diff options
51 files changed, 62 insertions, 62 deletions
diff --git a/src/mainboard/advansus/a785e-i/resourcemap.c b/src/mainboard/advansus/a785e-i/resourcemap.c index 4f2c074bd6..19181fb2a9 100644 --- a/src/mainboard/advansus/a785e-i/resourcemap.c +++ b/src/mainboard/advansus/a785e-i/resourcemap.c @@ -119,7 +119,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/amd/bimini_fam10/mainboard.c b/src/mainboard/amd/bimini_fam10/mainboard.c index 572405d56d..6372c4b5d2 100644 --- a/src/mainboard/amd/bimini_fam10/mainboard.c +++ b/src/mainboard/amd/bimini_fam10/mainboard.c @@ -29,7 +29,7 @@ static void enable_int_gfx(void) volatile u8 *gpio_reg; - pm_iowrite(0xEA, 0x01); /* diable the PCIB */ + pm_iowrite(0xEA, 0x01); /* disable the PCIB */ /* Disable Gec */ byte = pm_ioread(0xF6); byte |= 1; diff --git a/src/mainboard/amd/bimini_fam10/resourcemap.c b/src/mainboard/amd/bimini_fam10/resourcemap.c index dbd6341f23..b647f48129 100644 --- a/src/mainboard/amd/bimini_fam10/resourcemap.c +++ b/src/mainboard/amd/bimini_fam10/resourcemap.c @@ -120,7 +120,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/amd/db-ft3b-lc/mptable.c b/src/mainboard/amd/db-ft3b-lc/mptable.c index 020bc270c3..ebe20ace98 100644 --- a/src/mainboard/amd/db-ft3b-lc/mptable.c +++ b/src/mainboard/amd/db-ft3b-lc/mptable.c @@ -30,7 +30,7 @@ static void *smp_write_config_table(void *v) struct mp_config_table *mc; int bus_isa; - /* Intialize the MP_Table */ + /* Initialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); diff --git a/src/mainboard/amd/lamar/mptable.c b/src/mainboard/amd/lamar/mptable.c index 92b4d273f4..7cc635cef4 100644 --- a/src/mainboard/amd/lamar/mptable.c +++ b/src/mainboard/amd/lamar/mptable.c @@ -44,7 +44,7 @@ static void *smp_write_config_table(void *v) struct mp_config_table *mc; int bus_isa; - /* Intialize the MP_Table */ + /* Initialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); diff --git a/src/mainboard/amd/mahogany_fam10/resourcemap.c b/src/mainboard/amd/mahogany_fam10/resourcemap.c index 95d009ac1e..acdf645a54 100644 --- a/src/mainboard/amd/mahogany_fam10/resourcemap.c +++ b/src/mainboard/amd/mahogany_fam10/resourcemap.c @@ -121,7 +121,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/amd/persimmon/mainboard.c b/src/mainboard/amd/persimmon/mainboard.c index c21e0eac55..95aec3deb9 100644 --- a/src/mainboard/amd/persimmon/mainboard.c +++ b/src/mainboard/amd/persimmon/mainboard.c @@ -85,7 +85,7 @@ static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { */ /* * Persimmon has PCI slot INTA/B/C/D connected to PIRQE/F/G/H - * but because PCI INT_PIN swizzling isnt implemented to match + * but because PCI INT_PIN swizzling isn't implemented to match * the IDSEL (dev 3) of the slot, the table is adjusted for the * swizzle and INTA is connected to PIRQH so PINA/B/C/D on * off-chip devices should get mapped to PIRQH/E/F/G. diff --git a/src/mainboard/amd/persimmon/mptable.c b/src/mainboard/amd/persimmon/mptable.c index ccf09580b3..9e92ae8e55 100644 --- a/src/mainboard/amd/persimmon/mptable.c +++ b/src/mainboard/amd/persimmon/mptable.c @@ -39,7 +39,7 @@ static void *smp_write_config_table(void *v) u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - /* Intialize the MP_Table */ + /* Initialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/resourcemap.c b/src/mainboard/amd/serengeti_cheetah_fam10/resourcemap.c index fd14a80c42..0e47c52784 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/resourcemap.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/resourcemap.c @@ -119,7 +119,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/amd/south_station/mainboard.c b/src/mainboard/amd/south_station/mainboard.c index d0698382dd..1587d32faf 100644 --- a/src/mainboard/amd/south_station/mainboard.c +++ b/src/mainboard/amd/south_station/mainboard.c @@ -18,7 +18,7 @@ #include <device/device.h> #include <southbridge/amd/sb800/sb800.h> -#include "SBPLATFORM.h" /* Platfrom Specific Definitions */ +#include "SBPLATFORM.h" /* Platform Specific Definitions */ /** * Southstation using SB GPIO 17/18 to control the Red/Green LED diff --git a/src/mainboard/amd/tilapia_fam10/resourcemap.c b/src/mainboard/amd/tilapia_fam10/resourcemap.c index d696c4dfb3..5a4381424a 100644 --- a/src/mainboard/amd/tilapia_fam10/resourcemap.c +++ b/src/mainboard/amd/tilapia_fam10/resourcemap.c @@ -119,7 +119,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/amd/torpedo/gpio.h b/src/mainboard/amd/torpedo/gpio.h index 04897f5c24..938de5323e 100644 --- a/src/mainboard/amd/torpedo/gpio.h +++ b/src/mainboard/amd/torpedo/gpio.h @@ -298,8 +298,8 @@ #define GPIO_187_SELECT FUNCTION2 // USED AS AC LED INDICATOR, LOW ACTIVE #define GPIO_188_SELECT FUNCTION2 // default used AS BATT LED INDICATOR, LOW ACTIVE // option for HDMI CEC signal OW ACTIVE -#define GPIO_189_SELECT FUNCTION1 // USED AS AC_OK RECIEVER, INPUT, low active -#define GPIO_190_SELECT FUNCTION1 // USED TO MONITER INTERUPT FROM BATT CHARGER, INPUT +#define GPIO_189_SELECT FUNCTION1 // USED AS AC_OK RECEIVER, INPUT, low active +#define GPIO_190_SELECT FUNCTION1 // USED TO MONITER INTERRUPT FROM BATT CHARGER, INPUT #define GPIO_191_SELECT FUNCTION0+NonGpio // TOUCH PAD, DATA #define GPIO_192_SELECT FUNCTION0+NonGpio // TOUCH PAD, CLK #define GPIO_193_SELECT FUNCTION0+NonGpio // SMBUS CLK, diff --git a/src/mainboard/amd/torpedo/platform_cfg.h b/src/mainboard/amd/torpedo/platform_cfg.h index 72a97d1322..622fffec39 100644 --- a/src/mainboard/amd/torpedo/platform_cfg.h +++ b/src/mainboard/amd/torpedo/platform_cfg.h @@ -329,7 +329,7 @@ /** * @section INCHIP_AZALIA_CONTROLLER INCHIP_AZALIA_CONTROLLER * @li <b>0</b> - Auto : Detect Azalia controller automatically. - * @li <b>1</b> - Diable : Disable Azalia controller. + * @li <b>1</b> - Disable : Disable Azalia controller. * @li <b>2</b> - Enable : Enable Azalia controller. */ #define INCHIP_AZALIA_CONTROLLER 2 diff --git a/src/mainboard/amd/union_station/mainboard.c b/src/mainboard/amd/union_station/mainboard.c index 8c71fd64fe..7ed27d8041 100644 --- a/src/mainboard/amd/union_station/mainboard.c +++ b/src/mainboard/amd/union_station/mainboard.c @@ -17,7 +17,7 @@ #include <device/device.h> #include <southbridge/amd/sb800/sb800.h> -#include "SBPLATFORM.h" /* Platfrom Specific Definitions */ +#include "SBPLATFORM.h" /* Platform Specific Definitions */ /********************************************** * Enable the dedicated functions of the board. diff --git a/src/mainboard/asus/am1i-a/mptable.c b/src/mainboard/asus/am1i-a/mptable.c index bc7853b14d..82be63955b 100644 --- a/src/mainboard/asus/am1i-a/mptable.c +++ b/src/mainboard/asus/am1i-a/mptable.c @@ -39,7 +39,7 @@ static void *smp_write_config_table(void *v) u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - /* Intialize the MP_Table */ + /* Initialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); diff --git a/src/mainboard/asus/kcma-d8/resourcemap.c b/src/mainboard/asus/kcma-d8/resourcemap.c index 0de14adbbe..60bc3a7b30 100644 --- a/src/mainboard/asus/kcma-d8/resourcemap.c +++ b/src/mainboard/asus/kcma-d8/resourcemap.c @@ -124,7 +124,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, @@ -379,7 +379,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/asus/kfsn4-dre/resourcemap.c b/src/mainboard/asus/kfsn4-dre/resourcemap.c index f4e549b17f..9644201da4 100644 --- a/src/mainboard/asus/kfsn4-dre/resourcemap.c +++ b/src/mainboard/asus/kfsn4-dre/resourcemap.c @@ -124,7 +124,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/asus/kgpe-d16/resourcemap.c b/src/mainboard/asus/kgpe-d16/resourcemap.c index dcd7f774a7..c4dea39dbc 100644 --- a/src/mainboard/asus/kgpe-d16/resourcemap.c +++ b/src/mainboard/asus/kgpe-d16/resourcemap.c @@ -124,7 +124,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, @@ -379,7 +379,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/asus/m4a78-em/mainboard.c b/src/mainboard/asus/m4a78-em/mainboard.c index 8a017a0b49..b39f9db259 100644 --- a/src/mainboard/asus/m4a78-em/mainboard.c +++ b/src/mainboard/asus/m4a78-em/mainboard.c @@ -76,7 +76,7 @@ void set_pcie_reset(void) /* * justify the dev3 is exist or not * NOTE: This just copied from AMD Tilapia code. - * It is completly unknown if it will work at all for this board. + * It is completely unknown if it will work at all for this board. */ int is_dev3_present(void) { diff --git a/src/mainboard/asus/m4a78-em/resourcemap.c b/src/mainboard/asus/m4a78-em/resourcemap.c index 95d009ac1e..acdf645a54 100644 --- a/src/mainboard/asus/m4a78-em/resourcemap.c +++ b/src/mainboard/asus/m4a78-em/resourcemap.c @@ -121,7 +121,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/asus/m4a785-m/mainboard.c b/src/mainboard/asus/m4a785-m/mainboard.c index 23ead56fce..00a12cca4b 100644 --- a/src/mainboard/asus/m4a785-m/mainboard.c +++ b/src/mainboard/asus/m4a785-m/mainboard.c @@ -86,7 +86,7 @@ void set_pcie_reset(void) /* * justify the dev3 is exist or not * NOTE: This just copied from AMD Tilapia code. - * It is completly unknown it it will work at all for ASUS M4A785-M. + * It is completely unknown it it will work at all for ASUS M4A785-M. */ int is_dev3_present(void) { diff --git a/src/mainboard/asus/m4a785-m/resourcemap.c b/src/mainboard/asus/m4a785-m/resourcemap.c index 95d009ac1e..acdf645a54 100644 --- a/src/mainboard/asus/m4a785-m/resourcemap.c +++ b/src/mainboard/asus/m4a785-m/resourcemap.c @@ -121,7 +121,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/asus/m5a88-v/resourcemap.c b/src/mainboard/asus/m5a88-v/resourcemap.c index 2978bab7a9..2987b7c8fc 100644 --- a/src/mainboard/asus/m5a88-v/resourcemap.c +++ b/src/mainboard/asus/m5a88-v/resourcemap.c @@ -119,7 +119,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/avalue/eax-785e/resourcemap.c b/src/mainboard/avalue/eax-785e/resourcemap.c index 4f2c074bd6..19181fb2a9 100644 --- a/src/mainboard/avalue/eax-785e/resourcemap.c +++ b/src/mainboard/avalue/eax-785e/resourcemap.c @@ -119,7 +119,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/bap/ode_e20XX/mptable.c b/src/mainboard/bap/ode_e20XX/mptable.c index bc42bb08f3..42d8431a92 100644 --- a/src/mainboard/bap/ode_e20XX/mptable.c +++ b/src/mainboard/bap/ode_e20XX/mptable.c @@ -38,7 +38,7 @@ static void *smp_write_config_table(void *v) u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - /* Intialize the MP_Table */ + /* Initialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); diff --git a/src/mainboard/biostar/am1ml/mptable.c b/src/mainboard/biostar/am1ml/mptable.c index 1124ad9d75..dcf4321c3b 100644 --- a/src/mainboard/biostar/am1ml/mptable.c +++ b/src/mainboard/biostar/am1ml/mptable.c @@ -38,7 +38,7 @@ static void *smp_write_config_table(void *v) u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - /* Intialize the MP_Table */ + /* Initialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); diff --git a/src/mainboard/elmex/pcm205400/mainboard.c b/src/mainboard/elmex/pcm205400/mainboard.c index 01d67c463c..8f8b735364 100644 --- a/src/mainboard/elmex/pcm205400/mainboard.c +++ b/src/mainboard/elmex/pcm205400/mainboard.c @@ -84,7 +84,7 @@ static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { */ /* * Persimmon has PCI slot INTA/B/C/D connected to PIRQE/F/G/H - * but because PCI INT_PIN swizzling isnt implemented to match + * but because PCI INT_PIN swizzling isn't implemented to match * the IDSEL (dev 3) of the slot, the table is adjusted for the * swizzle and INTA is connected to PIRQH so PINA/B/C/D on * off-chip devices should get mapped to PIRQH/E/F/G. diff --git a/src/mainboard/elmex/pcm205400/mptable.c b/src/mainboard/elmex/pcm205400/mptable.c index ccf09580b3..9e92ae8e55 100644 --- a/src/mainboard/elmex/pcm205400/mptable.c +++ b/src/mainboard/elmex/pcm205400/mptable.c @@ -39,7 +39,7 @@ static void *smp_write_config_table(void *v) u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - /* Intialize the MP_Table */ + /* Initialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); diff --git a/src/mainboard/emulation/qemu-armv7/mainboard.c b/src/mainboard/emulation/qemu-armv7/mainboard.c index d91d77a097..857365b3a7 100644 --- a/src/mainboard/emulation/qemu-armv7/mainboard.c +++ b/src/mainboard/emulation/qemu-armv7/mainboard.c @@ -36,7 +36,7 @@ static void init_gfx(void) write32(pl111 + 1, height - 1); /* registers 2, 3 and 5 are ignored by qemu. Set them correctly if we ever go for real hw. */ - /* framebuffer adress offset. Has to be in vram. */ + /* framebuffer address offset. Has to be in vram. */ write32(pl111 + 4, framebuffer); write32(pl111 + 7, 0); write32(pl111 + 10, 0xff); diff --git a/src/mainboard/gigabyte/ma785gm/resourcemap.c b/src/mainboard/gigabyte/ma785gm/resourcemap.c index 95d009ac1e..acdf645a54 100644 --- a/src/mainboard/gigabyte/ma785gm/resourcemap.c +++ b/src/mainboard/gigabyte/ma785gm/resourcemap.c @@ -121,7 +121,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/gigabyte/ma785gmt/resourcemap.c b/src/mainboard/gigabyte/ma785gmt/resourcemap.c index 95d009ac1e..acdf645a54 100644 --- a/src/mainboard/gigabyte/ma785gmt/resourcemap.c +++ b/src/mainboard/gigabyte/ma785gmt/resourcemap.c @@ -121,7 +121,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/gigabyte/ma78gm/resourcemap.c b/src/mainboard/gigabyte/ma78gm/resourcemap.c index 95d009ac1e..acdf645a54 100644 --- a/src/mainboard/gigabyte/ma78gm/resourcemap.c +++ b/src/mainboard/gigabyte/ma78gm/resourcemap.c @@ -121,7 +121,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/gizmosphere/gizmo2/mptable.c b/src/mainboard/gizmosphere/gizmo2/mptable.c index bc42bb08f3..42d8431a92 100644 --- a/src/mainboard/gizmosphere/gizmo2/mptable.c +++ b/src/mainboard/gizmosphere/gizmo2/mptable.c @@ -38,7 +38,7 @@ static void *smp_write_config_table(void *v) u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - /* Intialize the MP_Table */ + /* Initialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); diff --git a/src/mainboard/google/daisy/romstage.c b/src/mainboard/google/daisy/romstage.c index 33efdf7cba..24c9034ef7 100644 --- a/src/mainboard/google/daisy/romstage.c +++ b/src/mainboard/google/daisy/romstage.c @@ -88,7 +88,7 @@ static void setup_power(int is_resume) if (error) { printk(BIOS_CRIT, "%s: PMIC error: %#x\n", __func__, error); - die("Failed to intialize PMIC.\n"); + die("Failed to initialize PMIC.\n"); } } diff --git a/src/mainboard/google/peach_pit/romstage.c b/src/mainboard/google/peach_pit/romstage.c index 1268df2689..751b40b650 100644 --- a/src/mainboard/google/peach_pit/romstage.c +++ b/src/mainboard/google/peach_pit/romstage.c @@ -241,7 +241,7 @@ void main(void) exception_init(); if (power_init_failed) - die("Failed to intialize power.\n"); + die("Failed to initialize power.\n"); /* re-initialize PMIC I2C channel after (re-)setting system clocks */ i2c_init(PMIC_I2C_BUS, 1000000, 0x00); /* 1MHz */ diff --git a/src/mainboard/google/urara/urara_boardid.h b/src/mainboard/google/urara/urara_boardid.h index bc61085b5d..7c7c04584e 100644 --- a/src/mainboard/google/urara/urara_boardid.h +++ b/src/mainboard/google/urara/urara_boardid.h @@ -17,7 +17,7 @@ #define __MAINBOARD_GOOGLE_URARA_URARA_BOARDID_H__ /* - * List of URARA derivatives board ID defintions. They are stored in uint8_t + * List of URARA derivatives board ID definitions. They are stored in uint8_t * across the code, using #defines here not to imply any specific size. */ #define URARA_BOARD_ID_BUB 0 diff --git a/src/mainboard/iei/kino-780am2-fam10/resourcemap.c b/src/mainboard/iei/kino-780am2-fam10/resourcemap.c index 95d009ac1e..acdf645a54 100644 --- a/src/mainboard/iei/kino-780am2-fam10/resourcemap.c +++ b/src/mainboard/iei/kino-780am2-fam10/resourcemap.c @@ -121,7 +121,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/intel/glkrvp/variants/baseboard/gpio.c b/src/mainboard/intel/glkrvp/variants/baseboard/gpio.c index 806f1cbf25..a27047e82d 100644 --- a/src/mainboard/intel/glkrvp/variants/baseboard/gpio.c +++ b/src/mainboard/intel/glkrvp/variants/baseboard/gpio.c @@ -54,7 +54,7 @@ static const struct pad_config gpio_table[] = { PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_26, UP_20K, DEEP, NF2, HIZCRx1, DISPUPD),/* NFC Interrupt */ PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_27, 1, DEEP, NONE, IGNORE, DISPUPD),/* RF_KILL_WiFi/WiFi_Disable */ PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_28, 1, DEEP, UP_20K, TxLASTRxE, DISPUPD),/* RF_KILL_BT/BT_Disable */ - PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_29, 1, DEEP, UP_20K, HIZCRx0, DISPUPD),/* Codec Power Down: Ouput/ISH_GPIO_3*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_29, 1, DEEP, UP_20K, HIZCRx0, DISPUPD),/* Codec Power Down: Output/ISH_GPIO_3*/ PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_30, DN_20K, DEEP, NF1), /* ISH_GPIO_4 */ PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_31, DN_20K, DEEP, NF1), /* ISH_GPIO_5 */ PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_32, DN_20K, DEEP, NF1), /* ISH_GPIO_6 */ diff --git a/src/mainboard/jetway/nf81-t56n-lf/mainboard.c b/src/mainboard/jetway/nf81-t56n-lf/mainboard.c index 205b6559cb..567a58666d 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/mainboard.c +++ b/src/mainboard/jetway/nf81-t56n-lf/mainboard.c @@ -87,7 +87,7 @@ static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { */ /* * Persimmon has PCI slot INTA/B/C/D connected to PIRQE/F/G/H - * but because PCI INT_PIN swizzling isnt implemented to match + * but because PCI INT_PIN swizzling isn't implemented to match * the IDSEL (dev 3) of the slot, the table is adjusted for the * swizzle and INTA is connected to PIRQH so PINA/B/C/D on * off-chip devices should get mapped to PIRQH/E/F/G. diff --git a/src/mainboard/jetway/nf81-t56n-lf/mptable.c b/src/mainboard/jetway/nf81-t56n-lf/mptable.c index 92564c264a..a933f60d80 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/mptable.c +++ b/src/mainboard/jetway/nf81-t56n-lf/mptable.c @@ -42,7 +42,7 @@ static void *smp_write_config_table(void *v) u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - /* Intialize the MP_Table */ + /* Initialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); diff --git a/src/mainboard/jetway/pa78vm5/resourcemap.c b/src/mainboard/jetway/pa78vm5/resourcemap.c index d6c860892b..58b681f197 100644 --- a/src/mainboard/jetway/pa78vm5/resourcemap.c +++ b/src/mainboard/jetway/pa78vm5/resourcemap.c @@ -122,7 +122,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/msi/ms9652_fam10/resourcemap.c b/src/mainboard/msi/ms9652_fam10/resourcemap.c index 610baf3631..825f5ae664 100644 --- a/src/mainboard/msi/ms9652_fam10/resourcemap.c +++ b/src/mainboard/msi/ms9652_fam10/resourcemap.c @@ -122,7 +122,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/pcengines/apu1/mainboard.c b/src/mainboard/pcengines/apu1/mainboard.c index 290a0ed231..de949371fa 100644 --- a/src/mainboard/pcengines/apu1/mainboard.c +++ b/src/mainboard/pcengines/apu1/mainboard.c @@ -91,7 +91,7 @@ static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { */ /* * The PCI slot INTA/B/C/D connected to PIRQE/F/G/H - * but because of PCI INT_PIN swizzle isnt implemented to match + * but because of PCI INT_PIN swizzle isn't implemented to match * the IDSEL (dev 3) of the slot, the table is adjusted for the * swizzle and INTA is connected to PIRQH so PINA/B/C/D on * off-chip devices should get mapped to PIRQH/E/F/G. diff --git a/src/mainboard/pcengines/apu1/mptable.c b/src/mainboard/pcengines/apu1/mptable.c index b183d8de24..94a7d6fb70 100644 --- a/src/mainboard/pcengines/apu1/mptable.c +++ b/src/mainboard/pcengines/apu1/mptable.c @@ -39,7 +39,7 @@ static void *smp_write_config_table(void *v) u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - /* Intialize the MP_Table */ + /* Initialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); diff --git a/src/mainboard/pcengines/apu2/mptable.c b/src/mainboard/pcengines/apu2/mptable.c index dff5fbda14..772ee31734 100644 --- a/src/mainboard/pcengines/apu2/mptable.c +++ b/src/mainboard/pcengines/apu2/mptable.c @@ -24,7 +24,7 @@ static void *smp_write_config_table(void *v) struct mp_config_table *mc; int bus_isa; - /* Intialize the MP_Table */ + /* Initialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); diff --git a/src/mainboard/siemens/mc_tcu3/ptn3460.c b/src/mainboard/siemens/mc_tcu3/ptn3460.c index 347bc9ca37..89bc29399e 100644 --- a/src/mainboard/siemens/mc_tcu3/ptn3460.c +++ b/src/mainboard/siemens/mc_tcu3/ptn3460.c @@ -38,7 +38,7 @@ int ptn3460_init(char *hwi_block) return 1; } - status = i2c_init(PTN_I2C_CONTROLER); + status = i2c_init(PTN_I2C_CONTROLLER); if (status) return (PTN_BUS_ERROR | status); @@ -66,7 +66,7 @@ int ptn3460_init(char *hwi_block) /* Select this table to be emulated */ ptn_select_edid(6); /* Read PTN configuration data */ - status = i2c_read(PTN_I2C_CONTROLER, PTN_SLAVE_ADR, PTN_CONFIG_OFF, + status = i2c_read(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR, PTN_CONFIG_OFF, (u8*)&cfg, PTN_CONFIG_LEN); if (status) return (PTN_BUS_ERROR | status); @@ -94,7 +94,7 @@ int ptn3460_init(char *hwi_block) cfg.backlight_ctrl = 0; /* Enable backlight control */ /* Write back configuration data to PTN3460 */ - status = i2c_write(PTN_I2C_CONTROLER, PTN_SLAVE_ADR, PTN_CONFIG_OFF, + status = i2c_write(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR, PTN_CONFIG_OFF, (u8*)&cfg, PTN_CONFIG_LEN); if (status) return (PTN_BUS_ERROR | status); @@ -114,13 +114,13 @@ int ptn3460_read_edid(u8 edid_num, u8 *data) if (edid_num > PTN_MAX_EDID_NUM) return PTN_INVALID_EDID; /* First enable access to the desired EDID table */ - status = i2c_write(PTN_I2C_CONTROLER, PTN_SLAVE_ADR, PTN_CONFIG_OFF + 5, + status = i2c_write(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR, PTN_CONFIG_OFF + 5, &edid_num, 1); if (status) return (PTN_BUS_ERROR | status); /* Now we can simply read back EDID-data */ - status = i2c_read(PTN_I2C_CONTROLER, PTN_SLAVE_ADR, PTN_EDID_OFF, + status = i2c_read(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR, PTN_EDID_OFF, data, PTN_EDID_LEN); if (status) return (PTN_BUS_ERROR | status); @@ -140,13 +140,13 @@ int ptn3460_write_edid(u8 edid_num, u8 *data) if (edid_num > PTN_MAX_EDID_NUM) return PTN_INVALID_EDID; /* First enable access to the desired EDID table */ - status = i2c_write(PTN_I2C_CONTROLER, PTN_SLAVE_ADR, PTN_CONFIG_OFF + 5, + status = i2c_write(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR, PTN_CONFIG_OFF + 5, &edid_num, 1); if (status) return (PTN_BUS_ERROR | status); /* Now we can simply write EDID-data to ptn3460 */ - status = i2c_write(PTN_I2C_CONTROLER, PTN_SLAVE_ADR, PTN_EDID_OFF, + status = i2c_write(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR, PTN_EDID_OFF, data, PTN_EDID_LEN); if (status) return (PTN_BUS_ERROR | status); @@ -168,7 +168,7 @@ int ptn_select_edid (u8 edid_num) return PTN_INVALID_EDID; /* Enable emulation of the desired EDID table */ val = (edid_num << 1) | 1; - status = i2c_write(PTN_I2C_CONTROLER, PTN_SLAVE_ADR, PTN_CONFIG_OFF + 4, + status = i2c_write(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR, PTN_CONFIG_OFF + 4, &val, 1); if (status) return (PTN_BUS_ERROR | status); @@ -191,7 +191,7 @@ int ptn3460_flash_config(void) flash.cmd = 0x01; /* perform erase and flash cycle */ flash.magic = 0x7845; /* Magic number to protect flash operation */ flash.trigger = 0x56; /* This value starts flash operation */ - status = i2c_write(PTN_I2C_CONTROLER, PTN_SLAVE_ADR, PTN_FLASH_CFG_OFF, + status = i2c_write(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR, PTN_FLASH_CFG_OFF, (u8*)&flash, PTN_FLASH_CFG_LEN); if (status) { return (PTN_BUS_ERROR | status); diff --git a/src/mainboard/siemens/mc_tcu3/ptn3460.h b/src/mainboard/siemens/mc_tcu3/ptn3460.h index e662f6101e..5988c93922 100644 --- a/src/mainboard/siemens/mc_tcu3/ptn3460.h +++ b/src/mainboard/siemens/mc_tcu3/ptn3460.h @@ -21,7 +21,7 @@ #include "lcd_panel.h" #define PTN_SLAVE_ADR 0x20 -#define PTN_I2C_CONTROLER 0 +#define PTN_I2C_CONTROLLER 0 #define PTN_EDID_OFF 0x00 #define PTN_EDID_LEN 0x80 diff --git a/src/mainboard/supermicro/h8dmr_fam10/resourcemap.c b/src/mainboard/supermicro/h8dmr_fam10/resourcemap.c index b35d3e549a..d4cbc93f47 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/resourcemap.c +++ b/src/mainboard/supermicro/h8dmr_fam10/resourcemap.c @@ -122,7 +122,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/supermicro/h8qme_fam10/resourcemap.c b/src/mainboard/supermicro/h8qme_fam10/resourcemap.c index b35d3e549a..d4cbc93f47 100644 --- a/src/mainboard/supermicro/h8qme_fam10/resourcemap.c +++ b/src/mainboard/supermicro/h8qme_fam10/resourcemap.c @@ -122,7 +122,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/supermicro/h8scm_fam10/resourcemap.c b/src/mainboard/supermicro/h8scm_fam10/resourcemap.c index 95d009ac1e..acdf645a54 100644 --- a/src/mainboard/supermicro/h8scm_fam10/resourcemap.c +++ b/src/mainboard/supermicro/h8scm_fam10/resourcemap.c @@ -121,7 +121,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, diff --git a/src/mainboard/tyan/s2912_fam10/resourcemap.c b/src/mainboard/tyan/s2912_fam10/resourcemap.c index bc03d21248..10c97f59da 100644 --- a/src/mainboard/tyan/s2912_fam10/resourcemap.c +++ b/src/mainboard/tyan/s2912_fam10/resourcemap.c @@ -122,7 +122,7 @@ static void setup_mb_resource_map(void) * 0 = CPU writes may be posted * 1 = CPU writes must be non-posted * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that + * This field defines the upp address bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, |