summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c2
-rw-r--r--src/mainboard/iwill/dk8s2/cache_as_ram_auto.c2
-rw-r--r--src/mainboard/iwill/dk8x/cache_as_ram_auto.c2
-rw-r--r--src/northbridge/amd/amdk8/coherent_ht_car.c1838
4 files changed, 3 insertions, 1841 deletions
diff --git a/src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c b/src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c
index 733909f6a5..a5cf536786 100644
--- a/src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c
+++ b/src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c
@@ -108,7 +108,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
}
#include "northbridge/amd/amdk8/amdk8.h"
-#include "northbridge/amd/amdk8/coherent_ht_car.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/incoherent_ht.c"
diff --git a/src/mainboard/iwill/dk8s2/cache_as_ram_auto.c b/src/mainboard/iwill/dk8s2/cache_as_ram_auto.c
index a9d66e1ba7..566ad419b4 100644
--- a/src/mainboard/iwill/dk8s2/cache_as_ram_auto.c
+++ b/src/mainboard/iwill/dk8s2/cache_as_ram_auto.c
@@ -108,7 +108,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
}
#include "northbridge/amd/amdk8/amdk8.h"
-#include "northbridge/amd/amdk8/coherent_ht_car.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/incoherent_ht.c"
diff --git a/src/mainboard/iwill/dk8x/cache_as_ram_auto.c b/src/mainboard/iwill/dk8x/cache_as_ram_auto.c
index a9d66e1ba7..566ad419b4 100644
--- a/src/mainboard/iwill/dk8x/cache_as_ram_auto.c
+++ b/src/mainboard/iwill/dk8x/cache_as_ram_auto.c
@@ -108,7 +108,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
}
#include "northbridge/amd/amdk8/amdk8.h"
-#include "northbridge/amd/amdk8/coherent_ht_car.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/incoherent_ht.c"
diff --git a/src/northbridge/amd/amdk8/coherent_ht_car.c b/src/northbridge/amd/amdk8/coherent_ht_car.c
deleted file mode 100644
index 55a2a77bd3..0000000000
--- a/src/northbridge/amd/amdk8/coherent_ht_car.c
+++ /dev/null
@@ -1,1838 +0,0 @@
-/* coherent hypertransport initialization for AMD64
- *
- * written by Stefan Reinauer <stepan@openbios.org>
- * (c) 2003-2004 by SuSE Linux AG
- *
- * (c) 2004 Tyan Computer
- * 2004.12 yhlu added support to create routing table dynamically.
- * it also support 8 ways too. (8 ways ladder or 8 ways crossbar)
- *
- * This code is licensed under GPL.
- */
-
-/*
- * This algorithm assumes a grid configuration as follows:
- *
- * nodes : 1 2 4 6 8
- * org. : 1x1 2x1 2x2 2x3 2x4
- Ladder:
- CPU7-------------CPU6
- | |
- | |
- | |
- | |
- | |
- | |
- CPU5-------------CPU4
- | |
- | |
- | |
- | |
- | |
- | |
- CPU3-------------CPU2
- | |
- | |
- | |
- | |
- | |
- | |
- CPU1-------------CPU0
- CROSS_BAR_47_56:
- CPU7-------------CPU6
- | \____ ___/ |
- | \ / |
- | \/ |
- | /\ |
- | / \ |
- | ____/ \___ |
- CPU5 CPU4
- | |
- | |
- | |
- | |
- | |
- | |
- CPU3-------------CPU2
- | |
- | |
- | |
- | |
- | |
- | |
- CPU1-------------CPU0
- */
-
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <device/hypertransport_def.h>
-#include "arch/romcc_io.h"
-
-#include "amdk8.h"
-
-#define enable_bsp_routing() enable_routing(0)
-
-#define NODE_HT(x) PCI_DEV(0,24+x,0)
-#define NODE_MP(x) PCI_DEV(0,24+x,1)
-#define NODE_MC(x) PCI_DEV(0,24+x,3)
-
-#define DEFAULT 0x00010101 /* default row entry */
-
-#ifndef CROSS_BAR_47_56
- #define CROSS_BAR_47_56 0
-#endif
-
-#ifndef TRY_HIGH_FIRST
- #define TRY_HIGH_FIRST 0
-#endif
-
-#ifndef K8_HT_FREQ_1G_SUPPORT
- #define K8_HT_FREQ_1G_SUPPORT 0
-#endif
-
-#ifndef K8_HT_CHECK_PENDING_LINK
- #if CONFIG_MAX_PHYSICAL_CPUS >= 4
- #define K8_HT_CHECK_PENDING_LINK 1
- #else
- #define K8_HT_CHECK_PENDING_LINK 0
- #endif
-#endif
-
-#ifndef CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED
- #define CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED 0
-#endif
-
-#ifndef ENABLE_APIC_EXT_ID
- #define ENABLE_APIC_EXT_ID 0
-#endif
-
-
-static inline void print_linkn (const char *strval, uint8_t byteval)
-{
-#if 1
-#if CONFIG_USE_PRINTK_IN_CAR
- printk_debug("%s%02x\r\n", strval, byteval);
-#else
- print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n");
-#endif
-#endif
-}
-
-static void disable_probes(void)
-{
- /* disable read/write/fill probes for uniprocessor setup
- * they don't make sense if only one cpu is available
- */
-
- /* Hypetransport Transaction Control Register
- * F0:0x68
- * [ 0: 0] Disable read byte probe
- * 0 = Probes issues
- * 1 = Probes not issued
- * [ 1: 1] Disable Read Doubleword probe
- * 0 = Probes issued
- * 1 = Probes not issued
- * [ 2: 2] Disable write byte probes
- * 0 = Probes issued
- * 1 = Probes not issued
- * [ 3: 3] Disable Write Doubleword Probes
- * 0 = Probes issued
- * 1 = Probes not issued.
- * [10:10] Disable Fill Probe
- * 0 = Probes issued for cache fills
- * 1 = Probes not issued for cache fills.
- */
-
- u32 val;
-
- print_spew("Disabling read/write/fill probes for UP... ");
-
- val=pci_read_config32(NODE_HT(0), HT_TRANSACTION_CONTROL);
- val |= HTTC_DIS_FILL_P | HTTC_DIS_RMT_MEM_C | HTTC_DIS_P_MEM_C |
- HTTC_DIS_MTS | HTTC_DIS_WR_DW_P | HTTC_DIS_WR_B_P |
- HTTC_DIS_RD_DW_P | HTTC_DIS_RD_B_P;
- pci_write_config32(NODE_HT(0), HT_TRANSACTION_CONTROL, val);
-
- print_spew("done.\r\n");
-
-}
-
-static void enable_apic_ext_id(u8 node)
-{
-#if ENABLE_APIC_EXT_ID==1
-#warning "FIXME Is the right place to enable apic ext id here?"
-
- u32 val;
-
- val = pci_read_config32(NODE_HT(node), 0x68);
- val |= (HTTC_APIC_EXT_SPUR | HTTC_APIC_EXT_ID | HTTC_APIC_EXT_BRD_CST);
- pci_write_config32(NODE_HT(node), 0x68, val);
-#endif
-}
-
-static void enable_routing(u8 node)
-{
- u32 val;
-
- /* HT Initialization Control Register
- * F0:0x6C
- * [ 0: 0] Routing Table Disable
- * 0 = Packets are routed according to routing tables
- * 1 = Packets are routed according to the default link field
- * [ 1: 1] Request Disable (BSP should clear this)
- * 0 = Request packets may be generated
- * 1 = Request packets may not be generated.
- * [ 3: 2] Default Link (Read-only)
- * 00 = LDT0
- * 01 = LDT1
- * 10 = LDT2
- * 11 = CPU on same node
- * [ 4: 4] Cold Reset
- * - Scratch bit cleared by a cold reset
- * [ 5: 5] BIOS Reset Detect
- * - Scratch bit cleared by a cold reset
- * [ 6: 6] INIT Detect
- * - Scratch bit cleared by a warm or cold reset not by an INIT
- *
- */
-
- /* Enable routing table */
- print_spew("Enabling routing table for node ");
- print_spew_hex8(node);
-
- val=pci_read_config32(NODE_HT(node), 0x6c);
- val &= ~((1<<1)|(1<<0));
- pci_write_config32(NODE_HT(node), 0x6c, val);
-
- print_spew(" done.\r\n");
-}
-
-static void fill_row(u8 node, u8 row, u32 value)
-{
- pci_write_config32(NODE_HT(node), 0x40+(row<<2), value);
-}
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
-static u8 link_to_register(int ldt)
-{
- /*
- * [ 0: 3] Request Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- */
-
- if (ldt&0x08) return 0x40;
- if (ldt&0x04) return 0x20;
- if (ldt&0x02) return 0x00;
-
- /* we should never get here */
- print_spew("Unknown Link\n");
- return 0;
-}
-
-static u32 get_row(u8 node, u8 row)
-{
- return pci_read_config32(NODE_HT(node), 0x40+(row<<2));
-}
-
-static int link_connection(u8 src, u8 dest)
-{
- return get_row(src, dest) & 0x0f;
-}
-
-static void rename_temp_node(u8 node)
-{
- uint32_t val;
-
- print_spew("Renaming current temporary node to ");
- print_spew_hex8(node);
-
- val=pci_read_config32(NODE_HT(7), 0x60);
- val &= (~7); /* clear low bits. */
- val |= node; /* new node */
- pci_write_config32(NODE_HT(7), 0x60, val);
-
- print_spew(" done.\r\n");
-}
-
-static int verify_connection(u8 dest)
-{
- /* See if we have a valid connection to dest */
- u32 val;
-
- /* Verify that the coherent hypertransport link is
- * established and actually working by reading the
- * remode node's vendor/device id
- */
- val = pci_read_config32(NODE_HT(dest),0);
- if(val != 0x11001022)
- return 0;
-
- return 1;
-}
-
-static uint16_t read_freq_cap(device_t dev, uint8_t pos)
-{
- /* Handle bugs in valid hypertransport frequency reporting */
- uint16_t freq_cap;
- uint32_t id;
-
- freq_cap = pci_read_config16(dev, pos);
- freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */
-
-#if K8_HT_FREQ_1G_SUPPORT == 1
- #if K8_REV_F_SUPPORT == 0
- if (!is_cpu_pre_e0())
- #endif
- {
- return freq_cap;
- }
-#endif
-
- id = pci_read_config32(dev, 0);
-
- /* AMD K8 Unsupported 1Ghz? */
- if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) {
- freq_cap &= ~(1 << HT_FREQ_1000Mhz);
- }
-
- return freq_cap;
-}
-
-static int optimize_connection(device_t node1, uint8_t link1, device_t node2, uint8_t link2)
-{
- static const uint8_t link_width_to_pow2[]= { 3, 4, 0, 5, 1, 2, 0, 0 };
- static const uint8_t pow2_to_link_width[] = { 0x7, 4, 5, 0, 1, 3 };
- uint16_t freq_cap1, freq_cap2;
- uint8_t width_cap1, width_cap2, width, old_width, ln_width1, ln_width2;
- uint8_t freq, old_freq;
- int needs_reset;
- /* Set link width and frequency */
-
- /* Initially assume everything is already optimized and I don't need a reset */
- needs_reset = 0;
-
- /* Get the frequency capabilities */
- freq_cap1 = read_freq_cap(node1, link1 + PCI_HT_CAP_HOST_FREQ_CAP);
- freq_cap2 = read_freq_cap(node2, link2 + PCI_HT_CAP_HOST_FREQ_CAP);
-
- /* Calculate the highest possible frequency */
- freq = log2(freq_cap1 & freq_cap2);
-
- /* See if I am changing the link freqency */
- old_freq = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_FREQ);
- old_freq &= 0x0f;
- needs_reset |= old_freq != freq;
- old_freq = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_FREQ);
- old_freq &= 0x0f;
- needs_reset |= old_freq != freq;
-
- /* Set the Calulcated link frequency */
- pci_write_config8(node1, link1 + PCI_HT_CAP_HOST_FREQ, freq);
- pci_write_config8(node2, link2 + PCI_HT_CAP_HOST_FREQ, freq);
-
- /* Get the width capabilities */
- width_cap1 = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH);
- width_cap2 = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH);
-
- /* Calculate node1's input width */
- ln_width1 = link_width_to_pow2[width_cap1 & 7];
- ln_width2 = link_width_to_pow2[(width_cap2 >> 4) & 7];
- if (ln_width1 > ln_width2) {
- ln_width1 = ln_width2;
- }
- width = pow2_to_link_width[ln_width1];
- /* Calculate node1's output width */
- ln_width1 = link_width_to_pow2[(width_cap1 >> 4) & 7];
- ln_width2 = link_width_to_pow2[width_cap2 & 7];
- if (ln_width1 > ln_width2) {
- ln_width1 = ln_width2;
- }
- width |= pow2_to_link_width[ln_width1] << 4;
-
- /* See if I am changing node1's width */
- old_width = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH + 1);
- old_width &= 0x77;
- needs_reset |= old_width != width;
-
- /* Set node1's widths */
- pci_write_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH + 1, width);
-
- // * Calculate node2's width */
- width = ((width & 0x70) >> 4) | ((width & 0x7) << 4);
-
- /* See if I am changing node2's width */
- old_width = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH + 1);
- old_width &= 0x77;
- needs_reset |= old_width != width;
-
- /* Set node2's widths */
- pci_write_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH + 1, width);
-
- return needs_reset;
-}
-
-static uint8_t get_linkn_first(uint8_t byte)
-{
- if(byte & 0x02) { byte = 0; }
- else if(byte & 0x04) { byte = 1; }
- else if(byte & 0x08) { byte = 2; }
- return byte;
-}
-
-static uint8_t get_linkn_last(uint8_t byte)
-{
- if(byte & 0x02) { byte &= 0x0f; byte |= 0x00; }
- if(byte & 0x04) { byte &= 0x0f; byte |= 0x10; }
- if(byte & 0x08) { byte &= 0x0f; byte |= 0x20; }
- return byte>>4;
-}
-
-static uint8_t get_linkn_last_count(uint8_t byte)
-{
- byte &= 0x0f;
- if(byte & 0x02) { byte &= 0xcf; byte |= 0x00; byte+=0x40; }
- if(byte & 0x04) { byte &= 0xcf; byte |= 0x10; byte+=0x40; }
- if(byte & 0x08) { byte &= 0xcf; byte |= 0x20; byte+=0x40; }
- return byte>>4;
-}
-
-static void setup_row_local(u8 source, u8 row) /* source will be 7 when it is for temp use*/
-{
- uint8_t linkn;
- uint32_t val;
- val = 1;
- for(linkn = 0; linkn<3; linkn++) {
- uint8_t regpos;
- uint32_t reg;
- regpos = 0x98 + 0x20 * linkn;
- reg = pci_read_config32(NODE_HT(source), regpos);
- if ((reg & 0x17) != 3) continue; /* it is not conherent or not connected*/
- val |= 1<<(linkn+1);
- }
- val <<= 16;
- val |= 0x0101;
- fill_row(source,row, val);
-}
-
-static void setup_row_direct_x(u8 temp, u8 source, u8 dest, u8 linkn)
-{
- uint32_t val;
- uint32_t val_s;
- val = 1<<(linkn+1);
- val |= 1<<(linkn+1+8); /*for direct connect response route should equal to request table*/
-
- if(((source &1)!=(dest &1))
-#if CROSS_BAR_47_56
- && ( (source<4)||(source>5) ) //(6,7) (7,6) should still be here
- //(6,5) (7,4) should be here
-#endif
- ){
- val |= (1<<16);
- } else {
- /*for CROSS_BAR_47_56 47, 56, should be here too
- and for 47, 56, 57, 75, 46, 64 we need to substract another link to
- 6, 7, 6, 6, 7, 7
- */
- val_s = get_row(temp, source);
- val |= ((val_s>>16) - (1<<(linkn+1)))<<16;
- }
-
- fill_row(temp,dest, val );
-}
-
-#if CROSS_BAR_47_56
-static void opt_broadcast_rt(u8 source, u8 dest, u8 kickout) {
- uint32_t val;
- val = get_row(source, dest);
- val -= link_connection(source, kickout)<<16;
- fill_row(source, dest, val);
-}
-
-static void opt_broadcast_rt_group(const u8 *conn, int num) {
- int i;
-
- for(i=0; i<num; i+=3) {
- opt_broadcast_rt(conn[i], conn[i+1],conn[i+2]);
- }
-}
-static void opt_broadcast_rt_plus(u8 source, u8 dest, u8 kickout) {
- uint32_t val;
- val = get_row(source, dest);
- val += link_connection(source, kickout)<<16;
- fill_row(source, dest, val);
-}
-
-static void opt_broadcast_rt_plus_group(const u8 *conn, int num) {
- int i;
-
- for(i=0; i<num; i+=3) {
- opt_broadcast_rt_plus(conn[i], conn[i+1],conn[i+2]);
- }
-}
-#endif
-
-static void setup_row_direct(u8 source, u8 dest, u8 linkn){
- setup_row_direct_x(source, source, dest, linkn);
-}
-
-static void setup_remote_row_direct(u8 source, u8 dest, u8 linkn){
- setup_row_direct_x(7, source, dest, linkn);
-}
-
-static void setup_temp_row(u8 source, u8 dest)
-{
- /* copy val from (source, dest) to (source,7) */
- fill_row(source,7,get_row(source,dest));
-}
-
-static void clear_temp_row(u8 source)
-{
- fill_row(source, 7, DEFAULT);
-}
-
-static void setup_remote_node(u8 node)
-{
- static const uint8_t pci_reg[] = {
- 0x44, 0x4c, 0x54, 0x5c, 0x64, 0x6c, 0x74, 0x7c,
- 0x40, 0x48, 0x50, 0x58, 0x60, 0x68, 0x70, 0x78,
- 0x84, 0x8c, 0x94, 0x9c, 0xa4, 0xac, 0xb4, 0xbc,
- 0x80, 0x88, 0x90, 0x98, 0xa0, 0xa8, 0xb0, 0xb8,
- 0xc4, 0xcc, 0xd4, 0xdc,
- 0xc0, 0xc8, 0xd0, 0xd8,
- 0xe0, 0xe4, 0xe8, 0xec,
- };
- int i;
-
- print_spew("setup_remote_node: ");
-
- /* copy the default resource map from node 0 */
- for(i = 0; i < sizeof(pci_reg)/sizeof(pci_reg[0]); i++) {
- uint32_t value;
- uint8_t reg;
- reg = pci_reg[i];
- value = pci_read_config32(NODE_MP(0), reg);
- pci_write_config32(NODE_MP(7), reg, value);
-
- }
- print_spew("done\r\n");
-}
-
-#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1*/
-
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 2
-#if !CROSS_BAR_47_56
-static void setup_row_indirect_x(u8 temp, u8 source, u8 dest)
-#else
-static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway, u8 diff)
-#endif
-{
- /*for indirect connection, we need to compute the val from val_s(source, source), and val_g(source, gateway) */
- uint32_t val_s;
- uint32_t val;
-#if !CROSS_BAR_47_56
- u8 gateway;
- u8 diff;
- if(source<dest) {
- gateway = source + 2;
- } else {
- gateway = source - 2;
- }
-#endif
- val_s = get_row(temp, source);
- val = get_row(temp, gateway);
-
- val &= 0xffff;
- val_s >>= 16;
- val_s &= 0xfe;
-
-#if !CROSS_BAR_47_56
- diff = ((source&1)!=(dest &1));
-#endif
-
- if(diff && (val_s!=(val&0xff)) ) { /* use another connect as response*/
- val_s -= val & 0xff;
-#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
- uint8_t byte;
- /* Some node have two links left
- * don't worry we only have (2, (3 as source need to handle
- */
- byte = val_s;
- byte = get_linkn_last_count(byte);
- if((byte>>2)>1) { /* make sure not the corner*/
- if(source<dest) {
- val_s-=link_connection(temp, source-2); /* -down*/
- } else {
-#if CROSS_BAR_47_56
- #if 0
- if(source==7) {
- val_s-=link_connection(temp, 6); // for 7,2 via 5
- } else if (source==6){
- val_s-=link_connection(temp, 7); // for 6,3 via 4
- } else
- #endif
- if (source < gateway) { // for 5, 4 via 7
- val_s-=link_connection(temp, source-2);
- } else
-#endif
- val_s-=link_connection(temp, source+2); /* -up*/
- }
- }
-#endif
- val &= 0xff;
- val |= (val_s<<8);
- }
-
- if(diff) { /* cross rung?*/
- val |= (1<<16);
- }
- else {
- val_s = get_row(temp, source);
- val |= ((val_s>>16) - link_connection(temp, gateway))<<16;
- }
-
- fill_row(temp, dest, val);
-
-}
-
-#if !CROSS_BAR_47_56
-static void setup_row_indirect(u8 source, u8 dest)
-{
- setup_row_indirect_x(source, source, dest);
-}
-#else
-static void setup_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff)
-{
- setup_row_indirect_x(source, source, dest, gateway, diff);
-}
-#endif
-
-static void setup_row_indirect_group(const u8 *conn, int num)
-{
- int i;
-
-#if !CROSS_BAR_47_56
- for(i=0; i<num; i+=2) {
- setup_row_indirect(conn[i], conn[i+1]);
-#else
- for(i=0; i<num; i+=4) {
- setup_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]);
-#endif
-
- }
-}
-
-#if !CROSS_BAR_47_56
-static void setup_remote_row_indirect(u8 source, u8 dest)
-{
- setup_row_indirect_x(7, source, dest);
-}
-#else
-static void setup_remote_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff)
-{
- setup_row_indirect_x(7, source, dest, gateway, diff);
-}
-#endif
-
-static void setup_remote_row_indirect_group(const u8 *conn, int num)
-{
- int i;
-
-#if !CROSS_BAR_47_56
- for(i=0; i<num; i+=2) {
- setup_remote_row_indirect(conn[i], conn[i+1]);
-#else
- for(i=0; i<num; i+=4) {
- setup_remote_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]);
-#endif
- }
-}
-
-#endif /*CONFIG_MAX_PHYSICAL_CPUS > 2*/
-
-
-static void setup_uniprocessor(void)
-{
- print_spew("Enabling UP settings\r\n");
-#if CONFIG_LOGICAL_CPUS==1
- unsigned tmp = (pci_read_config32(NODE_MC(0), 0xe8) >> 12) & 3;
- if (tmp>0) return;
-#endif
- disable_probes();
-}
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 2
-static int optimize_connection_group(const u8 *opt_conn, int num) {
- int needs_reset = 0;
- int i;
- for(i=0; i<num; i+=2) {
- needs_reset = optimize_connection(
- NODE_HT(opt_conn[i]), 0x80 + link_to_register(link_connection(opt_conn[i],opt_conn[i+1])),
- NODE_HT(opt_conn[i+1]), 0x80 + link_to_register(link_connection(opt_conn[i+1],opt_conn[i])) );
- }
- return needs_reset;
-}
-#endif
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
-static unsigned setup_smp2(void)
-{
- unsigned nodes;
- u8 byte;
- uint32_t val;
- nodes = 2;
-
- setup_row_local(0, 0); /* it will update the broadcast RT*/
-
- val = get_row(0,0);
- byte = (val>>16) & 0xfe;
- if(byte<0x2) { /* no coherent connection so get out.*/
- nodes = 1;
- return nodes;
- }
-
- /* Setup and check a temporary connection to node 1 */
-#if TRY_HIGH_FIRST == 1
- byte = get_linkn_last(byte); /* Max Link to node1 */
-#else
- byte = get_linkn_first(byte); /*Min Link to node1 --- according to AMD*/
-#endif
- print_linkn("(0,1) link=", byte);
- setup_row_direct(0,1, byte);
- setup_temp_row(0, 1);
-
- verify_connection(7);
-
- /* We found 2 nodes so far */
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /*get default link on node7 to node0*/
- print_linkn("(1,0) link=", byte);
- setup_row_local(7,1);
- setup_remote_row_direct(1, 0, byte);
-
-#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
- val = get_row(7,1);
- byte = (val>>16) & 0xfe;
- byte = get_linkn_last_count(byte);
- if((byte>>2)==3) { /* Oh! we need to treat it as node2. So use another link*/
- val = get_row(0,0);
- byte = (val>>16) & 0xfe;
-#if TRY_HIGH_FIRST == 1
- byte = get_linkn_first(byte); /* Min link to Node1 */
-#else
- byte = get_linkn_last(byte); /* Max link to Node1*/
-#endif
- print_linkn("\t-->(0,1) link=", byte);
- setup_row_direct(0,1, byte);
- setup_temp_row(0, 1);
-
- verify_connection(7);
-
- /* We found 2 nodes so far */
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on node7 to node0*/
- print_linkn("\t-->(1,0) link=", byte);
- setup_row_local(7,1);
- setup_remote_row_direct(1, 0, byte);
- }
-#endif
-
- setup_remote_node(1); /* Setup the regs on the remote node */
- rename_temp_node(1); /* Rename Node 7 to Node 1 */
- enable_routing(1); /* Enable routing on Node 1 */
-#if 0
- /*don't need and it is done by clear_dead_links */
- clear_temp_row(0);
-#endif
-
- return nodes;
-}
-#endif /*CONFIG_MAX_PHYSICAL_CPUS > 1 */
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 2
-
-static unsigned setup_smp4(void)
-{
- unsigned nodes;
- u8 byte;
- uint32_t val;
-
- nodes=4;
-
- /* Setup and check temporary connection from Node 0 to Node 2 */
- val = get_row(0,0);
- byte = ((val>>16) & 0xfe) - link_connection(0,1);
- byte = get_linkn_last_count(byte);
-
- if((byte>>2)==0) { /* We should have two coherent for 4p and above*/
- nodes = 2;
- return nodes;
- }
-
- byte &= 3; /* bit [3,2] is count-1*/
- print_linkn("(0,2) link=", byte);
- setup_row_direct(0, 2, byte); /*(0,2) direct link done*/
-
- /* We found 3 nodes so far. Now setup a temporary
- * connection from node 0 to node 3 via node 1
- */
- setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
- /* here should setup_row_direct(1,3) at first, before that we should find the link in node 1 to 3*/
- val = get_row(1,1);
- byte = ((val>>16) & 0xfe) - link_connection(1,0);
- byte = get_linkn_first(byte);
- print_linkn("(1,3) link=", byte);
- setup_row_direct(1,3,byte); /* (1, 3) direct link done*/
-
- /* We found 4 nodes so far. Now setup all nodes for 4p */
- // We need to make sure 0,2 and 1,3 link is set already
-#if !CROSS_BAR_47_56
- static const u8 conn4_1[] = {
- 0,3,
- 1,2,
- };
-#else
- static const u8 conn4_1[] = {
- 0,3,2,1,
- 1,2,3,1,
- };
-#endif
-
- setup_row_indirect_group(conn4_1, sizeof(conn4_1)/sizeof(conn4_1[0]));
-
- setup_temp_row(0,2);
- verify_connection(7);
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on 7 to 0*/
- print_linkn("(2,0) link=", byte);
-
- setup_row_local(7,2);
- setup_remote_row_direct(2, 0, byte); /* node 2 to node 0 direct link done */
- setup_remote_node(2); /* Setup the regs on the remote node */
-
- rename_temp_node(2); /* Rename Node 7 to Node 2 */
- enable_routing(2); /* Enable routing on Node 2 */
-
- setup_temp_row(0,1);
- setup_temp_row(1,3);
- verify_connection(7);
-
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on 7 to 1*/
- print_linkn("(3,1) link=", byte);
-
- setup_row_local(7,3);
- setup_remote_row_direct(3, 1, byte); /* node 3 to node 1 direct link done */
- setup_remote_node(3); /* Setup the regs on the remote node */
-
- /* We need to init link between 2, and 3 direct link */
- val = get_row(2,2);
- byte = ((val>>16) & 0xfe) - link_connection(2,0);
- byte = get_linkn_last_count(byte);
- print_linkn("(2,3) link=", byte & 3);
-
- setup_row_direct(2,3, byte & 0x3);
- setup_temp_row(0,2);
- setup_temp_row(2,3);
- verify_connection(7); /* to 3*/
-
-#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
- /* We need to find out which link is to node3 */
- if((byte>>2)==2) { /* one to node3, one to node0, one to node4*/
- val = get_row(7,3);
- if((val>>16) == 1) { /* that link is to node4, because via node1 it has been set, recompute it*/
- val = get_row(2,2);
- byte = ((val>>16) & 0xfe) - link_connection(2,0);
- byte = get_linkn_first(byte);
- print_linkn("\t-->(2,3) link=", byte);
- setup_row_direct(2,3,byte);
- setup_temp_row(2,3);
- verify_connection(7); /* to 3*/
- }
- }
-#endif
-
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on 7 to 2*/
- print_linkn("(3,2) link=", byte);
- setup_remote_row_direct(3,2, byte);
-
-#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
- /* set link from 3 to 5 before enable it*/
- val = get_row(7,3);
- byte = ((val>>16) & 0xfe) - link_connection(7,2) - link_connection(7,1);
- byte = get_linkn_last_count(byte);
- if((byte>>2)==1) { /* We should have three coherent links on node 3 for 6p and above*/
- byte &= 3; /*bit [3,2] is count-2*/
- print_linkn("(3,5) link=", byte);
- setup_remote_row_direct(3, 5, byte);
- }
-
- val = get_row(2,2);
- byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0);
- byte = get_linkn_last_count(byte);
-
- if((byte>>2)==1) { /* We should have three coherent link on node 2 for 6p and above*/
- byte &= 3; /* bit [3,2] is count-2*/
- print_linkn("(2,4) link=", byte);
- setup_row_direct(2, 4, byte);
- }
-#endif
-
- //Beside 3, 1 is set, We need to make sure 3, 5 is set already in case has three link in 3
-#if !CROSS_BAR_47_56
- static const u8 conn4_3[] = {
- 3,0,
- };
-#else
- static const u8 conn4_3[] = {
- 3,0,1,1,
- };
-#endif
- setup_remote_row_indirect_group(conn4_3, sizeof(conn4_3)/sizeof(conn4_3[0]));
-
-/* ready to enable RT for Node 3 */
- rename_temp_node(3);
- enable_routing(3); /* enable routing on node 3 (temp.) */
-
- // beside 2, 0 is set, We need to make sure 2, 4 link is set already in case has three link in 2
-#if !CROSS_BAR_47_56
- static const u8 conn4_2[] = {
- 2,1,
- };
-#else
- static const u8 conn4_2[] = {
- 2,1,0,1,
- };
-#endif
- setup_row_indirect_group(conn4_2, sizeof(conn4_2)/sizeof(conn4_2[0]));
-
-#if 0
- /*We need to do sth to reverse work for setup_temp_row (0,1) (1,3) */
- /* it will be done by clear_dead_links */
- clear_temp_row(0);
- clear_temp_row(1);
-#endif
-
- return nodes;
-
-}
-
-#endif /* CONFIG_MAX_PHYSICAL_CPUS > 2 */
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 4
-
-static unsigned setup_smp6(void)
-{
- unsigned nodes;
- u8 byte;
- uint32_t val;
-
- nodes=6;
-
- /* Setup and check temporary connection from Node 0 to Node 4 through 2*/
- val = get_row(2,2);
- byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0);
- byte = get_linkn_last_count(byte);
-
- if((byte>>2)==0) { /* We should have three coherent link on node 2 for 6p and above*/
- nodes = 4;
- return nodes;
- }
-
- /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3*/
- /* set link from 3 to 5 before enable it*/
- val = get_row(3,3);
- byte = ((val>>16) & 0xfe) - link_connection(3,2) - link_connection(3,1);
- byte = get_linkn_last_count(byte);
- if((byte>>2)==0) { /* We should have three coherent links on node 3 for 6p and above*/
- nodes = 4;
- return nodes;
- }
-
- /* We found 6 nodes so far. Now setup all nodes for 6p */
-#warning "FIXME we need to find out the correct gateway for 6p"
- static const u8 conn6_1[] = {
-#if !CROSS_BAR_47_56
- 0, 4,
- 0, 5,
- 1, 4,
- 1, 5,
- 2, 5,
- 3, 4,
-#else
- 0, 4, 2, 0,
- 0, 5, 2, 1,
- 1, 4, 3, 1,
- 1, 5, 3, 0,
- 2, 5, 3, 0,
- 3, 4, 2, 0,
-#endif
- };
-
- setup_row_indirect_group(conn6_1, sizeof(conn6_1)/sizeof(conn6_1[0]));
-
- for(byte=0; byte<4; byte+=2) {
- setup_temp_row(byte,byte+2);
- }
- verify_connection(7);
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /*get default link on 7 to 2*/
- print_linkn("(4,2) link=", byte);
-
- setup_row_local(7,4);
- setup_remote_row_direct(4, 2, byte);
- setup_remote_node(4); /* Setup the regs on the remote node */
-
- /* Set indirect connection to 0, to 3 */
- //we only need to set 4,0 here
- static const u8 conn6_2[] = {
-#if !CROSS_BAR_47_56
- 4, 0,
-#else
- 4, 0, 2, 0,
-#endif
- };
-
- setup_remote_row_indirect_group(conn6_2, sizeof(conn6_2)/sizeof(conn6_2[0]));
-
- rename_temp_node(4);
- enable_routing(4);
-
- setup_temp_row(0,1);
- for(byte=0; byte<4; byte+=2) {
- setup_temp_row(byte+1,byte+3);
- }
- verify_connection(7);
-
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on 7 to 3*/
- print_linkn("(5,3) link=", byte);
- setup_row_local(7,5);
- setup_remote_row_direct(5, 3, byte);
- setup_remote_node(5); /* Setup the regs on the remote node */
-
-#if !CROSS_BAR_47_56
- /* We need to init link between 4, and 5 direct link */
- val = get_row(4,4);
- byte = ((val>>16) & 0xfe) - link_connection(4,2);
- byte = get_linkn_last_count(byte);
- print_linkn("(4,5) link=", byte & 3);
-
- setup_row_direct(4,5, byte & 0x3);
- setup_temp_row(0,2);
- setup_temp_row(2,4);
- setup_temp_row(4,5);
- verify_connection(7); /* to 5*/
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 6
- /* We need to find out which link is to node5 */
-
- if((byte>>2)==2) { /* one to node5, one to node2, one to node6*/
- val = get_row(7,5);
- if((val>>16) == 1) { /* that link is to node6, because via node 3 node 5 has been set*/
- val = get_row(4,4);
- byte = ((val>>16) & 0xfe) - link_connection(4,2);
- byte = get_linkn_first(byte);
- print_linkn("\t-->(4,5) link=", byte);
- setup_row_direct(4,5,byte);
- setup_temp_row(4,5);
- verify_connection(7); /* to 5*/
- }
- }
-#endif
-
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
- print_linkn("(5,4) link=", byte);
- setup_remote_row_direct(5,4, byte);
-
- //init 5, 7 here
- val = get_row(7,5);
- byte = ((val>>16) & 0xfe) - link_connection(7,4) - link_connection(7,3);
- byte = get_linkn_last_count(byte);
- if((byte>>2)==1) { /* We should have three coherent links on node 5 for 6p and above*/
- byte &= 3; /*bit [3,2] is count-2*/
- print_linkn("(5,7) link=", byte);
- setup_remote_row_direct(5, 7, byte);
- }
-
- //init 4,6 here
- val = get_row(4,4);
- byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2);
- byte = get_linkn_last_count(byte);
-
- if((byte>>2)==1) { /* We should have three coherent link on node 4 for 6p and above*/
- byte &= 3; /* bit [3,2] is count-2*/
- print_linkn("(4,6) link=", byte);
- setup_row_direct(4, 6, byte);
- }
-
-#endif
-
- //We need to set 5,0 here only, We need to set up 5, 7 to make 5,0
- /* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */
- static const u8 conn6_3[] = {
-#if !CROSS_BAR_47_56
- 5, 0,
-#else
- 5, 0, 3, 0,
-#endif
- };
-
- setup_remote_row_indirect_group(conn6_3, sizeof(conn6_3)/sizeof(conn6_3[0]));
-
-/* ready to enable RT for 5 */
- rename_temp_node(5);
- enable_routing(5); /* enable routing on node 5 (temp.) */
-
- static const u8 conn6_4[] = {
-#if !CROSS_BAR_47_56
- 4, 1,
- 4, 3,
-
- 5, 2,
- 5, 1,
-
-#else
- 4, 1, 2, 0,
- 4, 3, 2, 0,
- 4, 5, 2, 0,
-
- 5, 2, 3, 0,
- 5, 1, 3, 0,
- 5, 4, 3, 0,
-
-#endif
- };
-
- setup_row_indirect_group(conn6_4, sizeof(conn6_4)/sizeof(conn6_4[0]));
-
-#if 0
- /* We need to do sth about reverse about setup_temp_row (0,1), (2,4), (1, 3), (3,5)
- * It will be done by clear_dead_links
- */
- for(byte=0; byte<4; byte++) {
- clear_temp_row(byte);
- }
-#endif
-
- return nodes;
-
-}
-
-#endif /* CONFIG_MAX_PHYSICAL_CPUS > 4 */
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 6
-
-static unsigned setup_smp8(void)
-{
- unsigned nodes;
- u8 byte;
- uint32_t val;
-
- nodes=8;
-
- /* Setup and check temporary connection from Node 0 to Node 6 via 2 and 4 to 7 */
- val = get_row(4,4);
-#if CROSS_BAR_47_56
- byte = ((val>>16) & 0xfe) - link_connection(4,2);
-#else
- byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2);
- byte = get_linkn_last_count(byte); /* Max link to 6*/
- if((byte>>2)==0) { /* We should have two or three coherent links on node 4 for 8p*/
- nodes = 6;
- return nodes;
- }
-#endif
-
-#if CROSS_BAR_47_56
- byte = get_linkn_last_count(byte); /* Max link to 6*/
- if((byte>>2)<2) { /* We should have two or three coherent links on node 4 for 8p*/
- nodes = 6;
- return nodes;
- }
-#if TRY_HIGH_FIRST == 1
- byte = ((val>>16) & 0xfe) - link_connection(4,2);
- byte = get_linkn_first(byte); /*Min link to 6*/
-#else
- byte &= 3; /* bit [3,2] is count-1 or 2*/
-#endif
- print_linkn("(4,6) link=", byte);
- setup_row_direct(4, 6, byte);
-#endif
-
-#if !CROSS_BAR_47_56
- /* Setup and check temporary connection from Node 0 to Node 7 through 1, 3, 5*/
- val = get_row(5,5);
- byte = ((val>>16) & 0xfe) - link_connection(5,4) - link_connection(5,3);
- byte = get_linkn_last_count(byte);
- if((byte>>2)==0) { /* We should have three coherent links on node 5 for 6p and above*/
- nodes = 6;
- return nodes;
- }
-#endif
-
- /* We found 8 nodes so far. Now setup all nodes for 8p */
- static const u8 conn8_1[] = {
-#if !CROSS_BAR_47_56
- 0, 6,
- /*0, 7,*/
- 1, 6,
- /*1, 7,*/
- 2, 6,
- /*2, 7,*/
- 3, 6,
- /*3, 7,*/
- /*4, 7,*/
- 5, 6,
-#else
- 0, 6, 2, 0,
- /*0, 7, 2, 0,*/
- 1, 6, 3, 0,
- /*1, 7, 3, 0,*/
- 2, 6, 4, 0,
- /*2, 7, 4, 0,*/
- 3, 6, 5, 1,
- /*3, 7, 5, 0,*/
-#endif
- };
-
- setup_row_indirect_group(conn8_1,sizeof(conn8_1)/sizeof(conn8_1[0]));
-
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte,byte+2);
- }
- verify_connection(7);
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
- print_linkn("(6,4) link=", byte);
-
- setup_row_local(7,6);
- setup_remote_row_direct(6, 4, byte);
- setup_remote_node(6); /* Setup the regs on the remote node */
- /* Set indirect connection to 0, to 3 */
-#warning "FIXME we need to find out the correct gateway for 8p"
- static const u8 conn8_2[] = {
-#if !CROSS_BAR_47_56
- 6, 0,
-#else
- 6, 0, 4, 0,
-#endif
- };
-
- setup_remote_row_indirect_group(conn8_2, sizeof(conn8_2)/sizeof(conn8_2[0]));
-
-#if CROSS_BAR_47_56
- //init 5, 6 here
- /* here init 5, 6 */
- /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/
- val = get_row(5,5);
- byte = ((val>>16) & 0xfe) - link_connection(5,3);
-#if TRY_HIGH_FIRST == 1
- byte = get_linkn_first(byte);
-#else
- byte = get_linkn_last(byte);
-#endif
- print_linkn("(5,6) link=", byte);
- setup_row_direct(5, 6, byte);
-
- setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
- for(byte=0; byte<4; byte+=2) {
- setup_temp_row(byte+1,byte+3);
- }
- setup_temp_row(5,6);
-
- verify_connection(7);
-
- val = get_row(7,6); // to chect it if it is node6 before renaming
- if( (val>>16) == 1) { // it is real node 7 so swap it
- /* We need to recompute link to 6 */
- val = get_row(5,5);
- byte = ((val>>16) & 0xfe) - link_connection(5,3);
-#if TRY_HIGH_FIRST == 1
- byte = get_linkn_first(byte);
-#else
- byte = get_linkn_last(byte);
-#endif
- print_linkn("\t-->(5,6) link=", byte);
- setup_row_direct(5, 6, byte);
-#if 0
- setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
- for(byte=0; byte<4; byte+=2) {
- setup_temp_row(byte+1,byte+3);
- }
-#endif
- setup_temp_row(5,6);
-
- verify_connection(7);
- }
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
- print_linkn("(6,5) link=", byte);
- setup_remote_row_direct(6, 5, byte);
- /*Till now 56, 65 done */
-#endif
-
- rename_temp_node(6);
- enable_routing(6);
-
-#if !CROSS_BAR_47_56
- setup_temp_row(0,1);
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte+1,byte+3);
- }
-
- verify_connection(7);
-
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
- print_linkn("(7,5) link=", byte);
- setup_row_local(7,7);
- setup_remote_row_direct(7, 5, byte);
-
-#else
- val = get_row(4,4);
- byte = ((val>>16) & 0xfe) - link_connection(4,2) - link_connection(4,6);
- byte = get_linkn_first(byte);
- print_linkn("(4,7) link=", byte);
- setup_row_direct(4, 7, byte);
-
- /* Setup and check temporary connection from Node 0 to Node 7 through 2, and 4*/
- for(byte=0; byte<4; byte+=2) {
- setup_temp_row(byte,byte+2);
- }
-
- verify_connection(7);
-
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
- print_linkn("(7,4) link=", byte);
- setup_row_local(7,7);
- setup_remote_row_direct(7, 4, byte);
- /* till now 4-7, 7-4 done. */
-#endif
- setup_remote_node(7); /* Setup the regs on the remote node */
-
-#if CROSS_BAR_47_56
- /* here init 5, 7 */
- /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/
- val = get_row(5,5);
- byte = ((val>>16) & 0xfe) - link_connection(5,3) - link_connection(5,6);
- byte = get_linkn_first(byte);
- print_linkn("(5,7) link=", byte);
- setup_row_direct(5, 7, byte);
-
- setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
- for(byte=0; byte<4; byte+=2) {
- setup_temp_row(byte+1,byte+3);
- }
-
- verify_connection(7);
-
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
- print_linkn("(7,5) link=", byte);
- setup_remote_row_direct(7, 5, byte);
- /*Till now 57, 75 done */
-
-#endif
-
- /* We need to init link between 6, and 7 direct link */
- val = get_row(6,6);
-#if !CROSS_BAR_47_56
- byte = ((val>>16) & 0xfe) - link_connection(6,4);
-#else
- byte = ((val>>16) & 0xfe) - link_connection(6,4) - link_connection(6,5);
-#endif
- byte = get_linkn_first(byte);
- print_linkn("(6,7) link=", byte);
- setup_row_direct(6,7, byte);
-
- val = get_row(7,7);
-#if !CROSS_BAR_47_56
- byte = ((val>>16) & 0xfe) - link_connection(7,5);
-#else
- byte = ((val>>16) & 0xfe) - link_connection(7,5) - link_connection(7,4);
-#endif
- byte = get_linkn_first(byte);
- print_linkn("(7,6) link=", byte);
- setup_row_direct(7,6, byte);
-
- /* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */
- static const u8 conn8_3[] = {
-#if !CROSS_BAR_47_56
- 0, 7, /* restore it*/
- 1, 7,
- 2, 7,
- 3, 7,
- 4, 7,
-
- 6, 1,
- 6, 2,
- 6, 3,
- 6, 5,
-
- 7, 0,
- 7, 1,
- 7, 2,
- 7, 3,
- 7, 4,
-#else
-
-
- 4, 5, 6, 1,
- 5, 4, 7, 1,
-
- 6, 1, 5, 0, // or 4, 1
- 6, 2, 4, 0,
- 6, 3, 5, 0, // or 4, 1
-
- 7, 0, 4, 0, // or 5, 1
- 7, 1, 5, 0,
- 7, 2, 4, 0, // or 5, 1
- 7, 3, 5, 0,
-
- 0, 7, 2, 0, /* restore it*/
- 1, 7, 3, 0,
- 2, 7, 4, 1,
- 3, 7, 5, 0,
-
- 2, 5, 4, 1, /* reset it */
- 3, 4, 5, 1,
-
- 4, 1, 2, 1, /* reset it */
- 4, 3, 2, 1,
-
- 5, 2, 3, 1, /* reset it */
- 5, 0, 3, 1,
-
-#endif
- };
-
- setup_row_indirect_group(conn8_3, sizeof(conn8_3)/sizeof(conn8_3[0]));
-
-#if CROSS_BAR_47_56
- /* for 47, 56, 57, 75, 46, 64 we need to substract another link to
- 6, 7, 6, 6, 7, 7 */
- static const u8 conn8_4[] = {
-//direct
- 4, 7, 6,
- 5, 6, 7,
- 5, 7, 6,
- 7, 5, 6,
- 4, 6, 7,
- 6, 4, 7,
-
-//in direct
- 0, 6, 1,
- 0, 7, 1,
-
- 1, 6, 0,
- 1, 7, 0,
-
- 2, 6, 3,
-// 2, 7, 3, +
-
-// 3, 6, 1, +
- 3, 7, 2,
-
- 6, 0, 7,
- 6, 1, 7, // needed for via 5
- 6, 1, 4, // ???
- 6, 2, 7,
- 6, 3, 7, // needed for via 5
- 6, 3, 4, //???
- 7, 0, 6, // needed for via 4
- 7, 0, 5, //???
- 7, 1, 6,
- 7, 2, 6, // needed for via 4
- 7, 2, 5, //???
- 7, 3, 6,
- };
-
- opt_broadcast_rt_group(conn8_4, sizeof(conn8_4)/sizeof(conn8_4[0]));
-
- static const u8 conn8_5[] = {
- 2, 7, 0,
-
- 3, 6, 1,
- };
-
- opt_broadcast_rt_plus_group(conn8_5, sizeof(conn8_5)/sizeof(conn8_5[0]));
-#endif
-
-
-
-/* ready to enable RT for Node 7 */
- enable_routing(7); /* enable routing on node 7 (temp.) */
-
- return nodes;
-}
-
-#endif /* CONFIG_MAX_PHYSICAL_CPUS > 6 */
-
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
-
-static unsigned setup_smp(void)
-{
- unsigned nodes;
-
- print_spew("Enabling SMP settings\r\n");
-
- nodes = setup_smp2();
-#if CONFIG_MAX_PHYSICAL_CPUS > 2
- if(nodes == 2)
- nodes = setup_smp4();
-#endif
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 4
- if(nodes == 4)
- nodes = setup_smp6();
-#endif
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 6
- if(nodes == 6)
- nodes = setup_smp8();
-#endif
-
-#if CONFIG_USE_PRINTK_IN_CAR
- printk_debug("%02x nodes initialized.\r\n", nodes);
-#else
- print_debug_hex8(nodes);
- print_debug(" nodes initialized.\r\n");
-#endif
-
- return nodes;
-}
-
-static unsigned verify_mp_capabilities(unsigned nodes)
-{
- unsigned node, mask;
-
- mask = 0x06; /* BigMPCap */
-
- for (node=0; node<nodes; node++) {
- mask &= pci_read_config32(NODE_MC(node), 0xe8);
- }
-
- switch(mask) {
-#if CONFIG_MAX_PHYSICAL_CPUS > 2
- case 0x02: /* MPCap */
- if(nodes > 2) {
- print_err("Going back to DP\r\n");
- return 2;
- }
- break;
-#endif
- case 0x00: /* Non SMP */
- if(nodes >1 ) {
- print_err("Going back to UP\r\n");
- return 1;
- }
- break;
- }
-
- return nodes;
-
-}
-
-
-static void clear_dead_routes(unsigned nodes)
-{
- int last_row;
- int node, row;
-#if CONFIG_MAX_PHYSICAL_CPUS == 8
- if(nodes==8) return;/* don't touch (7,7)*/
-#endif
- last_row = nodes;
- if (nodes == 1) {
- last_row = 0;
- }
- for(node = 7; node >= 0; node--) {
- for(row = 7; row >= last_row; row--) {
- fill_row(node, row, DEFAULT);
- }
- }
-
- /* Update the local row */
- for( node=0; node<nodes; node++) {
- uint32_t val = 0;
- for(row =0; row<nodes; row++) {
- val |= get_row(node, row);
- }
- fill_row(node, node, (((val & 0xff) | ((val >> 8) & 0xff)) << 16) | 0x0101);
- }
-}
-#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1 */
-
-#if CONFIG_LOGICAL_CPUS==1
-static unsigned verify_dualcore(unsigned nodes)
-{
- unsigned node, totalcpus, tmp;
-
- totalcpus = 0;
- for (node=0; node<nodes; node++) {
- tmp = (pci_read_config32(NODE_MC(node), 0xe8) >> 12) & 3 ;
- totalcpus += (tmp + 1);
- }
-
- return totalcpus;
-
-}
-#endif
-
-static void coherent_ht_finalize(unsigned nodes)
-{
- unsigned node;
-#if K8_REV_F_SUPPORT == 0
- int rev_a0;
-#endif
-#if CONFIG_LOGICAL_CPUS==1
- unsigned total_cpus;
-
- if(read_option(CMOS_VSTART_dual_core, CMOS_VLEN_dual_core, 0) == 0) { /* dual_core */
- total_cpus = verify_dualcore(nodes);
- }
- else {
- total_cpus = nodes;
- }
-#endif
-
- /* set up cpu count and node count and enable Limit
- * Config Space Range for all available CPUs.
- * Also clear non coherent hypertransport bus range
- * registers on Hammer A0 revision.
- */
-
- print_spew("coherent_ht_finalize\r\n");
-#if K8_REV_F_SUPPORT == 0
- rev_a0 = is_cpu_rev_a0();
-#endif
- for (node = 0; node < nodes; node++) {
- device_t dev;
- uint32_t val;
- dev = NODE_HT(node);
-
- /* Set the Total CPU and Node count in the system */
- val = pci_read_config32(dev, 0x60);
- val &= (~0x000F0070);
-#if CONFIG_LOGICAL_CPUS==1
- val |= ((total_cpus-1)<<16)|((nodes-1)<<4);
-#else
- val |= ((nodes-1)<<16)|((nodes-1)<<4);
-#endif
- pci_write_config32(dev, 0x60, val);
-
- /* Only respond to real cpu pci configuration cycles
- * and optimize the HT settings
- */
- val=pci_read_config32(dev, HT_TRANSACTION_CONTROL);
- val &= ~((HTTC_BUF_REL_PRI_MASK << HTTC_BUF_REL_PRI_SHIFT) |
- (HTTC_MED_PRI_BYP_CNT_MASK << HTTC_MED_PRI_BYP_CNT_SHIFT) |
- (HTTC_HI_PRI_BYP_CNT_MASK << HTTC_HI_PRI_BYP_CNT_SHIFT));
- val |= HTTC_LIMIT_CLDT_CFG |
- (HTTC_BUF_REL_PRI_8 << HTTC_BUF_REL_PRI_SHIFT) |
- (3 << HTTC_MED_PRI_BYP_CNT_SHIFT) |
- (3 << HTTC_HI_PRI_BYP_CNT_SHIFT);
- pci_write_config32(dev, HT_TRANSACTION_CONTROL, val);
-
-#if K8_REV_F_SUPPORT == 0
- if (rev_a0) {
- pci_write_config32(dev, 0x94, 0);
- pci_write_config32(dev, 0xb4, 0);
- pci_write_config32(dev, 0xd4, 0);
- }
-#endif
- }
-
- print_spew("done\r\n");
-}
-
-static int apply_cpu_errata_fixes(unsigned nodes)
-{
- unsigned node;
- int needs_reset = 0;
- for(node = 0; node < nodes; node++) {
- device_t dev;
- uint32_t cmd;
- dev = NODE_MC(node);
-#if K8_REV_F_SUPPORT == 0
- if (is_cpu_pre_c0()) {
-
- /* Errata 66
- * Limit the number of downstream posted requests to 1
- */
- cmd = pci_read_config32(dev, 0x70);
- if ((cmd & (3 << 0)) != 2) {
- cmd &= ~(3<<0);
- cmd |= (2<<0);
- pci_write_config32(dev, 0x70, cmd );
- needs_reset = 1;
- }
- cmd = pci_read_config32(dev, 0x7c);
- if ((cmd & (3 << 4)) != 0) {
- cmd &= ~(3<<4);
- cmd |= (0<<4);
- pci_write_config32(dev, 0x7c, cmd );
- needs_reset = 1;
- }
- /* Clock Power/Timing Low */
- cmd = pci_read_config32(dev, 0xd4);
- if (cmd != 0x000D0001) {
- cmd = 0x000D0001;
- pci_write_config32(dev, 0xd4, cmd);
- needs_reset = 1; /* Needed? */
- }
-
- }
- else if (is_cpu_pre_d0()) { // d0 later don't need it
- uint32_t cmd_ref;
- /* Errata 98
- * Set Clk Ramp Hystersis to 7
- * Clock Power/Timing Low
- */
- cmd_ref = 0x04e20707; /* Registered */
- cmd = pci_read_config32(dev, 0xd4);
- if(cmd != cmd_ref) {
- pci_write_config32(dev, 0xd4, cmd_ref );
- needs_reset = 1; /* Needed? */
- }
- }
-#endif
- }
- return needs_reset;
-}
-
-static int optimize_link_read_pointers(unsigned nodes)
-{
- unsigned node;
- int needs_reset = 0;
- for(node = 0; node < nodes; node++) {
- device_t f0_dev, f3_dev;
- uint32_t cmd_ref, cmd;
- int link;
- f0_dev = NODE_HT(node);
- f3_dev = NODE_MC(node);
- cmd_ref = cmd = pci_read_config32(f3_dev, 0xdc);
- for(link = 0; link < 3; link++) {
- uint32_t link_type;
- unsigned reg;
- /* This works on an Athlon64 because unimplemented links return 0 */
- reg = 0x98 + (link * 0x20);
- link_type = pci_read_config32(f0_dev, reg);
- /* Only handle coherent links */
- if ((link_type & (LinkConnected | InitComplete|NonCoherent)) ==
- (LinkConnected|InitComplete))
- {
- cmd &= ~(0xff << (link *8));
- cmd |= 0x25 << (link *8);
- }
- }
- if (cmd != cmd_ref) {
- pci_write_config32(f3_dev, 0xdc, cmd);
- needs_reset = 1;
- }
- }
- return needs_reset;
-}
-
-static inline unsigned get_nodes(void)
-{
- return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1;
-}
-
-static int optimize_link_coherent_ht(void)
-{
- int needs_reset = 0;
-
- unsigned nodes;
-
- nodes = get_nodes();
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
- if(nodes>1) {
- needs_reset |= optimize_connection(
- NODE_HT(0), 0x80 + link_to_register(link_connection(0,1)),
- NODE_HT(1), 0x80 + link_to_register(link_connection(1,0)) );
- }
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 2
- if(nodes>2) {
- /* optimize physical connections - by LYH */
- static const u8 opt_conn4[] = {
- 0,2,
- 1,3,
- 2,3,
- };
- needs_reset |= optimize_connection_group(opt_conn4, sizeof(opt_conn4)/sizeof(opt_conn4[0]));
- }
-#endif
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 4
- if(nodes>4) {
- static const uint8_t opt_conn6[] ={
- 2, 4,
- 3, 5,
- #if !CROSS_BAR_47_56
- 4, 5,
- #endif
- };
- needs_reset |= optimize_connection_group(opt_conn6, sizeof(opt_conn6)/sizeof(opt_conn6[0]));
- }
-#endif
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 6
- if(nodes>6) {
- static const uint8_t opt_conn8[] ={
- 4, 6,
- #if CROSS_BAR_47_56
- 4, 7,
- 5, 6,
- #endif
- 5, 7,
- 6, 7,
- };
- needs_reset |= optimize_connection_group(opt_conn8, sizeof(opt_conn8)/sizeof(opt_conn8[0]));
- }
-#endif
-
-#endif
-
- needs_reset |= apply_cpu_errata_fixes(nodes);
- needs_reset |= optimize_link_read_pointers(nodes);
-
- return needs_reset;
-}
-
-#if RAMINIT_SYSINFO == 1
-static void setup_coherent_ht_domain(void)
-#else
-static int setup_coherent_ht_domain(void)
-#endif
-{
- unsigned nodes;
- nodes = 1;
-
- enable_bsp_routing();
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
- nodes = setup_smp();
- nodes = verify_mp_capabilities(nodes);
- clear_dead_routes(nodes);
-#endif
-
- if (nodes == 1) {
- setup_uniprocessor();
- }
- coherent_ht_finalize(nodes);
-
-#if RAMINIT_SYSINFO == 0
- return optimize_link_coherent_ht();
-#endif
-}
-