diff options
| -rw-r--r-- | src/mainboard/google/volteer/variants/terrador/overridetree.cb | 47 | ||||
| -rw-r--r-- | src/mainboard/google/volteer/variants/todor/overridetree.cb | 47 |
2 files changed, 0 insertions, 94 deletions
diff --git a/src/mainboard/google/volteer/variants/terrador/overridetree.cb b/src/mainboard/google/volteer/variants/terrador/overridetree.cb index 2a5b98d891..45f1033910 100644 --- a/src/mainboard/google/volteer/variants/terrador/overridetree.cb +++ b/src/mainboard/google/volteer/variants/terrador/overridetree.cb @@ -101,21 +101,6 @@ chip soc/intel/tigerlake end device ref i2c1 on chip drivers/i2c/hid - register "generic.hid" = ""GDIX0000"" - register "generic.desc" = ""Goodix Touchscreen"" - register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" - register "generic.probed" = "1" - register "generic.reset_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" - register "generic.reset_delay_ms" = "120" - register "generic.reset_off_delay_ms" = "3" - register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" - register "generic.enable_delay_ms" = "12" - register "generic.has_power_resource" = "1" - register "hid_desc_reg_offset" = "0x01" - device i2c 14 on end - end - chip drivers/i2c/hid register "generic.hid" = ""ELAN90FC"" register "generic.desc" = ""ELAN Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" @@ -129,38 +114,6 @@ chip soc/intel/tigerlake device i2c 10 on end end end - device ref i2c2 on - chip drivers/i2c/sx9310 - register "desc" = ""SAR0 Proximity Sensor"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" - register "speed" = "I2C_SPEED_FAST" - register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" - device i2c 28 on end - end - end device ref i2c5 on chip drivers/i2c/hid register "generic.hid" = ""ELAN2700"" diff --git a/src/mainboard/google/volteer/variants/todor/overridetree.cb b/src/mainboard/google/volteer/variants/todor/overridetree.cb index 6956848790..bbfc016c62 100644 --- a/src/mainboard/google/volteer/variants/todor/overridetree.cb +++ b/src/mainboard/google/volteer/variants/todor/overridetree.cb @@ -103,21 +103,6 @@ chip soc/intel/tigerlake end device ref i2c1 on chip drivers/i2c/hid - register "generic.hid" = ""GDIX0000"" - register "generic.desc" = ""Goodix Touchscreen"" - register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" - register "generic.probed" = "1" - register "generic.reset_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" - register "generic.reset_delay_ms" = "120" - register "generic.reset_off_delay_ms" = "3" - register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" - register "generic.enable_delay_ms" = "12" - register "generic.has_power_resource" = "1" - register "hid_desc_reg_offset" = "0x01" - device i2c 14 on end - end - chip drivers/i2c/hid register "generic.hid" = ""ELAN90FC"" register "generic.desc" = ""ELAN Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" @@ -131,38 +116,6 @@ chip soc/intel/tigerlake device i2c 10 on end end end - device ref i2c2 on - chip drivers/i2c/sx9310 - register "desc" = ""SAR0 Proximity Sensor"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" - register "speed" = "I2C_SPEED_FAST" - register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" - device i2c 28 on end - end - end device ref i2c5 on chip drivers/i2c/hid register "generic.hid" = ""ELAN2700"" |