diff options
| -rw-r--r-- | src/drivers/pci/onboard/onboard.c | 52 |
1 files changed, 52 insertions, 0 deletions
diff --git a/src/drivers/pci/onboard/onboard.c b/src/drivers/pci/onboard/onboard.c index 09ee9bdb91..784fde27e1 100644 --- a/src/drivers/pci/onboard/onboard.c +++ b/src/drivers/pci/onboard/onboard.c @@ -11,6 +11,58 @@ #include <device/pci_ops.h> #include "chip.h" +/*you need to + 1.add + chip drivers/pci/onboard + device pci x.0 on end + register "rom_address" = "0xfff80000" + end + in your MB mainboard Config.lb + 2. add + # 48K for SCSI FW or ATI ROM + option ROM_SIZE = 475136 + in your MB targets Config.lb, afer romimage "normal" + 3. create you vgabios.bin under normal bios and put that in dir that targets Config residues. + # dd if=/dev/mem of=atix.rom skip=1536 count=96 + 4. after build linuxbios.rom + # cat ../atix.rom ./normal/linuxbios.rom ./fallback/linuxbios.rom > linuxbios.rom + or use nsxv to build you image + # time ./nsxv s2850 + +put following in nsxv and put nsxv in your LBROOT + +#!/bin/bash +MBVENDOR=tyan +MBMODEL=$1 +LBROOT=/home/yhlu/xx/xx + +echo $1 +date + +cd "$LBROOT/freebios2/targets" +rm -rf "$MBVENDOR/$MBMODEL/$MBMODEL" +./buildtarget "$MBVENDOR/$MBMODEL" &> "$LBROOT/x_b.txt" +cd "$MBVENDOR/$MBMODEL/$MBMODEL" +#make clean +eval make &> "$LBROOT/x_m.txt" + if [ $? -eq 0 ]; then + echo "ok." + else + echo "FAILED! Log excerpt:" + tail -n 15 "$LBROOT/x_m.txt" + exit + fi +cat ../atix.rom ./normal/linuxbios.rom ./fallback/linuxbios.rom > "$LBROOT/rom/"$MBMODEL"_linuxbios.rom" +cp -f "$LBROOT/rom/"$MBMODEL"_linuxbios.rom" /home/yhlu/ + +date + + +*/ + + + + static void onboard_enable(device_t dev) { struct drivers_pci_onboard_config *conf; |