summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/google/pit/exynos5420.h1
-rw-r--r--src/mainboard/google/pit/romstage.c92
2 files changed, 54 insertions, 39 deletions
diff --git a/src/mainboard/google/pit/exynos5420.h b/src/mainboard/google/pit/exynos5420.h
index 98d36f92e4..562d9bce66 100644
--- a/src/mainboard/google/pit/exynos5420.h
+++ b/src/mainboard/google/pit/exynos5420.h
@@ -19,6 +19,7 @@
/* I2C */
#define I2C_0_SPEED 100000
+#define I2C_4_SPEED 100000
#define I2C_SLAVE 0
/* Voltages */
diff --git a/src/mainboard/google/pit/romstage.c b/src/mainboard/google/pit/romstage.c
index 1ff8d51de2..001d8cf24e 100644
--- a/src/mainboard/google/pit/romstage.c
+++ b/src/mainboard/google/pit/romstage.c
@@ -1,7 +1,7 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2012 The ChromiumOS Authors. All rights reserved.
+ * Copyright 2013 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -18,6 +18,7 @@
*/
#include <types.h>
+#include <stdlib.h>
#include <armv7.h>
#include <cbfs.h>
@@ -35,60 +36,73 @@
#include <console/console.h>
#include <arch/stages.h>
-#include <drivers/maxim/max77686/max77686.h>
+#include <drivers/maxim/max77802/max77802.h>
#include <device/i2c.h>
#include "exynos5420.h"
-#define PMIC_BUS 0
#define MMC0_GPIO_PIN (58)
+struct pmic_write
+{
+ int or_orig; // Whether to or in the original value.
+ uint8_t reg; // Register to write.
+ uint8_t val; // Value to write.
+};
+
+/*
+ * Use read-modify-write for MAX77802 control registers and clobber the
+ * output voltage setting (BUCK?DVS?) registers.
+ */
+struct pmic_write pmic_writes[] =
+{
+ { 1, MAX77802_REG_PMIC_32KHZ, MAX77802_32KHCP_EN },
+ { 0, MAX77802_REG_PMIC_BUCK1DVS1, MAX77802_BUCK1DVS1_1V },
+ { 1, MAX77802_REG_PMIC_BUCK1CTRL, MAX77802_BUCK_TYPE1_ON |
+ MAX77802_BUCK_TYPE1_IGNORE_PWRREQ },
+ { 0, MAX77802_REG_PMIC_BUCK2DVS1, MAX77802_BUCK2DVS1_1V },
+ { 1, MAX77802_REG_PMIC_BUCK2CTRL1, MAX77802_BUCK_TYPE2_ON |
+ MAX77802_BUCK_TYPE2_IGNORE_PWRREQ },
+ { 0, MAX77802_REG_PMIC_BUCK3DVS1, MAX77802_BUCK3DVS1_1V },
+ { 1, MAX77802_REG_PMIC_BUCK3CTRL1, MAX77802_BUCK_TYPE2_ON |
+ MAX77802_BUCK_TYPE2_IGNORE_PWRREQ },
+ { 0, MAX77802_REG_PMIC_BUCK4DVS1, MAX77802_BUCK4DVS1_1V },
+ { 1, MAX77802_REG_PMIC_BUCK4CTRL1, MAX77802_BUCK_TYPE2_ON |
+ MAX77802_BUCK_TYPE2_IGNORE_PWRREQ },
+ { 0, MAX77802_REG_PMIC_BUCK6DVS1, MAX77802_BUCK6DVS1_1V },
+ { 1, MAX77802_REG_PMIC_BUCK6CTRL, MAX77802_BUCK_TYPE1_ON |
+ MAX77802_BUCK_TYPE1_IGNORE_PWRREQ }
+};
+
static void setup_power(void)
{
int error = 0;
+ int i;
power_init();
/* Initialize I2C bus to configure PMIC. */
- exynos_pinmux_i2c0();
- i2c_init(0, I2C_0_SPEED, 0x00);
+ exynos_pinmux_i2c4();
+ i2c_init(4, I2C_4_SPEED, 0x00);
printk(BIOS_DEBUG, "%s: Setting up PMIC...\n", __func__);
- /*
- * We're using CR1616 coin cell battery that is non-rechargeable
- * battery. But, BBCHOSTEN bit of the BBAT Charger Register in
- * MAX77686 is enabled by default for charging coin cell.
- *
- * Also, we cannot meet the coin cell reverse current spec. in UL
- * standard if BBCHOSTEN bit is enabled.
- *
- * Disable Coin BATT Charging
- */
- error = max77686_disable_backup_batt(PMIC_BUS);
-
- error |= max77686_volsetting(PMIC_BUS, PMIC_BUCK2, VDD_ARM_MV,
- REG_ENABLE, MAX77686_MV);
- error |= max77686_volsetting(PMIC_BUS, PMIC_BUCK3, VDD_INT_UV,
- REG_ENABLE, MAX77686_UV);
- error |= max77686_volsetting(PMIC_BUS, PMIC_BUCK1, VDD_MIF_MV,
- REG_ENABLE, MAX77686_MV);
- error |= max77686_volsetting(PMIC_BUS, PMIC_BUCK4, VDD_G3D_MV,
- REG_ENABLE, MAX77686_MV);
- error |= max77686_volsetting(PMIC_BUS, PMIC_LDO2, VDD_LDO2_MV,
- REG_ENABLE, MAX77686_MV);
- error |= max77686_volsetting(PMIC_BUS, PMIC_LDO3, VDD_LDO3_MV,
- REG_ENABLE, MAX77686_MV);
- error |= max77686_volsetting(PMIC_BUS, PMIC_LDO5, VDD_LDO5_MV,
- REG_ENABLE, MAX77686_MV);
- error |= max77686_volsetting(PMIC_BUS, PMIC_LDO10, VDD_LDO10_MV,
- REG_ENABLE, MAX77686_MV);
-
- error |= max77686_enable_32khz_cp(PMIC_BUS);
-
- if (error) {
- printk(BIOS_CRIT, "%s: PMIC error: %#x\n", __func__, error);
- die("Failed to intialize PMIC.\n");
+
+ for (i = 0; i < ARRAY_SIZE(pmic_writes); i++) {
+ uint8_t data = 0;
+ uint8_t reg = pmic_writes[i].reg;
+
+ if (pmic_writes[i].or_orig)
+ error |= i2c_read(4, MAX77802_I2C_ADDR,
+ reg, sizeof(reg),
+ &data, sizeof(data));
+ data |= pmic_writes[i].val;
+ error |= i2c_write(4, MAX77802_I2C_ADDR,
+ reg, sizeof(reg),
+ &data, sizeof(data));
}
+
+ if (error)
+ die("Failed to intialize PMIC.\n");
}
static void setup_storage(void)