summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/soc/intel/skylake/Kconfig298
-rw-r--r--src/soc/intel/skylake/Makefile.inc108
-rw-r--r--src/soc/intel/skylake/acpi.c337
-rw-r--r--src/soc/intel/skylake/acpi/adsp.asl73
-rw-r--r--src/soc/intel/skylake/acpi/cpu.asl4
-rw-r--r--src/soc/intel/skylake/acpi/ctdp.asl32
-rw-r--r--src/soc/intel/skylake/acpi/device_nvs.asl64
-rw-r--r--src/soc/intel/skylake/acpi/ehci.asl51
-rw-r--r--src/soc/intel/skylake/acpi/globalnvs.asl42
-rw-r--r--src/soc/intel/skylake/acpi/gpio.asl12
-rw-r--r--src/soc/intel/skylake/acpi/irqlinks.asl83
-rw-r--r--src/soc/intel/skylake/acpi/itss.asl96
-rw-r--r--src/soc/intel/skylake/acpi/lpc.asl54
-rw-r--r--src/soc/intel/skylake/acpi/pch.asl62
-rw-r--r--src/soc/intel/skylake/acpi/pci_irqs.asl172
-rw-r--r--src/soc/intel/skylake/acpi/pcie.asl107
-rw-r--r--src/soc/intel/skylake/acpi/pcie_port.asl28
-rw-r--r--src/soc/intel/skylake/acpi/platform.asl6
-rw-r--r--src/soc/intel/skylake/acpi/sata.asl25
-rw-r--r--src/soc/intel/skylake/acpi/serialio.asl609
-rw-r--r--src/soc/intel/skylake/acpi/sleepstates.asl3
-rw-r--r--src/soc/intel/skylake/acpi/smbus.asl5
-rw-r--r--src/soc/intel/skylake/acpi/systemagent.asl318
-rw-r--r--src/soc/intel/skylake/acpi/xhci.asl298
-rw-r--r--src/soc/intel/skylake/adsp.c167
-rw-r--r--src/soc/intel/skylake/bootblock/Makefile.inc2
-rw-r--r--src/soc/intel/skylake/bootblock/cpu.c96
-rw-r--r--src/soc/intel/skylake/bootblock/pch.c47
-rw-r--r--src/soc/intel/skylake/bootblock/systemagent.c5
-rw-r--r--src/soc/intel/skylake/bootblock/timestamp.inc6
-rw-r--r--src/soc/intel/skylake/chip.c65
-rw-r--r--src/soc/intel/skylake/chip.h172
-rw-r--r--src/soc/intel/skylake/cpu.c273
-rw-r--r--src/soc/intel/skylake/cpu_info.c6
-rw-r--r--src/soc/intel/skylake/ehci.c103
-rw-r--r--src/soc/intel/skylake/elog.c36
-rw-r--r--src/soc/intel/skylake/finalize.c124
-rw-r--r--src/soc/intel/skylake/flash_controller.c615
-rw-r--r--src/soc/intel/skylake/gpio.c406
-rw-r--r--src/soc/intel/skylake/hda.c181
-rw-r--r--src/soc/intel/skylake/igd.c488
-rw-r--r--src/soc/intel/skylake/include/soc/acpi.h15
-rw-r--r--src/soc/intel/skylake/include/soc/adsp.h56
-rw-r--r--src/soc/intel/skylake/include/soc/chipset_fsp_util.h41
-rw-r--r--src/soc/intel/skylake/include/soc/cpu.h23
-rw-r--r--src/soc/intel/skylake/include/soc/device_nvs.h33
-rw-r--r--src/soc/intel/skylake/include/soc/ehci.h32
-rw-r--r--src/soc/intel/skylake/include/soc/gpio.h510
-rw-r--r--src/soc/intel/skylake/include/soc/iobp.h28
-rw-r--r--src/soc/intel/skylake/include/soc/iomap.h14
-rw-r--r--src/soc/intel/skylake/include/soc/irq.h (renamed from src/soc/intel/skylake/acpi/hda.asl)28
-rw-r--r--src/soc/intel/skylake/include/soc/lpc.h56
-rw-r--r--src/soc/intel/skylake/include/soc/me.h507
-rw-r--r--src/soc/intel/skylake/include/soc/msr.h19
-rw-r--r--src/soc/intel/skylake/include/soc/nvs.h14
-rw-r--r--src/soc/intel/skylake/include/soc/pch.h38
-rw-r--r--src/soc/intel/skylake/include/soc/pci_devs.h131
-rw-r--r--src/soc/intel/skylake/include/soc/pcr.h104
-rw-r--r--src/soc/intel/skylake/include/soc/pei_data.h25
-rw-r--r--src/soc/intel/skylake/include/soc/pei_wrapper.h11
-rw-r--r--src/soc/intel/skylake/include/soc/pm.h28
-rw-r--r--src/soc/intel/skylake/include/soc/pmc.h71
-rw-r--r--src/soc/intel/skylake/include/soc/ramstage.h24
-rw-r--r--src/soc/intel/skylake/include/soc/rcba.h178
-rw-r--r--src/soc/intel/skylake/include/soc/romstage.h35
-rw-r--r--src/soc/intel/skylake/include/soc/sata.h89
-rw-r--r--src/soc/intel/skylake/include/soc/serialio.h109
-rw-r--r--src/soc/intel/skylake/include/soc/smbus.h9
-rw-r--r--src/soc/intel/skylake/include/soc/smm.h46
-rw-r--r--src/soc/intel/skylake/include/soc/spi.h122
-rw-r--r--src/soc/intel/skylake/include/soc/systemagent.h37
-rw-r--r--src/soc/intel/skylake/include/soc/xhci.h17
-rw-r--r--src/soc/intel/skylake/iobp.c152
-rw-r--r--src/soc/intel/skylake/lpc.c466
-rw-r--r--src/soc/intel/skylake/me.c1085
-rw-r--r--src/soc/intel/skylake/me_status.c321
-rw-r--r--src/soc/intel/skylake/memmap.c81
-rw-r--r--src/soc/intel/skylake/microcode/Makefile.inc17
-rw-r--r--src/soc/intel/skylake/microcode/microcode_blob.c7
-rw-r--r--src/soc/intel/skylake/microcode/microcode_blob.h (renamed from src/soc/intel/skylake/include/soc/reset.h)14
-rw-r--r--src/soc/intel/skylake/minihd.c128
-rw-r--r--src/soc/intel/skylake/monotonic_timer.c9
-rw-r--r--src/soc/intel/skylake/pch.c160
-rw-r--r--src/soc/intel/skylake/pcie.c616
-rw-r--r--src/soc/intel/skylake/pcr.c162
-rw-r--r--src/soc/intel/skylake/pei_data.c11
-rw-r--r--src/soc/intel/skylake/pmc.c254
-rw-r--r--src/soc/intel/skylake/pmutil.c116
-rw-r--r--src/soc/intel/skylake/ramstage.c85
-rw-r--r--src/soc/intel/skylake/refcode.c146
-rw-r--r--src/soc/intel/skylake/reset.c49
-rw-r--r--src/soc/intel/skylake/romstage/Makefile.inc6
-rw-r--r--src/soc/intel/skylake/romstage/cache_as_ram.inc341
-rw-r--r--src/soc/intel/skylake/romstage/cpu.c7
-rw-r--r--src/soc/intel/skylake/romstage/pch.c174
-rw-r--r--src/soc/intel/skylake/romstage/power_state.c29
-rw-r--r--src/soc/intel/skylake/romstage/raminit.c138
-rw-r--r--src/soc/intel/skylake/romstage/report_platform.c81
-rw-r--r--src/soc/intel/skylake/romstage/romstage.c620
-rw-r--r--src/soc/intel/skylake/romstage/smbus.c3
-rw-r--r--src/soc/intel/skylake/romstage/spi.c61
-rw-r--r--src/soc/intel/skylake/romstage/stack.c124
-rw-r--r--src/soc/intel/skylake/romstage/systemagent.c3
-rw-r--r--src/soc/intel/skylake/romstage/uart.c78
-rw-r--r--src/soc/intel/skylake/sata.c264
-rw-r--r--src/soc/intel/skylake/serialio.c318
-rw-r--r--src/soc/intel/skylake/smbus.c10
-rw-r--r--src/soc/intel/skylake/smbus_common.c13
-rw-r--r--src/soc/intel/skylake/smi.c8
-rw-r--r--src/soc/intel/skylake/smihandler.c313
-rw-r--r--src/soc/intel/skylake/smmrelocate.c138
-rw-r--r--src/soc/intel/skylake/spi.c680
-rw-r--r--src/soc/intel/skylake/stage_cache.c35
-rw-r--r--src/soc/intel/skylake/systemagent.c93
-rw-r--r--src/soc/intel/skylake/tsc_freq.c3
-rw-r--r--src/soc/intel/skylake/uart.c76
-rw-r--r--src/soc/intel/skylake/usbdebug.c51
-rw-r--r--src/soc/intel/skylake/xhci.c202
118 files changed, 5614 insertions, 10263 deletions
diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
index 0864e57cc9..24fd961951 100644
--- a/src/soc/intel/skylake/Kconfig
+++ b/src/soc/intel/skylake/Kconfig
@@ -8,36 +8,41 @@ if SOC_INTEL_SKYLAKE
config CPU_SPECIFIC_OPTIONS
def_bool y
select ARCH_BOOTBLOCK_X86_32
- select ARCH_VERSTAGE_X86_32
- select ARCH_ROMSTAGE_X86_32
select ARCH_RAMSTAGE_X86_32
- select ALT_CBFS_LOAD_PAYLOAD
+ select ARCH_ROMSTAGE_X86_32
+ select ARCH_VERSTAGE_X86_32
select ALWAYS_LOAD_OPROM
select BACKUP_DEFAULT_SMM_REGION
- select CACHE_MRC_BIN
select CACHE_MRC_SETTINGS
- select MRC_SETTINGS_PROTECT
select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM
select CACHE_ROM
select CAR_MIGRATION
select COLLECT_TIMESTAMPS
select CPU_INTEL_FIRMWARE_INTERFACE_TABLE
- select SUPPORT_CPU_UCODE_IN_CBFS
+ select CPU_MICROCODE_IN_CBFS
+ select HAS_PRECBMEM_TIMESTAMP_REGION
+ select HAVE_HARD_RESET
select HAVE_MONOTONIC_TIMER
select HAVE_SMI_HANDLER
- select HAVE_HARD_RESET
- select HAVE_USBDEBUG
select IOAPIC
select MMCONF_SUPPORT
select MMCONF_SUPPORT_DEFAULT
- select RELOCATABLE_MODULES
- select RELOCATABLE_RAMSTAGE
- select REG_SCRIPT
select PARALLEL_MP
select PCIEXP_ASPM
select PCIEXP_COMMON_CLOCK
select PCIEXP_CLK_PM
- select PCIEXP_L1_SUB_STATE
+ # External devices not working on glados
+ #select PCIEXP_L1_SUB_STATE
+ select PLATFORM_USES_FSP1_1
+ select REG_SCRIPT
+ select RELOCATABLE_MODULES
+ select RELOCATABLE_RAMSTAGE
+ select SOC_INTEL_COMMON
+ select SOC_INTEL_COMMON_FSP_RAM_INIT
+ select SOC_INTEL_COMMON_FSP_ROMSTAGE
+ select SOC_INTEL_COMMON_RESET
+ select SOC_INTEL_COMMON_STACK
+ select SOC_INTEL_COMMON_STAGE_CACHE
select SMM_MODULES
select SMM_TSEG
select SMP
@@ -47,8 +52,7 @@ config CPU_SPECIFIC_OPTIONS
select TSC_CONSTANT_RATE
select TSC_SYNC_MFENCE
select UDELAY_TSC
- select PER_DEVICE_ACPI_TABLES
- select SOC_INTEL_COMMON
+ select USE_GENERIC_FSP_CAR_INC
config BOOTBLOCK_CPU_INIT
string
@@ -58,94 +62,17 @@ config BOOTBLOCK_NORTHBRIDGE_INIT
string
default "soc/intel/skylake/bootblock/systemagent.c"
-config BOOTBLOCK_SOUTHBRIDGE_INIT
+config BOOTBLOCK_RESETS
string
- default "soc/intel/skylake/bootblock/pch.c"
+ default "soc/intel/common/reset.c"
-
-config MMCONF_BASE_ADDRESS
- hex
- default 0xf0000000
-
-config SERIAL_CPU_INIT
- bool
- default n
-
-config SMM_TSEG_SIZE
- hex
- default 0x800000
-
-config IED_REGION_SIZE
- hex
- default 0x400000
-
-config SMM_RESERVED_SIZE
- hex
- default 0x100000
-
-config VGA_BIOS_ID
+config BOOTBLOCK_SOUTHBRIDGE_INIT
string
- default "8086,0406"
-
-config CACHE_MRC_SIZE_KB
- int
- default 512
-
-config DCACHE_RAM_BASE
- hex
- default 0xff7c0000
-
-config DCACHE_RAM_SIZE
- hex
- default 0x10000
- help
- The size of the cache-as-ram region required during bootblock
- and/or romstage. Note DCACHE_RAM_SIZE and DCACHE_RAM_MRC_VAR_SIZE
- must add up to a power of 2.
-
-config DCACHE_RAM_MRC_VAR_SIZE
- hex
- default 0x30000
- help
- The amount of cache-as-ram region required by the reference code.
-
-config DCACHE_RAM_ROMSTAGE_STACK_SIZE
- hex
- default 0x2000
- help
- The amount of anticipated stack usage from the data cache
- during pre-ram rom stage execution.
-
-config HAVE_MRC
- bool "Add a Memory Reference Code binary"
- help
- Select this option to add a Memory Reference Code binary to
- the resulting coreboot image.
-
- Note: Without this binary coreboot will not work
-
-if HAVE_MRC
-
-config MRC_FILE
- string "Intel Memory Reference Code path and filename"
- depends on HAVE_MRC
- default "mrc.bin"
- help
- The filename of the file to use as Memory Reference Code binary.
-
-config MRC_BIN_ADDRESS
- hex
- default 0xfffa0000
-
-config CACHE_MRC_SETTINGS
- bool "Save cached MRC settings"
- default y
-
-endif # HAVE_MRC
+ default "soc/intel/skylake/bootblock/pch.c"
config CBFS_SIZE
hex "Size of CBFS filesystem in ROM"
- default 0x100000
+ default 0x200000
help
The firmware image has to store more than just coreboot, including:
- a firmware descriptor
@@ -154,72 +81,25 @@ config CBFS_SIZE
This option allows to limit the size of the CBFS portion in the
firmware image.
-config PRE_GRAPHICS_DELAY
- int "Graphics initialization delay in ms"
- default 0
- help
- On some systems, coreboot boots so fast that connected monitors
- (mostly TVs) won't be able to wake up fast enough to talk to the
- VBIOS. On those systems we need to wait for a bit before executing
- the VBIOS.
-
-config RESET_ON_INVALID_RAMSTAGE_CACHE
- bool "Reset the system on S3 wake when ramstage cache invalid."
- default n
- depends on RELOCATABLE_RAMSTAGE
- help
- The romstage code caches the loaded ramstage program in SMM space.
- On S3 wake the romstage will copy over a fresh ramstage that was
- cached in the SMM space. This option determines the action to take
- when the ramstage cache is invalid. If selected the system will
- reset otherwise the ramstage will be reloaded from cbfs.
-
-config INTEL_PCH_UART_CONSOLE
- bool "Use Serial IO UART for console"
- default n
- select HAVE_UART_MEMORY_MAPPED
- select CONSOLE_SERIAL8250MEM
- depends on !CONFIG_DRIVERS_OXFORD_OXPCIE
-
-config INTEL_PCH_UART_CONSOLE_NUMBER
- hex "Serial IO UART number to use for console"
- default "0x0"
- depends on INTEL_PCH_UART_CONSOLE
-
-config TTYS0_BASE
- hex
- default 0xd6000000
- depends on INTEL_PCH_UART_CONSOLE
-
-config EHCI_BAR
- hex
- default 0xd8000000
+config CPU_ADDR_BITS
+ int
+ default 36
-config EHCI_DEBUG_OFFSET
- hex
- default 0xa0
+config DCACHE_RAM_BASE
+ hex "Base address of cache-as-RAM"
+ default 0xfef00000
-config SERIRQ_CONTINUOUS_MODE
- bool
- default y
- help
- If you set this option to y, the serial IRQ machine will be
- operated in continuous mode.
-config HAVE_ME_BIN
- bool "Add Intel Management Engine firmware"
- default y
+config DCACHE_RAM_SIZE
+ hex "Length in bytes of cache-as-RAM"
+ default 0x4000
help
- The Intel processor in the selected system requires a special firmware
- for an integrated controller called Management Engine (ME). The ME
- firmware might be provided in coreboot's 3rdparty/blobs repository. If
- not and if you don't have the firmware elsewhere, you can still
- build coreboot without it. In this case however, you'll have to make
- sure that you don't overwrite your ME firmware on your flash ROM.
+ The size of the cache-as-ram region required during bootblock
+ and/or romstage.
-config ME_BIN_PATH
- string "Path to management engine firmware"
- depends on HAVE_ME_BIN
- default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin"
+config EXTRA_MICROCODE_INCLUDE_PATH
+ string "Include path for extra microcode patches."
+ help
+ The path to any extra microcode patches from other sources.
config HAVE_IFD_BIN
bool "Use Intel Firmware Descriptor from existing binary"
@@ -242,6 +122,30 @@ config BUILD_WITH_FAKE_IFD
[1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html
+config HAVE_ME_BIN
+ bool "Add Intel Management Engine firmware"
+ default y
+ help
+ The Intel processor in the selected system requires a special firmware
+ for an integrated controller called Management Engine (ME). The ME
+ firmware might be provided in coreboot's 3rdparty/blobs repository. If
+ not and if you don't have the firmware elsewhere, you can still
+ build coreboot without it. In this case however, you'll have to make
+ sure that you don't overwrite your ME firmware on your flash ROM.
+
+config HEAP_SIZE
+ hex
+ default 0x80000
+
+config IED_REGION_SIZE
+ hex
+ default 0x400000
+
+config IFD_BIN_PATH
+ string "Path to intel firmware descriptor"
+ depends on !BUILD_WITH_FAKE_IFD
+ default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin"
+
config IFD_BIOS_SECTION
depends on BUILD_WITH_FAKE_IFD
string
@@ -257,22 +161,72 @@ config IFD_PLATFORM_SECTION
string
default ""
-config IFD_BIN_PATH
- string "Path to intel firmware descriptor"
- depends on !BUILD_WITH_FAKE_IFD
- default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin"
+config INTEL_PCH_UART_CONSOLE
+ bool "Use Serial IO UART for console"
+ default n
+ select HAVE_UART_MEMORY_MAPPED
+ select CONSOLE_SERIAL8250MEM
+ depends on !CONFIG_DRIVERS_OXFORD_OXPCIE
-config LOCK_MANAGEMENT_ENGINE
- bool "Lock Management Engine section"
+config INTEL_PCH_UART_CONSOLE_NUMBER
+ hex "Serial IO UART number to use for console"
+ default "0x0"
+ depends on INTEL_PCH_UART_CONSOLE
+
+config ME_BIN_PATH
+ string "Path to management engine firmware"
+ depends on HAVE_ME_BIN
+ default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin"
+
+config MICROCODE_INCLUDE_PATH
+ string
+ default "src/soc/intel/skylake/microcode"
+
+config MMCONF_BASE_ADDRESS
+ hex "MMIO Base Address"
+ default 0xe0000000
+
+config MONOTONIC_TIMER_MSR
+ def_bool y
+ select HAVE_MONOTONIC_TIMER
+ help
+ Provide a monotonic timer using the 24MHz MSR counter.
+
+config PRE_GRAPHICS_DELAY
+ int "Graphics initialization delay in ms"
+ default 0
+ help
+ On some systems, coreboot boots so fast that connected monitors
+ (mostly TVs) won't be able to wake up fast enough to talk to the
+ VBIOS. On those systems we need to wait for a bit before executing
+ the VBIOS.
+
+config SERIAL_CPU_INIT
+ bool
default n
+
+config SERIRQ_CONTINUOUS_MODE
+ bool
+ default y
help
- The Intel Management Engine supports preventing write accesses
- from the host to the Management Engine section in the firmware
- descriptor. If the ME section is locked, it can only be overwritten
- with an external SPI flash programmer. You will want this if you
- want to increase security of your ROM image once you are sure
- that the ME firmware is no longer going to change.
-
- If unsure, say N.
+ If you set this option to y, the serial IRQ machine will be
+ operated in continuous mode.
+
+config SMM_RESERVED_SIZE
+ hex
+ default 0x200000
+
+config SMM_TSEG_SIZE
+ hex
+ default 0x800000
+
+config TTYS0_BASE
+ hex
+ default 0xfe034000
+ depends on INTEL_PCH_UART_CONSOLE
+
+config VGA_BIOS_ID
+ string
+ default "8086,0406"
endif
diff --git a/src/soc/intel/skylake/Makefile.inc b/src/soc/intel/skylake/Makefile.inc
index dafceb7e22..af299c3c74 100644
--- a/src/soc/intel/skylake/Makefile.inc
+++ b/src/soc/intel/skylake/Makefile.inc
@@ -3,81 +3,78 @@ ifeq ($(CONFIG_SOC_INTEL_SKYLAKE),y)
subdirs-y += bootblock
subdirs-y += microcode
subdirs-y += romstage
+subdirs-y += ../common
+subdirs-y += ../../../cpu/intel/microcode
+subdirs-y += ../../../cpu/intel/turbo
subdirs-y += ../../../cpu/x86/lapic
subdirs-y += ../../../cpu/x86/mtrr
subdirs-y += ../../../cpu/x86/smm
subdirs-y += ../../../cpu/x86/tsc
-subdirs-y += ../../../cpu/intel/microcode
-subdirs-y += ../../../cpu/intel/turbo
-ramstage-y += acpi.c
-ramstage-y += adsp.c
+romstage-y += gpio.c
+romstage-y += memmap.c
+romstage-y += pch.c
+romstage-y += pcr.c
+romstage-y += pei_data.c
+romstage-y += pmutil.c
+romstage-y += smbus_common.c
+romstage-y += tsc_freq.c
+
+ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c
ramstage-y += chip.c
ramstage-y += cpu.c
ramstage-y += cpu_info.c
-smm-y += cpu_info.c
-ramstage-$(CONFIG_ELOG) += elog.c
+ramstage-y += elog.c
ramstage-y += finalize.c
+ramstage-y += flash_controller.c
ramstage-y += gpio.c
-romstage-y += gpio.c
-smm-y += gpio.c
-ramstage-y += hda.c
ramstage-y += igd.c
-ramstage-y += iobp.c
-romstage-y += iobp.c
ramstage-y += lpc.c
-ramstage-y += me.c
-ramstage-y += me_status.c
-romstage-y += me_status.c
ramstage-y += memmap.c
-romstage-y += memmap.c
-ramstage-y += minihd.c
ramstage-y += monotonic_timer.c
-smm-y += monotonic_timer.c
ramstage-y += pch.c
-romstage-y += pch.c
ramstage-y += pcie.c
+ramstage-y += pcr.c
ramstage-y += pei_data.c
-romstage-y += pei_data.c
+ramstage-y += pmc.c
ramstage-y += pmutil.c
-romstage-y += pmutil.c
-smm-y += pmutil.c
ramstage-y += ramstage.c
-ramstage-$(CONFIG_HAVE_REFCODE_BLOB) += refcode.c
-ramstage-y += reset.c
-romstage-y += reset.c
-ramstage-y += sata.c
-ramstage-y += serialio.c
ramstage-y += smbus.c
ramstage-y += smbus_common.c
-romstage-y += smbus_common.c
ramstage-y += smi.c
-smm-y += smihandler.c
ramstage-y += smmrelocate.c
-ramstage-y += spi.c
-smm-$(CONFIG_SPI_FLASH_SMM) += spi.c
-ramstage-y += stage_cache.c
-romstage-y += stage_cache.c
ramstage-y += systemagent.c
ramstage-y += tsc_freq.c
-romstage-y += tsc_freq.c
-smm-y += tsc_freq.c
-ramstage-y += ehci.c
+ramstage-y += uart.c
ramstage-y += xhci.c
-smm-y += xhci.c
-ifeq ($(CONFIG_USBDEBUG),y)
-ramstage-y += usbdebug.c
-romstage-y += usbdebug.c
-smm-y += usbdebug.c
-endif
+smm-y += cpu_info.c
+smm-y += gpio.c
+smm-y += monotonic_timer.c
+smm-y += pcr.c
+smm-y += pch.c
+smm-y += pmutil.c
+smm-y += smihandler.c
+smm-$(CONFIG_SPI_FLASH_SMM) += flash_controller.c
+smm-y += tsc_freq.c
+
+CPPFLAGS_common += -I$(src)/arch/x86/include/
+CPPFLAGS_common += -I$(src)/soc/intel/skylake
+CPPFLAGS_common += -I$(src)/soc/intel/skylake/include
-CPPFLAGS_common += -Isrc/soc/intel/broadwell/include
+CPPFLAGS_common += -I3rdparty/blobs/mainboard/$(CONFIG_MAINBOARD_DIR)
+
+CPPFLAGS_common += -I$(src)/drivers/intel/fsp1_1
+CPPFLAGS_common += -I$(src)/vendorcode/intel/fsp/fsp1_1
+CPPFLAGS_common += -I$(src)/vendorcode/intel/edk2/uefi_2.4
+CPPFLAGS_common += -I$(src)/vendorcode/intel/edk2/uefi_2.4/MdePkg/Include
+CPPFLAGS_common += -I$(src)/vendorcode/intel/edk2/uefi_2.4/MdePkg/Include/Ia32
+CPPFLAGS_common += -I$(CONFIG_FSP_INCLUDE_PATH)
# Run an intermediate step when producing coreboot.rom
# that adds additional components to the final firmware
# image outside of CBFS
-INTERMEDIATE := broadwell_add_me
+INTERMEDIATE := pch_add_me
ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y)
IFD_BIN_PATH := $(objgenerated)/ifdfake.bin
@@ -88,7 +85,7 @@ else
IFD_BIN_PATH := $(CONFIG_IFD_BIN_PATH)
endif
-broadwell_add_me: $(obj)/coreboot.pre $(IFDTOOL) $(IFDFAKE)
+pch_add_me: $(obj)/coreboot.pre $(IFDTOOL) $(IFDFAKE)
ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y)
printf "\n** WARNING **\n"
printf "Coreboot will be built with a fake Intel Firmware Descriptor (IFD).\n"
@@ -106,29 +103,8 @@ ifeq ($(CONFIG_HAVE_ME_BIN),y)
-i ME:$(CONFIG_ME_BIN_PATH) \
$(obj)/coreboot.pre
mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
-ifeq ($(CONFIG_LOCK_MANAGEMENT_ENGINE),y)
- printf " IFDTOOL Locking Management Engine\n"
- $(objutil)/ifdtool/ifdtool -l $(obj)/coreboot.pre
- mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
-else
- printf " IFDTOOL Unlocking Management Engine\n"
- $(objutil)/ifdtool/ifdtool -u $(obj)/coreboot.pre
- mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
endif
-endif
-
-PHONY += broadwell_add_me
-
-# If an MRC file is an ELF file determine the entry address and first loadable
-# section offset in the file. Subtract the offset from the entry address to
-# determine the final location.
-mrcelfoffset = $(shell $(READELF_x86_32) -S -W $(CONFIG_MRC_FILE) | sed -e 's/\[ /[0/' | awk '$$3 ~ /PROGBITS/ { print "0x"$$5; exit }' )
-mrcelfentry = $(shell $(READELF_x86_32) -h -W $(CONFIG_MRC_FILE) | grep 'Entry point address' | awk '{print $$NF }')
-# Add memory reference code blob.
-cbfs-files-$(CONFIG_HAVE_MRC) += mrc.bin
-mrc.bin-file := $(call strip_quotes,$(CONFIG_MRC_FILE))
-mrc.bin-position := $(if $(findstring elf,$(CONFIG_MRC_FILE)),$(shell printf "0x%x" $$(( $(mrcelfentry) - $(mrcelfoffset) )) ),$(CONFIG_MRC_BIN_ADDRESS))
-mrc.bin-type := mrc
+PHONY += pch_add_me
endif
diff --git a/src/soc/intel/skylake/acpi.c b/src/soc/intel/skylake/acpi.c
index f038e87e5a..1b193c7308 100644
--- a/src/soc/intel/skylake/acpi.c
+++ b/src/soc/intel/skylake/acpi.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/acpi.h>
@@ -23,9 +24,10 @@
#include <arch/io.h>
#include <arch/smp/mpspec.h>
#include <cbmem.h>
+#include <chip.h>
#include <console/console.h>
+#include <cpu/cpu.h>
#include <cpu/x86/smm.h>
-#include <console/console.h>
#include <types.h>
#include <string.h>
#include <arch/cpu.h>
@@ -41,36 +43,33 @@
#include <soc/msr.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
-#include <soc/intel/broadwell/chip.h>
/*
- * List of supported C-states in this processor. Only the ULT parts support C8,
- * C9, and C10.
+ * List of suported C-states in this processor.
*/
enum {
- C_STATE_C0, /* 0 */
- C_STATE_C1, /* 1 */
- C_STATE_C1E, /* 2 */
- C_STATE_C3, /* 3 */
- C_STATE_C6_SHORT_LAT, /* 4 */
- C_STATE_C6_LONG_LAT, /* 5 */
- C_STATE_C7_SHORT_LAT, /* 6 */
- C_STATE_C7_LONG_LAT, /* 7 */
- C_STATE_C7S_SHORT_LAT, /* 8 */
- C_STATE_C7S_LONG_LAT, /* 9 */
- C_STATE_C8, /* 10 */
- C_STATE_C9, /* 11 */
- C_STATE_C10, /* 12 */
+ C_STATE_C0, /* 0 */
+ C_STATE_C1, /* 1 */
+ C_STATE_C1E, /* 2 */
+ C_STATE_C3, /* 3 */
+ C_STATE_C6_SHORT_LAT, /* 4 */
+ C_STATE_C6_LONG_LAT, /* 5 */
+ C_STATE_C7_SHORT_LAT, /* 6 */
+ C_STATE_C7_LONG_LAT, /* 7 */
+ C_STATE_C7S_SHORT_LAT, /* 8 */
+ C_STATE_C7S_LONG_LAT, /* 9 */
+ C_STATE_C8, /* 10 */
+ C_STATE_C9, /* 11 */
+ C_STATE_C10, /* 12 */
NUM_C_STATES
};
-
-#define MWAIT_RES(state, sub_state) \
- { \
- .addrl = (((state) << 4) | (sub_state)), \
- .space_id = ACPI_ADDRESS_SPACE_FIXED, \
- .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL, \
- .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT, \
- .access_size = ACPI_FFIXEDHW_FLAG_HW_COORD, \
+#define MWAIT_RES(state, sub_state) \
+ { \
+ .addrl = (((state) << 4) | (sub_state)), \
+ .space_id = ACPI_ADDRESS_SPACE_FIXED, \
+ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL, \
+ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT, \
+ .access_size = ACPI_FFIXEDHW_FLAG_HW_COORD, \
}
static acpi_cstate_t cstate_map[NUM_C_STATES] = {
@@ -78,75 +77,78 @@ static acpi_cstate_t cstate_map[NUM_C_STATES] = {
[C_STATE_C1] = {
.latency = 0,
.power = 1000,
- .resource = MWAIT_RES(0,0),
+ .resource = MWAIT_RES(0, 0),
},
[C_STATE_C1E] = {
.latency = 0,
.power = 1000,
- .resource = MWAIT_RES(0,1),
+ .resource = MWAIT_RES(0, 1),
},
[C_STATE_C3] = {
.latency = C_STATE_LATENCY_FROM_LAT_REG(0),
- .power = 900,
+ .power = 500,
.resource = MWAIT_RES(1, 0),
},
[C_STATE_C6_SHORT_LAT] = {
.latency = C_STATE_LATENCY_FROM_LAT_REG(1),
- .power = 800,
+ .power = 350,
.resource = MWAIT_RES(2, 0),
},
[C_STATE_C6_LONG_LAT] = {
.latency = C_STATE_LATENCY_FROM_LAT_REG(2),
- .power = 800,
+ .power = 350,
.resource = MWAIT_RES(2, 1),
},
[C_STATE_C7_SHORT_LAT] = {
.latency = C_STATE_LATENCY_FROM_LAT_REG(1),
- .power = 700,
+ .power = 200,
.resource = MWAIT_RES(3, 0),
},
[C_STATE_C7_LONG_LAT] = {
.latency = C_STATE_LATENCY_FROM_LAT_REG(2),
- .power = 700,
+ .power = 200,
.resource = MWAIT_RES(3, 1),
},
[C_STATE_C7S_SHORT_LAT] = {
.latency = C_STATE_LATENCY_FROM_LAT_REG(1),
- .power = 700,
+ .power = 200,
.resource = MWAIT_RES(3, 2),
},
[C_STATE_C7S_LONG_LAT] = {
.latency = C_STATE_LATENCY_FROM_LAT_REG(2),
- .power = 700,
+ .power = 200,
.resource = MWAIT_RES(3, 3),
},
[C_STATE_C8] = {
.latency = C_STATE_LATENCY_FROM_LAT_REG(3),
- .power = 600,
+ .power = 200,
.resource = MWAIT_RES(4, 0),
},
[C_STATE_C9] = {
.latency = C_STATE_LATENCY_FROM_LAT_REG(4),
- .power = 500,
+ .power = 200,
.resource = MWAIT_RES(5, 0),
},
[C_STATE_C10] = {
.latency = C_STATE_LATENCY_FROM_LAT_REG(5),
- .power = 400,
+ .power = 200,
.resource = MWAIT_RES(6, 0),
},
};
-static int cstate_set_s0ix[3] = {
+static int cstate_set_s0ix[] = {
C_STATE_C1E,
C_STATE_C7S_LONG_LAT,
C_STATE_C10
};
-static int cstate_set_non_s0ix[3] = {
+static int cstate_set_non_s0ix[] = {
C_STATE_C1E,
C_STATE_C3,
- C_STATE_C7S_LONG_LAT
+ C_STATE_C7S_LONG_LAT,
+ C_STATE_C8,
+ C_STATE_C9,
+ C_STATE_C10
};
static int get_cores_per_package(void)
@@ -173,15 +175,15 @@ void acpi_init_gnvs(global_nvs_t *gnvs)
/* CPU core count */
gnvs->pcnt = dev_count_cpu();
-#if CONFIG_CONSOLE_CBMEM
+#if IS_ENABLED(CONFIG_CONSOLE_CBMEM)
/* Update the mem console pointer. */
gnvs->cbmc = (u32)cbmem_find(CBMEM_ID_CONSOLE);
#endif
-#if CONFIG_CHROMEOS
+#if IS_ENABLED(CONFIG_CHROMEOS)
/* Initialize Verified Boot data */
chromeos_init_vboot(&(gnvs->chromeos));
-#if CONFIG_EC_GOOGLE_CHROMEEC
+#if IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC)
gnvs->chromeos.vbt2 = google_ec_running_ro() ?
ACTIVE_ECFW_RO : ACTIVE_ECFW_RW;
#endif
@@ -189,37 +191,6 @@ void acpi_init_gnvs(global_nvs_t *gnvs)
#endif
}
-void acpi_create_intel_hpet(acpi_hpet_t * hpet)
-{
- acpi_header_t *header = &(hpet->header);
- acpi_addr_t *addr = &(hpet->addr);
-
- memset((void *) hpet, 0, sizeof(acpi_hpet_t));
-
- /* fill out header fields */
- memcpy(header->signature, "HPET", 4);
- memcpy(header->oem_id, OEM_ID, 6);
- memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
- memcpy(header->asl_compiler_id, ASLC, 4);
-
- header->length = sizeof(acpi_hpet_t);
- header->revision = 1;
-
- /* fill out HPET address */
- addr->space_id = 0; /* Memory */
- addr->bit_width = 64;
- addr->bit_offset = 0;
- addr->addrl = (unsigned long long)HPET_BASE_ADDRESS & 0xffffffff;
- addr->addrh = (unsigned long long)HPET_BASE_ADDRESS >> 32;
-
- hpet->id = 0x8086a201; /* Intel */
- hpet->number = 0x00;
- hpet->min_tick = 0x0080;
-
- header->checksum =
- acpi_checksum((void *) hpet, sizeof(acpi_hpet_t));
-}
-
unsigned long acpi_fill_mcfg(unsigned long current)
{
current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *)current,
@@ -336,82 +307,25 @@ void acpi_fill_in_fadt(acpi_fadt_t *fadt)
fadt->x_gpe1_blk.addrh = 0x0;
}
-static acpi_tstate_t tss_table_fine[] = {
- { 100, 1000, 0, 0x00, 0 },
- { 94, 940, 0, 0x1f, 0 },
- { 88, 880, 0, 0x1e, 0 },
- { 82, 820, 0, 0x1d, 0 },
- { 75, 760, 0, 0x1c, 0 },
- { 69, 700, 0, 0x1b, 0 },
- { 63, 640, 0, 0x1a, 0 },
- { 57, 580, 0, 0x19, 0 },
- { 50, 520, 0, 0x18, 0 },
- { 44, 460, 0, 0x17, 0 },
- { 38, 400, 0, 0x16, 0 },
- { 32, 340, 0, 0x15, 0 },
- { 25, 280, 0, 0x14, 0 },
- { 19, 220, 0, 0x13, 0 },
- { 13, 160, 0, 0x12, 0 },
-};
-
-static acpi_tstate_t tss_table_coarse[] = {
- { 100, 1000, 0, 0x00, 0 },
- { 88, 875, 0, 0x1f, 0 },
- { 75, 750, 0, 0x1e, 0 },
- { 63, 625, 0, 0x1d, 0 },
- { 50, 500, 0, 0x1c, 0 },
- { 38, 375, 0, 0x1b, 0 },
- { 25, 250, 0, 0x1a, 0 },
- { 13, 125, 0, 0x19, 0 },
-};
-
-static int generate_T_state_entries(int core, int cores_per_package)
+static void generate_c_state_entries(int s0ix_enable, int max_cstate)
{
- int len;
-
- /* Indicate SW_ALL coordination for T-states */
- len = acpigen_write_TSD_package(core, cores_per_package, SW_ALL);
-
- /* Indicate FFixedHW so OS will use MSR */
- len += acpigen_write_empty_PTC();
-
- /* Set a T-state limit that can be modified in NVS */
- len += acpigen_write_TPC("\\TLVL");
-
- /*
- * CPUID.(EAX=6):EAX[5] indicates support
- * for extended throttle levels.
- */
- if (cpuid_eax(6) & (1 << 5))
- len += acpigen_write_TSS_package(
- ARRAY_SIZE(tss_table_fine), tss_table_fine);
- else
- len += acpigen_write_TSS_package(
- ARRAY_SIZE(tss_table_coarse), tss_table_coarse);
-
- return len;
-}
-static int generate_C_state_entries(void)
-{
- device_t dev = SA_DEV_ROOT;
- config_t *config = dev->chip_info;
- acpi_cstate_t map[3];
+ acpi_cstate_t map[max_cstate];
int *set;
int i;
- if (config->s0ix_enable)
+ if (s0ix_enable)
set = cstate_set_s0ix;
else
set = cstate_set_non_s0ix;
- for (i = 0; i < 3; i++) {
+ for (i = 0; i < max_cstate; i++) {
memcpy(&map[i], &cstate_map[set[i]], sizeof(acpi_cstate_t));
map[i].ctype = i + 1;
}
/* Generate C-state tables */
- return acpigen_write_CST_package(map, ARRAY_SIZE(map));
+ acpigen_write_CST_package(map, ARRAY_SIZE(map));
}
static int calculate_power(int tdp, int p1_ratio, int ratio)
@@ -435,7 +349,7 @@ static int calculate_power(int tdp, int p1_ratio, int ratio)
return (int)power;
}
-static void generate_P_state_entries(int core, int cores_per_package)
+static void generate_p_state_entries(int core, int cores_per_package)
{
int ratio_min, ratio_max, ratio_turbo, ratio_step;
int coord_type, power_max, power_unit, num_entries;
@@ -484,10 +398,10 @@ static void generate_P_state_entries(int core, int cores_per_package)
/* Determine ratio points */
ratio_step = PSS_RATIO_STEP;
- num_entries = (ratio_max - ratio_min) / ratio_step;
- while (num_entries > PSS_MAX_ENTRIES-1) {
- ratio_step <<= 1;
- num_entries >>= 1;
+ num_entries = ((ratio_max - ratio_min) / ratio_step) + 1;
+ if (num_entries > PSS_MAX_ENTRIES) {
+ ratio_step += 1;
+ num_entries = ((ratio_max - ratio_min) / ratio_step) + 1;
}
/* P[T] is Turbo state if enabled */
@@ -500,12 +414,12 @@ static void generate_P_state_entries(int core, int cores_per_package)
/* Add entry for Turbo ratio */
acpigen_write_PSS_package(
- clock_max + 1, /*MHz*/
- power_max, /*mW*/
- PSS_LATENCY_TRANSITION, /*lat1*/
- PSS_LATENCY_BUSMASTER, /*lat2*/
- ratio_turbo << 8, /*control*/
- ratio_turbo << 8); /*status*/
+ clock_max + 1, /* MHz */
+ power_max, /* mW */
+ PSS_LATENCY_TRANSITION, /* lat1 */
+ PSS_LATENCY_BUSMASTER, /* lat2 */
+ ratio_turbo << 8, /* control */
+ ratio_turbo << 8); /* status */
} else {
/* _PSS package count without Turbo */
acpigen_write_package(num_entries + 1);
@@ -513,12 +427,12 @@ static void generate_P_state_entries(int core, int cores_per_package)
/* First regular entry is max non-turbo ratio */
acpigen_write_PSS_package(
- clock_max, /*MHz*/
- power_max, /*mW*/
- PSS_LATENCY_TRANSITION, /*lat1*/
- PSS_LATENCY_BUSMASTER, /*lat2*/
- ratio_max << 8, /*control*/
- ratio_max << 8); /*status*/
+ clock_max, /* MHz */
+ power_max, /* mW */
+ PSS_LATENCY_TRANSITION, /* lat1 */
+ PSS_LATENCY_BUSMASTER, /* lat2 */
+ ratio_max << 8, /* control */
+ ratio_max << 8); /* status */
/* Generate the remaining entries */
for (ratio = ratio_min + ((num_entries - 1) * ratio_step);
@@ -529,50 +443,55 @@ static void generate_P_state_entries(int core, int cores_per_package)
clock = ratio * CPU_BCLK;
acpigen_write_PSS_package(
- clock, /*MHz*/
- power, /*mW*/
- PSS_LATENCY_TRANSITION, /*lat1*/
- PSS_LATENCY_BUSMASTER, /*lat2*/
- ratio << 8, /*control*/
- ratio << 8); /*status*/
+ clock, /* MHz */
+ power, /* mW */
+ PSS_LATENCY_TRANSITION, /* lat1 */
+ PSS_LATENCY_BUSMASTER, /* lat2 */
+ ratio << 8, /* control */
+ ratio << 8); /* status */
}
/* Fix package length */
acpigen_pop_len();
}
-void generate_cpu_entries(void)
+void generate_cpu_entries(device_t device)
{
- int coreID, cpuID, pcontrol_blk = ACPI_BASE_ADDRESS, plen = 6;
+ int core_id, cpu_id, pcontrol_blk = ACPI_BASE_ADDRESS, plen = 6;
int totalcores = dev_count_cpu();
int cores_per_package = get_cores_per_package();
int numcpus = totalcores/cores_per_package;
+ device_t dev = SA_DEV_ROOT;
+ config_t *config = dev->chip_info;
+ int is_s0ix_enable = config->s0ix_enable;
+ int max_c_state;
+
+ if (is_s0ix_enable)
+ max_c_state = ARRAY_SIZE(cstate_set_s0ix);
+ else
+ max_c_state = ARRAY_SIZE(cstate_set_non_s0ix);
printk(BIOS_DEBUG, "Found %d CPU(s) with %d core(s) each.\n",
numcpus, cores_per_package);
- for (cpuID=1; cpuID <=numcpus; cpuID++) {
- for (coreID=1; coreID<=cores_per_package; coreID++) {
- if (coreID>1) {
+ for (cpu_id = 0; cpu_id < numcpus; cpu_id++) {
+ for (core_id = 0; core_id < cores_per_package; core_id++) {
+ if (core_id > 0) {
pcontrol_blk = 0;
plen = 0;
}
/* Generate processor \_PR.CPUx */
acpigen_write_processor(
- (cpuID-1)*cores_per_package+coreID-1,
+ cpu_id*cores_per_package+core_id,
pcontrol_blk, plen);
-
- /* Generate P-state tables */
- generate_P_state_entries(
- coreID-1, cores_per_package);
-
/* Generate C-state tables */
- generate_C_state_entries();
+ generate_c_state_entries(is_s0ix_enable,
+ max_c_state);
- /* Generate T-state tables */
- generate_T_state_entries(
- cpuID-1, cores_per_package);
+ /* Generate P-state tables */
+ generate_p_state_entries(core_id,
+ cores_per_package);
acpigen_pop_len();
}
@@ -600,3 +519,71 @@ unsigned long acpi_madt_irq_overrides(unsigned long current)
return current;
}
+
+#define ALIGN_CURRENT current = (ALIGN(current, 16))
+
+unsigned long southcluster_write_acpi_tables(device_t device,
+ unsigned long current,
+ struct acpi_rsdp *rsdp)
+{
+ acpi_header_t *ssdt2;
+
+ current = acpi_write_hpet(device, current, rsdp);
+ ALIGN_CURRENT;
+
+#if CONFIG_GOP_SUPPORT
+ igd_opregion_t *opregion;
+
+ printk(BIOS_DEBUG, "ACPI: * IGD OpRegion\n");
+ opregion = (igd_opregion_t *)current;
+ init_igd_opregion(opregion);
+ current += sizeof(igd_opregion_t);
+ ALIGN_CURRENT;
+#endif
+
+ ssdt2 = (acpi_header_t *)current;
+ memset(ssdt2, 0, sizeof(acpi_header_t));
+ acpi_create_serialio_ssdt(ssdt2);
+ if (ssdt2->length) {
+ current += ssdt2->length;
+ acpi_add_table(rsdp, ssdt2);
+ printk(BIOS_DEBUG, "ACPI: * SSDT2 @ %p Length %x\n",ssdt2,
+ ssdt2->length);
+ ALIGN_CURRENT;
+ } else {
+ ssdt2 = NULL;
+ printk(BIOS_DEBUG, "ACPI: * SSDT2 not generated.\n");
+ }
+
+ printk(BIOS_DEBUG, "current = %lx\n", current);
+
+ return current;
+}
+
+void southcluster_inject_dsdt(device_t device)
+{
+ global_nvs_t *gnvs;
+
+ gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS);
+ if (!gnvs) {
+ gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof (*gnvs));
+ if (gnvs)
+ memset(gnvs, 0, sizeof(*gnvs));
+ }
+
+ if (gnvs) {
+ acpi_create_gnvs(gnvs);
+ acpi_save_gnvs((unsigned long)gnvs);
+ /* And tell SMI about it */
+ smm_setup_structures(gnvs, NULL, NULL);
+
+ /* Add it to DSDT. */
+ acpigen_write_scope("\\");
+ acpigen_write_name_dword("NVSA", (u32) gnvs);
+ acpigen_pop_len();
+ }
+}
+
+__attribute__((weak)) void acpi_create_serialio_ssdt(acpi_header_t *ssdt)
+{
+}
diff --git a/src/soc/intel/skylake/acpi/adsp.asl b/src/soc/intel/skylake/acpi/adsp.asl
deleted file mode 100644
index cb10d9a9ad..0000000000
--- a/src/soc/intel/skylake/acpi/adsp.asl
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-Device (ADSP)
-{
- Method (_HID, 0, Serialized)
- {
- If (\ISWP ()) {
- // WildcatPoint
- Return ("INT3438")
- }
-
- // LynxPoint-LP
- Return ("INT33C8")
- }
- Name (_UID, 1)
- Name (_DDN, "Intel Smart Sound Technology")
-
- Name (RBUF, ResourceTemplate ()
- {
- Memory32Fixed (ReadWrite, 0x00000000, 0x00100000, BAR0)
- Memory32Fixed (ReadWrite, 0x00000000, 0x00001000, BAR1)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, , , ) {3}
- })
-
- Method (_CRS, 0, NotSerialized)
- {
- // Update BAR address and length if set in NVS
- If (LNotEqual (\S8B0, Zero)) {
- CreateDwordField (^RBUF, ^BAR0._BAS, B8A0)
- CreateDwordField (^RBUF, ^BAR1._BAS, B8A1)
- Store (\S8B0, B8A0)
- Store (\S8B1, B8A1)
- }
-
- Return (RBUF)
- }
-
- Method (_STA, 0, NotSerialized)
- {
- If (LEqual (\S8EN, 0)) {
- Return (0x0)
- } Else {
- Return (0xF)
- }
- }
-
- Device (I2S0)
- {
- Name (_ADR, 0)
- }
-
- Device (I2S1)
- {
- Name (_ADR, 1)
- }
-}
diff --git a/src/soc/intel/skylake/acpi/cpu.asl b/src/soc/intel/skylake/acpi/cpu.asl
index 2921ceae5e..5856033862 100644
--- a/src/soc/intel/skylake/acpi/cpu.asl
+++ b/src/soc/intel/skylake/acpi/cpu.asl
@@ -2,7 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
@@ -14,7 +14,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
/* These devices are created at runtime */
diff --git a/src/soc/intel/skylake/acpi/ctdp.asl b/src/soc/intel/skylake/acpi/ctdp.asl
index a2a8fb4d2c..1668b4cfaa 100644
--- a/src/soc/intel/skylake/acpi/ctdp.asl
+++ b/src/soc/intel/skylake/acpi/ctdp.asl
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
Scope (\_SB.PCI0.MCHC)
@@ -30,40 +31,43 @@ Scope (\_SB.PCI0.MCHC)
Add (MCH_BASE_ADDRESS, 0x5000), 0x1000)
Field (MCHB, DWordAcc, Lock, Preserve)
{
- Offset (0x930), /* PACKAGE_POWER_SKU */
+ Offset (0x930), /* PACKAGE_POWER_SKU */
CTDN, 15, /* CTDP Nominal PL1 */
- Offset (0x938), /* PACKAGE_POWER_SKU_UNIT */
+ Offset (0x938), /* PACKAGE_POWER_SKU_UNIT */
PUNI, 4, /* Power Units */
, 4,
EUNI, 5, /* Energy Units */
, 3,
TUNI, 4, /* Time Units */
- Offset (0x958), /* PLATFORM_INFO */
- , 40,
+ Offset (0x958), /* PLATFORM_INFO */
+ , 32,
+ LPMS, 1, /* LPM Support */
+ CTNL, 2, /* Config TDP Number level */
+ , 5,
LFM_, 8, /* Maximum Efficiency Ratio (LFM) */
- Offset (0x9a0), /* TURBO_POWER_LIMIT1 */
+ Offset (0x9a0), /* TURBO_POWER_LIMIT1 */
PL1V, 15, /* Power Limit 1 Value */
PL1E, 1, /* Power Limit 1 Enable */
PL1C, 1, /* Power Limit 1 Clamp */
PL1T, 7, /* Power Limit 1 Time */
- Offset (0x9a4), /* TURBO_POWER_LIMIT2 */
+ Offset (0x9a4), /* TURBO_POWER_LIMIT2 */
PL2V, 15, /* Power Limit 2 Value */
PL2E, 1, /* Power Limit 2 Enable */
PL2C, 1, /* Power Limit 2 Clamp */
PL2T, 7, /* Power Limit 2 Time */
- Offset (0xf3c), /* CONFIG_TDP_NOMINAL */
+ Offset (0xf3c), /* CONFIG_TDP_NOMINAL */
TARN, 8, /* CTDP Nominal Turbo Activation Ratio */
- Offset (0xf40), /* CONFIG_TDP_LEVEL1 */
+ Offset (0xf40), /* CONFIG_TDP_LEVEL1 */
CTDD, 15, /* CTDP Down PL1 */
, 1,
TARD, 8, /* CTDP Down Turbo Activation Ratio */
- Offset (0xf48), /* MSR_CONFIG_TDP_LEVEL2 */
+ Offset (0xf48), /* MSR_CONFIG_TDP_LEVEL2 */
CTDU, 15, /* CTDP Up PL1 */
, 1,
TARU, 8, /* CTDP Up Turbo Activation Ratio */
- Offset (0xf50), /* CONFIG_TDP_CONTROL */
+ Offset (0xf50), /* CONFIG_TDP_CONTROL */
CTCS, 2, /* CTDP Select */
- Offset (0xf54), /* TURBO_ACTIVATION_RATIO */
+ Offset (0xf54), /* TURBO_ACTIVATION_RATIO */
TARS, 8, /* Turbo Activation Ratio Select */
}
@@ -85,7 +89,7 @@ Scope (\_SB.PCI0.MCHC)
While (LLess (Local0, Local1)) {
/* Store _PSS entry Control value to Local2 */
ShiftRight (DeRefOf (Index (DeRefOf (Index
- (\_PR.CP00._PSS, Local0)), 4)), 8, Local2)
+ (\_PR.CP00._PSS, Local0)), 4)), 8, Local2)
If (LEqual (Local2, Arg0)) {
Return (Subtract (Local0, 1))
}
@@ -98,8 +102,6 @@ Scope (\_SB.PCI0.MCHC)
/* Calculate PL2 based on chip type */
Method (CPL2, 1, NotSerialized)
{
- /* Haswell ULT PL2 = 25W */
- /* FIXME: update for broadwell */
Return (Multiply (25, 8))
}
diff --git a/src/soc/intel/skylake/acpi/device_nvs.asl b/src/soc/intel/skylake/acpi/device_nvs.asl
index 1d2aa78edb..e84d25ae9b 100644
--- a/src/soc/intel/skylake/acpi/device_nvs.asl
+++ b/src/soc/intel/skylake/acpi/device_nvs.asl
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,41 +15,46 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
/* Device Enabled in ACPI Mode */
-S0EN, 8, // DMA Enable
-S1EN, 8, // I2C0 Enable
-S2EN, 8, // I2C1 Enable
-S3EN, 8, // SPI0 Enable
-S4EN, 8, // SPI1 Enable
-S5EN, 8, // UART0 Enable
-S6EN, 8, // UART1 Enable
-S7EN, 8, // SDIO Enable
-S8EN, 8, // ADSP Enable
+S0EN, 8, // I2C0 Enable
+S1EN, 8, // I2C1 Enable
+S2EN, 8, // I2C2 Enable
+S3EN, 8, // I2C3 Enable
+S4EN, 8, // I2C4 Enable
+S5EN, 8, // I2C5 Enable
+S6EN, 8, // SPI0 Enable
+S7EN, 8, // SPI1 Enable
+S8EN, 8, // UART0 Enable
+S9EN, 8, // UART1 Enable
+SAEN, 8, // UART2 Enable
/* BAR 0 */
-
-S0B0, 32, // DMA BAR0
-S1B0, 32, // I2C0 BAR0
-S2B0, 32, // I2C1 BAR0
-S3B0, 32, // SPI0 BAR0
-S4B0, 32, // SPI1 BAR0
-S5B0, 32, // UART0 BAR0
-S6B0, 32, // UART1 BAR0
-S7B0, 32, // SDIO BAR0
-S8B0, 32, // ADSP BAR0
+S0B0, 32, // I2C0 BAR0
+S1B0, 32, // I2C1 BAR0
+S2B0, 32, // I2C2 BAR0
+S3B0, 32, // I2C3 BAR0
+S4B0, 32, // I2C4 BAR0
+S5B0, 32, // I2C5 BAR0
+S6B0, 32, // SPI0 BAR0
+S7B0, 32, // SPI1 BAR0
+S8B0, 32, // UART0 BAR0
+S9B0, 32, // UART1 BAR0
+SAB0, 32, // UART2 BAR0
/* BAR 1 */
+S0B1, 32, // I2C0 BAR1
+S1B1, 32, // I2C1 BAR1
+S2B1, 32, // I2C2 BAR1
+S3B1, 32, // I2C3 BAR1
+S4B1, 32, // I2C4 BAR1
+S5B1, 32, // I2C5 BAR1
+S6B1, 32, // SPI0 BAR1
+S7B1, 32, // SPI1 BAR1
+S8B1, 32, // UART0 BAR1
+S9B1, 32, // UART1 BAR1
+SAB1, 32, // UART2 BAR1
-S0B1, 32, // DMA BAR1
-S1B1, 32, // I2C0 BAR1
-S2B1, 32, // I2C1 BAR1
-S3B1, 32, // SPI0 BAR1
-S4B1, 32, // SPI1 BAR1
-S5B1, 32, // UART0 BAR1
-S6B1, 32, // UART1 BAR1
-S7B1, 32, // SDIO BAR1
-S8B1, 32, // ADSP BAR1
diff --git a/src/soc/intel/skylake/acpi/ehci.asl b/src/soc/intel/skylake/acpi/ehci.asl
deleted file mode 100644
index a2e704fccf..0000000000
--- a/src/soc/intel/skylake/acpi/ehci.asl
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-// EHCI Controller 0:1d.0
-
-Device (EHCI)
-{
- Name(_ADR, 0x001d0000)
- Name (_PRW, Package(){ 0x6d, 3 })
-
- // Leave USB ports on for to allow Wake from USB
-
- Method(_S3D,0) // Highest D State in S3 State
- {
- Return (2)
- }
-
- Method(_S4D,0) // Highest D State in S4 State
- {
- Return (2)
- }
-
- Device (HUB7)
- {
- Name (_ADR, 0x00000000)
-
- // How many are there?
- Device (PRT1) { Name (_ADR, 1) } // USB Port 0
- Device (PRT2) { Name (_ADR, 2) } // USB Port 1
- Device (PRT3) { Name (_ADR, 3) } // USB Port 2
- Device (PRT4) { Name (_ADR, 4) } // USB Port 3
- Device (PRT5) { Name (_ADR, 5) } // USB Port 4
- Device (PRT6) { Name (_ADR, 6) } // USB Port 5
- }
-}
diff --git a/src/soc/intel/skylake/acpi/globalnvs.asl b/src/soc/intel/skylake/acpi/globalnvs.asl
index 223d21a676..3df40cd946 100644
--- a/src/soc/intel/skylake/acpi/globalnvs.asl
+++ b/src/soc/intel/skylake/acpi/globalnvs.asl
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
/* Global Variables */
@@ -29,8 +30,7 @@ Name (\PICM, 0) // IOAPIC/8259
* we have to fix it up in coreboot's ACPI creation phase.
*/
-External(NVSA)
-OperationRegion (GNVS, SystemMemory, NVSA, 0x2000)
+OperationRegion (GNVS, SystemMemory, 0xC0DEBABE, 0x2000)
Field (GNVS, ByteAcc, NoLock, Preserve)
{
/* Miscellaneous */
@@ -62,6 +62,18 @@ Field (GNVS, ByteAcc, NoLock, Preserve)
CBMC, 32, // 0x1c - 0x1f - Coreboot Memory Console
PM1I, 64, // 0x20 - 0x27 - PM1 wake status bit
GPEI, 64, // 0x28 - 0x2f - GPE wake status bit
+ RPA1, 32, // 0x30 - 0x33 - Root port address 1
+ RPA2, 32, // 0x34 - 0x37 - Root port address 2
+ RPA3, 32, // 0x38 - 0x3b - Root port address 3
+ RPA4, 32, // 0x3c - 0x3f - Root port address 4
+ RPA5, 32, // 0x40 - 0x43 - Root port address 5
+ RPA6, 32, // 0x44 - 0x47 - Root port address 6
+ RPA7, 32, // 0x48 - 0x4b - Root port address 7
+ RPA8, 32, // 0x4c - 0x4f - Root port address 8
+ RPA9, 32, // 0x50 - 0x53 - Root port address 9
+ RPAA, 32, // 0x54 - 0x57 - Root port address 10
+ RPAB, 32, // 0x58 - 0x5b - Root port address 11
+ RPAC, 32, // 0x5c - 0x5f - Root port address 12
/* ChromeOS specific */
Offset (0x100),
@@ -72,18 +84,6 @@ Field (GNVS, ByteAcc, NoLock, Preserve)
#include "device_nvs.asl"
}
-/* Set flag to enable USB charging in S3 */
-Method (S3UE)
-{
- Store (One, \S3U0)
-}
-
-/* Set flag to disable USB charging in S3 */
-Method (S3UD)
-{
- Store (Zero, \S3U0)
-}
-
/* Set flag to enable USB charging in S5 */
Method (S5UE)
{
@@ -95,15 +95,3 @@ Method (S5UD)
{
Store (Zero, \S5U0)
}
-
-/* Set flag to enable 3G module in S3 */
-Method (S3GE)
-{
- Store (One, \S33G)
-}
-
-/* Set flag to disable 3G module in S3 */
-Method (S3GD)
-{
- Store (Zero, \S33G)
-}
diff --git a/src/soc/intel/skylake/acpi/gpio.asl b/src/soc/intel/skylake/acpi/gpio.asl
index c6d8753975..69ee721393 100644
--- a/src/soc/intel/skylake/acpi/gpio.asl
+++ b/src/soc/intel/skylake/acpi/gpio.asl
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
Device (GPIO)
@@ -22,13 +23,8 @@ Device (GPIO)
// GPIO Controller
Method (_HID)
{
- If (\ISWP ()) {
- // WildcatPoint
- Return ("INT3437")
- }
-
- // LynxPoint-LP
- Return ("INT33C7")
+ //Sunrisepoint-LP PCH
+ Return ("INT344B")
}
Name (_UID, 1)
diff --git a/src/soc/intel/skylake/acpi/irqlinks.asl b/src/soc/intel/skylake/acpi/irqlinks.asl
index ba550e2a46..1f6e62352c 100644
--- a/src/soc/intel/skylake/acpi/irqlinks.asl
+++ b/src/soc/intel/skylake/acpi/irqlinks.asl
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
Device (LNKA)
@@ -26,14 +27,14 @@ Device (LNKA)
// Disable method
Method (_DIS, 0, Serialized)
{
- Store (0x80, PRTA)
+ Or (\_SB.PARC, 0x80, \_SB.PARC)
}
// Possible Resource Settings for this Link
Name (_PRS, ResourceTemplate()
{
IRQ (Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
+ { 3, 4, 5, 6, 10, 12, 14, 15 }
})
// Current Resource Settings for this link
@@ -49,7 +50,7 @@ Device (LNKA)
Store (Zero, IRQ0)
// Set the bit from PRTA
- ShiftLeft (1, And (PRTA, 0x0f), IRQ0)
+ ShiftLeft (1, And (\_SB.PARC, 0x0f), IRQ0)
Return (RTLA)
}
@@ -63,13 +64,13 @@ Device (LNKA)
FindSetRightBit (IRQ0, Local0)
Decrement(Local0)
- Store (Local0, PRTA)
+ Store (Local0, \_SB.PARC)
}
// Status
Method (_STA, 0, Serialized)
{
- If(And (PRTA, 0x80)) {
+ If(And (\_SB.PARC, 0x80)) {
Return (0x9)
} Else {
Return (0xb)
@@ -85,14 +86,14 @@ Device (LNKB)
// Disable method
Method (_DIS, 0, Serialized)
{
- Store (0x80, PRTB)
+ Or (\_SB.PBRC, 0x80, \_SB.PBRC)
}
// Possible Resource Settings for this Link
Name (_PRS, ResourceTemplate()
{
IRQ (Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
+ { 3, 4, 5, 6, 10, 12, 14, 15 }
})
// Current Resource Settings for this link
@@ -108,7 +109,7 @@ Device (LNKB)
Store (Zero, IRQ0)
// Set the bit from PRTB
- ShiftLeft (1, And (PRTB, 0x0f), IRQ0)
+ ShiftLeft (1, And (\_SB.PBRC, 0x0f), IRQ0)
Return (RTLB)
}
@@ -122,13 +123,13 @@ Device (LNKB)
FindSetRightBit (IRQ0, Local0)
Decrement(Local0)
- Store (Local0, PRTB)
+ Store (Local0, \_SB.PBRC)
}
// Status
Method (_STA, 0, Serialized)
{
- If(And (PRTB, 0x80)) {
+ If(And (\_SB.PBRC, 0x80)) {
Return (0x9)
} Else {
Return (0xb)
@@ -144,14 +145,14 @@ Device (LNKC)
// Disable method
Method (_DIS, 0, Serialized)
{
- Store (0x80, PRTC)
+ Or (\_SB.PCRC, 0x80, \_SB.PCRC)
}
// Possible Resource Settings for this Link
Name (_PRS, ResourceTemplate()
{
IRQ (Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
+ { 3, 4, 5, 6, 10, 12, 14, 15 }
})
// Current Resource Settings for this link
@@ -167,7 +168,7 @@ Device (LNKC)
Store (Zero, IRQ0)
// Set the bit from PRTC
- ShiftLeft (1, And (PRTC, 0x0f), IRQ0)
+ ShiftLeft (1, And (\_SB.PCRC, 0x0f), IRQ0)
Return (RTLC)
}
@@ -181,13 +182,13 @@ Device (LNKC)
FindSetRightBit (IRQ0, Local0)
Decrement(Local0)
- Store (Local0, PRTC)
+ Store (Local0, \_SB.PCRC)
}
// Status
Method (_STA, 0, Serialized)
{
- If(And (PRTC, 0x80)) {
+ If(And (\_SB.PCRC, 0x80)) {
Return (0x9)
} Else {
Return (0xb)
@@ -203,14 +204,14 @@ Device (LNKD)
// Disable method
Method (_DIS, 0, Serialized)
{
- Store (0x80, PRTD)
+ Or (\_SB.PDRC, 0x80, \_SB.PDRC)
}
// Possible Resource Settings for this Link
Name (_PRS, ResourceTemplate()
{
IRQ (Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
+ { 3, 4, 5, 6, 10, 12, 14, 15 }
})
// Current Resource Settings for this link
@@ -226,7 +227,7 @@ Device (LNKD)
Store (Zero, IRQ0)
// Set the bit from PRTD
- ShiftLeft (1, And (PRTD, 0x0f), IRQ0)
+ ShiftLeft (1, And (\_SB.PDRC, 0x0f), IRQ0)
Return (RTLD)
}
@@ -240,13 +241,13 @@ Device (LNKD)
FindSetRightBit (IRQ0, Local0)
Decrement(Local0)
- Store (Local0, PRTD)
+ Store (Local0, \_SB.PDRC)
}
// Status
Method (_STA, 0, Serialized)
{
- If(And (PRTD, 0x80)) {
+ If(And (\_SB.PDRC, 0x80)) {
Return (0x9)
} Else {
Return (0xb)
@@ -262,14 +263,14 @@ Device (LNKE)
// Disable method
Method (_DIS, 0, Serialized)
{
- Store (0x80, PRTE)
+ Or (\_SB.PERC, 0x80, \_SB.PERC)
}
// Possible Resource Settings for this Link
Name (_PRS, ResourceTemplate()
{
IRQ (Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
+ { 3, 4, 5, 6, 10, 12, 14, 15 }
})
// Current Resource Settings for this link
@@ -285,7 +286,7 @@ Device (LNKE)
Store (Zero, IRQ0)
// Set the bit from PRTE
- ShiftLeft (1, And (PRTE, 0x0f), IRQ0)
+ ShiftLeft (1, And (\_SB.PERC, 0x0f), IRQ0)
Return (RTLE)
}
@@ -299,13 +300,13 @@ Device (LNKE)
FindSetRightBit (IRQ0, Local0)
Decrement(Local0)
- Store (Local0, PRTE)
+ Store (Local0, \_SB.PERC)
}
// Status
Method (_STA, 0, Serialized)
{
- If(And (PRTE, 0x80)) {
+ If(And (\_SB.PERC, 0x80)) {
Return (0x9)
} Else {
Return (0xb)
@@ -321,14 +322,14 @@ Device (LNKF)
// Disable method
Method (_DIS, 0, Serialized)
{
- Store (0x80, PRTF)
+ Or (\_SB.PFRC, 0x80, \_SB.PFRC)
}
// Possible Resource Settings for this Link
Name (_PRS, ResourceTemplate()
{
IRQ (Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
+ { 3, 4, 5, 6, 10, 12, 14, 15 }
})
// Current Resource Settings for this link
@@ -344,7 +345,7 @@ Device (LNKF)
Store (Zero, IRQ0)
// Set the bit from PRTF
- ShiftLeft (1, And (PRTF, 0x0f), IRQ0)
+ ShiftLeft (1, And (\_SB.PFRC, 0x0f), IRQ0)
Return (RTLF)
}
@@ -358,13 +359,13 @@ Device (LNKF)
FindSetRightBit (IRQ0, Local0)
Decrement(Local0)
- Store (Local0, PRTF)
+ Store (Local0, \_SB.PFRC)
}
// Status
Method (_STA, 0, Serialized)
{
- If(And (PRTF, 0x80)) {
+ If(And (\_SB.PFRC, 0x80)) {
Return (0x9)
} Else {
Return (0xb)
@@ -380,14 +381,14 @@ Device (LNKG)
// Disable method
Method (_DIS, 0, Serialized)
{
- Store (0x80, PRTG)
+ Or (\_SB.PGRC, 0x80, \_SB.PGRC)
}
// Possible Resource Settings for this Link
Name (_PRS, ResourceTemplate()
{
IRQ (Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
+ { 3, 4, 5, 6, 10, 12, 14, 15 }
})
// Current Resource Settings for this link
@@ -403,7 +404,7 @@ Device (LNKG)
Store (Zero, IRQ0)
// Set the bit from PRTG
- ShiftLeft (1, And (PRTG, 0x0f), IRQ0)
+ ShiftLeft (1, And (\_SB.PGRC, 0x0f), IRQ0)
Return (RTLG)
}
@@ -417,13 +418,13 @@ Device (LNKG)
FindSetRightBit (IRQ0, Local0)
Decrement(Local0)
- Store (Local0, PRTG)
+ Store (Local0, \_SB.PGRC)
}
// Status
Method (_STA, 0, Serialized)
{
- If(And (PRTG, 0x80)) {
+ If(And (\_SB.PGRC, 0x80)) {
Return (0x9)
} Else {
Return (0xb)
@@ -439,14 +440,14 @@ Device (LNKH)
// Disable method
Method (_DIS, 0, Serialized)
{
- Store (0x80, PRTH)
+ Or (\_SB.PHRC, 0x80, \_SB.PHRC)
}
// Possible Resource Settings for this Link
Name (_PRS, ResourceTemplate()
{
IRQ (Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
+ { 3, 4, 5, 6, 10, 12, 14, 15 }
})
// Current Resource Settings for this link
@@ -462,7 +463,7 @@ Device (LNKH)
Store (Zero, IRQ0)
// Set the bit from PRTH
- ShiftLeft (1, And (PRTH, 0x0f), IRQ0)
+ ShiftLeft (1, And (\_SB.PHRC, 0x0f), IRQ0)
Return (RTLH)
}
@@ -476,13 +477,13 @@ Device (LNKH)
FindSetRightBit (IRQ0, Local0)
Decrement(Local0)
- Store (Local0, PRTH)
+ Store (Local0, \_SB.PHRC)
}
// Status
Method (_STA, 0, Serialized)
{
- If(And (PRTH, 0x80)) {
+ If(And (\_SB.PHRC, 0x80)) {
Return (0x9)
} Else {
Return (0xb)
diff --git a/src/soc/intel/skylake/acpi/itss.asl b/src/soc/intel/skylake/acpi/itss.asl
new file mode 100644
index 0000000000..8ba9513abd
--- /dev/null
+++ b/src/soc/intel/skylake/acpi/itss.asl
@@ -0,0 +1,96 @@
+/*
+ * This file is part of the coreboot project.
+ * Copyright (C) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* ITSS */
+/* Define the needed ITSS registers used by ASL on Interrupt */
+
+Scope (\_SB)
+{
+ OperationRegion (ITSS, SystemMemory, 0xfdc43100, 0x8)
+ Field (ITSS, ByteAcc, NoLock, Preserve)
+ {
+ PARC, 8,
+ PBRC, 8,
+ PCRC, 8,
+ PDRC, 8,
+ PERC, 8,
+ PFRC, 8,
+ PGRC, 8,
+ PHRC, 8,
+ }
+
+ /*
+ * Pin# = group_pad# + group# * 24.
+ * For instance, GPP_A_6 would be pin#6,
+ * GPP_D_23 would be 23+(3*24), pin#95.
+ */
+ Name (GPPG, Package (0x02)
+ {
+ Package (0x08)
+ {
+ 0x18,
+ 0x18,
+ 0x18,
+ 0x18,
+ 0x18,
+ 0x18,
+ 0x08,
+ 0x0C
+ },
+
+ Package (0x0A)
+ {
+ 0x18,
+ 0x18,
+ 0x18,
+ 0x18,
+ 0x0D,
+ 0x18,
+ 0x18,
+ 0x18,
+ 0x0B,
+ 0x0C
+ }
+ })
+
+ Method (GNMB, 1, Serialized)
+ {
+ Return (And (Arg0, 0xFFFF))
+ }
+
+ Method (GGRP, 1, Serialized)
+ {
+ ShiftRight (And (Arg0, 0x00FF0000), 0x10, Local0)
+ Return (Local0)
+ }
+
+ /* Convert GPIO PAD name to GPIO number */
+ Method (INUM, 1, NotSerialized)
+ {
+ Store (One, Local0)
+ Store (GNMB (Arg0), Local1)
+ Store (GGRP (Arg0), Local2)
+ Store (Zero, Local3)
+
+ While (LLess (Local3, Local2))
+ {
+ Add (DerefOf (Index (DerefOf (Index
+ (GPPG, Local0)), Local3)),
+ Local1, Local1)
+ Increment (Local3)
+ }
+
+ Return (Add (0x18, Mod (Local1, 0x60)))
+ }
+}
diff --git a/src/soc/intel/skylake/acpi/lpc.asl b/src/soc/intel/skylake/acpi/lpc.asl
index 2b574f756d..8332980730 100644
--- a/src/soc/intel/skylake/acpi/lpc.asl
+++ b/src/soc/intel/skylake/acpi/lpc.asl
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,9 +16,11 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
+#include <soc/iomap.h>
+
// Intel LPC Bus Device - 0:1f.0
Device (LPCB)
@@ -33,16 +36,7 @@ Device (LPCB)
PMBS, 16, // PMBASE
Offset (0x48),
GPBS, 16, // GPIOBASE
- Offset (0x60), // Interrupt Routing Registers
- PRTA, 8,
- PRTB, 8,
- PRTC, 8,
- PRTD, 8,
- Offset (0x68),
- PRTE, 8,
- PRTF, 8,
- PRTG, 8,
- PRTH, 8,
+
Offset (0x80), // IO Decode Ranges
IOD0, 8,
@@ -74,48 +68,22 @@ Device (LPCB)
Device (HPET)
{
Name (_HID, EISAID("PNP0103"))
- Name (_CID, 0x010CD041)
-
Name (BUF0, ResourceTemplate()
{
- Memory32Fixed(ReadOnly, 0xfed00000, 0x400, FED0)
+ Memory32Fixed(ReadOnly, HPET_BASE_ADDRESS, 0x400, FED0)
})
Method (_STA, 0) // Device Status
{
- If (HPTE) {
- // Note: Ancient versions of Windows don't want
- // to see the HPET in order to work right
- If (LGreaterEqual(OSYS, 2001)) {
- Return (0xf) // Enable and show device
- } Else {
- Return (0xb) // Enable and don't show device
- }
- }
-
- Return (0x0) // Not enabled, don't show.
+ Return (0xf)
}
-
Method (_CRS, 0, Serialized) // Current resources
{
- If (HPTE) {
- CreateDWordField (BUF0,
- \_SB.PCI0.LPCB.HPET.FED0._BAS, HPT0)
-
- If (Lequal(HPAS, 1)) {
- Store(0xfed01000, HPT0)
- }
-
- If (Lequal(HPAS, 2)) {
- Store(0xfed02000, HPT0)
- }
-
- If (Lequal(HPAS, 3)) {
- Store(0xfed03000, HPT0)
- }
- }
+ CreateDWordField (BUF0, ^FED0._BAS, HPT0)
+ /* TODO: Base address configured need to pass as GNVS */
+ Store(HPET_BASE_ADDRESS, HPT0)
- Return (BUF0)
+ Return(BUF0)
}
}
diff --git a/src/soc/intel/skylake/acpi/pch.asl b/src/soc/intel/skylake/acpi/pch.asl
index 998133d9d9..2621eb287d 100644
--- a/src/soc/intel/skylake/acpi/pch.asl
+++ b/src/soc/intel/skylake/acpi/pch.asl
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,78 +16,47 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <soc/iomap.h>
Scope (\)
{
- // IO-Trap at 0x800. This is the ACPI->SMI communication interface.
+ /* IO-Trap at 0x800.
+ * This is the ACPI->SMI communication interface.
+ */
OperationRegion (IO_T, SystemIO, 0x800, 0x10)
Field (IO_T, ByteAcc, NoLock, Preserve)
{
Offset (0x8),
- TRP0, 8 // IO-Trap at 0x808
- }
-
- // Root Complex Register Block
- OperationRegion (RCRB, SystemMemory, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE)
- Field (RCRB, DWordAcc, Lock, Preserve)
- {
- Offset (0x3404), // High Performance Timer Configuration
- HPAS, 2, // Address Select
- , 5,
- HPTE, 1, // Address Enable
- }
-
- /*
- * Check PCH type
- * Return 1 if PCH is WildcatPoint
- * Return 0 if PCH is LynxPoint
- */
- Method (ISWP)
- {
- And (\_SB.PCI0.LPCB.PDID, 0xfff0, Local0)
- If (LEqual (Local0, 0x9cc0)) {
- Return (1)
- } Else {
- Return (0)
- }
+ TRP0, 8 /* IO-Trap at 0x808 */
}
}
-// High Definition Audio (Azalia) 0:1b.0
-#include "hda.asl"
-
-// ADSP/SST 0:13.0
-#include "adsp.asl"
-
-// PCI Express Ports 0:1c.x
+/* PCI Express Ports 0:1c.x */
#include "pcie.asl"
-// USB EHCI 0:1d.0
-#include "ehci.asl"
-
-// USB XHCI 0:14.0
+/* USB XHCI 0:14.0 */
#include "xhci.asl"
-// LPC Bridge 0:1f.0
+/* LPC Bridge 0:1f.0 */
#include "lpc.asl"
-// SATA 0:1f.2
-#include "sata.asl"
-
-// SMBus 0:1f.3
+/* SMBus 0:1f.3 */
#include "smbus.asl"
-// Serial IO
+/* Serial IO */
#include "serialio.asl"
+/* Interrupt Routing */
+#include "itss.asl"
+#include "irqlinks.asl"
+
Method (_OSC, 4)
{
/* Check for proper GUID */
- If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766")))
+ If (LEqual (Arg0, ToUUID ("33DB4D5B-1FF7-401C-9657-7441C03DD766")))
{
/* Let OS control everything */
Return (Arg3)
diff --git a/src/soc/intel/skylake/acpi/pci_irqs.asl b/src/soc/intel/skylake/acpi/pci_irqs.asl
index 0c23e10a51..c43e42dbb6 100644
--- a/src/soc/intel/skylake/acpi/pci_irqs.asl
+++ b/src/soc/intel/skylake/acpi/pci_irqs.asl
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,74 +16,127 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
Method(_PRT)
{
If (PICM) {
Return (Package() {
- // Onboard graphics (IGD) 0:2.0
- Package() { 0x0002ffff, 0, 0, 16 },
- // Mini-HD Audio 0:3.0
- Package() { 0x0003ffff, 0, 0, 16 },
- // High Definition Audio 0:1b.0
- Package() { 0x001bffff, 0, 0, 22 },
- // PCIe Root Ports 0:1c.x
- Package() { 0x001cffff, 0, 0, 16 },
- Package() { 0x001cffff, 1, 0, 17 },
- Package() { 0x001cffff, 2, 0, 18 },
- Package() { 0x001cffff, 3, 0, 19 },
- // EHCI 0:1d.0
- Package() { 0x001dffff, 0, 0, 19 },
- // Audio DSP (Smart Sound) 0:13.0
- Package() { 0x0013ffff, 0, 0, 23 },
- // XHCI 0:14.0
- Package() { 0x0014ffff, 0, 0, 18 },
- // LPC devices 0:1f.0
- Package() { 0x001fffff, 0, 0, 22 },
- Package() { 0x001fffff, 1, 0, 18 },
- Package() { 0x001fffff, 2, 0, 17 },
- Package() { 0x001fffff, 3, 0, 16 },
- // Serial IO 0:15.0
- Package() { 0x0015ffff, 0, 0, 20 },
- Package() { 0x0015ffff, 1, 0, 21 },
- Package() { 0x0015ffff, 2, 0, 21 },
- Package() { 0x0015ffff, 3, 0, 21 },
- // SDIO 0:17.0
- Package() { 0x0017ffff, 0, 0, 23 },
+ /* PCI Bridge */
+ /* D31: cAVS, SMBus, GbE, Nothpeak */
+ Package(){0x001FFFFF, 0, 0, 16 },
+ Package(){0x001FFFFF, 1, 0, 17 },
+ Package(){0x001FFFFF, 2, 0, 18 },
+ Package(){0x001FFFFF, 3, 0, 19 },
+ /* D30: SerialIo and SCS */
+ Package(){0x001EFFFF, 0, 0, 20 },
+ Package(){0x001EFFFF, 1, 0, 21 },
+ Package(){0x001EFFFF, 2, 0, 22 },
+ Package(){0x001EFFFF, 3, 0, 23 },
+ /* D29: PCI Express Port 9-16 */
+ Package(){0x001DFFFF, 0, 0, 16 },
+ Package(){0x001DFFFF, 1, 0, 17 },
+ Package(){0x001DFFFF, 2, 0, 18 },
+ Package(){0x001DFFFF, 3, 0, 19 },
+ /* D28: PCI Express Port 1-8 */
+ Package(){0x001CFFFF, 0, 0, 16 },
+ Package(){0x001CFFFF, 1, 0, 17 },
+ Package(){0x001CFFFF, 2, 0, 18 },
+ Package(){0x001CFFFF, 3, 0, 19 },
+ /* D27: PCI Express Port 17-20 */
+ Package(){0x001BFFFF, 0, 0, 16 },
+ Package(){0x001BFFFF, 1, 0, 17 },
+ Package(){0x001BFFFF, 2, 0, 18 },
+ Package(){0x001BFFFF, 3, 0, 19 },
+ /* D25: SerialIo */
+ Package(){0x0019FFFF, 0, 0, 32 },
+ Package(){0x0019FFFF, 1, 0, 33 },
+ Package(){0x0019FFFF, 2, 0, 34 },
+ /* D22: CSME (HECI, IDE-R, Keyboard and Text redirection */
+ Package(){0x0016FFFF, 0, 0, 16 },
+ Package(){0x0016FFFF, 1, 0, 17 },
+ Package(){0x0016FFFF, 2, 0, 18 },
+ Package(){0x0016FFFF, 3, 0, 19 },
+ /* D21: SerialIo */
+ Package(){0x0015FFFF, 0, 0, 16 },
+ Package(){0x0015FFFF, 1, 0, 17 },
+ Package(){0x0015FFFF, 2, 0, 18 },
+ Package(){0x0015FFFF, 3, 0, 19 },
+ /* D20: xHCI, OTG,
+ * Thermal Subsystem, Camera IO Host Controller
+ */
+ Package(){0x0014FFFF, 0, 0, 16 },
+ Package(){0x0014FFFF, 1, 0, 17 },
+ Package(){0x0014FFFF, 2, 0, 18 },
+ Package(){0x0014FFFF, 3, 0, 19 },
+ /* D19: Integrated Sensor Hub */
+ Package(){0x0013FFFF, 0, 0, 20 },
+
+ /* Host Bridge */
+ /* P.E.G. Root Port D1F0 */
+ Package(){0x0001FFFF, 0, 0, 16 },
+ Package(){0x0001FFFF, 1, 0, 17 },
+ Package(){0x0001FFFF, 2, 0, 18 },
+ Package(){0x0001FFFF, 3, 0, 19 },
+ /* P.E.G. Root Port D1F1 */
+ /* P.E.G. Root Port D1F2 */
+ /* SA IGFX Device */
+ Package(){0x0002FFFF, 0, 0, 16 },
+ /* SA Thermal Device */
+ Package(){0x0004FFFF, 0, 0, 16 },
+ /* SA SkyCam Device */
+ Package(){0x0005FFFF, 0, 0, 16 },
+ /* SA GMM Device */
+ Package(){0x0008FFFF, 0, 0, 16 },
})
} Else {
Return (Package() {
- // Onboard graphics (IGD) 0:2.0
- Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
- // Mini-HD Audio 0:3.0
- Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
- // High Definition Audio 0:1b.0
- Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 },
- // PCIe Root Ports 0:1c.x
- Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 },
- // EHCI 0:1d.0
- Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 },
- // Audio DSP (Smart Sound) 0:13.0
- Package() { 0x0013ffff, 0, \_SB.PCI0.LPCB.LNKH, 0 },
- // XHCI 0:14.0
- Package() { 0x0014ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 },
- // LPC device 0:1f.0
- Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKG, 0 },
- Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKA, 0 },
- // Serial IO 0:15.0
- Package() { 0x0015ffff, 0, \_SB.PCI0.LPCB.LNKE, 0 },
- Package() { 0x0015ffff, 1, \_SB.PCI0.LPCB.LNKF, 0 },
- Package() { 0x0015ffff, 2, \_SB.PCI0.LPCB.LNKF, 0 },
- Package() { 0x0015ffff, 3, \_SB.PCI0.LPCB.LNKF, 0 },
- // SDIO 0:17.0
- Package() { 0x0017ffff, 0, \_SB.PCI0.LPCB.LNKH, 0 },
+ /* D31 */
+ Package() { 0x001fffff, 0, \_SB.PCI0.LNKA, 0 },
+ Package() { 0x001fffff, 1, \_SB.PCI0.LNKB, 0 },
+ Package() { 0x001fffff, 2, \_SB.PCI0.LNKC, 0 },
+ Package() { 0x001fffff, 3, \_SB.PCI0.LNKD, 0 },
+ /* D29 */
+ Package() { 0x001dffff, 0, \_SB.PCI0.LNKA, 0 },
+ Package() { 0x001dffff, 1, \_SB.PCI0.LNKB, 0 },
+ Package() { 0x001dffff, 2, \_SB.PCI0.LNKC, 0 },
+ Package() { 0x001dffff, 3, \_SB.PCI0.LNKD, 0 },
+ /* D28 */
+ Package() { 0x001cffff, 0, \_SB.PCI0.LNKA, 0 },
+ Package() { 0x001cffff, 1, \_SB.PCI0.LNKB, 0 },
+ Package() { 0x001cffff, 2, \_SB.PCI0.LNKC, 0 },
+ Package() { 0x001cffff, 3, \_SB.PCI0.LNKD, 0 },
+ /* D27 */
+ Package() { 0x001bffff, 0, \_SB.PCI0.LNKA, 0 },
+ Package() { 0x001bffff, 1, \_SB.PCI0.LNKB, 0 },
+ Package() { 0x001bffff, 2, \_SB.PCI0.LNKC, 0 },
+ Package() { 0x001bffff, 3, \_SB.PCI0.LNKD, 0 },
+ /* D23 */
+ Package() { 0x0017ffff, 0, \_SB.PCI0.LNKA, 0 },
+ /* D22 */
+ Package() { 0x0016ffff, 0, \_SB.PCI0.LNKA, 0 },
+ Package() { 0x0016ffff, 1, \_SB.PCI0.LNKB, 0 },
+ Package() { 0x0016ffff, 2, \_SB.PCI0.LNKC, 0 },
+ Package() { 0x0016ffff, 3, \_SB.PCI0.LNKD, 0 },
+ /* D20 */
+ Package() { 0x0014ffff, 0, \_SB.PCI0.LNKA, 0 },
+ Package() { 0x0014ffff, 1, \_SB.PCI0.LNKB, 0 },
+ Package() { 0x0014ffff, 2, \_SB.PCI0.LNKC, 0 },
+ Package() { 0x0014ffff, 3, \_SB.PCI0.LNKD, 0 },
+ /* Host bridge */
+ Package() { 0x0001ffff, 0, \_SB.PCI0.LNKA, 0 },
+ Package() { 0x0001ffff, 1, \_SB.PCI0.LNKB, 0 },
+ Package() { 0x0001ffff, 2, \_SB.PCI0.LNKC, 0 },
+ Package() { 0x0001ffff, 3, \_SB.PCI0.LNKD, 0 },
+ /* SA IGFX Device */
+ Package() { 0x0002ffff, 0, \_SB.PCI0.LNKA, 0 },
+ /* SA Thermal Device */
+ Package() { 0x0004ffff, 0, \_SB.PCI0.LNKA, 0 },
+ /* SA Skycam Device */
+ Package() { 0x0005ffff, 0, \_SB.PCI0.LNKA, 0 },
+ /* SA GMM Device */
+ Package() { 0x0008ffff, 0, \_SB.PCI0.LNKA, 0 },
})
}
}
diff --git a/src/soc/intel/skylake/acpi/pcie.asl b/src/soc/intel/skylake/acpi/pcie.asl
index a48bdde0e3..7ab78e0b09 100644
--- a/src/soc/intel/skylake/acpi/pcie.asl
+++ b/src/soc/intel/skylake/acpi/pcie.asl
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
/* Intel PCH PCIe support */
@@ -29,10 +30,10 @@ Method (IRQM, 1, Serialized) {
Package() { 0x0000ffff, 2, 0, 18 },
Package() { 0x0000ffff, 3, 0, 19 } })
Name (IQAP, Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 } })
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LNKA, 0 },
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LNKB, 0 },
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LNKC, 0 },
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LNKD, 0 } })
/* Interrupt Map INTA->INTB, INTB->INTC, INTC->INTD, INTD->INTA */
Name (IQBA, Package() {
@@ -41,10 +42,10 @@ Method (IRQM, 1, Serialized) {
Package() { 0x0000ffff, 2, 0, 19 },
Package() { 0x0000ffff, 3, 0, 16 } })
Name (IQBP, Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 } })
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LNKB, 0 },
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LNKC, 0 },
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LNKD, 0 },
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LNKA, 0 } })
/* Interrupt Map INTA->INTC, INTB->INTD, INTC->INTA, INTD->INTB */
Name (IQCA, Package() {
@@ -53,10 +54,10 @@ Method (IRQM, 1, Serialized) {
Package() { 0x0000ffff, 2, 0, 16 },
Package() { 0x0000ffff, 3, 0, 17 } })
Name (IQCP, Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKD, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKB, 0 } })
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LNKC, 0 },
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LNKD, 0 },
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LNKA, 0 },
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LNKB, 0 } })
/* Interrupt Map INTA->INTD, INTB->INTA, INTC->INTB, INTD->INTC */
Name (IQDA, Package() {
@@ -65,10 +66,10 @@ Method (IRQM, 1, Serialized) {
Package() { 0x0000ffff, 2, 0, 17 },
Package() { 0x0000ffff, 3, 0, 18 } })
Name (IQDP, Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKC, 0 } })
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LNKD, 0 },
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LNKA, 0 },
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LNKB, 0 },
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LNKC, 0 } })
Switch (ToInteger (Arg0)) {
/* PCIe Root Port 1 and 5 */
@@ -121,11 +122,9 @@ Device (RP01)
{
Name (_ADR, 0x001c0000)
- #include "pcie_port.asl"
-
Method (_PRT)
{
- Return (IRQM (RPPN))
+ Return (IRQM (RPA1))
}
}
@@ -133,11 +132,9 @@ Device (RP02)
{
Name (_ADR, 0x001c0001)
- #include "pcie_port.asl"
-
Method (_PRT)
{
- Return (IRQM (RPPN))
+ Return (IRQM (RPA2))
}
}
@@ -145,11 +142,9 @@ Device (RP03)
{
Name (_ADR, 0x001c0002)
- #include "pcie_port.asl"
-
Method (_PRT)
{
- Return (IRQM (RPPN))
+ Return (IRQM (RPA3))
}
}
@@ -157,11 +152,9 @@ Device (RP04)
{
Name (_ADR, 0x001c0003)
- #include "pcie_port.asl"
-
Method (_PRT)
{
- Return (IRQM (RPPN))
+ Return (IRQM (RPA4))
}
}
@@ -169,11 +162,9 @@ Device (RP05)
{
Name (_ADR, 0x001c0004)
- #include "pcie_port.asl"
-
Method (_PRT)
{
- Return (IRQM (RPPN))
+ Return (IRQM (RPA5))
}
}
@@ -181,11 +172,9 @@ Device (RP06)
{
Name (_ADR, 0x001c0005)
- #include "pcie_port.asl"
-
Method (_PRT)
{
- Return (IRQM (RPPN))
+ Return (IRQM (RPA6))
}
}
@@ -193,11 +182,9 @@ Device (RP07)
{
Name (_ADR, 0x001c0006)
- #include "pcie_port.asl"
-
Method (_PRT)
{
- Return (IRQM (RPPN))
+ Return (IRQM (RPA7))
}
}
@@ -205,10 +192,48 @@ Device (RP08)
{
Name (_ADR, 0x001c0007)
- #include "pcie_port.asl"
-
Method (_PRT)
{
- Return (IRQM (RPPN))
+ Return (IRQM (RPA8))
}
}
+Device (RP09)
+{
+ Name (_ADR, 0x001D0000)
+
+ Method (_PRT)
+ {
+ Return (IRQM (RPA9))
+ }
+}
+
+Device (RP10)
+{
+ Name (_ADR, 0x001D0001)
+
+ Method (_PRT)
+ {
+ Return (IRQM (RPAA))
+ }
+}
+
+Device (RP11)
+{
+ Name (_ADR, 0x001D0002)
+
+ Method (_PRT)
+ {
+ Return (IRQM (RPAB))
+ }
+}
+
+Device (RP12)
+{
+ Name (_ADR, 0x001D0003)
+
+ Method (_PRT)
+ {
+ Return (IRQM (RPAC))
+ }
+}
+
diff --git a/src/soc/intel/skylake/acpi/pcie_port.asl b/src/soc/intel/skylake/acpi/pcie_port.asl
deleted file mode 100644
index 32267461b7..0000000000
--- a/src/soc/intel/skylake/acpi/pcie_port.asl
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* Included in each PCIe Root Port device */
-
-OperationRegion (RPCS, PCI_Config, 0x00, 0xFF)
-Field (RPCS, AnyAcc, NoLock, Preserve)
-{
- Offset (0x4c), // Link Capabilities
- , 24,
- RPPN, 8, // Root Port Number
-}
diff --git a/src/soc/intel/skylake/acpi/platform.asl b/src/soc/intel/skylake/acpi/platform.asl
index f63168a745..2bbe97be80 100644
--- a/src/soc/intel/skylake/acpi/platform.asl
+++ b/src/soc/intel/skylake/acpi/platform.asl
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
/* The APM port can be used for generating software SMIs */
@@ -43,7 +44,8 @@ Method (TRAP, 1, Serialized)
Return (SMIF) // Return value of SMI handler
}
-/* The _PIC method is called by the OS to choose between interrupt
+/*
+ * The _PIC method is called by the OS to choose between interrupt
* routing via the i8259 interrupt controller or the APIC.
*
* _PIC is called with a parameter of 0 for i8259 configuration and
diff --git a/src/soc/intel/skylake/acpi/sata.asl b/src/soc/intel/skylake/acpi/sata.asl
deleted file mode 100644
index 0af2a3f3f5..0000000000
--- a/src/soc/intel/skylake/acpi/sata.asl
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-// Intel SATA Controller 0:1f.2
-Device (SATA)
-{
- Name (_ADR, 0x001f0002)
-}
diff --git a/src/soc/intel/skylake/acpi/serialio.asl b/src/soc/intel/skylake/acpi/serialio.asl
index 7ffc671a74..203dbef7c5 100644
--- a/src/soc/intel/skylake/acpi/serialio.asl
+++ b/src/soc/intel/skylake/acpi/serialio.asl
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,20 +15,22 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
+#include <soc/irq.h>
// Intel Serial IO Devices in ACPI Mode
-// Serial IO Device BAR0 and BAR1 is 4KB
+/* Serial IO Device BAR0 and BAR1 is 4KB */
#define SIO_BAR_LEN 0x1000
-// Put SerialIO device in D0 state
-// Arg0 - BAR1 of device
-// Arg1 - Set if device is in ACPI mode
+/* Put SerialIO device in D0 state */
+/* Arg0 - BAR1 of device */
+/* Arg1 - Set if device is in ACPI mode */
+
Method (LPD0, 2, Serialized)
{
- // PCI mode devices will be handled by OS PCI bus driver
+ /* PCI mode devices will be handled by OS PCI bus driver */
If (LEqual (Arg1, 0)) {
Return
}
@@ -39,146 +42,80 @@ Method (LPD0, 2, Serialized)
}
And (SPCS, 0xFFFFFFFC, SPCS)
- Store (SPCS, Local0) // Read back after writing
+ /* Read back after writing */
+ Store (SPCS, Local0)
}
-// Put SerialIO device in D3 state
-// Arg0 - BAR1 of device
-// Arg1 - Set if device is in ACPI mode
+/* Put SerialIO device in D3 state */
+/* Arg0 - BAR1 of device */
+/* Arg1 - Set if device is in ACPI mode */
+
Method (LPD3, 2, Serialized)
{
- // PCI mode devices will be handled by OS PCI bus driver
+ /* PCI mode devices will be handled by OS PCI bus driver */
If (LEqual (Arg1, 0)) {
Return
}
-
OperationRegion (SPRT, SystemMemory, Add (Arg0, 0x84), 4)
Field (SPRT, DWordAcc, NoLock, Preserve)
{
SPCS, 32
}
-
Or (SPCS, 0x3, SPCS)
Store (SPCS, Local0) // Read back after writing
}
-// Serial IO Resource Consumption for BAR1
+/* Serial IO Resource Consumption for BAR1 */
Device (SIOR)
{
Name (_HID, EISAID("PNP0C02"))
- Name (_UID, 4)
-
- Name (RBUF, ResourceTemplate()
- {
- // Serial IO BAR1 (PCI config space) resources
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D0) // SDMA
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D1) // I2C0
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D2) // I2C1
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D3) // SPI0
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D4) // SPI1
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D5) // UART0
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D6) // UART1
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D7) // SDIO
- })
-
- // Update BAR1 address and length if set in NVS
- Method (_CRS, 0, NotSerialized)
+ Name (_UID, 5)
+ Method(ADDB,3,Serialized) {
+ Name (BUFF, ResourceTemplate()
{
- // SDMA
- If (LNotEqual (\S0B1, Zero)) {
- CreateDwordField (^RBUF, ^B1D0._BAS, B0AD)
- CreateDwordField (^RBUF, ^B1D0._LEN, B0LN)
- Store (\S0B1, B0AD)
- Store (SIO_BAR_LEN, B0LN)
- }
-
- // I2C0
- If (LNotEqual (\S1B1, Zero)) {
- CreateDwordField (^RBUF, ^B1D1._BAS, B1AD)
- CreateDwordField (^RBUF, ^B1D1._LEN, B1LN)
- Store (\S1B1, B1AD)
- Store (SIO_BAR_LEN, B1LN)
- }
-
- // I2C1
- If (LNotEqual (\S2B1, Zero)) {
- CreateDwordField (^RBUF, ^B1D2._BAS, B2AD)
- CreateDwordField (^RBUF, ^B1D2._LEN, B2LN)
- Store (\S2B1, B2AD)
- Store (SIO_BAR_LEN, B2LN)
- }
-
- // SPI0
- If (LNotEqual (\S3B1, Zero)) {
- CreateDwordField (^RBUF, ^B1D3._BAS, B3AD)
- CreateDwordField (^RBUF, ^B1D3._LEN, B3LN)
- Store (\S3B1, B3AD)
- Store (SIO_BAR_LEN, B3LN)
- }
-
- // SPI1
- If (LNotEqual (\S4B1, Zero)) {
- CreateDwordField (^RBUF, ^B1D4._BAS, B4AD)
- CreateDwordField (^RBUF, ^B1D4._LEN, B4LN)
- Store (\S4B1, B4AD)
- Store (SIO_BAR_LEN, B4LN)
- }
-
- // UART0
- If (LNotEqual (\S5B1, Zero)) {
- CreateDwordField (^RBUF, ^B1D5._BAS, B5AD)
- CreateDwordField (^RBUF, ^B1D5._LEN, B5LN)
- Store (\S5B1, B5AD)
- Store (SIO_BAR_LEN, B5LN)
- }
-
- // UART1
- If (LNotEqual (\S6B1, Zero)) {
- CreateDwordField (^RBUF, ^B1D6._BAS, B6AD)
- CreateDwordField (^RBUF, ^B1D6._LEN, B6LN)
- Store (\S6B1, B6AD)
- Store (SIO_BAR_LEN, B6LN)
- }
-
- // SDIO
- If (LNotEqual (\S7B1, Zero)) {
- CreateDwordField (^RBUF, ^B1D7._BAS, B7AD)
- CreateDwordField (^RBUF, ^B1D7._LEN, B7LN)
- Store (\S7B1, B7AD)
- Store (SIO_BAR_LEN, B7LN)
- }
-
- Return (RBUF)
+ Memory32Fixed (ReadWrite, 0x00000000, 0x1000, BUF)
+ })
+ CreateDWordField(BUFF,BUF._BAS,ADDR)
+ CreateDWordField(BUFF,BUF._LEN,LENG)
+ Store(ResourceTemplate(){}, Local0)
+ //Return (RBUF)
}
}
-Device (SDMA)
+Device (I2C0)
{
- // Serial IO DMA Controller
- Name (_HID, "INTL9C60")
+ /* Serial IO I2C0 Controller */
+ Name (_HID,"INT3442")
Name (_UID, 1)
Name (_ADR, 0x00150000)
+ Name (SSCN, Package () { 432, 507, 30 })
+ Name (FMCN, Package () { 72, 160, 30 })
- // BAR0 is assigned during PCI enumeration and saved into NVS
+ /* BAR0 is assigned during PCI enumeration and saved into NVS */
Name (RBUF, ResourceTemplate ()
{
Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7}
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ { LPSS_I2C0_IRQ }
})
+ /* DMA channels are only used if Serial IO DMA controller is enabled */
+ Name (DBUF, ResourceTemplate ()
+ {
+ FixedDMA (0x18, 4, Width32Bit, DMA1) // Tx
+ FixedDMA (0x19, 5, Width32Bit, DMA2) // Rx
+ })
Method (_CRS, 0, NotSerialized)
{
- // Update BAR0 address and length if set in NVS
+ /* Update BAR0 address and length if set in NVS */
If (LNotEqual (\S0B0, Zero)) {
CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
Store (\S0B0, B0AD)
Store (SIO_BAR_LEN, B0LN)
}
-
Return (RBUF)
}
-
Method (_STA, 0, NotSerialized)
{
If (LEqual (\S0EN, 0)) {
@@ -187,59 +124,56 @@ Device (SDMA)
Return (0xF)
}
}
-}
-Device (I2C0)
-{
- // Serial IO I2C0 Controller
- Method (_HID)
+ Method (_PS0, 0, Serialized)
{
- If (\ISWP ()) {
- // WildcatPoint
- Return ("INT3432")
- }
+ ^^LPD0 (\S0B1, \S0EN)
+ }
- // LynxPoint-LP
- Return ("INT33C2")
+ Method (_PS3, 0, Serialized)
+ {
+ ^^LPD3 (\S0B1, \S0EN)
}
+
+}
+
+Device (I2C1)
+{
+ /* Serial IO I2C1 Controller */
+ Name (_HID,"INT3443")
Name (_UID, 1)
Name (_ADR, 0x00150001)
+ Name (SSCN, Package () { 528, 640, 30 })
+ Name (FMCN, Package () { 128, 160, 30 })
+ Name (FPCN, Package () { 48, 64, 30})
- Name (SSCN, Package () { 432, 507, 30 })
- Name (FMCN, Package () { 72, 160, 30 })
-
- // BAR0 is assigned during PCI enumeration and saved into NVS
+ /* BAR0 is assigned during PCI enumeration and saved into NVS */
Name (RBUF, ResourceTemplate ()
{
Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7}
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ { LPSS_I2C1_IRQ }
})
- // DMA channels are only used if Serial IO DMA controller is enabled
+ /* DMA channels are only used if
+ * Serial IO DMA controller is enabled
+ */
Name (DBUF, ResourceTemplate ()
{
- FixedDMA (0x18, 4, Width32Bit, DMA1) // Tx
- FixedDMA (0x19, 5, Width32Bit, DMA2) // Rx
+ FixedDMA (0x1A, 6, Width32Bit, DMA1) // Tx
+ FixedDMA (0x1B, 7, Width32Bit, DMA2) // Rx
})
-
Method (_CRS, 0, NotSerialized)
{
- // Update BAR0 address and length if set in NVS
+ /* Update BAR0 address and length if set in NVS */
If (LNotEqual (\S1B0, Zero)) {
CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
Store (\S1B0, B0AD)
Store (SIO_BAR_LEN, B0LN)
}
-
- // Check if Serial IO DMA Controller is enabled
- If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) {
- Return (ConcatenateResTemplate (RBUF, DBUF))
- } Else {
- Return (RBUF)
- }
+ Return (RBUF)
}
-
Method (_STA, 0, NotSerialized)
{
If (LEqual (\S1EN, 0)) {
@@ -260,42 +194,36 @@ Device (I2C0)
}
}
-Device (I2C1)
-{
- // Serial IO I2C1 Controller
- Method (_HID)
- {
- If (\ISWP ()) {
- // WildcatPoint
- Return ("INT3433")
- }
- // LynxPoint-LP
- Return ("INT33C3")
- }
+Device (I2C2)
+{
+ /* Serial IO I2C1 Controller */
+ Name (_HID,"INT3444")
Name (_UID, 1)
Name (_ADR, 0x00150002)
-
Name (SSCN, Package () { 432, 507, 30 })
Name (FMCN, Package () { 72, 160, 30 })
- // BAR0 is assigned during PCI enumeration and saved into NVS
+ /* BAR0 is assigned during PCI enumeration and saved into NVS */
Name (RBUF, ResourceTemplate ()
{
Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7}
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ { LPSS_I2C2_IRQ }
})
- // DMA channels are only used if Serial IO DMA controller is enabled
+ /* DMA channels are only used if
+ * Serial IO DMA controller is enabled
+ */
Name (DBUF, ResourceTemplate ()
{
- FixedDMA (0x1A, 6, Width32Bit, DMA1) // Tx
- FixedDMA (0x1B, 7, Width32Bit, DMA2) // Rx
+ FixedDMA (0x1A, 6, Width32Bit, DMA1)
+ FixedDMA (0x1B, 7, Width32Bit, DMA2)
})
Method (_CRS, 0, NotSerialized)
{
- // Update BAR0 address and length if set in NVS
+ /* Update BAR0 address and length if set in NVS */
If (LNotEqual (\S2B0, Zero)) {
CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
@@ -303,12 +231,8 @@ Device (I2C1)
Store (SIO_BAR_LEN, B0LN)
}
- // Check if Serial IO DMA Controller is enabled
- If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) {
- Return (ConcatenateResTemplate (RBUF, DBUF))
- } Else {
- Return (RBUF)
- }
+ /* Check if Serial IO DMA Controller is enabled */
+ Return (RBUF)
}
Method (_STA, 0, NotSerialized)
@@ -331,32 +255,35 @@ Device (I2C1)
}
}
-Device (SPI0)
+Device (I2C3)
{
- // Serial IO SPI0 Controller
- Method (_HID)
- {
- If (\ISWP ()) {
- // WildcatPoint
- Return ("INT3430")
- }
-
- // LynxPoint-LP
- Return ("INT33C0")
- }
+ /* Serial IO I2C3 Controller */
+ Name (_HID,"INT3445")
Name (_UID, 1)
Name (_ADR, 0x00150003)
+ Name (SSCN, Package () { 432, 507, 30 })
+ Name (FMCN, Package () { 72, 160, 30 })
- // BAR0 is assigned during PCI enumeration and saved into NVS
+ /* BAR0 is assigned during PCI enumeration and saved into NVS */
Name (RBUF, ResourceTemplate ()
{
Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7}
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ { LPSS_I2C3_IRQ }
+ })
+
+ /* DMA channels are only used if
+ * Serial IO DMA controller is enabled
+ */
+ Name (DBUF, ResourceTemplate ()
+ {
+ FixedDMA (0x1A, 6, Width32Bit, DMA1)
+ FixedDMA (0x1B, 7, Width32Bit, DMA2)
})
Method (_CRS, 0, NotSerialized)
{
- // Update BAR0 address and length if set in NVS
+ /* Update BAR0 address and length if set in NVS */
If (LNotEqual (\S3B0, Zero)) {
CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
@@ -364,6 +291,7 @@ Device (SPI0)
Store (SIO_BAR_LEN, B0LN)
}
+ /* Check if Serial IO DMA Controller is enabled */
Return (RBUF)
}
@@ -385,56 +313,48 @@ Device (SPI0)
{
^^LPD3 (\S3B1, \S3EN)
}
+
}
-Device (SPI1)
+Device (I2C4)
{
- // Serial IO SPI1 Controller
- Method (_HID)
- {
- If (\ISWP ()) {
- // WildcatPoint
- Return ("INT3431")
- }
-
- // LynxPoint-LP
- Return ("INT33C1")
- }
+ /* Serial IO I2C4 Controller */
+ Name (_HID,"INT3446")
Name (_UID, 1)
- Name (_ADR, 0x00150004)
+ Name (_ADR, 0x00190002)
+ Name (SSCN, Package () { 432, 507, 30 })
+ Name (FMCN, Package () { 72, 160, 30 })
- // BAR0 is assigned during PCI enumeration and saved into NVS
+ /* BAR0 is assigned during PCI enumeration and saved into NVS */
Name (RBUF, ResourceTemplate ()
{
Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7}
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ { LPSS_I2C4_IRQ }
})
- // DMA channels are only used if Serial IO DMA controller is enabled
+ /* DMA channels are only used if
+ * Serial IO DMA controller is enabled
+ */
Name (DBUF, ResourceTemplate ()
{
- FixedDMA (0x10, 0, Width32Bit, DMA1) // Tx
- FixedDMA (0x11, 1, Width32Bit, DMA2) // Rx
+ FixedDMA (0x1A, 6, Width32Bit, DMA1)
+ FixedDMA (0x1B, 7, Width32Bit, DMA2)
})
Method (_CRS, 0, NotSerialized)
{
- // Update BAR0 address and length if set in NVS
- If (LNotEqual (\S4B0, Zero)) {
+ /* Update BAR0 address and length if set in NVS*/
+ If (LNotEqual (\S4B0, Zero)) {
CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
Store (\S4B0, B0AD)
Store (SIO_BAR_LEN, B0LN)
}
- // Check if Serial IO DMA Controller is enabled
- If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) {
- Return (ConcatenateResTemplate (RBUF, DBUF))
- } Else {
- Return (RBUF)
- }
+ /* Check if Serial IO DMA Controller is enabled */
+ Return (RBUF)
}
-
Method (_STA, 0, NotSerialized)
{
If (LEqual (\S4EN, 0)) {
@@ -455,52 +375,43 @@ Device (SPI1)
}
}
-Device (UAR0)
+Device (I2C5)
{
- // Serial IO UART0 Controller
- Method (_HID)
- {
- If (\ISWP ()) {
- // WildcatPoint
- Return ("INT3434")
- }
-
- // LynxPoint-LP
- Return ("INT33C4")
- }
+ /* Serial IO I2C1 Controller */
+ Name (_HID,"INT3447")
Name (_UID, 1)
- Name (_ADR, 0x00150005)
+ Name (_ADR, 0x00190002)
+ Name (SSCN, Package () { 432, 507, 30 })
+ Name (FMCN, Package () { 72, 160, 30 })
- // BAR0 is assigned during PCI enumeration and saved into NVS
+ /* BAR0 is assigned during PCI enumeration and saved into NVS */
Name (RBUF, ResourceTemplate ()
{
- Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {13}
+ Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ { LPSS_I2C5_IRQ }
})
- // DMA channels are only used if Serial IO DMA controller is enabled
+ /* DMA channels are only used if
+ * Serial IO DMA controller is enabled
+ */
Name (DBUF, ResourceTemplate ()
{
- FixedDMA (0x16, 2, Width32Bit, DMA1) // Tx
- FixedDMA (0x17, 3, Width32Bit, DMA2) // Rx
+ FixedDMA (0x1A, 6, Width32Bit, DMA1)
+ FixedDMA (0x1B, 7, Width32Bit, DMA2)
})
Method (_CRS, 0, NotSerialized)
{
- // Update BAR0 address and length if set in NVS
- If (LNotEqual (\S5B0, Zero)) {
- CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
- CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
- Store (\S5B0, B0AD)
- Store (SIO_BAR_LEN, B0LN)
- }
+ /* Update BAR0 address and length if set in NVS */
+ CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
+ CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
+ Store (0xFE02A000, B0AD)
+ Store (SIO_BAR_LEN, B0LN)
- // Check if Serial IO DMA Controller is enabled
- If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) {
- Return (ConcatenateResTemplate (RBUF, DBUF))
- } Else {
- Return (RBUF)
- }
+
+ /* Check if Serial IO DMA Controller is enabled */
+ Return (RBUF)
}
Method (_STA, 0, NotSerialized)
@@ -523,32 +434,24 @@ Device (UAR0)
}
}
-Device (UAR1)
+Device (SPI0)
{
- // Serial IO UART1 Controller
- Method (_HID)
- {
- If (\ISWP ()) {
- // WildcatPoint
- Return ("INT3435")
- }
-
- // LynxPoint-LP
- Return ("INT33C5")
- }
+ /* Serial IO PI0 Controller */
+ Name (_HID,"INT3440")
Name (_UID, 1)
- Name (_ADR, 0x00150006)
+ Name (_ADR, 0x001E0002)
- // BAR0 is assigned during PCI enumeration and saved into NVS
+ /* BAR0 is assigned during PCI enumeration and saved into NVS */
Name (RBUF, ResourceTemplate ()
{
Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {13}
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ { LPSS_SPI0_IRQ }
})
Method (_CRS, 0, NotSerialized)
{
- // Update BAR0 address and length if set in NVS
+ /* Update BAR0 address and length if set in NVS */
If (LNotEqual (\S6B0, Zero)) {
CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
@@ -567,7 +470,6 @@ Device (UAR1)
Return (0xF)
}
}
-
Method (_PS0, 0, Serialized)
{
^^LPD0 (\S6B1, \S6EN)
@@ -579,37 +481,129 @@ Device (UAR1)
}
}
-Device (SDIO)
+Device (SPI1)
{
- // Serial IO SDIO Controller
- Method (_HID)
+ /* Serial IO SPI1 Controller */
+ Name (_HID,"INT3441")
+ Name (_UID, 1)
+ Name (_ADR, 0x001E0003)
+
+ /* BAR0 is assigned during PCI enumeration and saved into NVS */
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ { LPSS_SPI1_IRQ }
+ })
+
+ /* DMA channels are only used if Serial IO DMA controller is enabled */
+ Name (DBUF, ResourceTemplate ()
+ {
+ FixedDMA (0x10, 0, Width32Bit, DMA1) /* Tx */
+ FixedDMA (0x11, 1, Width32Bit, DMA2) /* Rx */
+ })
+ Method (_CRS, 0, NotSerialized)
{
- If (\ISWP ()) {
- // WildcatPoint
- Return ("INT3436")
+ /* Update BAR0 address and length if set in NVS */
+ If (LNotEqual (\S7B0, Zero)) {
+ CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
+ CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
+ Store (\S7B0, B0AD)
+ Store (SIO_BAR_LEN, B0LN)
}
- // LynxPoint-LP
- Return ("INT33C6")
+ Return (RBUF)
+ }
+ Method (_STA, 0, NotSerialized)
+ {
+ If (LEqual (\S7EN, 0)) {
+ Return (0x0)
+ } Else {
+ Return (0xF)
+ }
+ }
+
+ Method (_PS0, 0, Serialized)
+ {
+ ^^LPD0 (\S7B1, \S7EN)
+ }
+
+ Method (_PS3, 0, Serialized)
+ {
+ ^^LPD3 (\S7B1, \S7EN)
+ }
+}
+
+Device (UAR0)
+{
+ /* Serial IO UART0 Controller */
+ Name (_HID,"INT3448")
+ Name (_UID, 1)
+ Name (_ADR, 0x001E0000)
+
+ /* BAR0 is assigned during PCI enumeration and saved into NVS */
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ { LPSS_UART0_IRQ }
+ })
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ /* Update BAR0 address and length if set in NVS */
+ If (LNotEqual (\S8B0, Zero)) {
+ CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
+ CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
+ Store (\S8B0, B0AD)
+ Store (SIO_BAR_LEN, B0LN)
+ }
+
+ Return (RBUF)
+ }
+
+ Method (_STA, 0, NotSerialized)
+ {
+ If (LEqual (\S8EN, 0)) {
+ Return (0x0)
+ } Else {
+ Return (0xF)
+ }
+ }
+
+ Method (_PS0, 0, Serialized)
+ {
+ ^^LPD0 (\S8B1, \S8EN)
+ }
+
+ Method (_PS3, 0, Serialized)
+ {
+ ^^LPD3 (\S8B1, \S8EN)
}
- Name (_CID, "PNP0D40")
+}
+
+Device (UAR1)
+{
+ /* Serial IO UART1 Controller */
+ Name (_HID,"INT3449")
Name (_UID, 1)
- Name (_ADR, 0x00170000)
+ Name (_ADR, 0x001E0001)
- // BAR0 is assigned during PCI enumeration and saved into NVS
+ /* BAR0 is assigned during PCI enumeration and saved into NVS */
Name (RBUF, ResourceTemplate ()
{
Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {5}
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ { LPSS_UART1_IRQ }
})
Method (_CRS, 0, NotSerialized)
{
// Update BAR0 address and length if set in NVS
- If (LNotEqual (\S7B0, Zero)) {
+ If (LNotEqual (\S9B0, Zero)) {
CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
- Store (\S7B0, B0AD)
+ Store (\S9B0, B0AD)
Store (SIO_BAR_LEN, B0LN)
}
@@ -618,10 +612,97 @@ Device (SDIO)
Method (_STA, 0, NotSerialized)
{
- If (LEqual (\S7EN, 0)) {
+ If (LEqual (\S9EN, 0)) {
Return (0x0)
} Else {
Return (0xF)
}
}
+
+ Method (_PS0, 0, Serialized)
+ {
+ ^^LPD0 (\S9B1, \S9EN)
+ }
+
+ Method (_PS3, 0, Serialized)
+ {
+ ^^LPD3 (\S9B1, \S9EN)
+ }
}
+
+Device (UAR2)
+{
+ /* Serial IO UART1 Controller */
+ Name (_HID,"INT344A")
+ Name (_UID, 1)
+ Name (_ADR, 0x00190000)
+
+ /* BAR0 is assigned during PCI enumeration and saved into NVS */
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , )
+ { LPSS_UART2_IRQ }
+ })
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ /* Update BAR0 address and length if set in NVS */
+ If (LNotEqual (\SAB0, Zero)) {
+ CreateDwordField (^RBUF, ^BAR0._BAS, B0AD)
+ CreateDwordField (^RBUF, ^BAR0._LEN, B0LN)
+ Store (\SAB0, B0AD)
+ Store (SIO_BAR_LEN, B0LN)
+ }
+
+ Return (RBUF)
+ }
+
+ Method (_STA, 0, NotSerialized)
+ {
+ If (LEqual (\SAEN, 0)) {
+ Return (0x0)
+ } Else {
+ Return (0xF)
+ }
+ }
+
+ Method (_PS0, 0, Serialized)
+ {
+ ^^LPD0 (\SAB1, \SAEN)
+ }
+
+ Method (_PS3, 0, Serialized)
+ {
+ ^^LPD3 (\SAB1, \SAEN)
+ }
+}
+
+
+Device (PEMC)
+{
+ Name (_ADR, 0x001E0004)
+ Device (CARD)
+ {
+ Name (_ADR, 0x00000008)
+ Method (_RMV, 0x0, NotSerialized)
+ {
+ Return (0)
+ }
+ }
+}
+
+/* SD controller */
+Device (PSDC)
+{
+ Name (_ADR, 0x001E0006)
+ Device (CARD)
+ {
+ Name (_ADR, 0x00000008)
+ Method (_RMV, 0x0, NotSerialized)
+ {
+ Return (1)
+ }
+ }
+}
+
diff --git a/src/soc/intel/skylake/acpi/sleepstates.asl b/src/soc/intel/skylake/acpi/sleepstates.asl
index 6fea862d86..dda7d14029 100644
--- a/src/soc/intel/skylake/acpi/sleepstates.asl
+++ b/src/soc/intel/skylake/acpi/sleepstates.asl
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
Name (\_S0, Package () { 0x0, 0x0, 0x0, 0x0 })
diff --git a/src/soc/intel/skylake/acpi/smbus.asl b/src/soc/intel/skylake/acpi/smbus.asl
index 15bcfde69a..31a5114792 100644
--- a/src/soc/intel/skylake/acpi/smbus.asl
+++ b/src/soc/intel/skylake/acpi/smbus.asl
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,14 +16,14 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
// Intel SMBus Controller 0:1f.3
Device (SBUS)
{
- Name (_ADR, 0x001f0003)
+ Name (_ADR, 0x001f0004)
#ifdef ENABLE_SMBUS_METHODS
OperationRegion (SMBP, PCI_Config, 0x00, 0x100)
diff --git a/src/soc/intel/skylake/acpi/systemagent.asl b/src/soc/intel/skylake/acpi/systemagent.asl
index c2049ea2e3..b8fec94e9e 100644
--- a/src/soc/intel/skylake/acpi/systemagent.asl
+++ b/src/soc/intel/skylake/acpi/systemagent.asl
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,11 +16,14 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <soc/iomap.h>
+#define BASE_32GB 0x800000000
+#define SIZE_16GB 0x400000000
+
Name (_HID, EISAID ("PNP0A08")) // PCIe
Name (_CID, EISAID ("PNP0A03")) // PCI
@@ -33,12 +37,86 @@ Device (MCHC)
OperationRegion (MCHP, PCI_Config, 0x00, 0x100)
Field (MCHP, DWordAcc, NoLock, Preserve)
{
+ Offset(0x40), // EPBAR (0:0:0:40)
+ EPEN, 1, // Enable
+ , 11,
+ EPBR, 20, // EPBAR [31:12]
+
+ Offset(0x48), // MCHBAR (0:0:0:48)
+ MHEN, 1, // Enable
+ , 14,
+ MHBR, 17, // MCHBAR [31:15]
+
+ Offset(0x54), // DEVEN (0:0:0:54)
+ D0EN, 1, // DEV0 Enable
+ D1F2, 1, // DEV1 FUN2 Enable
+ D1F1, 1, // DEV1 FUN1 Enable
+ D1F0, 1, // DEV1 FUN0 Enable
+
+ Offset(0x60), // PCIEXBAR (0:0:0:60)
+ PXEN, 1, // Enable
+ PXSZ, 2, // PCI Express Size
+ , 23,
+ PXBR, 6, // PCI Express BAR [31:26]
+
+ Offset(0x68), // DMIBAR (0:0:0:68)
+ DIEN, 1, // Enable
+ , 11,
+ DIBR, 20, // DMIBAR [31:12]
+
Offset (0x70), // ME Base Address
- MEBA, 64,
+ MEBA, 64,
+
+ Offset(0x80), // PAM0 Register (0:0:0:80)
+ PMLK, 1, // PAM Lock bit.
+ , 3,
+ PM0H, 2, // PAM 0, High Nibble
+ , 2,
+
+ Offset(0x81), // PAM1 Register (0:0:0:81)
+ PM1L, 2, // PAM1, Low Nibble
+ , 2,
+ PM1H, 2, // PAM1, High Nibble
+ , 2,
+
+ Offset(0x82), // PAM2 Register (0:0:0:82)
+ PM2L, 2, // PAM2, Low Nibble
+ , 2,
+ PM2H, 2, // PAM2, High Nibble
+ , 2,
+
+ Offset(0x83), // PAM3 Register (0:0:0:83)
+ PM3L, 2, // PAM3, Low Nibble
+ , 2,
+ PM3H, 2, // PAM3, High Nibble
+ , 2,
+
+ Offset(0x84), // PAM4 Register (0:0:0:84)
+ PM4L, 2, // PAM4, Low Nibble
+ , 2,
+ PM4H, 2, // PAM4, High Nibble
+ , 2,
+
+ Offset(0x85), // PAM5 Register (0:0:0:85)
+ PM5L, 2, // PAM5, Low Nibble
+ , 2,
+ PM5H, 2, // PAM5, High Nibble
+ , 2,
+
+ Offset(0x86), // PAM6 Register (0:0:0:86)
+ PM6L, 2, // PAM6, Low Nibble
+ , 2,
+ PM6H, 2, // PAM6, High Nibble
+ , 2,
+
Offset (0xa0), // Top of Used Memory
- TOM, 64,
+ TOM, 64,
+
+ Offset (0xa8), // Top of Upper Used Memory
+ TUUD, 64,
+
Offset (0xbc), // Top of Low Used Memory
- TLUD, 32,
+ TLUD, 32,
}
}
@@ -48,161 +126,311 @@ Method (_CRS, 0, Serialized)
{
Name (MCRS, ResourceTemplate()
{
- // Bus Numbers
+ /* Bus Numbers */
WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
0x0000, 0x0000, 0x00ff, 0x0000, 0x0100,,, PB00)
- // IO Region 0
+ /* IO Region 0 */
DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
0x0000, 0x0000, 0x0cf7, 0x0000, 0x0cf8,,, PI00)
- // PCI Config Space
+ /* PCI Config Space */
Io (Decode16, 0x0cf8, 0x0cf8, 0x0001, 0x0008)
- // IO Region 1
+ /* IO Region 1 */
DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
0x0000, 0x0d00, 0xffff, 0x0000, 0xf300,,, PI01)
- // VGA memory (0xa0000-0xbffff)
+ /* VGA memory (0xa0000-0xbffff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000a0000, 0x000bffff, 0x00000000,
0x00020000,,, ASEG)
- // OPROM reserved (0xc0000-0xc3fff)
+ /* OPROM reserved (0xc0000-0xc3fff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000c0000, 0x000c3fff, 0x00000000,
0x00004000,,, OPR0)
- // OPROM reserved (0xc4000-0xc7fff)
+ /* OPROM reserved (0xc4000-0xc7fff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000c4000, 0x000c7fff, 0x00000000,
0x00004000,,, OPR1)
- // OPROM reserved (0xc8000-0xcbfff)
+ /* OPROM reserved (0xc8000-0xcbfff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000c8000, 0x000cbfff, 0x00000000,
0x00004000,,, OPR2)
- // OPROM reserved (0xcc000-0xcffff)
+ /* OPROM reserved (0xcc000-0xcffff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000cc000, 0x000cffff, 0x00000000,
0x00004000,,, OPR3)
- // OPROM reserved (0xd0000-0xd3fff)
+ /* OPROM reserved (0xd0000-0xd3fff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000d0000, 0x000d3fff, 0x00000000,
0x00004000,,, OPR4)
- // OPROM reserved (0xd4000-0xd7fff)
+ /* OPROM reserved (0xd4000-0xd7fff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000d4000, 0x000d7fff, 0x00000000,
0x00004000,,, OPR5)
- // OPROM reserved (0xd8000-0xdbfff)
+ /* OPROM reserved (0xd8000-0xdbfff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000d8000, 0x000dbfff, 0x00000000,
0x00004000,,, OPR6)
- // OPROM reserved (0xdc000-0xdffff)
+ /* OPROM reserved (0xdc000-0xdffff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000dc000, 0x000dffff, 0x00000000,
0x00004000,,, OPR7)
- // BIOS Extension (0xe0000-0xe3fff)
+ /* BIOS Extension (0xe0000-0xe3fff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000e0000, 0x000e3fff, 0x00000000,
0x00004000,,, ESG0)
- // BIOS Extension (0xe4000-0xe7fff)
+ /* BIOS Extension (0xe4000-0xe7fff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000e4000, 0x000e7fff, 0x00000000,
0x00004000,,, ESG1)
- // BIOS Extension (0xe8000-0xebfff)
+ /* BIOS Extension (0xe8000-0xebfff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000e8000, 0x000ebfff, 0x00000000,
0x00004000,,, ESG2)
- // BIOS Extension (0xec000-0xeffff)
+ /* BIOS Extension (0xec000-0xeffff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000ec000, 0x000effff, 0x00000000,
0x00004000,,, ESG3)
- // System BIOS (0xf0000-0xfffff)
+ /* System BIOS (0xf0000-0xfffff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0x000f0000, 0x000fffff, 0x00000000,
0x00010000,,, FSEG)
- // PCI Memory Region (Top of memory-CONFIG_MMCONF_BASE_ADDRESS)
+ /* PCI Memory Region (TOLUD - 0xdfffffff) */
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ NonCacheable, ReadWrite,
+ 0x00000000, 0x00000000, 0xdfffffff, 0x00000000,
+ 0xE0000000,,, PM01)
+
+ /* PCI Memory Region (TOUUD - (TOUUD + ABOVE_4G_MMIO_SIZE)) */
+ QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ NonCacheable, ReadWrite,
+ 0x00000000, 0x10000, 0x1ffff, 0x00000000,
+ 0x10000,,, PM02)
+
+ /* PCH reserved resource (0xfd000000-0xfe7fffff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
- 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- 0x00000000,,, PM01)
+ 0x00000000, 0xfd000000, 0xfe7fffff, 0x00000000,
+ 0x1800000,,, PM03)
- // TPM Area (0xfed40000-0xfed44fff)
+ /* TPM Area (0xfed40000-0xfed44fff) */
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
Cacheable, ReadWrite,
0x00000000, 0xfed40000, 0xfed44fff, 0x00000000,
0x00005000,,, TPMR)
})
- // Find PCI resource area in MCRS
- CreateDwordField(MCRS, PM01._MIN, PMIN)
- CreateDwordField(MCRS, PM01._MAX, PMAX)
- CreateDwordField(MCRS, PM01._LEN, PLEN)
+ /* Find PCI resource area in MCRS */
+ CreateDwordField (MCRS, PM01._MIN, PMIN)
+ CreateDwordField (MCRS, PM01._MAX, PMAX)
+ CreateDwordField (MCRS, PM01._LEN, PLEN)
- // Fix up PCI memory region
- // Start with Top of Lower Usable DRAM
+ /*
+ * Fix up PCI memory region
+ * Start with Top of Lower Usable DRAM
+ */
Store (^MCHC.TLUD, Local0)
Store (^MCHC.MEBA, Local1)
- // Check if ME base is equal
+ /* Check if ME base is equal */
If (LEqual (Local0, Local1)) {
- // Use Top Of Memory instead
+ /* Use Top Of Memory instead */
Store (^MCHC.TOM, Local0)
}
Store (Local0, PMIN)
- Store (Subtract(CONFIG_MMCONF_BASE_ADDRESS, 1), PMAX)
- Add(Subtract(PMAX, PMIN), 1, PLEN)
+ Add (Subtract (PMAX, PMIN), 1, PLEN)
+
+ /* Patch PM02 range based on Memory Size */
+ CreateQwordField (MCRS, PM02._MIN, MMIN)
+ CreateQwordField (MCRS, PM02._MAX, MMAX)
+ CreateQwordField (MCRS, PM02._LEN, MLEN)
+
+ Store (^MCHC.TUUD, Local0)
+
+ If (LLessEqual (Local0, BASE_32GB))
+ {
+ Store (BASE_32GB, MMIN)
+ Store (SIZE_16GB, MLEN)
+ }
+ else
+ {
+ Store (0, MMIN)
+ Store (0, MLEN)
+ }
+ Subtract (Add (MMIN, MLEN), 1, MMAX)
Return (MCRS)
}
+Name (EP_B, 0) /* to store EP BAR */
+Name (MH_B, 0) /* to store MCH BAR */
+Name (PC_B, 0) /* to store PCIe BAR */
+Name (PC_L, 0) /* to store PCIe BAR Length */
+Name (DM_B, 0) /* to store DMI BAR */
+
+/* Get MCH BAR */
+Method (GMHB,0,Serialized)
+{
+ if (LEqual (MH_B,0))
+ {
+ ShiftLeft (\_SB.PCI0.MCHC.MHBR, 15, MH_B)
+ }
+ Return (MH_B)
+}
+
+/* Get EP BAR */
+Method (GEPB,0,Serialized)
+{
+ if (LEqual (EP_B,0))
+ {
+ ShiftLeft (\_SB.PCI0.MCHC.EPBR, 12, EP_B)
+ }
+ Return (EP_B)
+}
+
+/* Get PCIe BAR */
+Method (GPCB,0,Serialized)
+{
+ if (LEqual (PC_B,0))
+ {
+ ShiftLeft (\_SB.PCI0.MCHC.PXBR, 26, PC_B)
+ }
+ Return (PC_B)
+}
+
+/* Get PCIe Length */
+Method (GPCL,0,Serialized)
+{
+ if (LEqual (PC_L,0))
+ {
+ ShiftRight (0x10000000, \_SB.PCI0.MCHC.PXSZ, PC_L)
+ }
+ Return (PC_L)
+}
+
+/* Get DMI BAR */
+Method (GDMB,0,Serialized)
+{
+ if (LEqual (DM_B,0))
+ {
+ ShiftLeft (\_SB.PCI0.MCHC.DIBR, 12, DM_B)
+ }
+ Return (DM_B)
+}
+
/* PCI Device Resource Consumption */
Device (PDRC)
{
Name (_HID, EISAID("PNP0C02"))
Name (_UID, 1)
- Name (PDRS, ResourceTemplate() {
- Memory32Fixed (ReadWrite, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE)
- Memory32Fixed (ReadWrite, MCH_BASE_ADDRESS, MCH_BASE_SIZE)
- Memory32Fixed (ReadWrite, DMI_BASE_ADDRESS, DMI_BASE_SIZE)
- Memory32Fixed (ReadWrite, EP_BASE_ADDRESS, EP_BASE_SIZE)
- Memory32Fixed (ReadWrite, MCFG_BASE_ADDRESS, MCFG_BASE_SIZE)
- Memory32Fixed (ReadWrite, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE)
- Memory32Fixed (ReadWrite, GDXC_BASE_ADDRESS, GDXC_BASE_SIZE)
+ Name (BUF0,ResourceTemplate()
+ {
+ /* MCH BAR _BAS will be updated in _CRS below according to
+ * B0:D0:F0:Reg.48h
+ */
+ Memory32Fixed (ReadWrite, 0, 0x08000, MCHB)
+
+ /* DMI BAR _BAS will be updated in _CRS below according to
+ * B0:D0:F0:Reg.68h
+ */
+ Memory32Fixed (ReadWrite, 0, 0x01000, DMIB)
+
+ /* EP BAR _BAS will be updated in _CRS below according to
+ * B0:D0:F0:Reg.40h
+ */
+ Memory32Fixed (ReadWrite, 0, 0x01000, EGPB)
+
+ /* PCI Express BAR _BAS and _LEN will be updated in
+ * _CRS below according to B0:D0:F0:Reg.60h
+ */
+ Memory32Fixed (ReadWrite, 0, 0, PCIX)
+
+ /* MISC ICH TTT base address reserved for the
+ * TxT module use.
+ */
+ Memory32Fixed (ReadWrite, 0xFED20000, 0x20000)
+
+ /* VTD engine memory range.
+ * Check if the hard code meets the real configuration.
+ */
+ Memory32Fixed (ReadOnly, 0xFED90000, 0x00004000)
+
+ /* MISC ICH. Check if the hard code meets the
+ * real configuration.
+ */
+ Memory32Fixed (ReadWrite, 0xFED45000, 0x4B000, TPMM)
+
+ /* FLASH range */
+ Memory32Fixed (ReadOnly, 0xFF000000, 0x1000000, FIOH) /* 16MB */
+
+ /* Local APIC range(0xFEE0_0000 to 0xFEEF_FFFF) */
+ Memory32Fixed (ReadOnly, 0xFEE00000, 0x100000, LIOH)
+
+ /* Reserve HPET address decode range */
+ Memory32Fixed (ReadWrite, 0, 0, HPET)
+
+ /* Debug Base Address
+ * Base Address for ACPI debug output memory buffer
+ */
+ Memory32Fixed (ReadWrite, 0, 0, DBAD)
})
// Current Resource Settings
Method (_CRS, 0, Serialized)
{
- Return (PDRS)
+ CreateDwordField (BUF0, ^MCHB._BAS, MBR0)
+ Store (\_SB.PCI0.GMHB(), MBR0)
+
+ CreateDwordField (BUF0, ^DMIB._BAS, DBR0)
+ Store (\_SB.PCI0.GDMB(), DBR0)
+
+ CreateDwordField (BUF0, ^EGPB._BAS, EBR0)
+ Store (\_SB.PCI0.GEPB(), EBR0)
+
+ CreateDwordField (BUF0, ^PCIX._BAS, XBR0)
+ Store (\_SB.PCI0.GPCB(), XBR0)
+
+ CreateDwordField (BUF0, ^PCIX._LEN, XSZ0)
+ Store (\_SB.PCI0.GPCL(), XSZ0)
+
+ CreateDwordField (BUF0, ^HPET._BAS, HBAS)
+ CreateDwordField (BUF0, ^HPET._LEN, HLEN)
+ Store (0xfed00000, HBAS)
+ Store (0x400, HLEN)
+
+ Return (BUF0)
}
}
diff --git a/src/soc/intel/skylake/acpi/xhci.asl b/src/soc/intel/skylake/acpi/xhci.asl
index c41275ccd2..f0ee414b52 100644
--- a/src/soc/intel/skylake/acpi/xhci.asl
+++ b/src/soc/intel/skylake/acpi/xhci.asl
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,17 +16,17 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-// XHCI Controller 0:14.0
+/* XHCI Controller 0:14.0 */
Device (XHCI)
{
Name (_ADR, 0x00140000)
- Name (PLSD, 5) // Port Link State - RxDetect
- Name (PLSP, 7) // Port Link State - Polling
+ Name (PLSD, 5) /* Port Link State - RxDetect */
+ Name (PLSP, 7) /* Port Link State - Polling */
OperationRegion (XPRT, PCI_Config, 0x00, 0x100)
Field (XPRT, AnyAcc, NoLock, Preserve)
@@ -34,68 +35,74 @@ Device (XHCI)
DVID, 16,
Offset (0x10),
, 16,
- XMEM, 16, // MEM_BASE
- Offset (0x40),
- , 11,
- SWAI, 1,
- , 20,
- Offset (0x44),
- , 12,
- SAIP, 2,
- , 18,
+ XMEM, 16, /* MEM_BASE */
Offset (0x74),
D0D3, 2,
, 6,
- PMEE, 1, // PME_EN
+ PMEE, 1, /* PME_EN */
, 6,
- PMES, 1, // PME_STS
+ PMES, 1, /* PME_STS */
+ Offset (0xA8),
+ , 13,
+ MW13, 1,
+ MW14, 1,
+ , 17,
Offset (0xb0),
, 13,
MB13, 1,
MB14, 1,
+ , 17,
Offset (0xd0),
- PR2R, 32, // USB2PR
- PR2M, 32, // USB2PRM
- PR3R, 32, // USB3PR
- PR3M, 32, // USB3PRM
+ PR2, 32, /* USB2PR */
+ PR2M, 32, /* USB2PRM */
+ PR3, 32, /* USB3PR */
+ PR3M, 32, /* USB3PRM */
+ }
+
+ Method (USRA,0){
+ Return(11)
}
- // Clear status bits
+ Method (SSPA,0){
+ Return (13)
+ }
+
+ /* Clear status bits */
Method (LPCL, 0, Serialized)
{
OperationRegion (XREG, SystemMemory,
- ShiftLeft (^XMEM, 16), 0x600)
+ ShiftLeft (^XMEM, 16), 0x600)
Field (XREG, DWordAcc, Lock, Preserve)
{
- Offset (0x510), // PORTSCNUSB3[0]
+ Offset (0x510), /* PORTSCNUSB3[0]*/
PSC0, 32,
- Offset (0x520), // PORTSCNUSB3[1]
+ Offset (0x520), /* PORTSCNUSB3[1]*/
PSC1, 32,
- Offset (0x530), // PORTSCNUSB3[2]
+ Offset (0x530), /* PORTSCNUSB3[2]*/
PSC2, 32,
- Offset (0x540), // PORTSCNUSB3[3]
+ Offset (0x540), /* PORTSCNUSB3[3]*/
PSC3, 32,
}
- // Port Enabled/Disabled (Bit 1)
+ /* Port Enabled/Disabled (Bit 1)*/
Name (PEDB, ShiftLeft (1, 1))
- // Change Status (Bits 23:17)
+ /* Change Status (Bits 23:17)*/
Name (CHST, ShiftLeft (0x7f, 17))
- // Port 0
+ /* Port 0 */
And (PSC0, Not (PEDB), Local0)
Or (Local0, CHST, PSC0)
- // Port 1
+ /* Port 1 */
And (PSC1, Not (PEDB), Local0)
Or (Local0, CHST, PSC1)
- // Port 2
+ /* Port 2 */
And (PSC2, Not (PEDB), Local0)
Or (Local0, CHST, PSC2)
- // Port 3
+ /* Port 3 */
And (PSC3, Not (PEDB), Local0)
Or (Local0, CHST, PSC3)
}
@@ -148,7 +155,7 @@ Device (XHCI)
WPR4, 1, // [31] Warm Port Reset
}
- // Wait for all powered ports to finish polling
+ /* Wait for all powered ports to finish polling*/
Store (10, Local0)
While (LOr (LOr (LAnd (LEqual (PPR1, 1), LEqual (PLS1, PLSP)),
LAnd (LEqual (PPR2, 1), LEqual (PLS2, PLSP))),
@@ -162,13 +169,13 @@ Device (XHCI)
Stall (10)
}
- // For each USB3 Port:
- // If port is disconnected (PLS=5 PP=1 CSC=0)
- // 1) Issue warm reset (WPR=1)
- // 2) Poll for warm reset complete (WRC=0)
- // 3) Write 1 to port status to clear
+ /* For each USB3 Port:*/
+ /* If port is disconnected (PLS=5 PP=1 CSC=0)*/
+ /* 1) Issue warm reset (WPR=1)*/
+ /* 2) Poll for warm reset complete (WRC=0)*/
+ /* 3) Write 1 to port status to clear*/
- // Local# indicate if port is reset
+ /* Local# indicate if port is reset*/
Store (0, Local1)
Store (0, Local2)
Store (0, Local3)
@@ -176,26 +183,26 @@ Device (XHCI)
If (LAnd (LEqual (PLS1, PLSD),
LAnd (LEqual (CSC1, 0), LEqual (PPR1, 1)))) {
- Store (1, WPR1) // Issue warm reset
+ Store (1, WPR1) /* Issue warm reset*/
Store (1, Local1)
}
If (LAnd (LEqual (PLS2, PLSD),
LAnd (LEqual (CSC2, 0), LEqual (PPR2, 1)))) {
- Store (1, WPR2) // Issue warm reset
+ Store (1, WPR2) /* Issue warm reset*/
Store (1, Local2)
}
If (LAnd (LEqual (PLS3, PLSD),
LAnd (LEqual (CSC3, 0), LEqual (PPR3, 1)))) {
- Store (1, WPR3) // Issue warm reset
+ Store (1, WPR3) /* Issue warm reset*/
Store (1, Local3)
}
If (LAnd (LEqual (PLS4, PLSD),
LAnd (LEqual (CSC4, 0), LEqual (PPR4, 1)))) {
- Store (1, WPR4) // Issue warm reset
+ Store (1, WPR4) /* Issue warm reset*/
Store (1, Local4)
}
- // Poll for warm reset complete on all ports that were reset
+ /* Poll for warm reset complete on all ports that were reset*/
Store (10, Local0)
While (LOr (LOr (LAnd (LEqual (Local1, 1), LEqual (WRC1, 0)),
LAnd (LEqual (Local2, 1), LEqual (WRC2, 0))),
@@ -209,7 +216,7 @@ Device (XHCI)
Stall (10)
}
- // Clear status bits in all ports
+ /* Clear status bits in all ports */
LPCL ()
}
@@ -220,152 +227,95 @@ Device (XHCI)
Method (_PS0, 0, Serialized)
{
- If (LEqual (^DVID, 0xFFFF)) {
- Return ()
- }
- If (LOr (LEqual (^XMEM, 0xFFFF), LEqual (^XMEM, 0x0000))) {
- Return ()
- }
-
- OperationRegion (XREG, SystemMemory,
- Add (ShiftLeft (^XMEM, 16), 0x8000), 0x200)
- Field (XREG, DWordAcc, Lock, Preserve)
- {
- Offset (0x0e0), // AUX Reset Control 1
- , 15,
- AX15, 1,
- Offset (0x154), // AUX Domain PM Control Register 2
- , 31,
- CLK2, 1,
- Offset (0x16c), // AUX Clock Control
- , 2,
- CLK0, 1,
- , 11,
- CLK1, 1, // USB3 Port Aux/Core Clock Gating Enable
- }
-
- // If device is in D3, set back to D0
- Store (^D0D3, Local0)
- if (LEqual (Local0, 3)) {
- Store (0, ^D0D3)
- }
-
- if (LNot (\ISWP())) {
- // Clear PCI 0xB0[14:13]
- Store (0, ^MB13)
- Store (0, ^MB14)
-
- // Clear MMIO 0x816C[14,2]
- Store (0, CLK0)
- Store (0, CLK1)
-
- // Set MMIO 0x8154[31]
- Store (1, CLK2)
-
- // Handle per-port reset if needed
- LPS0 ()
-
- // Set MMIO 0x80e0[15]
- Store (1, AX15)
-
- // Clear PCI CFG offset 0x40[11]
- Store (0, ^SWAI)
-
- // Clear PCI CFG offset 0x44[13:12]
- Store (0, ^SAIP)
- }
-
- Return ()
}
-
Method (_PS3, 0, Serialized)
{
- If (LEqual (^DVID, 0xFFFF)) {
- Return ()
- }
- If (LOr (LEqual (^XMEM, 0xFFFF), LEqual (^XMEM, 0x0000))) {
- Return ()
- }
-
- OperationRegion (XREG, SystemMemory,
- Add (ShiftLeft (^XMEM, 16), 0x8000), 0x200)
- Field (XREG, DWordAcc, Lock, Preserve)
- {
- Offset (0x0e0), // AUX Reset Control 1
- , 15,
- AX15, 1,
- Offset (0x154), // AUX Domain PM Control Register 2
- , 31,
- CLK2, 1,
- Offset (0x16c), // AUX Clock Control
- , 2,
- CLK0, 1,
- , 11,
- CLK1, 1, // USB3 Port Aux/Core Clock Gating Enable
- }
-
- Store (1, ^PMES) // Clear PME Status
- Store (1, ^PMEE) // Enable PME
-
- // If device is in D3, set back to D0
- Store (^D0D3, Local0)
- if (LEqual (Local0, 3)) {
- Store (0, ^D0D3)
- }
-
- if (LNot (\ISWP())) {
- // Set PCI 0xB0[14:13]
- Store (1, ^MB13)
- Store (1, ^MB14)
-
- // Set MMIO 0x816C[14,2]
- Store (1, CLK0)
- Store (1, CLK1)
-
- // Clear MMIO 0x8154[31]
- Store (0, CLK2)
-
- // Clear MMIO 0x80e0[15]
- Store (0, AX15)
-
- // Set PCI CFG offset 0x40[11]
- Store (1, ^SWAI)
-
- // Set PCI CFG offset 0x44[13:12]
- Store (1, ^SAIP)
- }
-
- // Put device in D3
- Store (3, ^D0D3)
-
- Return ()
}
Name (_PRW, Package(){ 0x6d, 3 })
- // Leave USB ports on for to allow Wake from USB
+ /* Leave USB ports on for to allow Wake from USB */
- Method(_S3D,0) // Highest D State in S3 State
+ Method (_S3D,0) /* Highest D State in S3 State*/
{
Return (3)
}
- Method(_S4D,0) // Highest D State in S4 State
+ Method (_S4D,0) /* Highest D State in S4 State*/
{
Return (3)
}
-
- Device (HUB7)
+ Device (HS01)
{
- Name (_ADR, 0x00000000)
-
- // How many are there?
- Device (PRT1) { Name (_ADR, 1) } // USB Port 0
- Device (PRT2) { Name (_ADR, 2) } // USB Port 1
- Device (PRT3) { Name (_ADR, 3) } // USB Port 2
- Device (PRT4) { Name (_ADR, 4) } // USB Port 3
- Device (PRT5) { Name (_ADR, 5) } // USB Port 4
- Device (PRT6) { Name (_ADR, 6) } // USB Port 5
+ Name(_ADR, 0x01)
+ }
+ Device (HS02)
+ {
+ Name(_ADR, 0x02)
+ }
+ Device (HS03)
+ {
+ Name(_ADR, 0x03)
+ }
+ Device (HS04)
+ {
+ Name(_ADR, 0x04)
+ }
+ Device (HS05)
+ {
+ Name(_ADR, 0x05)
+ }
+ Device (HS06)
+ {
+ Name(_ADR, 0x06)
+ }
+ Device (HS07)
+ {
+ Name(_ADR, 0x07)
+ }
+ Device (HS08)
+ {
+ Name(_ADR, 0x08)
+ }
+ Device (HS09)
+ {
+ Name(_ADR, 0x09)
+ }
+ Device (HS10)
+ {
+ Name(_ADR, 0x10)
+ }
+ Device (USR1)
+ {
+ Method(_ADR) { Return (Add(USRA(),0)) }
+ }
+ Device (USR2)
+ {
+ Method(_ADR) { Return (Add(USRA(),1)) }
+ }
+ Device (SS01)
+ {
+ Method(_ADR) { Return (Add(SSPA(),0)) }
+ }
+ Device (SS02)
+ {
+ Method(_ADR) { Return (Add(SSPA(),1)) }
+ }
+ Device (SS03)
+ {
+ Method(_ADR) { Return (Add(SSPA(),2)) }
+ }
+ Device (SS04)
+ {
+ Method(_ADR) { Return (Add(SSPA(),3)) }
+ }
+ Device (SS05)
+ {
+ Method(_ADR) { Return (Add(SSPA(),4)) }
+ }
+ Device (SS06)
+ {
+ Method(_ADR) { Return (Add(SSPA(),5)) }
}
}
diff --git a/src/soc/intel/skylake/adsp.c b/src/soc/intel/skylake/adsp.c
deleted file mode 100644
index 1a7cca7975..0000000000
--- a/src/soc/intel/skylake/adsp.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <cbmem.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <arch/io.h>
-#include <delay.h>
-#include <soc/adsp.h>
-#include <soc/device_nvs.h>
-#include <soc/iobp.h>
-#include <soc/nvs.h>
-#include <soc/pch.h>
-#include <soc/ramstage.h>
-#include <soc/rcba.h>
-#include <soc/intel/broadwell/chip.h>
-
-static void adsp_init(struct device *dev)
-{
- config_t *config = dev->chip_info;
- struct resource *bar0, *bar1;
- u32 tmp32;
-
- /* Ensure memory and bus master are enabled */
- tmp32 = pci_read_config32(dev, PCI_COMMAND);
- tmp32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config32(dev, PCI_COMMAND, tmp32);
-
- /* Find BAR0 and BAR1 */
- bar0 = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (!bar0)
- return;
- bar1 = find_resource(dev, PCI_BASE_ADDRESS_1);
- if (!bar1)
- return;
-
- /*
- * Set LTR value in DSP shim LTR control register to 3ms
- * SNOOP_REQ[13]=1b SNOOP_SCALE[12:10]=100b (1ms) SNOOP_VAL[9:0]=3h
- */
- tmp32 = pch_is_wpt() ? ADSP_SHIM_BASE_WPT : ADSP_SHIM_BASE_LPT;
- write32(res2mmio(bar0, tmp32 + ADSP_SHIM_LTRC, 0),
- ADSP_SHIM_LTRC_VALUE);
-
- /* Program VDRTCTL2 D19:F0:A8[31:0] = 0x00000fff */
- pci_write_config32(dev, ADSP_PCI_VDRTCTL2, ADSP_VDRTCTL2_VALUE);
-
- /* Program ADSP IOBP VDLDAT1 to 0x040100 */
- pch_iobp_write(ADSP_IOBP_VDLDAT1, ADSP_VDLDAT1_VALUE);
-
- /* Set D3 Power Gating Enable in D19:F0:A0 based on PCH type */
- tmp32 = pci_read_config32(dev, ADSP_PCI_VDRTCTL0);
- if (pch_is_wpt()) {
- if (config->adsp_d3_pg_enable) {
- tmp32 &= ~ADSP_VDRTCTL0_D3PGD_WPT;
- if (config->adsp_sram_pg_enable)
- tmp32 &= ~ADSP_VDRTCTL0_D3SRAMPGD_WPT;
- else
- tmp32 |= ADSP_VDRTCTL0_D3SRAMPGD_WPT;
- } else {
- tmp32 |= ADSP_VDRTCTL0_D3PGD_WPT;
- }
- } else {
- if (config->adsp_d3_pg_enable) {
- tmp32 &= ~ADSP_VDRTCTL0_D3PGD_LPT;
- if (config->adsp_sram_pg_enable)
- tmp32 &= ~ADSP_VDRTCTL0_D3SRAMPGD_LPT;
- else
- tmp32 |= ADSP_VDRTCTL0_D3SRAMPGD_LPT;
- } else {
- tmp32 |= ADSP_VDRTCTL0_D3PGD_LPT;
- }
- }
- pci_write_config32(dev, ADSP_PCI_VDRTCTL0, tmp32);
-
- /* Set PSF Snoop to SA, RCBA+0x3350[10]=1b */
- RCBA32_OR(0x3350, (1 << 10));
-
- /* Set DSP IOBP PMCTL 0x1e0=0x3f */
- pch_iobp_write(ADSP_IOBP_PMCTL, ADSP_PMCTL_VALUE);
-
- if (config->sio_acpi_mode) {
- /* Configure for ACPI mode */
- global_nvs_t *gnvs;
-
- printk(BIOS_INFO, "ADSP: Enable ACPI Mode IRQ3\n");
-
- /* Find ACPI NVS to update BARs */
- gnvs = (global_nvs_t *)cbmem_find(CBMEM_ID_ACPI_GNVS);
- if (!gnvs) {
- printk(BIOS_ERR, "Unable to locate Global NVS\n");
- return;
- }
-
- /* Save BAR0 and BAR1 to ACPI NVS */
- gnvs->dev.bar0[SIO_NVS_ADSP] = (u32)bar0->base;
- gnvs->dev.bar1[SIO_NVS_ADSP] = (u32)bar1->base;
- gnvs->dev.enable[SIO_NVS_ADSP] = 1;
-
- /* Set PCI Config Disable Bit */
- pch_iobp_update(ADSP_IOBP_PCICFGCTL, ~0, ADSP_PCICFGCTL_PCICD);
-
- /* Set interrupt de-assert/assert opcode override to IRQ3 */
- pch_iobp_write(ADSP_IOBP_VDLDAT2, ADSP_IOBP_ACPI_IRQ3);
-
- /* Enable IRQ3 in RCBA */
- RCBA32_OR(ACPIIRQEN, ADSP_ACPI_IRQEN);
-
- /* Set ACPI Interrupt Enable Bit */
- pch_iobp_update(ADSP_IOBP_PCICFGCTL, ~ADSP_PCICFGCTL_SPCBAD,
- ADSP_PCICFGCTL_ACPIIE);
-
- /* Put ADSP in D3hot */
- tmp32 = read32(res2mmio(bar1, PCH_PCS, 0));
- tmp32 |= PCH_PCS_PS_D3HOT;
- write32(res2mmio(bar1, PCH_PCS, 0), tmp32);
- } else {
- printk(BIOS_INFO, "ADSP: Enable PCI Mode IRQ23\n");
-
- /* Configure for PCI mode */
- pci_write_config32(dev, PCI_INTERRUPT_LINE, ADSP_PCI_IRQ);
-
- /* Clear ACPI Interrupt Enable Bit */
- pch_iobp_update(ADSP_IOBP_PCICFGCTL,
- ~(ADSP_PCICFGCTL_SPCBAD | ADSP_PCICFGCTL_ACPIIE), 0);
- }
-}
-
-static struct device_operations adsp_ops = {
- .read_resources = &pci_dev_read_resources,
- .set_resources = &pci_dev_set_resources,
- .enable_resources = &pci_dev_enable_resources,
- .init = &adsp_init,
- .ops_pci = &broadwell_pci_ops,
-};
-
-static const unsigned short pci_device_ids[] = {
- 0x9c36, /* LynxPoint */
- 0x9cb6, /* WildcatPoint */
- 0
-};
-
-static const struct pci_driver pch_adsp __pci_driver = {
- .ops = &adsp_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .devices = pci_device_ids,
-};
-
diff --git a/src/soc/intel/skylake/bootblock/Makefile.inc b/src/soc/intel/skylake/bootblock/Makefile.inc
index 2ca5a4569f..a31f588f58 100644
--- a/src/soc/intel/skylake/bootblock/Makefile.inc
+++ b/src/soc/intel/skylake/bootblock/Makefile.inc
@@ -1 +1 @@
-chipset_bootblock_inc += $(src)/soc/intel/broadwell/bootblock/timestamp.inc
+chipset_bootblock_inc += $(src)/soc/intel/skylake/bootblock/timestamp.inc
diff --git a/src/soc/intel/skylake/bootblock/cpu.c b/src/soc/intel/skylake/bootblock/cpu.c
index 3a47d13f0a..d4506e592a 100644
--- a/src/soc/intel/skylake/bootblock/cpu.c
+++ b/src/soc/intel/skylake/bootblock/cpu.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <stdint.h>
@@ -22,11 +23,18 @@
#include <cpu/x86/cache.h>
#include <cpu/x86/msr.h>
#include <cpu/x86/mtrr.h>
+#include <device/pci_def.h>
#include <arch/io.h>
-#include <halt.h>
#include <cpu/intel/microcode/microcode.c>
-#include <soc/rcba.h>
+#include <reset.h>
#include <soc/msr.h>
+#include <soc/pci_devs.h>
+#include <soc/spi.h>
+
+/* Soft Reset Data Register Bit 12 = MAX Boot Frequency */
+#define SPI_STRAP_MAX_FREQ (1<<12)
+/* Soft Reset Data Register Bit 6-11 = Flex Ratio */
+#define FLEX_RATIO_BIT 6
static void set_var_mtrr(
unsigned reg, unsigned base, unsigned size, unsigned type)
@@ -47,7 +55,6 @@ static void enable_rom_caching(void)
msr_t msr;
disable_cache();
- /* Why only top 4MiB ? */
set_var_mtrr(1, CACHE_ROM_BASE, CACHE_ROM_SIZE, MTRR_TYPE_WRPROT);
enable_cache();
@@ -68,10 +75,59 @@ static void bootblock_mdelay(int ms)
} while ((current.lo - start.lo) < target);
}
+static void set_pch_cpu_strap(u8 flex_ratio)
+{
+ device_t dev = PCH_DEV_SPI;
+ uint8_t *spibar = (void *)TEMP_SPI_BAR;
+ u32 ssl, ssms, soft_reset_data;
+ u8 pcireg;
+
+ /* Assign Resources to SPI Controller */
+ /* Clear BIT 1-2 SPI Command Register */
+ pcireg = pci_read_config8(dev, PCI_COMMAND);
+ pcireg &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ pci_write_config8(dev, PCI_COMMAND, pcireg);
+
+ /* Program Temporary BAR for SPI */
+ pci_write_config32(dev, PCH_SPI_BASE_ADDRESS, TEMP_SPI_BAR);
+
+ /* Enable Bus Master and MMIO Space */
+ pcireg = pci_read_config8(dev, PCI_COMMAND);
+ pcireg |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config8(dev, PCI_COMMAND, pcireg);
+
+ /* Set Strap Lock Disable*/
+ ssl = read32(spibar + SPIBAR_RESET_LOCK);
+ ssl |= SPIBAR_RESET_LOCK_DISABLE;
+ write32(spibar + SPIBAR_RESET_LOCK, ssl);
+
+ /* Soft Reset Data Register Bit 12 = MAX Boot Frequency
+ * Bit 6-11 = Flex Ratio
+ * Soft Reset Data register located at SPIBAR0 offset 0xF8[0:15].
+ */
+ soft_reset_data = SPI_STRAP_MAX_FREQ;
+ soft_reset_data |= (flex_ratio << FLEX_RATIO_BIT);
+ write32(spibar + SPIBAR_RESET_DATA, soft_reset_data);
+
+ /* Set Strap Mux Select set to '1' */
+ ssms = read32(spibar + SPIBAR_RESET_CTRL);
+ ssms |= SPIBAR_RESET_CTRL_SSMC;
+ write32(spibar + SPIBAR_RESET_CTRL, ssms);
+
+ /* Set Strap Lock Enable*/
+ ssl = read32(spibar + SPIBAR_RESET_LOCK);
+ ssl |= SPIBAR_RESET_LOCK_ENABLE;
+ write32(spibar + SPIBAR_RESET_LOCK, ssl);
+
+ /* Disable SPI Controller MMIO space */
+ pcireg = pci_read_config8(dev, PCI_COMMAND);
+ pcireg &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ pci_write_config8(dev, PCI_COMMAND, pcireg);
+}
+
static void set_flex_ratio_to_tdp_nominal(void)
{
msr_t flex_ratio, msr;
- u32 soft_reset;
u8 nominal_ratio;
/* Check for Flex Ratio support */
@@ -98,23 +154,14 @@ static void set_flex_ratio_to_tdp_nominal(void)
flex_ratio.lo |= FLEX_RATIO_LOCK;
wrmsr(MSR_FLEX_RATIO, flex_ratio);
- /* Set flex ratio in soft reset data register bits 11:6.
- * RCBA region is enabled in southbridge bootblock */
- soft_reset = RCBA32(SOFT_RESET_DATA);
- soft_reset &= ~(0x3f << 6);
- soft_reset |= (nominal_ratio & 0x3f) << 6;
- RCBA32(SOFT_RESET_DATA) = soft_reset;
-
- /* Set soft reset control to use register value */
- RCBA32_OR(SOFT_RESET_CTRL, 1);
+ /* Set PCH Soft Reset Data Register with new Flex Ratio */
+ set_pch_cpu_strap(nominal_ratio);
/* Delay before reset to avoid potential TPM lockout */
bootblock_mdelay(30);
- /* Issue warm reset, will be "CPU only" due to soft reset data */
- outb(0x0, 0xcf9);
- outb(0x6, 0xcf9);
- halt();
+ /* Issue soft reset, will be "CPU only" due to soft reset data */
+ soft_reset();
}
static void check_for_clean_reset(void)
@@ -122,14 +169,13 @@ static void check_for_clean_reset(void)
msr_t msr;
msr = rdmsr(MTRRdefType_MSR);
- /* Use the MTRR default type MSR as a proxy for detecting INIT#.
+ /*
+ * Use the MTRR default type MSR as a proxy for detecting INIT#.
* Reset the system if any known bits are set in that MSR. That is
- * an indication of the CPU not being properly reset. */
- if (msr.lo & (MTRRdefTypeEn | MTRRdefTypeFixEn)) {
- outb(0x0, 0xcf9);
- outb(0x6, 0xcf9);
- halt();
- }
+ * an indication of the CPU not being properly reset.
+ */
+ if (msr.lo & (MTRRdefTypeEn | MTRRdefTypeFixEn))
+ soft_reset();
}
static void bootblock_cpu_init(void)
diff --git a/src/soc/intel/skylake/bootblock/pch.c b/src/soc/intel/skylake/bootblock/pch.c
index 2fa722097c..9f256e3a95 100644
--- a/src/soc/intel/skylake/bootblock/pch.c
+++ b/src/soc/intel/skylake/bootblock/pch.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,14 +15,12 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-
#include <arch/io.h>
#include <soc/iomap.h>
#include <soc/lpc.h>
#include <soc/pci_devs.h>
-#include <soc/rcba.h>
#include <soc/spi.h>
/*
@@ -29,51 +28,13 @@
*/
static void enable_spi_prefetch(void)
{
- u8 reg8 = pci_read_config8(PCH_DEV_LPC, 0xdc);
+ u8 reg8 = pci_read_config8(PCH_DEV_SPI, 0xdc);
reg8 &= ~(3 << 2);
reg8 |= (2 << 2); /* Prefetching and Caching Enabled */
- pci_write_config8(PCH_DEV_LPC, 0xdc, reg8);
-}
-
-
-static void map_rcba(void)
-{
- pci_write_config32(PCH_DEV_LPC, RCBA, RCBA_BASE_ADDRESS | 1);
-}
-
-static void enable_port80_on_lpc(void)
-{
- /* Enable port 80 POST on LPC. The chipset does this by default,
- * but it doesn't appear to hurt anything. */
- u32 gcs = RCBA32(GCS);
- gcs = gcs & ~0x4;
- RCBA32(GCS) = gcs;
-}
-
-static void set_spi_speed(void)
-{
- u32 fdod;
- u8 ssfc;
-
- /* Observe SPI Descriptor Component Section 0 */
- SPIBAR32(SPIBAR_FDOC) = 0x1000;
-
- /* Extract the Write/Erase SPI Frequency from descriptor */
- fdod = SPIBAR32(SPIBAR_FDOD);
- fdod >>= 24;
- fdod &= 7;
-
- /* Set Software Sequence frequency to match */
- ssfc = SPIBAR8(SPIBAR_SSFC + 2);
- ssfc &= ~7;
- ssfc |= fdod;
- SPIBAR8(SPIBAR_SSFC + 2) = ssfc;
+ pci_write_config8(PCH_DEV_SPI, 0xdc, reg8);
}
static void bootblock_southbridge_init(void)
{
- map_rcba();
enable_spi_prefetch();
- enable_port80_on_lpc();
- set_spi_speed();
}
diff --git a/src/soc/intel/skylake/bootblock/systemagent.c b/src/soc/intel/skylake/bootblock/systemagent.c
index 15e7fc88b4..6f029f0053 100644
--- a/src/soc/intel/skylake/bootblock/systemagent.c
+++ b/src/soc/intel/skylake/bootblock/systemagent.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/io.h>
@@ -32,7 +33,7 @@ static void bootblock_northbridge_init(void)
* MCFG. This code also assumes that bootblock_northbridge_init() is
* the first thing called in the non-asm boot block code. The final
* assumption is that no assembly code is using the
- * CONFIG_MMCONF_SUPPORT_DEFAULT option to do PCI config accesses.
+ * CONFIG_MMCONF_SUPPORT_DEFAULT option to do PCI config acceses.
*
* The PCIEXBAR is assumed to live in the memory mapped IO space under
* 4GiB.
diff --git a/src/soc/intel/skylake/bootblock/timestamp.inc b/src/soc/intel/skylake/bootblock/timestamp.inc
index f565775ed8..e5041326ee 100644
--- a/src/soc/intel/skylake/bootblock/timestamp.inc
+++ b/src/soc/intel/skylake/bootblock/timestamp.inc
@@ -1,6 +1,8 @@
-/* Store the initial timestamp for booting in mmx registers. This works
+/*
+ * Store the initial timestamp for booting in mmx registers. This works
* because the bootblock isn't being compiled with MMX support so mm0 and
- * mm1 will be preserved into romstage. */
+ * mm1 will be preserved into romstage.
+ */
.code32
.global stash_timestamp
diff --git a/src/soc/intel/skylake/chip.c b/src/soc/intel/skylake/chip.c
index 00261522ce..f1a104c879 100644
--- a/src/soc/intel/skylake/chip.c
+++ b/src/soc/intel/skylake/chip.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,15 +15,16 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
+#include <chip.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
+#include <fsp_util.h>
#include <soc/pci_devs.h>
#include <soc/ramstage.h>
-#include <soc/intel/broadwell/chip.h>
static void pci_domain_set_resources(device_t dev)
{
@@ -36,14 +38,20 @@ static struct device_operations pci_domain_ops = {
.ops_pci_bus = &pci_bus_default_ops,
};
+static void chip_final(device_t dev)
+{
+ /* Notify FSP done device setup */
+ printk(BIOS_DEBUG,
+ "Calling FspNotify(EnumInitPhaseAfterPciEnumeration)\n");
+ fsp_notify(EnumInitPhaseAfterPciEnumeration);
+}
+
static struct device_operations cpu_bus_ops = {
- .read_resources = DEVICE_NOOP,
- .set_resources = DEVICE_NOOP,
- .enable_resources = DEVICE_NOOP,
- .init = &broadwell_init_cpus,
+ .init = &soc_init_cpus,
+ .final = &chip_final,
};
-static void broadwell_enable(device_t dev)
+static void soc_enable(device_t dev)
{
/* Set the operations if it is a special bus type */
if (dev->path.type == DEVICE_PATH_DOMAIN) {
@@ -52,19 +60,48 @@ static void broadwell_enable(device_t dev)
dev->ops = &cpu_bus_ops;
} else if (dev->path.type == DEVICE_PATH_PCI) {
/* Handle PCH device enable */
- if (PCI_SLOT(dev->path.pci.devfn) > SA_DEV_SLOT_MINIHD &&
+ if (PCI_SLOT(dev->path.pci.devfn) > SA_DEV_SLOT_IGD &&
(dev->ops == NULL || dev->ops->enable == NULL)) {
- broadwell_pch_enable_dev(dev);
+ pch_enable_dev(dev);
}
}
}
-struct chip_operations soc_intel_broadwell_ops = {
- CHIP_NAME("Intel Broadwell")
- .enable_dev = &broadwell_enable,
- .init = &broadwell_init_pre_device,
+struct chip_operations soc_intel_skylake_ops = {
+ CHIP_NAME("Intel Skylake")
+ .enable_dev = &soc_enable,
+ .init = &soc_init_pre_device,
};
+/* UPD parameters to be initialized before SiliconInit */
+void soc_silicon_init_params(SILICON_INIT_UPD *params)
+{
+ const struct device *dev;
+ const struct soc_intel_skylake_config *config;
+
+ /* Set the parameters for SiliconInit */
+ dev = dev_find_slot(0, PCI_DEVFN(PCH_DEV_SLOT_LPC, 0));
+ if (!dev || !dev->chip_info)
+ return;
+ config = dev->chip_info;
+
+ params->Device4Enable = config->Device4Enable;
+}
+
+void soc_display_silicon_init_params(const SILICON_INIT_UPD *original,
+ SILICON_INIT_UPD *params)
+{
+ /* Display the parameters for SiliconInit */
+ printk(BIOS_SPEW, "UPD values for SiliconInit:\n");
+
+ soc_display_upd_value("GpioTablePtr", 4,
+ (uint32_t)original->GpioTablePtr,
+ (uint32_t)params->GpioTablePtr);
+ soc_display_upd_value("Device4Enable", 1,
+ original->Device4Enable,
+ params->Device4Enable);
+}
+
static void pci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
if (!vendor || !device)
@@ -75,6 +112,6 @@ static void pci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
(device << 16) | vendor);
}
-struct pci_operations broadwell_pci_ops = {
+struct pci_operations soc_pci_ops = {
.set_subsystem = &pci_set_subsystem
};
diff --git a/src/soc/intel/skylake/chip.h b/src/soc/intel/skylake/chip.h
index 77c517d5ec..15e211e209 100644
--- a/src/soc/intel/skylake/chip.h
+++ b/src/soc/intel/skylake/chip.h
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2008 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,13 +16,17 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _SOC_INTEL_BROADWELL_CHIP_H_
-#define _SOC_INTEL_BROADWELL_CHIP_H_
+#include <stdint.h>
+#include <soc/pci_devs.h>
+#include <soc/serialio.h>
-struct soc_intel_broadwell_config {
+#ifndef _SOC_CHIP_H_
+#define _SOC_CHIP_H_
+
+struct soc_intel_skylake_config {
/*
* Interrupt Routing configuration
* If bit7 is 1, the interrupt is disabled.
@@ -42,29 +47,9 @@ struct soc_intel_broadwell_config {
uint32_t gpe0_en_4;
/* GPIO SMI configuration */
+ uint32_t ec_smi_gpio;
uint32_t alt_gp_smi_en;
- /* IDE configuration */
- uint8_t sata_port_map;
- uint32_t sata_port0_gen3_tx;
- uint32_t sata_port1_gen3_tx;
- uint32_t sata_port0_gen3_dtle;
- uint32_t sata_port1_gen3_dtle;
-
- /*
- * SATA DEVSLP Mux
- * 0 = port 0 DEVSLP on DEVSLP0/GPIO33
- * 1 = port 3 DEVSLP on DEVSLP0/GPIO33
- */
- uint8_t sata_devslp_mux;
-
- /*
- * DEVSLP Disable
- * 0: DEVSLP is enabled
- * 1: DEVSLP is disabled
- */
- uint8_t sata_devslp_disable;
-
/* Generic IO decode ranges */
uint32_t gen1_dec;
uint32_t gen2_dec;
@@ -77,13 +62,6 @@ struct soc_intel_broadwell_config {
/* Force root port ASPM configuration with port bitmap */
uint8_t pcie_port_force_aspm;
- /* Put SerialIO devices into ACPI mode instead of a PCI device */
- uint8_t sio_acpi_mode;
-
- /* I2C voltage select: 0=3.3V 1=1.8V */
- uint8_t sio_i2c0_voltage;
- uint8_t sio_i2c1_voltage;
-
/* Enable ADSP power gating features */
uint8_t adsp_d3_pg_enable;
uint8_t adsp_sram_pg_enable;
@@ -130,37 +108,125 @@ struct soc_intel_broadwell_config {
/* Enable S0iX support */
int s0ix_enable;
+ /* Deep SX enable for both AC and DC */
+ int deep_s3_enable;
+ int deep_s5_enable;
+
+ /* TCC activation offset */
+ int tcc_offset;
+
/*
- * Minimum voltage for C6/C7 state:
- * 0x67 = 1.6V (full swing)
- * ...
- * 0x79 = 1.7V
- * ...
- * 0x83 = 1.8V (no swing)
+ * The following fields come from fsp_vpd.h.
+ * These are configuration values that are passed to FSP during
+ * MemoryInit.
*/
- int vr_cpu_min_vid;
+ u64 PlatformMemorySize;
+ u8 SmramMask;
+ u8 MrcFastBoot;
+ u32 IedSize;
+ u32 TsegSize;
+ u16 MmioSize;
+
+ /* Probeless Trace function */
+ u8 ProbelessTrace;
+
+ /* Lan */
+ u8 EnableLan;
+
+ /* SATA related */
+ u8 EnableSata;
+ u8 SataMode;
+ u8 SataSalpSupport;
+ u8 SataPortsEnable[8];
+ u8 SataPortsDevSlp[8];
+
+ /* Audio related */
+ u8 EnableAzalia;
+ u8 DspEnable;
+ u8 IoBufferOwnership;
+
+ /* Trace Hub function */
+ u8 EnableTraceHub;
+
+ /* Pcie Root Ports */
+ u8 PcieRpEnable[20];
+ u8 PcieRpClkReqSupport[20];
+ u8 PcieRpClkReqNumber[20];
+
+ /* USB related */
+ u8 PortUsb20Enable[16];
+ u8 PortUsb30Enable[10];
+ u8 XdciEnable;
+ u8 SsicPortEnable;
+
+ /* SMBus */
+ u8 SmbusEnable;
/*
- * Set slow VR ramp rate on C-state exit:
- * 0 = Fast VR ramp rate / 2
- * 1 = Fast VR ramp rate / 4
- * 2 = Fast VR ramp rate / 8
- * 3 = Fast VR ramp rate / 16
+ * SerialIO device mode selection:
+ *
+ * Device index:
+ * PchSerialIoIndexI2C0
+ * PchSerialIoIndexI2C1
+ * PchSerialIoIndexI2C2
+ * PchSerialIoIndexI2C3
+ * PchSerialIoIndexI2C4
+ * PchSerialIoIndexI2C5
+ * PchSerialIoIndexI2C6
+ * PchSerialIoIndexSpi0
+ * PchSerialIoIndexSpi1
+ * PchSerialIoIndexUart0
+ * PchSerialIoIndexUart1
+ * PchSerialIoIndexUart2
+ *
+ * Mode select:
+ * PchSerialIoDisabled
+ * PchSerialIoAcpi
+ * PchSerialIoPci
+ * PchSerialIoAcpiHidden
+ * PchSerialIoLegacyUart
*/
- int vr_slow_ramp_rate_set;
+ u8 SerialIoDevMode[PchSerialIoIndexMax];
- /* Enable slow VR ramp rate */
- int vr_slow_ramp_rate_enable;
+ /* Camera */
+ u8 Cio2Enable;
- /* Deep SX enable */
- int deep_sx_enable_ac;
- int deep_sx_enable_dc;
+ /* eMMC and SD */
+ u8 ScsEmmcEnabled;
+ u8 ScsEmmcHs400Enabled;
+ u8 ScsSdCardEnabled;
- /* TCC activation offset */
- int tcc_offset;
+ /* Integrated Sensor */
+ u8 IshEnable;
+
+ /* SPI related */
+ u8 ShowSpiController;
+
+ u8 PttSwitch;
+ u8 HeciTimeouts;
+ u8 HsioMessaging;
+ u8 Heci3Enabled;
+
+ /* Gfx related */
+ u8 IgdDvmt50PreAlloc;
+ u8 PrimaryDisplay;
+ u8 InternalGfx;
+ u8 ApertureSize;
+ u8 SkipExtGfxScan;
+ u8 ScanExtGfxForLegacyOpRom;
+
+ /*
+ * The following fields come from fsp_vpd.h
+ * These are configuration values that are passed to FSP during
+ * SiliconInit.
+ */
+ u32 LogoPtr;
+ u32 LogoSize;
+ u32 GraphicsConfigPtr;
+ u8 Device4Enable;
};
-typedef struct soc_intel_broadwell_config config_t;
+typedef struct soc_intel_skylake_config config_t;
extern struct chip_operations soc_ops;
diff --git a/src/soc/intel/skylake/cpu.c b/src/soc/intel/skylake/cpu.c
index 984ff7658a..cd88c10e76 100644
--- a/src/soc/intel/skylake/cpu.c
+++ b/src/soc/intel/skylake/cpu.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <console/console.h>
@@ -23,6 +24,7 @@
#include <device/pci.h>
#include <string.h>
#include <arch/acpi.h>
+#include <chip.h>
#include <cpu/cpu.h>
#include <cpu/x86/mtrr.h>
#include <cpu/x86/msr.h>
@@ -40,10 +42,8 @@
#include <soc/msr.h>
#include <soc/pci_devs.h>
#include <soc/ramstage.h>
-#include <soc/rcba.h>
#include <soc/smm.h>
#include <soc/systemagent.h>
-#include <soc/intel/broadwell/chip.h>
/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */
static const u8 power_limit_time_sec_to_msr[] = {
@@ -103,9 +103,11 @@ static const u8 power_limit_time_msr_to_sec[] = {
[0x11] = 128,
};
-/* The core 100MHz BLCK is disabled in deeper c-states. One needs to calibrate
+/*
+ * The core 100MHz BLCK is disabled in deeper c-states. One needs to calibrate
* the 100MHz BCLCK against the 24MHz BLCK to restore the clocks properly
- * when a core is woken up. */
+ * when a core is woken up.
+ */
static int pcode_ready(void)
{
int wait_count;
@@ -159,57 +161,18 @@ static void calibrate_24mhz_bclk(void)
MCHBAR32(BIOS_MAILBOX_DATA));
}
-static u32 pcode_mailbox_read(u32 command)
-{
- if (pcode_ready() < 0) {
- printk(BIOS_ERR, "PCODE: mailbox timeout on wait ready.\n");
- return 0;
- }
-
- /* Send command and start transaction */
- MCHBAR32(BIOS_MAILBOX_INTERFACE) = command | MAILBOX_RUN_BUSY;
-
- if (pcode_ready() < 0) {
- printk(BIOS_ERR, "PCODE: mailbox timeout on completion.\n");
- return 0;
- }
-
- /* Read mailbox */
- return MCHBAR32(BIOS_MAILBOX_DATA);
-}
-
-static int pcode_mailbox_write(u32 command, u32 data)
-{
- if (pcode_ready() < 0) {
- printk(BIOS_ERR, "PCODE: mailbox timeout on wait ready.\n");
- return -1;
- }
-
- MCHBAR32(BIOS_MAILBOX_DATA) = data;
-
- /* Send command and start transaction */
- MCHBAR32(BIOS_MAILBOX_INTERFACE) = command | MAILBOX_RUN_BUSY;
-
- if (pcode_ready() < 0) {
- printk(BIOS_ERR, "PCODE: mailbox timeout on completion.\n");
- return -1;
- }
-
- return 0;
-}
-
static void initialize_vr_config(void)
{
- device_t dev = SA_DEV_ROOT;
- config_t *conf = dev->chip_info;
msr_t msr;
printk(BIOS_DEBUG, "Initializing VR config.\n");
/* Configure VR_CURRENT_CONFIG. */
msr = rdmsr(MSR_VR_CURRENT_CONFIG);
- /* Preserve bits 63 and 62. Bit 62 is PSI4 enable, but it is only valid
- * on ULT systems. */
+ /*
+ * Preserve bits 63 and 62. Bit 62 is PSI4 enable, but it is only valid
+ * on ULT systems.
+ */
msr.hi &= 0xc0000000;
msr.hi |= (0x01 << (52 - 32)); /* PSI3 threshold - 1A. */
msr.hi |= (0x05 << (42 - 32)); /* PSI2 threshold - 5A. */
@@ -225,88 +188,31 @@ static void initialize_vr_config(void)
msr.hi |= (0x200 << (40 - 32)); /* 1.0 */
/* Set IOUT_OFFSET to 0. */
msr.hi &= ~0xff;
+ /* Set exit ramp rate to fast. */
+ msr.hi |= (1 << (50 - 32));
/* Set entry ramp rate to slow. */
msr.hi &= ~(1 << (51 - 32));
/* Enable decay mode on C-state entry. */
msr.hi |= (1 << (52 - 32));
- /* Set the slow ramp rate */
+ /* Set the slow ramp rate to be fast ramp rate / 4 */
msr.hi &= ~(0x3 << (53 - 32));
- /* Configure the C-state exit ramp rate. */
- if (conf->vr_slow_ramp_rate_enable) {
- /* Configured slow ramp rate. */
- msr.hi |= ((conf->vr_slow_ramp_rate_set & 0x3) << (53 - 32));
- /* Set exit ramp rate to slow. */
- msr.hi &= ~(1 << (50 - 32));
- } else {
- /* Fast ramp rate / 4. */
- msr.hi |= (0x01 << (53 - 32));
- /* Set exit ramp rate to fast. */
- msr.hi |= (1 << (50 - 32));
- }
+ msr.hi |= (0x01 << (53 - 32));
/* Set MIN_VID (31:24) to allow CPU to have full control. */
msr.lo &= ~0xff000000;
- msr.lo |= (conf->vr_cpu_min_vid & 0xff) << 24;
wrmsr(MSR_VR_MISC_CONFIG, msr);
/* Configure VR_MISC_CONFIG2 MSR. */
msr = rdmsr(MSR_VR_MISC_CONFIG2);
msr.lo &= ~0xffff;
- /* Allow CPU to control minimum voltage completely (15:8) and
- * set the fast ramp voltage in 10mV steps. */
- if (cpu_family_model() == BROADWELL_FAMILY_ULT)
+ /*
+ * Allow CPU to control minimum voltage completely (15:8) and
+ * set the fast ramp voltage in 10mV steps.
+ */
+ if (cpu_family_model() == SKYLAKE_FAMILY_ULT)
msr.lo |= 0x006a; /* 1.56V */
else
msr.lo |= 0x006f; /* 1.60V */
wrmsr(MSR_VR_MISC_CONFIG2, msr);
-
- /* Set C9/C10 VCC Min */
- pcode_mailbox_write(MAILBOX_BIOS_CMD_WRITE_C9C10_VOLTAGE, 0x1f1f);
-}
-
-static void configure_pch_power_sharing(void)
-{
- u32 pch_power, pch_power_ext, pmsync, pmsync2;
- int i;
-
- /* Read PCH Power levels from PCODE */
- pch_power = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_PCH_POWER);
- pch_power_ext = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_PCH_POWER_EXT);
-
- printk(BIOS_INFO, "PCH Power: PCODE Levels 0x%08x 0x%08x\n",
- pch_power, pch_power_ext);
-
- pmsync = RCBA32(PMSYNC_CONFIG);
- pmsync2 = RCBA32(PMSYNC_CONFIG2);
-
- /* Program PMSYNC_TPR_CONFIG PCH power limit values
- * pmsync[0:4] = mailbox[0:5]
- * pmsync[8:12] = mailbox[6:11]
- * pmsync[16:20] = mailbox[12:17]
- */
- for (i = 0; i < 3; i++) {
- u32 level = pch_power & 0x3f;
- pch_power >>= 6;
- pmsync &= ~(0x1f << (i * 8));
- pmsync |= (level & 0x1f) << (i * 8);
- }
- RCBA32(PMSYNC_CONFIG) = pmsync;
-
- /* Program PMSYNC_TPR_CONFIG2 Extended PCH power limit values
- * pmsync2[0:4] = mailbox[23:18]
- * pmsync2[8:12] = mailbox_ext[6:11]
- * pmsync2[16:20] = mailbox_ext[12:17]
- * pmsync2[24:28] = mailbox_ext[18:22]
- */
- pmsync2 &= ~0x1f;
- pmsync2 |= pch_power & 0x1f;
-
- for (i = 1; i < 4; i++) {
- u32 level = pch_power_ext & 0x3f;
- pch_power_ext >>= 6;
- pmsync2 &= ~(0x1f << (i * 8));
- pmsync2 |= (level & 0x1f) << (i * 8);
- }
- RCBA32(PMSYNC_CONFIG2) = pmsync2;
}
int cpu_config_tdp_levels(void)
@@ -371,8 +277,8 @@ void set_power_limits(u8 power_limit_1_time)
limit.hi = 0;
limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK;
limit.hi |= PKG_POWER_LIMIT_EN;
- /* Power limit 2 time is only programmable on server SKU */
+ /* Power limit 2 time is only programmable on server SKU */
wrmsr(MSR_PKG_POWER_LIMIT, limit);
/* Set power limit values in MCHBAR as well */
@@ -393,73 +299,13 @@ void set_power_limits(u8 power_limit_1_time)
}
}
-static void configure_c_states(void)
-{
- msr_t msr;
-
- msr = rdmsr(MSR_PMG_CST_CONFIG_CONTROL);
- msr.lo |= (1 << 31); // Timed MWAIT Enable
- msr.lo |= (1 << 30); // Package c-state Undemotion Enable
- msr.lo |= (1 << 29); // Package c-state Demotion Enable
- msr.lo |= (1 << 28); // C1 Auto Undemotion Enable
- msr.lo |= (1 << 27); // C3 Auto Undemotion Enable
- msr.lo |= (1 << 26); // C1 Auto Demotion Enable
- msr.lo |= (1 << 25); // C3 Auto Demotion Enable
- msr.lo &= ~(1 << 10); // Disable IO MWAIT redirection
- /* The deepest package c-state defaults to factory-configured value. */
- wrmsr(MSR_PMG_CST_CONFIG_CONTROL, msr);
-
- msr = rdmsr(MSR_MISC_PWR_MGMT);
- msr.lo &= ~(1 << 0); // Enable P-state HW_ALL coordination
- wrmsr(MSR_MISC_PWR_MGMT, msr);
-
- msr = rdmsr(MSR_POWER_CTL);
- msr.lo |= (1 << 18); // Enable Energy Perf Bias MSR 0x1b0
- msr.lo |= (1 << 1); // C1E Enable
- msr.lo |= (1 << 0); // Bi-directional PROCHOT#
- wrmsr(MSR_POWER_CTL, msr);
-
- /* C-state Interrupt Response Latency Control 0 - package C3 latency */
- msr.hi = 0;
- msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_0_LIMIT;
- wrmsr(MSR_C_STATE_LATENCY_CONTROL_0, msr);
-
- /* C-state Interrupt Response Latency Control 1 */
- msr.hi = 0;
- msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_1_LIMIT;
- wrmsr(MSR_C_STATE_LATENCY_CONTROL_1, msr);
-
- /* C-state Interrupt Response Latency Control 2 - package C6/C7 short */
- msr.hi = 0;
- msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_2_LIMIT;
- wrmsr(MSR_C_STATE_LATENCY_CONTROL_2, msr);
-
- /* C-state Interrupt Response Latency Control 3 - package C8 */
- msr.hi = 0;
- msr.lo = IRTL_VALID | IRTL_1024_NS |
- C_STATE_LATENCY_CONTROL_3_LIMIT;
- wrmsr(MSR_C_STATE_LATENCY_CONTROL_3, msr);
-
- /* C-state Interrupt Response Latency Control 4 - package C9 */
- msr.hi = 0;
- msr.lo = IRTL_VALID | IRTL_1024_NS |
- C_STATE_LATENCY_CONTROL_4_LIMIT;
- wrmsr(MSR_C_STATE_LATENCY_CONTROL_4, msr);
-
- /* C-state Interrupt Response Latency Control 5 - package C10 */
- msr.hi = 0;
- msr.lo = IRTL_VALID | IRTL_1024_NS |
- C_STATE_LATENCY_CONTROL_5_LIMIT;
- wrmsr(MSR_C_STATE_LATENCY_CONTROL_5, msr);
-}
-
static void configure_thermal_target(void)
{
device_t dev = SA_DEV_ROOT;
config_t *conf = dev->chip_info;
msr_t msr;
- /* Set TCC activation offset if supported */
+ /* Set TCC activaiton offset if supported */
msr = rdmsr(MSR_PLATFORM_INFO);
if ((msr.lo & (1 << 30)) && conf->tcc_offset) {
msr = rdmsr(MSR_TEMPERATURE_TARGET);
@@ -474,9 +320,9 @@ static void configure_misc(void)
msr_t msr;
msr = rdmsr(IA32_MISC_ENABLE);
- msr.lo |= (1 << 0); /* Fast String enable */
- msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */
- msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */
+ msr.lo |= (1 << 0); /* Fast String enable */
+ msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */
+ msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */
wrmsr(IA32_MISC_ENABLE, msr);
/* Disable Thermal interrupts */
@@ -567,37 +413,24 @@ static void configure_mca(void)
msr = rdmsr(mcg_cap_msr);
num_banks = msr.lo & 0xff;
msr.lo = msr.hi = 0;
- /* TODO(adurbin): This should only be done on a cold boot. Also, some
+ /*
+ * TODO(adurbin): This should only be done on a cold boot. Also, some
* of these banks are core vs package scope. For now every CPU clears
- * every bank. */
+ * every bank.
+ */
for (i = 0; i < num_banks; i++)
wrmsr(IA32_MC0_STATUS + (i * 4), msr);
}
-#if CONFIG_USBDEBUG
-static unsigned ehci_debug_addr;
-#endif
-
static void bsp_init_before_ap_bringup(struct bus *cpu_bus)
{
-#if CONFIG_USBDEBUG
- if(!ehci_debug_addr)
- ehci_debug_addr = get_ehci_debug();
- set_ehci_debug(0);
-#endif
-
/* Setup MTRRs based on physical address size. */
x86_setup_fixed_mtrrs();
x86_setup_var_mtrrs(cpuid_eax(0x80000008) & 0xff, 2);
x86_mtrr_check();
-#if CONFIG_USBDEBUG
- set_ehci_debug(ehci_debug_addr);
-#endif
-
initialize_vr_config();
calibrate_24mhz_bclk();
- configure_pch_power_sharing();
}
/* All CPUs including BSP will run the following function. */
@@ -610,9 +443,6 @@ static void cpu_core_init(device_t cpu)
enable_lapic_tpr();
setup_lapic();
- /* Configure C States */
- configure_c_states();
-
/* Configure Enhanced SpeedStep and Thermal Sensors */
configure_misc();
@@ -649,31 +479,36 @@ static void relocate_and_load_microcode(void *unused)
static void enable_smis(void *unused)
{
- /* Now that all APs have been relocated as well as the BSP let SMIs
- * start flowing. */
+ /*
+ * Now that all APs have been relocated as well as the BSP let SMIs
+ * start flowing.
+ */
southbridge_smm_enable_smi();
/* Lock down the SMRAM space. */
+#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
smm_lock();
+#endif
}
static struct mp_flight_record mp_steps[] = {
MP_FR_NOBLOCK_APS(relocate_and_load_microcode, NULL,
- relocate_and_load_microcode, NULL),
+ relocate_and_load_microcode, NULL),
+#if IS_ENABLED(CONFIG_SMP)
MP_FR_BLOCK_APS(mp_initialize_cpu, NULL, mp_initialize_cpu, NULL),
/* Wait for APs to finish initialization before proceeding. */
+#endif
MP_FR_BLOCK_APS(NULL, NULL, enable_smis, NULL),
};
static struct device_operations cpu_dev_ops = {
.init = cpu_core_init,
+ .acpi_fill_ssdt_generator = generate_cpu_entries,
};
static struct cpu_device_id cpu_table[] = {
- { X86_VENDOR_INTEL, CPUID_HASWELL_ULT },
- { X86_VENDOR_INTEL, CPUID_BROADWELL_C0 },
- { X86_VENDOR_INTEL, CPUID_BROADWELL_D0 },
- { X86_VENDOR_INTEL, CPUID_BROADWELL_E0 },
+ { X86_VENDOR_INTEL, CPUID_SKYLAKE_C0 },
+ { X86_VENDOR_INTEL, CPUID_SKYLAKE_D0 },
{ 0, 0 },
};
@@ -682,7 +517,7 @@ static const struct cpu_driver driver __cpu_driver = {
.id_table = cpu_table,
};
-void broadwell_init_cpus(device_t dev)
+void soc_init_cpus(device_t dev)
{
struct bus *cpu_bus = dev->link_list;
int num_threads;
@@ -699,15 +534,20 @@ void broadwell_init_cpus(device_t dev)
ht_disabled = num_threads == num_cores;
- /* Perform any necessary BSP initialization before APs are brought up.
+ /*
+ * Perform any necessary BSP initialization before APs are brought up.
* This call also allows the BSP to prepare for any secondary effects
- * from calling cpu_initialize() such as smm_init(). */
+ * from calling cpu_initialize() such as smm_init().
+ */
bsp_init_before_ap_bringup(cpu_bus);
microcode_patch = intel_microcode_find();
/* Save default SMM area before relocation occurs. */
- smm_save_area = backup_default_smm_area();
+ if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER))
+ smm_save_area = backup_default_smm_area();
+ else
+ smm_save_area = NULL;
mp_params.num_cpus = num_threads;
mp_params.parallel_microcode_load = 1;
@@ -719,17 +559,18 @@ void broadwell_init_cpus(device_t dev)
mp_params.num_records = ARRAY_SIZE(mp_steps);
mp_params.microcode_pointer = microcode_patch;
- /* Load relocation and permanent handlers. Then initiate relocation. */
+ /* Load relocation and permeanent handlers. Then initiate relocation. */
if (smm_initialize())
- printk(BIOS_CRIT, "SMM initialization failed...\n");
+ printk(BIOS_CRIT, "SMM Initialiazation failed...\n");
- if (mp_init(cpu_bus, &mp_params)) {
- printk(BIOS_ERR, "MP initialization failure.\n");
- }
+ if (IS_ENABLED(CONFIG_SMP))
+ if (mp_init(cpu_bus, &mp_params))
+ printk(BIOS_ERR, "MP initialization failure.\n");
/* Set Max Ratio */
set_max_ratio();
/* Restore the default SMM region. */
- restore_default_smm_area(smm_save_area);
+ if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER))
+ restore_default_smm_area(smm_save_area);
}
diff --git a/src/soc/intel/skylake/cpu_info.c b/src/soc/intel/skylake/cpu_info.c
index 72667ac18f..f3fd0bd0e9 100644
--- a/src/soc/intel/skylake/cpu_info.c
+++ b/src/soc/intel/skylake/cpu_info.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <console/console.h>
@@ -23,6 +24,7 @@
#include <cpu/x86/msr.h>
#include <soc/cpu.h>
#include <soc/msr.h>
+#include <soc/ramstage.h>
#include <soc/systemagent.h>
u32 cpu_family_model(void)
@@ -42,7 +44,7 @@ int cpu_is_ult(void)
if (ult < 0) {
u32 fm = cpu_family_model();
- if (fm == BROADWELL_FAMILY_ULT || fm == HASWELL_FAMILY_ULT)
+ if (fm == SKYLAKE_FAMILY_ULT)
ult = 1;
else
ult = 0;
diff --git a/src/soc/intel/skylake/ehci.c b/src/soc/intel/skylake/ehci.c
deleted file mode 100644
index 3073a54a2e..0000000000
--- a/src/soc/intel/skylake/ehci.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <delay.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <soc/ehci.h>
-#include <soc/pch.h>
-
-static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- u8 access_cntl;
-
- access_cntl = pci_read_config8(dev, 0x80);
-
- /* Enable writes to protected registers. */
- pci_write_config8(dev, 0x80, access_cntl | 1);
-
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-
- /* Restore protection. */
- pci_write_config8(dev, 0x80, access_cntl);
-}
-
-static void usb_ehci_set_resources(struct device *dev)
-{
-#if CONFIG_USBDEBUG
- struct resource *res;
- u32 base;
- u32 usb_debug;
-
- usb_debug = get_ehci_debug();
- set_ehci_debug(0);
-#endif
- pci_dev_set_resources(dev);
-
-#if CONFIG_USBDEBUG
- res = find_resource(dev, 0x10);
- set_ehci_debug(usb_debug);
- if (!res) return;
- base = res->base;
- set_ehci_base(base);
- report_resource_stored(dev, res, "");
-#endif
-}
-
-static void ehci_enable(struct device *dev)
-{
- if (CONFIG_USBDEBUG)
- dev->enabled = 1;
- else
- pch_disable_devfn(dev);
-}
-
-static struct pci_operations ehci_ops_pci = {
- .set_subsystem = &usb_ehci_set_subsystem,
-};
-
-static struct device_operations usb_ehci_ops = {
- .read_resources = &pci_dev_read_resources,
- .set_resources = &usb_ehci_set_resources,
- .enable_resources = &pci_dev_enable_resources,
- .ops_pci = &ehci_ops_pci,
- .enable = &ehci_enable,
-};
-
-static const unsigned short pci_device_ids[] = {
- 0x9c26, /* LynxPoint-LP */
- 0x9ca6, /* WildcatPoint */
- 0
-};
-
-static const struct pci_driver pch_usb_ehci __pci_driver = {
- .ops = &usb_ehci_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .devices = pci_device_ids,
-};
diff --git a/src/soc/intel/skylake/elog.c b/src/soc/intel/skylake/elog.c
index 8cbc3e70b6..3ae0890c33 100644
--- a/src/soc/intel/skylake/elog.c
+++ b/src/soc/intel/skylake/elog.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <bootstate.h>
@@ -22,8 +23,8 @@
#include <console/console.h>
#include <stdint.h>
#include <elog.h>
-#include <soc/lpc.h>
#include <soc/pm.h>
+#include <soc/pmc.h>
static void pch_log_gpio_gpe(u32 gpe0_sts, u32 gpe0_en, int start)
{
@@ -75,26 +76,17 @@ static void pch_log_wake_source(struct chipset_power_state *ps)
static void pch_log_power_and_resets(struct chipset_power_state *ps)
{
- /* Thermal Trip Status */
- if (ps->gen_pmcon2 & THERMTRIP_STS)
- elog_add_event(ELOG_TYPE_THERM_TRIP);
+ /* TODO: Thermal Trip Status. There is a thermal device and
+ * other status registers. */
/* PWR_FLR Power Failure */
- if (ps->gen_pmcon2 & PWROK_FLR)
+ if (ps->gen_pmcon_b & PWR_FLR)
elog_add_event(ELOG_TYPE_POWER_FAIL);
/* SUS Well Power Failure */
- if (ps->gen_pmcon3 & SUS_PWR_FLR)
+ if (ps->gen_pmcon_b & SUS_PWR_FLR)
elog_add_event(ELOG_TYPE_SUS_POWER_FAIL);
- /* SYS_PWROK Failure */
- if (ps->gen_pmcon2 & SYSPWR_FLR)
- elog_add_event(ELOG_TYPE_SYS_PWROK_FAIL);
-
- /* PWROK Failure */
- if (ps->gen_pmcon2 & PWROK_FLR)
- elog_add_event(ELOG_TYPE_PWROK_FAIL);
-
/* TCO Timeout */
if (ps->prev_sleep_state != 3 &&
ps->tco2_sts & TCO2_STS_SECOND_TO)
@@ -105,15 +97,11 @@ static void pch_log_power_and_resets(struct chipset_power_state *ps)
elog_add_event(ELOG_TYPE_POWER_BUTTON_OVERRIDE);
/* RTC reset */
- if (ps->gen_pmcon3 & RTC_BATTERY_DEAD)
+ if (ps->gen_pmcon_b & RTC_BATTERY_DEAD)
elog_add_event(ELOG_TYPE_RTC_RESET);
- /* System Reset Status (reset button pushed) */
- if (ps->gen_pmcon2 & SYSTEM_RESET_STS)
- elog_add_event(ELOG_TYPE_RESET_BUTTON);
-
- /* General Reset Status */
- if (ps->gen_pmcon3 & GEN_RST_STS)
+ /* Host Reset Status */
+ if (ps->gen_pmcon_b & HOST_RST_STS)
elog_add_event(ELOG_TYPE_SYSTEM_RESET);
/* ACPI Wake Event */
@@ -126,8 +114,8 @@ static void pch_log_state(void *unused)
struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE);
if (ps == NULL) {
- printk(BIOS_ERR, "Not logging power state information. "
- "Power state not found in cbmem.\n");
+ printk(BIOS_ERR,
+ "Not logging power state information. Power state not found in cbmem.\n");
return;
}
diff --git a/src/soc/intel/skylake/finalize.c b/src/soc/intel/skylake/finalize.c
index bf5cdcd9bf..bec8676c1d 100644
--- a/src/soc/intel/skylake/finalize.c
+++ b/src/soc/intel/skylake/finalize.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/io.h>
@@ -26,101 +27,66 @@
#include <spi-generic.h>
#include <stdlib.h>
#include <soc/pci_devs.h>
-#include <soc/lpc.h>
-#include <soc/me.h>
-#include <soc/rcba.h>
+#include <soc/pcr.h>
+#include <soc/pm.h>
+#include <soc/pmc.h>
#include <soc/spi.h>
#include <soc/systemagent.h>
+#include <device/pci.h>
-const struct reg_script system_agent_finalize_script[] = {
- REG_PCI_OR16(0x50, 1 << 0), /* GGC */
- REG_PCI_OR32(0x5c, 1 << 0), /* DPR */
- REG_PCI_OR32(0x78, 1 << 10), /* ME */
- REG_PCI_OR32(0x90, 1 << 0), /* REMAPBASE */
- REG_PCI_OR32(0x98, 1 << 0), /* REMAPLIMIT */
- REG_PCI_OR32(0xa0, 1 << 0), /* TOM */
- REG_PCI_OR32(0xa8, 1 << 0), /* TOUUD */
- REG_PCI_OR32(0xb0, 1 << 0), /* BDSM */
- REG_PCI_OR32(0xb4, 1 << 0), /* BGSM */
- REG_PCI_OR32(0xb8, 1 << 0), /* TSEGMB */
- REG_PCI_OR32(0xbc, 1 << 0), /* TOLUD */
- REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x5500, 1 << 0), /* PAVP */
- REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x5f00, 1 << 31), /* SA PM */
- REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x6020, 1 << 0), /* UMA GFX */
- REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x63fc, 1 << 0), /* VTDTRK */
- REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x6800, 1 << 31),
- REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x7000, 1 << 31),
- REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x77fc, 1 << 0),
- REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x50fc, 0x8f),
- REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x7ffc, 1 << 0),
- REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x5880, 1 << 5),
- REG_MMIO_WRITE8(MCH_BASE_ADDRESS + 0x50fc, 0x8f), /* MC */
-
- REG_SCRIPT_END
-};
+static void pch_finalize_script(void)
+{
+ device_t dev;
+ uint32_t reg32, hsfs;
+ void *spibar = get_spi_bar();
+ u8 reg8;
+ u16 tcobase;
+ u16 tcocnt;
+ uint8_t *pmcbase;
+ u32 pmsyncreg;
-const struct reg_script pch_finalize_script[] = {
/* Set SPI opcode menu */
- REG_MMIO_WRITE16(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + SPIBAR_PREOP,
- SPI_OPPREFIX),
- REG_MMIO_WRITE16(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + SPIBAR_OPTYPE,
- SPI_OPTYPE),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + SPIBAR_OFFSET +
- SPIBAR_OPMENU_LOWER, SPI_OPMENU_LOWER),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + SPIBAR_OFFSET +
- SPIBAR_OPMENU_UPPER, SPI_OPMENU_UPPER),
-
+ write16(spibar + SPIBAR_PREOP, SPI_OPPREFIX);
+ write16(spibar + SPIBAR_OPTYPE, SPI_OPTYPE);
+ write32(spibar + SPIBAR_OPMENU_LOWER, SPI_OPMENU_LOWER);
+ write32(spibar + SPIBAR_OPMENU_UPPER, SPI_OPMENU_UPPER);
/* Lock SPIBAR */
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + SPIBAR_HSFS,
- SPIBAR_HSFS_FLOCKDN),
-
- /* TC Lockdown */
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x0050, (1 << 31)),
+ hsfs = read32(spibar + SPIBAR_HSFS);
+ hsfs |= SPIBAR_HSFS_FLOCKDN;
+ write32(spibar + SPIBAR_HSFS, hsfs);
- /* BIOS Interface Lockdown */
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + GCS, (1 << 0)),
-
- /* Function Disable SUS Well Lockdown */
- REG_MMIO_OR8(RCBA_BASE_ADDRESS + FDSW, (1 << 7)),
+ /*TCO Lock down*/
+ tcobase = pmc_tco_regs();
+ tcocnt = inw(tcobase + TCO1_CNT);
+ tcocnt |= TCO_LOCK;
+ outw(tcocnt, tcobase + TCO1_CNT);
/* Global SMI Lock */
- REG_PCI_OR16(GEN_PMCON_1, SMI_LOCK),
+ dev = PCH_DEV_PMC;
+ reg8 = pci_read_config8(dev, GEN_PMCON_A);
+ reg8 |= SMI_LOCK;
+ pci_write_config8(dev, GEN_PMCON_A, reg8);
- /* GEN_PMCON Lock */
- REG_PCI_OR8(GEN_PMCON_LOCK, SLP_STR_POL_LOCK | ACPI_BASE_LOCK),
+ /* Lock down ABASE and sleep stretching policy */
+ reg32 = pci_read_config32(dev, GEN_PMCON_B);
+ reg32 |= (SLP_STR_POL_LOCK | ACPI_BASE_LOCK);
+ pci_write_config32(dev, GEN_PMCON_B, reg32);
/* PMSYNC */
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + PMSYNC_CONFIG, (1 << 31)),
-
-
- REG_SCRIPT_END
-};
+ pmcbase = pmc_mmio_regs();
+ pmsyncreg = read32(pmcbase + PMSYNC_TPR_CFG);
+ pmsyncreg |= PMSYNC_LOCK;
+ write32(pmcbase + PMSYNC_TPR_CFG, pmsyncreg);
+}
-static void broadwell_finalize(void *unused)
+static void soc_finalize(void *unused)
{
printk(BIOS_DEBUG, "Finalizing chipset.\n");
-
- reg_script_run_on_dev(SA_DEV_ROOT, system_agent_finalize_script);
- reg_script_run_on_dev(PCH_DEV_LPC, pch_finalize_script);
-
- /* Lock */
- RCBA32_OR(0x3a6c, 0x00000001);
-
- /* Read+Write the following registers */
- MCHBAR32(0x6030) = MCHBAR32(0x6030);
- MCHBAR32(0x6034) = MCHBAR32(0x6034);
- MCHBAR32(0x6008) = MCHBAR32(0x6008);
- RCBA32(0x21a4) = RCBA32(0x21a4);
-
- /* Re-init SPI after lockdown */
- spi_init();
-
- printk(BIOS_DEBUG, "Finalizing SMM.\n");
- outb(APM_CNT_FINALIZE, APM_CNT);
+ pch_finalize_script();
/* Indicate finalize step with post code */
post_code(POST_OS_BOOT);
}
-BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, broadwell_finalize, NULL);
-BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, broadwell_finalize, NULL);
+BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, soc_finalize, NULL);
+BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, soc_finalize, NULL);
diff --git a/src/soc/intel/skylake/flash_controller.c b/src/soc/intel/skylake/flash_controller.c
new file mode 100644
index 0000000000..d8528b19d9
--- /dev/null
+++ b/src/soc/intel/skylake/flash_controller.c
@@ -0,0 +1,615 @@
+/*
+ * Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/* This file is derived from the flashrom project. */
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <bootstate.h>
+#include <delay.h>
+#include <arch/io.h>
+#include <console/console.h>
+#include <device/pci_ids.h>
+#include <spi_flash.h>
+#include <spi-generic.h>
+#include <soc/pci_devs.h>
+#include <soc/spi.h>
+
+#define HSFC_FCYCLE_OFF 1 /* 1-2: FLASH Cycle */
+#define HSFC_FCYCLE (0x3 << HSFC_FCYCLE_OFF)
+#define HSFC_FCYCLE_WR (0x2 << HSFC_FCYCLE_OFF)
+#define HSFC_FDBC_OFF 8 /* 8-13: Flash Data Byte Count */
+#define HSFC_FDBC (0x3f << HSFC_FDBC_OFF)
+
+#if ENV_SMM
+#define pci_read_config_byte(dev, reg, targ)\
+ (*(targ) = pci_read_config8(dev, reg))
+#define pci_read_config_word(dev, reg, targ)\
+ (*(targ) = pci_read_config16(dev, reg))
+#define pci_read_config_dword(dev, reg, targ)\
+ (*(targ) = pci_read_config32(dev, reg))
+#define pci_write_config_byte(dev, reg, val)\
+ pci_write_config8(dev, reg, val)
+#define pci_write_config_word(dev, reg, val)\
+ pci_write_config16(dev, reg, val)
+#define pci_write_config_dword(dev, reg, val)\
+ pci_write_config32(dev, reg, val)
+#else /* !ENV_SMM */
+#include <device/device.h>
+#include <device/pci.h>
+#define pci_read_config_byte(dev, reg, targ)\
+ (*(targ) = pci_read_config8(dev, reg))
+#define pci_read_config_word(dev, reg, targ)\
+ (*(targ) = pci_read_config16(dev, reg))
+#define pci_read_config_dword(dev, reg, targ)\
+ (*(targ) = pci_read_config32(dev, reg))
+#define pci_write_config_byte(dev, reg, val)\
+ pci_write_config8(dev, reg, val)
+#define pci_write_config_word(dev, reg, val)\
+ pci_write_config16(dev, reg, val)
+#define pci_write_config_dword(dev, reg, val)\
+ pci_write_config32(dev, reg, val)
+#endif /* ENV_SMM */
+
+#define B_PCH_SPI_BAR0_MASK 0x0FFF
+
+typedef struct spi_slave pch_spi_slave;
+static struct spi_flash *spi_flash_hwseq_probe(struct spi_slave *spi);
+static int pch_hwseq_write(struct spi_flash *flash,
+ u32 addr, size_t len, const void *buf);
+static int pch_hwseq_read(struct spi_flash *flash,
+ u32 addr, size_t len, void *buf);
+
+typedef struct pch_spi_regs {
+ uint32_t bfpr;
+ uint16_t hsfs;
+ uint16_t hsfc;
+ uint32_t faddr;
+ uint32_t _reserved0;
+ uint32_t fdata[16];
+ uint32_t frap;
+ uint32_t freg[6];
+ uint32_t _reserved1[6];
+ uint32_t pr[5];
+ uint32_t _reserved2[2];
+ uint8_t ssfs;
+ uint8_t ssfc[3];
+ uint16_t preop;
+ uint16_t optype;
+ uint8_t opmenu[8];
+ uint32_t bbar;
+ uint32_t fdoc;
+ uint32_t fdod;
+ uint8_t _reserved4[8];
+ uint32_t afc;
+ uint32_t lvscc;
+ uint32_t uvscc;
+ uint8_t _reserved5[4];
+ uint32_t fpb;
+ uint8_t _reserved6[28];
+ uint32_t srdl;
+ uint32_t srdc;
+ uint32_t srd;
+} __attribute__((packed)) pch_spi_regs;
+
+typedef struct pch_spi_controller {
+ int locked;
+ uint32_t flmap0;
+ uint32_t hsfs;
+ pch_spi_regs *pch_spi;
+ uint8_t *opmenu;
+ int menubytes;
+ uint16_t *preop;
+ uint16_t *optype;
+ uint32_t *addr;
+ uint8_t *data;
+ unsigned databytes;
+ uint8_t *status;
+ uint16_t *control;
+ uint32_t *bbar;
+} pch_spi_controller;
+
+static pch_spi_controller cntlr;
+
+enum {
+ HSFS_FDONE = 0x0001,
+ HSFS_FCERR = 0x0002,
+ HSFS_AEL = 0x0004,
+ HSFS_BERASE_MASK = 0x0018,
+ HSFS_BERASE_SHIFT = 3,
+ HSFS_SCIP = 0x0020,
+ HSFS_FDOPSS = 0x2000,
+ HSFS_FDV = 0x4000,
+ HSFS_FLOCKDN = 0x8000
+};
+
+enum {
+ HSFC_FGO = 0x0001,
+ HSFC_FCYCLE_MASK = 0x0006,
+ HSFC_FCYCLE_SHIFT = 1,
+ HSFC_FDBC_MASK = 0x3f00,
+ HSFC_FDBC_SHIFT = 8,
+ HSFC_FSMIE = 0x8000
+};
+
+#if IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)
+
+static u8 readb_(const void *addr)
+{
+ u8 v = read8(addr);
+ printk(BIOS_DEBUG, "read %2.2x from %4.4x\n",
+ v, ((unsigned) addr & 0xffff) - 0xf020);
+ return v;
+}
+
+static u16 readw_(const void *addr)
+{
+ u16 v = read16(addr);
+ printk(BIOS_DEBUG, "read %4.4x from %4.4x\n",
+ v, ((unsigned) addr & 0xffff) - 0xf020);
+ return v;
+}
+
+static u32 readl_(const void *addr)
+{
+ u32 v = read32(addr);
+ printk(BIOS_DEBUG, "read %8.8x from %4.4x\n",
+ v, ((unsigned) addr & 0xffff) - 0xf020);
+ return v;
+}
+
+static void writeb_(u8 b, void *addr)
+{
+ write8(addr, b);
+ printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n",
+ b, ((unsigned) addr & 0xffff) - 0xf020);
+}
+
+static void writew_(u16 b, void *addr)
+{
+ write16(addr, b);
+ printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n",
+ b, ((unsigned) addr & 0xffff) - 0xf020);
+}
+
+static void writel_(u32 b, void *addr)
+{
+ write32(addr, b);
+ printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n",
+ b, ((unsigned) addr & 0xffff) - 0xf020);
+}
+
+#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */
+
+#define readb_(a) read8(a)
+#define readw_(a) read16(a)
+#define readl_(a) read32(a)
+#define writeb_(val, addr) write8(addr, val)
+#define writew_(val, addr) write16(addr, val)
+#define writel_(val, addr) write32(addr, val)
+
+#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */
+
+static void pch_set_bbar(uint32_t minaddr)
+{
+ uint32_t pchspi_bbar;
+
+ minaddr &= SPIBAR_MEMBAR_MASK;
+ pchspi_bbar = readl_(cntlr.bbar) & ~SPIBAR_MEMBAR_MASK;
+ pchspi_bbar |= minaddr;
+ writel_(pchspi_bbar, cntlr.bbar);
+}
+
+unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len)
+{
+ return min(cntlr.databytes, buf_len);
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs)
+{
+ pch_spi_slave *slave = malloc(sizeof(*slave));
+
+ if (!slave) {
+ printk(BIOS_DEBUG, "ICH SPI: Bad allocation\n");
+ return NULL;
+ }
+
+ memset(slave, 0, sizeof(*slave));
+
+ slave->bus = bus;
+ slave->cs = cs;
+ slave->force_programmer_specific = 1;
+ slave->programmer_specific_probe = spi_flash_hwseq_probe;
+
+ return slave;
+}
+
+static u32 spi_get_flash_size(void)
+{
+ uint32_t flcomp;
+ u32 size;
+
+ writel_(SPIBAR_FDOC_COMPONENT, &cntlr.pch_spi->fdoc);
+ flcomp = readl_(&cntlr.pch_spi->fdod);
+ printk(BIOS_DEBUG, "flcomp = %x\n", flcomp);
+
+ switch (flcomp & FLCOMP_C0DEN_MASK) {
+ case FLCOMP_C0DEN_8MB:
+ size = 0x100000;
+ break;
+ case FLCOMP_C0DEN_16MB:
+ size = 0x1000000;
+ break;
+ case FLCOMP_C0DEN_32MB:
+ size = 0x10000000;
+ break;
+ default:
+ size = 0x1000000;
+ }
+
+ printk(BIOS_DEBUG, "flash size 0x%x bytes\n", size);
+
+ return size;
+}
+
+int spi_xfer(struct spi_slave *slave, const void *dout,
+ unsigned int bytesout, void *din, unsigned int bytesin)
+{
+ /* TODO: Define xfer for hardware sequencing. */
+ return -1;
+}
+
+void spi_init(void)
+{
+ uint8_t bios_cntl;
+ device_t dev = PCH_DEV_SPI;
+ pch_spi_regs *pch_spi;
+ uint16_t hsfs;
+
+ /* Root Complex Register Block */
+ pch_spi = (pch_spi_regs *)(get_spi_bar());
+ cntlr.pch_spi = pch_spi;
+ hsfs = readw_(&pch_spi->hsfs);
+ cntlr.hsfs = hsfs;
+ cntlr.opmenu = pch_spi->opmenu;
+ cntlr.menubytes = sizeof(pch_spi->opmenu);
+ cntlr.optype = &pch_spi->optype;
+ cntlr.addr = &pch_spi->faddr;
+ cntlr.data = (uint8_t *)pch_spi->fdata;
+ cntlr.databytes = sizeof(pch_spi->fdata);
+ cntlr.status = &pch_spi->ssfs;
+ cntlr.control = (uint16_t *)pch_spi->ssfc;
+ cntlr.bbar = &pch_spi->bbar;
+ cntlr.preop = &pch_spi->preop;
+
+ if (cntlr.hsfs & HSFS_FDV) {
+ /* Select Flash Descriptor Section Index to 1 */
+ writel_(SPIBAR_FDOC_FDSI_1, &pch_spi->fdoc);
+ cntlr.flmap0 = readl_(&pch_spi->fdod);
+ }
+
+ pch_set_bbar(0);
+
+ /* Disable the BIOS write protect so write commands are allowed. */
+ pci_read_config_byte(dev, SPIBAR_BIOS_CNTL, &bios_cntl);
+ bios_cntl &= ~SPIBAR_BC_EISS;
+ bios_cntl |= SPIBAR_BC_WPD;
+ pci_write_config_byte(dev, SPIBAR_BIOS_CNTL, bios_cntl);
+}
+
+#if ENV_RAMSTAGE
+
+static void spi_init_cb(void *unused)
+{
+ spi_init();
+}
+
+BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_ENTRY, spi_init_cb, NULL);
+
+#endif /* ENV_RAMSTAGE */
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ /* Handled by PCH automatically. */
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ /* Handled by PCH automatically. */
+}
+
+static void pch_hwseq_set_addr(uint32_t addr)
+{
+ uint32_t addr_old = readl_(&cntlr.pch_spi->faddr) & ~SPIBAR_FADDR_MASK;
+ writel_((addr & SPIBAR_FADDR_MASK) | addr_old, &cntlr.pch_spi->faddr);
+}
+
+/*
+ * Polls for Cycle Done Status, Flash Cycle Error or timeout in 8 us intervals.
+ * Resets all error flags in HSFS.
+ * Returns 0 if the cycle completes successfully without errors within
+ * timeout us, 1 on errors.
+ */
+static int pch_hwseq_wait_for_cycle_complete(unsigned int timeout,
+ unsigned int len)
+{
+ uint16_t hsfs;
+ uint32_t addr;
+
+ timeout /= 8; /* scale timeout duration to counter */
+ while ((((hsfs = readw_(&cntlr.pch_spi->hsfs)) &
+ (HSFS_FDONE | HSFS_FCERR)) == 0) && --timeout) {
+ udelay(8);
+ }
+ writew_(readw_(&cntlr.pch_spi->hsfs), &cntlr.pch_spi->hsfs);
+
+ if (!timeout) {
+ uint16_t hsfc;
+ addr = readl_(&cntlr.pch_spi->faddr) & SPIBAR_FADDR_MASK;
+ hsfc = readw_(&cntlr.pch_spi->hsfc);
+ printk(BIOS_ERR, "Transaction timeout between offset 0x%08x \
+ and 0x%08x (= 0x%08x + %d) HSFC=%x HSFS=%x!\n",
+ addr, addr + len - 1, addr, len - 1,
+ hsfc, hsfs);
+ return 1;
+ }
+
+ if (hsfs & HSFS_FCERR) {
+ uint16_t hsfc;
+ addr = readl_(&cntlr.pch_spi->faddr) & SPIBAR_FADDR_MASK;
+ hsfc = readw_(&cntlr.pch_spi->hsfc);
+ printk(BIOS_ERR, "Transaction error between offset 0x%08x and \
+ 0x%08x (= 0x%08x + %d) HSFC=%x HSFS=%x!\n",
+ addr, addr + len - 1, addr, len - 1,
+ hsfc, hsfs);
+ return 1;
+ }
+ return 0;
+}
+
+
+static int pch_hwseq_erase(struct spi_flash *flash, u32 offset, size_t len)
+{
+ u32 start, end, erase_size;
+ int ret;
+ uint16_t hsfc;
+ uint16_t timeout = 1000 * 60;
+
+ erase_size = flash->sector_size;
+ if (offset % erase_size || len % erase_size) {
+ printk(BIOS_ERR, "SF: Erase offset/length not multiple of erase size\n");
+ return -1;
+ }
+
+ flash->spi->rw = SPI_WRITE_FLAG;
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ printk(BIOS_ERR, "SF: Unable to claim SPI bus\n");
+ return ret;
+ }
+
+ start = offset;
+ end = start + len;
+
+ while (offset < end) {
+ /*
+ * Make sure FDONE, FCERR, AEL are
+ * cleared by writing 1 to them.
+ */
+ writew_(readw_(&cntlr.pch_spi->hsfs), &cntlr.pch_spi->hsfs);
+
+ pch_hwseq_set_addr(offset);
+
+ offset += erase_size;
+
+ hsfc = readw_(&cntlr.pch_spi->hsfc);
+ hsfc &= ~HSFC_FCYCLE; /* clear operation */
+ hsfc |= HSFC_FCYCLE; /* set erase operation */
+ hsfc |= HSFC_FGO; /* start */
+ writew_(hsfc, &cntlr.pch_spi->hsfc);
+ if (pch_hwseq_wait_for_cycle_complete(timeout, len)) {
+ printk(BIOS_ERR, "SF: Erase failed at %x\n",
+ offset - erase_size);
+ ret = -1;
+ goto out;
+ }
+ }
+
+ printk(BIOS_DEBUG, "SF: Successfully erased %zu bytes @ %#x\n",
+ len, start);
+
+out:
+ spi_release_bus(flash->spi);
+ return ret;
+}
+
+static void pch_read_data(uint8_t *data, int len)
+{
+ int i;
+ uint32_t temp32 = 0;
+
+ for (i = 0; i < len; i++) {
+ if ((i % 4) == 0)
+ temp32 = readl_(cntlr.data + i);
+
+ data[i] = (temp32 >> ((i % 4) * 8)) & 0xff;
+ }
+}
+
+static int pch_hwseq_read(struct spi_flash *flash,
+ u32 addr, size_t len, void *buf)
+{
+ uint16_t hsfc;
+ uint16_t timeout = 100 * 60;
+ uint8_t block_len;
+
+ if (addr + len > spi_get_flash_size()) {
+ printk(BIOS_ERR,
+ "Attempt to read %x-%x which is out of chip\n",
+ (unsigned) addr,
+ (unsigned) addr+(unsigned) len);
+ return -1;
+ }
+
+ /* clear FDONE, FCERR, AEL by writing 1 to them (if they are set) */
+ writew_(readw_(&cntlr.pch_spi->hsfs), &cntlr.pch_spi->hsfs);
+
+ while (len > 0) {
+ block_len = min(len, cntlr.databytes);
+ if (block_len > (~addr & 0xff))
+ block_len = (~addr & 0xff) + 1;
+ pch_hwseq_set_addr(addr);
+ hsfc = readw_(&cntlr.pch_spi->hsfc);
+ hsfc &= ~HSFC_FCYCLE; /* set read operation */
+ hsfc &= ~HSFC_FDBC; /* clear byte count */
+ /* set byte count */
+ hsfc |= (((block_len - 1) << HSFC_FDBC_OFF) & HSFC_FDBC);
+ hsfc |= HSFC_FGO; /* start */
+ writew_(hsfc, &cntlr.pch_spi->hsfc);
+
+ if (pch_hwseq_wait_for_cycle_complete(timeout, block_len))
+ return 1;
+ pch_read_data(buf, block_len);
+ addr += block_len;
+ buf += block_len;
+ len -= block_len;
+ }
+ return 0;
+}
+
+/* Fill len bytes from the data array into the fdata/spid registers.
+ *
+ * Note that using len > flash->pgm->spi.max_data_write will trash the registers
+ * following the data registers.
+ */
+static void pch_fill_data(const uint8_t *data, int len)
+{
+ uint32_t temp32 = 0;
+ int i;
+
+ if (len <= 0)
+ return;
+
+ for (i = 0; i < len; i++) {
+ if ((i % 4) == 0)
+ temp32 = 0;
+
+ temp32 |= ((uint32_t) data[i]) << ((i % 4) * 8);
+
+ if ((i % 4) == 3) /* 32 bits are full, write them to regs. */
+ writel_(temp32, cntlr.data + (i - (i % 4)));
+ }
+ i--;
+ if ((i % 4) != 3) /* Write remaining data to regs. */
+ writel_(temp32, cntlr.data + (i - (i % 4)));
+}
+
+static int pch_hwseq_write(struct spi_flash *flash,
+ u32 addr, size_t len, const void *buf)
+{
+ uint16_t hsfc;
+ uint16_t timeout = 100 * 60;
+ uint8_t block_len;
+ uint32_t start = addr;
+
+ if (addr + len > spi_get_flash_size()) {
+ printk(BIOS_ERR,
+ "Attempt to write 0x%x-0x%x which is out of chip\n",
+ (unsigned)addr, (unsigned) (addr+len));
+ return -1;
+ }
+
+ /* clear FDONE, FCERR, AEL by writing 1 to them (if they are set) */
+ writew_(readw_(&cntlr.pch_spi->hsfs), &cntlr.pch_spi->hsfs);
+
+ while (len > 0) {
+ block_len = min(len, cntlr.databytes);
+ if (block_len > (~addr & 0xff))
+ block_len = (~addr & 0xff) + 1;
+
+ pch_hwseq_set_addr(addr);
+
+ pch_fill_data(buf, block_len);
+ hsfc = readw_(&cntlr.pch_spi->hsfc);
+ hsfc &= ~HSFC_FCYCLE; /* clear operation */
+ hsfc |= HSFC_FCYCLE_WR; /* set write operation */
+ hsfc &= ~HSFC_FDBC; /* clear byte count */
+ /* set byte count */
+ hsfc |= (((block_len - 1) << HSFC_FDBC_OFF) & HSFC_FDBC);
+ hsfc |= HSFC_FGO; /* start */
+ writew_(hsfc, &cntlr.pch_spi->hsfc);
+
+ if (pch_hwseq_wait_for_cycle_complete(timeout, block_len)) {
+ printk(BIOS_ERR, "SF: write failure at %x\n", addr);
+ return -1;
+ }
+ addr += block_len;
+ buf += block_len;
+ len -= block_len;
+ }
+ printk(BIOS_DEBUG, "SF: Successfully written %u bytes @ %#x\n",
+ (unsigned) (addr - start), start);
+ return 0;
+}
+
+
+static struct spi_flash *spi_flash_hwseq_probe(struct spi_slave *spi)
+{
+ struct spi_flash *flash = NULL;
+ u32 berase;
+
+ flash = malloc(sizeof(*flash));
+ if (!flash) {
+ printk(BIOS_WARNING, "SF: Failed to allocate memory\n");
+ return NULL;
+ }
+
+ flash->spi = spi;
+ flash->name = "Opaque HW-sequencing";
+
+ flash->write = pch_hwseq_write;
+ flash->erase = pch_hwseq_erase;
+ flash->read = pch_hwseq_read;
+ pch_hwseq_set_addr(0);
+
+ berase = (cntlr.hsfs >> SPIBAR_HSFS_BERASE_OFFSET) &
+ SPIBAR_HSFS_BERASE_MASK;
+
+ switch (berase) {
+ case 0:
+ flash->sector_size = 256;
+ break;
+ case 1:
+ flash->sector_size = 4096;
+ break;
+ case 2:
+ flash->sector_size = 8192;
+ break;
+ case 3:
+ flash->sector_size = 65536;
+ break;
+ }
+
+ flash->size = spi_get_flash_size();
+
+ return flash;
+}
diff --git a/src/soc/intel/skylake/gpio.c b/src/soc/intel/skylake/gpio.c
index dc7d71371c..9f7b409e5c 100644
--- a/src/soc/intel/skylake/gpio.c
+++ b/src/soc/intel/skylake/gpio.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -11,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <stdint.h>
@@ -22,178 +19,305 @@
#include <arch/io.h>
#include <device/device.h>
#include <device/pci.h>
-#include <soc/gpio.h>
+#include <gpio.h>
+#include <soc/pcr.h>
#include <soc/iomap.h>
#include <soc/pm.h>
+/* Keep the ordering intact GPP_A ~ G, GPD.
+ * As the gpio/smi functions get_smi_status() and
+ * enable_gpio_groupsmi() depends on this ordering.
+ */
+static const GPIO_GROUP_INFO gpio_group_info[] = {
+ /* GPP_A */
+ {
+ .community = PID_GPIOCOM0,
+ .padcfgoffset = R_PCH_PCR_GPIO_GPP_A_PADCFG_OFFSET,
+ .padpergroup = V_PCH_GPIO_GPP_A_PAD_MAX,
+ .smistsoffset = R_PCH_PCR_GPIO_GPP_A_SMI_STS,
+ .smienoffset = R_PCH_PCR_GPIO_GPP_A_SMI_EN,
+ },
+ /* GPP_B */
+ {
+ .community = PID_GPIOCOM0,
+ .padcfgoffset = R_PCH_PCR_GPIO_GPP_B_PADCFG_OFFSET,
+ .padpergroup = V_PCH_GPIO_GPP_B_PAD_MAX,
+ .smistsoffset = R_PCH_PCR_GPIO_GPP_B_SMI_STS,
+ .smienoffset = R_PCH_PCR_GPIO_GPP_B_SMI_EN,
+ },
+ /* GPP_C */
+ {
+ .community = PID_GPIOCOM1,
+ .padcfgoffset = R_PCH_PCR_GPIO_GPP_C_PADCFG_OFFSET,
+ .padpergroup = V_PCH_GPIO_GPP_C_PAD_MAX,
+ .smistsoffset = R_PCH_PCR_GPIO_GPP_C_SMI_STS,
+ .smienoffset = R_PCH_PCR_GPIO_GPP_C_SMI_EN,
+ },
+ /* GPP_D */
+ {
+ .community = PID_GPIOCOM1,
+ .padcfgoffset = R_PCH_PCR_GPIO_GPP_D_PADCFG_OFFSET,
+ .padpergroup = V_PCH_GPIO_GPP_D_PAD_MAX,
+ .smistsoffset = R_PCH_PCR_GPIO_GPP_D_SMI_STS,
+ .smienoffset = R_PCH_PCR_GPIO_GPP_D_SMI_EN,
+ },
+ /* GPP_E */
+ {
+ .community = PID_GPIOCOM1,
+ .padcfgoffset = R_PCH_PCR_GPIO_GPP_E_PADCFG_OFFSET,
+ .padpergroup = V_PCH_GPIO_GPP_E_PAD_MAX,
+ .smistsoffset = R_PCH_PCR_GPIO_GPP_E_SMI_STS,
+ .smienoffset = R_PCH_PCR_GPIO_GPP_E_SMI_EN,
+ },
+ /* GPP_F */
+ {
+ .community = PID_GPIOCOM3,
+ .padcfgoffset = R_PCH_PCR_GPIO_GPP_F_PADCFG_OFFSET,
+ .padpergroup = V_PCH_GPIO_GPP_F_PAD_MAX,
+ .smistsoffset = NO_REGISTER_PROPERTY,
+ .smienoffset = NO_REGISTER_PROPERTY,
+ },
+ /* GPP_G */
+ {
+ .community = PID_GPIOCOM3,
+ .padcfgoffset = R_PCH_PCR_GPIO_GPP_G_PADCFG_OFFSET,
+ .padpergroup = V_PCH_GPIO_GPP_G_PAD_MAX,
+ .smistsoffset = NO_REGISTER_PROPERTY,
+ .smienoffset = NO_REGISTER_PROPERTY,
+ },
+ /* GPP_H */
+ {
+ .community = PID_GPIOCOM2,
+ .padcfgoffset = R_PCH_PCR_GPIO_GPD_PADCFG_OFFSET,
+ .padpergroup = V_PCH_GPIO_GPD_PAD_MAX,
+ .smistsoffset = NO_REGISTER_PROPERTY,
+ .smienoffset = NO_REGISTER_PROPERTY,
+ },
+};
+
/*
- * This function will return a number that indicates which PIRQ
- * this GPIO maps to. If this is not a PIRQ capable GPIO then
- * it will return -1. The GPIO to PIRQ mapping is not linear.
+ * SPT has 7 GPIO communities named as GPP_A to GPP_G.
+ * Each community has 24 GPIO PIN.
+ * Below formula to calculate GPIO Pin from GPIO PAD.
+ * PIN# = GROUP_PAD# + GROUP# * 24
+ * ====================================
+ * Community || Group#
+ * ====================================
+ * GPP_A || 0
+ * GPP_B || 1
+ * GPP_C || 2
+ * GPP_D || 3
+ * GPP_E || 4
+ * GPP_F || 5
+ * GPP_G || 6
*/
-static int gpio_to_pirq(int gpio)
+static u32 get_padnumber_from_gpiopad(GPIO_PAD gpiopad)
{
- switch (gpio) {
- case 8: return 0; /* PIRQI */
- case 9: return 1; /* PIRQJ */
- case 10: return 2; /* PIRQK */
- case 13: return 3; /* PIRQL */
- case 14: return 4; /* PIRQM */
- case 45: return 5; /* PIRQN */
- case 46: return 6; /* PIRQO */
- case 47: return 7; /* PIRQP */
- case 48: return 8; /* PIRQQ */
- case 49: return 9; /* PIRQR */
- case 50: return 10; /* PIRQS */
- case 51: return 11; /* PIRQT */
- case 52: return 12; /* PIRQU */
- case 53: return 13; /* PIRQV */
- case 54: return 14; /* PIRQW */
- case 55: return 15; /* PIRQX */
- default: return -1;
- };
+ return (u32) GPIO_GET_PAD_NUMBER(gpiopad);
}
-void init_one_gpio(int gpio_num, struct gpio_config *config)
+static u32 get_groupindex_from_gpiopad(GPIO_PAD gpiopad)
{
- u32 owner, route, irqen, reset;
- int set, bit;
+ return (u32) GPIO_GET_GROUP_INDEX_FROM_PAD(gpiopad);
+}
- if (gpio_num > MAX_GPIO_NUMBER || !config)
- return;
+static int read_write_gpio_pad_reg(u32 gpiopad, u8 dwreg, u32 mask, int write,
+ u32 *readwriteval)
+{
+ u32 padcfgreg;
+ u32 gpiogroupinfolength;
+ u32 groupindex;
+ u32 padnumber;
- outl(config->conf0, GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num));
- outl(config->conf1, GPIO_BASE_ADDRESS + GPIO_CONFIG1(gpio_num));
-
- /* Determine set and bit based on GPIO number */
- set = gpio_num >> 5;
- bit = gpio_num % 32;
-
- /* Save settings from current GPIO config */
- owner = inl(GPIO_BASE_ADDRESS + GPIO_OWNER(set));
- route = inl(GPIO_BASE_ADDRESS + GPIO_ROUTE(set));
- irqen = inl(GPIO_BASE_ADDRESS + GPIO_IRQ_IE(set));
- reset = inl(GPIO_BASE_ADDRESS + GPIO_RESET(set));
-
- owner |= config->owner << bit;
- route |= config->route << bit;
- irqen |= config->irqen << bit;
- reset |= config->reset << bit;
-
- outl(owner, GPIO_BASE_ADDRESS + GPIO_OWNER(set));
- outl(route, GPIO_BASE_ADDRESS + GPIO_ROUTE(set));
- outl(irqen, GPIO_BASE_ADDRESS + GPIO_IRQ_IE(set));
- outl(reset, GPIO_BASE_ADDRESS + GPIO_RESET(set));
-
- if (set == 0) {
- u32 blink = inl(GPIO_BASE_ADDRESS + GPIO_BLINK);
- blink |= config->blink << bit;
- outl(blink, GPIO_BASE_ADDRESS + GPIO_BLINK);
- }
+ groupindex = get_groupindex_from_gpiopad(gpiopad);
+ padnumber = get_padnumber_from_gpiopad(gpiopad);
+
+ gpiogroupinfolength = sizeof(gpio_group_info) / sizeof(GPIO_GROUP_INFO);
- /* PIRQ to IO-APIC map */
- if (config->pirq == GPIO_PIRQ_APIC_ROUTE) {
- u32 pirq2apic = inl(GPIO_BASE_ADDRESS + GPIO_PIRQ_APIC_EN);
- set = gpio_to_pirq(gpio_num);
- if (set >= 0) {
- pirq2apic |= 1 << set;
- outl(pirq2apic, GPIO_BASE_ADDRESS + GPIO_PIRQ_APIC_EN);
- }
+ /* Check if group argument exceeds GPIO GROUP INFO array */
+ if ((u32) groupindex >= gpiogroupinfolength)
+ return -1;
+ /* Check if legal pin number */
+ if (padnumber >= gpio_group_info[groupindex].padpergroup)
+ return -1;
+ /* Create Pad Configuration register offset */
+ padcfgreg = 0x8 * padnumber + gpio_group_info[groupindex].padcfgoffset;
+ if (dwreg == 1)
+ padcfgreg += 0x4;
+ if (write) {
+ pcr_andthenor32(gpio_group_info[groupindex].community,
+ padcfgreg, (u32) (~mask),
+ (u32) (*readwriteval & mask));
+ } else {
+ pcr_read32(gpio_group_info[groupindex].community, padcfgreg,
+ readwriteval);
+ *readwriteval &= mask;
}
+
+ return 0;
}
-void init_gpios(const struct gpio_config config[])
+static int convert_gpio_num_to_pad(gpio_t gpionum)
{
- const struct gpio_config *entry;
- u32 owner[3] = {0};
- u32 route[3] = {0};
- u32 irqen[3] = {0};
- u32 reset[3] = {0};
- u32 blink = 0;
- u16 pirq2apic = 0;
- int set, bit, gpio = 0;
-
- for (entry = config; entry->conf0 != GPIO_LIST_END; entry++, gpio++) {
- if (gpio > MAX_GPIO_NUMBER)
- break;
-
- /* Setup Configuration registers 1 and 2 */
- outl(entry->conf0, GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio));
- outl(entry->conf1, GPIO_BASE_ADDRESS + GPIO_CONFIG1(gpio));
-
- /* Determine set and bit based on GPIO number */
- set = gpio >> 5;
- bit = gpio % 32;
-
- /* Apply settings to set specific bits */
- owner[set] |= entry->owner << bit;
- route[set] |= entry->route << bit;
- irqen[set] |= entry->irqen << bit;
- reset[set] |= entry->reset << bit;
-
- if (set == 0)
- blink |= entry->blink << bit;
-
- /* PIRQ to IO-APIC map */
- if (entry->pirq == GPIO_PIRQ_APIC_ROUTE) {
- set = gpio_to_pirq(gpio);
- if (set >= 0)
- pirq2apic |= 1 << set;
- }
- }
+ int group_pad_num = 0;
+ int gpio_group = 0;
+ u32 gpio_pad = 0;
+
+ group_pad_num = (gpionum % MAX_GPIO_PIN_PER_GROUP);
+ gpio_group = (gpionum / MAX_GPIO_PIN_PER_GROUP);
+
+ switch (gpio_group) {
+ case GPIO_LP_GROUP_A:
+ gpio_pad = GPIO_LP_GROUP_GPP_A;
+ break;
- for (set = 0; set <= 2; set++) {
- outl(owner[set], GPIO_BASE_ADDRESS + GPIO_OWNER(set));
- outl(route[set], GPIO_BASE_ADDRESS + GPIO_ROUTE(set));
- outl(irqen[set], GPIO_BASE_ADDRESS + GPIO_IRQ_IE(set));
- outl(reset[set], GPIO_BASE_ADDRESS + GPIO_RESET(set));
+ case GPIO_LP_GROUP_B:
+ gpio_pad = GPIO_LP_GROUP_GPP_B;
+ break;
+
+ case GPIO_LP_GROUP_C:
+ gpio_pad = GPIO_LP_GROUP_GPP_C;
+ break;
+
+ case GPIO_LP_GROUP_D:
+ gpio_pad = GPIO_LP_GROUP_GPP_D;
+ break;
+
+ case GPIO_LP_GROUP_E:
+ gpio_pad = GPIO_LP_GROUP_GPP_E;
+ break;
+
+ case GPIO_LP_GROUP_F:
+ gpio_pad = GPIO_LP_GROUP_GPP_F;
+ break;
+
+ case GPIO_LP_GROUP_G:
+ gpio_pad = GPIO_LP_GROUP_GPP_G;
+ break;
+ default:
+ return -1;
+ break;
}
+ gpio_pad = (gpio_pad << GPIO_GROUP_SHIFT) + group_pad_num;
- outl(blink, GPIO_BASE_ADDRESS + GPIO_BLINK);
- outl(pirq2apic, GPIO_BASE_ADDRESS + GPIO_PIRQ_APIC_EN);
+ return gpio_pad;
}
-int get_gpio(int gpio_num)
+int gpio_get(gpio_t gpio_num)
{
+ u32 gpiopad = 0;
+ u32 outputvalue = 0;
+ int status = 0;
+
if (gpio_num > MAX_GPIO_NUMBER)
return 0;
- return !!(inl(GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num)) & GPI_LEVEL);
+ gpiopad = convert_gpio_num_to_pad(gpio_num);
+ if (gpiopad < 0)
+ return -1;
+
+ status = read_write_gpio_pad_reg(gpiopad,
+ 0,
+ B_PCH_GPIO_TX_STATE,
+ READ, &outputvalue);
+ outputvalue >>= N_PCH_GPIO_TX_STATE;
+ return outputvalue;
}
-/*
- * get a number comprised of multiple GPIO values. gpio_num_array points to
- * the array of gpio pin numbers to scan, terminated by -1.
- */
-unsigned get_gpios(const int *gpio_num_array)
+void gpio_set(gpio_t gpio_num, int value)
{
- int gpio;
- unsigned bitmask = 1;
- unsigned vector = 0;
-
- while (bitmask &&
- ((gpio = *gpio_num_array++) != -1)) {
- if (get_gpio(gpio))
- vector |= bitmask;
- bitmask <<= 1;
+ int status = 0;
+ u32 gpiopad = 0;
+ u32 outputvalue = 0;
+
+ if (gpio_num > MAX_GPIO_NUMBER)
+ return;
+
+ gpiopad = convert_gpio_num_to_pad(gpio_num);
+ if (gpiopad < 0)
+ return;
+
+ outputvalue = value;
+
+ status = read_write_gpio_pad_reg(gpiopad,
+ 0,
+ B_PCH_GPIO_TX_STATE,
+ WRITE, &outputvalue);
+}
+
+void clear_all_smi(void)
+{
+ u32 gpiogroupinfolength;
+ u32 gpioindex = 0;
+
+ gpiogroupinfolength = sizeof(gpio_group_info) / sizeof(GPIO_GROUP_INFO);
+
+ for (gpioindex = 0; gpioindex < gpiogroupinfolength; gpioindex++) {
+ /*Check if group has GPI SMI register */
+ if (gpio_group_info[gpioindex].smistsoffset ==
+ NO_REGISTER_PROPERTY)
+ continue;
+ /* Clear all GPI SMI Status bits by writing '1' */
+ pcr_write32(gpio_group_info[gpioindex].community,
+ gpio_group_info[gpioindex].smistsoffset,
+ 0xFFFFFFFF);
}
- return vector;
}
-void set_gpio(int gpio_num, int value)
+void get_smi_status(u32 status[GPIO_COMMUNITY_MAX])
{
- u32 conf0;
+ u32 num_of_communities;
+ u32 gpioindex;
+ u32 outputvalue = 0;
- if (gpio_num > MAX_GPIO_NUMBER)
- return;
+ num_of_communities = ARRAY_SIZE(gpio_group_info);
- conf0 = inl(GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num));
- conf0 &= ~GPO_LEVEL_MASK;
- conf0 |= value << GPO_LEVEL_SHIFT;
- outl(conf0, GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num));
+ for (gpioindex = 0; gpioindex < num_of_communities; gpioindex++) {
+ /*Check if group has GPI SMI register */
+ if (gpio_group_info[gpioindex].smistsoffset ==
+ NO_REGISTER_PROPERTY)
+ continue;
+ /* Read SMI status register */
+ pcr_read32(gpio_group_info[gpioindex].community,
+ gpio_group_info[gpioindex].smistsoffset,
+ &outputvalue);
+ status[gpioindex] = outputvalue;
+ }
}
-int gpio_is_native(int gpio_num)
+void enable_all_smi(void)
{
- return !(inl(GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num)) & 1);
+ u32 gpiogroupinfolength;
+ u32 gpioindex = 0;
+
+ gpiogroupinfolength = sizeof(gpio_group_info) / sizeof(GPIO_GROUP_INFO);
+
+ for (gpioindex = 0; gpioindex < gpiogroupinfolength; gpioindex++) {
+ /*Check if group has GPI SMI register */
+ if (gpio_group_info[gpioindex].smienoffset ==
+ NO_REGISTER_PROPERTY)
+ continue;
+ /* Set all GPI SMI Enable bits by writing '1' */
+ pcr_write32(gpio_group_info[gpioindex].community,
+ gpio_group_info[gpioindex].smienoffset,
+ 0xFFFFFFFF);
+ }
+}
+
+void enable_gpio_groupsmi(gpio_t gpio_num, u32 mask)
+{
+ u32 gpioindex = 0;
+ u32 smien = 0;
+
+ if (gpio_num > MAX_GPIO_NUMBER)
+ return;
+
+ gpioindex = (gpio_num / MAX_GPIO_PIN_PER_GROUP);
+
+ pcr_read32(gpio_group_info[gpioindex].community,
+ gpio_group_info[gpioindex].smienoffset, &smien);
+ smien |= mask;
+ /* Set all GPI SMI Enable bits by writing '1' */
+ pcr_write32(gpio_group_info[gpioindex].community,
+ gpio_group_info[gpioindex].smienoffset, smien);
}
diff --git a/src/soc/intel/skylake/hda.c b/src/soc/intel/skylake/hda.c
deleted file mode 100644
index b2992e85b2..0000000000
--- a/src/soc/intel/skylake/hda.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008 Advanced Micro Devices, Inc.
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <arch/io.h>
-#include <delay.h>
-#include <soc/intel/common/hda_verb.h>
-#include <soc/pch.h>
-#include <soc/ramstage.h>
-#include <soc/rcba.h>
-
-const u32 * cim_verb_data = NULL;
-u32 cim_verb_data_size = 0;
-const u32 * pc_beep_verbs = NULL;
-u32 pc_beep_verbs_size = 0;
-
-static void codecs_init(u8 *base, u32 codec_mask)
-{
- int i;
-
- /* Can support up to 4 codecs */
- for (i = 3; i >= 0; i--) {
- if (codec_mask & (1 << i))
- hda_codec_init(base, i,
- cim_verb_data_size,
- cim_verb_data);
- }
-
- if (pc_beep_verbs_size && pc_beep_verbs)
- hda_codec_write(base, pc_beep_verbs_size, pc_beep_verbs);
-}
-
-static void hda_pch_init(struct device *dev, u8 *base)
-{
- u8 reg8;
- u16 reg16;
- u32 reg32;
-
- if (RCBA32(0x2030) & (1 << 31)) {
- reg32 = pci_read_config32(dev, 0x120);
- reg32 &= 0xf8ffff01;
- reg32 |= (1 << 25);
- reg32 |= RCBA32(0x2030) & 0xfe;
- pci_write_config32(dev, 0x120, reg32);
- } else
- printk(BIOS_DEBUG, "HDA: V1CTL disabled.\n");
-
- reg32 = pci_read_config32(dev, 0x114);
- reg32 &= ~0xfe;
- pci_write_config32(dev, 0x114, reg32);
-
- // Set VCi enable bit
- if (pci_read_config32(dev, 0x120) & ((1 << 24) |
- (1 << 25) | (1 << 26))) {
- reg32 = pci_read_config32(dev, 0x120);
- reg32 &= ~(1 << 31);
- pci_write_config32(dev, 0x120, reg32);
- }
-
- /* Additional programming steps */
- reg32 = pci_read_config32(dev, 0xc4);
- reg32 |= (1 << 24);
- pci_write_config32(dev, 0xc4, reg32);
-
- reg8 = pci_read_config8(dev, 0x40); // Audio Control
- reg8 |= 1; // Select HDA mode
- pci_write_config8(dev, 0x40, reg8);
-
- reg8 = pci_read_config8(dev, 0x4d); // Docking Status
- reg8 &= ~(1 << 7); // Docking not supported
- pci_write_config8(dev, 0x4d, reg8);
-
- reg16 = read32(base + 0x0012);
- reg16 |= (1 << 0);
- write32(base + 0x0012, reg16);
-
- /* disable Auto Voltage Detector */
- reg8 = pci_read_config8(dev, 0x42);
- reg8 |= (1 << 2);
- pci_write_config8(dev, 0x42, reg8);
-}
-
-static void hda_init(struct device *dev)
-{
- u8 *base;
- struct resource *res;
- u32 codec_mask;
- u32 reg32;
-
- /* Find base address */
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (!res)
- return;
-
- base = res2mmio(res, 0, 0);
- printk(BIOS_DEBUG, "HDA: base = %p\n", base);
-
- /* Set Bus Master */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
-
- hda_pch_init(dev, base);
-
- codec_mask = hda_codec_detect(base);
-
- if (codec_mask) {
- printk(BIOS_DEBUG, "HDA: codec_mask = %02x\n", codec_mask);
- codecs_init(base, codec_mask);
- }
-}
-
-static void hda_enable(struct device *dev)
-{
- u32 reg32;
- u8 reg8;
-
- reg8 = pci_read_config8(dev, 0x43);
- reg8 |= 0x6f;
- pci_write_config8(dev, 0x43, reg8);
-
- if (!dev->enabled) {
- /* Route I/O buffers to ADSP function */
- reg8 = pci_read_config8(dev, 0x42);
- reg8 |= (1 << 7) | (1 << 6);
- pci_write_config8(dev, 0x42, reg8);
-
- printk(BIOS_INFO, "HDA disabled, I/O buffers routed to ADSP\n");
-
- /* Ensure memory, io, and bus master are all disabled */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 &= ~(PCI_COMMAND_MASTER |
- PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
- pci_write_config32(dev, PCI_COMMAND, reg32);
-
- /* Disable this device */
- pch_disable_devfn(dev);
- }
-}
-
-static struct device_operations hda_ops = {
- .read_resources = &pci_dev_read_resources,
- .set_resources = &pci_dev_set_resources,
- .enable_resources = &pci_dev_enable_resources,
- .init = &hda_init,
- .enable = &hda_enable,
- .ops_pci = &broadwell_pci_ops,
-};
-
-static const unsigned short pci_device_ids[] = {
- 0x9c20, /* LynxPoint-LP */
- 0x9ca0, /* WildcatPoint */
- 0
-};
-
-static const struct pci_driver pch_hda __pci_driver = {
- .ops = &hda_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .devices = pci_device_ids,
-};
diff --git a/src/soc/intel/skylake/igd.c b/src/soc/intel/skylake/igd.c
index 86da0a9cb2..25d89c3e89 100644
--- a/src/soc/intel/skylake/igd.c
+++ b/src/soc/intel/skylake/igd.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,12 +15,12 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/acpi.h>
#include <arch/io.h>
-#include <bootmode.h>
+#include <chip.h>
#include <console/console.h>
#include <delay.h>
#include <device/device.h>
@@ -33,214 +34,13 @@
#include <soc/pm.h>
#include <soc/ramstage.h>
#include <soc/systemagent.h>
-#include <soc/intel/broadwell/chip.h>
#include <vendorcode/google/chromeos/chromeos.h>
-#define GT_RETRY 1000
+#define GT_RETRY 1000
#define GT_CDCLK_337 0
#define GT_CDCLK_450 1
#define GT_CDCLK_540 2
#define GT_CDCLK_675 3
-
-struct reg_script haswell_early_init_script[] = {
- /* Enable Force Wake */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa180, 0x00000020),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00010001),
- REG_RES_POLL32(PCI_BASE_ADDRESS_0, FORCEWAKE_ACK_HSW, 1, 1, GT_RETRY),
-
- /* Enable Counters */
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa248, 0x00000016),
-
- /* GFXPAUSE settings */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa000, 0x00070020),
-
- /* ECO Settings */
- REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0xa180, 0xff3fffff, 0x15000000),
-
- /* Enable DOP Clock Gating */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9424, 0x000003fd),
-
- /* Enable Unit Level Clock Gating */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9400, 0x00000080),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9404, 0x40401000),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9408, 0x00000000),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x940c, 0x02000001),
-
- /*
- * RC6 Settings
- */
-
- /* Wake Rate Limits */
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa090, 0x00000000),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa098, 0x03e80000),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa09c, 0x00280000),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0a8, 0x0001e848),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0ac, 0x00000019),
-
- /* Render/Video/Blitter Idle Max Count */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x02054, 0x0000000a),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x12054, 0x0000000a),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x22054, 0x0000000a),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x1a054, 0x0000000a),
-
- /* RC Sleep / RCx Thresholds */
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0b0, 0x00000000),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0b4, 0x000003e8),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0b8, 0x0000c350),
-
- /* RP Settings */
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa010, 0x000f4240),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa014, 0x12060000),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa02c, 0x0000e808),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa030, 0x0003bd08),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa068, 0x000101d0),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa06c, 0x00055730),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa070, 0x0000000a),
-
- /* RP Control */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa024, 0x00000b92),
-
- /* HW RC6 Control */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa090, 0x88040000),
-
- /* Video Frequency Request */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa00c, 0x08000000),
-
- /* Set RC6 VIDs */
- REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x138124, (1 << 31), 0, GT_RETRY),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138128, 0),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138124, 0x80000004),
- REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x138124, (1 << 31), 0, GT_RETRY),
-
- /* Enable PM Interrupts */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x4402c, 0x03000076),
-
- /* Enable RC6 in idle */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa094, 0x00040000),
-
- REG_SCRIPT_END
-};
-
-static const struct reg_script haswell_late_init_script[] = {
- /* Lock settings */
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a248, (1 << 31)),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a004, (1 << 4)),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a080, (1 << 2)),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a180, (1 << 31)),
-
- /* Disable Force Wake */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00010000),
- REG_RES_POLL32(PCI_BASE_ADDRESS_0, FORCEWAKE_ACK_HSW, 1, 0, GT_RETRY),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00000001),
-
- /* Enable power well for DP and Audio */
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x45400, (1 << 31)),
- REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x45400,
- (1 << 30), (1 << 30), GT_RETRY),
-
- REG_SCRIPT_END
-};
-
-static const struct reg_script broadwell_early_init_script[] = {
- /* Enable Force Wake */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00010001),
- REG_RES_POLL32(PCI_BASE_ADDRESS_0, FORCEWAKE_ACK_HSW, 1, 1, GT_RETRY),
-
- /* Enable push bus metric control and shift */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa248, 0x00000004),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa250, 0x000000ff),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa25c, 0x00000010),
-
- /* GFXPAUSE settings (set based on stepping) */
-
- /* ECO Settings */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa180, 0x45200000),
-
- /* Enable DOP Clock Gating */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9424, 0x000000fd),
-
- /* Enable Unit Level Clock Gating */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9400, 0x00000000),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9404, 0x40401000),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9408, 0x00000000),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x940c, 0x02000001),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x1a054, 0x0000000a),
-
- /* Video Frequency Request */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa00c, 0x08000000),
-
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138158, 0x00000009),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x13815c, 0x0000000d),
-
- /*
- * RC6 Settings
- */
-
- /* Wake Rate Limits */
- REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x0a090, 0, 0),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a098, 0x03e80000),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a09c, 0x00280000),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a0a8, 0x0001e848),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a0ac, 0x00000019),
-
- /* Render/Video/Blitter Idle Max Count */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x02054, 0x0000000a),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x12054, 0x0000000a),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x22054, 0x0000000a),
-
- /* RC Sleep / RCx Thresholds */
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a0b0, 0x00000000),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a0b8, 0x00000271),
-
- /* RP Settings */
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a010, 0x000f4240),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a014, 0x12060000),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a02c, 0x0000e808),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a030, 0x0003bd08),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a068, 0x000101d0),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a06c, 0x00055730),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a070, 0x0000000a),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a168, 0x00000006),
-
- /* RP Control */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa024, 0x00000b92),
-
- /* HW RC6 Control */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa090, 0x90040000),
-
- /* Set RC6 VIDs */
- REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x138124, (1 << 31), 0, GT_RETRY),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138128, 0),
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138124, 0x80000004),
- REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x138124, (1 << 31), 0, GT_RETRY),
-
- /* Enable PM Interrupts */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x4402c, 0x03000076),
-
- /* Enable RC6 in idle */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa094, 0x00040000),
-
- REG_SCRIPT_END
-};
-
-static const struct reg_script broadwell_late_init_script[] = {
- /* Lock settings */
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a248, (1 << 31)),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a000, (1 << 18)),
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a180, (1 << 31)),
-
- /* Disable Force Wake */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00010000),
- REG_RES_POLL32(PCI_BASE_ADDRESS_0, FORCEWAKE_ACK_HSW, 1, 0, GT_RETRY),
-
- /* Enable power well for DP and Audio */
- REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x45400, (1 << 31)),
- REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x45400,
- (1 << 30), (1 << 30), GT_RETRY),
-
- REG_SCRIPT_END
-};
-
u32 map_oprom_vendev(u32 vendev)
{
return SA_IGD_OPROM_VENDEV;
@@ -251,14 +51,13 @@ static struct resource *gtt_res = NULL;
static unsigned long gtt_read(unsigned long reg)
{
u32 val;
- val = read32(res2mmio(gtt_res, reg, 0));
+ val = read32((void *)(unsigned int)(gtt_res->base + reg));
return val;
-
}
static void gtt_write(unsigned long reg, unsigned long data)
{
- write32(res2mmio(gtt_res, reg, 0), data);
+ write32((void *)(unsigned int)(gtt_res->base + reg), data);
}
static inline void gtt_rmw(u32 reg, u32 andmask, u32 ormask)
@@ -269,216 +68,8 @@ static inline void gtt_rmw(u32 reg, u32 andmask, u32 ormask)
gtt_write(reg, val);
}
-static int gtt_poll(u32 reg, u32 mask, u32 value)
-{
- unsigned try = GT_RETRY;
- u32 data;
-
- while (try--) {
- data = gtt_read(reg);
- if ((data & mask) == value)
- return 1;
- udelay(10);
- }
-
- printk(BIOS_ERR, "GT init timeout\n");
- return 0;
-}
-
-static void igd_setup_panel(struct device *dev)
-{
- config_t *conf = dev->chip_info;
- u32 reg32;
-
- /* Setup Digital Port Hotplug */
- reg32 = gtt_read(PCH_PORT_HOTPLUG);
- if (!reg32) {
- reg32 = (conf->gpu_dp_b_hotplug & 0x7) << 2;
- reg32 |= (conf->gpu_dp_c_hotplug & 0x7) << 10;
- reg32 |= (conf->gpu_dp_d_hotplug & 0x7) << 18;
- gtt_write(PCH_PORT_HOTPLUG, reg32);
- }
-
- /* Setup Panel Power On Delays */
- reg32 = gtt_read(PCH_PP_ON_DELAYS);
- if (!reg32) {
- reg32 = (conf->gpu_panel_port_select & 0x3) << 30;
- reg32 |= (conf->gpu_panel_power_up_delay & 0x1fff) << 16;
- reg32 |= (conf->gpu_panel_power_backlight_on_delay & 0x1fff);
- gtt_write(PCH_PP_ON_DELAYS, reg32);
- }
-
- /* Setup Panel Power Off Delays */
- reg32 = gtt_read(PCH_PP_OFF_DELAYS);
- if (!reg32) {
- reg32 = (conf->gpu_panel_power_down_delay & 0x1fff) << 16;
- reg32 |= (conf->gpu_panel_power_backlight_off_delay & 0x1fff);
- gtt_write(PCH_PP_OFF_DELAYS, reg32);
- }
-
- /* Setup Panel Power Cycle Delay */
- if (conf->gpu_panel_power_cycle_delay) {
- reg32 = gtt_read(PCH_PP_DIVISOR);
- reg32 &= ~0xff;
- reg32 |= conf->gpu_panel_power_cycle_delay & 0xff;
- gtt_write(PCH_PP_DIVISOR, reg32);
- }
-
- /* Enable Backlight if needed */
- if (conf->gpu_cpu_backlight) {
- gtt_write(BLC_PWM_CPU_CTL2, BLC_PWM2_ENABLE);
- gtt_write(BLC_PWM_CPU_CTL, conf->gpu_cpu_backlight);
- }
- if (conf->gpu_pch_backlight) {
- gtt_write(BLC_PWM_PCH_CTL1, BLM_PCH_PWM_ENABLE);
- gtt_write(BLC_PWM_PCH_CTL2, conf->gpu_pch_backlight);
- }
-}
-
-static void igd_cdclk_init_haswell(struct device *dev)
-{
- config_t *conf = dev->chip_info;
- int cdclk = conf->cdclk;
- int devid = pci_read_config16(dev, PCI_DEVICE_ID);
- int gpu_is_ulx = 0;
- u32 dpdiv, lpcll;
-
- /* Check for ULX GT1 or GT2 */
- if (devid == 0x0a0e || devid == 0x0a1e)
- gpu_is_ulx = 1;
-
- /* 675MHz is not supported on haswell */
- if (cdclk == GT_CDCLK_675)
- cdclk = GT_CDCLK_337;
-
- /* If CD clock is fixed or ULT then set to 450MHz */
- if ((gtt_read(0x42014) & 0x1000000) || cpu_is_ult())
- cdclk = GT_CDCLK_450;
-
- /* 540MHz is not supported on ULX */
- if (gpu_is_ulx && cdclk == GT_CDCLK_540)
- cdclk = GT_CDCLK_337;
-
- /* 337.5MHz is not supported on non-ULT/ULX */
- if (!gpu_is_ulx && !cpu_is_ult() && cdclk == GT_CDCLK_337)
- cdclk = GT_CDCLK_450;
-
- /* Set variables based on CD Clock setting */
- switch (cdclk) {
- case GT_CDCLK_337:
- dpdiv = 169;
- lpcll = (1 << 26);
- break;
- case GT_CDCLK_450:
- dpdiv = 225;
- lpcll = 0;
- break;
- case GT_CDCLK_540:
- dpdiv = 270;
- lpcll = (1 << 26);
- break;
- default:
- return;
- }
-
- /* Set LPCLL_CTL CD Clock Frequency Select */
- gtt_rmw(0x130040, 0xf3ffffff, lpcll);
-
- /* ULX: Inform power controller of selected frequency */
- if (gpu_is_ulx) {
- if (cdclk == GT_CDCLK_450)
- gtt_write(0x138128, 0x00000000); /* 450MHz */
- else
- gtt_write(0x138128, 0x00000001); /* 337.5MHz */
- gtt_write(0x13812c, 0x00000000);
- gtt_write(0x138124, 0x80000017);
- }
-
- /* Set CPU DP AUX 2X bit clock dividers */
- gtt_rmw(0x64010, 0xfffff800, dpdiv);
- gtt_rmw(0x64810, 0xfffff800, dpdiv);
-}
-
-static void igd_cdclk_init_broadwell(struct device *dev)
-{
- config_t *conf = dev->chip_info;
- int cdclk = conf->cdclk;
- u32 dpdiv, lpcll, pwctl, cdset;
-
- /* Inform power controller of upcoming frequency change */
- gtt_write(0x138128, 0);
- gtt_write(0x13812c, 0);
- gtt_write(0x138124, 0x80000018);
-
- /* Poll GT driver mailbox for run/busy clear */
- if (!gtt_poll(0x138124, (1 << 31), (0 << 31)))
- cdclk = GT_CDCLK_450;
-
- if (gtt_read(0x42014) & 0x1000000) {
- /* If CD clock is fixed then set to 450MHz */
- cdclk = GT_CDCLK_450;
- } else {
- /* Program CD clock to highest supported freq */
- if (cpu_is_ult())
- cdclk = GT_CDCLK_540;
- else
- cdclk = GT_CDCLK_675;
- }
-
- /* CD clock frequency 675MHz not supported on ULT */
- if (cpu_is_ult() && cdclk == GT_CDCLK_675)
- cdclk = GT_CDCLK_540;
-
- /* Set variables based on CD Clock setting */
- switch (cdclk) {
- case GT_CDCLK_337:
- cdset = 337;
- lpcll = (1 << 27);
- pwctl = 2;
- dpdiv = 169;
- break;
- case GT_CDCLK_450:
- cdset = 449;
- lpcll = 0;
- pwctl = 0;
- dpdiv = 225;
- break;
- case GT_CDCLK_540:
- cdset = 539;
- lpcll = (1 << 26);
- pwctl = 1;
- dpdiv = 270;
- break;
- case GT_CDCLK_675:
- cdset = 674;
- lpcll = (1 << 26) | (1 << 27);
- pwctl = 3;
- dpdiv = 338;
- default:
- return;
- }
-
- /* Set LPCLL_CTL CD Clock Frequency Select */
- gtt_rmw(0x130040, 0xf3ffffff, lpcll);
-
- /* Inform power controller of selected frequency */
- gtt_write(0x138128, pwctl);
- gtt_write(0x13812c, 0);
- gtt_write(0x138124, 0x80000017);
-
- /* Program CD Clock Frequency */
- gtt_rmw(0x46200, 0xfffffc00, cdset);
-
- /* Set CPU DP AUX 2X bit clock dividers */
- gtt_rmw(0x64010, 0xfffff800, dpdiv);
- gtt_rmw(0x64810, 0xfffff800, dpdiv);
-}
-
static void igd_init(struct device *dev)
{
- int is_broadwell = !!(cpu_family_model() == BROADWELL_FAMILY_ULT);
- u32 rp1_gfx_freq;
-
/* IGD needs to be Bus Master */
u32 reg32 = pci_read_config32(dev, PCI_COMMAND);
reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
@@ -491,58 +82,19 @@ static void igd_init(struct device *dev)
/* Wait for any configured pre-graphics delay */
if (acpi_slp_type != SLEEP_STATE_S3) {
#if IS_ENABLED(CONFIG_CHROMEOS)
- if (developer_mode_enabled() || recovery_mode_enabled() ||
- vboot_wants_oprom())
- mdelay(CONFIG_PRE_GRAPHICS_DELAY);
-#else
+ if (developer_mode_enabled() || recovery_mode_enabled() ||
+ vboot_wants_oprom())
mdelay(CONFIG_PRE_GRAPHICS_DELAY);
+#else
+ mdelay(CONFIG_PRE_GRAPHICS_DELAY);
#endif
- }
-
- /* Early init steps */
- if (is_broadwell) {
- reg_script_run_on_dev(dev, broadwell_early_init_script);
- /* Set GFXPAUSE based on stepping */
- if (cpu_stepping() <= (CPUID_BROADWELL_E0 & 0xf) &&
- systemagent_revision() <= 9) {
- gtt_write(0xa000, 0x300ff);
- } else {
- gtt_write(0xa000, 0x30020);
- }
- } else {
- reg_script_run_on_dev(dev, haswell_early_init_script);
}
-
- /* Set RP1 graphics frequency */
- rp1_gfx_freq = (MCHBAR32(0x5998) >> 8) & 0xff;
- gtt_write(0xa008, rp1_gfx_freq << 24);
-
- /* Post VBIOS panel setup */
- igd_setup_panel(dev);
-
/* Initialize PCI device, load/execute BIOS Option ROM */
pci_dev_init(dev);
- /* Late init steps */
- if (is_broadwell) {
- igd_cdclk_init_broadwell(dev);
- reg_script_run_on_dev(dev, broadwell_late_init_script);
- } else {
- igd_cdclk_init_haswell(dev);
- reg_script_run_on_dev(dev, haswell_late_init_script);
- }
-
- if (gfx_get_init_done()) {
- /*
- * Work around VBIOS issue that is not clearing first 64
- * bytes of the framebuffer during VBE mode set.
- */
- struct resource *fb = find_resource(dev, PCI_BASE_ADDRESS_2);
- memset((void *)((u32)fb->base), 0, 64);
- }
-
- if (!gfx_get_init_done() && acpi_slp_type != 3) {
+#if IS_ENABLED(CONFIG_CHROMEOS)
+ if (!gfx_get_init_done() && !acpi_is_wakeup_s3()) {
/*
* Enable DDI-A if the Option ROM did not execute:
*
@@ -553,6 +105,7 @@ static void igd_init(struct device *dev)
gtt_write(DDI_BUF_CTL_A, DDI_BUF_IS_IDLE | DDI_A_4_LANES |
DDI_INIT_DISPLAY_DETECTED);
}
+#endif /* CONFIG_CHROMEOS */
}
static struct device_operations igd_ops = {
@@ -560,20 +113,13 @@ static struct device_operations igd_ops = {
.set_resources = &pci_dev_set_resources,
.enable_resources = &pci_dev_enable_resources,
.init = &igd_init,
- .ops_pci = &broadwell_pci_ops,
+ .ops_pci = &soc_pci_ops,
};
static const unsigned short pci_device_ids[] = {
- IGD_HASWELL_ULT_GT1,
- IGD_HASWELL_ULT_GT2,
- IGD_HASWELL_ULT_GT3,
- IGD_BROADWELL_U_GT1,
- IGD_BROADWELL_U_GT2,
- IGD_BROADWELL_U_GT3_15W,
- IGD_BROADWELL_U_GT3_28W,
- IGD_BROADWELL_Y_GT2,
- IGD_BROADWELL_H_GT2,
- IGD_BROADWELL_H_GT3,
+ IGD_SKYLAKE_GT1_SULTM,
+ IGD_SKYLAKE_GT2_SULXM,
+ IGD_SKYLAKE_GT2_SULTM,
0,
};
diff --git a/src/soc/intel/skylake/include/soc/acpi.h b/src/soc/intel/skylake/include/soc/acpi.h
index 2b1e77eea0..cd1a6639cc 100644
--- a/src/soc/intel/skylake/include/soc/acpi.h
+++ b/src/soc/intel/skylake/include/soc/acpi.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,11 +15,11 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_ACPI_H_
-#define _BROADWELL_ACPI_H_
+#ifndef _SOC_ACPI_H_
+#define _SOC_ACPI_H_
#include <arch/acpi.h>
#include <soc/nvs.h>
@@ -29,9 +30,13 @@
#define PSS_LATENCY_TRANSITION 10
#define PSS_LATENCY_BUSMASTER 10
-void acpi_create_intel_hpet(acpi_hpet_t *hpet);
+void acpi_create_serialio_ssdt(acpi_header_t *ssdt);
void acpi_fill_in_fadt(acpi_fadt_t *fadt);
unsigned long acpi_madt_irq_overrides(unsigned long current);
void acpi_init_gnvs(global_nvs_t *gnvs);
+void southcluster_inject_dsdt(device_t device);
+unsigned long southcluster_write_acpi_tables(device_t device,
+ unsigned long current, struct acpi_rsdp *rsdp);
+
+#endif /* _SOC_ACPI_H_ */
-#endif
diff --git a/src/soc/intel/skylake/include/soc/adsp.h b/src/soc/intel/skylake/include/soc/adsp.h
deleted file mode 100644
index 747a123579..0000000000
--- a/src/soc/intel/skylake/include/soc/adsp.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef _BROADWELL_ADSP_H_
-#define _BROADWELL_ADSP_H_
-
-#define ADSP_PCI_IRQ 23
-#define ADSP_ACPI_IRQ 3
-#define ADSP_ACPI_IRQEN (1 << 3)
-
-#define ADSP_SHIM_BASE_LPT 0xe7000
-#define ADSP_SHIM_BASE_WPT 0xfb000
-#define ADSP_SHIM_LTRC 0xe0
-#define ADSP_SHIM_LTRC_VALUE 0x3003
-#define ADSP_SHIM_IMC 0x28
-#define ADSP_SHIM_IPCD 0x40
-
-#define ADSP_PCI_VDRTCTL0 0xa0
-#define ADSP_VDRTCTL0_D3PGD_LPT (1 << 1)
-#define ADSP_VDRTCTL0_D3PGD_WPT (1 << 0)
-#define ADSP_VDRTCTL0_D3SRAMPGD_LPT (1 << 2)
-#define ADSP_VDRTCTL0_D3SRAMPGD_WPT (1 << 1)
-#define ADSP_PCI_VDRTCTL1 0xa4
-#define ADSP_PCI_VDRTCTL2 0xa8
-#define ADSP_VDRTCTL2_VALUE 0x00000fff
-
-#define ADSP_IOBP_VDLDAT1 0xd7000624
-#define ADSP_VDLDAT1_VALUE 0x00040100
-#define ADSP_IOBP_VDLDAT2 0xd7000628
-#define ADSP_IOBP_ACPI_IRQ3 0xd9d8
-#define ADSP_IOBP_ACPI_IRQ3I 0xd8d9
-#define ADSP_IOBP_ACPI_IRQ4 0xdbda
-#define ADSP_IOBP_PMCTL 0xd70001e0
-#define ADSP_PMCTL_VALUE 0x3f
-#define ADSP_IOBP_PCICFGCTL 0xd7000500
-#define ADSP_PCICFGCTL_PCICD (1 << 0)
-#define ADSP_PCICFGCTL_ACPIIE (1 << 1)
-#define ADSP_PCICFGCTL_SPCBAD (1 << 7)
-
-#endif
diff --git a/src/soc/intel/skylake/include/soc/chipset_fsp_util.h b/src/soc/intel/skylake/include/soc/chipset_fsp_util.h
new file mode 100644
index 0000000000..2c05f01b79
--- /dev/null
+++ b/src/soc/intel/skylake/include/soc/chipset_fsp_util.h
@@ -0,0 +1,41 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#ifndef _CHIPSET_FSP_UTIL_H_
+#define _CHIPSET_FSP_UTIL_H_
+
+/*
+ * Include the FSP binary interface files
+ *
+ * These files include the necessary UEFI constants and data structures
+ * that are used to interface to the FSP binary.
+ */
+
+#include <uefi_types.h> /* UEFI data types */
+#include <IntelFspPkg/Include/FspApi.h> /* FSP API definitions */
+#include <IntelFspPkg/Include/FspInfoHeader.h> /* FSP binary layout */
+#include <MdePkg/Include/Pi/PiBootMode.h> /* UEFI boot mode definitions */
+#include <MdePkg/Include/Pi/PiFirmwareFile.h> /* UEFI file definitions */
+#include <MdePkg/Include/Pi/PiFirmwareVolume.h> /* UEFI file system defs */
+#include <MdePkg/Include/Uefi/UefiMultiPhase.h> /* UEFI memory types */
+#include <MdePkg/Include/Pi/PiHob.h> /* Hand off block definitions */
+#include <MdePkg/Include/Library/HobLib.h> /* HOB routine declarations */
+#include <FspUpdVpd.h> /* Vital/updatable product data definitions */
+
+#endif /* _CHIPSET_FSP_UTIL_H_ */
diff --git a/src/soc/intel/skylake/include/soc/cpu.h b/src/soc/intel/skylake/include/soc/cpu.h
index 312532d68a..c62b3080c9 100644
--- a/src/soc/intel/skylake/include/soc/cpu.h
+++ b/src/soc/intel/skylake/include/soc/cpu.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,29 +15,21 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_CPU_H_
-#define _BROADWELL_CPU_H_
+#ifndef _SOC_CPU_H_
+#define _SOC_CPU_H_
#include <arch/cpu.h>
#include <device/device.h>
/* CPU types */
-#define HASWELL_FAMILY_ULT 0x40650
-#define BROADWELL_FAMILY_ULT 0x306d0
+#define SKYLAKE_FAMILY_ULT 0x406e0
/* Supported CPUIDs */
-#define CPUID_HASWELL_A0 0x306c1
-#define CPUID_HASWELL_B0 0x306c2
-#define CPUID_HASWELL_C0 0x306c3
-#define CPUID_HASWELL_ULT_B0 0x40650
-#define CPUID_HASWELL_ULT 0x40651
-#define CPUID_HASWELL_HALO 0x40661
-#define CPUID_BROADWELL_C0 0x306d2
-#define CPUID_BROADWELL_D0 0x306d3
-#define CPUID_BROADWELL_E0 0x306d4
+#define CPUID_SKYLAKE_C0 0x406e2
+#define CPUID_SKYLAKE_D0 0x406e3
/* CPU bus clock is fixed at 100MHz */
#define CPU_BCLK 100
@@ -53,7 +46,7 @@
(((1 << ((base)*5)) * (limit)) / 1000)
#define C_STATE_LATENCY_FROM_LAT_REG(reg) \
C_STATE_LATENCY_MICRO_SECONDS(C_STATE_LATENCY_CONTROL_ ##reg## _LIMIT, \
- (IRTL_1024_NS >> 10))
+ (IRTL_1024_NS >> 10))
/* Configure power limits for turbo mode */
void set_power_limits(u8 power_limit_1_time);
diff --git a/src/soc/intel/skylake/include/soc/device_nvs.h b/src/soc/intel/skylake/include/soc/device_nvs.h
index 7dab40da6a..822c976a15 100644
--- a/src/soc/intel/skylake/include/soc/device_nvs.h
+++ b/src/soc/intel/skylake/include/soc/device_nvs.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,31 +15,33 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_DEVICE_NVS_H_
-#define _BROADWELL_DEVICE_NVS_H_
+#ifndef _SOC_DEVICE_NVS_H_
+#define _SOC_DEVICE_NVS_H_
#include <stdint.h>
/* Offset in Global NVS where this structure lives */
#define DEVICE_NVS_OFFSET 0x1000
-#define SIO_NVS_DMA 0
-#define SIO_NVS_I2C0 1
-#define SIO_NVS_I2C1 2
-#define SIO_NVS_SPI0 3
-#define SIO_NVS_SPI1 4
-#define SIO_NVS_UART0 5
-#define SIO_NVS_UART1 6
-#define SIO_NVS_SDIO 7
-#define SIO_NVS_ADSP 8
+#define SIO_NVS_I2C0 0
+#define SIO_NVS_I2C1 1
+#define SIO_NVS_I2C2 2
+#define SIO_NVS_I2C3 3
+#define SIO_NVS_I2C4 4
+#define SIO_NVS_I2C5 5
+#define SIO_NVS_SPI0 6
+#define SIO_NVS_SPI1 7
+#define SIO_NVS_UART0 8
+#define SIO_NVS_UART1 9
+#define SIO_NVS_UART2 10
typedef struct {
- u8 enable[9];
- u32 bar0[9];
- u32 bar1[9];
+ u8 enable[11];
+ u32 bar0[11];
+ u32 bar1[11];
} __attribute__((packed)) device_nvs_t;
#endif
diff --git a/src/soc/intel/skylake/include/soc/ehci.h b/src/soc/intel/skylake/include/soc/ehci.h
deleted file mode 100644
index 44d51ef311..0000000000
--- a/src/soc/intel/skylake/include/soc/ehci.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef _BROADWELL_EHCI_H_
-#define _BROADWELL_EHCI_H_
-
-/* EHCI Memory Registers */
-#define EHCI_USB_CMD 0x20
-#define EHCI_USB_CMD_RUN (1 << 0)
-#define EHCI_USB_CMD_PSE (1 << 4)
-#define EHCI_USB_CMD_ASE (1 << 5)
-#define EHCI_PORTSC(port) (0x64 + (port * 4))
-#define EHCI_PORTSC_ENABLED (1 << 2)
-#define EHCI_PORTSC_SUSPEND (1 << 7)
-
-#endif
diff --git a/src/soc/intel/skylake/include/soc/gpio.h b/src/soc/intel/skylake/include/soc/gpio.h
index a0359755d2..efc666f4cd 100644
--- a/src/soc/intel/skylake/include/soc/gpio.h
+++ b/src/soc/intel/skylake/include/soc/gpio.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,11 +15,11 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_GPIO_H_
-#define _BROADWELL_GPIO_H_
+#ifndef _SOC_GPIO_H_
+#define _SOC_GPIO_H_
#include <stdint.h>
@@ -39,11 +40,115 @@
#define GPIO_CONFIG0(gpio) (0x100 + ((gpio) * 8))
#define GPIO_CONFIG1(gpio) (0x104 + ((gpio) * 8))
-#define MAX_GPIO_NUMBER 94 /* zero based */
+/*
+ * GPP_Ax to GPP_Gx;
+ * where x=24 [between GPIO Community A to F]
+ * = 7 [only for GPIO Community G]
+ */
+#define MAX_GPIO_NUMBER 151 /* zero based */
#define GPIO_LIST_END 0xffffffff
-/* conf0 */
+/*
+ * Skylake LP GPIO PIN to Pad Mapping
+ */
+#define GPIO_LP_GROUP_A 0x0
+#define GPIO_LP_GROUP_B 0x1
+#define GPIO_LP_GROUP_C 0x2
+#define GPIO_LP_GROUP_D 0x3
+#define GPIO_LP_GROUP_E 0x4
+#define GPIO_LP_GROUP_F 0x5
+#define GPIO_LP_GROUP_G 0x6
+
+#define GPIO_LP_GROUP_GPP_A 0x0200
+#define GPIO_LP_GROUP_GPP_B 0x0201
+#define GPIO_LP_GROUP_GPP_C 0x0202
+#define GPIO_LP_GROUP_GPP_D 0x0203
+#define GPIO_LP_GROUP_GPP_E 0x0204
+#define GPIO_LP_GROUP_GPP_F 0x0205
+#define GPIO_LP_GROUP_GPP_G 0x0206
+
+#define GPIO_GROUP_SHIFT 16
+#define MAX_GPIO_PIN_PER_GROUP 24
+
+/* GPIO TX STATE */
+#define B_PCH_GPIO_TX_STATE 0x0001
+#define N_PCH_GPIO_TX_STATE 0
+
+/* Interrupt number */
+#define B_PCH_GPIO_INTSEL 0x7F
+#define N_PCH_GPIO_INTSEL 0
+
+/* Structure for storing information about registers offset, community,
+ * maximal pad number, smi status and smi enable for available groups
+ */
+typedef struct {
+ u32 community;
+ u32 padcfgoffset;
+ u32 padpergroup;
+ u32 smistsoffset;
+ u32 smienoffset;
+} GPIO_GROUP_INFO;
+
+/*
+ * GPIO Community 0 Registers are for GPP_A and GPP_B groups
+ */
+#define R_PCH_PCR_GPIO_GPP_A_PADCFG_OFFSET 0x400
+#define R_PCH_PCR_GPIO_GPP_B_PADCFG_OFFSET 0x4C0
+#define R_PCH_PCR_GPIO_GPP_A_SMI_STS 0x0180
+#define R_PCH_PCR_GPIO_GPP_B_SMI_STS 0x0184
+#define R_PCH_PCR_GPIO_GPP_A_SMI_EN 0x01A0
+#define R_PCH_PCR_GPIO_GPP_B_SMI_EN 0x01A4
+
+/*
+ * GPIO Community 1 Registers are for GPP_C, GPP_D, GPP_E groups
+ */
+#define R_PCH_PCR_GPIO_GPP_C_PADCFG_OFFSET 0x400
+#define R_PCH_PCR_GPIO_GPP_D_PADCFG_OFFSET 0x4C0
+#define R_PCH_PCR_GPIO_GPP_E_PADCFG_OFFSET 0x580
+#define R_PCH_PCR_GPIO_GPP_C_SMI_STS 0x0180
+#define R_PCH_PCR_GPIO_GPP_D_SMI_STS 0x0184
+#define R_PCH_PCR_GPIO_GPP_E_SMI_STS 0x0188
+#define R_PCH_PCR_GPIO_GPP_C_SMI_EN 0x01A0
+#define R_PCH_PCR_GPIO_GPP_D_SMI_EN 0x01A4
+#define R_PCH_PCR_GPIO_GPP_E_SMI_EN 0x01A8
+
+/*
+ * GPIO Community 3 Registers are for GPP_F and GPP_G groups
+ */
+#define R_PCH_PCR_GPIO_GPP_F_PADCFG_OFFSET 0x400
+#define R_PCH_PCR_GPIO_GPP_G_PADCFG_OFFSET 0x4C0
+/*
+ * GPIO Community 2 Registers are for GPP_DSW
+ */
+#define R_PCH_PCR_GPIO_GPD_PADCFG_OFFSET 0x400
+
+#define READ 0
+#define WRITE 1
+
+/* If in GPIO_GROUP_INFO structure certain register doesn't exist
+ * it will have value equal to NO_REGISTER_PROPERTY
+ */
+#define NO_REGISTER_PROPERTY (~0u)
+
+#define V_PCH_GPIO_GPP_A_PAD_MAX 24
+#define V_PCH_GPIO_GPP_B_PAD_MAX 24
+#define V_PCH_GPIO_GPP_C_PAD_MAX 24
+#define V_PCH_GPIO_GPP_D_PAD_MAX 24
+#define V_PCH_GPIO_GPP_E_PAD_MAX 24
+#define V_PCH_GPIO_GPP_F_PAD_MAX 24
+#define V_PCH_GPIO_GPP_G_PAD_MAX 8
+#define V_PCH_GPIO_GPD_PAD_MAX 12
+
+/* SOC has 8 GPIO communities GPP A~G, GPD */
+#define GPIO_COMMUNITY_MAX 8
+
+#define GPIO_GET_GROUP_INDEX(group) (group & 0xFF)
+#define GPIO_GET_GROUP_INDEX_FROM_PAD(pad) (\
+ GPIO_GET_GROUP_INDEX((pad >> 16)))
+#define GPIO_GET_PAD_NUMBER(pad) (pad & 0xFFFF)
+
+/* conf0 */
#define GPIO_MODE_NATIVE (0 << 0)
#define GPIO_MODE_GPIO (1 << 0)
@@ -66,7 +171,6 @@
#define GPO_LEVEL_HIGH (GPIO_OUT_HIGH << GPO_LEVEL_SHIFT)
/* conf1 */
-
#define GPIO_PULL_NONE (0 << 0)
#define GPIO_PULL_DOWN (1 << 0)
#define GPIO_PULL_UP (2 << 0)
@@ -75,27 +179,22 @@
#define GPIO_SENSE_DISABLE (1 << 2)
/* owner */
-
#define GPIO_OWNER_ACPI 0
#define GPIO_OWNER_GPIO 1
/* route */
-
#define GPIO_ROUTE_SCI 0
#define GPIO_ROUTE_SMI 1
/* irqen */
-
#define GPIO_IRQ_DISABLE 0
#define GPIO_IRQ_ENABLE 1
/* blink */
-
#define GPO_NO_BLINK 0
#define GPO_BLINK 1
/* reset */
-
#define GPIO_RESET_PWROK 0
#define GPIO_RESET_RSMRST 1
@@ -170,23 +269,388 @@ struct gpio_config {
u8 pirq;
} __attribute__ ((packed));
-/* Configure GPIOs with mainboard provided settings */
-void init_one_gpio(int gpio_num, struct gpio_config *config);
-void init_gpios(const struct gpio_config config[]);
-/* Get GPIO pin value */
-int get_gpio(int gpio_num);
+/* For any GpioPad usage in code use GPIO_PAD type*/
+typedef u32 GPIO_PAD;
+
+/* For any GpioGroup usage in code use GPIO_GROUP type */
+typedef u32 GPIO_GROUP;
+
+/*
+ * GPIO configuration structure used for pin programming.
+ * Structure contains fields that can be used to configure pad.
+ */
+typedef struct {
+ /*
+ Pad Mode
+ Pad can be set as GPIO or one of its native functions.
+ When in native mode setting Direction, OutputState, Interrupt is unnecessary.
+ Refer to definition of GPIO_PAD_MODE.
+ Refer to EDS for each native mode according to the pad.
+ */
+ u32 PadMode : 4;
+ /*
+ Host Software Pad Ownership
+ Set pad to ACPI mode or GPIO Driver Mode.
+ Refer to definition of GPIO_HOSTSW_OWN.
+ */
+ u32 HostSoftPadOwn : 2;
+ /*
+ GPIO Direction
+ Can choose between In, In with inversion Out, both In and Out, both In with inversion and out or d
+ isabling both.
+ Refer to definition of GPIO_DIRECTION for supported settings.
+ */
+ u32 Direction : 5;
+ /*
+ Output State
+ Set Pad output value.
+ Refer to definition of GPIO_OUTPUT_STATE for supported settings.
+ This setting takes place when output is enabled.
+ */
+ u32 OutputState : 2;
+ /*
+ GPIO Interrupt Configuration
+ Set Pad to cause one of interrupts (IOxAPIC/SCI/SMI/NMI). This setting is applicable only if GPIO
+ A is in input mode.
+ If GPIO is set to cause an SCI then also Gpe is enabled for this pad.
+ Refer to definition of GPIO_INT_CONFIG for supported settings.
+ */
+ u32 InterruptConfig : 8;
+ /*
+ GPIO Power Configuration.
+ This setting controls Pad Reset Configuration and Power Rail Type.
+ Refer to definition of GPIO_RESET_CONFIG for supported settings.
+ */
+ u32 PowerConfig : 4;
+ /*
+ GPIO Electrical Configuration
+ This setting controls pads termination and voltage tolerance.
+ Refer to definition of GPIO_ELECTRICAL_CONFIG for supported settings.
+ */
+ u32 ElectricalConfig : 7;
+ /*
+ GPIO Lock Configuration
+ This setting controls pads lock.
+ Refer to definition of GPIO_LOCK_CONFIG for supported settings.
+ */
+ u32 LockConfig : 3;
+ /*
+ Additional GPIO configuration
+ Refer to definition of GPIO_OTHER_CONFIG for supported settings.
+ */
+ u32 OtherSettings : 2;
+ u32 RsvdBits : 27;
+} GPIO_CONFIG;
+
+typedef struct {
+ GPIO_PAD GpioPad;
+ GPIO_CONFIG GpioConfig;
+} GPIO_INIT_CONFIG;
+
+typedef enum {
+ GpioHardwareDefault = 0x0
+} GPIO_HARDWARE_DEFAULT;
+
+/* GPIO Pad Mode */
+typedef enum {
+ GpioPadModeGpio = 0x1,
+ GpioPadModeNative1 = 0x3,
+ GpioPadModeNative2 = 0x5,
+ GpioPadModeNative3 = 0x7,
+ GpioPadModeNative4 = 0x9,
+} GPIO_PAD_MODE;
+
+/* Host Software Pad Ownership modes */
+typedef enum {
+ GpioHostOwnDefault = 0x0, /* Leave ownership value unmodified */
+ GpioHostOwnAcpi = 0x1, /* Set HOST ownership to ACPI */
+ GpioHostOwnGpio = 0x3 /* Set HOST ownership to GPIO */
+} GPIO_HOSTSW_OWN;
+
+/* GPIO Direction */
+typedef enum {
+ GpioDirDefault = 0x0, /* Leave pad direction setting unmodified */
+ GpioDirInOut = (0x1 | (0x1 << 3)), /* Set pad for both output and input */
+ GpioDirInInvOut = (0x1 | (0x3 << 3)), /* Set pad for both output and input with inversion */
+ GpioDirIn = (0x3 | (0x1 << 3)), /* Set pad for input only */
+ GpioDirInInv = (0x3 | (0x3 << 3)), /* Set pad for input with inversion */
+ GpioDirOut = 0x5, /* Set pad for output only */
+ GpioDirNone = 0x7 /* Disable both output and input */
+} GPIO_DIRECTION;
+
+/* GPIO Output State */
+typedef enum {
+ GpioOutDefault = 0x0,
+ GpioOutLow = 0x1,
+ GpioOutHigh = 0x3
+} GPIO_OUTPUT_STATE;
+
+/*
+ * GPIO interrupt configuration
+ * This setting is applicable only if GPIO is in input mode.
+ * GPIO_INT_CONFIG allows to choose which interrupt is generted
+ * (IOxAPIC/SCI/SMI/NMI) and how it is triggered (edge or level).
+ * Field from GpioIntNmi to GpioIntApic can be OR'ed with GpioIntLevel to
+ * GpioIntBothEdgecan to describe an interrupt e.g. GpioIntApic | GpioIntLevel
+ * If GPIO is set to cause an SCI then also Gpe is enabled for this pad.
+ * Not all GPIO are capable of generating an SMI or NMI interrupt
+ */
+typedef enum {
+ GpioIntDefault = 0x0, /* Leave value of interrupt routing unmodified */
+ GpioIntDis = 0x1, /* Disable IOxAPIC/SCI/SMI/NMI interrupt generation */
+ GpioIntNmi = 0x3, /* Enable NMI interrupt only */
+ GpioIntSmi = 0x5, /* Enable SMI interrupt only */
+ GpioIntSci = 0x9, /* Enable SCI interrupt only */
+ GpioIntApic = 0x11, /* Enable IOxAPIC interrupt only */
+ GpioIntLevel = (0x1 << 5), /* Set interrupt as level triggered */
+ GpioIntEdge = (0x3 << 5), /* Set interrupt as edge triggered */
+ GpioIntLvlEdgDis = (0x5 << 5), /* Disable interrupt trigger */
+ GpioIntBothEdge = (0x7 << 5) /* Set interrupt as both edge triggered */
+} GPIO_INT_CONFIG;
+
+/*
+ * GPIO Power Configuration
+ * GPIO_RESET_CONFIG allows to set GPIO Reset (used to reset the specified
+ * Pad Register fields).
+ */
+typedef enum {
+ GpioResetDefault = 0x0, /* Leave value of pad reset unmodified */
+ GpioResetPwrGood = 0x1, /* Powergood reset */
+ GpioResetDeep = 0x3, /* Deep GPIO Reset */
+ GpioResetNormal = 0x5, /* GPIO Reset */
+ GpioResetResume = 0x7 /* Resume Reset */
+} GPIO_RESET_CONFIG;
+
+typedef int gpio_t;
+
+/* Clear GPIO SMI Status */
+void clear_all_smi(void);
-/* Set GPIO pin value */
-void set_gpio(int gpio_num, int value);
+/* Get GPIO SMI Status */
+void get_smi_status(u32 status[GPIO_COMMUNITY_MAX]);
-/* Return non-zero if gpio is set to native function. 0 otherwise. */
-int gpio_is_native(int gpio_num);
+/* Enable GPIO SMI */
+void enable_all_smi(void);
+
+/* Enable GPIO individual Group SMI */
+void enable_gpio_groupsmi(gpio_t gpio_num, u32 mask);
/*
- * Get a number comprised of multiple GPIO values. gpio_num_array points to
- * the array of gpio pin numbers to scan, terminated by -1.
+ * GPIO Electrical Configuration
+ * Set GPIO termination and Pad Tolerance (applicable only for some pads)
+ * Field from GpioTermDefault to GpioTermNative can be OR'ed with
+ * GpioTolerance1v8.
*/
-unsigned get_gpios(const int *gpio_num_array);
+typedef enum {
+ GpioTermDefault = 0x0, /* Leave termination setting unmodified */
+ GpioTermNone = 0x1, /* none */
+ GpioTermWpd5K = 0x5, /* 5kOhm weak pull-down */
+ GpioTermWpd20K = 0x9, /* 20kOhm weak pull-down */
+ GpioTermWpu1K = 0x13, /* 1kOhm weak pull-up */
+ GpioTermWpu2K = 0x17, /* 2kOhm weak pull-up */
+ GpioTermWpu5K = 0x15, /* 5kOhm weak pull-up */
+ GpioTermWpu20K = 0x19, /* 20kOhm weak pull-up */
+ GpioTermWpu1K2K = 0x1B, /* 1kOhm & 2kOhm weak pull-up */
+ GpioTermNative = 0x1F, /* Native function for pads termination */
+ GpioNoTolerance1v8 = (0x1 << 5), /* Disable 1.8V pad tolerance */
+ GpioTolerance1v8 = (0x3 << 5) /* Enable 1.8V pad tolerance */
+} GPIO_ELECTRICAL_CONFIG;
+/*
+ * GPIO LockConfiguration
+ * Set GPIO configuration lock and output state lock
+ * GpioLockPadConfig and GpioLockOutputState can be OR'ed
+ */
+typedef enum {
+ GpioLockDefault = 0x0, /* Leave lock setting unmodified */
+ GpioPadConfigLock = 0x3, /* Lock Pad Configuration */
+ GpioOutputStateLock = 0x5 /* Lock GPIO pad output value */
+} GPIO_LOCK_CONFIG;
+
+/*
+ * Other GPIO Configuration GPIO_OTHER_CONFIG is used for less often
+ * settings and for future extensions Supported settings:
+ * - RX raw override to '1' - allows to override input value to '1'
+ * This is applicable only if in input mode (both in GPIO and native usage)
+ * The override takes place at the internal pad state directly from buffer
+ * and before the RXINV.
+ */
+typedef enum {
+ GpioRxRaw1Default = 0x0, /* Use default input override value */
+ GpioRxRaw1Dis = 0x1, /* Don't override input */
+ GpioRxRaw1En = 0x3 /* Override input to '1' */
+} GPIO_OTHER_CONFIG;
+
+/*
+ * LP GPIO pins: Use below for functions from PCH GPIO Lib which
+ * require GpioPad as argument. Encoding used here
+ * has all information required by library functions
+ */
+#define GPIO_LP_GPP_A0 0x02000000
+#define GPIO_LP_GPP_A1 0x02000001
+#define GPIO_LP_GPP_A2 0x02000002
+#define GPIO_LP_GPP_A3 0x02000003
+#define GPIO_LP_GPP_A4 0x02000004
+#define GPIO_LP_GPP_A5 0x02000005
+#define GPIO_LP_GPP_A6 0x02000006
+#define GPIO_LP_GPP_A7 0x02000007
+#define GPIO_LP_GPP_A8 0x02000008
+#define GPIO_LP_GPP_A9 0x02000009
+#define GPIO_LP_GPP_A10 0x0200000A
+#define GPIO_LP_GPP_A11 0x0200000B
+#define GPIO_LP_GPP_A12 0x0200000C
+#define GPIO_LP_GPP_A13 0x0200000D
+#define GPIO_LP_GPP_A14 0x0200000E
+#define GPIO_LP_GPP_A15 0x0200000F
+#define GPIO_LP_GPP_A16 0x02000010
+#define GPIO_LP_GPP_A17 0x02000011
+#define GPIO_LP_GPP_A18 0x02000012
+#define GPIO_LP_GPP_A19 0x02000013
+#define GPIO_LP_GPP_A20 0x02000014
+#define GPIO_LP_GPP_A21 0x02000015
+#define GPIO_LP_GPP_A22 0x02000016
+#define GPIO_LP_GPP_A23 0x02000017
+#define GPIO_LP_GPP_B0 0x02010000
+#define GPIO_LP_GPP_B1 0x02010001
+#define GPIO_LP_GPP_B2 0x02010002
+#define GPIO_LP_GPP_B3 0x02010003
+#define GPIO_LP_GPP_B4 0x02010004
+#define GPIO_LP_GPP_B5 0x02010005
+#define GPIO_LP_GPP_B6 0x02010006
+#define GPIO_LP_GPP_B7 0x02010007
+#define GPIO_LP_GPP_B8 0x02010008
+#define GPIO_LP_GPP_B9 0x02010009
+#define GPIO_LP_GPP_B10 0x0201000A
+#define GPIO_LP_GPP_B11 0x0201000B
+#define GPIO_LP_GPP_B12 0x0201000C
+#define GPIO_LP_GPP_B13 0x0201000D
+#define GPIO_LP_GPP_B14 0x0201000E
+#define GPIO_LP_GPP_B15 0x0201000F
+#define GPIO_LP_GPP_B16 0x02010010
+#define GPIO_LP_GPP_B17 0x02010011
+#define GPIO_LP_GPP_B18 0x02010012
+#define GPIO_LP_GPP_B19 0x02010013
+#define GPIO_LP_GPP_B20 0x02010014
+#define GPIO_LP_GPP_B21 0x02010015
+#define GPIO_LP_GPP_B22 0x02010016
+#define GPIO_LP_GPP_B23 0x02010017
+#define GPIO_LP_GPP_C0 0x02020000
+#define GPIO_LP_GPP_C1 0x02020001
+#define GPIO_LP_GPP_C2 0x02020002
+#define GPIO_LP_GPP_C3 0x02020003
+#define GPIO_LP_GPP_C4 0x02020004
+#define GPIO_LP_GPP_C5 0x02020005
+#define GPIO_LP_GPP_C6 0x02020006
+#define GPIO_LP_GPP_C7 0x02020007
+#define GPIO_LP_GPP_C8 0x02020008
+#define GPIO_LP_GPP_C9 0x02020009
+#define GPIO_LP_GPP_C10 0x0202000A
+#define GPIO_LP_GPP_C11 0x0202000B
+#define GPIO_LP_GPP_C12 0x0202000C
+#define GPIO_LP_GPP_C13 0x0202000D
+#define GPIO_LP_GPP_C14 0x0202000E
+#define GPIO_LP_GPP_C15 0x0202000F
+#define GPIO_LP_GPP_C16 0x02020010
+#define GPIO_LP_GPP_C17 0x02020011
+#define GPIO_LP_GPP_C18 0x02020012
+#define GPIO_LP_GPP_C19 0x02020013
+#define GPIO_LP_GPP_C20 0x02020014
+#define GPIO_LP_GPP_C21 0x02020015
+#define GPIO_LP_GPP_C22 0x02020016
+#define GPIO_LP_GPP_C23 0x02020017
+#define GPIO_LP_GPP_D0 0x02030000
+#define GPIO_LP_GPP_D1 0x02030001
+#define GPIO_LP_GPP_D2 0x02030002
+#define GPIO_LP_GPP_D3 0x02030003
+#define GPIO_LP_GPP_D4 0x02030004
+#define GPIO_LP_GPP_D5 0x02030005
+#define GPIO_LP_GPP_D6 0x02030006
+#define GPIO_LP_GPP_D7 0x02030007
+#define GPIO_LP_GPP_D8 0x02030008
+#define GPIO_LP_GPP_D9 0x02030009
+#define GPIO_LP_GPP_D10 0x0203000A
+#define GPIO_LP_GPP_D11 0x0203000B
+#define GPIO_LP_GPP_D12 0x0203000C
+#define GPIO_LP_GPP_D13 0x0203000D
+#define GPIO_LP_GPP_D14 0x0203000E
+#define GPIO_LP_GPP_D15 0x0203000F
+#define GPIO_LP_GPP_D16 0x02030010
+#define GPIO_LP_GPP_D17 0x02030011
+#define GPIO_LP_GPP_D18 0x02030012
+#define GPIO_LP_GPP_D19 0x02030013
+#define GPIO_LP_GPP_D20 0x02030014
+#define GPIO_LP_GPP_D21 0x02030015
+#define GPIO_LP_GPP_D22 0x02030016
+#define GPIO_LP_GPP_D23 0x02030017
+#define GPIO_LP_GPP_E0 0x02040000
+#define GPIO_LP_GPP_E1 0x02040001
+#define GPIO_LP_GPP_E2 0x02040002
+#define GPIO_LP_GPP_E3 0x02040003
+#define GPIO_LP_GPP_E4 0x02040004
+#define GPIO_LP_GPP_E5 0x02040005
+#define GPIO_LP_GPP_E6 0x02040006
+#define GPIO_LP_GPP_E7 0x02040007
+#define GPIO_LP_GPP_E8 0x02040008
+#define GPIO_LP_GPP_E9 0x02040009
+#define GPIO_LP_GPP_E10 0x0204000A
+#define GPIO_LP_GPP_E11 0x0204000B
+#define GPIO_LP_GPP_E12 0x0204000C
+#define GPIO_LP_GPP_E13 0x0204000D
+#define GPIO_LP_GPP_E14 0x0204000E
+#define GPIO_LP_GPP_E15 0x0204000F
+#define GPIO_LP_GPP_E16 0x02040010
+#define GPIO_LP_GPP_E17 0x02040011
+#define GPIO_LP_GPP_E18 0x02040012
+#define GPIO_LP_GPP_E19 0x02040013
+#define GPIO_LP_GPP_E20 0x02040014
+#define GPIO_LP_GPP_E21 0x02040015
+#define GPIO_LP_GPP_E22 0x02040016
+#define GPIO_LP_GPP_E23 0x02040017
+#define GPIO_LP_GPP_F0 0x02050000
+#define GPIO_LP_GPP_F1 0x02050001
+#define GPIO_LP_GPP_F2 0x02050002
+#define GPIO_LP_GPP_F3 0x02050003
+#define GPIO_LP_GPP_F4 0x02050004
+#define GPIO_LP_GPP_F5 0x02050005
+#define GPIO_LP_GPP_F6 0x02050006
+#define GPIO_LP_GPP_F7 0x02050007
+#define GPIO_LP_GPP_F8 0x02050008
+#define GPIO_LP_GPP_F9 0x02050009
+#define GPIO_LP_GPP_F10 0x0205000A
+#define GPIO_LP_GPP_F11 0x0205000B
+#define GPIO_LP_GPP_F12 0x0205000C
+#define GPIO_LP_GPP_F13 0x0205000D
+#define GPIO_LP_GPP_F14 0x0205000E
+#define GPIO_LP_GPP_F15 0x0205000F
+#define GPIO_LP_GPP_F16 0x02050010
+#define GPIO_LP_GPP_F17 0x02050011
+#define GPIO_LP_GPP_F18 0x02050012
+#define GPIO_LP_GPP_F19 0x02050013
+#define GPIO_LP_GPP_F20 0x02050014
+#define GPIO_LP_GPP_F21 0x02050015
+#define GPIO_LP_GPP_F22 0x02050016
+#define GPIO_LP_GPP_F23 0x02050017
+#define GPIO_LP_GPP_G0 0x02060000
+#define GPIO_LP_GPP_G1 0x02060001
+#define GPIO_LP_GPP_G2 0x02060002
+#define GPIO_LP_GPP_G3 0x02060003
+#define GPIO_LP_GPP_G4 0x02060004
+#define GPIO_LP_GPP_G5 0x02060005
+#define GPIO_LP_GPP_G6 0x02060006
+#define GPIO_LP_GPP_G7 0x02060007
+#define GPIO_LP_GPD0 0x02070000
+#define GPIO_LP_GPD1 0x02070001
+#define GPIO_LP_GPD2 0x02070002
+#define GPIO_LP_GPD3 0x02070003
+#define GPIO_LP_GPD4 0x02070004
+#define GPIO_LP_GPD5 0x02070005
+#define GPIO_LP_GPD6 0x02070006
+#define GPIO_LP_GPD7 0x02070007
+#define GPIO_LP_GPD8 0x02070008
+#define GPIO_LP_GPD9 0x02070009
+#define GPIO_LP_GPD10 0x0207000A
+#define GPIO_LP_GPD11 0x0207000B
+
+#define END_OF_GPIO_TABLE 0xFFFFFFFF
#endif
diff --git a/src/soc/intel/skylake/include/soc/iobp.h b/src/soc/intel/skylake/include/soc/iobp.h
deleted file mode 100644
index 9f17692508..0000000000
--- a/src/soc/intel/skylake/include/soc/iobp.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef _BROADWELL_IOBP_H_
-#define _BROADWELL_IOBP_H_
-
-u32 pch_iobp_read(u32 address);
-void pch_iobp_write(u32 address, u32 data);
-void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue);
-void pch_iobp_exec(u32 addr, u16 op_dcode, u8 route_id, u32 *data, u8 *resp);
-
-#endif
diff --git a/src/soc/intel/skylake/include/soc/iomap.h b/src/soc/intel/skylake/include/soc/iomap.h
index bb98975d85..05c5419f49 100644
--- a/src/soc/intel/skylake/include/soc/iomap.h
+++ b/src/soc/intel/skylake/include/soc/iomap.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,11 +15,11 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_IOMAP_H_
-#define _BROADWELL_IOMAP_H_
+#ifndef _SOC_IOMAP_H_
+#define _SOC_IOMAP_H_
#define MCFG_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS
#define MCFG_BASE_SIZE 0x4000000
@@ -38,12 +39,16 @@
#define GDXC_BASE_ADDRESS 0xfed84000
#define GDXC_BASE_SIZE 0x1000
+/* TODO: need to remove RCBA code after ASL clean up */
#define RCBA_BASE_ADDRESS 0xfed1c000
#define RCBA_BASE_SIZE 0x4000
#define HPET_BASE_ADDRESS 0xfed00000
-#define ACPI_BASE_ADDRESS 0x1000
+#define PCH_PWRM_BASE_ADDRESS 0xfe000000
+#define PCH_PWRM_BASE_SIZE 0x10000
+
+#define ACPI_BASE_ADDRESS 0x1800
#define ACPI_BASE_SIZE 0x100
#define GPIO_BASE_ADDRESS 0x1400
@@ -55,7 +60,6 @@
/* Temporary addresses used in romstage */
#define EARLY_GTT_BAR 0xe0000000
#define EARLY_XHCI_BAR 0xd7000000
-#define EARLY_EHCI_BAR CONFIG_EHCI_BAR
#define EARLY_UART_BAR CONFIG_TTYS0_BASE
#define EARLY_TEMP_MMIO 0xfed08000
diff --git a/src/soc/intel/skylake/acpi/hda.asl b/src/soc/intel/skylake/include/soc/irq.h
index 21736615ac..7f3fd65617 100644
--- a/src/soc/intel/skylake/acpi/hda.asl
+++ b/src/soc/intel/skylake/include/soc/irq.h
@@ -1,8 +1,8 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -12,18 +12,22 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/* Intel PCH HDA */
+#ifndef _SOC_IRQ_H_
+#define _SOC_IRQ_H_
-// Intel High Definition Audio (Azalia) 0:1b.0
+#define LPSS_I2C0_IRQ 16
+#define LPSS_I2C1_IRQ 17
+#define LPSS_I2C2_IRQ 18
+#define LPSS_I2C3_IRQ 19
+#define LPSS_I2C4_IRQ 34
+#define LPSS_I2C5_IRQ 33
+#define LPSS_SPI0_IRQ 22
+#define LPSS_SPI1_IRQ 23
+#define LPSS_UART0_IRQ 20
+#define LPSS_UART1_IRQ 21
+#define LPSS_UART2_IRQ 32
+#define SDIO_IRQ 22
-Device (HDEF)
-{
- Name (_ADR, 0x001b0000)
- Name (_PRW, Package () { 0x6d, 3 })
-}
+#endif /* _SOC_IRQ_H_ */
diff --git a/src/soc/intel/skylake/include/soc/lpc.h b/src/soc/intel/skylake/include/soc/lpc.h
index 180e527c9e..4e826d7688 100644
--- a/src/soc/intel/skylake/include/soc/lpc.h
+++ b/src/soc/intel/skylake/include/soc/lpc.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,16 +15,15 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_LPC_H_
-#define _BROADWELL_LPC_H_
+#ifndef _SOC_LPC_H_
+#define _SOC_LPC_H_
/* PCI Configuration Space (D31:F0): LPC */
-#define SERIRQ_CNTL 0x64
-#define PMBASE 0x40
-#define ACPI_CNTL 0x44
+#define ABASE 0x40
+#define ACNTL 0x44
#define ACPI_EN (1 << 7)
#define SCI_IRQ_SEL (7 << 0)
#define SCIS_IRQ9 0
@@ -33,23 +33,10 @@
#define SCIS_IRQ21 5
#define SCIS_IRQ22 6
#define SCIS_IRQ23 7
-#define GPIOBASE 0x48
-#define BIOS_CNTL 0xdc
-#define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */
-#define GPIO_CNTL 0x4C /* LPC GPIO Control Register */
-#define GPIO_EN (1 << 4)
-#define GPIO_ROUT 0xb8
-
-#define PIRQA_ROUT 0x60
-#define PIRQB_ROUT 0x61
-#define PIRQC_ROUT 0x62
-#define PIRQD_ROUT 0x63
-#define PIRQE_ROUT 0x68
-#define PIRQF_ROUT 0x69
-#define PIRQG_ROUT 0x6A
-#define PIRQH_ROUT 0x6B
-
+#define SERIRQ_CNTL 0x64
#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */
+#define COMA_RANGE 0x0 /* 0x3F8 - 0x3FF COM1*/
+#define COMB_RANGE 0x1 /* 0x2F8 - 0x2FF COM2*/
#define LPC_EN 0x82 /* LPC IF Enables Register */
#define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */
#define CNF1_LPC_EN (1 << 12) /* 0x2e/0x2f */
@@ -66,28 +53,5 @@
#define LPC_GEN3_DEC 0x8c /* LPC IF Generic Decode Range 3 */
#define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */
#define LGMR 0x98 /* LPC Generic Memory Range */
-#define RCBA 0xf0 /* Root Complex Register Block */
-
-/* Power Management */
-
-#define GEN_PMCON_1 0xa0
-#define SMI_LOCK (1 << 4)
-#define GEN_PMCON_2 0xa2
-#define SYSTEM_RESET_STS (1 << 4)
-#define THERMTRIP_STS (1 << 3)
-#define SYSPWR_FLR (1 << 1)
-#define PWROK_FLR (1 << 0)
-#define GEN_PMCON_3 0xa4
-#define SUS_PWR_FLR (1 << 14)
-#define GEN_RST_STS (1 << 9)
-#define RTC_BATTERY_DEAD (1 << 2)
-#define PWR_FLR (1 << 1)
-#define SLEEP_AFTER_POWER_FAIL (1 << 0)
-#define GEN_PMCON_LOCK 0xa6
-#define SLP_STR_POL_LOCK (1 << 2)
-#define ACPI_BASE_LOCK (1 << 1)
-#define PMIR 0xac
-#define PMIR_CF9LOCK (1 << 31)
-#define PMIR_CF9GR (1 << 20)
-
+#define BIOS_CNTL 0xdc
#endif
diff --git a/src/soc/intel/skylake/include/soc/me.h b/src/soc/intel/skylake/include/soc/me.h
deleted file mode 100644
index 3973fc85bf..0000000000
--- a/src/soc/intel/skylake/include/soc/me.h
+++ /dev/null
@@ -1,507 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef _BROADWELL_ME_H_
-#define _BROADWELL_ME_H_
-
-#include <console/loglevel.h>
-
-#define ME_RETRY 100000 /* 1 second */
-#define ME_DELAY 10 /* 10 us */
-
-/*
- * Management Engine PCI registers
- */
-
-#define PCI_CPU_MEBASE_L 0x70 /* Set by MRC */
-#define PCI_CPU_MEBASE_H 0x74 /* Set by MRC */
-
-#define PCI_ME_HFS 0x40
-#define ME_HFS_CWS_RESET 0
-#define ME_HFS_CWS_INIT 1
-#define ME_HFS_CWS_REC 2
-#define ME_HFS_CWS_NORMAL 5
-#define ME_HFS_CWS_WAIT 6
-#define ME_HFS_CWS_TRANS 7
-#define ME_HFS_CWS_INVALID 8
-#define ME_HFS_STATE_PREBOOT 0
-#define ME_HFS_STATE_M0_UMA 1
-#define ME_HFS_STATE_M3 4
-#define ME_HFS_STATE_M0 5
-#define ME_HFS_STATE_BRINGUP 6
-#define ME_HFS_STATE_ERROR 7
-#define ME_HFS_ERROR_NONE 0
-#define ME_HFS_ERROR_UNCAT 1
-#define ME_HFS_ERROR_IMAGE 3
-#define ME_HFS_ERROR_DEBUG 4
-#define ME_HFS_MODE_NORMAL 0
-#define ME_HFS_MODE_DEBUG 2
-#define ME_HFS_MODE_DIS 3
-#define ME_HFS_MODE_OVER_JMPR 4
-#define ME_HFS_MODE_OVER_MEI 5
-#define ME_HFS_BIOS_DRAM_ACK 1
-#define ME_HFS_ACK_NO_DID 0
-#define ME_HFS_ACK_RESET 1
-#define ME_HFS_ACK_PWR_CYCLE 2
-#define ME_HFS_ACK_S3 3
-#define ME_HFS_ACK_S4 4
-#define ME_HFS_ACK_S5 5
-#define ME_HFS_ACK_GBL_RESET 6
-#define ME_HFS_ACK_CONTINUE 7
-
-struct me_hfs {
- u32 working_state: 4;
- u32 mfg_mode: 1;
- u32 fpt_bad: 1;
- u32 operation_state: 3;
- u32 fw_init_complete: 1;
- u32 ft_bup_ld_flr: 1;
- u32 update_in_progress: 1;
- u32 error_code: 4;
- u32 operation_mode: 4;
- u32 reserved: 4;
- u32 boot_options_present: 1;
- u32 ack_data: 3;
- u32 bios_msg_ack: 4;
-} __attribute__ ((packed));
-
-#define PCI_ME_UMA 0x44
-
-struct me_uma {
- u32 size: 6;
- u32 reserved_1: 10;
- u32 valid: 1;
- u32 reserved_0: 14;
- u32 set_to_one: 1;
-} __attribute__ ((packed));
-
-#define PCI_ME_H_GS 0x4c
-#define ME_INIT_DONE 1
-#define ME_INIT_STATUS_SUCCESS 0
-#define ME_INIT_STATUS_NOMEM 1
-#define ME_INIT_STATUS_ERROR 2
-#define ME_INIT_STATUS_SUCCESS_OTHER 3 /* SEE ME9 BWG */
-
-#define ME_HSIO_MESSAGE (7 << 28)
-#define ME_HSIO_CMD_GETHSIOVER 1
-#define ME_HSIO_CMD_CLOSE 0
-
-struct me_did {
- u32 uma_base: 16;
- u32 reserved: 7;
- u32 rapid_start: 1;
- u32 status: 4;
- u32 init_done: 4;
-} __attribute__ ((packed));
-
-/*
- * Apparently the GMES register is renamed to HFS2 (or HFSTS2 according
- * to ME9 BWG). Sadly the PCH EDS and the ME BWG do not match on nomenclature.
- */
-#define PCI_ME_HFS2 0x48
-/* Infrastructure Progress Values */
-#define ME_HFS2_PHASE_ROM 0
-#define ME_HFS2_PHASE_BUP 1
-#define ME_HFS2_PHASE_UKERNEL 2
-#define ME_HFS2_PHASE_POLICY 3
-#define ME_HFS2_PHASE_MODULE_LOAD 4
-#define ME_HFS2_PHASE_UNKNOWN 5
-#define ME_HFS2_PHASE_HOST_COMM 6
-/* Current State - Based on Infra Progress values. */
-/* ROM State */
-#define ME_HFS2_STATE_ROM_BEGIN 0
-#define ME_HFS2_STATE_ROM_DISABLE 6
-/* BUP State */
-#define ME_HFS2_STATE_BUP_INIT 0
-#define ME_HFS2_STATE_BUP_DIS_HOST_WAKE 1
-#define ME_HFS2_STATE_BUP_FLOW_DET 4
-#define ME_HFS2_STATE_BUP_VSCC_ERR 8
-#define ME_HFS2_STATE_BUP_CHECK_STRAP 0xa
-#define ME_HFS2_STATE_BUP_PWR_OK_TIMEOUT 0xb
-#define ME_HFS2_STATE_BUP_MANUF_OVRD_STRAP 0xd
-#define ME_HFS2_STATE_BUP_M3 0x11
-#define ME_HFS2_STATE_BUP_M0 0x12
-#define ME_HFS2_STATE_BUP_FLOW_DET_ERR 0x13
-#define ME_HFS2_STATE_BUP_M3_CLK_ERR 0x15
-#define ME_HFS2_STATE_BUP_CPU_RESET_DID_TIMEOUT_MEM_MISSING 0x17
-#define ME_HFS2_STATE_BUP_M3_KERN_LOAD 0x18
-#define ME_HFS2_STATE_BUP_T32_MISSING 0x1c
-#define ME_HFS2_STATE_BUP_WAIT_DID 0x1f
-#define ME_HFS2_STATE_BUP_WAIT_DID_FAIL 0x20
-#define ME_HFS2_STATE_BUP_DID_NO_FAIL 0x21
-#define ME_HFS2_STATE_BUP_ENABLE_UMA 0x22
-#define ME_HFS2_STATE_BUP_ENABLE_UMA_ERR 0x23
-#define ME_HFS2_STATE_BUP_SEND_DID_ACK 0x24
-#define ME_HFS2_STATE_BUP_SEND_DID_ACK_ERR 0x25
-#define ME_HFS2_STATE_BUP_M0_CLK 0x26
-#define ME_HFS2_STATE_BUP_M0_CLK_ERR 0x27
-#define ME_HFS2_STATE_BUP_TEMP_DIS 0x28
-#define ME_HFS2_STATE_BUP_M0_KERN_LOAD 0x32
-/* Policy Module State */
-#define ME_HFS2_STATE_POLICY_ENTRY 0
-#define ME_HFS2_STATE_POLICY_RCVD_S3 3
-#define ME_HFS2_STATE_POLICY_RCVD_S4 4
-#define ME_HFS2_STATE_POLICY_RCVD_S5 5
-#define ME_HFS2_STATE_POLICY_RCVD_UPD 6
-#define ME_HFS2_STATE_POLICY_RCVD_PCR 7
-#define ME_HFS2_STATE_POLICY_RCVD_NPCR 8
-#define ME_HFS2_STATE_POLICY_RCVD_HOST_WAKE 9
-#define ME_HFS2_STATE_POLICY_RCVD_AC_DC 0xa
-#define ME_HFS2_STATE_POLICY_RCVD_DID 0xb
-#define ME_HFS2_STATE_POLICY_VSCC_NOT_FOUND 0xc
-#define ME_HFS2_STATE_POLICY_VSCC_INVALID 0xd
-#define ME_HFS2_STATE_POLICY_FPB_ERR 0xe
-#define ME_HFS2_STATE_POLICY_DESCRIPTOR_ERR 0xf
-#define ME_HFS2_STATE_POLICY_VSCC_NO_MATCH 0x10
-/* Current PM Event Values */
-#define ME_HFS2_PMEVENT_CLEAN_MOFF_MX_WAKE 0
-#define ME_HFS2_PMEVENT_MOFF_MX_WAKE_ERROR 1
-#define ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET 2
-#define ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET_ERROR 3
-#define ME_HFS2_PMEVENT_CLEAN_ME_RESET 4
-#define ME_HFS2_PMEVENT_ME_RESET_EXCEPTION 5
-#define ME_HFS2_PMEVENT_PSEUDO_ME_RESET 6
-#define ME_HFS2_PMEVENT_S0MO_SXM3 7
-#define ME_HFS2_PMEVENT_SXM3_S0M0 8
-#define ME_HFS2_PMEVENT_NON_PWR_CYCLE_RESET 9
-#define ME_HFS2_PMEVENT_PWR_CYCLE_RESET_M3 0xa
-#define ME_HFS2_PMEVENT_PWR_CYCLE_RESET_MOFF 0xb
-#define ME_HFS2_PMEVENT_SXMX_SXMOFF 0xc
-
-struct me_hfs2 {
- u32 bist_in_progress: 1;
- u32 reserved1: 2;
- u32 invoke_mebx: 1;
- u32 cpu_replaced_sts: 1;
- u32 mbp_rdy: 1;
- u32 mfs_failure: 1;
- u32 warm_reset_request: 1;
- u32 cpu_replaced_valid: 1;
- u32 reserved2: 4;
- u32 mbp_cleared: 1;
- u32 reserved3: 2;
- u32 current_state: 8;
- u32 current_pmevent: 4;
- u32 progress_code: 4;
-} __attribute__ ((packed));
-
-#define PCI_ME_HFS5 0x68
-
-#define PCI_ME_H_GS2 0x70
-#define PCI_ME_MBP_GIVE_UP 0x01
-
-#define PCI_ME_HERES 0xbc
-#define PCI_ME_EXT_SHA1 0x00
-#define PCI_ME_EXT_SHA256 0x02
-#define PCI_ME_HER(x) (0xc0+(4*(x)))
-
-struct me_heres {
- u32 extend_reg_algorithm: 4;
- u32 reserved: 26;
- u32 extend_feature_present: 1;
- u32 extend_reg_valid: 1;
-} __attribute__ ((packed));
-
-/*
- * Management Engine MEI registers
- */
-
-#define MEI_H_CB_WW 0x00
-#define MEI_H_CSR 0x04
-#define MEI_ME_CB_RW 0x08
-#define MEI_ME_CSR_HA 0x0c
-
-struct mei_csr {
- u32 interrupt_enable: 1;
- u32 interrupt_status: 1;
- u32 interrupt_generate: 1;
- u32 ready: 1;
- u32 reset: 1;
- u32 reserved: 3;
- u32 buffer_read_ptr: 8;
- u32 buffer_write_ptr: 8;
- u32 buffer_depth: 8;
-} __attribute__ ((packed));
-
-#define MEI_ADDRESS_CORE 0x01
-#define MEI_ADDRESS_AMT 0x02
-#define MEI_ADDRESS_RESERVED 0x03
-#define MEI_ADDRESS_WDT 0x04
-#define MEI_ADDRESS_MKHI 0x07
-#define MEI_ADDRESS_ICC 0x08
-#define MEI_ADDRESS_THERMAL 0x09
-
-#define MEI_HOST_ADDRESS 0
-
-struct mei_header {
- u32 client_address: 8;
- u32 host_address: 8;
- u32 length: 9;
- u32 reserved: 6;
- u32 is_complete: 1;
-} __attribute__ ((packed));
-
-#define MKHI_GROUP_ID_CBM 0x00
-#define MKHI_GLOBAL_RESET 0x0b
-#define MKHI_GROUP_ID_FWCAPS 0x03
-#define MKHI_FWCAPS_GET_RULE 0x02
-#define MKHI_GROUP_ID_HMRFPO 0x05
-#define MKHI_HMRFPO_LOCK 0x02
-#define MKHI_HMRFPO_LOCK_NOACK 0x05
-#define MKHI_GROUP_ID_MDES 0x08
-#define MKHI_MDES_ENABLE 0x09
-#define MKHI_GROUP_ID_GEN 0xff
-#define MKHI_GET_FW_VERSION 0x02
-#define MKHI_END_OF_POST 0x0c
-#define MKHI_FEATURE_OVERRIDE 0x14
-#define MKHI_END_OF_POST_NOACK 0x1a
-
-struct mkhi_header {
- u32 group_id: 8;
- u32 command: 7;
- u32 is_response: 1;
- u32 reserved: 8;
- u32 result: 8;
-} __attribute__ ((packed));
-
-struct me_fw_version {
- u16 code_minor;
- u16 code_major;
- u16 code_build_number;
- u16 code_hot_fix;
- u16 recovery_minor;
- u16 recovery_major;
- u16 recovery_build_number;
- u16 recovery_hot_fix;
-} __attribute__ ((packed));
-
-/* ICC Messages */
-#define ICC_SET_CLOCK_ENABLES 0x3
-#define ICC_API_VERSION_LYNXPOINT 0x00030000
-
-struct icc_header {
- u32 api_version;
- u32 icc_command;
- u32 icc_status;
- u32 length;
- u32 reserved;
-} __attribute__ ((packed));
-
-struct icc_clock_enables_msg {
- u32 clock_enables;
- u32 clock_mask;
- u32 no_response: 1;
- u32 reserved: 31;
-} __attribute__ ((packed));
-
-#define HECI_EOP_STATUS_SUCCESS 0x0
-#define HECI_EOP_PERFORM_GLOBAL_RESET 0x1
-
-#define CBM_RR_GLOBAL_RESET 0x01
-
-#define GLOBAL_RESET_BIOS_MRC 0x01
-#define GLOBAL_RESET_BIOS_POST 0x02
-#define GLOBAL_RESET_MEBX 0x03
-
-struct me_global_reset {
- u8 request_origin;
- u8 reset_type;
-} __attribute__ ((packed));
-
-typedef enum {
- ME_NORMAL_BIOS_PATH,
- ME_S3WAKE_BIOS_PATH,
- ME_ERROR_BIOS_PATH,
- ME_RECOVERY_BIOS_PATH,
- ME_DISABLE_BIOS_PATH,
- ME_FIRMWARE_UPDATE_BIOS_PATH,
-} me_bios_path;
-
-/*
- * ME to BIOS Payload Datastructures and definitions. The ordering of the
- * structures follows the ordering in the ME9 BWG.
- */
-
-#define MBP_APPID_KERNEL 1
-#define MBP_APPID_INTEL_AT 3
-#define MBP_APPID_HWA 4
-#define MBP_APPID_ICC 5
-#define MBP_APPID_NFC 6
-/* Kernel items: */
-#define MBP_KERNEL_FW_VER_ITEM 1
-#define MBP_KERNEL_FW_CAP_ITEM 2
-#define MBP_KERNEL_ROM_BIST_ITEM 3
-#define MBP_KERNEL_PLAT_KEY_ITEM 4
-#define MBP_KERNEL_FW_TYPE_ITEM 5
-#define MBP_KERNEL_MFS_FAILURE_ITEM 6
-#define MBP_KERNEL_PLAT_TIME_ITEM 7
-/* Intel AT items: */
-#define MBP_INTEL_AT_STATE_ITEM 1
-/* ICC Items: */
-#define MBP_ICC_PROFILE_ITEM 1
-/* HWA Items: */
-#define MBP_HWA_REQUEST_ITEM 1
-/* NFC Items: */
-#define MBP_NFC_SUPPORT_DATA_ITEM 1
-
-#define MBP_MAKE_IDENT(appid, item) ((appid << 8) | item)
-#define MBP_IDENT(appid, item) \
- MBP_MAKE_IDENT(MBP_APPID_##appid, MBP_##appid##_##item##_ITEM)
-
-typedef struct {
- u32 mbp_size : 8;
- u32 num_entries : 8;
- u32 rsvd : 16;
-} __attribute__ ((packed)) mbp_header;
-
-typedef struct {
- u32 app_id : 8;
- u32 item_id : 8;
- u32 length : 8;
- u32 rsvd : 8;
-} __attribute__ ((packed)) mbp_item_header;
-
-typedef struct {
- u32 major_version : 16;
- u32 minor_version : 16;
- u32 hotfix_version : 16;
- u32 build_version : 16;
-} __attribute__ ((packed)) mbp_fw_version_name;
-
-typedef struct {
- u32 full_net : 1;
- u32 std_net : 1;
- u32 manageability : 1;
- u32 reserved_2 : 2;
- u32 intel_at : 1;
- u32 intel_cls : 1;
- u32 reserved : 3;
- u32 intel_mpc : 1;
- u32 icc_over_clocking : 1;
- u32 pavp : 1;
- u32 reserved_1 : 4;
- u32 ipv6 : 1;
- u32 kvm : 1;
- u32 och : 1;
- u32 vlan : 1;
- u32 tls : 1;
- u32 reserved_4 : 1;
- u32 wlan : 1;
- u32 reserved_5 : 8;
-} __attribute__ ((packed)) mbp_mefwcaps;
-
-typedef struct {
- u16 device_id;
- u16 fuse_test_flags;
- u32 umchid[4];
-} __attribute__ ((packed)) mbp_rom_bist_data;
-
-typedef struct {
- u32 key[8];
-} mbp_platform_key;
-
-typedef struct {
- u32 mobile: 1;
- u32 desktop: 1;
- u32 server: 1;
- u32 workstation: 1;
- u32 corporate: 1;
- u32 consumer: 1;
- u32 regular_super_sku: 1;
- u32 rsvd: 1;
- u32 image_type: 4;
- u32 brand: 4;
- u32 rsvd1: 16;
-} __attribute__ ((packed)) mbp_me_firmware_type;
-
-typedef struct {
- mbp_me_firmware_type rule_data;
- u8 available;
-} mbp_plat_type;
-
-typedef struct {
- u16 icc_start_address;
- u16 mask;
-} __attribute__ ((packed)) icc_address_mask;
-
-typedef struct {
- u8 num_icc_profiles;
- u8 icc_profile_soft_strap;
- u8 icc_profile_index;
- u8 reserved;
- u32 icc_reg_bundles;
- icc_address_mask icc_address_mask[0];
-} __attribute__ ((packed)) mbp_icc_profile;
-
-typedef struct {
- u16 lock_state : 1;
- u16 authenticate_module : 1;
- u16 s3authentication : 1;
- u16 flash_wear_out : 1;
- u16 flash_variable_security : 1;
- u16 reserved : 11;
-} __attribute__ ((packed)) tdt_state_flag;
-
-typedef struct {
- u8 state;
- u8 last_theft_trigger;
- tdt_state_flag flags;
-} __attribute__ ((packed)) mbp_at_state;
-
-typedef struct {
- u32 wake_event_mrst_time_ms;
- u32 mrst_pltrst_time_ms;
- u32 pltrst_cpurst_time_ms;
-} __attribute__ ((packed)) mbp_plat_time;
-
-typedef struct {
- u32 device_type : 2;
- u32 reserved : 30;
-} __attribute__ ((packed)) mbp_nfc_data;
-
-typedef struct {
- mbp_fw_version_name *fw_version_name;
- mbp_mefwcaps *fw_capabilities;
- mbp_rom_bist_data *rom_bist_data;
- mbp_platform_key *platform_key;
- mbp_plat_type *fw_plat_type;
- mbp_icc_profile *icc_profile;
- mbp_at_state *at_state;
- u32 *mfsintegrity;
- mbp_plat_time *plat_time;
- mbp_nfc_data *nfc_data;
-} me_bios_payload;
-
-struct me_fwcaps {
- u32 id;
- u8 length;
- mbp_mefwcaps caps_sku;
- u8 reserved[3];
-} __attribute__ ((packed));
-
-void intel_me_hsio_version(uint16_t *version, uint16_t *checksum);
-
-#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG)
-/* Defined in me_status.c for both romstage and ramstage */
-void intel_me_status(void);
-#else
-static inline void intel_me_status(void) { }
-#endif
-
-#endif
diff --git a/src/soc/intel/skylake/include/soc/msr.h b/src/soc/intel/skylake/include/soc/msr.h
index 707041a161..b857dbe85e 100644
--- a/src/soc/intel/skylake/include/soc/msr.h
+++ b/src/soc/intel/skylake/include/soc/msr.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,11 +15,11 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_MSR_H_
-#define _BROADWELL_MSR_H_
+#ifndef _SOC_MSR_H_
+#define _SOC_MSR_H_
#define MSR_PIC_MSG_CONTROL 0x2e
#define CORE_THREAD_COUNT_MSR 0x35
@@ -41,21 +42,21 @@
#define MISC_PWR_MGMT_EIST_HW_DIS (1 << 0)
#define MSR_TURBO_RATIO_LIMIT 0x1ad
#define MSR_TEMPERATURE_TARGET 0x1a2
-#define IA32_PERF_CTL 0x199
+#define IA32_PERF_CTL 0x199
#define IA32_THERM_INTERRUPT 0x19b
#define IA32_ENERGY_PERFORMANCE_BIAS 0x1b0
#define ENERGY_POLICY_PERFORMANCE 0
#define ENERGY_POLICY_NORMAL 6
#define ENERGY_POLICY_POWERSAVE 15
#define IA32_PACKAGE_THERM_INTERRUPT 0x1b2
-#define EMRRphysBase_MSR 0x1f4
-#define EMRRphysMask_MSR 0x1f5
+#define EMRR_PHYS_BASE_MSR 0x1f4
+#define EMRR_PHYS_MASK_MSR 0x1f5
#define IA32_PLATFORM_DCA_CAP 0x1f8
#define MSR_POWER_CTL 0x1fc
#define MSR_LT_LOCK_MEMORY 0x2e7
-#define UNCORE_EMRRphysBase_MSR 0x2f4
-#define UNCORE_EMRRphysMask_MSR 0x2f5
-#define IA32_MC0_STATUS 0x401
+#define UNCORE_EMRR_PHYS_BASE_MSR 0x2f4
+#define UNCORE_EMRR_PHYS_MASK_MSR 0x2f5
+#define IA32_MC0_STATUS 0x401
#define SMM_FEATURE_CONTROL_MSR 0x4e0
#define SMM_CPU_SAVE_EN (1 << 1)
diff --git a/src/soc/intel/skylake/include/soc/nvs.h b/src/soc/intel/skylake/include/soc/nvs.h
index 0f1e63a67a..2c83c5f019 100644
--- a/src/soc/intel/skylake/include/soc/nvs.h
+++ b/src/soc/intel/skylake/include/soc/nvs.h
@@ -3,6 +3,7 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,12 +16,13 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_NVS_H_
-#define _BROADWELL_NVS_H_
+#ifndef _SOC_NVS_H_
+#define _SOC_NVS_H_
+#include <rules.h>
#include <vendorcode/google/chromeos/gnvs.h>
#include <soc/device_nvs.h>
@@ -53,7 +55,9 @@ typedef struct {
u32 cbmc; /* 0x1c - 0x1f - Coreboot Memory Console */
u64 pm1i; /* 0x20 - 0x27 - PM1 wake status bit */
u64 gpei; /* 0x28 - 0x2f - GPE wake status bit */
- u8 unused[208];
+ u32 rpa[12]; /* 0x30 - 0x5f - Root Port Address */
+
+ u8 unused[160];
/* ChromeOS specific (0x100 - 0xfff) */
chromeos_acpi_t chromeos;
@@ -63,7 +67,7 @@ typedef struct {
} __attribute__((packed)) global_nvs_t;
void acpi_create_gnvs(global_nvs_t *gnvs);
-#ifdef __SMM__
+#if ENV_SMM
/* Used in SMM to find the ACPI GNVS address */
global_nvs_t *smm_get_gnvs(void);
#endif
diff --git a/src/soc/intel/skylake/include/soc/pch.h b/src/soc/intel/skylake/include/soc/pch.h
index e677215c7f..4b67e998db 100644
--- a/src/soc/intel/skylake/include/soc/pch.h
+++ b/src/soc/intel/skylake/include/soc/pch.h
@@ -3,6 +3,7 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,38 +16,27 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_PCH_H_
-#define _BROADWELL_PCH_H_
+#ifndef _SOC_PCH_H_
+#define _SOC_PCH_H_
-/* Haswell ULT Pch (LynxPoint-LP) */
-#define PCH_LPT_LP_SAMPLE 0x9c41
-#define PCH_LPT_LP_PREMIUM 0x9c43
-#define PCH_LPT_LP_MAINSTREAM 0x9c45
-#define PCH_LPT_LP_VALUE 0x9c47
+#include <device/device.h>
+#include <rules.h>
-/* Broadwell PCH (WildatPoint) */
-#define PCH_WPT_HSW_U_SAMPLE 0x9cc1
-#define PCH_WPT_BDW_U_SAMPLE 0x9cc2
-#define PCH_WPT_BDW_U_PREMIUM 0x9cc3
-#define PCH_WPT_BDW_U_BASE 0x9cc5
-#define PCH_WPT_BDW_Y_SAMPLE 0x9cc6
-#define PCH_WPT_BDW_Y_PREMIUM 0x9cc7
-#define PCH_WPT_BDW_Y_BASE 0x9cc9
-#define PCH_WPT_BDW_H 0x9ccb
-
-/* Power Management Control and Status */
-#define PCH_PCS 0x84
-#define PCH_PCS_PS_D3HOT 3
+/* PCH (SunRisePoint LP) */
+#define PCH_SPT_LP_SAMPLE 0x9d41
+#define PCH_SPT_LP_U_BASE 0x9d43
+#define PCH_SPT_LP_U_PREMIUM 0x9d48
+#define PCH_SPT_LP_Y_PREMIUM 0x9d46
u8 pch_revision(void);
u16 pch_type(void);
-int pch_is_wpt(void);
-int pch_is_wpt_ulx(void);
u32 pch_read_soft_strap(int id);
void pch_log_state(void);
+#if ENV_RAMSTAGE
void pch_disable_devfn(device_t dev);
-
#endif
+
+#endif /* _SOC_PCH_H_ */
diff --git a/src/soc/intel/skylake/include/soc/pci_devs.h b/src/soc/intel/skylake/include/soc/pci_devs.h
index 76e3a688ed..240bd4a4e1 100644
--- a/src/soc/intel/skylake/include/soc/pci_devs.h
+++ b/src/soc/intel/skylake/include/soc/pci_devs.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,24 +15,26 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_PCI_DEVS_H_
-#define _BROADWELL_PCI_DEVS_H_
+#ifndef _SOC_PCI_DEVS_H_
+#define _SOC_PCI_DEVS_H_
+
+#include <rules.h>
#define _SA_DEVFN(slot) PCI_DEVFN(SA_DEV_SLOT_ ## slot, 0)
-#define _PCH_DEVFN(slot,func) PCI_DEVFN(PCH_DEV_SLOT_ ## slot, func)
+#define _PCH_DEVFN(slot, func) PCI_DEVFN(PCH_DEV_SLOT_ ## slot, func)
-#if defined(__PRE_RAM__) || defined(__SMM__) || defined(__ROMCC__)
-#include <arch/io.h>
-#define _SA_DEV(slot) PCI_DEV(0, SA_DEV_SLOT_ ## slot, 0)
-#define _PCH_DEV(slot,func) PCI_DEV(0, PCH_DEV_SLOT_ ## slot, func)
-#else
+#if ENV_RAMSTAGE
#include <device/device.h>
#include <device/pci_def.h>
#define _SA_DEV(slot) dev_find_slot(0, _SA_DEVFN(slot))
-#define _PCH_DEV(slot,func) dev_find_slot(0, _PCH_DEVFN(slot, func))
+#define _PCH_DEV(slot, func) dev_find_slot(0, _PCH_DEVFN(slot, func))
+#else
+#include <arch/io.h>
+#define _SA_DEV(slot) PCI_DEV(0, SA_DEV_SLOT_ ## slot, 0)
+#define _PCH_DEV(slot, func) PCI_DEV(0, PCH_DEV_SLOT_ ## slot, func)
#endif
/* System Agent Devices */
@@ -44,76 +47,84 @@
#define SA_DEVFN_IGD _SA_DEVFN(IGD)
#define SA_DEV_IGD _SA_DEV(IGD)
-#define SA_DEV_SLOT_MINIHD 0x03
-#define SA_DEVFN_MINIHD _SA_DEVFN(MINIHD)
-#define SA_DEV_MINIHD _SA_DEV(MINIHD)
-
/* PCH Devices */
-
-#define PCH_DEV_SLOT_ADSP 0x13
-#define PCH_DEVFN_ADSP _PCH_DEVFN(ADSP, 0)
-#define PCH_DEV_ADSP _PCH_DEV(ADSP, 0)
-
#define PCH_DEV_SLOT_XHCI 0x14
#define PCH_DEVFN_XHCI _PCH_DEVFN(XHCI, 0)
+#define PCH_DEVFN_USBOTG _PCH_DEVFN(XHCI, 1)
+#define PCH_DEVFN_THERMAL _PCH_DEVFN(XHCI, 2)
#define PCH_DEV_XHCI _PCH_DEV(XHCI, 0)
-
-#define PCH_DEV_SLOT_SIO 0x15
-#define PCH_DEV_SDMA _PCH_DEV(SIO, 0)
-#define PCH_DEV_I2C0 _PCH_DEV(SIO, 1)
-#define PCH_DEV_I2C1 _PCH_DEV(SIO, 2)
-#define PCH_DEV_SPI0 _PCH_DEV(SIO, 3)
-#define PCH_DEV_SPI1 _PCH_DEV(SIO, 4)
-#define PCH_DEV_UART0 _PCH_DEV(SIO, 5)
-#define PCH_DEV_UART1 _PCH_DEV(SIO, 6)
-#define PCH_DEVFN_SDMA _PCH_DEVFN(SIO, 0)
-#define PCH_DEVFN_I2C0 _PCH_DEVFN(SIO, 1)
-#define PCH_DEVFN_I2C1 _PCH_DEVFN(SIO, 2)
-#define PCH_DEVFN_SPI0 _PCH_DEVFN(SIO, 3)
-#define PCH_DEVFN_SPI1 _PCH_DEVFN(SIO, 4)
-#define PCH_DEVFN_UART0 _PCH_DEVFN(SIO, 5)
-#define PCH_DEVFN_UART1 _PCH_DEVFN(SIO, 6)
+#define PCH_DEV_USBOTG _PCH_DEV(XHCI, 1)
+#define PCH_DEV_THERMAL _PCH_DEV(XHCI, 2)
+
+#define PCH_DEV_SLOT_SIO1 0x15
+#define PCH_DEVFN_I2C0 _PCH_DEVFN(SIO1, 0)
+#define PCH_DEVFN_I2C1 _PCH_DEVFN(SIO1, 1)
+#define PCH_DEVFN_I2C2 _PCH_DEVFN(SIO1, 2)
+#define PCH_DEVFN_I2C3 _PCH_DEVFN(SIO1, 3)
+#define PCH_DEV_I2C0 _PCH_DEV(SIO1, 0)
+#define PCH_DEV_I2C1 _PCH_DEV(SIO1, 1)
+#define PCH_DEV_I2C2 _PCH_DEV(SIO1, 2)
+#define PCH_DEV_I2C3 _PCH_DEV(SIO1, 3)
#define PCH_DEV_SLOT_ME 0x16
#define PCH_DEVFN_ME _PCH_DEVFN(ME, 0)
#define PCH_DEVFN_ME_2 _PCH_DEVFN(ME, 1)
#define PCH_DEVFN_ME_IDER _PCH_DEVFN(ME, 2)
#define PCH_DEVFN_ME_KT _PCH_DEVFN(ME, 3)
+#define PCH_DEVFN_ME_3 _PCH_DEVFN(ME, 4)
#define PCH_DEV_ME _PCH_DEV(ME, 0)
#define PCH_DEV_ME_2 _PCH_DEV(ME, 1)
#define PCH_DEV_ME_IDER _PCH_DEV(ME, 2)
#define PCH_DEV_ME_KT _PCH_DEV(ME, 3)
+#define PCH_DEV_ME_3 _PCH_DEV(ME, 4)
-#define PCH_DEV_SLOT_SDIO 0x17
-#define PCH_DEVFN_SDIO _PCH_DEVFN(SDIO, 0)
-#define PCH_DEV_SDIO _PCH_DEV(SDIO, 0)
+#define PCH_DEV_SLOT_SATA 0x17
+#define PCH_DEVFN_SATA _PCH_DEVFN(SATA, 0)
+#define PCH_DEV_SATA _PCH_DEV(SATA, 0)
-#define PCH_DEV_SLOT_GBE 0x19
-#define PCH_DEVFN_GBE _PCH_DEVFN(GBE, 0)
-#define PCH_DEV_GBE _PCH_DEV(GBE, 0)
-
-#define PCH_DEV_SLOT_HDA 0x1b
-#define PCH_DEVFN_HDA _PCH_DEVFN(HDA, 0)
-#define PCH_DEV_HDA _PCH_DEV(HDA, 0)
+#define PCH_DEV_SLOT_SIO2 0x19
+#define PCH_DEVFN_UART2 _PCH_DEVFN(SIO2, 0)
+#define PCH_DEVFN_I2C5 _PCH_DEVFN(SIO2, 1)
+#define PCH_DEVFN_I2C4 _PCH_DEVFN(SIO2, 2)
+#define PCH_DEV_UART2 _PCH_DEV(SIO2, 0)
+#define PCH_DEV_I2C5 _PCH_DEV(SIO2, 1)
+#define PCH_DEV_I2C4 _PCH_DEV(SIO2, 2)
#define PCH_DEV_SLOT_PCIE 0x1c
-
-#define PCH_DEV_SLOT_EHCI 0x1d
-#define PCH_DEVFN_EHCI _PCH_DEVFN(EHCI, 0)
-#define PCH_DEV_EHCI _PCH_DEV(EHCI, 0)
+#define PCH_DEVFN_PCIE1 _PCH_DEVFN(PCIE, 0)
+#define PCH_DEVFN_PCIE2 _PCH_DEVFN(PCIE, 1)
+#define PCH_DEVFN_PCIE3 _PCH_DEVFN(PCIE, 2)
+#define PCH_DEVFN_PCIE4 _PCH_DEVFN(PCIE, 3)
+#define PCH_DEVFN_PCIE5 _PCH_DEVFN(PCIE, 4)
+#define PCH_DEVFN_PCIE6 _PCH_DEVFN(PCIE, 5)
+#define PCH_DEV_PCIE1 _PCH_DEV(PCIE, 0)
+#define PCH_DEV_PCIE2 _PCH_DEV(PCIE, 1)
+#define PCH_DEV_PCIE3 _PCH_DEV(PCIE, 2)
+#define PCH_DEV_PCIE4 _PCH_DEV(PCIE, 3)
+#define PCH_DEV_PCIE5 _PCH_DEV(PCIE, 4)
+#define PCH_DEV_PCIE6 _PCH_DEV(PCIE, 5)
+
+#define PCH_DEV_SLOT_STORAGE 0x1e
+#define PCH_DEVFN_UART0 _PCH_DEVFN(STORAGE, 0)
+#define PCH_DEVFN_UART1 _PCH_DEVFN(STORAGE, 1)
+#define PCH_DEVFN_EMMC _PCH_DEVFN(STORAGE, 4)
+#define PCH_DEVFN_SDCARD _PCH_DEVFN(STORAGE, 6)
+#define PCH_DEV_UART0 _PCH_DEV(STORAGE, 0)
+#define PCH_DEV_UART1 _PCH_DEV(STORAGE, 1)
+#define PCH_DEV_EMMC _PCH_DEV(STORAGE, 4)
+#define PCH_DEV_SDCARD _PCH_DEV(STORAGE, 6)
#define PCH_DEV_SLOT_LPC 0x1f
#define PCH_DEVFN_LPC _PCH_DEVFN(LPC, 0)
-#define PCH_DEVFN_IDE _PCH_DEVFN(LPC, 1)
-#define PCH_DEVFN_SATA _PCH_DEVFN(LPC, 2)
-#define PCH_DEVFN_SMBUS _PCH_DEVFN(LPC, 3)
-#define PCH_DEVFN_SATA2 _PCH_DEVFN(LPC, 5)
-#define PCH_DEVFN_THERMAL _PCH_DEVFN(LPC, 6)
+#define PCH_DEVFN_PMC _PCH_DEVFN(LPC, 2)
+#define PCH_DEVFN_HDA _PCH_DEVFN(LPC, 3)
+#define PCH_DEVFN_SMBUS _PCH_DEVFN(LPC, 4)
+#define PCH_DEVFN_SPI _PCH_DEVFN(LPC, 5)
+#define PCH_DEVFN_GBE _PCH_DEVFN(LPC, 6)
#define PCH_DEV_LPC _PCH_DEV(LPC, 0)
-#define PCH_DEV_IDE _PCH_DEV(LPC, 1)
-#define PCH_DEV_SATA _PCH_DEV(LPC, 2)
-#define PCH_DEV_SMBUS _PCH_DEV(LPC, 3)
-#define PCH_DEV_SATA2 _PCH_DEV(LPC, 5)
-#define PCH_DEV_THERMAL _PCH_DEV(LPC, 6)
-
+#define PCH_DEV_PMC _PCH_DEV(LPC, 2)
+#define PCH_DEV_HDA _PCH_DEV(LPC, 3)
+#define PCH_DEV_SMBUS _PCH_DEV(LPC, 4)
+#define PCH_DEV_SPI _PCH_DEV(LPC, 5)
+#define PCH_DEV_GBE _PCH_DEV(LPC, 6)
#endif
diff --git a/src/soc/intel/skylake/include/soc/pcr.h b/src/soc/intel/skylake/include/soc/pcr.h
new file mode 100644
index 0000000000..9ac9eddd48
--- /dev/null
+++ b/src/soc/intel/skylake/include/soc/pcr.h
@@ -0,0 +1,104 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_PCR_H_
+#define _SOC_PCR_H_
+
+/* PCH (SunRisePoint LP) */
+#define PCH_PCR_BASE_ADDRESS 0xFD000000
+#define R_PCH_PCR_LPC_GCFD 0x3418
+
+/* DMI Control Register */
+#define R_PCH_PCR_DMI_DMIC 0x2234
+#define B_PCH_PCR_DMI_DMIC_SRL (1 << 31)
+#define R_PCH_PCR_DMI_LPCLGIR1 0x2730
+#define R_PCH_PCR_DMI_LPCLGIR2 0x2734
+#define R_PCH_PCR_DMI_LPCLGIR3 0x2738
+#define R_PCH_PCR_DMI_LPCLGIR4 0x273c
+#define R_PCH_PCR_DMI_LPCIOD 0x2770
+#define R_PCH_PCR_DMI_LPCIOE 0x2774
+
+/* RTC configuration */
+#define R_PCH_PCR_RTC_CONF 0x3400
+#define B_PCH_PCR_RTC_CONF_UCMOS_EN 0x4
+
+/* ITSS PCRs*/
+/* PIRQA Routing Control Register*/
+#define R_PCH_PCR_ITSS_PIRQA_ROUT 0x3100
+/* PIRQB Routing Control Register*/
+#define R_PCH_PCR_ITSS_PIRQB_ROUT 0x3101
+/* PIRQC Routing Control Register*/
+#define R_PCH_PCR_ITSS_PIRQC_ROUT 0x3102
+/* PIRQD Routing Control Register*/
+#define R_PCH_PCR_ITSS_PIRQD_ROUT 0x3103
+/* PIRQE Routing Control Register*/
+#define R_PCH_PCR_ITSS_PIRQE_ROUT 0x3104
+/* PIRQF Routing Control Register*/
+#define R_PCH_PCR_ITSS_PIRQF_ROUT 0x3105
+/* PIRQG Routing Control Register*/
+#define R_PCH_PCR_ITSS_PIRQG_ROUT 0x3106
+/* PIRQH Routing Control Register*/
+#define R_PCH_PCR_ITSS_PIRQH_ROUT 0x3107
+
+/* IO Trap PCRs */
+/* Trap status Register */
+#define R_PCH_PCR_PSTH_TRPST 0x1E00
+/* Trapped cycle */
+#define R_PCH_PCR_PSTH_TRPC 0x1E10
+/* Trapped write data */
+#define R_PCH_PCR_PSTH_TRPD 0x1E18
+
+/* Serial IO UART controller legacy mode */
+#define R_PCH_PCR_SERIAL_IO_GPPRVRW7 0x618
+#define SIO_PCH_LEGACY_UART0 (1 << 0)
+#define SIO_PCH_LEGACY_UART1 (1 << 1)
+#define SIO_PCH_LEGACY_UART2 (1 << 2)
+
+/*
+ * Definition for PCR address
+ * The PCR address is used to the PCR MMIO programming
+ */
+#define PCH_PCR_ADDRESS(pid, offset) (void *)(\
+ PCH_PCR_BASE_ADDRESS | ((u8)(pid) << 16) | (u16)(offset))
+
+/*
+ * Definition for SBI PID
+ * The PCH_SBI_PID defines the PID for PCR MMIO programming and
+ * PCH SBI programming as well.
+ */
+typedef enum {
+ PID_PSTH = 0x89,
+ PID_GPIOCOM3 = 0xAC,
+ PID_GPIOCOM2 = 0xAD,
+ PID_GPIOCOM1 = 0xAE,
+ PID_GPIOCOM0 = 0xAF,
+ PID_LPC = 0xC7,
+ PID_ITSS = 0xC4,
+ PID_RTC = 0xC3,
+ PID_SERIALIO = 0xCB,
+ PID_DMI = 0xEF,
+} PCH_SBI_PID;
+
+u8 pcr_read32(PCH_SBI_PID pid, u16 offset, u32 *outdata);
+u8 pcr_read16(PCH_SBI_PID pid, u16 offset, u16 *outdata);
+u8 pcr_read8(PCH_SBI_PID pid, u16 offset, u8 *outdata);
+u8 pcr_write32(PCH_SBI_PID pid, u16 offset, u32 indata);
+u8 pcr_write16(PCH_SBI_PID pid, u16 offset, u16 indata);
+u8 pcr_write8(PCH_SBI_PID pid, u16 offset, u8 indata);
+u8 pcr_andthenor32(PCH_SBI_PID pid, u16 offset, u32 anddata, u32 ordata);
+u8 pcr_andthenor16(PCH_SBI_PID pid, u16 offset, u16 anddata, u16 ordata);
+u8 pcr_andthenor8(PCH_SBI_PID pid, u16 offset, u8 anddata, u8 ordata);
+
+#endif /* _SOC_PCR_H_ */
diff --git a/src/soc/intel/skylake/include/soc/pei_data.h b/src/soc/intel/skylake/include/soc/pei_data.h
index e6147181f7..232843664a 100644
--- a/src/soc/intel/skylake/include/soc/pei_data.h
+++ b/src/soc/intel/skylake/include/soc/pei_data.h
@@ -1,7 +1,8 @@
/*
- * Broadwell UEFI PEI wrapper
+ * UEFI PEI wrapper
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -26,17 +27,16 @@
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#ifndef PEI_DATA_H
-#define PEI_DATA_H
+#ifndef _PEI_DATA_H_
+#define _PEI_DATA_H_
#include <types.h>
-#include <memory_info.h>
#define PEI_VERSION 22
#define ABI_X86 __attribute__((regparm(0)))
-typedef void ABI_X86 (*tx_byte_func)(unsigned char byte);
+typedef void ABI_X86(*tx_byte_func)(unsigned char byte);
enum board_type {
BOARD_TYPE_CRB_MOBILE = 0, /* CRB Mobile */
@@ -86,24 +86,19 @@ struct usb3_port_setting {
uint8_t fixed_eq;
} __attribute__((packed));
-struct pei_data
-{
+struct pei_data {
uint32_t pei_version;
enum board_type board_type;
int boot_mode;
int ec_present;
- int usbdebug;
/* Base addresses */
uint32_t pciexbar;
uint16_t smbusbar;
uint32_t xhcibar;
- uint32_t ehcibar;
uint32_t gttbar;
- uint32_t rcba;
uint32_t pmbase;
- uint32_t gpiobase;
uint32_t temp_mmio_base;
uint32_t tseg_size;
@@ -173,14 +168,15 @@ struct pei_data
* DQByteMap[5] - CmdVDQByteMap: Always program to [0xFF, 0]
* since we have 1 CA Vref
*/
- uint8_t dq_map[2][6][2];
+ uint8_t dq_map[2][12];
/*
* LPDDR3 Map from CPU DQS pins to SDRAM DQS pins
* [CHANNEL][MAX_BYTES]
*/
uint8_t dqs_map[2][8];
-
+ uint16_t RcompResistor[3];
+ uint16_t RcompTarget[5];
/* Data read from flash and passed into MRC */
const void *saved_data;
int saved_data_size;
@@ -191,9 +187,8 @@ struct pei_data
/* Data from MRC that should be saved to flash */
void *data_to_save;
int data_to_save_size;
- struct memory_info meminfo;
} __attribute__((packed));
typedef struct pei_data PEI_DATA;
-#endif
+#endif /* _PEI_DATA_H_ */
diff --git a/src/soc/intel/skylake/include/soc/pei_wrapper.h b/src/soc/intel/skylake/include/soc/pei_wrapper.h
index 3ade4ffff7..7d37c10e2e 100644
--- a/src/soc/intel/skylake/include/soc/pei_wrapper.h
+++ b/src/soc/intel/skylake/include/soc/pei_wrapper.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,15 +15,15 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_PEI_WRAPPER_H_
-#define _BROADWELL_PEI_WRAPPER_H_
+#ifndef _SOC_PEI_WRAPPER_H_
+#define _SOC_PEI_WRAPPER_H_
#include <soc/pei_data.h>
-typedef int ABI_X86 (*pei_wrapper_entry_t)(struct pei_data *pei_data);
+typedef int ABI_X86(*pei_wrapper_entry_t)(struct pei_data *pei_data);
static inline void pei_data_usb2_port(struct pei_data *pei_data, int port,
uint16_t length, uint8_t enable,
@@ -43,7 +44,7 @@ static inline void pei_data_usb3_port(struct pei_data *pei_data, int port,
pei_data->usb3_ports[port].fixed_eq = fixed_eq;
}
-void broadwell_fill_pei_data(struct pei_data *pei_data);
+void soc_fill_pei_data(struct pei_data *pei_data);
void mainboard_fill_pei_data(struct pei_data *pei_data);
#endif
diff --git a/src/soc/intel/skylake/include/soc/pm.h b/src/soc/intel/skylake/include/soc/pm.h
index 54fc4a7f1d..3be83f4add 100644
--- a/src/soc/intel/skylake/include/soc/pm.h
+++ b/src/soc/intel/skylake/include/soc/pm.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,11 +15,11 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_PM_H_
-#define _BROADWELL_PM_H_
+#ifndef _SOC_PM_H_
+#define _SOC_PM_H_
/* ACPI_BASE_ADDRESS / PMBASE */
@@ -76,12 +77,6 @@
#define SWGPE_CTRL (1 << 1)
#define DEVACT_STS 0x44
#define PM2_CNT 0x50
-#define TCO1_CNT 0x60
-#define TCO_TMR_HLT (1 << 11)
-#define TCO1_STS 0x64
-#define DMISCI_STS (1 << 9)
-#define TCO2_STS 0x66
-#define TCO2_STS_SECOND_TO (1 << 1)
#define GPE0_REG_MAX 4
#define GPE0_REG_SIZE 32
@@ -102,7 +97,7 @@
#define SWGPE_STS (1 << 2)
#define HOT_PLUG_STS (1 << 1)
#define GPE0_EN(x) (0x90 + (x * 4))
-#define WADT_en (1 << 18)
+#define WADT_EN (1 << 18)
#define GP27_EN (1 << 16)
#define PME_B0_EN (1 << 13)
#define ME_SCI_EN (1 << 12)
@@ -129,9 +124,8 @@ struct chipset_power_state {
uint16_t tco2_sts;
uint32_t gpe0_sts[4];
uint32_t gpe0_en[4];
- uint16_t gen_pmcon1;
- uint16_t gen_pmcon2;
- uint16_t gen_pmcon3;
+ uint16_t gen_pmcon_a;
+ uint16_t gen_pmcon_b;
int prev_sleep_state;
uint16_t hsio_version;
uint16_t hsio_checksum;
@@ -152,7 +146,8 @@ void disable_smi(uint32_t mask);
/* ALT_GP_SMI */
uint32_t clear_alt_smi_status(void);
-void enable_alt_smi(uint32_t mask);
+void enable_alt_smi(int gpionum, u32 mask);
+void reset_alt_smi_status(void);
/* TCO */
uint32_t clear_tco_status(void);
@@ -169,4 +164,9 @@ void disable_gpe(uint32_t mask);
/* Return the selected ACPI SCI IRQ */
int acpi_sci_irq(void);
+/* Get base address PMC memory mapped registers. */
+uint8_t *pmc_mmio_regs(void);
+/* Get base address of TCO I/O registers. */
+uint16_t pmc_tco_regs(void);
+
#endif
diff --git a/src/soc/intel/skylake/include/soc/pmc.h b/src/soc/intel/skylake/include/soc/pmc.h
new file mode 100644
index 0000000000..72c9a59e47
--- /dev/null
+++ b/src/soc/intel/skylake/include/soc/pmc.h
@@ -0,0 +1,71 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_PMC_H_
+#define _SOC_PMC_H_
+
+/* PCI Configuration Space (D31:F2): PMC */
+#define ABASE 0x40
+#define ACTL 0x44
+#define PWRM_EN (1 << 8)
+#define ACPI_EN (1 << 7)
+#define SCI_IRQ_SEL (7 << 0)
+#define SCIS_IRQ9 0
+#define SCIS_IRQ10 1
+#define SCIS_IRQ11 2
+#define SCIS_IRQ20 4
+#define SCIS_IRQ21 5
+#define SCIS_IRQ22 6
+#define SCIS_IRQ23 7
+#define PWRMBASE 0x48
+#define GEN_PMCON_A 0xa0
+#define SMI_LOCK (1 << 4)
+#define GEN_PMCON_B 0xa4
+#define SLP_STR_POL_LOCK (1 << 18)
+#define ACPI_BASE_LOCK (1 << 17)
+#define SUS_PWR_FLR (1 << 14)
+#define HOST_RST_STS (1 << 9)
+#define RTC_BATTERY_DEAD (1 << 2)
+#define PWR_FLR (1 << 1)
+#define SLEEP_AFTER_POWER_FAIL (1 << 0)
+#define ETR3 0xac
+#define ETR3_CF9LOCK (1 << 31)
+#define ETR3_CF9GR (1 << 20)
+
+/* Memory mapped IO registers in PMC */
+#define S3_PWRGATE_POL 0x28
+#define S3DC_GATE_SUS (1 << 1)
+#define S3AC_GATE_SUS (1 << 0)
+#define S4_PWRGATE_POL 0x2c
+#define S4DC_GATE_SUS (1 << 1)
+#define S4AC_GATE_SUS (1 << 0)
+#define S5_PWRGATE_POL 0x30
+#define S5DC_GATE_SUS (1 << 15)
+#define S5AC_GATE_SUS (1 << 14)
+#define PMSYNC_TPR_CFG 0xc4
+#define PMSYNC_LOCK (1 << 31)
+
+
+/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */
+#define TCO1_STS 0x04
+#define TCO2_STS 0x06
+#define TCO2_STS_SECOND_TO 0x02
+#define TCO2_STS_BOOT 0x04
+#define TCO1_CNT 0x08
+#define TCO_LOCK (1 << 12)
+#define TCO_TMR_HLT (1 << 11)
+
+#endif
diff --git a/src/soc/intel/skylake/include/soc/ramstage.h b/src/soc/intel/skylake/include/soc/ramstage.h
index 9242aa9ea3..fb06b3386f 100644
--- a/src/soc/intel/skylake/include/soc/ramstage.h
+++ b/src/soc/intel/skylake/include/soc/ramstage.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,25 +15,20 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_RAMSTAGE_H_
-#define _BROADWELL_RAMSTAGE_H_
+#ifndef _SOC_RAMSTAGE_H_
+#define _SOC_RAMSTAGE_H_
+#include <chip.h>
#include <device/device.h>
-#include <soc/intel/broadwell/chip.h>
+#include <soc/intel/common/ramstage.h>
-void broadwell_init_pre_device(void *chip_info);
-void broadwell_init_cpus(device_t dev);
-void broadwell_pch_enable_dev(device_t dev);
+void pch_enable_dev(device_t dev);
+void soc_init_pre_device(void *chip_info);
+void soc_init_cpus(device_t dev);
-#if CONFIG_HAVE_REFCODE_BLOB
-void broadwell_run_reference_code(void);
-#else
-static inline void broadwell_run_reference_code(void) { }
-#endif
-
-extern struct pci_operations broadwell_pci_ops;
+extern struct pci_operations soc_pci_ops;
#endif
diff --git a/src/soc/intel/skylake/include/soc/rcba.h b/src/soc/intel/skylake/include/soc/rcba.h
deleted file mode 100644
index 2c40d0720b..0000000000
--- a/src/soc/intel/skylake/include/soc/rcba.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef _BROADWELL_RCBA_H_
-#define _BROADWELL_RCBA_H_
-
-#include <soc/iomap.h>
-
-#define RCBA8(x) *((volatile u8 *)(RCBA_BASE_ADDRESS + x))
-#define RCBA16(x) *((volatile u16 *)(RCBA_BASE_ADDRESS + x))
-#define RCBA32(x) *((volatile u32 *)(RCBA_BASE_ADDRESS + x))
-
-#define RCBA_AND_OR(bits, x, and, or) \
- RCBA##bits(x) = ((RCBA##bits(x) & (and)) | (or))
-#define RCBA8_AND_OR(x, and, or) RCBA_AND_OR(8, x, and, or)
-#define RCBA16_AND_OR(x, and, or) RCBA_AND_OR(16, x, and, or)
-#define RCBA32_AND_OR(x, and, or) RCBA_AND_OR(32, x, and, or)
-#define RCBA32_OR(x, or) RCBA_AND_OR(32, x, ~0UL, or)
-
-#define RPC 0x0400 /* 32bit */
-#define RPFN 0x0404 /* 32bit */
-
-/* Root Port configuration space hide */
-#define RPFN_HIDE(port) (1 << (((port) * 4) + 3))
-/* Get the function number assigned to a Root Port */
-#define RPFN_FNGET(reg,port) (((reg) >> ((port) * 4)) & 7)
-/* Set the function number for a Root Port */
-#define RPFN_FNSET(port,func) (((func) & 7) << ((port) * 4))
-/* Root Port function number mask */
-#define RPFN_FNMASK(port) (7 << ((port) * 4))
-
-#define NOINT 0
-#define INTA 1
-#define INTB 2
-#define INTC 3
-#define INTD 4
-
-#define DIR_IDR 12 /* Interrupt D Pin Offset */
-#define DIR_ICR 8 /* Interrupt C Pin Offset */
-#define DIR_IBR 4 /* Interrupt B Pin Offset */
-#define DIR_IAR 0 /* Interrupt A Pin Offset */
-
-#define PIRQA 0
-#define PIRQB 1
-#define PIRQC 2
-#define PIRQD 3
-#define PIRQE 4
-#define PIRQF 5
-#define PIRQG 6
-#define PIRQH 7
-
-/* IO Buffer Programming */
-#define IOBPIRI 0x2330
-#define IOBPD 0x2334
-#define IOBPS 0x2338
-#define IOBPS_READY 0x0001
-#define IOBPS_TX_MASK 0x0006
-#define IOBPS_MASK 0xff00
-#define IOBPS_READ 0x0600
-#define IOBPS_WRITE 0x0700
-#define IOBPU 0x233a
-#define IOBPU_MAGIC 0xf000
-#define IOBP_PCICFG_READ 0x0400
-#define IOBP_PCICFG_WRITE 0x0500
-
-#define D31IP 0x3100 /* 32bit */
-#define D31IP_TTIP 24 /* Thermal Throttle Pin */
-#define D31IP_SIP2 20 /* SATA Pin 2 */
-#define D31IP_SMIP 12 /* SMBUS Pin */
-#define D31IP_SIP 8 /* SATA Pin */
-#define D30IP 0x3104 /* 32bit */
-#define D30IP_PIP 0 /* PCI Bridge Pin */
-#define D29IP 0x3108 /* 32bit */
-#define D29IP_E1P 0 /* EHCI #1 Pin */
-#define D28IP 0x310c /* 32bit */
-#define D28IP_P8IP 28 /* PCI Express Port 8 */
-#define D28IP_P7IP 24 /* PCI Express Port 7 */
-#define D28IP_P6IP 20 /* PCI Express Port 6 */
-#define D28IP_P5IP 16 /* PCI Express Port 5 */
-#define D28IP_P4IP 12 /* PCI Express Port 4 */
-#define D28IP_P3IP 8 /* PCI Express Port 3 */
-#define D28IP_P2IP 4 /* PCI Express Port 2 */
-#define D28IP_P1IP 0 /* PCI Express Port 1 */
-#define D27IP 0x3110 /* 32bit */
-#define D27IP_ZIP 0 /* HD Audio Pin */
-#define D26IP 0x3114 /* 32bit */
-#define D26IP_E2P 0 /* EHCI #2 Pin */
-#define D25IP 0x3118 /* 32bit */
-#define D25IP_LIP 0 /* GbE LAN Pin */
-#define D22IP 0x3124 /* 32bit */
-#define D22IP_KTIP 12 /* KT Pin */
-#define D22IP_IDERIP 8 /* IDE-R Pin */
-#define D22IP_MEI2IP 4 /* MEI #2 Pin */
-#define D22IP_MEI1IP 0 /* MEI #1 Pin */
-#define D20IP 0x3128 /* 32bit */
-#define D20IP_XHCI 0 /* XHCI Pin */
-#define D31IR 0x3140 /* 16bit */
-#define D30IR 0x3142 /* 16bit */
-#define D29IR 0x3144 /* 16bit */
-#define D28IR 0x3146 /* 16bit */
-#define D27IR 0x3148 /* 16bit */
-#define D26IR 0x314c /* 16bit */
-#define D25IR 0x3150 /* 16bit */
-#define D23IR 0x3158 /* 16bit */
-#define D22IR 0x315c /* 16bit */
-#define D20IR 0x3160 /* 16bit */
-#define D21IR 0x3164 /* 16bit */
-#define D19IR 0x3168 /* 16bit */
-#define ACPIIRQEN 0x31e0 /* 32bit */
-#define OIC 0x31fe /* 16bit */
-#define DEEP_S3_POL 0x3328 /* 32bit */
-#define DEEP_S3_EN_AC (1 << 0)
-#define DEEP_S3_EN_DC (1 << 1)
-#define DEEP_S5_POL 0x3330 /* 32bit */
-#define DEEP_S5_EN_AC (1 << 14)
-#define DEEP_S5_EN_DC (1 << 15)
-#define DEEP_SX_CONFIG 0x3334 /* 32bit */
-#define DEEP_SX_WAKE_PIN_EN (1 << 2)
-#define DEEP_SX_ACPRESENT_PD (1 << 1)
-#define DEEP_SX_GP27_PIN_EN (1 << 0)
-#define PMSYNC_CONFIG 0x33c4 /* 32bit */
-#define PMSYNC_CONFIG2 0x33cc /* 32bit */
-#define SOFT_RESET_CTRL 0x38f4
-#define SOFT_RESET_DATA 0x38f8
-
-#define DIR_ROUTE(a,b,c,d) \
- (((d) << DIR_IDR) | ((c) << DIR_ICR) | \
- ((b) << DIR_IBR) | ((a) << DIR_IAR))
-
-#define RC 0x3400 /* 32bit */
-#define HPTC 0x3404 /* 32bit */
-#define GCS 0x3410 /* 32bit */
-#define BUC 0x3414 /* 32bit */
-#define PCH_DISABLE_GBE (1 << 5)
-#define FD 0x3418 /* 32bit */
-#define FDSW 0x3420 /* 8bit */
-#define DISPBDF 0x3424 /* 16bit */
-#define FD2 0x3428 /* 32bit */
-#define CG 0x341c /* 32bit */
-
-/* Function Disable 1 RCBA 0x3418 */
-#define PCH_DISABLE_ALWAYS (1 << 0)
-#define PCH_DISABLE_ADSPD (1 << 1)
-#define PCH_DISABLE_SATA1 (1 << 2)
-#define PCH_DISABLE_SMBUS (1 << 3)
-#define PCH_DISABLE_HD_AUDIO (1 << 4)
-#define PCH_DISABLE_EHCI2 (1 << 13)
-#define PCH_DISABLE_LPC (1 << 14)
-#define PCH_DISABLE_EHCI1 (1 << 15)
-#define PCH_DISABLE_PCIE(x) (1 << (16 + x))
-#define PCH_DISABLE_THERMAL (1 << 24)
-#define PCH_DISABLE_SATA2 (1 << 25)
-#define PCH_DISABLE_XHCI (1 << 27)
-
-/* Function Disable 2 RCBA 0x3428 */
-#define PCH_DISABLE_KT (1 << 4)
-#define PCH_DISABLE_IDER (1 << 3)
-#define PCH_DISABLE_MEI2 (1 << 2)
-#define PCH_DISABLE_MEI1 (1 << 1)
-#define PCH_ENABLE_DBDF (1 << 0)
-
-#endif
diff --git a/src/soc/intel/skylake/include/soc/romstage.h b/src/soc/intel/skylake/include/soc/romstage.h
index b636223561..f030301bdb 100644
--- a/src/soc/intel/skylake/include/soc/romstage.h
+++ b/src/soc/intel/skylake/include/soc/romstage.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,38 +15,16 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_ROMSTAGE_H_
-#define _BROADWELL_ROMSTAGE_H_
+#ifndef _SOC_ROMSTAGE_H_
+#define _SOC_ROMSTAGE_H_
-#include <stdint.h>
-#include <arch/cpu.h>
-
-struct chipset_power_state;
-struct pei_data;
-struct romstage_params {
- unsigned long bist;
- struct chipset_power_state *power_state;
- struct pei_data *pei_data;
-};
-
-void mainboard_romstage_entry(struct romstage_params *params);
-void romstage_common(struct romstage_params *params);
-void *asmlinkage romstage_main(unsigned long bist, uint32_t tsc_lo,
- uint32_t tsc_high);
-void asmlinkage romstage_after_car(void);
-void raminit(struct pei_data *pei_data);
-void *setup_stack_and_mttrs(void);
+#include <soc/intel/common/romstage.h>
struct chipset_power_state;
struct chipset_power_state *fill_power_state(void);
-void report_platform_info(void);
-void report_memory_config(void);
-
-void set_max_freq(void);
-
void systemagent_early_init(void);
void pch_early_init(void);
void pch_uart_init(void);
@@ -56,6 +35,6 @@ int smbus_read_byte(unsigned device, unsigned address);
int early_spi_read(u32 offset, u32 size, u8 *buffer);
int early_spi_read_wpsr(u8 *sr);
+void mainboard_fill_spd_data(struct pei_data *pei_data);
-void mainboard_pre_console_init(void);
-#endif
+#endif /* _SOC_ROMSTAGE_H_ */
diff --git a/src/soc/intel/skylake/include/soc/sata.h b/src/soc/intel/skylake/include/soc/sata.h
deleted file mode 100644
index 73e7b3150a..0000000000
--- a/src/soc/intel/skylake/include/soc/sata.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef _BROADWELL_SATA_H_
-#define _BROADWELL_SATA_H_
-
-#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */
-#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */
-#define SATA_SP 0xd0 /* Scratchpad */
-
-/* SATA IOBP Registers */
-#define SATA_IOBP_SP0_SECRT88 0xea002688
-#define SATA_IOBP_SP1_SECRT88 0xea002488
-
-#define SATA_SECRT88_VADJ_MASK 0xff
-#define SATA_SECRT88_VADJ_SHIFT 16
-
-#define SATA_IOBP_SP0DTLE_DATA 0xea002550
-#define SATA_IOBP_SP0DTLE_EDGE 0xea002554
-#define SATA_IOBP_SP1DTLE_DATA 0xea002750
-#define SATA_IOBP_SP1DTLE_EDGE 0xea002754
-
-#define SATA_DTLE_MASK 0xF
-#define SATA_DTLE_DATA_SHIFT 24
-#define SATA_DTLE_EDGE_SHIFT 16
-
-/* PCI Configuration Space (D31:F1): IDE */
-#define INTR_LN 0x3c
-#define IDE_TIM_PRI 0x40 /* IDE timings, primary */
-#define IDE_DECODE_ENABLE (1 << 15)
-#define IDE_SITRE (1 << 14)
-#define IDE_ISP_5_CLOCKS (0 << 12)
-#define IDE_ISP_4_CLOCKS (1 << 12)
-#define IDE_ISP_3_CLOCKS (2 << 12)
-#define IDE_RCT_4_CLOCKS (0 << 8)
-#define IDE_RCT_3_CLOCKS (1 << 8)
-#define IDE_RCT_2_CLOCKS (2 << 8)
-#define IDE_RCT_1_CLOCKS (3 << 8)
-#define IDE_DTE1 (1 << 7)
-#define IDE_PPE1 (1 << 6)
-#define IDE_IE1 (1 << 5)
-#define IDE_TIME1 (1 << 4)
-#define IDE_DTE0 (1 << 3)
-#define IDE_PPE0 (1 << 2)
-#define IDE_IE0 (1 << 1)
-#define IDE_TIME0 (1 << 0)
-#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */
-
-#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */
-#define IDE_SSDE1 (1 << 3)
-#define IDE_SSDE0 (1 << 2)
-#define IDE_PSDE1 (1 << 1)
-#define IDE_PSDE0 (1 << 0)
-
-#define IDE_SDMA_TIM 0x4a
-
-#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */
-#define SIG_MODE_SEC_NORMAL (0 << 18)
-#define SIG_MODE_SEC_TRISTATE (1 << 18)
-#define SIG_MODE_SEC_DRIVELOW (2 << 18)
-#define SIG_MODE_PRI_NORMAL (0 << 16)
-#define SIG_MODE_PRI_TRISTATE (1 << 16)
-#define SIG_MODE_PRI_DRIVELOW (2 << 16)
-#define FAST_SCB1 (1 << 15)
-#define FAST_SCB0 (1 << 14)
-#define FAST_PCB1 (1 << 13)
-#define FAST_PCB0 (1 << 12)
-#define SCB1 (1 << 3)
-#define SCB0 (1 << 2)
-#define PCB1 (1 << 1)
-#define PCB0 (1 << 0)
-
-#endif
diff --git a/src/soc/intel/skylake/include/soc/serialio.h b/src/soc/intel/skylake/include/soc/serialio.h
index 2fd6dca973..0bc07c30d7 100644
--- a/src/soc/intel/skylake/include/soc/serialio.h
+++ b/src/soc/intel/skylake/include/soc/serialio.h
@@ -1,7 +1,8 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -11,84 +12,44 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#ifndef _BROADWELL_SERIALIO_H_
-#define _BROADWELL_SERIALIO_H_
-
-/* Serial IO IOBP Registers */
-#define SIO_IOBP_PORTCTRL0 0xcb000000 /* SDIO D23:F0 */
-#define SIO_IOBP_PORTCTRL0_ACPI_IRQ_EN (1 << 5)
-#define SIO_IOBP_PORTCTRL0_PCI_CONF_DIS (1 << 4)
-#define SIO_IOBP_PORTCTRL1 0xcb000014 /* SDIO D23:F0 */
-#define SIO_IOBP_PORTCTRL1_SNOOP_SELECT(x) (((x) & 3) << 13)
-#define SIO_IOBP_GPIODF 0xcb000154
-#define SIO_IOBP_GPIODF_SDIO_IDLE_DET_EN (1 << 4)
-#define SIO_IOBP_GPIODF_DMA_IDLE_DET_EN (1 << 3)
-#define SIO_IOBP_GPIODF_UART_IDLE_DET_EN (1 << 2)
-#define SIO_IOBP_GPIODF_I2C_IDLE_DET_EN (1 << 1)
-#define SIO_IOBP_GPIODF_SPI_IDLE_DET_EN (1 << 0)
-#define SIO_IOBP_GPIODF_UART0_BYTE_ACCESS (1 << 10)
-#define SIO_IOBP_GPIODF_UART1_BYTE_ACCESS (1 << 11)
-#define SIO_IOBP_PORTCTRL2 0xcb000240 /* DMA D21:F0 */
-#define SIO_IOBP_PORTCTRL3 0xcb000248 /* I2C0 D21:F1 */
-#define SIO_IOBP_PORTCTRL4 0xcb000250 /* I2C1 D21:F2 */
-#define SIO_IOBP_PORTCTRL5 0xcb000258 /* SPI0 D21:F3 */
-#define SIO_IOBP_PORTCTRL6 0xcb000260 /* SPI1 D21:F4 */
-#define SIO_IOBP_PORTCTRL7 0xcb000268 /* UART0 D21:F5 */
-#define SIO_IOBP_PORTCTRL8 0xcb000270 /* UART1 D21:F6 */
-#define SIO_IOBP_PORTCTRLX(x) (0xcb000240 + ((x) * 8))
-/* PORTCTRL 2-8 have the same layout */
-#define SIO_IOBP_PORTCTRL_ACPI_IRQ_EN (1 << 21)
-#define SIO_IOBP_PORTCTRL_PCI_CONF_DIS (1 << 20)
-#define SIO_IOBP_PORTCTRL_SNOOP_SELECT(x) (((x) & 3) << 18)
-#define SIO_IOBP_PORTCTRL_INT_PIN(x) (((x) & 0xf) << 2)
-#define SIO_IOBP_PORTCTRL_PM_CAP_PRSNT (1 << 1)
-#define SIO_IOBP_FUNCDIS0 0xce00aa07 /* DMA D21:F0 */
-#define SIO_IOBP_FUNCDIS1 0xce00aa47 /* I2C0 D21:F1 */
-#define SIO_IOBP_FUNCDIS2 0xce00aa87 /* I2C1 D21:F2 */
-#define SIO_IOBP_FUNCDIS3 0xce00aac7 /* SPI0 D21:F3 */
-#define SIO_IOBP_FUNCDIS4 0xce00ab07 /* SPI1 D21:F4 */
-#define SIO_IOBP_FUNCDIS5 0xce00ab47 /* UART0 D21:F5 */
-#define SIO_IOBP_FUNCDIS6 0xce00ab87 /* UART1 D21:F6 */
-#define SIO_IOBP_FUNCDIS7 0xce00ae07 /* SDIO D23:F0 */
-#define SIO_IOBP_FUNCDIS_DIS (1 << 8)
+#ifndef _SERIALIO_H_
+#define _SERIALIO_H_
-/* Serial IO Devices */
-#define SIO_ID_SDMA 0 /* D21:F0 */
-#define SIO_ID_I2C0 1 /* D21:F1 */
-#define SIO_ID_I2C1 2 /* D21:F2 */
-#define SIO_ID_SPI0 3 /* D21:F3 */
-#define SIO_ID_SPI1 4 /* D21:F4 */
-#define SIO_ID_UART0 5 /* D21:F5 */
-#define SIO_ID_UART1 6 /* D21:F6 */
-#define SIO_ID_SDIO 7 /* D23:F0 */
+#define SIO_REG_PPR_CLOCK 0x200
+#define SIO_REG_PPR_CLOCK_EN (1 << 0)
+#define SIO_REG_PPR_CLOCK_UPDATE (1 << 31)
+#define SIO_REG_PPR_CLOCK_N_DIV 0xc35
+#define SIO_REG_PPR_CLOCK_M_DIV 0x30
-#define SIO_REG_PPR_CLOCK 0x800
-#define SIO_REG_PPR_CLOCK_EN (1 << 0)
-#define SIO_REG_PPR_CLOCK_UPDATE (1 << 31)
-#define SIO_REG_PPR_CLOCK_M_DIV 0x25a
-#define SIO_REG_PPR_CLOCK_N_DIV 0x7fff
-#define SIO_REG_PPR_RST 0x804
-#define SIO_REG_PPR_RST_ASSERT 0x3
-#define SIO_REG_PPR_GEN 0x808
-#define SIO_REG_PPR_GEN_LTR_MODE_MASK (1 << 2)
-#define SIO_REG_PPR_GEN_VOLTAGE_MASK (1 << 3)
-#define SIO_REG_PPR_GEN_VOLTAGE(x) ((x & 1) << 3)
-#define SIO_REG_AUTO_LTR 0x814
+#define SIO_REG_PPR_RESETS 0x204
+#define SIO_REG_PPR_RESETS_FUNC (1 << 0)
+#define SIO_REG_PPR_RESETS_APB (1 << 1)
+#define SIO_REG_PPR_RESETS_IDMA (1 << 2)
-#define SIO_REG_SDIO_PPR_GEN 0x1008
-#define SIO_REG_SDIO_PPR_SW_LTR 0x1010
-#define SIO_REG_SDIO_PPR_CMD12 0x3c
-#define SIO_REG_SDIO_PPR_CMD12_B30 (1 << 30)
+typedef enum {
+ PchSerialIoDisabled,
+ PchSerialIoAcpi,
+ PchSerialIoPci,
+ PchSerialIoAcpiHidden,
+ PchSerialIoLegacyUart
+} PCH_SERIAL_IO_MODE;
-#define SIO_PIN_INTA 1 /* IRQ5 in ACPI mode */
-#define SIO_PIN_INTB 2 /* IRQ6 in ACPI mode */
-#define SIO_PIN_INTC 3 /* IRQ7 in ACPI mode */
-#define SIO_PIN_INTD 4 /* IRQ13 in ACPI mode */
+typedef enum {
+ PchSerialIoIndexI2C0,
+ PchSerialIoIndexI2C1,
+ PchSerialIoIndexI2C2,
+ PchSerialIoIndexI2C3,
+ PchSerialIoIndexI2C4,
+ PchSerialIoIndexI2C5,
+ PchSerialIoIndexSpi0,
+ PchSerialIoIndexSpi1,
+ PchSerialIoIndexUart0,
+ PchSerialIoIndexUart1,
+ PchSerialIoIndexUart2,
+ PchSerialIoIndexMax
+} PCH_SERIAL_IO_CONTROLLER;
#endif
+
diff --git a/src/soc/intel/skylake/include/soc/smbus.h b/src/soc/intel/skylake/include/soc/smbus.h
index fb13c2d8a9..c081cdf3e3 100644
--- a/src/soc/intel/skylake/include/soc/smbus.h
+++ b/src/soc/intel/skylake/include/soc/smbus.h
@@ -4,6 +4,7 @@
* Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
* Copyright (C) 2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -16,17 +17,19 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_SMBUS_H_
-#define _BROADWELL_SMBUS_H_
+#ifndef _SOC_SMBUS_H_
+#define _SOC_SMBUS_H_
/* PCI Configuration Space (D31:F3): SMBus */
#define SMB_BASE 0x20
#define HOSTC 0x40
#define HST_EN (1 << 0)
#define SMB_RCV_SLVA 0x09
+/* SMBUS TCO base address. */
+#define TCOBASE 0x50
/* SMBus I/O bits. */
#define SMBHSTSTAT 0x0
diff --git a/src/soc/intel/skylake/include/soc/smm.h b/src/soc/intel/skylake/include/soc/smm.h
index f7f515cd9b..d89530287e 100644
--- a/src/soc/intel/skylake/include/soc/smm.h
+++ b/src/soc/intel/skylake/include/soc/smm.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,14 +15,16 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_SMM_H_
-#define _BROADWELL_SMM_H_
+#ifndef _SOC_SMM_H_
+#define _SOC_SMM_H_
#include <stdint.h>
#include <cpu/x86/msr.h>
+#include <soc/intel/common/romstage.h>
+#include <soc/intel/common/memmap.h>
struct ied_header {
char signature[10];
@@ -40,23 +43,16 @@ struct smm_relocation_params {
msr_t emrr_mask;
msr_t uncore_emrr_base;
msr_t uncore_emrr_mask;
- /* The smm_save_state_in_msrs field indicates if SMM save state
+ /*
+ * The smm_save_state_in_msrs field indicates if SMM save state
* locations live in MSRs. This indicates to the CPUs how to adjust
- * the SMMBASE and IEDBASE */
+ * the SMMBASE and IEDBASE
+ */
int smm_save_state_in_msrs;
};
-/* There is a bug in the order of Kconfig includes in that arch/x86/Kconfig
- * is included after chipset code. This causes the chipset's Kconfig to be
- * clobbered by the arch/x86/Kconfig if they have the same name. */
-static inline int smm_region_size(void)
-{
- /* Make it 8MiB by default. */
- if (CONFIG_SMM_TSEG_SIZE == 0)
- return (8 << 20);
- return CONFIG_SMM_TSEG_SIZE;
-}
-
+#define smm_region_size mmap_region_granluarity
+#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
int smm_initialize(void);
void smm_relocate(void);
@@ -64,10 +60,24 @@ void smm_relocate(void);
void southbridge_trigger_smi(void);
void southbridge_clear_smi_status(void);
-/* The initialization of the southbridge is split into 2 components. One is
+/*
+ * The initialization of the southbridge is split into 2 compoments. One is
* for clearing the state in the SMM registers. The other is for enabling
- * SMIs. They are split so that other work between the 2 actions. */
+ * SMIs.
+ */
void southbridge_smm_clear_state(void);
void southbridge_smm_enable_smi(void);
+#else /* CONFIG_HAVE_SMI_HANDLER */
+static inline int smm_initialize(void)
+{
+ return 0;
+}
+
+static inline void smm_relocate(void) {}
+static inline void southbridge_trigger_smi(void) {}
+static inline void southbridge_clear_smi_status(void) {}
+static inline void southbridge_smm_clear_state(void) {}
+static inline void southbridge_smm_enable_smi(void) {}
+#endif /* CONFIG_HAVE_SMI_HANDLER */
#endif
diff --git a/src/soc/intel/skylake/include/soc/spi.h b/src/soc/intel/skylake/include/soc/spi.h
index 1449e29cda..a31c9b2ceb 100644
--- a/src/soc/intel/skylake/include/soc/spi.h
+++ b/src/soc/intel/skylake/include/soc/spi.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,39 +15,39 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_SPI_H_
-#define _BROADWELL_SPI_H_
+#ifndef _SOC_SPI_H_
+#define _SOC_SPI_H_
/*
* SPI Opcode Menu setup for SPIBAR lockdown
* should support most common flash chips.
*/
-
-#define SPIBAR_OFFSET 0x3800
-#define SPIBAR8(x) RCBA8(x + SPIBAR_OFFSET)
-#define SPIBAR16(x) RCBA16(x + SPIBAR_OFFSET)
-#define SPIBAR32(x) RCBA32(x + SPIBAR_OFFSET)
-
-/* Registers within the SPIBAR */
-#define SPIBAR_SSFC 0x91
-#define SPIBAR_FDOC 0xb0
-#define SPIBAR_FDOD 0xb4
-
-#define SPI_PRR_MAX 5
-#define SPI_PRR(x) (0x74 + ((x) * 4))
-#define SPI_PRR_SHIFT 12
-#define SPI_PRR_MASK 0x1fff
-#define SPI_PRR_BASE_SHIFT 0
-#define SPI_PRR_LIMIT_SHIFT 16
-#define SPI_PRR_WPE (1 << 31)
-
-#define SPIBAR_PREOP 0x94
-#define SPIBAR_OPTYPE 0x96
-#define SPIBAR_OPMENU_LOWER 0x98
-#define SPIBAR_OPMENU_UPPER 0x9c
+#define SPIDVID_OFFSET 0x0
+/* Temporay SPI BASE ADDRESS */
+#define TEMP_SPI_BAR 0xFE010000
+/* SPI BASE ADDRESS Register */
+#define B_PCH_SPI_BAR0_MASK 0x0FFF
+#define PCH_SPI_BASE_ADDRESS 0x10
+#define SPIBAR_MEMBAR_MASK 0xFFFFF000
+/* Reigsters within the SPIBAR */
+#define SPIBAR_SSFC 0xA1
+
+#define SPIBAR_PREOP 0xA4
+#define SPIBAR_OPTYPE 0xA6
+#define SPIBAR_OPMENU_LOWER 0xA8
+#define SPIBAR_OPMENU_UPPER 0xAc
+/* STRAP LOCK Register */
+#define SPIBAR_RESET_LOCK 0xF0
+#define SPIBAR_RESET_LOCK_DISABLE 0
+#define SPIBAR_RESET_LOCK_ENABLE 1
+/* STRAP MSG Control Register*/
+#define SPIBAR_RESET_CTRL 0xF4
+#define SPIBAR_RESET_CTRL_SSMC 1
+/* STRAP Data Register*/
+#define SPIBAR_RESET_DATA 0xF8
#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */
#define SPI_OPTYPE_0 0x01 /* Write, no address */
@@ -78,33 +79,52 @@
(SPI_OPMENU_1 << 8) | SPI_OPMENU_0)
#define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \
- (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \
- (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \
+ (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \
+ (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \
(SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0))
#define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */
-#define SPIBAR_HSFS 0x04 /* SPI hardware sequence status */
-#define SPIBAR_HSFS_FLOCKDN (1 << 15)/* Flash Configuration Lock-Down */
-#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */
-#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */
-#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */
-#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */
-#define SPIBAR_HSFC 0x06 /* SPI hardware sequence control */
-#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8)
-#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */
-#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */
-#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */
-#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */
-#define SPIBAR_FADDR 0x08 /* SPI flash address */
-#define SPIBAR_FDATA(n) (0x10 + (4 * n)) /* SPI flash data */
-#define SPIBAR_SSFS 0x90
-#define SPIBAR_SSFS_ERROR (1 << 3)
-#define SPIBAR_SSFS_DONE (1 << 2)
-#define SPIBAR_SSFC 0x91
-#define SPIBAR_SSFC_DATA (1 << 14)
-#define SPIBAR_SSFC_GO (1 << 1)
-
-int spi_flash_protect(u32 start, u32 size);
-
+#define SPIBAR_HSFS 0x04 /* SPI hardware sequence status */
+#define SPIBAR_HSFS_FLOCKDN (1 << 15)/* Flash Configuration Lock-Down */
+#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */
+#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */
+#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */
+#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */
+#define SPIBAR_HSFS_BERASE_MASK 3 /* Block/Sector Erase MASK */
+#define SPIBAR_HSFS_BERASE_OFFSET 3 /* Block/Sector Erase OFFSET */
+#define SPIBAR_HSFC 0x06 /* SPI hardware sequence control */
+#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8)
+#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */
+#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */
+#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */
+#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */
+#define SPIBAR_FADDR 0x08 /* SPI flash address */
+#define SPIBAR_FADDR_MASK 0x7FFFFFF
+
+#define SPIBAR_FDATA(n) (0x10 + (4 * n)) /* SPI flash data */
+#define SPIBAR_FPR(n) (0x84 + (4 * n)) /* SPI flash protected range */
+#define SPIBAR_FPR_WPE (1 << 31) /* Flash Write protected */
+#define SPIBAR_SSFS 0xA0
+#define SPIBAR_SSFS_ERROR (1 << 3)
+#define SPIBAR_SSFS_DONE (1 << 2)
+#define SPIBAR_SSFC 0xA1
+#define SPIBAR_SSFC_DATA (1 << 14)
+#define SPIBAR_SSFC_GO (1 << 1)
+
+#define SPIBAR_FDOC 0xB4
+#define SPIBAR_FDOC_COMPONENT (1 << 12)
+#define SPIBAR_FDOC_FDSI_1 (1 << 2)
+
+#define SPIBAR_FDOD 0xB8
+#define FLCOMP_C0DEN_MASK 0xF
+#define FLCOMP_C0DEN_8MB 4
+#define FLCOMP_C0DEN_16MB 5
+#define FLCOMP_C0DEN_32MB 6
+
+#define SPIBAR_BIOS_CNTL 0xDC
+#define SPIBAR_BC_WPD (1 << 0)
+#define SPIBAR_BC_EISS (1 << 5)
+
+void *get_spi_bar(void);
#endif
diff --git a/src/soc/intel/skylake/include/soc/systemagent.h b/src/soc/intel/skylake/include/soc/systemagent.h
index 325a4a5a6c..6bb5c66d2a 100644
--- a/src/soc/intel/skylake/include/soc/systemagent.h
+++ b/src/soc/intel/skylake/include/soc/systemagent.h
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2008 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,31 +16,23 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_SYSTEMAGENT_H_
-#define _BROADWELL_SYSTEMAGENT_H_
+#ifndef _SOC_SYSTEMAGENT_H_
+#define _SOC_SYSTEMAGENT_H_
#include <soc/iomap.h>
#define SA_IGD_OPROM_VENDEV 0x80860406
-#define IGD_HASWELL_ULT_GT1 0x0a06
-#define IGD_HASWELL_ULT_GT2 0x0a16
-#define IGD_HASWELL_ULT_GT3 0x0a26
-#define IGD_BROADWELL_U_GT1 0x1606
-#define IGD_BROADWELL_U_GT2 0x1616
-#define IGD_BROADWELL_U_GT3_15W 0x1626
-#define IGD_BROADWELL_U_GT3_28W 0x162b
-#define IGD_BROADWELL_Y_GT2 0x161e
-#define IGD_BROADWELL_H_GT2 0x1612
-#define IGD_BROADWELL_H_GT3 0x1622
-
-#define MCH_BROADWELL_ID_U_Y 0x1604
-#define MCH_BROADWELL_REV_D0 0x06
-#define MCH_BROADWELL_REV_E0 0x08
-#define MCH_BROADWELL_REV_F0 0x09
+#define IGD_SKYLAKE_GT1_SULTM 0x1906
+#define IGD_SKYLAKE_GT2_SULXM 0x191E
+#define IGD_SKYLAKE_GT2_SULTM 0x1916
+
+#define MCH_SKYLAKE_ID_U 0x1904
+#define MCH_SKYLAKE_ID_Y 0x190c
+#define MCH_SKYLAKE_ID_ULX 0x1924
/* Device 0:0.0 PCI configuration space */
@@ -91,9 +84,9 @@
/* MCHBAR */
-#define MCHBAR8(x) *((volatile u8 *)(MCH_BASE_ADDRESS + x))
-#define MCHBAR16(x) *((volatile u16 *)(MCH_BASE_ADDRESS + x))
-#define MCHBAR32(x) *((volatile u32 *)(MCH_BASE_ADDRESS + x))
+#define MCHBAR8(x) (*(volatile u8 *)(MCH_BASE_ADDRESS + x))
+#define MCHBAR16(x) (*(volatile u16 *)(MCH_BASE_ADDRESS + x))
+#define MCHBAR32(x) (*(volatile u32 *)(MCH_BASE_ADDRESS + x))
#define MCHBAR_PEI_VERSION 0x5034
#define BIOS_RESET_CPL 0x5da8
@@ -115,8 +108,6 @@
#define MAILBOX_BIOS_CMD_FSM_MEASURE_INTVL 0x909
#define MAILBOX_BIOS_CMD_READ_PCH_POWER 0xa
#define MAILBOX_BIOS_CMD_READ_PCH_POWER_EXT 0xb
-#define MAILBOX_BIOS_CMD_READ_C9C10_VOLTAGE 0x26
-#define MAILBOX_BIOS_CMD_WRITE_C9C10_VOLTAGE 0x27
/* Errors are returned back in bits 7:0. */
#define MAILBOX_BIOS_ERROR_NONE 0
#define MAILBOX_BIOS_ERROR_INVALID_COMMAND 1
diff --git a/src/soc/intel/skylake/include/soc/xhci.h b/src/soc/intel/skylake/include/soc/xhci.h
index 2b899a3d75..8830ede865 100644
--- a/src/soc/intel/skylake/include/soc/xhci.h
+++ b/src/soc/intel/skylake/include/soc/xhci.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,11 +15,13 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_XHCI_H_
-#define _BROADWELL_XHCI_H_
+#ifndef _SOC_XHCI_H_
+#define _SOC_XHCI_H_
+
+#include <rules.h>
/* XHCI PCI Registers */
#define XHCI_PWR_CTL_STS 0x74
@@ -39,14 +42,14 @@
#define XHCI_USB3PDO 0xe8
/* XHCI Memory Registers */
-#define XHCI_USB3_PORTSC(port) (0x530 + (port * 0x10))
+#define XHCI_USB3_PORTSC(port) (0x510 + (port * 0x10))
#define XHCI_USB3_PORTSC_CHST (0x7f << 17)
#define XHCI_USB3_PORTSC_WCE (1 << 25) /* Wake on Connect */
#define XHCI_USB3_PORTSC_WDE (1 << 26) /* Wake on Disconnect */
#define XHCI_USB3_PORTSC_WOE (1 << 27) /* Wake on Overcurrent */
#define XHCI_USB3_PORTSC_WRC (1 << 19) /* Warm Reset Complete */
-#define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */
-#define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */
+#define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */
+#define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */
#define XHCI_USB3_PORTSC_WPR (1 << 31) /* Warm Port Reset */
#define XHCI_USB3_PORTSC_PLS (0xf << 5) /* Port Link State */
#define XHCI_PLSR_DISABLED (4 << 5) /* Port is disabled */
@@ -54,7 +57,7 @@
#define XHCI_PLSR_POLLING (7 << 5) /* Port is polling */
#define XHCI_PLSW_ENABLE (5 << 5) /* Transition from disabled */
-#ifdef __SMM__
+#if ENV_SMM
void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ);
#endif
diff --git a/src/soc/intel/skylake/iobp.c b/src/soc/intel/skylake/iobp.c
deleted file mode 100644
index 870f6af597..0000000000
--- a/src/soc/intel/skylake/iobp.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <delay.h>
-#include <arch/io.h>
-#include <soc/iobp.h>
-#include <soc/rcba.h>
-
-#define IOBP_RETRY 1000
-
-static inline int iobp_poll(void)
-{
- unsigned try;
-
- for (try = IOBP_RETRY; try > 0; try--) {
- u16 status = RCBA16(IOBPS);
- if ((status & IOBPS_READY) == 0)
- return 1;
- udelay(10);
- }
-
- printk(BIOS_ERR, "IOBP: timeout waiting for transaction to complete\n");
- return 0;
-}
-
-u32 pch_iobp_read(u32 address)
-{
- u16 status;
-
- if (!iobp_poll())
- return 0;
-
- /* Set the address */
- RCBA32(IOBPIRI) = address;
-
- /* READ OPCODE */
- status = RCBA16(IOBPS);
- status &= ~IOBPS_MASK;
- status |= IOBPS_READ;
- RCBA16(IOBPS) = status;
-
- /* Undocumented magic */
- RCBA16(IOBPU) = IOBPU_MAGIC;
-
- /* Set ready bit */
- status = RCBA16(IOBPS);
- status |= IOBPS_READY;
- RCBA16(IOBPS) = status;
-
- if (!iobp_poll())
- return 0;
-
- /* Check for successful transaction */
- status = RCBA16(IOBPS);
- if (status & IOBPS_TX_MASK) {
- printk(BIOS_ERR, "IOBP: read 0x%08x failed\n", address);
- return 0;
- }
-
- /* Read IOBP data */
- return RCBA32(IOBPD);
-}
-
-void pch_iobp_write(u32 address, u32 data)
-{
- u16 status;
-
- if (!iobp_poll())
- return;
-
- /* Set the address */
- RCBA32(IOBPIRI) = address;
-
- /* WRITE OPCODE */
- status = RCBA16(IOBPS);
- status &= ~IOBPS_MASK;
- status |= IOBPS_WRITE;
- RCBA16(IOBPS) = status;
-
- RCBA32(IOBPD) = data;
-
- /* Undocumented magic */
- RCBA16(IOBPU) = IOBPU_MAGIC;
-
- /* Set ready bit */
- status = RCBA16(IOBPS);
- status |= IOBPS_READY;
- RCBA16(IOBPS) = status;
-
- if (!iobp_poll())
- return;
-
- /* Check for successful transaction */
- status = RCBA16(IOBPS);
- if (status & IOBPS_TX_MASK)
- printk(BIOS_ERR, "IOBP: write 0x%08x failed\n", address);
-}
-
-void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue)
-{
- u32 data = pch_iobp_read(address);
-
- /* Update the data */
- data &= andvalue;
- data |= orvalue;
-
- pch_iobp_write(address, data);
-}
-
-void pch_iobp_exec(u32 addr, u16 op_code, u8 route_id, u32 *data, u8 *resp)
-{
- if (!data || !resp)
- return;
-
- *resp = -1;
- if (!iobp_poll())
- return;
-
- /* RCBA2330[31:0] = Address */
- RCBA32(IOBPIRI) = addr;
- /* RCBA2338[15:8] = opcode */
- RCBA16(IOBPS) = (RCBA16(IOBPS) & 0x00ff) | op_code;
- /* RCBA233A[15:8] = 0xf0 RCBA233A[7:0] = Route ID */
- RCBA16(IOBPU) = IOBPU_MAGIC | route_id;
-
- RCBA32(IOBPD) = *data;
- /* Set RCBA2338[0] to trigger IOBP transaction*/
- RCBA16(IOBPS) = RCBA16(IOBPS) | 0x1;
-
- if (!iobp_poll())
- return;
-
- *resp = (RCBA16(IOBPS) & IOBPS_TX_MASK) >> 1;
- *data = RCBA32(IOBPD);
-}
diff --git a/src/soc/intel/skylake/lpc.c b/src/soc/intel/skylake/lpc.c
index 6cc11165c3..64dfa22a9c 100644
--- a/src/soc/intel/skylake/lpc.c
+++ b/src/soc/intel/skylake/lpc.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,15 +16,16 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
+#include <arch/acpigen.h>
+#include "chip.h"
#include <console/console.h>
#include <delay.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
-#include <pc80/mc146818rtc.h>
#include <pc80/isa-dma.h>
#include <pc80/i8259.h>
#include <arch/io.h>
@@ -34,21 +36,17 @@
#include <cbmem.h>
#include <reg_script.h>
#include <string.h>
+#include <soc/acpi.h>
#include <soc/gpio.h>
-#include <soc/iobp.h>
#include <soc/iomap.h>
#include <soc/lpc.h>
#include <soc/nvs.h>
#include <soc/pch.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
+#include <soc/pmc.h>
#include <soc/ramstage.h>
-#include <soc/rcba.h>
-#include <soc/intel/broadwell/chip.h>
-#include <arch/acpi.h>
-#include <arch/acpigen.h>
-#include <cpu/cpu.h>
-
+#include <soc/pcr.h>
#if IS_ENABLED(CONFIG_CHROMEOS)
#include <vendorcode/google/chromeos/chromeos.h>
#endif
@@ -57,25 +55,26 @@ static void pch_enable_ioapic(struct device *dev)
{
u32 reg32;
- set_ioapic_id(VIO_APIC_VADDR, 0x02);
+ set_ioapic_id((void *)IO_APIC_ADDR, 0x02);
/* affirm full set of redirection table entries ("write once") */
- reg32 = io_apic_read(VIO_APIC_VADDR, 0x01);
+ reg32 = io_apic_read((void *)IO_APIC_ADDR, 0x01);
/* PCH-LP has 39 redirection entries */
reg32 &= ~0x00ff0000;
reg32 |= 0x00270000;
- io_apic_write(VIO_APIC_VADDR, 0x01, reg32);
+ io_apic_write((void *)IO_APIC_ADDR, 0x01, reg32);
/*
* Select Boot Configuration register (0x03) and
* use Processor System Bus (0x01) to deliver interrupts.
*/
- io_apic_write(VIO_APIC_VADDR, 0x03, 0x01);
+ io_apic_write((void *)IO_APIC_ADDR, 0x03, 0x01);
}
-/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
+/*
+ * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
* 0x00 - 0000 = Reserved
* 0x01 - 0001 = Reserved
* 0x02 - 0010 = Reserved
@@ -101,18 +100,17 @@ static void pch_pirq_init(device_t dev)
device_t irq_dev;
config_t *config = dev->chip_info;
- pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing);
- pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing);
- pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing);
- pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing);
+ pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQA_ROUT, config->pirqa_routing);
+ pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQB_ROUT, config->pirqb_routing);
+ pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQC_ROUT, config->pirqc_routing);
+ pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQD_ROUT, config->pirqd_routing);
+ pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQE_ROUT, config->pirqe_routing);
+ pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQF_ROUT, config->pirqf_routing);
+ pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQG_ROUT, config->pirqg_routing);
+ pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQH_ROUT, config->pirqh_routing);
- pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing);
- pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing);
- pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing);
- pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing);
-
- for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
- u8 int_pin=0, int_line=0;
+ for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
+ u8 int_pin = 0, int_line = 0;
if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI)
continue;
@@ -120,10 +118,18 @@ static void pch_pirq_init(device_t dev)
int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
switch (int_pin) {
- case 1: /* INTA# */ int_line = config->pirqa_routing; break;
- case 2: /* INTB# */ int_line = config->pirqb_routing; break;
- case 3: /* INTC# */ int_line = config->pirqc_routing; break;
- case 4: /* INTD# */ int_line = config->pirqd_routing; break;
+ case 1: /* INTA# */
+ int_line = config->pirqa_routing;
+ break;
+ case 2: /* INTB# */
+ int_line = config->pirqb_routing;
+ break;
+ case 3: /* INTC# */
+ int_line = config->pirqc_routing;
+ break;
+ case 4: /* INTD# */
+ int_line = config->pirqd_routing;
+ break;
}
if (!int_line)
@@ -133,336 +139,26 @@ static void pch_pirq_init(device_t dev)
}
}
-static void pch_power_options(device_t dev)
-{
- u16 reg16;
- const char *state;
- /* Get the chip configuration */
- config_t *config = dev->chip_info;
- int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
-
- /* Which state do we want to goto after g3 (power restored)?
- * 0 == S0 Full On
- * 1 == S5 Soft Off
- *
- * If the option is not existent (Laptops), use Kconfig setting.
- */
- get_option(&pwr_on, "power_on_after_fail");
-
- reg16 = pci_read_config16(dev, GEN_PMCON_3);
- reg16 &= 0xfffe;
- switch (pwr_on) {
- case MAINBOARD_POWER_OFF:
- reg16 |= 1;
- state = "off";
- break;
- case MAINBOARD_POWER_ON:
- reg16 &= ~1;
- state = "on";
- break;
- case MAINBOARD_POWER_KEEP:
- reg16 &= ~1;
- state = "state keep";
- break;
- default:
- state = "undefined";
- }
- pci_write_config16(dev, GEN_PMCON_3, reg16);
- printk(BIOS_INFO, "Set power %s after power failure.\n", state);
-
- /* GPE setup based on device tree configuration */
- enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2,
- config->gpe0_en_3, config->gpe0_en_4);
-
- /* SMI setup based on device tree configuration */
- enable_alt_smi(config->alt_gp_smi_en);
-}
-
-#if IS_ENABLED(CONFIG_CHROMEOS) && IS_ENABLED(CONFIG_CHROMEOS_VBNV_CMOS)
-/*
- * Preserve Vboot NV data when clearing CMOS as it will
- * have been re-initialized already by Vboot firmware init.
- */
-static void pch_cmos_init_preserve(int reset)
-{
- uint8_t vbnv[CONFIG_VBNV_SIZE];
-
- if (reset)
- read_vbnv(vbnv);
-
- cmos_init(reset);
-
- if (reset)
- save_vbnv(vbnv);
-}
-#endif
-
-static void pch_rtc_init(struct device *dev)
-{
- u8 reg8;
- int rtc_failed;
-
- reg8 = pci_read_config8(dev, GEN_PMCON_3);
- rtc_failed = reg8 & RTC_BATTERY_DEAD;
- if (rtc_failed) {
- reg8 &= ~RTC_BATTERY_DEAD;
- pci_write_config8(dev, GEN_PMCON_3, reg8);
- printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed);
- }
-
-#if IS_ENABLED(CONFIG_CHROMEOS) && IS_ENABLED(CONFIG_CHROMEOS_VBNV_CMOS)
- pch_cmos_init_preserve(rtc_failed);
-#else
- cmos_init(rtc_failed);
-#endif
-}
static const struct reg_script pch_misc_init_script[] = {
- /* Setup SLP signal assertion, SLP_S4=4s, SLP_S3=50ms */
- REG_PCI_RMW16(GEN_PMCON_3, ~((3 << 4)|(1 << 10)),
- (1 << 3)|(1 << 11)|(1 << 12)),
- /* Prepare sleep mode */
- REG_IO_RMW32(ACPI_BASE_ADDRESS + PM1_CNT, ~SLP_TYP, SCI_EN),
/* Setup NMI on errors, disable SERR */
REG_IO_RMW8(0x61, ~0xf0, (1 << 2)),
/* Disable NMI sources */
REG_IO_OR8(0x70, (1 << 7)),
- /* Indicate DRAM init done for MRC */
- REG_PCI_OR8(GEN_PMCON_2, (1 << 7)),
/* Enable BIOS updates outside of SMM */
REG_PCI_RMW8(0xdc, ~(1 << 5), 0),
- /* Clear status bits to prevent unexpected wake */
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x3310, 0x0000002f),
- REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x3f02, ~0x0000000f, 0),
- /* Enable PCIe Releaxed Order */
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x2314, (1 << 31) | (1 << 7)),
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x1114, (1 << 15) | (1 << 14)),
/* Setup SERIRQ, enable continuous mode */
REG_PCI_OR8(SERIRQ_CNTL, (1 << 7) | (1 << 6)),
-#if !CONFIG_SERIRQ_CONTINUOUS_MODE
+#if !IS_ENABLED(CONFIG_SERIRQ_CONTINUOUS_MODE)
REG_PCI_RMW8(SERIRQ_CNTL, ~(1 << 6), 0),
#endif
REG_SCRIPT_END
};
-/* Magic register settings for power management */
-static const struct reg_script pch_pm_init_script[] = {
- REG_PCI_WRITE8(0xa9, 0x46),
- REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x232c, ~1, 0),
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x1100, 0x0000c13f),
- REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x2320, ~0x60, 0x10),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3314, 0x00012fff),
- REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x3318, ~0x000f0330, 0x0dcf0400),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3324, 0x04000000),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3368, 0x00041400),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3388, 0x3f8ddbff),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33ac, 0x00007001),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33b0, 0x00181900),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33c0, 0x00060A00),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33d0, 0x06200840),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a28, 0x01010101),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a2c, 0x040c0404),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a9c, 0x9000000a),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b1c, 0x03808033),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b34, 0x80000009),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3348, 0x022ddfff),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x334c, 0x00000001),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3358, 0x0001c000),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3380, 0x3f8ddbff),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3384, 0x0001c7e1),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x338c, 0x0001c7e1),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3398, 0x0001c000),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33a8, 0x00181900),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33dc, 0x00080000),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33e0, 0x00000001),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a20, 0x0000040c),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a24, 0x01010101),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a30, 0x01010101),
- REG_PCI_RMW32(0xac, ~0x00200000, 0),
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x0410, 0x00000003),
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x2618, 0x08000000),
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x2300, 0x00000002),
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x2600, 0x00000008),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33b4, 0x00007001),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3350, 0x022ddfff),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3354, 0x00000001),
- /* Power Optimizer */
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x33d4, 0x08000000),
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x33c8, 0x08000080),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b10, 0x0000883c),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b14, 0x1e0a4616),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b24, 0x40000005),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b20, 0x0005db01),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a80, 0x05145005),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a84, 0x00001005),
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x33d4, 0x2fff2fb1),
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x33c8, 0x00008000),
- REG_SCRIPT_END
-};
-
-static void pch_enable_mphy(void)
-{
- u32 gpio71_native = gpio_is_native(71);
- u32 data_and = 0xffffffff;
- u32 data_or = (1 << 14) | (1 << 13) | (1 << 12);
-
- if (gpio71_native) {
- data_or |= (1 << 0);
- if (pch_is_wpt()) {
- data_and &= ~((1 << 7) | (1 << 6) | (1 << 3));
- data_or |= (1 << 5) | (1 << 4);
-
- if (pch_is_wpt_ulx()) {
- /* Check if SATA and USB3 MPHY are enabled */
- u32 strap19 = pch_read_soft_strap(19);
- strap19 &= ((1 << 31) | (1 << 30));
- strap19 >>= 30;
- if (strap19 == 3) {
- data_or |= (1 << 3);
- printk(BIOS_DEBUG, "Enable ULX MPHY PG "
- "control in single domain\n");
- } else if (strap19 == 0) {
- printk(BIOS_DEBUG, "Enable ULX MPHY PG "
- "control in split domains\n");
- } else {
- printk(BIOS_DEBUG, "Invalid PCH Soft "
- "Strap 19 configuration\n");
- }
- } else {
- data_or |= (1 << 3);
- }
- }
- }
-
- pch_iobp_update(0xCF000000, data_and, data_or);
-}
-
-static void pch_init_deep_sx(struct device *dev)
-{
- config_t *config = dev->chip_info;
-
- if (config->deep_sx_enable_ac) {
- RCBA32_OR(DEEP_S3_POL, DEEP_S3_EN_AC);
- RCBA32_OR(DEEP_S5_POL, DEEP_S5_EN_AC);
- }
-
- if (config->deep_sx_enable_dc) {
- RCBA32_OR(DEEP_S3_POL, DEEP_S3_EN_DC);
- RCBA32_OR(DEEP_S5_POL, DEEP_S5_EN_DC);
- }
-
- if (config->deep_sx_enable_ac || config->deep_sx_enable_dc)
- RCBA32_OR(DEEP_SX_CONFIG,
- DEEP_SX_WAKE_PIN_EN | DEEP_SX_GP27_PIN_EN);
-}
-
-/* Power Management init */
-static void pch_pm_init(struct device *dev)
-{
- printk(BIOS_DEBUG, "PCH PM init\n");
-
- pch_init_deep_sx(dev);
-
- pch_enable_mphy();
-
- reg_script_run_on_dev(dev, pch_pm_init_script);
-
- if (pch_is_wpt()) {
- RCBA32_OR(0x33e0, (1 << 4) | (1 << 1));
- RCBA32_OR(0x2b1c, (1 << 22) | (1 << 14) | (1 << 13));
- RCBA32(0x33e4) = 0x16bf0002;
- RCBA32_OR(0x33e4, 0x1);
- }
-
- pch_iobp_update(0xCA000000, ~0UL, 0x00000009);
-
- /* Set RCBA 0x2b1c[29]=1 if DSP disabled */
- if (RCBA32(FD) & PCH_DISABLE_ADSPD)
- RCBA32_OR(0x2b1c, (1 << 29));
-
-}
-
-static void pch_cg_init(device_t dev)
-{
- u32 reg32;
- u16 reg16;
-
- /* DMI */
- RCBA32_OR(0x2234, 0xf);
-
- reg16 = pci_read_config16(dev, GEN_PMCON_1);
- reg16 &= ~(1 << 10); /* Disable BIOS_PCI_EXP_EN for native PME */
- if (pch_is_wpt())
- reg16 &= ~(1 << 11);
- else
- reg16 |= (1 << 11);
- reg16 |= (1 << 5) | (1 << 6) | (1 << 7) | (1 << 12);
- reg16 |= (1 << 2); // PCI CLKRUN# Enable
- pci_write_config16(dev, GEN_PMCON_1, reg16);
-
- /*
- * RCBA + 0x2614[27:25,14:13,10,8] = 101,11,1,1
- * RCBA + 0x2614[23:16] = 0x20
- * RCBA + 0x2614[30:28] = 0x0
- * RCBA + 0x2614[26] = 1 (IF 0:2.0@0x08 >= 0x0b)
- */
- RCBA32_AND_OR(0x2614, ~0x64ff0000, 0x0a206500);
-
- /* Check for 0:2.0@0x08 >= 0x0b */
- if (pch_is_wpt() || pci_read_config8(SA_DEV_IGD, 0x8) >= 0x0b)
- RCBA32_OR(0x2614, (1 << 26));
-
- RCBA32_OR(0x900, 0x0000031f);
-
- reg32 = RCBA32(CG);
- if (RCBA32(0x3454) & (1 << 4))
- reg32 &= ~(1 << 29); // LPC Dynamic
- else
- reg32 |= (1 << 29); // LPC Dynamic
- reg32 |= (1 << 31); // LP LPC
- reg32 |= (1 << 30); // LP BLA
- if (RCBA32(0x3454) & (1 << 4))
- reg32 &= ~(1 << 29);
- else
- reg32 |= (1 << 29);
- reg32 |= (1 << 28); // GPIO Dynamic
- reg32 |= (1 << 27); // HPET Dynamic
- reg32 |= (1 << 26); // Generic Platform Event Clock
- if (RCBA32(BUC) & PCH_DISABLE_GBE)
- reg32 |= (1 << 23); // GbE Static
- if (RCBA32(FD) & PCH_DISABLE_HD_AUDIO)
- reg32 |= (1 << 21); // HDA Static
- reg32 |= (1 << 22); // HDA Dynamic
- RCBA32(CG) = reg32;
-
- /* PCH-LP LPC */
- if (pch_is_wpt())
- RCBA32_AND_OR(0x3434, ~0x1f, 0x17);
- else
- RCBA32_OR(0x3434, 0x7);
-
- /* SPI */
- RCBA32_OR(0x38c0, 0x3c07);
-
- pch_iobp_update(0xCE00C000, ~1UL, 0x00000000);
-}
-
-static void pch_set_acpi_mode(void)
-{
-#if CONFIG_HAVE_SMI_HANDLER
- if (!acpi_is_wakeup_s3()) {
- printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n");
- outb(APM_CNT_ACPI_DISABLE, APM_CNT);
- printk(BIOS_DEBUG, "done.\n");
- }
-#endif /* CONFIG_HAVE_SMI_HANDLER */
-}
-
static void lpc_init(struct device *dev)
{
/* Legacy initialization */
isa_dma_init();
- pch_rtc_init(dev);
reg_script_run_on_dev(dev, pch_misc_init_script);
/* Interrupt configuration */
@@ -470,39 +166,25 @@ static void lpc_init(struct device *dev)
pch_pirq_init(dev);
setup_i8259();
i8259_configure_irq_trigger(9, 1);
-
- /* Initialize power management */
- pch_power_options(dev);
- pch_pm_init(dev);
- pch_cg_init(dev);
-
- pch_set_acpi_mode();
}
static void pch_lpc_add_mmio_resources(device_t dev)
{
u32 reg;
struct resource *res;
- const u32 default_decode_base = IO_APIC_ADDR;
-
/*
- * Just report all resources from IO-APIC base to 4GiB. Don't mark
- * them reserved as that may upset the OS if this range is marked
- * as reserved in the e820.
+ * As per the BWG, Chapter 5.9.1. "PCH BIOS component will reserve
+ * certain memory range as reserved range for BIOS usage.
+ * For this SOC, the range will be from 0FD000000h till FE7FFFFFh"
+ * Hence, use FD000000h as PCR_BASE
*/
- res = new_resource(dev, OIC);
+ const u32 default_decode_base = PCH_PCR_BASE_ADDRESS;
+
+ res = new_resource(dev, PCI_BASE_ADDRESS_0);
res->base = default_decode_base;
res->size = 0 - default_decode_base;
- res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
-
- /* RCBA */
- if (RCBA_BASE_ADDRESS < default_decode_base) {
- res = new_resource(dev, RCBA);
- res->base = RCBA_BASE_ADDRESS;
- res->size = 16 * 1024;
- res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED |
- IORESOURCE_FIXED | IORESOURCE_RESERVE;
- }
+ res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED |
+ IORESOURCE_FIXED | IORESOURCE_RESERVE;
/* Check LPC Memory Decode register. */
reg = pci_read_config32(dev, LGMR);
@@ -513,7 +195,7 @@ static void pch_lpc_add_mmio_resources(device_t dev)
res->base = reg;
res->size = 16 * 1024;
res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED |
- IORESOURCE_FIXED | IORESOURCE_RESERVE;
+ IORESOURCE_FIXED | IORESOURCE_RESERVE;
}
}
}
@@ -558,7 +240,7 @@ static void pch_lpc_add_gen_io_resources(device_t dev, int reg_value, int index)
{
/*
* Check if the register is enabled. If so and the base exceeds the
- * device's default claim range add the resource.
+ * device's deafult claim range add the resoure.
*/
if (reg_value & 1) {
u16 base = reg_value & 0xfffc;
@@ -578,13 +260,6 @@ static void pch_lpc_add_io_resources(device_t dev)
res->size = LPC_DEFAULT_IO_RANGE_UPPER - LPC_DEFAULT_IO_RANGE_LOWER;
res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
- /* GPIOBASE */
- pch_lpc_add_io_resource(dev, GPIO_BASE_ADDRESS,
- GPIO_BASE_SIZE, GPIO_BASE);
-
- /* PMBASE */
- pch_lpc_add_io_resource(dev, ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, PMBASE);
-
/* LPC Generic IO Decode range. */
pch_lpc_add_gen_io_resources(dev, config->gen1_dec, LPC_GEN1_DEC);
pch_lpc_add_gen_io_resources(dev, config->gen2_dec, LPC_GEN2_DEC);
@@ -611,55 +286,22 @@ static void pch_lpc_read_resources(device_t dev)
memset(gnvs, 0, sizeof(global_nvs_t));
}
-static void southcluster_inject_dsdt(void)
-{
- global_nvs_t *gnvs;
-
- gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS);
- if (!gnvs) {
- gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof (*gnvs));
- if (gnvs)
- memset(gnvs, 0, sizeof(*gnvs));
- }
-
- if (gnvs) {
- memset(gnvs, 0, sizeof(*gnvs));
- acpi_create_gnvs(gnvs);
- acpi_save_gnvs((unsigned long)gnvs);
- /* And tell SMI about it */
- smm_setup_structures(gnvs, NULL, NULL);
-
- /* Add it to DSDT. */
- acpigen_write_scope("\\");
- acpigen_write_name_dword("NVSA", (u32) gnvs);
- acpigen_pop_len();
- }
-}
-
static struct device_operations device_ops = {
.read_resources = &pch_lpc_read_resources,
.set_resources = &pci_dev_set_resources,
.enable_resources = &pci_dev_enable_resources,
.acpi_inject_dsdt_generator = southcluster_inject_dsdt,
- .write_acpi_tables = acpi_write_hpet,
+ .write_acpi_tables = southcluster_write_acpi_tables,
.init = &lpc_init,
- .scan_bus = &scan_static_bus,
- .ops_pci = &broadwell_pci_ops,
+ .scan_bus = &scan_lpc_bus,
+ .ops_pci = &soc_pci_ops,
};
static const unsigned short pci_device_ids[] = {
- PCH_LPT_LP_SAMPLE,
- PCH_LPT_LP_PREMIUM,
- PCH_LPT_LP_MAINSTREAM,
- PCH_LPT_LP_VALUE,
- PCH_WPT_HSW_U_SAMPLE,
- PCH_WPT_BDW_U_SAMPLE,
- PCH_WPT_BDW_U_PREMIUM,
- PCH_WPT_BDW_U_BASE,
- PCH_WPT_BDW_Y_SAMPLE,
- PCH_WPT_BDW_Y_PREMIUM,
- PCH_WPT_BDW_Y_BASE,
- PCH_WPT_BDW_H,
+ PCH_SPT_LP_SAMPLE,
+ PCH_SPT_LP_U_BASE,
+ PCH_SPT_LP_U_PREMIUM,
+ PCH_SPT_LP_Y_PREMIUM,
0
};
diff --git a/src/soc/intel/skylake/me.c b/src/soc/intel/skylake/me.c
deleted file mode 100644
index 3cac120ecb..0000000000
--- a/src/soc/intel/skylake/me.c
+++ /dev/null
@@ -1,1085 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
- * This is a ramstage driver for the Intel Management Engine found in the
- * southbridge. It handles the required boot-time messages over the
- * MMIO-based Management Engine Interface to tell the ME that the BIOS is
- * finished with POST. Additional messages are defined for debug but are
- * not used unless the console loglevel is high enough.
- */
-
-#include <arch/acpi.h>
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_def.h>
-#include <string.h>
-#include <delay.h>
-#include <elog.h>
-#include <soc/me.h>
-#include <soc/lpc.h>
-#include <soc/pch.h>
-#include <soc/pci_devs.h>
-#include <soc/ramstage.h>
-#include <soc/rcba.h>
-#include <soc/intel/broadwell/chip.h>
-
-#if CONFIG_CHROMEOS
-#include <vendorcode/google/chromeos/chromeos.h>
-#include <vendorcode/google/chromeos/gnvs.h>
-#endif
-
-/* Path that the BIOS should take based on ME state */
-static const char *me_bios_path_values[] = {
- [ME_NORMAL_BIOS_PATH] = "Normal",
- [ME_S3WAKE_BIOS_PATH] = "S3 Wake",
- [ME_ERROR_BIOS_PATH] = "Error",
- [ME_RECOVERY_BIOS_PATH] = "Recovery",
- [ME_DISABLE_BIOS_PATH] = "Disable",
- [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update",
-};
-
-/* MMIO base address for MEI interface */
-static u8 *mei_base_address;
-
-#if CONFIG_DEBUG_INTEL_ME
-static void mei_dump(void *ptr, int dword, int offset, const char *type)
-{
- struct mei_csr *csr;
-
- printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset);
-
- switch (offset) {
- case MEI_H_CSR:
- case MEI_ME_CSR_HA:
- csr = ptr;
- if (!csr) {
- printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword);
- break;
- }
- printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u "
- "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth,
- csr->buffer_read_ptr, csr->buffer_write_ptr,
- csr->ready, csr->reset, csr->interrupt_generate,
- csr->interrupt_status, csr->interrupt_enable);
- break;
- case MEI_ME_CB_RW:
- case MEI_H_CB_WW:
- printk(BIOS_SPEW, "CB: 0x%08x\n", dword);
- break;
- default:
- printk(BIOS_SPEW, "0x%08x\n", offset);
- break;
- }
-}
-#else
-# define mei_dump(ptr,dword,offset,type) do {} while (0)
-#endif
-
-/*
- * ME/MEI access helpers using memcpy to avoid aliasing.
- */
-
-static inline void mei_read_dword_ptr(void *ptr, int offset)
-{
- u32 dword = read32(mei_base_address + offset);
- memcpy(ptr, &dword, sizeof(dword));
- mei_dump(ptr, dword, offset, "READ");
-}
-
-static inline void mei_write_dword_ptr(void *ptr, int offset)
-{
- u32 dword = 0;
- memcpy(&dword, ptr, sizeof(dword));
- write32(mei_base_address + offset, dword);
- mei_dump(ptr, dword, offset, "WRITE");
-}
-
-static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset)
-{
- u32 dword = pci_read_config32(dev, offset);
- memcpy(ptr, &dword, sizeof(dword));
- mei_dump(ptr, dword, offset, "PCI READ");
-}
-
-static inline void read_host_csr(struct mei_csr *csr)
-{
- mei_read_dword_ptr(csr, MEI_H_CSR);
-}
-
-static inline void write_host_csr(struct mei_csr *csr)
-{
- mei_write_dword_ptr(csr, MEI_H_CSR);
-}
-
-static inline void read_me_csr(struct mei_csr *csr)
-{
- mei_read_dword_ptr(csr, MEI_ME_CSR_HA);
-}
-
-static inline void write_cb(u32 dword)
-{
- write32(mei_base_address + MEI_H_CB_WW, dword);
- mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE");
-}
-
-static inline u32 read_cb(void)
-{
- u32 dword = read32(mei_base_address + MEI_ME_CB_RW);
- mei_dump(NULL, dword, MEI_ME_CB_RW, "READ");
- return dword;
-}
-
-/* Wait for ME ready bit to be asserted */
-static int mei_wait_for_me_ready(void)
-{
- struct mei_csr me;
- unsigned try = ME_RETRY;
-
- while (try--) {
- read_me_csr(&me);
- if (me.ready)
- return 0;
- udelay(ME_DELAY);
- }
-
- printk(BIOS_ERR, "ME: failed to become ready\n");
- return -1;
-}
-
-static void mei_reset(void)
-{
- struct mei_csr host;
-
- if (mei_wait_for_me_ready() < 0)
- return;
-
- /* Reset host and ME circular buffers for next message */
- read_host_csr(&host);
- host.reset = 1;
- host.interrupt_generate = 1;
- write_host_csr(&host);
-
- if (mei_wait_for_me_ready() < 0)
- return;
-
- /* Re-init and indicate host is ready */
- read_host_csr(&host);
- host.interrupt_generate = 1;
- host.ready = 1;
- host.reset = 0;
- write_host_csr(&host);
-}
-
-static int mei_send_packet(struct mei_header *mei, void *req_data)
-{
- struct mei_csr host;
- unsigned ndata, n;
- u32 *data;
-
- /* Number of dwords to write */
- ndata = mei->length >> 2;
-
- /* Pad non-dword aligned request message length */
- if (mei->length & 3)
- ndata++;
- if (!ndata) {
- printk(BIOS_DEBUG, "ME: request has no data\n");
- return -1;
- }
- ndata++; /* Add MEI header */
-
- /*
- * Make sure there is still room left in the circular buffer.
- * Reset the buffer pointers if the requested message will not fit.
- */
- read_host_csr(&host);
- if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
- printk(BIOS_ERR, "ME: circular buffer full, resetting...\n");
- mei_reset();
- read_host_csr(&host);
- }
-
- /* Ensure the requested length will fit in the circular buffer. */
- if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
- printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n",
- ndata + 2, host.buffer_depth);
- return -1;
- }
-
- /* Write MEI header */
- mei_write_dword_ptr(mei, MEI_H_CB_WW);
- ndata--;
-
- /* Write message data */
- data = req_data;
- for (n = 0; n < ndata; ++n)
- write_cb(*data++);
-
- /* Generate interrupt to the ME */
- read_host_csr(&host);
- host.interrupt_generate = 1;
- write_host_csr(&host);
-
- /* Make sure ME is ready after sending request data */
- return mei_wait_for_me_ready();
-}
-
-static int mei_send_data(u8 me_address, u8 host_address,
- void *req_data, int req_bytes)
-{
- struct mei_header header = {
- .client_address = me_address,
- .host_address = host_address,
- };
- struct mei_csr host;
- int current = 0;
- u8 *req_ptr = req_data;
-
- while (!header.is_complete) {
- int remain = req_bytes - current;
- int buf_len;
-
- read_host_csr(&host);
- buf_len = host.buffer_depth - host.buffer_write_ptr;
-
- if (buf_len > remain) {
- /* Send all remaining data as final message */
- header.length = req_bytes - current;
- header.is_complete = 1;
- } else {
- /* Send as much data as the buffer can hold */
- header.length = buf_len;
- }
-
- mei_send_packet(&header, req_ptr);
-
- req_ptr += header.length;
- current += header.length;
- }
-
- return 0;
-}
-
-static int mei_send_header(u8 me_address, u8 host_address,
- void *header, int header_len, int complete)
-{
- struct mei_header mei = {
- .client_address = me_address,
- .host_address = host_address,
- .length = header_len,
- .is_complete = complete,
- };
- return mei_send_packet(&mei, header);
-}
-
-static int mei_recv_msg(void *header, int header_bytes,
- void *rsp_data, int rsp_bytes)
-{
- struct mei_header mei_rsp;
- struct mei_csr me, host;
- unsigned ndata, n;
- unsigned expected;
- u32 *data;
-
- /* Total number of dwords to read from circular buffer */
- expected = (rsp_bytes + sizeof(mei_rsp) + header_bytes) >> 2;
- if (rsp_bytes & 3)
- expected++;
-
- if (mei_wait_for_me_ready() < 0)
- return -1;
-
- /*
- * The interrupt status bit does not appear to indicate that the
- * message has actually been received. Instead we wait until the
- * expected number of dwords are present in the circular buffer.
- */
- for (n = ME_RETRY; n; --n) {
- read_me_csr(&me);
- if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected)
- break;
- udelay(ME_DELAY);
- }
- if (!n) {
- printk(BIOS_ERR, "ME: timeout waiting for data: expected "
- "%u, available %u\n", expected,
- me.buffer_write_ptr - me.buffer_read_ptr);
- return -1;
- }
-
- /* Read and verify MEI response header from the ME */
- mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW);
- if (!mei_rsp.is_complete) {
- printk(BIOS_ERR, "ME: response is not complete\n");
- return -1;
- }
-
- /* Handle non-dword responses and expect at least the header */
- ndata = mei_rsp.length >> 2;
- if (mei_rsp.length & 3)
- ndata++;
- if (ndata != (expected - 1)) {
- printk(BIOS_ERR, "ME: response is missing data %d != %d\n",
- ndata, (expected - 1));
- return -1;
- }
-
- /* Read response header from the ME */
- data = header;
- for (n = 0; n < (header_bytes >> 2); ++n)
- *data++ = read_cb();
- ndata -= header_bytes >> 2;
-
- /* Make sure caller passed a buffer with enough space */
- if (ndata != (rsp_bytes >> 2)) {
- printk(BIOS_ERR, "ME: not enough room in response buffer: "
- "%u != %u\n", ndata, rsp_bytes >> 2);
- return -1;
- }
-
- /* Read response data from the circular buffer */
- data = rsp_data;
- for (n = 0; n < ndata; ++n)
- *data++ = read_cb();
-
- /* Tell the ME that we have consumed the response */
- read_host_csr(&host);
- host.interrupt_status = 1;
- host.interrupt_generate = 1;
- write_host_csr(&host);
-
- return mei_wait_for_me_ready();
-}
-
-static inline int mei_sendrecv_mkhi(struct mkhi_header *mkhi,
- void *req_data, int req_bytes,
- void *rsp_data, int rsp_bytes)
-{
- struct mkhi_header mkhi_rsp;
-
- /* Send header */
- if (mei_send_header(MEI_ADDRESS_MKHI, MEI_HOST_ADDRESS,
- mkhi, sizeof(*mkhi), req_bytes ? 0 : 1) < 0)
- return -1;
-
- /* Send data if available */
- if (req_bytes && mei_send_data(MEI_ADDRESS_MKHI, MEI_HOST_ADDRESS,
- req_data, req_bytes) < 0)
- return -1;
-
- /* Return now if no response expected */
- if (!rsp_bytes)
- return 0;
-
- /* Read header and data */
- if (mei_recv_msg(&mkhi_rsp, sizeof(mkhi_rsp),
- rsp_data, rsp_bytes) < 0)
- return -1;
-
- if (!mkhi_rsp.is_response ||
- mkhi->group_id != mkhi_rsp.group_id ||
- mkhi->command != mkhi_rsp.command) {
- printk(BIOS_ERR, "ME: invalid response, group %u ?= %u,"
- "command %u ?= %u, is_response %u\n", mkhi->group_id,
- mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command,
- mkhi_rsp.is_response);
- return -1;
- }
-
- return 0;
-}
-
-static inline int mei_sendrecv_icc(struct icc_header *icc,
- void *req_data, int req_bytes,
- void *rsp_data, int rsp_bytes)
-{
- struct icc_header icc_rsp;
-
- /* Send header */
- if (mei_send_header(MEI_ADDRESS_ICC, MEI_HOST_ADDRESS,
- icc, sizeof(*icc), req_bytes ? 0 : 1) < 0)
- return -1;
-
- /* Send data if available */
- if (req_bytes && mei_send_data(MEI_ADDRESS_ICC, MEI_HOST_ADDRESS,
- req_data, req_bytes) < 0)
- return -1;
-
- /* Read header and data, if needed */
- if (rsp_bytes && mei_recv_msg(&icc_rsp, sizeof(icc_rsp),
- rsp_data, rsp_bytes) < 0)
- return -1;
-
- return 0;
-}
-
-/*
- * mbp give up routine. This path is taken if hfs.mpb_rdy is 0 or the read
- * state machine on the BIOS end doesn't match the ME's state machine.
- */
-static void intel_me_mbp_give_up(device_t dev)
-{
- struct mei_csr csr;
-
- pci_write_config32(dev, PCI_ME_H_GS2, PCI_ME_MBP_GIVE_UP);
-
- read_host_csr(&csr);
- csr.reset = 1;
- csr.interrupt_generate = 1;
- write_host_csr(&csr);
-}
-
-/*
- * mbp clear routine. This will wait for the ME to indicate that
- * the MBP has been read and cleared.
- */
-static void intel_me_mbp_clear(device_t dev)
-{
- int count;
- struct me_hfs2 hfs2;
-
- /* Wait for the mbp_cleared indicator */
- for (count = ME_RETRY; count > 0; --count) {
- pci_read_dword_ptr(dev, &hfs2, PCI_ME_HFS2);
- if (hfs2.mbp_cleared)
- break;
- udelay(ME_DELAY);
- }
-
- if (count == 0) {
- printk(BIOS_WARNING, "ME: Timeout waiting for mbp_cleared\n");
- intel_me_mbp_give_up(dev);
- } else {
- printk(BIOS_INFO, "ME: MBP cleared\n");
- }
-}
-
-static void me_print_fw_version(mbp_fw_version_name *vers_name)
-{
- if (!vers_name) {
- printk(BIOS_ERR, "ME: mbp missing version report\n");
- return;
- }
-
- printk(BIOS_DEBUG, "ME: found version %d.%d.%d.%d\n",
- vers_name->major_version, vers_name->minor_version,
- vers_name->hotfix_version, vers_name->build_version);
-}
-
-#if CONFIG_DEBUG_INTEL_ME
-static inline void print_cap(const char *name, int state)
-{
- printk(BIOS_DEBUG, "ME Capability: %-41s : %sabled\n",
- name, state ? " en" : "dis");
-}
-
-/* Get ME Firmware Capabilities */
-static int mkhi_get_fwcaps(mbp_mefwcaps *cap)
-{
- u32 rule_id = 0;
- struct me_fwcaps cap_msg;
- struct mkhi_header mkhi = {
- .group_id = MKHI_GROUP_ID_FWCAPS,
- .command = MKHI_FWCAPS_GET_RULE,
- };
-
- /* Send request and wait for response */
- if (mei_sendrecv_mkhi(&mkhi, &rule_id, sizeof(u32),
- &cap_msg, sizeof(cap_msg)) < 0) {
- printk(BIOS_ERR, "ME: GET FWCAPS message failed\n");
- return -1;
- }
- *cap = cap_msg.caps_sku;
- return 0;
-}
-
-/* Get ME Firmware Capabilities */
-static void me_print_fwcaps(mbp_mefwcaps *cap)
-{
- mbp_mefwcaps local_caps;
- if (!cap) {
- cap = &local_caps;
- printk(BIOS_ERR, "ME: mbp missing fwcaps report\n");
- if (mkhi_get_fwcaps(cap))
- return;
- }
-
- print_cap("Full Network manageability", cap->full_net);
- print_cap("Regular Network manageability", cap->std_net);
- print_cap("Manageability", cap->manageability);
- print_cap("IntelR Anti-Theft (AT)", cap->intel_at);
- print_cap("IntelR Capability Licensing Service (CLS)", cap->intel_cls);
- print_cap("IntelR Power Sharing Technology (MPC)", cap->intel_mpc);
- print_cap("ICC Over Clocking", cap->icc_over_clocking);
- print_cap("Protected Audio Video Path (PAVP)", cap->pavp);
- print_cap("IPV6", cap->ipv6);
- print_cap("KVM Remote Control (KVM)", cap->kvm);
- print_cap("Outbreak Containment Heuristic (OCH)", cap->och);
- print_cap("Virtual LAN (VLAN)", cap->vlan);
- print_cap("TLS", cap->tls);
- print_cap("Wireless LAN (WLAN)", cap->wlan);
-}
-#endif
-
-/* Send END OF POST message to the ME */
-static int mkhi_end_of_post(void)
-{
- struct mkhi_header mkhi = {
- .group_id = MKHI_GROUP_ID_GEN,
- .command = MKHI_END_OF_POST,
- };
- u32 eop_ack;
-
- /* Send request and wait for response */
- if (mei_sendrecv_mkhi(&mkhi, NULL, 0, &eop_ack, sizeof(eop_ack)) < 0) {
- printk(BIOS_ERR, "ME: END OF POST message failed\n");
- return -1;
- }
-
- printk(BIOS_INFO, "ME: END OF POST message successful (%d)\n", eop_ack);
- return 0;
-}
-
-/* Send END OF POST message to the ME */
-static int mkhi_end_of_post_noack(void)
-{
- struct mkhi_header mkhi = {
- .group_id = MKHI_GROUP_ID_GEN,
- .command = MKHI_END_OF_POST_NOACK,
- };
-
- /* Send request, do not wait for response */
- if (mei_sendrecv_mkhi(&mkhi, NULL, 0, NULL, 0) < 0) {
- printk(BIOS_ERR, "ME: END OF POST NOACK message failed\n");
- return -1;
- }
-
- printk(BIOS_INFO, "ME: END OF POST NOACK message successful\n");
- return 0;
-}
-
-/* Send HMRFPO LOCK message to the ME */
-static int mkhi_hmrfpo_lock(void)
-{
- struct mkhi_header mkhi = {
- .group_id = MKHI_GROUP_ID_HMRFPO,
- .command = MKHI_HMRFPO_LOCK,
- };
- u32 ack;
-
- /* Send request and wait for response */
- if (mei_sendrecv_mkhi(&mkhi, NULL, 0, &ack, sizeof(ack)) < 0) {
- printk(BIOS_ERR, "ME: HMRFPO LOCK message failed\n");
- return -1;
- }
-
- printk(BIOS_INFO, "ME: HMRPFO LOCK message successful (%d)\n", ack);
- return 0;
-}
-
-/* Send HMRFPO LOCK message to the ME, do not wait for response */
-static int mkhi_hmrfpo_lock_noack(void)
-{
- struct mkhi_header mkhi = {
- .group_id = MKHI_GROUP_ID_HMRFPO,
- .command = MKHI_HMRFPO_LOCK_NOACK,
- };
-
- /* Send request, do not wait for response */
- if (mei_sendrecv_mkhi(&mkhi, NULL, 0, NULL, 0) < 0) {
- printk(BIOS_ERR, "ME: HMRFPO LOCK NOACK message failed\n");
- return -1;
- }
-
- printk(BIOS_INFO, "ME: HMRPFO LOCK NOACK message successful\n");
- return 0;
-}
-
-static void intel_me_finalize(device_t dev)
-{
- u32 reg32;
-
- /* S3 path will have hidden this device already */
- if (!mei_base_address || mei_base_address == (u8*) 0xfffffff0)
- return;
-
- /* Make sure IO is disabled */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 &= ~(PCI_COMMAND_MASTER |
- PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
- pci_write_config32(dev, PCI_COMMAND, reg32);
-
- /* Hide the PCI device */
- RCBA32_OR(FD2, PCH_DISABLE_MEI1);
- RCBA32(FD2);
-}
-
-static int me_icc_set_clock_enables(u32 mask)
-{
- struct icc_clock_enables_msg clk = {
- .clock_enables = 0, /* Turn off specified clocks */
- .clock_mask = mask,
- .no_response = 1, /* Do not expect response */
- };
- struct icc_header icc = {
- .api_version = ICC_API_VERSION_LYNXPOINT,
- .icc_command = ICC_SET_CLOCK_ENABLES,
- .length = sizeof(clk),
- };
-
- /* Send request and wait for response */
- if (mei_sendrecv_icc(&icc, &clk, sizeof(clk), NULL, 0) < 0) {
- printk(BIOS_ERR, "ME: ICC SET CLOCK ENABLES message failed\n");
- return -1;
- } else {
- printk(BIOS_INFO, "ME: ICC SET CLOCK ENABLES 0x%08x\n", mask);
- }
-
- return 0;
-}
-
-/* Determine the path that we should take based on ME status */
-static me_bios_path intel_me_path(device_t dev)
-{
- me_bios_path path = ME_DISABLE_BIOS_PATH;
- struct me_hfs hfs;
- struct me_hfs2 hfs2;
-
- /* Check and dump status */
- intel_me_status();
-
- pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS);
- pci_read_dword_ptr(dev, &hfs2, PCI_ME_HFS2);
-
- /* Check Current Working State */
- switch (hfs.working_state) {
- case ME_HFS_CWS_NORMAL:
- path = ME_NORMAL_BIOS_PATH;
- break;
- case ME_HFS_CWS_REC:
- path = ME_RECOVERY_BIOS_PATH;
- break;
- default:
- path = ME_DISABLE_BIOS_PATH;
- break;
- }
-
- /* Check Current Operation Mode */
- switch (hfs.operation_mode) {
- case ME_HFS_MODE_NORMAL:
- break;
- case ME_HFS_MODE_DEBUG:
- case ME_HFS_MODE_DIS:
- case ME_HFS_MODE_OVER_JMPR:
- case ME_HFS_MODE_OVER_MEI:
- default:
- path = ME_DISABLE_BIOS_PATH;
- break;
- }
-
- /* Check for any error code and valid firmware and MBP */
- if (hfs.error_code || hfs.fpt_bad)
- path = ME_ERROR_BIOS_PATH;
-
- /* Check if the MBP is ready */
- if (!hfs2.mbp_rdy) {
- printk(BIOS_CRIT, "%s: mbp is not ready!\n",
- __FUNCTION__);
- path = ME_ERROR_BIOS_PATH;
- }
-
-#if CONFIG_ELOG
- if (path != ME_NORMAL_BIOS_PATH) {
- struct elog_event_data_me_extended data = {
- .current_working_state = hfs.working_state,
- .operation_state = hfs.operation_state,
- .operation_mode = hfs.operation_mode,
- .error_code = hfs.error_code,
- .progress_code = hfs2.progress_code,
- .current_pmevent = hfs2.current_pmevent,
- .current_state = hfs2.current_state,
- };
- elog_add_event_byte(ELOG_TYPE_MANAGEMENT_ENGINE, path);
- elog_add_event_raw(ELOG_TYPE_MANAGEMENT_ENGINE_EXT,
- &data, sizeof(data));
- }
-#endif
-
- return path;
-}
-
-/* Prepare ME for MEI messages */
-static int intel_mei_setup(device_t dev)
-{
- struct resource *res;
- struct mei_csr host;
- u32 reg32;
-
- /* Find the MMIO base for the ME interface */
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (!res || res->base == 0 || res->size == 0) {
- printk(BIOS_DEBUG, "ME: MEI resource not present!\n");
- return -1;
- }
- mei_base_address = res2mmio(res, 0, 0);
-
- /* Ensure Memory and Bus Master bits are set */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config32(dev, PCI_COMMAND, reg32);
-
- /* Clean up status for next message */
- read_host_csr(&host);
- host.interrupt_generate = 1;
- host.ready = 1;
- host.reset = 0;
- write_host_csr(&host);
-
- return 0;
-}
-
-/* Read the Extend register hash of ME firmware */
-static int intel_me_extend_valid(device_t dev)
-{
- struct me_heres status;
- u32 extend[8] = {0};
- int i, count = 0;
-
- pci_read_dword_ptr(dev, &status, PCI_ME_HERES);
- if (!status.extend_feature_present) {
- printk(BIOS_ERR, "ME: Extend Feature not present\n");
- return -1;
- }
-
- if (!status.extend_reg_valid) {
- printk(BIOS_ERR, "ME: Extend Register not valid\n");
- return -1;
- }
-
- switch (status.extend_reg_algorithm) {
- case PCI_ME_EXT_SHA1:
- count = 5;
- printk(BIOS_DEBUG, "ME: Extend SHA-1: ");
- break;
- case PCI_ME_EXT_SHA256:
- count = 8;
- printk(BIOS_DEBUG, "ME: Extend SHA-256: ");
- break;
- default:
- printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n",
- status.extend_reg_algorithm);
- return -1;
- }
-
- for (i = 0; i < count; ++i) {
- extend[i] = pci_read_config32(dev, PCI_ME_HER(i));
- printk(BIOS_DEBUG, "%08x", extend[i]);
- }
- printk(BIOS_DEBUG, "\n");
-
-#if CONFIG_CHROMEOS
- /* Save hash in NVS for the OS to verify */
- chromeos_set_me_hash(extend, count);
-#endif
-
- return 0;
-}
-
-static void intel_me_print_mbp(me_bios_payload *mbp_data)
-{
- me_print_fw_version(mbp_data->fw_version_name);
-
-#if CONFIG_DEBUG_INTEL_ME
- me_print_fwcaps(mbp_data->fw_capabilities);
-#endif
-
- if (mbp_data->plat_time) {
- printk(BIOS_DEBUG, "ME: Wake Event to ME Reset: %u ms\n",
- mbp_data->plat_time->wake_event_mrst_time_ms);
- printk(BIOS_DEBUG, "ME: ME Reset to Platform Reset: %u ms\n",
- mbp_data->plat_time->mrst_pltrst_time_ms);
- printk(BIOS_DEBUG, "ME: Platform Reset to CPU Reset: %u ms\n",
- mbp_data->plat_time->pltrst_cpurst_time_ms);
- }
-}
-
-static u32 me_to_host_words_pending(void)
-{
- struct mei_csr me;
- read_me_csr(&me);
- if (!me.ready)
- return 0;
- return (me.buffer_write_ptr - me.buffer_read_ptr) &
- (me.buffer_depth - 1);
-}
-
-struct mbp_payload {
- mbp_header header;
- u32 data[0];
-};
-
-/*
- * Read and print ME MBP data
- *
- * Return -1 to indicate a problem (give up)
- * Return 0 to indicate success (send LOCK+EOP)
- * Return 1 to indicate success (send LOCK+EOP with NOACK)
- */
-static int intel_me_read_mbp(me_bios_payload *mbp_data, device_t dev)
-{
- mbp_header mbp_hdr;
- u32 me2host_pending;
- struct mei_csr host;
- struct me_hfs2 hfs2;
- struct mbp_payload *mbp;
- int i;
- int ret = 0;
-
- pci_read_dword_ptr(dev, &hfs2, PCI_ME_HFS2);
-
- if (!hfs2.mbp_rdy) {
- printk(BIOS_ERR, "ME: MBP not ready\n");
- intel_me_mbp_give_up(dev);
- return -1;
- }
-
- me2host_pending = me_to_host_words_pending();
- if (!me2host_pending) {
- printk(BIOS_ERR, "ME: no mbp data!\n");
- intel_me_mbp_give_up(dev);
- return -1;
- }
-
- /* we know for sure that at least the header is there */
- mei_read_dword_ptr(&mbp_hdr, MEI_ME_CB_RW);
-
- if ((mbp_hdr.num_entries > (mbp_hdr.mbp_size / 2)) ||
- (me2host_pending < mbp_hdr.mbp_size)) {
- printk(BIOS_ERR, "ME: mbp of %d entries, total size %d words"
- " buffer contains %d words\n",
- mbp_hdr.num_entries, mbp_hdr.mbp_size,
- me2host_pending);
- intel_me_mbp_give_up(dev);
- return -1;
- }
- mbp = malloc(mbp_hdr.mbp_size * sizeof(u32));
- if (!mbp) {
- intel_me_mbp_give_up(dev);
- return -1;
- }
-
- mbp->header = mbp_hdr;
- me2host_pending--;
-
- i = 0;
- while (i != me2host_pending) {
- mei_read_dword_ptr(&mbp->data[i], MEI_ME_CB_RW);
- i++;
- }
-
- read_host_csr(&host);
-
- /* Check that read and write pointers are equal. */
- if (host.buffer_read_ptr != host.buffer_write_ptr) {
- printk(BIOS_INFO, "ME: MBP Read/Write pointer mismatch\n");
- printk(BIOS_INFO, "ME: MBP Waiting for MBP cleared flag\n");
-
- /* Tell ME that the host has finished reading the MBP. */
- host.interrupt_generate = 1;
- host.reset = 0;
- write_host_csr(&host);
-
- /* Wait for the mbp_cleared indicator. */
- intel_me_mbp_clear(dev);
- } else {
- /* Indicate NOACK messages should be used. */
- ret = 1;
- }
-
- /* Dump out the MBP contents. */
-#if CONFIG_DEBUG_INTEL_ME
- printk(BIOS_INFO, "ME MBP: Header: items: %d, size dw: %d\n",
- mbp->header.num_entries, mbp->header.mbp_size);
- for (i = 0; i < mbp->header.mbp_size - 1; i++) {
- printk(BIOS_INFO, "ME MBP: %04x: 0x%08x\n", i, mbp->data[i]);
- }
-#endif
-
-#define ASSIGN_FIELD_PTR(field_,val_) \
- { \
- mbp_data->field_ = (typeof(mbp_data->field_))(void *)val_; \
- break; \
- }
-
- /* Setup the pointers in the me_bios_payload structure. */
- for (i = 0; i < mbp->header.mbp_size - 1;) {
- mbp_item_header *item = (void *)&mbp->data[i];
-
- switch(MBP_MAKE_IDENT(item->app_id, item->item_id)) {
- case MBP_IDENT(KERNEL, FW_VER):
- ASSIGN_FIELD_PTR(fw_version_name, &mbp->data[i+1]);
-
- case MBP_IDENT(ICC, PROFILE):
- ASSIGN_FIELD_PTR(icc_profile, &mbp->data[i+1]);
-
- case MBP_IDENT(INTEL_AT, STATE):
- ASSIGN_FIELD_PTR(at_state, &mbp->data[i+1]);
-
- case MBP_IDENT(KERNEL, FW_CAP):
- ASSIGN_FIELD_PTR(fw_capabilities, &mbp->data[i+1]);
-
- case MBP_IDENT(KERNEL, ROM_BIST):
- ASSIGN_FIELD_PTR(rom_bist_data, &mbp->data[i+1]);
-
- case MBP_IDENT(KERNEL, PLAT_KEY):
- ASSIGN_FIELD_PTR(platform_key, &mbp->data[i+1]);
-
- case MBP_IDENT(KERNEL, FW_TYPE):
- ASSIGN_FIELD_PTR(fw_plat_type, &mbp->data[i+1]);
-
- case MBP_IDENT(KERNEL, MFS_FAILURE):
- ASSIGN_FIELD_PTR(mfsintegrity, &mbp->data[i+1]);
-
- case MBP_IDENT(KERNEL, PLAT_TIME):
- ASSIGN_FIELD_PTR(plat_time, &mbp->data[i+1]);
-
- case MBP_IDENT(NFC, SUPPORT_DATA):
- ASSIGN_FIELD_PTR(nfc_data, &mbp->data[i+1]);
- }
- i += item->length;
- }
- #undef ASSIGN_FIELD_PTR
-
- return ret;
-}
-
-/* Check whether ME is present and do basic init */
-static void intel_me_init(device_t dev)
-{
- config_t *config = dev->chip_info;
- me_bios_path path = intel_me_path(dev);
- me_bios_payload mbp_data;
- int mbp_ret;
- struct me_hfs hfs;
- struct mei_csr csr;
-
- /* Do initial setup and determine the BIOS path */
- printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]);
-
- if (path == ME_NORMAL_BIOS_PATH) {
- /* Validate the extend register */
- intel_me_extend_valid(dev);
-}
-
- memset(&mbp_data, 0, sizeof(mbp_data));
-
- /*
- * According to the ME9 BWG, BIOS is required to fetch MBP data in
- * all boot flows except S3 Resume.
- */
-
- /* Prepare MEI MMIO interface */
- if (intel_mei_setup(dev) < 0)
- return;
-
- /* Read ME MBP data */
- mbp_ret = intel_me_read_mbp(&mbp_data, dev);
- if (mbp_ret < 0)
- return;
- intel_me_print_mbp(&mbp_data);
-
- /* Set clock enables according to devicetree */
- if (config && config->icc_clock_disable)
- me_icc_set_clock_enables(config->icc_clock_disable);
-
- /* Make sure ME is in a mode that expects EOP */
- pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS);
-
- /* Abort and leave device alone if not normal mode */
- if (hfs.fpt_bad ||
- hfs.working_state != ME_HFS_CWS_NORMAL ||
- hfs.operation_mode != ME_HFS_MODE_NORMAL)
- return;
-
- if (mbp_ret) {
- /*
- * MBP Cleared wait is skipped,
- * Do not expect ACK and reset when complete.
- */
-
- /* Send HMRFPO Lock command, no response */
- mkhi_hmrfpo_lock_noack();
-
- /* Send END OF POST command, no response */
- mkhi_end_of_post_noack();
-
- /* Assert reset and interrupt */
- read_host_csr(&csr);
- csr.interrupt_generate = 1;
- csr.reset = 1;
- write_host_csr(&csr);
- } else {
- /*
- * MBP Cleared wait was not skipped
- */
-
- /* Send HMRFPO LOCK command */
- mkhi_hmrfpo_lock();
-
- /* Send EOP command so ME stops accepting other commands */
- mkhi_end_of_post();
- }
-}
-
-static void intel_me_enable(device_t dev)
-{
-#if CONFIG_HAVE_ACPI_RESUME
- /* Avoid talking to the device in S3 path */
- if (acpi_slp_type == 3) {
- dev->enabled = 0;
- pch_disable_devfn(dev);
- }
-#endif
-}
-
-static struct device_operations device_ops = {
- .read_resources = &pci_dev_read_resources,
- .set_resources = &pci_dev_set_resources,
- .enable_resources = &pci_dev_enable_resources,
- .enable = &intel_me_enable,
- .init = &intel_me_init,
- .final = &intel_me_finalize,
- .ops_pci = &broadwell_pci_ops,
-};
-
-static const unsigned short pci_device_ids[] = {
- 0x9c3a, /* Low Power */
- 0x9cba, /* WildcatPoint */
- 0
-};
-
-static const struct pci_driver intel_me __pci_driver = {
- .ops = &device_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .devices = pci_device_ids,
-};
diff --git a/src/soc/intel/skylake/me_status.c b/src/soc/intel/skylake/me_status.c
deleted file mode 100644
index 867a9a95d1..0000000000
--- a/src/soc/intel/skylake/me_status.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <stdlib.h>
-#include <string.h>
-#include <soc/pci_devs.h>
-#include <soc/me.h>
-#include <delay.h>
-
-static inline void me_read_dword_ptr(void *ptr, int offset)
-{
- u32 dword = pci_read_config32(PCH_DEV_ME, offset);
- memcpy(ptr, &dword, sizeof(dword));
-}
-
-#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG)
-
-/* HFS1[3:0] Current Working State Values */
-static const char *me_cws_values[] = {
- [ME_HFS_CWS_RESET] = "Reset",
- [ME_HFS_CWS_INIT] = "Initializing",
- [ME_HFS_CWS_REC] = "Recovery",
- [3] = "Unknown (3)",
- [4] = "Unknown (4)",
- [ME_HFS_CWS_NORMAL] = "Normal",
- [ME_HFS_CWS_WAIT] = "Platform Disable Wait",
- [ME_HFS_CWS_TRANS] = "OP State Transition",
- [ME_HFS_CWS_INVALID] = "Invalid CPU Plugged In",
- [9] = "Unknown (9)",
- [10] = "Unknown (10)",
- [11] = "Unknown (11)",
- [12] = "Unknown (12)",
- [13] = "Unknown (13)",
- [14] = "Unknown (14)",
- [15] = "Unknown (15)",
-};
-
-/* HFS1[8:6] Current Operation State Values */
-static const char *me_opstate_values[] = {
- [ME_HFS_STATE_PREBOOT] = "Preboot",
- [ME_HFS_STATE_M0_UMA] = "M0 with UMA",
- [ME_HFS_STATE_M3] = "M3 without UMA",
- [ME_HFS_STATE_M0] = "M0 without UMA",
- [ME_HFS_STATE_BRINGUP] = "Bring up",
- [ME_HFS_STATE_ERROR] = "M0 without UMA but with error"
-};
-
-/* HFS[19:16] Current Operation Mode Values */
-static const char *me_opmode_values[] = {
- [ME_HFS_MODE_NORMAL] = "Normal",
- [ME_HFS_MODE_DEBUG] = "Debug",
- [ME_HFS_MODE_DIS] = "Soft Temporary Disable",
- [ME_HFS_MODE_OVER_JMPR] = "Security Override via Jumper",
- [ME_HFS_MODE_OVER_MEI] = "Security Override via MEI Message"
-};
-
-/* HFS[15:12] Error Code Values */
-static const char *me_error_values[] = {
- [ME_HFS_ERROR_NONE] = "No Error",
- [ME_HFS_ERROR_UNCAT] = "Uncategorized Failure",
- [ME_HFS_ERROR_IMAGE] = "Image Failure",
- [ME_HFS_ERROR_DEBUG] = "Debug Failure"
-};
-
-/* HFS2[31:28] ME Progress Code */
-static const char *me_progress_values[] = {
- [ME_HFS2_PHASE_ROM] = "ROM Phase",
- [ME_HFS2_PHASE_BUP] = "BUP Phase",
- [ME_HFS2_PHASE_UKERNEL] = "uKernel Phase",
- [ME_HFS2_PHASE_POLICY] = "Policy Module",
- [ME_HFS2_PHASE_MODULE_LOAD] = "Module Loading",
- [ME_HFS2_PHASE_UNKNOWN] = "Unknown",
- [ME_HFS2_PHASE_HOST_COMM] = "Host Communication"
-};
-
-/* HFS2[27:24] Power Management Event */
-static const char *me_pmevent_values[] = {
- [ME_HFS2_PMEVENT_CLEAN_MOFF_MX_WAKE] =
- "Clean Moff->Mx wake",
- [ME_HFS2_PMEVENT_MOFF_MX_WAKE_ERROR] =
- "Moff->Mx wake after an error",
- [ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET] =
- "Clean global reset",
- [ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET_ERROR] =
- "Global reset after an error",
- [ME_HFS2_PMEVENT_CLEAN_ME_RESET] =
- "Clean Intel ME reset",
- [ME_HFS2_PMEVENT_ME_RESET_EXCEPTION] =
- "Intel ME reset due to exception",
- [ME_HFS2_PMEVENT_PSEUDO_ME_RESET] =
- "Pseudo-global reset",
- [ME_HFS2_PMEVENT_S0MO_SXM3] =
- "S0/M0->Sx/M3",
- [ME_HFS2_PMEVENT_SXM3_S0M0] =
- "Sx/M3->S0/M0",
- [ME_HFS2_PMEVENT_NON_PWR_CYCLE_RESET] =
- "Non-power cycle reset",
- [ME_HFS2_PMEVENT_PWR_CYCLE_RESET_M3] =
- "Power cycle reset through M3",
- [ME_HFS2_PMEVENT_PWR_CYCLE_RESET_MOFF] =
- "Power cycle reset through Moff",
- [ME_HFS2_PMEVENT_SXMX_SXMOFF] =
- "Sx/Mx->Sx/Moff"
-};
-
-/* Progress Code 0 states */
-static const char *me_progress_rom_values[] = {
- [ME_HFS2_STATE_ROM_BEGIN] = "BEGIN",
- [ME_HFS2_STATE_ROM_DISABLE] = "DISABLE"
-};
-
-/* Progress Code 1 states */
-static const char *me_progress_bup_values[] = {
- [ME_HFS2_STATE_BUP_INIT] =
- "Initialization starts",
- [ME_HFS2_STATE_BUP_DIS_HOST_WAKE] =
- "Disable the host wake event",
- [ME_HFS2_STATE_BUP_FLOW_DET] =
- "Flow determination start process",
- [ME_HFS2_STATE_BUP_VSCC_ERR] =
- "Error reading/matching the VSCC table in the descriptor",
- [ME_HFS2_STATE_BUP_CHECK_STRAP] =
- "Check to see if straps say ME DISABLED",
- [ME_HFS2_STATE_BUP_PWR_OK_TIMEOUT] =
- "Timeout waiting for PWROK",
- [ME_HFS2_STATE_BUP_MANUF_OVRD_STRAP] =
- "Possibly handle BUP manufacturing override strap",
- [ME_HFS2_STATE_BUP_M3] =
- "Bringup in M3",
- [ME_HFS2_STATE_BUP_M0] =
- "Bringup in M0",
- [ME_HFS2_STATE_BUP_FLOW_DET_ERR] =
- "Flow detection error",
- [ME_HFS2_STATE_BUP_M3_CLK_ERR] =
- "M3 clock switching error",
- [ME_HFS2_STATE_BUP_CPU_RESET_DID_TIMEOUT_MEM_MISSING] =
- "Host error - CPU reset timeout, DID timeout, memory missing",
- [ME_HFS2_STATE_BUP_M3_KERN_LOAD] =
- "M3 kernel load",
- [ME_HFS2_STATE_BUP_T32_MISSING] =
- "T34 missing - cannot program ICC",
- [ME_HFS2_STATE_BUP_WAIT_DID] =
- "Waiting for DID BIOS message",
- [ME_HFS2_STATE_BUP_WAIT_DID_FAIL] =
- "Waiting for DID BIOS message failure",
- [ME_HFS2_STATE_BUP_DID_NO_FAIL] =
- "DID reported no error",
- [ME_HFS2_STATE_BUP_ENABLE_UMA] =
- "Enabling UMA",
- [ME_HFS2_STATE_BUP_ENABLE_UMA_ERR] =
- "Enabling UMA error",
- [ME_HFS2_STATE_BUP_SEND_DID_ACK] =
- "Sending DID Ack to BIOS",
- [ME_HFS2_STATE_BUP_SEND_DID_ACK_ERR] =
- "Sending DID Ack to BIOS error",
- [ME_HFS2_STATE_BUP_M0_CLK] =
- "Switching clocks in M0",
- [ME_HFS2_STATE_BUP_M0_CLK_ERR] =
- "Switching clocks in M0 error",
- [ME_HFS2_STATE_BUP_TEMP_DIS] =
- "ME in temp disable",
- [ME_HFS2_STATE_BUP_M0_KERN_LOAD] =
- "M0 kernel load",
-};
-
-/* Progress Code 3 states */
-static const char *me_progress_policy_values[] = {
- [ME_HFS2_STATE_POLICY_ENTRY] = "Entry into Policy Module",
- [ME_HFS2_STATE_POLICY_RCVD_S3] = "Received S3 entry",
- [ME_HFS2_STATE_POLICY_RCVD_S4] = "Received S4 entry",
- [ME_HFS2_STATE_POLICY_RCVD_S5] = "Received S5 entry",
- [ME_HFS2_STATE_POLICY_RCVD_UPD] = "Received UPD entry",
- [ME_HFS2_STATE_POLICY_RCVD_PCR] = "Received PCR entry",
- [ME_HFS2_STATE_POLICY_RCVD_NPCR] = "Received NPCR entry",
- [ME_HFS2_STATE_POLICY_RCVD_HOST_WAKE] = "Received host wake",
- [ME_HFS2_STATE_POLICY_RCVD_AC_DC] = "Received AC<>DC switch",
- [ME_HFS2_STATE_POLICY_RCVD_DID] = "Received DRAM Init Done",
- [ME_HFS2_STATE_POLICY_VSCC_NOT_FOUND] =
- "VSCC Data not found for flash device",
- [ME_HFS2_STATE_POLICY_VSCC_INVALID] =
- "VSCC Table is not valid",
- [ME_HFS2_STATE_POLICY_FPB_ERR] =
- "Flash Partition Boundary is outside address space",
- [ME_HFS2_STATE_POLICY_DESCRIPTOR_ERR] =
- "ME cannot access the chipset descriptor region",
- [ME_HFS2_STATE_POLICY_VSCC_NO_MATCH] =
- "Required VSCC values for flash parts do not match",
-};
-
-void intel_me_status(void)
-{
- struct me_hfs _hfs, *hfs = &_hfs;
- struct me_hfs2 _hfs2, *hfs2 = &_hfs2;
-
- me_read_dword_ptr(hfs, PCI_ME_HFS);
- me_read_dword_ptr(hfs2, PCI_ME_HFS2);
-
- /* Check Current States */
- printk(BIOS_DEBUG, "ME: FW Partition Table : %s\n",
- hfs->fpt_bad ? "BAD" : "OK");
- printk(BIOS_DEBUG, "ME: Bringup Loader Failure : %s\n",
- hfs->ft_bup_ld_flr ? "YES" : "NO");
- printk(BIOS_DEBUG, "ME: Firmware Init Complete : %s\n",
- hfs->fw_init_complete ? "YES" : "NO");
- printk(BIOS_DEBUG, "ME: Manufacturing Mode : %s\n",
- hfs->mfg_mode ? "YES" : "NO");
- printk(BIOS_DEBUG, "ME: Boot Options Present : %s\n",
- hfs->boot_options_present ? "YES" : "NO");
- printk(BIOS_DEBUG, "ME: Update In Progress : %s\n",
- hfs->update_in_progress ? "YES" : "NO");
- printk(BIOS_DEBUG, "ME: Current Working State : %s\n",
- me_cws_values[hfs->working_state]);
- printk(BIOS_DEBUG, "ME: Current Operation State : %s\n",
- me_opstate_values[hfs->operation_state]);
- printk(BIOS_DEBUG, "ME: Current Operation Mode : %s\n",
- me_opmode_values[hfs->operation_mode]);
- printk(BIOS_DEBUG, "ME: Error Code : %s\n",
- me_error_values[hfs->error_code]);
- printk(BIOS_DEBUG, "ME: Progress Phase : %s\n",
- me_progress_values[hfs2->progress_code]);
- printk(BIOS_DEBUG, "ME: Power Management Event : %s\n",
- me_pmevent_values[hfs2->current_pmevent]);
-
- printk(BIOS_DEBUG, "ME: Progress Phase State : ");
- switch (hfs2->progress_code) {
- case ME_HFS2_PHASE_ROM: /* ROM Phase */
- printk(BIOS_DEBUG, "%s",
- me_progress_rom_values[hfs2->current_state]);
- break;
-
- case ME_HFS2_PHASE_UKERNEL: /* uKernel Phase */
- printk(BIOS_DEBUG, "0x%02x", hfs2->current_state);
- break;
-
- case ME_HFS2_PHASE_BUP: /* Bringup Phase */
- if (hfs2->current_state < ARRAY_SIZE(me_progress_bup_values)
- && me_progress_bup_values[hfs2->current_state])
- printk(BIOS_DEBUG, "%s",
- me_progress_bup_values[hfs2->current_state]);
- else
- printk(BIOS_DEBUG, "0x%02x", hfs2->current_state);
- break;
-
- case ME_HFS2_PHASE_POLICY: /* Policy Module Phase */
- if (hfs2->current_state < ARRAY_SIZE(me_progress_policy_values)
- && me_progress_policy_values[hfs2->current_state])
- printk(BIOS_DEBUG, "%s",
- me_progress_policy_values[hfs2->current_state]);
- else
- printk(BIOS_DEBUG, "0x%02x", hfs2->current_state);
- break;
-
- case ME_HFS2_PHASE_HOST_COMM: /* Host Communication Phase */
- if (!hfs2->current_state)
- printk(BIOS_DEBUG, "Host communication established");
- else
- printk(BIOS_DEBUG, "0x%02x", hfs2->current_state);
- break;
-
- default:
- printk(BIOS_DEBUG, "Unknown phase: 0x%02x state: 0x%02x",
- hfs2->progress_code, hfs2->current_state);
- }
- printk(BIOS_DEBUG, "\n");
-}
-#endif
-
-void intel_me_hsio_version(uint16_t *version, uint16_t *checksum)
-{
- int count;
- u32 hsiover;
- struct me_hfs hfs;
-
- /* Query for HSIO version, overloads H_GS and HFS */
- pci_write_config32(PCH_DEV_ME, PCI_ME_H_GS,
- ME_HSIO_MESSAGE | ME_HSIO_CMD_GETHSIOVER);
-
- /* Must wait for ME acknowledgement */
- for (count = ME_RETRY; count > 0; --count) {
- me_read_dword_ptr(&hfs, PCI_ME_HFS);
- if (hfs.bios_msg_ack)
- break;
- udelay(ME_DELAY);
- }
- if (!count) {
- printk(BIOS_ERR, "ERROR: ME failed to respond\n");
- return;
- }
-
- /* HSIO version should be in HFS_5 */
- hsiover = pci_read_config32(PCH_DEV_ME, PCI_ME_HFS5);
- *version = hsiover >> 16;
- *checksum = hsiover & 0xffff;
-
- printk(BIOS_DEBUG, "ME: HSIO Version : %d (CRC 0x%04x)\n",
- *version, *checksum);
-
- /* Reset registers to normal behavior */
- pci_write_config32(PCH_DEV_ME, PCI_ME_H_GS,
- ME_HSIO_MESSAGE | ME_HSIO_CMD_GETHSIOVER);
-}
diff --git a/src/soc/intel/skylake/memmap.c b/src/soc/intel/skylake/memmap.c
index 7b8df28f71..f8ef01a6df 100644
--- a/src/soc/intel/skylake/memmap.c
+++ b/src/soc/intel/skylake/memmap.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,33 +15,87 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/io.h>
#include <cbmem.h>
#include <device/pci.h>
#include <soc/pci_devs.h>
+#include <soc/romstage.h>
+#include <soc/smm.h>
#include <soc/systemagent.h>
-static uintptr_t dpr_region_start(void)
+size_t mmap_region_granluarity(void)
+{
+ if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER))
+ /* Align to TSEG size when SMM is in use */
+ if (CONFIG_SMM_TSEG_SIZE != 0)
+ return CONFIG_SMM_TSEG_SIZE;
+
+ /* Make it 8MiB by default. */
+ return 8 << 20;
+}
+
+static void *smm_region_start(void)
{
/*
- * Base of DPR is top of usable DRAM below 4GiB. The register has
- * 1 MiB alignment and reports the TOP of the range, the base
- * must be calculated from the size in MiB in bits 11:4.
+ * SMM base address matches the top of DPR. The DPR register has
+ * 1 MiB alignment and reports the TOP of the DPR range.
*/
- uintptr_t dpr = pci_read_config32(SA_DEV_ROOT, DPR);
- uintptr_t tom = dpr & ~((1 << 20) - 1);
-
- /* Subtract DMA Protected Range size if enabled */
- if (dpr & DPR_EPM)
- tom -= (dpr & DPR_SIZE_MASK) << 16;
+ uint32_t smm_base = pci_read_config32(SA_DEV_ROOT, DPR);
+ smm_base = ALIGN_DOWN(smm_base, 1 << 20);
+ return (void *)smm_base;
+}
- return tom;
+void smm_region(void **start, size_t *size)
+{
+ *start = smm_region_start();
+ *size = mmap_region_granluarity();
}
void *cbmem_top(void)
{
- return (void *) dpr_region_start();
+ /*
+ * +-------------------------+ Top of RAM (aligned)
+ * | System Management Mode |
+ * | code and data | Length: CONFIG_TSEG_SIZE
+ * | (TSEG) |
+ * +-------------------------+ SMM base (aligned)
+ * | |
+ * | Chipset Reserved Memory | Length: Multiple of CONFIG_TSEG_SIZE
+ * | |
+ * +-------------------------+ top_of_ram (aligned)
+ * | |
+ * | CBMEM Root |
+ * | |
+ * +-------------------------+
+ * | |
+ * | FSP Reserved Memory |
+ * | |
+ * +-------------------------+
+ * | |
+ * | Various CBMEM Entries |
+ * | |
+ * +-------------------------+ top_of_stack (8 byte aligned)
+ * | |
+ * | stack (CBMEM Entry) |
+ * | |
+ * +-------------------------+
+ */
+
+ unsigned long top_of_ram = (unsigned long)smm_region_start();
+
+ /*
+ * Subtract DMA Protected Range size if enabled and align to a multiple
+ * of TSEG size.
+ */
+ u32 dpr = pci_read_config32(SA_DEV_ROOT, DPR);
+ if (dpr & DPR_EPM) {
+ top_of_ram -= (dpr & DPR_SIZE_MASK) << 16;
+ top_of_ram = ALIGN_DOWN(top_of_ram, mmap_region_granluarity());
+ }
+
+ return (void *)(top_of_ram - CONFIG_CHIPSET_RESERVED_MEM_BYTES);
}
+
diff --git a/src/soc/intel/skylake/microcode/Makefile.inc b/src/soc/intel/skylake/microcode/Makefile.inc
index bf9e345dbd..2356b8467e 100644
--- a/src/soc/intel/skylake/microcode/Makefile.inc
+++ b/src/soc/intel/skylake/microcode/Makefile.inc
@@ -1 +1,16 @@
-cpu_microcode-y += microcode_blob.c
+# Add CPU uCode source to list of files to build.
+cpu_microcode-$(CONFIG_CPU_MICROCODE_CBFS_GENERATE) += microcode_blob.c
+
+# Include path for addition microcode sources.
+INCLUDES += -I$(CONFIG_EXTRA_MICROCODE_INCLUDE_PATH)
+
+# This section overrides the default build process for the microcode to place
+# it at a known location in the CBFS. This only needs to be enabled if FSP is
+# being used.
+# Define the correct offset for the file in CBFS
+fsp_ucode_cbfs_base = $(CONFIG_CPU_MICROCODE_CBFS_LOC)
+
+# Override the location that was supplied by the core code.
+add-cpu-microcode-to-cbfs = \
+ $(CBFSTOOL) $(1) add -n $(cpu_ucode_cbfs_name) -f $(cpu_ucode_cbfs_file) -t microcode -b $(fsp_ucode_cbfs_base)
+
diff --git a/src/soc/intel/skylake/microcode/microcode_blob.c b/src/soc/intel/skylake/microcode/microcode_blob.c
index 4f06cb2266..511c899d6b 100644
--- a/src/soc/intel/skylake/microcode/microcode_blob.c
+++ b/src/soc/intel/skylake/microcode/microcode_blob.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,10 +15,10 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-unsigned microcode[] = {
-#include "../../../../../3rdparty/blobs/soc/intel/broadwell/microcode_blob.h"
+unsigned int microcode[] = {
+#include "microcode_blob.h"
};
diff --git a/src/soc/intel/skylake/include/soc/reset.h b/src/soc/intel/skylake/microcode/microcode_blob.h
index 6f21181a0c..4bca894446 100644
--- a/src/soc/intel/skylake/include/soc/reset.h
+++ b/src/soc/intel/skylake/microcode/microcode_blob.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,12 +15,13 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#ifndef _BROADWELL_RESET_H_
-#define _BROADWELL_RESET_H_
+#include "MC0406E2_00000017_00000018.h"
-void reset_system(void);
-
-#endif
+ /* Dummy terminator */
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
diff --git a/src/soc/intel/skylake/minihd.c b/src/soc/intel/skylake/minihd.c
deleted file mode 100644
index ac5af8d77a..0000000000
--- a/src/soc/intel/skylake/minihd.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008 Advanced Micro Devices, Inc.
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <arch/io.h>
-#include <delay.h>
-#include <stdlib.h>
-#include <soc/intel/common/hda_verb.h>
-#include <soc/ramstage.h>
-
-static const u32 minihd_verb_table[] = {
- /* coreboot specific header */
- 0x80862807, // Codec Vendor / Device ID: Intel Mini-HD
- 0x00000000, // Subsystem ID
- 0x00000004, // Number of jacks
-
- /* Enable 3rd Pin and Converter Widget */
- 0x00878101,
-
- /* Pin Widget 5 - PORT B */
- 0x00571C10,
- 0x00571D00,
- 0x00571E56,
- 0x00571F18,
-
- /* Pin Widget 6 - PORT C */
- 0x00671C20,
- 0x00671D00,
- 0x00671E56,
- 0x00671F18,
-
- /* Pin Widget 7 - PORT D */
- 0x00771C30,
- 0x00771D00,
- 0x00771E56,
- 0x00771F18,
-
- /* Disable 3rd Pin and Converter Widget */
- 0x00878100,
-
- /* Dummy entries to fill out the table */
- 0x00878100,
- 0x00878100,
-};
-
-static void minihd_init(struct device *dev)
-{
- struct resource *res;
- u8 *base, reg32;
- int codec_mask, i;
-
- /* Find base address */
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (!res)
- return;
-
- base = res2mmio(res, 0, 0);
- printk(BIOS_DEBUG, "Mini-HD: base = %p\n", base);
-
- /* Set Bus Master */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
-
- /* Mini-HD configuration */
- reg32 = read32(base + 0x100c);
- reg32 &= 0xfffc0000;
- reg32 |= 0x4;
- write32(base + 0x100c, reg32);
-
- reg32 = read32(base + 0x1010);
- reg32 &= 0xfffc0000;
- reg32 |= 0x4b;
- write32(base + 0x1010, reg32);
-
- /* Init the codec and write the verb table */
- codec_mask = hda_codec_detect(base);
-
- if (codec_mask) {
- for (i = 3; i >= 0; i--) {
- if (codec_mask & (1 << i))
- hda_codec_init(base, i,
- sizeof(minihd_verb_table),
- minihd_verb_table);
- }
- }
-}
-
-static struct device_operations minihd_ops = {
- .read_resources = &pci_dev_read_resources,
- .set_resources = &pci_dev_set_resources,
- .enable_resources = &pci_dev_enable_resources,
- .init = &minihd_init,
- .ops_pci = &broadwell_pci_ops,
-};
-
-static const unsigned short pci_device_ids[] = {
- 0x0a0c, /* Haswell */
- 0x160c, /* Broadwell */
- 0
-};
-
-static const struct pci_driver minihd_driver __pci_driver = {
- .ops = &minihd_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .devices = pci_device_ids,
-};
diff --git a/src/soc/intel/skylake/monotonic_timer.c b/src/soc/intel/skylake/monotonic_timer.c
index 39134ef20a..35ad911168 100644
--- a/src/soc/intel/skylake/monotonic_timer.c
+++ b/src/soc/intel/skylake/monotonic_timer.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <stdint.h>
@@ -30,8 +31,10 @@ static struct monotonic_counter {
static inline uint32_t read_counter_msr(void)
{
- /* Even though the MSR is 64-bit it is assumed that the hardware
- * is polled frequently enough to only use the lower 32-bits. */
+ /*
+ * Even though the MSR is 64-bit it is assumed that the hardware
+ * is polled frequently enough to only use the lower 32-bits.
+ */
msr_t counter_msr;
counter_msr = rdmsr(MSR_COUNTER_24_MHZ);
diff --git a/src/soc/intel/skylake/pch.c b/src/soc/intel/skylake/pch.c
index ab546e8d55..8657402ab8 100644
--- a/src/soc/intel/skylake/pch.c
+++ b/src/soc/intel/skylake/pch.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <console/console.h>
@@ -24,12 +25,9 @@
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_def.h>
-#include <soc/iobp.h>
#include <soc/pch.h>
#include <soc/pci_devs.h>
#include <soc/ramstage.h>
-#include <soc/rcba.h>
-#include <soc/serialio.h>
#include <soc/spi.h>
u8 pch_revision(void)
@@ -42,160 +40,43 @@ u16 pch_type(void)
return pci_read_config16(PCH_DEV_LPC, PCI_DEVICE_ID);
}
-/* Return 1 if PCH type is WildcatPoint */
-int pch_is_wpt(void)
+void *get_spi_bar(void)
{
- return ((pch_type() & 0xfff0) == 0x9cc0) ? 1 : 0;
-}
-
-/* Return 1 if PCH type is WildcatPoint ULX */
-int pch_is_wpt_ulx(void)
-{
- u16 lpcid = pch_type();
-
- switch (lpcid) {
- case PCH_WPT_BDW_Y_SAMPLE:
- case PCH_WPT_BDW_Y_PREMIUM:
- case PCH_WPT_BDW_Y_BASE:
- return 1;
- }
-
- return 0;
+ device_t dev = PCH_DEV_SPI;
+ uint32_t bar;
+
+ bar = pci_read_config32(dev, PCH_SPI_BASE_ADDRESS);
+ /* Bits 31-12 are the base address as per EDS for SPI 1F/5,
+ * Don't care about 0-11 bit
+ */
+ return (void *)(bar & ~(B_PCH_SPI_BAR0_MASK));
}
u32 pch_read_soft_strap(int id)
{
- u32 fdoc;
+ uint32_t fdoc;
+ void *spibar = get_spi_bar();
- fdoc = SPIBAR32(SPIBAR_FDOC);
+ fdoc = read32(spibar + SPIBAR_FDOC);
fdoc &= ~0x00007ffc;
- SPIBAR32(SPIBAR_FDOC) = fdoc;
+ write32(spibar + SPIBAR_FDOC, fdoc);
fdoc |= 0x00004000;
fdoc |= id * 4;
- SPIBAR32(SPIBAR_FDOC) = fdoc;
-
- return SPIBAR32(SPIBAR_FDOD);
-}
-
-#ifndef __PRE_RAM__
+ write32(spibar + SPIBAR_FDOC, fdoc);
-/* Put device in D3Hot Power State */
-static void pch_enable_d3hot(device_t dev)
-{
- u32 reg32 = pci_read_config32(dev, PCH_PCS);
- reg32 |= PCH_PCS_PS_D3HOT;
- pci_write_config32(dev, PCH_PCS, reg32);
-}
-
-/* RCBA function disable and posting read to flush the transaction */
-static void rcba_function_disable(u32 reg, u32 bit)
-{
- RCBA32_OR(reg, bit);
- RCBA32(reg);
-}
-
-/* Set bit in Function Disable register to hide this device */
-void pch_disable_devfn(device_t dev)
-{
- switch (dev->path.pci.devfn) {
- case PCH_DEVFN_ADSP: /* Audio DSP */
- rcba_function_disable(FD, PCH_DISABLE_ADSPD);
- break;
- case PCH_DEVFN_XHCI: /* XHCI */
- rcba_function_disable(FD, PCH_DISABLE_XHCI);
- break;
- case PCH_DEVFN_SDMA: /* DMA */
- pch_enable_d3hot(dev);
- pch_iobp_update(SIO_IOBP_FUNCDIS0, ~0UL, SIO_IOBP_FUNCDIS_DIS);
- break;
- case PCH_DEVFN_I2C0: /* I2C0 */
- pch_enable_d3hot(dev);
- pch_iobp_update(SIO_IOBP_FUNCDIS1, ~0UL, SIO_IOBP_FUNCDIS_DIS);
- break;
- case PCH_DEVFN_I2C1: /* I2C1 */
- pch_enable_d3hot(dev);
- pch_iobp_update(SIO_IOBP_FUNCDIS2, ~0UL, SIO_IOBP_FUNCDIS_DIS);
- break;
- case PCH_DEVFN_SPI0: /* SPI0 */
- pch_enable_d3hot(dev);
- pch_iobp_update(SIO_IOBP_FUNCDIS3, ~0UL, SIO_IOBP_FUNCDIS_DIS);
- break;
- case PCH_DEVFN_SPI1: /* SPI1 */
- pch_enable_d3hot(dev);
- pch_iobp_update(SIO_IOBP_FUNCDIS4, ~0UL, SIO_IOBP_FUNCDIS_DIS);
- break;
- case PCH_DEVFN_UART0: /* UART0 */
- pch_enable_d3hot(dev);
- pch_iobp_update(SIO_IOBP_FUNCDIS5, ~0UL, SIO_IOBP_FUNCDIS_DIS);
- break;
- case PCH_DEVFN_UART1: /* UART1 */
- pch_enable_d3hot(dev);
- pch_iobp_update(SIO_IOBP_FUNCDIS6, ~0UL, SIO_IOBP_FUNCDIS_DIS);
- break;
- case PCH_DEVFN_ME: /* MEI #1 */
- rcba_function_disable(FD2, PCH_DISABLE_MEI1);
- break;
- case PCH_DEVFN_ME_2: /* MEI #2 */
- rcba_function_disable(FD2, PCH_DISABLE_MEI2);
- break;
- case PCH_DEVFN_ME_IDER: /* IDE-R */
- rcba_function_disable(FD2, PCH_DISABLE_IDER);
- break;
- case PCH_DEVFN_ME_KT: /* KT */
- rcba_function_disable(FD2, PCH_DISABLE_KT);
- break;
- case PCH_DEVFN_SDIO: /* SDIO */
- pch_enable_d3hot(dev);
- pch_iobp_update(SIO_IOBP_FUNCDIS7, ~0UL, SIO_IOBP_FUNCDIS_DIS);
- break;
- case PCH_DEVFN_GBE: /* Gigabit Ethernet */
- rcba_function_disable(BUC, PCH_DISABLE_GBE);
- break;
- case PCH_DEVFN_HDA: /* HD Audio Controller */
- rcba_function_disable(FD, PCH_DISABLE_HD_AUDIO);
- break;
- case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 0): /* PCI Express Root Port 1 */
- case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 1): /* PCI Express Root Port 2 */
- case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 2): /* PCI Express Root Port 3 */
- case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 3): /* PCI Express Root Port 4 */
- case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 4): /* PCI Express Root Port 5 */
- case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 5): /* PCI Express Root Port 6 */
- case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 6): /* PCI Express Root Port 7 */
- case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 7): /* PCI Express Root Port 8 */
- rcba_function_disable(FD,
- PCH_DISABLE_PCIE(PCI_FUNC(dev->path.pci.devfn)));
- break;
- case PCH_DEVFN_EHCI: /* EHCI #1 */
- rcba_function_disable(FD, PCH_DISABLE_EHCI1);
- break;
- case PCH_DEVFN_LPC: /* LPC */
- rcba_function_disable(FD, PCH_DISABLE_LPC);
- break;
- case PCH_DEVFN_SATA: /* SATA #1 */
- rcba_function_disable(FD, PCH_DISABLE_SATA1);
- break;
- case PCH_DEVFN_SMBUS: /* SMBUS */
- rcba_function_disable(FD, PCH_DISABLE_SMBUS);
- break;
- case PCH_DEVFN_SATA2: /* SATA #2 */
- rcba_function_disable(FD, PCH_DISABLE_SATA2);
- break;
- case PCH_DEVFN_THERMAL: /* Thermal Subsystem */
- rcba_function_disable(FD, PCH_DISABLE_THERMAL);
- break;
- }
+ return read32(spibar + SPIBAR_FDOD);
}
-void broadwell_pch_enable_dev(device_t dev)
+#if ENV_RAMSTAGE
+void pch_enable_dev(device_t dev)
{
+ /* FSP should implement routines to disable PCH IPs */
u32 reg32;
/* These devices need special enable/disable handling */
switch (PCI_SLOT(dev->path.pci.devfn)) {
case PCH_DEV_SLOT_PCIE:
- case PCH_DEV_SLOT_EHCI:
- case PCH_DEV_SLOT_HDA:
return;
}
@@ -209,7 +90,6 @@ void broadwell_pch_enable_dev(device_t dev)
pci_write_config32(dev, PCI_COMMAND, reg32);
/* Disable this device if possible */
- pch_disable_devfn(dev);
} else {
/* Enable SERR */
reg32 = pci_read_config32(dev, PCI_COMMAND);
diff --git a/src/soc/intel/skylake/pcie.c b/src/soc/intel/skylake/pcie.c
index 895df932a0..dbe119a27c 100644
--- a/src/soc/intel/skylake/pcie.c
+++ b/src/soc/intel/skylake/pcie.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,9 +16,10 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
+#include <chip.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
@@ -26,582 +28,11 @@
#include <device/pci_ids.h>
#include <soc/gpio.h>
#include <soc/lpc.h>
-#include <soc/iobp.h>
#include <soc/pch.h>
#include <soc/pci_devs.h>
-#include <soc/rcba.h>
-#include <soc/intel/broadwell/chip.h>
#include <soc/cpu.h>
#include <delay.h>
-static void pcie_update_cfg8(device_t dev, int reg, u8 mask, u8 or);
-static void pcie_update_cfg(device_t dev, int reg, u32 mask, u32 or);
-
-/* Low Power variant has 6 root ports. */
-#define NUM_ROOT_PORTS 6
-
-struct root_port_config {
- /* RPFN is a write-once register so keep a copy until it is written */
- u32 orig_rpfn;
- u32 new_rpfn;
- u32 pin_ownership;
- u32 strpfusecfg1;
- u32 strpfusecfg2;
- u32 strpfusecfg3;
- u32 b0d28f0_32c;
- u32 b0d28f4_32c;
- u32 b0d28f5_32c;
- int coalesce;
- int gbe_port;
- int num_ports;
- device_t ports[NUM_ROOT_PORTS];
-};
-
-static struct root_port_config rpc;
-
-static inline int root_port_is_first(device_t dev)
-{
- return PCI_FUNC(dev->path.pci.devfn) == 0;
-}
-
-static inline int root_port_is_last(device_t dev)
-{
- return PCI_FUNC(dev->path.pci.devfn) == (rpc.num_ports - 1);
-}
-
-/* Root ports are numbered 1..N in the documentation. */
-static inline int root_port_number(device_t dev)
-{
- return PCI_FUNC(dev->path.pci.devfn) + 1;
-}
-
-static void root_port_config_update_gbe_port(void)
-{
- /* Is the Gbe Port enabled? */
- if (!((rpc.strpfusecfg1 >> 19) & 1))
- return;
-
- switch ((rpc.strpfusecfg1 >> 16) & 0x7) {
- case 0:
- rpc.gbe_port = 3;
- break;
- case 1:
- rpc.gbe_port = 4;
- break;
- case 2:
- case 3:
- case 4:
- case 5:
- /* Lanes 0-4 of Root Port 5. */
- rpc.gbe_port = 5;
- break;
- default:
- printk(BIOS_DEBUG, "Invalid GbE Port Selection.\n");
- }
-}
-
-static void pcie_iosf_port_grant_count(device_t dev)
-{
- u8 update_val;
- u32 rpcd = (pci_read_config32(dev, 0xfc) > 14) & 0x3;
-
- switch (rpcd) {
- case 1:
- case 3:
- update_val = 0x02;
- break;
- case 2:
- update_val = 0x22;
- break;
- default:
- update_val = 0x00;
- break;
- }
-
- RCBA32(0x103C) = (RCBA32(0x103C) & (~0xff)) | update_val;
-}
-
-static void root_port_init_config(device_t dev)
-{
- int rp;
- u32 data;
- u8 resp, id;
-
- if (root_port_is_first(dev)) {
- rpc.orig_rpfn = RCBA32(RPFN);
- rpc.new_rpfn = rpc.orig_rpfn;
- rpc.num_ports = NUM_ROOT_PORTS;
- rpc.gbe_port = -1;
- /* RP0 f5[3:0] = 0101b*/
- pcie_update_cfg8(dev, 0xf5, ~0xa, 0x5);
-
- pcie_iosf_port_grant_count(dev);
-
- rpc.pin_ownership = pci_read_config32(dev, 0x410);
- root_port_config_update_gbe_port();
-
- pcie_update_cfg8(dev, 0xe2, ~(3 << 4), (3 << 4));
- if (dev->chip_info != NULL) {
- config_t *config = dev->chip_info;
- rpc.coalesce = config->pcie_port_coalesce;
- }
- }
-
- rp = root_port_number(dev);
- if (rp > rpc.num_ports) {
- printk(BIOS_ERR, "Found Root Port %d, expecting %d\n",
- rp, rpc.num_ports);
- return;
- }
-
- /* Read the fuse configuration and pin ownership. */
- switch (rp) {
- case 1:
- rpc.strpfusecfg1 = pci_read_config32(dev, 0xfc);
- rpc.b0d28f0_32c = pci_read_config32(dev, 0x32c);
- break;
- case 5:
- rpc.strpfusecfg2 = pci_read_config32(dev, 0xfc);
- rpc.b0d28f4_32c = pci_read_config32(dev, 0x32c);
- break;
- case 6:
- rpc.b0d28f5_32c = pci_read_config32(dev, 0x32c);
- rpc.strpfusecfg3 = pci_read_config32(dev, 0xfc);
- break;
- default:
- break;
- }
-
- pcie_update_cfg(dev, 0x418, 0, 0x02000430);
-
- if (root_port_is_first(dev)) {
- /*
- * set RP0 PCICFG E2h[5:4] = 11b and E1h[6] = 1
- * before configuring ASPM
- */
- id = 0xe0 + (u8)(RCBA32(RPFN) & 0x07);
- pch_iobp_exec(0xE00000E0, IOBP_PCICFG_READ, id, &data, &resp);
- data |= ((0x30 << 16) | (0x40 << 8));
- pch_iobp_exec(0xE00000E0, IOBP_PCICFG_WRITE, id, &data, &resp);
- }
-
- /* Cache pci device. */
- rpc.ports[rp - 1] = dev;
-}
-
-/* Update devicetree with new Root Port function number assignment */
-static void pch_pcie_device_set_func(int index, int pci_func)
-{
- device_t dev;
- unsigned new_devfn;
-
- dev = rpc.ports[index];
-
- /* Set the new PCI function field for this Root Port. */
- rpc.new_rpfn &= ~RPFN_FNMASK(index);
- rpc.new_rpfn |= RPFN_FNSET(index, pci_func);
-
- /* Determine the new devfn for this port */
- new_devfn = PCI_DEVFN(PCH_DEV_SLOT_PCIE, pci_func);
-
- if (dev->path.pci.devfn != new_devfn) {
- printk(BIOS_DEBUG,
- "PCH: PCIe map %02x.%1x -> %02x.%1x\n",
- PCI_SLOT(dev->path.pci.devfn),
- PCI_FUNC(dev->path.pci.devfn),
- PCI_SLOT(new_devfn), PCI_FUNC(new_devfn));
-
- dev->path.pci.devfn = new_devfn;
- }
-}
-
-static void pcie_enable_clock_gating(void)
-{
- int i;
- int enabled_ports = 0;
- int is_broadwell = !!(cpu_family_model() == BROADWELL_FAMILY_ULT);
-
- for (i = 0; i < rpc.num_ports; i++) {
- device_t dev;
- int rp;
-
- dev = rpc.ports[i];
- rp = root_port_number(dev);
-
- if (!dev->enabled) {
- /* Configure shared resource clock gating. */
- if (rp == 1 || rp == 5 || rp == 6)
- pcie_update_cfg8(dev, 0xe1, 0xc3, 0x3c);
-
- pcie_update_cfg8(dev, 0xe2, ~(3 << 4), (3 << 4));
- pcie_update_cfg(dev, 0x420, ~(1 << 31), (1 << 31));
-
- /* Per-Port CLKREQ# handling. */
- if (gpio_is_native(18 + rp - 1))
- pcie_update_cfg(dev, 0x420, ~0, (3 << 29));
-
- /* Enable static clock gating. */
- if (rp == 1 && !rpc.ports[1]->enabled &&
- !rpc.ports[2]->enabled && !rpc.ports[3]->enabled) {
- pcie_update_cfg8(dev, 0xe2, ~1, 1);
- pcie_update_cfg8(dev, 0xe1, 0x7f, 0x80);
- } else if (rp == 5 || rp == 6) {
- pcie_update_cfg8(dev, 0xe2, ~1, 1);
- pcie_update_cfg8(dev, 0xe1, 0x7f, 0x80);
- }
- continue;
- }
-
- enabled_ports++;
-
- /* Enable dynamic clock gating. */
- pcie_update_cfg8(dev, 0xe1, 0xfc, 0x03);
- pcie_update_cfg8(dev, 0xe2, ~(1 << 6), (1 << 6));
- pcie_update_cfg8(dev, 0xe8, ~(3 << 2), (2 << 2));
-
- /* Update PECR1 register. */
- pcie_update_cfg8(dev, 0xe8, ~0, 3);
- if (is_broadwell) {
- pcie_update_cfg(dev, 0x324, ~((1 << 5) | (1 << 14)),
- ((1 << 5) | (1 << 14)));
- } else {
- pcie_update_cfg(dev, 0x324, ~(1 << 5), (1 << 5));
- }
- /* Per-Port CLKREQ# handling. */
- if (gpio_is_native(18 + rp - 1))
- /*
- * In addition to D28Fx PCICFG 420h[30:29] = 11b,
- * set 420h[17] = 0b and 420[0] = 1b for L1 SubState.
- */
- pcie_update_cfg(dev, 0x420, ~0x20000, (3 << 29) | 1);
-
- /* Configure shared resource clock gating. */
- if (rp == 1 || rp == 5 || rp == 6)
- pcie_update_cfg8(dev, 0xe1, 0xc3, 0x3c);
-
- /* CLKREQ# VR Idle Enable */
- RCBA32_OR(0x2b1c, (1 << (16 + i)));
- }
-
- if (!enabled_ports)
- pcie_update_cfg8(rpc.ports[0], 0xe1, ~(1 << 6), (1 << 6));
-}
-
-static void root_port_commit_config(void)
-{
- int i;
-
- /* If the first root port is disabled the coalesce ports. */
- if (!rpc.ports[0]->enabled)
- rpc.coalesce = 1;
-
- /* Perform clock gating configuration. */
- pcie_enable_clock_gating();
-
- for (i = 0; i < rpc.num_ports; i++) {
- device_t dev;
- u32 reg32;
- int n = 0;
-
- dev = rpc.ports[i];
-
- if (dev == NULL) {
- printk(BIOS_ERR, "Root Port %d device is NULL?\n", i+1);
- continue;
- }
-
- if (dev->enabled)
- continue;
-
- printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev));
-
- /* 8.2 Configuration of PCI Express Root Ports */
- pcie_update_cfg(dev, 0x338, ~(1 << 26), 1 << 26);
-
- do {
- reg32 = pci_read_config32(dev, 0x328);
- n++;
- if (((reg32 & 0xff000000) == 0x01000000) || (n > 50))
- break;
- udelay(100);
- } while (1);
-
- if (n > 50)
- printk(BIOS_DEBUG, "%s: Timeout waiting for 328h\n",
- dev_path(dev));
-
- pcie_update_cfg(dev, 0x408, ~(1 << 27), 1 << 27);
-
- /* Disable this device if possible */
- pch_disable_devfn(dev);
- }
-
- if (rpc.coalesce) {
- int current_func;
-
- /* For all Root Ports N enabled ports get assigned the lower
- * PCI function number. The disabled ones get upper PCI
- * function numbers. */
- current_func = 0;
- for (i = 0; i < rpc.num_ports; i++) {
- if (!rpc.ports[i]->enabled)
- continue;
- pch_pcie_device_set_func(i, current_func);
- current_func++;
- }
-
- /* Allocate the disabled devices' PCI function number. */
- for (i = 0; i < rpc.num_ports; i++) {
- if (rpc.ports[i]->enabled)
- continue;
- pch_pcie_device_set_func(i, current_func);
- current_func++;
- }
- }
-
- printk(BIOS_SPEW, "PCH: RPFN 0x%08x -> 0x%08x\n",
- rpc.orig_rpfn, rpc.new_rpfn);
- RCBA32(RPFN) = rpc.new_rpfn;
-}
-
-static void root_port_mark_disable(device_t dev)
-{
- /* Mark device as disabled. */
- dev->enabled = 0;
- /* Mark device to be hidden. */
- rpc.new_rpfn |= RPFN_HIDE(PCI_FUNC(dev->path.pci.devfn));
-}
-
-static void root_port_check_disable(device_t dev)
-{
- int rp;
-
- /* Device already disabled. */
- if (!dev->enabled) {
- root_port_mark_disable(dev);
- return;
- }
-
- rp = root_port_number(dev);
-
- /* Is the GbE port mapped to this Root Port? */
- if (rp == rpc.gbe_port) {
- root_port_mark_disable(dev);
- return;
- }
-
- /* Check Root Port Configuration. */
- switch (rp) {
- case 2:
- /* Root Port 2 is disabled for all lane configurations
- * but config 00b (4x1 links). */
- if ((rpc.strpfusecfg1 >> 14) & 0x3) {
- root_port_mark_disable(dev);
- return;
- }
- break;
- case 3:
- /* Root Port 3 is disabled in config 11b (1x4 links). */
- if (((rpc.strpfusecfg1 >> 14) & 0x3) == 0x3) {
- root_port_mark_disable(dev);
- return;
- }
- break;
- case 4:
- /* Root Port 4 is disabled in configs 11b (1x4 links)
- * and 10b (2x2 links). */
- if ((rpc.strpfusecfg1 >> 14) & 0x2) {
- root_port_mark_disable(dev);
- return;
- }
- break;
- }
-
- /* Check Pin Ownership. */
- switch (rp) {
- case 1:
- /* Bit 0 is Root Port 1 ownership. */
- if ((rpc.pin_ownership & 0x1) == 0) {
- root_port_mark_disable(dev);
- return;
- }
- break;
- case 2:
- /* Bit 2 is Root Port 2 ownership. */
- if ((rpc.pin_ownership & 0x4) == 0) {
- root_port_mark_disable(dev);
- return;
- }
- break;
- case 6:
- /* Bits 7:4 are Root Port 6 pin-lane ownership. */
- if ((rpc.pin_ownership & 0xf0) == 0) {
- root_port_mark_disable(dev);
- return;
- }
- break;
- }
-}
-
-static void pcie_update_cfg8(device_t dev, int reg, u8 mask, u8 or)
-{
- u8 reg8;
-
- reg8 = pci_read_config8(dev, reg);
- reg8 &= mask;
- reg8 |= or;
- pci_write_config8(dev, reg, reg8);
-}
-
-static void pcie_update_cfg(device_t dev, int reg, u32 mask, u32 or)
-{
- u32 reg32;
-
- reg32 = pci_read_config32(dev, reg);
- reg32 &= mask;
- reg32 |= or;
- pci_write_config32(dev, reg, reg32);
-}
-
-static void pcie_add_0x0202000_iobp(u32 reg)
-{
- u32 reg32;
-
- reg32 = pch_iobp_read(reg);
- reg32 += (0x2 << 16) | (0x2 << 8);
- pch_iobp_write(reg, reg32);
-}
-
-static void pch_pcie_early(struct device *dev)
-{
- config_t *config = dev->chip_info;
- int do_aspm = 0;
- int rp = root_port_number(dev);
-
- switch (rp) {
- case 1:
- case 2:
- case 3:
- case 4:
- /*
- * Bits 31:28 of b0d28f0 0x32c register correspond to
- * Root Ports 4:1.
- */
- do_aspm = !!(rpc.b0d28f0_32c & (1 << (28 + rp - 1)));
- break;
- case 5:
- /*
- * Bit 28 of b0d28f4 0x32c register correspond to
- * Root Ports 4:1.
- */
- do_aspm = !!(rpc.b0d28f4_32c & (1 << 28));
- break;
- case 6:
- /*
- * Bit 28 of b0d28f5 0x32c register correspond to
- * Root Ports 4:1.
- */
- do_aspm = !!(rpc.b0d28f5_32c & (1 << 28));
- break;
- }
-
- /* Allow ASPM to be forced on in devicetree */
- if (config && (config->pcie_port_force_aspm & (1 << (rp - 1))))
- do_aspm = 1;
-
- printk(BIOS_DEBUG, "PCIe Root Port %d ASPM is %sabled\n",
- rp, do_aspm ? "en" : "dis");
-
- if (do_aspm) {
- /* Set ASPM bits in MPC2 register. */
- pcie_update_cfg(dev, 0xd4, ~(0x3 << 2), (1 << 4) | (0x2 << 2));
-
- /* Set unique clock exit latency in MPC register. */
- pcie_update_cfg(dev, 0xd8, ~(0x7 << 18), (0x7 << 18));
-
- switch (rp) {
- case 1:
- pcie_add_0x0202000_iobp(0xe9002440);
- break;
- case 2:
- pcie_add_0x0202000_iobp(0xe9002640);
- break;
- case 3:
- pcie_add_0x0202000_iobp(0xe9000840);
- break;
- case 4:
- pcie_add_0x0202000_iobp(0xe9000a40);
- break;
- case 5:
- pcie_add_0x0202000_iobp(0xe9000c40);
- pcie_add_0x0202000_iobp(0xe9000e40);
- pcie_add_0x0202000_iobp(0xe9001040);
- pcie_add_0x0202000_iobp(0xe9001240);
- break;
- case 6:
- /* Update IOBP based on lane ownership. */
- if (rpc.pin_ownership & (1 << 4))
- pcie_add_0x0202000_iobp(0xea002040);
- if (rpc.pin_ownership & (1 << 5))
- pcie_add_0x0202000_iobp(0xea002240);
- if (rpc.pin_ownership & (1 << 6))
- pcie_add_0x0202000_iobp(0xea002440);
- if (rpc.pin_ownership & (1 << 7))
- pcie_add_0x0202000_iobp(0xea002640);
- break;
- }
-
- pcie_update_cfg(dev, 0x338, ~(1 << 26), 0);
- }
-
- /* Enable LTR in Root Port. Disable OBFF. */
- pcie_update_cfg(dev, 0x64, ~(1 << 11) & ~(3 << 18), (1 << 11));
- pcie_update_cfg(dev, 0x68, ~(1 << 10), (1 << 10));
-
- pcie_update_cfg(dev, 0x318, ~(0xffff << 16), (0x1414 << 16));
-
- /* Set L1 exit latency in LCAP register. */
- if (!do_aspm && (pci_read_config8(dev, 0xf5) & 0x1))
- pcie_update_cfg(dev, 0x4c, ~(0x7 << 15), (0x4 << 15));
- else
- pcie_update_cfg(dev, 0x4c, ~(0x7 << 15), (0x2 << 15));
-
- pcie_update_cfg(dev, 0x314, 0x0, 0x743a361b);
-
- /* Set Common Clock Exit Latency in MPC register. */
- pcie_update_cfg(dev, 0xd8, ~(0x7 << 15), (0x3 << 15));
-
- pcie_update_cfg(dev, 0x33c, ~0x00ffffff, 0x854d74);
-
- /* Set Invalid Receive Range Check Enable in MPC register. */
- pcie_update_cfg(dev, 0xd8, ~0, (1 << 25));
-
- pcie_update_cfg8(dev, 0xf5, 0x0f, 0);
-
- /* Set AER Extended Cap ID to 01h and Next Cap Pointer to 200h. */
- pcie_update_cfg(dev, 0x100, ~(1 << 29) & ~0xfffff, (1 << 29) | 0x10001);
-
- /* Set L1 Sub-State Cap ID to 1Eh and Next Cap Pointer to None. */
- pcie_update_cfg(dev, 0x200, ~0xffff, 0x001e);
-
- pcie_update_cfg(dev, 0x320, ~(3 << 20) & ~(7 << 6),
- (1 << 20) | (3 << 6));
- /* Enable Relaxed Order from Root Port. */
- pcie_update_cfg(dev, 0x320, ~(3 << 23), (3 << 23));
-
- if (rp == 1 || rp == 5 || rp == 6)
- pcie_update_cfg8(dev, 0xf7, ~0xc, 0);
-
- /* Set EOI forwarding disable. */
- pcie_update_cfg(dev, 0xd4, ~0, (1 << 1));
-
- /* Read and write back write-once capability registers. */
- pcie_update_cfg(dev, 0x34, ~0, 0);
- pcie_update_cfg(dev, 0x40, ~0, 0);
- pcie_update_cfg(dev, 0x80, ~0, 0);
- pcie_update_cfg(dev, 0x90, ~0, 0);
-}
-
static void pch_pcie_init(struct device *dev)
{
u16 reg16;
@@ -645,43 +76,13 @@ static void pch_pcie_init(struct device *dev)
pci_write_config16(dev, 0x1e, reg16);
}
-static void pch_pcie_enable(device_t dev)
-{
- /* Add this device to the root port config structure. */
- root_port_init_config(dev);
-
- /* Check to see if this Root Port should be disabled. */
- root_port_check_disable(dev);
-
- /* Power Management init before enumeration */
- if (dev->enabled)
- pch_pcie_early(dev);
-
- /*
- * When processing the last PCIe root port we can now
- * update the Root Port Function Number and Hide register.
- */
- if (root_port_is_last(dev))
- root_port_commit_config();
-}
-
-static void pcie_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- /* NOTE: This is not the default position! */
- if (!vendor || !device)
- pci_write_config32(dev, 0x94, pci_read_config32(dev, 0));
- else
- pci_write_config32(dev, 0x94, (device << 16) | vendor);
-}
-
static void pcie_set_L1_ss_max_latency(device_t dev, unsigned int off)
{
- /* Set max snoop and non-snoop latency for Broadwell */
+ /* Set max snoop and non-snoop latency for the SOC */
pci_mmio_write_config32(dev, off, 0x10031003);
}
static struct pci_operations pcie_ops = {
- .set_subsystem = pcie_set_subsystem,
.set_L1_ss_latency = pcie_set_L1_ss_max_latency,
};
@@ -690,16 +91,15 @@ static struct device_operations device_ops = {
.set_resources = pci_dev_set_resources,
.enable_resources = pci_bus_enable_resources,
.init = pch_pcie_init,
- .enable = pch_pcie_enable,
+ .enable = NULL,
.scan_bus = pciexp_scan_bridge,
.ops_pci = &pcie_ops,
};
static const unsigned short pcie_device_ids[] = {
- /* Lynxpoint-LP */
- 0x9c10, 0x9c12, 0x9c14, 0x9c16, 0x9c18, 0x9c1a,
- /* WildcatPoint */
- 0x9c90, 0x9c92, 0x9c94, 0x9c96, 0x9c98, 0x9c9a, 0x2448,
+ /* Sunrisepoint-LP */
+ 0x9d10, 0x9d11, 0x9d12, 0x9d13, 0x9d14, 0x9d15, 0x9d16, 0x9d17,
+ 0x9d18, 0x9d19, 0x9d1a, 0x9d1b,
0
};
diff --git a/src/soc/intel/skylake/pcr.c b/src/soc/intel/skylake/pcr.c
new file mode 100644
index 0000000000..33d6cd12f5
--- /dev/null
+++ b/src/soc/intel/skylake/pcr.c
@@ -0,0 +1,162 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <soc/pcr.h>
+#include <soc/iomap.h>
+#include <console/console.h>
+
+/*
+ * Read PCR register. (This is internal function)
+ * It returns PCR register and size in 1/2/4 bytes.
+ * The offset should not exceed 0xFFFF and must be aligned with size
+ *
+ * PCH_SBI_PID defines as 8 bit Port ID that will be used when sending
+ * transaction to sideband.
+ */
+static u8 pch_pcr_read(PCH_SBI_PID pid, u16 offset, u32 size, void *data)
+{
+ if ((offset & (size - 1)) != 0) {
+ printk(BIOS_DEBUG,
+ "PchPcrRead error. Invalid Offset: %x Size: %x",
+ offset, size);
+ return -1;
+ }
+ switch (size) {
+ case 4:
+ *(u32 *) data = read32(PCH_PCR_ADDRESS(pid, offset));
+ break;
+ case 2:
+ *(u16 *) data = read16(PCH_PCR_ADDRESS(pid, offset));
+ break;
+ case 1:
+ *(u8 *) data = read8(PCH_PCR_ADDRESS(pid, offset));
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+u8 pcr_read32(PCH_SBI_PID pid, u16 offset, u32 *outdata)
+{
+ return pch_pcr_read(pid, offset, sizeof(u32), (u32 *)outdata);
+}
+
+u8 pcr_read16(PCH_SBI_PID pid, u16 offset, u16 *outdata)
+{
+ return pch_pcr_read(pid, offset, sizeof(u16), (u32 *)outdata);
+}
+
+u8 pcr_read8(PCH_SBI_PID pid, u16 offset, u8 *outdata)
+{
+ return pch_pcr_read(pid, offset, sizeof(u8), (u32 *)outdata);
+}
+
+/*
+ * Write PCR register. (This is internal function)
+ * It returns PCR register and size in 1/2/4 bytes.
+ * The offset should not exceed 0xFFFF and must be aligned with size
+ *
+ * PCH_SBI_PID defines as 8 bit Port ID that will be used when sending
+ * transaction to sideband.
+ */
+static u8 pch_pcr_write(PCH_SBI_PID pid, u16 offset, u32 size, u32 data)
+{
+ if ((offset & (size - 1)) != 0) {
+ printk(BIOS_DEBUG,
+ "PchPcrWrite error. Invalid Offset: %x Size: %x",
+ offset, size);
+ return -1;
+ }
+ /* Write the PCR register with provided data
+ * Then read back PCR register to prevent from back to back write.
+ */
+ switch (size) {
+ case 4:
+ write32(PCH_PCR_ADDRESS(pid, offset), (u32) data);
+ break;
+ case 2:
+ write16(PCH_PCR_ADDRESS(pid, offset), (u16) data);
+ break;
+ case 1:
+ write8(PCH_PCR_ADDRESS(pid, offset), (u8) data);
+ break;
+ default:
+ break;
+ }
+ read32(PCH_PCR_ADDRESS(PID_LPC, R_PCH_PCR_LPC_GCFD));
+
+ return 0;
+}
+
+u8 pcr_write32(PCH_SBI_PID pid, u16 offset, u32 indata)
+{
+ return pch_pcr_write(pid, offset, sizeof(u32), indata);
+}
+
+u8 pcr_write16(PCH_SBI_PID pid, u16 offset, u16 indata)
+{
+ return pch_pcr_write(pid, offset, sizeof(u16), indata);
+}
+
+u8 pcr_write8(PCH_SBI_PID pid, u16 offset, u8 indata)
+{
+ return pch_pcr_write(pid, offset, sizeof(u8), indata);
+}
+
+/*
+ * Write PCR register. (This is internal function)
+ * It programs PCR register and size in 1/2/4 bytes.
+ * The offset should not exceed 0xFFFF and must be aligned with size
+ *
+ * PCH_SBI_PID defines as 8 bit Port ID that will be used when sending
+ * transaction to sideband.
+ */
+static u8 pcr_and_then_or(PCH_SBI_PID pid, u16 offset, u32 size, u32 anddata,
+ u32 ordata)
+{
+ u8 status;
+ u32 data32;
+
+ status = pch_pcr_read(pid, offset, size, &data32);
+ if (status != 0)
+ return -1;
+
+ data32 &= anddata;
+ data32 |= ordata;
+
+ status = pch_pcr_write(pid, offset, size, data32);
+ return status;
+}
+
+u8 pcr_andthenor32(PCH_SBI_PID pid, u16 offset, u32 anddata, u32 ordata)
+{
+ return pcr_and_then_or(pid, offset, sizeof(u32), anddata, ordata);
+}
+
+u8 pcr_andthenor16(PCH_SBI_PID pid, u16 offset, u16 anddata, u16 ordata)
+{
+ return pcr_and_then_or(pid, offset, sizeof(u16), anddata, ordata);
+}
+
+u8 pcr_andthenor8(PCH_SBI_PID pid, u16 offset, u8 anddata, u8 ordata)
+{
+ return pcr_and_then_or(pid, offset, sizeof(u8), anddata, ordata);
+}
diff --git a/src/soc/intel/skylake/pei_data.c b/src/soc/intel/skylake/pei_data.c
index 180f0caf8e..b943224cdc 100644
--- a/src/soc/intel/skylake/pei_data.c
+++ b/src/soc/intel/skylake/pei_data.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,12 +15,13 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
+#include <console/console.h>
+#include <console/streams.h>
#include <stdlib.h>
#include <stdint.h>
-#include <console/streams.h>
#include <soc/iomap.h>
#include <soc/pei_data.h>
#include <soc/pei_wrapper.h>
@@ -30,18 +32,15 @@ static void ABI_X86 send_to_console(unsigned char b)
console_tx_byte(b);
}
-void broadwell_fill_pei_data(struct pei_data *pei_data)
+void soc_fill_pei_data(struct pei_data *pei_data)
{
pei_data->pei_version = PEI_VERSION;
pei_data->board_type = BOARD_TYPE_ULT;
- pei_data->usbdebug = CONFIG_USBDEBUG;
pei_data->pciexbar = MCFG_BASE_ADDRESS;
pei_data->smbusbar = SMBUS_BASE_ADDRESS;
- pei_data->ehcibar = EARLY_EHCI_BAR;
pei_data->xhcibar = EARLY_XHCI_BAR;
pei_data->gttbar = EARLY_GTT_BAR;
pei_data->pmbase = ACPI_BASE_ADDRESS;
- pei_data->gpiobase = GPIO_BASE_ADDRESS;
pei_data->tseg_size = smm_region_size();
pei_data->temp_mmio_base = EARLY_TEMP_MMIO;
pei_data->tx_byte = &send_to_console;
diff --git a/src/soc/intel/skylake/pmc.c b/src/soc/intel/skylake/pmc.c
new file mode 100644
index 0000000000..934c1300af
--- /dev/null
+++ b/src/soc/intel/skylake/pmc.c
@@ -0,0 +1,254 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <chip.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include <arch/acpi.h>
+#include <cpu/cpu.h>
+#include <pc80/mc146818rtc.h>
+#include <reg_script.h>
+#include <string.h>
+#include <soc/iomap.h>
+#include <soc/pci_devs.h>
+#include <soc/pmc.h>
+#include <soc/pm.h>
+#include <cpu/x86/smm.h>
+#include <soc/pcr.h>
+#include <soc/ramstage.h>
+#if IS_ENABLED(CONFIG_CHROMEOS)
+#include <vendorcode/google/chromeos/chromeos.h>
+#endif
+
+static const struct reg_script pch_pmc_misc_init_script[] = {
+ /* Setup SLP signal assertion, SLP_S4=4s, SLP_S3=50ms */
+ REG_PCI_RMW16(GEN_PMCON_B, ~((3 << 4)|(1 << 10)),
+ (1 << 3)|(1 << 11)|(1 << 12)),
+ REG_IO_RMW32(ACPI_BASE_ADDRESS + PM1_CNT, ~SLP_TYP, SCI_EN),
+ /* Indicate DRAM init done for MRC */
+ REG_PCI_OR8(GEN_PMCON_A, (1 << 23)),
+ REG_SCRIPT_END
+};
+
+static void pch_pmc_add_mmio_resources(device_t dev)
+{
+ struct resource *res;
+ const u32 default_decode_base = PCH_PCR_BASE_ADDRESS;
+
+ /*
+ * Till PCI enumeration happens we need to allocate the PMC base
+ * statically. Above the PCR base.
+ */
+ if (PCH_PWRM_BASE_ADDRESS < default_decode_base) {
+ res = new_resource(dev, PWRMBASE);
+ res->base = PCH_PWRM_BASE_ADDRESS;
+ /* 64KB PMC size */
+ res->size = 0x10000;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED |
+ IORESOURCE_FIXED | IORESOURCE_RESERVE;
+ }
+}
+
+static void pch_pmc_add_io_resource(device_t dev, u16 base, u16 size, int index)
+{
+ struct resource *res;
+ res = new_resource(dev, index);
+ res->base = base;
+ res->size = size;
+ res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+}
+
+static void pch_pmc_add_io_resources(device_t dev)
+{
+ /* PMBASE */
+ pch_pmc_add_io_resource(dev, ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, ABASE);
+}
+
+static void pch_pmc_read_resources(device_t dev)
+{
+ /* Get the normal PCI resources of this device. */
+ pci_dev_read_resources(dev);
+
+ /* Add non-standard MMIO resources. */
+ pch_pmc_add_mmio_resources(dev);
+
+ /* Add IO resources. */
+ pch_pmc_add_io_resources(dev);
+}
+
+static void pch_set_acpi_mode(void)
+{
+ if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER) && acpi_slp_type != 3) {
+ printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n");
+ outb(APM_CNT_ACPI_DISABLE, APM_CNT);
+ printk(BIOS_DEBUG, "done.\n");
+ }
+}
+
+#if IS_ENABLED(CONFIG_CHROMEOS_VBNV_CMOS)
+/*
+ * Preserve Vboot NV data when clearing CMOS as it will
+ * have been re-initialized already by Vboot firmware init.
+ */
+static void pch_cmos_init_preserve(int reset)
+{
+ uint8_t vbnv[CONFIG_VBNV_SIZE];
+ if (reset)
+ read_vbnv(vbnv);
+
+ cmos_init(reset);
+
+ if (reset)
+ save_vbnv(vbnv);
+}
+#endif
+
+static void pch_rtc_init(void)
+{
+ u8 reg8;
+ int rtc_failed;
+ /*PMC Controller Device 0x1F, Func 02*/
+ device_t dev = PCH_DEV_PMC;
+ reg8 = pci_read_config8(dev, GEN_PMCON_B);
+ rtc_failed = reg8 & RTC_BATTERY_DEAD;
+ if (rtc_failed) {
+ reg8 &= ~RTC_BATTERY_DEAD;
+ pci_write_config8(dev, GEN_PMCON_B, reg8);
+ printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed);
+ }
+
+#if IS_ENABLED(CONFIG_CHROMEOS_VBNV_CMOS)
+ pch_cmos_init_preserve(rtc_failed);
+#else
+ cmos_init(rtc_failed);
+#endif
+}
+
+static void pch_power_options(void)
+{
+ u16 reg16;
+ const char *state;
+ /*PMC Controller Device 0x1F, Func 02*/
+ device_t dev = PCH_DEV_PMC;
+ /* Get the chip configuration */
+ config_t *config = dev->chip_info;
+ int pwr_on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+
+ /*
+ * Which state do we want to goto after g3 (power restored)?
+ * 0 == S0 Full On
+ * 1 == S5 Soft Off
+ *
+ * If the option is not existent (Laptops), use Kconfig setting.
+ */
+ /*TODO: cmos_layout.bin need to verify; cause wrong CMOS setup*/
+ //get_option(&pwr_on, "power_on_after_fail");
+ pwr_on = MAINBOARD_POWER_ON;
+ reg16 = pci_read_config16(dev, GEN_PMCON_B);
+ reg16 &= 0xfffe;
+ switch (pwr_on) {
+ case MAINBOARD_POWER_OFF:
+ reg16 |= 1;
+ state = "off";
+ break;
+ case MAINBOARD_POWER_ON:
+ reg16 &= ~1;
+ state = "on";
+ break;
+ case MAINBOARD_POWER_KEEP:
+ reg16 &= ~1;
+ state = "state keep";
+ break;
+ default:
+ state = "undefined";
+ }
+ pci_write_config16(dev, GEN_PMCON_B, reg16);
+ printk(BIOS_INFO, "Set power %s after power failure.\n", state);
+ /* GPE setup based on device tree configuration */
+ enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2,
+ config->gpe0_en_3, config->gpe0_en_4);
+
+ /* SMI setup based on device tree configuration */
+ enable_alt_smi(config->ec_smi_gpio, config->alt_gp_smi_en);
+}
+
+static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
+{
+ uint32_t reg;
+ uint8_t *pmcbase = pmc_mmio_regs();
+
+ printk(BIOS_DEBUG, "%sabling Deep S%c\n",
+ enable ? "En" : "Dis", sx + '0');
+ reg = read32(pmcbase + offset);
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ write32(pmcbase + offset, reg);
+}
+
+static void config_deep_s5(int on)
+{
+ /* Treat S4 the same as S5. */
+ config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS | S4AC_GATE_SUS, 4, on);
+ config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS | S5AC_GATE_SUS, 5, on);
+}
+
+static void config_deep_s3(int on)
+{
+ config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS | S3AC_GATE_SUS, 3, on);
+}
+
+static void pmc_init(struct device *dev)
+{
+ config_t *config = dev->chip_info;
+
+ pch_rtc_init();
+
+ /* Initialize power management */
+ pch_power_options();
+
+ reg_script_run_on_dev(dev, pch_pmc_misc_init_script);
+ pch_set_acpi_mode();
+
+ config_deep_s3(config->deep_s3_enable);
+ config_deep_s5(config->deep_s5_enable);
+}
+
+static struct device_operations device_ops = {
+ .read_resources = &pch_pmc_read_resources,
+ .set_resources = &pci_dev_set_resources,
+ .enable_resources = &pci_dev_enable_resources,
+ .init = &pmc_init,
+ .scan_bus = &scan_lpc_bus,
+ .ops_pci = &soc_pci_ops,
+};
+
+static const unsigned short pci_device_ids[] = {
+ 0x9d21,
+ 0
+};
+
+static const struct pci_driver pch_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .devices = pci_device_ids,
+};
diff --git a/src/soc/intel/skylake/pmutil.c b/src/soc/intel/skylake/pmutil.c
index 7686387f97..c22a12083b 100644
--- a/src/soc/intel/skylake/pmutil.c
+++ b/src/soc/intel/skylake/pmutil.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
/*
@@ -27,11 +28,14 @@
#include <device/pci.h>
#include <device/pci_def.h>
#include <console/console.h>
+#include <stdlib.h>
+#include <soc/gpio.h>
#include <soc/iomap.h>
#include <soc/lpc.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
-#include <soc/gpio.h>
+#include <soc/pmc.h>
+#include <soc/smbus.h>
/* Print status bits with descriptive names */
static void print_status_bits(u32 status, const char *bit_names[])
@@ -41,7 +45,7 @@ static void print_status_bits(u32 status, const char *bit_names[])
if (!status)
return;
- for (i=31; i>=0; i--) {
+ for (i = 31; i >= 0; i--) {
if (status & (1 << i)) {
if (bit_names[i])
printk(BIOS_DEBUG, "%s ", bit_names[i]);
@@ -59,7 +63,7 @@ static void print_gpio_status(u32 status, int start)
if (!status)
return;
- for (i=31; i>=0; i--) {
+ for (i = 31; i >= 0; i--) {
if (status & (1 << i))
printk(BIOS_DEBUG, "GPIO%d ", start + i);
}
@@ -212,49 +216,53 @@ void disable_smi(u32 mask)
*/
/* Clear GPIO SMI status and return events that are enabled and active */
-static u32 reset_alt_smi_status(void)
+void reset_alt_smi_status(void)
{
- u32 alt_sts, alt_en;
-
- /* Low Power variant moves this to GPIO region as dword */
- alt_sts = inl(GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_STS);
- outl(alt_sts, GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_STS);
- alt_en = inl(GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_EN);
-
- /* Only report enabled events */
- return alt_sts & alt_en;
+ /*Clear GPIO SMI Status*/
+ clear_all_smi();
}
/* Print GPIO SMI status bits */
-static u32 print_alt_smi_status(u32 alt_sts)
+static u32 print_alt_smi_status(void)
{
- if (!alt_sts)
- return 0;
+ u32 alt_sts[GPIO_COMMUNITY_MAX];
+ int gpio_index;
+ /* GPIO Communities GPP_A ~ E support SMI */
+ const char gpiowell[] = {
+ [0] = 'A',
+ [1] = 'B',
+ [2] = 'C',
+ [3] = 'D',
+ [4] = 'E'
+ };
printk(BIOS_DEBUG, "ALT_STS: ");
-
- /* First 16 events are GPIO 32-47 */
- print_gpio_status(alt_sts & 0xffff, 32);
+ get_smi_status(alt_sts);
+ /* GPP_A to GPP_E GPIO has Status and Enable functionality*/
+ for (gpio_index = 0; gpio_index < ARRAY_SIZE(gpiowell);
+ gpio_index++) {
+ printk(BIOS_DEBUG, "GPIO Group_%c\n",
+ gpiowell[gpio_index]);
+ print_gpio_status(alt_sts[gpio_index], 0);
+ }
printk(BIOS_DEBUG, "\n");
- return alt_sts;
+ return 0;
}
/* Print, clear, and return GPIO SMI status */
u32 clear_alt_smi_status(void)
{
- return print_alt_smi_status(reset_alt_smi_status());
+ reset_alt_smi_status();
+ return print_alt_smi_status();
}
/* Enable GPIO SMI events */
-void enable_alt_smi(u32 mask)
+void enable_alt_smi(int gpionum, u32 mask)
{
- u32 alt_en;
-
- alt_en = inl(GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_EN);
- alt_en |= mask;
- outl(alt_en, GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_EN);
+ /*Set GPIO EN Status*/
+ enable_gpio_groupsmi(gpionum, mask);
}
@@ -265,18 +273,25 @@ void enable_alt_smi(u32 mask)
/* Clear TCO status and return events that are enabled and active */
static u32 reset_tco_status(void)
{
- u32 tcobase = ACPI_BASE_ADDRESS + 0x60;
- u32 tco_sts = inl(tcobase + 0x04);
- u32 tco_en = inl(ACPI_BASE_ADDRESS + 0x68);
+ u16 tco1_sts;
+ u16 tco2_sts;
+ u16 tcobase;
+
+ tcobase = pmc_tco_regs();
+
+ /* TCO Status 2 register*/
+ tco2_sts = inw(tcobase + TCO2_STS);
+ tco2_sts |= (TCO2_STS_SECOND_TO | TCO2_STS_BOOT);
+ outw(tco2_sts, tcobase + TCO2_STS);
- /* Don't clear BOOT_STS before SECOND_TO_STS */
- outl(tco_sts & ~(1 << 18), tcobase + 0x04);
+ /* TCO Status 1 register*/
+ tco1_sts = inw(tcobase + TCO1_STS);
- /* Clear BOOT_STS */
- if (tco_sts & (1 << 18))
- outl(tco_sts & (1 << 18), tcobase + 0x04);
+ /* Clear SECOND_TO_STS bit */
+ if (tco2_sts & TCO2_STS_SECOND_TO)
+ outw(tco2_sts & ~TCO2_STS_SECOND_TO, tcobase + TCO2_STS);
- return tco_sts & tco_en;
+ return (tco2_sts << 16) | tco1_sts;
}
/* Print TCO status bits */
@@ -319,7 +334,7 @@ u32 clear_tco_status(void)
void enable_tco_sci(void)
{
/* Clear pending events */
- outl(ACPI_BASE_ADDRESS + GPE0_STS(3), TCOSCI_STS);
+ outl(TCOSCI_STS, ACPI_BASE_ADDRESS + GPE0_STS(3));
/* Enable TCO SCI events */
enable_gpe(TCOSCI_EN);
@@ -425,7 +440,7 @@ void disable_gpe(u32 mask)
int acpi_sci_irq(void)
{
- int scis = pci_read_config32(PCH_DEV_LPC, ACPI_CNTL) & SCI_IRQ_SEL;
+ int scis = pci_read_config32(PCH_DEV_PMC, ACTL) & SCI_IRQ_SEL;
int sci_irq = 9;
/* Determine how SCI is routed. */
@@ -450,3 +465,26 @@ int acpi_sci_irq(void)
printk(BIOS_DEBUG, "SCI is IRQ%d\n", sci_irq);
return sci_irq;
}
+
+uint8_t *pmc_mmio_regs(void)
+{
+ uint32_t reg32;
+
+ reg32 = pci_read_config32(PCH_DEV_PMC, PWRMBASE);
+
+ /* 4KiB alignment. */
+ reg32 &= ~0xfff;
+
+ return (void *)(uintptr_t)reg32;
+}
+
+uint16_t pmc_tco_regs(void)
+{
+ uint16_t reg16;
+
+ reg16 = pci_read_config16(PCH_DEV_SMBUS, TCOBASE);
+
+ reg16 &= ~0x1f;
+
+ return reg16;
+}
diff --git a/src/soc/intel/skylake/ramstage.c b/src/soc/intel/skylake/ramstage.c
index eaa28d02f1..51e9b31d65 100644
--- a/src/soc/intel/skylake/ramstage.c
+++ b/src/soc/intel/skylake/ramstage.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,87 +15,17 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#include <arch/acpi.h>
-#include <cbmem.h>
+#include <bootstate.h>
#include <console/console.h>
-#include <device/device.h>
-#include <stdlib.h>
-#include <string.h>
-#include <soc/nvs.h>
-#include <soc/pm.h>
+#include <fsp_util.h>
#include <soc/ramstage.h>
-#include <soc/intel/broadwell/chip.h>
+#include <soc/intel/common/ramstage.h>
-/* Save bit index for PM1_STS and GPE_STS for ACPI _SWS */
-static void save_acpi_wake_source(global_nvs_t *gnvs)
+void soc_init_pre_device(void *chip_info)
{
- struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE);
- uint16_t pm1;
- int gpe_reg;
-
- if (!ps)
- return;
-
- pm1 = ps->pm1_sts & ps->pm1_en;
-
- /* Scan for first set bit in PM1 */
- for (gnvs->pm1i = 0; gnvs->pm1i < 16; gnvs->pm1i++) {
- if (pm1 & 1)
- break;
- pm1 >>= 1;
- }
-
- /* If unable to determine then return -1 */
- if (gnvs->pm1i >= 16)
- gnvs->pm1i = -1;
-
- /* Scan for first set bit in GPE registers */
- gnvs->gpei = -1;
- for (gpe_reg = 0; gpe_reg < GPE0_REG_MAX; gpe_reg++) {
- u32 gpe = ps->gpe0_sts[gpe_reg] & ps->gpe0_en[gpe_reg];
- int start = gpe_reg * GPE0_REG_SIZE;
- int end = start + GPE0_REG_SIZE;
-
- if (gpe == 0) {
- if (!gnvs->gpei)
- gnvs->gpei = end;
- continue;
- }
-
- for (gnvs->gpei = start; gnvs->gpei < end; gnvs->gpei++) {
- if (gpe & 1)
- break;
- gpe >>= 1;
- }
- }
-
- /* If unable to determine then return -1 */
- if (gnvs->gpei >= (GPE0_REG_MAX * GPE0_REG_SIZE))
- gnvs->gpei = -1;
-
- printk(BIOS_DEBUG, "ACPI _SWS is PM1 Index %lld GPE Index %lld\n",
- gnvs->pm1i, gnvs->gpei);
-}
-
-static void s3_resume_prepare(void)
-{
- global_nvs_t *gnvs;
-
- gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof(global_nvs_t));
- if (gnvs == NULL)
- return;
-
- if (!acpi_is_wakeup_s3())
- memset(gnvs, 0, sizeof(global_nvs_t));
- else
- save_acpi_wake_source(gnvs);
-}
-
-void broadwell_init_pre_device(void *chip_info)
-{
- s3_resume_prepare();
- broadwell_run_reference_code();
+ /* Perform silicon specific init. */
+ intel_silicon_init();
}
diff --git a/src/soc/intel/skylake/refcode.c b/src/soc/intel/skylake/refcode.c
deleted file mode 100644
index 201825a93b..0000000000
--- a/src/soc/intel/skylake/refcode.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <string.h>
-#include <arch/acpi.h>
-#include <cbmem.h>
-#include <console/console.h>
-#include <console/streams.h>
-#include <cpu/x86/tsc.h>
-#include <program_loading.h>
-#include <rmodule.h>
-#include <stage_cache.h>
-#include <string.h>
-#if IS_ENABLED(CONFIG_CHROMEOS)
-#include <vendorcode/google/chromeos/vboot_handoff.h>
-#endif
-#include <soc/pei_data.h>
-#include <soc/pei_wrapper.h>
-#include <soc/ramstage.h>
-
-static pei_wrapper_entry_t load_refcode_from_cache(void)
-{
- struct prog refcode;
-
- printk(BIOS_DEBUG, "refcode loading from cache.\n");
-
- stage_cache_load_stage(STAGE_REFCODE, &refcode);
-
- return (pei_wrapper_entry_t)prog_entry(&refcode);
-}
-
-static void cache_refcode(const struct rmod_stage_load *rsl)
-{
- stage_cache_add(STAGE_REFCODE, rsl->prog);
-}
-
-#if IS_ENABLED(CONFIG_CHROMEOS)
-static int load_refcode_from_vboot(struct rmod_stage_load *refcode)
-{
- struct vboot_handoff *vboot_handoff;
- const struct firmware_component *fwc;
- struct cbfs_stage *stage;
-
- vboot_handoff = cbmem_find(CBMEM_ID_VBOOT_HANDOFF);
- fwc = &vboot_handoff->components[CONFIG_VBOOT_REFCODE_INDEX];
-
- if (vboot_handoff == NULL ||
- vboot_handoff->selected_firmware == VB_SELECT_FIRMWARE_READONLY ||
- CONFIG_VBOOT_REFCODE_INDEX >= MAX_PARSED_FW_COMPONENTS ||
- fwc->size == 0 || fwc->address == 0)
- return -1;
-
- printk(BIOS_DEBUG, "refcode loading from vboot rw area.\n");
- stage = (void *)(uintptr_t)fwc->address;
-
- if (rmodule_stage_load(refcode, stage)) {
- printk(BIOS_DEBUG, "Error loading reference code.\n");
- return -1;
- }
- return 0;
-}
-#else
-static int load_refcode_from_vboot(struct rmod_stage_load *refcode)
-{
- return -1;
-}
-#endif
-
-static int load_refcode_from_cbfs(struct rmod_stage_load *refcode)
-{
- printk(BIOS_DEBUG, "refcode loading from cbfs.\n");
-
- if (rmodule_stage_load_from_cbfs(refcode)) {
- printk(BIOS_DEBUG, "Error loading reference code.\n");
- return -1;
- }
-
- return 0;
-}
-
-static pei_wrapper_entry_t load_reference_code(void)
-{
- struct prog prog = {
- .name = CONFIG_CBFS_PREFIX "/refcode",
- };
- struct rmod_stage_load refcode = {
- .cbmem_id = CBMEM_ID_REFCODE,
- .prog = &prog,
- };
-
- if (acpi_is_wakeup_s3()) {
- return load_refcode_from_cache();
- }
-
- if (load_refcode_from_vboot(&refcode) ||
- load_refcode_from_cbfs(&refcode))
- return NULL;
-
- /* Cache loaded reference code. */
- cache_refcode(&refcode);
-
- return prog_entry(&prog);
-}
-
-void broadwell_run_reference_code(void)
-{
- int ret, dummy;
- struct pei_data pei_data;
- pei_wrapper_entry_t entry;
-
- memset(&pei_data, 0, sizeof(pei_data));
- mainboard_fill_pei_data(&pei_data);
- broadwell_fill_pei_data(&pei_data);
-
- pei_data.boot_mode = acpi_slp_type;
- pei_data.saved_data = (void *) &dummy;
-
- entry = load_reference_code();
- if (entry == NULL) {
- printk(BIOS_ERR, "Reference code not found\n");
- return;
- }
-
- /* Call into reference code. */
- ret = entry(&pei_data);
- if (ret != 0) {
- printk(BIOS_ERR, "Reference code returned %d\n", ret);
- return;
- }
-}
diff --git a/src/soc/intel/skylake/reset.c b/src/soc/intel/skylake/reset.c
deleted file mode 100644
index a56ec24df0..0000000000
--- a/src/soc/intel/skylake/reset.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <arch/io.h>
-#include <halt.h>
-#include <reset.h>
-#include <soc/reset.h>
-
-/*
- * Soft reset (INIT# to cpu) - write 0x1 to I/O 0x92
- * Soft reset (INIT# to cpu)- write 0x4 to I/0 0xcf9
- * Cold reset (S0->S5->S0) - write 0xe to I/0 0xcf9
- * Warm reset (PLTRST# assertion) - write 0x6 to I/O 0xcf9
- * Global reset (S0->S5->S0 with ME reset) - write 0x6 or 0xe to 0xcf9 but
- * with ETR[20] set.
- */
-
-void soft_reset(void)
-{
- outb(0x04, 0xcf9);
-}
-
-void hard_reset(void)
-{
- outb(0x06, 0xcf9);
-}
-
-void reset_system(void)
-{
- hard_reset();
- halt();
-}
diff --git a/src/soc/intel/skylake/romstage/Makefile.inc b/src/soc/intel/skylake/romstage/Makefile.inc
index ae0f9806fd..52029fcf78 100644
--- a/src/soc/intel/skylake/romstage/Makefile.inc
+++ b/src/soc/intel/skylake/romstage/Makefile.inc
@@ -1,13 +1,9 @@
-cpu_incs += $(src)/soc/intel/broadwell/romstage/cache_as_ram.inc
-
romstage-y += cpu.c
romstage-y += pch.c
romstage-y += power_state.c
-romstage-y += raminit.c
romstage-y += report_platform.c
romstage-y += romstage.c
romstage-y += smbus.c
romstage-y += spi.c
-romstage-y += stack.c
romstage-y += systemagent.c
-romstage-$(CONFIG_DRIVERS_UART_8250MEM) += uart.c
+romstage-$(CONFIG_INTEL_PCH_UART_CONSOLE) += uart.c
diff --git a/src/soc/intel/skylake/romstage/cache_as_ram.inc b/src/soc/intel/skylake/romstage/cache_as_ram.inc
deleted file mode 100644
index a10ca4ca1b..0000000000
--- a/src/soc/intel/skylake/romstage/cache_as_ram.inc
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com>
- * Copyright (C) 2007-2008 coresystems GmbH
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <cpu/x86/mtrr.h>
-#include <cpu/x86/cache.h>
-#include <cpu/x86/post_code.h>
-#include <cbmem.h>
-
-/* The full cache-as-ram size includes the cache-as-ram portion from coreboot
- * and the space used by the reference code. These 2 values combined should
- * be a power of 2 because the MTRR setup assumes that. */
-#define CACHE_AS_RAM_SIZE \
- (CONFIG_DCACHE_RAM_SIZE + CONFIG_DCACHE_RAM_MRC_VAR_SIZE)
-#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE
-#define CACHE_AS_RAM_LIMIT (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE)
-#define USBDEBUG_VAR_SIZE 36 /* sizeof(struct ehci_debug_info) */
-
-/* Cache 4GB - MRC_SIZE_KB for MRC */
-#define CACHE_MRC_BYTES ((CONFIG_CACHE_MRC_SIZE_KB << 10) - 1)
-#define CACHE_MRC_BASE (0xFFFFFFFF - CACHE_MRC_BYTES)
-#define CACHE_MRC_MASK (~CACHE_MRC_BYTES)
-
-#define CPU_MAXPHYSADDR CONFIG_CPU_ADDR_BITS
-#define CPU_PHYSMASK_HI (1 << (CPU_MAXPHYSADDR - 32) - 1)
-
-#define NoEvictMod_MSR 0x2e0
-
- /* Save the BIST result. */
- movl %eax, %ebp
-
-cache_as_ram:
- post_code(0x20)
-
- /* Send INIT IPI to all excluding ourself. */
- movl $0x000C4500, %eax
- movl $0xFEE00300, %esi
- movl %eax, (%esi)
-
- /* All CPUs need to be in Wait for SIPI state */
-wait_for_sipi:
- movl (%esi), %eax
- bt $12, %eax
- jc wait_for_sipi
-
- post_code(0x21)
- /* Zero out all fixed range and variable range MTRRs. */
- movl $mtrr_table, %esi
- movl $((mtrr_table_end - mtrr_table) / 2), %edi
- xorl %eax, %eax
- xorl %edx, %edx
-clear_mtrrs:
- movw (%esi), %bx
- movzx %bx, %ecx
- wrmsr
- add $2, %esi
- dec %edi
- jnz clear_mtrrs
-
- post_code(0x22)
- /* Configure the default memory type to uncacheable. */
- movl $MTRRdefType_MSR, %ecx
- rdmsr
- andl $(~0x00000cff), %eax
- wrmsr
-
- post_code(0x23)
- /* Set Cache-as-RAM base address. */
- movl $(MTRRphysBase_MSR(0)), %ecx
- movl $(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax
- xorl %edx, %edx
- wrmsr
-
- post_code(0x24)
- /* Set Cache-as-RAM mask. */
- movl $(MTRRphysMask_MSR(0)), %ecx
- movl $(~(CACHE_AS_RAM_SIZE - 1) | MTRRphysMaskValid), %eax
- movl $CPU_PHYSMASK_HI, %edx
- wrmsr
-
- post_code(0x25)
-
- /* Enable MTRR. */
- movl $MTRRdefType_MSR, %ecx
- rdmsr
- orl $MTRRdefTypeEn, %eax
- wrmsr
-
- /* Enable cache (CR0.CD = 0, CR0.NW = 0). */
- movl %cr0, %eax
- andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax
- invd
- movl %eax, %cr0
-
- /* enable the 'no eviction' mode */
- movl $NoEvictMod_MSR, %ecx
- rdmsr
- orl $1, %eax
- andl $~2, %eax
- wrmsr
-
- /* Clear the cache memory region. This will also fill up the cache */
- movl $CACHE_AS_RAM_BASE, %esi
- movl %esi, %edi
- movl $(CACHE_AS_RAM_SIZE / 4), %ecx
- xorl %eax, %eax
- rep stosl
-
- /* enable the 'no eviction run' state */
- movl $NoEvictMod_MSR, %ecx
- rdmsr
- orl $3, %eax
- wrmsr
-
- post_code(0x26)
- /* Enable Cache-as-RAM mode by disabling cache. */
- movl %cr0, %eax
- orl $CR0_CacheDisable, %eax
- movl %eax, %cr0
-
- /* Enable cache for our code in Flash because we do XIP here */
- movl $MTRRphysBase_MSR(1), %ecx
- xorl %edx, %edx
- /*
- * IMPORTANT: The following calculation _must_ be done at runtime. See
- * http://www.coreboot.org/pipermail/coreboot/2010-October/060855.html
- */
- movl $copy_and_run, %eax
- andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax
- orl $MTRR_TYPE_WRPROT, %eax
- wrmsr
-
- movl $MTRRphysMask_MSR(1), %ecx
- movl $CPU_PHYSMASK_HI, %edx
- movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRRphysMaskValid), %eax
- wrmsr
-
- post_code(0x27)
-#if CONFIG_CACHE_MRC_BIN
- /* Enable caching for ram init code to run faster */
- movl $MTRRphysBase_MSR(2), %ecx
- movl $(CACHE_MRC_BASE | MTRR_TYPE_WRPROT), %eax
- xorl %edx, %edx
- wrmsr
- movl $MTRRphysMask_MSR(2), %ecx
- movl $(CACHE_MRC_MASK | MTRRphysMaskValid), %eax
- movl $CPU_PHYSMASK_HI, %edx
- wrmsr
-#endif
-
- post_code(0x28)
- /* Enable cache. */
- movl %cr0, %eax
- andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax
- movl %eax, %cr0
-
- /* Setup the stack. */
- movl $(CACHE_AS_RAM_LIMIT), %eax
-#if CONFIG_USBDEBUG
- sub $(USBDEBUG_VAR_SIZE), %eax
-#endif
- movl %eax, %esp
-
- /* Restore the BIST result. */
- movl %ebp, %eax
-
- /* Build the call frame. */
- movl %esp, %ebp
- movd %mm1, %ebx
- pushl %ebx
- movd %mm0, %ebx
- pushl %ebx
- pushl %eax
-
-before_romstage:
- post_code(0x29)
- /* Call romstage.c main function. */
- call romstage_main
- /* Save return value from romstage_main. It contains the stack to use
- * after cache-as-ram is torn down. It also contains the information
- * for setting up MTRRs. */
- movl %eax, %ebx
-
- post_code(0x2f)
-
- /* Copy global variable space (for USBDEBUG) to memory */
-#if CONFIG_USBDEBUG
- cld
- movl $(CACHE_AS_RAM_LIMIT - USBDEBUG_VAR_SIZE), %esi
- movl $(CONFIG_RAMTOP - USBDEBUG_VAR_SIZE), %edi
- movl $USBDEBUG_VAR_SIZE, %ecx
- rep movsb
-#endif
-
- post_code(0x30)
-
- /* Disable cache. */
- movl %cr0, %eax
- orl $CR0_CacheDisable, %eax
- movl %eax, %cr0
-
- post_code(0x31)
-
- /* Disable MTRR. */
- movl $MTRRdefType_MSR, %ecx
- rdmsr
- andl $(~MTRRdefTypeEn), %eax
- wrmsr
-
- post_code(0x31)
-
- /* Disable the no eviction run state */
- movl $NoEvictMod_MSR, %ecx
- rdmsr
- andl $~2, %eax
- wrmsr
-
- invd
-
- /* Disable the no eviction mode */
- rdmsr
- andl $~1, %eax
- wrmsr
-
-#if CONFIG_CACHE_MRC_BIN
- /* Clear MTRR that was used to cache MRC */
- xorl %eax, %eax
- xorl %edx, %edx
- movl $MTRRphysBase_MSR(2), %ecx
- wrmsr
- movl $MTRRphysMask_MSR(2), %ecx
- wrmsr
-#endif
-
- post_code(0x33)
-
- /* Enable cache. */
- movl %cr0, %eax
- andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax
- movl %eax, %cr0
-
- post_code(0x36)
-
- /* Disable cache. */
- movl %cr0, %eax
- orl $CR0_CacheDisable, %eax
- movl %eax, %cr0
-
- post_code(0x38)
-
- /* Setup stack as indicated by return value from ramstage_main(). */
- movl %ebx, %esp
-
- /* Get number of MTRRs. */
- popl %ebx
- movl $MTRRphysBase_MSR(0), %ecx
-1:
- testl %ebx, %ebx
- jz 1f
-
- /* Low 32 bits of MTRR base. */
- popl %eax
- /* Upper 32 bits of MTRR base. */
- popl %edx
- /* Write MTRR base. */
- wrmsr
- inc %ecx
- /* Low 32 bits of MTRR mask. */
- popl %eax
- /* Upper 32 bits of MTRR mask. */
- popl %edx
- /* Write MTRR mask. */
- wrmsr
- inc %ecx
-
- dec %ebx
- jmp 1b
-1:
- post_code(0x39)
-
- /* And enable cache again after setting MTRRs. */
- movl %cr0, %eax
- andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax
- movl %eax, %cr0
-
- post_code(0x3a)
-
- /* Enable MTRR. */
- movl $MTRRdefType_MSR, %ecx
- rdmsr
- orl $MTRRdefTypeEn, %eax
- wrmsr
-
- post_code(0x3b)
-
- /* Invalidate the cache again. */
- invd
-
- post_code(0x3c)
-
-__main:
- post_code(POST_PREPARE_RAMSTAGE)
- cld /* Clear direction flag. */
- call romstage_after_car
-
-.Lhlt:
- post_code(POST_DEAD_CODE)
- hlt
- jmp .Lhlt
-
-mtrr_table:
- /* Fixed MTRRs */
- .word 0x250, 0x258, 0x259
- .word 0x268, 0x269, 0x26A
- .word 0x26B, 0x26C, 0x26D
- .word 0x26E, 0x26F
- /* Variable MTRRs */
- .word 0x200, 0x201, 0x202, 0x203
- .word 0x204, 0x205, 0x206, 0x207
- .word 0x208, 0x209, 0x20A, 0x20B
- .word 0x20C, 0x20D, 0x20E, 0x20F
- .word 0x210, 0x211, 0x212, 0x213
-mtrr_table_end:
-
diff --git a/src/soc/intel/skylake/romstage/cpu.c b/src/soc/intel/skylake/romstage/cpu.c
index af175be86f..ba472a9d78 100644
--- a/src/soc/intel/skylake/romstage/cpu.c
+++ b/src/soc/intel/skylake/romstage/cpu.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/cpu.h>
@@ -34,7 +35,7 @@ void set_max_freq(void)
{
msr_t msr, perf_ctl, platform_info;
- /* Check for configurable TDP option */
+ /* Check for configurable TDP option */
platform_info = rdmsr(MSR_PLATFORM_INFO);
if ((platform_info.hi >> 1) & 3) {
@@ -51,5 +52,5 @@ void set_max_freq(void)
wrmsr(IA32_PERF_CTL, perf_ctl);
printk(BIOS_DEBUG, "CPU: frequency set to %d MHz\n",
- ((perf_ctl.lo >> 8) & 0xff) * CPU_BCLK);
+ ((perf_ctl.lo >> 8) & 0xff) * CPU_BCLK);
}
diff --git a/src/soc/intel/skylake/romstage/pch.c b/src/soc/intel/skylake/romstage/pch.c
index 6fa6c395e2..9ca83b3aaa 100644
--- a/src/soc/intel/skylake/romstage/pch.c
+++ b/src/soc/intel/skylake/romstage/pch.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,10 +15,11 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/io.h>
+#include <chip.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci_def.h>
@@ -25,97 +27,25 @@
#include <soc/iomap.h>
#include <soc/lpc.h>
#include <soc/pch.h>
+#include <soc/pcr.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
-#include <soc/rcba.h>
+#include <soc/pmc.h>
#include <soc/romstage.h>
#include <soc/smbus.h>
-#include <soc/intel/broadwell/chip.h>
-
-const struct reg_script pch_early_init_script[] = {
- /* Setup southbridge BARs */
- REG_PCI_WRITE32(RCBA, RCBA_BASE_ADDRESS | 1),
- REG_PCI_WRITE32(PMBASE, ACPI_BASE_ADDRESS | 1),
- REG_PCI_WRITE8(ACPI_CNTL, ACPI_EN),
- REG_PCI_WRITE32(GPIO_BASE, GPIO_BASE_ADDRESS | 1),
- REG_PCI_WRITE8(GPIO_CNTL, GPIO_EN),
-
- /* Set COM1/COM2 decode range */
- REG_PCI_WRITE16(LPC_IO_DEC, 0x0010),
- /* Enable legacy decode ranges */
- REG_PCI_WRITE16(LPC_EN, CNF1_LPC_EN | CNF2_LPC_EN | GAMEL_LPC_EN |
- COMA_LPC_EN | KBC_LPC_EN | MC_LPC_EN),
-
- /* Enable IOAPIC */
- REG_MMIO_WRITE16(RCBA_BASE_ADDRESS + OIC, 0x0100),
- /* Read back for posted write */
- REG_MMIO_READ16(RCBA_BASE_ADDRESS + OIC),
-
- /* Set HPET address and enable it */
- REG_MMIO_RMW32(RCBA_BASE_ADDRESS + HPTC, ~3, (1 << 7)),
- /* Read back for posted write */
- REG_MMIO_READ32(RCBA_BASE_ADDRESS + HPTC),
- /* Enable HPET to start counter */
- REG_MMIO_OR32(HPET_BASE_ADDRESS + 0x10, (1 << 0)),
-
- /* Disable reset */
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + GCS, (1 << 5)),
- /* TCO timer halt */
- REG_IO_OR16(ACPI_BASE_ADDRESS + TCO1_CNT, TCO_TMR_HLT),
-
- /* Enable upper 128 bytes of CMOS */
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + RC, (1 << 2)),
-
- /* Disable unused device (always) */
- REG_MMIO_OR32(RCBA_BASE_ADDRESS + FD, PCH_DISABLE_ALWAYS),
-
- REG_SCRIPT_END
-};
-const struct reg_script pch_interrupt_init_script[] = {
- /*
- * GFX INTA -> PIRQA (MSI)
- * D28IP_P1IP PCIE INTA -> PIRQA
- * D29IP_E1P EHCI INTA -> PIRQD
- * D20IP_XHCI XHCI INTA -> PIRQC (MSI)
- * D31IP_SIP SATA INTA -> PIRQF (MSI)
- * D31IP_SMIP SMBUS INTB -> PIRQG
- * D31IP_TTIP THRT INTC -> PIRQA
- * D27IP_ZIP HDA INTA -> PIRQG (MSI)
- */
-
- /* Device interrupt pin register (board specific) */
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D31IP,
- (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
- (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D29IP, (INTA << D29IP_E1P)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D28IP,
- (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) |
- (INTB << D28IP_P4IP)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D27IP, (INTA << D27IP_ZIP)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D26IP, (INTA << D26IP_E2P)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D22IP, (NOINT << D22IP_MEI1IP)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D20IP, (INTA << D20IP_XHCI)),
-
- /* Device interrupt route registers */
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D31IR, /* LPC */
- DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D29IR, /* EHCI */
- DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D28IR, /* PCIE */
- DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D27IR, /* HDA */
- DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D22IR, /* ME */
- DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D21IR, /* SIO */
- DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D20IR, /* XHCI */
- DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)),
- REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D23IR, /* SDIO */
- DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)),
-
- REG_SCRIPT_END
+/* Max PXRC registers in ITSS*/
+#define MAX_PXRC_CONFIG 0x08
+
+static const u8 pch_interrupt_routing[] = {
+ 11, /* PARC: PIRQA -> IRQ11 */
+ 10, /* PBRC: PIRQB -> IRQ10 */
+ 11, /* PCRC: PIRQC -> IRQ11 */
+ 11, /* PDRC: PIRQD -> IRQ11 */
+ 11, /* PERC: PIRQE -> IRQ11 */
+ 11, /* PFRC: PIRQF -> IRQ11 */
+ 11, /* PGRC: PIRQG -> IRQ11 */
+ 11 /* PHRC: PIRQH -> IRQ11 */
};
static void pch_enable_lpc(void)
@@ -123,39 +53,85 @@ static void pch_enable_lpc(void)
/* Lookup device tree in romstage */
const struct device *dev;
const config_t *config;
+ u16 lpc_en;
+
+ /* IO Decode Range */
+ lpc_en = COMA_RANGE | (COMB_RANGE << 4);
+ pci_write_config16(PCH_DEV_LPC, LPC_IO_DEC, lpc_en);
+ pcr_write16(PID_DMI, R_PCH_PCR_DMI_LPCIOD, lpc_en);
+
+ /* IO Decode Enable */
+ lpc_en = CNF1_LPC_EN | CNF2_LPC_EN | GAMEL_LPC_EN | GAMEH_LPC_EN |
+ COMA_LPC_EN | KBC_LPC_EN | MC_LPC_EN;
+ pci_write_config16(PCH_DEV_LPC, LPC_EN, lpc_en);
+ pcr_write16(PID_DMI, R_PCH_PCR_DMI_LPCIOE, lpc_en);
dev = dev_find_slot(0, PCI_DEVFN(PCH_DEV_SLOT_LPC, 0));
if (!dev || !dev->chip_info)
return;
config = dev->chip_info;
+ /* Set in PCI generic decode range registers */
pci_write_config32(PCH_DEV_LPC, LPC_GEN1_DEC, config->gen1_dec);
pci_write_config32(PCH_DEV_LPC, LPC_GEN2_DEC, config->gen2_dec);
pci_write_config32(PCH_DEV_LPC, LPC_GEN3_DEC, config->gen3_dec);
pci_write_config32(PCH_DEV_LPC, LPC_GEN4_DEC, config->gen4_dec);
+
+ /* Mirror these same settings in DMI PCR */
+ pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR1, config->gen1_dec);
+ pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR2, config->gen2_dec);
+ pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR3, config->gen3_dec);
+ pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR4, config->gen4_dec);
}
-static void pcie_update_cfg(device_t dev, int reg, u32 mask, u32 or)
+static void pch_device_init(void)
{
+ device_t dev;
u32 reg32;
+ u16 tcobase;
+ u16 tcocnt;
+
+ dev = PCH_DEV_PMC;
- reg32 = pci_read_config32(dev, reg);
- reg32 &= mask;
- reg32 |= or;
- pci_write_config32(dev, reg, reg32);
+ /* Enable ACPI and PMC mmio regs in PMC Config */
+ reg32 = pci_read_config32(dev, ACTL);
+ reg32 |= ACPI_EN | PWRM_EN;
+ pci_write_config32(dev, ACTL, reg32);
+
+ /* TCO timer halt */
+ tcobase = pmc_tco_regs();
+ tcocnt = inw(tcobase + TCO1_CNT);
+ tcocnt |= TCO_TMR_HLT;
+ outw(tcocnt, tcobase + TCO1_CNT);
+
+ /* Enable upper 128 bytes of CMOS */
+ pcr_andthenor32(PID_RTC, R_PCH_PCR_RTC_CONF, (u32)~0,
+ B_PCH_PCR_RTC_CONF_UCMOS_EN);
+}
+
+static void pch_interrupt_init(void)
+{
+ u8 index = 0;
+
+ for (index = 0; index < MAX_PXRC_CONFIG; index++) {
+ if (pch_interrupt_routing[index] < 16 &&
+ pch_interrupt_routing[index] > 2 &&
+ pch_interrupt_routing[index] != 8 &&
+ pch_interrupt_routing[index] != 13) {
+ pcr_write8(PID_ITSS,
+ (R_PCH_PCR_ITSS_PIRQA_ROUT + index),
+ pch_interrupt_routing[index]);
+ }
+ }
}
void pch_early_init(void)
{
- reg_script_run_on_dev(PCH_DEV_LPC, pch_early_init_script);
- reg_script_run_on_dev(PCH_DEV_LPC, pch_interrupt_init_script);
+ pch_device_init();
+
+ pch_interrupt_init();
pch_enable_lpc();
enable_smbus();
-
- /* 8.14 Additional PCI Express Programming Steps, step #1 */
- pcie_update_cfg(_PCH_DEV(PCIE, 0), 0xf4, ~0x60, 0);
- pcie_update_cfg(_PCH_DEV(PCIE, 0), 0xf4, ~0x80, 0x80);
- pcie_update_cfg(_PCH_DEV(PCIE, 0), 0xe2, ~0x30, 0x30);
}
diff --git a/src/soc/intel/skylake/romstage/power_state.c b/src/soc/intel/skylake/romstage/power_state.c
index bdb3da9c3b..7a6c8b3960 100644
--- a/src/soc/intel/skylake/romstage/power_state.c
+++ b/src/soc/intel/skylake/romstage/power_state.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/early_variables.h>
@@ -29,14 +30,14 @@
#include <stdlib.h>
#include <string.h>
#include <soc/iomap.h>
-#include <soc/lpc.h>
+#include <soc/pmc.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
#include <soc/romstage.h>
static struct chipset_power_state power_state CAR_GLOBAL;
-static void migrate_power_state(void)
+static void migrate_power_state(int is_recovery)
{
struct chipset_power_state *ps_cbmem;
struct chipset_power_state *ps_car;
@@ -50,7 +51,7 @@ static void migrate_power_state(void)
}
memcpy(ps_cbmem, ps_car, sizeof(*ps_cbmem));
}
-CAR_MIGRATE(migrate_power_state);
+ROMSTAGE_CBMEM_INIT_HOOK(migrate_power_state)
/* Return 0, 3, or 5 to indicate the previous sleep state. */
static int prev_sleep_state(struct chipset_power_state *ps)
@@ -60,7 +61,7 @@ static int prev_sleep_state(struct chipset_power_state *ps)
if (ps->pm1_sts & WAK_STS) {
switch ((ps->pm1_cnt & SLP_TYP) >> SLP_TYP_SHIFT) {
-#if CONFIG_HAVE_ACPI_RESUME
+#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME)
case SLP_TYP_S3:
prev_sleep_state = SLEEP_STATE_S3;
break;
@@ -73,7 +74,7 @@ static int prev_sleep_state(struct chipset_power_state *ps)
outl(ps->pm1_cnt & ~(SLP_TYP), ACPI_BASE_ADDRESS + PM1_CNT);
}
- if (ps->gen_pmcon3 & (PWR_FLR | SUS_PWR_FLR))
+ if (ps->gen_pmcon_b & (PWR_FLR | SUS_PWR_FLR))
prev_sleep_state = SLEEP_STATE_S5;
return prev_sleep_state;
@@ -94,8 +95,8 @@ static void dump_power_state(struct chipset_power_state *ps)
ps->gpe0_en[0], ps->gpe0_en[1],
ps->gpe0_en[2], ps->gpe0_en[3]);
- printk(BIOS_DEBUG, "GEN_PMCON: %04x %04x %04x\n",
- ps->gen_pmcon1, ps->gen_pmcon2, ps->gen_pmcon3);
+ printk(BIOS_DEBUG, "GEN_PMCON: %04x %04x\n",
+ ps->gen_pmcon_a, ps->gen_pmcon_b);
printk(BIOS_DEBUG, "Previous Sleep State: S%d\n",
ps->prev_sleep_state);
@@ -104,13 +105,16 @@ static void dump_power_state(struct chipset_power_state *ps)
/* Fill power state structure from ACPI PM registers */
struct chipset_power_state *fill_power_state(void)
{
+ uint16_t tcobase;
struct chipset_power_state *ps = car_get_var_ptr(&power_state);
+ tcobase = pmc_tco_regs();
+
ps->pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS);
ps->pm1_en = inw(ACPI_BASE_ADDRESS + PM1_EN);
ps->pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT);
- ps->tco1_sts = inw(ACPI_BASE_ADDRESS + TCO1_STS);
- ps->tco2_sts = inw(ACPI_BASE_ADDRESS + TCO2_STS);
+ ps->tco1_sts = inw(tcobase + TCO1_STS);
+ ps->tco2_sts = inw(tcobase + TCO2_STS);
ps->gpe0_sts[0] = inl(ACPI_BASE_ADDRESS + GPE0_STS(0));
ps->gpe0_sts[1] = inl(ACPI_BASE_ADDRESS + GPE0_STS(1));
ps->gpe0_sts[2] = inl(ACPI_BASE_ADDRESS + GPE0_STS(2));
@@ -120,9 +124,8 @@ struct chipset_power_state *fill_power_state(void)
ps->gpe0_en[2] = inl(ACPI_BASE_ADDRESS + GPE0_EN(2));
ps->gpe0_en[3] = inl(ACPI_BASE_ADDRESS + GPE0_EN(3));
- ps->gen_pmcon1 = pci_read_config16(PCH_DEV_LPC, GEN_PMCON_1);
- ps->gen_pmcon2 = pci_read_config16(PCH_DEV_LPC, GEN_PMCON_2);
- ps->gen_pmcon3 = pci_read_config16(PCH_DEV_LPC, GEN_PMCON_3);
+ ps->gen_pmcon_a = pci_read_config16(PCH_DEV_PMC, GEN_PMCON_A);
+ ps->gen_pmcon_b = pci_read_config16(PCH_DEV_PMC, GEN_PMCON_B);
ps->prev_sleep_state = prev_sleep_state(ps);
diff --git a/src/soc/intel/skylake/romstage/raminit.c b/src/soc/intel/skylake/romstage/raminit.c
deleted file mode 100644
index 52ea49100d..0000000000
--- a/src/soc/intel/skylake/romstage/raminit.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <arch/cbfs.h>
-#include <arch/io.h>
-#include <cbfs.h>
-#include <cbmem.h>
-#include <console/console.h>
-#include <device/pci_def.h>
-#include <lib.h>
-#include <string.h>
-#if CONFIG_EC_GOOGLE_CHROMEEC
-#include <ec/google/chromeec/ec.h>
-#include <ec/google/chromeec/ec_commands.h>
-#endif
-#include <stage_cache.h>
-#include <vendorcode/google/chromeos/chromeos.h>
-#include <soc/intel/common/mrc_cache.h>
-#include <soc/iomap.h>
-#include <soc/pei_data.h>
-#include <soc/pei_wrapper.h>
-#include <soc/pm.h>
-#include <soc/reset.h>
-#include <soc/romstage.h>
-#include <soc/smm.h>
-#include <soc/systemagent.h>
-
-/*
- * Find PEI executable in coreboot filesystem and execute it.
- */
-void raminit(struct pei_data *pei_data)
-{
- const struct mrc_saved_data *cache;
- struct memory_info* mem_info;
- pei_wrapper_entry_t entry;
- int ret;
-
- broadwell_fill_pei_data(pei_data);
-
- if (recovery_mode_enabled()) {
- /* Recovery mode does not use MRC cache */
- printk(BIOS_DEBUG, "Recovery mode: not using MRC cache.\n");
- } else if (!mrc_cache_get_current(&cache)) {
- /* MRC cache found */
- pei_data->saved_data_size = cache->size;
- pei_data->saved_data = &cache->data[0];
- } else if (pei_data->boot_mode == SLEEP_STATE_S3) {
- /* Waking from S3 and no cache. */
- printk(BIOS_DEBUG, "No MRC cache found in S3 resume path.\n");
- post_code(POST_RESUME_FAILURE);
- reset_system();
- } else {
- printk(BIOS_DEBUG, "No MRC cache found.\n");
-#if CONFIG_EC_GOOGLE_CHROMEEC
- if (pei_data->boot_mode == SLEEP_STATE_S0) {
- /* Ensure EC is running RO firmware. */
- google_chromeec_check_ec_image(EC_IMAGE_RO);
- }
-#endif
- }
-
- /*
- * Do not use saved pei data. Can be set by mainboard romstage
- * to force a full train of memory on every boot.
- */
- if (pei_data->disable_saved_data) {
- printk(BIOS_DEBUG, "Disabling PEI saved data by request\n");
- pei_data->saved_data = NULL;
- pei_data->saved_data_size = 0;
- }
-
- /* Determine if mrc.bin is in the cbfs. */
- entry = (pei_wrapper_entry_t)cbfs_get_file_content(
- CBFS_DEFAULT_MEDIA, "mrc.bin", CBFS_TYPE_MRC, NULL);
- if (entry == NULL) {
- printk(BIOS_DEBUG, "Couldn't find mrc.bin\n");
- return;
- }
-
- printk(BIOS_DEBUG, "Starting Memory Reference Code\n");
-
- ret = entry(pei_data);
- if (ret < 0)
- die("pei_data version mismatch\n");
-
- /* Print the MRC version after executing the UEFI PEI stage. */
- u32 version = MCHBAR32(MCHBAR_PEI_VERSION);
- printk(BIOS_DEBUG, "MRC Version %d.%d.%d Build %d\n",
- version >> 24 , (version >> 16) & 0xff,
- (version >> 8) & 0xff, version & 0xff);
-
- report_memory_config();
-
- /* Basic memory sanity test */
- quick_ram_check();
-
- if (pei_data->boot_mode != SLEEP_STATE_S3) {
- cbmem_initialize_empty();
- stage_cache_create_empty();
- } else {
- stage_cache_recover();
- if (cbmem_initialize()) {
-#if CONFIG_HAVE_ACPI_RESUME
- printk(BIOS_DEBUG, "Failed to recover CBMEM in S3 resume.\n");
- /* Failed S3 resume, reset to come up cleanly */
- reset_system();
-#endif
- }
- }
-
- printk(BIOS_DEBUG, "MRC data at %p %d bytes\n", pei_data->data_to_save,
- pei_data->data_to_save_size);
-
- if (pei_data->data_to_save != NULL && pei_data->data_to_save_size > 0)
- mrc_cache_stash_data(pei_data->data_to_save,
- pei_data->data_to_save_size);
-
- printk(BIOS_DEBUG, "create cbmem for dimm information\n");
- mem_info = cbmem_add(CBMEM_ID_MEMINFO, sizeof(struct memory_info));
- memcpy(mem_info, &pei_data->meminfo, sizeof(struct memory_info));
-
-}
diff --git a/src/soc/intel/skylake/romstage/report_platform.c b/src/soc/intel/skylake/romstage/report_platform.c
index 713b3e7abf..fe1a785d22 100644
--- a/src/soc/intel/skylake/romstage/report_platform.c
+++ b/src/soc/intel/skylake/romstage/report_platform.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,77 +15,55 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/cpu.h>
#include <arch/io.h>
#include <console/console.h>
-#include <device/pci.h>
-#include <string.h>
#include <cpu/x86/msr.h>
+#include <device/pci.h>
#include <soc/cpu.h>
#include <soc/pch.h>
#include <soc/pci_devs.h>
#include <soc/romstage.h>
#include <soc/systemagent.h>
+#include <string.h>
static struct {
u32 cpuid;
const char *name;
} cpu_table[] = {
- { CPUID_HASWELL_A0, "Haswell A0" },
- { CPUID_HASWELL_B0, "Haswell B0" },
- { CPUID_HASWELL_C0, "Haswell C0" },
- { CPUID_HASWELL_ULT_B0, "Haswell ULT B0" },
- { CPUID_HASWELL_ULT, "Haswell ULT C0 or D0" },
- { CPUID_HASWELL_HALO, "Haswell Perf Halo" },
- { CPUID_BROADWELL_C0, "Broadwell C0" },
- { CPUID_BROADWELL_D0, "Broadwell D0" },
- { CPUID_BROADWELL_E0, "Broadwell E0 or F0" },
+ { CPUID_SKYLAKE_C0, "Skylake C0" },
+ { CPUID_SKYLAKE_D0, "Skylake D0" },
};
static struct {
- u8 revid;
+ u16 mchid;
const char *name;
-} mch_rev_table[] = {
- { MCH_BROADWELL_REV_D0, "Broadwell D0" },
- { MCH_BROADWELL_REV_E0, "Broadwell E0" },
- { MCH_BROADWELL_REV_F0, "Broadwell F0" },
+} mch_table[] = {
+ { MCH_SKYLAKE_ID_U, "Skylake-U" },
+ { MCH_SKYLAKE_ID_Y, "Skylake-Y" },
+ { MCH_SKYLAKE_ID_ULX, "Skylake-ULX" },
};
static struct {
u16 lpcid;
const char *name;
} pch_table[] = {
- { PCH_LPT_LP_SAMPLE, "LynxPoint LP Sample" },
- { PCH_LPT_LP_PREMIUM, "LynxPoint LP Premium" },
- { PCH_LPT_LP_MAINSTREAM, "LynxPoint LP Mainstream" },
- { PCH_LPT_LP_VALUE, "LynxPoint LP Value" },
- { PCH_WPT_HSW_U_SAMPLE, "Haswell U Sample" },
- { PCH_WPT_BDW_U_SAMPLE, "Broadwell U Sample" },
- { PCH_WPT_BDW_U_PREMIUM, "Broadwell U Premium" },
- { PCH_WPT_BDW_U_BASE, "Broadwell U Base" },
- { PCH_WPT_BDW_Y_SAMPLE, "Broadwell Y Sample" },
- { PCH_WPT_BDW_Y_PREMIUM, "Broadwell Y Premium" },
- { PCH_WPT_BDW_Y_BASE, "Broadwell Y Base" },
- { PCH_WPT_BDW_H, "Broadwell H" },
+ { PCH_SPT_LP_SAMPLE, "Skylake LP Sample" },
+ { PCH_SPT_LP_U_BASE, "Skylake-U Base" },
+ { PCH_SPT_LP_U_PREMIUM, "Skylake-U Premium" },
+ { PCH_SPT_LP_Y_PREMIUM, "Skylake-Y Premium" },
};
static struct {
u16 igdid;
const char *name;
} igd_table[] = {
- { IGD_HASWELL_ULT_GT1, "Haswell ULT GT1" },
- { IGD_HASWELL_ULT_GT2, "Haswell ULT GT2" },
- { IGD_HASWELL_ULT_GT3, "Haswell ULT GT3" },
- { IGD_BROADWELL_U_GT1, "Broadwell U GT1" },
- { IGD_BROADWELL_U_GT2, "Broadwell U GT2" },
- { IGD_BROADWELL_U_GT3_15W, "Broadwell U GT3 (15W)" },
- { IGD_BROADWELL_U_GT3_28W, "Broadwell U GT3 (28W)" },
- { IGD_BROADWELL_Y_GT2, "Broadwell Y GT2" },
- { IGD_BROADWELL_H_GT2, "Broadwell U GT2" },
- { IGD_BROADWELL_H_GT3, "Broadwell U GT3" },
+ { IGD_SKYLAKE_GT1_SULTM, "Skylake ULT GT1"},
+ { IGD_SKYLAKE_GT2_SULXM, "Skylake ULX GT2" },
+ { IGD_SKYLAKE_GT2_SULTM, "Skylake ULT GT2" },
};
static void report_cpu_info(void)
@@ -102,8 +81,8 @@ static void report_cpu_info(void)
if (cpuidr.eax < 0x80000004) {
strcpy(cpu_string, "Platform info not available");
} else {
- u32 *p = (u32*) cpu_string;
- for (i = 2; i <= 4 ; i++) {
+ u32 *p = (u32 *) cpu_string;
+ for (i = 2; i <= 4; i++) {
cpuidr = cpuid(index + i);
*p++ = cpuidr.eax;
*p++ = cpuidr.ebx;
@@ -136,29 +115,27 @@ static void report_cpu_info(void)
aes = (cpuidr.ecx & (1 << 25)) ? 1 : 0;
txt = (cpuidr.ecx & (1 << 6)) ? 1 : 0;
vt = (cpuidr.ecx & (1 << 5)) ? 1 : 0;
- printk(BIOS_DEBUG, "CPU: AES %ssupported, TXT %ssupported, "
- "VT %ssupported\n", mode[aes], mode[txt], mode[vt]);
+ printk(BIOS_DEBUG,
+ "CPU: AES %ssupported, TXT %ssupported, VT %ssupported\n",
+ mode[aes], mode[txt], mode[vt]);
}
static void report_mch_info(void)
{
int i;
- u16 mch_device = pci_read_config16(SA_DEV_ROOT, PCI_DEVICE_ID);
+ u16 mchid = pci_read_config16(SA_DEV_ROOT, PCI_DEVICE_ID);
u8 mch_revision = pci_read_config8(SA_DEV_ROOT, PCI_REVISION_ID);
const char *mch_type = "Unknown";
- /* Look for string to match the revision for Broadwell U/Y */
- if (mch_device == MCH_BROADWELL_ID_U_Y) {
- for (i = 0; i < ARRAY_SIZE(mch_rev_table); i++) {
- if (mch_rev_table[i].revid == mch_revision) {
- mch_type = mch_rev_table[i].name;
- break;
- }
+ for (i = 0; i < ARRAY_SIZE(mch_table); i++) {
+ if (mch_table[i].mchid == mchid) {
+ mch_type = mch_table[i].name;
+ break;
}
}
printk(BIOS_DEBUG, "MCH: device id %04x (rev %02x) is %s\n",
- mch_device, mch_revision, mch_type);
+ mchid, mch_revision, mch_type);
}
static void report_pch_info(void)
diff --git a/src/soc/intel/skylake/romstage/romstage.c b/src/soc/intel/skylake/romstage/romstage.c
index c026004eaf..e8bb877230 100644
--- a/src/soc/intel/skylake/romstage/romstage.c
+++ b/src/soc/intel/skylake/romstage/romstage.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <stddef.h>
@@ -24,141 +25,542 @@
#include <arch/cbfs.h>
#include <arch/stages.h>
#include <arch/early_variables.h>
-#include <console/console.h>
-#include <cbfs.h>
#include <cbmem.h>
+#include <chip.h>
+#include <console/console.h>
#include <cpu/x86/mtrr.h>
+#include <device/device.h>
+#include <device/pci_def.h>
#include <elog.h>
+#include <reset.h>
#include <romstage_handoff.h>
-#include <stage_cache.h>
-#include <timestamp.h>
-#include <soc/me.h>
-#include <soc/pei_data.h>
+#include <soc/pci_devs.h>
+#include <soc/pei_wrapper.h>
#include <soc/pm.h>
-#include <soc/reset.h>
+#include <soc/serialio.h>
#include <soc/romstage.h>
#include <soc/spi.h>
+#include <stage_cache.h>
+#include <timestamp.h>
#include <vendorcode/google/chromeos/chromeos.h>
-/* Entry from cache-as-ram.inc. */
-void * asmlinkage romstage_main(unsigned long bist,
- uint32_t tsc_low, uint32_t tsc_hi)
+/* SOC initialization before the console is enabled */
+void soc_pre_console_init(struct romstage_params *params)
{
- struct romstage_params rp = {
- .bist = bist,
- .pei_data = NULL,
- };
-
- post_code(0x30);
-
- /* Save initial timestamp from bootblock. */
- timestamp_init((((uint64_t)tsc_hi) << 32) | (uint64_t)tsc_low);
-
- /* Save romstage begin */
- timestamp_add_now(TS_START_ROMSTAGE);
-
/* System Agent Early Initialization */
systemagent_early_init();
- /* PCH Early Initialization */
- pch_early_init();
-
- /* Call into mainboard pre console init. Needed to enable serial port
- on IT8772 */
- mainboard_pre_console_init();
-
- /* Start console drivers */
- console_init();
-
- /* Get power state */
- rp.power_state = fill_power_state();
-
- /* Print useful platform information */
- report_platform_info();
-
- /* Set CPU frequency to maximum */
- set_max_freq();
-
- /* Call into mainboard. */
- mainboard_romstage_entry(&rp);
-
-#if CONFIG_CHROMEOS
- save_chromeos_gpios();
-#endif
-
- return setup_stack_and_mttrs();
+ if (IS_ENABLED(CONFIG_INTEL_PCH_UART_CONSOLE))
+ pch_uart_init();
}
-static inline void chromeos_init(int prev_sleep_state)
+/* SOC initialization before RAM is enabled */
+void soc_pre_ram_init(struct romstage_params *params)
{
-#if CONFIG_CHROMEOS
- /* Normalize the sleep state to what init_chromeos() wants for S3: 2 */
- init_chromeos(prev_sleep_state == SLEEP_STATE_S3 ? 2 : 0);
-#endif
+ /* Prepare to initialize memory */
+ soc_fill_pei_data(params->pei_data);
}
-/* Entry from the mainboard. */
-void romstage_common(struct romstage_params *params)
+void soc_romstage_init(struct romstage_params *params)
{
- struct romstage_handoff *handoff;
-
- post_code(0x32);
-
- timestamp_add_now(TS_BEFORE_INITRAM);
-
- params->pei_data->boot_mode = params->power_state->prev_sleep_state;
-
-#if CONFIG_ELOG_BOOT_COUNT
- if (params->power_state->prev_sleep_state != SLEEP_STATE_S3)
- boot_count_increment();
-#endif
-
- /* Print ME state before MRC */
- intel_me_status();
-
- /* Save ME HSIO version */
- intel_me_hsio_version(&params->power_state->hsio_version,
- &params->power_state->hsio_checksum);
-
- /* Initialize RAM */
- raminit(params->pei_data);
-
- timestamp_add_now(TS_AFTER_INITRAM);
-
- handoff = romstage_handoff_find_or_add();
- if (handoff != NULL)
- handoff->s3_resume = (params->power_state->prev_sleep_state ==
- SLEEP_STATE_S3);
- else
- printk(BIOS_DEBUG, "Romstage handoff structure not added!\n");
-
- chromeos_init(params->power_state->prev_sleep_state);
+ pch_early_init();
}
-void asmlinkage romstage_after_car(void)
+#if IS_ENABLED(CONFIG_CHROMEOS)
+int vboot_get_sw_write_protect(void)
{
- timestamp_add_now(TS_END_ROMSTAGE);
+ u8 status;
- /* Load the ramstage. */
- copy_and_run();
- while (1);
+ /* Return unprotected status if status read fails. */
+ return early_spi_read_wpsr(&status) ? 0 : !!(status & 0x80);
}
+#endif
-void ramstage_cache_invalid(void)
+/* UPD parameters to be initialized before MemoryInit */
+void soc_memory_init_params(MEMORY_INIT_UPD *params)
{
-#if CONFIG_RESET_ON_INVALID_RAMSTAGE_CACHE
- /* Perform cold reset on invalid ramstage cache. */
- reset_system();
-#endif
+ const struct device *dev;
+ const struct soc_intel_skylake_config *config;
+ int i;
+
+ /* Set the parameters for MemoryInit */
+ dev = dev_find_slot(0, PCI_DEVFN(PCH_DEV_SLOT_LPC, 0));
+ config = dev->chip_info;
+
+ for (i = 0; i < PchSerialIoIndexMax; i++)
+ params->SerialIoDevMode[i] = config->SerialIoDevMode[i];
+
+ params->MmioSize = 0x800; /* 2GB in MB */
+ params->TsegSize = CONFIG_SMM_TSEG_SIZE;
+ params->IedSize = config->IedSize;
+ params->ProbelessTrace = config->ProbelessTrace;
+ params->EnableLan = config->EnableLan;
+ params->EnableSata = config->EnableSata;
+ params->SataMode = config->SataMode;
+ params->SataSalpSupport = config->SataSalpSupport;
+ params->SataPortsEnable[0] = config->SataPortsEnable[0];
+ params->SsicPortEnable = config->SsicPortEnable;
+ params->EnableTraceHub = config->EnableTraceHub;
+ params->SmbusEnable = config->SmbusEnable;
+ params->Cio2Enable = config->Cio2Enable;
+ params->ScsEmmcEnabled = config->ScsEmmcEnabled;
+ params->ScsEmmcHs400Enabled = config->ScsEmmcHs400Enabled;
+ params->ScsSdCardEnabled = config->ScsSdCardEnabled;
+ params->IshEnable = 0;
+ params->EnableAzalia = config->EnableAzalia;
+ params->IoBufferOwnership = config->IoBufferOwnership;
+ params->DspEnable = config->DspEnable;
+ params->XdciEnable = config->XdciEnable;
}
-#if CONFIG_CHROMEOS
-int vboot_get_sw_write_protect(void)
+void soc_display_memory_init_params(const MEMORY_INIT_UPD *old,
+ MEMORY_INIT_UPD *new)
{
- u8 status;
- /* Return unprotected status if status read fails. */
- return (early_spi_read_wpsr(&status) ? 0 : !!(status & 0x80));
+ /* Display the parameters for MemoryInit */
+ printk(BIOS_SPEW, "UPD values for MemoryInit:\n");
+
+ soc_display_upd_value("PlatformMemorySize", 8,
+ old->PlatformMemorySize, new->PlatformMemorySize);
+ soc_display_upd_value("MemorySpdPtr00", 4, old->MemorySpdPtr00,
+ new->MemorySpdPtr00);
+ soc_display_upd_value("MemorySpdPtr01", 4, old->MemorySpdPtr01,
+ new->MemorySpdPtr01);
+ soc_display_upd_value("MemorySpdPtr10", 4, old->MemorySpdPtr10,
+ new->MemorySpdPtr10);
+ soc_display_upd_value("MemorySpdPtr11", 4, old->MemorySpdPtr11,
+ new->MemorySpdPtr11);
+ soc_display_upd_value("MemorySpdDataLen", 2, old->MemorySpdDataLen,
+ new->MemorySpdDataLen);
+ soc_display_upd_value("DqByteMapCh0[0]", 1, old->DqByteMapCh0[0],
+ new->DqByteMapCh0[0]);
+ soc_display_upd_value("DqByteMapCh0[1]", 1, old->DqByteMapCh0[1],
+ new->DqByteMapCh0[1]);
+ soc_display_upd_value("DqByteMapCh0[2]", 1, old->DqByteMapCh0[2],
+ new->DqByteMapCh0[2]);
+ soc_display_upd_value("DqByteMapCh0[3]", 1, old->DqByteMapCh0[3],
+ new->DqByteMapCh0[3]);
+ soc_display_upd_value("DqByteMapCh0[4]", 1, old->DqByteMapCh0[4],
+ new->DqByteMapCh0[4]);
+ soc_display_upd_value("DqByteMapCh0[5]", 1, old->DqByteMapCh0[5],
+ new->DqByteMapCh0[5]);
+ soc_display_upd_value("DqByteMapCh0[6]", 1, old->DqByteMapCh0[6],
+ new->DqByteMapCh0[6]);
+ soc_display_upd_value("DqByteMapCh0[7]", 1, old->DqByteMapCh0[7],
+ new->DqByteMapCh0[7]);
+ soc_display_upd_value("DqByteMapCh0[8]", 1, old->DqByteMapCh0[8],
+ new->DqByteMapCh0[8]);
+ soc_display_upd_value("DqByteMapCh0[9]", 1, old->DqByteMapCh0[9],
+ new->DqByteMapCh0[9]);
+ soc_display_upd_value("DqByteMapCh0[10]", 1, old->DqByteMapCh0[10],
+ new->DqByteMapCh0[10]);
+ soc_display_upd_value("DqByteMapCh0[11]", 1, old->DqByteMapCh0[11],
+ new->DqByteMapCh0[11]);
+ soc_display_upd_value("DqByteMapCh1[0]", 1, old->DqByteMapCh1[0],
+ new->DqByteMapCh1[0]);
+ soc_display_upd_value("DqByteMapCh1[1]", 1, old->DqByteMapCh1[1],
+ new->DqByteMapCh1[1]);
+ soc_display_upd_value("DqByteMapCh1[2]", 1, old->DqByteMapCh1[2],
+ new->DqByteMapCh1[2]);
+ soc_display_upd_value("DqByteMapCh1[3]", 1, old->DqByteMapCh1[3],
+ new->DqByteMapCh1[3]);
+ soc_display_upd_value("DqByteMapCh1[4]", 1, old->DqByteMapCh1[4],
+ new->DqByteMapCh1[4]);
+ soc_display_upd_value("DqByteMapCh1[5]", 1, old->DqByteMapCh1[5],
+ new->DqByteMapCh1[5]);
+ soc_display_upd_value("DqByteMapCh1[6]", 1, old->DqByteMapCh1[6],
+ new->DqByteMapCh1[6]);
+ soc_display_upd_value("DqByteMapCh1[7]", 1, old->DqByteMapCh1[7],
+ new->DqByteMapCh1[7]);
+ soc_display_upd_value("DqByteMapCh1[8]", 1, old->DqByteMapCh1[8],
+ new->DqByteMapCh1[8]);
+ soc_display_upd_value("DqByteMapCh1[9]", 1, old->DqByteMapCh1[9],
+ new->DqByteMapCh1[9]);
+ soc_display_upd_value("DqByteMapCh1[10]", 1, old->DqByteMapCh1[10],
+ new->DqByteMapCh1[10]);
+ soc_display_upd_value("DqByteMapCh1[11]", 1, old->DqByteMapCh1[11],
+ new->DqByteMapCh1[11]);
+ soc_display_upd_value("DqsMapCpu2DramCh0[0]", 1,
+ old->DqsMapCpu2DramCh0[0], new->DqsMapCpu2DramCh0[0]);
+ soc_display_upd_value("DqsMapCpu2DramCh0[1]", 1,
+ old->DqsMapCpu2DramCh0[1], new->DqsMapCpu2DramCh0[1]);
+ soc_display_upd_value("DqsMapCpu2DramCh0[2]", 1,
+ old->DqsMapCpu2DramCh0[2], new->DqsMapCpu2DramCh0[2]);
+ soc_display_upd_value("DqsMapCpu2DramCh0[3]", 1,
+ old->DqsMapCpu2DramCh0[3], new->DqsMapCpu2DramCh0[3]);
+ soc_display_upd_value("DqsMapCpu2DramCh0[4]", 1,
+ old->DqsMapCpu2DramCh0[4], new->DqsMapCpu2DramCh0[4]);
+ soc_display_upd_value("DqsMapCpu2DramCh0[5]", 1,
+ old->DqsMapCpu2DramCh0[5], new->DqsMapCpu2DramCh0[5]);
+ soc_display_upd_value("DqsMapCpu2DramCh0[6]", 1,
+ old->DqsMapCpu2DramCh0[6], new->DqsMapCpu2DramCh0[6]);
+ soc_display_upd_value("DqsMapCpu2DramCh0[7]", 1,
+ old->DqsMapCpu2DramCh0[7], new->DqsMapCpu2DramCh0[7]);
+ soc_display_upd_value("DqsMapCpu2DramCh1[0]", 1,
+ old->DqsMapCpu2DramCh1[0], new->DqsMapCpu2DramCh1[0]);
+ soc_display_upd_value("DqsMapCpu2DramCh1[1]", 1,
+ old->DqsMapCpu2DramCh1[1], new->DqsMapCpu2DramCh1[1]);
+ soc_display_upd_value("DqsMapCpu2DramCh1[2]", 1,
+ old->DqsMapCpu2DramCh1[2], new->DqsMapCpu2DramCh1[2]);
+ soc_display_upd_value("DqsMapCpu2DramCh1[3]", 1,
+ old->DqsMapCpu2DramCh1[3], new->DqsMapCpu2DramCh1[3]);
+ soc_display_upd_value("DqsMapCpu2DramCh1[4]", 1,
+ old->DqsMapCpu2DramCh1[4], new->DqsMapCpu2DramCh1[4]);
+ soc_display_upd_value("DqsMapCpu2DramCh1[5]", 1,
+ old->DqsMapCpu2DramCh1[5], new->DqsMapCpu2DramCh1[5]);
+ soc_display_upd_value("DqsMapCpu2DramCh1[6]", 1,
+ old->DqsMapCpu2DramCh1[6], new->DqsMapCpu2DramCh1[6]);
+ soc_display_upd_value("DqsMapCpu2DramCh1[7]", 1,
+ old->DqsMapCpu2DramCh1[7], new->DqsMapCpu2DramCh1[7]);
+ soc_display_upd_value("DqPinsInterleaved", 1,
+ old->DqPinsInterleaved, new->DqPinsInterleaved);
+ soc_display_upd_value("RcompResistor[0]", 2, old->RcompResistor[0],
+ new->RcompResistor[0]);
+ soc_display_upd_value("RcompResistor[1]", 2, old->RcompResistor[1],
+ new->RcompResistor[1]);
+ soc_display_upd_value("RcompResistor[2]", 2, old->RcompResistor[2],
+ new->RcompResistor[2]);
+ soc_display_upd_value("RcompTarget[0]", 1, old->RcompTarget[0],
+ new->RcompTarget[0]);
+ soc_display_upd_value("RcompTarget[1]", 1, old->RcompTarget[1],
+ new->RcompTarget[1]);
+ soc_display_upd_value("RcompTarget[2]", 1, old->RcompTarget[2],
+ new->RcompTarget[2]);
+ soc_display_upd_value("RcompTarget[3]", 1, old->RcompTarget[3],
+ new->RcompTarget[3]);
+ soc_display_upd_value("RcompTarget[4]", 1, old->RcompTarget[4],
+ new->RcompTarget[4]);
+ soc_display_upd_value("CaVrefConfig", 1, old->CaVrefConfig,
+ new->CaVrefConfig);
+ soc_display_upd_value("SmramMask", 1, old->SmramMask, new->SmramMask);
+ soc_display_upd_value("MrcFastBoot", 1, old->MrcFastBoot,
+ new->MrcFastBoot);
+ soc_display_upd_value("IedSize", 4, old->IedSize, new->IedSize);
+ soc_display_upd_value("TsegSize", 4, old->TsegSize, new->TsegSize);
+ soc_display_upd_value("MmioSize", 2, old->MmioSize, new->MmioSize);
+ soc_display_upd_value("ProbelessTrace", 1, old->ProbelessTrace,
+ new->ProbelessTrace);
+ soc_display_upd_value("EnableLan", 1, old->EnableLan, new->EnableLan);
+ soc_display_upd_value("EnableSata", 1, old->EnableSata,
+ new->EnableSata);
+ soc_display_upd_value("SataMode", 1, old->SataMode, new->SataMode);
+ soc_display_upd_value("SataSalpSupport", 1, old->SataSalpSupport,
+ new->SataSalpSupport);
+ soc_display_upd_value("SataPortsEnable[0]", 1, old->SataPortsEnable[0],
+ new->SataPortsEnable[0]);
+ soc_display_upd_value("SataPortsEnable[1]", 1, old->SataPortsEnable[1],
+ new->SataPortsEnable[1]);
+ soc_display_upd_value("SataPortsEnable[2]", 1, old->SataPortsEnable[2],
+ new->SataPortsEnable[2]);
+ soc_display_upd_value("SataPortsEnable[3]", 1, old->SataPortsEnable[3],
+ new->SataPortsEnable[3]);
+ soc_display_upd_value("SataPortsEnable[4]", 1, old->SataPortsEnable[4],
+ new->SataPortsEnable[4]);
+ soc_display_upd_value("SataPortsEnable[5]", 1, old->SataPortsEnable[5],
+ new->SataPortsEnable[5]);
+ soc_display_upd_value("SataPortsEnable[6]", 1, old->SataPortsEnable[6],
+ new->SataPortsEnable[6]);
+ soc_display_upd_value("SataPortsEnable[7]", 1, old->SataPortsEnable[7],
+ new->SataPortsEnable[7]);
+ soc_display_upd_value("SataPortsDevSlp[0]", 1, old->SataPortsDevSlp[0],
+ new->SataPortsDevSlp[0]);
+ soc_display_upd_value("SataPortsDevSlp[1]", 1, old->SataPortsDevSlp[1],
+ new->SataPortsDevSlp[1]);
+ soc_display_upd_value("SataPortsDevSlp[2]", 1, old->SataPortsDevSlp[2],
+ new->SataPortsDevSlp[2]);
+ soc_display_upd_value("SataPortsDevSlp[3]", 1, old->SataPortsDevSlp[3],
+ new->SataPortsDevSlp[3]);
+ soc_display_upd_value("SataPortsDevSlp[4]", 1, old->SataPortsDevSlp[4],
+ new->SataPortsDevSlp[4]);
+ soc_display_upd_value("SataPortsDevSlp[5]", 1, old->SataPortsDevSlp[5],
+ new->SataPortsDevSlp[5]);
+ soc_display_upd_value("SataPortsDevSlp[6]", 1, old->SataPortsDevSlp[6],
+ new->SataPortsDevSlp[6]);
+ soc_display_upd_value("SataPortsDevSlp[7]", 1, old->SataPortsDevSlp[7],
+ new->SataPortsDevSlp[7]);
+ soc_display_upd_value("EnableAzalia", 1, old->EnableAzalia,
+ new->EnableAzalia);
+ soc_display_upd_value("DspEnable", 1, old->DspEnable, new->DspEnable);
+ soc_display_upd_value("IoBufferOwnership", 1, old->IoBufferOwnership,
+ new->IoBufferOwnership);
+ soc_display_upd_value("EnableTraceHub", 1, old->EnableTraceHub,
+ new->EnableTraceHub);
+ soc_display_upd_value("PcieRpEnable[0]", 1, old->PcieRpEnable[0],
+ new->PcieRpEnable[0]);
+ soc_display_upd_value("PcieRpEnable[1]", 1, old->PcieRpEnable[1],
+ new->PcieRpEnable[1]);
+ soc_display_upd_value("PcieRpEnable[2]", 1, old->PcieRpEnable[2],
+ new->PcieRpEnable[2]);
+ soc_display_upd_value("PcieRpEnable[3]", 1, old->PcieRpEnable[3],
+ new->PcieRpEnable[3]);
+ soc_display_upd_value("PcieRpEnable[4]", 1, old->PcieRpEnable[4],
+ new->PcieRpEnable[4]);
+ soc_display_upd_value("PcieRpEnable[5]", 1, old->PcieRpEnable[5],
+ new->PcieRpEnable[5]);
+ soc_display_upd_value("PcieRpEnable[6]", 1, old->PcieRpEnable[6],
+ new->PcieRpEnable[6]);
+ soc_display_upd_value("PcieRpEnable[7]", 1, old->PcieRpEnable[7],
+ new->PcieRpEnable[7]);
+ soc_display_upd_value("PcieRpEnable[8]", 1, old->PcieRpEnable[8],
+ new->PcieRpEnable[8]);
+ soc_display_upd_value("PcieRpEnable[9]", 1, old->PcieRpEnable[9],
+ new->PcieRpEnable[9]);
+ soc_display_upd_value("PcieRpEnable[10]", 1, old->PcieRpEnable[10],
+ new->PcieRpEnable[10]);
+ soc_display_upd_value("PcieRpEnable[11]", 1, old->PcieRpEnable[11],
+ new->PcieRpEnable[11]);
+ soc_display_upd_value("PcieRpEnable[12]", 1, old->PcieRpEnable[12],
+ new->PcieRpEnable[12]);
+ soc_display_upd_value("PcieRpEnable[13]", 1, old->PcieRpEnable[13],
+ new->PcieRpEnable[13]);
+ soc_display_upd_value("PcieRpEnable[14]", 1, old->PcieRpEnable[14],
+ new->PcieRpEnable[14]);
+ soc_display_upd_value("PcieRpEnable[15]", 1, old->PcieRpEnable[15],
+ new->PcieRpEnable[15]);
+ soc_display_upd_value("PcieRpEnable[16]", 1, old->PcieRpEnable[16],
+ new->PcieRpEnable[16]);
+ soc_display_upd_value("PcieRpEnable[17]", 1, old->PcieRpEnable[17],
+ new->PcieRpEnable[17]);
+ soc_display_upd_value("PcieRpEnable[18]", 1, old->PcieRpEnable[18],
+ new->PcieRpEnable[18]);
+ soc_display_upd_value("PcieRpEnable[19]", 1, old->PcieRpEnable[19],
+ new->PcieRpEnable[19]);
+ soc_display_upd_value("PcieRpClkReqSupport[0]", 1,
+ old->PcieRpClkReqSupport[0],
+ new->PcieRpClkReqSupport[0]);
+ soc_display_upd_value("PcieRpClkReqSupport[1]", 1,
+ old->PcieRpClkReqSupport[1],
+ new->PcieRpClkReqSupport[1]);
+ soc_display_upd_value("PcieRpClkReqSupport[2]", 1,
+ old->PcieRpClkReqSupport[2],
+ new->PcieRpClkReqSupport[2]);
+ soc_display_upd_value("PcieRpClkReqSupport[3]", 1,
+ old->PcieRpClkReqSupport[3],
+ new->PcieRpClkReqSupport[3]);
+ soc_display_upd_value("PcieRpClkReqSupport[4]", 1,
+ old->PcieRpClkReqSupport[4],
+ new->PcieRpClkReqSupport[4]);
+ soc_display_upd_value("PcieRpClkReqSupport[5]", 1,
+ old->PcieRpClkReqSupport[5],
+ new->PcieRpClkReqSupport[5]);
+ soc_display_upd_value("PcieRpClkReqSupport[6]", 1,
+ old->PcieRpClkReqSupport[6],
+ new->PcieRpClkReqSupport[6]);
+ soc_display_upd_value("PcieRpClkReqSupport[7]", 1,
+ old->PcieRpClkReqSupport[7],
+ new->PcieRpClkReqSupport[7]);
+ soc_display_upd_value("PcieRpClkReqSupport[8]", 1,
+ old->PcieRpClkReqSupport[8],
+ new->PcieRpClkReqSupport[8]);
+ soc_display_upd_value("PcieRpClkReqSupport[9]", 1,
+ old->PcieRpClkReqSupport[9],
+ new->PcieRpClkReqSupport[9]);
+ soc_display_upd_value("PcieRpClkReqSupport[10]", 1,
+ old->PcieRpClkReqSupport[10],
+ new->PcieRpClkReqSupport[10]);
+ soc_display_upd_value("PcieRpClkReqSupport[11]", 1,
+ old->PcieRpClkReqSupport[11],
+ new->PcieRpClkReqSupport[11]);
+ soc_display_upd_value("PcieRpClkReqSupport[12]", 1,
+ old->PcieRpClkReqSupport[12],
+ new->PcieRpClkReqSupport[12]);
+ soc_display_upd_value("PcieRpClkReqSupport[13]", 1,
+ old->PcieRpClkReqSupport[13],
+ new->PcieRpClkReqSupport[13]);
+ soc_display_upd_value("PcieRpClkReqSupport[14]", 1,
+ old->PcieRpClkReqSupport[14],
+ new->PcieRpClkReqSupport[14]);
+ soc_display_upd_value("PcieRpClkReqSupport[15]", 1,
+ old->PcieRpClkReqSupport[15],
+ new->PcieRpClkReqSupport[15]);
+ soc_display_upd_value("PcieRpClkReqSupport[16]", 1,
+ old->PcieRpClkReqSupport[16],
+ new->PcieRpClkReqSupport[16]);
+ soc_display_upd_value("PcieRpClkReqSupport[17]", 1,
+ old->PcieRpClkReqSupport[17],
+ new->PcieRpClkReqSupport[17]);
+ soc_display_upd_value("PcieRpClkReqSupport[18]", 1,
+ old->PcieRpClkReqSupport[18],
+ new->PcieRpClkReqSupport[18]);
+ soc_display_upd_value("PcieRpClkReqSupport[19]", 1,
+ old->PcieRpClkReqSupport[19],
+ new->PcieRpClkReqSupport[19]);
+ soc_display_upd_value("PcieRpClkReqNumber[0]", 1,
+ old->PcieRpClkReqNumber[0],
+ new->PcieRpClkReqNumber[0]);
+ soc_display_upd_value("PcieRpClkReqNumber[1]", 1,
+ old->PcieRpClkReqNumber[1],
+ new->PcieRpClkReqNumber[1]);
+ soc_display_upd_value("PcieRpClkReqNumber[2]", 1,
+ old->PcieRpClkReqNumber[2],
+ new->PcieRpClkReqNumber[2]);
+ soc_display_upd_value("PcieRpClkReqNumber[3]", 1,
+ old->PcieRpClkReqNumber[3],
+ new->PcieRpClkReqNumber[3]);
+ soc_display_upd_value("PcieRpClkReqNumber[4]", 1,
+ old->PcieRpClkReqNumber[4],
+ new->PcieRpClkReqNumber[4]);
+ soc_display_upd_value("PcieRpClkReqNumber[5]", 1,
+ old->PcieRpClkReqNumber[5],
+ new->PcieRpClkReqNumber[5]);
+ soc_display_upd_value("PcieRpClkReqNumber[6]", 1,
+ old->PcieRpClkReqNumber[6],
+ new->PcieRpClkReqNumber[6]);
+ soc_display_upd_value("PcieRpClkReqNumber[7]", 1,
+ old->PcieRpClkReqNumber[7],
+ new->PcieRpClkReqNumber[7]);
+ soc_display_upd_value("PcieRpClkReqNumber[8]", 1,
+ old->PcieRpClkReqNumber[8],
+ new->PcieRpClkReqNumber[8]);
+ soc_display_upd_value("PcieRpClkReqNumber[9]", 1,
+ old->PcieRpClkReqNumber[9],
+ new->PcieRpClkReqNumber[9]);
+ soc_display_upd_value("PcieRpClkReqNumber[10]", 1,
+ old->PcieRpClkReqNumber[10],
+ new->PcieRpClkReqNumber[10]);
+ soc_display_upd_value("PcieRpClkReqNumber[11]", 1,
+ old->PcieRpClkReqNumber[11],
+ new->PcieRpClkReqNumber[11]);
+ soc_display_upd_value("PcieRpClkReqNumber[12]", 1,
+ old->PcieRpClkReqNumber[12],
+ new->PcieRpClkReqNumber[12]);
+ soc_display_upd_value("PcieRpClkReqNumber[13]", 1,
+ old->PcieRpClkReqNumber[13],
+ new->PcieRpClkReqNumber[13]);
+ soc_display_upd_value("PcieRpClkReqNumber[14]", 1,
+ old->PcieRpClkReqNumber[14],
+ new->PcieRpClkReqNumber[14]);
+ soc_display_upd_value("PcieRpClkReqNumber[15]", 1,
+ old->PcieRpClkReqNumber[15],
+ new->PcieRpClkReqNumber[15]);
+ soc_display_upd_value("PcieRpClkReqNumber[16]", 1,
+ old->PcieRpClkReqNumber[16],
+ new->PcieRpClkReqNumber[16]);
+ soc_display_upd_value("PcieRpClkReqNumber[17]", 1,
+ old->PcieRpClkReqNumber[17],
+ new->PcieRpClkReqNumber[17]);
+ soc_display_upd_value("PcieRpClkReqNumber[18]", 1,
+ old->PcieRpClkReqNumber[18],
+ new->PcieRpClkReqNumber[18]);
+ soc_display_upd_value("PcieRpClkReqNumber[19]", 1,
+ old->PcieRpClkReqNumber[19],
+ new->PcieRpClkReqNumber[19]);
+ soc_display_upd_value("PortUsb20Enable[0]", 1, old->PortUsb20Enable[0],
+ new->PortUsb20Enable[0]);
+ soc_display_upd_value("PortUsb20Enable[1]", 1, old->PortUsb20Enable[1],
+ new->PortUsb20Enable[1]);
+ soc_display_upd_value("PortUsb20Enable[2]", 1, old->PortUsb20Enable[2],
+ new->PortUsb20Enable[2]);
+ soc_display_upd_value("PortUsb20Enable[3]", 1, old->PortUsb20Enable[3],
+ new->PortUsb20Enable[3]);
+ soc_display_upd_value("PortUsb20Enable[4]", 1, old->PortUsb20Enable[4],
+ new->PortUsb20Enable[4]);
+ soc_display_upd_value("PortUsb20Enable[5]", 1, old->PortUsb20Enable[5],
+ new->PortUsb20Enable[5]);
+ soc_display_upd_value("PortUsb20Enable[6]", 1, old->PortUsb20Enable[6],
+ new->PortUsb20Enable[6]);
+ soc_display_upd_value("PortUsb20Enable[7]", 1, old->PortUsb20Enable[7],
+ new->PortUsb20Enable[7]);
+ soc_display_upd_value("PortUsb20Enable[8]", 1, old->PortUsb20Enable[8],
+ new->PortUsb20Enable[8]);
+ soc_display_upd_value("PortUsb20Enable[9]", 1, old->PortUsb20Enable[9],
+ new->PortUsb20Enable[9]);
+ soc_display_upd_value("PortUsb20Enable[10]", 1,
+ old->PortUsb20Enable[10],
+ new->PortUsb20Enable[10]);
+ soc_display_upd_value("PortUsb20Enable[11]", 1,
+ old->PortUsb20Enable[11],
+ new->PortUsb20Enable[11]);
+ soc_display_upd_value("PortUsb20Enable[12]", 1,
+ old->PortUsb20Enable[12],
+ new->PortUsb20Enable[12]);
+ soc_display_upd_value("PortUsb20Enable[13]", 1,
+ old->PortUsb20Enable[13],
+ new->PortUsb20Enable[13]);
+ soc_display_upd_value("PortUsb20Enable[14]", 1,
+ old->PortUsb20Enable[14],
+ new->PortUsb20Enable[14]);
+ soc_display_upd_value("PortUsb20Enable[15]", 1,
+ old->PortUsb20Enable[15],
+ new->PortUsb20Enable[15]);
+ soc_display_upd_value("PortUsb30Enable[0]", 1, old->PortUsb30Enable[0],
+ new->PortUsb30Enable[0]);
+ soc_display_upd_value("PortUsb30Enable[1]", 1, old->PortUsb30Enable[1],
+ new->PortUsb30Enable[1]);
+ soc_display_upd_value("PortUsb30Enable[2]", 1, old->PortUsb30Enable[2],
+ new->PortUsb30Enable[2]);
+ soc_display_upd_value("PortUsb30Enable[3]", 1, old->PortUsb30Enable[3],
+ new->PortUsb30Enable[3]);
+ soc_display_upd_value("PortUsb30Enable[4]", 1, old->PortUsb30Enable[4],
+ new->PortUsb30Enable[4]);
+ soc_display_upd_value("PortUsb30Enable[5]", 1, old->PortUsb30Enable[5],
+ new->PortUsb30Enable[5]);
+ soc_display_upd_value("PortUsb30Enable[6]", 1, old->PortUsb30Enable[6],
+ new->PortUsb30Enable[6]);
+ soc_display_upd_value("PortUsb30Enable[7]", 1, old->PortUsb30Enable[7],
+ new->PortUsb30Enable[7]);
+ soc_display_upd_value("PortUsb30Enable[8]", 1, old->PortUsb30Enable[8],
+ new->PortUsb30Enable[8]);
+ soc_display_upd_value("PortUsb30Enable[9]", 1, old->PortUsb30Enable[9],
+ new->PortUsb30Enable[9]);
+ soc_display_upd_value("XdciEnable", 1, old->XdciEnable,
+ new->XdciEnable);
+ soc_display_upd_value("SsicPortEnable", 1, old->SsicPortEnable,
+ new->SsicPortEnable);
+ soc_display_upd_value("SmbusEnable", 1, old->SmbusEnable,
+ new->SmbusEnable);
+ soc_display_upd_value("SerialIoDevMode[0]", 1, old->SerialIoDevMode[0],
+ new->SerialIoDevMode[0]);
+ soc_display_upd_value("SerialIoDevMode[1]", 1, old->SerialIoDevMode[1],
+ new->SerialIoDevMode[1]);
+ soc_display_upd_value("SerialIoDevMode[2]", 1, old->SerialIoDevMode[2],
+ new->SerialIoDevMode[2]);
+ soc_display_upd_value("SerialIoDevMode[3]", 1, old->SerialIoDevMode[3],
+ new->SerialIoDevMode[3]);
+ soc_display_upd_value("SerialIoDevMode[4]", 1, old->SerialIoDevMode[4],
+ new->SerialIoDevMode[4]);
+ soc_display_upd_value("SerialIoDevMode[5]", 1, old->SerialIoDevMode[5],
+ new->SerialIoDevMode[5]);
+ soc_display_upd_value("SerialIoDevMode[6]", 1, old->SerialIoDevMode[6],
+ new->SerialIoDevMode[6]);
+ soc_display_upd_value("SerialIoDevMode[7]", 1, old->SerialIoDevMode[7],
+ new->SerialIoDevMode[7]);
+ soc_display_upd_value("SerialIoDevMode[8]", 1, old->SerialIoDevMode[8],
+ new->SerialIoDevMode[8]);
+ soc_display_upd_value("SerialIoDevMode[9]", 1, old->SerialIoDevMode[9],
+ new->SerialIoDevMode[9]);
+ soc_display_upd_value("SerialIoDevMode[10]", 1,
+ old->SerialIoDevMode[10],
+ new->SerialIoDevMode[10]);
+ soc_display_upd_value("Cio2Enable", 1, old->Cio2Enable,
+ new->Cio2Enable);
+ soc_display_upd_value("ScsEmmcEnabled", 1, old->ScsEmmcEnabled,
+ new->ScsEmmcEnabled);
+ soc_display_upd_value("ScsEmmcHs400Enabled", 1,
+ old->ScsEmmcHs400Enabled,
+ new->ScsEmmcHs400Enabled);
+ soc_display_upd_value("ScsSdCardEnabled", 1, old->ScsSdCardEnabled,
+ new->ScsSdCardEnabled);
+ soc_display_upd_value("IshEnable", 1, old->IshEnable, new->IshEnable);
+ soc_display_upd_value("ShowSpiController", 1, old->ShowSpiController,
+ new->ShowSpiController);
+ soc_display_upd_value("PttSwitch", 1, old->PttSwitch, new->PttSwitch);
+ soc_display_upd_value("HeciTimeouts", 1, old->HeciTimeouts,
+ new->HeciTimeouts);
+ soc_display_upd_value("HsioMessaging", 1, old->HsioMessaging,
+ new->HsioMessaging);
+ soc_display_upd_value("Heci3Enabled", 1, old->Heci3Enabled,
+ new->Heci3Enabled);
+ soc_display_upd_value("IgdDvmt50PreAlloc", 1, old->IgdDvmt50PreAlloc,
+ new->IgdDvmt50PreAlloc);
+ soc_display_upd_value("PrimaryDisplay", 1, old->PrimaryDisplay,
+ new->PrimaryDisplay);
+ soc_display_upd_value("InternalGfx", 1, old->InternalGfx,
+ new->InternalGfx);
+ soc_display_upd_value("ApertureSize", 1, old->ApertureSize,
+ new->ApertureSize);
+ soc_display_upd_value("SkipExtGfxScan", 1, old->SkipExtGfxScan,
+ new->SkipExtGfxScan);
+ soc_display_upd_value("ScanExtGfxForLegacyOpRom", 1,
+ old->ScanExtGfxForLegacyOpRom,
+ new->ScanExtGfxForLegacyOpRom);
}
-
-#endif
-void __attribute__((weak)) mainboard_pre_console_init(void) {}
diff --git a/src/soc/intel/skylake/romstage/smbus.c b/src/soc/intel/skylake/romstage/smbus.c
index f09459bedd..b72255f7f6 100644
--- a/src/soc/intel/skylake/romstage/smbus.c
+++ b/src/soc/intel/skylake/romstage/smbus.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/io.h>
diff --git a/src/soc/intel/skylake/romstage/spi.c b/src/soc/intel/skylake/romstage/spi.c
index a2c5d33a75..206350bffd 100644
--- a/src/soc/intel/skylake/romstage/spi.c
+++ b/src/soc/intel/skylake/romstage/spi.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,16 +15,13 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/io.h>
#include <console/console.h>
-#include <device/pci_ids.h>
-#include <device/pci_def.h>
#include <delay.h>
#include <soc/spi.h>
-#include <soc/rcba.h>
#include <soc/romstage.h>
#define SPI_DELAY 10 /* 10us */
@@ -31,43 +29,47 @@
static int early_spi_read_block(u32 offset, u8 size, u8 *buffer)
{
- u32 *ptr32 = (u32*)buffer;
+ u32 *ptr32 = (u32 *)buffer;
u32 i;
+ u16 hsfs, hsfc;
+ void *spibar = get_spi_bar();
/* Clear status bits */
- SPIBAR16(SPIBAR_HSFS) |= SPIBAR_HSFS_AEL | SPIBAR_HSFS_FCERR |
- SPIBAR_HSFS_FDONE;
+ hsfs = read16(spibar + SPIBAR_HSFS);
+ write16(spibar + SPIBAR_HSFS, hsfs | SPIBAR_HSFS_AEL |
+ SPIBAR_HSFS_FCERR | SPIBAR_HSFS_FDONE);
- if (SPIBAR16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) {
+ if (read16(spibar + SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) {
printk(BIOS_ERR, "SPI ERROR: transaction in progress\n");
return -1;
}
/* Set flash address */
- SPIBAR32(SPIBAR_FADDR) = offset;
+ write32(spibar + SPIBAR_FADDR, offset);
/* Setup read transaction */
- SPIBAR16(SPIBAR_HSFC) = SPIBAR_HSFC_BYTE_COUNT(size) |
- SPIBAR_HSFC_CYCLE_READ;
+ write16(spibar + SPIBAR_HSFC, SPIBAR_HSFC_BYTE_COUNT(size) |
+ SPIBAR_HSFC_CYCLE_READ);
- /* Start transaction */
- SPIBAR16(SPIBAR_HSFC) |= SPIBAR_HSFC_GO;
+ /* Start transactinon */
+ hsfc = read16(spibar + SPIBAR_HSFC);
+ write16(spibar + SPIBAR_HSFC, hsfc | SPIBAR_HSFC_GO);
/* Wait for completion */
for (i = 0; i < SPI_RETRY; i++) {
- if (SPIBAR16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) {
+ if (read16(spibar + SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) {
/* Cycle in progress, wait 1ms */
udelay(SPI_DELAY);
continue;
}
- if (SPIBAR16(SPIBAR_HSFS) & SPIBAR_HSFS_AEL) {
+ if (read16(spibar + SPIBAR_HSFS) & SPIBAR_HSFS_AEL) {
printk(BIOS_ERR, "SPI ERROR: Access Error\n");
return -1;
}
- if (SPIBAR16(SPIBAR_HSFS) & SPIBAR_HSFS_FCERR) {
+ if (read16(spibar + SPIBAR_HSFS) & SPIBAR_HSFS_FCERR) {
printk(BIOS_ERR, "SPI ERROR: Flash Cycle Error\n");
return -1;
}
@@ -80,14 +82,18 @@ static int early_spi_read_block(u32 offset, u8 size, u8 *buffer)
}
/* Read the data */
- for (i = 0; i < size; i+=sizeof(u32)) {
+ for (i = 0; i < size; i += sizeof(u32)) {
if (size-i >= 4) {
/* reading >= dword */
- *ptr32++ = SPIBAR32(SPIBAR_FDATA(i/sizeof(u32)));
+ *ptr32++ = read32(spibar +
+ SPIBAR_FDATA(i/sizeof(u32)));
} else {
/* reading < dword */
- u8 j, *ptr8 = (u8*)ptr32;
- u32 temp = SPIBAR32(SPIBAR_FDATA(i/sizeof(u32)));
+ u8 j, *ptr8 = (u8 *)ptr32;
+ u32 temp;
+
+ temp = read32(spibar +
+ SPIBAR_FDATA(i/sizeof(u32)));
for (j = 0; j < (size-i); j++) {
*ptr8++ = temp & 0xff;
temp >>= 8;
@@ -122,18 +128,19 @@ int early_spi_read(u32 offset, u32 size, u8 *buffer)
int early_spi_read_wpsr(u8 *sr)
{
int retry;
+ void *spibar = get_spi_bar();
/* No address associated with rdsr */
- SPIBAR8(SPIBAR_OPTYPE) = 0x0;
+ write8(spibar + SPIBAR_OPTYPE, 0x0);
/* Setup opcode[0] = read wpsr */
- SPIBAR8(SPIBAR_OPMENU_LOWER) = 0x5;
+ write8(spibar + SPIBAR_OPMENU_LOWER, 0x5);
/* Start transaction */
- SPIBAR16(SPIBAR_SSFC) = SPIBAR_SSFC_DATA | SPIBAR_SSFC_GO;
+ write16(spibar + SPIBAR_SSFC, SPIBAR_SSFC_DATA | SPIBAR_SSFC_GO);
/* Wait for error / complete status */
for (retry = SPI_RETRY; retry; retry--) {
- u16 status = SPIBAR16(SPIBAR_SSFS);
+ u16 status = read16(spibar + SPIBAR_SSFS);
if (status & SPIBAR_SSFS_ERROR) {
printk(BIOS_ERR, "SPI rdsr failed\n");
return -1;
@@ -143,7 +150,9 @@ int early_spi_read_wpsr(u8 *sr)
udelay(SPI_DELAY);
}
-
- *sr = SPIBAR32(SPIBAR_FDATA(0)) & 0xff;
+ /* Flash protected range 0 register bit 31 indicates WP
+ * Bit 31[WPE] 1= WP Enable 0= WP Disable
+ */
+ *sr = (read32(spibar + SPIBAR_FPR(0)) & SPIBAR_FPR_WPE) >> 24;
return 0;
}
diff --git a/src/soc/intel/skylake/romstage/stack.c b/src/soc/intel/skylake/romstage/stack.c
deleted file mode 100644
index a81eb07639..0000000000
--- a/src/soc/intel/skylake/romstage/stack.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <stddef.h>
-#include <stdint.h>
-#include <arch/cpu.h>
-#include <arch/early_variables.h>
-#include <console/console.h>
-#include <cbmem.h>
-#include <cpu/x86/mtrr.h>
-#include <soc/romstage.h>
-
-static inline uint32_t *stack_push(u32 *stack, u32 value)
-{
- stack = &stack[-1];
- *stack = value;
- return stack;
-}
-
-/* Romstage needs quite a bit of stack for decompressing images since the lzma
- * lib keeps its state on the stack during romstage. */
-static unsigned long choose_top_of_stack(void)
-{
- unsigned long stack_top;
- const unsigned long romstage_ram_stack_size = 0x5000;
-
- /* cbmem_add() does a find() before add(). */
- stack_top = (unsigned long)cbmem_add(CBMEM_ID_ROMSTAGE_RAM_STACK,
- romstage_ram_stack_size);
- stack_top += romstage_ram_stack_size;
- return stack_top;
-}
-
-/* setup_stack_and_mttrs() determines the stack to use after
- * cache-as-ram is torn down as well as the MTRR settings to use. */
-void *setup_stack_and_mttrs(void)
-{
- unsigned long top_of_stack;
- int num_mtrrs;
- uint32_t *slot;
- uint32_t mtrr_mask_upper;
- uint32_t top_of_ram;
-
- /* Top of stack needs to be aligned to a 4-byte boundary. */
- top_of_stack = choose_top_of_stack() & ~3;
- slot = (void *)top_of_stack;
- num_mtrrs = 0;
-
- /* The upper bits of the MTRR mask need to set according to the number
- * of physical address bits. */
- mtrr_mask_upper = (1 << ((cpuid_eax(0x80000008) & 0xff) - 32)) - 1;
-
- /* The order for each MTTR is value then base with upper 32-bits of
- * each value coming before the lower 32-bits. The reasoning for
- * this ordering is to create a stack layout like the following:
- * +0: Number of MTRRs
- * +4: MTTR base 0 31:0
- * +8: MTTR base 0 63:32
- * +12: MTTR mask 0 31:0
- * +16: MTTR mask 0 63:32
- * +20: MTTR base 1 31:0
- * +24: MTTR base 1 63:32
- * +28: MTTR mask 1 31:0
- * +32: MTTR mask 1 63:32
- */
-
- /* Cache the ROM as WP just below 4GiB. */
- slot = stack_push(slot, mtrr_mask_upper); /* upper mask */
- slot = stack_push(slot, ~(CONFIG_ROM_SIZE - 1) | MTRRphysMaskValid);
- slot = stack_push(slot, 0); /* upper base */
- slot = stack_push(slot, ~(CONFIG_ROM_SIZE - 1) | MTRR_TYPE_WRPROT);
- num_mtrrs++;
-
- /* Cache RAM as WB from 0 -> CONFIG_RAMTOP. */
- slot = stack_push(slot, mtrr_mask_upper); /* upper mask */
- slot = stack_push(slot, ~(CONFIG_RAMTOP - 1) | MTRRphysMaskValid);
- slot = stack_push(slot, 0); /* upper base */
- slot = stack_push(slot, 0 | MTRR_TYPE_WRBACK);
- num_mtrrs++;
-
- top_of_ram = (uint32_t)cbmem_top();
- /* Cache 8MiB below the top of ram. The top of ram under 4GiB is the
- * start of the TSEG region. It is required to be 8MiB aligned. Set
- * this area as cacheable so it can be used later for ramstage before
- * setting up the entire RAM as cacheable. */
- slot = stack_push(slot, mtrr_mask_upper); /* upper mask */
- slot = stack_push(slot, ~((8 << 20) - 1) | MTRRphysMaskValid);
- slot = stack_push(slot, 0); /* upper base */
- slot = stack_push(slot, (top_of_ram - (8 << 20)) | MTRR_TYPE_WRBACK);
- num_mtrrs++;
-
- /* Cache 8MiB at the top of ram. Top of ram is where the TSEG
- * region resides. However, it is not restricted to SMM mode until
- * SMM has been relocated. By setting the region to cacheable it
- * provides faster access when relocating the SMM handler as well
- * as using the TSEG region for other purposes. */
- slot = stack_push(slot, mtrr_mask_upper); /* upper mask */
- slot = stack_push(slot, ~((8 << 20) - 1) | MTRRphysMaskValid);
- slot = stack_push(slot, 0); /* upper base */
- slot = stack_push(slot, top_of_ram | MTRR_TYPE_WRBACK);
- num_mtrrs++;
-
- /* Save the number of MTTRs to setup. Return the stack location
- * pointing to the number of MTRRs. */
- slot = stack_push(slot, num_mtrrs);
-
- return slot;
-}
diff --git a/src/soc/intel/skylake/romstage/systemagent.c b/src/soc/intel/skylake/romstage/systemagent.c
index 7a43917601..36f68712c4 100644
--- a/src/soc/intel/skylake/romstage/systemagent.c
+++ b/src/soc/intel/skylake/romstage/systemagent.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2010 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <stdlib.h>
diff --git a/src/soc/intel/skylake/romstage/uart.c b/src/soc/intel/skylake/romstage/uart.c
index 96c96343f1..8ddcbadda8 100644
--- a/src/soc/intel/skylake/romstage/uart.c
+++ b/src/soc/intel/skylake/romstage/uart.c
@@ -1,7 +1,8 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Google Inc.
+ * Copyright (C) 2015 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,72 +15,61 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
-#include <arch/early_variables.h>
#include <arch/io.h>
-#include <delay.h>
#include <device/pci_def.h>
-#include <reg_script.h>
#include <stdint.h>
-#include <uart8250.h>
-#include <soc/iobp.h>
+#include <soc/pci_devs.h>
+#include <soc/pcr.h>
+#include <soc/romstage.h>
#include <soc/serialio.h>
-const struct reg_script uart_init[] = {
- /* Set MMIO BAR */
- REG_PCI_WRITE32(PCI_BASE_ADDRESS_0, CONFIG_TTYS0_BASE),
- /* Enable Memory access and Bus Master */
- REG_PCI_OR32(PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER),
- /* Initialize LTR */
- REG_MMIO_RMW32(CONFIG_TTYS0_BASE + SIO_REG_PPR_GEN,
- ~SIO_REG_PPR_GEN_LTR_MODE_MASK, 0),
- REG_MMIO_RMW32(CONFIG_TTYS0_BASE + SIO_REG_PPR_RST,
- ~(SIO_REG_PPR_RST_ASSERT), 0),
- /* Take UART out of reset */
- REG_MMIO_OR32(CONFIG_TTYS0_BASE + SIO_REG_PPR_RST,
- SIO_REG_PPR_RST_ASSERT),
- /* Set M and N divisor inputs and enable clock */
- REG_MMIO_WRITE32(CONFIG_TTYS0_BASE + SIO_REG_PPR_CLOCK,
- SIO_REG_PPR_CLOCK_EN | SIO_REG_PPR_CLOCK_UPDATE |
- (SIO_REG_PPR_CLOCK_N_DIV << 16) |
- (SIO_REG_PPR_CLOCK_M_DIV << 1)),
- REG_SCRIPT_END
-};
-
void pch_uart_init(void)
{
- /* Program IOBP CB000154h[12,9:8,4:0] = 1001100011111b */
- u32 gpiodf = 0x131f;
device_t dev;
+ u32 tmp, legacy;
+ u8 *base = (u8 *)CONFIG_TTYS0_BASE;
- /* Put UART in byte access mode for 16550 compatibility */
switch (CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER) {
case 0:
dev = PCH_DEV_UART0;
- gpiodf |= SIO_IOBP_GPIODF_UART0_BYTE_ACCESS;
+ legacy = SIO_PCH_LEGACY_UART0;
break;
case 1:
dev = PCH_DEV_UART1;
- gpiodf |= SIO_IOBP_GPIODF_UART1_BYTE_ACCESS;
+ legacy = SIO_PCH_LEGACY_UART1;
+ break;
+ case 2:
+ dev = PCH_DEV_UART2;
+ legacy = SIO_PCH_LEGACY_UART2;
break;
default:
return;
}
- /* Program IOBP GPIODF */
- pch_iobp_update(SIO_IOBP_GPIODF, ~gpiodf, gpiodf);
+ /* Set configured UART base address */
+ pci_write_config32(dev, PCI_BASE_ADDRESS_0, (u32)base);
- /* Program IOBP CB000180h[5:0] = 111111b (undefined register) */
- pch_iobp_update(0xcb000180, ~0x0000003f, 0x0000003f);
+ /* Enable memory access and bus master */
+ tmp = pci_read_config32(dev, PCI_COMMAND);
+ tmp |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ pci_write_config32(dev, PCI_COMMAND, tmp);
- /* Initialize chipset uart interface */
- reg_script_run_on_dev(dev, uart_init);
+ /* Take UART out of reset */
+ tmp = read32(base + SIO_REG_PPR_RESETS);
+ tmp |= SIO_REG_PPR_RESETS_FUNC | SIO_REG_PPR_RESETS_APB |
+ SIO_REG_PPR_RESETS_IDMA;
+ write32(base + SIO_REG_PPR_RESETS, tmp);
+
+ /* Set M and N divisor inputs and enable clock */
+ tmp = read32(base + SIO_REG_PPR_CLOCK);
+ tmp |= SIO_REG_PPR_CLOCK_EN | SIO_REG_PPR_CLOCK_UPDATE |
+ (SIO_REG_PPR_CLOCK_N_DIV << 16) |
+ (SIO_REG_PPR_CLOCK_M_DIV << 1);
+ write32(base + SIO_REG_PPR_CLOCK, tmp);
- /*
- * Perform standard UART initialization
- * Divisor 1 is 115200 BAUD
- */
- uart8250_mem_init(CONFIG_TTYS0_BASE, 1);
+ /* Put UART in byte access mode for 16550 compatibility */
+ pcr_andthenor32(PID_SERIALIO, R_PCH_PCR_SERIAL_IO_GPPRVRW7, 0, legacy);
}
diff --git a/src/soc/intel/skylake/sata.c b/src/soc/intel/skylake/sata.c
deleted file mode 100644
index d3cf52527d..0000000000
--- a/src/soc/intel/skylake/sata.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <delay.h>
-#include <soc/iobp.h>
-#include <soc/ramstage.h>
-#include <soc/rcba.h>
-#include <soc/sata.h>
-#include <soc/intel/broadwell/chip.h>
-
-static inline u32 sir_read(struct device *dev, int idx)
-{
- pci_write_config32(dev, SATA_SIRI, idx);
- return pci_read_config32(dev, SATA_SIRD);
-}
-
-static inline void sir_write(struct device *dev, int idx, u32 value)
-{
- pci_write_config32(dev, SATA_SIRI, idx);
- pci_write_config32(dev, SATA_SIRD, value);
-}
-
-static void sata_init(struct device *dev)
-{
- config_t *config = dev->chip_info;
- u32 reg32;
- u8 *abar;
- u16 reg16;
- int port;
-
- printk(BIOS_DEBUG, "SATA: Initializing controller in AHCI mode.\n");
-
- /* Enable BARs */
- pci_write_config16(dev, PCI_COMMAND, 0x0007);
-
- /* Set Interrupt Line */
- /* Interrupt Pin is set by D31IP.PIP */
- pci_write_config8(dev, PCI_INTERRUPT_LINE, 0x0a);
-
- /* Set timings */
- pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE);
- pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE);
-
- /* for AHCI, Port Enable is managed in memory mapped space */
- reg16 = pci_read_config16(dev, 0x92);
- reg16 &= ~0xf;
- reg16 |= 0x8000 | config->sata_port_map;
- pci_write_config16(dev, 0x92, reg16);
- udelay(2);
-
- /* Setup register 98h */
- reg32 = pci_read_config32(dev, 0x98);
- reg32 &= ~((1 << 31) | (1 << 30));
- reg32 |= 1 << 23;
- reg32 |= 1 << 24; /* Enable MPHY Dynamic Power Gating */
- pci_write_config32(dev, 0x98, reg32);
-
- /* Setup register 9Ch */
- reg16 = 0; /* Disable alternate ID */
- reg16 = 1 << 5; /* BWG step 12 */
- pci_write_config16(dev, 0x9c, reg16);
-
- /* SATA Initialization register */
- reg32 = 0x183;
- reg32 |= (config->sata_port_map ^ 0xf) << 24;
- reg32 |= (config->sata_devslp_mux & 1) << 15;
- pci_write_config32(dev, 0x94, reg32);
-
- /* Initialize AHCI memory-mapped space */
- abar = (u8 *)(pci_read_config32(dev, PCI_BASE_ADDRESS_5));
- printk(BIOS_DEBUG, "ABAR: %p\n", abar);
-
- /* CAP (HBA Capabilities) : enable power management */
- reg32 = read32(abar + 0x00);
- reg32 |= 0x0c006000; /* set PSC+SSC+SALP+SSS */
- reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */
- reg32 |= (1 << 18); /* SAM: SATA AHCI MODE ONLY */
- write32(abar + 0x00, reg32);
-
- /* PI (Ports implemented) */
- write32(abar + 0x0c, config->sata_port_map);
- (void) read32(abar + 0x0c); /* Read back 1 */
- (void) read32(abar + 0x0c); /* Read back 2 */
-
- /* CAP2 (HBA Capabilities Extended)*/
- if (config->sata_devslp_disable) {
- reg32 = read32(abar + 0x24);
- reg32 &= ~(1 << 3);
- write32(abar + 0x24, reg32);
- } else {
- /* Enable DEVSLP */
- reg32 = read32(abar + 0x24);
- reg32 |= (1 << 5)|(1 << 4)|(1 << 3)|(1 << 2);
- write32(abar + 0x24, reg32);
-
- for (port = 0; port < 4; port++) {
- if (!(config->sata_port_map & (1 << port)))
- continue;
- reg32 = read32(abar + 0x144 + (0x80 * port));
- reg32 |= (1 << 1); /* DEVSLP DSP */
- write32(abar + 0x144 + (0x80 * port), reg32);
- }
- }
-
- /*
- * Static Power Gating for unused ports
- */
- reg32 = RCBA32(0x3a84);
- /* Port 3 and 2 disabled */
- if ((config->sata_port_map & ((1 << 3)|(1 << 2))) == 0)
- reg32 |= (1 << 24) | (1 << 26);
- /* Port 1 and 0 disabled */
- if ((config->sata_port_map & ((1 << 1)|(1 << 0))) == 0)
- reg32 |= (1 << 20) | (1 << 18);
- RCBA32(0x3a84) = reg32;
-
- /* Set Gen3 Transmitter settings if needed */
- if (config->sata_port0_gen3_tx)
- pch_iobp_update(SATA_IOBP_SP0_SECRT88,
- ~(SATA_SECRT88_VADJ_MASK <<
- SATA_SECRT88_VADJ_SHIFT),
- (config->sata_port0_gen3_tx &
- SATA_SECRT88_VADJ_MASK)
- << SATA_SECRT88_VADJ_SHIFT);
-
- if (config->sata_port1_gen3_tx)
- pch_iobp_update(SATA_IOBP_SP1_SECRT88,
- ~(SATA_SECRT88_VADJ_MASK <<
- SATA_SECRT88_VADJ_SHIFT),
- (config->sata_port1_gen3_tx &
- SATA_SECRT88_VADJ_MASK)
- << SATA_SECRT88_VADJ_SHIFT);
-
- /* Set Gen3 DTLE DATA / EDGE registers if needed */
- if (config->sata_port0_gen3_dtle) {
- pch_iobp_update(SATA_IOBP_SP0DTLE_DATA,
- ~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT),
- (config->sata_port0_gen3_dtle & SATA_DTLE_MASK)
- << SATA_DTLE_DATA_SHIFT);
-
- pch_iobp_update(SATA_IOBP_SP0DTLE_EDGE,
- ~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT),
- (config->sata_port0_gen3_dtle & SATA_DTLE_MASK)
- << SATA_DTLE_EDGE_SHIFT);
- }
-
- if (config->sata_port1_gen3_dtle) {
- pch_iobp_update(SATA_IOBP_SP1DTLE_DATA,
- ~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT),
- (config->sata_port1_gen3_dtle & SATA_DTLE_MASK)
- << SATA_DTLE_DATA_SHIFT);
-
- pch_iobp_update(SATA_IOBP_SP1DTLE_EDGE,
- ~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT),
- (config->sata_port1_gen3_dtle & SATA_DTLE_MASK)
- << SATA_DTLE_EDGE_SHIFT);
- }
-
- /*
- * Additional Programming Requirements for Power Optimizer
- */
-
- /* Step 1 */
- sir_write(dev, 0x64, 0x883c9003);
-
- /* Step 2: SIR 68h[15:0] = 880Ah */
- reg32 = sir_read(dev, 0x68);
- reg32 &= 0xffff0000;
- reg32 |= 0x880a;
- sir_write(dev, 0x68, reg32);
-
- /* Step 3: SIR 60h[3] = 1 */
- reg32 = sir_read(dev, 0x60);
- reg32 |= (1 << 3);
- sir_write(dev, 0x60, reg32);
-
- /* Step 4: SIR 60h[0] = 1 */
- reg32 = sir_read(dev, 0x60);
- reg32 |= (1 << 0);
- sir_write(dev, 0x60, reg32);
-
- /* Step 5: SIR 60h[1] = 1 */
- reg32 = sir_read(dev, 0x60);
- reg32 |= (1 << 1);
- sir_write(dev, 0x60, reg32);
-
- /* Clock Gating */
- sir_write(dev, 0x70, 0x3f00bf1f);
- sir_write(dev, 0x54, 0xcf000f0f);
- sir_write(dev, 0x58, 0x00190000);
- RCBA32_AND_OR(0x333c, 0xffcfffff, 0x00c00000);
-
- reg32 = pci_read_config32(dev, 0x300);
- reg32 |= (1 << 17) | (1 << 16) | (1 << 19);
- reg32 |= (1 << 31) | (1 << 30) | (1 << 29);
- pci_write_config32(dev, 0x300, reg32);
-
- reg32 = pci_read_config32(dev, 0x98);
- reg32 |= 1 << 29;
- pci_write_config32(dev, 0x98, reg32);
-
- /* Register Lock */
- reg32 = pci_read_config32(dev, 0x9c);
- reg32 |= (1 << 31);
- pci_write_config32(dev, 0x9c, reg32);
-}
-
-/*
- * Set SATA controller mode early so the resource allocator can
- * properly assign IO/Memory resources for the controller.
- */
-static void sata_enable(device_t dev)
-{
- /* Get the chip configuration */
- config_t *config = dev->chip_info;
- u16 map = 0x0060;
-
- map |= (config->sata_port_map ^ 0xf) << 8;
-
- pci_write_config16(dev, 0x90, map);
-}
-
-static struct device_operations sata_ops = {
- .read_resources = &pci_dev_read_resources,
- .set_resources = &pci_dev_set_resources,
- .enable_resources = &pci_dev_enable_resources,
- .init = &sata_init,
- .enable = &sata_enable,
- .ops_pci = &broadwell_pci_ops,
-};
-
-static const unsigned short pci_device_ids[] = {
- 0x9c03, 0x9c05, 0x9c07, 0x9c0f, /* LynxPoint-LP */
- 0x9c83, 0x9c85, 0x282a, 0x9c87, 0x282a, 0x9c8f, /* WildcatPoint */
- 0
-};
-
-static const struct pci_driver pch_sata __pci_driver = {
- .ops = &sata_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .devices = pci_device_ids,
-};
diff --git a/src/soc/intel/skylake/serialio.c b/src/soc/intel/skylake/serialio.c
deleted file mode 100644
index 6eba7ac020..0000000000
--- a/src/soc/intel/skylake/serialio.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <arch/io.h>
-#include <cbmem.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pciexp.h>
-#include <device/pci_ids.h>
-#include <stdlib.h>
-#include <soc/iobp.h>
-#include <soc/nvs.h>
-#include <soc/pci_devs.h>
-#include <soc/pch.h>
-#include <soc/ramstage.h>
-#include <soc/rcba.h>
-#include <soc/serialio.h>
-#include <soc/intel/broadwell/chip.h>
-
-/* Set D3Hot Power State in ACPI mode */
-static void serialio_enable_d3hot(struct resource *res)
-{
- u32 reg32 = read32(res2mmio(res, PCH_PCS, 0));
- reg32 |= PCH_PCS_PS_D3HOT;
- write32(res2mmio(res, PCH_PCS, 0), reg32);
-}
-
-static int serialio_uart_is_debug(struct device *dev)
-{
-#if CONFIG_INTEL_PCH_UART_CONSOLE
- switch (dev->path.pci.devfn) {
- case PCH_DEVFN_UART0: /* UART0 */
- return !!(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 0);
- case PCH_DEVFN_UART1: /* UART1 */
- return !!(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 1);
- }
-#endif
- return 0;
-}
-
-/* Enable clock in PCI mode */
-static void serialio_enable_clock(struct resource *bar0)
-{
- u32 reg32 = read32(res2mmio(bar0, SIO_REG_PPR_CLOCK, 0));
- reg32 |= SIO_REG_PPR_CLOCK_EN;
- write32(res2mmio(bar0, SIO_REG_PPR_CLOCK, 0), reg32);
-}
-
-/* Put Serial IO D21:F0-F6 device into desired mode. */
-static void serialio_d21_mode(int sio_index, int int_pin, int acpi_mode)
-{
- u32 portctrl = SIO_IOBP_PORTCTRL_PM_CAP_PRSNT;
-
- /* Snoop select 1. */
- portctrl |= SIO_IOBP_PORTCTRL_SNOOP_SELECT(1);
-
- /* Set interrupt pin. */
- portctrl |= SIO_IOBP_PORTCTRL_INT_PIN(int_pin);
-
- if (acpi_mode) {
- /* Enable ACPI interrupt mode. */
- portctrl |= SIO_IOBP_PORTCTRL_ACPI_IRQ_EN;
-
- /* Disable PCI config space. */
- portctrl |= SIO_IOBP_PORTCTRL_PCI_CONF_DIS;
- }
-
- pch_iobp_update(SIO_IOBP_PORTCTRLX(sio_index), 0, portctrl);
-}
-
-/* Put Serial IO D23:F0 device into desired mode. */
-static void serialio_d23_mode(int acpi_mode)
-{
- u32 portctrl = 0;
-
- /* Snoop select 1. */
- pch_iobp_update(SIO_IOBP_PORTCTRL1, 0,
- SIO_IOBP_PORTCTRL1_SNOOP_SELECT(1));
-
- if (acpi_mode) {
- /* Enable ACPI interrupt mode. */
- portctrl |= SIO_IOBP_PORTCTRL0_ACPI_IRQ_EN;
-
- /* Disable PCI config space. */
- portctrl |= SIO_IOBP_PORTCTRL0_PCI_CONF_DIS;
- }
-
- pch_iobp_update(SIO_IOBP_PORTCTRL0, 0, portctrl);
-}
-
-/* Enable LTR Auto Mode for D21:F1-F6. */
-static void serialio_d21_ltr(struct resource *bar0)
-{
- u32 reg;
-
- /* 1. Program BAR0 + 808h[2] = 0b */
- reg = read32(res2mmio(bar0, SIO_REG_PPR_GEN, 0));
- reg &= ~SIO_REG_PPR_GEN_LTR_MODE_MASK;
- write32(res2mmio(bar0, SIO_REG_PPR_GEN, 0), reg);
-
- /* 2. Program BAR0 + 804h[1:0] = 00b */
- reg = read32(res2mmio(bar0, SIO_REG_PPR_RST, 0));
- reg &= ~SIO_REG_PPR_RST_ASSERT;
- write32(res2mmio(bar0, SIO_REG_PPR_RST, 0), reg);
-
- /* 3. Program BAR0 + 804h[1:0] = 11b */
- reg = read32(res2mmio(bar0, SIO_REG_PPR_RST, 0));
- reg |= SIO_REG_PPR_RST_ASSERT;
- write32(res2mmio(bar0, SIO_REG_PPR_RST, 0), reg);
-
- /* 4. Program BAR0 + 814h[31:0] = 00000000h */
- write32(res2mmio(bar0, SIO_REG_AUTO_LTR, 0), 0);
-}
-
-/* Enable LTR Auto Mode for D23:F0. */
-static void serialio_d23_ltr(struct resource *bar0)
-{
- u32 reg;
-
- /* Program BAR0 + 1008h[2] = 1b */
- reg = read32(res2mmio(bar0, SIO_REG_SDIO_PPR_GEN, 0));
- reg |= SIO_REG_PPR_GEN_LTR_MODE_MASK;
- write32(res2mmio(bar0, SIO_REG_SDIO_PPR_GEN, 0), reg);
-
- /* Program BAR0 + 1010h = 0x00000000 */
- write32(res2mmio(bar0, SIO_REG_SDIO_PPR_SW_LTR, 0), 0);
-
- /* Program BAR0 + 3Ch[30] = 1b */
- reg = read32(res2mmio(bar0, SIO_REG_SDIO_PPR_CMD12, 0));
- reg |= SIO_REG_SDIO_PPR_CMD12_B30;
- write32(res2mmio(bar0, SIO_REG_SDIO_PPR_CMD12, 0), reg);
-}
-
-/* Select I2C voltage of 1.8V or 3.3V. */
-static void serialio_i2c_voltage_sel(struct resource *bar0, u8 voltage)
-{
- u32 reg32 = read32(res2mmio(bar0, SIO_REG_PPR_GEN, 0));
- reg32 &= ~SIO_REG_PPR_GEN_VOLTAGE_MASK;
- reg32 |= SIO_REG_PPR_GEN_VOLTAGE(voltage);
- write32(res2mmio(bar0, SIO_REG_PPR_GEN, 0), reg32);
-}
-
-/* Init sequence to be run once, done as part of D21:F0 (SDMA) init. */
-static void serialio_init_once(int acpi_mode)
-{
- if (acpi_mode) {
- /* Enable ACPI IRQ for IRQ13, IRQ7, IRQ6, IRQ5 in RCBA. */
- RCBA32_OR(ACPIIRQEN, (1 << 13)|(1 << 7)|(1 << 6)|(1 << 5));
- }
-
- /* Program IOBP CB000154h[12,9:8,4:0] = 1001100011111b. */
- pch_iobp_update(SIO_IOBP_GPIODF, ~0x0000131f, 0x0000131f);
-
- /* Program IOBP CB000180h[5:0] = 111111b (undefined register) */
- pch_iobp_update(0xcb000180, ~0x0000003f, 0x0000003f);
-}
-
-static void serialio_init(struct device *dev)
-{
- config_t *config = dev->chip_info;
- struct resource *bar0, *bar1;
- int sio_index = -1;
- u32 reg32;
-
- printk(BIOS_DEBUG, "Initializing Serial IO device\n");
-
- /* Ensure memory and bus master are enabled */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config32(dev, PCI_COMMAND, reg32);
-
- /* Find BAR0 and BAR1 */
- bar0 = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (!bar0)
- return;
- bar1 = find_resource(dev, PCI_BASE_ADDRESS_1);
- if (!bar1)
- return;
-
- if (!config->sio_acpi_mode)
- serialio_enable_clock(bar0);
-
- switch (dev->path.pci.devfn) {
- case PCH_DEVFN_SDMA: /* SDMA */
- sio_index = SIO_ID_SDMA;
- serialio_init_once(config->sio_acpi_mode);
- serialio_d21_mode(sio_index, SIO_PIN_INTB,
- config->sio_acpi_mode);
- break;
- case PCH_DEVFN_I2C0: /* I2C0 */
- sio_index = SIO_ID_I2C0;
- serialio_d21_ltr(bar0);
- serialio_i2c_voltage_sel(bar0, config->sio_i2c0_voltage);
- serialio_d21_mode(sio_index, SIO_PIN_INTC,
- config->sio_acpi_mode);
- break;
- case PCH_DEVFN_I2C1: /* I2C1 */
- sio_index = SIO_ID_I2C1;
- serialio_d21_ltr(bar0);
- serialio_i2c_voltage_sel(bar0, config->sio_i2c1_voltage);
- serialio_d21_mode(sio_index, SIO_PIN_INTC,
- config->sio_acpi_mode);
- break;
- case PCH_DEVFN_SPI0: /* SPI0 */
- sio_index = SIO_ID_SPI0;
- serialio_d21_ltr(bar0);
- serialio_d21_mode(sio_index, SIO_PIN_INTC,
- config->sio_acpi_mode);
- break;
- case PCH_DEVFN_SPI1: /* SPI1 */
- sio_index = SIO_ID_SPI1;
- serialio_d21_ltr(bar0);
- serialio_d21_mode(sio_index, SIO_PIN_INTC,
- config->sio_acpi_mode);
- break;
- case PCH_DEVFN_UART0: /* UART0 */
- sio_index = SIO_ID_UART0;
- if (!serialio_uart_is_debug(dev))
- serialio_d21_ltr(bar0);
- serialio_d21_mode(sio_index, SIO_PIN_INTD,
- config->sio_acpi_mode);
- break;
- case PCH_DEVFN_UART1: /* UART1 */
- sio_index = SIO_ID_UART1;
- if (!serialio_uart_is_debug(dev))
- serialio_d21_ltr(bar0);
- serialio_d21_mode(sio_index, SIO_PIN_INTD,
- config->sio_acpi_mode);
- break;
- case PCH_DEVFN_SDIO: /* SDIO */
- sio_index = SIO_ID_SDIO;
- serialio_d23_ltr(bar0);
- serialio_d23_mode(config->sio_acpi_mode);
- break;
- default:
- return;
- }
-
- if (config->sio_acpi_mode) {
- global_nvs_t *gnvs;
-
- /* Find ACPI NVS to update BARs */
- gnvs = (global_nvs_t *)cbmem_find(CBMEM_ID_ACPI_GNVS);
- if (!gnvs) {
- printk(BIOS_ERR, "Unable to locate Global NVS\n");
- return;
- }
-
- /* Save BAR0 and BAR1 to ACPI NVS */
- gnvs->dev.bar0[sio_index] = (u32)bar0->base;
- gnvs->dev.bar1[sio_index] = (u32)bar1->base;
-
- /* Do not enable UART if it is used as debug port */
- if (!serialio_uart_is_debug(dev))
- gnvs->dev.enable[sio_index] = 1;
-
- /* Put device in D3hot state via BAR1 */
- if (dev->path.pci.devfn != PCH_DEVFN_SDMA)
- serialio_enable_d3hot(bar1); /* all but SDMA */
- }
-}
-
-static void serialio_set_resources(struct device *dev)
-{
- pci_dev_set_resources(dev);
-
-#if CONFIG_INTEL_PCH_UART_CONSOLE
- /* Update UART base address if used for debug */
- if (serialio_uart_is_debug(dev)) {
- struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res)
- uartmem_setbaseaddr(res->base);
- }
-#endif
-}
-
-static struct device_operations device_ops = {
- .read_resources = &pci_dev_read_resources,
- .set_resources = &serialio_set_resources,
- .enable_resources = &pci_dev_enable_resources,
- .init = &serialio_init,
- .ops_pci = &broadwell_pci_ops,
-};
-
-static const unsigned short pci_device_ids[] = {
- 0x9c60, 0x9ce0, /* 0:15.0 - SDMA */
- 0x9c61, 0x9ce1, /* 0:15.1 - I2C0 */
- 0x9c62, 0x9ce2, /* 0:15.2 - I2C1 */
- 0x9c65, 0x9ce5, /* 0:15.3 - SPI0 */
- 0x9c66, 0x9ce6, /* 0:15.4 - SPI1 */
- 0x9c63, 0x9ce3, /* 0:15.5 - UART0 */
- 0x9c64, 0x9ce4, /* 0:15.6 - UART1 */
- 0x9c35, 0x9cb5, /* 0:17.0 - SDIO */
- 0
-};
-
-static const struct pci_driver pch_pcie __pci_driver = {
- .ops = &device_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .devices = pci_device_ids,
-};
diff --git a/src/soc/intel/skylake/smbus.c b/src/soc/intel/skylake/smbus.c
index 0ec84b27db..872b16ba2c 100644
--- a/src/soc/intel/skylake/smbus.c
+++ b/src/soc/intel/skylake/smbus.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/io.h>
@@ -94,15 +95,14 @@ static struct device_operations smbus_ops = {
.read_resources = &smbus_read_resources,
.set_resources = &pci_dev_set_resources,
.enable_resources = &pci_dev_enable_resources,
- .scan_bus = &scan_static_bus,
+ .scan_bus = &scan_smbus,
.init = &pch_smbus_init,
.ops_smbus_bus = &lops_smbus_bus,
- .ops_pci = &broadwell_pci_ops,
+ .ops_pci = &soc_pci_ops,
};
static const unsigned short pci_device_ids[] = {
- 0x9c22, /* LynxPoint */
- 0x9ca2, /* WildcatPoint */
+ 0x9d23, /* SunRisePoint LP */
0
};
diff --git a/src/soc/intel/skylake/smbus_common.c b/src/soc/intel/skylake/smbus_common.c
index 41416c712c..fea9d805ee 100644
--- a/src/soc/intel/skylake/smbus_common.c
+++ b/src/soc/intel/skylake/smbus_common.c
@@ -4,6 +4,7 @@
* Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -16,7 +17,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <arch/io.h>
@@ -65,9 +66,9 @@ int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address)
unsigned char global_status_register;
unsigned char byte;
- if (smbus_wait_until_ready(smbus_base) < 0) {
+ if (smbus_wait_until_ready(smbus_base) < 0)
return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
- }
+
/* Setup transaction */
/* Disable interrupts */
outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
@@ -89,9 +90,8 @@ int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address)
smbus_base + SMBHSTCTL);
/* Poll for transaction completion */
- if (smbus_wait_until_done(smbus_base) < 0) {
+ if (smbus_wait_until_done(smbus_base) < 0)
return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
- }
global_status_register = inb(smbus_base + SMBHSTSTAT);
@@ -100,9 +100,8 @@ int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address)
/* Read results of transaction */
byte = inb(smbus_base + SMBHSTDAT0);
- if (global_status_register != (1 << 1)) {
+ if (global_status_register != (1 << 1))
return SMBUS_ERROR;
- }
return byte;
}
diff --git a/src/soc/intel/skylake/smi.c b/src/soc/intel/skylake/smi.c
index 85a508b629..c474e023a6 100644
--- a/src/soc/intel/skylake/smi.c
+++ b/src/soc/intel/skylake/smi.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <device/device.h>
@@ -60,7 +61,8 @@ void southbridge_smm_enable_smi(void)
enable_pm1(PWRBTN_EN | GBL_EN);
disable_gpe(PME_B0_EN);
- /* Enable SMI generation:
+ /*
+ * Enable SMI generation:
* - on APMC writes (io 0xb2)
* - on writes to SLP_EN (sleep states)
* - on writes to GBL_RLS (bios commands)
@@ -73,7 +75,7 @@ void southbridge_smm_enable_smi(void)
void southbridge_trigger_smi(void)
{
- /**
+ /*
* There are several methods of raising a controlled SMI# via
* software, among them:
* - Writes to io 0xb2 (APMC)
diff --git a/src/soc/intel/skylake/smihandler.c b/src/soc/intel/skylake/smihandler.c
index 63c93739e7..dddba56ee8 100644
--- a/src/soc/intel/skylake/smihandler.c
+++ b/src/soc/intel/skylake/smihandler.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,11 +16,12 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <delay.h>
#include <types.h>
+#include <arch/hlt.h>
#include <arch/io.h>
#include <console/console.h>
#include <cpu/x86/cache.h>
@@ -27,16 +29,16 @@
#include <cpu/x86/smm.h>
#include <spi-generic.h>
#include <elog.h>
-#include <halt.h>
#include <pc80/mc146818rtc.h>
+#include <soc/iomap.h>
#include <soc/lpc.h>
#include <soc/nvs.h>
#include <soc/pci_devs.h>
+#include <soc/pch.h>
+#include <soc/pcr.h>
#include <soc/pm.h>
-#include <soc/rcba.h>
+#include <soc/pmc.h>
#include <soc/smm.h>
-#include <soc/xhci.h>
-#include <drivers/intel/gma/i915_reg.h>
static u8 smm_initialized = 0;
@@ -55,9 +57,10 @@ int southbridge_io_trap_handler(int smif)
switch (smif) {
case 0x32:
printk(BIOS_DEBUG, "OS Init\n");
- /* gnvs->smif:
- * On success, the IO Trap Handler returns 0
- * On failure, the IO Trap Handler returns a value != 0
+ /*
+ * gnvs->smif:
+ * - On success, the IO Trap Handler returns 0
+ * - On failure, the IO Trap Handler returns a value != 0
*/
gnvs->smif = 0;
return 1; /* IO trap handled */
@@ -67,9 +70,7 @@ int southbridge_io_trap_handler(int smif)
return 0;
}
-/**
- * @brief Set the EOS bit
- */
+/* Set the EOS bit */
void southbridge_smi_set_eos(void)
{
enable_smi(EOS);
@@ -77,78 +78,39 @@ void southbridge_smi_set_eos(void)
static void busmaster_disable_on_bus(int bus)
{
- int slot, func;
- unsigned int val;
- unsigned char hdr;
-
- for (slot = 0; slot < 0x20; slot++) {
- for (func = 0; func < 8; func++) {
- u32 reg32;
- device_t dev = PCI_DEV(bus, slot, func);
-
- val = pci_read_config32(dev, PCI_VENDOR_ID);
-
- if (val == 0xffffffff || val == 0x00000000 ||
- val == 0x0000ffff || val == 0xffff0000)
- continue;
-
- /* Disable Bus Mastering for this one device */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 &= ~PCI_COMMAND_MASTER;
- pci_write_config32(dev, PCI_COMMAND, reg32);
-
- /* If this is a bridge, then follow it. */
- hdr = pci_read_config8(dev, PCI_HEADER_TYPE);
- hdr &= 0x7f;
- if (hdr == PCI_HEADER_TYPE_BRIDGE ||
- hdr == PCI_HEADER_TYPE_CARDBUS) {
- unsigned int buses;
- buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
- busmaster_disable_on_bus((buses >> 8) & 0xff);
- }
- }
- }
+ int slot, func;
+ unsigned int val;
+ unsigned char hdr;
+
+ for (slot = 0; slot < 0x20; slot++) {
+ for (func = 0; func < 8; func++) {
+ u32 reg32;
+ device_t dev = PCI_DEV(bus, slot, func);
+
+ val = pci_read_config32(dev, PCI_VENDOR_ID);
+
+ if (val == 0xffffffff || val == 0x00000000 ||
+ val == 0x0000ffff || val == 0xffff0000)
+ continue;
+
+ /* Disable Bus Mastering for this one device */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 &= ~PCI_COMMAND_MASTER;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ /* If this is a bridge, then follow it. */
+ hdr = pci_read_config8(dev, PCI_HEADER_TYPE);
+ hdr &= 0x7f;
+ if (hdr == PCI_HEADER_TYPE_BRIDGE ||
+ hdr == PCI_HEADER_TYPE_CARDBUS) {
+ unsigned int buses;
+ buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
+ busmaster_disable_on_bus((buses >> 8) & 0xff);
+ }
+ }
+ }
}
-/*
- * Turn off the backlight if it is on, and wait for the specified
- * backlight off delay. This will allow panel power timings to meet
- * spec and prevent brief garbage on the screen when turned off
- * during firmware with power button triggered SMI.
- */
-static void backlight_off(void)
-{
- void *reg_base;
- uint32_t pp_ctrl;
- uint32_t bl_off_delay;
-
- reg_base = (void *)((uintptr_t)pci_read_config32(SA_DEV_IGD, PCI_BASE_ADDRESS_0) & ~0xf);
-
- /* Check if backlight is enabled */
- pp_ctrl = read32(reg_base + PCH_PP_CONTROL);
- if (!(pp_ctrl & EDP_BLC_ENABLE))
- return;
-
- /* Enable writes to this register */
- pp_ctrl &= ~PANEL_UNLOCK_MASK;
- pp_ctrl |= PANEL_UNLOCK_REGS;
-
- /* Turn off backlight */
- pp_ctrl &= ~EDP_BLC_ENABLE;
-
- write32(reg_base + PCH_PP_CONTROL, pp_ctrl);
- read32(reg_base + PCH_PP_CONTROL);
-
- /* Read backlight off delay in 100us units */
- bl_off_delay = read32(reg_base + PCH_PP_OFF_DELAYS);
- bl_off_delay &= PANEL_LIGHT_OFF_DELAY_MASK;
- bl_off_delay *= 100;
-
- /* Wait for backlight to turn off */
- udelay(bl_off_delay);
-
- printk(BIOS_INFO, "Backlight turned off\n");
-}
static void southbridge_smi_sleep(void)
{
@@ -176,21 +138,15 @@ static void southbridge_smi_sleep(void)
/* Do any mainboard sleep handling */
mainboard_smi_sleep(slp_typ-2);
- /* USB sleep preparations */
- usb_xhci_sleep_prepare(PCH_DEV_XHCI, slp_typ);
-
-#if CONFIG_ELOG_GSMI
- /* Log S3, S4, and S5 entry */
- if (slp_typ >= 5)
- elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ-2);
-#endif
+ if (IS_ENABLED(CONFIG_ELOG_GSMI))
+ /* Log S3, S4, and S5 entry */
+ if (slp_typ >= 5)
+ elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ-2);
/* Clear pending GPE events */
clear_gpe_status();
- /* Next, do the deed.
- */
-
+ /* Next, do the deed. */
switch (slp_typ) {
case SLP_TYP_S0:
printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n");
@@ -204,27 +160,23 @@ static void southbridge_smi_sleep(void)
/* Invalidate the cache before going to S3 */
wbinvd();
break;
- case SLP_TYP_S4:
- printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n");
- break;
case SLP_TYP_S5:
printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n");
-
- /* Turn off backlight if needed */
- backlight_off();
-
+ /*TODO: cmos_layout.bin need to verify; cause wrong CMOS setup*/
+ s5pwr = MAINBOARD_POWER_ON;
/* Disable all GPE */
disable_all_gpe();
- /* Always set the flag in case CMOS was changed on runtime. For
+ /*
+ * Always set the flag in case CMOS was changed on runtime. For
* "KEEP", switch to "OFF" - KEEP is software emulated
*/
- reg8 = pci_read_config8(PCH_DEV_LPC, GEN_PMCON_3);
+ reg8 = pci_read_config8(PCH_DEV_PMC, GEN_PMCON_B);
if (s5pwr == MAINBOARD_POWER_ON)
reg8 &= ~1;
else
reg8 |= 1;
- pci_write_config8(PCH_DEV_LPC, GEN_PMCON_3, reg8);
+ pci_write_config8(PCH_DEV_PMC, GEN_PMCON_B, reg8);
/* also iterates over all bridges on bus 0 */
busmaster_disable_on_bus(0);
@@ -243,7 +195,7 @@ static void southbridge_smi_sleep(void)
/* Make sure to stop executing code here for S3/S4/S5 */
if (slp_typ > 1)
- halt();
+ hlt();
/*
* In most sleep states, the code flow of this function ends at
@@ -293,9 +245,9 @@ static em64t101_smm_state_save_area_t *smi_apmc_find_state_save(u8 cmd)
return NULL;
}
-#if CONFIG_ELOG_GSMI
static void southbridge_smi_gsmi(void)
{
+#if IS_ENABLED(CONFIG_ELOG_GSMI)
u32 *ret, *param;
u8 sub_command;
em64t101_smm_state_save_area_t *io_smi =
@@ -305,16 +257,16 @@ static void southbridge_smi_gsmi(void)
return;
/* Command and return value in EAX */
- ret = (u32*)&io_smi->rax;
+ ret = (u32 *)&io_smi->rax;
sub_command = (u8)(*ret >> 8);
/* Parameter buffer in EBX */
- param = (u32*)&io_smi->rbx;
+ param = (u32 *)&io_smi->rbx;
/* drivers/elog/gsmi.c */
*ret = gsmi_exec(sub_command, param);
-}
#endif
+}
static void finalize(void)
{
@@ -326,10 +278,9 @@ static void finalize(void)
}
finalize_done = 1;
-#if CONFIG_SPI_FLASH_SMM
- /* Re-init SPI driver to handle locked BAR */
- spi_init();
-#endif
+ if (IS_ENABLED(CONFIG_SPI_FLASH_SMM))
+ /* Re-init SPI driver to handle locked BAR */
+ spi_init();
}
static void southbridge_smi_apmc(void)
@@ -341,9 +292,6 @@ static void southbridge_smi_apmc(void)
reg8 = inb(APM_CNT);
switch (reg8) {
- case APM_CNT_CST_CONTROL:
- printk(BIOS_DEBUG, "C-state control\n");
- break;
case APM_CNT_PST_CONTROL:
printk(BIOS_DEBUG, "P-state control\n");
break;
@@ -372,11 +320,10 @@ static void southbridge_smi_apmc(void)
printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs);
}
break;
-#if CONFIG_ELOG_GSMI
case ELOG_GSMI_APM_CNT:
- southbridge_smi_gsmi();
+ if (IS_ENABLED(CONFIG_ELOG_GSMI))
+ southbridge_smi_gsmi();
break;
-#endif
}
mainboard_smi_apmc(reg8);
@@ -386,14 +333,14 @@ static void southbridge_smi_pm1(void)
{
u16 pm1_sts = clear_pm1_status();
- /* While OSPM is not active, poweroff immediately
- * on a power button event.
+ /*
+ * While OSPM is not active, poweroff immediately on a power button
+ * event.
*/
if (pm1_sts & PWRBTN_STS) {
/* power button pressed */
-#if CONFIG_ELOG_GSMI
- elog_add_event(ELOG_TYPE_POWER_BUTTON);
-#endif
+ if (IS_ENABLED(CONFIG_ELOG_GSMI))
+ elog_add_event(ELOG_TYPE_POWER_BUTTON);
disable_pm1_control(-1UL);
enable_pm1_control(SLP_EN | (SLP_TYP_S5 << 10));
}
@@ -431,8 +378,8 @@ static void southbridge_smi_tco(void)
if (!tco_sts)
return;
- if (tco_sts & (1 << 8)) { // BIOSWR
- u8 bios_cntl = pci_read_config16(PCH_DEV_LPC, BIOS_CNTL);
+ if (tco_sts & (1 << 8)) { /* BIOSWR */
+ u8 bios_cntl = pci_read_config16(PCH_DEV_SPI, BIOS_CNTL);
if (bios_cntl & 1) {
/*
@@ -446,7 +393,7 @@ static void southbridge_smi_tco(void)
* box.
*/
printk(BIOS_DEBUG, "Switching back to RO\n");
- pci_write_config32(PCH_DEV_LPC, BIOS_CNTL,
+ pci_write_config32(PCH_DEV_SPI, BIOS_CNTL,
(bios_cntl & ~1));
} /* No else for now? */
} else if (tco_sts & (1 << 3)) { /* TIMEOUT */
@@ -472,12 +419,14 @@ static void southbridge_smi_monitor(void)
u32 trap_sts, trap_cycle;
u32 data, mask = 0;
int i;
-
- trap_sts = RCBA32(0x1e00); // TRSR - Trap Status Register
- RCBA32(0x1e00) = trap_sts; // Clear trap(s) in TRSR
-
- trap_cycle = RCBA32(0x1e10);
- for (i=16; i<20; i++) {
+ /* TRSR - Trap Status Register */
+ pcr_read32(PID_PSTH, R_PCH_PCR_PSTH_TRPST, &trap_sts);
+ /* Clear trap(s) in TRSR */
+ pcr_write8(PID_PSTH, R_PCH_PCR_PSTH_TRPST, trap_sts);
+
+ /* TRPC - Trapped cycle */
+ pcr_read32(PID_PSTH, R_PCH_PCR_PSTH_TRPC, &trap_cycle);
+ for (i = 16; i < 20; i++) {
if (trap_cycle & (1 << i))
mask |= (0xff << ((i - 16) << 2));
}
@@ -486,30 +435,30 @@ static void southbridge_smi_monitor(void)
/* IOTRAP(3) SMI function call */
if (IOTRAP(3)) {
if (gnvs && gnvs->smif)
- io_trap_handler(gnvs->smif); // call function smif
+ io_trap_handler(gnvs->smif); /* call function smif */
return;
}
- /* IOTRAP(2) currently unused
- * IOTRAP(1) currently unused */
+ /*
+ * IOTRAP(2) currently unused
+ * IOTRAP(1) currently unused
+ */
/* IOTRAP(0) SMIC */
if (IOTRAP(0)) {
- if (!(trap_cycle & (1 << 24))) { // It's a write
+ if (!(trap_cycle & (1 << 24))) { /* It's a write */
printk(BIOS_DEBUG, "SMI1 command\n");
- data = RCBA32(0x1e18);
+ /* Trapped write data */
+ pcr_read32(PID_PSTH, R_PCH_PCR_PSTH_TRPD, &data);
data &= mask;
- // if (smi1)
- // southbridge_smi_command(data);
- // return;
}
- // Fall through to debug
}
printk(BIOS_DEBUG, " trapped io address = 0x%x\n",
trap_cycle & 0xfffc);
- for (i=0; i < 4; i++)
- if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i);
+ for (i = 0; i < 4; i++)
+ if (IOTRAP(i))
+ printk(BIOS_DEBUG, " TRAP = %d\n", i);
printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf);
printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask);
printk(BIOS_DEBUG, " read/write: %s\n",
@@ -517,7 +466,7 @@ static void southbridge_smi_monitor(void)
if (!(trap_cycle & (1 << 24))) {
/* Write Cycle */
- data = RCBA32(0x1e18);
+ pcr_read32(PID_PSTH, R_PCH_PCR_PSTH_TRPD, &data);
printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data);
}
#undef IOTRAP
@@ -526,52 +475,50 @@ static void southbridge_smi_monitor(void)
typedef void (*smi_handler_t)(void);
static smi_handler_t southbridge_smi[32] = {
- NULL, // [0] reserved
- NULL, // [1] reserved
- NULL, // [2] BIOS_STS
- NULL, // [3] LEGACY_USB_STS
- southbridge_smi_sleep, // [4] SLP_SMI_STS
- southbridge_smi_apmc, // [5] APM_STS
- NULL, // [6] SWSMI_TMR_STS
- NULL, // [7] reserved
- southbridge_smi_pm1, // [8] PM1_STS
- southbridge_smi_gpe0, // [9] GPE0_STS
- southbridge_smi_gpi, // [10] GPI_STS
- southbridge_smi_mc, // [11] MCSMI_STS
- NULL, // [12] DEVMON_STS
- southbridge_smi_tco, // [13] TCO_STS
- southbridge_smi_periodic, // [14] PERIODIC_STS
- NULL, // [15] SERIRQ_SMI_STS
- NULL, // [16] SMBUS_SMI_STS
- NULL, // [17] LEGACY_USB2_STS
- NULL, // [18] INTEL_USB2_STS
- NULL, // [19] reserved
- NULL, // [20] PCI_EXP_SMI_STS
- southbridge_smi_monitor, // [21] MONITOR_STS
- NULL, // [22] reserved
- NULL, // [23] reserved
- NULL, // [24] reserved
- NULL, // [25] EL_SMI_STS
- NULL, // [26] SPI_STS
- NULL, // [27] reserved
- NULL, // [28] reserved
- NULL, // [29] reserved
- NULL, // [30] reserved
- NULL // [31] reserved
+ NULL, /* [0] reserved */
+ NULL, /* [1] reserved */
+ NULL, /* [2] BIOS_STS */
+ NULL, /* [3] LEGACY_USB_STS */
+ southbridge_smi_sleep, /* [4] SLP_SMI_STS */
+ southbridge_smi_apmc, /* [5] APM_STS */
+ NULL, /* [6] SWSMI_TMR_STS */
+ NULL, /* [7] reserved */
+ southbridge_smi_pm1, /* [8] PM1_STS */
+ southbridge_smi_gpe0, /* [9] GPE0_STS */
+ southbridge_smi_gpi, /* [10] GPI_STS */
+ southbridge_smi_mc, /* [11] MCSMI_STS */
+ NULL, /* [12] DEVMON_STS */
+ southbridge_smi_tco, /* [13] TCO_STS */
+ southbridge_smi_periodic, /* [14] PERIODIC_STS */
+ NULL, /* [15] SERIRQ_SMI_STS */
+ NULL, /* [16] SMBUS_SMI_STS */
+ NULL, /* [17] LEGACY_USB2_STS */
+ NULL, /* [18] INTEL_USB2_STS */
+ NULL, /* [19] reserved */
+ NULL, /* [20] PCI_EXP_SMI_STS */
+ southbridge_smi_monitor, /* [21] MONITOR_STS */
+ NULL, /* [22] reserved */
+ NULL, /* [23] reserved */
+ NULL, /* [24] reserved */
+ NULL, /* [25] EL_SMI_STS */
+ NULL, /* [26] SPI_STS */
+ NULL, /* [27] reserved */
+ NULL, /* [28] reserved */
+ NULL, /* [29] reserved */
+ NULL, /* [30] reserved */
+ NULL /* [31] reserved */
};
-/**
- * @brief Interrupt handler for SMI#
- *
- * @param smm_revision revision of the smm state save map
+/*
+ * Interrupt handler for SMI#
*/
-
void southbridge_smi_handler(void)
{
int i;
u32 smi_sts;
- /* We need to clear the SMI status registers, or we won't see what's
+ /*
+ * We need to clear the SMI status registers, or we won't see what's
* happening in the following calls.
*/
smi_sts = clear_smi_status();
@@ -583,8 +530,8 @@ void southbridge_smi_handler(void)
southbridge_smi[i]();
} else {
printk(BIOS_DEBUG,
- "SMI_STS[%d] occurred, but no "
- "handler available.\n", i);
+ "SMI_STS[%d] occured, but no handler available.\n",
+ i);
}
}
}
diff --git a/src/soc/intel/skylake/smmrelocate.c b/src/soc/intel/skylake/smmrelocate.c
index 47d6385a63..874d95f10a 100644
--- a/src/soc/intel/skylake/smmrelocate.c
+++ b/src/soc/intel/skylake/smmrelocate.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <types.h>
@@ -34,6 +35,7 @@
#include <soc/pci_devs.h>
#include <soc/smm.h>
#include <soc/systemagent.h>
+#include "chip.h"
/* This gets filled in and used during relocation. */
static struct smm_relocation_params smm_reloc_params;
@@ -46,48 +48,44 @@ static inline void write_smrr(struct smm_relocation_params *relo_params)
wrmsr(SMRRphysMask_MSR, relo_params->smrr_mask);
}
-static inline void write_emrr(struct smm_relocation_params *relo_params)
-{
- printk(BIOS_DEBUG, "Writing EMRR. base = 0x%08x, mask=0x%08x\n",
- relo_params->emrr_base.lo, relo_params->emrr_mask.lo);
- wrmsr(EMRRphysBase_MSR, relo_params->emrr_base);
- wrmsr(EMRRphysMask_MSR, relo_params->emrr_mask);
-}
-
static inline void write_uncore_emrr(struct smm_relocation_params *relo_params)
{
printk(BIOS_DEBUG,
"Writing UNCORE_EMRR. base = 0x%08x, mask=0x%08x\n",
relo_params->uncore_emrr_base.lo,
relo_params->uncore_emrr_mask.lo);
- wrmsr(UNCORE_EMRRphysBase_MSR, relo_params->uncore_emrr_base);
- wrmsr(UNCORE_EMRRphysMask_MSR, relo_params->uncore_emrr_mask);
+ wrmsr(UNCORE_EMRR_PHYS_BASE_MSR, relo_params->uncore_emrr_base);
+ wrmsr(UNCORE_EMRR_PHYS_MASK_MSR, relo_params->uncore_emrr_mask);
}
static void update_save_state(int cpu,
- struct smm_relocation_params *relo_params,
- const struct smm_runtime *runtime)
+ struct smm_relocation_params *relo_params,
+ const struct smm_runtime *runtime)
{
u32 smbase;
u32 iedbase;
- /* The relocated handler runs with all CPUs concurrently. Therefore
+ /*
+ * The relocated handler runs with all CPUs concurrently. Therefore
* stagger the entry points adjusting SMBASE downwards by save state
- * size * CPU num. */
+ * size * CPU num.
+ */
smbase = relo_params->smram_base - cpu * runtime->save_state_size;
iedbase = relo_params->ied_base;
printk(BIOS_DEBUG, "New SMBASE=0x%08x IEDBASE=0x%08x\n",
smbase, iedbase);
- /* All threads need to set IEDBASE and SMBASE to the relocated
+ /*
+ * All threads need to set IEDBASE and SMBASE to the relocated
* handler region. However, the save state location depends on the
* smm_save_state_in_msrs field in the relocation parameters. If
* smm_save_state_in_msrs is non-zero then the CPUs are relocating
* the SMM handler in parallel, and each CPUs save state area is
* located in their respective MSR space. If smm_save_state_in_msrs
* is zero then the SMM relocation is happening serially so the
- * save state is at the same default location for all CPUs. */
+ * save state is at the same default location for all CPUs.
+ */
if (relo_params->smm_save_state_in_msrs) {
msr_t smbase_msr;
msr_t iedbase_msr;
@@ -95,8 +93,10 @@ static void update_save_state(int cpu,
smbase_msr.lo = smbase;
smbase_msr.hi = 0;
- /* According the BWG the IEDBASE MSR is in bits 63:32. It's
- * not clear why it differs from the SMBASE MSR. */
+ /*
+ * According the BWG the IEDBASE MSR is in bits 63:32. It's
+ * not clear why it differs from the SMBASE MSR.
+ */
iedbase_msr.lo = 0;
iedbase_msr.hi = iedbase;
@@ -131,9 +131,11 @@ static int bsp_setup_msr_save_state(struct smm_relocation_params *relo_params)
return relo_params->smm_save_state_in_msrs;
}
-/* The relocation work is actually performed in SMM context, but the code
+/*
+ * The relocation work is actually performed in SMM context, but the code
* resides in the ramstage module. This occurs by trampolining from the default
- * SMRAM entry point to here. */
+ * SMRAM entry point to here.
+ */
static void asmlinkage cpu_smm_do_relocation(void *arg)
{
msr_t mtrr_cap;
@@ -155,16 +157,20 @@ static void asmlinkage cpu_smm_do_relocation(void *arg)
printk(BIOS_DEBUG, "In relocation handler: cpu %d\n", cpu);
- /* Determine if the processor supports saving state in MSRs. If so,
+ /*
+ * Determine if the processor supports saving state in MSRs. If so,
* enable it before the non-BSPs run so that SMM relocation can occur
- * in parallel in the non-BSP CPUs. */
+ * in parallel in the non-BSP CPUs.
+ */
if (cpu == 0) {
- /* If smm_save_state_in_msrs is 1 then that means this is the
+ /*
+ * If smm_save_state_in_msrs is 1 then that means this is the
* 2nd time through the relocation handler for the BSP.
* Parallel SMM handler relocation is taking place. However,
* it is desired to access other CPUs save state in the real
* SMM handler. Therefore, disable the SMM save state in MSRs
- * feature. */
+ * feature.
+ */
if (relo_params->smm_save_state_in_msrs) {
msr_t smm_feature_control;
@@ -172,10 +178,12 @@ static void asmlinkage cpu_smm_do_relocation(void *arg)
smm_feature_control.lo &= ~SMM_CPU_SAVE_EN;
wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control);
} else if (bsp_setup_msr_save_state(relo_params))
- /* Just return from relocation handler if MSR save
+ /*
+ * Just return from relocation handler if MSR save
* state is enabled. In that case the BSP will come
* back into the relocation handler to setup the new
- * SMBASE as well disabling SMM save state in MSRs. */
+ * SMBASE as well disabling SMM save state in MSRs.
+ */
return;
}
@@ -186,14 +194,6 @@ static void asmlinkage cpu_smm_do_relocation(void *arg)
mtrr_cap = rdmsr(MTRRcap_MSR);
if (mtrr_cap.lo & SMRR_SUPPORTED)
write_smrr(relo_params);
-
- if (mtrr_cap.lo & EMRR_SUPPORTED) {
- write_emrr(relo_params);
- /* UNCORE_EMRR msrs are package level. Therefore, only
- * configure these MSRs on the BSP. */
- if (cpu == 0)
- write_uncore_emrr(relo_params);
- }
}
static u32 northbridge_get_base_reg(device_t dev, int reg)
@@ -207,7 +207,7 @@ static u32 northbridge_get_base_reg(device_t dev, int reg)
}
static void fill_in_relocation_params(device_t dev,
- struct smm_relocation_params *params)
+ struct smm_relocation_params *params)
{
u32 tseg_size;
u32 tsegmb;
@@ -217,23 +217,26 @@ static void fill_in_relocation_params(device_t dev,
int phys_bits;
/* All range registers are aligned to 4KiB */
const u32 rmask = ~((1 << 12) - 1);
+ config_t *conf = dev->chip_info;
- /* Some of the range registers are dependent on the number of physical
- * address bits supported. */
+ /*
+ * Some of the range registers are dependent on the number of physical
+ * address bits supported.
+ */
phys_bits = cpuid_eax(0x80000008) & 0xff;
- /* The range bounded by the TSEGMB and BGSM registers encompasses the
- * SMRAM range as well as the IED range. However, the SMRAM available
- * to the handler is 4MiB since the IEDRAM lives TSEGMB + 4MiB.
+ /*
+ * The range bounded by the TSEGMB and BGSM registers encompasses the
+ * SMRAM range as well as the IED range.
*/
tsegmb = northbridge_get_base_reg(dev, TSEG);
bgsm = northbridge_get_base_reg(dev, BGSM);
tseg_size = bgsm - tsegmb;
+ params->ied_size = conf->IedSize;
+ params->smram_size = tseg_size - params->ied_size;
params->smram_base = tsegmb;
- params->smram_size = 4 << 20;
params->ied_base = tsegmb + params->smram_size;
- params->ied_size = tseg_size - params->smram_size;
/* Adjust available SMM handler memory size. */
params->smram_size -= CONFIG_SMM_RESERVED_SIZE;
@@ -248,8 +251,10 @@ static void fill_in_relocation_params(device_t dev,
emrr_base = (params->ied_base + (2 << 20)) & rmask;
emrr_size = params->ied_size - (2 << 20);
- /* EMRR has 46 bits of valid address aligned to 4KiB. It's dependent
- * on the number of physical address bits supported. */
+ /*
+ * EMRR has 46 bits of valid address aligned to 4KiB. It's dependent
+ * on the number of physical address bits supported.
+ */
params->emrr_base.lo = emrr_base | MTRR_TYPE_WRBACK;
params->emrr_base.hi = 0;
params->emrr_mask.lo = (~(emrr_size - 1) & rmask) | MTRRphysMaskValid;
@@ -259,7 +264,7 @@ static void fill_in_relocation_params(device_t dev,
params->uncore_emrr_base.lo = emrr_base;
params->uncore_emrr_base.hi = 0;
params->uncore_emrr_mask.lo = (~(emrr_size - 1) & rmask) |
- MTRRphysMaskValid;
+ MTRRphysMaskValid;
params->uncore_emrr_mask.hi = (1 << (39 - 32)) - 1;
}
@@ -280,14 +285,16 @@ static void adjust_apic_id_map(struct smm_loader_params *smm_params)
}
static int install_relocation_handler(int num_cpus,
- struct smm_relocation_params *relo_params)
+ struct smm_relocation_params *relo_params)
{
- /* The default SMM entry can happen in parallel or serially. If the
+ /*
+ * The default SMM entry can happen in parallel or serially. If the
* default SMM entry is done in parallel the BSP has already setup
* the saving state to each CPU's MSRs. At least one save state size
* is required for the initial SMM entry for the BSP to determine if
* parallel SMM relocation is even feasible. Set the stack size to
- * the save state size, and call into the do_relocation handler. */
+ * the save state size, and call into the do_relocation handler.
+ */
int save_state_size = sizeof(em64t101_smm_state_save_area_t);
struct smm_loader_params smm_params = {
.per_cpu_stack_size = save_state_size,
@@ -318,6 +325,9 @@ static void setup_ied_area(struct smm_relocation_params *params)
ied_base = (void *)params->ied_base;
+ printk(BIOS_DEBUG, "IED base = 0x%08x\n", params->ied_base);
+ printk(BIOS_DEBUG, "IED size = 0x%08x\n", params->ied_size);
+
/* Place IED header at IEDBASE. */
memcpy(ied_base, &ied, sizeof(ied));
@@ -326,10 +336,12 @@ static void setup_ied_area(struct smm_relocation_params *params)
}
static int install_permanent_handler(int num_cpus,
- struct smm_relocation_params *relo_params)
+ struct smm_relocation_params *relo_params)
{
- /* There are num_cpus concurrent stacks and num_cpus concurrent save
- * state areas. Lastly, set the stack size to the save state size. */
+ /*
+ * There are num_cpus concurrent stacks and num_cpus concurrent save
+ * state areas. Lastly, set the stack size to the save state size.
+ */
int save_state_size = sizeof(em64t101_smm_state_save_area_t);
struct smm_loader_params smm_params = {
.per_cpu_stack_size = save_state_size,
@@ -341,7 +353,7 @@ static int install_permanent_handler(int num_cpus,
printk(BIOS_DEBUG, "Installing SMM handler to 0x%08x\n",
relo_params->smram_base);
if (smm_load_module((void *)relo_params->smram_base,
- relo_params->smram_size, &smm_params))
+ relo_params->smram_size, &smm_params))
return -1;
adjust_apic_id_map(&smm_params);
@@ -359,14 +371,15 @@ static int cpu_smm_setup(void)
fill_in_relocation_params(dev, &smm_reloc_params);
- setup_ied_area(&smm_reloc_params);
+ if (smm_reloc_params.ied_size)
+ setup_ied_area(&smm_reloc_params);
msr = rdmsr(CORE_THREAD_COUNT_MSR);
num_cpus = msr.lo & 0xffff;
if (num_cpus > CONFIG_MAX_CPUS) {
printk(BIOS_CRIT,
- "Error: Hardware CPUs (%d) > MAX_CPUS (%d)\n",
- num_cpus, CONFIG_MAX_CPUS);
+ "Error: Hardware CPUs (%d) > MAX_CPUS (%d)\n",
+ num_cpus, CONFIG_MAX_CPUS);
}
if (install_relocation_handler(num_cpus, &smm_reloc_params)) {
@@ -380,7 +393,6 @@ static int cpu_smm_setup(void)
}
/* Ensure the SMM handlers hit DRAM before performing first SMI. */
- /* TODO(adurbin): Is this really needed? */
wbinvd();
return 0;
@@ -398,9 +410,8 @@ int smm_initialize(void)
/* Run the relocation handler. */
smm_initiate_relocation();
- if (smm_reloc_params.smm_save_state_in_msrs) {
+ if (smm_reloc_params.smm_save_state_in_msrs)
printk(BIOS_DEBUG, "Doing parallel SMM relocation.\n");
- }
return 0;
}
@@ -421,16 +432,19 @@ void smm_relocate(void)
void smm_init(void)
{
- /* smm_init() is normally called from initialize_cpus() in
+ /*
+ * smm_init() is normally called from initialize_cpus() in
* lapic_cpu_init.c. However, that path is no longer used. Don't reuse
* the function name because that would cause confusion.
* The smm_initialize() function above is used to setup SMM at the
- * appropriate time. */
+ * appropriate time.
+ */
}
void smm_lock(void)
{
- /* LOCK the SMM memory window and enable normal SMM.
+ /*
+ * LOCK the SMM memory window and enable normal SMM.
* After running this function, only a full reset can
* make the SMM registers writable again.
*/
diff --git a/src/soc/intel/skylake/spi.c b/src/soc/intel/skylake/spi.c
deleted file mode 100644
index 36558a1db9..0000000000
--- a/src/soc/intel/skylake/spi.c
+++ /dev/null
@@ -1,680 +0,0 @@
-/*
- * Copyright (C) 2014 Google Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* This file is derived from the flashrom project. */
-#include <stdint.h>
-#include <stdlib.h>
-#include <string.h>
-#include <bootstate.h>
-#include <delay.h>
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/pci_ids.h>
-#include <spi-generic.h>
-#include <soc/pci_devs.h>
-#include <soc/rcba.h>
-#include <soc/spi.h>
-
-#ifdef __SMM__
-#define pci_read_config_byte(dev, reg, targ)\
- *(targ) = pci_read_config8(dev, reg)
-#define pci_read_config_word(dev, reg, targ)\
- *(targ) = pci_read_config16(dev, reg)
-#define pci_read_config_dword(dev, reg, targ)\
- *(targ) = pci_read_config32(dev, reg)
-#define pci_write_config_byte(dev, reg, val)\
- pci_write_config8(dev, reg, val)
-#define pci_write_config_word(dev, reg, val)\
- pci_write_config16(dev, reg, val)
-#define pci_write_config_dword(dev, reg, val)\
- pci_write_config32(dev, reg, val)
-#else /* !__SMM__ */
-#include <device/device.h>
-#include <device/pci.h>
-#define pci_read_config_byte(dev, reg, targ)\
- *(targ) = pci_read_config8(dev, reg)
-#define pci_read_config_word(dev, reg, targ)\
- *(targ) = pci_read_config16(dev, reg)
-#define pci_read_config_dword(dev, reg, targ)\
- *(targ) = pci_read_config32(dev, reg)
-#define pci_write_config_byte(dev, reg, val)\
- pci_write_config8(dev, reg, val)
-#define pci_write_config_word(dev, reg, val)\
- pci_write_config16(dev, reg, val)
-#define pci_write_config_dword(dev, reg, val)\
- pci_write_config32(dev, reg, val)
-#endif /* !__SMM__ */
-
-typedef struct spi_slave ich_spi_slave;
-
-static int ichspi_lock = 0;
-
-typedef struct ich9_spi_regs {
- uint32_t bfpr;
- uint16_t hsfs;
- uint16_t hsfc;
- uint32_t faddr;
- uint32_t _reserved0;
- uint32_t fdata[16];
- uint32_t frap;
- uint32_t freg[5];
- uint32_t _reserved1[3];
- uint32_t pr[5];
- uint32_t _reserved2[2];
- uint8_t ssfs;
- uint8_t ssfc[3];
- uint16_t preop;
- uint16_t optype;
- uint8_t opmenu[8];
- uint32_t bbar;
- uint8_t _reserved3[12];
- uint32_t fdoc;
- uint32_t fdod;
- uint8_t _reserved4[8];
- uint32_t afc;
- uint32_t lvscc;
- uint32_t uvscc;
- uint8_t _reserved5[4];
- uint32_t fpb;
- uint8_t _reserved6[28];
- uint32_t srdl;
- uint32_t srdc;
- uint32_t srd;
-} __attribute__((packed)) ich9_spi_regs;
-
-typedef struct ich_spi_controller {
- int locked;
-
- uint8_t *opmenu;
- int menubytes;
- uint16_t *preop;
- uint16_t *optype;
- uint32_t *addr;
- uint8_t *data;
- unsigned databytes;
- uint8_t *status;
- uint16_t *control;
- uint32_t *bbar;
-} ich_spi_controller;
-
-static ich_spi_controller cntlr;
-
-enum {
- SPIS_SCIP = 0x0001,
- SPIS_GRANT = 0x0002,
- SPIS_CDS = 0x0004,
- SPIS_FCERR = 0x0008,
- SSFS_AEL = 0x0010,
- SPIS_LOCK = 0x8000,
- SPIS_RESERVED_MASK = 0x7ff0,
- SSFS_RESERVED_MASK = 0x7fe2
-};
-
-enum {
- SPIC_SCGO = 0x000002,
- SPIC_ACS = 0x000004,
- SPIC_SPOP = 0x000008,
- SPIC_DBC = 0x003f00,
- SPIC_DS = 0x004000,
- SPIC_SME = 0x008000,
- SSFC_SCF_MASK = 0x070000,
- SSFC_RESERVED = 0xf80000
-};
-
-enum {
- HSFS_FDONE = 0x0001,
- HSFS_FCERR = 0x0002,
- HSFS_AEL = 0x0004,
- HSFS_BERASE_MASK = 0x0018,
- HSFS_BERASE_SHIFT = 3,
- HSFS_SCIP = 0x0020,
- HSFS_FDOPSS = 0x2000,
- HSFS_FDV = 0x4000,
- HSFS_FLOCKDN = 0x8000
-};
-
-enum {
- HSFC_FGO = 0x0001,
- HSFC_FCYCLE_MASK = 0x0006,
- HSFC_FCYCLE_SHIFT = 1,
- HSFC_FDBC_MASK = 0x3f00,
- HSFC_FDBC_SHIFT = 8,
- HSFC_FSMIE = 0x8000
-};
-
-enum {
- SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0,
- SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1,
- SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2,
- SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3
-};
-
-#if CONFIG_DEBUG_SPI_FLASH
-
-static u8 readb_(const void *addr)
-{
- u8 v = read8(addr);
- printk(BIOS_DEBUG, "read %2.2x from %4.4x\n",
- v, ((unsigned) addr & 0xffff) - 0xf020);
- return v;
-}
-
-static u16 readw_(const void *addr)
-{
- u16 v = read16(addr);
- printk(BIOS_DEBUG, "read %4.4x from %4.4x\n",
- v, ((unsigned) addr & 0xffff) - 0xf020);
- return v;
-}
-
-static u32 readl_(const void *addr)
-{
- u32 v = read32(addr);
- printk(BIOS_DEBUG, "read %8.8x from %4.4x\n",
- v, ((unsigned) addr & 0xffff) - 0xf020);
- return v;
-}
-
-static void writeb_(u8 b, const void *addr)
-{
- write8(addr, b);
- printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n",
- b, ((unsigned) addr & 0xffff) - 0xf020);
-}
-
-static void writew_(u16 b, const void *addr)
-{
- write16(addr, b);
- printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n",
- b, ((unsigned) addr & 0xffff) - 0xf020);
-}
-
-static void writel_(u32 b, const void *addr)
-{
- write32(addr, b);
- printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n",
- b, ((unsigned) addr & 0xffff) - 0xf020);
-}
-
-#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */
-
-#define readb_(a) read8(a)
-#define readw_(a) read16(a)
-#define readl_(a) read32(a)
-#define writeb_(val, addr) write8(addr, val)
-#define writew_(val, addr) write16(addr, val)
-#define writel_(val, addr) write32(addr, val)
-
-#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */
-
-static void write_reg(const void *value, void *dest, uint32_t size)
-{
- const uint8_t *bvalue = value;
- uint8_t *bdest = dest;
-
- while (size >= 4) {
- writel_(*(const uint32_t *)bvalue, bdest);
- bdest += 4; bvalue += 4; size -= 4;
- }
- while (size) {
- writeb_(*bvalue, bdest);
- bdest++; bvalue++; size--;
- }
-}
-
-static void read_reg(const void *src, void *value, uint32_t size)
-{
- const uint8_t *bsrc = src;
- uint8_t *bvalue = value;
-
- while (size >= 4) {
- *(uint32_t *)bvalue = readl_(bsrc);
- bsrc += 4; bvalue += 4; size -= 4;
- }
- while (size) {
- *bvalue = readb_(bsrc);
- bsrc++; bvalue++; size--;
- }
-}
-
-static void ich_set_bbar(uint32_t minaddr)
-{
- const uint32_t bbar_mask = 0x00ffff00;
- uint32_t ichspi_bbar;
-
- minaddr &= bbar_mask;
- ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask;
- ichspi_bbar |= minaddr;
- writel_(ichspi_bbar, cntlr.bbar);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs)
-{
- ich_spi_slave *slave = malloc(sizeof(*slave));
-
- if (!slave) {
- printk(BIOS_DEBUG, "ICH SPI: Bad allocation\n");
- return NULL;
- }
-
- memset(slave, 0, sizeof(*slave));
-
- slave->bus = bus;
- slave->cs = cs;
- return slave;
-}
-
-void spi_init(void)
-{
- uint8_t *rcrb; /* Root Complex Register Block */
- uint32_t rcba; /* Root Complex Base Address */
- uint8_t bios_cntl;
- device_t dev = PCH_DEV_LPC;
- ich9_spi_regs *ich9_spi;
-
- pci_read_config_dword(dev, 0xf0, &rcba);
- /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */
- rcrb = (uint8_t *)(rcba & 0xffffc000);
- ich9_spi = (ich9_spi_regs *)(rcrb + 0x3800);
- ichspi_lock = readw_(&ich9_spi->hsfs) & HSFS_FLOCKDN;
- cntlr.opmenu = ich9_spi->opmenu;
- cntlr.menubytes = sizeof(ich9_spi->opmenu);
- cntlr.optype = &ich9_spi->optype;
- cntlr.addr = &ich9_spi->faddr;
- cntlr.data = (uint8_t *)ich9_spi->fdata;
- cntlr.databytes = sizeof(ich9_spi->fdata);
- cntlr.status = &ich9_spi->ssfs;
- cntlr.control = (uint16_t *)ich9_spi->ssfc;
- cntlr.bbar = &ich9_spi->bbar;
- cntlr.preop = &ich9_spi->preop;
- ich_set_bbar(0);
-
- /* Disable the BIOS write protect so write commands are allowed. */
- pci_read_config_byte(dev, 0xdc, &bios_cntl);
- bios_cntl &= ~(1 << 5);
- pci_write_config_byte(dev, 0xdc, bios_cntl | 0x1);
-}
-
-#if ENV_RAMSTAGE
-static void spi_init_cb(void *unused)
-{
- spi_init();
-}
-
-BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_ENTRY, spi_init_cb, NULL);
-#endif
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- /* Handled by ICH automatically. */
- return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
- /* Handled by ICH automatically. */
-}
-
-typedef struct spi_transaction {
- const uint8_t *out;
- uint32_t bytesout;
- uint8_t *in;
- uint32_t bytesin;
- uint8_t type;
- uint8_t opcode;
- uint32_t offset;
-} spi_transaction;
-
-static inline void spi_use_out(spi_transaction *trans, unsigned bytes)
-{
- trans->out += bytes;
- trans->bytesout -= bytes;
-}
-
-static inline void spi_use_in(spi_transaction *trans, unsigned bytes)
-{
- trans->in += bytes;
- trans->bytesin -= bytes;
-}
-
-static void spi_setup_type(spi_transaction *trans)
-{
- trans->type = 0xFF;
-
- /* Try to guess spi type from read/write sizes. */
- if (trans->bytesin == 0) {
- if (trans->bytesout > 4)
- /*
- * If bytesin = 0 and bytesout > 4, we presume this is
- * a write data operation, which is accompanied by an
- * address.
- */
- trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS;
- else
- trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS;
- return;
- }
-
- if (trans->bytesout == 1) { /* and bytesin is > 0 */
- trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS;
- return;
- }
-
- if (trans->bytesout == 4) { /* and bytesin is > 0 */
- trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
- }
-
- /* Fast read command is called with 5 bytes instead of 4 */
- if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) {
- trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
- --trans->bytesout;
- }
-}
-
-static int spi_setup_opcode(spi_transaction *trans)
-{
- uint16_t optypes;
- uint8_t opmenu[cntlr.menubytes];
-
- trans->opcode = trans->out[0];
- spi_use_out(trans, 1);
- if (!ichspi_lock) {
- /* The lock is off, so just use index 0. */
- writeb_(trans->opcode, cntlr.opmenu);
- optypes = readw_(cntlr.optype);
- optypes = (optypes & 0xfffc) | (trans->type & 0x3);
- writew_(optypes, cntlr.optype);
- return 0;
- } else {
- /* The lock is on. See if what we need is on the menu. */
- uint8_t optype;
- uint16_t opcode_index;
-
- /* Write Enable is handled as atomic prefix */
- if (trans->opcode == SPI_OPCODE_WREN)
- return 0;
-
- read_reg(cntlr.opmenu, opmenu, sizeof(opmenu));
- for (opcode_index = 0; opcode_index < cntlr.menubytes;
- opcode_index++) {
- if (opmenu[opcode_index] == trans->opcode)
- break;
- }
-
- if (opcode_index == cntlr.menubytes) {
- printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n",
- trans->opcode);
- return -1;
- }
-
- optypes = readw_(cntlr.optype);
- optype = (optypes >> (opcode_index * 2)) & 0x3;
- if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS &&
- optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS &&
- trans->bytesout >= 3) {
- /* We guessed wrong earlier. Fix it up. */
- trans->type = optype;
- }
- if (optype != trans->type) {
- printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n",
- optype);
- return -1;
- }
- return opcode_index;
- }
-}
-
-static int spi_setup_offset(spi_transaction *trans)
-{
- /* Separate the SPI address and data. */
- switch (trans->type) {
- case SPI_OPCODE_TYPE_READ_NO_ADDRESS:
- case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS:
- return 0;
- case SPI_OPCODE_TYPE_READ_WITH_ADDRESS:
- case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS:
- trans->offset = ((uint32_t)trans->out[0] << 16) |
- ((uint32_t)trans->out[1] << 8) |
- ((uint32_t)trans->out[2] << 0);
- spi_use_out(trans, 3);
- return 1;
- default:
- printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type);
- return -1;
- }
-}
-
-/*
- * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set
- * below is True) or 0. In case the wait was for the bit(s) to set - write
- * those bits back, which would cause resetting them.
- *
- * Return the last read status value on success or -1 on failure.
- */
-static int ich_status_poll(u16 bitmask, int wait_til_set)
-{
- int timeout = 6000; /* This will result in 60 ms */
- u16 status = 0;
-
- while (timeout--) {
- status = readw_(cntlr.status);
- if (wait_til_set ^ ((status & bitmask) == 0)) {
- if (wait_til_set)
- writew_((status & bitmask), cntlr.status);
- return status;
- }
- udelay(10);
- }
-
- printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n",
- status, bitmask);
- return -1;
-}
-
-unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len)
-{
- return min(cntlr.databytes, buf_len);
-}
-
-int spi_xfer(struct spi_slave *slave, const void *dout,
- unsigned int bytesout, void *din, unsigned int bytesin)
-{
- uint16_t control;
- int16_t opcode_index;
- int with_address;
- int status;
-
- spi_transaction trans = {
- dout, bytesout,
- din, bytesin,
- 0xff, 0xff, 0
- };
-
- /* There has to always at least be an opcode. */
- if (!bytesout || !dout) {
- printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n");
- return -1;
- }
- /* Make sure if we read something we have a place to put it. */
- if (bytesin != 0 && !din) {
- printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n");
- return -1;
- }
-
- if (ich_status_poll(SPIS_SCIP, 0) == -1)
- return -1;
-
- writew_(SPIS_CDS | SPIS_FCERR, cntlr.status);
-
- spi_setup_type(&trans);
- if ((opcode_index = spi_setup_opcode(&trans)) < 0)
- return -1;
- if ((with_address = spi_setup_offset(&trans)) < 0)
- return -1;
-
- if (trans.opcode == SPI_OPCODE_WREN) {
- /*
- * Treat Write Enable as Atomic Pre-Op if possible
- * in order to prevent the Management Engine from
- * issuing a transaction between WREN and DATA.
- */
- if (!ichspi_lock)
- writew_(trans.opcode, cntlr.preop);
- return 0;
- }
-
- /* Preset control fields */
- control = SPIC_SCGO | ((opcode_index & 0x07) << 4);
-
- /* Issue atomic preop cycle if needed */
- if (readw_(cntlr.preop))
- control |= SPIC_ACS;
-
- if (!trans.bytesout && !trans.bytesin) {
- /* SPI addresses are 24 bit only */
- if (with_address)
- writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
-
- /*
- * This is a 'no data' command (like Write Enable), its
- * bytesout size was 1, decremented to zero while executing
- * spi_setup_opcode() above. Tell the chip to send the
- * command.
- */
- writew_(control, cntlr.control);
-
- /* wait for the result */
- status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
- if (status == -1)
- return -1;
-
- if (status & SPIS_FCERR) {
- printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n");
- return -1;
- }
-
- return 0;
- }
-
- /*
- * Check if this is a write command attempting to transfer more bytes
- * than the controller can handle. Iterations for writes are not
- * supported here because each SPI write command needs to be preceded
- * and followed by other SPI commands, and this sequence is controlled
- * by the SPI chip driver.
- */
- if (trans.bytesout > cntlr.databytes) {
- printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use"
- " CONTROLLER_PAGE_LIMIT?\n");
- return -1;
- }
-
- /*
- * Read or write up to databytes bytes at a time until everything has
- * been sent.
- */
- while (trans.bytesout || trans.bytesin) {
- uint32_t data_length;
-
- /* SPI addresses are 24 bit only */
- /* http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/pentium-n3520-j2850-celeron-n2920-n2820-n2815-n2806-j1850-j1750-datasheet.pdf */
- writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
-
- if (trans.bytesout)
- data_length = min(trans.bytesout, cntlr.databytes);
- else
- data_length = min(trans.bytesin, cntlr.databytes);
-
- /* Program data into FDATA0 to N */
- if (trans.bytesout) {
- write_reg(trans.out, cntlr.data, data_length);
- spi_use_out(&trans, data_length);
- if (with_address)
- trans.offset += data_length;
- }
-
- /* Add proper control fields' values */
- control &= ~((cntlr.databytes - 1) << 8);
- control |= SPIC_DS;
- control |= (data_length - 1) << 8;
-
- /* write it */
- writew_(control, cntlr.control);
-
- /* Wait for Cycle Done Status or Flash Cycle Error. */
- status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
- if (status == -1)
- return -1;
-
- if (status & SPIS_FCERR) {
- printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n");
- return -1;
- }
-
- if (trans.bytesin) {
- read_reg(cntlr.data, trans.in, data_length);
- spi_use_in(&trans, data_length);
- if (with_address)
- trans.offset += data_length;
- }
- }
-
- /* Clear atomic preop now that xfer is done */
- writew_(0, cntlr.preop);
-
- return 0;
-}
-
-/* Use first empty Protected Range Register to cover region of flash */
-int spi_flash_protect(u32 start, u32 size)
-{
- u32 end = start + size - 1;
- u32 reg;
- int prr;
-
- /* Find first empty PRR */
- for (prr = 0; prr < SPI_PRR_MAX; prr++) {
- reg = SPIBAR32(SPI_PRR(prr));
- if (reg == 0)
- break;
- }
- if (prr >= SPI_PRR_MAX) {
- printk(BIOS_ERR, "ERROR: No SPI PRR free!\n");
- return -1;
- }
-
- /* Set protected range base and limit */
- reg = ((end >> SPI_PRR_SHIFT) & SPI_PRR_MASK);
- reg <<= SPI_PRR_LIMIT_SHIFT;
- reg |= ((start >> SPI_PRR_SHIFT) & SPI_PRR_MASK);
- reg |= SPI_PRR_WPE;
-
- /* Set the PRR register and verify it is protected */
- SPIBAR32(SPI_PRR(prr)) = reg;
- reg = SPIBAR32(SPI_PRR(prr));
- if (!(reg & SPI_PRR_WPE)) {
- printk(BIOS_ERR, "ERROR: Unable to set SPI PRR %d\n", prr);
- return -1;
- }
-
- printk(BIOS_INFO, "%s: PRR %d is enabled for range 0x%08x-0x%08x\n",
- __func__, prr, start, end);
- return 0;
-}
diff --git a/src/soc/intel/skylake/stage_cache.c b/src/soc/intel/skylake/stage_cache.c
deleted file mode 100644
index 346e673cf5..0000000000
--- a/src/soc/intel/skylake/stage_cache.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <cbmem.h>
-#include <soc/smm.h>
-#include <stage_cache.h>
-#include <stdint.h>
-
-void stage_cache_external_region(void **base, size_t *size)
-{
- /* The ramstage cache lives in the TSEG region.
- * The top of ram is defined to be the TSEG base address. */
- u32 offset = smm_region_size();
- offset -= CONFIG_IED_REGION_SIZE;
- offset -= CONFIG_SMM_RESERVED_SIZE;
-
- *base = (void *)(cbmem_top() + offset);
- *size = CONFIG_SMM_RESERVED_SIZE;
-}
diff --git a/src/soc/intel/skylake/systemagent.c b/src/soc/intel/skylake/systemagent.c
index d58cf219b7..2034e8e1f1 100644
--- a/src/soc/intel/skylake/systemagent.c
+++ b/src/soc/intel/skylake/systemagent.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <console/console.h>
@@ -29,6 +30,7 @@
#include <stdlib.h>
#include <string.h>
#include <cbmem.h>
+#include <romstage_handoff.h>
#include <vendorcode/google/chromeos/chromeos.h>
#include <soc/cpu.h>
#include <soc/iomap.h>
@@ -54,17 +56,17 @@ static int get_pcie_bar(device_t dev, unsigned int index, u32 *base, u32 *len)
return 0;
switch ((pciexbar_reg >> 1) & 3) {
- case 0: // 256MB
+ case 0: /* 256MB */
*base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|
(1 << 28));
*len = 256 * 1024 * 1024;
return 1;
- case 1: // 128M
+ case 1: /* 128M */
*base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|
(1 << 28)|(1 << 27));
*len = 128 * 1024 * 1024;
return 1;
- case 2: // 64M
+ case 2: /* 64M */
*base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|
(1 << 28)|(1 << 27)|(1 << 26));
*len = 64 * 1024 * 1024;
@@ -90,11 +92,13 @@ static int get_bar(device_t dev, unsigned int index, u32 *base, u32 *len)
return 1;
}
-/* There are special BARs that actually are programmed in the MCHBAR. These
+/*
+ * There are special BARs that actually are programmed in the MCHBAR. These
* Intel special features, but they do consume resources that need to be
- * accounted for. */
+ * accounted for.
+ */
static int get_bar_in_mchbar(device_t dev, unsigned int index, u32 *base,
- u32 *len)
+ u32 *len)
{
u32 bar;
@@ -114,7 +118,7 @@ struct fixed_mmio_descriptor {
unsigned int index;
u32 size;
int (*get_resource)(device_t dev, unsigned int index,
- u32 *base, u32 *size);
+ u32 *base, u32 *size);
const char *description;
};
@@ -144,13 +148,13 @@ static void mc_add_fixed_mmio_resources(device_t dev)
size = mc_fixed_resources[i].size;
index = mc_fixed_resources[i].index;
if (!mc_fixed_resources[i].get_resource(dev, index,
- &base, &size))
+ &base, &size))
continue;
resource = new_resource(dev, mc_fixed_resources[i].index);
resource->flags = IORESOURCE_MEM | IORESOURCE_FIXED |
- IORESOURCE_STORED | IORESOURCE_RESERVE |
- IORESOURCE_ASSIGNED;
+ IORESOURCE_STORED | IORESOURCE_RESERVE |
+ IORESOURCE_ASSIGNED;
resource->base = base;
resource->size = size;
printk(BIOS_DEBUG, "%s: Adding %s @ %x 0x%08lx-0x%08lx.\n",
@@ -159,7 +163,8 @@ static void mc_add_fixed_mmio_resources(device_t dev)
}
}
-/* Host Memory Map:
+/*
+ * Host Memory Map:
*
* +--------------------------+ TOUUD
* | |
@@ -172,6 +177,10 @@ static void mc_add_fixed_mmio_resources(device_t dev)
* +--------------------------+ BGSM
* | TSEG |
* +--------------------------+ TSEGMB
+ * | DMA Protected Region |
+ * +--------------------------+ DPR
+ * | Reserved - FSP |
+ * +--------------------------+ RSVFSP
* | Usage DRAM |
* +--------------------------+ 0
*
@@ -189,7 +198,7 @@ struct map_entry {
};
static void read_map_entry(device_t dev, struct map_entry *entry,
- uint64_t *result)
+ uint64_t *result)
{
uint64_t value;
uint64_t mask;
@@ -240,7 +249,7 @@ enum {
BGSM_REG,
BDSM_REG,
TSEG_REG,
- // Must be last.
+ /* Must be last. */
NUM_MAP_ENTRIES
};
@@ -260,9 +269,8 @@ static struct map_entry memory_map[NUM_MAP_ENTRIES] = {
static void mc_read_map_entries(device_t dev, uint64_t *values)
{
int i;
- for (i = 0; i < NUM_MAP_ENTRIES; i++) {
+ for (i = 0; i < NUM_MAP_ENTRIES; i++)
read_map_entry(dev, &memory_map[i], &values[i]);
- }
}
static void mc_report_map_entries(device_t dev, uint64_t *values)
@@ -343,23 +351,26 @@ static void mc_add_dram_resources(device_t dev)
base_k = 0xc0000 >> 10;
size_k = (unsigned long)(mc_values[TSEG_REG] >> 10) - base_k;
size_k -= dpr_size >> 10;
+ size_k -= CONFIG_CHIPSET_RESERVED_MEM_BYTES >> 10;
ram_resource(dev, index++, base_k, size_k);
/* TSEG - DPR -> BGSM */
resource = new_resource(dev, index++);
resource->base = mc_values[TSEG_REG] - dpr_size;
resource->size = mc_values[BGSM_REG] - resource->base;
+ resource->base -= CONFIG_CHIPSET_RESERVED_MEM_BYTES;
+ resource->size += CONFIG_CHIPSET_RESERVED_MEM_BYTES;
resource->flags = IORESOURCE_MEM | IORESOURCE_FIXED |
- IORESOURCE_STORED | IORESOURCE_RESERVE |
- IORESOURCE_ASSIGNED | IORESOURCE_CACHEABLE;
+ IORESOURCE_STORED | IORESOURCE_RESERVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_CACHEABLE;
/* BGSM -> TOLUD */
resource = new_resource(dev, index++);
resource->base = mc_values[BGSM_REG];
resource->size = mc_values[TOLUD_REG] - resource->base;
resource->flags = IORESOURCE_MEM | IORESOURCE_FIXED |
- IORESOURCE_STORED | IORESOURCE_RESERVE |
- IORESOURCE_ASSIGNED;
+ IORESOURCE_STORED | IORESOURCE_RESERVE |
+ IORESOURCE_ASSIGNED;
/* 4GiB -> TOUUD */
base_k = 4096 * 1024; /* 4GiB */
@@ -368,14 +379,15 @@ static void mc_add_dram_resources(device_t dev)
if (touud_k > base_k)
ram_resource(dev, index++, base_k, size_k);
- /* Reserve everything between A segment and 1MB:
+ /*
+ * Reserve everything between A segment and 1MB:
*
* 0xa0000 - 0xbffff: legacy VGA
* 0xc0000 - 0xfffff: RAM
*/
mmio_resource(dev, index++, (0xa0000 >> 10), (0xc0000 - 0xa0000) >> 10);
reserved_ram_resource(dev, index++, (0xc0000 >> 10),
- (0x100000 - 0xc0000) >> 10);
+ (0x100000 - 0xc0000) >> 10);
chromeos_reserve_ram_oops(dev, index++);
}
@@ -416,32 +428,39 @@ static void systemagent_init(struct device *dev)
set_power_limits(28);
}
-unsigned long acpi_fill_slit(unsigned long current)
+static void systemagent_enable(device_t dev)
{
- // Not implemented
- return current;
-}
-
-unsigned long acpi_fill_srat(unsigned long current)
-{
- /* No NUMA, no SRAT */
- return current;
+#if CONFIG_HAVE_ACPI_RESUME
+ struct romstage_handoff *handoff;
+
+ handoff = cbmem_find(CBMEM_ID_ROMSTAGE_INFO);
+
+ if (handoff == NULL) {
+ printk(BIOS_DEBUG, "Unknown boot method, assuming normal.\n");
+ acpi_slp_type = 0;
+ } else if (handoff->s3_resume) {
+ printk(BIOS_DEBUG, "S3 Resume.\n");
+ acpi_slp_type = 3;
+ } else {
+ printk(BIOS_DEBUG, "Normal boot.\n");
+ acpi_slp_type = 0;
+ }
+#endif
}
static struct device_operations systemagent_ops = {
.read_resources = &systemagent_read_resources,
- .acpi_fill_ssdt_generator = &generate_cpu_entries,
.set_resources = &pci_dev_set_resources,
.enable_resources = &pci_dev_enable_resources,
.init = &systemagent_init,
- .ops_pci = &broadwell_pci_ops,
+ .enable = &systemagent_enable,
+ .ops_pci = &soc_pci_ops,
};
static const unsigned short systemagent_ids[] = {
- 0x0a04, /* Haswell ULT */
- 0x1604, /* Broadwell-U/Y */
- 0x1610, /* Broadwell-H Desktop */
- 0x1614, /* Broadwell-H Mobile */
+ MCH_SKYLAKE_ID_U,
+ MCH_SKYLAKE_ID_Y,
+ MCH_SKYLAKE_ID_ULX,
0
};
diff --git a/src/soc/intel/skylake/tsc_freq.c b/src/soc/intel/skylake/tsc_freq.c
index 5487b16b8c..5990d27e13 100644
--- a/src/soc/intel/skylake/tsc_freq.c
+++ b/src/soc/intel/skylake/tsc_freq.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <stdint.h>
diff --git a/src/soc/intel/skylake/uart.c b/src/soc/intel/skylake/uart.c
new file mode 100644
index 0000000000..36b1b5a71b
--- /dev/null
+++ b/src/soc/intel/skylake/uart.c
@@ -0,0 +1,76 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Google Inc.
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <console/uart.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <stdlib.h>
+#include <soc/pci_devs.h>
+#include <soc/ramstage.h>
+
+static int pch_uart_is_debug(struct device *dev)
+{
+ if (!IS_ENABLED(CONFIG_INTEL_PCH_UART_CONSOLE))
+ return 0;
+
+ switch (dev->path.pci.devfn) {
+ case PCH_DEVFN_UART0:
+ return CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 0;
+ case PCH_DEVFN_UART1:
+ return CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 1;
+ case PCH_DEVFN_UART2:
+ return CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 2;
+ }
+ return 0;
+}
+
+static void pch_uart_read_resources(struct device *dev)
+{
+ pci_dev_read_resources(dev);
+
+ /* Set the configured UART base address for the debug port */
+ if (pch_uart_is_debug(dev)) {
+ struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ res->size = 0x1000;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED |
+ IORESOURCE_FIXED;
+ }
+}
+
+static struct device_operations device_ops = {
+ .read_resources = &pch_uart_read_resources,
+ .set_resources = &pci_dev_set_resources,
+ .enable_resources = &pci_dev_enable_resources,
+ .ops_pci = &soc_pci_ops,
+};
+
+static const unsigned short pci_device_ids[] = {
+ 0x9d27, /* UART0 */
+ 0x9d28, /* UART1 */
+ 0x9d66, /* UART2 */
+ 0
+};
+
+static const struct pci_driver pch_uart __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .devices = pci_device_ids,
+};
diff --git a/src/soc/intel/skylake/usbdebug.c b/src/soc/intel/skylake/usbdebug.c
deleted file mode 100644
index 736a1a3c44..0000000000
--- a/src/soc/intel/skylake/usbdebug.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <stdint.h>
-#include <arch/io.h>
-#include <console/console.h>
-#include <usbdebug.h>
-#include <device/pci.h>
-#include <device/pci_def.h>
-#include <soc/pci_devs.h>
-
-void set_debug_port(unsigned int port)
-{
- /* Hardcoded to physical port 1 */
-}
-
-void enable_usbdebug(unsigned int port)
-{
- u32 tmp32;
-
- tmp32 = pci_read_config32(PCH_DEV_EHCI, PCI_VENDOR_ID);
- if (tmp32 == 0xffffffff || tmp32 == 0)
- return;
-
- /* Set the EHCI BAR address. */
- pci_write_config32(PCH_DEV_EHCI, EHCI_BAR_INDEX, CONFIG_EHCI_BAR);
-
- /* Enable access to the EHCI memory space registers. */
- pci_write_config8(PCH_DEV_EHCI, PCI_COMMAND, PCI_COMMAND_MEMORY);
-
- /* Force ownership of the Debug Port to the EHCI controller. */
- tmp32 = read32(CONFIG_EHCI_BAR + CONFIG_EHCI_DEBUG_OFFSET);
- tmp32 |= (1 << 30);
- write32(CONFIG_EHCI_BAR + CONFIG_EHCI_DEBUG_OFFSET, tmp32);
-}
diff --git a/src/soc/intel/skylake/xhci.c b/src/soc/intel/skylake/xhci.c
index 9d0390e1a2..275739730a 100644
--- a/src/soc/intel/skylake/xhci.c
+++ b/src/soc/intel/skylake/xhci.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
*/
#include <console/console.h>
@@ -27,209 +28,15 @@
#include <soc/xhci.h>
#include <soc/cpu.h>
-#ifdef __SMM__
-static u8 *usb_xhci_mem_base(device_t dev)
-{
- u32 mem_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
-
- /* Check if the controller is disabled or not present */
- if (mem_base == 0 || mem_base == 0xffffffff)
- return 0;
-
- return (u8 *)(mem_base & ~0xf);
-}
-
-static int usb_xhci_port_count_usb3(device_t dev)
-{
- /* PCH-LP has 4 SS ports */
- return 4;
-}
-
-static void usb_xhci_reset_status_usb3(u8 *mem_base, int port)
-{
- u8 *portsc = mem_base + XHCI_USB3_PORTSC(port);
- u32 status = read32(portsc);
- /* Do not set Port Enabled/Disabled field */
- status &= ~XHCI_USB3_PORTSC_PED;
- /* Clear all change status bits */
- status |= XHCI_USB3_PORTSC_CHST;
- write32(portsc, status);
-}
-
-static void usb_xhci_reset_port_usb3(u8 *mem_base, int port)
-{
- u8 *portsc = mem_base + XHCI_USB3_PORTSC(port);
- write32(portsc, read32(portsc) | XHCI_USB3_PORTSC_WPR);
-}
-
-#define XHCI_RESET_DELAY_US 1000 /* 1ms */
-#define XHCI_RESET_TIMEOUT 100 /* 100ms */
-
-/*
- * 1) Wait until port is done polling
- * 2) If port is disconnected
- * a) Issue warm port reset
- * b) Poll for warm reset complete
- * c) Write 1 to port change status bits
- */
-static void usb_xhci_reset_usb3(device_t dev, int all)
-{
- u32 status, port_disabled;
- int timeout, port;
- int port_count = usb_xhci_port_count_usb3(dev);
- u8 *mem_base = usb_xhci_mem_base(dev);
-
- if (!mem_base || !port_count)
- return;
-
- /* Get mask of disabled ports */
- port_disabled = pci_read_config32(dev, XHCI_USB3PDO);
-
- /* Wait until all enabled ports are done polling */
- for (timeout = XHCI_RESET_TIMEOUT; timeout; timeout--) {
- int complete = 1;
- for (port = 0; port < port_count; port++) {
- /* Skip disabled ports */
- if (port_disabled & (1 << port))
- continue;
- /* Read port link status field */
- status = read32(mem_base + XHCI_USB3_PORTSC(port));
- status &= XHCI_USB3_PORTSC_PLS;
- if (status == XHCI_PLSR_POLLING)
- complete = 0;
- }
- /* Exit if all ports not polling */
- if (complete)
- break;
- udelay(XHCI_RESET_DELAY_US);
- }
-
- /* Reset all requested ports */
- for (port = 0; port < port_count; port++) {
- u8 *portsc = mem_base + XHCI_USB3_PORTSC(port);
- /* Skip disabled ports */
- if (port_disabled & (1 << port))
- continue;
- status = read32(portsc) & XHCI_USB3_PORTSC_PLS;
- /* Reset all or only disconnected ports */
- if (all || (status == XHCI_PLSR_RXDETECT ||
- status == XHCI_PLSR_POLLING))
- usb_xhci_reset_port_usb3(mem_base, port);
- else
- port_disabled |= 1 << port;
- }
-
- /* Wait for warm reset complete on all reset ports */
- for (timeout = XHCI_RESET_TIMEOUT; timeout; timeout--) {
- int complete = 1;
- for (port = 0; port < port_count; port++) {
- /* Only check ports that were reset */
- if (port_disabled & (1 << port))
- continue;
- /* Check if warm reset is complete */
- status = read32(mem_base + XHCI_USB3_PORTSC(port));
- if (!(status & XHCI_USB3_PORTSC_WRC))
- complete = 0;
- }
- /* Check for warm reset complete in any port */
- if (complete)
- break;
- udelay(XHCI_RESET_DELAY_US);
- }
-
- /* Clear port change status bits */
- for (port = 0; port < port_count; port++)
- usb_xhci_reset_status_usb3(mem_base, port);
-}
-
-/* Handler for XHCI controller on entry to S3/S4/S5 */
-void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ)
-{
- u16 reg16;
- u32 reg32;
- u8 *mem_base = usb_xhci_mem_base(dev);
- u8 is_broadwell = !!(cpu_family_model() == BROADWELL_FAMILY_ULT);
-
- if (!mem_base || slp_typ < 3)
- return;
-
- /* Set D0 state */
- reg16 = pci_read_config16(dev, XHCI_PWR_CTL_STS);
- reg16 &= ~XHCI_PWR_CTL_SET_MASK;
- reg16 |= XHCI_PWR_CTL_SET_D0;
- pci_write_config16(dev, XHCI_PWR_CTL_STS, reg16);
-
- if (!is_broadwell) {
- /* This WA is only for lpt */
-
- /* Clear PCI 0xB0[14:13] */
- reg32 = pci_read_config32(dev, 0xb0);
- reg32 &= ~((1 << 14) | (1 << 13));
- pci_write_config32(dev, 0xb0, reg32);
-
- /* Clear MMIO 0x816c[14,2] */
- reg32 = read32(mem_base + 0x816c);
- reg32 &= ~((1 << 14) | (1 << 2));
- write32(mem_base + 0x816c, reg32);
-
- /* Reset disconnected USB3 ports */
- usb_xhci_reset_usb3(dev, 0);
-
- /* Set MMIO 0x80e0[15] */
- reg32 = read32(mem_base + 0x80e0);
- reg32 |= (1 << 15);
- write32(mem_base + 0x80e0, reg32);
- } else {
- /*
- * Clear port change status bits. Clearing CSC alone seemed to
- * fix wakeup from S3 if entering USB compliance state even if
- * bit wasn't set on the port.
- */
- int port;
- for (port = 0; port < usb_xhci_port_count_usb3(dev); port++)
- usb_xhci_reset_status_usb3(mem_base, port);
- }
-
- reg32 = read32(mem_base + 0x8154);
- reg32 &= ~(1 << 31);
- write32(mem_base + 0x8154, reg32);
-
- /* Set D3Hot state and enable PME */
- pci_or_config16(dev, XHCI_PWR_CTL_STS, XHCI_PWR_CTL_SET_D3);
- pci_or_config16(dev, XHCI_PWR_CTL_STS, XHCI_PWR_CTL_STATUS_PME);
- pci_or_config16(dev, XHCI_PWR_CTL_STS, XHCI_PWR_CTL_ENABLE_PME);
-}
-#else /* !__SMM__ */
-
-static void xhci_init(struct device *dev)
-{
- struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0);
- u16 reg16;
- u32 reg32;
-
- /* Ensure controller is in D0 state */
- reg16 = pci_read_config16(dev, XHCI_PWR_CTL_STS);
- reg16 &= ~XHCI_PWR_CTL_SET_MASK;
- reg16 |= XHCI_PWR_CTL_SET_D0;
- pci_write_config16(dev, XHCI_PWR_CTL_STS, reg16);
-
- /* Disable Compliance Mode Entry */
- reg32 = read32(res2mmio(res, 0x80ec, 0));
- reg32 |= (1 << 0);
- write32(res2mmio(res, 0x80ec, 0), reg32);
-}
-
static struct device_operations usb_xhci_ops = {
.read_resources = &pci_dev_read_resources,
.set_resources = &pci_dev_set_resources,
.enable_resources = &pci_dev_enable_resources,
- .ops_pci = &broadwell_pci_ops,
- .init = &xhci_init,
+ .ops_pci = &soc_pci_ops,
};
static const unsigned short pci_device_ids[] = {
- 0x9c31, /* LynxPoint-LP */
- 0x9cb1, /* WildcatPoint */
+ 0x9d2f, /* SunRisePoint LP */
0
};
@@ -238,4 +45,3 @@ static const struct pci_driver pch_usb_xhci __pci_driver = {
.vendor = PCI_VENDOR_ID_INTEL,
.devices = pci_device_ids,
};
-#endif /* !__SMM__ */