summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/arch/i386/Makefile.inc11
-rw-r--r--src/arch/i386/lib/failover.c50
-rw-r--r--src/arch/i386/lib/failover.lds1
-rw-r--r--src/cpu/intel/model_106cx/cache_as_ram_disable.c24
-rw-r--r--src/cpu/intel/model_6ex/cache_as_ram_disable.c24
-rw-r--r--src/cpu/intel/model_6fx/cache_as_ram_disable.c24
-rw-r--r--src/mainboard/amd/dbm690t/romstage.c58
-rw-r--r--src/mainboard/amd/mahogany/cache_as_ram_auto.c239
-rw-r--r--src/mainboard/amd/mahogany/romstage.c59
-rw-r--r--src/mainboard/amd/pistachio/romstage.c59
-rw-r--r--src/mainboard/arima/hdama/romstage.c64
-rw-r--r--src/mainboard/asus/a8v-e_se/romstage.c75
-rw-r--r--src/mainboard/broadcom/blast/romstage.c78
-rw-r--r--src/mainboard/dell/s1850/failover.c30
-rw-r--r--src/mainboard/emulation/qemu-x86/failover.c15
-rw-r--r--src/mainboard/ibm/e325/romstage.c65
-rw-r--r--src/mainboard/ibm/e326/romstage.c66
-rw-r--r--src/mainboard/intel/jarrell/failover.c29
-rw-r--r--src/mainboard/intel/xe7501devkit/failover.c31
-rw-r--r--src/mainboard/kontron/kt690/romstage.c58
-rw-r--r--src/mainboard/msi/ms9185/romstage.c77
-rw-r--r--src/mainboard/msi/ms9282/romstage.c72
-rw-r--r--src/mainboard/newisys/khepri/romstage.c70
-rw-r--r--src/mainboard/olpc/btest/failover.c22
-rw-r--r--src/mainboard/olpc/rev_a/failover.c22
-rw-r--r--src/mainboard/sunw/ultra40/romstage.c71
-rw-r--r--src/mainboard/supermicro/x6dai_g/failover.c29
-rw-r--r--src/mainboard/supermicro/x6dhe_g/failover.c29
-rw-r--r--src/mainboard/supermicro/x6dhe_g2/failover.c29
-rw-r--r--src/mainboard/supermicro/x6dhr_ig/failover.c29
-rw-r--r--src/mainboard/supermicro/x6dhr_ig2/failover.c29
-rw-r--r--src/mainboard/technexion/tim5690/romstage.c60
-rw-r--r--src/mainboard/technexion/tim8690/romstage.c59
-rw-r--r--src/mainboard/tyan/s2735/romstage.c46
-rw-r--r--src/mainboard/tyan/s2850/romstage.c71
-rw-r--r--src/mainboard/tyan/s2875/romstage.c67
-rw-r--r--src/mainboard/tyan/s2880/romstage.c66
-rw-r--r--src/mainboard/tyan/s2881/romstage.c71
-rw-r--r--src/mainboard/tyan/s2882/romstage.c66
-rw-r--r--src/mainboard/tyan/s2885/romstage.c71
-rw-r--r--src/mainboard/tyan/s2891/romstage.c74
-rw-r--r--src/mainboard/tyan/s2892/romstage.c72
-rw-r--r--src/mainboard/tyan/s4880/romstage.c66
-rw-r--r--src/mainboard/tyan/s4882/romstage.c65
-rw-r--r--src/mainboard/via/epia-m/failover.c22
-rw-r--r--src/mainboard/via/epia-n/failover.c22
46 files changed, 256 insertions, 2181 deletions
diff --git a/src/arch/i386/Makefile.inc b/src/arch/i386/Makefile.inc
index 1cb1e37919..f1b686198f 100644
--- a/src/arch/i386/Makefile.inc
+++ b/src/arch/i386/Makefile.inc
@@ -87,7 +87,6 @@ $(obj)/coreboot.a: $(objs)
crt0s :=
ldscripts :=
ldscripts += $(src)/arch/i386/init/ldscript_fallback_cbfs.lb
-ldscripts += $(src)/arch/i386/lib/failover.lds
ifeq ($(CONFIG_BIG_BOOTBLOCK),y)
crt0s += $(src)/cpu/x86/16bit/entry16.inc
ldscripts += $(src)/cpu/x86/16bit/entry16.lds
@@ -160,12 +159,6 @@ crt0s += $(src)/cpu/x86/car/cache_as_ram.inc
ldscripts += $(src)/cpu/x86/car/cache_as_ram.lds
endif
-ifeq ($(CONFIG_BIG_BOOTBLOCK),y)
-ifeq ($(CONFIG_ROMCC),y)
-crt0s += $(obj)/mainboard/$(MAINBOARDDIR)/failover.inc
-endif
-endif
-
ifeq ($(CONFIG_LLSHELL),y)
crt0s += $(src)/arch/i386/llshell/llshell.inc
endif
@@ -196,10 +189,6 @@ endif
ifeq ($(CONFIG_ROMCC),y)
ROMCCFLAGS ?= -mcpu=p2 -O2
-$(obj)/mainboard/$(MAINBOARDDIR)/failover.inc: $(obj)/romcc $(src)/arch/i386/lib/failover.c
- printf " ROMCC failover.inc\n"
- $(obj)/romcc $(ROMCCFLAGS) --label-prefix=failover $(INCLUDES) $(src)/arch/i386/lib/failover.c -o $@
-
$(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc: $(src)/mainboard/$(MAINBOARDDIR)/romstage.c $(obj)/romcc $(OPTION_TABLE_H) $(obj)/build.h
printf " ROMCC romstage.inc\n"
$(obj)/romcc $(ROMCCFLAGS) -include $(obj)/build.h $(INCLUDES) $< -o $@
diff --git a/src/arch/i386/lib/failover.c b/src/arch/i386/lib/failover.c
deleted file mode 100644
index 7beee8af4e..0000000000
--- a/src/arch/i386/lib/failover.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#define ASSEMBLY 1
-#define __PRE_RAM__
-
-#include <arch/io.h>
-#include "arch/romcc_io.h"
-#include "pc80/mc146818rtc_early.c"
-
-/**
- * Check whether the normal or the fallback image should be booted
- * (by reading the proper flag from CMOS), and boot it.
- *
- * @param bist The input BIST value.
- * @return The BIST value.
- */
-static unsigned long main(unsigned long bist)
-{
- if (do_normal_boot())
- goto normal_image;
- else
- goto fallback_image;
-
-normal_image:
- __asm__ __volatile__("jmp __normal_image" : : "a" (bist) : );
-
-cpu_reset:
- __asm__ __volatile__("jmp __cpu_reset" : : "a" (bist) : );
-
-fallback_image:
- return bist;
-}
diff --git a/src/arch/i386/lib/failover.lds b/src/arch/i386/lib/failover.lds
deleted file mode 100644
index 25f3200911..0000000000
--- a/src/arch/i386/lib/failover.lds
+++ /dev/null
@@ -1 +0,0 @@
- __normal_image = (CONFIG_ROMBASE & 0xfffffff0) - 8;
diff --git a/src/cpu/intel/model_106cx/cache_as_ram_disable.c b/src/cpu/intel/model_106cx/cache_as_ram_disable.c
index 939ec42aaf..4d108765c5 100644
--- a/src/cpu/intel/model_106cx/cache_as_ram_disable.c
+++ b/src/cpu/intel/model_106cx/cache_as_ram_disable.c
@@ -25,30 +25,6 @@ void stage1_main(unsigned long bist)
{
unsigned int cpu_reset = 0;
-#if !defined(CONFIG_TINY_BOOTBLOCK) || !CONFIG_TINY_BOOTBLOCK
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- } else {
- /* This is the primary cpu how should I boot? */
- check_cmos_failed();
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- );
- fallback_image:
-#endif
-#endif
-
real_main(bist);
/* No servicable parts below this line .. */
diff --git a/src/cpu/intel/model_6ex/cache_as_ram_disable.c b/src/cpu/intel/model_6ex/cache_as_ram_disable.c
index 6dac367c4d..cbf7cdd37b 100644
--- a/src/cpu/intel/model_6ex/cache_as_ram_disable.c
+++ b/src/cpu/intel/model_6ex/cache_as_ram_disable.c
@@ -27,30 +27,6 @@ void stage1_main(unsigned long bist)
{
unsigned int cpu_reset = 0;
-#if !defined(CONFIG_TINY_BOOTBLOCK) || !CONFIG_TINY_BOOTBLOCK
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- } else {
- /* This is the primary cpu how should I boot? */
- check_cmos_failed();
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- );
- fallback_image:
-#endif
-#endif
-
real_main(bist);
/* No servicable parts below this line .. */
diff --git a/src/cpu/intel/model_6fx/cache_as_ram_disable.c b/src/cpu/intel/model_6fx/cache_as_ram_disable.c
index 9af667d655..32d921e7d6 100644
--- a/src/cpu/intel/model_6fx/cache_as_ram_disable.c
+++ b/src/cpu/intel/model_6fx/cache_as_ram_disable.c
@@ -27,30 +27,6 @@ void stage1_main(unsigned long bist)
{
unsigned int cpu_reset = 0;
-#if !defined(CONFIG_TINY_BOOTBLOCK) || !CONFIG_TINY_BOOTBLOCK
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- } else {
- /* This is the primary cpu how should I boot? */
- check_cmos_failed();
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- );
- fallback_image:
-#endif
-#endif
-
real_main(bist);
/* No servicable parts below this line .. */
diff --git a/src/mainboard/amd/dbm690t/romstage.c b/src/mainboard/amd/dbm690t/romstage.c
index 697319356f..7f5a2700e7 100644
--- a/src/mainboard/amd/dbm690t/romstage.c
+++ b/src/mainboard/amd/dbm690t/romstage.c
@@ -100,60 +100,10 @@ static inline int spd_read_byte(u32 device, u32 address)
#include "cpu/amd/model_fxx/fidvid.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { /* RTC already inited */
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* sb600_lpc_port80(); */
- sb600_pci_port80();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
-normal_image:
- post_code(0x23);
- __asm__ volatile ("jmp __normal_image": /* outputs */
- :"a" (bist), "b"(cpu_init_detectedx) /* inputs */);
-
-fallback_image:
- post_code(0x25);
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
int needs_reset = 0;
u32 bsp_apicid = 0;
@@ -161,6 +111,14 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct cpuid_result cpuid1;
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ /* sb600_lpc_port80(); */
+ sb600_pci_port80();
+ }
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
diff --git a/src/mainboard/amd/mahogany/cache_as_ram_auto.c b/src/mainboard/amd/mahogany/cache_as_ram_auto.c
deleted file mode 100644
index 9538611e95..0000000000
--- a/src/mainboard/amd/mahogany/cache_as_ram_auto.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#define ASSEMBLY 1
-#define __PRE_RAM__
-
-#define RAMINIT_SYSINFO 1
-#define K8_SET_FIDVID 1
-#define QRANK_DIMM_SUPPORT 1
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
-
-#define RC0 (6<<8)
-#define RC1 (7<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-
-#define ICS951462_ADDRESS 0x69
-#define SMBUS_HUB 0x71
-
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-
-#define post_code(x) outb(x, 0x80)
-
-#include <cpu/amd/model_fxx_rev.h>
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "superio/ite/it8718f/it8718f_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#include "southbridge/amd/rs780/rs780_early_setup.c"
-#include "southbridge/amd/sb700/sb700_early_setup.c"
-
-/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-/* called in raminit_f.c */
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
-
-/*called in raminit_f.c */
-static inline int spd_read_byte(u32 device, u32 address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/amdk8.h"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "northbridge/amd/amdk8/raminit_f.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "lib/generic_sdram.c"
-#include "resourcemap.c"
-
-#include "cpu/amd/dualcore/dualcore.c"
-
-#include "cpu/amd/car/copy_and_run.c"
-#include "cpu/amd/car/post_cache_as_ram.c"
-
-#include "cpu/amd/model_fxx/init_cpus.c"
-
-#include "cpu/amd/model_fxx/fidvid.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
-#include "northbridge/amd/amdk8/early_ht.c"
-
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { /* RTC already inited */
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* sb700_lpc_port80(); */
- sb700_pci_port80();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
-normal_image:
- post_code(0x23);
- __asm__ volatile ("jmp __normal_image": /* outputs */
- :"a" (bist), "b"(cpu_init_detectedx) /* inputs */);
-
-fallback_image:
- post_code(0x25);
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
- int needs_reset = 0;
- u32 bsp_apicid = 0;
- msr_t msr;
- struct cpuid_result cpuid1;
- struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
- if (bist == 0) {
- bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
-
- enable_rs780_dev8();
- sb700_lpc_init();
-
- it8718f_enable_serial(0, CONFIG_TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
- printk_debug("bsp_apicid=0x%x\n", bsp_apicid);
-
- setup_mahogany_resource_map();
-
- setup_coherent_ht_domain();
-
-#if CONFIG_LOGICAL_CPUS==1
- /* It is said that we should start core1 after all core0 launched */
- wait_all_core0_started();
- start_other_cores();
-#endif
- wait_all_aps_started(bsp_apicid);
-
- ht_setup_chains_x(sysinfo);
-
- /* run _early_setup before soft-reset. */
- rs780_early_setup();
- sb700_early_setup();
-
-/* Check to see if processor is capable of changing FIDVID */
- /* otherwise it will throw a GP# when reading FIDVID_STATUS */
- cpuid1 = cpuid(0x80000007);
- if( (cpuid1.edx & 0x6) == 0x6 ) {
-
- /* Read FIDVID_STATUS */
- msr=rdmsr(0xc0010042);
- printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
- enable_fid_change();
- enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
- init_fidvid_bsp(bsp_apicid);
-
- /* show final fid and vid */
- msr=rdmsr(0xc0010042);
- printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
- } else {
- printk_debug("Changing FIDVID not supported\n");
- }
-
- needs_reset = optimize_link_coherent_ht();
- needs_reset |= optimize_link_incoherent_ht(sysinfo);
- rs780_htinit();
- printk_debug("needs_reset=0x%x\n", needs_reset);
-
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
- allow_all_aps_stop(bsp_apicid);
-
- /* It's the time to set ctrl now; */
- printk_debug("sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n",
- sysinfo->nodes, sysinfo->ctrl, spd_addr);
- fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
- sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
-
- rs780_before_pci_init();
- sb700_before_pci_init();
-
- post_cache_as_ram();
-}
diff --git a/src/mainboard/amd/mahogany/romstage.c b/src/mainboard/amd/mahogany/romstage.c
index 8aaeb64152..a6d2435e99 100644
--- a/src/mainboard/amd/mahogany/romstage.c
+++ b/src/mainboard/amd/mahogany/romstage.c
@@ -100,60 +100,10 @@ static inline int spd_read_byte(u32 device, u32 address)
#include "cpu/amd/model_fxx/fidvid.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { /* RTC already inited */
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* sb700_lpc_port80(); */
- sb700_pci_port80();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
-normal_image:
- post_code(0x23);
- __asm__ volatile ("jmp __normal_image": /* outputs */
- :"a" (bist), "b"(cpu_init_detectedx) /* inputs */);
-
-fallback_image:
- post_code(0x25);
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
int needs_reset = 0;
u32 bsp_apicid = 0;
@@ -161,6 +111,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct cpuid_result cpuid1;
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ /* sb700_lpc_port80(); */
+ sb700_pci_port80();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}
diff --git a/src/mainboard/amd/pistachio/romstage.c b/src/mainboard/amd/pistachio/romstage.c
index d440f4d2f9..0db2f3413b 100644
--- a/src/mainboard/amd/pistachio/romstage.c
+++ b/src/mainboard/amd/pistachio/romstage.c
@@ -94,60 +94,10 @@ static inline int spd_read_byte(u32 device, u32 address)
#include "cpu/amd/model_fxx/fidvid.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { /* RTC already inited */
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- sb600_lpc_port80();
- /* sb600_pci_port80(); */
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- normal_image:
- post_code(0x01);
- __asm__ volatile ("jmp __normal_image": /* outputs */
- :"a" (bist), "b"(cpu_init_detectedx)); /* inputs */
-
- fallback_image:
- post_code(0x02);
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
int needs_reset = 0;
u32 bsp_apicid = 0;
@@ -157,6 +107,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
(struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE -
CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ sb600_lpc_port80();
+ /* sb600_pci_port80(); */
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}
diff --git a/src/mainboard/arima/hdama/romstage.c b/src/mainboard/arima/hdama/romstage.c
index 19c4c6bc3f..7a851d6b1b 100644
--- a/src/mainboard/arima/hdama/romstage.c
+++ b/src/mainboard/arima/hdama/romstage.c
@@ -95,66 +95,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) , "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -169,6 +114,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/asus/a8v-e_se/romstage.c b/src/mainboard/asus/a8v-e_se/romstage.c
index b6c3c3f686..2161e43180 100644
--- a/src/mainboard/asus/a8v-e_se/romstage.c
+++ b/src/mainboard/asus/a8v-e_se/romstage.c
@@ -176,68 +176,8 @@ void sio_init(void)
pnp_exit_ext_func_mode(GPIO_DEV);
}
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- /* unsigned last_boot_normal_x = last_boot_normal(); */
- /* FIXME */
- unsigned last_boot_normal_x = 1;
-
- sio_init();
- w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- uart_init();
- console_init();
- enable_rom_decode();
-
- print_info("now booting... fallback\r\n");
-
- /* Is this a CPU only reset? Or is this a secondary CPU? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x)
- goto normal_image;
- else
- goto fallback_image;
- }
-
- /* Nothing special needs to be done to find bus 0. */
- /* Allow the HT devices to be found. */
- enumerate_ht_chain();
-
- /* Is this a deliberate reset by the BIOS? */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary CPU, how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
-
-normal_image:
- /* print_info("JMP normal image\r\n"); */
-
- __asm__ __volatile__("jmp __normal_image":
- :"a" (bist), "b" (cpu_init_detectedx));
-
-fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr[] = {
(0xa << 3) | 0, (0xa << 3) | 2, 0, 0,
(0xa << 3) | 1, (0xa << 3) | 3, 0, 0,
@@ -258,6 +198,21 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
console_init();
enable_rom_decode();
+ print_info("now booting... fallback\r\n");
+
+ /* Is this a CPU only reset? Or is this a secondary CPU? */
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0. */
+ /* Allow the HT devices to be found. */
+ enumerate_ht_chain();
+ }
+
+ sio_init();
+ w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ uart_init();
+ console_init();
+ enable_rom_decode();
+
print_info("now booting... real_main\r\n");
if (bist == 0)
diff --git a/src/mainboard/broadcom/blast/romstage.c b/src/mainboard/broadcom/blast/romstage.c
index 6169841f69..74d7bdebe2 100644
--- a/src/mainboard/broadcom/blast/romstage.c
+++ b/src/mainboard/broadcom/blast/romstage.c
@@ -106,74 +106,10 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { // RTC already inited
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- bcm5785_enable_rom();
-
- bcm5785_enable_lpc();
-
- //enable RTC
- pc87417_enable_dev(RTC_DEV);
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr[] = {
RC0|DIMM0, RC0|DIMM2, 0, 0,
RC0|DIMM1, RC0|DIMM3, 0, 0,
@@ -189,6 +125,20 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ bcm5785_enable_rom();
+
+ bcm5785_enable_lpc();
+
+ //enable RTC
+ pc87417_enable_dev(RTC_DEV);
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/dell/s1850/failover.c b/src/mainboard/dell/s1850/failover.c
index 1e03b08af8..3cc2c3d487 100644
--- a/src/mainboard/dell/s1850/failover.c
+++ b/src/mainboard/dell/s1850/failover.c
@@ -15,35 +15,5 @@
static unsigned long main(unsigned long bist)
{
/* skip all this nonsense as we are not doing fallback yet */
- goto fallback_image;
- /* Did just the cpu reset? */
- if (memory_initialized()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto cpu_reset;
- }
- }
-
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
return bist;
}
diff --git a/src/mainboard/emulation/qemu-x86/failover.c b/src/mainboard/emulation/qemu-x86/failover.c
index 6caba22698..c018d78f25 100644
--- a/src/mainboard/emulation/qemu-x86/failover.c
+++ b/src/mainboard/emulation/qemu-x86/failover.c
@@ -10,20 +10,5 @@
static void main(void)
{
-#if 0
- /* Is this a cpu reset? */
- if (cpu_init_detected()) {
- if (last_boot_normal()) {
- asm("jmp __normal_image");
- } else {
- asm("jmp __cpu_reset");
- }
- }
-
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- asm("jmp __normal_image");
- }
-#endif
}
diff --git a/src/mainboard/ibm/e325/romstage.c b/src/mainboard/ibm/e325/romstage.c
index 6621bf1272..7f461ba784 100644
--- a/src/mainboard/ibm/e325/romstage.c
+++ b/src/mainboard/ibm/e325/romstage.c
@@ -93,67 +93,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) , "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const struct mem_controller cpu[] = {
{
.node_id = 0,
@@ -179,6 +123,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/ibm/e326/romstage.c b/src/mainboard/ibm/e326/romstage.c
index 0ec2c52f48..e3e10bb435 100644
--- a/src/mainboard/ibm/e326/romstage.c
+++ b/src/mainboard/ibm/e326/romstage.c
@@ -92,68 +92,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) , "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const struct mem_controller cpu[] = {
{
.node_id = 0,
@@ -179,6 +122,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/intel/jarrell/failover.c b/src/mainboard/intel/jarrell/failover.c
index ac78182199..f561611a89 100644
--- a/src/mainboard/intel/jarrell/failover.c
+++ b/src/mainboard/intel/jarrell/failover.c
@@ -14,34 +14,5 @@
static unsigned long main(unsigned long bist)
{
- /* Did just the cpu reset? */
- if (memory_initialized()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto cpu_reset;
- }
- }
-
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
return bist;
}
diff --git a/src/mainboard/intel/xe7501devkit/failover.c b/src/mainboard/intel/xe7501devkit/failover.c
index 9daf3b27d6..775acca28b 100644
--- a/src/mainboard/intel/xe7501devkit/failover.c
+++ b/src/mainboard/intel/xe7501devkit/failover.c
@@ -13,36 +13,5 @@
static unsigned long main(unsigned long bist)
{
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else {
-
- check_cmos_failed();
-
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
-#if 0
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
-#endif
- fallback_image:
return bist;
}
diff --git a/src/mainboard/kontron/kt690/romstage.c b/src/mainboard/kontron/kt690/romstage.c
index 224f60365d..a2d20b9488 100644
--- a/src/mainboard/kontron/kt690/romstage.c
+++ b/src/mainboard/kontron/kt690/romstage.c
@@ -101,60 +101,10 @@ static inline int spd_read_byte(u32 device, u32 address)
#include "cpu/amd/model_fxx/fidvid.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { /* RTC already inited */
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* sb600_lpc_port80(); */
- sb600_pci_port80();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
-normal_image:
- post_code(0x23);
- __asm__ volatile ("jmp __normal_image": /* outputs */
- :"a" (bist), "b"(cpu_init_detectedx) /* inputs */);
-
-fallback_image:
- post_code(0x25);
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
device_t dev;
static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
int needs_reset = 0;
@@ -163,6 +113,14 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct cpuid_result cpuid1;
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ /* sb600_lpc_port80(); */
+ sb600_pci_port80();
+ }
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
diff --git a/src/mainboard/msi/ms9185/romstage.c b/src/mainboard/msi/ms9185/romstage.c
index 4903b3edd7..1696ac9e2c 100644
--- a/src/mainboard/msi/ms9185/romstage.c
+++ b/src/mainboard/msi/ms9185/romstage.c
@@ -153,73 +153,10 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/fidvid.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { // RTC already inited
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- bcm5785_enable_rom();
-
- bcm5785_enable_lpc();
-
- //enable RTC
- pc87417_enable_dev(RTC_DEV);
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr[] = {
//first node
RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6,
@@ -237,6 +174,20 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
unsigned bsp_apicid = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ bcm5785_enable_rom();
+
+ bcm5785_enable_lpc();
+
+ //enable RTC
+ pc87417_enable_dev(RTC_DEV);
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}
diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c
index b552788a54..5e67feb4c0 100644
--- a/src/mainboard/msi/ms9282/romstage.c
+++ b/src/mainboard/msi/ms9282/romstage.c
@@ -133,8 +133,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
#include "cpu/amd/model_fxx/fidvid.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@@ -156,68 +154,12 @@ static void sio_setup(void)
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the mcp55 */
- mcp55_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b"(cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
//CPU 1 mem is on SMBUS_HUB channel 2, and CPU 2 mem is on channel 1.
#define RC0 (2<<8)
#define RC1 (1<<8)
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
RC0|(0xa<<3)|0, RC0|(0xa<<3)|2, RC0|(0xa<<3)|4, RC0|(0xa<<3)|6,
@@ -233,6 +175,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
char *p ;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the mcp55 */
+ mcp55_enable_rom();
+ }
+
if (bist == 0) {
//init_cpus(cpu_init_detectedx);
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
diff --git a/src/mainboard/newisys/khepri/romstage.c b/src/mainboard/newisys/khepri/romstage.c
index e4c52d0843..65c562a347 100644
--- a/src/mainboard/newisys/khepri/romstage.c
+++ b/src/mainboard/newisys/khepri/romstage.c
@@ -108,71 +108,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- /* Setup the amd8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -188,6 +128,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ /* Setup the amd8111 */
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/olpc/btest/failover.c b/src/mainboard/olpc/btest/failover.c
index 1b6c6da9b1..8f000489ec 100644
--- a/src/mainboard/olpc/btest/failover.c
+++ b/src/mainboard/olpc/btest/failover.c
@@ -9,27 +9,5 @@
static unsigned long main(unsigned long bist)
{
-#if 0
- /* This is the primary cpu how should I boot? */
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
-#endif
return bist;
}
diff --git a/src/mainboard/olpc/rev_a/failover.c b/src/mainboard/olpc/rev_a/failover.c
index 1b6c6da9b1..8f000489ec 100644
--- a/src/mainboard/olpc/rev_a/failover.c
+++ b/src/mainboard/olpc/rev_a/failover.c
@@ -9,27 +9,5 @@
static unsigned long main(unsigned long bist)
{
-#if 0
- /* This is the primary cpu how should I boot? */
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
-#endif
return bist;
}
diff --git a/src/mainboard/sunw/ultra40/romstage.c b/src/mainboard/sunw/ultra40/romstage.c
index 9a3f948036..ef97cf4417 100644
--- a/src/mainboard/sunw/ultra40/romstage.c
+++ b/src/mainboard/sunw/ultra40/romstage.c
@@ -112,8 +112,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@@ -146,65 +144,8 @@ static void sio_setup(void)
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -220,6 +161,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the ck804 */
+ ck804_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/supermicro/x6dai_g/failover.c b/src/mainboard/supermicro/x6dai_g/failover.c
index 94befc5270..c50fbcabcb 100644
--- a/src/mainboard/supermicro/x6dai_g/failover.c
+++ b/src/mainboard/supermicro/x6dai_g/failover.c
@@ -14,34 +14,5 @@
static unsigned long main(unsigned long bist)
{
- /* Did just the cpu reset? */
- if (memory_initialized()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto cpu_reset;
- }
- }
-
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
return bist;
}
diff --git a/src/mainboard/supermicro/x6dhe_g/failover.c b/src/mainboard/supermicro/x6dhe_g/failover.c
index ac78182199..f561611a89 100644
--- a/src/mainboard/supermicro/x6dhe_g/failover.c
+++ b/src/mainboard/supermicro/x6dhe_g/failover.c
@@ -14,34 +14,5 @@
static unsigned long main(unsigned long bist)
{
- /* Did just the cpu reset? */
- if (memory_initialized()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto cpu_reset;
- }
- }
-
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
return bist;
}
diff --git a/src/mainboard/supermicro/x6dhe_g2/failover.c b/src/mainboard/supermicro/x6dhe_g2/failover.c
index ac78182199..f561611a89 100644
--- a/src/mainboard/supermicro/x6dhe_g2/failover.c
+++ b/src/mainboard/supermicro/x6dhe_g2/failover.c
@@ -14,34 +14,5 @@
static unsigned long main(unsigned long bist)
{
- /* Did just the cpu reset? */
- if (memory_initialized()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto cpu_reset;
- }
- }
-
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
return bist;
}
diff --git a/src/mainboard/supermicro/x6dhr_ig/failover.c b/src/mainboard/supermicro/x6dhr_ig/failover.c
index ac78182199..f561611a89 100644
--- a/src/mainboard/supermicro/x6dhr_ig/failover.c
+++ b/src/mainboard/supermicro/x6dhr_ig/failover.c
@@ -14,34 +14,5 @@
static unsigned long main(unsigned long bist)
{
- /* Did just the cpu reset? */
- if (memory_initialized()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto cpu_reset;
- }
- }
-
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
return bist;
}
diff --git a/src/mainboard/supermicro/x6dhr_ig2/failover.c b/src/mainboard/supermicro/x6dhr_ig2/failover.c
index ac78182199..f561611a89 100644
--- a/src/mainboard/supermicro/x6dhr_ig2/failover.c
+++ b/src/mainboard/supermicro/x6dhr_ig2/failover.c
@@ -14,34 +14,5 @@
static unsigned long main(unsigned long bist)
{
- /* Did just the cpu reset? */
- if (memory_initialized()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto cpu_reset;
- }
- }
-
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
return bist;
}
diff --git a/src/mainboard/technexion/tim5690/romstage.c b/src/mainboard/technexion/tim5690/romstage.c
index 4919078424..7dccfe2047 100644
--- a/src/mainboard/technexion/tim5690/romstage.c
+++ b/src/mainboard/technexion/tim5690/romstage.c
@@ -103,61 +103,10 @@ static inline int spd_read_byte(u32 device, u32 address)
#include "tn_post_code.c"
#include "speaker.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { /* RTC already inited */
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* sb600_lpc_port80(); */
- sb600_pci_port80();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
-normal_image:
- post_code(0x23);
- __asm__ volatile ("jmp __normal_image": /* outputs */
- :"a" (bist), "b"(cpu_init_detectedx) /* inputs */);
-
-fallback_image:
- post_code(0x25);
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
int needs_reset = 0;
u32 bsp_apicid = 0;
@@ -165,6 +114,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct cpuid_result cpuid1;
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ /* sb600_lpc_port80(); */
+ sb600_pci_port80();
+ }
+
technexion_post_code_init();
technexion_post_code(LED_MESSAGE_START);
diff --git a/src/mainboard/technexion/tim8690/romstage.c b/src/mainboard/technexion/tim8690/romstage.c
index ff86ba3713..a101b1a495 100644
--- a/src/mainboard/technexion/tim8690/romstage.c
+++ b/src/mainboard/technexion/tim8690/romstage.c
@@ -100,60 +100,10 @@ static inline int spd_read_byte(u32 device, u32 address)
#include "cpu/amd/model_fxx/fidvid.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { /* RTC already inited */
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* sb600_lpc_port80(); */
- sb600_pci_port80();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
-normal_image:
- post_code(0x23);
- __asm__ volatile ("jmp __normal_image": /* outputs */
- :"a" (bist), "b"(cpu_init_detectedx) /* inputs */);
-
-fallback_image:
- post_code(0x25);
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
int needs_reset = 0;
u32 bsp_apicid = 0;
@@ -162,6 +112,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ /* sb600_lpc_port80(); */
+ sb600_pci_port80();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}
diff --git a/src/mainboard/tyan/s2735/romstage.c b/src/mainboard/tyan/s2735/romstage.c
index 5e2678a047..6bcb459236 100644
--- a/src/mainboard/tyan/s2735/romstage.c
+++ b/src/mainboard/tyan/s2735/romstage.c
@@ -80,54 +80,8 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/x86/car/copy_and_run.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
-#include "southbridge/intel/i82801ex/cmos_failover.c"
-
-void real_main(unsigned long bist);
-
void amd64_main(unsigned long bist)
{
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else {
- check_cmos_failed();
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- );
- cpu_reset:
-// post_code(0x24);
-#if 0
- //CPU reset will reset memtroller ???
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- );
-#endif
-
- fallback_image:
-// post_code(0x25);
- real_main(bist);
-}
-void real_main(unsigned long bist)
-#else
-void amd64_main(unsigned long bist)
-#endif
-{
static const struct mem_controller memctrl[] = {
{
.d0 = PCI_DEV(0, 0, 0),
diff --git a/src/mainboard/tyan/s2850/romstage.c b/src/mainboard/tyan/s2850/romstage.c
index 352feadf70..d6b13b0b55 100644
--- a/src/mainboard/tyan/s2850/romstage.c
+++ b/src/mainboard/tyan/s2850/romstage.c
@@ -93,72 +93,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- /* Setup the amd8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const struct mem_controller cpu[] = {
{
.node_id = 0,
@@ -173,6 +112,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ /* Setup the amd8111 */
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2875/romstage.c b/src/mainboard/tyan/s2875/romstage.c
index 50b12f1ff6..12f41e0ff4 100644
--- a/src/mainboard/tyan/s2875/romstage.c
+++ b/src/mainboard/tyan/s2875/romstage.c
@@ -84,69 +84,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx)/* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const struct mem_controller cpu[] = {
{
.node_id = 0,
@@ -172,6 +114,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2880/romstage.c b/src/mainboard/tyan/s2880/romstage.c
index c97f3b7708..553910ae73 100644
--- a/src/mainboard/tyan/s2880/romstage.c
+++ b/src/mainboard/tyan/s2880/romstage.c
@@ -85,68 +85,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const struct mem_controller cpu[] = {
{
.node_id = 0,
@@ -172,6 +115,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2881/romstage.c b/src/mainboard/tyan/s2881/romstage.c
index 9d5edcb462..536f887112 100644
--- a/src/mainboard/tyan/s2881/romstage.c
+++ b/src/mainboard/tyan/s2881/romstage.c
@@ -98,72 +98,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- /* Setup the amd8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -179,6 +118,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ /* Setup the amd8111 */
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2882/romstage.c b/src/mainboard/tyan/s2882/romstage.c
index cdea6933ed..2fe7561deb 100644
--- a/src/mainboard/tyan/s2882/romstage.c
+++ b/src/mainboard/tyan/s2882/romstage.c
@@ -88,68 +88,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) , "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const struct mem_controller cpu[] = {
{
.node_id = 0,
@@ -175,6 +118,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2885/romstage.c b/src/mainboard/tyan/s2885/romstage.c
index d561e033c6..5b178f7e9f 100644
--- a/src/mainboard/tyan/s2885/romstage.c
+++ b/src/mainboard/tyan/s2885/romstage.c
@@ -98,72 +98,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- /* Setup the amd8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -179,6 +118,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ /* Setup the amd8111 */
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2891/romstage.c b/src/mainboard/tyan/s2891/romstage.c
index 9ace5e30ae..0505493dc1 100644
--- a/src/mainboard/tyan/s2891/romstage.c
+++ b/src/mainboard/tyan/s2891/romstage.c
@@ -77,8 +77,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@@ -112,68 +110,8 @@ static void sio_setup(void)
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b"(cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -189,6 +127,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the ck804 */
+ ck804_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2892/romstage.c b/src/mainboard/tyan/s2892/romstage.c
index e94017e532..1a4766cbea 100644
--- a/src/mainboard/tyan/s2892/romstage.c
+++ b/src/mainboard/tyan/s2892/romstage.c
@@ -82,8 +82,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@@ -101,66 +99,8 @@ static void sio_setup(void)
pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b"(cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
- #if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
- #endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -176,6 +116,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the ck804 */
+ ck804_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s4880/romstage.c b/src/mainboard/tyan/s4880/romstage.c
index 9f38ec1992..590de9f922 100644
--- a/src/mainboard/tyan/s4880/romstage.c
+++ b/src/mainboard/tyan/s4880/romstage.c
@@ -111,68 +111,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const struct mem_controller cpu[] = {
{
.node_id = 0,
@@ -222,6 +165,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s4882/romstage.c b/src/mainboard/tyan/s4882/romstage.c
index 1c8d3b42fe..d1233b4d31 100644
--- a/src/mainboard/tyan/s4882/romstage.c
+++ b/src/mainboard/tyan/s4882/romstage.c
@@ -119,67 +119,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" ( cpu_init_detectedx ) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
RC0|DIMM0, RC0|DIMM2, 0, 0,
RC0|DIMM1, RC0|DIMM3, 0, 0,
@@ -201,6 +145,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/via/epia-m/failover.c b/src/mainboard/via/epia-m/failover.c
index 1b6c6da9b1..8f000489ec 100644
--- a/src/mainboard/via/epia-m/failover.c
+++ b/src/mainboard/via/epia-m/failover.c
@@ -9,27 +9,5 @@
static unsigned long main(unsigned long bist)
{
-#if 0
- /* This is the primary cpu how should I boot? */
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
-#endif
return bist;
}
diff --git a/src/mainboard/via/epia-n/failover.c b/src/mainboard/via/epia-n/failover.c
index 1b6c6da9b1..8f000489ec 100644
--- a/src/mainboard/via/epia-n/failover.c
+++ b/src/mainboard/via/epia-n/failover.c
@@ -9,27 +9,5 @@
static unsigned long main(unsigned long bist)
{
-#if 0
- /* This is the primary cpu how should I boot? */
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
-#endif
return bist;
}