summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/gigabyte/m57sli/Config.lb2
-rw-r--r--src/mainboard/gigabyte/m57sli/cache_as_ram_auto.c17
2 files changed, 17 insertions, 2 deletions
diff --git a/src/mainboard/gigabyte/m57sli/Config.lb b/src/mainboard/gigabyte/m57sli/Config.lb
index 8fece774e9..8a29d014e7 100644
--- a/src/mainboard/gigabyte/m57sli/Config.lb
+++ b/src/mainboard/gigabyte/m57sli/Config.lb
@@ -310,7 +310,7 @@ chip northbridge/amd/amdk8/root_complex
# SIO pin set 1 input mode
#irq 0xc8 = 0x0
# SIO pin set 2 mixed input/output mode
- irq 0xc9 = 0x0
+ irq 0xc9 = 0x40
# SIO pin set 4 input mode
#irq 0xcb = 0x0
# Generate SMI# on EC IRQ
diff --git a/src/mainboard/gigabyte/m57sli/cache_as_ram_auto.c b/src/mainboard/gigabyte/m57sli/cache_as_ram_auto.c
index 3a17ef2d2f..30e2e69ace 100644
--- a/src/mainboard/gigabyte/m57sli/cache_as_ram_auto.c
+++ b/src/mainboard/gigabyte/m57sli/cache_as_ram_auto.c
@@ -93,6 +93,7 @@
#include "northbridge/amd/amdk8/setup_resource_map.c"
#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1)
+#define GPIO_DEV PNP_DEV(0x2e, IT8716F_GPIO)
#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
@@ -265,13 +266,27 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset = 0;
unsigned bsp_apicid = 0;
+ uint8_t tmp = 0;
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}
pnp_enter_ext_func_mode(SERIAL_DEV);
- pnp_write_config(SERIAL_DEV, 0x23, 1);
+ /* The following line will set CLKIN to 24 MHz */
+ pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_CLOCKSEL, 1);
+ tmp = pnp_read_config(SERIAL_DEV, IT8716F_CONFIG_REG_SWSUSP);
+ /* Is serial flash enabled? Then enable writing to serial flash. */
+ if (tmp & 0x0e) {
+ pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_SWSUSP, tmp | 0x10);
+ pnp_set_logical_device(GPIO_DEV);
+ /* Set Serial Flash interface to 0x0820 */
+ pnp_write_config(GPIO_DEV, 0x64, 0x08);
+ pnp_write_config(GPIO_DEV, 0x65, 0x20);
+ /* We can get away with not resetting the logical device because
+ * it8716f_enable_dev(SERIAL_DEV, TTYS0_BASE) will do that.
+ */
+ }
it8716f_enable_dev(SERIAL_DEV, TTYS0_BASE);
pnp_exit_ext_func_mode(SERIAL_DEV);