summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/digitallogic/adl855pc/Kconfig2
-rw-r--r--src/mainboard/digitallogic/adl855pc/devicetree.cb2
-rw-r--r--src/mainboard/digitallogic/adl855pc/romstage.c8
-rw-r--r--src/northbridge/intel/Kconfig3
-rw-r--r--src/northbridge/intel/Makefile.inc3
-rw-r--r--src/northbridge/intel/i855/Kconfig (renamed from src/northbridge/intel/i855pm/Kconfig)2
-rw-r--r--src/northbridge/intel/i855/Makefile.inc (renamed from src/northbridge/intel/i855gme/Makefile.inc)0
-rw-r--r--src/northbridge/intel/i855/chip.h (renamed from src/northbridge/intel/i855gme/chip.h)4
-rw-r--r--src/northbridge/intel/i855/debug.c (renamed from src/northbridge/intel/i855gme/debug.c)0
-rw-r--r--src/northbridge/intel/i855/northbridge.c (renamed from src/northbridge/intel/i855gme/northbridge.c)4
-rw-r--r--src/northbridge/intel/i855/raminit.c (renamed from src/northbridge/intel/i855gme/raminit.c)0
-rw-r--r--src/northbridge/intel/i855/raminit.h (renamed from src/northbridge/intel/i855gme/raminit.h)0
-rw-r--r--src/northbridge/intel/i855/reset_test.c (renamed from src/northbridge/intel/i855gme/reset_test.c)0
-rw-r--r--src/northbridge/intel/i855gme/Kconfig4
-rw-r--r--src/northbridge/intel/i855pm/Makefile.inc1
-rw-r--r--src/northbridge/intel/i855pm/chip.h5
-rw-r--r--src/northbridge/intel/i855pm/debug.c164
-rw-r--r--src/northbridge/intel/i855pm/northbridge.c151
-rw-r--r--src/northbridge/intel/i855pm/raminit.c1594
-rw-r--r--src/northbridge/intel/i855pm/raminit.h12
-rw-r--r--src/northbridge/intel/i855pm/reset_test.c19
21 files changed, 13 insertions, 1965 deletions
diff --git a/src/mainboard/digitallogic/adl855pc/Kconfig b/src/mainboard/digitallogic/adl855pc/Kconfig
index 2d99128d18..fd109e9d64 100644
--- a/src/mainboard/digitallogic/adl855pc/Kconfig
+++ b/src/mainboard/digitallogic/adl855pc/Kconfig
@@ -2,7 +2,7 @@ config BOARD_DIGITALLOGIC_ADL855PC
bool "smartModule855"
select ARCH_X86
select CPU_INTEL_SOCKET_MPGA479M
- select NORTHBRIDGE_INTEL_I855PM
+ select NORTHBRIDGE_INTEL_I855
select SOUTHBRIDGE_INTEL_I82801DBM
select SUPERIO_WINBOND_W83627HF
select ROMCC
diff --git a/src/mainboard/digitallogic/adl855pc/devicetree.cb b/src/mainboard/digitallogic/adl855pc/devicetree.cb
index f0106b0648..0f600ac8f1 100644
--- a/src/mainboard/digitallogic/adl855pc/devicetree.cb
+++ b/src/mainboard/digitallogic/adl855pc/devicetree.cb
@@ -1,4 +1,4 @@
-chip northbridge/intel/i855pm
+chip northbridge/intel/i855
device pci_domain 0 on
device pci 0.0 on end
device pci 1.0 on end
diff --git a/src/mainboard/digitallogic/adl855pc/romstage.c b/src/mainboard/digitallogic/adl855pc/romstage.c
index cbd8bb0488..16d9195d38 100644
--- a/src/mainboard/digitallogic/adl855pc/romstage.c
+++ b/src/mainboard/digitallogic/adl855pc/romstage.c
@@ -17,7 +17,7 @@
#include "arch/i386/lib/console.c"
#include "lib/ramtest.c"
#include "southbridge/intel/i82801dbm/i82801dbm_early_smbus.c"
-#include "northbridge/intel/i855pm/raminit.h"
+#include "northbridge/intel/i855/raminit.h"
#if 0
#include "cpu/p6/apic_timer.c"
@@ -25,7 +25,7 @@
#endif
#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/intel/i855pm/debug.c"
+#include "northbridge/intel/i855/debug.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
@@ -57,8 +57,8 @@ static inline int spd_read_byte(unsigned device, unsigned address)
return smbus_read_byte(device, address);
}
-#include "northbridge/intel/i855pm/raminit.c"
-#include "northbridge/intel/i855pm/reset_test.c"
+#include "northbridge/intel/i855/raminit.c"
+#include "northbridge/intel/i855/reset_test.c"
#include "lib/generic_sdram.c"
static void main(unsigned long bist)
diff --git a/src/northbridge/intel/Kconfig b/src/northbridge/intel/Kconfig
index 983aca86d1..1f2c5edb0a 100644
--- a/src/northbridge/intel/Kconfig
+++ b/src/northbridge/intel/Kconfig
@@ -6,6 +6,5 @@ source src/northbridge/intel/i440bx/Kconfig
source src/northbridge/intel/i440lx/Kconfig
source src/northbridge/intel/i82810/Kconfig
source src/northbridge/intel/i82830/Kconfig
-source src/northbridge/intel/i855gme/Kconfig
-source src/northbridge/intel/i855pm/Kconfig
+source src/northbridge/intel/i855/Kconfig
source src/northbridge/intel/i945/Kconfig
diff --git a/src/northbridge/intel/Makefile.inc b/src/northbridge/intel/Makefile.inc
index fa04dd20d5..4a150df13d 100644
--- a/src/northbridge/intel/Makefile.inc
+++ b/src/northbridge/intel/Makefile.inc
@@ -6,6 +6,5 @@ subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I440BX) += i440bx
subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I440LX) += i440lx
subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I82810) += i82810
subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I82830) += i82830
-subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I855GME) += i855gme
-subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I855PM) += i855pm
+subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I855) += i855
subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I945) += i945
diff --git a/src/northbridge/intel/i855pm/Kconfig b/src/northbridge/intel/i855/Kconfig
index 9516c1471b..e76c1c8d0f 100644
--- a/src/northbridge/intel/i855pm/Kconfig
+++ b/src/northbridge/intel/i855/Kconfig
@@ -1,4 +1,4 @@
-config NORTHBRIDGE_INTEL_I855PM
+config NORTHBRIDGE_INTEL_I855
bool
select HAVE_HIGH_TABLES
diff --git a/src/northbridge/intel/i855gme/Makefile.inc b/src/northbridge/intel/i855/Makefile.inc
index ea44b26cbe..ea44b26cbe 100644
--- a/src/northbridge/intel/i855gme/Makefile.inc
+++ b/src/northbridge/intel/i855/Makefile.inc
diff --git a/src/northbridge/intel/i855gme/chip.h b/src/northbridge/intel/i855/chip.h
index 3e1514a59c..f98fe7b40a 100644
--- a/src/northbridge/intel/i855gme/chip.h
+++ b/src/northbridge/intel/i855/chip.h
@@ -18,8 +18,8 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-struct northbridge_intel_i855gme_config
+struct northbridge_intel_i855_config
{
};
-extern struct chip_operations northbridge_intel_i855gme_ops;
+extern struct chip_operations northbridge_intel_i855_ops;
diff --git a/src/northbridge/intel/i855gme/debug.c b/src/northbridge/intel/i855/debug.c
index 4083add6f1..4083add6f1 100644
--- a/src/northbridge/intel/i855gme/debug.c
+++ b/src/northbridge/intel/i855/debug.c
diff --git a/src/northbridge/intel/i855gme/northbridge.c b/src/northbridge/intel/i855/northbridge.c
index 932409aead..e33338ec66 100644
--- a/src/northbridge/intel/i855gme/northbridge.c
+++ b/src/northbridge/intel/i855/northbridge.c
@@ -177,7 +177,7 @@ static void enable_dev(struct device *dev)
}
}
-struct chip_operations northbridge_intel_i855gme_ops = {
- CHIP_NAME("Intel 855GME Northbridge")
+struct chip_operations northbridge_intel_i855_ops = {
+ CHIP_NAME("Intel 855 Northbridge")
.enable_dev = enable_dev,
};
diff --git a/src/northbridge/intel/i855gme/raminit.c b/src/northbridge/intel/i855/raminit.c
index 8e928bd279..8e928bd279 100644
--- a/src/northbridge/intel/i855gme/raminit.c
+++ b/src/northbridge/intel/i855/raminit.c
diff --git a/src/northbridge/intel/i855gme/raminit.h b/src/northbridge/intel/i855/raminit.h
index a312ee511f..a312ee511f 100644
--- a/src/northbridge/intel/i855gme/raminit.h
+++ b/src/northbridge/intel/i855/raminit.h
diff --git a/src/northbridge/intel/i855gme/reset_test.c b/src/northbridge/intel/i855/reset_test.c
index b48b4a3764..b48b4a3764 100644
--- a/src/northbridge/intel/i855gme/reset_test.c
+++ b/src/northbridge/intel/i855/reset_test.c
diff --git a/src/northbridge/intel/i855gme/Kconfig b/src/northbridge/intel/i855gme/Kconfig
deleted file mode 100644
index eba71fc933..0000000000
--- a/src/northbridge/intel/i855gme/Kconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-config NORTHBRIDGE_INTEL_I855GME
- bool
- select HAVE_HIGH_TABLES
-
diff --git a/src/northbridge/intel/i855pm/Makefile.inc b/src/northbridge/intel/i855pm/Makefile.inc
deleted file mode 100644
index ea44b26cbe..0000000000
--- a/src/northbridge/intel/i855pm/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += northbridge.o
diff --git a/src/northbridge/intel/i855pm/chip.h b/src/northbridge/intel/i855pm/chip.h
deleted file mode 100644
index 9b14183aad..0000000000
--- a/src/northbridge/intel/i855pm/chip.h
+++ /dev/null
@@ -1,5 +0,0 @@
-struct northbridge_intel_i855pm_config
-{
-};
-
-extern struct chip_operations northbridge_intel_i855pm_ops;
diff --git a/src/northbridge/intel/i855pm/debug.c b/src/northbridge/intel/i855pm/debug.c
deleted file mode 100644
index 7b854455a9..0000000000
--- a/src/northbridge/intel/i855pm/debug.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * generic K8 debug code, used by mainboard specific romstage.c
- *
- */
-#if 1
-static void print_debug_pci_dev(unsigned dev)
-{
- print_debug("PCI: ");
- print_debug_hex8((dev >> 16) & 0xff);
- print_debug_char(':');
- print_debug_hex8((dev >> 11) & 0x1f);
- print_debug_char('.');
- print_debug_hex8((dev >> 8) & 7);
-}
-
-static void print_pci_devices(void)
-{
- device_t dev;
- for(dev = PCI_DEV(0, 0, 0);
- dev <= PCI_DEV(0, 0x1f, 0x7);
- dev += PCI_DEV(0,0,1)) {
- uint32_t id;
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- continue;
- }
- print_debug_pci_dev(dev);
- print_debug("\r\n");
- }
-}
-
-static void dump_pci_device(unsigned dev)
-{
- int i;
- print_debug_pci_dev(dev);
- print_debug("\r\n");
-
- for(i = 0; i <= 255; i++) {
- unsigned char val;
- if ((i & 0x0f) == 0) {
- print_debug_hex8(i);
- print_debug_char(':');
- }
- val = pci_read_config8(dev, i);
- print_debug_char(' ');
- print_debug_hex8(val);
- if ((i & 0x0f) == 0x0f) {
- print_debug("\r\n");
- }
- }
-}
-
-static void dump_pci_devices(void)
-{
- device_t dev;
- for(dev = PCI_DEV(0, 0, 0);
- dev <= PCI_DEV(0, 0x1f, 0x7);
- dev += PCI_DEV(0,0,1)) {
- uint32_t id;
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- continue;
- }
- dump_pci_device(dev);
- }
-}
-
-static void dump_spd_registers(const struct mem_controller *ctrl)
-{
- int i;
- print_debug("\r\n");
- for(i = 0; i < 4; i++) {
- unsigned device;
- device = ctrl->channel0[i];
- if (device) {
- int j;
- print_debug("dimm: ");
- print_debug_hex8(i);
- print_debug(".0: ");
- print_debug_hex8(device);
- for(j = 0; j < 256; j++) {
- int status;
- unsigned char byte;
- if ((j & 0xf) == 0) {
- print_debug("\r\n");
- print_debug_hex8(j);
- print_debug(": ");
- }
- status = smbus_read_byte(device, j);
- if (status < 0) {
- print_debug("bad device\r\n");
- break;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
- }
- print_debug("\r\n");
- }
-#if 0
- device = ctrl->channel1[i];
- if (device) {
- int j;
- print_debug("dimm: ");
- print_debug_hex8(i);
- print_debug(".1: ");
- print_debug_hex8(device);
- for(j = 0; j < 256; j++) {
- int status;
- unsigned char byte;
- if ((j & 0xf) == 0) {
- print_debug("\r\n");
- print_debug_hex8(j);
- print_debug(": ");
- }
- status = smbus_read_byte(device, j);
- if (status < 0) {
- print_debug("bad device\r\n");
- break;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
- }
- print_debug("\r\n");
- }
-#endif
- }
-}
-static void dump_smbus_registers(void)
-{
- int i;
- print_debug("\r\n");
- for(i = 1; i < 0x80; i++) {
- unsigned device;
- device = i;
- int j;
- print_debug("smbus: ");
- print_debug_hex8(device);
- for(j = 0; j < 256; j++) {
- int status;
- unsigned char byte;
- if ((j & 0xf) == 0) {
- print_debug("\r\n");
- print_debug_hex8(j);
- print_debug(": ");
- }
- status = smbus_read_byte(device, j);
- if (status < 0) {
- print_debug("bad device\r\n");
- break;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
- }
- print_debug("\r\n");
- }
-}
-#endif
diff --git a/src/northbridge/intel/i855pm/northbridge.c b/src/northbridge/intel/i855pm/northbridge.c
deleted file mode 100644
index ded93ba753..0000000000
--- a/src/northbridge/intel/i855pm/northbridge.c
+++ /dev/null
@@ -1,151 +0,0 @@
-#include <console/console.h>
-#include <arch/io.h>
-#include <stdint.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <cpu/cpu.h>
-#include <stdlib.h>
-#include <string.h>
-#include <bitops.h>
-#include "chip.h"
-
-static void ram_resource(device_t dev, unsigned long index,
- unsigned long basek, unsigned long sizek)
-{
- struct resource *resource;
-
- if (!sizek) {
- return;
- }
- resource = new_resource(dev, index);
- resource->base = ((resource_t)basek) << 10;
- resource->size = ((resource_t)sizek) << 10;
- resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | \
- IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
-}
-
-static void tolm_test(void *gp, struct device *dev, struct resource *new)
-{
- struct resource **best_p = gp;
- struct resource *best;
- best = *best_p;
- if (!best || (best->base > new->base)) {
- best = new;
- }
- *best_p = best;
-}
-
-static uint32_t find_pci_tolm(struct bus *bus)
-{
- struct resource *min;
- uint32_t tolm;
- min = 0;
- search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min);
- tolm = 0xffffffffUL;
- if (min && tolm > min->base) {
- tolm = min->base;
- }
- return tolm;
-}
-
-#if CONFIG_WRITE_HIGH_TABLES==1
-#define HIGH_TABLES_SIZE 64 // maximum size of high tables in KB
-extern uint64_t high_tables_base, high_tables_size;
-#endif
-
-static void pci_domain_set_resources(device_t dev)
-{
- device_t mc_dev;
- uint32_t pci_tolm;
-
- pci_tolm = find_pci_tolm(&dev->link[0]);
- mc_dev = dev->link[0].children;
- if (mc_dev) {
- /* Figure out which areas are/should be occupied by RAM.
- * This is all computed in kilobytes and converted to/from
- * the memory controller right at the edges.
- * Having different variables in different units is
- * too confusing to get right. Kilobytes are good up to
- * 4 Terabytes of RAM...
- */
- uint16_t tolm_r;
- unsigned long tomk, tolmk;
- int idx;
-
- /* Get the value of the highest DRB. This tells the end of
- * the physical memory. The units are ticks of 32MB
- * i.e. 1 means 32MB.
- */
- tomk = ((unsigned long)pci_read_config8(mc_dev, 0x63)) << 15;
- /* Compute the top of Low memory */
- tolmk = pci_tolm >> 10;
- if (tolmk >= tomk) {
- /* The PCI hole does does not overlap the memory.
- */
- tolmk = tomk;
- }
- /* Write the ram configuration registers,
- * preserving the reserved bits.
- */
- tolm_r = pci_read_config16(mc_dev, 0xc4);
- tolm_r = ((tolmk >> 10) << 3) | (tolm_r & 0xf);
- pci_write_config16(mc_dev, 0xc4, tolm_r);
-
- /* Report the memory regions */
- idx = 10;
- ram_resource(dev, idx++, 0, 640);
- ram_resource(dev, idx++, 768, tolmk - 768);
-
-#if CONFIG_WRITE_HIGH_TABLES==1
- /* Leave some space for ACPI, PIRQ and MP tables */
- high_tables_base = (tomk - HIGH_TABLES_SIZE) * 1024;
- high_tables_size = HIGH_TABLES_SIZE * 1024;
-#endif
- }
- assign_resources(&dev->link[0]);
-}
-
-static struct device_operations pci_domain_ops = {
- .read_resources = pci_domain_read_resources,
- .set_resources = pci_domain_set_resources,
- .enable_resources = enable_childrens_resources,
- .init = 0,
- .scan_bus = pci_domain_scan_bus,
-};
-
-static void cpu_bus_init(device_t dev)
-{
- initialize_cpus(&dev->link[0]);
-}
-
-static void cpu_bus_noop(device_t dev)
-{
-}
-
-static struct device_operations cpu_bus_ops = {
- .read_resources = cpu_bus_noop,
- .set_resources = cpu_bus_noop,
- .enable_resources = cpu_bus_noop,
- .init = cpu_bus_init,
- .scan_bus = 0,
-};
-
-static void enable_dev(struct device *dev)
-{
- struct device_path path;
-
- /* Set the operations if it is a special bus type */
- if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
- dev->ops = &pci_domain_ops;
- pci_set_method(dev);
- }
- else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) {
- dev->ops = &cpu_bus_ops;
- }
-}
-
-struct chip_operations northbridge_intel_i855pm_ops = {
- CHIP_NAME("Intel 855PM Northbridge")
- .enable_dev = enable_dev,
-};
diff --git a/src/northbridge/intel/i855pm/raminit.c b/src/northbridge/intel/i855pm/raminit.c
deleted file mode 100644
index 8e97c10bd0..0000000000
--- a/src/northbridge/intel/i855pm/raminit.c
+++ /dev/null
@@ -1,1594 +0,0 @@
-/* This was originally for the e7500, modified for i855pm
- */
-
-/* the 855pm uses only
- * memory type (must be ddr)
- * number of row addresses, not counting bank addresses
- * number of column addresses
- * number of so-dimm banks
- * ecc, no ecc
- * refresh rate/type
- * number banks on each device
- *
- * that's it. No other bytes are used.
- * these are bytes
- * 2, 3, 4, 5, 11, 12 17
- */
-
-/* converted to C 6/2004 yhlu */
-
-#define DEBUG_RAM_CONFIG 2
-#undef ASM_CONSOLE_LOGLEVEL
-#define ASM_CONSOLE_LOGLEVEL 8
-#define dumpnorth() dump_pci_device(PCI_DEV(0, 0, 1))
-
-/* DDR DIMM Mode register Definitions */
-
-#define BURST_2 (1<<0)
-#define BURST_4 (2<<0)
-#define BURST_8 (3<<0)
-
-#define BURST_SEQUENTIAL (0<<3)
-#define BURST_INTERLEAVED (1<<3)
-
-#define CAS_2_0 (0x2<<4)
-#define CAS_3_0 (0x3<<4)
-#define CAS_1_5 (0x5<<4)
-#define CAS_2_5 (0x6<<4)
-
-#define MODE_NORM (0 << 7)
-#define MODE_DLL_RESET (2 << 7)
-#define MODE_TEST (1 << 7)
-
-#define BURST_LENGTH BURST_4
-#define BURST_TYPE BURST_INTERLEAVED
-#define CAS_LATENCY CAS_2_0
-/*#define CAS_LATENCY CAS_2_5*/
-/*#define CAS_LATENCY CAS_1_5*/
-
-/* WOW! this could be bad! sets casl to 2 without checking! */
-#define MRS_VALUE (MODE_NORM | CAS_LATENCY | BURST_TYPE | BURST_LENGTH)
-#define EMRS_VALUE 0x000
-
-#define MD_SHIFT 4
-
-#define RAM_COMMAND_NONE 0x0
-#define RAM_COMMAND_NOP 0x1
-#define RAM_COMMAND_PRECHARGE 0x2
-#define RAM_COMMAND_MRS 0x3
-#define RAM_COMMAND_EMRS 0x4
-#define RAM_COMMAND_CBR 0x6
-#define RAM_COMMAND_NORMAL 0x7
-
-
-static inline void do_ram_command (const struct mem_controller *ctrl, uint32_t value) {
- uint32_t dword;
- uint8_t byte;
- int i;
- uint32_t result;
-#if DEBUG_RAM_CONFIG >=2
- print_debug("P:");
- print_debug_hex8(value);
- print_debug("\r\n");
-#endif
- /* %ecx - initial address to read from */
- /* Compute the offset */
- dword = value >> 16;
- /* for(i=0;i<4;i++) {*/
- for(i=0;i<1;i++) {
- /* Set the ram command */
- byte = pci_read_config8(ctrl->d0, 0x70);
- byte &= 0x8f;
- byte |= (uint8_t)(value & 0xff);
-#if DEBUG_RAM_CONFIG
- print_debug("R:");
- print_debug_hex8(byte);
- print_debug("\r\n");
-#endif
-
- pci_write_config8(ctrl->d0, 0x70, byte);
-
- /* Assert the command to the memory */
-#if DEBUG_RAM_CONFIG >= 2
- print_debug("R:");
- print_debug_hex32(dword);
- print_debug("\r\n");
-#endif
-
- result = read32(dword);
-
-#if DEBUG_RAM_CONFIG
- print_debug("Done\r\n");
-#endif
- /* Go to the next base address */
- dword += 0x0200000;
-
- }
-
- /* The command has been sent to all dimms so get out */
-}
-
-static inline void RAM_CMD(const struct mem_controller *ctrl, uint32_t command, uint32_t offset) {
- uint32_t value = ((offset) << (MD_SHIFT + 16))|((command << 4) & 0x70) ;
- do_ram_command(ctrl, value);
-}
-
-#define RAM_NOP(ctrl) RAM_CMD(ctrl, RAM_COMMAND_NOP, 0)
-#define RAM_PRECHARGE(ctrl) RAM_CMD(ctrl, RAM_COMMAND_PRECHARGE, 0)
-#define RAM_CBR(ctrl) RAM_CMD(ctrl, RAM_COMMAND_CBR, 0)
-#define RAM_EMRS(ctrl) RAM_CMD(ctrl, RAM_COMMAND_EMRS, EMRS_VALUE)
-
-static const uint8_t ram_cas_latency[] = {
- CAS_2_5, CAS_2_0, CAS_1_5, CAS_2_5
- };
-
-static inline void ram_mrs(const struct mem_controller *ctrl, uint32_t value){
- /* Read the cas latency setting */
- uint8_t byte;
- uint32_t dword;
- byte = pci_read_config8(ctrl->d0, 0x60);
- /* Transform it into the form expected by SDRAM */
- dword = ram_cas_latency[(byte>>5) & 1];
-#warning RAM_MRS -- using BROKEN hard-wired CAS 2.0. FIX ME SOON
-/*
- */
- value |= (dword<<(16+MD_SHIFT));
-
- value |= (MODE_NORM | BURST_TYPE | BURST_LENGTH) << (16+MD_SHIFT);
-
- do_ram_command(ctrl, value);
-}
-
-#define RAM_MRS(ctrl, dll_reset) ram_mrs( ctrl, (dll_reset << (8+MD_SHIFT+ 16)) | ((RAM_COMMAND_MRS <<4)& 0x70) )
-
-static void RAM_NORMAL(const struct mem_controller *ctrl) {
- uint8_t byte;
- byte = pci_read_config8(ctrl->d0, 0x70);
- byte &= 0x8f;
- byte |= (RAM_COMMAND_NORMAL << 4);
- pci_write_config8(ctrl->d0, 0x70, byte);
-}
-
-static void RAM_RESET_DDR_PTR(const struct mem_controller *ctrl) {
- uint8_t byte;
- byte = pci_read_config8(ctrl->d0, 0x88);
- byte |= (1 << 4 );
- pci_write_config8(ctrl->d0, 0x88, byte);
- byte = pci_read_config8(ctrl->d0, 0x88);
- byte &= ~(1 << 4);
- pci_write_config8(ctrl->d0, 0x88, byte);
-}
-
-static void ENABLE_REFRESH(const struct mem_controller *ctrl)
-{
- uint32_t dword;
- dword = pci_read_config32(ctrl->d0, 0x70);
- dword |= (1 << 29);
- pci_write_config32(ctrl->d0, 0x70, dword);
-}
-
- /*
- * Table: constant_register_values
- */
-static const long register_values[] = {
- /* DRB - DRAM Row Boundary Registers
- * 0x60 - 0x63
- * An array of 8 byte registers, which hold the ending
- * memory address assigned to each pair of DIMMS, in 32MB
- * granularity.
- */
- /* Conservatively say each row has 32MB of ram, we will fix this up later */
- 0x40, 0x00000000, (0x01 << 0) | (0x02 << 8) | (0x03 << 16) | (0x04 << 24),
- /* DRA - DRAM Row Attribute Register
- * 0x70 Row 0,1
- * 0x71 Row 2,3
- * [2:0] Row Attributes for both rows
- * 001 == 2KB
- * 010 == 4KB
- * 011 == 8KB
- * 100 == 16KB
- * Others == Reserved
- */
- /* leave it alone for now -- seems bad to set it at all
- 0x70, 0x00000000,
- (((0<<3)|(0<<0))<< 0) |
- (((0<<3)|(0<<0))<< 4) |
- (((0<<3)|(0<<0))<< 8) |
- (((0<<3)|(0<<0))<<12) |
- (((0<<3)|(0<<0))<<16) |
- (((0<<3)|(0<<0))<<20) |
- (((0<<3)|(0<<0))<<24) |
- (((0<<3)|(0<<0))<<28),
- */
- /* DRT - DRAM Time Register
- * 0x60
- * [31:31] tWTR -- MBZ
- * [30:30] tWR 0 is 2, 1 is 3 clocks
- * [29:28] back to back write-read commands spacing
- * different rows
- * 00 4, 01 3, 10 2, 11 reserved
- *
- * [27:26] same or different
- * CL + .5x BL + TA(RD-WR) - DQSS
- * wow that's hard!
- * 00 7, 01 6, 10 5, 11 4
- * 00 4, 01 3, 10 2, 11 reserved
- *
- * [25:25] Back to Back Read-read spacing
- * .5xBL + TA(RD-RD)
- * 0 4 , 1 3
- *
- * [24:15] Reserved
- *
- * [14:12] Refresh cycle time
- * 000 14, 001 13, 010 12, 011 11, 100 10, 101 9, 110 8, 111 7
- *
- * [11:11] tRAS, max
- * 0 120 us, 1 reserved
- *
- * [10:09] Active to Precharge (tRAS)
- * 00 == 8 clocks
- * 01 == 7 clocks
- * 10 == 6 clocks
- * 11 == 5 clocks
- * [08:07] Reserved
- * [06:05] Cas Latency (tCL)
- * 00 == 2.5 Clocks
- * 01 == 2.0 Clocks (default)
- * 10 == Reserved
- * 11 == Reserved
- * [04:04] Reserved
- * [03:02] Ras# to Cas# Delay (tRCD)
- * 00 == 4 DRAM Clocks
- * 01 == 3 DRAM Clocks
- * 10 == 2 DRAM Clocks
- * 11 == reserved
- * [01:00] DRAM RAS# to Precharge (tRP)
- * 00 == 4 DRAM Clocks
- * 01 == 3 DRAM Clocks
- * 10 == 2 DRAM Clocks
- * 11 == reserved
- */
-
-#define DRT_CAS_2_5 (0<<5)
-#define DRT_CAS_2_0 (1<<5)
-#define DRT_CAS_MASK (3<<5)
-
-#if CAS_LATENCY == CAS_2_5
-#define DRT_CL DRT_CAS_2_5
-#elif CAS_LATENCY == CAS_2_0
-#define DRT_CL DRT_CAS_2_0
-#endif
-
- /* bios is 0x2a004425 */
- /* default hardware is 18004425 */
- /* no setting for now */
-
- /* FDHC - Fixed DRAM Hole Control
- * 0x97
- * [7:7] Hole_Enable
- * 0 == No memory Hole
- * 1 == Memory Hole from 15MB to 16MB
- * [6:0] Reserved
- *
- * PAM - Programmable Attribute Map
- * 0x90 [3:0] Reserved
- * 0x90 [5:4] 0xF0000 - 0xFFFFF
- * 0x91 [1:0] 0xC0000 - 0xC3FFF
- * 0x91 [5:4] 0xC4000 - 0xC7FFF
- * 0x92 [1:0] 0xC8000 - 0xCBFFF
- * 0x92 [5:4] 0xCC000 - 0xCFFFF
- * 0x93 [1:0] 0xD0000 - 0xD3FFF
- * 0x93 [5:4] 0xD4000 - 0xD7FFF
- * 0x94 [1:0] 0xD8000 - 0xDBFFF
- * 0x94 [5:4] 0xDC000 - 0xDFFFF
- * 0x95 [1:0] 0xE0000 - 0xE3FFF
- * 0x95 [5:4] 0xE4000 - 0xE7FFF
- * 0x96 [1:0] 0xE8000 - 0xEBFFF
- * 0x96 [5:4] 0xEC000 - 0xEFFFF
- * 00 == DRAM Disabled (All Access go to memory mapped I/O space)
- * 01 == Read Only (Reads to DRAM, Writes to memory mapped I/O space)
- * 10 == Write Only (Writes to DRAM, Reads to memory mapped I/O space)
- * 11 == Normal (All Access go to DRAM)
- */
- /* 0x90, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24),*/
- /*0x94, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24),*/
-
-
- /* FIXME why was I attempting to set a reserved bit? */
- /* 0x0100040f */
-
- /* DRC - DRAM Contoller Mode Register
- * 0x7c
- * [31:30] Rev #
- * [29:29] Initialization Complete
- * 0 == Not Complete
- * 1 == Complete
- * [28:27] Dynamic Power Down Enable (leave at 0 for now)
- * [27:24] Reserved
- * [23:23] Reduced Comamnd Drive Delay (leave at 0 for now)
- * [22:22] Reduced Command Drive Enable (leave at 0 for now)
- * [21:21] DRAM Data Integrity Mode
- * 0 == Disabled, no ECC
- * 1 == Error checking, with correction
- * [20:20] Reserved
- * [19:18] Reserved
- * Must equal 00
- * [17:17] (Intel Undocumented) should always be set to
- * [16:16] Disable SCK Tri-state in C3/S1-m
- * 0 == 2n Rule
- * 1 == 1n rule
- * [15:14] Reserved
- * [13:13] Dynamic CS Disable
- * [12:12] SM Interface Tristate enable
- * [11:11] Reserved
- * [10:08] Refresh mode select
- * 000 == Refresh disabled
- * 001 == Refresh interval 15.6 usec
- * 010 == Refresh interval 7.8 usec
- * 011 == Refresh interval 64 usec
- * 111 == Reserved
- * [07:07] Reserved
- * [06:04] Mode Select (SMS)
- * 000 == Self Refresh Mode
- * 001 == NOP Command
- * 010 == All Banks Precharge
- * 011 == Mode Register Set
- * 100 == Extended Mode Register Set
- * 101 == Reserved
- * 110 == CBR Refresh
- * 111 == Normal Operation
- * [03:01] Reserved
- * [00:00] DRAM type --hardwired to 1 to indicate DDR
- */
- 0x70, 0xdf0f6c7f, 0,
- /* undocumnted shit */
- 0x80, 0, 0xaf0031,
-
-};
-
-
- /*
- * Routine: ram_set_registers
- * Arguments: none
- * Results: none
- * Trashed: %eax, %ebx, %ecx, %edx, %esi, %eflags
- * Effects: Do basic ram setup that does not depend on serial
- * presence detect information.
- * This sets PCI configuration registers to known good
- * values based on the table:
- * constant_register_values
- * Which are a triple of configuration regiser, mask, and value.
- *
- */
-
-static void write_8dwords(uint32_t src_addr, uint32_t dst_addr) {
- int i;
- uint32_t dword;
- for(i=0;i<8;i++) {
- dword = read32(src_addr);
- write32(dst_addr, dword);
- src_addr+=4;
- dst_addr+=4;
-
- }
-}
-
-/*#define SLOW_DOWN_IO inb(0x80);*/
-#define SLOW_DOWN_IO udelay(40);
-
-
-static void ram_set_d0f0_regs(const struct mem_controller *ctrl) {
-#if DEBUG_RAM_CONFIG
- //dumpnorth();
-#endif
- int i;
- int max;
- max = ARRAY_SIZE(register_values);
- for(i = 0; i < max; i += 3) {
- uint32_t reg;
-#if DEBUG_RAM_CONFIG >=2
- print_debug_hex32(register_values[i]);
- print_debug(" <-");
- print_debug_hex32(register_values[i+2]);
- print_debug("\r\n");
-#endif
- reg = pci_read_config32(ctrl->d0,register_values[i]);
- reg &= register_values[i+1];
- reg |= register_values[i+2] & ~(register_values[i+1]);
- pci_write_config32(ctrl->d0,register_values[i], reg);
-
-
- }
-#if DEBUG_RAM_CONFIG
- dumpnorth();
-#endif
-}
-static void sdram_set_registers(const struct mem_controller *ctrl){
- ram_set_d0f0_regs(ctrl);
-}
-
-
- /*
- * Routine: sdram_spd_get_page_size
- * Arguments: %bl SMBUS_MEM_DEVICE
- * Results:
- * %edi log base 2 page size of DIMM side 1 in bits
- * %esi log base 2 page size of DIMM side 2 in bits
- *
- * Preserved: %ebx (except %bh), %ebp
- *
- * Trashed: %eax, %bh, %ecx, %edx, %esp, %eflags
- * Used: %eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags
- *
- * Effects: Uses serial presence detect to set %edi & %esi
- * to the page size of a dimm.
- * Notes:
- * %bl SMBUS_MEM_DEVICE
- * %edi holds the page size for the first side of the DIMM.
- * %esi holds the page size for the second side of the DIMM.
- * memory size is represent as a power of 2.
- *
- * This routine may be worth moving into generic code somewhere.
- */
-struct dimm_page_size {
- unsigned long side1;
- unsigned long side2;
-};
-
-static struct dimm_page_size sdram_spd_get_page_size(unsigned device) {
-
- uint32_t ecx;
- int value;
- struct dimm_page_size pgsz;
-
- pgsz.side1 = 0;
- pgsz.side2 = 0;
-
- value = spd_read_byte(device, 4); /* columns */
- if(value < 0) goto hw_err;
- pgsz.side1 = value & 0xf;
-
- /* Get the module data width and convert it to a power of two */
- value = spd_read_byte(device,7); /* (high byte) */
- if(value < 0) goto hw_err;
- ecx = value & 0xff;
- ecx <<= 8;
-
- value = spd_read_byte(device, 6); /* (low byte) */
- if(value < 0) goto hw_err;
- ecx |= (value & 0xff);
-
- pgsz.side1 += log2(ecx); /* compute cheap log base 2 */
-
- /* side two */
- value = spd_read_byte(device, 5); /* number of physical banks */
- if(value < 0) goto hw_err;
- if(value==1) goto out;
- if(value!=2) goto val_err;
-
- /* Start with the symmetrical case */
- pgsz.side2 = pgsz.side1;
- value = spd_read_byte(device,4); /* columns */
- if(value < 0) goto hw_err;
- if((value & 0xf0)==0 ) goto out;
- pgsz.side2 -=value & 0xf; /* Subtract out columns on side 1 */
- pgsz.side2 +=(value>>4)& 0xf; /* Add in columns on side 2 */
- goto out;
-
- val_err:
- die("Bad SPD value\r\n");
- /* If an hw_error occurs report that I have no memory */
-hw_err:
- pgsz.side1 = 0;
- pgsz.side2 = 0;
-out:
- return pgsz;
-}
-
-
- /*
- * Routine: sdram_spd_get_width
- * Arguments: %bl SMBUS_MEM_DEVICE
- * Results:
- * %edi width of SDRAM chips on DIMM side 1 in bits
- * %esi width of SDRAM chips on DIMM side 2 in bits
- *
- * Preserved: %ebx (except %bh), %ebp
- *
- * Trashed: %eax, %bh, %ecx, %edx, %esp, %eflags
- * Used: %eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags
- *
- * Effects: Uses serial presence detect to set %edi & %esi
- * to the width of a dimm.
- * Notes:
- * %bl SMBUS_MEM_DEVICE
- * %edi holds the width for the first side of the DIMM.
- * %esi holds the width for the second side of the DIMM.
- * memory size is represent as a power of 2.
- *
- * This routine may be worth moving into generic code somewhere.
- */
-struct dimm_width {
- unsigned side1;
- unsigned side2;
-};
-
-static struct dimm_width sdram_spd_get_width(unsigned device) {
- int value;
- struct dimm_width wd;
- uint32_t ecx;
-
- wd.side1 = 0;
- wd.side2 = 0;
-
- value = spd_read_byte(device, 13); /* sdram width */
- if(value < 0 ) goto hw_err;
- ecx = value;
-
- wd.side1 = value & 0x7f;
-
- /* side two */
- value = spd_read_byte(device, 5); /* number of physical banks */
- if(value < 0 ) goto hw_err;
- if(value <=1 ) goto out;
-
- /* Start with the symmetrical case */
- wd.side2 = wd.side1;
-
- if((ecx & 0x80)==0) goto out;
-
- wd.side2 <<=1;
-hw_err:
- wd.side1 = 0;
- wd.side2 = 0;
-
- out:
- return wd;
-}
-
- /*
- * Routine: sdram_spd_get_dimm_size
- * Arguments: %bl SMBUS_MEM_DEVICE
- * Results:
- * %edi log base 2 size of DIMM side 1 in bits
- * %esi log base 2 size of DIMM side 2 in bits
- *
- * Preserved: %ebx (except %bh), %ebp
- *
- * Trashed: %eax, %bh, %ecx, %edx, %esp, %eflags
- * Used: %eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags
- *
- * Effects: Uses serial presence detect to set %edi & %esi
- * the size of a dimm.
- * Notes:
- * %bl SMBUS_MEM_DEVICE
- * %edi holds the memory size for the first side of the DIMM.
- * %esi holds the memory size for the second side of the DIMM.
- * memory size is represent as a power of 2.
- *
- * This routine may be worth moving into generic code somewhere.
- */
-
-struct dimm_size {
- unsigned long side1;
- unsigned long side2;
-};
-
-static struct dimm_size spd_get_dimm_size(unsigned device)
-{
- /* Calculate the log base 2 size of a DIMM in bits */
- struct dimm_size sz;
- int value, low;
- sz.side1 = 0;
- sz.side2 = 0;
-
- /* Note it might be easier to use byte 31 here, it has the DIMM size as
- * a multiple of 4MB. The way we do it now we can size both
- * sides of an assymetric dimm.
- */
- /* the hell with that! just use byte 31 -- rgm */
- value = spd_read_byte(device, 31); /* size * 4 MB */
- value = log2(value);
- /* this is in 4 MB chunks, or 32 MBits chunks.
- * log base 2 of 32 Mbits is log2 of (32*1024*1024) is 25
- * so add 25
- */
- value += 25;
- sz.side1 = value;
- sz.side2 = 0;
-#if DEBUG_RAM_CONFIG
- print_debug("returned size log 2 in bits is :");
- print_debug_hex32(value);
- print_debug("\r\n");
-#endif
- goto out;
- val_err:
- die("Bad SPD value\r\n");
- /* If an hw_error occurs report that I have no memory */
-hw_err:
- sz.side1 = 0;
- sz.side2 = 0;
- out:
- return sz;
-}
-
-
-
- /*
- * This is a place holder fill this out
- * Routine: spd_set_row_attributes
- * Arguments: %bl SMBUS_MEM_DEVICE
- * Results:
- * %edi log base 2 size of DIMM side 1 in bits
- * %esi log base 2 size of DIMM side 2 in bits
- *
- * Preserved: %ebx (except %bh), %ebp
- *
- * Trashed: %eax, %bh, %ecx, %edx, %esp, %eflags
- * Used: %eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags
- *
- * Effects: Uses serial presence detect to set %edi & %esi
- * the size of a dimm.
- * Notes:
- * %bl SMBUS_MEM_DEVICE
- * %edi holds the memory size for the first side of the DIMM.
- * %esi holds the memory size for the second side of the DIMM.
- * memory size is represent as a power of 2.
- *
- * This routine may be worth moving into generic code somewhere.
- */
-static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_mask) {
- int i;
- uint16_t word=0x7777;
- int value;
-
-
- /* Walk through all dimms and find the interesection of the support
- * for ecc sdram and refresh rates
- */
-
-
- for(i = 0; i < DIMM_SOCKETS; i++) {
- if (!(dimm_mask & (1 << i))) {
- continue;
- }
- /* Test to see if I have ecc sdram */
- struct dimm_page_size sz;
- sz = sdram_spd_get_page_size(ctrl->channel0[i]); /* SDRAM type */
-#if DEBUG_RAM_CONFIG
- print_debug("page size =");
- print_debug_hex32(sz.side1);
- print_debug(" ");
- print_debug_hex32(sz.side2);
- print_debug("\r\n");
-#endif
-
- /* Test to see if the dimm is present */
- if( sz.side1 !=0) {
-
- /* Test for a valid dimm width */
- if((sz.side1 <15) || (sz.side1>18) ) {
- print_err("unsupported page size\r\n");
- }
-
- /* Convert to the format needed for the DRA register */
- /* subtract 3 (there are 8 bytes)
- * then subtract 11
- * (since 12 bit size should map to a value of 1)
- * so subtract 14 total
- */
- sz.side1-=14;
-
- /* Place in the %ebp the dra place holder */ /*i*/
- word &= ~(7<<i);
- word |= sz.side1<<(i<<3);
-
- /* Test to see if the second side is present */
-
- if( sz.side2 !=0) {
-
- /* Test for a valid dimm width */
- if((sz.side2 <15) || (sz.side2>18) ) {
- print_err("unsupported page size\r\n");
- }
-
- /* Convert to the format needed for the DRA register */
- sz.side2-=14;
-
- /* Place in the %ebp the dra place holder */ /*i*/
- word &= ~(7<<i);
- word |= sz.side2<<((i<<3) + 4 );
-
- }
- }
- /* go to the next DIMM */
- }
-
- /* Write the new row attributes register */
- pci_write_config32(ctrl->d0, 0x50, word);
-
- return dimm_mask;
-
-}
-#define spd_pre_init "Reading SPD data...\r\n"
-#define spd_pre_set "setting based on SPD data...\r\n"
-#define spd_post_init "done\r\n"
-
-
-static const uint32_t refresh_rate_rank[]= {
- /* Refresh rates ordered from most conservative (lowest)
- * to most agressive (highest)
- * disabled 0 -> rank 3
- * 15.6usec 1 -> rank 1
- * 7.8 usec 2 -> rank 0
- * 64usec 3 -> rank 2
- */
- 3, 1, 0, 2 };
-static const uint32_t refresh_rate_index[] = {
- /* Map the spd refresh rates to memory controller settings
- * 15.625us -> 15.6us
- * 3.9us -> err
- * 7.8us -> 7.8us
- * 31.3s -> 15.6us
- * 62.5us -> 15.6us
- * 125us -> 15.6us
- */
- 1, 0xff, 2, 1, 1, 1
-};
-#define MAX_SPD_REFRESH_RATE 5
-
-static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, long dimm_mask) {
-
- int i;
- uint32_t dword;
- int value;
- uint32_t ecx;
- uint32_t edx;
- /* on this chipset we only do refresh "slow" or "fast" for now */
- /* we start out assuming "slow" (15.6 microseconds) */
- uint32_t refrate = 1; /* better than 7.8 */
-
- /* Read the inititial state */
- dword = pci_read_config32(ctrl->d0, 0x70);
- /* WTF? */
- /*dword |= 0x10000;*/
-#if 0 /* DEBUG_RAM_CONFIG*/
- print_debug("spd_detect_dimms: 0x70.l is:");
- print_debug_hex32(dword);
- print_debug("\r\n");
-#endif
-
-#if 0
- /* Test if ECC cmos option is enabled */
- /* Clear the ecc enable */
-1:
-#endif
-
-
- /* Walk through all dimms and find the interesection of the support
- * for ecc sdram and refresh rates
- */
-
-
- for(i = 0; i < DIMM_SOCKETS; i++) {
- if (!(dimm_mask & (1 << i))) {
- continue;
- }
- /* Test to see if I have ecc sdram */
- value = spd_read_byte(ctrl->channel0[i], 11); /* SDRAM type */
- if(value < 0) continue;
- if(value !=2 ) {
-#if DEBUG_RAM_CONFIG
- print_debug("spd_detect_dimms:\r\n");
-#endif
- /* Clear the ecc enable */
- dword &= ~(3 << 20);
-#if 0 &&DEBUG_RAM_CONFIG
- print_debug("spd_detect_dimms: no ecc so set:");
- print_debug_hex32(dword);
- print_debug("\r\n");
-#endif
-
- }
- value = spd_read_byte(ctrl->channel0[i], 12); /* SDRAM refresh rate */
- if(value < 0 ) continue;
- value &= 0x7f;
- if(value > MAX_SPD_REFRESH_RATE) { print_err("unsupported refresh rate\r\n");}
-/* if(value == 0xff) { print_err("unsupported refresh rate\r\n");}*/
-
-#if DEBUG_RAM_CONFIG
- print_debug("spd_detect_dimms: ref rate index:");
- print_debug_hex8(value);
- print_debug("\r\n");
-#endif
- if (value == 2) /* have to go faster */
- refrate = 2;
-#if 0 &&DEBUG_RAM_CONFIG
- print_debug("spd_detect_dimms: dword is now w/refresh:");
- print_debug_hex32(dword);
- print_debug("\r\n");
-#endif
- /* no applicability here but there are similar things
- * we'll try later.
- */
-#if 0
- value = spd_read_byte(ctrl->channel0[i], 33); /* Address and command hold time after clock */
- if(value < 0) continue;
- if(value >= 0xa0) { /* At 133Mhz this constant should be 0x75 */
- dword &= ~(1<<16); /* Use two clock cyles instead of one */
- }
-#endif
-
- /* go to the next DIMM */
- }
-
- /* set the refrate now */
- dword |= (refrate << 7);
- /* Now write the controller mode */
- pci_write_config32(ctrl->d0, 0x70, dword);
-
- return dimm_mask;
-
-}
-static long spd_enable_clocks(const struct mem_controller *ctrl, long dimm_mask)
-{
- int i;
- uint32_t dword;
- int value;
-
- /* Read the inititial state */
- dword = pci_read_config32(ctrl->d0, 0x8c);
-/*
- Intel clears top bit here, should we?
- No the default is on and for normal timming it should be on. Tom Z
- andl $0x7f, %esi
- */
-
- for(i = 0; i < DIMM_SOCKETS; i++) {
- if (!(dimm_mask & (1 << i))) {
- continue;
- }
- /* Read any spd byte to see if the dimm is present */
- value = spd_read_byte(ctrl->channel0[i], 5); /* Physical Banks */
- if(value < 0) continue;
-
- dword &= ~(1<<i);
- }
-
- pci_write_config32(ctrl->d0, 0x8c, dword);
-
- return dimm_mask;
-}
-
-static const uint16_t cas_latency_80[] = {
- /* For cas latency 2.0 0x01 works and until I see a large test sample
- * I am not prepared to change this value, to the intel recommended value
- * of 0x0d. Eric Biederman
- */
- /* The E7501 requires b1 rather than 01 for CAS2 or memory will be hosed
- * CAS 1.5 is claimed to be unsupported, will try to test that
- * will need to determine correct values for other CAS values
- * (perhaps b5, b1, b6?)
- * Steven James 02/06/2003
- */
-
-/*# .byte 0x05, 0x01, 0x06 */
-/*# .byte 0xb5, 0xb1, 0xb6 */
- 0x0, 0x0bb1, 0x0662 /* RCVEN */
-};
-static const uint16_t cas_latency_80_4dimms[] = {
- 0x0, 0x0bb1, 0x0882
-};
-
-
-static const uint8_t cas_latency_78[] = {
- DRT_CAS_2_0, DRT_CAS_2_5
-};
-
-static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mask) {
- /* Walk through all dimms and find the interesection of the
- * supported cas latencies.
- */
- int i;
- /* Initially allow cas latencies 2.5, 2.0
- * which the chipset supports.
- */
- uint32_t dword = (1<<3)| (1<<2);/* esi*/
- uint32_t edi;
- uint32_t ecx;
- unsigned device;
- int value;
- uint8_t byte;
- uint16_t word;
-
-
- for(i = 0; i < DIMM_SOCKETS; i++) {
- if (!(dimm_mask & (1 << i))) {
- continue;
- }
- value = spd_read_byte(ctrl->channel0[i], 18);
- if(value < 0) continue;
- /* Find the highest supported cas latency */
- ecx = log2(value & 0xff);
- edi = (1<< ecx);
-
- /* Remember the supported cas latencies */
- ecx = (value & 0xff);
-
- /* Verify each cas latency at 133Mhz */
- /* Verify slowest/highest CAS latency */
- value = spd_read_byte(ctrl->channel0[i], 9);
- if(value < 0 ) continue;
- if(value > 0x75 ) {
- /* The bus is too fast so we cannot support this case latency */
- ecx &= ~edi;
- }
-
- /* Verify the highest CAS latency - 0.5 clocks */
- edi >>= 1;
- if(edi != 0) {
- value = spd_read_byte(ctrl->channel0[i], 23);
- if(value < 0 ) continue;
- if(value > 0x75) {
- /* The bus is too fast so we cannot support this cas latency */
- ecx &= ~edi;
- }
- }
-
- /* Verify the highest CAS latency - 1.0 clocks */
- edi >>=1;
- if(edi !=0) {
- value = spd_read_byte(ctrl->channel0[i], 25);
- if(value < 0 ) continue;
- if(value > 0x75) {
- /* The bus is too fast so we cannot support this cas latency */
- ecx &= ~edi;
- }
- }
-
- /* Now find which cas latencies are supported for the bus */
- dword &= ecx;
- /* go to the next DIMM */
- }
-
- /* After all of the arduous calculation setup with the fastest
- * cas latency I can use.
- */
- value = __builtin_bsf(dword); /* bsrl = log2 how about bsfl?*/
- if(value ==0 ) return -1;
- ecx = value -1;
-
- byte = pci_read_config8(ctrl->d0, 0x78);
- byte &= ~(DRT_CAS_MASK);
- byte |= cas_latency_78[ecx];
- pci_write_config8(ctrl->d0,0x78, byte);
-
- /* set master DLL reset */
- dword = pci_read_config32(ctrl->d0, 0x88);
- dword |= (1<<26);
-
- /* the rest of the references are words */
-/* ecx<<=1; // don't need shift left, because we already define that in u16 array*/
- pci_write_config32(ctrl->d0, 0x88, dword);
-
-
- dword &= 0x0c0000ff; /* patch try register 88 is undocumented tnz */
- dword |= 0xd2109800;
-
- pci_write_config32(ctrl->d0, 0x88, dword);
-
- word = pci_read_config16(ctrl->d0, 0x80);
- word &= ~(0x0fff);
- word |= cas_latency_80[ecx];
-
- dword = pci_read_config32(ctrl->d0, 0x70);
-
- if((dword & 0xff) !=0 ) {
- dword >>=8;
- if((dword & 0xff)!=0) {
- dword >>=8;
- if((dword & 0xff)!=0) {
- dword >>= 8;
- if( (dword & 0xff)!=0) {
- word &=~(0x0fff); /* we have dimms in all 4 slots */
- word |=cas_latency_80_4dimms[ecx];
- }
- }
- }
- }
-
- pci_write_config16(ctrl->d0, 0x80, word);
-
- dword = pci_read_config32(ctrl->d0, 0x88); /* reset master DLL reset */
- dword &= ~(1<<26);
- pci_write_config32(ctrl->d0, 0x88, dword);
-
- RAM_RESET_DDR_PTR(ctrl);
-
- return dimm_mask;
-
-}
-
-static const unsigned int bustimings[8] = {
- /* first four are for GM part */
- 266, 200, 200, -1,
- /* and then the GME part */
- 266, 200, 200, 333
-};
-
-static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mask) {
- /* Walk through all dimms and find the interesection of the
- * supported dram timings.
- */
-
- int i;
- uint32_t dword;
- int value;
-
- /* well, shit. Intel has not seen fit to document the observed
- * setting for these bits. On my chipset it is 3 right now, and
- * that's not in the table documented for this chip.
- * What a shame. We will assume 133 mhz I guess? not sure.
- * also they say in one place it is two bits and in another
- * they say it is 3 bits! we'll assume two bits, that's
- * the only one that makes sense.
- */
- uint32_t rambusfrequency;
- uint32_t ramindex;
-
- /* what kind of chip is it? */
- /* only bit that really matters is high order bit ... */
- /* here is a problem with the memory controller struct ...
- * ram control is spread across d0/d1 on this part!
- */
- ramindex = pci_read_config8(PCI_DEV(0,0,0), 0x44);
- ramindex >>= 5;
-
- /* compute the index into the table. Use the type of chip
- * as the high order bit and the 0:0.3:c0 & 7 as the low
- * order four bits.
- */
-
- ramindex |= pci_read_config8(PCI_DEV(0,0,3), 0xc0) & 7;
- /* we now have an index into the clock rate table ... */
-
- rambusfrequency = bustimings[ramindex];
-
- /* Read the inititial state */
- dword = pci_read_config32(ctrl->d0, 0x60);
-#if DEBUG_RAM_CONFIG >= 10
- print_debug("spd_detect_dimms: bus timing index: ");
- print_debug_hex32(ramindex);
- print_debug(" and speed ");
- print_debug_hex32(rambusfrequency);
- print_debug("\r\n");
-#endif
-
- /* for now, since we are on deadline, set to "known good" and
- * fix later.
- */
- pci_write_config32(ctrl->d0, 0x60, 0x2a004425);
- return dimm_mask;
-
-/*
- Intel clears top bit here, should we?
- No the default is on and for normal timming it should be on. Tom Z
- andl $0x7f, %esi
- */
-
-
-/* HERE. WHat's the frequency kenneth? */
- for(i = 0; i < DIMM_SOCKETS; i++) {
- if (!(dimm_mask & (1 << i))) {
- continue;
- }
- /* Trp */
- value = spd_read_byte(ctrl->channel0[i], 27);
- if(value < 0) continue;
- if(value > (15<<2)) {
- /* At 133Mhz if row precharge time is above than 15ns than we
- * need 3 clocks not 2 clocks.
- */
- dword &= ~(1<<0);
- }
- /* Trcd */
- value = spd_read_byte(ctrl->channel0[i],29);
- if(value < 0 ) continue;
- if(value > (15<<2)) {
- /* At 133Mhz if the Minimum ras to cas delay is about 15ns we
- * need 3 clocks not 2 clocks.
- */
- dword &= ~((1<<3)|(1<<1));
- }
- /* Tras */
- value = spd_read_byte(ctrl->channel0[i],30);
- if(value < 0 ) continue;
- /* Convert tRAS from ns to 133Mhz clock cycles */
- value <<=1; /* mult by 2 to make 7.5 15 */
- value += 15; /* Make certain we round up */
- value --;
- value &= 0xff; /* Clear the upper bits of eax */
- value /= 15;
-
- /* Don't even process small timings */
- if(value >5) {
- uint32_t tmp;
- /* Die if the value is to large */
- if(value>7) {
- die ("unsupported_rcd\r\n");
- }
- /* Convert to clocks - 5 */
- value -=5;
- /* Convert the existing value into clocks - 5 */
- tmp = (~((dword>>9) & 3) - 1) & 3;
- /* See if we need a slower timing */
- if(value > tmp ) {
- /* O.k. put in our slower timing */
- dword &= ~(3<<9);
- dword |= ((~(value + 1)) & 3)<<9 ;
- }
- }
-
- /* Trd */
- /* Set to a 7 clock read delay. This is for 133Mhz
- * with a CAS latency of 2.5 if 2.0 a 6 clock
- * delay is good */
- if( (pci_read_config8(ctrl->d0, 0x78) & 0x30) ==0 ){
- dword &= ~(7<<24); /* CAS latency is 2.5, make 7 clks */
- }
-
- /*
- * Back to Back Read Turn Around
- */
- /* Set to a 3 clock back to back read turn around. This
- * is good for CAS latencys 2.5 and 2.0 */
- dword |= (1<<27);
- /*
- * Back to Back Read-Write Turn Around
- */
- /* Set to a 5 clock back to back read to write turn around.
- * 4 is a good delay if the CAS latency is 2.0 */
- if( ( pci_read_config8(ctrl->d0, 0x78) & (1<<4)) == 0) {
- dword &= ~(1<<28);
- }
- /*
- * Back to Back Write-Read Turn Around
- */
- /* Set to a 2 clock back to back write to read turn around.
- * This is good for 2.5 and 2.0 CAS Latencies. */
- dword |= (1<<29);
- }
-
- pci_write_config32(ctrl->d0, 0x60, dword);
-
- return dimm_mask;
-
-}
-static unsigned int spd_detect_dimms(const struct mem_controller *ctrl)
-{
- unsigned dimm_mask;
- int i;
- dimm_mask = 0;
-#if DEBUG_RAM_CONFIG
- print_debug("spd_detect_dimms:\r\n");
-#endif
- for(i = 0; i < DIMM_SOCKETS; i++) {
- int byte;
- unsigned device;
-#if DEBUG_RAM_CONFIG
- print_debug_hex32(i);
- print_debug("\r\n");
-#endif
- device = ctrl->channel0[i];
- if (device) {
- byte = spd_read_byte(ctrl->channel0[i], 2); /* Type */
- if (byte == 7) {
- dimm_mask |= (1 << i);
- }
- }
- }
-
- return dimm_mask;
-}
-
-static uint32_t set_dimm_size(const struct mem_controller *ctrl, struct dimm_size sz, uint32_t memsz, unsigned index)
-{
- int i;
- uint32_t base0, base1;
- uint32_t dch;
- uint8_t byte;
-
- /* I think size2 is always 0 ... */
- /* Double the size if we are using dual channel memory */
- if (sz.side1 != sz.side2) {
- sz.side2 = 0;
- }
-
-
- /* Make certain side1 of the dimm is at least 32MB */
- /* This 28 is weird.
- * sz.size1 is log2 size in bits.
- * so what's 28? So think of it as this:
- * in log2 space: 10 + 10 + 8, i.e. 1024 * 1024 * 256 or
- * 256 Mbits, or 32 Mbytes.
- */
- /* this is from the e7500 code and it's just wrong for small dimes (< 64 MB)
- * However, realistically, this case will never happen! the dimms are all bigger ...
- * so skip the conditional completely.
- * if (sz.side1 >= (28)) { }
- */
- memsz += (1 << (sz.side1 - (28)) ) ;
-
- /* Write the size of side 1 of the dimm */
- #if DEBUG_RAM_CONFIG
- print_debug("Write size ");
- print_debug_hex8(memsz);
- print_debug(" to ");
- print_debug_hex8(0x40 + index);
- print_debug("\r\n");
-#endif
- byte = memsz;
- pci_write_config8(ctrl->d0, 0x40+index, byte);
-
- /* now, fill in DRBs where no physical slot exists */
-
- for(i=index+1;i<4;i++) {
- pci_write_config8(ctrl->d0, 0x40+i, byte);
- }
-
- return memsz;
-
-}
-
-#define LAST_DRB_SLOT 0x43
-
-static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask)
-{
- int i;
- uint32_t memsz=0;
- uint16_t word;
-
- for(i = 0; i < DIMM_SOCKETS; i++) {
- struct dimm_size sz;
- if (!(dimm_mask & (1 << i))) {
- continue;
- }
- sz = spd_get_dimm_size(ctrl->channel0[i]);
-#if DEBUG_RAM_CONFIG
- print_debug("dimm size =");
- print_debug_hex32(sz.side1);
- print_debug(" ");
- print_debug_hex32(sz.side2);
- print_debug("\r\n");
-#endif
-
- if (sz.side1 == 0) {
- return -1; /* Report SPD error */
- }
- memsz = set_dimm_size(ctrl, sz, memsz, i);
- }
-#if 0
- /* For now hardset everything at 128MB boundaries */
- /* %ebp has the ram size in multiples of 64MB */
-/* cmpl $0, %ebp /* test if there is no mem - smbus went bad */*/
-/* jz no_memory_bad_smbus*/
- if(memsz < 0x30) {
- /* I should really adjust all of this in C after I have resources
- * to all of the pcie devices.
- */
-
- /* Round up to 128M granularity */
- memsz++;
- memsz &= 0xfe;
- memsz<<= 10;
- word = memsz;
- pci_write_config16(ctrl->d0, 0xc4, word);
- } else {
-
- /* FIXME will this work with 3.5G of ram? */
- /* Put TOLM at 3G */
- pci_write_config16(ctrl->d0, 0xc4, 0xc000);
- /* Hard code a 1G remap window, right after the ram */
- if(memsz< 0x40){
- word = 0x40; /* Ensure we are over 4G */
- } else {
- word = memsz;
- }
- pci_write_config16(ctrl->d0, 0xc6, word);
- word += 0x10;
- pci_write_config16(ctrl->d0, 0xc8, word);
-
- }
-#endif
-
- return dimm_mask;
-}
-
-static void sdram_set_spd_registers(const struct mem_controller *ctrl) {
- long dimm_mask;
-#if DEBUG_RAM_CONFIG
- print_debug(spd_pre_init);
-#endif
- /*activate_spd_rom(ctrl);*/
- dimm_mask = spd_detect_dimms(ctrl);
- if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) {
- print_debug("No memory for this controller\n");
- return;
- }
- dimm_mask = spd_enable_clocks(ctrl, dimm_mask);
- if (dimm_mask < 0)
- goto hw_spd_err;
- /*spd_verify_dimms(ctrl);*/
-#if DEBUG_RAM_CONFIG
- print_debug(spd_pre_set);
-#endif
- dimm_mask = spd_set_row_attributes(ctrl,dimm_mask);
-
- if (dimm_mask < 0)
- goto hw_spd_err;
- dimm_mask = spd_set_dram_controller_mode(ctrl,dimm_mask);
-
- if (dimm_mask < 0)
- goto hw_spd_err;
-
- /* skip for now until we just get "known good" up
- dimm_mask = spd_set_cas_latency(ctrl,dimm_mask);
- */
-
- if (dimm_mask < 0)
- goto hw_spd_err;
- dimm_mask = spd_set_dram_timing(ctrl,dimm_mask);
- if (dimm_mask < 0)
- goto hw_spd_err;
-
-#if DEBUG_RAM_CONFIG
- print_debug(spd_post_init);
-#endif
- /*moved from dram_post_init*/
- spd_set_ram_size(ctrl, dimm_mask);
- dump_pci_device(PCI_DEV(0,0,1));
- return;
-
- hw_spd_err:
- /* Unrecoverable error reading SPD data */
- print_err("SPD error - reset\r\n");
- hard_reset();
- return;
-}
-
-
- /* I have finally seen ram bad enough to cause coreboot
- * to die in mysterious ways, before booting up far
- * enough to run a memory tester. This code attempts
- * to catch this blatantly bad ram, with a spot check.
- * For most cases you should boot all of the way up
- * and run a memory tester.
- */
- /* Ensure I read/write each stick of bank of memory &&
- * that I do more than 1000 bytes to avoid the northbridge cache.
- * Only 64M of each side of each DIMM is currently mapped,
- * so we can handle > 4GB of ram here.
- */
-
-static void ram_postinit(const struct mem_controller *ctrl) {
-#if DEBUG_RAM_CONFIG
- dumpnorth();
-#endif
- /*spd_set_ram_size(ctrl);*/
-}
-#define FIRST_NORMAL_REFERENCE() CALL_LABEL(ram_postinit)
-
-#define SPECIAL_FINISHUP() CALL_LABEL(dram_finish)
-
-
-#define ecc_pre_init "Initializing ECC state...\r\n"
-#define ecc_post_init "ECC state initialized.\r\n"
-static void dram_finish(const struct mem_controller *ctrl)
-{
- uint32_t dword;
- uint8_t byte;
- /* Test to see if ECC support is enabled */
- dword = pci_read_config32(ctrl->d0, 0x70);
- dword >>=20;
- dword &=1;
- if(dword == 1) {
-
-#if DEBUG_RAM_CONFIG
-// print_debug(ecc_pre_init);
-#endif
-#if DEBUG_RAM_CONFIG
-// print_debug(ecc_post_init);
-#endif
-#if 0
- /* Clear the ECC error bits */
- dword = pci_read_config32(ctrl->d0, 0x7c); /* FCS_EN */
- dword |= (1<<17);
- pci_write_config32(ctrl->d0, 0x7c, dword);
-#endif
- }
-
-#if DEBUG_RAM_CONFIG
-// dumpnorth();
-#endif
-
-/* verify_ram(); */
-}
-
-#if ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG
-#define ram_enable_1 "Ram Enable 1\r\n"
-#define ram_enable_2 "Ram Enable 2\r\n"
-#define ram_enable_3 "Ram Enable 3\r\n"
-#define ram_enable_4 "Ram Enable 4\r\n"
-#define ram_enable_5 "Ram Enable 5\r\n"
-#define ram_enable_6 "Ram Enable 6\r\n"
-#define ram_enable_7 "Ram Enable 7\r\n"
-#define ram_enable_8 "Ram Enable 8\r\n"
-#define ram_enable_9 "Ram Enable 9\r\n"
-#define ram_enable_10 "Ram Enable 10\r\n"
-#define ram_enable_11 "Ram Enable 11\r\n"
-#endif
-
- /* Estimate that SLOW_DOWN_IO takes about 50&76us*/
- /* delay for 200us */
-void udelay(int usecs)
-{
- int i;
- for(i = 0; i < usecs; i++)
- outb(i&0xff, 0x80);
-}
-
-
-#if 0
-static void DO_DELAY(void){
- udelay(200);
-}
-#endif
-
-#define DO_DELAY udelay(200);
-/*
- for(i=0; i<16;i++) { SLOW_DOWN_IO }
- */
-
-
-#define EXTRA_DELAY DO_DELAY
-
-static void sdram_enable(int controllers, const struct mem_controller *ctrl)
-{
- int i;
- uint32_t mchtst;
- /* 1 & 2 Power up and start clocks */
- /* let the games begin. More undocumented shit, so we'll just set it
- * as intel sets it
- */
- mchtst = pci_read_config32(ctrl->d0, 0x68);
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_1);
- print_debug_hex32(mchtst);
- dumpnorth();
-#endif
- /*
- mchtst = 0x10f10038;
- pci_write_config32(ctrl->d0, 0x68, mchtst);
- * can't find a ram power register ...
- */
-
-#if DEBUG_RAM_CONFIG
-
- print_debug(ram_enable_2);
-#endif
-
- /* A 200us delay is needed */
-
- DO_DELAY
- EXTRA_DELAY
-
- /* 3. Apply NOP */
-#if DEBUG_RAM_CONFIG
- dump_pci_device(PCI_DEV(0, 0, 0)) ;
- print_debug(ram_enable_3);
-#endif
- RAM_NOP(ctrl);
- EXTRA_DELAY
-#undef DEBUG_RAM_CONFIG
-#define DEBUG_RAM_CONFIG 0
- /* 4 Precharge all */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_4);
-#endif
-#undef DEBUG_RAM_CONFIG
-#define DEBUG_RAM_CONFIG 0
- RAM_PRECHARGE(ctrl);
- EXTRA_DELAY
-
- /* wait until the all banks idle state... */
- /* 5. Issue EMRS to enable DLL */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_5);
-#endif
- RAM_EMRS(ctrl);
- EXTRA_DELAY
-
- /* 6. Reset DLL */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_6);
-#endif
- RAM_MRS(ctrl,1);
- EXTRA_DELAY
-
- /* Ensure a 200us delay between the DLL reset in step 6 and the final
- * mode register set in step 9.
- * Infineon needs this before any other command is sent to the ram.
- */
- DO_DELAY
- EXTRA_DELAY
-
- /* 7 Precharge all */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_7);
-#endif
- RAM_PRECHARGE(ctrl);
- EXTRA_DELAY
-
- /* 8 Now we need 2 AUTO REFRESH / CBR cycles to be performed */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_8);
-#endif
- RAM_CBR(ctrl);
- EXTRA_DELAY
- RAM_CBR(ctrl);
- EXTRA_DELAY
- /* And for good luck 6 more CBRs */
- RAM_CBR(ctrl);
- EXTRA_DELAY
- RAM_CBR(ctrl);
- EXTRA_DELAY
- RAM_CBR(ctrl);
- EXTRA_DELAY
- RAM_CBR(ctrl);
- EXTRA_DELAY
- RAM_CBR(ctrl);
- EXTRA_DELAY
- RAM_CBR(ctrl);
- EXTRA_DELAY
-
- /* 9 mode register set */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_9);
-#endif
- RAM_MRS(ctrl,0);
- EXTRA_DELAY
-
- /* 10 DDR Receive FIFO RE-Sync */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_10);
-#endif
- RAM_RESET_DDR_PTR(ctrl);
- EXTRA_DELAY
-
- /* 11 normal operation */
-#if DEBUG_RAM_CONFIG
- print_debug(ram_enable_11);
-#endif
- RAM_NORMAL(ctrl);
-
-
- /* special from v1*/
- /*FIRST_NORMAL_REFERENCE();*/
- /*spd_set_ram_size(ctrl, 0x03);*/
-
- /* Finally enable refresh */
- ENABLE_REFRESH(ctrl);
-
- /*SPECIAL_FINISHUP();*/
- dram_finish(ctrl);
- { char *c = (char *) 0;
- *c = 'a';
- print_debug("Test: ");
- print_debug_hex8(*c);
- print_debug("\r\n");
- }
-
-
-}
-
diff --git a/src/northbridge/intel/i855pm/raminit.h b/src/northbridge/intel/i855pm/raminit.h
deleted file mode 100644
index 3bdec56cb5..0000000000
--- a/src/northbridge/intel/i855pm/raminit.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef RAMINIT_H
-#define RAMINIT_H
-
-/* I think the 855 is only four sockets -- RGM */
-#define DIMM_SOCKETS 4
-struct mem_controller {
- device_t d0;
- uint16_t channel0[DIMM_SOCKETS];
-};
-
-
-#endif /* RAMINIT_H */
diff --git a/src/northbridge/intel/i855pm/reset_test.c b/src/northbridge/intel/i855pm/reset_test.c
deleted file mode 100644
index 7c933c58e3..0000000000
--- a/src/northbridge/intel/i855pm/reset_test.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/* Convert to C by yhlu */
-/* converted to 855 by RGM */
-#define MCH_DRC 0x70
-#define DRC_DONE (1 << 29)
- /* If I have already booted once skip a bunch of initialization */
- /* To see if I have already booted I check to see if memory
- * has been enabled.
- */
-static int bios_reset_detected(void) {
- uint32_t dword;
-
- dword = pci_read_config32(PCI_DEV(0, 0, 0), MCH_DRC);
-
- if( (dword & DRC_DONE) != 0 ) {
- return 1;
- }
-
- return 0;
-}