summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/cpu/allwinner/a10/clock.c12
-rw-r--r--src/cpu/allwinner/a10/gpio.c2
-rw-r--r--src/cpu/allwinner/a10/pinmux.c4
-rw-r--r--src/cpu/allwinner/a10/raminit.c28
-rw-r--r--src/cpu/allwinner/a10/timer.c6
-rw-r--r--src/cpu/allwinner/a10/twi.c14
-rw-r--r--src/cpu/allwinner/a10/uart.c12
-rw-r--r--src/cpu/ti/am335x/pinmux.c158
-rw-r--r--src/cpu/ti/am335x/uart.c52
-rw-r--r--src/drivers/gic/gic.c2
-rw-r--r--src/drivers/pc80/tpm/tpm.c22
-rw-r--r--src/drivers/xgi/common/vb_init.c8
-rw-r--r--src/mainboard/cubietech/cubieboard/bootblock.c14
-rw-r--r--src/mainboard/google/nyan/bootblock.c2
-rw-r--r--src/mainboard/google/nyan/mainboard.c8
-rw-r--r--src/mainboard/google/nyan_big/bootblock.c2
-rw-r--r--src/mainboard/google/nyan_big/mainboard.c8
-rw-r--r--src/mainboard/google/nyan_blaze/bootblock.c2
-rw-r--r--src/mainboard/google/nyan_blaze/mainboard.c8
-rw-r--r--src/mainboard/google/peach_pit/mainboard.c4
-rw-r--r--src/mainboard/google/rush/bootblock.c2
-rw-r--r--src/mainboard/google/rush_ryu/bootblock.c2
-rw-r--r--src/mainboard/google/storm/reset.c12
-rw-r--r--src/mainboard/google/veyron_brain/bootblock.c8
-rw-r--r--src/mainboard/google/veyron_brain/mainboard.c18
-rw-r--r--src/mainboard/google/veyron_brain/romstage.c2
-rw-r--r--src/mainboard/google/veyron_danger/bootblock.c8
-rw-r--r--src/mainboard/google/veyron_danger/mainboard.c22
-rw-r--r--src/mainboard/google/veyron_danger/romstage.c2
-rw-r--r--src/mainboard/google/veyron_jerry/bootblock.c10
-rw-r--r--src/mainboard/google/veyron_jerry/mainboard.c24
-rw-r--r--src/mainboard/google/veyron_jerry/romstage.c2
-rw-r--r--src/mainboard/google/veyron_mighty/bootblock.c10
-rw-r--r--src/mainboard/google/veyron_mighty/mainboard.c24
-rw-r--r--src/mainboard/google/veyron_mighty/romstage.c2
-rw-r--r--src/mainboard/google/veyron_pinky/bootblock.c10
-rw-r--r--src/mainboard/google/veyron_pinky/mainboard.c24
-rw-r--r--src/mainboard/google/veyron_pinky/romstage.c2
-rw-r--r--src/mainboard/google/veyron_rialto/bootblock.c8
-rw-r--r--src/mainboard/google/veyron_rialto/mainboard.c14
-rw-r--r--src/mainboard/google/veyron_rialto/romstage.c2
-rw-r--r--src/mainboard/google/veyron_speedy/bootblock.c10
-rw-r--r--src/mainboard/google/veyron_speedy/mainboard.c24
-rw-r--r--src/mainboard/google/veyron_speedy/romstage.c2
-rw-r--r--src/mainboard/ti/beaglebone/bootblock.c4
-rw-r--r--src/soc/broadcom/cygnus/timer.c14
-rw-r--r--src/soc/nvidia/tegra/apbmisc.c4
-rw-r--r--src/soc/nvidia/tegra/gpio.c4
-rw-r--r--src/soc/nvidia/tegra/i2c.c12
-rw-r--r--src/soc/nvidia/tegra/pingroup.c2
-rw-r--r--src/soc/nvidia/tegra/pinmux.c2
-rw-r--r--src/soc/nvidia/tegra/usb.c30
-rw-r--r--src/soc/nvidia/tegra124/clock.c148
-rw-r--r--src/soc/nvidia/tegra124/display.c4
-rw-r--r--src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c85
-rw-r--r--src/soc/nvidia/tegra124/power.c6
-rw-r--r--src/soc/nvidia/tegra124/sdram.c532
-rw-r--r--src/soc/nvidia/tegra124/spi.c23
-rw-r--r--src/soc/nvidia/tegra124/uart.c18
-rw-r--r--src/soc/nvidia/tegra132/addressmap.c6
-rw-r--r--src/soc/nvidia/tegra132/bootblock.c2
-rw-r--r--src/soc/nvidia/tegra132/ccplex.c14
-rw-r--r--src/soc/nvidia/tegra132/clock.c92
-rw-r--r--src/soc/nvidia/tegra132/cpu.c10
-rw-r--r--src/soc/nvidia/tegra132/dc.c4
-rw-r--r--src/soc/nvidia/tegra132/dsi.c2
-rw-r--r--src/soc/nvidia/tegra132/flow_ctrl.c8
-rw-r--r--src/soc/nvidia/tegra132/i2c6.c4
-rw-r--r--src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c79
-rw-r--r--src/soc/nvidia/tegra132/mipi.c4
-rw-r--r--src/soc/nvidia/tegra132/padconfig.c14
-rw-r--r--src/soc/nvidia/tegra132/power.c2
-rw-r--r--src/soc/nvidia/tegra132/sdram.c551
-rw-r--r--src/soc/nvidia/tegra132/soc.c6
-rw-r--r--src/soc/nvidia/tegra132/spi.c26
-rw-r--r--src/soc/nvidia/tegra132/uart.c18
-rw-r--r--src/soc/qualcomm/ipq806x/blobs_init.c12
-rw-r--r--src/soc/qualcomm/ipq806x/clock.c46
-rw-r--r--src/soc/qualcomm/ipq806x/gpio.c8
-rw-r--r--src/soc/qualcomm/ipq806x/gsbi.c20
-rw-r--r--src/soc/qualcomm/ipq806x/lcc.c38
-rw-r--r--src/soc/qualcomm/ipq806x/qup.c80
-rw-r--r--src/soc/qualcomm/ipq806x/spi.c2
-rw-r--r--src/soc/qualcomm/ipq806x/uart.c81
-rw-r--r--src/soc/qualcomm/ipq806x/usb.c32
-rw-r--r--src/soc/rockchip/rk3288/clock.c161
-rw-r--r--src/soc/rockchip/rk3288/crypto.c20
-rw-r--r--src/soc/rockchip/rk3288/edp.c205
-rw-r--r--src/soc/rockchip/rk3288/gpio.c7
-rw-r--r--src/soc/rockchip/rk3288/i2c.c61
-rw-r--r--src/soc/rockchip/rk3288/pwm.c12
-rw-r--r--src/soc/rockchip/rk3288/sdram.c202
-rw-r--r--src/soc/rockchip/rk3288/software_i2c.c24
-rw-r--r--src/soc/rockchip/rk3288/spi.c22
-rw-r--r--src/soc/rockchip/rk3288/timer.c6
-rw-r--r--src/soc/rockchip/rk3288/tsadc.c12
-rw-r--r--src/soc/rockchip/rk3288/uart.c27
-rw-r--r--src/soc/rockchip/rk3288/vop.c59
-rw-r--r--src/soc/samsung/exynos5250/clock.c66
-rw-r--r--src/soc/samsung/exynos5250/clock_init.c212
-rw-r--r--src/soc/samsung/exynos5250/cpu.c2
-rw-r--r--src/soc/samsung/exynos5250/dmc_common.c50
-rw-r--r--src/soc/samsung/exynos5250/dmc_init_ddr3.c129
-rw-r--r--src/soc/samsung/exynos5250/dp-reg.c192
-rw-r--r--src/soc/samsung/exynos5250/fb.c52
-rw-r--r--src/soc/samsung/exynos5250/gpio.c28
-rw-r--r--src/soc/samsung/exynos5250/i2c.c34
-rw-r--r--src/soc/samsung/exynos5250/power.c2
-rw-r--r--src/soc/samsung/exynos5250/spi.c18
-rw-r--r--src/soc/samsung/exynos5250/timer.c7
-rw-r--r--src/soc/samsung/exynos5250/tmu.c20
-rw-r--r--src/soc/samsung/exynos5250/trustzone.c10
-rw-r--r--src/soc/samsung/exynos5250/uart.c22
-rw-r--r--src/soc/samsung/exynos5250/usb.c69
-rw-r--r--src/soc/samsung/exynos5420/clock.c92
-rw-r--r--src/soc/samsung/exynos5420/clock_init.c200
-rw-r--r--src/soc/samsung/exynos5420/dmc_common.c42
-rw-r--r--src/soc/samsung/exynos5420/dmc_init_ddr3.c200
-rw-r--r--src/soc/samsung/exynos5420/dp_lowlevel.c2
-rw-r--r--src/soc/samsung/exynos5420/fimd.c4
-rw-r--r--src/soc/samsung/exynos5420/gpio.c28
-rw-r--r--src/soc/samsung/exynos5420/i2c.c72
-rw-r--r--src/soc/samsung/exynos5420/power.c2
-rw-r--r--src/soc/samsung/exynos5420/smp.c22
-rw-r--r--src/soc/samsung/exynos5420/spi.c18
-rw-r--r--src/soc/samsung/exynos5420/timer.c7
-rw-r--r--src/soc/samsung/exynos5420/tmu.c20
-rw-r--r--src/soc/samsung/exynos5420/trustzone.c10
-rw-r--r--src/soc/samsung/exynos5420/uart.c20
-rw-r--r--src/soc/samsung/exynos5420/usb.c69
-rw-r--r--src/vendorcode/google/chromeos/watchdog.c6
131 files changed, 2536 insertions, 2670 deletions
diff --git a/src/cpu/allwinner/a10/clock.c b/src/cpu/allwinner/a10/clock.c
index e7984dd328..c22b24273e 100644
--- a/src/cpu/allwinner/a10/clock.c
+++ b/src/cpu/allwinner/a10/clock.c
@@ -28,7 +28,7 @@ void a1x_periph_clock_enable(enum a1x_clken periph)
addr = (void *)A1X_CCM_BASE + (periph >> 5);
reg32 = read32(addr);
reg32 |= 1 << (periph & 0x1f);
- writel(reg32, addr);
+ write32(addr, reg32);
}
/**
@@ -44,7 +44,7 @@ void a1x_periph_clock_disable(enum a1x_clken periph)
addr = (void *)A1X_CCM_BASE + (periph >> 5);
reg32 = read32(addr);
reg32 &= ~(1 << (periph & 0x1f));
- writel(reg32, addr);
+ write32(addr, reg32);
}
/**
@@ -88,7 +88,7 @@ void a1x_pll5_configure(u8 mul_n, u8 mul_k, u8 div_m, u8 exp_div_p)
reg32 |= (PLL5_FACTOR_M(div_m) | PLL5_FACTOR_N(mul_n) |
PLL5_FACTOR_K(mul_k) | PLL5_DIV_EXP_P(exp_div_p));
reg32 |= PLL5_PLL_ENABLE;
- writel(reg32, &ccm->pll5_cfg);
+ write32(&ccm->pll5_cfg, reg32);
}
/**
@@ -166,7 +166,7 @@ static void cpu_clk_src_switch(u32 clksel_bits)
reg32 = read32(&ccm->cpu_ahb_apb0_cfg);
reg32 &= ~CPU_CLK_SRC_MASK;
reg32 |= clksel_bits & CPU_CLK_SRC_MASK;
- writel(reg32, &ccm->cpu_ahb_apb0_cfg);
+ write32(&ccm->cpu_ahb_apb0_cfg, reg32);
}
static void change_sys_divisors(u8 axi, u8 ahb_exp, u8 apb0_exp)
@@ -179,7 +179,7 @@ static void change_sys_divisors(u8 axi, u8 ahb_exp, u8 apb0_exp)
reg32 |= ((axi - 1) << 0) & AXI_DIV_MASK;
reg32 |= (ahb_exp << 4) & AHB_DIV_MASK;
reg32 |= (apb0_exp << 8) & APB0_DIV_MASK;
- writel(reg32, &ccm->cpu_ahb_apb0_cfg);
+ write32(&ccm->cpu_ahb_apb0_cfg, reg32);
}
static void spin_delay(u32 loops)
@@ -262,7 +262,7 @@ void a1x_set_cpu_clock(u16 cpu_clk_mhz)
change_sys_divisors(axi, ahb_exp, apb0_exp);
/* Configure PLL1 at the desired frequency */
- writel(pll1_table[i].pll1_cfg, &ccm->pll1_cfg);
+ write32(&ccm->pll1_cfg, pll1_table[i].pll1_cfg);
spin_delay(8);
cpu_clk_src_switch(CPU_CLK_SRC_PLL1);
diff --git a/src/cpu/allwinner/a10/gpio.c b/src/cpu/allwinner/a10/gpio.c
index 61f120d714..95854e580c 100644
--- a/src/cpu/allwinner/a10/gpio.c
+++ b/src/cpu/allwinner/a10/gpio.c
@@ -76,7 +76,7 @@ void gpio_write(u8 port, u32 val)
if ((port > GPS))
return;
- writel(val, &gpio->port[port].dat);
+ write32(&gpio->port[port].dat, val);
}
/**
diff --git a/src/cpu/allwinner/a10/pinmux.c b/src/cpu/allwinner/a10/pinmux.c
index d22647fc70..f5ed19a69a 100644
--- a/src/cpu/allwinner/a10/pinmux.c
+++ b/src/cpu/allwinner/a10/pinmux.c
@@ -33,7 +33,7 @@ void gpio_set_pin_func(u8 port, u8 pin, u8 pad_func)
reg32 = read32(&gpio->port[port].cfg[reg]);
reg32 &= ~(0xf << bit);
reg32 |= (pad_func & 0xf) << bit;
- writel(reg32, &gpio->port[port].cfg[reg]);
+ write32(&gpio->port[port].cfg[reg], reg32);
}
/**
@@ -74,6 +74,6 @@ void gpio_set_multipin_func(u8 port, u32 pin_mask, u8 pad_func)
reg32 &= ~(0xf << bit);
reg32 |= (pad_func & 0xf) << bit;
}
- writel(reg32, &gpio->port[port].cfg[reg]);
+ write32(&gpio->port[port].cfg[reg], reg32);
}
}
diff --git a/src/cpu/allwinner/a10/raminit.c b/src/cpu/allwinner/a10/raminit.c
index c1df4f427a..28fd408d7e 100644
--- a/src/cpu/allwinner/a10/raminit.c
+++ b/src/cpu/allwinner/a10/raminit.c
@@ -118,7 +118,7 @@ static void mctl_configure_hostport(void)
u32 i;
for (i = 0; i < 32; i++)
- writel(hpcr_value[i], &dram->hpcr[i]);
+ write32(&dram->hpcr[i], hpcr_value[i]);
}
static void mctl_setup_dram_clock(u32 clk)
@@ -333,9 +333,9 @@ static void dramc_set_autorefresh_cycle(u32 clk)
tmp_val = tmp_val * 9 - 200;
reg32 |= tmp_val << 8;
reg32 |= 0x8 << 24;
- writel(reg32, &dram->drr);
+ write32(&dram->drr, reg32);
} else {
- writel(0x0, &dram->drr);
+ write32(&dram->drr, 0x0);
}
}
@@ -360,7 +360,7 @@ unsigned long dramc_init(struct dram_para *para)
a1x_gate_dram_clock_output();
/* select dram controller 1 */
- writel(DRAM_CSEL_MAGIC, &dram->csel);
+ write32(&dram->csel, DRAM_CSEL_MAGIC);
mctl_itm_disable();
mctl_enable_dll0(para->tpr3);
@@ -390,7 +390,7 @@ unsigned long dramc_init(struct dram_para *para)
reg32 |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
reg32 |= DRAM_DCR_CMD_RANK_ALL;
reg32 |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
- writel(reg32, &dram->dcr);
+ write32(&dram->dcr, reg32);
/* dram clock on */
a1x_ungate_dram_clock_output();
@@ -405,21 +405,21 @@ unsigned long dramc_init(struct dram_para *para)
reg32 = ((para->zq) >> 8) & 0xfffff;
reg32 |= ((para->zq) & 0xff) << 20;
reg32 |= (para->zq) & 0xf0000000;
- writel(reg32, &dram->zqcr0);
+ write32(&dram->zqcr0, reg32);
/* set I/O configure register */
reg32 = 0x00cc0000;
reg32 |= (para->odt_en) & 0x3;
reg32 |= ((para->odt_en) & 0x3) << 30;
- writel(reg32, &dram->iocr);
+ write32(&dram->iocr, reg32);
/* set refresh period */
dramc_set_autorefresh_cycle(para->clock);
/* set timing parameters */
- writel(para->tpr0, &dram->tpr0);
- writel(para->tpr1, &dram->tpr1);
- writel(para->tpr2, &dram->tpr2);
+ write32(&dram->tpr0, para->tpr0);
+ write32(&dram->tpr1, para->tpr1);
+ write32(&dram->tpr2, para->tpr2);
if (para->type == DRAM_MEMORY_TYPE_DDR3) {
reg32 = DRAM_MR_BURST_LENGTH(0x0);
@@ -430,11 +430,11 @@ unsigned long dramc_init(struct dram_para *para)
reg32 |= DRAM_MR_CAS_LAT(para->cas);
reg32 |= DRAM_MR_WRITE_RECOVERY(0x5);
}
- writel(reg32, &dram->mr);
+ write32(&dram->mr, reg32);
- writel(para->emr1, &dram->emr);
- writel(para->emr2, &dram->emr2);
- writel(para->emr3, &dram->emr3);
+ write32(&dram->emr, para->emr1);
+ write32(&dram->emr2, para->emr2);
+ write32(&dram->emr3, para->emr3);
/* set DQS window mode */
clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
diff --git a/src/cpu/allwinner/a10/timer.c b/src/cpu/allwinner/a10/timer.c
index 2ff88f528d..5082114d1b 100644
--- a/src/cpu/allwinner/a10/timer.c
+++ b/src/cpu/allwinner/a10/timer.c
@@ -24,13 +24,13 @@ void init_timer(void)
{
u32 reg32;
/* Load the timer rollover value */
- writel(0xffffffff, &tmr0->interval);
+ write32(&tmr0->interval, 0xffffffff);
/* Configure the timer to run from 24MHz oscillator, no prescaler */
reg32 = TIMER_CTRL_PRESC_DIV_EXP(0);
reg32 |= TIMER_CTRL_CLK_SRC_OSC24M;
reg32 |= TIMER_CTRL_RELOAD;
reg32 |= TIMER_CTRL_TMR_EN;
- writel(reg32, &tmr0->ctrl);
+ write32(&tmr0->ctrl, reg32);
}
void udelay(unsigned usec)
@@ -61,6 +61,6 @@ void udelay(unsigned usec)
*/
u8 a1x_get_cpu_chip_revision(void)
{
- writel(0, &timer_module->cpu_cfg);
+ write32(&timer_module->cpu_cfg, 0);
return (read32(&timer_module->cpu_cfg) >> 6) & 0x3;
}
diff --git a/src/cpu/allwinner/a10/twi.c b/src/cpu/allwinner/a10/twi.c
index b5d9880847..f780721e10 100644
--- a/src/cpu/allwinner/a10/twi.c
+++ b/src/cpu/allwinner/a10/twi.c
@@ -42,7 +42,7 @@ static void configure_clock(struct a1x_twi *twi, u32 speed_hz)
/* Pre-divide the clock by 8 */
n = 3;
m = (apb_clk >> n) / speed_hz;
- writel(TWI_CLK_M(m) | TWI_CLK_N(n), &twi->clk);
+ write32(&twi->clk, TWI_CLK_M(m) | TWI_CLK_N(n));
}
void a1x_twi_init(u8 bus, u32 speed_hz)
@@ -53,9 +53,9 @@ void a1x_twi_init(u8 bus, u32 speed_hz)
configure_clock(twi, speed_hz);
/* Enable the I²C bus */
- writel(TWI_CTL_BUS_EN, &twi->ctl);
+ write32(&twi->ctl, TWI_CTL_BUS_EN);
/* Issue soft reset */
- writel(1, &twi->reset);
+ write32(&twi->reset, 1);
while (i-- && read32(&twi->reset))
udelay(1);
@@ -63,12 +63,12 @@ void a1x_twi_init(u8 bus, u32 speed_hz)
static void clear_interrupt_flag(struct a1x_twi *twi)
{
- writel(read32(&twi->ctl) & ~TWI_CTL_INT_FLAG, &twi->ctl);
+ write32(&twi->ctl, read32(&twi->ctl) & ~TWI_CTL_INT_FLAG);
}
static void i2c_send_data(struct a1x_twi *twi, u8 data)
{
- writel(data, &twi->data);
+ write32(&twi->data, data);
clear_interrupt_flag(twi);
}
@@ -90,7 +90,7 @@ static void i2c_send_start(struct a1x_twi *twi)
reg32 = read32(&twi->ctl);
reg32 &= ~TWI_CTL_INT_FLAG;
reg32 |= TWI_CTL_M_START;
- writel(reg32, &twi->ctl);
+ write32(&twi->ctl, reg32);
/* M_START is automatically cleared after condition is transmitted */
i = TWI_TIMEOUT;
@@ -106,7 +106,7 @@ static void i2c_send_stop(struct a1x_twi *twi)
reg32 = read32(&twi->ctl);
reg32 &= ~TWI_CTL_INT_FLAG;
reg32 |= TWI_CTL_M_STOP;
- writel(reg32, &twi->ctl);
+ write32(&twi->ctl, reg32);
}
static int i2c_read(struct a1x_twi *twi, uint8_t chip,
diff --git a/src/cpu/allwinner/a10/uart.c b/src/cpu/allwinner/a10/uart.c
index 6883b4ea38..3c0286785a 100644
--- a/src/cpu/allwinner/a10/uart.c
+++ b/src/cpu/allwinner/a10/uart.c
@@ -22,10 +22,10 @@ static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bit
div = (u16) uart_baudrate_divisor(baud_rate,
uart_platform_refclk(), 16);
/* Enable access to Divisor Latch register */
- writel(UART8250_LCR_DLAB, &uart->lcr);
+ write32(&uart->lcr, UART8250_LCR_DLAB);
/* Set baudrate */
- writel((div >> 8) & 0xff, &uart->dlh);
- writel(div & 0xff, &uart->dll);
+ write32(&uart->dlh, (div >> 8) & 0xff);
+ write32(&uart->dll, div & 0xff);
/* Set line control */
reg32 = (data_bits - 5) & UART8250_LCR_WLS_MSK;
switch (parity) {
@@ -40,12 +40,12 @@ static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bit
default:
break;
}
- writel(reg32, &uart->lcr);
+ write32(&uart->lcr, reg32);
}
static void a10_uart_enable_fifos(struct a10_uart *uart)
{
- writel(UART8250_FCR_FIFO_EN, &uart->fcr);
+ write32(&uart->fcr, UART8250_FCR_FIFO_EN);
}
static int tx_fifo_full(struct a10_uart *uart)
@@ -83,7 +83,7 @@ static void a10_uart_tx_blocking(struct a10_uart *uart, u8 data)
{
while (tx_fifo_full(uart)) ;
- return writel(data, &uart->thr);
+ return write32(&uart->thr, data);
}
diff --git a/src/cpu/ti/am335x/pinmux.c b/src/cpu/ti/am335x/pinmux.c
index 292865a495..88e5ffcbf3 100644
--- a/src/cpu/ti/am335x/pinmux.c
+++ b/src/cpu/ti/am335x/pinmux.c
@@ -28,163 +28,163 @@ static struct am335x_pinmux_regs *regs =
void am335x_pinmux_uart0(void)
{
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->uart0_rxd);
- writel(MODE(0) | PULLUDEN, &regs->uart0_txd);
+ write32(&regs->uart0_rxd, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->uart0_txd, MODE(0) | PULLUDEN);
}
void am335x_pinmux_uart1(void)
{
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->uart1_rxd);
- writel(MODE(0) | PULLUDEN, &regs->uart1_txd);
+ write32(&regs->uart1_rxd, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->uart1_txd, MODE(0) | PULLUDEN);
}
void am335x_pinmux_uart2(void)
{
// UART2_RXD
- writel(MODE(1) | PULLUP_EN | RXACTIVE, &regs->spi0_sclk);
+ write32(&regs->spi0_sclk, MODE(1) | PULLUP_EN | RXACTIVE);
// UART2_TXD
- writel(MODE(1) | PULLUDEN, &regs->spi0_d0);
+ write32(&regs->spi0_d0, MODE(1) | PULLUDEN);
}
void am335x_pinmux_uart3(void)
{
// UART3_RXD
- writel(MODE(1) | PULLUP_EN | RXACTIVE, &regs->spi0_cs1);
+ write32(&regs->spi0_cs1, MODE(1) | PULLUP_EN | RXACTIVE);
// UART3_TXD
- writel(MODE(1) | PULLUDEN, &regs->ecap0_in_pwm0_out);
+ write32(&regs->ecap0_in_pwm0_out, MODE(1) | PULLUDEN);
}
void am335x_pinmux_uart4(void)
{
// UART4_RXD
- writel(MODE(6) | PULLUP_EN | RXACTIVE, &regs->gpmc_wait0);
+ write32(&regs->gpmc_wait0, MODE(6) | PULLUP_EN | RXACTIVE);
// UART4_TXD
- writel(MODE(6) | PULLUDEN, &regs->gpmc_wpn);
+ write32(&regs->gpmc_wpn, MODE(6) | PULLUDEN);
}
void am335x_pinmux_uart5(void)
{
// UART5_RXD
- writel(MODE(4) | PULLUP_EN | RXACTIVE, &regs->lcd_data9);
+ write32(&regs->lcd_data9, MODE(4) | PULLUP_EN | RXACTIVE);
// UART5_TXD
- writel(MODE(4) | PULLUDEN, &regs->lcd_data8);
+ write32(&regs->lcd_data8, MODE(4) | PULLUDEN);
}
void am335x_pinmux_mmc0(int cd, int sk_evm)
{
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mmc0_dat0);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mmc0_dat1);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mmc0_dat2);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mmc0_dat3);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mmc0_clk);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mmc0_cmd);
+ write32(&regs->mmc0_dat0, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->mmc0_dat1, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->mmc0_dat2, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->mmc0_dat3, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->mmc0_clk, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->mmc0_cmd, MODE(0) | RXACTIVE | PULLUP_EN);
if (!sk_evm) {
// MMC0_WP
- writel(MODE(4) | RXACTIVE, &regs->mcasp0_aclkr);
+ write32(&regs->mcasp0_aclkr, MODE(4) | RXACTIVE);
}
if (cd) {
// MMC0_CD
- writel(MODE(5) | RXACTIVE | PULLUP_EN, &regs->spi0_cs1);
+ write32(&regs->spi0_cs1, MODE(5) | RXACTIVE | PULLUP_EN);
}
}
void am335x_pinmux_mmc1(void)
{
// MMC1_DAT0
- writel(MODE(1) | RXACTIVE | PULLUP_EN, &regs->gpmc_ad0);
+ write32(&regs->gpmc_ad0, MODE(1) | RXACTIVE | PULLUP_EN);
// MMC1_DAT1
- writel(MODE(1) | RXACTIVE | PULLUP_EN, &regs->gpmc_ad1);
+ write32(&regs->gpmc_ad1, MODE(1) | RXACTIVE | PULLUP_EN);
// MMC1_DAT2
- writel(MODE(1) | RXACTIVE | PULLUP_EN, &regs->gpmc_ad2);
+ write32(&regs->gpmc_ad2, MODE(1) | RXACTIVE | PULLUP_EN);
// MMC1_DAT3
- writel(MODE(1) | RXACTIVE | PULLUP_EN, &regs->gpmc_ad3);
+ write32(&regs->gpmc_ad3, MODE(1) | RXACTIVE | PULLUP_EN);
// MMC1_CLK
- writel(MODE(2) | RXACTIVE | PULLUP_EN, &regs->gpmc_csn1);
+ write32(&regs->gpmc_csn1, MODE(2) | RXACTIVE | PULLUP_EN);
// MMC1_CMD
- writel(MODE(2) | RXACTIVE | PULLUP_EN, &regs->gpmc_csn2);
+ write32(&regs->gpmc_csn2, MODE(2) | RXACTIVE | PULLUP_EN);
// MMC1_WP
- writel(MODE(7) | RXACTIVE | PULLUP_EN, &regs->gpmc_csn0);
+ write32(&regs->gpmc_csn0, MODE(7) | RXACTIVE | PULLUP_EN);
// MMC1_CD
- writel(MODE(7) | RXACTIVE | PULLUP_EN, &regs->gpmc_advn_ale);
+ write32(&regs->gpmc_advn_ale, MODE(7) | RXACTIVE | PULLUP_EN);
}
void am335x_pinmux_i2c0(void)
{
- writel(MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL, &regs->i2c0_sda);
- writel(MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL, &regs->i2c0_scl);
+ write32(&regs->i2c0_sda, MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL);
+ write32(&regs->i2c0_scl, MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL);
}
void am335x_pinmux_i2c1(void)
{
// I2C_DATA
- writel(MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL, &regs->spi0_d1);
+ write32(&regs->spi0_d1, MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL);
// I2C_SCLK
- writel(MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL, &regs->spi0_cs0);
+ write32(&regs->spi0_cs0, MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL);
}
void am335x_pinmux_spi0(void)
{
- writel(MODE(0) | RXACTIVE | PULLUDEN, &regs->spi0_sclk);
- writel(MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN, &regs->spi0_d0);
- writel(MODE(0) | RXACTIVE | PULLUDEN, &regs->spi0_d1);
- writel(MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN, &regs->spi0_cs0);
+ write32(&regs->spi0_sclk, MODE(0) | RXACTIVE | PULLUDEN);
+ write32(&regs->spi0_d0, MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN);
+ write32(&regs->spi0_d1, MODE(0) | RXACTIVE | PULLUDEN);
+ write32(&regs->spi0_cs0, MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN);
}
void am335x_pinmux_gpio0_7(void)
{
- writel(MODE(7) | PULLUDEN, &regs->ecap0_in_pwm0_out);
+ write32(&regs->ecap0_in_pwm0_out, MODE(7) | PULLUDEN);
}
void am335x_pinmux_rgmii1(void)
{
- writel(MODE(2), &regs->mii1_txen);
- writel(MODE(2) | RXACTIVE, &regs->mii1_rxdv);
- writel(MODE(2), &regs->mii1_txd0);
- writel(MODE(2), &regs->mii1_txd1);
- writel(MODE(2), &regs->mii1_txd2);
- writel(MODE(2), &regs->mii1_txd3);
- writel(MODE(2), &regs->mii1_txclk);
- writel(MODE(2) | RXACTIVE, &regs->mii1_rxclk);
- writel(MODE(2) | RXACTIVE, &regs->mii1_rxd0);
- writel(MODE(2) | RXACTIVE, &regs->mii1_rxd1);
- writel(MODE(2) | RXACTIVE, &regs->mii1_rxd2);
- writel(MODE(2) | RXACTIVE, &regs->mii1_rxd3);
+ write32(&regs->mii1_txen, MODE(2));
+ write32(&regs->mii1_rxdv, MODE(2) | RXACTIVE);
+ write32(&regs->mii1_txd0, MODE(2));
+ write32(&regs->mii1_txd1, MODE(2));
+ write32(&regs->mii1_txd2, MODE(2));
+ write32(&regs->mii1_txd3, MODE(2));
+ write32(&regs->mii1_txclk, MODE(2));
+ write32(&regs->mii1_rxclk, MODE(2) | RXACTIVE);
+ write32(&regs->mii1_rxd0, MODE(2) | RXACTIVE);
+ write32(&regs->mii1_rxd1, MODE(2) | RXACTIVE);
+ write32(&regs->mii1_rxd2, MODE(2) | RXACTIVE);
+ write32(&regs->mii1_rxd3, MODE(2) | RXACTIVE);
}
void am335x_pinmux_mii1(void)
{
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxerr);
- writel(MODE(0), &regs->mii1_txen);
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxdv);
- writel(MODE(0), &regs->mii1_txd0);
- writel(MODE(0), &regs->mii1_txd1);
- writel(MODE(0), &regs->mii1_txd2);
- writel(MODE(0), &regs->mii1_txd3);
- writel(MODE(0) | RXACTIVE, &regs->mii1_txclk);
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxclk);
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxd0);
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxd1);
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxd2);
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxd3);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mdio_data);
- writel(MODE(0) | PULLUP_EN, &regs->mdio_clk);
+ write32(&regs->mii1_rxerr, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_txen, MODE(0));
+ write32(&regs->mii1_rxdv, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_txd0, MODE(0));
+ write32(&regs->mii1_txd1, MODE(0));
+ write32(&regs->mii1_txd2, MODE(0));
+ write32(&regs->mii1_txd3, MODE(0));
+ write32(&regs->mii1_txclk, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_rxclk, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_rxd0, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_rxd1, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_rxd2, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_rxd3, MODE(0) | RXACTIVE);
+ write32(&regs->mdio_data, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->mdio_clk, MODE(0) | PULLUP_EN);
}
void am335x_pinmux_nand(void)
{
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad0);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad1);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad2);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad3);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad4);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad5);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad6);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad7);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->gpmc_wait0);
- writel(MODE(7) | PULLUP_EN | RXACTIVE, &regs->gpmc_wpn);
- writel(MODE(0) | PULLUDEN, &regs->gpmc_csn0);
- writel(MODE(0) | PULLUDEN, &regs->gpmc_advn_ale);
- writel(MODE(0) | PULLUDEN, &regs->gpmc_oen_ren);
- writel(MODE(0) | PULLUDEN, &regs->gpmc_wen);
- writel(MODE(0) | PULLUDEN, &regs->gpmc_be0n_cle);
+ write32(&regs->gpmc_ad0, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad1, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad2, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad3, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad4, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad5, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad6, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad7, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_wait0, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->gpmc_wpn, MODE(7) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_csn0, MODE(0) | PULLUDEN);
+ write32(&regs->gpmc_advn_ale, MODE(0) | PULLUDEN);
+ write32(&regs->gpmc_oen_ren, MODE(0) | PULLUDEN);
+ write32(&regs->gpmc_wen, MODE(0) | PULLUDEN);
+ write32(&regs->gpmc_be0n_cle, MODE(0) | PULLUDEN);
}
diff --git a/src/cpu/ti/am335x/uart.c b/src/cpu/ti/am335x/uart.c
index ef8e08cfb8..b2b7196649 100644
--- a/src/cpu/ti/am335x/uart.c
+++ b/src/cpu/ti/am335x/uart.c
@@ -42,88 +42,88 @@ static void am335x_uart_init(struct am335x_uart *uart, uint16_t div)
uint16_t lcr_orig, efr_orig, mcr_orig;
/* reset the UART */
- writew(uart->sysc | SYSC_SOFTRESET, &uart->sysc);
+ write16(&uart->sysc, uart->sysc | SYSC_SOFTRESET);
while (!(read16(&uart->syss) & SYSS_RESETDONE))
;
/* 1. switch to register config mode B */
lcr_orig = read16(&uart->lcr);
- writew(0xbf, &uart->lcr);
+ write16(&uart->lcr, 0xbf);
/*
* 2. Set EFR ENHANCED_EN bit. To access this bit, registers must
* be in TCR_TLR submode, meaning EFR[4] = 1 and MCR[6] = 1.
*/
efr_orig = read16(&uart->efr);
- writew(efr_orig | EFR_ENHANCED_EN, &uart->efr);
+ write16(&uart->efr, efr_orig | EFR_ENHANCED_EN);
/* 3. Switch to register config mode A */
- writew(0x80, &uart->lcr);
+ write16(&uart->lcr, 0x80);
/* 4. Enable register submode TCR_TLR to access the UARTi.UART_TLR */
mcr_orig = read16(&uart->mcr);
- writew(mcr_orig | MCR_TCR_TLR, &uart->mcr);
+ write16(&uart->mcr, mcr_orig | MCR_TCR_TLR);
/* 5. Enable the FIFO. For now we'll ignore FIFO triggers and DMA */
- writew(FCR_FIFO_EN, &uart->fcr);
+ write16(&uart->fcr, FCR_FIFO_EN);
/* 6. Switch to configuration mode B */
- writew(0xbf, &uart->lcr);
+ write16(&uart->lcr, 0xbf);
/* Skip steps 7 and 8 (setting up FIFO triggers for DMA) */
/* 9. Restore original EFR value */
- writew(efr_orig, &uart->efr);
+ write16(&uart->efr, efr_orig);
/* 10. Switch to config mode A */
- writew(0x80, &uart->lcr);
+ write16(&uart->lcr, 0x80);
/* 11. Restore original MCR value */
- writew(mcr_orig, &uart->mcr);
+ write16(&uart->mcr, mcr_orig);
/* 12. Restore original LCR value */
- writew(lcr_orig, &uart->lcr);
+ write16(&uart->lcr, lcr_orig);
/* Protocol, baud rate and interrupt settings */
/* 1. Disable UART access to DLL and DLH registers */
- writew(read16(&uart->mdr1) | 0x7, &uart->mdr1);
+ write16(&uart->mdr1, read16(&uart->mdr1) | 0x7);
/* 2. Switch to config mode B */
- writew(0xbf, &uart->lcr);
+ write16(&uart->lcr, 0xbf);
/* 3. Enable access to IER[7:4] */
- writew(efr_orig | EFR_ENHANCED_EN, &uart->efr);
+ write16(&uart->efr, efr_orig | EFR_ENHANCED_EN);
/* 4. Switch to operational mode */
- writew(0x0, &uart->lcr);
+ write16(&uart->lcr, 0x0);
/* 5. Clear IER */
- writew(0x0, &uart->ier);
+ write16(&uart->ier, 0x0);
/* 6. Switch to config mode B */
- writew(0xbf, &uart->lcr);
+ write16(&uart->lcr, 0xbf);
/* 7. Set dll and dlh to the desired values (table 19-25) */
- writew((div >> 8), &uart->dlh);
- writew((div & 0xff), &uart->dll);
+ write16(&uart->dlh, (div >> 8));
+ write16(&uart->dll, (div & 0xff));
/* 8. Switch to operational mode to access ier */
- writew(0x0, &uart->lcr);
+ write16(&uart->lcr, 0x0);
/* 9. Clear ier to disable all interrupts */
- writew(0x0, &uart->ier);
+ write16(&uart->ier, 0x0);
/* 10. Switch to config mode B */
- writew(0xbf, &uart->lcr);
+ write16(&uart->lcr, 0xbf);
/* 11. Restore efr */
- writew(efr_orig, &uart->efr);
+ write16(&uart->efr, efr_orig);
/* 12. Set protocol formatting 8n1 (8 bit data, no parity, 1 stop bit) */
- writew(0x3, &uart->lcr);
+ write16(&uart->lcr, 0x3);
/* 13. Load the new UART mode */
- writew(0x0, &uart->mdr1);
+ write16(&uart->mdr1, 0x0);
}
/*
@@ -145,7 +145,7 @@ static void am335x_uart_tx_byte(struct am335x_uart *uart, unsigned char data)
{
while (!(read16(&uart->lsr) & LSR_TXFIFOE));
- return writeb(data, &uart->thr);
+ return write8(&uart->thr, data);
}
unsigned int uart_platform_refclk(void)
diff --git a/src/drivers/gic/gic.c b/src/drivers/gic/gic.c
index 228ca124ec..8972d04617 100644
--- a/src/drivers/gic/gic.c
+++ b/src/drivers/gic/gic.c
@@ -61,7 +61,7 @@ static struct gic *gic_get(void)
static inline void gic_write(uint32_t *base, uint32_t val)
{
- writel(val, base);
+ write32(base, val);
}
static void gic_write_regs(uint32_t *base, size_t num_regs, uint32_t val)
diff --git a/src/drivers/pc80/tpm/tpm.c b/src/drivers/pc80/tpm/tpm.c
index 68758aa7eb..012f61dbed 100644
--- a/src/drivers/pc80/tpm/tpm.c
+++ b/src/drivers/pc80/tpm/tpm.c
@@ -160,7 +160,7 @@ static u32 vendor_dev_id CAR_GLOBAL;
static inline u8 tpm_read_status(int locality)
{
- u8 value = readb(TIS_REG(locality, TIS_REG_STS));
+ u8 value = read8(TIS_REG(locality, TIS_REG_STS));
TPM_DEBUG_IO_READ(TIS_REG_STS, value);
return value;
}
@@ -168,12 +168,12 @@ static inline u8 tpm_read_status(int locality)
static inline void tpm_write_status(u8 sts, int locality)
{
TPM_DEBUG_IO_WRITE(TIS_REG_STS, sts);
- writeb(sts, TIS_REG(locality, TIS_REG_STS));
+ write8(TIS_REG(locality, TIS_REG_STS), sts);
}
static inline u8 tpm_read_data(int locality)
{
- u8 value = readb(TIS_REG(locality, TIS_REG_DATA_FIFO));
+ u8 value = read8(TIS_REG(locality, TIS_REG_DATA_FIFO));
TPM_DEBUG_IO_READ(TIS_REG_DATA_FIFO, value);
return value;
}
@@ -181,21 +181,21 @@ static inline u8 tpm_read_data(int locality)
static inline void tpm_write_data(u8 data, int locality)
{
TPM_DEBUG_IO_WRITE(TIS_REG_STS, data);
- writeb(data, TIS_REG(locality, TIS_REG_DATA_FIFO));
+ write8(TIS_REG(locality, TIS_REG_DATA_FIFO), data);
}
static inline u16 tpm_read_burst_count(int locality)
{
u16 count;
- count = readb(TIS_REG(locality, TIS_REG_BURST_COUNT));
- count |= readb(TIS_REG(locality, TIS_REG_BURST_COUNT + 1)) << 8;
+ count = read8(TIS_REG(locality, TIS_REG_BURST_COUNT));
+ count |= read8(TIS_REG(locality, TIS_REG_BURST_COUNT + 1)) << 8;
TPM_DEBUG_IO_READ(TIS_REG_BURST_COUNT, count);
return count;
}
static inline u8 tpm_read_access(int locality)
{
- u8 value = readb(TIS_REG(locality, TIS_REG_ACCESS));
+ u8 value = read8(TIS_REG(locality, TIS_REG_ACCESS));
TPM_DEBUG_IO_READ(TIS_REG_ACCESS, value);
return value;
}
@@ -203,12 +203,12 @@ static inline u8 tpm_read_access(int locality)
static inline void tpm_write_access(u8 data, int locality)
{
TPM_DEBUG_IO_WRITE(TIS_REG_ACCESS, data);
- writeb(data, TIS_REG(locality, TIS_REG_ACCESS));
+ write8(TIS_REG(locality, TIS_REG_ACCESS), data);
}
static inline u32 tpm_read_did_vid(int locality)
{
- u32 value = readl(TIS_REG(locality, TIS_REG_DID_VID));
+ u32 value = read32(TIS_REG(locality, TIS_REG_DID_VID));
TPM_DEBUG_IO_READ(TIS_REG_DID_VID, value);
return value;
}
@@ -216,7 +216,7 @@ static inline u32 tpm_read_did_vid(int locality)
static inline void tpm_write_int_vector(int vector, int locality)
{
TPM_DEBUG_IO_WRITE(TIS_REG_INT_VECTOR, vector);
- writeb(vector & 0xf, TIS_REG(locality, TIS_REG_INT_VECTOR));
+ write8(TIS_REG(locality, TIS_REG_INT_VECTOR), vector & 0xf);
}
static inline void tpm_write_int_polarity(int polarity, int locality)
@@ -224,7 +224,7 @@ static inline void tpm_write_int_polarity(int polarity, int locality)
/* Set polarity and leave all other bits at 0 */
u32 value = (polarity & 0x3) << 3;
TPM_DEBUG_IO_WRITE(TIS_REG_INT_ENABLE, value);
- writel(value, TIS_REG(locality, TIS_REG_INT_ENABLE));
+ write32(TIS_REG(locality, TIS_REG_INT_ENABLE), value);
}
/*
diff --git a/src/drivers/xgi/common/vb_init.c b/src/drivers/xgi/common/vb_init.c
index a2fbc805b2..4a4d50d055 100644
--- a/src/drivers/xgi/common/vb_init.c
+++ b/src/drivers/xgi/common/vb_init.c
@@ -568,23 +568,23 @@ static int XGINew_ReadWriteRest(unsigned short StopAddr,
unsigned long Position = 0;
void __iomem *fbaddr = pVBInfo->FBAddr;
- writel(Position, fbaddr + Position);
+ write32(fbaddr + Position, Position);
for (i = StartAddr; i <= StopAddr; i++) {
Position = 1 << i;
- writel(Position, fbaddr + Position);
+ write32(fbaddr + Position, Position);
}
udelay(500); /* Fix #1759 Memory Size error in Multi-Adapter. */
Position = 0;
- if (readl(fbaddr + Position) != Position)
+ if (read32(fbaddr + Position) != Position)
return 0;
for (i = StartAddr; i <= StopAddr; i++) {
Position = 1 << i;
- if (readl(fbaddr + Position) != Position)
+ if (read32(fbaddr + Position) != Position)
return 0;
}
return 1;
diff --git a/src/mainboard/cubietech/cubieboard/bootblock.c b/src/mainboard/cubietech/cubieboard/bootblock.c
index 79d00189e8..e4a0313bd4 100644
--- a/src/mainboard/cubietech/cubieboard/bootblock.c
+++ b/src/mainboard/cubietech/cubieboard/bootblock.c
@@ -38,12 +38,12 @@ static void cubieboard_set_sys_clock(void)
struct a10_ccm *ccm = (void *)A1X_CCM_BASE;
/* Switch CPU clock to main oscillator */
- writel(CPU_AHB_APB0_DEFAULT, &ccm->cpu_ahb_apb0_cfg);
+ write32(&ccm->cpu_ahb_apb0_cfg, CPU_AHB_APB0_DEFAULT);
/* Configure the PLL1. The value is the same one used by u-boot
* P = 1, N = 16, K = 1, M = 1 --> Output = 384 MHz
*/
- writel(0xa1005000, &ccm->pll1_cfg);
+ write32(&ccm->pll1_cfg, 0xa1005000);
/* FIXME: Delay to wait for PLL to lock */
u32 wait = 1000;
@@ -53,7 +53,7 @@ static void cubieboard_set_sys_clock(void)
reg32 = read32(&ccm->cpu_ahb_apb0_cfg);
reg32 &= ~CPU_CLK_SRC_MASK;
reg32 |= CPU_CLK_SRC_PLL1;
- writel(reg32, &ccm->cpu_ahb_apb0_cfg);
+ write32(&ccm->cpu_ahb_apb0_cfg, reg32);
}
static void cubieboard_setup_clocks(void)
@@ -62,12 +62,12 @@ static void cubieboard_setup_clocks(void)
cubieboard_set_sys_clock();
/* Configure the clock source for APB1. This drives our UART */
- writel(APB1_CLK_SRC_OSC24M | APB1_RAT_N(0) | APB1_RAT_M(0),
- &ccm->apb1_clk_div_cfg);
+ write32(&ccm->apb1_clk_div_cfg,
+ APB1_CLK_SRC_OSC24M | APB1_RAT_N(0) | APB1_RAT_M(0));
/* Configure the clock for SD0 */
- writel(SDx_CLK_GATE | SDx_CLK_SRC_OSC24M | SDx_RAT_EXP_N(0) | SDx_RAT_M(1),
- &ccm->sd0_clk_cfg);
+ write32(&ccm->sd0_clk_cfg,
+ SDx_CLK_GATE | SDx_CLK_SRC_OSC24M | SDx_RAT_EXP_N(0) | SDx_RAT_M(1));
/* Enable clock to SD0 */
a1x_periph_clock_enable(A1X_CLKEN_MMC0);
diff --git a/src/mainboard/google/nyan/bootblock.c b/src/mainboard/google/nyan/bootblock.c
index bc3cd3efa2..9e26e296f3 100644
--- a/src/mainboard/google/nyan/bootblock.c
+++ b/src/mainboard/google/nyan/bootblock.c
@@ -36,7 +36,7 @@ static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE;
static void set_clock_sources(void)
{
/* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */
- writel(PLLP << CLK_SOURCE_SHIFT, &clk_rst->clk_src_uarta);
+ write32(&clk_rst->clk_src_uarta, PLLP << CLK_SOURCE_SHIFT);
clock_configure_source(mselect, PLLP, 102000);
diff --git a/src/mainboard/google/nyan/mainboard.c b/src/mainboard/google/nyan/mainboard.c
index dce4cbcbd5..97ae227c2d 100644
--- a/src/mainboard/google/nyan/mainboard.c
+++ b/src/mainboard/google/nyan/mainboard.c
@@ -184,13 +184,13 @@ static void setup_kernel_info(void)
// from CONFIG_CONSOLE_SERIAL_UART[A-E]. Right now we simply copy the
// value defined in BCT.
struct tegra_pmc_regs *pmc = (void*)TEGRA_PMC_BASE;
- writel(0x80080000, &pmc->odmdata);
+ write32(&pmc->odmdata, 0x80080000);
// Not strictly info, but kernel graphics driver needs this region locked down
struct tegra_mc_regs *mc = (void *)TEGRA_MC_BASE;
- writel(0, &mc->video_protect_bom);
- writel(0, &mc->video_protect_size_mb);
- writel(1, &mc->video_protect_reg_ctrl);
+ write32(&mc->video_protect_bom, 0);
+ write32(&mc->video_protect_size_mb, 0);
+ write32(&mc->video_protect_reg_ctrl, 1);
}
static void setup_ec_spi(void)
diff --git a/src/mainboard/google/nyan_big/bootblock.c b/src/mainboard/google/nyan_big/bootblock.c
index c471cb841a..94943974d1 100644
--- a/src/mainboard/google/nyan_big/bootblock.c
+++ b/src/mainboard/google/nyan_big/bootblock.c
@@ -36,7 +36,7 @@ static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE;
static void set_clock_sources(void)
{
/* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */
- writel(PLLP << CLK_SOURCE_SHIFT, &clk_rst->clk_src_uarta);
+ write32(&clk_rst->clk_src_uarta, PLLP << CLK_SOURCE_SHIFT);
clock_configure_source(mselect, PLLP, 102000);
diff --git a/src/mainboard/google/nyan_big/mainboard.c b/src/mainboard/google/nyan_big/mainboard.c
index 712269a708..f899dab3fb 100644
--- a/src/mainboard/google/nyan_big/mainboard.c
+++ b/src/mainboard/google/nyan_big/mainboard.c
@@ -184,13 +184,13 @@ static void setup_kernel_info(void)
// from CONFIG_CONSOLE_SERIAL_UART[A-E]. Right now we simply copy the
// value defined in BCT.
struct tegra_pmc_regs *pmc = (void*)TEGRA_PMC_BASE;
- writel(0x80080000, &pmc->odmdata);
+ write32(&pmc->odmdata, 0x80080000);
// Not strictly info, but kernel graphics driver needs this region locked down
struct tegra_mc_regs *mc = (void *)TEGRA_MC_BASE;
- writel(0, &mc->video_protect_bom);
- writel(0, &mc->video_protect_size_mb);
- writel(1, &mc->video_protect_reg_ctrl);
+ write32(&mc->video_protect_bom, 0);
+ write32(&mc->video_protect_size_mb, 0);
+ write32(&mc->video_protect_reg_ctrl, 1);
}
static void setup_ec_spi(void)
diff --git a/src/mainboard/google/nyan_blaze/bootblock.c b/src/mainboard/google/nyan_blaze/bootblock.c
index c471cb841a..94943974d1 100644
--- a/src/mainboard/google/nyan_blaze/bootblock.c
+++ b/src/mainboard/google/nyan_blaze/bootblock.c
@@ -36,7 +36,7 @@ static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE;
static void set_clock_sources(void)
{
/* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */
- writel(PLLP << CLK_SOURCE_SHIFT, &clk_rst->clk_src_uarta);
+ write32(&clk_rst->clk_src_uarta, PLLP << CLK_SOURCE_SHIFT);
clock_configure_source(mselect, PLLP, 102000);
diff --git a/src/mainboard/google/nyan_blaze/mainboard.c b/src/mainboard/google/nyan_blaze/mainboard.c
index 9daa2bb6b3..f5aa1393f1 100644
--- a/src/mainboard/google/nyan_blaze/mainboard.c
+++ b/src/mainboard/google/nyan_blaze/mainboard.c
@@ -184,13 +184,13 @@ static void setup_kernel_info(void)
// from CONFIG_CONSOLE_SERIAL_UART[A-E]. Right now we simply copy the
// value defined in BCT.
struct tegra_pmc_regs *pmc = (void*)TEGRA_PMC_BASE;
- writel(0x80080000, &pmc->odmdata);
+ write32(&pmc->odmdata, 0x80080000);
// Not strictly info, but kernel graphics driver needs this region locked down
struct tegra_mc_regs *mc = (void *)TEGRA_MC_BASE;
- writel(0, &mc->video_protect_bom);
- writel(0, &mc->video_protect_size_mb);
- writel(1, &mc->video_protect_reg_ctrl);
+ write32(&mc->video_protect_bom, 0);
+ write32(&mc->video_protect_size_mb, 0);
+ write32(&mc->video_protect_reg_ctrl, 1);
}
static void setup_ec_spi(void)
diff --git a/src/mainboard/google/peach_pit/mainboard.c b/src/mainboard/google/peach_pit/mainboard.c
index fb37cde6d4..ff2ef86056 100644
--- a/src/mainboard/google/peach_pit/mainboard.c
+++ b/src/mainboard/google/peach_pit/mainboard.c
@@ -429,8 +429,8 @@ static void mainboard_init(device_t dev)
* been found to come up as 3. This means FIMD SYSMMU is on by
* default on Exynos5420. For now we are disabling FIMD SYSMMU.
*/
- writel(0x0, (void *)0x14640000);
- writel(0x0, (void *)0x14680000);
+ write32((void *)0x14640000, 0x0);
+ write32((void *)0x14680000, 0x0);
lcd_vdd();
diff --git a/src/mainboard/google/rush/bootblock.c b/src/mainboard/google/rush/bootblock.c
index 2d099fb6c3..13d1f6726e 100644
--- a/src/mainboard/google/rush/bootblock.c
+++ b/src/mainboard/google/rush/bootblock.c
@@ -85,7 +85,7 @@ void bootblock_mainboard_early_init(void)
static void set_clock_sources(void)
{
/* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */
- writel(PLLP << CLK_SOURCE_SHIFT, CLK_RST_REG(clk_src_uarta));
+ write32(CLK_RST_REG(clk_src_uarta), PLLP << CLK_SOURCE_SHIFT);
}
void bootblock_mainboard_init(void)
diff --git a/src/mainboard/google/rush_ryu/bootblock.c b/src/mainboard/google/rush_ryu/bootblock.c
index 2272ce1370..232baafbc9 100644
--- a/src/mainboard/google/rush_ryu/bootblock.c
+++ b/src/mainboard/google/rush_ryu/bootblock.c
@@ -71,7 +71,7 @@ void bootblock_mainboard_early_init(void)
static void set_clock_sources(void)
{
/* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */
- writel(PLLP << CLK_SOURCE_SHIFT, CLK_RST_REG(clk_src_uarta));
+ write32(CLK_RST_REG(clk_src_uarta), PLLP << CLK_SOURCE_SHIFT);
}
static const struct pad_config padcfgs[] = {
diff --git a/src/mainboard/google/storm/reset.c b/src/mainboard/google/storm/reset.c
index 58c52f91d9..0bac9cc7dc 100644
--- a/src/mainboard/google/storm/reset.c
+++ b/src/mainboard/google/storm/reset.c
@@ -35,12 +35,12 @@ static void wdog_reset(void)
{
printk(BIOS_DEBUG, "\nResetting with watchdog!\n");
- writel(0, APCS_WDT0_EN);
- writel(1, APCS_WDT0_RST);
- writel(RESET_WDT_BARK_TIME, APCS_WDT0_BARK_TIME);
- writel(RESET_WDT_BITE_TIME, APCS_WDT0_BITE_TIME);
- writel(1, APCS_WDT0_EN);
- writel(1, APCS_WDT0_CPU0_WDOG_EXPIRED_ENABLE);
+ write32(APCS_WDT0_EN, 0);
+ write32(APCS_WDT0_RST, 1);
+ write32(APCS_WDT0_BARK_TIME, RESET_WDT_BARK_TIME);
+ write32(APCS_WDT0_BITE_TIME, RESET_WDT_BITE_TIME);
+ write32(APCS_WDT0_EN, 1);
+ write32(APCS_WDT0_CPU0_WDOG_EXPIRED_ENABLE, 1);
for (;;)
;
diff --git a/src/mainboard/google/veyron_brain/bootblock.c b/src/mainboard/google/veyron_brain/bootblock.c
index 68234c9609..678059f954 100644
--- a/src/mainboard/google/veyron_brain/bootblock.c
+++ b/src/mainboard/google/veyron_brain/bootblock.c
@@ -38,7 +38,7 @@ void bootblock_mainboard_early_init()
{
if (IS_ENABLED(CONFIG_DRIVERS_UART)) {
assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE);
- writel(IOMUX_UART2, &rk3288_grf->iomux_uart2);
+ write32(&rk3288_grf->iomux_uart2, IOMUX_UART2);
}
}
@@ -64,12 +64,12 @@ void bootblock_mainboard_init(void)
rkclk_configure_cpu();
/* i2c1 for tpm */
- writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1);
+ write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);
i2c_init(1, 400*KHz);
/* spi2 for firmware ROM */
- writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk);
- writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx);
+ write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK);
+ write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX);
rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz);
setup_chromeos_gpios();
diff --git a/src/mainboard/google/veyron_brain/mainboard.c b/src/mainboard/google/veyron_brain/mainboard.c
index 8e2bbb61e3..45873b68b3 100644
--- a/src/mainboard/google/veyron_brain/mainboard.c
+++ b/src/mainboard/google/veyron_brain/mainboard.c
@@ -50,34 +50,34 @@ static void configure_usb(void)
static void configure_emmc(void)
{
- writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata);
- writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren);
- writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd);
+ write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA);
+ write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN);
+ write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD);
gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */
}
static void configure_codec(void)
{
- writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */
+ write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */
i2c_init(2, 400*KHz); /* CODEC I2C */
- writel(IOMUX_I2S, &rk3288_grf->iomux_i2s);
- writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk);
+ write32(&rk3288_grf->iomux_i2s, IOMUX_I2S);
+ write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK);
rk808_configure_ldo(6, 1800); /* VCC18_CODEC */
/* AUDIO IO domain 1.8V voltage selection */
- writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6));
rkclk_configure_i2s(12288000);
}
static void configure_vop(void)
{
- writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc);
+ write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC);
/* lcdc(vop) iodomain select 1.8V */
- writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0));
rk808_configure_switch(2, 1); /* VCC18_LCD (HDMI_AVDD_1V8) */
rk808_configure_ldo(7, 1000); /* VDD10_LCD (HDMI_AVDD_1V0) */
diff --git a/src/mainboard/google/veyron_brain/romstage.c b/src/mainboard/google/veyron_brain/romstage.c
index 37efcaac6b..4156401cc0 100644
--- a/src/mainboard/google/veyron_brain/romstage.c
+++ b/src/mainboard/google/veyron_brain/romstage.c
@@ -48,7 +48,7 @@ static void regulate_vdd_log(unsigned int mv)
const u32 max_regulator_mv = 1350; /* 1.35V */
const u32 min_regulator_mv = 870; /* 0.87V */
- writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1);
+ write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1);
assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv));
diff --git a/src/mainboard/google/veyron_danger/bootblock.c b/src/mainboard/google/veyron_danger/bootblock.c
index 68234c9609..678059f954 100644
--- a/src/mainboard/google/veyron_danger/bootblock.c
+++ b/src/mainboard/google/veyron_danger/bootblock.c
@@ -38,7 +38,7 @@ void bootblock_mainboard_early_init()
{
if (IS_ENABLED(CONFIG_DRIVERS_UART)) {
assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE);
- writel(IOMUX_UART2, &rk3288_grf->iomux_uart2);
+ write32(&rk3288_grf->iomux_uart2, IOMUX_UART2);
}
}
@@ -64,12 +64,12 @@ void bootblock_mainboard_init(void)
rkclk_configure_cpu();
/* i2c1 for tpm */
- writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1);
+ write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);
i2c_init(1, 400*KHz);
/* spi2 for firmware ROM */
- writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk);
- writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx);
+ write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK);
+ write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX);
rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz);
setup_chromeos_gpios();
diff --git a/src/mainboard/google/veyron_danger/mainboard.c b/src/mainboard/google/veyron_danger/mainboard.c
index 8f01783157..b664d55804 100644
--- a/src/mainboard/google/veyron_danger/mainboard.c
+++ b/src/mainboard/google/veyron_danger/mainboard.c
@@ -50,10 +50,10 @@ static void configure_usb(void)
static void configure_sdmmc(void)
{
- writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0);
+ write32(&rk3288_grf->iomux_sdmmc0, IOMUX_SDMMC0);
/* use sdmmc0 io, disable JTAG function */
- writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0);
+ write32(&rk3288_grf->soc_con0, RK_CLRBITS(1 << 12));
/* Note: these power rail definitions are copied in romstage.c */
rk808_configure_ldo(4, 3300); /* VCCIO_SD */
@@ -64,34 +64,34 @@ static void configure_sdmmc(void)
static void configure_emmc(void)
{
- writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata);
- writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren);
- writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd);
+ write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA);
+ write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN);
+ write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD);
gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */
}
static void configure_codec(void)
{
- writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */
+ write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */
i2c_init(2, 400*KHz); /* CODEC I2C */
- writel(IOMUX_I2S, &rk3288_grf->iomux_i2s);
- writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk);
+ write32(&rk3288_grf->iomux_i2s, IOMUX_I2S);
+ write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK);
rk808_configure_ldo(6, 1800); /* VCC18_CODEC */
/* AUDIO IO domain 1.8V voltage selection */
- writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6));
rkclk_configure_i2s(12288000);
}
static void configure_vop(void)
{
- writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc);
+ write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC);
/* lcdc(vop) iodomain select 1.8V */
- writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0));
rk808_configure_switch(2, 1); /* VCC18_LCD (HDMI_AVDD_1V8) */
rk808_configure_ldo(7, 1000); /* VDD10_LCD (HDMI_AVDD_1V0) */
diff --git a/src/mainboard/google/veyron_danger/romstage.c b/src/mainboard/google/veyron_danger/romstage.c
index f3883bd28f..9be13fe894 100644
--- a/src/mainboard/google/veyron_danger/romstage.c
+++ b/src/mainboard/google/veyron_danger/romstage.c
@@ -49,7 +49,7 @@ static void regulate_vdd_log(unsigned int mv)
const u32 max_regulator_mv = 1350; /* 1.35V */
const u32 min_regulator_mv = 870; /* 0.87V */
- writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1);
+ write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1);
assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv));
diff --git a/src/mainboard/google/veyron_jerry/bootblock.c b/src/mainboard/google/veyron_jerry/bootblock.c
index 19c2aec0db..985152bebc 100644
--- a/src/mainboard/google/veyron_jerry/bootblock.c
+++ b/src/mainboard/google/veyron_jerry/bootblock.c
@@ -38,7 +38,7 @@ void bootblock_mainboard_early_init()
{
if (IS_ENABLED(CONFIG_DRIVERS_UART)) {
assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE);
- writel(IOMUX_UART2, &rk3288_grf->iomux_uart2);
+ write32(&rk3288_grf->iomux_uart2, IOMUX_UART2);
}
}
@@ -62,16 +62,16 @@ void bootblock_mainboard_init(void)
rkclk_configure_cpu();
/* i2c1 for tpm */
- writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1);
+ write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);
i2c_init(1, 400*KHz);
/* spi2 for firmware ROM */
- writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk);
- writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx);
+ write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK);
+ write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX);
rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz);
/* spi0 for chrome ec */
- writel(IOMUX_SPI0, &rk3288_grf->iomux_spi0);
+ write32(&rk3288_grf->iomux_spi0, IOMUX_SPI0);
rockchip_spi_init(CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS, 9*MHz);
setup_chromeos_gpios();
diff --git a/src/mainboard/google/veyron_jerry/mainboard.c b/src/mainboard/google/veyron_jerry/mainboard.c
index 1fc823c5fe..6fb3a8f6ea 100644
--- a/src/mainboard/google/veyron_jerry/mainboard.c
+++ b/src/mainboard/google/veyron_jerry/mainboard.c
@@ -50,10 +50,10 @@ static void configure_usb(void)
static void configure_sdmmc(void)
{
- writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0);
+ write32(&rk3288_grf->iomux_sdmmc0, IOMUX_SDMMC0);
/* use sdmmc0 io, disable JTAG function */
- writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0);
+ write32(&rk3288_grf->soc_con0, RK_CLRBITS(1 << 12));
/* Note: these power rail definitions are copied in romstage.c */
rk808_configure_ldo(4, 3300); /* VCCIO_SD */
@@ -64,34 +64,34 @@ static void configure_sdmmc(void)
static void configure_emmc(void)
{
- writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata);
- writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren);
- writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd);
+ write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA);
+ write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN);
+ write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD);
gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */
}
static void configure_codec(void)
{
- writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */
+ write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */
i2c_init(2, 400*KHz); /* CODEC I2C */
- writel(IOMUX_I2S, &rk3288_grf->iomux_i2s);
- writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk);
+ write32(&rk3288_grf->iomux_i2s, IOMUX_I2S);
+ write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK);
rk808_configure_ldo(6, 1800); /* VCC18_CODEC */
/* AUDIO IO domain 1.8V voltage selection */
- writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6));
rkclk_configure_i2s(12288000);
}
static void configure_vop(void)
{
- writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc);
+ write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC);
/* lcdc(vop) iodomain select 1.8V */
- writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0));
switch (board_id()) {
case 2:
@@ -107,7 +107,7 @@ static void configure_vop(void)
/* enable edp HPD */
gpio_input_pulldown(GPIO(7, B, 3));
- writel(IOMUX_EDP_HOTPLUG, &rk3288_grf->iomux_edp_hotplug);
+ write32(&rk3288_grf->iomux_edp_hotplug, IOMUX_EDP_HOTPLUG);
break;
}
}
diff --git a/src/mainboard/google/veyron_jerry/romstage.c b/src/mainboard/google/veyron_jerry/romstage.c
index 9d19586cd5..e8f54deedd 100644
--- a/src/mainboard/google/veyron_jerry/romstage.c
+++ b/src/mainboard/google/veyron_jerry/romstage.c
@@ -48,7 +48,7 @@ static void regulate_vdd_log(unsigned int mv)
const u32 max_regulator_mv = 1350; /* 1.35V */
const u32 min_regulator_mv = 870; /* 0.87V */
- writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1);
+ write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1);
assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv));
diff --git a/src/mainboard/google/veyron_mighty/bootblock.c b/src/mainboard/google/veyron_mighty/bootblock.c
index 19c2aec0db..985152bebc 100644
--- a/src/mainboard/google/veyron_mighty/bootblock.c
+++ b/src/mainboard/google/veyron_mighty/bootblock.c
@@ -38,7 +38,7 @@ void bootblock_mainboard_early_init()
{
if (IS_ENABLED(CONFIG_DRIVERS_UART)) {
assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE);
- writel(IOMUX_UART2, &rk3288_grf->iomux_uart2);
+ write32(&rk3288_grf->iomux_uart2, IOMUX_UART2);
}
}
@@ -62,16 +62,16 @@ void bootblock_mainboard_init(void)
rkclk_configure_cpu();
/* i2c1 for tpm */
- writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1);
+ write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);
i2c_init(1, 400*KHz);
/* spi2 for firmware ROM */
- writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk);
- writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx);
+ write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK);
+ write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX);
rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz);
/* spi0 for chrome ec */
- writel(IOMUX_SPI0, &rk3288_grf->iomux_spi0);
+ write32(&rk3288_grf->iomux_spi0, IOMUX_SPI0);
rockchip_spi_init(CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS, 9*MHz);
setup_chromeos_gpios();
diff --git a/src/mainboard/google/veyron_mighty/mainboard.c b/src/mainboard/google/veyron_mighty/mainboard.c
index fb1d8fa69e..5c417544ea 100644
--- a/src/mainboard/google/veyron_mighty/mainboard.c
+++ b/src/mainboard/google/veyron_mighty/mainboard.c
@@ -50,10 +50,10 @@ static void configure_usb(void)
static void configure_sdmmc(void)
{
- writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0);
+ write32(&rk3288_grf->iomux_sdmmc0, IOMUX_SDMMC0);
/* use sdmmc0 io, disable JTAG function */
- writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0);
+ write32(&rk3288_grf->soc_con0, RK_CLRBITS(1 << 12));
/* Note: these power rail definitions are copied in romstage.c */
rk808_configure_ldo(4, 3300); /* VCCIO_SD */
@@ -64,34 +64,34 @@ static void configure_sdmmc(void)
static void configure_emmc(void)
{
- writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata);
- writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren);
- writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd);
+ write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA);
+ write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN);
+ write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD);
gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */
}
static void configure_codec(void)
{
- writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */
+ write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */
i2c_init(2, 400*KHz); /* CODEC I2C */
- writel(IOMUX_I2S, &rk3288_grf->iomux_i2s);
- writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk);
+ write32(&rk3288_grf->iomux_i2s, IOMUX_I2S);
+ write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK);
rk808_configure_ldo(6, 1800); /* VCC18_CODEC */
/* AUDIO IO domain 1.8V voltage selection */
- writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6));
rkclk_configure_i2s(12288000);
}
static void configure_vop(void)
{
- writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc);
+ write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC);
/* lcdc(vop) iodomain select 1.8V */
- writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0));
switch (board_id()) {
case 0:
@@ -107,7 +107,7 @@ static void configure_vop(void)
/* enable edp HPD */
gpio_input_pulldown(GPIO(7, B, 3));
- writel(IOMUX_EDP_HOTPLUG, &rk3288_grf->iomux_edp_hotplug);
+ write32(&rk3288_grf->iomux_edp_hotplug, IOMUX_EDP_HOTPLUG);
break;
}
}
diff --git a/src/mainboard/google/veyron_mighty/romstage.c b/src/mainboard/google/veyron_mighty/romstage.c
index 9d19586cd5..e8f54deedd 100644
--- a/src/mainboard/google/veyron_mighty/romstage.c
+++ b/src/mainboard/google/veyron_mighty/romstage.c
@@ -48,7 +48,7 @@ static void regulate_vdd_log(unsigned int mv)
const u32 max_regulator_mv = 1350; /* 1.35V */
const u32 min_regulator_mv = 870; /* 0.87V */
- writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1);
+ write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1);
assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv));
diff --git a/src/mainboard/google/veyron_pinky/bootblock.c b/src/mainboard/google/veyron_pinky/bootblock.c
index 19c2aec0db..985152bebc 100644
--- a/src/mainboard/google/veyron_pinky/bootblock.c
+++ b/src/mainboard/google/veyron_pinky/bootblock.c
@@ -38,7 +38,7 @@ void bootblock_mainboard_early_init()
{
if (IS_ENABLED(CONFIG_DRIVERS_UART)) {
assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE);
- writel(IOMUX_UART2, &rk3288_grf->iomux_uart2);
+ write32(&rk3288_grf->iomux_uart2, IOMUX_UART2);
}
}
@@ -62,16 +62,16 @@ void bootblock_mainboard_init(void)
rkclk_configure_cpu();
/* i2c1 for tpm */
- writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1);
+ write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);
i2c_init(1, 400*KHz);
/* spi2 for firmware ROM */
- writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk);
- writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx);
+ write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK);
+ write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX);
rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz);
/* spi0 for chrome ec */
- writel(IOMUX_SPI0, &rk3288_grf->iomux_spi0);
+ write32(&rk3288_grf->iomux_spi0, IOMUX_SPI0);
rockchip_spi_init(CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS, 9*MHz);
setup_chromeos_gpios();
diff --git a/src/mainboard/google/veyron_pinky/mainboard.c b/src/mainboard/google/veyron_pinky/mainboard.c
index e3e5b290a9..ef14c2d6b1 100644
--- a/src/mainboard/google/veyron_pinky/mainboard.c
+++ b/src/mainboard/google/veyron_pinky/mainboard.c
@@ -60,10 +60,10 @@ static void configure_usb(void)
static void configure_sdmmc(void)
{
- writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0);
+ write32(&rk3288_grf->iomux_sdmmc0, IOMUX_SDMMC0);
/* use sdmmc0 io, disable JTAG function */
- writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0);
+ write32(&rk3288_grf->soc_con0, RK_CLRBITS(1 << 12));
/* Note: these power rail definitions are copied in romstage.c */
switch (board_id()) {
@@ -82,9 +82,9 @@ static void configure_sdmmc(void)
static void configure_emmc(void)
{
- writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata);
- writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren);
- writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd);
+ write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA);
+ write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN);
+ write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD);
switch (board_id()) {
case 0:
@@ -104,11 +104,11 @@ static void configure_emmc(void)
static void configure_codec(void)
{
- writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */
+ write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */
i2c_init(2, 400*KHz); /* CODEC I2C */
- writel(IOMUX_I2S, &rk3288_grf->iomux_i2s);
- writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk);
+ write32(&rk3288_grf->iomux_i2s, IOMUX_I2S);
+ write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK);
switch (board_id()) {
case 0:
@@ -120,16 +120,16 @@ static void configure_codec(void)
}
/* AUDIO IO domain 1.8V voltage selection */
- writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6));
rkclk_configure_i2s(12288000);
}
static void configure_vop(void)
{
- writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc);
+ write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC);
/* lcdc(vop) iodomain select 1.8V */
- writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0));
switch (board_id()) {
case 0:
@@ -151,7 +151,7 @@ static void configure_vop(void)
/* enable edp HPD */
gpio_input_pulldown(GPIO(7, B, 3));
- writel(IOMUX_EDP_HOTPLUG, &rk3288_grf->iomux_edp_hotplug);
+ write32(&rk3288_grf->iomux_edp_hotplug, IOMUX_EDP_HOTPLUG);
break;
}
}
diff --git a/src/mainboard/google/veyron_pinky/romstage.c b/src/mainboard/google/veyron_pinky/romstage.c
index 74c5ef3585..3e885647c7 100644
--- a/src/mainboard/google/veyron_pinky/romstage.c
+++ b/src/mainboard/google/veyron_pinky/romstage.c
@@ -48,7 +48,7 @@ static void regulate_vdd_log(unsigned int mv)
const u32 max_regulator_mv = 1350; /* 1.35V */
const u32 min_regulator_mv = 870; /* 0.87V */
- writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1);
+ write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1);
assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv));
diff --git a/src/mainboard/google/veyron_rialto/bootblock.c b/src/mainboard/google/veyron_rialto/bootblock.c
index ab9d60dad0..135aece472 100644
--- a/src/mainboard/google/veyron_rialto/bootblock.c
+++ b/src/mainboard/google/veyron_rialto/bootblock.c
@@ -38,7 +38,7 @@ void bootblock_mainboard_early_init()
{
if (IS_ENABLED(CONFIG_DRIVERS_UART)) {
assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE);
- writel(IOMUX_UART2, &rk3288_grf->iomux_uart2);
+ write32(&rk3288_grf->iomux_uart2, IOMUX_UART2);
}
}
@@ -62,12 +62,12 @@ void bootblock_mainboard_init(void)
rkclk_configure_cpu();
/* i2c1 for tpm */
- writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1);
+ write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);
i2c_init(1, 400*KHz);
/* spi2 for firmware ROM */
- writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk);
- writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx);
+ write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK);
+ write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX);
rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz);
setup_chromeos_gpios();
diff --git a/src/mainboard/google/veyron_rialto/mainboard.c b/src/mainboard/google/veyron_rialto/mainboard.c
index d03a917c09..eb6efd3290 100644
--- a/src/mainboard/google/veyron_rialto/mainboard.c
+++ b/src/mainboard/google/veyron_rialto/mainboard.c
@@ -50,25 +50,25 @@ static void configure_usb(void)
static void configure_emmc(void)
{
- writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata);
- writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren);
- writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd);
+ write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA);
+ write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN);
+ write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD);
gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */
}
static void configure_codec(void)
{
- writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */
+ write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */
i2c_init(2, 400*KHz); /* CODEC I2C */
- writel(IOMUX_I2S, &rk3288_grf->iomux_i2s);
- writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk);
+ write32(&rk3288_grf->iomux_i2s, IOMUX_I2S);
+ write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK);
rk808_configure_ldo(6, 1800); /* VCC18_CODEC */
/* AUDIO IO domain 1.8V voltage selection */
- writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6));
rkclk_configure_i2s(12288000);
}
diff --git a/src/mainboard/google/veyron_rialto/romstage.c b/src/mainboard/google/veyron_rialto/romstage.c
index f3883bd28f..9be13fe894 100644
--- a/src/mainboard/google/veyron_rialto/romstage.c
+++ b/src/mainboard/google/veyron_rialto/romstage.c
@@ -49,7 +49,7 @@ static void regulate_vdd_log(unsigned int mv)
const u32 max_regulator_mv = 1350; /* 1.35V */
const u32 min_regulator_mv = 870; /* 0.87V */
- writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1);
+ write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1);
assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv));
diff --git a/src/mainboard/google/veyron_speedy/bootblock.c b/src/mainboard/google/veyron_speedy/bootblock.c
index 19c2aec0db..985152bebc 100644
--- a/src/mainboard/google/veyron_speedy/bootblock.c
+++ b/src/mainboard/google/veyron_speedy/bootblock.c
@@ -38,7 +38,7 @@ void bootblock_mainboard_early_init()
{
if (IS_ENABLED(CONFIG_DRIVERS_UART)) {
assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE);
- writel(IOMUX_UART2, &rk3288_grf->iomux_uart2);
+ write32(&rk3288_grf->iomux_uart2, IOMUX_UART2);
}
}
@@ -62,16 +62,16 @@ void bootblock_mainboard_init(void)
rkclk_configure_cpu();
/* i2c1 for tpm */
- writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1);
+ write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);
i2c_init(1, 400*KHz);
/* spi2 for firmware ROM */
- writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk);
- writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx);
+ write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK);
+ write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX);
rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz);
/* spi0 for chrome ec */
- writel(IOMUX_SPI0, &rk3288_grf->iomux_spi0);
+ write32(&rk3288_grf->iomux_spi0, IOMUX_SPI0);
rockchip_spi_init(CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS, 9*MHz);
setup_chromeos_gpios();
diff --git a/src/mainboard/google/veyron_speedy/mainboard.c b/src/mainboard/google/veyron_speedy/mainboard.c
index fb1d8fa69e..5c417544ea 100644
--- a/src/mainboard/google/veyron_speedy/mainboard.c
+++ b/src/mainboard/google/veyron_speedy/mainboard.c
@@ -50,10 +50,10 @@ static void configure_usb(void)
static void configure_sdmmc(void)
{
- writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0);
+ write32(&rk3288_grf->iomux_sdmmc0, IOMUX_SDMMC0);
/* use sdmmc0 io, disable JTAG function */
- writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0);
+ write32(&rk3288_grf->soc_con0, RK_CLRBITS(1 << 12));
/* Note: these power rail definitions are copied in romstage.c */
rk808_configure_ldo(4, 3300); /* VCCIO_SD */
@@ -64,34 +64,34 @@ static void configure_sdmmc(void)
static void configure_emmc(void)
{
- writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata);
- writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren);
- writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd);
+ write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA);
+ write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN);
+ write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD);
gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */
}
static void configure_codec(void)
{
- writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */
+ write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */
i2c_init(2, 400*KHz); /* CODEC I2C */
- writel(IOMUX_I2S, &rk3288_grf->iomux_i2s);
- writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk);
+ write32(&rk3288_grf->iomux_i2s, IOMUX_I2S);
+ write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK);
rk808_configure_ldo(6, 1800); /* VCC18_CODEC */
/* AUDIO IO domain 1.8V voltage selection */
- writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6));
rkclk_configure_i2s(12288000);
}
static void configure_vop(void)
{
- writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc);
+ write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC);
/* lcdc(vop) iodomain select 1.8V */
- writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel);
+ write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0));
switch (board_id()) {
case 0:
@@ -107,7 +107,7 @@ static void configure_vop(void)
/* enable edp HPD */
gpio_input_pulldown(GPIO(7, B, 3));
- writel(IOMUX_EDP_HOTPLUG, &rk3288_grf->iomux_edp_hotplug);
+ write32(&rk3288_grf->iomux_edp_hotplug, IOMUX_EDP_HOTPLUG);
break;
}
}
diff --git a/src/mainboard/google/veyron_speedy/romstage.c b/src/mainboard/google/veyron_speedy/romstage.c
index f3883bd28f..9be13fe894 100644
--- a/src/mainboard/google/veyron_speedy/romstage.c
+++ b/src/mainboard/google/veyron_speedy/romstage.c
@@ -49,7 +49,7 @@ static void regulate_vdd_log(unsigned int mv)
const u32 max_regulator_mv = 1350; /* 1.35V */
const u32 min_regulator_mv = 870; /* 0.87V */
- writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1);
+ write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1);
assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv));
diff --git a/src/mainboard/ti/beaglebone/bootblock.c b/src/mainboard/ti/beaglebone/bootblock.c
index 2b22227fb2..3144eddb27 100644
--- a/src/mainboard/ti/beaglebone/bootblock.c
+++ b/src/mainboard/ti/beaglebone/bootblock.c
@@ -29,7 +29,7 @@ void bootblock_mainboard_init(void)
void *uart_clock_ctrl = NULL;
/* Enable the GPIO module */
- writel((0x2 << 0) | (1 << 18), (uint32_t *)(0x44e00000 + 0xac));
+ write32((uint32_t *)(0x44e00000 + 0xac), (0x2 << 0) | (1 << 18));
/* Disable interrupts from these GPIOs */
setbits_le32((uint32_t *)(0x4804c000 + 0x3c), 0xf << 21);
@@ -62,7 +62,7 @@ void bootblock_mainboard_init(void)
uart_clock_ctrl = (void *)(uintptr_t)(0x44e00000 + 0x38);
}
if (uart_clock_ctrl)
- writel(0x2, uart_clock_ctrl);
+ write32(uart_clock_ctrl, 0x2);
/* Start monotonic timer */
//rtc_start();
diff --git a/src/soc/broadcom/cygnus/timer.c b/src/soc/broadcom/cygnus/timer.c
index 5116389778..bde1e3bfc7 100644
--- a/src/soc/broadcom/cygnus/timer.c
+++ b/src/soc/broadcom/cygnus/timer.c
@@ -49,9 +49,9 @@ static inline uint64_t timer_raw_value(void)
uint32_t count_l;
do {
- count_h = readl(&timer_ptr->gtim_glob_hi);
- count_l = readl(&timer_ptr->gtim_glob_low);
- cur_tick = readl(&timer_ptr->gtim_glob_hi);
+ count_h = read32(&timer_ptr->gtim_glob_hi);
+ count_l = read32(&timer_ptr->gtim_glob_low);
+ cur_tick = read32(&timer_ptr->gtim_glob_hi);
} while (cur_tick != count_h);
return (cur_tick << 32) + count_l;
@@ -64,8 +64,8 @@ void timer_monotonic_get(struct mono_time *mt)
void init_timer(void)
{
- writel(TIMER_GLB_TIM_CTRL_PRESC, &timer_ptr->gtim_glob_ctrl);
- writel(0, &timer_ptr->gtim_glob_low);
- writel(0, &timer_ptr->gtim_glob_hi);
- writel(TIMER_GLB_TIM_CTRL_TIM_EN, &timer_ptr->gtim_glob_ctrl);
+ write32(&timer_ptr->gtim_glob_ctrl, TIMER_GLB_TIM_CTRL_PRESC);
+ write32(&timer_ptr->gtim_glob_low, 0);
+ write32(&timer_ptr->gtim_glob_hi, 0);
+ write32(&timer_ptr->gtim_glob_ctrl, TIMER_GLB_TIM_CTRL_TIM_EN);
}
diff --git a/src/soc/nvidia/tegra/apbmisc.c b/src/soc/nvidia/tegra/apbmisc.c
index 292d21d02f..3f7df5bd0e 100644
--- a/src/soc/nvidia/tegra/apbmisc.c
+++ b/src/soc/nvidia/tegra/apbmisc.c
@@ -26,12 +26,12 @@ static struct apbmisc *misc = (struct apbmisc *)TEGRA_APB_MISC_BASE;
void enable_jtag(void)
{
- writel(PP_CONFIG_CTL_JTAG, &misc->pp_config_ctl);
+ write32(&misc->pp_config_ctl, PP_CONFIG_CTL_JTAG);
}
void clamp_tristate_inputs(void)
{
- writel(PP_PINMUX_CLAMP_INPUTS, &misc->pp_pinmux_global);
+ write32(&misc->pp_pinmux_global, PP_PINMUX_CLAMP_INPUTS);
}
void tegra_revision_info(struct tegra_revision *id)
diff --git a/src/soc/nvidia/tegra/gpio.c b/src/soc/nvidia/tegra/gpio.c
index 8179580add..e0561c057d 100644
--- a/src/soc/nvidia/tegra/gpio.c
+++ b/src/soc/nvidia/tegra/gpio.c
@@ -67,8 +67,8 @@ static void gpio_write_port(int index, size_t offset, u32 mask, u32 value)
u32 new_reg = (reg & ~mask) | (value & mask);
if (new_reg != reg) {
- writel(new_reg,
- (u8 *)&gpio_banks[bank] + offset + port * sizeof(u32));
+ write32((u8 *)&gpio_banks[bank] + offset + port * sizeof(u32),
+ new_reg);
}
}
diff --git a/src/soc/nvidia/tegra/i2c.c b/src/soc/nvidia/tegra/i2c.c
index b9a5f42a37..1d5df3c342 100644
--- a/src/soc/nvidia/tegra/i2c.c
+++ b/src/soc/nvidia/tegra/i2c.c
@@ -40,9 +40,9 @@ static void do_bus_clear(int bus)
// 4. Set TERMINATE condition (1 = IMMEDIATE)
bc = read32(&regs->bus_clear_config);
bc |= I2C_BUS_CLEAR_CONFIG_BC_TERMINATE_IMMEDIATE;
- writel(bc, &regs->bus_clear_config);
+ write32(&regs->bus_clear_config, bc);
// 4.1 Set MSTR_CONFIG_LOAD and wait for clear
- writel(I2C_CONFIG_LOAD_MSTR_CONFIG_LOAD_ENABLE, &regs->config_load);
+ write32(&regs->config_load, I2C_CONFIG_LOAD_MSTR_CONFIG_LOAD_ENABLE);
for (i = 0; i < timeout_ms * 10 && (read32(&regs->config_load) &
I2C_CONFIG_LOAD_MSTR_CONFIG_LOAD_ENABLE); i++) {
printk(BIOS_DEBUG, "%s: wait for MSTR_CONFIG_LOAD to clear\n",
@@ -50,7 +50,7 @@ static void do_bus_clear(int bus)
udelay(100);
}
// 5. Set ENABLE to start the bus clear op
- writel(bc | I2C_BUS_CLEAR_CONFIG_BC_ENABLE, &regs->bus_clear_config);
+ write32(&regs->bus_clear_config, bc | I2C_BUS_CLEAR_CONFIG_BC_ENABLE);
for (i = 0; i < timeout_ms * 10 && (read32(&regs->bus_clear_config) &
I2C_BUS_CLEAR_CONFIG_BC_ENABLE); i++) {
printk(BIOS_DEBUG, "%s: wait for bus clear completion\n",
@@ -74,7 +74,7 @@ static int tegra_i2c_send_recv(int bus, int read,
rx_full >>= I2C_FIFO_STATUS_RX_FIFO_FULL_CNT_SHIFT;
while (header_words && tx_empty) {
- writel(*headers++, &regs->tx_packet_fifo);
+ write32(&regs->tx_packet_fifo, *headers++);
header_words--;
tx_empty--;
}
@@ -96,7 +96,7 @@ static int tegra_i2c_send_recv(int bus, int read,
int todo = MIN(data_len, sizeof(word));
memcpy(&word, data, todo);
- writel(word, &regs->tx_packet_fifo);
+ write32(&regs->tx_packet_fifo, word);
data_len -= todo;
data += sizeof(word);
tx_empty--;
@@ -208,5 +208,5 @@ void i2c_init(unsigned bus)
{
struct tegra_i2c_regs * const regs = tegra_i2c_info[bus].base;
- writel(I2C_CNFG_PACKET_MODE_EN, &regs->cnfg);
+ write32(&regs->cnfg, I2C_CNFG_PACKET_MODE_EN);
}
diff --git a/src/soc/nvidia/tegra/pingroup.c b/src/soc/nvidia/tegra/pingroup.c
index c856c173ac..332e05aeaa 100644
--- a/src/soc/nvidia/tegra/pingroup.c
+++ b/src/soc/nvidia/tegra/pingroup.c
@@ -26,7 +26,7 @@ static uint32_t *pingroup_regs = (void *)TEGRA_APB_PINGROUP_BASE;
void pingroup_set_config(int group_index, uint32_t config)
{
- writel(config, &pingroup_regs[group_index]);
+ write32(&pingroup_regs[group_index], config);
}
uint32_t pingroup_get_config(int group_index)
diff --git a/src/soc/nvidia/tegra/pinmux.c b/src/soc/nvidia/tegra/pinmux.c
index a88a063cac..f28b0266e7 100644
--- a/src/soc/nvidia/tegra/pinmux.c
+++ b/src/soc/nvidia/tegra/pinmux.c
@@ -26,7 +26,7 @@ static uint32_t *pinmux_regs = (void *)TEGRA_APB_PINMUX_BASE;
void pinmux_set_config(int pin_index, uint32_t config)
{
- writel(config, &pinmux_regs[pin_index]);
+ write32(&pinmux_regs[pin_index], config);
}
uint32_t pinmux_get_config(int pin_index)
diff --git a/src/soc/nvidia/tegra/usb.c b/src/soc/nvidia/tegra/usb.c
index c666c40f3b..4a069fa02e 100644
--- a/src/soc/nvidia/tegra/usb.c
+++ b/src/soc/nvidia/tegra/usb.c
@@ -126,7 +126,7 @@ static void usb_ehci_reset_and_prepare(struct usb_ctlr *usb, enum usb_phy_type t
{
int timeout = 1000;
- writel(1 << 1, &usb->ehci_usbcmd); /* Host Controller Reset */
+ write32(&usb->ehci_usbcmd, 1 << 1); /* Host Controller Reset */
/* TODO: Resets are long, find way to parallelize... or just use XHCI */
while (--timeout && (read32(&usb->ehci_usbcmd) & 1 << 1))
/* wait for HC to reset */;
@@ -137,11 +137,11 @@ static void usb_ehci_reset_and_prepare(struct usb_ctlr *usb, enum usb_phy_type t
}
/* Controller mode: HOST */
- writel(3 << 0, &usb->usb_mode);
+ write32(&usb->usb_mode, 3 << 0);
/* Parallel transceiver selct */
- writel(type << 29, &usb->lpm_ctrl);
+ write32(&usb->lpm_ctrl, type << 29);
/* Tx FIFO Burst thresh */
- writel(0x10 << 16, &usb->tx_fill_tuning);
+ write32(&usb->tx_fill_tuning, 0x10 << 16);
}
/* Assume USBx clocked, out of reset, UTMI+ PLL set up, SAMP_x out of pwrdn */
@@ -157,27 +157,27 @@ void usb_setup_utmip(void *usb_base)
udelay(1);
/* Take stuff out of pwrdn and add some magic numbers from U-Boot */
- writel(0x8 << 25 | 0x3 << 22 | 0 << 21 | 0 << 18 | 0 << 16 | 0 << 14 | 1 << 13 | 0x1 << 10 | 0x1 << 8 | 0x4 << 0 | 0,
- &usb->utmip.xcvr0);
- writel(0x7 << 18 | 0 << 4 | 0 << 2 | 0 << 0 | 0, &usb->utmip.xcvr1);
- writel(1 << 19 | 1 << 16 | 1 << 9 | 0, &usb->utmip.tx);
- writel(0x2 << 30 | 1 << 28 | 0x1 << 24 | 0x3 << 21 | 0x11 << 15 | 0x10 << 10 | 0,
- &usb->utmip.hsrx0);
+ write32(&usb->utmip.xcvr0,
+ 0x8 << 25 | 0x3 << 22 | 0 << 21 | 0 << 18 | 0 << 16 | 0 << 14 | 1 << 13 | 0x1 << 10 | 0x1 << 8 | 0x4 << 0 | 0);
+ write32(&usb->utmip.xcvr1, 0x7 << 18 | 0 << 4 | 0 << 2 | 0 << 0 | 0);
+ write32(&usb->utmip.tx, 1 << 19 | 1 << 16 | 1 << 9 | 0);
+ write32(&usb->utmip.hsrx0,
+ 0x2 << 30 | 1 << 28 | 0x1 << 24 | 0x3 << 21 | 0x11 << 15 | 0x10 << 10 | 0);
/* U-Boot claims the USBD values for these are used across all UTMI+
* PHYs. That sounds so horribly wrong that I'm not going to implement
* it, but keep it in mind if we're ever not using the USBD port. */
- writel(0x1 << 24 | 1 << 23 | 1 << 22 | 1 << 11 | 0 << 10 | 0x1 << 2 | 0x2 << 0 | 0,
- &usb->utmip.bias0);
+ write32(&usb->utmip.bias0,
+ 0x1 << 24 | 1 << 23 | 1 << 22 | 1 << 11 | 0 << 10 | 0x1 << 2 | 0x2 << 0 | 0);
- writel(khz / 2200 << 3 | 1 << 2 | 0 << 0 | 0, &usb->utmip.bias1);
+ write32(&usb->utmip.bias1, khz / 2200 << 3 | 1 << 2 | 0 << 0 | 0);
- writel(0xffff << 16 | 25 * khz / 10 << 0 | 0, &usb->utmip.debounce);
+ write32(&usb->utmip.debounce, 0xffff << 16 | 25 * khz / 10 << 0 | 0);
udelay(1);
setbits_le32(&usb->utmip.misc1, 1 << 30); /* PHY_XTAL_CLKEN */
- writel(1 << 12 | 0 << 11 | 0, &usb->suspend_ctrl);
+ write32(&usb->suspend_ctrl, 1 << 12 | 0 << 11 | 0);
usb_ehci_reset_and_prepare(usb, USB_PHY_UTMIP);
printk(BIOS_DEBUG, "USB controller @ %p set up with UTMI+ PHY\n",usb_base);
diff --git a/src/soc/nvidia/tegra124/clock.c b/src/soc/nvidia/tegra124/clock.c
index dc1d1dbe8a..1d124b220f 100644
--- a/src/soc/nvidia/tegra124/clock.c
+++ b/src/soc/nvidia/tegra124/clock.c
@@ -163,7 +163,7 @@ struct {
*/
static u32 clock_get_osc_bits(void)
{
- return (readl(&clk_rst->osc_ctrl) & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+ return (read32(&clk_rst->osc_ctrl) & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
}
int clock_get_osc_khz(void)
@@ -173,7 +173,7 @@ int clock_get_osc_khz(void)
int clock_get_pll_input_khz(void)
{
- u32 osc_ctrl = readl(&clk_rst->osc_ctrl);
+ u32 osc_ctrl = read32(&clk_rst->osc_ctrl);
u32 osc_bits = (osc_ctrl & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
u32 pll_ref_div = (osc_ctrl & OSC_PREDIV_MASK) >> OSC_PREDIV_SHIFT;
return osc_table[osc_bits].khz >> pll_ref_div;
@@ -186,11 +186,11 @@ void clock_init_arm_generic_timer(void)
set_cntfrq(freq);
// Record the system timer frequency.
- writel(freq, &sysctr->cntfid0);
+ write32(&sysctr->cntfid0, freq);
// Enable the system counter.
uint32_t cntcr = read32(&sysctr->cntcr);
cntcr |= SYSCTR_CNTCR_EN | SYSCTR_CNTCR_HDBG;
- writel(cntcr, &sysctr->cntcr);
+ write32(&sysctr->cntcr, cntcr);
}
#define SOR0_CLK_SEL0 (1 << 14)
@@ -221,18 +221,18 @@ static void init_pll(u32 *base, u32 *misc, const union pll_fields pll, u32 lock)
pll.div.lfcon << PLL_MISC_LFCON_SHIFT;
/* Write dividers but BYPASS the PLL while we're messing with it. */
- writel(dividers | PLL_BASE_BYPASS, base);
+ write32(base, dividers | PLL_BASE_BYPASS);
/*
* Set Lock bit, CPCON and LFCON fields (default to 0 if it doesn't
* exist for this PLL)
*/
- writel(lock | misc_con, misc);
+ write32(misc, lock | misc_con);
/* Enable PLL and take it back out of BYPASS */
- writel(dividers | PLL_BASE_ENABLE, base);
+ write32(base, dividers | PLL_BASE_ENABLE);
/* Wait for lock ready */
- while (!(readl(base) & PLL_BASE_LOCK));
+ while (!(read32(base) & PLL_BASE_LOCK));
}
static void init_utmip_pll(void)
@@ -243,14 +243,14 @@ static void init_utmip_pll(void)
clrbits_le32(&clk_rst->utmip_pll_cfg2, 1 << 30); /* PHY_XTAL_CLKEN */
udelay(1);
- writel(80 << 16 | 1 << 8 | 0, &clk_rst->utmip_pll_cfg0); /* 960MHz * 1 / 80 == 12 MHz */
+ write32(&clk_rst->utmip_pll_cfg0, 80 << 16 | 1 << 8 | 0); /* 960MHz * 1 / 80 == 12 MHz */
- writel(CEIL_DIV(khz, 8000) << 27 | 0 << 16 | 0 << 14 | 0 << 12 | CEIL_DIV(khz, 102) << 0 | 0,
- &clk_rst->utmip_pll_cfg1);
+ write32(&clk_rst->utmip_pll_cfg1,
+ CEIL_DIV(khz, 8000) << 27 | 0 << 16 | 0 << 14 | 0 << 12 | CEIL_DIV(khz, 102) << 0 | 0);
/* TODO: TRM can't decide if actv is 5us or 10us, keep an eye on it */
- writel(0 << 24 | CEIL_DIV(khz, 3200) << 18 | CEIL_DIV(khz, 256) << 6 | 0 << 4 | 0 << 2 | 0 << 0 | 0,
- &clk_rst->utmip_pll_cfg2);
+ write32(&clk_rst->utmip_pll_cfg2,
+ 0 << 24 | CEIL_DIV(khz, 3200) << 18 | CEIL_DIV(khz, 256) << 6 | 0 << 4 | 0 << 2 | 0 << 0 | 0);
setbits_le32(&clk_rst->utmip_pll_cfg2, 1 << 30); /* PHY_XTAL_CLKEN */
}
@@ -274,12 +274,12 @@ static void graphics_pll(void)
* that it is needed.
*/
u32 scfg = (1<<28) | (1<<24) | (1<<22);
- writel(scfg, cfg);
+ write32(cfg, scfg);
init_pll(&clk_rst->plldp_base, &clk_rst->plldp_misc,
osc_table[osc].plldp, PLLDPD2_MISC_LOCK_ENABLE);
/* leave dither and undoc bits set, release clamp */
scfg = (1<<28) | (1<<24);
- writel(scfg, cfg);
+ write32(cfg, scfg);
/* disp1 will be set when panel information (pixel clock) is
* retrieved (clock_display).
@@ -387,8 +387,8 @@ clock_display(u32 frequency)
* been determined through trial and error (must lead to div 13 at 24MHz). */
void clock_early_uart(void)
{
- writel(CLK_M << CLK_SOURCE_SHIFT | CLK_UART_DIV_OVERRIDE | CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900),
- &clk_rst->clk_src_uarta);
+ write32(&clk_rst->clk_src_uarta,
+ CLK_M << CLK_SOURCE_SHIFT | CLK_UART_DIV_OVERRIDE | CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900));
setbits_le32(&clk_rst->clk_out_enb_l, CLK_L_UARTA);
udelay(2);
clrbits_le32(&clk_rst->rst_dev_l, CLK_L_UARTA);
@@ -438,22 +438,22 @@ void clock_sdram(u32 m, u32 n, u32 p, u32 setup, u32 ph45, u32 ph90,
* values after coldboot reset).
*/
- writel(misc1, &clk_rst->pllm_misc1);
- writel(misc2, &clk_rst->pllm_misc2);
+ write32(&clk_rst->pllm_misc1, misc1);
+ write32(&clk_rst->pllm_misc2, misc2);
/* PLLM.BASE needs BYPASS=0, different from general init_pll */
- base = readl(&clk_rst->pllm_base);
+ base = read32(&clk_rst->pllm_base);
base &= ~(PLLCMX_BASE_DIVN_MASK | PLLCMX_BASE_DIVM_MASK |
PLLM_BASE_DIVP_MASK | PLL_BASE_BYPASS);
base |= ((m << PLL_BASE_DIVM_SHIFT) | (n << PLL_BASE_DIVN_SHIFT) |
(p << PLL_BASE_DIVP_SHIFT));
- writel(base, &clk_rst->pllm_base);
+ write32(&clk_rst->pllm_base, base);
setbits_le32(&clk_rst->pllm_base, PLL_BASE_ENABLE);
/* stable_time is required, before we can start to check lock. */
udelay(stable_time);
- while (!(readl(&clk_rst->pllm_base) & PLL_BASE_LOCK)) {
+ while (!(read32(&clk_rst->pllm_base) & PLL_BASE_LOCK)) {
udelay(1);
}
/*
@@ -467,7 +467,7 @@ void clock_sdram(u32 m, u32 n, u32 p, u32 setup, u32 ph45, u32 ph90,
/* Enable and start MEM(MC) and EMC. */
clock_enable_clear_reset(0, CLK_H_MEM | CLK_H_EMC, 0, 0, 0, 0);
- writel(emc_source, &clk_rst->clk_src_emc);
+ write32(&clk_rst->clk_src_emc, emc_source);
udelay(IO_STABILIZATION_DELAY);
}
@@ -475,24 +475,24 @@ void clock_cpu0_config(void *entry)
{
void * const evp_cpu_reset = (uint8_t *)TEGRA_EVP_BASE + 0x100;
- writel((uintptr_t)_estack, &maincpu_stack_pointer);
- writel((uintptr_t)entry, &maincpu_entry_point);
- writel((uintptr_t)&maincpu_setup, evp_cpu_reset);
+ write32(&maincpu_stack_pointer, (uintptr_t)_estack);
+ write32(&maincpu_entry_point, (uintptr_t)entry);
+ write32(evp_cpu_reset, (uintptr_t)&maincpu_setup);
/* Set active CPU cluster to G */
clrbits_le32(&flow->cluster_control, 1);
// Set up cclk_brst and divider.
- writel((CRC_CCLK_BRST_POL_PLLX_OUT0 << 0) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 4) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 8) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 12) | (CRC_CCLK_BRST_POL_CPU_STATE_RUN << 28),
- &clk_rst->cclk_brst_pol);
- writel(CRC_SUPER_CCLK_DIVIDER_SUPER_CDIV_ENB,
- &clk_rst->super_cclk_div);
+ write32(&clk_rst->cclk_brst_pol,
+ (CRC_CCLK_BRST_POL_PLLX_OUT0 << 0) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 4) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 8) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 12) | (CRC_CCLK_BRST_POL_CPU_STATE_RUN << 28));
+ write32(&clk_rst->super_cclk_div,
+ CRC_SUPER_CCLK_DIVIDER_SUPER_CDIV_ENB);
// Enable the clocks for CPUs 0-3.
uint32_t cpu_cmplx_clr = read32(&clk_rst->clk_cpu_cmplx_clr);
cpu_cmplx_clr |= CRC_CLK_CLR_CPU0_STP | CRC_CLK_CLR_CPU1_STP |
CRC_CLK_CLR_CPU2_STP | CRC_CLK_CLR_CPU3_STP;
- writel(cpu_cmplx_clr, &clk_rst->clk_cpu_cmplx_clr);
+ write32(&clk_rst->clk_cpu_cmplx_clr, cpu_cmplx_clr);
// Enable other CPU related clocks.
setbits_le32(&clk_rst->clk_out_enb_l, CLK_L_CPU);
@@ -503,23 +503,23 @@ void clock_cpu0_config(void *entry)
void clock_cpu0_remove_reset(void)
{
// Disable the reset on the non-CPU parts of the fast cluster.
- writel(CRC_RST_CPUG_CLR_NONCPU, &clk_rst->rst_cpug_cmplx_clr);
+ write32(&clk_rst->rst_cpug_cmplx_clr, CRC_RST_CPUG_CLR_NONCPU);
// Disable the various resets on the CPUs.
- writel(CRC_RST_CPUG_CLR_CPU0 | CRC_RST_CPUG_CLR_CPU1 | CRC_RST_CPUG_CLR_CPU2 | CRC_RST_CPUG_CLR_CPU3 | CRC_RST_CPUG_CLR_DBG0 | CRC_RST_CPUG_CLR_DBG1 | CRC_RST_CPUG_CLR_DBG2 | CRC_RST_CPUG_CLR_DBG3 | CRC_RST_CPUG_CLR_CORE0 | CRC_RST_CPUG_CLR_CORE1 | CRC_RST_CPUG_CLR_CORE2 | CRC_RST_CPUG_CLR_CORE3 | CRC_RST_CPUG_CLR_CX0 | CRC_RST_CPUG_CLR_CX1 | CRC_RST_CPUG_CLR_CX2 | CRC_RST_CPUG_CLR_CX3 | CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG,
- &clk_rst->rst_cpug_cmplx_clr);
+ write32(&clk_rst->rst_cpug_cmplx_clr,
+ CRC_RST_CPUG_CLR_CPU0 | CRC_RST_CPUG_CLR_CPU1 | CRC_RST_CPUG_CLR_CPU2 | CRC_RST_CPUG_CLR_CPU3 | CRC_RST_CPUG_CLR_DBG0 | CRC_RST_CPUG_CLR_DBG1 | CRC_RST_CPUG_CLR_DBG2 | CRC_RST_CPUG_CLR_DBG3 | CRC_RST_CPUG_CLR_CORE0 | CRC_RST_CPUG_CLR_CORE1 | CRC_RST_CPUG_CLR_CORE2 | CRC_RST_CPUG_CLR_CORE3 | CRC_RST_CPUG_CLR_CX0 | CRC_RST_CPUG_CLR_CX1 | CRC_RST_CPUG_CLR_CX2 | CRC_RST_CPUG_CLR_CX3 | CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG);
// Disable the reset on the non-CPU parts of the slow cluster.
- writel(CRC_RST_CPULP_CLR_NONCPU, &clk_rst->rst_cpulp_cmplx_clr);
+ write32(&clk_rst->rst_cpulp_cmplx_clr, CRC_RST_CPULP_CLR_NONCPU);
// Disable the various resets on the LP CPU.
- writel(CRC_RST_CPULP_CLR_CPU0 | CRC_RST_CPULP_CLR_DBG0 | CRC_RST_CPULP_CLR_CORE0 | CRC_RST_CPULP_CLR_CX0 | CRC_RST_CPULP_CLR_L2 | CRC_RST_CPULP_CLR_PDBG,
- &clk_rst->rst_cpulp_cmplx_clr);
+ write32(&clk_rst->rst_cpulp_cmplx_clr,
+ CRC_RST_CPULP_CLR_CPU0 | CRC_RST_CPULP_CLR_DBG0 | CRC_RST_CPULP_CLR_CORE0 | CRC_RST_CPULP_CLR_CX0 | CRC_RST_CPULP_CLR_L2 | CRC_RST_CPULP_CLR_PDBG);
}
void clock_halt_avp(void)
{
for (;;) {
- writel(FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ | FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT,
- &flow->halt_cop_events);
+ write32(&flow->halt_cop_events,
+ FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ | FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT);
}
}
@@ -528,7 +528,7 @@ void clock_init(void)
u32 osc = clock_get_osc_bits();
/* Set PLLC dynramp_step A to 0x2b and B to 0xb (from U-Boot -- why? */
- writel(0x2b << 17 | 0xb << 9, &clk_rst->pllc_misc2);
+ write32(&clk_rst->pllc_misc2, 0x2b << 17 | 0xb << 9);
/* Max out the AVP clock before everything else (need PLLC for that). */
init_pll(&clk_rst->pllc_base, &clk_rst->pllc_misc,
@@ -536,12 +536,12 @@ void clock_init(void)
/* Typical ratios are 1:2:2 or 1:2:3 sclk:hclk:pclk (See: APB DMA
* features section in the TRM). */
- writel(TEGRA_HCLK_RATIO << HCLK_DIVISOR_SHIFT | TEGRA_PCLK_RATIO << PCLK_DIVISOR_SHIFT,
- &clk_rst->clk_sys_rate);
- writel(CLK_DIVIDER(TEGRA_PLLC_KHZ, TEGRA_SCLK_KHZ) << PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN | PLL_OUT_RSTN,
- &clk_rst->pllc_out);
- writel(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT,
- &clk_rst->sclk_brst_pol); /* sclk = 300 MHz */
+ write32(&clk_rst->clk_sys_rate,
+ TEGRA_HCLK_RATIO << HCLK_DIVISOR_SHIFT | TEGRA_PCLK_RATIO << PCLK_DIVISOR_SHIFT);
+ write32(&clk_rst->pllc_out,
+ CLK_DIVIDER(TEGRA_PLLC_KHZ, TEGRA_SCLK_KHZ) << PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN | PLL_OUT_RSTN);
+ write32(&clk_rst->sclk_brst_pol,
+ SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT); /* sclk = 300 MHz */
/* Change the oscillator drive strength (from U-Boot -- why?) */
clrsetbits_le32(&clk_rst->osc_ctrl, OSC_XOFS_MASK,
@@ -559,10 +559,10 @@ void clock_init(void)
clrbits_le32(&clk_rst->pllx_misc3, PLLX_IDDQ_MASK);
/* Set up PLLP_OUT(1|2|3|4) divisor to generate (9.6|48|102|204)MHz */
- writel((CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT,
- &clk_rst->pllp_outa);
- writel((CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT,
- &clk_rst->pllp_outb);
+ write32(&clk_rst->pllp_outa,
+ (CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT);
+ write32(&clk_rst->pllp_outb,
+ (CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT);
/* init pllx */
init_pll(&clk_rst->pllx_base, &clk_rst->pllx_misc,
@@ -578,62 +578,62 @@ void clock_init(void)
void clock_enable_clear_reset(u32 l, u32 h, u32 u, u32 v, u32 w, u32 x)
{
- if (l) writel(l, &clk_rst->clk_enb_l_set);
- if (h) writel(h, &clk_rst->clk_enb_h_set);
- if (u) writel(u, &clk_rst->clk_enb_u_set);
- if (v) writel(v, &clk_rst->clk_enb_v_set);
- if (w) writel(w, &clk_rst->clk_enb_w_set);
- if (x) writel(x, &clk_rst->clk_enb_x_set);
+ if (l) write32(&clk_rst->clk_enb_l_set, l);
+ if (h) write32(&clk_rst->clk_enb_h_set, h);
+ if (u) write32(&clk_rst->clk_enb_u_set, u);
+ if (v) write32(&clk_rst->clk_enb_v_set, v);
+ if (w) write32(&clk_rst->clk_enb_w_set, w);
+ if (x) write32(&clk_rst->clk_enb_x_set, x);
/* Give clocks time to stabilize. */
udelay(IO_STABILIZATION_DELAY);
- if (l) writel(l, &clk_rst->rst_dev_l_clr);
- if (h) writel(h, &clk_rst->rst_dev_h_clr);
- if (u) writel(u, &clk_rst->rst_dev_u_clr);
- if (v) writel(v, &clk_rst->rst_dev_v_clr);
- if (w) writel(w, &clk_rst->rst_dev_w_clr);
- if (x) writel(x, &clk_rst->rst_dev_x_clr);
+ if (l) write32(&clk_rst->rst_dev_l_clr, l);
+ if (h) write32(&clk_rst->rst_dev_h_clr, h);
+ if (u) write32(&clk_rst->rst_dev_u_clr, u);
+ if (v) write32(&clk_rst->rst_dev_v_clr, v);
+ if (w) write32(&clk_rst->rst_dev_w_clr, w);
+ if (x) write32(&clk_rst->rst_dev_x_clr, x);
}
void clock_reset_l(u32 bit)
{
- writel(bit, &clk_rst->rst_dev_l_set);
+ write32(&clk_rst->rst_dev_l_set, bit);
udelay(1);
- writel(bit, &clk_rst->rst_dev_l_clr);
+ write32(&clk_rst->rst_dev_l_clr, bit);
}
void clock_reset_h(u32 bit)
{
- writel(bit, &clk_rst->rst_dev_h_set);
+ write32(&clk_rst->rst_dev_h_set, bit);
udelay(1);
- writel(bit, &clk_rst->rst_dev_h_clr);
+ write32(&clk_rst->rst_dev_h_clr, bit);
}
void clock_reset_u(u32 bit)
{
- writel(bit, &clk_rst->rst_dev_u_set);
+ write32(&clk_rst->rst_dev_u_set, bit);
udelay(1);
- writel(bit, &clk_rst->rst_dev_u_clr);
+ write32(&clk_rst->rst_dev_u_clr, bit);
}
void clock_reset_v(u32 bit)
{
- writel(bit, &clk_rst->rst_dev_v_set);
+ write32(&clk_rst->rst_dev_v_set, bit);
udelay(1);
- writel(bit, &clk_rst->rst_dev_v_clr);
+ write32(&clk_rst->rst_dev_v_clr, bit);
}
void clock_reset_w(u32 bit)
{
- writel(bit, &clk_rst->rst_dev_w_set);
+ write32(&clk_rst->rst_dev_w_set, bit);
udelay(1);
- writel(bit, &clk_rst->rst_dev_w_clr);
+ write32(&clk_rst->rst_dev_w_clr, bit);
}
void clock_reset_x(u32 bit)
{
- writel(bit, &clk_rst->rst_dev_x_set);
+ write32(&clk_rst->rst_dev_x_set, bit);
udelay(1);
- writel(bit, &clk_rst->rst_dev_x_clr);
+ write32(&clk_rst->rst_dev_x_clr, bit);
}
diff --git a/src/soc/nvidia/tegra124/display.c b/src/soc/nvidia/tegra124/display.c
index 71fff1c93e..7273090eec 100644
--- a/src/soc/nvidia/tegra124/display.c
+++ b/src/soc/nvidia/tegra124/display.c
@@ -53,7 +53,7 @@ unsigned long READL(void * p)
if (dump > 1)
printk(BIOS_SPEW, "readl %p\n", p);
- value = readl(p);
+ value = read32(p);
if (dump)
printk(BIOS_SPEW, "readl %p %08lx\n", p, value);
return value;
@@ -63,7 +63,7 @@ void WRITEL(unsigned long value, void * p)
{
if (dump)
printk(BIOS_SPEW, "writel %p %08lx\n", p, value);
- writel(value, p);
+ write32(p, value);
}
/* return in 1000ths of a Hertz */
diff --git a/src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c b/src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c
index 9418e152da..2ed2103d15 100644
--- a/src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c
+++ b/src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c
@@ -282,17 +282,17 @@ inline static void write32(uint32_t val, void *addr)
inline static void setbits32(uint32_t bits, void *addr)
{
- writel(read32(addr) | bits, addr);
+ write32(addr, read32(addr) | bits);
}
inline static void clrbits32(uint32_t bits, void *addr)
{
- writel(read32(addr) & ~bits, addr);
+ write32(addr, read32(addr) & ~bits);
}
static void __attribute__((noreturn)) reset(void)
{
- writel(SWR_TRIG_SYS_RST, clk_rst_rst_devices_l_ptr);
+ write32(clk_rst_rst_devices_l_ptr, SWR_TRIG_SYS_RST);
halt();
}
@@ -337,7 +337,7 @@ static void config_oscillator(void)
osc_ctrl &= ~OSC_XOFS_MASK;
osc_ctrl |= (xofs << OSC_XOFS_SHIFT);
osc_ctrl |= OSC_XOE;
- writel(osc_ctrl, clk_rst_osc_ctrl_ptr);
+ write32(clk_rst_osc_ctrl_ptr, osc_ctrl);
}
static void config_pllu(void)
@@ -382,17 +382,17 @@ static void config_pllu(void)
// Configure PLLU.
uint32_t base = PLLU_BYPASS | PLLU_OVERRIDE |
(divn << PLLU_DIVN_SHIFT) | (divm << PLLU_DIVM_SHIFT);
- writel(base, clk_rst_pllu_base_ptr);
+ write32(clk_rst_pllu_base_ptr, base);
uint32_t misc = (cpcon << PLLU_CPCON_SHIFT) |
(lfcon << PLLU_LFCON_SHIFT);
- writel(misc, clk_rst_pllu_misc_ptr);
+ write32(clk_rst_pllu_misc_ptr, misc);
// Enable PLLU.
base &= ~PLLU_BYPASS;
base |= PLLU_ENABLE;
- writel(base, clk_rst_pllu_base_ptr);
+ write32(clk_rst_pllu_base_ptr, base);
misc |= PLLU_LOCK_ENABLE;
- writel(misc, clk_rst_pllu_misc_ptr);
+ write32(clk_rst_pllu_misc_ptr, misc);
}
static void config_tsc(void)
@@ -400,26 +400,26 @@ static void config_tsc(void)
// Tell the TSC the oscillator frequency.
switch (get_osc_freq()) {
case OSC_FREQ_12:
- writel(12000000, sysctr_cntfid0_ptr);
+ write32(sysctr_cntfid0_ptr, 12000000);
break;
case OSC_FREQ_48:
- writel(48000000, sysctr_cntfid0_ptr);
+ write32(sysctr_cntfid0_ptr, 48000000);
break;
case OSC_FREQ_16P8:
- writel(16800000, sysctr_cntfid0_ptr);
+ write32(sysctr_cntfid0_ptr, 16800000);
break;
case OSC_FREQ_19P2:
- writel(19200000, sysctr_cntfid0_ptr);
+ write32(sysctr_cntfid0_ptr, 19200000);
break;
case OSC_FREQ_38P4:
- writel(38400000, sysctr_cntfid0_ptr);
+ write32(sysctr_cntfid0_ptr, 38400000);
break;
case OSC_FREQ_26:
- writel(26000000, sysctr_cntfid0_ptr);
+ write32(sysctr_cntfid0_ptr, 26000000);
break;
default:
// Default to 13MHz.
- writel(13000000, sysctr_cntfid0_ptr);
+ write32(sysctr_cntfid0_ptr, 13000000);
break;
}
@@ -430,8 +430,8 @@ static void config_tsc(void)
static void enable_cpu_clocks(void)
{
// Enable the CPU complex clock.
- writel(CLK_ENB_CPU, clk_rst_clk_enb_l_set_ptr);
- writel(CLK_ENB_CPUG | CLK_ENB_CPULP, clk_rst_clk_enb_v_set_ptr);
+ write32(clk_rst_clk_enb_l_set_ptr, CLK_ENB_CPU);
+ write32(clk_rst_clk_enb_v_set_ptr, CLK_ENB_CPUG | CLK_ENB_CPULP);
}
@@ -441,7 +441,7 @@ static void enable_cpu_clocks(void)
static void config_core_sight(void)
{
// Enable the CoreSight clock.
- writel(CLK_ENB_CSITE, clk_rst_clk_out_enb_u_set_ptr);
+ write32(clk_rst_clk_out_enb_u_set_ptr, CLK_ENB_CSITE);
/*
* De-assert CoreSight reset.
@@ -449,22 +449,22 @@ static void config_core_sight(void)
* now. It will be restored to its original clock source
* when the CPU-side restoration code runs.
*/
- writel(SWR_CSITE_RST, clk_rst_rst_dev_u_clr_ptr);
+ write32(clk_rst_rst_dev_u_clr_ptr, SWR_CSITE_RST);
}
static void config_mselect(void)
{
// Set MSELECT clock source to PLLP with 1:4 divider.
- writel((6 << MSELECT_CLK_DIV_SHIFT) | MSELECT_CLK_SRC_PLLP_OUT0,
- clk_rst_clk_src_mselect_ptr);
+ write32(clk_rst_clk_src_mselect_ptr,
+ (6 << MSELECT_CLK_DIV_SHIFT) | MSELECT_CLK_SRC_PLLP_OUT0);
// Enable clock to MSELECT.
- writel(CLK_ENB_MSELECT, clk_rst_clk_enb_v_set_ptr);
+ write32(clk_rst_clk_enb_v_set_ptr, CLK_ENB_MSELECT);
udelay(2);
// Bring MSELECT out of reset.
- writel(SWR_MSELECT_RST, clk_rst_rst_dev_v_clr_ptr);
+ write32(clk_rst_rst_dev_v_clr_ptr, SWR_MSELECT_RST);
}
@@ -474,16 +474,16 @@ static void config_mselect(void)
static void clear_cpu_resets(void)
{
// Take the non-cpu of the G and LP clusters out of reset.
- writel(CLR_NONCPURESET, clk_rst_rst_cpulp_cmplx_clr_ptr);
- writel(CLR_NONCPURESET, clk_rst_rst_cpug_cmplx_clr_ptr);
+ write32(clk_rst_rst_cpulp_cmplx_clr_ptr, CLR_NONCPURESET);
+ write32(clk_rst_rst_cpug_cmplx_clr_ptr, CLR_NONCPURESET);
// Clear software controlled reset of the slow cluster.
- writel(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0,
- clk_rst_rst_cpulp_cmplx_clr_ptr);
+ write32(clk_rst_rst_cpulp_cmplx_clr_ptr,
+ CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0);
// Clear software controlled reset of the fast cluster.
- writel(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 | CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 | CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 | CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3,
- clk_rst_rst_cpug_cmplx_clr_ptr);
+ write32(clk_rst_rst_cpug_cmplx_clr_ptr,
+ CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 | CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 | CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 | CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3);
}
@@ -513,7 +513,8 @@ static void power_on_partition(unsigned id)
uint32_t bit = 0x1 << id;
if (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit)) {
// Partition is not on. Turn it on.
- writel(id | PWRGATE_TOGGLE_START, pmc_ctlr_pwrgate_toggle_ptr);
+ write32(pmc_ctlr_pwrgate_toggle_ptr,
+ id | PWRGATE_TOGGLE_START);
// Wait until the partition is powerd on.
while (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit))
@@ -543,8 +544,8 @@ static void power_on_main_cpu(void)
*/
uint32_t orig_timer = read32(pmc_ctlr_cpupwrgood_timer_ptr);
- writel(orig_timer * (204000000 / 32768),
- pmc_ctlr_cpupwrgood_timer_ptr);
+ write32(pmc_ctlr_cpupwrgood_timer_ptr,
+ orig_timer * (204000000 / 32768));
if (wakeup_on_lp()) {
power_on_partition(PARTID_C1NC);
@@ -556,7 +557,7 @@ static void power_on_main_cpu(void)
}
// Restore the original PMC_CPUPWRGOOD_TIMER.
- writel(orig_timer, pmc_ctlr_cpupwrgood_timer_ptr);
+ write32(pmc_ctlr_cpupwrgood_timer_ptr, orig_timer);
}
@@ -578,17 +579,17 @@ void lp0_resume(void)
flow_ctlr_cluster_control_ptr);
// Program SUPER_CCLK_DIVIDER.
- writel(SUPER_CDIV_ENB, clk_rst_super_cclk_div_ptr);
+ write32(clk_rst_super_cclk_div_ptr, SUPER_CDIV_ENB);
config_core_sight();
config_pllu();
// Set the CPU reset vector.
- writel(get_wakeup_vector(), evp_cpu_reset_ptr);
+ write32(evp_cpu_reset_ptr, get_wakeup_vector());
// Select CPU complex clock source.
- writel(CCLK_PLLP_BURST_POLICY, clk_rst_cclk_burst_policy_ptr);
+ write32(clk_rst_cclk_burst_policy_ptr, CCLK_PLLP_BURST_POLICY);
config_mselect();
@@ -599,14 +600,14 @@ void lp0_resume(void)
uint32_t ack_width = read32(clk_rst_cpu_softrst_ctrl2_ptr);
ack_width &= ~CAR2PMC_CPU_ACK_WIDTH_MASK;
ack_width |= 408 << CAR2PMC_CPU_ACK_WIDTH_SHIFT;
- writel(ack_width, clk_rst_cpu_softrst_ctrl2_ptr);
+ write32(clk_rst_cpu_softrst_ctrl2_ptr, ack_width);
config_tsc();
// Disable VPR.
- writel(0, mc_video_protect_size_mb_ptr);
- writel(VIDEO_PROTECT_WRITE_ACCESS_DISABLE,
- mc_video_protect_reg_ctrl_ptr);
+ write32(mc_video_protect_size_mb_ptr, 0);
+ write32(mc_video_protect_reg_ctrl_ptr,
+ VIDEO_PROTECT_WRITE_ACCESS_DISABLE);
enable_cpu_clocks();
@@ -619,8 +620,8 @@ void lp0_resume(void)
// Halt the AVP.
while (1)
- writel(FLOW_MODE_STOP | EVENT_JTAG,
- flow_ctlr_halt_cop_events_ptr);
+ write32(flow_ctlr_halt_cop_events_ptr,
+ FLOW_MODE_STOP | EVENT_JTAG);
}
diff --git a/src/soc/nvidia/tegra124/power.c b/src/soc/nvidia/tegra124/power.c
index b31d3a7781..962a8e12e3 100644
--- a/src/soc/nvidia/tegra124/power.c
+++ b/src/soc/nvidia/tegra124/power.c
@@ -48,7 +48,7 @@ static void power_ungate_partition(uint32_t id)
pwrgate_toggle &= ~(PMC_PWRGATE_TOGGLE_PARTID_MASK);
pwrgate_toggle |= (id << PMC_PWRGATE_TOGGLE_PARTID_SHIFT);
pwrgate_toggle |= PMC_PWRGATE_TOGGLE_START;
- writel(pwrgate_toggle, &pmc->pwrgate_toggle);
+ write32(&pmc->pwrgate_toggle, pwrgate_toggle);
// Wait for the request to be accepted.
while (read32(&pmc->pwrgate_toggle) & PMC_PWRGATE_TOGGLE_START)
@@ -73,12 +73,12 @@ void power_enable_and_ungate_cpu(void)
* Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (150MHz),
* set it for 5ms as per SysEng (5ms * PCLK_KHZ * 1000 / 1s).
*/
- writel((TEGRA_PCLK_KHZ * 5), &pmc->cpupwrgood_timer);
+ write32(&pmc->cpupwrgood_timer, (TEGRA_PCLK_KHZ * 5));
uint32_t cntrl = read32(&pmc->cntrl);
cntrl &= ~PMC_CNTRL_CPUPWRREQ_POLARITY;
cntrl |= PMC_CNTRL_CPUPWRREQ_OE;
- writel(cntrl, &pmc->cntrl);
+ write32(&pmc->cntrl, cntrl);
power_ungate_partition(POWER_PARTID_CRAIL);
diff --git a/src/soc/nvidia/tegra124/sdram.c b/src/soc/nvidia/tegra124/sdram.c
index d094c18594..dc6fd92544 100644
--- a/src/soc/nvidia/tegra124/sdram.c
+++ b/src/soc/nvidia/tegra124/sdram.c
@@ -33,7 +33,7 @@
static void sdram_patch(uintptr_t addr, uint32_t value)
{
if (addr)
- writel(value, (uint32_t*)addr);
+ write32((uint32_t *)addr, value);
}
static void writebits(uint32_t value, uint32_t *addr, uint32_t mask)
@@ -46,7 +46,7 @@ static void sdram_configure_pmc(const struct sdram_params *param,
struct tegra_pmc_regs *regs)
{
/* VDDP Select */
- writel(param->PmcVddpSel, &regs->vddp_sel);
+ write32(&regs->vddp_sel, param->PmcVddpSel);
udelay(param->PmcVddpSelWait);
/* Set DDR pad voltage */
@@ -62,7 +62,7 @@ static void sdram_configure_pmc(const struct sdram_params *param,
writebits(param->PmcNoIoPower, &regs->no_iopower,
(PMC_NO_IOPOWER_MEM_MASK | PMC_NO_IOPOWER_MEM_COMP_MASK));
- writel(param->PmcRegShort, &regs->reg_short);
+ write32(&regs->reg_short, param->PmcRegShort);
}
static void sdram_start_clocks(const struct sdram_params *param)
@@ -102,148 +102,151 @@ static void sdram_deassert_sel_dpd(const struct sdram_params *param,
static void sdram_set_swizzle(const struct sdram_params *param,
struct tegra_emc_regs *regs)
{
- writel(param->EmcSwizzleRank0ByteCfg, &regs->swizzle_rank0_byte_cfg);
- writel(param->EmcSwizzleRank0Byte0, &regs->swizzle_rank0_byte0);
- writel(param->EmcSwizzleRank0Byte1, &regs->swizzle_rank0_byte1);
- writel(param->EmcSwizzleRank0Byte2, &regs->swizzle_rank0_byte2);
- writel(param->EmcSwizzleRank0Byte3, &regs->swizzle_rank0_byte3);
- writel(param->EmcSwizzleRank1ByteCfg, &regs->swizzle_rank1_byte_cfg);
- writel(param->EmcSwizzleRank1Byte0, &regs->swizzle_rank1_byte0);
- writel(param->EmcSwizzleRank1Byte1, &regs->swizzle_rank1_byte1);
- writel(param->EmcSwizzleRank1Byte2, &regs->swizzle_rank1_byte2);
- writel(param->EmcSwizzleRank1Byte3, &regs->swizzle_rank1_byte3);
+ write32(&regs->swizzle_rank0_byte_cfg, param->EmcSwizzleRank0ByteCfg);
+ write32(&regs->swizzle_rank0_byte0, param->EmcSwizzleRank0Byte0);
+ write32(&regs->swizzle_rank0_byte1, param->EmcSwizzleRank0Byte1);
+ write32(&regs->swizzle_rank0_byte2, param->EmcSwizzleRank0Byte2);
+ write32(&regs->swizzle_rank0_byte3, param->EmcSwizzleRank0Byte3);
+ write32(&regs->swizzle_rank1_byte_cfg, param->EmcSwizzleRank1ByteCfg);
+ write32(&regs->swizzle_rank1_byte0, param->EmcSwizzleRank1Byte0);
+ write32(&regs->swizzle_rank1_byte1, param->EmcSwizzleRank1Byte1);
+ write32(&regs->swizzle_rank1_byte2, param->EmcSwizzleRank1Byte2);
+ write32(&regs->swizzle_rank1_byte3, param->EmcSwizzleRank1Byte3);
}
static void sdram_set_pad_controls(const struct sdram_params *param,
struct tegra_emc_regs *regs)
{
/* Program the pad controls */
- writel(param->EmcXm2CmdPadCtrl, &regs->xm2cmdpadctrl);
- writel(param->EmcXm2CmdPadCtrl2, &regs->xm2cmdpadctrl2);
- writel(param->EmcXm2CmdPadCtrl3, &regs->xm2cmdpadctrl3);
- writel(param->EmcXm2CmdPadCtrl4, &regs->xm2cmdpadctrl4);
- writel(param->EmcXm2CmdPadCtrl5, &regs->xm2cmdpadctrl5);
+ write32(&regs->xm2cmdpadctrl, param->EmcXm2CmdPadCtrl);
+ write32(&regs->xm2cmdpadctrl2, param->EmcXm2CmdPadCtrl2);
+ write32(&regs->xm2cmdpadctrl3, param->EmcXm2CmdPadCtrl3);
+ write32(&regs->xm2cmdpadctrl4, param->EmcXm2CmdPadCtrl4);
+ write32(&regs->xm2cmdpadctrl5, param->EmcXm2CmdPadCtrl5);
- writel(param->EmcXm2DqsPadCtrl, &regs->xm2dqspadctrl);
- writel(param->EmcXm2DqsPadCtrl2, &regs->xm2dqspadctrl2);
- writel(param->EmcXm2DqsPadCtrl3, &regs->xm2dqspadctrl3);
- writel(param->EmcXm2DqsPadCtrl4, &regs->xm2dqspadctrl4);
- writel(param->EmcXm2DqsPadCtrl5, &regs->xm2dqspadctrl5);
- writel(param->EmcXm2DqsPadCtrl6, &regs->xm2dqspadctrl6);
+ write32(&regs->xm2dqspadctrl, param->EmcXm2DqsPadCtrl);
+ write32(&regs->xm2dqspadctrl2, param->EmcXm2DqsPadCtrl2);
+ write32(&regs->xm2dqspadctrl3, param->EmcXm2DqsPadCtrl3);
+ write32(&regs->xm2dqspadctrl4, param->EmcXm2DqsPadCtrl4);
+ write32(&regs->xm2dqspadctrl5, param->EmcXm2DqsPadCtrl5);
+ write32(&regs->xm2dqspadctrl6, param->EmcXm2DqsPadCtrl6);
- writel(param->EmcXm2DqPadCtrl, &regs->xm2dqpadctrl);
- writel(param->EmcXm2DqPadCtrl2, &regs->xm2dqpadctrl2);
- writel(param->EmcXm2DqPadCtrl3, &regs->xm2dqpadctrl3);
+ write32(&regs->xm2dqpadctrl, param->EmcXm2DqPadCtrl);
+ write32(&regs->xm2dqpadctrl2, param->EmcXm2DqPadCtrl2);
+ write32(&regs->xm2dqpadctrl3, param->EmcXm2DqPadCtrl3);
- writel(param->EmcXm2ClkPadCtrl, &regs->xm2clkpadctrl);
- writel(param->EmcXm2ClkPadCtrl2, &regs->xm2clkpadctrl2);
+ write32(&regs->xm2clkpadctrl, param->EmcXm2ClkPadCtrl);
+ write32(&regs->xm2clkpadctrl2, param->EmcXm2ClkPadCtrl2);
- writel(param->EmcXm2CompPadCtrl, &regs->xm2comppadctrl);
+ write32(&regs->xm2comppadctrl, param->EmcXm2CompPadCtrl);
- writel(param->EmcXm2VttGenPadCtrl, &regs->xm2vttgenpadctrl);
- writel(param->EmcXm2VttGenPadCtrl2, &regs->xm2vttgenpadctrl2);
- writel(param->EmcXm2VttGenPadCtrl3, &regs->xm2vttgenpadctrl3);
+ write32(&regs->xm2vttgenpadctrl, param->EmcXm2VttGenPadCtrl);
+ write32(&regs->xm2vttgenpadctrl2, param->EmcXm2VttGenPadCtrl2);
+ write32(&regs->xm2vttgenpadctrl3, param->EmcXm2VttGenPadCtrl3);
- writel(param->EmcCttTermCtrl, &regs->ctt_term_ctrl);
+ write32(&regs->ctt_term_ctrl, param->EmcCttTermCtrl);
}
static void sdram_trigger_emc_timing_update(struct tegra_emc_regs *regs)
{
- writel(EMC_TIMING_CONTROL_TIMING_UPDATE, &regs->timing_control);
+ write32(&regs->timing_control, EMC_TIMING_CONTROL_TIMING_UPDATE);
}
static void sdram_init_mc(const struct sdram_params *param,
struct tegra_mc_regs *regs)
{
/* Initialize MC VPR settings */
- writel(param->McDisplaySnapRing, &regs->display_snap_ring);
- writel(param->McVideoProtectBom, &regs->video_protect_bom);
- writel(param->McVideoProtectBomAdrHi, &regs->video_protect_bom_adr_hi);
- writel(param->McVideoProtectSizeMb, &regs->video_protect_size_mb);
- writel(param->McVideoProtectVprOverride,
- &regs->video_protect_vpr_override);
- writel(param->McVideoProtectVprOverride1,
- &regs->video_protect_vpr_override1);
- writel(param->McVideoProtectGpuOverride0,
- &regs->video_protect_gpu_override_0);
- writel(param->McVideoProtectGpuOverride1,
- &regs->video_protect_gpu_override_1);
+ write32(&regs->display_snap_ring, param->McDisplaySnapRing);
+ write32(&regs->video_protect_bom, param->McVideoProtectBom);
+ write32(&regs->video_protect_bom_adr_hi,
+ param->McVideoProtectBomAdrHi);
+ write32(&regs->video_protect_size_mb, param->McVideoProtectSizeMb);
+ write32(&regs->video_protect_vpr_override,
+ param->McVideoProtectVprOverride);
+ write32(&regs->video_protect_vpr_override1,
+ param->McVideoProtectVprOverride1);
+ write32(&regs->video_protect_gpu_override_0,
+ param->McVideoProtectGpuOverride0);
+ write32(&regs->video_protect_gpu_override_1,
+ param->McVideoProtectGpuOverride1);
/* Program SDRAM geometry paarameters */
- writel(param->McEmemAdrCfg, &regs->emem_adr_cfg);
- writel(param->McEmemAdrCfgDev0, &regs->emem_adr_cfg_dev0);
- writel(param->McEmemAdrCfgDev1, &regs->emem_adr_cfg_dev1);
+ write32(&regs->emem_adr_cfg, param->McEmemAdrCfg);
+ write32(&regs->emem_adr_cfg_dev0, param->McEmemAdrCfgDev0);
+ write32(&regs->emem_adr_cfg_dev1, param->McEmemAdrCfgDev1);
/* Program bank swizzling */
- writel(param->McEmemAdrCfgBankMask0, &regs->emem_bank_swizzle_cfg0);
- writel(param->McEmemAdrCfgBankMask1, &regs->emem_bank_swizzle_cfg1);
- writel(param->McEmemAdrCfgBankMask2, &regs->emem_bank_swizzle_cfg2);
- writel(param->McEmemAdrCfgBankSwizzle3, &regs->emem_bank_swizzle_cfg3);
+ write32(&regs->emem_bank_swizzle_cfg0, param->McEmemAdrCfgBankMask0);
+ write32(&regs->emem_bank_swizzle_cfg1, param->McEmemAdrCfgBankMask1);
+ write32(&regs->emem_bank_swizzle_cfg2, param->McEmemAdrCfgBankMask2);
+ write32(&regs->emem_bank_swizzle_cfg3,
+ param->McEmemAdrCfgBankSwizzle3);
/* Program external memory aperature (base and size) */
- writel(param->McEmemCfg, &regs->emem_cfg);
+ write32(&regs->emem_cfg, param->McEmemCfg);
/* Program SEC carveout (base and size) */
- writel(param->McSecCarveoutBom, &regs->sec_carveout_bom);
- writel(param->McSecCarveoutAdrHi, &regs->sec_carveout_adr_hi);
- writel(param->McSecCarveoutSizeMb, &regs->sec_carveout_size_mb);
+ write32(&regs->sec_carveout_bom, param->McSecCarveoutBom);
+ write32(&regs->sec_carveout_adr_hi, param->McSecCarveoutAdrHi);
+ write32(&regs->sec_carveout_size_mb, param->McSecCarveoutSizeMb);
/* Program MTS carveout (base and size) */
- writel(param->McMtsCarveoutBom, &regs->mts_carveout_bom);
- writel(param->McMtsCarveoutAdrHi, &regs->mts_carveout_adr_hi);
- writel(param->McMtsCarveoutSizeMb, &regs->mts_carveout_size_mb);
+ write32(&regs->mts_carveout_bom, param->McMtsCarveoutBom);
+ write32(&regs->mts_carveout_adr_hi, param->McMtsCarveoutAdrHi);
+ write32(&regs->mts_carveout_size_mb, param->McMtsCarveoutSizeMb);
/* Program the memory arbiter */
- writel(param->McEmemArbCfg, &regs->emem_arb_cfg);
- writel(param->McEmemArbOutstandingReq, &regs->emem_arb_outstanding_req);
- writel(param->McEmemArbTimingRcd, &regs->emem_arb_timing_rcd);
- writel(param->McEmemArbTimingRp, &regs->emem_arb_timing_rp);
- writel(param->McEmemArbTimingRc, &regs->emem_arb_timing_rc);
- writel(param->McEmemArbTimingRas, &regs->emem_arb_timing_ras);
- writel(param->McEmemArbTimingFaw, &regs->emem_arb_timing_faw);
- writel(param->McEmemArbTimingRrd, &regs->emem_arb_timing_rrd);
- writel(param->McEmemArbTimingRap2Pre, &regs->emem_arb_timing_rap2pre);
- writel(param->McEmemArbTimingWap2Pre, &regs->emem_arb_timing_wap2pre);
- writel(param->McEmemArbTimingR2R, &regs->emem_arb_timing_r2r);
- writel(param->McEmemArbTimingW2W, &regs->emem_arb_timing_w2w);
- writel(param->McEmemArbTimingR2W, &regs->emem_arb_timing_r2w);
- writel(param->McEmemArbTimingW2R, &regs->emem_arb_timing_w2r);
- writel(param->McEmemArbDaTurns, &regs->emem_arb_da_turns);
- writel(param->McEmemArbDaCovers, &regs->emem_arb_da_covers);
- writel(param->McEmemArbMisc0, &regs->emem_arb_misc0);
- writel(param->McEmemArbMisc1, &regs->emem_arb_misc1);
- writel(param->McEmemArbRing1Throttle, &regs->emem_arb_ring1_throttle);
- writel(param->McEmemArbOverride, &regs->emem_arb_override);
- writel(param->McEmemArbOverride1, &regs->emem_arb_override_1);
- writel(param->McEmemArbRsv, &regs->emem_arb_rsv);
+ write32(&regs->emem_arb_cfg, param->McEmemArbCfg);
+ write32(&regs->emem_arb_outstanding_req,
+ param->McEmemArbOutstandingReq);
+ write32(&regs->emem_arb_timing_rcd, param->McEmemArbTimingRcd);
+ write32(&regs->emem_arb_timing_rp, param->McEmemArbTimingRp);
+ write32(&regs->emem_arb_timing_rc, param->McEmemArbTimingRc);
+ write32(&regs->emem_arb_timing_ras, param->McEmemArbTimingRas);
+ write32(&regs->emem_arb_timing_faw, param->McEmemArbTimingFaw);
+ write32(&regs->emem_arb_timing_rrd, param->McEmemArbTimingRrd);
+ write32(&regs->emem_arb_timing_rap2pre, param->McEmemArbTimingRap2Pre);
+ write32(&regs->emem_arb_timing_wap2pre, param->McEmemArbTimingWap2Pre);
+ write32(&regs->emem_arb_timing_r2r, param->McEmemArbTimingR2R);
+ write32(&regs->emem_arb_timing_w2w, param->McEmemArbTimingW2W);
+ write32(&regs->emem_arb_timing_r2w, param->McEmemArbTimingR2W);
+ write32(&regs->emem_arb_timing_w2r, param->McEmemArbTimingW2R);
+ write32(&regs->emem_arb_da_turns, param->McEmemArbDaTurns);
+ write32(&regs->emem_arb_da_covers, param->McEmemArbDaCovers);
+ write32(&regs->emem_arb_misc0, param->McEmemArbMisc0);
+ write32(&regs->emem_arb_misc1, param->McEmemArbMisc1);
+ write32(&regs->emem_arb_ring1_throttle, param->McEmemArbRing1Throttle);
+ write32(&regs->emem_arb_override, param->McEmemArbOverride);
+ write32(&regs->emem_arb_override_1, param->McEmemArbOverride1);
+ write32(&regs->emem_arb_rsv, param->McEmemArbRsv);
/* Program extra snap levels for display client */
- writel(param->McDisExtraSnapLevels, &regs->dis_extra_snap_levels);
+ write32(&regs->dis_extra_snap_levels, param->McDisExtraSnapLevels);
/* Trigger MC timing update */
- writel(MC_TIMING_CONTROL_TIMING_UPDATE, &regs->timing_control);
+ write32(&regs->timing_control, MC_TIMING_CONTROL_TIMING_UPDATE);
/* Program second-level clock enable overrides */
- writel(param->McClkenOverride, &regs->clken_override);
+ write32(&regs->clken_override, param->McClkenOverride);
/* Program statistics gathering */
- writel(param->McStatControl, &regs->stat_control);
+ write32(&regs->stat_control, param->McStatControl);
}
static void sdram_init_emc(const struct sdram_params *param,
struct tegra_emc_regs *regs)
{
/* Program SDRAM geometry parameters */
- writel(param->EmcAdrCfg, &regs->adr_cfg);
+ write32(&regs->adr_cfg, param->EmcAdrCfg);
/* Program second-level clock enable overrides */
- writel(param->EmcClkenOverride, &regs->clken_override);
+ write32(&regs->clken_override, param->EmcClkenOverride);
/* Program EMC pad auto calibration */
- writel(param->EmcAutoCalInterval, &regs->auto_cal_interval);
- writel(param->EmcAutoCalConfig2, &regs->auto_cal_config2);
- writel(param->EmcAutoCalConfig3, &regs->auto_cal_config3);
- writel(param->EmcAutoCalConfig, &regs->auto_cal_config);
+ write32(&regs->auto_cal_interval, param->EmcAutoCalInterval);
+ write32(&regs->auto_cal_config2, param->EmcAutoCalConfig2);
+ write32(&regs->auto_cal_config3, param->EmcAutoCalConfig3);
+ write32(&regs->auto_cal_config, param->EmcAutoCalConfig);
udelay(param->EmcAutoCalWait);
}
@@ -251,129 +254,129 @@ static void sdram_set_emc_timing(const struct sdram_params *param,
struct tegra_emc_regs *regs)
{
/* Program EMC timing configuration */
- writel(param->EmcCfg2, &regs->cfg_2);
- writel(param->EmcCfgPipe, &regs->cfg_pipe);
- writel(param->EmcDbg, &regs->dbg);
- writel(param->EmcCmdQ, &regs->cmdq);
- writel(param->EmcMc2EmcQ, &regs->mc2emcq);
- writel(param->EmcMrsWaitCnt, &regs->mrs_wait_cnt);
- writel(param->EmcMrsWaitCnt2, &regs->mrs_wait_cnt2);
- writel(param->EmcFbioCfg5, &regs->fbio_cfg5);
- writel(param->EmcRc, &regs->rc);
- writel(param->EmcRfc, &regs->rfc);
- writel(param->EmcRfcSlr, &regs->rfc_slr);
- writel(param->EmcRas, &regs->ras);
- writel(param->EmcRp, &regs->rp);
- writel(param->EmcR2r, &regs->r2r);
- writel(param->EmcW2w, &regs->w2w);
- writel(param->EmcR2w, &regs->r2w);
- writel(param->EmcW2r, &regs->w2r);
- writel(param->EmcR2p, &regs->r2p);
- writel(param->EmcW2p, &regs->w2p);
- writel(param->EmcRdRcd, &regs->rd_rcd);
- writel(param->EmcWrRcd, &regs->wr_rcd);
- writel(param->EmcRrd, &regs->rrd);
- writel(param->EmcRext, &regs->rext);
- writel(param->EmcWext, &regs->wext);
- writel(param->EmcWdv, &regs->wdv);
- writel(param->EmcWdvMask, &regs->wdv_mask);
- writel(param->EmcQUse, &regs->quse);
- writel(param->EmcQuseWidth, &regs->quse_width);
- writel(param->EmcIbdly, &regs->ibdly);
- writel(param->EmcEInput, &regs->einput);
- writel(param->EmcEInputDuration, &regs->einput_duration);
- writel(param->EmcPutermExtra, &regs->puterm_extra);
- writel(param->EmcPutermWidth, &regs->puterm_width);
- writel(param->EmcPutermAdj, &regs->puterm_adj);
- writel(param->EmcCdbCntl1, &regs->cdb_cntl_1);
- writel(param->EmcCdbCntl2, &regs->cdb_cntl_2);
- writel(param->EmcCdbCntl3, &regs->cdb_cntl_3);
- writel(param->EmcQRst, &regs->qrst);
- writel(param->EmcQSafe, &regs->qsafe);
- writel(param->EmcRdv, &regs->rdv);
- writel(param->EmcRdvMask, &regs->rdv_mask);
- writel(param->EmcQpop, &regs->qpop);
- writel(param->EmcCtt, &regs->ctt);
- writel(param->EmcCttDuration, &regs->ctt_duration);
- writel(param->EmcRefresh, &regs->refresh);
- writel(param->EmcBurstRefreshNum, &regs->burst_refresh_num);
- writel(param->EmcPreRefreshReqCnt, &regs->pre_refresh_req_cnt);
- writel(param->EmcPdEx2Wr, &regs->pdex2wr);
- writel(param->EmcPdEx2Rd, &regs->pdex2rd);
- writel(param->EmcPChg2Pden, &regs->pchg2pden);
- writel(param->EmcAct2Pden, &regs->act2pden);
- writel(param->EmcAr2Pden, &regs->ar2pden);
- writel(param->EmcRw2Pden, &regs->rw2pden);
- writel(param->EmcTxsr, &regs->txsr);
- writel(param->EmcTxsrDll, &regs->txsrdll);
- writel(param->EmcTcke, &regs->tcke);
- writel(param->EmcTckesr, &regs->tckesr);
- writel(param->EmcTpd, &regs->tpd);
- writel(param->EmcTfaw, &regs->tfaw);
- writel(param->EmcTrpab, &regs->trpab);
- writel(param->EmcTClkStable, &regs->tclkstable);
- writel(param->EmcTClkStop, &regs->tclkstop);
- writel(param->EmcTRefBw, &regs->trefbw);
- writel(param->EmcOdtWrite, &regs->odt_write);
- writel(param->EmcOdtRead, &regs->odt_read);
- writel(param->EmcFbioCfg6, &regs->fbio_cfg6);
- writel(param->EmcCfgDigDll, &regs->cfg_dig_dll);
- writel(param->EmcCfgDigDllPeriod, &regs->cfg_dig_dll_period);
+ write32(&regs->cfg_2, param->EmcCfg2);
+ write32(&regs->cfg_pipe, param->EmcCfgPipe);
+ write32(&regs->dbg, param->EmcDbg);
+ write32(&regs->cmdq, param->EmcCmdQ);
+ write32(&regs->mc2emcq, param->EmcMc2EmcQ);
+ write32(&regs->mrs_wait_cnt, param->EmcMrsWaitCnt);
+ write32(&regs->mrs_wait_cnt2, param->EmcMrsWaitCnt2);
+ write32(&regs->fbio_cfg5, param->EmcFbioCfg5);
+ write32(&regs->rc, param->EmcRc);
+ write32(&regs->rfc, param->EmcRfc);
+ write32(&regs->rfc_slr, param->EmcRfcSlr);
+ write32(&regs->ras, param->EmcRas);
+ write32(&regs->rp, param->EmcRp);
+ write32(&regs->r2r, param->EmcR2r);
+ write32(&regs->w2w, param->EmcW2w);
+ write32(&regs->r2w, param->EmcR2w);
+ write32(&regs->w2r, param->EmcW2r);
+ write32(&regs->r2p, param->EmcR2p);
+ write32(&regs->w2p, param->EmcW2p);
+ write32(&regs->rd_rcd, param->EmcRdRcd);
+ write32(&regs->wr_rcd, param->EmcWrRcd);
+ write32(&regs->rrd, param->EmcRrd);
+ write32(&regs->rext, param->EmcRext);
+ write32(&regs->wext, param->EmcWext);
+ write32(&regs->wdv, param->EmcWdv);
+ write32(&regs->wdv_mask, param->EmcWdvMask);
+ write32(&regs->quse, param->EmcQUse);
+ write32(&regs->quse_width, param->EmcQuseWidth);
+ write32(&regs->ibdly, param->EmcIbdly);
+ write32(&regs->einput, param->EmcEInput);
+ write32(&regs->einput_duration, param->EmcEInputDuration);
+ write32(&regs->puterm_extra, param->EmcPutermExtra);
+ write32(&regs->puterm_width, param->EmcPutermWidth);
+ write32(&regs->puterm_adj, param->EmcPutermAdj);
+ write32(&regs->cdb_cntl_1, param->EmcCdbCntl1);
+ write32(&regs->cdb_cntl_2, param->EmcCdbCntl2);
+ write32(&regs->cdb_cntl_3, param->EmcCdbCntl3);
+ write32(&regs->qrst, param->EmcQRst);
+ write32(&regs->qsafe, param->EmcQSafe);
+ write32(&regs->rdv, param->EmcRdv);
+ write32(&regs->rdv_mask, param->EmcRdvMask);
+ write32(&regs->qpop, param->EmcQpop);
+ write32(&regs->ctt, param->EmcCtt);
+ write32(&regs->ctt_duration, param->EmcCttDuration);
+ write32(&regs->refresh, param->EmcRefresh);
+ write32(&regs->burst_refresh_num, param->EmcBurstRefreshNum);
+ write32(&regs->pre_refresh_req_cnt, param->EmcPreRefreshReqCnt);
+ write32(&regs->pdex2wr, param->EmcPdEx2Wr);
+ write32(&regs->pdex2rd, param->EmcPdEx2Rd);
+ write32(&regs->pchg2pden, param->EmcPChg2Pden);
+ write32(&regs->act2pden, param->EmcAct2Pden);
+ write32(&regs->ar2pden, param->EmcAr2Pden);
+ write32(&regs->rw2pden, param->EmcRw2Pden);
+ write32(&regs->txsr, param->EmcTxsr);
+ write32(&regs->txsrdll, param->EmcTxsrDll);
+ write32(&regs->tcke, param->EmcTcke);
+ write32(&regs->tckesr, param->EmcTckesr);
+ write32(&regs->tpd, param->EmcTpd);
+ write32(&regs->tfaw, param->EmcTfaw);
+ write32(&regs->trpab, param->EmcTrpab);
+ write32(&regs->tclkstable, param->EmcTClkStable);
+ write32(&regs->tclkstop, param->EmcTClkStop);
+ write32(&regs->trefbw, param->EmcTRefBw);
+ write32(&regs->odt_write, param->EmcOdtWrite);
+ write32(&regs->odt_read, param->EmcOdtRead);
+ write32(&regs->fbio_cfg6, param->EmcFbioCfg6);
+ write32(&regs->cfg_dig_dll, param->EmcCfgDigDll);
+ write32(&regs->cfg_dig_dll_period, param->EmcCfgDigDllPeriod);
/* Don't write bit 1: addr swizzle lock bit. Written at end of sequence. */
- writel(param->EmcFbioSpare & 0xfffffffd, &regs->fbio_spare);
-
- writel(param->EmcCfgRsv, &regs->cfg_rsv);
- writel(param->EmcDllXformDqs0, &regs->dll_xform_dqs0);
- writel(param->EmcDllXformDqs1, &regs->dll_xform_dqs1);
- writel(param->EmcDllXformDqs2, &regs->dll_xform_dqs2);
- writel(param->EmcDllXformDqs3, &regs->dll_xform_dqs3);
- writel(param->EmcDllXformDqs4, &regs->dll_xform_dqs4);
- writel(param->EmcDllXformDqs5, &regs->dll_xform_dqs5);
- writel(param->EmcDllXformDqs6, &regs->dll_xform_dqs6);
- writel(param->EmcDllXformDqs7, &regs->dll_xform_dqs7);
- writel(param->EmcDllXformDqs8, &regs->dll_xform_dqs8);
- writel(param->EmcDllXformDqs9, &regs->dll_xform_dqs9);
- writel(param->EmcDllXformDqs10, &regs->dll_xform_dqs10);
- writel(param->EmcDllXformDqs11, &regs->dll_xform_dqs11);
- writel(param->EmcDllXformDqs12, &regs->dll_xform_dqs12);
- writel(param->EmcDllXformDqs13, &regs->dll_xform_dqs13);
- writel(param->EmcDllXformDqs14, &regs->dll_xform_dqs14);
- writel(param->EmcDllXformDqs15, &regs->dll_xform_dqs15);
- writel(param->EmcDllXformQUse0, &regs->dll_xform_quse0);
- writel(param->EmcDllXformQUse1, &regs->dll_xform_quse1);
- writel(param->EmcDllXformQUse2, &regs->dll_xform_quse2);
- writel(param->EmcDllXformQUse3, &regs->dll_xform_quse3);
- writel(param->EmcDllXformQUse4, &regs->dll_xform_quse4);
- writel(param->EmcDllXformQUse5, &regs->dll_xform_quse5);
- writel(param->EmcDllXformQUse6, &regs->dll_xform_quse6);
- writel(param->EmcDllXformQUse7, &regs->dll_xform_quse7);
- writel(param->EmcDllXformQUse8, &regs->dll_xform_quse8);
- writel(param->EmcDllXformQUse9, &regs->dll_xform_quse9);
- writel(param->EmcDllXformQUse10, &regs->dll_xform_quse10);
- writel(param->EmcDllXformQUse11, &regs->dll_xform_quse11);
- writel(param->EmcDllXformQUse12, &regs->dll_xform_quse12);
- writel(param->EmcDllXformQUse13, &regs->dll_xform_quse13);
- writel(param->EmcDllXformQUse14, &regs->dll_xform_quse14);
- writel(param->EmcDllXformQUse15, &regs->dll_xform_quse15);
- writel(param->EmcDllXformDq0, &regs->dll_xform_dq0);
- writel(param->EmcDllXformDq1, &regs->dll_xform_dq1);
- writel(param->EmcDllXformDq2, &regs->dll_xform_dq2);
- writel(param->EmcDllXformDq3, &regs->dll_xform_dq3);
- writel(param->EmcDllXformDq4, &regs->dll_xform_dq4);
- writel(param->EmcDllXformDq5, &regs->dll_xform_dq5);
- writel(param->EmcDllXformDq6, &regs->dll_xform_dq6);
- writel(param->EmcDllXformDq7, &regs->dll_xform_dq7);
- writel(param->EmcDllXformAddr0, &regs->dll_xform_addr0);
- writel(param->EmcDllXformAddr1, &regs->dll_xform_addr1);
- writel(param->EmcDllXformAddr2, &regs->dll_xform_addr2);
- writel(param->EmcDllXformAddr3, &regs->dll_xform_addr3);
- writel(param->EmcDllXformAddr4, &regs->dll_xform_addr4);
- writel(param->EmcDllXformAddr5, &regs->dll_xform_addr5);
- writel(param->EmcAcpdControl, &regs->acpd_control);
- writel(param->EmcDsrVttgenDrv, &regs->dsr_vttgen_drv);
- writel(param->EmcTxdsrvttgen, &regs->txdsrvttgen);
- writel(param->EmcBgbiasCtl0, &regs->bgbias_ctl0);
+ write32(&regs->fbio_spare, param->EmcFbioSpare & 0xfffffffd);
+
+ write32(&regs->cfg_rsv, param->EmcCfgRsv);
+ write32(&regs->dll_xform_dqs0, param->EmcDllXformDqs0);
+ write32(&regs->dll_xform_dqs1, param->EmcDllXformDqs1);
+ write32(&regs->dll_xform_dqs2, param->EmcDllXformDqs2);
+ write32(&regs->dll_xform_dqs3, param->EmcDllXformDqs3);
+ write32(&regs->dll_xform_dqs4, param->EmcDllXformDqs4);
+ write32(&regs->dll_xform_dqs5, param->EmcDllXformDqs5);
+ write32(&regs->dll_xform_dqs6, param->EmcDllXformDqs6);
+ write32(&regs->dll_xform_dqs7, param->EmcDllXformDqs7);
+ write32(&regs->dll_xform_dqs8, param->EmcDllXformDqs8);
+ write32(&regs->dll_xform_dqs9, param->EmcDllXformDqs9);
+ write32(&regs->dll_xform_dqs10, param->EmcDllXformDqs10);
+ write32(&regs->dll_xform_dqs11, param->EmcDllXformDqs11);
+ write32(&regs->dll_xform_dqs12, param->EmcDllXformDqs12);
+ write32(&regs->dll_xform_dqs13, param->EmcDllXformDqs13);
+ write32(&regs->dll_xform_dqs14, param->EmcDllXformDqs14);
+ write32(&regs->dll_xform_dqs15, param->EmcDllXformDqs15);
+ write32(&regs->dll_xform_quse0, param->EmcDllXformQUse0);
+ write32(&regs->dll_xform_quse1, param->EmcDllXformQUse1);
+ write32(&regs->dll_xform_quse2, param->EmcDllXformQUse2);
+ write32(&regs->dll_xform_quse3, param->EmcDllXformQUse3);
+ write32(&regs->dll_xform_quse4, param->EmcDllXformQUse4);
+ write32(&regs->dll_xform_quse5, param->EmcDllXformQUse5);
+ write32(&regs->dll_xform_quse6, param->EmcDllXformQUse6);
+ write32(&regs->dll_xform_quse7, param->EmcDllXformQUse7);
+ write32(&regs->dll_xform_quse8, param->EmcDllXformQUse8);
+ write32(&regs->dll_xform_quse9, param->EmcDllXformQUse9);
+ write32(&regs->dll_xform_quse10, param->EmcDllXformQUse10);
+ write32(&regs->dll_xform_quse11, param->EmcDllXformQUse11);
+ write32(&regs->dll_xform_quse12, param->EmcDllXformQUse12);
+ write32(&regs->dll_xform_quse13, param->EmcDllXformQUse13);
+ write32(&regs->dll_xform_quse14, param->EmcDllXformQUse14);
+ write32(&regs->dll_xform_quse15, param->EmcDllXformQUse15);
+ write32(&regs->dll_xform_dq0, param->EmcDllXformDq0);
+ write32(&regs->dll_xform_dq1, param->EmcDllXformDq1);
+ write32(&regs->dll_xform_dq2, param->EmcDllXformDq2);
+ write32(&regs->dll_xform_dq3, param->EmcDllXformDq3);
+ write32(&regs->dll_xform_dq4, param->EmcDllXformDq4);
+ write32(&regs->dll_xform_dq5, param->EmcDllXformDq5);
+ write32(&regs->dll_xform_dq6, param->EmcDllXformDq6);
+ write32(&regs->dll_xform_dq7, param->EmcDllXformDq7);
+ write32(&regs->dll_xform_addr0, param->EmcDllXformAddr0);
+ write32(&regs->dll_xform_addr1, param->EmcDllXformAddr1);
+ write32(&regs->dll_xform_addr2, param->EmcDllXformAddr2);
+ write32(&regs->dll_xform_addr3, param->EmcDllXformAddr3);
+ write32(&regs->dll_xform_addr4, param->EmcDllXformAddr4);
+ write32(&regs->dll_xform_addr5, param->EmcDllXformAddr5);
+ write32(&regs->acpd_control, param->EmcAcpdControl);
+ write32(&regs->dsr_vttgen_drv, param->EmcDsrVttgenDrv);
+ write32(&regs->txdsrvttgen, param->EmcTxdsrvttgen);
+ write32(&regs->bgbias_ctl0, param->EmcBgbiasCtl0);
/*
* Set pipe bypass enable bits before sending any DRAM commands.
@@ -393,8 +396,8 @@ static void sdram_patch_bootrom(const struct sdram_params *param,
BOOT_ROM_PATCH_CONTROL_OFFSET_MASK) >>
BOOT_ROM_PATCH_CONTROL_OFFSET_SHIFT);
addr = BOOT_ROM_PATCH_CONTROL_BASE_ADDRESS + (addr << 2);
- writel(param->BootRomPatchData, (uint32_t *)addr);
- writel(1, &regs->timing_control);
+ write32((uint32_t *)addr, param->BootRomPatchData);
+ write32(&regs->timing_control, 1);
}
}
@@ -402,7 +405,7 @@ static void sdram_set_dpd3(const struct sdram_params *param,
struct tegra_pmc_regs *regs)
{
/* Program DPD request */
- writel(param->PmcIoDpd3Req, &regs->io_dpd3_req);
+ write32(&regs->io_dpd3_req, param->PmcIoDpd3Req);
udelay(param->PmcIoDpd3ReqWait);
}
@@ -410,27 +413,27 @@ static void sdram_set_dli_trims(const struct sdram_params *param,
struct tegra_emc_regs *regs)
{
/* Program DLI trims */
- writel(param->EmcDliTrimTxDqs0, &regs->dli_trim_txdqs0);
- writel(param->EmcDliTrimTxDqs1, &regs->dli_trim_txdqs1);
- writel(param->EmcDliTrimTxDqs2, &regs->dli_trim_txdqs2);
- writel(param->EmcDliTrimTxDqs3, &regs->dli_trim_txdqs3);
- writel(param->EmcDliTrimTxDqs4, &regs->dli_trim_txdqs4);
- writel(param->EmcDliTrimTxDqs5, &regs->dli_trim_txdqs5);
- writel(param->EmcDliTrimTxDqs6, &regs->dli_trim_txdqs6);
- writel(param->EmcDliTrimTxDqs7, &regs->dli_trim_txdqs7);
- writel(param->EmcDliTrimTxDqs8, &regs->dli_trim_txdqs8);
- writel(param->EmcDliTrimTxDqs9, &regs->dli_trim_txdqs9);
- writel(param->EmcDliTrimTxDqs10, &regs->dli_trim_txdqs10);
- writel(param->EmcDliTrimTxDqs11, &regs->dli_trim_txdqs11);
- writel(param->EmcDliTrimTxDqs12, &regs->dli_trim_txdqs12);
- writel(param->EmcDliTrimTxDqs13, &regs->dli_trim_txdqs13);
- writel(param->EmcDliTrimTxDqs14, &regs->dli_trim_txdqs14);
- writel(param->EmcDliTrimTxDqs15, &regs->dli_trim_txdqs15);
-
- writel(param->EmcCaTrainingTimingCntl1,
- &regs->ca_training_timing_cntl1);
- writel(param->EmcCaTrainingTimingCntl2,
- &regs->ca_training_timing_cntl2);
+ write32(&regs->dli_trim_txdqs0, param->EmcDliTrimTxDqs0);
+ write32(&regs->dli_trim_txdqs1, param->EmcDliTrimTxDqs1);
+ write32(&regs->dli_trim_txdqs2, param->EmcDliTrimTxDqs2);
+ write32(&regs->dli_trim_txdqs3, param->EmcDliTrimTxDqs3);
+ write32(&regs->dli_trim_txdqs4, param->EmcDliTrimTxDqs4);
+ write32(&regs->dli_trim_txdqs5, param->EmcDliTrimTxDqs5);
+ write32(&regs->dli_trim_txdqs6, param->EmcDliTrimTxDqs6);
+ write32(&regs->dli_trim_txdqs7, param->EmcDliTrimTxDqs7);
+ write32(&regs->dli_trim_txdqs8, param->EmcDliTrimTxDqs8);
+ write32(&regs->dli_trim_txdqs9, param->EmcDliTrimTxDqs9);
+ write32(&regs->dli_trim_txdqs10, param->EmcDliTrimTxDqs10);
+ write32(&regs->dli_trim_txdqs11, param->EmcDliTrimTxDqs11);
+ write32(&regs->dli_trim_txdqs12, param->EmcDliTrimTxDqs12);
+ write32(&regs->dli_trim_txdqs13, param->EmcDliTrimTxDqs13);
+ write32(&regs->dli_trim_txdqs14, param->EmcDliTrimTxDqs14);
+ write32(&regs->dli_trim_txdqs15, param->EmcDliTrimTxDqs15);
+
+ write32(&regs->ca_training_timing_cntl1,
+ param->EmcCaTrainingTimingCntl1);
+ write32(&regs->ca_training_timing_cntl2,
+ param->EmcCaTrainingTimingCntl2);
sdram_trigger_emc_timing_update(regs);
udelay(param->EmcTimingControlWait);
@@ -446,7 +449,7 @@ static void sdram_set_clock_enable_signal(const struct sdram_params *param,
* Assert dummy read of PIN register to ensure above write to PIN
* register went through. 200 is the recommended value by NVIDIA.
*/
- dummy |= readl(&regs->pin);
+ dummy |= read32(&regs->pin);
udelay(200 + param->EmcPinExtraWait);
/* Deassert reset */
@@ -455,7 +458,7 @@ static void sdram_set_clock_enable_signal(const struct sdram_params *param,
* Assert dummy read of PIN register to ensure above write to PIN
* register went through. 200 is the recommended value by NVIDIA.
*/
- dummy |= readl(&regs->pin);
+ dummy |= read32(&regs->pin);
udelay(500 + param->EmcPinExtraWait);
/* Enable clock enable signal */
@@ -464,7 +467,7 @@ static void sdram_set_clock_enable_signal(const struct sdram_params *param,
* Assert dummy read of PIN register to ensure above write to PIN
* register went through. 200 is the recommended value by NVIDIA.
*/
- dummy |= readl(&regs->pin);
+ dummy |= read32(&regs->pin);
udelay(param->EmcPinProgramWait);
if (!dummy) {
@@ -478,13 +481,13 @@ static void sdram_set_clock_enable_signal(const struct sdram_params *param,
EMC_NOP_NOP_CMD_MASK | EMC_NOP_NOP_DEV_SELECTN_MASK);
/* Write mode registers */
- writel(param->EmcEmrs2, &regs->emrs2);
- writel(param->EmcEmrs3, &regs->emrs3);
- writel(param->EmcEmrs, &regs->emrs);
- writel(param->EmcMrs, &regs->mrs);
+ write32(&regs->emrs2, param->EmcEmrs2);
+ write32(&regs->emrs3, param->EmcEmrs3);
+ write32(&regs->emrs, param->EmcEmrs);
+ write32(&regs->mrs, param->EmcMrs);
if (param->EmcExtraModeRegWriteEnable) {
- writel(param->EmcMrwExtra, &regs->mrs);
+ write32(&regs->mrs, param->EmcMrwExtra);
}
}
@@ -494,11 +497,11 @@ static void sdram_init_zq_calibration(const struct sdram_params *param,
if ((param->EmcZcalWarmColdBootEnables &
EMC_ZCAL_WARM_COLD_BOOT_ENABLES_COLDBOOT_MASK) == 1) {
/* Need to initialize ZCAL on coldboot. */
- writel(param->EmcZcalInitDev0, &regs->zq_cal);
+ write32(&regs->zq_cal, param->EmcZcalInitDev0);
udelay(param->EmcZcalInitWait);
if ((param->EmcDevSelect & 2) == 0) {
- writel(param->EmcZcalInitDev1, &regs->zq_cal);
+ write32(&regs->zq_cal, param->EmcZcalInitDev1);
udelay(param->EmcZcalInitWait);
}
} else {
@@ -510,9 +513,9 @@ static void sdram_set_zq_calibration(const struct sdram_params *param,
struct tegra_emc_regs *regs)
{
/* Start periodic ZQ calibration */
- writel(param->EmcZcalInterval, &regs->zcal_interval);
- writel(param->EmcZcalWaitCnt, &regs->zcal_wait_cnt);
- writel(param->EmcZcalMrwCmd, &regs->zcal_mrw_cmd);
+ write32(&regs->zcal_interval, param->EmcZcalInterval);
+ write32(&regs->zcal_wait_cnt, param->EmcZcalWaitCnt);
+ write32(&regs->zcal_mrw_cmd, param->EmcZcalMrwCmd);
}
static void sdram_set_refresh(const struct sdram_params *param,
@@ -530,15 +533,15 @@ static void sdram_set_refresh(const struct sdram_params *param,
}
/* Enable refresh */
- writel((param->EmcDevSelect | EMC_REFCTRL_REF_VALID_ENABLED),
- &regs->refctrl);
+ write32(&regs->refctrl,
+ (param->EmcDevSelect | EMC_REFCTRL_REF_VALID_ENABLED));
- writel(param->EmcDynSelfRefControl, &regs->dyn_self_ref_control);
- writel(param->EmcCfg, &regs->cfg);
- writel(param->EmcSelDpdCtrl, &regs->sel_dpd_ctrl);
+ write32(&regs->dyn_self_ref_control, param->EmcDynSelfRefControl);
+ write32(&regs->cfg, param->EmcCfg);
+ write32(&regs->sel_dpd_ctrl, param->EmcSelDpdCtrl);
/* Write addr swizzle lock bit */
- writel(param->EmcFbioSpare, &regs->fbio_spare);
+ write32(&regs->fbio_spare, param->EmcFbioSpare);
/* Re-trigger timing to latch power saving functions */
sdram_trigger_emc_timing_update(regs);
@@ -556,12 +559,13 @@ static void sdram_lock_carveouts(const struct sdram_params *param,
struct tegra_mc_regs *regs)
{
/* Lock carveouts, and emem_cfg registers */
- writel(param->McVideoProtectWriteAccess, &regs->video_protect_reg_ctrl);
- writel(MC_EMEM_CFG_ACCESS_CTRL_WRITE_ACCESS_DISABLED,
- &regs->emem_cfg_access_ctrl);
- writel(param->McSecCarveoutProtectWriteAccess,
- &regs->sec_carveout_reg_ctrl);
- writel(param->McMtsCarveoutRegCtrl, &regs->mts_carveout_reg_ctrl);
+ write32(&regs->video_protect_reg_ctrl,
+ param->McVideoProtectWriteAccess);
+ write32(&regs->emem_cfg_access_ctrl,
+ MC_EMEM_CFG_ACCESS_CTRL_WRITE_ACCESS_DISABLED);
+ write32(&regs->sec_carveout_reg_ctrl,
+ param->McSecCarveoutProtectWriteAccess);
+ write32(&regs->mts_carveout_reg_ctrl, param->McMtsCarveoutRegCtrl);
}
void sdram_init(const struct sdram_params *param)
@@ -616,7 +620,7 @@ void sdram_init(const struct sdram_params *param)
uint32_t sdram_get_ram_code(void)
{
struct tegra_pmc_regs *pmc = (struct tegra_pmc_regs*)TEGRA_PMC_BASE;
- return ((readl(&pmc->strapping_opt_a) &
+ return ((read32(&pmc->strapping_opt_a) &
PMC_STRAPPING_OPT_A_RAM_CODE_MASK) >>
PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT);
}
diff --git a/src/soc/nvidia/tegra124/spi.c b/src/soc/nvidia/tegra124/spi.c
index 0584177d5e..e1d022a420 100644
--- a/src/soc/nvidia/tegra124/spi.c
+++ b/src/soc/nvidia/tegra124/spi.c
@@ -230,7 +230,7 @@ int spi_claim_bus(struct spi_slave *slave)
else
val |= SPI_CMD1_CS_SW_VAL;
- writel(val, &regs->command1);
+ write32(&regs->command1, val);
return 0;
}
@@ -246,7 +246,7 @@ void spi_release_bus(struct spi_slave *slave)
else
val &= ~SPI_CMD1_CS_SW_VAL;
- writel(val, &regs->command1);
+ write32(&regs->command1, val);
}
static void dump_fifo_status(struct tegra_spi_channel *spi)
@@ -383,12 +383,12 @@ static int tegra_spi_pio_prepare(struct tegra_spi_channel *spi,
/* BLOCK_SIZE in SPI_DMA_BLK register applies to both DMA and
* PIO transfers */
- writel(todo - 1, &spi->regs->dma_blk);
+ write32(&spi->regs->dma_blk, todo - 1);
if (dir == SPI_SEND) {
unsigned int to_fifo = bytes;
while (to_fifo) {
- writel(*p, &spi->regs->tx_fifo);
+ write32(&spi->regs->tx_fifo, *p);
p++;
to_fifo--;
}
@@ -493,11 +493,12 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi,
/* ensure bytes to send will be visible to DMA controller */
dcache_clean_by_mva(spi->out_buf, bytes);
- writel((u32)&spi->regs->tx_fifo, &spi->dma_out->regs->apb_ptr);
- writel((u32)spi->out_buf, &spi->dma_out->regs->ahb_ptr);
+ write32(&spi->dma_out->regs->apb_ptr,
+ (u32)&spi->regs->tx_fifo);
+ write32(&spi->dma_out->regs->ahb_ptr, (u32)spi->out_buf);
setbits_le32(&spi->dma_out->regs->csr, APB_CSR_DIR);
setup_dma_params(spi, spi->dma_out);
- writel(wcount, &spi->dma_out->regs->wcount);
+ write32(&spi->dma_out->regs->wcount, wcount);
} else {
spi->dma_in = dma_claim();
if (!spi->dma_in)
@@ -506,15 +507,15 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi,
/* avoid data collisions */
dcache_clean_invalidate_by_mva(spi->in_buf, bytes);
- writel((u32)&spi->regs->rx_fifo, &spi->dma_in->regs->apb_ptr);
- writel((u32)spi->in_buf, &spi->dma_in->regs->ahb_ptr);
+ write32(&spi->dma_in->regs->apb_ptr, (u32)&spi->regs->rx_fifo);
+ write32(&spi->dma_in->regs->ahb_ptr, (u32)spi->in_buf);
clrbits_le32(&spi->dma_in->regs->csr, APB_CSR_DIR);
setup_dma_params(spi, spi->dma_in);
- writel(wcount, &spi->dma_in->regs->wcount);
+ write32(&spi->dma_in->regs->wcount, wcount);
}
/* BLOCK_SIZE starts at n-1 */
- writel(todo - 1, &spi->regs->dma_blk);
+ write32(&spi->regs->dma_blk, todo - 1);
return todo;
}
diff --git a/src/soc/nvidia/tegra124/uart.c b/src/soc/nvidia/tegra124/uart.c
index 26aec20030..70fafee83e 100644
--- a/src/soc/nvidia/tegra124/uart.c
+++ b/src/soc/nvidia/tegra124/uart.c
@@ -56,19 +56,19 @@ static void tegra124_uart_init(struct tegra124_uart *uart_ptr)
tegra124_uart_tx_flush(uart_ptr);
// Disable interrupts.
- writeb(0, &uart_ptr->ier);
+ write8(&uart_ptr->ier, 0);
// Force DTR and RTS to high.
- writeb(UART8250_MCR_DTR | UART8250_MCR_RTS, &uart_ptr->mcr);
+ write8(&uart_ptr->mcr, UART8250_MCR_DTR | UART8250_MCR_RTS);
// Set line configuration, access divisor latches.
- writeb(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr);
+ write8(&uart_ptr->lcr, UART8250_LCR_DLAB | line_config);
// Set the divisor.
- writeb(divisor & 0xff, &uart_ptr->dll);
- writeb((divisor >> 8) & 0xff, &uart_ptr->dlm);
+ write8(&uart_ptr->dll, divisor & 0xff);
+ write8(&uart_ptr->dlm, (divisor >> 8) & 0xff);
// Hide the divisor latches.
- writeb(line_config, &uart_ptr->lcr);
+ write8(&uart_ptr->lcr, line_config);
// Enable FIFOs, and clear receive and transmit.
- writeb(UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT,
- &uart_ptr->fcr);
+ write8(&uart_ptr->fcr,
+ UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT);
}
static unsigned char tegra124_uart_rx_byte(struct tegra124_uart *uart_ptr)
@@ -81,7 +81,7 @@ static unsigned char tegra124_uart_rx_byte(struct tegra124_uart *uart_ptr)
static void tegra124_uart_tx_byte(struct tegra124_uart *uart_ptr, unsigned char data)
{
while (!(read8(&uart_ptr->lsr) & UART8250_LSR_THRE));
- writeb(data, &uart_ptr->thr);
+ write8(&uart_ptr->thr, data);
}
static void tegra124_uart_tx_flush(struct tegra124_uart *uart_ptr)
diff --git a/src/soc/nvidia/tegra132/addressmap.c b/src/soc/nvidia/tegra132/addressmap.c
index 377d083e02..5940db7067 100644
--- a/src/soc/nvidia/tegra132/addressmap.c
+++ b/src/soc/nvidia/tegra132/addressmap.c
@@ -187,9 +187,9 @@ void trustzone_region_init(void)
return;
/* Set the carveout region. */
- writel(tz_base_mib << 20, &mc->security_cfg0);
- writel(tz_size_mib, &mc->security_cfg1);
+ write32(&mc->security_cfg0, tz_base_mib << 20);
+ write32(&mc->security_cfg1, tz_size_mib);
/* Enable SMMU translations */
- writel(MC_SMMU_CONFIG_ENABLE, &mc->smmu_config);
+ write32(&mc->smmu_config, MC_SMMU_CONFIG_ENABLE);
}
diff --git a/src/soc/nvidia/tegra132/bootblock.c b/src/soc/nvidia/tegra132/bootblock.c
index 6fd36eb2bd..317ab4a1f6 100644
--- a/src/soc/nvidia/tegra132/bootblock.c
+++ b/src/soc/nvidia/tegra132/bootblock.c
@@ -46,7 +46,7 @@ static void save_odmdata(void)
bct_offset = read32((void *)(TEGRA_SRAM_BASE + BCT_OFFSET_IN_BIT));
if (bct_offset > TEGRA_SRAM_BASE && bct_offset < TEGRA_SRAM_MAX) {
odmdata = read32((void *)(bct_offset + ODMDATA_OFFSET_IN_BCT));
- writel(odmdata, &pmc->odmdata);
+ write32(&pmc->odmdata, odmdata);
}
}
diff --git a/src/soc/nvidia/tegra132/ccplex.c b/src/soc/nvidia/tegra132/ccplex.c
index 1cc59add84..f9356a91bc 100644
--- a/src/soc/nvidia/tegra132/ccplex.c
+++ b/src/soc/nvidia/tegra132/ccplex.c
@@ -46,12 +46,12 @@ static int ccplex_start(void)
struct tegra_pmc_regs * const pmc = PMC_REGS;
/* Set the handshake bit to be knocked down. */
- writel(handshake_mask, &pmc->scratch118);
+ write32(&pmc->scratch118, handshake_mask);
/* Assert nCXRSET[1] */
reg = read32(CLK_RST_REG(rst_cpu_cmplx_set));
reg |= cxreset1_mask;
- writel(reg, CLK_RST_REG(rst_cpu_cmplx_set));
+ write32(CLK_RST_REG(rst_cpu_cmplx_set), reg);
stopwatch_init_msecs_expire(&sw, timeout_ms);
while (1) {
@@ -140,14 +140,14 @@ static void request_ram_repair(void)
/* Perform cluster 0 ram repair */
reg = read32(&flow->ram_repair);
reg |= req;
- writel(reg, &flow->ram_repair);
+ write32(&flow->ram_repair, reg);
while ((read32(&flow->ram_repair) & sts) != sts)
;
/* Perform cluster 1 ram repair */
reg = read32(&flow->ram_repair_cluster1);
reg |= req;
- writel(reg, &flow->ram_repair_cluster1);
+ write32(&flow->ram_repair_cluster1, reg);
while ((read32(&flow->ram_repair_cluster1) & sts) != sts)
;
@@ -169,11 +169,11 @@ void ccplex_cpu_prepare(void)
static void start_common_clocks(void)
{
/* Clear fast CPU partition reset. */
- writel(CRC_RST_CPUG_CLR_NONCPU, CLK_RST_REG(rst_cpug_cmplx_clr));
+ write32(CLK_RST_REG(rst_cpug_cmplx_clr), CRC_RST_CPUG_CLR_NONCPU);
/* Clear reset of L2 and CoreSight components. */
- writel(CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG,
- CLK_RST_REG(rst_cpug_cmplx_clr));
+ write32(CLK_RST_REG(rst_cpug_cmplx_clr),
+ CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG);
}
void ccplex_cpu_start(void *entry_addr)
diff --git a/src/soc/nvidia/tegra132/clock.c b/src/soc/nvidia/tegra132/clock.c
index 4cd8a5886d..c13a086501 100644
--- a/src/soc/nvidia/tegra132/clock.c
+++ b/src/soc/nvidia/tegra132/clock.c
@@ -163,7 +163,7 @@ struct {
*/
static u32 clock_get_osc_bits(void)
{
- return (readl(CLK_RST_REG(osc_ctrl)) & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+ return (read32(CLK_RST_REG(osc_ctrl)) & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
}
int clock_get_osc_khz(void)
@@ -173,7 +173,7 @@ int clock_get_osc_khz(void)
int clock_get_pll_input_khz(void)
{
- u32 osc_ctrl = readl(CLK_RST_REG(osc_ctrl));
+ u32 osc_ctrl = read32(CLK_RST_REG(osc_ctrl));
u32 osc_bits = (osc_ctrl & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
u32 pll_ref_div = (osc_ctrl & OSC_PREDIV_MASK) >> OSC_PREDIV_SHIFT;
return osc_table[osc_bits].khz >> pll_ref_div;
@@ -186,11 +186,11 @@ void clock_init_arm_generic_timer(void)
set_cntfrq(freq);
/* Record the system timer frequency. */
- writel(freq, &sysctr->cntfid0);
+ write32(&sysctr->cntfid0, freq);
/* Enable the system counter. */
uint32_t cntcr = read32(&sysctr->cntcr);
cntcr |= SYSCTR_CNTCR_EN | SYSCTR_CNTCR_HDBG;
- writel(cntcr, &sysctr->cntcr);
+ write32(&sysctr->cntcr, cntcr);
}
#define SOR0_CLK_SEL0 (1 << 14)
@@ -221,18 +221,18 @@ static void init_pll(u32 *base, u32 *misc, const union pll_fields pll, u32 lock)
pll.div.lfcon << PLL_MISC_LFCON_SHIFT;
/* Write dividers but BYPASS the PLL while we're messing with it. */
- writel(dividers | PLL_BASE_BYPASS, base);
+ write32(base, dividers | PLL_BASE_BYPASS);
/*
* Set Lock bit, CPCON and LFCON fields (default to 0 if it doesn't
* exist for this PLL)
*/
- writel(lock | misc_con, misc);
+ write32(misc, lock | misc_con);
/* Enable PLL and take it back out of BYPASS */
- writel(dividers | PLL_BASE_ENABLE, base);
+ write32(base, dividers | PLL_BASE_ENABLE);
/* Wait for lock ready */
- while (!(readl(base) & PLL_BASE_LOCK));
+ while (!(read32(base) & PLL_BASE_LOCK));
}
static void init_utmip_pll(void)
@@ -243,14 +243,14 @@ static void init_utmip_pll(void)
clrbits_le32(CLK_RST_REG(utmip_pll_cfg2), 1 << 30); /* PHY_XTAL_CLKEN */
udelay(1);
- writel(80 << 16 | 1 << 8 | 0, CLK_RST_REG(utmip_pll_cfg0));/* 960MHz * 1 / 80 == 12 MHz */
+ write32(CLK_RST_REG(utmip_pll_cfg0), 80 << 16 | 1 << 8 | 0);/* 960MHz * 1 / 80 == 12 MHz */
- writel(div_round_up(khz, 8000) << 27 | 0 << 16 | 0 << 14 | 0 << 12 | div_round_up(khz, 102) << 0 | 0,
- CLK_RST_REG(utmip_pll_cfg1));
+ write32(CLK_RST_REG(utmip_pll_cfg1),
+ div_round_up(khz, 8000) << 27 | 0 << 16 | 0 << 14 | 0 << 12 | div_round_up(khz, 102) << 0 | 0);
/* TODO: TRM can't decide if actv is 5us or 10us, keep an eye on it */
- writel(0 << 24 | div_round_up(khz, 3200) << 18 | div_round_up(khz, 256) << 6 | 0 << 4 | 0 << 2 | 0 << 0 | 0,
- CLK_RST_REG(utmip_pll_cfg2));
+ write32(CLK_RST_REG(utmip_pll_cfg2),
+ 0 << 24 | div_round_up(khz, 3200) << 18 | div_round_up(khz, 256) << 6 | 0 << 4 | 0 << 2 | 0 << 0 | 0);
setbits_le32(CLK_RST_REG(utmip_pll_cfg2), 1 << 30); /* PHY_XTAL_CLKEN */
}
@@ -274,12 +274,12 @@ static void graphics_pll(void)
* that it is needed.
*/
u32 scfg = (1 << 28) | (1 << 24) | (1 << 22);
- writel(scfg, cfg);
+ write32(cfg, scfg);
init_pll(CLK_RST_REG(plldp_base), CLK_RST_REG(plldp_misc),
osc_table[osc].plldp, PLLDPD2_MISC_LOCK_ENABLE);
/* leave dither and undoc bits set, release clamp */
scfg = (1<<28) | (1<<24);
- writel(scfg, cfg);
+ write32(cfg, scfg);
}
/*
@@ -387,8 +387,8 @@ u32 clock_configure_plld(u32 frequency)
* been determined through trial and error (must lead to div 13 at 24MHz). */
void clock_early_uart(void)
{
- writel(CLK_SRC_DEV_ID(UARTA, CLK_M) << CLK_SOURCE_SHIFT | CLK_UART_DIV_OVERRIDE | CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900),
- CLK_RST_REG(clk_src_uarta));
+ write32(CLK_RST_REG(clk_src_uarta),
+ CLK_SRC_DEV_ID(UARTA, CLK_M) << CLK_SOURCE_SHIFT | CLK_UART_DIV_OVERRIDE | CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900));
clock_enable_clear_reset_l(CLK_L_UARTA);
}
@@ -437,22 +437,22 @@ void clock_sdram(u32 m, u32 n, u32 p, u32 setup, u32 ph45, u32 ph90,
* values after coldboot reset).
*/
- writel(misc1, CLK_RST_REG(pllm_misc1));
- writel(misc2, CLK_RST_REG(pllm_misc2));
+ write32(CLK_RST_REG(pllm_misc1), misc1);
+ write32(CLK_RST_REG(pllm_misc2), misc2);
/* PLLM.BASE needs BYPASS=0, different from general init_pll */
- base = readl(CLK_RST_REG(pllm_base));
+ base = read32(CLK_RST_REG(pllm_base));
base &= ~(PLLCMX_BASE_DIVN_MASK | PLLCMX_BASE_DIVM_MASK |
PLLM_BASE_DIVP_MASK | PLL_BASE_BYPASS);
base |= ((m << PLL_BASE_DIVM_SHIFT) | (n << PLL_BASE_DIVN_SHIFT) |
(p << PLL_BASE_DIVP_SHIFT));
- writel(base, CLK_RST_REG(pllm_base));
+ write32(CLK_RST_REG(pllm_base), base);
setbits_le32(CLK_RST_REG(pllm_base), PLL_BASE_ENABLE);
/* stable_time is required, before we can start to check lock. */
udelay(stable_time);
- while (!(readl(CLK_RST_REG(pllm_base)) & PLL_BASE_LOCK))
+ while (!(read32(CLK_RST_REG(pllm_base)) & PLL_BASE_LOCK))
udelay(1);
/*
@@ -466,7 +466,7 @@ void clock_sdram(u32 m, u32 n, u32 p, u32 setup, u32 ph45, u32 ph90,
/* Enable and start MEM(MC) and EMC. */
clock_enable_clear_reset(0, CLK_H_MEM | CLK_H_EMC, 0, 0, 0, 0);
- writel(emc_source, CLK_RST_REG(clk_src_emc));
+ write32(CLK_RST_REG(clk_src_emc), emc_source);
udelay(IO_STABILIZATION_DELAY);
}
@@ -477,9 +477,9 @@ void clock_cpu0_config(void)
u32 timeout = 0;
/* disable IDDQ */
- reg = readl(&clst_clk->pllx_misc3);
+ reg = read32(&clst_clk->pllx_misc3);
reg &= ~PLLX_IDDQ;
- writel(reg, &clst_clk->pllx_misc3);
+ write32(&clst_clk->pllx_misc3, reg);
/* init pllx */
init_pll(&clst_clk->pllx_base, &clst_clk->pllx_misc,
@@ -490,9 +490,9 @@ void clock_cpu0_config(void)
* when above pllx programming has taken effect.
*/
do {
- if (readl(&clst_clk->misc_ctrl) & CLK_SWITCH_MATCH) {
- writel((CC_CCLK_BRST_POL_PLLX_OUT0_LJ << 28),
- &clst_clk->cclk_brst_pol);
+ if (read32(&clst_clk->misc_ctrl) & CLK_SWITCH_MATCH) {
+ write32(&clst_clk->cclk_brst_pol,
+ (CC_CCLK_BRST_POL_PLLX_OUT0_LJ << 28));
break;
}
@@ -512,8 +512,8 @@ void clock_cpu0_config(void)
void clock_halt_avp(void)
{
for (;;)
- writel(FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ | FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT,
- &flow->halt_cop_events);
+ write32(&flow->halt_cop_events,
+ FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ | FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT);
}
void clock_init(void)
@@ -521,7 +521,7 @@ void clock_init(void)
u32 osc = clock_get_osc_bits();
/* Set PLLC dynramp_step A to 0x2b and B to 0xb (from U-Boot -- why? */
- writel(0x2b << 17 | 0xb << 9, CLK_RST_REG(pllc_misc2));
+ write32(CLK_RST_REG(pllc_misc2), 0x2b << 17 | 0xb << 9);
/* Max out the AVP clock before everything else (need PLLC for that). */
init_pll(CLK_RST_REG(pllc_base), CLK_RST_REG(pllc_misc),
@@ -529,12 +529,12 @@ void clock_init(void)
/* Typical ratios are 1:2:2 or 1:2:3 sclk:hclk:pclk (See: APB DMA
* features section in the TRM). */
- writel(1 << HCLK_DIVISOR_SHIFT | 0 << PCLK_DIVISOR_SHIFT,
- CLK_RST_REG(clk_sys_rate)); /* pclk = hclk = sclk/2 */
- writel(CLK_DIVIDER(TEGRA_PLLC_KHZ, 300000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN | PLL_OUT_RSTN,
- CLK_RST_REG(pllc_out));
- writel(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT,
- CLK_RST_REG(sclk_brst_pol)); /* sclk = 300 MHz */
+ write32(CLK_RST_REG(clk_sys_rate),
+ 1 << HCLK_DIVISOR_SHIFT | 0 << PCLK_DIVISOR_SHIFT); /* pclk = hclk = sclk/2 */
+ write32(CLK_RST_REG(pllc_out),
+ CLK_DIVIDER(TEGRA_PLLC_KHZ, 300000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN | PLL_OUT_RSTN);
+ write32(CLK_RST_REG(sclk_brst_pol),
+ SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT); /* sclk = 300 MHz */
/* Change the oscillator drive strength (from U-Boot -- why?) */
clrsetbits_le32(CLK_RST_REG(osc_ctrl), OSC_XOFS_MASK,
@@ -549,10 +549,10 @@ void clock_init(void)
OSC_DRIVE_STRENGTH << PMC_OSC_EDPD_OVER_XOFS_SHIFT);
/* Set up PLLP_OUT(1|2|3|4) divisor to generate (9.6|48|102|204)MHz */
- writel((CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT,
- CLK_RST_REG(pllp_outa));
- writel((CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT,
- CLK_RST_REG(pllp_outb));
+ write32(CLK_RST_REG(pllp_outa),
+ (CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT);
+ write32(CLK_RST_REG(pllp_outb),
+ (CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT);
/* init pllu */
init_pll(CLK_RST_REG(pllu_base), CLK_RST_REG(pllu_misc),
@@ -565,9 +565,9 @@ void clock_init(void)
void clock_grp_enable_clear_reset(u32 val, u32* clk_enb_set_reg,
u32 *rst_dev_clr_reg)
{
- writel(val, clk_enb_set_reg);
+ write32(clk_enb_set_reg, val);
udelay(IO_STABILIZATION_DELAY);
- writel(val, rst_dev_clr_reg);
+ write32(rst_dev_clr_reg, val);
}
static u32 * const clk_enb_set_arr[DEV_CONFIG_BLOCKS] = {
@@ -613,7 +613,7 @@ static void clock_write_regs(u32 * const regs[DEV_CONFIG_BLOCKS],
for (; i < DEV_CONFIG_BLOCKS; i++)
if (bits[i])
- writel(bits[i], regs[i]);
+ write32(regs[i], bits[i]);
}
void clock_enable_regs(u32 bits[DEV_CONFIG_BLOCKS])
@@ -648,9 +648,9 @@ void clock_enable_clear_reset(u32 l, u32 h, u32 u, u32 v, u32 w, u32 x)
static void clock_reset_dev(u32 *setaddr, u32 *clraddr, u32 bit)
{
- writel(bit, setaddr);
+ write32(setaddr, bit);
udelay(LOGIC_STABILIZATION_DELAY);
- writel(bit, clraddr);
+ write32(clraddr, bit);
}
void clock_reset_l(u32 bit)
diff --git a/src/soc/nvidia/tegra132/cpu.c b/src/soc/nvidia/tegra132/cpu.c
index 8cd2c0faea..b6f0cfec11 100644
--- a/src/soc/nvidia/tegra132/cpu.c
+++ b/src/soc/nvidia/tegra132/cpu.c
@@ -40,15 +40,15 @@ static void enable_core_clocks(int cpu)
/* Clear reset of CPU components. */
if (cpu == 0)
- writel(cpu0_clocks, CLK_RST_REG(rst_cpug_cmplx_clr));
+ write32(CLK_RST_REG(rst_cpug_cmplx_clr), cpu0_clocks);
else
- writel(cpu1_clocks, CLK_RST_REG(rst_cpug_cmplx_clr));
+ write32(CLK_RST_REG(rst_cpug_cmplx_clr), cpu1_clocks);
}
static void set_armv8_32bit_reset_vector(uintptr_t entry)
{
void * const evp_cpu_reset_vector = EVP_CPU_RESET_VECTOR;
- writel(entry, evp_cpu_reset_vector);
+ write32(evp_cpu_reset_vector, entry);
}
static void set_armv8_64bit_reset_vector(uintptr_t entry)
@@ -56,8 +56,8 @@ static void set_armv8_64bit_reset_vector(uintptr_t entry)
struct tegra_pmc_regs * const pmc = PMC_REGS;
/* Currently assume 32-bit addresses only. */
- writel(entry, &pmc->secure_scratch34);
- writel(0, &pmc->secure_scratch35);
+ write32(&pmc->secure_scratch34, entry);
+ write32(&pmc->secure_scratch35, 0);
}
void cpu_prepare_startup(void *entry_64)
diff --git a/src/soc/nvidia/tegra132/dc.c b/src/soc/nvidia/tegra132/dc.c
index a3ba9e6fe7..07eac2e687 100644
--- a/src/soc/nvidia/tegra132/dc.c
+++ b/src/soc/nvidia/tegra132/dc.c
@@ -38,7 +38,7 @@ unsigned long READL(void * p)
if (dump > 1)
printk(BIOS_SPEW, "readl %p\n", p);
- value = readl(p);
+ value = read32(p);
if (dump)
printk(BIOS_SPEW, "readl %p %08lx\n", p, value);
return value;
@@ -48,7 +48,7 @@ void WRITEL(unsigned long value, void * p)
{
if (dump)
printk(BIOS_SPEW, "writel %p %08lx\n", p, value);
- writel(value, p);
+ write32(p, value);
}
/* return in 1000ths of a Hertz */
diff --git a/src/soc/nvidia/tegra132/dsi.c b/src/soc/nvidia/tegra132/dsi.c
index 8508b6666d..1af24e140c 100644
--- a/src/soc/nvidia/tegra132/dsi.c
+++ b/src/soc/nvidia/tegra132/dsi.c
@@ -869,7 +869,7 @@ static int dsi_enable(struct soc_nvidia_tegra132_config *config)
tegra_output_dsi_setup_clock(dsi_a, config);
/* configure APB_MISC_GP_MIPI_PAD_CTRL_0 */
- writel(DSIB_MODE_DSI, (unsigned int *)APB_MISC_GP_MIPI_PAD_CTRL_0);
+ write32((unsigned int *)APB_MISC_GP_MIPI_PAD_CTRL_0, DSIB_MODE_DSI);
/* configure phy interface timing registers */
tegra_dsi_set_phy_timing(dsi_a);
diff --git a/src/soc/nvidia/tegra132/flow_ctrl.c b/src/soc/nvidia/tegra132/flow_ctrl.c
index 6d7d11590c..213dca2779 100644
--- a/src/soc/nvidia/tegra132/flow_ctrl.c
+++ b/src/soc/nvidia/tegra132/flow_ctrl.c
@@ -62,14 +62,14 @@ static uint32_t flowctrl_read_cpu_csr(int cpu)
static void flowctrl_write_cpu_csr(int cpu, uint32_t val)
{
- writel(val, tegra_flowctrl_base + flowctrl_offset_cpu_csr[cpu]);
- val = readl(tegra_flowctrl_base + flowctrl_offset_cpu_csr[cpu]);
+ write32(tegra_flowctrl_base + flowctrl_offset_cpu_csr[cpu], val);
+ val = read32(tegra_flowctrl_base + flowctrl_offset_cpu_csr[cpu]);
}
void flowctrl_write_cpu_halt(int cpu, uint32_t val)
{
- writel(val, tegra_flowctrl_base + flowctrl_offset_halt_cpu[cpu]);
- val = readl(tegra_flowctrl_base + flowctrl_offset_halt_cpu[cpu]);
+ write32(tegra_flowctrl_base + flowctrl_offset_halt_cpu[cpu], val);
+ val = read32(tegra_flowctrl_base + flowctrl_offset_halt_cpu[cpu]);
}
static void flowctrl_prepare_cpu_off(int cpu)
diff --git a/src/soc/nvidia/tegra132/i2c6.c b/src/soc/nvidia/tegra132/i2c6.c
index ef86126935..1ae8db3075 100644
--- a/src/soc/nvidia/tegra132/i2c6.c
+++ b/src/soc/nvidia/tegra132/i2c6.c
@@ -43,7 +43,7 @@ static void remove_clamps(int id)
return;
/* Remove clamp */
- writel((1 << id), &pmc->remove_clamping_cmd);
+ write32(&pmc->remove_clamping_cmd, (1 << id));
/* Wait for clamp off */
while (partition_clamp_on(id))
@@ -86,7 +86,7 @@ void soc_configure_i2c6pad(void)
soc_configure_host1x();
/* Now we can write the I2C6 mux in DPAUX */
- writel(I2C6_PADCTL, (void *)DPAUX_HYBRID_PADCTL);
+ write32((void *)DPAUX_HYBRID_PADCTL, I2C6_PADCTL);
/*
* Delay before turning off Host1X/DPAUX clocks.
diff --git a/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c b/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c
index 29fb9dedd6..8392a58228 100644
--- a/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c
+++ b/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c
@@ -261,17 +261,17 @@ inline static void write32(uint32_t val, void *addr)
inline static void setbits32(uint32_t bits, void *addr)
{
- writel(read32(addr) | bits, addr);
+ write32(addr, read32(addr) | bits);
}
inline static void clrbits32(uint32_t bits, void *addr)
{
- writel(read32(addr) & ~bits, addr);
+ write32(addr, read32(addr) & ~bits);
}
static void __attribute__((noreturn)) reset(void)
{
- writel(SWR_TRIG_SYS_RST, clk_rst_rst_devices_l_ptr);
+ write32(clk_rst_rst_devices_l_ptr, SWR_TRIG_SYS_RST);
halt();
}
@@ -370,18 +370,18 @@ static void enable_uart(void)
clrbits32(uart_mask, uart_rst_reg);
/* Program UART clock source: PLLP (408000000) */
- writel(0, uart_clk_source);
+ write32(uart_clk_source, 0);
/* Program 115200n8 to the uart port */
/* baud-rate of 115200 */
- writel(LCR_DLAB, (uart_base + UART_LCR));
- writel((UART_RATE_115200 & 0xff), (uart_base + UART_THR_DLAB));
- writel((UART_RATE_115200 >> 8), (uart_base + UART_IER_DLAB));
+ write32((uart_base + UART_LCR), LCR_DLAB);
+ write32((uart_base + UART_THR_DLAB), (UART_RATE_115200 & 0xff));
+ write32((uart_base + UART_IER_DLAB), (UART_RATE_115200 >> 8));
/* 8-bit and no parity */
- writel(LCR_WD_SIZE_8, (uart_base + UART_LCR));
+ write32((uart_base + UART_LCR), LCR_WD_SIZE_8);
/* enable and clear RX/TX FIFO */
- writel((FCR_TX_CLR + FCR_RX_CLR + FCR_EN_FIFO),
- (uart_base + UART_IIR_FCR));
+ write32((uart_base + UART_IIR_FCR),
+ (FCR_TX_CLR + FCR_RX_CLR + FCR_EN_FIFO));
}
/* Accessors. */
@@ -401,7 +401,7 @@ static unsigned get_osc_freq(void)
static void enable_jtag(void)
{
- writel(PP_CONFIG_CTL_JTAG, misc_pp_config_ctl_ptr);
+ write32(misc_pp_config_ctl_ptr, PP_CONFIG_CTL_JTAG);
}
/* Clock configuration. */
@@ -417,7 +417,7 @@ static void config_oscillator(void)
osc_ctrl &= ~OSC_XOFS_MASK;
osc_ctrl |= (xofs << OSC_XOFS_SHIFT);
osc_ctrl |= OSC_XOE;
- writel(osc_ctrl, clk_rst_osc_ctrl_ptr);
+ write32(clk_rst_osc_ctrl_ptr, osc_ctrl);
}
static void config_pllu(void)
@@ -462,24 +462,24 @@ static void config_pllu(void)
// Configure PLLU.
uint32_t base = PLLU_BYPASS | PLLU_OVERRIDE |
(divn << PLLU_DIVN_SHIFT) | (divm << PLLU_DIVM_SHIFT);
- writel(base, clk_rst_pllu_base_ptr);
+ write32(clk_rst_pllu_base_ptr, base);
uint32_t misc = (cpcon << PLLU_CPCON_SHIFT) |
(lfcon << PLLU_LFCON_SHIFT);
- writel(misc, clk_rst_pllu_misc_ptr);
+ write32(clk_rst_pllu_misc_ptr, misc);
// Enable PLLU.
base &= ~PLLU_BYPASS;
base |= PLLU_ENABLE;
- writel(base, clk_rst_pllu_base_ptr);
+ write32(clk_rst_pllu_base_ptr, base);
misc |= PLLU_LOCK_ENABLE;
- writel(misc, clk_rst_pllu_misc_ptr);
+ write32(clk_rst_pllu_misc_ptr, misc);
}
static void enable_cpu_clocks(void)
{
// Enable the CPU complex clock.
- writel(CLK_ENB_CPU, clk_rst_clk_enb_l_set_ptr);
- writel(CLK_ENB_CPUG | CLK_ENB_CPULP, clk_rst_clk_enb_v_set_ptr);
+ write32(clk_rst_clk_enb_l_set_ptr, CLK_ENB_CPU);
+ write32(clk_rst_clk_enb_v_set_ptr, CLK_ENB_CPUG | CLK_ENB_CPULP);
}
@@ -489,7 +489,7 @@ static void enable_cpu_clocks(void)
static void config_core_sight(void)
{
// Enable the CoreSight clock.
- writel(CLK_ENB_CSITE, clk_rst_clk_out_enb_u_set_ptr);
+ write32(clk_rst_clk_out_enb_u_set_ptr, CLK_ENB_CSITE);
/*
* De-assert CoreSight reset.
@@ -497,7 +497,7 @@ static void config_core_sight(void)
* now. It will be restored to its original clock source
* when the CPU-side restoration code runs.
*/
- writel(SWR_CSITE_RST, clk_rst_rst_dev_u_clr_ptr);
+ write32(clk_rst_rst_dev_u_clr_ptr, SWR_CSITE_RST);
}
@@ -508,11 +508,11 @@ static void clear_cpu_resets(void)
/* Hold CPU1 in reset */
setbits32(SET_CXRESET1, clk_rst_rst_cpulp_cmplx_set_ptr);
- writel(CLR_NONCPURESET | CLR_L2RESET | CLR_PRESETDBG,
- clk_rst_rst_cpug_cmplx_clr_ptr);
+ write32(clk_rst_rst_cpug_cmplx_clr_ptr,
+ CLR_NONCPURESET | CLR_L2RESET | CLR_PRESETDBG);
- writel(CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0,
- clk_rst_rst_cpug_cmplx_clr_ptr);
+ write32(clk_rst_rst_cpug_cmplx_clr_ptr,
+ CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0);
}
@@ -542,7 +542,8 @@ static void power_on_partition(unsigned id)
uint32_t bit = 0x1 << id;
if (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit)) {
// Partition is not on. Turn it on.
- writel(id | PWRGATE_TOGGLE_START, pmc_ctlr_pwrgate_toggle_ptr);
+ write32(pmc_ctlr_pwrgate_toggle_ptr,
+ id | PWRGATE_TOGGLE_START);
// Wait until the partition is powerd on.
while (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit))
@@ -572,15 +573,15 @@ static void power_on_main_cpu(void)
*/
uint32_t orig_timer = read32(pmc_ctlr_cpupwrgood_timer_ptr);
- writel(orig_timer * (204000000 / 32768),
- pmc_ctlr_cpupwrgood_timer_ptr);
+ write32(pmc_ctlr_cpupwrgood_timer_ptr,
+ orig_timer * (204000000 / 32768));
power_on_partition(PARTID_CRAIL);
power_on_partition(PARTID_C0NC);
power_on_partition(PARTID_CE0);
// Restore the original PMC_CPUPWRGOOD_TIMER.
- writel(orig_timer, pmc_ctlr_cpupwrgood_timer_ptr);
+ write32(pmc_ctlr_cpupwrgood_timer_ptr, orig_timer);
}
@@ -609,7 +610,7 @@ void lp0_resume(void)
config_oscillator();
// Program SUPER_CCLK_DIVIDER.
- writel(SUPER_CDIV_ENB, clk_rst_super_cclk_div_ptr);
+ write32(clk_rst_super_cclk_div_ptr, SUPER_CDIV_ENB);
config_core_sight();
@@ -623,12 +624,12 @@ void lp0_resume(void)
* T132 always resets to AARCH32 and SW needs to write RMR_EL3
* to bootstrap into AARCH64.
*/
- writel(get_wakeup_vector(), pmc_ctlr_secure_scratch34_ptr);
- writel(0, pmc_ctlr_secure_scratch35_ptr);
- writel((uint32_t)aarch64_trampoline, evp_cpu_reset_ptr);
+ write32(pmc_ctlr_secure_scratch34_ptr, get_wakeup_vector());
+ write32(pmc_ctlr_secure_scratch35_ptr, 0);
+ write32(evp_cpu_reset_ptr, (uint32_t)aarch64_trampoline);
// Select CPU complex clock source.
- writel(CCLK_PLLP_BURST_POLICY, clk_rst_cclk_burst_policy_ptr);
+ write32(clk_rst_cclk_burst_policy_ptr, CCLK_PLLP_BURST_POLICY);
// Disable PLLX since it isn't used as CPU clock source.
clrbits32(PLLX_ENABLE, clk_rst_pllx_base_ptr);
@@ -637,12 +638,12 @@ void lp0_resume(void)
uint32_t ack_width = read32(clk_rst_cpu_softrst_ctrl2_ptr);
ack_width &= ~CAR2PMC_CPU_ACK_WIDTH_MASK;
ack_width |= 408 << CAR2PMC_CPU_ACK_WIDTH_SHIFT;
- writel(ack_width, clk_rst_cpu_softrst_ctrl2_ptr);
+ write32(clk_rst_cpu_softrst_ctrl2_ptr, ack_width);
// Disable VPR.
- writel(0, mc_video_protect_size_mb_ptr);
- writel(VIDEO_PROTECT_WRITE_ACCESS_DISABLE,
- mc_video_protect_reg_ctrl_ptr);
+ write32(mc_video_protect_size_mb_ptr, 0);
+ write32(mc_video_protect_reg_ctrl_ptr,
+ VIDEO_PROTECT_WRITE_ACCESS_DISABLE);
enable_cpu_clocks();
@@ -655,8 +656,8 @@ void lp0_resume(void)
// Halt the AVP.
while (1)
- writel(FLOW_MODE_STOP | EVENT_JTAG,
- flow_ctlr_halt_cop_events_ptr);
+ write32(flow_ctlr_halt_cop_events_ptr,
+ FLOW_MODE_STOP | EVENT_JTAG);
}
diff --git a/src/soc/nvidia/tegra132/mipi.c b/src/soc/nvidia/tegra132/mipi.c
index abd2230378..1768fa0fd3 100644
--- a/src/soc/nvidia/tegra132/mipi.c
+++ b/src/soc/nvidia/tegra132/mipi.c
@@ -43,13 +43,13 @@ static struct tegra_mipi mipi_data = {
static inline unsigned long tegra_mipi_readl(struct tegra_mipi *mipi,
unsigned long reg)
{
- return readl(mipi->regs + (reg << 2));
+ return read32(mipi->regs + (reg << 2));
}
static inline void tegra_mipi_writel(struct tegra_mipi *mipi,
unsigned long value, unsigned long reg)
{
- writel(value, mipi->regs + (reg << 2));
+ write32(mipi->regs + (reg << 2), value);
}
static const struct calibration_regs tegra124_mipi_calibration_regs[] = {
diff --git a/src/soc/nvidia/tegra132/padconfig.c b/src/soc/nvidia/tegra132/padconfig.c
index 790f10f9c0..46cf944441 100644
--- a/src/soc/nvidia/tegra132/padconfig.c
+++ b/src/soc/nvidia/tegra132/padconfig.c
@@ -36,7 +36,7 @@ static inline uint32_t pad_get_pinmux(int index)
static inline void pad_set_pinmux(int index, uint32_t reg)
{
- return writel(reg, &pinmux_regs[index]);
+ return write32(&pinmux_regs[index], reg);
}
static inline void pad_set_gpio_out(int gpio_index, int val)
@@ -45,10 +45,10 @@ static inline void pad_set_gpio_out(int gpio_index, int val)
int port = gpio_index_to_port(gpio_index);
int bit = gpio_to_bit(gpio_index);
- writel((1 << (bit + GPIO_GPIOS_PER_PORT)) | (val << bit),
- &regs->out_value_mask[port]);
- writel((1 << (bit + GPIO_GPIOS_PER_PORT)) | (1 << bit),
- &regs->out_enable_mask[port]);
+ write32(&regs->out_value_mask[port],
+ (1 << (bit + GPIO_GPIOS_PER_PORT)) | (val << bit));
+ write32(&regs->out_enable_mask[port],
+ (1 << (bit + GPIO_GPIOS_PER_PORT)) | (1 << bit));
}
static inline void pad_set_mode(int gpio_index, int sfio_or_gpio)
@@ -57,8 +57,8 @@ static inline void pad_set_mode(int gpio_index, int sfio_or_gpio)
int port = gpio_index_to_port(gpio_index);
int bit = gpio_to_bit(gpio_index);
- writel((1 << (bit + GPIO_GPIOS_PER_PORT)) | (sfio_or_gpio << bit),
- &regs->config_mask[port]);
+ write32(&regs->config_mask[port],
+ (1 << (bit + GPIO_GPIOS_PER_PORT)) | (sfio_or_gpio << bit));
}
static inline void pad_set_gpio_mode(int gpio_index)
diff --git a/src/soc/nvidia/tegra132/power.c b/src/soc/nvidia/tegra132/power.c
index 0ebfd7c53e..b9ac90acf8 100644
--- a/src/soc/nvidia/tegra132/power.c
+++ b/src/soc/nvidia/tegra132/power.c
@@ -41,7 +41,7 @@ void power_ungate_partition(uint32_t id)
pwrgate_toggle &= ~(PMC_PWRGATE_TOGGLE_PARTID_MASK);
pwrgate_toggle |= (id << PMC_PWRGATE_TOGGLE_PARTID_SHIFT);
pwrgate_toggle |= PMC_PWRGATE_TOGGLE_START;
- writel(pwrgate_toggle, &pmc->pwrgate_toggle);
+ write32(&pmc->pwrgate_toggle, pwrgate_toggle);
/* Wait for the request to be accepted. */
while (read32(&pmc->pwrgate_toggle) & PMC_PWRGATE_TOGGLE_START)
diff --git a/src/soc/nvidia/tegra132/sdram.c b/src/soc/nvidia/tegra132/sdram.c
index 14d2b50fe1..65dce9b4cd 100644
--- a/src/soc/nvidia/tegra132/sdram.c
+++ b/src/soc/nvidia/tegra132/sdram.c
@@ -31,7 +31,7 @@
static void sdram_patch(uintptr_t addr, uint32_t value)
{
if (addr)
- writel(value, (uint32_t*)addr);
+ write32((uint32_t *)addr, value);
}
static void writebits(uint32_t value, uint32_t *addr, uint32_t mask)
@@ -44,7 +44,7 @@ static void sdram_configure_pmc(const struct sdram_params *param,
struct tegra_pmc_regs *regs)
{
/* VDDP Select */
- writel(param->PmcVddpSel, &regs->vddp_sel);
+ write32(&regs->vddp_sel, param->PmcVddpSel);
udelay(param->PmcVddpSelWait);
/* Set DDR pad voltage */
@@ -60,7 +60,7 @@ static void sdram_configure_pmc(const struct sdram_params *param,
writebits(param->PmcNoIoPower, &regs->no_iopower,
(PMC_NO_IOPOWER_MEM_MASK | PMC_NO_IOPOWER_MEM_COMP_MASK));
- writel(param->PmcRegShort, &regs->reg_short);
+ write32(&regs->reg_short, param->PmcRegShort);
}
static void sdram_start_clocks(const struct sdram_params *param)
@@ -100,148 +100,151 @@ static void sdram_deassert_sel_dpd(const struct sdram_params *param,
static void sdram_set_swizzle(const struct sdram_params *param,
struct tegra_emc_regs *regs)
{
- writel(param->EmcSwizzleRank0ByteCfg, &regs->swizzle_rank0_byte_cfg);
- writel(param->EmcSwizzleRank0Byte0, &regs->swizzle_rank0_byte0);
- writel(param->EmcSwizzleRank0Byte1, &regs->swizzle_rank0_byte1);
- writel(param->EmcSwizzleRank0Byte2, &regs->swizzle_rank0_byte2);
- writel(param->EmcSwizzleRank0Byte3, &regs->swizzle_rank0_byte3);
- writel(param->EmcSwizzleRank1ByteCfg, &regs->swizzle_rank1_byte_cfg);
- writel(param->EmcSwizzleRank1Byte0, &regs->swizzle_rank1_byte0);
- writel(param->EmcSwizzleRank1Byte1, &regs->swizzle_rank1_byte1);
- writel(param->EmcSwizzleRank1Byte2, &regs->swizzle_rank1_byte2);
- writel(param->EmcSwizzleRank1Byte3, &regs->swizzle_rank1_byte3);
+ write32(&regs->swizzle_rank0_byte_cfg, param->EmcSwizzleRank0ByteCfg);
+ write32(&regs->swizzle_rank0_byte0, param->EmcSwizzleRank0Byte0);
+ write32(&regs->swizzle_rank0_byte1, param->EmcSwizzleRank0Byte1);
+ write32(&regs->swizzle_rank0_byte2, param->EmcSwizzleRank0Byte2);
+ write32(&regs->swizzle_rank0_byte3, param->EmcSwizzleRank0Byte3);
+ write32(&regs->swizzle_rank1_byte_cfg, param->EmcSwizzleRank1ByteCfg);
+ write32(&regs->swizzle_rank1_byte0, param->EmcSwizzleRank1Byte0);
+ write32(&regs->swizzle_rank1_byte1, param->EmcSwizzleRank1Byte1);
+ write32(&regs->swizzle_rank1_byte2, param->EmcSwizzleRank1Byte2);
+ write32(&regs->swizzle_rank1_byte3, param->EmcSwizzleRank1Byte3);
}
static void sdram_set_pad_controls(const struct sdram_params *param,
struct tegra_emc_regs *regs)
{
/* Program the pad controls */
- writel(param->EmcXm2CmdPadCtrl, &regs->xm2cmdpadctrl);
- writel(param->EmcXm2CmdPadCtrl2, &regs->xm2cmdpadctrl2);
- writel(param->EmcXm2CmdPadCtrl3, &regs->xm2cmdpadctrl3);
- writel(param->EmcXm2CmdPadCtrl4, &regs->xm2cmdpadctrl4);
- writel(param->EmcXm2CmdPadCtrl5, &regs->xm2cmdpadctrl5);
+ write32(&regs->xm2cmdpadctrl, param->EmcXm2CmdPadCtrl);
+ write32(&regs->xm2cmdpadctrl2, param->EmcXm2CmdPadCtrl2);
+ write32(&regs->xm2cmdpadctrl3, param->EmcXm2CmdPadCtrl3);
+ write32(&regs->xm2cmdpadctrl4, param->EmcXm2CmdPadCtrl4);
+ write32(&regs->xm2cmdpadctrl5, param->EmcXm2CmdPadCtrl5);
- writel(param->EmcXm2DqsPadCtrl, &regs->xm2dqspadctrl);
- writel(param->EmcXm2DqsPadCtrl2, &regs->xm2dqspadctrl2);
- writel(param->EmcXm2DqsPadCtrl3, &regs->xm2dqspadctrl3);
- writel(param->EmcXm2DqsPadCtrl4, &regs->xm2dqspadctrl4);
- writel(param->EmcXm2DqsPadCtrl5, &regs->xm2dqspadctrl5);
- writel(param->EmcXm2DqsPadCtrl6, &regs->xm2dqspadctrl6);
+ write32(&regs->xm2dqspadctrl, param->EmcXm2DqsPadCtrl);
+ write32(&regs->xm2dqspadctrl2, param->EmcXm2DqsPadCtrl2);
+ write32(&regs->xm2dqspadctrl3, param->EmcXm2DqsPadCtrl3);
+ write32(&regs->xm2dqspadctrl4, param->EmcXm2DqsPadCtrl4);
+ write32(&regs->xm2dqspadctrl5, param->EmcXm2DqsPadCtrl5);
+ write32(&regs->xm2dqspadctrl6, param->EmcXm2DqsPadCtrl6);
- writel(param->EmcXm2DqPadCtrl, &regs->xm2dqpadctrl);
- writel(param->EmcXm2DqPadCtrl2, &regs->xm2dqpadctrl2);
- writel(param->EmcXm2DqPadCtrl3, &regs->xm2dqpadctrl3);
+ write32(&regs->xm2dqpadctrl, param->EmcXm2DqPadCtrl);
+ write32(&regs->xm2dqpadctrl2, param->EmcXm2DqPadCtrl2);
+ write32(&regs->xm2dqpadctrl3, param->EmcXm2DqPadCtrl3);
- writel(param->EmcXm2ClkPadCtrl, &regs->xm2clkpadctrl);
- writel(param->EmcXm2ClkPadCtrl2, &regs->xm2clkpadctrl2);
+ write32(&regs->xm2clkpadctrl, param->EmcXm2ClkPadCtrl);
+ write32(&regs->xm2clkpadctrl2, param->EmcXm2ClkPadCtrl2);
- writel(param->EmcXm2CompPadCtrl, &regs->xm2comppadctrl);
+ write32(&regs->xm2comppadctrl, param->EmcXm2CompPadCtrl);
- writel(param->EmcXm2VttGenPadCtrl, &regs->xm2vttgenpadctrl);
- writel(param->EmcXm2VttGenPadCtrl2, &regs->xm2vttgenpadctrl2);
- writel(param->EmcXm2VttGenPadCtrl3, &regs->xm2vttgenpadctrl3);
+ write32(&regs->xm2vttgenpadctrl, param->EmcXm2VttGenPadCtrl);
+ write32(&regs->xm2vttgenpadctrl2, param->EmcXm2VttGenPadCtrl2);
+ write32(&regs->xm2vttgenpadctrl3, param->EmcXm2VttGenPadCtrl3);
- writel(param->EmcCttTermCtrl, &regs->ctt_term_ctrl);
+ write32(&regs->ctt_term_ctrl, param->EmcCttTermCtrl);
}
static void sdram_trigger_emc_timing_update(struct tegra_emc_regs *regs)
{
- writel(EMC_TIMING_CONTROL_TIMING_UPDATE, &regs->timing_control);
+ write32(&regs->timing_control, EMC_TIMING_CONTROL_TIMING_UPDATE);
}
static void sdram_init_mc(const struct sdram_params *param,
struct tegra_mc_regs *regs)
{
/* Initialize MC VPR settings */
- writel(param->McDisplaySnapRing, &regs->display_snap_ring);
- writel(param->McVideoProtectBom, &regs->video_protect_bom);
- writel(param->McVideoProtectBomAdrHi, &regs->video_protect_bom_adr_hi);
- writel(param->McVideoProtectSizeMb, &regs->video_protect_size_mb);
- writel(param->McVideoProtectVprOverride,
- &regs->video_protect_vpr_override);
- writel(param->McVideoProtectVprOverride1,
- &regs->video_protect_vpr_override1);
- writel(param->McVideoProtectGpuOverride0,
- &regs->video_protect_gpu_override_0);
- writel(param->McVideoProtectGpuOverride1,
- &regs->video_protect_gpu_override_1);
+ write32(&regs->display_snap_ring, param->McDisplaySnapRing);
+ write32(&regs->video_protect_bom, param->McVideoProtectBom);
+ write32(&regs->video_protect_bom_adr_hi,
+ param->McVideoProtectBomAdrHi);
+ write32(&regs->video_protect_size_mb, param->McVideoProtectSizeMb);
+ write32(&regs->video_protect_vpr_override,
+ param->McVideoProtectVprOverride);
+ write32(&regs->video_protect_vpr_override1,
+ param->McVideoProtectVprOverride1);
+ write32(&regs->video_protect_gpu_override_0,
+ param->McVideoProtectGpuOverride0);
+ write32(&regs->video_protect_gpu_override_1,
+ param->McVideoProtectGpuOverride1);
/* Program SDRAM geometry paarameters */
- writel(param->McEmemAdrCfg, &regs->emem_adr_cfg);
- writel(param->McEmemAdrCfgDev0, &regs->emem_adr_cfg_dev0);
- writel(param->McEmemAdrCfgDev1, &regs->emem_adr_cfg_dev1);
+ write32(&regs->emem_adr_cfg, param->McEmemAdrCfg);
+ write32(&regs->emem_adr_cfg_dev0, param->McEmemAdrCfgDev0);
+ write32(&regs->emem_adr_cfg_dev1, param->McEmemAdrCfgDev1);
/* Program bank swizzling */
- writel(param->McEmemAdrCfgBankMask0, &regs->emem_bank_swizzle_cfg0);
- writel(param->McEmemAdrCfgBankMask1, &regs->emem_bank_swizzle_cfg1);
- writel(param->McEmemAdrCfgBankMask2, &regs->emem_bank_swizzle_cfg2);
- writel(param->McEmemAdrCfgBankSwizzle3, &regs->emem_bank_swizzle_cfg3);
+ write32(&regs->emem_bank_swizzle_cfg0, param->McEmemAdrCfgBankMask0);
+ write32(&regs->emem_bank_swizzle_cfg1, param->McEmemAdrCfgBankMask1);
+ write32(&regs->emem_bank_swizzle_cfg2, param->McEmemAdrCfgBankMask2);
+ write32(&regs->emem_bank_swizzle_cfg3,
+ param->McEmemAdrCfgBankSwizzle3);
/* Program external memory aperature (base and size) */
- writel(param->McEmemCfg, &regs->emem_cfg);
+ write32(&regs->emem_cfg, param->McEmemCfg);
/* Program SEC carveout (base and size) */
- writel(param->McSecCarveoutBom, &regs->sec_carveout_bom);
- writel(param->McSecCarveoutAdrHi, &regs->sec_carveout_adr_hi);
- writel(param->McSecCarveoutSizeMb, &regs->sec_carveout_size_mb);
+ write32(&regs->sec_carveout_bom, param->McSecCarveoutBom);
+ write32(&regs->sec_carveout_adr_hi, param->McSecCarveoutAdrHi);
+ write32(&regs->sec_carveout_size_mb, param->McSecCarveoutSizeMb);
/* Program MTS carveout (base and size) */
- writel(param->McMtsCarveoutBom, &regs->mts_carveout_bom);
- writel(param->McMtsCarveoutAdrHi, &regs->mts_carveout_adr_hi);
- writel(param->McMtsCarveoutSizeMb, &regs->mts_carveout_size_mb);
+ write32(&regs->mts_carveout_bom, param->McMtsCarveoutBom);
+ write32(&regs->mts_carveout_adr_hi, param->McMtsCarveoutAdrHi);
+ write32(&regs->mts_carveout_size_mb, param->McMtsCarveoutSizeMb);
/* Program the memory arbiter */
- writel(param->McEmemArbCfg, &regs->emem_arb_cfg);
- writel(param->McEmemArbOutstandingReq, &regs->emem_arb_outstanding_req);
- writel(param->McEmemArbTimingRcd, &regs->emem_arb_timing_rcd);
- writel(param->McEmemArbTimingRp, &regs->emem_arb_timing_rp);
- writel(param->McEmemArbTimingRc, &regs->emem_arb_timing_rc);
- writel(param->McEmemArbTimingRas, &regs->emem_arb_timing_ras);
- writel(param->McEmemArbTimingFaw, &regs->emem_arb_timing_faw);
- writel(param->McEmemArbTimingRrd, &regs->emem_arb_timing_rrd);
- writel(param->McEmemArbTimingRap2Pre, &regs->emem_arb_timing_rap2pre);
- writel(param->McEmemArbTimingWap2Pre, &regs->emem_arb_timing_wap2pre);
- writel(param->McEmemArbTimingR2R, &regs->emem_arb_timing_r2r);
- writel(param->McEmemArbTimingW2W, &regs->emem_arb_timing_w2w);
- writel(param->McEmemArbTimingR2W, &regs->emem_arb_timing_r2w);
- writel(param->McEmemArbTimingW2R, &regs->emem_arb_timing_w2r);
- writel(param->McEmemArbDaTurns, &regs->emem_arb_da_turns);
- writel(param->McEmemArbDaCovers, &regs->emem_arb_da_covers);
- writel(param->McEmemArbMisc0, &regs->emem_arb_misc0);
- writel(param->McEmemArbMisc1, &regs->emem_arb_misc1);
- writel(param->McEmemArbRing1Throttle, &regs->emem_arb_ring1_throttle);
- writel(param->McEmemArbOverride, &regs->emem_arb_override);
- writel(param->McEmemArbOverride1, &regs->emem_arb_override_1);
- writel(param->McEmemArbRsv, &regs->emem_arb_rsv);
+ write32(&regs->emem_arb_cfg, param->McEmemArbCfg);
+ write32(&regs->emem_arb_outstanding_req,
+ param->McEmemArbOutstandingReq);
+ write32(&regs->emem_arb_timing_rcd, param->McEmemArbTimingRcd);
+ write32(&regs->emem_arb_timing_rp, param->McEmemArbTimingRp);
+ write32(&regs->emem_arb_timing_rc, param->McEmemArbTimingRc);
+ write32(&regs->emem_arb_timing_ras, param->McEmemArbTimingRas);
+ write32(&regs->emem_arb_timing_faw, param->McEmemArbTimingFaw);
+ write32(&regs->emem_arb_timing_rrd, param->McEmemArbTimingRrd);
+ write32(&regs->emem_arb_timing_rap2pre, param->McEmemArbTimingRap2Pre);
+ write32(&regs->emem_arb_timing_wap2pre, param->McEmemArbTimingWap2Pre);
+ write32(&regs->emem_arb_timing_r2r, param->McEmemArbTimingR2R);
+ write32(&regs->emem_arb_timing_w2w, param->McEmemArbTimingW2W);
+ write32(&regs->emem_arb_timing_r2w, param->McEmemArbTimingR2W);
+ write32(&regs->emem_arb_timing_w2r, param->McEmemArbTimingW2R);
+ write32(&regs->emem_arb_da_turns, param->McEmemArbDaTurns);
+ write32(&regs->emem_arb_da_covers, param->McEmemArbDaCovers);
+ write32(&regs->emem_arb_misc0, param->McEmemArbMisc0);
+ write32(&regs->emem_arb_misc1, param->McEmemArbMisc1);
+ write32(&regs->emem_arb_ring1_throttle, param->McEmemArbRing1Throttle);
+ write32(&regs->emem_arb_override, param->McEmemArbOverride);
+ write32(&regs->emem_arb_override_1, param->McEmemArbOverride1);
+ write32(&regs->emem_arb_rsv, param->McEmemArbRsv);
/* Program extra snap levels for display client */
- writel(param->McDisExtraSnapLevels, &regs->dis_extra_snap_levels);
+ write32(&regs->dis_extra_snap_levels, param->McDisExtraSnapLevels);
/* Trigger MC timing update */
- writel(MC_TIMING_CONTROL_TIMING_UPDATE, &regs->timing_control);
+ write32(&regs->timing_control, MC_TIMING_CONTROL_TIMING_UPDATE);
/* Program second-level clock enable overrides */
- writel(param->McClkenOverride, &regs->clken_override);
+ write32(&regs->clken_override, param->McClkenOverride);
/* Program statistics gathering */
- writel(param->McStatControl, &regs->stat_control);
+ write32(&regs->stat_control, param->McStatControl);
}
static void sdram_init_emc(const struct sdram_params *param,
struct tegra_emc_regs *regs)
{
/* Program SDRAM geometry parameters */
- writel(param->EmcAdrCfg, &regs->adr_cfg);
+ write32(&regs->adr_cfg, param->EmcAdrCfg);
/* Program second-level clock enable overrides */
- writel(param->EmcClkenOverride, &regs->clken_override);
+ write32(&regs->clken_override, param->EmcClkenOverride);
/* Program EMC pad auto calibration */
- writel(param->EmcAutoCalInterval, &regs->auto_cal_interval);
- writel(param->EmcAutoCalConfig2, &regs->auto_cal_config2);
- writel(param->EmcAutoCalConfig3, &regs->auto_cal_config3);
- writel(param->EmcAutoCalConfig, &regs->auto_cal_config);
+ write32(&regs->auto_cal_interval, param->EmcAutoCalInterval);
+ write32(&regs->auto_cal_config2, param->EmcAutoCalConfig2);
+ write32(&regs->auto_cal_config3, param->EmcAutoCalConfig3);
+ write32(&regs->auto_cal_config, param->EmcAutoCalConfig);
udelay(param->EmcAutoCalWait);
}
@@ -249,129 +252,129 @@ static void sdram_set_emc_timing(const struct sdram_params *param,
struct tegra_emc_regs *regs)
{
/* Program EMC timing configuration */
- writel(param->EmcCfg2, &regs->cfg_2);
- writel(param->EmcCfgPipe, &regs->cfg_pipe);
- writel(param->EmcDbg, &regs->dbg);
- writel(param->EmcCmdQ, &regs->cmdq);
- writel(param->EmcMc2EmcQ, &regs->mc2emcq);
- writel(param->EmcMrsWaitCnt, &regs->mrs_wait_cnt);
- writel(param->EmcMrsWaitCnt2, &regs->mrs_wait_cnt2);
- writel(param->EmcFbioCfg5, &regs->fbio_cfg5);
- writel(param->EmcRc, &regs->rc);
- writel(param->EmcRfc, &regs->rfc);
- writel(param->EmcRfcSlr, &regs->rfc_slr);
- writel(param->EmcRas, &regs->ras);
- writel(param->EmcRp, &regs->rp);
- writel(param->EmcR2r, &regs->r2r);
- writel(param->EmcW2w, &regs->w2w);
- writel(param->EmcR2w, &regs->r2w);
- writel(param->EmcW2r, &regs->w2r);
- writel(param->EmcR2p, &regs->r2p);
- writel(param->EmcW2p, &regs->w2p);
- writel(param->EmcRdRcd, &regs->rd_rcd);
- writel(param->EmcWrRcd, &regs->wr_rcd);
- writel(param->EmcRrd, &regs->rrd);
- writel(param->EmcRext, &regs->rext);
- writel(param->EmcWext, &regs->wext);
- writel(param->EmcWdv, &regs->wdv);
- writel(param->EmcWdvMask, &regs->wdv_mask);
- writel(param->EmcQUse, &regs->quse);
- writel(param->EmcQuseWidth, &regs->quse_width);
- writel(param->EmcIbdly, &regs->ibdly);
- writel(param->EmcEInput, &regs->einput);
- writel(param->EmcEInputDuration, &regs->einput_duration);
- writel(param->EmcPutermExtra, &regs->puterm_extra);
- writel(param->EmcPutermWidth, &regs->puterm_width);
- writel(param->EmcPutermAdj, &regs->puterm_adj);
- writel(param->EmcCdbCntl1, &regs->cdb_cntl_1);
- writel(param->EmcCdbCntl2, &regs->cdb_cntl_2);
- writel(param->EmcCdbCntl3, &regs->cdb_cntl_3);
- writel(param->EmcQRst, &regs->qrst);
- writel(param->EmcQSafe, &regs->qsafe);
- writel(param->EmcRdv, &regs->rdv);
- writel(param->EmcRdvMask, &regs->rdv_mask);
- writel(param->EmcQpop, &regs->qpop);
- writel(param->EmcCtt, &regs->ctt);
- writel(param->EmcCttDuration, &regs->ctt_duration);
- writel(param->EmcRefresh, &regs->refresh);
- writel(param->EmcBurstRefreshNum, &regs->burst_refresh_num);
- writel(param->EmcPreRefreshReqCnt, &regs->pre_refresh_req_cnt);
- writel(param->EmcPdEx2Wr, &regs->pdex2wr);
- writel(param->EmcPdEx2Rd, &regs->pdex2rd);
- writel(param->EmcPChg2Pden, &regs->pchg2pden);
- writel(param->EmcAct2Pden, &regs->act2pden);
- writel(param->EmcAr2Pden, &regs->ar2pden);
- writel(param->EmcRw2Pden, &regs->rw2pden);
- writel(param->EmcTxsr, &regs->txsr);
- writel(param->EmcTxsrDll, &regs->txsrdll);
- writel(param->EmcTcke, &regs->tcke);
- writel(param->EmcTckesr, &regs->tckesr);
- writel(param->EmcTpd, &regs->tpd);
- writel(param->EmcTfaw, &regs->tfaw);
- writel(param->EmcTrpab, &regs->trpab);
- writel(param->EmcTClkStable, &regs->tclkstable);
- writel(param->EmcTClkStop, &regs->tclkstop);
- writel(param->EmcTRefBw, &regs->trefbw);
- writel(param->EmcOdtWrite, &regs->odt_write);
- writel(param->EmcOdtRead, &regs->odt_read);
- writel(param->EmcFbioCfg6, &regs->fbio_cfg6);
- writel(param->EmcCfgDigDll, &regs->cfg_dig_dll);
- writel(param->EmcCfgDigDllPeriod, &regs->cfg_dig_dll_period);
+ write32(&regs->cfg_2, param->EmcCfg2);
+ write32(&regs->cfg_pipe, param->EmcCfgPipe);
+ write32(&regs->dbg, param->EmcDbg);
+ write32(&regs->cmdq, param->EmcCmdQ);
+ write32(&regs->mc2emcq, param->EmcMc2EmcQ);
+ write32(&regs->mrs_wait_cnt, param->EmcMrsWaitCnt);
+ write32(&regs->mrs_wait_cnt2, param->EmcMrsWaitCnt2);
+ write32(&regs->fbio_cfg5, param->EmcFbioCfg5);
+ write32(&regs->rc, param->EmcRc);
+ write32(&regs->rfc, param->EmcRfc);
+ write32(&regs->rfc_slr, param->EmcRfcSlr);
+ write32(&regs->ras, param->EmcRas);
+ write32(&regs->rp, param->EmcRp);
+ write32(&regs->r2r, param->EmcR2r);
+ write32(&regs->w2w, param->EmcW2w);
+ write32(&regs->r2w, param->EmcR2w);
+ write32(&regs->w2r, param->EmcW2r);
+ write32(&regs->r2p, param->EmcR2p);
+ write32(&regs->w2p, param->EmcW2p);
+ write32(&regs->rd_rcd, param->EmcRdRcd);
+ write32(&regs->wr_rcd, param->EmcWrRcd);
+ write32(&regs->rrd, param->EmcRrd);
+ write32(&regs->rext, param->EmcRext);
+ write32(&regs->wext, param->EmcWext);
+ write32(&regs->wdv, param->EmcWdv);
+ write32(&regs->wdv_mask, param->EmcWdvMask);
+ write32(&regs->quse, param->EmcQUse);
+ write32(&regs->quse_width, param->EmcQuseWidth);
+ write32(&regs->ibdly, param->EmcIbdly);
+ write32(&regs->einput, param->EmcEInput);
+ write32(&regs->einput_duration, param->EmcEInputDuration);
+ write32(&regs->puterm_extra, param->EmcPutermExtra);
+ write32(&regs->puterm_width, param->EmcPutermWidth);
+ write32(&regs->puterm_adj, param->EmcPutermAdj);
+ write32(&regs->cdb_cntl_1, param->EmcCdbCntl1);
+ write32(&regs->cdb_cntl_2, param->EmcCdbCntl2);
+ write32(&regs->cdb_cntl_3, param->EmcCdbCntl3);
+ write32(&regs->qrst, param->EmcQRst);
+ write32(&regs->qsafe, param->EmcQSafe);
+ write32(&regs->rdv, param->EmcRdv);
+ write32(&regs->rdv_mask, param->EmcRdvMask);
+ write32(&regs->qpop, param->EmcQpop);
+ write32(&regs->ctt, param->EmcCtt);
+ write32(&regs->ctt_duration, param->EmcCttDuration);
+ write32(&regs->refresh, param->EmcRefresh);
+ write32(&regs->burst_refresh_num, param->EmcBurstRefreshNum);
+ write32(&regs->pre_refresh_req_cnt, param->EmcPreRefreshReqCnt);
+ write32(&regs->pdex2wr, param->EmcPdEx2Wr);
+ write32(&regs->pdex2rd, param->EmcPdEx2Rd);
+ write32(&regs->pchg2pden, param->EmcPChg2Pden);
+ write32(&regs->act2pden, param->EmcAct2Pden);
+ write32(&regs->ar2pden, param->EmcAr2Pden);
+ write32(&regs->rw2pden, param->EmcRw2Pden);
+ write32(&regs->txsr, param->EmcTxsr);
+ write32(&regs->txsrdll, param->EmcTxsrDll);
+ write32(&regs->tcke, param->EmcTcke);
+ write32(&regs->tckesr, param->EmcTckesr);
+ write32(&regs->tpd, param->EmcTpd);
+ write32(&regs->tfaw, param->EmcTfaw);
+ write32(&regs->trpab, param->EmcTrpab);
+ write32(&regs->tclkstable, param->EmcTClkStable);
+ write32(&regs->tclkstop, param->EmcTClkStop);
+ write32(&regs->trefbw, param->EmcTRefBw);
+ write32(&regs->odt_write, param->EmcOdtWrite);
+ write32(&regs->odt_read, param->EmcOdtRead);
+ write32(&regs->fbio_cfg6, param->EmcFbioCfg6);
+ write32(&regs->cfg_dig_dll, param->EmcCfgDigDll);
+ write32(&regs->cfg_dig_dll_period, param->EmcCfgDigDllPeriod);
/* Don't write bit 1: addr swizzle lock bit. Written at end of sequence. */
- writel(param->EmcFbioSpare & 0xfffffffd, &regs->fbio_spare);
-
- writel(param->EmcCfgRsv, &regs->cfg_rsv);
- writel(param->EmcDllXformDqs0, &regs->dll_xform_dqs0);
- writel(param->EmcDllXformDqs1, &regs->dll_xform_dqs1);
- writel(param->EmcDllXformDqs2, &regs->dll_xform_dqs2);
- writel(param->EmcDllXformDqs3, &regs->dll_xform_dqs3);
- writel(param->EmcDllXformDqs4, &regs->dll_xform_dqs4);
- writel(param->EmcDllXformDqs5, &regs->dll_xform_dqs5);
- writel(param->EmcDllXformDqs6, &regs->dll_xform_dqs6);
- writel(param->EmcDllXformDqs7, &regs->dll_xform_dqs7);
- writel(param->EmcDllXformDqs8, &regs->dll_xform_dqs8);
- writel(param->EmcDllXformDqs9, &regs->dll_xform_dqs9);
- writel(param->EmcDllXformDqs10, &regs->dll_xform_dqs10);
- writel(param->EmcDllXformDqs11, &regs->dll_xform_dqs11);
- writel(param->EmcDllXformDqs12, &regs->dll_xform_dqs12);
- writel(param->EmcDllXformDqs13, &regs->dll_xform_dqs13);
- writel(param->EmcDllXformDqs14, &regs->dll_xform_dqs14);
- writel(param->EmcDllXformDqs15, &regs->dll_xform_dqs15);
- writel(param->EmcDllXformQUse0, &regs->dll_xform_quse0);
- writel(param->EmcDllXformQUse1, &regs->dll_xform_quse1);
- writel(param->EmcDllXformQUse2, &regs->dll_xform_quse2);
- writel(param->EmcDllXformQUse3, &regs->dll_xform_quse3);
- writel(param->EmcDllXformQUse4, &regs->dll_xform_quse4);
- writel(param->EmcDllXformQUse5, &regs->dll_xform_quse5);
- writel(param->EmcDllXformQUse6, &regs->dll_xform_quse6);
- writel(param->EmcDllXformQUse7, &regs->dll_xform_quse7);
- writel(param->EmcDllXformQUse8, &regs->dll_xform_quse8);
- writel(param->EmcDllXformQUse9, &regs->dll_xform_quse9);
- writel(param->EmcDllXformQUse10, &regs->dll_xform_quse10);
- writel(param->EmcDllXformQUse11, &regs->dll_xform_quse11);
- writel(param->EmcDllXformQUse12, &regs->dll_xform_quse12);
- writel(param->EmcDllXformQUse13, &regs->dll_xform_quse13);
- writel(param->EmcDllXformQUse14, &regs->dll_xform_quse14);
- writel(param->EmcDllXformQUse15, &regs->dll_xform_quse15);
- writel(param->EmcDllXformDq0, &regs->dll_xform_dq0);
- writel(param->EmcDllXformDq1, &regs->dll_xform_dq1);
- writel(param->EmcDllXformDq2, &regs->dll_xform_dq2);
- writel(param->EmcDllXformDq3, &regs->dll_xform_dq3);
- writel(param->EmcDllXformDq4, &regs->dll_xform_dq4);
- writel(param->EmcDllXformDq5, &regs->dll_xform_dq5);
- writel(param->EmcDllXformDq6, &regs->dll_xform_dq6);
- writel(param->EmcDllXformDq7, &regs->dll_xform_dq7);
- writel(param->EmcDllXformAddr0, &regs->dll_xform_addr0);
- writel(param->EmcDllXformAddr1, &regs->dll_xform_addr1);
- writel(param->EmcDllXformAddr2, &regs->dll_xform_addr2);
- writel(param->EmcDllXformAddr3, &regs->dll_xform_addr3);
- writel(param->EmcDllXformAddr4, &regs->dll_xform_addr4);
- writel(param->EmcDllXformAddr5, &regs->dll_xform_addr5);
- writel(param->EmcAcpdControl, &regs->acpd_control);
- writel(param->EmcDsrVttgenDrv, &regs->dsr_vttgen_drv);
- writel(param->EmcTxdsrvttgen, &regs->txdsrvttgen);
- writel(param->EmcBgbiasCtl0, &regs->bgbias_ctl0);
+ write32(&regs->fbio_spare, param->EmcFbioSpare & 0xfffffffd);
+
+ write32(&regs->cfg_rsv, param->EmcCfgRsv);
+ write32(&regs->dll_xform_dqs0, param->EmcDllXformDqs0);
+ write32(&regs->dll_xform_dqs1, param->EmcDllXformDqs1);
+ write32(&regs->dll_xform_dqs2, param->EmcDllXformDqs2);
+ write32(&regs->dll_xform_dqs3, param->EmcDllXformDqs3);
+ write32(&regs->dll_xform_dqs4, param->EmcDllXformDqs4);
+ write32(&regs->dll_xform_dqs5, param->EmcDllXformDqs5);
+ write32(&regs->dll_xform_dqs6, param->EmcDllXformDqs6);
+ write32(&regs->dll_xform_dqs7, param->EmcDllXformDqs7);
+ write32(&regs->dll_xform_dqs8, param->EmcDllXformDqs8);
+ write32(&regs->dll_xform_dqs9, param->EmcDllXformDqs9);
+ write32(&regs->dll_xform_dqs10, param->EmcDllXformDqs10);
+ write32(&regs->dll_xform_dqs11, param->EmcDllXformDqs11);
+ write32(&regs->dll_xform_dqs12, param->EmcDllXformDqs12);
+ write32(&regs->dll_xform_dqs13, param->EmcDllXformDqs13);
+ write32(&regs->dll_xform_dqs14, param->EmcDllXformDqs14);
+ write32(&regs->dll_xform_dqs15, param->EmcDllXformDqs15);
+ write32(&regs->dll_xform_quse0, param->EmcDllXformQUse0);
+ write32(&regs->dll_xform_quse1, param->EmcDllXformQUse1);
+ write32(&regs->dll_xform_quse2, param->EmcDllXformQUse2);
+ write32(&regs->dll_xform_quse3, param->EmcDllXformQUse3);
+ write32(&regs->dll_xform_quse4, param->EmcDllXformQUse4);
+ write32(&regs->dll_xform_quse5, param->EmcDllXformQUse5);
+ write32(&regs->dll_xform_quse6, param->EmcDllXformQUse6);
+ write32(&regs->dll_xform_quse7, param->EmcDllXformQUse7);
+ write32(&regs->dll_xform_quse8, param->EmcDllXformQUse8);
+ write32(&regs->dll_xform_quse9, param->EmcDllXformQUse9);
+ write32(&regs->dll_xform_quse10, param->EmcDllXformQUse10);
+ write32(&regs->dll_xform_quse11, param->EmcDllXformQUse11);
+ write32(&regs->dll_xform_quse12, param->EmcDllXformQUse12);
+ write32(&regs->dll_xform_quse13, param->EmcDllXformQUse13);
+ write32(&regs->dll_xform_quse14, param->EmcDllXformQUse14);
+ write32(&regs->dll_xform_quse15, param->EmcDllXformQUse15);
+ write32(&regs->dll_xform_dq0, param->EmcDllXformDq0);
+ write32(&regs->dll_xform_dq1, param->EmcDllXformDq1);
+ write32(&regs->dll_xform_dq2, param->EmcDllXformDq2);
+ write32(&regs->dll_xform_dq3, param->EmcDllXformDq3);
+ write32(&regs->dll_xform_dq4, param->EmcDllXformDq4);
+ write32(&regs->dll_xform_dq5, param->EmcDllXformDq5);
+ write32(&regs->dll_xform_dq6, param->EmcDllXformDq6);
+ write32(&regs->dll_xform_dq7, param->EmcDllXformDq7);
+ write32(&regs->dll_xform_addr0, param->EmcDllXformAddr0);
+ write32(&regs->dll_xform_addr1, param->EmcDllXformAddr1);
+ write32(&regs->dll_xform_addr2, param->EmcDllXformAddr2);
+ write32(&regs->dll_xform_addr3, param->EmcDllXformAddr3);
+ write32(&regs->dll_xform_addr4, param->EmcDllXformAddr4);
+ write32(&regs->dll_xform_addr5, param->EmcDllXformAddr5);
+ write32(&regs->acpd_control, param->EmcAcpdControl);
+ write32(&regs->dsr_vttgen_drv, param->EmcDsrVttgenDrv);
+ write32(&regs->txdsrvttgen, param->EmcTxdsrvttgen);
+ write32(&regs->bgbias_ctl0, param->EmcBgbiasCtl0);
/*
* Set pipe bypass enable bits before sending any DRAM commands.
@@ -391,8 +394,8 @@ static void sdram_patch_bootrom(const struct sdram_params *param,
BOOT_ROM_PATCH_CONTROL_OFFSET_MASK) >>
BOOT_ROM_PATCH_CONTROL_OFFSET_SHIFT);
addr = BOOT_ROM_PATCH_CONTROL_BASE_ADDRESS + (addr << 2);
- writel(param->BootRomPatchData, (uint32_t *)addr);
- writel(1, &regs->timing_control);
+ write32((uint32_t *)addr, param->BootRomPatchData);
+ write32(&regs->timing_control, 1);
}
}
@@ -400,7 +403,7 @@ static void sdram_set_dpd3(const struct sdram_params *param,
struct tegra_pmc_regs *regs)
{
/* Program DPD request */
- writel(param->PmcIoDpd3Req, &regs->io_dpd3_req);
+ write32(&regs->io_dpd3_req, param->PmcIoDpd3Req);
udelay(param->PmcIoDpd3ReqWait);
}
@@ -408,27 +411,27 @@ static void sdram_set_dli_trims(const struct sdram_params *param,
struct tegra_emc_regs *regs)
{
/* Program DLI trims */
- writel(param->EmcDliTrimTxDqs0, &regs->dli_trim_txdqs0);
- writel(param->EmcDliTrimTxDqs1, &regs->dli_trim_txdqs1);
- writel(param->EmcDliTrimTxDqs2, &regs->dli_trim_txdqs2);
- writel(param->EmcDliTrimTxDqs3, &regs->dli_trim_txdqs3);
- writel(param->EmcDliTrimTxDqs4, &regs->dli_trim_txdqs4);
- writel(param->EmcDliTrimTxDqs5, &regs->dli_trim_txdqs5);
- writel(param->EmcDliTrimTxDqs6, &regs->dli_trim_txdqs6);
- writel(param->EmcDliTrimTxDqs7, &regs->dli_trim_txdqs7);
- writel(param->EmcDliTrimTxDqs8, &regs->dli_trim_txdqs8);
- writel(param->EmcDliTrimTxDqs9, &regs->dli_trim_txdqs9);
- writel(param->EmcDliTrimTxDqs10, &regs->dli_trim_txdqs10);
- writel(param->EmcDliTrimTxDqs11, &regs->dli_trim_txdqs11);
- writel(param->EmcDliTrimTxDqs12, &regs->dli_trim_txdqs12);
- writel(param->EmcDliTrimTxDqs13, &regs->dli_trim_txdqs13);
- writel(param->EmcDliTrimTxDqs14, &regs->dli_trim_txdqs14);
- writel(param->EmcDliTrimTxDqs15, &regs->dli_trim_txdqs15);
-
- writel(param->EmcCaTrainingTimingCntl1,
- &regs->ca_training_timing_cntl1);
- writel(param->EmcCaTrainingTimingCntl2,
- &regs->ca_training_timing_cntl2);
+ write32(&regs->dli_trim_txdqs0, param->EmcDliTrimTxDqs0);
+ write32(&regs->dli_trim_txdqs1, param->EmcDliTrimTxDqs1);
+ write32(&regs->dli_trim_txdqs2, param->EmcDliTrimTxDqs2);
+ write32(&regs->dli_trim_txdqs3, param->EmcDliTrimTxDqs3);
+ write32(&regs->dli_trim_txdqs4, param->EmcDliTrimTxDqs4);
+ write32(&regs->dli_trim_txdqs5, param->EmcDliTrimTxDqs5);
+ write32(&regs->dli_trim_txdqs6, param->EmcDliTrimTxDqs6);
+ write32(&regs->dli_trim_txdqs7, param->EmcDliTrimTxDqs7);
+ write32(&regs->dli_trim_txdqs8, param->EmcDliTrimTxDqs8);
+ write32(&regs->dli_trim_txdqs9, param->EmcDliTrimTxDqs9);
+ write32(&regs->dli_trim_txdqs10, param->EmcDliTrimTxDqs10);
+ write32(&regs->dli_trim_txdqs11, param->EmcDliTrimTxDqs11);
+ write32(&regs->dli_trim_txdqs12, param->EmcDliTrimTxDqs12);
+ write32(&regs->dli_trim_txdqs13, param->EmcDliTrimTxDqs13);
+ write32(&regs->dli_trim_txdqs14, param->EmcDliTrimTxDqs14);
+ write32(&regs->dli_trim_txdqs15, param->EmcDliTrimTxDqs15);
+
+ write32(&regs->ca_training_timing_cntl1,
+ param->EmcCaTrainingTimingCntl1);
+ write32(&regs->ca_training_timing_cntl2,
+ param->EmcCaTrainingTimingCntl2);
sdram_trigger_emc_timing_update(regs);
udelay(param->EmcTimingControlWait);
@@ -444,7 +447,7 @@ static void sdram_set_clock_enable_signal(const struct sdram_params *param,
* Assert dummy read of PIN register to ensure above write to PIN
* register went through. 200 is the recommended value by NVIDIA.
*/
- dummy |= readl(&regs->pin);
+ dummy |= read32(&regs->pin);
udelay(200 + param->EmcPinExtraWait);
/* Deassert reset */
@@ -453,7 +456,7 @@ static void sdram_set_clock_enable_signal(const struct sdram_params *param,
* Assert dummy read of PIN register to ensure above write to PIN
* register went through. 200 is the recommended value by NVIDIA.
*/
- dummy |= readl(&regs->pin);
+ dummy |= read32(&regs->pin);
udelay(500 + param->EmcPinExtraWait);
/* Enable clock enable signal */
@@ -462,7 +465,7 @@ static void sdram_set_clock_enable_signal(const struct sdram_params *param,
* Assert dummy read of PIN register to ensure above write to PIN
* register went through. 200 is the recommended value by NVIDIA.
*/
- dummy |= readl(&regs->pin);
+ dummy |= read32(&regs->pin);
udelay(param->EmcPinProgramWait);
if (!dummy) {
@@ -479,20 +482,20 @@ static void sdram_set_clock_enable_signal(const struct sdram_params *param,
static void sdram_init_ddr3(const struct sdram_params *param, struct tegra_emc_regs *regs)
{
/* Write mode registers */
- writel(param->EmcEmrs2, &regs->emrs2);
- writel(param->EmcEmrs3, &regs->emrs3);
- writel(param->EmcEmrs, &regs->emrs);
- writel(param->EmcMrs, &regs->mrs);
+ write32(&regs->emrs2, param->EmcEmrs2);
+ write32(&regs->emrs3, param->EmcEmrs3);
+ write32(&regs->emrs, param->EmcEmrs);
+ write32(&regs->mrs, param->EmcMrs);
if (param->EmcExtraModeRegWriteEnable) {
- writel(param->EmcMrsExtra, &regs->mrs);
+ write32(&regs->mrs, param->EmcMrsExtra);
}
- writel(param->EmcZcalInitDev0, &regs->zq_cal);
+ write32(&regs->zq_cal, param->EmcZcalInitDev0);
udelay(param->EmcZcalInitWait);
if ((param->EmcDevSelect & 2) == 0) {
- writel(param->EmcZcalInitDev1, &regs->zq_cal);
+ write32(&regs->zq_cal, param->EmcZcalInitDev1);
udelay(param->EmcZcalInitWait);
}
}
@@ -500,29 +503,30 @@ static void sdram_init_ddr3(const struct sdram_params *param, struct tegra_emc_r
static void sdram_init_lpddr3(const struct sdram_params *param, struct tegra_emc_regs *regs)
{
/* Precharge all banks. DEV_SELECTN = 0 => Select all devices */
- writel(((param->EmcDevSelect << EMC_REF_DEV_SELECTN_SHIFT) | 1), &regs->pre);
+ write32(&regs->pre,
+ ((param->EmcDevSelect << EMC_REF_DEV_SELECTN_SHIFT) | 1));
/* Send Reset MRW command */
- writel(param->EmcMrwResetCommand, &regs->mrw);
+ write32(&regs->mrw, param->EmcMrwResetCommand);
udelay(param->EmcMrwResetNInitWait);
- writel(param->EmcZcalInitDev0, &regs->mrw);
+ write32(&regs->mrw, param->EmcZcalInitDev0);
udelay(param->EmcZcalInitWait);
if ((param->EmcDevSelect & 2) == 0)
{
- writel(param->EmcZcalInitDev1, &regs->mrw);
+ write32(&regs->mrw, param->EmcZcalInitDev1);
udelay(param->EmcZcalInitWait);
}
/* Write mode registers */
- writel(param->EmcMrw2, &regs->mrw2);
- writel(param->EmcMrw1, &regs->mrw);
- writel(param->EmcMrw3, &regs->mrw3);
- writel(param->EmcMrw4, &regs->mrw4);
+ write32(&regs->mrw2, param->EmcMrw2);
+ write32(&regs->mrw, param->EmcMrw1);
+ write32(&regs->mrw3, param->EmcMrw3);
+ write32(&regs->mrw4, param->EmcMrw4);
if (param->EmcExtraModeRegWriteEnable) {
- writel(param->EmcMrwExtra, &regs->mrw);
+ write32(&regs->mrw, param->EmcMrwExtra);
}
}
@@ -546,9 +550,9 @@ static void sdram_set_zq_calibration(const struct sdram_params *param,
struct tegra_emc_regs *regs)
{
/* Start periodic ZQ calibration */
- writel(param->EmcZcalInterval, &regs->zcal_interval);
- writel(param->EmcZcalWaitCnt, &regs->zcal_wait_cnt);
- writel(param->EmcZcalMrwCmd, &regs->zcal_mrw_cmd);
+ write32(&regs->zcal_interval, param->EmcZcalInterval);
+ write32(&regs->zcal_wait_cnt, param->EmcZcalWaitCnt);
+ write32(&regs->zcal_mrw_cmd, param->EmcZcalMrwCmd);
}
static void sdram_set_refresh(const struct sdram_params *param,
@@ -566,15 +570,15 @@ static void sdram_set_refresh(const struct sdram_params *param,
}
/* Enable refresh */
- writel((param->EmcDevSelect | EMC_REFCTRL_REF_VALID_ENABLED),
- &regs->refctrl);
+ write32(&regs->refctrl,
+ (param->EmcDevSelect | EMC_REFCTRL_REF_VALID_ENABLED));
- writel(param->EmcDynSelfRefControl, &regs->dyn_self_ref_control);
- writel(param->EmcCfg, &regs->cfg);
- writel(param->EmcSelDpdCtrl, &regs->sel_dpd_ctrl);
+ write32(&regs->dyn_self_ref_control, param->EmcDynSelfRefControl);
+ write32(&regs->cfg, param->EmcCfg);
+ write32(&regs->sel_dpd_ctrl, param->EmcSelDpdCtrl);
/* Write addr swizzle lock bit */
- writel(param->EmcFbioSpare, &regs->fbio_spare);
+ write32(&regs->fbio_spare, param->EmcFbioSpare);
/* Re-trigger timing to latch power saving functions */
sdram_trigger_emc_timing_update(regs);
@@ -592,12 +596,13 @@ static void sdram_lock_carveouts(const struct sdram_params *param,
struct tegra_mc_regs *regs)
{
/* Lock carveouts, and emem_cfg registers */
- writel(param->McVideoProtectWriteAccess, &regs->video_protect_reg_ctrl);
- writel(MC_EMEM_CFG_ACCESS_CTRL_WRITE_ACCESS_DISABLED,
- &regs->emem_cfg_access_ctrl);
- writel(param->McSecCarveoutProtectWriteAccess,
- &regs->sec_carveout_reg_ctrl);
- writel(param->McMtsCarveoutRegCtrl, &regs->mts_carveout_reg_ctrl);
+ write32(&regs->video_protect_reg_ctrl,
+ param->McVideoProtectWriteAccess);
+ write32(&regs->emem_cfg_access_ctrl,
+ MC_EMEM_CFG_ACCESS_CTRL_WRITE_ACCESS_DISABLED);
+ write32(&regs->sec_carveout_reg_ctrl,
+ param->McSecCarveoutProtectWriteAccess);
+ write32(&regs->mts_carveout_reg_ctrl, param->McMtsCarveoutRegCtrl);
}
void sdram_init(const struct sdram_params *param)
@@ -653,7 +658,7 @@ void sdram_init(const struct sdram_params *param)
uint32_t sdram_get_ram_code(void)
{
struct tegra_pmc_regs *pmc = (struct tegra_pmc_regs*)TEGRA_PMC_BASE;
- return ((readl(&pmc->strapping_opt_a) &
+ return ((read32(&pmc->strapping_opt_a) &
PMC_STRAPPING_OPT_A_RAM_CODE_MASK) >>
PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT);
}
diff --git a/src/soc/nvidia/tegra132/soc.c b/src/soc/nvidia/tegra132/soc.c
index 7923f7e3cd..1003ca53a8 100644
--- a/src/soc/nvidia/tegra132/soc.c
+++ b/src/soc/nvidia/tegra132/soc.c
@@ -83,9 +83,9 @@ static void lock_down_vpr(void)
{
struct tegra_mc_regs *regs = (void *)(uintptr_t)TEGRA_MC_BASE;
- writel(0, &regs->video_protect_bom);
- writel(0, &regs->video_protect_size_mb);
- writel(1, &regs->video_protect_reg_ctrl);
+ write32(&regs->video_protect_bom, 0);
+ write32(&regs->video_protect_size_mb, 0);
+ write32(&regs->video_protect_reg_ctrl, 1);
}
static void soc_init(device_t dev)
diff --git a/src/soc/nvidia/tegra132/spi.c b/src/soc/nvidia/tegra132/spi.c
index e240700f06..33620fb202 100644
--- a/src/soc/nvidia/tegra132/spi.c
+++ b/src/soc/nvidia/tegra132/spi.c
@@ -230,7 +230,7 @@ int spi_claim_bus(struct spi_slave *slave)
else
val |= SPI_CMD1_CS_SW_VAL;
- writel(val, &regs->command1);
+ write32(&regs->command1, val);
return 0;
}
@@ -246,7 +246,7 @@ void spi_release_bus(struct spi_slave *slave)
else
val &= ~SPI_CMD1_CS_SW_VAL;
- writel(val, &regs->command1);
+ write32(&regs->command1, val);
}
static void dump_fifo_status(struct tegra_spi_channel *spi)
@@ -383,12 +383,12 @@ static int tegra_spi_pio_prepare(struct tegra_spi_channel *spi,
/* BLOCK_SIZE in SPI_DMA_BLK register applies to both DMA and
* PIO transfers */
- writel(todo - 1, &spi->regs->dma_blk);
+ write32(&spi->regs->dma_blk, todo - 1);
if (dir == SPI_SEND) {
unsigned int to_fifo = bytes;
while (to_fifo) {
- writel(*p, &spi->regs->tx_fifo);
+ write32(&spi->regs->tx_fifo, *p);
p++;
to_fifo--;
}
@@ -493,12 +493,12 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi,
/* ensure bytes to send will be visible to DMA controller */
dcache_clean_by_mva(spi->out_buf, bytes);
- writel((uintptr_t) & spi->regs->tx_fifo,
- &spi->dma_out->regs->apb_ptr);
- writel((uintptr_t)spi->out_buf, &spi->dma_out->regs->ahb_ptr);
+ write32(&spi->dma_out->regs->apb_ptr,
+ (uintptr_t) & spi->regs->tx_fifo);
+ write32(&spi->dma_out->regs->ahb_ptr, (uintptr_t)spi->out_buf);
setbits_le32(&spi->dma_out->regs->csr, APB_CSR_DIR);
setup_dma_params(spi, spi->dma_out);
- writel(wcount, &spi->dma_out->regs->wcount);
+ write32(&spi->dma_out->regs->wcount, wcount);
} else {
spi->dma_in = dma_claim();
if (!spi->dma_in)
@@ -507,16 +507,16 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi,
/* avoid data collisions */
dcache_clean_invalidate_by_mva(spi->in_buf, bytes);
- writel((uintptr_t)&spi->regs->rx_fifo,
- &spi->dma_in->regs->apb_ptr);
- writel((uintptr_t)spi->in_buf, &spi->dma_in->regs->ahb_ptr);
+ write32(&spi->dma_in->regs->apb_ptr,
+ (uintptr_t)&spi->regs->rx_fifo);
+ write32(&spi->dma_in->regs->ahb_ptr, (uintptr_t)spi->in_buf);
clrbits_le32(&spi->dma_in->regs->csr, APB_CSR_DIR);
setup_dma_params(spi, spi->dma_in);
- writel(wcount, &spi->dma_in->regs->wcount);
+ write32(&spi->dma_in->regs->wcount, wcount);
}
/* BLOCK_SIZE starts at n-1 */
- writel(todo - 1, &spi->regs->dma_blk);
+ write32(&spi->regs->dma_blk, todo - 1);
return todo;
}
diff --git a/src/soc/nvidia/tegra132/uart.c b/src/soc/nvidia/tegra132/uart.c
index 90765e1496..e7b7ca9f69 100644
--- a/src/soc/nvidia/tegra132/uart.c
+++ b/src/soc/nvidia/tegra132/uart.c
@@ -63,19 +63,19 @@ static void tegra132_uart_init(struct tegra132_uart *uart_ptr)
tegra132_uart_tx_flush(uart_ptr);
// Disable interrupts.
- writeb(0, &uart_ptr->ier);
+ write8(&uart_ptr->ier, 0);
// Force DTR and RTS to high.
- writeb(UART8250_MCR_DTR | UART8250_MCR_RTS, &uart_ptr->mcr);
+ write8(&uart_ptr->mcr, UART8250_MCR_DTR | UART8250_MCR_RTS);
// Set line configuration, access divisor latches.
- writeb(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr);
+ write8(&uart_ptr->lcr, UART8250_LCR_DLAB | line_config);
// Set the divisor.
- writeb(divisor & 0xff, &uart_ptr->dll);
- writeb((divisor >> 8) & 0xff, &uart_ptr->dlm);
+ write8(&uart_ptr->dll, divisor & 0xff);
+ write8(&uart_ptr->dlm, (divisor >> 8) & 0xff);
// Hide the divisor latches.
- writeb(line_config, &uart_ptr->lcr);
+ write8(&uart_ptr->lcr, line_config);
// Enable FIFOs, and clear receive and transmit.
- writeb(UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT,
- &uart_ptr->fcr);
+ write8(&uart_ptr->fcr,
+ UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT);
}
static unsigned char tegra132_uart_rx_byte(struct tegra132_uart *uart_ptr)
@@ -88,7 +88,7 @@ static unsigned char tegra132_uart_rx_byte(struct tegra132_uart *uart_ptr)
static void tegra132_uart_tx_byte(struct tegra132_uart *uart_ptr, unsigned char data)
{
while (!(read8(&uart_ptr->lsr) & UART8250_LSR_THRE));
- writeb(data, &uart_ptr->thr);
+ write8(&uart_ptr->thr, data);
}
static void tegra132_uart_tx_flush(struct tegra132_uart *uart_ptr)
diff --git a/src/soc/qualcomm/ipq806x/blobs_init.c b/src/soc/qualcomm/ipq806x/blobs_init.c
index a3c0cfa28e..d513d2545a 100644
--- a/src/soc/qualcomm/ipq806x/blobs_init.c
+++ b/src/soc/qualcomm/ipq806x/blobs_init.c
@@ -107,7 +107,7 @@ void start_rpm(void)
u32 ready_mask = 1 << 10;
struct stopwatch sw;
- if (readl(RPM_SIGNAL_COOKIE) == RPM_FW_MAGIC_NUM) {
+ if (read32(RPM_SIGNAL_COOKIE) == RPM_FW_MAGIC_NUM) {
printk(BIOS_INFO, "RPM appears to have already started\n");
return;
}
@@ -119,20 +119,20 @@ void start_rpm(void)
printk(BIOS_INFO, "Starting RPM\n");
/* Clear 'ready' indication. */
- writel(readl(RPM_INT_ACK) & ~ready_mask, RPM_INT_ACK);
+ write32(RPM_INT_ACK, read32(RPM_INT_ACK) & ~ready_mask);
/* Set RPM entry address */
- writel(load_addr, RPM_SIGNAL_ENTRY);
+ write32(RPM_SIGNAL_ENTRY, load_addr);
/* Set cookie */
- writel(RPM_FW_MAGIC_NUM, RPM_SIGNAL_COOKIE);
+ write32(RPM_SIGNAL_COOKIE, RPM_FW_MAGIC_NUM);
/* Wait for RPM start indication, up to 100ms. */
stopwatch_init_usecs_expire(&sw, 100000);
- while (!(readl(RPM_INT) & ready_mask))
+ while (!(read32(RPM_INT) & ready_mask))
if (stopwatch_expired(&sw))
die("RPM Initialization failed\n");
/* Acknowledge RPM initialization */
- writel(ready_mask, RPM_INT_ACK);
+ write32(RPM_INT_ACK, ready_mask);
}
#endif /* !__PRE_RAM__ */
diff --git a/src/soc/qualcomm/ipq806x/clock.c b/src/soc/qualcomm/ipq806x/clock.c
index 0b770da94f..0ffd83f032 100644
--- a/src/soc/qualcomm/ipq806x/clock.c
+++ b/src/soc/qualcomm/ipq806x/clock.c
@@ -14,7 +14,7 @@ void uart_pll_vote_clk_enable(unsigned int clk_dummy)
setbits_le32(BB_PLL_ENA_SC0_REG, BIT(8));
if (!clk_dummy)
- while((readl(PLL_LOCK_DET_STATUS_REG) & BIT(8)) == 0);
+ while((read32(PLL_LOCK_DET_STATUS_REG) & BIT(8)) == 0);
}
/**
@@ -29,7 +29,7 @@ static void uart_set_rate_mnd(unsigned int gsbi_port, unsigned int m,
/* Assert MND reset. */
setbits_le32(GSBIn_UART_APPS_NS_REG(gsbi_port), BIT(7));
/* Program M and D values. */
- writel(MD16(m, n), GSBIn_UART_APPS_MD_REG(gsbi_port));
+ write32(GSBIn_UART_APPS_MD_REG(gsbi_port), MD16(m, n));
/* Deassert MND reset. */
clrbits_le32(GSBIn_UART_APPS_NS_REG(gsbi_port), BIT(7));
}
@@ -61,25 +61,25 @@ static void uart_local_clock_enable(unsigned int gsbi_port, unsigned int n,
* set in the set_rate path because power can be saved by deferring
* the selection of a clocked source until the clock is enabled.
*/
- reg_val = readl(reg); // REG(0x29D4+(0x20*((n)-1)))
+ reg_val = read32(reg); // REG(0x29D4+(0x20*((n)-1)))
reg_val &= ~(Uart_clk_ns_mask);
uart_ns_val = NS(BIT_POS_31,BIT_POS_16,n,m, 5, 4, 3, 1, 2, 0,3);
reg_val |= (uart_ns_val & Uart_clk_ns_mask);
- writel(reg_val,reg);
+ write32(reg, reg_val);
/* enable MNCNTR_EN */
- reg_val = readl(reg);
+ reg_val = read32(reg);
reg_val |= BIT(8);
- writel(reg_val, reg);
+ write32(reg, reg_val);
/* set source to PLL8 running @384MHz */
- reg_val = readl(reg);
+ reg_val = read32(reg);
reg_val |= 0x3;
- writel(reg_val, reg);
+ write32(reg, reg_val);
/* Enable root. */
reg_val |= Uart_en_mask;
- writel(reg_val, reg);
+ write32(reg, reg_val);
uart_branch_clk_enable_reg(gsbi_port);
}
@@ -113,8 +113,8 @@ void uart_clock_config(unsigned int gsbi_port, unsigned int m,
*/
void nand_clock_config(void)
{
- writel(CLK_BRANCH_ENA(1) | ALWAYS_ON_CLK_BRANCH_ENA(1),
- EBI2_CLK_CTL_REG);
+ write32(EBI2_CLK_CTL_REG,
+ CLK_BRANCH_ENA(1) | ALWAYS_ON_CLK_BRANCH_ENA(1));
/* Wait for clock to stabilize. */
udelay(10);
@@ -126,17 +126,17 @@ void nand_clock_config(void)
void usb_clock_config(void)
{
/* Magic clock initialization numbers, nobody knows how they work... */
- writel(0x10, USB30_MASTER_CLK_CTL_REG);
- writel(0x10, USB30_1_MASTER_CLK_CTL_REG);
- writel(0x500DF, USB30_MASTER_CLK_MD);
- writel(0xE40942, USB30_MASTER_CLK_NS);
- writel(0x100D7, USB30_MOC_UTMI_CLK_MD);
- writel(0xD80942, USB30_MOC_UTMI_CLK_NS);
- writel(0x10, USB30_MOC_UTMI_CLK_CTL);
- writel(0x10, USB30_1_MOC_UTMI_CLK_CTL);
-
- writel(1 << 5 | 1 << 4 | 1 << 3 | 1 << 2 | 1 << 1 | 1 << 0 | 0,
- USB30_RESET);
+ write32(USB30_MASTER_CLK_CTL_REG, 0x10);
+ write32(USB30_1_MASTER_CLK_CTL_REG, 0x10);
+ write32(USB30_MASTER_CLK_MD, 0x500DF);
+ write32(USB30_MASTER_CLK_NS, 0xE40942);
+ write32(USB30_MOC_UTMI_CLK_MD, 0x100D7);
+ write32(USB30_MOC_UTMI_CLK_NS, 0xD80942);
+ write32(USB30_MOC_UTMI_CLK_CTL, 0x10);
+ write32(USB30_1_MOC_UTMI_CLK_CTL, 0x10);
+
+ write32(USB30_RESET,
+ 1 << 5 | 1 << 4 | 1 << 3 | 1 << 2 | 1 << 1 | 1 << 0 | 0);
udelay(5);
- writel(0, USB30_RESET); /* deassert all USB resets again */
+ write32(USB30_RESET, 0); /* deassert all USB resets again */
}
diff --git a/src/soc/qualcomm/ipq806x/gpio.c b/src/soc/qualcomm/ipq806x/gpio.c
index a0a3df9495..c40b521101 100644
--- a/src/soc/qualcomm/ipq806x/gpio.c
+++ b/src/soc/qualcomm/ipq806x/gpio.c
@@ -73,7 +73,7 @@ void gpio_tlmm_config_set(gpio_t gpio, unsigned func,
val |= (drvstr & GPIO_CFG_DRV_MASK) << GPIO_CFG_DRV_SHIFT;
val |= (enable & GPIO_CFG_OE_MASK) << GPIO_CFG_OE_SHIFT;
- writel(val, GPIO_CONFIG_ADDR(gpio));
+ write32(GPIO_CONFIG_ADDR(gpio), val);
}
/*******************************************************
@@ -99,7 +99,7 @@ void gpio_tlmm_config_get(gpio_t gpio, unsigned *func,
if (gpio_not_valid(gpio))
return;
- val = readl(addr);
+ val = read32(addr);
*pull = (val >> GPIO_CFG_PULL_SHIFT) & GPIO_CFG_PULL_MASK;
*func = (val >> GPIO_CFG_FUNC_SHIFT) & GPIO_CFG_FUNC_MASK;
@@ -122,7 +122,7 @@ int gpio_get(gpio_t gpio)
return -1;
- return (readl(GPIO_IN_OUT_ADDR(gpio)) >> GPIO_IO_IN_SHIFT) &
+ return (read32(GPIO_IN_OUT_ADDR(gpio)) >> GPIO_IO_IN_SHIFT) &
GPIO_IO_IN_MASK;
}
@@ -131,7 +131,7 @@ void gpio_set(gpio_t gpio, int value)
if (gpio_not_valid(gpio))
return;
- writel((value & 1) << GPIO_IO_OUT_SHIFT, GPIO_IN_OUT_ADDR(gpio));
+ write32(GPIO_IN_OUT_ADDR(gpio), (value & 1) << GPIO_IO_OUT_SHIFT);
}
void gpio_input_pulldown(gpio_t gpio)
diff --git a/src/soc/qualcomm/ipq806x/gsbi.c b/src/soc/qualcomm/ipq806x/gsbi.c
index 54adbe8db7..93270958a9 100644
--- a/src/soc/qualcomm/ipq806x/gsbi.c
+++ b/src/soc/qualcomm/ipq806x/gsbi.c
@@ -68,18 +68,18 @@ gsbi_return_t gsbi_init(gsbi_id_t gsbi_id, gsbi_protocol_t protocol)
if (!gsbi_ctl)
return GSBI_ID_ERROR;
- writel((1 << GSBI_HCLK_CTL_GATE_ENA) | (1 << GSBI_HCLK_CTL_BRANCH_ENA),
- GSBI_HCLK_CTL(gsbi_id));
+ write32(GSBI_HCLK_CTL(gsbi_id),
+ (1 << GSBI_HCLK_CTL_GATE_ENA) | (1 << GSBI_HCLK_CTL_BRANCH_ENA));
if (gsbi_init_board(gsbi_id))
return GSBI_UNSUPPORTED;
- writel(0, GSBI_QUP_APSS_NS_REG(gsbi_id));
- writel(0, GSBI_QUP_APSS_MD_REG(gsbi_id));
+ write32(GSBI_QUP_APSS_NS_REG(gsbi_id), 0);
+ write32(GSBI_QUP_APSS_MD_REG(gsbi_id), 0);
reg_val = ((m & GSBI_QUP_APPS_M_MASK) << GSBI_QUP_APPS_M_SHFT) |
((~n & GSBI_QUP_APPS_D_MASK) << GSBI_QUP_APPS_D_SHFT);
- writel(reg_val, GSBI_QUP_APSS_MD_REG(gsbi_id));
+ write32(GSBI_QUP_APSS_MD_REG(gsbi_id), reg_val);
reg_val = (((~(n - m)) & GSBI_QUP_APPS_N_MASK) <<
GSBI_QUP_APPS_N_SHFT) |
@@ -88,18 +88,18 @@ gsbi_return_t gsbi_init(gsbi_id_t gsbi_id, gsbi_protocol_t protocol)
(((pre_div - 1) & GSBI_QUP_APPS_PRE_DIV_MSK) <<
GSBI_QUP_APPS_PRE_DIV_SFT) |
(src & GSBI_QUP_APPS_SRC_SEL_MSK);
- writel(reg_val, GSBI_QUP_APSS_NS_REG(gsbi_id));
+ write32(GSBI_QUP_APSS_NS_REG(gsbi_id), reg_val);
reg_val |= (1 << GSBI_QUP_APPS_ROOT_ENA_SFT) |
(1 << GSBI_QUP_APPS_MNCTR_EN_SFT);
- writel(reg_val, GSBI_QUP_APSS_NS_REG(gsbi_id));
+ write32(GSBI_QUP_APSS_NS_REG(gsbi_id), reg_val);
reg_val |= (1 << GSBI_QUP_APPS_BRANCH_ENA_SFT);
- writel(reg_val, GSBI_QUP_APSS_NS_REG(gsbi_id));
+ write32(GSBI_QUP_APSS_NS_REG(gsbi_id), reg_val);
/*Select i2c protocol*/
- writel(((GSBI_CTL_PROTO_I2C & GSBI_CTL_PROTO_CODE_MSK) <<
- GSBI_CTL_PROTO_CODE_SFT), gsbi_ctl);
+ write32(gsbi_ctl,
+ ((GSBI_CTL_PROTO_I2C & GSBI_CTL_PROTO_CODE_MSK) << GSBI_CTL_PROTO_CODE_SFT));
return GSBI_SUCCESS;
}
diff --git a/src/soc/qualcomm/ipq806x/lcc.c b/src/soc/qualcomm/ipq806x/lcc.c
index 978526d8e7..d577487618 100644
--- a/src/soc/qualcomm/ipq806x/lcc.c
+++ b/src/soc/qualcomm/ipq806x/lcc.c
@@ -129,43 +129,43 @@ static int lcc_init_enable_pll0(Ipq806xLccClocks *bus)
regval = 0;
regval = 15 << LCC_PLL0_L_SHIFT & LCC_PLL0_L_MASK;
- writel(regval, &pll0_regs->l_val);
+ write32(&pll0_regs->l_val, regval);
regval = 0;
regval = 145 << LCC_PLL0_M_SHIFT & LCC_PLL0_M_MASK;
- writel(regval, &pll0_regs->m_val);
+ write32(&pll0_regs->m_val, regval);
regval = 0;
regval = 199 << LCC_PLL0_N_SHIFT & LCC_PLL0_N_MASK;
- writel(regval, &pll0_regs->n_val);
+ write32(&pll0_regs->n_val, regval);
regval = 0;
regval |= LCC_PLL0_CFG_LV_MAIN_ENABLE;
regval |= LCC_PLL0_CFG_FRAC_ENABLE;
- writel(regval, &pll0_regs->config);
+ write32(&pll0_regs->config, regval);
regval = 0;
regval |= LCC_PLL_PCLK_SRC_PRI;
- writel(regval, &pll_regs->pri);
+ write32(&pll_regs->pri, regval);
regval = 0;
regval |= 1 << LCC_PLL0_MODE_BIAS_CNT_SHIFT &
LCC_PLL0_MODE_BIAS_CNT_MASK;
regval |= 8 << LCC_PLL0_MODE_LOCK_CNT_SHIFT &
LCC_PLL0_MODE_LOCK_CNT_MASK;
- writel(regval, &pll0_regs->mode);
+ write32(&pll0_regs->mode, regval);
- regval = readl(&gcc_regs->apcs);
+ regval = read32(&gcc_regs->apcs);
regval |= GCC_PLL_APCS_PLL4_ENABLE;
- writel(regval, &gcc_regs->apcs);
+ write32(&gcc_regs->apcs, regval);
- regval = readl(&pll0_regs->mode);
+ regval = read32(&pll0_regs->mode);
regval |= LCC_PLL0_MODE_FSM_VOTE_ENABLE;
- writel(regval, &pll0_regs->mode);
+ write32(&pll0_regs->mode, regval);
mdelay(1);
- regval = readl(&pll0_regs->status);
+ regval = read32(&pll0_regs->status);
if (regval & LCC_PLL0_STAT_ACTIVE_MASK)
return 0;
@@ -182,7 +182,7 @@ static int lcc_init_enable_ahbix(Ipq806xLccClocks *bus)
regval |= 1 << LCC_AHBIX_MD_M_VAL_SHIFT & LCC_AHBIX_MD_M_VAL_MASK;
regval |= 252 << LCC_AHBIX_MD_NOT_2D_VAL_SHIFT &
LCC_AHBIX_MD_NOT_2D_VAL_MASK;
- writel(regval, &ahbix_regs->md);
+ write32(&ahbix_regs->md, regval);
regval = 0;
regval |= 253 << LCC_AHBIX_NS_N_VAL_SHIFT & LCC_AHBIX_NS_N_VAL_MASK;
@@ -193,11 +193,11 @@ static int lcc_init_enable_ahbix(Ipq806xLccClocks *bus)
regval |= LCC_AHBIX_NS_MNC_MODE_DUAL;
regval |= LCC_AHBIX_NS_PREDIV_BYPASS;
regval |= LCC_AHBIX_NS_MN_SRC_LPA;
- writel(regval, &ahbix_regs->ns);
+ write32(&ahbix_regs->ns, regval);
mdelay(1);
- regval = readl(&ahbix_regs->status);
+ regval = read32(&ahbix_regs->status);
if (regval & LCC_AHBIX_STAT_AIF_CLK_MASK)
return 0;
@@ -248,7 +248,7 @@ static int lcc_init_mi2s(Ipq806xLccClocks *bus, unsigned freq)
regval |= m << LCC_MI2S_MD_M_VAL_SHIFT & LCC_MI2S_MD_M_VAL_MASK;
regval |= d << LCC_MI2S_MD_NOT_2D_VAL_SHIFT &
LCC_MI2S_MD_NOT_2D_VAL_MASK;
- writel(regval, &mi2s_regs->md);
+ write32(&mi2s_regs->md, regval);
regval = 0;
regval |= n << LCC_MI2S_NS_N_VAL_SHIFT & LCC_MI2S_NS_N_VAL_MASK;
@@ -258,7 +258,7 @@ static int lcc_init_mi2s(Ipq806xLccClocks *bus, unsigned freq)
regval |= LCC_MI2S_NS_MNC_MODE_DUAL;
regval |= pd;
regval |= LCC_MI2S_NS_MN_SRC_LPA;
- writel(regval, &mi2s_regs->ns);
+ write32(&mi2s_regs->ns, regval);
return 0;
}
@@ -268,14 +268,14 @@ static int lcc_enable_mi2s(Ipq806xLccClocks *bus)
Ipq806xLccMi2sRegs *mi2s_regs = bus->lcc_mi2s_regs;
uint32_t regval;
- regval = readl(&mi2s_regs->ns);
+ regval = read32(&mi2s_regs->ns);
regval |= LCC_MI2S_NS_OSR_CXC_ENABLE;
regval |= LCC_MI2S_NS_BIT_CXC_ENABLE;
- writel(regval, &mi2s_regs->ns);
+ write32(&mi2s_regs->ns, regval);
udelay(10);
- regval = readl(&mi2s_regs->status);
+ regval = read32(&mi2s_regs->status);
if (regval & LCC_MI2S_STAT_OSR_CLK_MASK)
if (regval & LCC_MI2S_STAT_BIT_CLK_MASK)
return 0;
diff --git a/src/soc/qualcomm/ipq806x/qup.c b/src/soc/qualcomm/ipq806x/qup.c
index 25adfc18db..bc78e7c67a 100644
--- a/src/soc/qualcomm/ipq806x/qup.c
+++ b/src/soc/qualcomm/ipq806x/qup.c
@@ -51,9 +51,9 @@ static unsigned gsbi_qup_base[] = {
static qup_return_t qup_i2c_master_status(gsbi_id_t gsbi_id)
{
- uint32_t reg_val = readl(QUP_ADDR(gsbi_id, QUP_I2C_MASTER_STATUS));
+ uint32_t reg_val = read32(QUP_ADDR(gsbi_id, QUP_I2C_MASTER_STATUS));
- if (readl(QUP_ADDR(gsbi_id, QUP_ERROR_FLAGS)))
+ if (read32(QUP_ADDR(gsbi_id, QUP_ERROR_FLAGS)))
return QUP_ERR_XFER_FAIL;
if (reg_val & QUP_I2C_INVALID_READ_ADDR)
return QUP_ERR_I2C_INVALID_SLAVE_ADDR;
@@ -77,7 +77,7 @@ static int check_bit_state(uint32_t *reg, int wait_for)
{
unsigned int count = TIMEOUT_CNT;
- while ((readl(reg) & (QUP_STATE_VALID_MASK | QUP_STATE_MASK)) !=
+ while ((read32(reg) & (QUP_STATE_VALID_MASK | QUP_STATE_MASK)) !=
(QUP_STATE_VALID | wait_for)) {
if (count == 0)
return QUP_ERR_TIMEOUT;
@@ -103,14 +103,14 @@ qup_return_t qup_reset_i2c_master_status(gsbi_id_t gsbi_id)
* Bit31-25, Bit1 and Bit0 are reserved.
*/
//TODO: Define each status bit. OR all status bits in a single macro.
- writel(0x3FFFFFC, QUP_ADDR(gsbi_id, QUP_I2C_MASTER_STATUS));
+ write32(QUP_ADDR(gsbi_id, QUP_I2C_MASTER_STATUS), 0x3FFFFFC);
return QUP_SUCCESS;
}
static qup_return_t qup_reset_master_status(gsbi_id_t gsbi_id)
{
- writel(0x7C, QUP_ADDR(gsbi_id, QUP_ERROR_FLAGS));
- writel(0x7C, QUP_ADDR(gsbi_id, QUP_ERROR_FLAGS_EN));
+ write32(QUP_ADDR(gsbi_id, QUP_ERROR_FLAGS), 0x7C);
+ write32(QUP_ADDR(gsbi_id, QUP_ERROR_FLAGS_EN), 0x7C);
qup_reset_i2c_master_status(gsbi_id);
return QUP_SUCCESS;
}
@@ -120,7 +120,7 @@ static qup_return_t qup_fifo_wait_for(gsbi_id_t gsbi_id, uint32_t status)
qup_return_t ret = QUP_ERR_UNDEFINED;
unsigned int count = TIMEOUT_CNT;
- while (!(readl(QUP_ADDR(gsbi_id, QUP_OPERATIONAL)) & status)) {
+ while (!(read32(QUP_ADDR(gsbi_id, QUP_OPERATIONAL)) & status)) {
ret = qup_i2c_master_status(gsbi_id);
if (ret)
return ret;
@@ -137,7 +137,7 @@ static qup_return_t qup_fifo_wait_while(gsbi_id_t gsbi_id, uint32_t status)
qup_return_t ret = QUP_ERR_UNDEFINED;
unsigned int count = TIMEOUT_CNT;
- while (readl(QUP_ADDR(gsbi_id, QUP_OPERATIONAL)) & status) {
+ while (read32(QUP_ADDR(gsbi_id, QUP_OPERATIONAL)) & status) {
ret = qup_i2c_master_status(gsbi_id);
if (ret)
return ret;
@@ -161,16 +161,16 @@ static qup_return_t qup_i2c_write_fifo(gsbi_id_t gsbi_id, qup_data_t *p_tx_obj,
qup_reset_master_status(gsbi_id);
qup_set_state(gsbi_id, QUP_STATE_RUN);
- writel((QUP_I2C_START_SEQ | QUP_I2C_ADDR(addr)),
- QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO));
+ write32(QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO),
+ (QUP_I2C_START_SEQ | QUP_I2C_ADDR(addr)));
while (data_len) {
if (data_len == 1 && stop_seq) {
- writel((QUP_I2C_STOP_SEQ | QUP_I2C_DATA(data_ptr[idx])),
- QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO));
+ write32(QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO),
+ (QUP_I2C_STOP_SEQ | QUP_I2C_DATA(data_ptr[idx])));
} else {
- writel((QUP_I2C_DATA_SEQ | QUP_I2C_DATA(data_ptr[idx])),
- QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO));
+ write32(QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO),
+ (QUP_I2C_DATA_SEQ | QUP_I2C_DATA(data_ptr[idx])));
}
data_len--;
idx++;
@@ -187,10 +187,10 @@ static qup_return_t qup_i2c_write_fifo(gsbi_id_t gsbi_id, qup_data_t *p_tx_obj,
means that software knows to return to fill the output
FIFO with data.
*/
- if (readl(QUP_ADDR(gsbi_id, QUP_OPERATIONAL)) &
+ if (read32(QUP_ADDR(gsbi_id, QUP_OPERATIONAL)) &
OUTPUT_SERVICE_FLAG) {
- writel(OUTPUT_SERVICE_FLAG,
- QUP_ADDR(gsbi_id, QUP_OPERATIONAL));
+ write32(QUP_ADDR(gsbi_id, QUP_OPERATIONAL),
+ OUTPUT_SERVICE_FLAG);
}
}
@@ -234,17 +234,17 @@ static qup_return_t qup_i2c_read_fifo(gsbi_id_t gsbi_id, qup_data_t *p_tx_obj)
qup_reset_master_status(gsbi_id);
qup_set_state(gsbi_id, QUP_STATE_RUN);
- writel((QUP_I2C_START_SEQ | (QUP_I2C_ADDR(addr) | QUP_I2C_SLAVE_READ)),
- QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO));
+ write32(QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO),
+ (QUP_I2C_START_SEQ | (QUP_I2C_ADDR(addr) | QUP_I2C_SLAVE_READ)));
- writel((QUP_I2C_RECV_SEQ | data_len),
- QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO));
+ write32(QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO),
+ (QUP_I2C_RECV_SEQ | data_len));
ret = qup_fifo_wait_while(gsbi_id, OUTPUT_FIFO_NOT_EMPTY);
if (ret)
return ret;
- writel(OUTPUT_SERVICE_FLAG, QUP_ADDR(gsbi_id, QUP_OPERATIONAL));
+ write32(QUP_ADDR(gsbi_id, QUP_OPERATIONAL), OUTPUT_SERVICE_FLAG);
while (data_len) {
uint32_t data;
@@ -253,7 +253,7 @@ static qup_return_t qup_i2c_read_fifo(gsbi_id_t gsbi_id, qup_data_t *p_tx_obj)
if (ret)
return ret;
- data = readl(QUP_ADDR(gsbi_id, QUP_INPUT_FIFO));
+ data = read32(QUP_ADDR(gsbi_id, QUP_INPUT_FIFO));
/*
* Process tag and corresponding data value. For I2C master
@@ -268,8 +268,8 @@ static qup_return_t qup_i2c_read_fifo(gsbi_id_t gsbi_id, qup_data_t *p_tx_obj)
data_ptr[idx] = QUP_I2C_DATA(data);
idx++;
data_len--;
- writel(INPUT_SERVICE_FLAG,
- QUP_ADDR(gsbi_id, QUP_OPERATIONAL));
+ write32(QUP_ADDR(gsbi_id, QUP_OPERATIONAL),
+ INPUT_SERVICE_FLAG);
} else if (QUP_I2C_MI_TAG(data) == QUP_I2C_MISTOP_SEQ) {
/* Tag: MISTOP: Last byte of master input. */
data_ptr[idx] = QUP_I2C_DATA(data);
@@ -282,7 +282,7 @@ static qup_return_t qup_i2c_read_fifo(gsbi_id_t gsbi_id, qup_data_t *p_tx_obj)
}
}
- writel(INPUT_SERVICE_FLAG, QUP_ADDR(gsbi_id, QUP_OPERATIONAL));
+ write32(QUP_ADDR(gsbi_id, QUP_OPERATIONAL), INPUT_SERVICE_FLAG);
p_tx_obj->p.iic.data_len = idx;
qup_set_state(gsbi_id, QUP_STATE_PAUSE);
@@ -316,7 +316,7 @@ qup_return_t qup_init(gsbi_id_t gsbi_id, const qup_config_t *config_ptr)
uint32_t reg_val;
/* Reset the QUP core.*/
- writel(0x1, QUP_ADDR(gsbi_id, QUP_SW_RESET));
+ write32(QUP_ADDR(gsbi_id, QUP_SW_RESET), 0x1);
/*Wait till the reset takes effect */
ret = qup_wait_for_state(gsbi_id, QUP_STATE_RESET);
@@ -324,7 +324,7 @@ qup_return_t qup_init(gsbi_id_t gsbi_id, const qup_config_t *config_ptr)
goto bailout;
/* Reset the config */
- writel(0, QUP_ADDR(gsbi_id, QUP_CONFIG));
+ write32(QUP_ADDR(gsbi_id, QUP_CONFIG), 0);
/*Program the config register*/
/*Set N value*/
@@ -340,10 +340,10 @@ qup_return_t qup_init(gsbi_id_t gsbi_id, const qup_config_t *config_ptr)
ret = QUP_ERR_UNSUPPORTED;
goto bailout;
}
- writel(reg_val, QUP_ADDR(gsbi_id, QUP_CONFIG));
+ write32(QUP_ADDR(gsbi_id, QUP_CONFIG), reg_val);
/*Reset i2c clk cntl register*/
- writel(0, QUP_ADDR(gsbi_id, QUP_I2C_MASTER_CLK_CTL));
+ write32(QUP_ADDR(gsbi_id, QUP_I2C_MASTER_CLK_CTL), 0);
/*Set QUP IO Mode*/
switch (config_ptr->mode) {
@@ -358,14 +358,14 @@ qup_return_t qup_init(gsbi_id_t gsbi_id, const qup_config_t *config_ptr)
ret = QUP_ERR_UNSUPPORTED;
goto bailout;
}
- writel(reg_val, QUP_ADDR(gsbi_id, QUP_IO_MODES));
+ write32(QUP_ADDR(gsbi_id, QUP_IO_MODES), reg_val);
/*Set i2c clk cntl*/
reg_val = (QUP_DIVIDER_MIN_VAL << QUP_HS_DIVIDER_SHFT);
reg_val |= ((((config_ptr->src_frequency / config_ptr->clk_frequency)
/ 2) - QUP_DIVIDER_MIN_VAL) &
QUP_FS_DIVIDER_MASK);
- writel(reg_val, QUP_ADDR(gsbi_id, QUP_I2C_MASTER_CLK_CTL));
+ write32(QUP_ADDR(gsbi_id, QUP_I2C_MASTER_CLK_CTL), reg_val);
bailout:
if (ret)
@@ -377,7 +377,7 @@ bailout:
qup_return_t qup_set_state(gsbi_id_t gsbi_id, uint32_t state)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
- unsigned curr_state = readl(QUP_ADDR(gsbi_id, QUP_STATE));
+ unsigned curr_state = read32(QUP_ADDR(gsbi_id, QUP_STATE));
if ((state >= QUP_STATE_RESET && state <= QUP_STATE_PAUSE)
&& (curr_state & QUP_STATE_VALID_MASK)) {
@@ -387,10 +387,10 @@ qup_return_t qup_set_state(gsbi_id_t gsbi_id, uint32_t state)
* transition to complete.
*/
if (QUP_STATE_PAUSE == curr_state && QUP_STATE_RESET == state) {
- writel(0x2, QUP_ADDR(gsbi_id, QUP_STATE));
- writel(0x2, QUP_ADDR(gsbi_id, QUP_STATE));
+ write32(QUP_ADDR(gsbi_id, QUP_STATE), 0x2);
+ write32(QUP_ADDR(gsbi_id, QUP_STATE), 0x2);
} else {
- writel(state, QUP_ADDR(gsbi_id, QUP_STATE));
+ write32(QUP_ADDR(gsbi_id, QUP_STATE), state);
}
ret = qup_wait_for_state(gsbi_id, state);
}
@@ -402,7 +402,7 @@ static qup_return_t qup_i2c_send_data(gsbi_id_t gsbi_id, qup_data_t *p_tx_obj,
uint8_t stop_seq)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
- uint8_t mode = (readl(QUP_ADDR(gsbi_id, QUP_IO_MODES)) >>
+ uint8_t mode = (read32(QUP_ADDR(gsbi_id, QUP_IO_MODES)) >>
QUP_OUTPUT_MODE_SHFT) & QUP_MODE_MASK;
ret = qup_i2c_write(gsbi_id, mode, p_tx_obj, stop_seq);
@@ -423,7 +423,7 @@ qup_return_t qup_send_data(gsbi_id_t gsbi_id, qup_data_t *p_tx_obj,
{
qup_return_t ret = QUP_ERR_UNDEFINED;
- if (p_tx_obj->protocol == ((readl(QUP_ADDR(gsbi_id, QUP_CONFIG)) >>
+ if (p_tx_obj->protocol == ((read32(QUP_ADDR(gsbi_id, QUP_CONFIG)) >>
QUP_MINI_CORE_PROTO_SHFT) & QUP_MINI_CORE_PROTO_MASK)) {
switch (p_tx_obj->protocol) {
case QUP_MINICORE_I2C_MASTER:
@@ -440,7 +440,7 @@ qup_return_t qup_send_data(gsbi_id_t gsbi_id, qup_data_t *p_tx_obj,
static qup_return_t qup_i2c_recv_data(gsbi_id_t gsbi_id, qup_data_t *p_rx_obj)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
- uint8_t mode = (readl(QUP_ADDR(gsbi_id, QUP_IO_MODES)) >>
+ uint8_t mode = (read32(QUP_ADDR(gsbi_id, QUP_IO_MODES)) >>
QUP_INPUT_MODE_SHFT) & QUP_MODE_MASK;
ret = qup_i2c_read(gsbi_id, mode, p_rx_obj);
@@ -460,7 +460,7 @@ qup_return_t qup_recv_data(gsbi_id_t gsbi_id, qup_data_t *p_rx_obj)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
- if (p_rx_obj->protocol == ((readl(QUP_ADDR(gsbi_id, QUP_CONFIG)) >>
+ if (p_rx_obj->protocol == ((read32(QUP_ADDR(gsbi_id, QUP_CONFIG)) >>
QUP_MINI_CORE_PROTO_SHFT) & QUP_MINI_CORE_PROTO_MASK)) {
switch (p_rx_obj->protocol) {
case QUP_MINICORE_I2C_MASTER:
diff --git a/src/soc/qualcomm/ipq806x/spi.c b/src/soc/qualcomm/ipq806x/spi.c
index b374f17537..4a353130e1 100644
--- a/src/soc/qualcomm/ipq806x/spi.c
+++ b/src/soc/qualcomm/ipq806x/spi.c
@@ -285,7 +285,7 @@ static void CS_change(int port_num, int cs_num, int enable)
val &= (~(1 << GPIO_OUTPUT));
if (!enable)
val |= (1 << GPIO_OUTPUT);
- writel(val, addr);
+ write32(addr, val);
}
/*
diff --git a/src/soc/qualcomm/ipq806x/uart.c b/src/soc/qualcomm/ipq806x/uart.c
index ebe1913734..c9ef77014c 100644
--- a/src/soc/qualcomm/ipq806x/uart.c
+++ b/src/soc/qualcomm/ipq806x/uart.c
@@ -89,22 +89,22 @@ static const uart_params_t uart_board_param = {
static unsigned int msm_boot_uart_dm_init_rx_transfer(void *uart_dm_base)
{
/* Reset receiver */
- writel(MSM_BOOT_UART_DM_CMD_RESET_RX,
- MSM_BOOT_UART_DM_CR(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_CR(uart_dm_base),
+ MSM_BOOT_UART_DM_CMD_RESET_RX);
/* Enable receiver */
- writel(MSM_BOOT_UART_DM_CR_RX_ENABLE,
- MSM_BOOT_UART_DM_CR(uart_dm_base));
- writel(MSM_BOOT_UART_DM_DMRX_DEF_VALUE,
- MSM_BOOT_UART_DM_DMRX(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_CR(uart_dm_base),
+ MSM_BOOT_UART_DM_CR_RX_ENABLE);
+ write32(MSM_BOOT_UART_DM_DMRX(uart_dm_base),
+ MSM_BOOT_UART_DM_DMRX_DEF_VALUE);
/* Clear stale event */
- writel(MSM_BOOT_UART_DM_CMD_RES_STALE_INT,
- MSM_BOOT_UART_DM_CR(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_CR(uart_dm_base),
+ MSM_BOOT_UART_DM_CMD_RES_STALE_INT);
/* Enable stale event */
- writel(MSM_BOOT_UART_DM_GCMD_ENA_STALE_EVT,
- MSM_BOOT_UART_DM_CR(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_CR(uart_dm_base),
+ MSM_BOOT_UART_DM_GCMD_ENA_STALE_EVT);
return MSM_BOOT_UART_DM_E_SUCCESS;
}
@@ -200,17 +200,17 @@ void uart_tx_byte(int idx, unsigned char data)
void *base = uart_board_param.uart_dm_base;
/* Wait until transmit FIFO is empty. */
- while (!(readl(MSM_BOOT_UART_DM_SR(base)) &
+ while (!(read32(MSM_BOOT_UART_DM_SR(base)) &
MSM_BOOT_UART_DM_SR_TXEMT))
udelay(1);
/*
* TX FIFO is ready to accept new character(s). First write number of
* characters to be transmitted.
*/
- writel(num_of_chars, MSM_BOOT_UART_DM_NO_CHARS_FOR_TX(base));
+ write32(MSM_BOOT_UART_DM_NO_CHARS_FOR_TX(base), num_of_chars);
/* And now write the character(s) */
- writel(tx_data, MSM_BOOT_UART_DM_TF(base, 0));
+ write32(MSM_BOOT_UART_DM_TF(base, 0), tx_data);
}
#endif /* CONFIG_SERIAL_UART */
@@ -220,12 +220,12 @@ void uart_tx_byte(int idx, unsigned char data)
*/
static unsigned int msm_boot_uart_dm_reset(void *base)
{
- writel(MSM_BOOT_UART_DM_CMD_RESET_RX, MSM_BOOT_UART_DM_CR(base));
- writel(MSM_BOOT_UART_DM_CMD_RESET_TX, MSM_BOOT_UART_DM_CR(base));
- writel(MSM_BOOT_UART_DM_CMD_RESET_ERR_STAT,
- MSM_BOOT_UART_DM_CR(base));
- writel(MSM_BOOT_UART_DM_CMD_RES_TX_ERR, MSM_BOOT_UART_DM_CR(base));
- writel(MSM_BOOT_UART_DM_CMD_RES_STALE_INT, MSM_BOOT_UART_DM_CR(base));
+ write32(MSM_BOOT_UART_DM_CR(base), MSM_BOOT_UART_DM_CMD_RESET_RX);
+ write32(MSM_BOOT_UART_DM_CR(base), MSM_BOOT_UART_DM_CMD_RESET_TX);
+ write32(MSM_BOOT_UART_DM_CR(base),
+ MSM_BOOT_UART_DM_CMD_RESET_ERR_STAT);
+ write32(MSM_BOOT_UART_DM_CR(base), MSM_BOOT_UART_DM_CMD_RES_TX_ERR);
+ write32(MSM_BOOT_UART_DM_CR(base), MSM_BOOT_UART_DM_CMD_RES_STALE_INT);
return MSM_BOOT_UART_DM_E_SUCCESS;
}
@@ -238,40 +238,40 @@ static unsigned int msm_boot_uart_dm_init(void *uart_dm_base)
{
/* Configure UART mode registers MR1 and MR2 */
/* Hardware flow control isn't supported */
- writel(0x0, MSM_BOOT_UART_DM_MR1(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_MR1(uart_dm_base), 0x0);
/* 8-N-1 configuration: 8 data bits - No parity - 1 stop bit */
- writel(MSM_BOOT_UART_DM_8_N_1_MODE,
- MSM_BOOT_UART_DM_MR2(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_MR2(uart_dm_base),
+ MSM_BOOT_UART_DM_8_N_1_MODE);
/* Configure Interrupt Mask register IMR */
- writel(MSM_BOOT_UART_DM_IMR_ENABLED,
- MSM_BOOT_UART_DM_IMR(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_IMR(uart_dm_base),
+ MSM_BOOT_UART_DM_IMR_ENABLED);
/*
* Configure Tx and Rx watermarks configuration registers
* TX watermark value is set to 0 - interrupt is generated when
* FIFO level is less than or equal to 0
*/
- writel(MSM_BOOT_UART_DM_TFW_VALUE,
- MSM_BOOT_UART_DM_TFWR(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_TFWR(uart_dm_base),
+ MSM_BOOT_UART_DM_TFW_VALUE);
/* RX watermark value */
- writel(MSM_BOOT_UART_DM_RFW_VALUE,
- MSM_BOOT_UART_DM_RFWR(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_RFWR(uart_dm_base),
+ MSM_BOOT_UART_DM_RFW_VALUE);
/* Configure Interrupt Programming Register */
/* Set initial Stale timeout value */
- writel(MSM_BOOT_UART_DM_STALE_TIMEOUT_LSB,
- MSM_BOOT_UART_DM_IPR(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_IPR(uart_dm_base),
+ MSM_BOOT_UART_DM_STALE_TIMEOUT_LSB);
/* Configure IRDA if required */
/* Disabling IRDA mode */
- writel(0x0, MSM_BOOT_UART_DM_IRDA(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_IRDA(uart_dm_base), 0x0);
/* Configure hunt character value in HCR register */
/* Keep it in reset state */
- writel(0x0, MSM_BOOT_UART_DM_HCR(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_HCR(uart_dm_base), 0x0);
/*
* Configure Rx FIFO base address
@@ -286,11 +286,11 @@ static unsigned int msm_boot_uart_dm_init(void *uart_dm_base)
/* Enable/Disable Rx/Tx DM interfaces */
/* Data Mover not currently utilized. */
- writel(0x0, MSM_BOOT_UART_DM_DMEN(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_DMEN(uart_dm_base), 0x0);
/* Enable transmitter */
- writel(MSM_BOOT_UART_DM_CR_TX_ENABLE,
- MSM_BOOT_UART_DM_CR(uart_dm_base));
+ write32(MSM_BOOT_UART_DM_CR(uart_dm_base),
+ MSM_BOOT_UART_DM_CR_TX_ENABLE);
/* Initialize Receive Path */
msm_boot_uart_dm_init_rx_transfer(uart_dm_base);
@@ -311,7 +311,7 @@ void uart_init(int idx)
dm_base = uart_board_param.uart_dm_base;
- if (readl(MSM_BOOT_UART_DM_CSR(dm_base)) == UART_DM_CLK_RX_TX_BIT_RATE)
+ if (read32(MSM_BOOT_UART_DM_CSR(dm_base)) == UART_DM_CLK_RX_TX_BIT_RATE)
return; /* UART must have been already initialized. */
gsbi_base = uart_board_param.uart_gsbi_base;
@@ -325,10 +325,9 @@ void uart_init(int idx)
uart_board_param.mnd_value.d_value,
0);
- writel(GSBI_PROTOCOL_CODE_I2C_UART <<
- GSBI_CTRL_REG_PROTOCOL_CODE_S,
- GSBI_CTRL_REG(gsbi_base));
- writel(UART_DM_CLK_RX_TX_BIT_RATE, MSM_BOOT_UART_DM_CSR(dm_base));
+ write32(GSBI_CTRL_REG(gsbi_base),
+ GSBI_PROTOCOL_CODE_I2C_UART << GSBI_CTRL_REG_PROTOCOL_CODE_S);
+ write32(MSM_BOOT_UART_DM_CSR(dm_base), UART_DM_CLK_RX_TX_BIT_RATE);
/* Intialize UART_DM */
msm_boot_uart_dm_init(dm_base);
@@ -355,7 +354,7 @@ void uart_tx_flush(int idx)
{
void *base = uart_board_param.uart_dm_base;
- while (!(readl(MSM_BOOT_UART_DM_SR(base)) &
+ while (!(read32(MSM_BOOT_UART_DM_SR(base)) &
MSM_BOOT_UART_DM_SR_TXEMT))
;
}
diff --git a/src/soc/qualcomm/ipq806x/usb.c b/src/soc/qualcomm/ipq806x/usb.c
index 69b3998624..d7dac7243c 100644
--- a/src/soc/qualcomm/ipq806x/usb.c
+++ b/src/soc/qualcomm/ipq806x/usb.c
@@ -101,16 +101,16 @@ static struct usb_dwc3 * const usb_host2_dwc3 = (void *)USB_HOST2_DWC3_BASE;
static void setup_dwc3(struct usb_dwc3 *dwc3)
{
- writel(0x1 << 31 | 0x1 << 25 | 0x1 << 24 | 0x1 << 19 | 0x1 << 18 | 0x1 << 1 | 0x1 << 0 | 0,
- &dwc3->usb3pipectl);
+ write32(&dwc3->usb3pipectl,
+ 0x1 << 31 | 0x1 << 25 | 0x1 << 24 | 0x1 << 19 | 0x1 << 18 | 0x1 << 1 | 0x1 << 0 | 0);
- writel(0x1 << 31 | 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0,
- &dwc3->usb2phycfg);
+ write32(&dwc3->usb2phycfg,
+ 0x1 << 31 | 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0);
- writel(0x2 << 19 | 0x1 << 16 | 0x1 << 12 | 0x1 << 11 | 0x1 << 10 | 0x1 << 2 | 0,
- &dwc3->ctl);
+ write32(&dwc3->ctl,
+ 0x2 << 19 | 0x1 << 16 | 0x1 << 12 | 0x1 << 11 | 0x1 << 10 | 0x1 << 2 | 0);
- writel(0x32 << 22 | 0x1 << 15 | 0x10 << 0 | 0, &dwc3->uctl);
+ write32(&dwc3->uctl, 0x32 << 22 | 0x1 << 15 | 0x10 << 0 | 0);
udelay(5);
@@ -121,16 +121,16 @@ static void setup_dwc3(struct usb_dwc3 *dwc3)
static void setup_phy(struct usb_qc_phy *phy)
{
- writel(0x1 << 24 | 0x1 << 8 | 0x1 << 7 | 0x19 << 0 | 0,
- &phy->ss_phy_ctrl);
+ write32(&phy->ss_phy_ctrl,
+ 0x1 << 24 | 0x1 << 8 | 0x1 << 7 | 0x19 << 0 | 0);
- writel(0x1 << 26 | 0x1 << 25 | 0x1 << 24 | 0x1 << 21 | 0x1 << 20 | 0x1 << 18 | 0x1 << 17 | 0x1 << 11 | 0x1 << 9 | 0x1 << 8 | 0x1 << 7 | 0x7 << 4 | 0x1 << 1 | 0,
- &phy->hs_phy_ctrl);
+ write32(&phy->hs_phy_ctrl,
+ 0x1 << 26 | 0x1 << 25 | 0x1 << 24 | 0x1 << 21 | 0x1 << 20 | 0x1 << 18 | 0x1 << 17 | 0x1 << 11 | 0x1 << 9 | 0x1 << 8 | 0x1 << 7 | 0x7 << 4 | 0x1 << 1 | 0);
- writel(0x6e << 20 | 0x20 << 14 | 0x17 << 8 | 0x9 << 3 | 0,
- &phy->ss_phy_param1);
+ write32(&phy->ss_phy_param1,
+ 0x6e << 20 | 0x20 << 14 | 0x17 << 8 | 0x9 << 3 | 0);
- writel(0x1 << 2, &phy->general_cfg); /* set XHCI 1.00 compliance */
+ write32(&phy->general_cfg, 0x1 << 2); /* set XHCI 1.00 compliance */
udelay(5);
clrbits_le32(&phy->ss_phy_ctrl, 0x1 << 7); /* deassert SS PHY reset */
@@ -141,9 +141,9 @@ static void crport_handshake(void *capture_reg, void *acknowledge_bit, u32 data)
int usec = 100;
if (capture_reg)
- writel(data, capture_reg);
+ write32(capture_reg, data);
- writel(0x1 << 0, acknowledge_bit);
+ write32(acknowledge_bit, 0x1 << 0);
while (read32(acknowledge_bit) && --usec)
udelay(1);
diff --git a/src/soc/rockchip/rk3288/clock.c b/src/soc/rockchip/rk3288/clock.c
index d7420ea8d6..a9c888d631 100644
--- a/src/soc/rockchip/rk3288/clock.c
+++ b/src/soc/rockchip/rk3288/clock.c
@@ -217,19 +217,20 @@ static int rkclk_set_pll(u32 *pll_con, const struct pll_div *div)
(div->no == 1 || !(div->no % 2)));
/* enter rest */
- writel(RK_SETBITS(PLL_RESET_MSK), &pll_con[3]);
+ write32(&pll_con[3], RK_SETBITS(PLL_RESET_MSK));
- writel(RK_CLRSETBITS(PLL_NR_MSK, (div->nr - 1) << PLL_NR_SHIFT)
- | RK_CLRSETBITS(PLL_OD_MSK, (div->no - 1)), &pll_con[0]);
+ write32(&pll_con[0],
+ RK_CLRSETBITS(PLL_NR_MSK, (div->nr - 1) << PLL_NR_SHIFT) | RK_CLRSETBITS(PLL_OD_MSK, (div->no - 1)));
- writel(RK_CLRSETBITS(PLL_NF_MSK, (div->nf - 1)), &pll_con[1]);
+ write32(&pll_con[1], RK_CLRSETBITS(PLL_NF_MSK, (div->nf - 1)));
- writel(RK_CLRSETBITS(PLL_BWADJ_MSK, ((div->nf >> 1) - 1)), &pll_con[2]);
+ write32(&pll_con[2],
+ RK_CLRSETBITS(PLL_BWADJ_MSK, ((div->nf >> 1) - 1)));
udelay(10);
/* return form rest */
- writel(RK_CLRBITS(PLL_RESET_MSK), &pll_con[3]);
+ write32(&pll_con[3], RK_CLRBITS(PLL_RESET_MSK));
return 0;
}
@@ -257,9 +258,8 @@ void rkclk_init(void)
u32 pclk_div;
/* pll enter slow-mode */
- writel(RK_CLRSETBITS(GPLL_MODE_MSK, GPLL_MODE_SLOW)
- | RK_CLRSETBITS(CPLL_MODE_MSK, CPLL_MODE_SLOW),
- &cru_ptr->cru_mode_con);
+ write32(&cru_ptr->cru_mode_con,
+ RK_CLRSETBITS(GPLL_MODE_MSK, GPLL_MODE_SLOW) | RK_CLRSETBITS(CPLL_MODE_MSK, CPLL_MODE_SLOW));
/* init pll */
rkclk_set_pll(&cru_ptr->cru_gpll_con[0], &gpll_init_cfg);
@@ -267,7 +267,7 @@ void rkclk_init(void)
/* waiting for pll lock */
while (1) {
- if ((readl(&rk3288_grf->soc_status[1])
+ if ((read32(&rk3288_grf->soc_status[1])
& (SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK))
== (SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK))
break;
@@ -288,15 +288,8 @@ void rkclk_init(void)
assert((pclk_div + 1) * PD_BUS_PCLK_HZ ==
PD_BUS_ACLK_HZ && pclk_div < 0x7);
- writel(RK_SETBITS(PD_BUS_SEL_GPLL)
- | RK_CLRSETBITS(PD_BUS_PCLK_DIV_MSK,
- pclk_div << PD_BUS_PCLK_DIV_SHIFT)
- | RK_CLRSETBITS(PD_BUS_HCLK_DIV_MSK,
- hclk_div << PD_BUS_HCLK_DIV_SHIFT)
- | RK_CLRSETBITS(PD_BUS_ACLK_DIV0_MASK,
- aclk_div << PD_BUS_ACLK_DIV0_SHIFT)
- | RK_CLRSETBITS(PD_BUS_ACLK_DIV1_MASK, 0 << 0),
- &cru_ptr->cru_clksel_con[1]);
+ write32(&cru_ptr->cru_clksel_con[1],
+ RK_SETBITS(PD_BUS_SEL_GPLL) | RK_CLRSETBITS(PD_BUS_PCLK_DIV_MSK, pclk_div << PD_BUS_PCLK_DIV_SHIFT) | RK_CLRSETBITS(PD_BUS_HCLK_DIV_MSK, hclk_div << PD_BUS_HCLK_DIV_SHIFT) | RK_CLRSETBITS(PD_BUS_ACLK_DIV0_MASK, aclk_div << PD_BUS_ACLK_DIV0_SHIFT) | RK_CLRSETBITS(PD_BUS_ACLK_DIV1_MASK, 0 << 0));
/*
* peri clock pll source selection and
@@ -313,33 +306,26 @@ void rkclk_init(void)
assert((1 << pclk_div) * PERI_PCLK_HZ ==
PERI_ACLK_HZ && (pclk_div < 0x4));
- writel(RK_SETBITS(PERI_SEL_GPLL)
- | RK_CLRSETBITS(PERI_PCLK_DIV_MSK,
- pclk_div << PERI_PCLK_DIV_SHIFT)
- | RK_CLRSETBITS(PERI_HCLK_DIV_MSK,
- hclk_div << PERI_HCLK_DIV_SHIFT)
- | RK_CLRSETBITS(PERI_ACLK_DIV_MSK,
- aclk_div << PERI_ACLK_DIV_SHIFT),
- &cru_ptr->cru_clksel_con[10]);
+ write32(&cru_ptr->cru_clksel_con[10],
+ RK_SETBITS(PERI_SEL_GPLL) | RK_CLRSETBITS(PERI_PCLK_DIV_MSK, pclk_div << PERI_PCLK_DIV_SHIFT) | RK_CLRSETBITS(PERI_HCLK_DIV_MSK, hclk_div << PERI_HCLK_DIV_SHIFT) | RK_CLRSETBITS(PERI_ACLK_DIV_MSK, aclk_div << PERI_ACLK_DIV_SHIFT));
/* PLL enter normal-mode */
- writel(RK_CLRSETBITS(GPLL_MODE_MSK, GPLL_MODE_NORM)
- | RK_CLRSETBITS(CPLL_MODE_MSK, CPLL_MODE_NORM),
- &cru_ptr->cru_mode_con);
+ write32(&cru_ptr->cru_mode_con,
+ RK_CLRSETBITS(GPLL_MODE_MSK, GPLL_MODE_NORM) | RK_CLRSETBITS(CPLL_MODE_MSK, CPLL_MODE_NORM));
}
void rkclk_configure_cpu(void)
{
/* pll enter slow-mode */
- writel(RK_CLRSETBITS(APLL_MODE_MSK, APLL_MODE_SLOW),
- &cru_ptr->cru_mode_con);
+ write32(&cru_ptr->cru_mode_con,
+ RK_CLRSETBITS(APLL_MODE_MSK, APLL_MODE_SLOW));
rkclk_set_pll(&cru_ptr->cru_apll_con[0], &apll_init_cfg);
/* waiting for pll lock */
while (1) {
- if (readl(&rk3288_grf->soc_status[1]) & SOCSTS_APLL_LOCK)
+ if (read32(&rk3288_grf->soc_status[1]) & SOCSTS_APLL_LOCK)
break;
udelay(1);
}
@@ -350,24 +336,19 @@ void rkclk_configure_cpu(void)
* core clock select apll, apll clk = 1800MHz
* arm clk = 1800MHz, mpclk = 450MHz, m0clk = 900MHz
*/
- writel(RK_CLRBITS(CORE_SEL_PLL_MSK)
- | RK_CLRSETBITS(A12_DIV_MSK, 0 << A12_DIV_SHIFT)
- | RK_CLRSETBITS(MP_DIV_MSK, 3 << MP_DIV_SHIFT)
- | RK_CLRSETBITS(M0_DIV_MSK, 1 << 0),
- &cru_ptr->cru_clksel_con[0]);
+ write32(&cru_ptr->cru_clksel_con[0],
+ RK_CLRBITS(CORE_SEL_PLL_MSK) | RK_CLRSETBITS(A12_DIV_MSK, 0 << A12_DIV_SHIFT) | RK_CLRSETBITS(MP_DIV_MSK, 3 << MP_DIV_SHIFT) | RK_CLRSETBITS(M0_DIV_MSK, 1 << 0));
/*
* set up dependent divisors for L2RAM/ATCLK and PCLK clocks.
* l2ramclk = 900MHz, atclk = 450MHz, pclk_dbg = 450MHz
*/
- writel(RK_CLRSETBITS(L2_DIV_MSK, 1 << 0)
- | RK_CLRSETBITS(ATCLK_DIV_MSK, (3 << ATCLK_DIV_SHIFT))
- | RK_CLRSETBITS(PCLK_DBG_DIV_MSK, (3 << PCLK_DBG_DIV_SHIFT)),
- &cru_ptr->cru_clksel_con[37]);
+ write32(&cru_ptr->cru_clksel_con[37],
+ RK_CLRSETBITS(L2_DIV_MSK, 1 << 0) | RK_CLRSETBITS(ATCLK_DIV_MSK, (3 << ATCLK_DIV_SHIFT)) | RK_CLRSETBITS(PCLK_DBG_DIV_MSK, (3 << PCLK_DBG_DIV_SHIFT)));
/* PLL enter normal-mode */
- writel(RK_CLRSETBITS(APLL_MODE_MSK, APLL_MODE_NORM),
- &cru_ptr->cru_mode_con);
+ write32(&cru_ptr->cru_mode_con,
+ RK_CLRSETBITS(APLL_MODE_MSK, APLL_MODE_NORM));
}
void rkclk_configure_ddr(unsigned int hz)
@@ -392,21 +373,21 @@ void rkclk_configure_ddr(unsigned int hz)
}
/* pll enter slow-mode */
- writel(RK_CLRSETBITS(DPLL_MODE_MSK, DPLL_MODE_SLOW),
- &cru_ptr->cru_mode_con);
+ write32(&cru_ptr->cru_mode_con,
+ RK_CLRSETBITS(DPLL_MODE_MSK, DPLL_MODE_SLOW));
rkclk_set_pll(&cru_ptr->cru_dpll_con[0], &dpll_cfg);
/* waiting for pll lock */
while (1) {
- if (readl(&rk3288_grf->soc_status[1]) & SOCSTS_DPLL_LOCK)
+ if (read32(&rk3288_grf->soc_status[1]) & SOCSTS_DPLL_LOCK)
break;
udelay(1);
}
/* PLL enter normal-mode */
- writel(RK_CLRSETBITS(DPLL_MODE_MSK, DPLL_MODE_NORM),
- &cru_ptr->cru_mode_con);
+ write32(&cru_ptr->cru_mode_con,
+ RK_CLRSETBITS(DPLL_MODE_MSK, DPLL_MODE_NORM));
}
void rkclk_ddr_reset(u32 ch, u32 ctl, u32 phy)
@@ -417,22 +398,16 @@ void rkclk_ddr_reset(u32 ch, u32 ctl, u32 phy)
u32 phy_psrstn_shift = 1 + 5 * ch;
u32 phy_srstn_shift = 5 * ch;
- writel(RK_CLRSETBITS(1 << phy_ctl_srstn_shift,
- phy << phy_ctl_srstn_shift)
- | RK_CLRSETBITS(1 << ctl_psrstn_shift, ctl << ctl_psrstn_shift)
- | RK_CLRSETBITS(1 << ctl_srstn_shift, ctl << ctl_srstn_shift)
- | RK_CLRSETBITS(1 << phy_psrstn_shift, phy << phy_psrstn_shift)
- | RK_CLRSETBITS(1 << phy_srstn_shift, phy << phy_srstn_shift),
- &cru_ptr->cru_softrst_con[10]);
+ write32(&cru_ptr->cru_softrst_con[10],
+ RK_CLRSETBITS(1 << phy_ctl_srstn_shift, phy << phy_ctl_srstn_shift) | RK_CLRSETBITS(1 << ctl_psrstn_shift, ctl << ctl_psrstn_shift) | RK_CLRSETBITS(1 << ctl_srstn_shift, ctl << ctl_srstn_shift) | RK_CLRSETBITS(1 << phy_psrstn_shift, phy << phy_psrstn_shift) | RK_CLRSETBITS(1 << phy_srstn_shift, phy << phy_srstn_shift));
}
void rkclk_ddr_phy_ctl_reset(u32 ch, u32 n)
{
u32 phy_ctl_srstn_shift = 4 + 5 * ch;
- writel(RK_CLRSETBITS(1 << phy_ctl_srstn_shift,
- n << phy_ctl_srstn_shift),
- &cru_ptr->cru_softrst_con[10]);
+ write32(&cru_ptr->cru_softrst_con[10],
+ RK_CLRSETBITS(1 << phy_ctl_srstn_shift, n << phy_ctl_srstn_shift));
}
void rkclk_configure_spi(unsigned int bus, unsigned int hz)
@@ -443,19 +418,16 @@ void rkclk_configure_spi(unsigned int bus, unsigned int hz)
switch (bus) { /*select gpll as spi src clk, and set div*/
case 0:
- writel(RK_CLRSETBITS(1 << 7 | 0x1f << 0, 1 << 7
- | (src_clk_div - 1) << 0),
- &cru_ptr->cru_clksel_con[25]);
+ write32(&cru_ptr->cru_clksel_con[25],
+ RK_CLRSETBITS(1 << 7 | 0x1f << 0, 1 << 7 | (src_clk_div - 1) << 0));
break;
case 1:
- writel(RK_CLRSETBITS(1 << 15 | 0x1f << 8, 1 << 15
- | (src_clk_div - 1) << 8),
- &cru_ptr->cru_clksel_con[25]);
+ write32(&cru_ptr->cru_clksel_con[25],
+ RK_CLRSETBITS(1 << 15 | 0x1f << 8, 1 << 15 | (src_clk_div - 1) << 8));
break;
case 2:
- writel(RK_CLRSETBITS(1 << 7 | 0x1f << 0, 1 << 7
- | (src_clk_div - 1) << 0),
- &cru_ptr->cru_clksel_con[39]);
+ write32(&cru_ptr->cru_clksel_con[39],
+ RK_CLRSETBITS(1 << 7 | 0x1f << 0, 1 << 7 | (src_clk_div - 1) << 0));
break;
default:
printk(BIOS_ERR, "do not support this spi bus\n");
@@ -481,16 +453,15 @@ void rkclk_configure_i2s(unsigned int hz)
i2s0_outclk_sel: clk_i2s
i2s0_clk_sel: divider ouput from fraction
i2s0_pll_div_con: 0*/
- writel(RK_CLRSETBITS(1 << 15 | 1 << 12 | 3 << 8 | 0x7f << 0 ,
- 1 << 15 | 0 << 12 | 1 << 8 | 0 << 0),
- &cru_ptr->cru_clksel_con[4]);
+ write32(&cru_ptr->cru_clksel_con[4],
+ RK_CLRSETBITS(1 << 15 | 1 << 12 | 3 << 8 | 0x7f << 0, 1 << 15 | 0 << 12 | 1 << 8 | 0 << 0));
/* set frac divider */
v = clk_gcd(GPLL_HZ, hz);
n = (GPLL_HZ / v) & (0xffff);
d = (hz / v) & (0xffff);
assert(hz == GPLL_HZ / n * d);
- writel(d << 16 | n, &cru_ptr->cru_clksel_con[8]);
+ write32(&cru_ptr->cru_clksel_con[8], d << 16 | n);
}
void rkclk_configure_crypto(unsigned int hz)
@@ -499,8 +470,8 @@ void rkclk_configure_crypto(unsigned int hz)
assert((div - 1 < 4) && (div * hz == PD_BUS_ACLK_HZ));
assert(hz <= 150*MHz); /* Suggested max in TRM. */
- writel(RK_CLRSETBITS(0x3 << 6, (div - 1) << 6),
- &cru_ptr->cru_clksel_con[26]);
+ write32(&cru_ptr->cru_clksel_con[26],
+ RK_CLRSETBITS(0x3 << 6, (div - 1) << 6));
}
void rkclk_configure_tsadc(unsigned int hz)
@@ -510,8 +481,8 @@ void rkclk_configure_tsadc(unsigned int hz)
div = src_clk / hz;
assert((div - 1 < 64) && (div * hz == 32 * KHz));
- writel(RK_CLRSETBITS(0x3f << 0, (div - 1) << 0),
- &cru_ptr->cru_clksel_con[2]);
+ write32(&cru_ptr->cru_clksel_con[2],
+ RK_CLRSETBITS(0x3f << 0, (div - 1) << 0));
}
static int pll_para_config(u32 freq_hz, struct pll_div *div)
@@ -579,12 +550,12 @@ static int pll_para_config(u32 freq_hz, struct pll_div *div)
void rkclk_configure_edp(void)
{
/* clk_edp_24M source: 24M */
- writel(RK_SETBITS(1 << 15), &cru_ptr->cru_clksel_con[28]);
+ write32(&cru_ptr->cru_clksel_con[28], RK_SETBITS(1 << 15));
/* rst edp */
- writel(RK_SETBITS(1 << 15), &cru_ptr->cru_softrst_con[6]);
+ write32(&cru_ptr->cru_softrst_con[6], RK_SETBITS(1 << 15));
udelay(1);
- writel(RK_CLRBITS(1 << 15), &cru_ptr->cru_softrst_con[6]);
+ write32(&cru_ptr->cru_softrst_con[6], RK_CLRBITS(1 << 15));
}
void rkclk_configure_vop_aclk(u32 vop_id, u32 aclk_hz)
@@ -597,15 +568,13 @@ void rkclk_configure_vop_aclk(u32 vop_id, u32 aclk_hz)
switch (vop_id) {
case 0:
- writel(RK_CLRSETBITS(3 << 6 | 0x1f << 0,
- 0 << 6 | (div - 1) << 0),
- &cru_ptr->cru_clksel_con[31]);
+ write32(&cru_ptr->cru_clksel_con[31],
+ RK_CLRSETBITS(3 << 6 | 0x1f << 0, 0 << 6 | (div - 1) << 0));
break;
case 1:
- writel(RK_CLRSETBITS(3 << 14 | 0x1f << 8,
- 0 << 14 | (div - 1) << 8),
- &cru_ptr->cru_clksel_con[31]);
+ write32(&cru_ptr->cru_clksel_con[31],
+ RK_CLRSETBITS(3 << 14 | 0x1f << 8, 0 << 14 | (div - 1) << 8));
break;
}
}
@@ -618,34 +587,32 @@ int rkclk_configure_vop_dclk(u32 vop_id, u32 dclk_hz)
return -1;
/* npll enter slow-mode */
- writel(RK_CLRSETBITS(NPLL_MODE_MSK, NPLL_MODE_SLOW),
- &cru_ptr->cru_mode_con);
+ write32(&cru_ptr->cru_mode_con,
+ RK_CLRSETBITS(NPLL_MODE_MSK, NPLL_MODE_SLOW));
rkclk_set_pll(&cru_ptr->cru_npll_con[0], &npll_config);
/* waiting for pll lock */
while (1) {
- if (readl(&rk3288_grf->soc_status[1]) & SOCSTS_NPLL_LOCK)
+ if (read32(&rk3288_grf->soc_status[1]) & SOCSTS_NPLL_LOCK)
break;
udelay(1);
}
/* npll enter normal-mode */
- writel(RK_CLRSETBITS(NPLL_MODE_MSK, NPLL_MODE_NORM),
- &cru_ptr->cru_mode_con);
+ write32(&cru_ptr->cru_mode_con,
+ RK_CLRSETBITS(NPLL_MODE_MSK, NPLL_MODE_NORM));
/* vop dclk source clk: npll,dclk_div: 1 */
switch (vop_id) {
case 0:
- writel(RK_CLRSETBITS(0xff << 8 | 3 << 0,
- 0 << 8 | 2 << 0),
- &cru_ptr->cru_clksel_con[27]);
+ write32(&cru_ptr->cru_clksel_con[27],
+ RK_CLRSETBITS(0xff << 8 | 3 << 0, 0 << 8 | 2 << 0));
break;
case 1:
- writel(RK_CLRSETBITS(0xff << 8 | 3 << 6,
- 0 << 8 | 2 << 6),
- &cru_ptr->cru_clksel_con[29]);
+ write32(&cru_ptr->cru_clksel_con[29],
+ RK_CLRSETBITS(0xff << 8 | 3 << 6, 0 << 8 | 2 << 6));
break;
}
return 0;
@@ -654,5 +621,5 @@ int rkclk_configure_vop_dclk(u32 vop_id, u32 dclk_hz)
int rkclk_was_watchdog_reset(void)
{
/* Bits 5 and 4 are "second" and "first" global watchdog reset. */
- return readl(&cru_ptr->cru_glb_rst_st) & 0x30;
+ return read32(&cru_ptr->cru_glb_rst_st) & 0x30;
}
diff --git a/src/soc/rockchip/rk3288/crypto.c b/src/soc/rockchip/rk3288/crypto.c
index 20fd60a474..e57d1560e7 100644
--- a/src/soc/rockchip/rk3288/crypto.c
+++ b/src/soc/rockchip/rk3288/crypto.c
@@ -80,17 +80,17 @@ int vb2ex_hwcrypto_digest_init(enum vb2_hash_algorithm hash_alg,
return VB2_ERROR_EX_HWCRYPTO_UNSUPPORTED;
}
- writel(RK_SETBITS(1 << 6), &crypto->ctrl); /* Assert HASH_FLUSH */
+ write32(&crypto->ctrl, RK_SETBITS(1 << 6)); /* Assert HASH_FLUSH */
udelay(1); /* for 10+ cycles to */
- writel(RK_CLRBITS(1 << 6), &crypto->ctrl); /* clear out old hash */
+ write32(&crypto->ctrl, RK_CLRBITS(1 << 6)); /* clear out old hash */
/* Enable DMA byte swapping for little-endian bus (Byteswap_??FIFO) */
- writel(1 << 5 | 1 << 4 | 1 << 3, &crypto->conf);
+ write32(&crypto->conf, 1 << 5 | 1 << 4 | 1 << 3);
- writel(HRDMA_ERR | HRDMA_DONE, &crypto->intena); /* enable interrupt */
+ write32(&crypto->intena, HRDMA_ERR | HRDMA_DONE); /* enable interrupt */
- writel(data_size, &crypto->hash_msg_len); /* program total size */
- writel(1 << 3 | 0x2, &crypto->hash_ctrl); /* swap DOUT, SHA256 */
+ write32(&crypto->hash_msg_len, data_size); /* program total size */
+ write32(&crypto->hash_ctrl, 1 << 3 | 0x2); /* swap DOUT, SHA256 */
printk(BIOS_DEBUG, "Initialized RK3288 HW crypto for %u byte SHA256\n",
data_size);
@@ -101,12 +101,12 @@ int vb2ex_hwcrypto_digest_extend(const uint8_t *buf, uint32_t size)
{
uint32_t intsts;
- writel(HRDMA_ERR | HRDMA_DONE, &crypto->intsts); /* clear interrupts */
+ write32(&crypto->intsts, HRDMA_ERR | HRDMA_DONE); /* clear interrupts */
/* NOTE: This assumes that the DMA is reading from uncached SRAM. */
- writel((uint32_t)buf, &crypto->hrdmas);
- writel(size / sizeof(uint32_t), &crypto->hrdmal);
- writel(RK_SETBITS(1 << 3), &crypto->ctrl); /* Set HASH_START */
+ write32(&crypto->hrdmas, (uint32_t)buf);
+ write32(&crypto->hrdmal, size / sizeof(uint32_t));
+ write32(&crypto->ctrl, RK_SETBITS(1 << 3)); /* Set HASH_START */
do {
intsts = read32(&crypto->intsts);
if (intsts & HRDMA_ERR) {
diff --git a/src/soc/rockchip/rk3288/edp.c b/src/soc/rockchip/rk3288/edp.c
index 3f27195199..38e972d7cd 100644
--- a/src/soc/rockchip/rk3288/edp.c
+++ b/src/soc/rockchip/rk3288/edp.c
@@ -53,66 +53,52 @@ static const char *pre_emph_names[] = {
static void rk_edp_init_refclk(struct rk_edp *edp)
{
- writel(SEL_24M, &edp->regs->analog_ctl_2);
- writel(REF_CLK_24M, &edp->regs->pll_reg_1);
+ write32(&edp->regs->analog_ctl_2, SEL_24M);
+ write32(&edp->regs->pll_reg_1, REF_CLK_24M);
/*initial value*/
- writel(LDO_OUTPUT_V_SEL_145 |
- KVCO_DEFALUT |
- CHG_PUMP_CUR_SEL_5US |
- V2L_CUR_SEL_1MA, &edp->regs->pll_reg_2);
-
- writel(LOCK_DET_CNT_SEL_256 |
- LOOP_FILTER_RESET |
- PALL_SSC_RESET |
- LOCK_DET_BYPASS |
- PLL_LOCK_DET_MODE |
- PLL_LOCK_DET_FORCE, &edp->regs->pll_reg_3);
-
- writel(REGULATOR_V_SEL_950MV |
- STANDBY_CUR_SEL |
- CHG_PUMP_INOUT_CTRL_1200MV |
- CHG_PUMP_INPUT_CTRL_OP, &edp->regs->pll_reg_5);
-
- writel(SSC_OFFSET | SSC_MODE | SSC_DEPTH, &edp->regs->ssc_reg);
-
- writel(TX_SWING_PRE_EMP_MODE |
- PRE_DRIVER_PW_CTRL1 |
- LP_MODE_CLK_REGULATOR |
- RESISTOR_MSB_CTRL |
- RESISTOR_CTRL, &edp->regs->tx_common);
-
- writel(DP_AUX_COMMON_MODE |
- DP_AUX_EN |
- AUX_TERM_50OHM, &edp->regs->dp_aux);
-
- writel(DP_BG_OUT_SEL |
- DP_DB_CUR_CTRL |
- DP_BG_SEL |
- DP_RESISTOR_TUNE_BG, &edp->regs->dp_bias);
-
- writel(CH1_CH3_SWING_EMP_CTRL |
- CH0_CH2_SWING_EMP_CTRL, &edp->regs->dp_reserv2);
+ write32(&edp->regs->pll_reg_2,
+ LDO_OUTPUT_V_SEL_145 | KVCO_DEFALUT | CHG_PUMP_CUR_SEL_5US | V2L_CUR_SEL_1MA);
+
+ write32(&edp->regs->pll_reg_3,
+ LOCK_DET_CNT_SEL_256 | LOOP_FILTER_RESET | PALL_SSC_RESET | LOCK_DET_BYPASS | PLL_LOCK_DET_MODE | PLL_LOCK_DET_FORCE);
+
+ write32(&edp->regs->pll_reg_5,
+ REGULATOR_V_SEL_950MV | STANDBY_CUR_SEL | CHG_PUMP_INOUT_CTRL_1200MV | CHG_PUMP_INPUT_CTRL_OP);
+
+ write32(&edp->regs->ssc_reg, SSC_OFFSET | SSC_MODE | SSC_DEPTH);
+
+ write32(&edp->regs->tx_common,
+ TX_SWING_PRE_EMP_MODE | PRE_DRIVER_PW_CTRL1 | LP_MODE_CLK_REGULATOR | RESISTOR_MSB_CTRL | RESISTOR_CTRL);
+
+ write32(&edp->regs->dp_aux,
+ DP_AUX_COMMON_MODE | DP_AUX_EN | AUX_TERM_50OHM);
+
+ write32(&edp->regs->dp_bias,
+ DP_BG_OUT_SEL | DP_DB_CUR_CTRL | DP_BG_SEL | DP_RESISTOR_TUNE_BG);
+
+ write32(&edp->regs->dp_reserv2,
+ CH1_CH3_SWING_EMP_CTRL | CH0_CH2_SWING_EMP_CTRL);
}
static void rk_edp_init_interrupt(struct rk_edp *edp)
{
/* Set interrupt pin assertion polarity as high */
- writel(INT_POL, &edp->regs->int_ctl);
+ write32(&edp->regs->int_ctl, INT_POL);
/* Clear pending registers */
- writel(0xff, &edp->regs->common_int_sta_1);
- writel(0x4f, &edp->regs->common_int_sta_2);
- writel(0xff, &edp->regs->common_int_sta_3);
- writel(0x27, &edp->regs->common_int_sta_4);
- writel(0x7f, &edp->regs->dp_int_sta);
+ write32(&edp->regs->common_int_sta_1, 0xff);
+ write32(&edp->regs->common_int_sta_2, 0x4f);
+ write32(&edp->regs->common_int_sta_3, 0xff);
+ write32(&edp->regs->common_int_sta_4, 0x27);
+ write32(&edp->regs->dp_int_sta, 0x7f);
/* 0:mask,1: unmask */
- writel(0x00, &edp->regs->common_int_mask_1);
- writel(0x00, &edp->regs->common_int_mask_2);
- writel(0x00, &edp->regs->common_int_mask_3);
- writel(0x00, &edp->regs->common_int_mask_4);
- writel(0x00, &edp->regs->int_sta_mask);
+ write32(&edp->regs->common_int_mask_1, 0x00);
+ write32(&edp->regs->common_int_mask_2, 0x00);
+ write32(&edp->regs->common_int_mask_3, 0x00);
+ write32(&edp->regs->common_int_mask_4, 0x00);
+ write32(&edp->regs->int_sta_mask, 0x00);
}
static void rk_edp_enable_sw_function(struct rk_edp *edp)
@@ -124,7 +110,7 @@ static int rk_edp_get_pll_lock_status(struct rk_edp *edp)
{
u32 val;
- val = readl(&edp->regs->dp_debug_ctl);
+ val = read32(&edp->regs->dp_debug_ctl);
return (val & PLL_LOCK) ? DP_PLL_LOCKED : DP_PLL_UNLOCKED;
}
@@ -132,9 +118,9 @@ static void rk_edp_init_analog_func(struct rk_edp *edp)
{
struct stopwatch sw;
- writel(0x00, &edp->regs->dp_pd);
+ write32(&edp->regs->dp_pd, 0x00);
- writel(PLL_LOCK_CHG, &edp->regs->common_int_sta_1);
+ write32(&edp->regs->common_int_sta_1, PLL_LOCK_CHG);
clrbits_le32(&edp->regs->dp_debug_ctl, F_PLL_LOCK | PLL_LOCK_CTRL);
@@ -156,13 +142,13 @@ static void rk_edp_init_analog_func(struct rk_edp *edp)
static void rk_edp_init_aux(struct rk_edp *edp)
{
/* Clear inerrupts related to AUX channel */
- writel(AUX_FUNC_EN_N, &edp->regs->dp_int_sta);
+ write32(&edp->regs->dp_int_sta, AUX_FUNC_EN_N);
/* Disable AUX channel module */
setbits_le32(&edp->regs->func_en_2, AUX_FUNC_EN_N);
/* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
- writel(DEFER_CTRL_EN | DEFER_COUNT(1), &edp->regs->aux_ch_defer_dtl);
+ write32(&edp->regs->aux_ch_defer_dtl, DEFER_CTRL_EN | DEFER_COUNT(1));
/* Enable AUX channel module */
clrbits_le32(&edp->regs->func_en_2, AUX_FUNC_EN_N);
@@ -175,7 +161,7 @@ static int rk_edp_aux_enable(struct rk_edp *edp)
setbits_le32(&edp->regs->aux_ch_ctl_2, AUX_EN);
stopwatch_init_msecs_expire(&sw, 20);
do {
- if (!(readl(&edp->regs->aux_ch_ctl_2) & AUX_EN))
+ if (!(read32(&edp->regs->aux_ch_ctl_2) & AUX_EN))
return 0;
} while (!stopwatch_expired(&sw));
@@ -189,12 +175,12 @@ static int rk_edp_is_aux_reply(struct rk_edp *edp)
stopwatch_init_msecs_expire(&sw, 10);
- while (!(readl(&edp->regs->dp_int_sta) & RPLY_RECEIV)) {
+ while (!(read32(&edp->regs->dp_int_sta) & RPLY_RECEIV)) {
if (stopwatch_expired(&sw))
return -1;
}
- writel(RPLY_RECEIV, &edp->regs->dp_int_sta);
+ write32(&edp->regs->dp_int_sta, RPLY_RECEIV);
return 0;
}
@@ -216,14 +202,14 @@ static int rk_edp_start_aux_transaction(struct rk_edp *edp)
}
/* Clear interrupt source for AUX CH access error */
- val = readl(&edp->regs->dp_int_sta);
+ val = read32(&edp->regs->dp_int_sta);
if (val & AUX_ERR) {
- writel(AUX_ERR, &edp->regs->dp_int_sta);
+ write32(&edp->regs->dp_int_sta, AUX_ERR);
return -1;
}
/* Check AUX CH error access status */
- val = readl(&edp->regs->dp_int_sta);
+ val = read32(&edp->regs->dp_int_sta);
if ((val & AUX_STATUS_MASK) != 0) {
edp_debug("AUX CH error happens: %d\n\n",
val & AUX_STATUS_MASK);
@@ -249,15 +235,15 @@ static int rk_edp_dpcd_transfer(struct rk_edp *edp,
/* Clear AUX CH data buffer */
val = BUF_CLR;
- writel(val, &edp->regs->buf_data_ctl);
+ write32(&edp->regs->buf_data_ctl, val);
/* Select DPCD device address */
val = AUX_ADDR_7_0(val_addr);
- writel(val, &edp->regs->aux_addr_7_0);
+ write32(&edp->regs->aux_addr_7_0, val);
val = AUX_ADDR_15_8(val_addr);
- writel(val, &edp->regs->aux_addr_15_8);
+ write32(&edp->regs->aux_addr_15_8, val);
val = AUX_ADDR_19_16(val_addr);
- writel(val, &edp->regs->aux_addr_19_16);
+ write32(&edp->regs->aux_addr_19_16, val);
/*
* Set DisplayPort transaction and read 1 byte
@@ -269,13 +255,14 @@ static int rk_edp_dpcd_transfer(struct rk_edp *edp,
AUX_TX_COMM_DP_TRANSACTION |
AUX_TX_COMM_WRITE;
for (i = 0; i < len; i++)
- writel(*data++, &edp->regs->buf_data[i]);
+ write32(&edp->regs->buf_data[i],
+ *data++);
} else
val = AUX_LENGTH(len) |
AUX_TX_COMM_DP_TRANSACTION |
AUX_TX_COMM_READ;
- writel(val, &edp->regs->aux_ch_ctl_1);
+ write32(&edp->regs->aux_ch_ctl_1, val);
/* Start AUX transaction */
retval = rk_edp_start_aux_transaction(edp);
@@ -291,7 +278,7 @@ static int rk_edp_dpcd_transfer(struct rk_edp *edp,
if (request == DPCD_READ) {
for (i = 0; i < len; i++)
- *data++ = (u8)readl(&edp->regs->buf_data[i]);
+ *data++ = (u8)read32(&edp->regs->buf_data[i]);
}
length -= len;
@@ -357,7 +344,7 @@ static void rk_edp_set_link_training(struct rk_edp *edp,
int i;
for (i = 0; i < edp->link_train.lane_count; i++)
- writel(training_values[i], &edp->regs->ln_link_trn_ctl[i]);
+ write32(&edp->regs->ln_link_trn_ctl[i], training_values[i]);
}
static u8 edp_link_status(const u8 *link_status, int r)
@@ -484,7 +471,7 @@ static int rk_edp_link_train_cr(struct rk_edp *edp)
u8 value;
value = DP_TRAINING_PATTERN_1;
- writel(value, &edp->regs->dp_training_ptn_set);
+ write32(&edp->regs->dp_training_ptn_set, value);
rk_edp_dpcd_write(edp, DPCD_TRAINING_PATTERN_SET, &value, 1);
memset(edp->train_set, 0, 4);
@@ -557,7 +544,7 @@ static int rk_edp_link_train_ce(struct rk_edp *edp)
u8 status[DP_LINK_STATUS_SIZE];
value = DP_TRAINING_PATTERN_2;
- writel(value, &edp->regs->dp_training_ptn_set);
+ write32(&edp->regs->dp_training_ptn_set, value);
rk_edp_dpcd_write(edp, DPCD_TRAINING_PATTERN_SET, &value, 1);
/* channel equalization loop */
@@ -635,18 +622,18 @@ static int rk_edp_hw_link_training(struct rk_edp *edp)
struct stopwatch sw;
/* Set link rate and count as you want to establish*/
- writel(edp->link_train.link_rate, &edp->regs->link_bw_set);
- writel(edp->link_train.lane_count, &edp->regs->lane_count_set);
+ write32(&edp->regs->link_bw_set, edp->link_train.link_rate);
+ write32(&edp->regs->lane_count_set, edp->link_train.lane_count);
if (rk_edp_link_train_cr(edp))
return -1;
if (rk_edp_link_train_ce(edp))
return -1;
- writel(HW_LT_EN, &edp->regs->dp_hw_link_training);
+ write32(&edp->regs->dp_hw_link_training, HW_LT_EN);
stopwatch_init_msecs_expire(&sw, 10);
do {
- val = readl(&edp->regs->dp_hw_link_training);
+ val = read32(&edp->regs->dp_hw_link_training);
if (!(val & HW_LT_EN))
break;
} while (!stopwatch_expired(&sw));
@@ -668,12 +655,12 @@ static int rk_edp_select_i2c_device(struct rk_edp *edp,
/* Set EDID device address */
val = device_addr;
- writel(val, &edp->regs->aux_addr_7_0);
- writel(0x0, &edp->regs->aux_addr_15_8);
- writel(0x0, &edp->regs->aux_addr_19_16);
+ write32(&edp->regs->aux_addr_7_0, val);
+ write32(&edp->regs->aux_addr_15_8, 0x0);
+ write32(&edp->regs->aux_addr_19_16, 0x0);
/* Set offset from base address of EDID device */
- writel(val_addr, &edp->regs->buf_data[0]);
+ write32(&edp->regs->buf_data[0], val_addr);
/*
* Set I2C transaction and write address
@@ -682,7 +669,7 @@ static int rk_edp_select_i2c_device(struct rk_edp *edp,
*/
val = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
AUX_TX_COMM_WRITE;
- writel(val, &edp->regs->aux_ch_ctl_1);
+ write32(&edp->regs->aux_ch_ctl_1, val);
/* Start AUX transaction */
retval = rk_edp_start_aux_transaction(edp);
@@ -708,7 +695,7 @@ static int rk_edp_read_bytes_from_i2c(struct rk_edp *edp,
for (j = 0; j < 10; j++) { /* try 10 times */
/* Clear AUX CH data buffer */
val = BUF_CLR;
- writel(val, &edp->regs->buf_data_ctl);
+ write32(&edp->regs->buf_data_ctl, val);
/* Set normal AUX CH command */
clrbits_le32(&edp->regs->aux_ch_ctl_2, ADDR_ONLY);
@@ -730,7 +717,7 @@ static int rk_edp_read_bytes_from_i2c(struct rk_edp *edp,
*/
val = AUX_LENGTH(16) | AUX_TX_COMM_I2C_TRANSACTION |
AUX_TX_COMM_READ;
- writel(val, &edp->regs->aux_ch_ctl_1);
+ write32(&edp->regs->aux_ch_ctl_1, val);
/* Start AUX transaction */
retval = rk_edp_start_aux_transaction(edp);
@@ -742,7 +729,7 @@ static int rk_edp_read_bytes_from_i2c(struct rk_edp *edp,
}
/* Check if Rx sends defer */
- val = readl(&edp->regs->aux_rx_comm);
+ val = read32(&edp->regs->aux_rx_comm);
if (val == AUX_RX_COMM_AUX_DEFER ||
val == AUX_RX_COMM_I2C_DEFER) {
edp_debug("Defer: %d\n\n", val);
@@ -754,7 +741,7 @@ static int rk_edp_read_bytes_from_i2c(struct rk_edp *edp,
return -1;
for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
- val = readl(&edp->regs->buf_data[cur_data_idx]);
+ val = read32(&edp->regs->buf_data[cur_data_idx]);
edid[i + cur_data_idx] = (u8)val;
}
}
@@ -818,13 +805,13 @@ static void rk_edp_init_video(struct rk_edp *edp)
u32 val;
val = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
- writel(val, &edp->regs->common_int_sta_1);
+ write32(&edp->regs->common_int_sta_1, val);
val = CHA_CRI(4) | CHA_CTRL;
- writel(val, &edp->regs->sys_ctl_2);
+ write32(&edp->regs->sys_ctl_2, val);
val = VID_HRES_TH(2) | VID_VRES_TH(0);
- writel(val, &edp->regs->video_ctl_8);
+ write32(&edp->regs->video_ctl_8, val);
}
static void rk_edp_config_video_slave_mode(struct rk_edp *edp)
@@ -843,24 +830,24 @@ static void rk_edp_set_video_cr_mn(struct rk_edp *edp,
if (type == REGISTER_M) {
setbits_le32(&edp->regs->sys_ctl_4, FIX_M_VID);
val = m_value & 0xff;
- writel(val, &edp->regs->m_vid_0);
+ write32(&edp->regs->m_vid_0, val);
val = (m_value >> 8) & 0xff;
- writel(val, &edp->regs->m_vid_1);
+ write32(&edp->regs->m_vid_1, val);
val = (m_value >> 16) & 0xff;
- writel(val, &edp->regs->m_vid_2);
+ write32(&edp->regs->m_vid_2, val);
val = n_value & 0xff;
- writel(val, &edp->regs->n_vid_0);
+ write32(&edp->regs->n_vid_0, val);
val = (n_value >> 8) & 0xff;
- writel(val, &edp->regs->n_vid_1);
+ write32(&edp->regs->n_vid_1, val);
val = (n_value >> 16) & 0xff;
- writel(val, &edp->regs->n_vid_2);
+ write32(&edp->regs->n_vid_2, val);
} else {
clrbits_le32(&edp->regs->sys_ctl_4, FIX_M_VID);
- writel(0x00, &edp->regs->n_vid_0);
- writel(0x80, &edp->regs->n_vid_1);
- writel(0x00, &edp->regs->n_vid_2);
+ write32(&edp->regs->n_vid_0, 0x00);
+ write32(&edp->regs->n_vid_1, 0x80);
+ write32(&edp->regs->n_vid_2, 0x00);
}
}
@@ -871,19 +858,19 @@ static int rk_edp_is_video_stream_clock_on(struct rk_edp *edp)
stopwatch_init_msecs_expire(&sw, 100);
do {
- val = readl(&edp->regs->sys_ctl_1);
+ val = read32(&edp->regs->sys_ctl_1);
/*must write value to update DET_STA bit status*/
- writel(val, &edp->regs->sys_ctl_1);
- val = readl(&edp->regs->sys_ctl_1);
+ write32(&edp->regs->sys_ctl_1, val);
+ val = read32(&edp->regs->sys_ctl_1);
if (!(val & DET_STA))
continue;
- val = readl(&edp->regs->sys_ctl_2);
+ val = read32(&edp->regs->sys_ctl_2);
/*must write value to update CHA_STA bit status*/
- writel(val, &edp->regs->sys_ctl_2);
- val = readl(&edp->regs->sys_ctl_2);
+ write32(&edp->regs->sys_ctl_2, val);
+ val = read32(&edp->regs->sys_ctl_2);
if (!(val & CHA_STA))
return 0;
} while (!stopwatch_expired(&sw));
@@ -898,12 +885,12 @@ static int rk_edp_is_video_stream_on(struct rk_edp *edp)
stopwatch_init_msecs_expire(&sw, 100);
do {
- val = readl(&edp->regs->sys_ctl_3);
+ val = read32(&edp->regs->sys_ctl_3);
/*must write value to update STRM_VALID bit status*/
- writel(val, &edp->regs->sys_ctl_3);
+ write32(&edp->regs->sys_ctl_3, val);
- val = readl(&edp->regs->sys_ctl_3);
+ val = read32(&edp->regs->sys_ctl_3);
if (!(val & STRM_VALID))
return 0;
} while (!stopwatch_expired(&sw));
@@ -942,16 +929,16 @@ static void rockchip_edp_force_hpd(struct rk_edp *edp)
{
u32 val;
- val = readl(&edp->regs->sys_ctl_3);
+ val = read32(&edp->regs->sys_ctl_3);
val |= (F_HPD | HPD_CTRL);
- writel(val, &edp->regs->sys_ctl_3);
+ write32(&edp->regs->sys_ctl_3, val);
}
static int rockchip_edp_get_plug_in_status(struct rk_edp *edp)
{
u32 val;
- val = readl(&edp->regs->sys_ctl_3);
+ val = read32(&edp->regs->sys_ctl_3);
if (val & HPD_STATUS)
return 1;
@@ -1020,11 +1007,11 @@ void rk_edp_init(u32 vop_id)
rk_edp.regs = (struct rk3288_edp_regs *)EDP_BASE;
/* grf_edp_ref_clk_sel: from internal 24MHz or 27MHz clock */
- writel(RK_SETBITS(1 << 4), &rk3288_grf->soc_con12);
+ write32(&rk3288_grf->soc_con12, RK_SETBITS(1 << 4));
/* select epd signal from vop0 or vop1 */
val = (vop_id == 1) ? RK_SETBITS(1 << 5) : RK_CLRBITS(1 << 5);
- writel(val, &rk3288_grf->soc_con6);
+ write32(&rk3288_grf->soc_con6, val);
rockchip_edp_wait_hpd(&rk_edp);
diff --git a/src/soc/rockchip/rk3288/gpio.c b/src/soc/rockchip/rk3288/gpio.c
index b84d6a0821..5fc9c7b185 100644
--- a/src/soc/rockchip/rk3288/gpio.c
+++ b/src/soc/rockchip/rk3288/gpio.c
@@ -52,9 +52,8 @@ static void __gpio_input(gpio_t gpio, u32 pull)
clrsetbits_le32(&rk3288_pmu->gpio0pull[gpio.bank],
3 << (gpio.idx * 2), pull << (gpio.idx * 2));
else
- writel(RK_CLRSETBITS(3 << (gpio.idx * 2),
- pull << (gpio.idx * 2)),
- &rk3288_grf->gpio1_p[(gpio.port - 1)][gpio.bank]);
+ write32(&rk3288_grf->gpio1_p[(gpio.port - 1)][gpio.bank],
+ RK_CLRSETBITS(3 << (gpio.idx * 2), pull << (gpio.idx * 2)));
}
void gpio_input(gpio_t gpio)
@@ -74,7 +73,7 @@ void gpio_input_pullup(gpio_t gpio)
int gpio_get(gpio_t gpio)
{
- return (readl(&gpio_port[gpio.port]->ext_porta) >> gpio.num) & 0x1;
+ return (read32(&gpio_port[gpio.port]->ext_porta) >> gpio.num) & 0x1;
}
void gpio_output(gpio_t gpio, int value)
diff --git a/src/soc/rockchip/rk3288/i2c.c b/src/soc/rockchip/rk3288/i2c.c
index d69bb7cb78..6174aafd3c 100644
--- a/src/soc/rockchip/rk3288/i2c.c
+++ b/src/soc/rockchip/rk3288/i2c.c
@@ -97,10 +97,10 @@ static int i2c_send_start(struct rk3288_i2c_regs *reg_addr)
int timeout = I2C_TIMEOUT_US;
i2c_info("I2c Start::Send Start bit\n");
- writel(I2C_CLEANI, &reg_addr->i2c_ipd);
- writel(I2C_EN | I2C_START, &reg_addr->i2c_con);
+ write32(&reg_addr->i2c_ipd, I2C_CLEANI);
+ write32(&reg_addr->i2c_con, I2C_EN | I2C_START);
while (timeout--) {
- if (readl(&reg_addr->i2c_ipd) & I2C_STARTI)
+ if (read32(&reg_addr->i2c_ipd) & I2C_STARTI)
break;
udelay(1);
}
@@ -119,14 +119,14 @@ static int i2c_send_stop(struct rk3288_i2c_regs *reg_addr)
int timeout = I2C_TIMEOUT_US;
i2c_info("I2c Stop::Send Stop bit\n");
- writel(I2C_CLEANI, &reg_addr->i2c_ipd);
- writel(I2C_EN | I2C_STOP, &reg_addr->i2c_con);
+ write32(&reg_addr->i2c_ipd, I2C_CLEANI);
+ write32(&reg_addr->i2c_con, I2C_EN | I2C_STOP);
while (timeout--) {
- if (readl(&reg_addr->i2c_ipd) & I2C_STOPI)
+ if (read32(&reg_addr->i2c_ipd) & I2C_STOPI)
break;
udelay(1);
}
- writel(0, &reg_addr->i2c_con);
+ write32(&reg_addr->i2c_con, 0);
if (timeout <= 0) {
printk(BIOS_ERR, "I2C Stop::Send Stop Bit Timeout\n");
res = I2C_TIMEOUT;
@@ -147,8 +147,8 @@ static int i2c_read(struct rk3288_i2c_regs *reg_addr, struct i2c_seg segment)
unsigned int con = 0;
unsigned int i, j;
- writel(I2C_8BIT | segment.chip << 1 | 1, &reg_addr->i2c_mrxaddr);
- writel(0, &reg_addr->i2c_mrxraddr);
+ write32(&reg_addr->i2c_mrxaddr, I2C_8BIT | segment.chip << 1 | 1);
+ write32(&reg_addr->i2c_mrxraddr, 0);
con = I2C_MODE_TRX | I2C_EN | I2C_ACT2NAK;
while (bytes_remaining) {
bytes_transfered = MIN(bytes_remaining, 32);
@@ -157,30 +157,30 @@ static int i2c_read(struct rk3288_i2c_regs *reg_addr, struct i2c_seg segment)
con |= I2C_EN | I2C_NAK;
words_transfered = ALIGN_UP(bytes_transfered, 4) / 4;
- writel(I2C_CLEANI, &reg_addr->i2c_ipd);
- writel(con, &reg_addr->i2c_con);
- writel(bytes_transfered, &reg_addr->i2c_mrxcnt);
+ write32(&reg_addr->i2c_ipd, I2C_CLEANI);
+ write32(&reg_addr->i2c_con, con);
+ write32(&reg_addr->i2c_mrxcnt, bytes_transfered);
timeout = I2C_TIMEOUT_US;
while (timeout--) {
- if (readl(&reg_addr->i2c_ipd) & I2C_NAKRCVI) {
- writel(0, &reg_addr->i2c_mrxcnt);
- writel(0, &reg_addr->i2c_con);
+ if (read32(&reg_addr->i2c_ipd) & I2C_NAKRCVI) {
+ write32(&reg_addr->i2c_mrxcnt, 0);
+ write32(&reg_addr->i2c_con, 0);
return I2C_NOACK;
}
- if (readl(&reg_addr->i2c_ipd) & I2C_MBRFI)
+ if (read32(&reg_addr->i2c_ipd) & I2C_MBRFI)
break;
udelay(1);
}
if (timeout <= 0) {
printk(BIOS_ERR, "I2C Read::Recv Data Timeout\n");
- writel(0, &reg_addr->i2c_mrxcnt);
- writel(0, &reg_addr->i2c_con);
+ write32(&reg_addr->i2c_mrxcnt, 0);
+ write32(&reg_addr->i2c_con, 0);
return I2C_TIMEOUT;
}
for (i = 0; i < words_transfered; i++) {
- rxdata = readl(&reg_addr->rxdata[i]);
+ rxdata = read32(&reg_addr->rxdata[i]);
i2c_info("I2c Read::RXDATA[%d] = 0x%x\n", i, rxdata);
for (j = 0; j < 4; j++) {
if ((i * 4 + j) == bytes_transfered)
@@ -215,32 +215,33 @@ static int i2c_write(struct rk3288_i2c_regs *reg_addr, struct i2c_seg segment)
break;
txdata |= (*data++) << (j * 8);
} while (++j < 4);
- writel(txdata, &reg_addr->txdata[i]);
+ write32(&reg_addr->txdata[i], txdata);
j = 0;
i2c_info("I2c Write::TXDATA[%d] = 0x%x\n", i, txdata);
txdata = 0;
}
- writel(I2C_CLEANI, &reg_addr->i2c_ipd);
- writel(I2C_EN | I2C_MODE_TX | I2C_ACT2NAK, &reg_addr->i2c_con);
- writel(bytes_transfered, &reg_addr->i2c_mtxcnt);
+ write32(&reg_addr->i2c_ipd, I2C_CLEANI);
+ write32(&reg_addr->i2c_con,
+ I2C_EN | I2C_MODE_TX | I2C_ACT2NAK);
+ write32(&reg_addr->i2c_mtxcnt, bytes_transfered);
timeout = I2C_TIMEOUT_US;
while (timeout--) {
- if (readl(&reg_addr->i2c_ipd) & I2C_NAKRCVI) {
- writel(0, &reg_addr->i2c_mtxcnt);
- writel(0, &reg_addr->i2c_con);
+ if (read32(&reg_addr->i2c_ipd) & I2C_NAKRCVI) {
+ write32(&reg_addr->i2c_mtxcnt, 0);
+ write32(&reg_addr->i2c_con, 0);
return I2C_NOACK;
}
- if (readl(&reg_addr->i2c_ipd) & I2C_MBTFI)
+ if (read32(&reg_addr->i2c_ipd) & I2C_MBTFI)
break;
udelay(1);
}
if (timeout <= 0) {
printk(BIOS_ERR, "I2C Write::Send Data Timeout\n");
- writel(0, &reg_addr->i2c_mtxcnt);
- writel(0, &reg_addr->i2c_con);
+ write32(&reg_addr->i2c_mtxcnt, 0);
+ write32(&reg_addr->i2c_con, 0);
return I2C_TIMEOUT;
}
@@ -310,5 +311,5 @@ void i2c_init(unsigned int bus, unsigned int hz)
divh = clk_div * 3 / 7 - 1;
divl = clk_div - divh - 2;
assert((divh < 65536) && (divl < 65536));
- writel((divh << 16) | (divl << 0), &regs->i2c_clkdiv);
+ write32(&regs->i2c_clkdiv, (divh << 16) | (divl << 0));
}
diff --git a/src/soc/rockchip/rk3288/pwm.c b/src/soc/rockchip/rk3288/pwm.c
index a44724959e..fb47dc8312 100644
--- a/src/soc/rockchip/rk3288/pwm.c
+++ b/src/soc/rockchip/rk3288/pwm.c
@@ -73,17 +73,15 @@ void pwm_init(u32 id, u32 period_ns, u32 duty_ns)
unsigned long period, duty;
/*use rk pwm*/
- writel(RK_SETBITS(1 << 0), &rk3288_grf->soc_con2);
+ write32(&rk3288_grf->soc_con2, RK_SETBITS(1 << 0));
- writel(PWM_SEL_SRC_CLK | PWM_OUTPUT_LEFT | PWM_LP_DISABLE |
- PWM_CONTINUOUS | PWM_DUTY_POSTIVE | PWM_INACTIVE_POSTIVE |
- RK_PWM_DISABLE,
- &rk3288_pwm->pwm[id].pwm_ctrl);
+ write32(&rk3288_pwm->pwm[id].pwm_ctrl,
+ PWM_SEL_SRC_CLK | PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_CONTINUOUS | PWM_DUTY_POSTIVE | PWM_INACTIVE_POSTIVE | RK_PWM_DISABLE);
period = (PD_BUS_PCLK_HZ / 1000) * period_ns / USECS_PER_SEC;
duty = (PD_BUS_PCLK_HZ / 1000) * duty_ns / USECS_PER_SEC;
- writel(period, &rk3288_pwm->pwm[id].pwm_period_hpr);
- writel(duty, &rk3288_pwm->pwm[id].pwm_duty_lpr);
+ write32(&rk3288_pwm->pwm[id].pwm_period_hpr, period);
+ write32(&rk3288_pwm->pwm[id].pwm_duty_lpr, duty);
setbits_le32(&rk3288_pwm->pwm[id].pwm_ctrl, RK_PWM_ENABLE);
}
diff --git a/src/soc/rockchip/rk3288/sdram.c b/src/soc/rockchip/rk3288/sdram.c
index 44f9172bee..86acf6dc3f 100644
--- a/src/soc/rockchip/rk3288/sdram.c
+++ b/src/soc/rockchip/rk3288/sdram.c
@@ -515,7 +515,7 @@ static void copy_to_reg(u32 *dest, const u32 *src, u32 n)
{
int i;
for (i = 0; i < n / sizeof(u32); i++) {
- writel(*src, dest);
+ write32(dest, *src);
src++;
dest++;
}
@@ -571,27 +571,27 @@ static void phy_dll_bypass_set(struct rk3288_ddr_publ_regs *ddr_publ_regs,
static void dfi_cfg(struct rk3288_ddr_pctl_regs *ddr_pctl_regs, u32 dramtype)
{
- writel(DFI_INIT_START, &ddr_pctl_regs->dfistcfg0);
- writel(DFI_DRAM_CLK_SR_EN | DFI_DRAM_CLK_DPD_EN,
- &ddr_pctl_regs->dfistcfg1);
- writel(DFI_PARITY_INTR_EN | DFI_PARITY_EN, &ddr_pctl_regs->dfistcfg2);
- writel(TLP_RESP_TIME(7) | LP_SR_EN | LP_PD_EN,
- &ddr_pctl_regs->dfilpcfg0);
-
- writel(TCTRL_DELAY_TIME(2), &ddr_pctl_regs->dfitctrldelay);
- writel(TPHY_WRDATA_TIME(1), &ddr_pctl_regs->dfitphywrdata);
- writel(TPHY_RDLAT_TIME(0xf), &ddr_pctl_regs->dfitphyrdlat);
- writel(TDRAM_CLK_DIS_TIME(2), &ddr_pctl_regs->dfitdramclkdis);
- writel(TDRAM_CLK_EN_TIME(2), &ddr_pctl_regs->dfitdramclken);
- writel(0x1, &ddr_pctl_regs->dfitphyupdtype0);
+ write32(&ddr_pctl_regs->dfistcfg0, DFI_INIT_START);
+ write32(&ddr_pctl_regs->dfistcfg1,
+ DFI_DRAM_CLK_SR_EN | DFI_DRAM_CLK_DPD_EN);
+ write32(&ddr_pctl_regs->dfistcfg2, DFI_PARITY_INTR_EN | DFI_PARITY_EN);
+ write32(&ddr_pctl_regs->dfilpcfg0,
+ TLP_RESP_TIME(7) | LP_SR_EN | LP_PD_EN);
+
+ write32(&ddr_pctl_regs->dfitctrldelay, TCTRL_DELAY_TIME(2));
+ write32(&ddr_pctl_regs->dfitphywrdata, TPHY_WRDATA_TIME(1));
+ write32(&ddr_pctl_regs->dfitphyrdlat, TPHY_RDLAT_TIME(0xf));
+ write32(&ddr_pctl_regs->dfitdramclkdis, TDRAM_CLK_DIS_TIME(2));
+ write32(&ddr_pctl_regs->dfitdramclken, TDRAM_CLK_EN_TIME(2));
+ write32(&ddr_pctl_regs->dfitphyupdtype0, 0x1);
/* cs0 and cs1 write odt enable */
- writel((RANK0_ODT_WRITE_SEL | RANK1_ODT_WRITE_SEL),
- &ddr_pctl_regs->dfiodtcfg);
+ write32(&ddr_pctl_regs->dfiodtcfg,
+ (RANK0_ODT_WRITE_SEL | RANK1_ODT_WRITE_SEL));
/* odt write length */
- writel(ODT_LEN_BL8_W(7), &ddr_pctl_regs->dfiodtcfg1);
+ write32(&ddr_pctl_regs->dfiodtcfg1, ODT_LEN_BL8_W(7));
/* phyupd and ctrlupd disabled */
- writel(0, &ddr_pctl_regs->dfiupdcfg);
+ write32(&ddr_pctl_regs->dfiupdcfg, 0);
}
static void pctl_cfg(u32 channel,
@@ -605,39 +605,33 @@ static void pctl_cfg(u32 channel,
sizeof(sdram_params->pctl_timing));
switch (sdram_params->dramtype) {
case LPDDR3:
- writel(sdram_params->pctl_timing.tcl - 1,
- &ddr_pctl_regs->dfitrddataen);
- writel(sdram_params->pctl_timing.tcwl,
- &ddr_pctl_regs->dfitphywrlat);
- writel(LPDDR2_S4 | MDDR_LPDDR2_CLK_STOP_IDLE(0) | LPDDR2_EN
- | BURSTLENGTH_CFG(burstlen) | TFAW_CFG(6) | PD_EXIT_FAST
- | PD_TYPE(1) | PD_IDLE(0), &ddr_pctl_regs->mcfg);
- writel(MSCH_MAINDDR3(channel, 0), &rk3288_grf->soc_con0);
-
- writel(PUBL_LPDDR3_EN(channel, 1)
- | PCTL_BST_DISABLE(channel, 1)
- | PCTL_LPDDR3_ODT_EN(channel, sdram_params->odt),
- &rk3288_grf->soc_con2);
+ write32(&ddr_pctl_regs->dfitrddataen,
+ sdram_params->pctl_timing.tcl - 1);
+ write32(&ddr_pctl_regs->dfitphywrlat,
+ sdram_params->pctl_timing.tcwl);
+ write32(&ddr_pctl_regs->mcfg,
+ LPDDR2_S4 | MDDR_LPDDR2_CLK_STOP_IDLE(0) | LPDDR2_EN | BURSTLENGTH_CFG(burstlen) | TFAW_CFG(6) | PD_EXIT_FAST | PD_TYPE(1) | PD_IDLE(0));
+ write32(&rk3288_grf->soc_con0, MSCH_MAINDDR3(channel, 0));
+
+ write32(&rk3288_grf->soc_con2,
+ PUBL_LPDDR3_EN(channel, 1) | PCTL_BST_DISABLE(channel, 1) | PCTL_LPDDR3_ODT_EN(channel, sdram_params->odt));
break;
case DDR3:
if (sdram_params->phy_timing.mr[1] & DDR3_DLL_DISABLE)
- writel(sdram_params->pctl_timing.tcl - 3,
- &ddr_pctl_regs->dfitrddataen);
+ write32(&ddr_pctl_regs->dfitrddataen,
+ sdram_params->pctl_timing.tcl - 3);
else
- writel(sdram_params->pctl_timing.tcl - 2,
- &ddr_pctl_regs->dfitrddataen);
- writel(sdram_params->pctl_timing.tcwl - 1,
- &ddr_pctl_regs->dfitphywrlat);
- writel(MDDR_LPDDR2_CLK_STOP_IDLE(0) | DDR3_EN
- | DDR2_DDR3_BL_8 | TFAW_CFG(6) | PD_EXIT_SLOW
- | PD_TYPE(1) | PD_IDLE(0), &ddr_pctl_regs->mcfg);
- writel(MSCH_MAINDDR3(channel, 1), &rk3288_grf->soc_con0);
-
- writel(PUBL_LPDDR3_EN(channel, 0)
- | PCTL_BST_DISABLE(channel, 0)
- | PCTL_LPDDR3_ODT_EN(channel, 0),
- &rk3288_grf->soc_con2);
+ write32(&ddr_pctl_regs->dfitrddataen,
+ sdram_params->pctl_timing.tcl - 2);
+ write32(&ddr_pctl_regs->dfitphywrlat,
+ sdram_params->pctl_timing.tcwl - 1);
+ write32(&ddr_pctl_regs->mcfg,
+ MDDR_LPDDR2_CLK_STOP_IDLE(0) | DDR3_EN | DDR2_DDR3_BL_8 | TFAW_CFG(6) | PD_EXIT_SLOW | PD_TYPE(1) | PD_IDLE(0));
+ write32(&rk3288_grf->soc_con0, MSCH_MAINDDR3(channel, 1));
+
+ write32(&rk3288_grf->soc_con2,
+ PUBL_LPDDR3_EN(channel, 0) | PCTL_BST_DISABLE(channel, 0) | PCTL_LPDDR3_ODT_EN(channel, 0));
break;
}
@@ -656,23 +650,17 @@ static void phy_cfg(u32 channel, const struct rk3288_sdram_params *sdram_params)
copy_to_reg(&ddr_publ_regs->dtpr[0],
&(sdram_params->phy_timing.dtpr0),
sizeof(sdram_params->phy_timing));
- writel(sdram_params->noc_timing, &msch_regs->ddrtiming);
- writel(0x3f, &msch_regs->readlatency);
- writel(sdram_params->noc_activate, &msch_regs->activate);
- writel(BUSWRTORD(2) | BUSRDTOWR(2) | BUSRDTORD(1),
- &msch_regs->devtodev);
- writel(PRT_DLLLOCK(div_round_up(sdram_params->ddr_freq/MHz
- * 5120, 1000))
- | PRT_DLLSRST(div_round_up(sdram_params->ddr_freq/MHz
- * 50, 1000))
- | PRT_ITMSRST(8), &ddr_publ_regs->ptr[0]);
- writel(PRT_DINIT0(div_round_up(sdram_params->ddr_freq/MHz
- * 500000, 1000))
- | PRT_DINIT1(div_round_up(sdram_params->ddr_freq/MHz
- * 400, 1000)), &ddr_publ_regs->ptr[1]);
- writel(PRT_DINIT2(MIN(dinit2, 0x1ffff))
- | PRT_DINIT3(div_round_up(sdram_params->ddr_freq/MHz
- * 1000, 1000)), &ddr_publ_regs->ptr[2]);
+ write32(&msch_regs->ddrtiming, sdram_params->noc_timing);
+ write32(&msch_regs->readlatency, 0x3f);
+ write32(&msch_regs->activate, sdram_params->noc_activate);
+ write32(&msch_regs->devtodev,
+ BUSWRTORD(2) | BUSRDTOWR(2) | BUSRDTORD(1));
+ write32(&ddr_publ_regs->ptr[0],
+ PRT_DLLLOCK(div_round_up(sdram_params->ddr_freq / MHz * 5120, 1000)) | PRT_DLLSRST(div_round_up(sdram_params->ddr_freq / MHz * 50, 1000)) | PRT_ITMSRST(8));
+ write32(&ddr_publ_regs->ptr[1],
+ PRT_DINIT0(div_round_up(sdram_params->ddr_freq / MHz * 500000, 1000)) | PRT_DINIT1(div_round_up(sdram_params->ddr_freq / MHz * 400, 1000)));
+ write32(&ddr_publ_regs->ptr[2],
+ PRT_DINIT2(MIN(dinit2, 0x1ffff)) | PRT_DINIT3(div_round_up(sdram_params->ddr_freq / MHz * 1000, 1000)));
switch (sdram_params->dramtype) {
case LPDDR3:
@@ -683,8 +671,8 @@ static void phy_cfg(u32 channel, const struct rk3288_sdram_params *sdram_params)
DDRMD_CFG(DDRMD_LPDDR2_LPDDR3));
clrsetbits_le32(&ddr_publ_regs->dxccr, DQSNRES_MSK | DQSRES_MSK,
DQSRES_CFG(4) | DQSNRES_CFG(0xc));
- i = TDQSCKMAX_VAL(readl(&ddr_publ_regs->dtpr[1]))
- - TDQSCK_VAL(readl(&ddr_publ_regs->dtpr[1]));
+ i = TDQSCKMAX_VAL(read32(&ddr_publ_regs->dtpr[1]))
+ - TDQSCK_VAL(read32(&ddr_publ_regs->dtpr[1]));
clrsetbits_le32(&ddr_publ_regs->dsgcr, DQSGE_MSK | DQSGX_MSK,
DQSGE_CFG(i) | DQSGX_CFG(i));
break;
@@ -713,7 +701,7 @@ static void phy_init(struct rk3288_ddr_publ_regs *ddr_publ_regs)
setbits_le32(&ddr_publ_regs->pir, PIR_INIT | PIR_DLLSRST
| PIR_DLLLOCK | PIR_ZCAL | PIR_ITMSRST | PIR_CLRSR);
udelay(1);
- while ((readl(&ddr_publ_regs->pgsr) &
+ while ((read32(&ddr_publ_regs->pgsr) &
(PGSR_IDONE | PGSR_DLDONE | PGSR_ZCDONE)) !=
(PGSR_IDONE | PGSR_DLDONE | PGSR_ZCDONE))
;
@@ -722,9 +710,9 @@ static void phy_init(struct rk3288_ddr_publ_regs *ddr_publ_regs)
static void send_command(struct rk3288_ddr_pctl_regs *ddr_pctl_regs, u32 rank,
u32 cmd, u32 arg)
{
- writel((START_CMD | (rank << 20) | arg | cmd), &ddr_pctl_regs->mcmd);
+ write32(&ddr_pctl_regs->mcmd, (START_CMD | (rank << 20) | arg | cmd));
udelay(1);
- while (readl(&ddr_pctl_regs->mcmd) & START_CMD)
+ while (read32(&ddr_pctl_regs->mcmd) & START_CMD)
;
}
@@ -736,7 +724,7 @@ static void memory_init(struct rk3288_ddr_publ_regs *ddr_publ_regs,
| PIR_ZCALBYP | PIR_CLRSR | PIR_ICPC
| (dramtype == DDR3 ? PIR_DRAMRST : 0)));
udelay(1);
- while ((readl(&ddr_publ_regs->pgsr) & (PGSR_IDONE | PGSR_DLDONE))
+ while ((read32(&ddr_publ_regs->pgsr) & (PGSR_IDONE | PGSR_DLDONE))
!= (PGSR_IDONE | PGSR_DLDONE))
;
}
@@ -747,16 +735,16 @@ static void move_to_config_state(struct rk3288_ddr_publ_regs *ddr_publ_regs,
unsigned int state;
while (1) {
- state = readl(&ddr_pctl_regs->stat) & PCTL_STAT_MSK;
+ state = read32(&ddr_pctl_regs->stat) & PCTL_STAT_MSK;
switch (state) {
case LOW_POWER:
- writel(WAKEUP_STATE, &ddr_pctl_regs->sctl);
- while ((readl(&ddr_pctl_regs->stat) & PCTL_STAT_MSK)
+ write32(&ddr_pctl_regs->sctl, WAKEUP_STATE);
+ while ((read32(&ddr_pctl_regs->stat) & PCTL_STAT_MSK)
!= ACCESS)
;
/* wait DLL lock */
- while ((readl(&ddr_publ_regs->pgsr) & PGSR_DLDONE)
+ while ((read32(&ddr_publ_regs->pgsr) & PGSR_DLDONE)
!= PGSR_DLDONE)
;
/* if at low power state,need wakeup first,
@@ -765,8 +753,8 @@ static void move_to_config_state(struct rk3288_ddr_publ_regs *ddr_publ_regs,
*/
case ACCESS:
case INIT_MEM:
- writel(CFG_STATE, &ddr_pctl_regs->sctl);
- while ((readl(&ddr_pctl_regs->stat) & PCTL_STAT_MSK)
+ write32(&ddr_pctl_regs->sctl, CFG_STATE);
+ while ((read32(&ddr_pctl_regs->stat) & PCTL_STAT_MSK)
!= CONFIG)
;
break;
@@ -786,8 +774,7 @@ static void set_bandwidth_ratio(u32 channel, u32 n)
if (n == 1) {
setbits_le32(&ddr_pctl_regs->ppcfg, 1);
- writel(RK_SETBITS(1 << (8 + channel)),
- &rk3288_grf->soc_con0);
+ write32(&rk3288_grf->soc_con0, RK_SETBITS(1 << (8 + channel)));
setbits_le32(&msch_regs->ddrtiming, 1 << 31);
/* Data Byte disable*/
clrbits_le32(&ddr_publ_regs->datx8[2].dxgcr, 1);
@@ -799,8 +786,7 @@ static void set_bandwidth_ratio(u32 channel, u32 n)
DXDLLCR_DLLDIS);
} else {
clrbits_le32(&ddr_pctl_regs->ppcfg, 1);
- writel(RK_CLRBITS(1 << (8 + channel)),
- &rk3288_grf->soc_con0);
+ write32(&rk3288_grf->soc_con0, RK_CLRBITS(1 << (8 + channel)));
clrbits_le32(&msch_regs->ddrtiming, 1 << 31);
/* Data Byte enable*/
setbits_le32(&ddr_publ_regs->datx8[2].dxgcr, 1);
@@ -838,7 +824,7 @@ static int data_training(u32 channel,
struct rk3288_ddr_pctl_regs *ddr_pctl_regs = rk3288_ddr_pctl[channel];
/* disable auto refresh */
- writel(0, &ddr_pctl_regs->trefi);
+ write32(&ddr_pctl_regs->trefi, 0);
if (sdram_params->dramtype != LPDDR3)
setbits_le32(&ddr_publ_regs->pgcr, PGCR_DQSCFG(1));
@@ -856,21 +842,21 @@ static int data_training(u32 channel,
PIR_CLRSR);
udelay(1);
/* wait echo byte DTDONE */
- while ((readl(&ddr_publ_regs->datx8[0].dxgsr[0]) & rank)
+ while ((read32(&ddr_publ_regs->datx8[0].dxgsr[0]) & rank)
!= rank)
;
- while ((readl(&ddr_publ_regs->datx8[1].dxgsr[0]) & rank)
+ while ((read32(&ddr_publ_regs->datx8[1].dxgsr[0]) & rank)
!= rank)
;
- if (!(readl(&ddr_pctl_regs->ppcfg) & 1)) {
- while ((readl(&ddr_publ_regs->datx8[2].dxgsr[0])
+ if (!(read32(&ddr_pctl_regs->ppcfg) & 1)) {
+ while ((read32(&ddr_publ_regs->datx8[2].dxgsr[0])
& rank) != rank)
;
- while ((readl(&ddr_publ_regs->datx8[3].dxgsr[0])
+ while ((read32(&ddr_publ_regs->datx8[3].dxgsr[0])
& rank) != rank)
;
}
- if (readl(&ddr_publ_regs->pgsr) &
+ if (read32(&ddr_publ_regs->pgsr) &
(PGSR_DTERR | PGSR_RVERR | PGSR_RVEIRR)) {
ret = -1;
break;
@@ -884,7 +870,7 @@ static int data_training(u32 channel,
clrbits_le32(&ddr_publ_regs->pgcr, PGCR_DQSCFG(1));
/* resume auto refresh */
- writel(sdram_params->pctl_timing.trefi, &ddr_pctl_regs->trefi);
+ write32(&ddr_pctl_regs->trefi, sdram_params->pctl_timing.trefi);
return ret;
}
@@ -897,30 +883,30 @@ static void move_to_access_state(u32 chnum)
unsigned int state;
while (1) {
- state = readl(&ddr_pctl_regs->stat) & PCTL_STAT_MSK;
+ state = read32(&ddr_pctl_regs->stat) & PCTL_STAT_MSK;
switch (state) {
case LOW_POWER:
- if (LP_TRIG_VAL(readl(&ddr_pctl_regs->stat)) == 1)
+ if (LP_TRIG_VAL(read32(&ddr_pctl_regs->stat)) == 1)
return;
- writel(WAKEUP_STATE, &ddr_pctl_regs->sctl);
- while ((readl(&ddr_pctl_regs->stat) & PCTL_STAT_MSK)
+ write32(&ddr_pctl_regs->sctl, WAKEUP_STATE);
+ while ((read32(&ddr_pctl_regs->stat) & PCTL_STAT_MSK)
!= ACCESS)
;
/* wait DLL lock */
- while ((readl(&ddr_publ_regs->pgsr) & PGSR_DLDONE)
+ while ((read32(&ddr_publ_regs->pgsr) & PGSR_DLDONE)
!= PGSR_DLDONE)
;
break;
case INIT_MEM:
- writel(CFG_STATE, &ddr_pctl_regs->sctl);
- while ((readl(&ddr_pctl_regs->stat) & PCTL_STAT_MSK)
+ write32(&ddr_pctl_regs->sctl, CFG_STATE);
+ while ((read32(&ddr_pctl_regs->stat) & PCTL_STAT_MSK)
!= CONFIG)
;
case CONFIG:
- writel(GO_STATE, &ddr_pctl_regs->sctl);
- while ((readl(&ddr_pctl_regs->stat) & PCTL_STAT_MSK)
+ write32(&ddr_pctl_regs->sctl, GO_STATE);
+ while ((read32(&ddr_pctl_regs->stat) & PCTL_STAT_MSK)
== CONFIG)
;
break;
@@ -943,7 +929,7 @@ static void dram_cfg_rbc(u32 chnum,
else
clrbits_le32(&ddr_publ_regs->dcr, PDQ_MSK);
- writel(sdram_params->ddrconfig, &msch_regs->ddrconf);
+ write32(&msch_regs->ddrconf, sdram_params->ddrconfig);
}
static void dram_all_config(const struct rk3288_sdram_params *sdram_params)
@@ -968,9 +954,9 @@ static void dram_all_config(const struct rk3288_sdram_params *sdram_params)
dram_cfg_rbc(channel, sdram_params);
}
- writel(sys_reg, &rk3288_pmu->sys_reg[2]);
- writel(RK_CLRSETBITS(0x1F, sdram_params->stride),
- &rk3288_sgrf->soc_con2);
+ write32(&rk3288_pmu->sys_reg[2], sys_reg);
+ write32(&rk3288_sgrf->soc_con2,
+ RK_CLRSETBITS(0x1F, sdram_params->stride));
}
void sdram_init(const struct rk3288_sdram_params *sdram_params)
@@ -1007,8 +993,8 @@ void sdram_init(const struct rk3288_sdram_params *sdram_params)
phy_init(ddr_publ_regs);
- writel(POWER_UP_START, &ddr_pctl_regs->powctl);
- while (!(readl(&ddr_pctl_regs->powstat) & POWER_UP_DONE))
+ write32(&ddr_pctl_regs->powctl, POWER_UP_START);
+ while (!(read32(&ddr_pctl_regs->powstat) & POWER_UP_DONE))
;
memory_init(ddr_publ_regs, sdram_params->dramtype);
@@ -1045,8 +1031,8 @@ void sdram_init(const struct rk3288_sdram_params *sdram_params)
/* DS=40ohm,ODT=155ohm */
zqcr = ZDEN(1) | PU_ONDIE(0x2) | PD_ONDIE(0x2)
| PU_OUTPUT(0x19) | PD_OUTPUT(0x19);
- writel(zqcr, &ddr_publ_regs->zq1cr[0]);
- writel(zqcr, &ddr_publ_regs->zq0cr[0]);
+ write32(&ddr_publ_regs->zq1cr[0], zqcr);
+ write32(&ddr_publ_regs->zq0cr[0], zqcr);
if (sdram_params->dramtype == LPDDR3) {
/* LPDDR2/LPDDR3 need to wait DAI complete, max 10us */
@@ -1056,11 +1042,11 @@ void sdram_init(const struct rk3288_sdram_params *sdram_params)
MRS_CMD, LPDDR2_MA(11) |
sdram_params->odt ? LPDDR2_OP(3) : 0);
if (channel == 0) {
- writel(0, &ddr_pctl_regs->mrrcfg0);
+ write32(&ddr_pctl_regs->mrrcfg0, 0);
send_command(ddr_pctl_regs, 1, MRR_CMD,
LPDDR2_MA(0x8));
/* S8 */
- if ((readl(&ddr_pctl_regs->mrrstat0) & 0x3)
+ if ((read32(&ddr_pctl_regs->mrrstat0) & 0x3)
!= 3)
die("SDRAM initialization failed!");
}
@@ -1078,7 +1064,7 @@ void sdram_init(const struct rk3288_sdram_params *sdram_params)
if (sdram_params->dramtype == LPDDR3) {
u32 i;
- writel(0, &ddr_pctl_regs->mrrcfg0);
+ write32(&ddr_pctl_regs->mrrcfg0, 0);
for (i = 0; i < 17; i++)
send_command(ddr_pctl_regs, 1, MRR_CMD,
LPDDR2_MA(i));
@@ -1098,7 +1084,7 @@ size_t sdram_size_mb(void)
if (!size_mb) {
- u32 sys_reg = readl(&rk3288_pmu->sys_reg[2]);
+ u32 sys_reg = read32(&rk3288_pmu->sys_reg[2]);
u32 ch_num = SYS_REG_DEC_NUM_CH(sys_reg);
for (ch = 0; ch < ch_num; ch++) {
diff --git a/src/soc/rockchip/rk3288/software_i2c.c b/src/soc/rockchip/rk3288/software_i2c.c
index a71fcd16bf..2df0a2857a 100644
--- a/src/soc/rockchip/rk3288/software_i2c.c
+++ b/src/soc/rockchip/rk3288/software_i2c.c
@@ -81,20 +81,20 @@ void software_i2c_attach(unsigned bus)
clrbits_le32(&rk3288_pmu->iomux_i2c0sda, IOMUX_I2C0SDA);
break;
case 1:
- writel(IOMUX_GPIO(IOMUX_I2C1), &rk3288_grf->iomux_i2c1);
+ write32(&rk3288_grf->iomux_i2c1, IOMUX_GPIO(IOMUX_I2C1));
break;
case 2:
- writel(IOMUX_GPIO(IOMUX_I2C2), &rk3288_grf->iomux_i2c2);
+ write32(&rk3288_grf->iomux_i2c2, IOMUX_GPIO(IOMUX_I2C2));
break;
case 3:
- writel(IOMUX_GPIO(IOMUX_I2C3), &rk3288_grf->iomux_i2c3);
+ write32(&rk3288_grf->iomux_i2c3, IOMUX_GPIO(IOMUX_I2C3));
break;
case 4:
- writel(IOMUX_GPIO(IOMUX_I2C4), &rk3288_grf->iomux_i2c4);
+ write32(&rk3288_grf->iomux_i2c4, IOMUX_GPIO(IOMUX_I2C4));
break;
case 5:
- writel(IOMUX_GPIO(IOMUX_I2C5SCL), &rk3288_grf->iomux_i2c5scl);
- writel(IOMUX_GPIO(IOMUX_I2C5SDA), &rk3288_grf->iomux_i2c5sda);
+ write32(&rk3288_grf->iomux_i2c5scl, IOMUX_GPIO(IOMUX_I2C5SCL));
+ write32(&rk3288_grf->iomux_i2c5sda, IOMUX_GPIO(IOMUX_I2C5SDA));
break;
default:
die("Unknown I2C bus number!");
@@ -116,20 +116,20 @@ void software_i2c_detach(unsigned bus)
setbits_le32(&rk3288_pmu->iomux_i2c0sda, IOMUX_I2C0SDA);
break;
case 1:
- writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1);
+ write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);
break;
case 2:
- writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2);
+ write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2);
break;
case 3:
- writel(IOMUX_I2C3, &rk3288_grf->iomux_i2c3);
+ write32(&rk3288_grf->iomux_i2c3, IOMUX_I2C3);
break;
case 4:
- writel(IOMUX_I2C4, &rk3288_grf->iomux_i2c4);
+ write32(&rk3288_grf->iomux_i2c4, IOMUX_I2C4);
break;
case 5:
- writel(IOMUX_I2C5SCL, &rk3288_grf->iomux_i2c5scl);
- writel(IOMUX_I2C5SDA, &rk3288_grf->iomux_i2c5sda);
+ write32(&rk3288_grf->iomux_i2c5scl, IOMUX_I2C5SCL);
+ write32(&rk3288_grf->iomux_i2c5sda, IOMUX_I2C5SDA);
break;
default:
die("Unknown I2C bus number!");
diff --git a/src/soc/rockchip/rk3288/spi.c b/src/soc/rockchip/rk3288/spi.c
index fe4e377a08..aa70f3e0e5 100644
--- a/src/soc/rockchip/rk3288/spi.c
+++ b/src/soc/rockchip/rk3288/spi.c
@@ -87,9 +87,9 @@ static void spi_cs_deactivate(struct spi_slave *slave)
static void rockchip_spi_enable_chip(struct rockchip_spi *regs, int enable)
{
if (enable == 1)
- writel(1, &regs->spienr);
+ write32(&regs->spienr, 1);
else
- writel(0, &regs->spienr);
+ write32(&regs->spienr, 0);
}
static void rockchip_spi_set_clk(struct rockchip_spi *regs, unsigned int hz)
@@ -100,7 +100,7 @@ static void rockchip_spi_set_clk(struct rockchip_spi *regs, unsigned int hz)
clk_div = SPI_SRCCLK_HZ / hz;
clk_div = (clk_div + 1) & 0xfffe;
assert((clk_div - 1) * hz == SPI_SRCCLK_HZ);
- writel(clk_div, &regs->baudr);
+ write32(&regs->baudr, clk_div);
}
void rockchip_spi_init(unsigned int bus, unsigned int speed_hz)
@@ -139,11 +139,11 @@ void rockchip_spi_init(unsigned int bus, unsigned int speed_hz)
/* Frame Format */
ctrlr0 |= (SPI_FRF_SPI << SPI_FRF_OFFSET);
- writel(ctrlr0, &regs->ctrlr0);
+ write32(&regs->ctrlr0, ctrlr0);
/* fifo depth */
- writel(SPI_FIFO_DEPTH / 2 - 1, &regs->txftlr);
- writel(SPI_FIFO_DEPTH / 2 - 1, &regs->rxftlr);
+ write32(&regs->txftlr, SPI_FIFO_DEPTH / 2 - 1);
+ write32(&regs->rxftlr, SPI_FIFO_DEPTH / 2 - 1);
}
int spi_claim_bus(struct spi_slave *slave)
@@ -163,7 +163,7 @@ static int rockchip_spi_wait_till_not_busy(struct rockchip_spi *regs)
stopwatch_init_usecs_expire(&sw, SPI_TIMEOUT_US);
do {
- if (!(readl(&regs->sr) & SR_BUSY))
+ if (!(read32(&regs->sr) & SR_BUSY))
return 0;
} while (!stopwatch_expired(&sw));
printk(BIOS_DEBUG,
@@ -207,18 +207,18 @@ static int do_xfer(struct spi_slave *slave, const void *dout,
min_xfer = MIN(*bytes_in, *bytes_out);
while (min_xfer) {
- uint32_t sr = readl(&regs->sr);
+ uint32_t sr = read32(&regs->sr);
int xferred = 0; /* in either (or both) directions */
if (*bytes_out && !(sr & SR_TF_FULL)) {
- writel(*out_buf, &regs->txdr);
+ write32(&regs->txdr, *out_buf);
out_buf++;
*bytes_out -= 1;
xferred = 1;
}
if (*bytes_in && !(sr & SR_RF_EMPT)) {
- *in_buf = readl(&regs->rxdr) & 0xff;
+ *in_buf = read32(&regs->rxdr) & 0xff;
in_buf++;
*bytes_in -= 1;
xferred = 1;
@@ -266,7 +266,7 @@ int spi_xfer(struct spi_slave *slave, const void *dout,
set_transfer_mode(regs, bytes_out, bytes_in);
/* MAX() in case either counter is 0 */
- writel(MAX(in_now, out_now) - 1, &regs->ctrlr1);
+ write32(&regs->ctrlr1, MAX(in_now, out_now) - 1);
rockchip_spi_enable_chip(regs, 1);
diff --git a/src/soc/rockchip/rk3288/timer.c b/src/soc/rockchip/rk3288/timer.c
index d373f7a39c..07be49bfe9 100644
--- a/src/soc/rockchip/rk3288/timer.c
+++ b/src/soc/rockchip/rk3288/timer.c
@@ -41,7 +41,7 @@ void timer_monotonic_get(struct mono_time *mt)
void init_timer(void)
{
- writel(TIMER_LOAD_VAL, &timer7_ptr->timer_load_count0);
- writel(TIMER_LOAD_VAL, &timer7_ptr->timer_load_count1);
- writel(1, &timer7_ptr->timer_ctrl_reg);
+ write32(&timer7_ptr->timer_load_count0, TIMER_LOAD_VAL);
+ write32(&timer7_ptr->timer_load_count1, TIMER_LOAD_VAL);
+ write32(&timer7_ptr->timer_ctrl_reg, 1);
}
diff --git a/src/soc/rockchip/rk3288/tsadc.c b/src/soc/rockchip/rk3288/tsadc.c
index a2d6ec499a..cada767889 100644
--- a/src/soc/rockchip/rk3288/tsadc.c
+++ b/src/soc/rockchip/rk3288/tsadc.c
@@ -94,13 +94,13 @@ void tsadc_init(void)
TSHUT_CRU_EN_SRC2 | TSHUT_CRU_EN_SRC1 |
TSHUT_GPIO_EN_SRC2 | TSHUT_GPIO_EN_SRC1);
- writel(AUTO_PERIOD, &rk3288_tsadc->auto_period);
- writel(AUTO_DEBOUNCE, &rk3288_tsadc->hight_int_debounce);
- writel(AUTO_PERIOD_HT, &rk3288_tsadc->auto_period_ht);
- writel(AUTO_DEBOUNCE_HT, &rk3288_tsadc->hight_tshut_debounce);
+ write32(&rk3288_tsadc->auto_period, AUTO_PERIOD);
+ write32(&rk3288_tsadc->hight_int_debounce, AUTO_DEBOUNCE);
+ write32(&rk3288_tsadc->auto_period_ht, AUTO_PERIOD_HT);
+ write32(&rk3288_tsadc->hight_tshut_debounce, AUTO_DEBOUNCE_HT);
- writel(TSADC_SHUT_VALUE, &rk3288_tsadc->comp1_shut);
- writel(TSADC_SHUT_VALUE, &rk3288_tsadc->comp2_shut);
+ write32(&rk3288_tsadc->comp1_shut, TSADC_SHUT_VALUE);
+ write32(&rk3288_tsadc->comp2_shut, TSADC_SHUT_VALUE);
/* polarity set to high,channel1 for cpu,channel2 for gpu */
setbits_le32(&rk3288_tsadc->auto_con, TSHUT_POL_HIGH | SRC2_EN |
diff --git a/src/soc/rockchip/rk3288/uart.c b/src/soc/rockchip/rk3288/uart.c
index 7685ff9a41..8ba1fdee73 100644
--- a/src/soc/rockchip/rk3288/uart.c
+++ b/src/soc/rockchip/rk3288/uart.c
@@ -92,43 +92,42 @@ static void rk3288_uart_init(void)
rk3288_uart_tx_flush();
// Disable interrupts.
- writel(0, &uart_ptr->ier);
+ write32(&uart_ptr->ier, 0);
// Force DTR and RTS to high.
- writel(UART8250_MCR_DTR | UART8250_MCR_RTS, &uart_ptr->mcr);
+ write32(&uart_ptr->mcr, UART8250_MCR_DTR | UART8250_MCR_RTS);
// Set line configuration, access divisor latches.
- writel(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr);
+ write32(&uart_ptr->lcr, UART8250_LCR_DLAB | line_config);
// Set the divisor.
- writel(divisor & 0xff, &uart_ptr->dll);
- writel((divisor >> 8) & 0xff, &uart_ptr->dlm);
+ write32(&uart_ptr->dll, divisor & 0xff);
+ write32(&uart_ptr->dlm, (divisor >> 8) & 0xff);
// Hide the divisor latches.
- writel(line_config, &uart_ptr->lcr);
+ write32(&uart_ptr->lcr, line_config);
// Enable FIFOs, and clear receive and transmit.
- writel(UART8250_FCR_FIFO_EN |
- UART8250_FCR_CLEAR_RCVR |
- UART8250_FCR_CLEAR_XMIT, &uart_ptr->fcr);
+ write32(&uart_ptr->fcr,
+ UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT);
}
static void rk3288_uart_tx_byte(unsigned char data)
{
- while (!(readl(&uart_ptr->lsr) & UART8250_LSR_THRE));
- writel(data, &uart_ptr->thr);
+ while (!(read32(&uart_ptr->lsr) & UART8250_LSR_THRE));
+ write32(&uart_ptr->thr, data);
}
static void rk3288_uart_tx_flush(void)
{
- while (!(readl(&uart_ptr->lsr) & UART8250_LSR_TEMT));
+ while (!(read32(&uart_ptr->lsr) & UART8250_LSR_TEMT));
}
static unsigned char rk3288_uart_rx_byte(void)
{
if (!rk3288_uart_tst_byte())
return 0;
- return readl(&uart_ptr->rbr);
+ return read32(&uart_ptr->rbr);
}
static int rk3288_uart_tst_byte(void)
{
- return (readl(&uart_ptr->lsr) & UART8250_LSR_DR) == UART8250_LSR_DR;
+ return (read32(&uart_ptr->lsr) & UART8250_LSR_DR) == UART8250_LSR_DR;
}
diff --git a/src/soc/rockchip/rk3288/vop.c b/src/soc/rockchip/rk3288/vop.c
index 378e6b8e90..915d452d4b 100644
--- a/src/soc/rockchip/rk3288/vop.c
+++ b/src/soc/rockchip/rk3288/vop.c
@@ -48,16 +48,14 @@ void rkvop_enable(u32 vop_id, u32 fbbase, const struct edid *edid)
u32 xpos = 0, ypos = 0;
struct rk3288_vop_regs *preg = vop_regs[vop_id];
- writel(V_ACT_WIDTH(hactive - 1) | V_ACT_HEIGHT(vactive - 1),
- &preg->win0_act_info);
+ write32(&preg->win0_act_info,
+ V_ACT_WIDTH(hactive - 1) | V_ACT_HEIGHT(vactive - 1));
- writel(V_DSP_XST(xpos + hsync_len + hback_porch) |
- V_DSP_YST(ypos + vsync_len + vback_porch),
- &preg->win0_dsp_st);
+ write32(&preg->win0_dsp_st,
+ V_DSP_XST(xpos + hsync_len + hback_porch) | V_DSP_YST(ypos + vsync_len + vback_porch));
- writel(V_DSP_WIDTH(hactive - 1) |
- V_DSP_HEIGHT(vactive - 1),
- &preg->win0_dsp_info);
+ write32(&preg->win0_dsp_info,
+ V_DSP_WIDTH(hactive - 1) | V_DSP_HEIGHT(vactive - 1));
clrsetbits_le32(&preg->win0_color_key, M_WIN0_KEY_EN | M_WIN0_KEY_COLOR,
V_WIN0_KEY_EN(0) |
@@ -66,19 +64,16 @@ void rkvop_enable(u32 vop_id, u32 fbbase, const struct edid *edid)
switch (edid->framebuffer_bits_per_pixel) {
case 16:
rgb_mode = RGB565;
- writel(V_RGB565_VIRWIDTH(hactive),
- &preg->win0_vir);
+ write32(&preg->win0_vir, V_RGB565_VIRWIDTH(hactive));
break;
case 24:
rgb_mode = RGB888;
- writel(V_RGB888_VIRWIDTH(hactive),
- &preg->win0_vir);
+ write32(&preg->win0_vir, V_RGB888_VIRWIDTH(hactive));
break;
case 32:
default:
rgb_mode = ARGB8888;
- writel(V_ARGB888_VIRWIDTH(hactive),
- &preg->win0_vir);
+ write32(&preg->win0_vir, V_ARGB888_VIRWIDTH(hactive));
break;
}
@@ -96,9 +91,9 @@ void rkvop_enable(u32 vop_id, u32 fbbase, const struct edid *edid)
V_WIN0_LB_MODE(lb_mode) |
V_WIN0_DATA_FMT(rgb_mode) | V_WIN0_EN(1));
- writel(fbbase, &preg->win0_yrgb_mst);
+ write32(&preg->win0_yrgb_mst, fbbase);
- writel(0x01, &preg->reg_cfg_done); /* enable reg config */
+ write32(&preg->reg_cfg_done, 0x01); /* enable reg config */
}
void rkvop_mode_set(u32 vop_id, const struct edid *edid)
@@ -116,29 +111,23 @@ void rkvop_mode_set(u32 vop_id, const struct edid *edid)
clrsetbits_le32(&preg->sys_ctrl, M_ALL_OUT_EN, V_EDP_OUT_EN(1));
clrsetbits_le32(&preg->dsp_ctrl0, M_DSP_OUT_MODE,
V_DSP_OUT_MODE(15));
- writel(V_HSYNC(hsync_len) |
- V_HORPRD(hsync_len + hback_porch + hactive + hfront_porch),
- &preg->dsp_htotal_hs_end);
+ write32(&preg->dsp_htotal_hs_end,
+ V_HSYNC(hsync_len) | V_HORPRD(hsync_len + hback_porch + hactive + hfront_porch));
- writel(V_HEAP(hsync_len + hback_porch + hactive) |
- V_HASP(hsync_len + hback_porch),
- &preg->dsp_hact_st_end);
+ write32(&preg->dsp_hact_st_end,
+ V_HEAP(hsync_len + hback_porch + hactive) | V_HASP(hsync_len + hback_porch));
- writel(V_VSYNC(vsync_len) |
- V_VERPRD(vsync_len + vback_porch + vactive + vfront_porch),
- &preg->dsp_vtotal_vs_end);
+ write32(&preg->dsp_vtotal_vs_end,
+ V_VSYNC(vsync_len) | V_VERPRD(vsync_len + vback_porch + vactive + vfront_porch));
- writel(V_VAEP(vsync_len + vback_porch + vactive)|
- V_VASP(vsync_len + vback_porch),
- &preg->dsp_vact_st_end);
+ write32(&preg->dsp_vact_st_end,
+ V_VAEP(vsync_len + vback_porch + vactive) | V_VASP(vsync_len + vback_porch));
- writel(V_HEAP(hsync_len + hback_porch + hactive) |
- V_HASP(hsync_len + hback_porch),
- &preg->post_dsp_hact_info);
+ write32(&preg->post_dsp_hact_info,
+ V_HEAP(hsync_len + hback_porch + hactive) | V_HASP(hsync_len + hback_porch));
- writel(V_VAEP(vsync_len + vback_porch + vactive)|
- V_VASP(vsync_len + vback_porch),
- &preg->post_dsp_vact_info);
+ write32(&preg->post_dsp_vact_info,
+ V_VAEP(vsync_len + vback_porch + vactive) | V_VASP(vsync_len + vback_porch));
- writel(0x01, &preg->reg_cfg_done); /* enable reg config */
+ write32(&preg->reg_cfg_done, 0x01); /* enable reg config */
}
diff --git a/src/soc/samsung/exynos5250/clock.c b/src/soc/samsung/exynos5250/clock.c
index 0986f8b9bd..89001ecf14 100644
--- a/src/soc/samsung/exynos5250/clock.c
+++ b/src/soc/samsung/exynos5250/clock.c
@@ -178,21 +178,21 @@ unsigned long get_pll_clk(int pllreg)
switch (pllreg) {
case APLL:
- r = readl(&exynos_clock->apll_con0);
+ r = read32(&exynos_clock->apll_con0);
break;
case BPLL:
- r = readl(&exynos_clock->bpll_con0);
+ r = read32(&exynos_clock->bpll_con0);
break;
case MPLL:
- r = readl(&exynos_clock->mpll_con0);
+ r = read32(&exynos_clock->mpll_con0);
break;
case EPLL:
- r = readl(&exynos_clock->epll_con0);
- k = readl(&exynos_clock->epll_con1);
+ r = read32(&exynos_clock->epll_con0);
+ k = read32(&exynos_clock->epll_con1);
break;
case VPLL:
- r = readl(&exynos_clock->vpll_con0);
- k = readl(&exynos_clock->vpll_con1);
+ r = read32(&exynos_clock->vpll_con0);
+ k = read32(&exynos_clock->vpll_con1);
break;
default:
printk(BIOS_DEBUG, "Unsupported PLL (%d)\n", pllreg);
@@ -246,41 +246,41 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
case PERIPH_ID_UART1:
case PERIPH_ID_UART2:
case PERIPH_ID_UART3:
- src = readl(&exynos_clock->src_peric0);
- div = readl(&exynos_clock->div_peric0);
+ src = read32(&exynos_clock->src_peric0);
+ div = read32(&exynos_clock->div_peric0);
break;
case PERIPH_ID_PWM0:
case PERIPH_ID_PWM1:
case PERIPH_ID_PWM2:
case PERIPH_ID_PWM3:
case PERIPH_ID_PWM4:
- src = readl(&exynos_clock->src_peric0);
- div = readl(&exynos_clock->div_peric3);
+ src = read32(&exynos_clock->src_peric0);
+ div = read32(&exynos_clock->div_peric3);
break;
case PERIPH_ID_SPI0:
case PERIPH_ID_SPI1:
- src = readl(&exynos_clock->src_peric1);
- div = readl(&exynos_clock->div_peric1);
+ src = read32(&exynos_clock->src_peric1);
+ div = read32(&exynos_clock->div_peric1);
break;
case PERIPH_ID_SPI2:
- src = readl(&exynos_clock->src_peric1);
- div = readl(&exynos_clock->div_peric2);
+ src = read32(&exynos_clock->src_peric1);
+ div = read32(&exynos_clock->div_peric2);
break;
case PERIPH_ID_SPI3:
case PERIPH_ID_SPI4:
- src = readl(&exynos_clock->sclk_src_isp);
- div = readl(&exynos_clock->sclk_div_isp);
+ src = read32(&exynos_clock->sclk_src_isp);
+ div = read32(&exynos_clock->sclk_div_isp);
break;
case PERIPH_ID_SATA:
- src = readl(&exynos_clock->src_fsys);
- div = readl(&exynos_clock->div_fsys0);
+ src = read32(&exynos_clock->src_fsys);
+ div = read32(&exynos_clock->div_fsys0);
break;
case PERIPH_ID_SDMMC0:
case PERIPH_ID_SDMMC1:
case PERIPH_ID_SDMMC2:
case PERIPH_ID_SDMMC3:
- src = readl(&exynos_clock->src_fsys);
- div = readl(&exynos_clock->div_fsys1);
+ src = read32(&exynos_clock->src_fsys);
+ div = read32(&exynos_clock->div_fsys1);
break;
case PERIPH_ID_I2C0:
case PERIPH_ID_I2C1:
@@ -291,9 +291,9 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
case PERIPH_ID_I2C6:
case PERIPH_ID_I2C7:
sclk = get_pll_clk(MPLL);
- sub_div = ((readl(&exynos_clock->div_top1)
+ sub_div = ((read32(&exynos_clock->div_top1)
>> bit_info->div_bit) & 0x7) + 1;
- div = ((readl(&exynos_clock->div_top0)
+ div = ((read32(&exynos_clock->div_top0)
>> bit_info->prediv_bit) & 0x7) + 1;
return (sclk / sub_div) / div;
default:
@@ -337,7 +337,7 @@ unsigned long get_arm_clk(void)
unsigned int arm_ratio;
unsigned int arm2_ratio;
- div = readl(&exynos_clock->div_cpu0);
+ div = read32(&exynos_clock->div_cpu0);
/* ARM_RATIO: [2:0], ARM2_RATIO: [30:28] */
arm_ratio = (div >> 0) & 0x7;
@@ -383,10 +383,10 @@ void set_mmc_clk(int dev_index, unsigned int div)
dev_index -= 2;
}
- val = readl(addr);
+ val = read32(addr);
val &= ~(0xff << ((dev_index << 4) + 8));
val |= (div & 0xff) << ((dev_index << 4) + 8);
- writel(val, addr);
+ write32(addr, val);
}
void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned divisor)
@@ -582,10 +582,10 @@ int clock_set_mshci(enum periph_id peripheral)
printk(BIOS_DEBUG, "invalid peripheral\n");
return -1;
}
- tmp = readl(addr) & ~0xff0f;
+ tmp = read32(addr) & ~0xff0f;
for (i = 0; i <= 0xf; i++) {
if ((clock / (i + 1)) <= 400) {
- writel(tmp | i << 0, addr);
+ write32(addr, tmp | i << 0);
break;
}
}
@@ -599,7 +599,7 @@ int clock_epll_set_rate(unsigned long rate)
unsigned int lockcnt;
struct stopwatch sw;
- epll_con = readl(&exynos_clock->epll_con0);
+ epll_con = read32(&exynos_clock->epll_con0);
epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK <<
EPLL_CON0_LOCK_DET_EN_SHIFT) |
EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT |
@@ -627,13 +627,13 @@ int clock_epll_set_rate(unsigned long rate)
*/
lockcnt = 3000 * epll_div[i].p_div;
- writel(lockcnt, &exynos_clock->epll_lock);
- writel(epll_con, &exynos_clock->epll_con0);
- writel(epll_con_k, &exynos_clock->epll_con1);
+ write32(&exynos_clock->epll_lock, lockcnt);
+ write32(&exynos_clock->epll_con0, epll_con);
+ write32(&exynos_clock->epll_con1, epll_con_k);
stopwatch_init_msecs_expire(&sw, TIMEOUT_EPLL_LOCK);
- while (!(readl(&exynos_clock->epll_con0) &
+ while (!(read32(&exynos_clock->epll_con0) &
(0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) {
if (stopwatch_expired(&sw)) {
printk(BIOS_DEBUG,
diff --git a/src/soc/samsung/exynos5250/clock_init.c b/src/soc/samsung/exynos5250/clock_init.c
index 409230180b..9cdd729f57 100644
--- a/src/soc/samsung/exynos5250/clock_init.c
+++ b/src/soc/samsung/exynos5250/clock_init.c
@@ -35,12 +35,12 @@ void system_clock_init(struct mem_timings *mem,
clrbits_le32(&exynos_clock->src_cpu, MUX_APLL_SEL_MASK);
do {
- val = readl(&exynos_clock->mux_stat_cpu);
+ val = read32(&exynos_clock->mux_stat_cpu);
} while ((val | MUX_APLL_SEL_MASK) != val);
clrbits_le32(&exynos_clock->src_core1, MUX_MPLL_SEL_MASK);
do {
- val = readl(&exynos_clock->mux_stat_core1);
+ val = read32(&exynos_clock->mux_stat_core1);
} while ((val | MUX_MPLL_SEL_MASK) != val);
clrbits_le32(&exynos_clock->src_top2, MUX_CPLL_SEL_MASK);
@@ -50,34 +50,34 @@ void system_clock_init(struct mem_timings *mem,
tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK
| MUX_GPLL_SEL_MASK;
do {
- val = readl(&exynos_clock->mux_stat_top2);
+ val = read32(&exynos_clock->mux_stat_top2);
} while ((val | tmp) != val);
clrbits_le32(&exynos_clock->src_cdrex, MUX_BPLL_SEL_MASK);
do {
- val = readl(&exynos_clock->mux_stat_cdrex);
+ val = read32(&exynos_clock->mux_stat_cdrex);
} while ((val | MUX_BPLL_SEL_MASK) != val);
/* PLL locktime */
- writel(APLL_LOCK_VAL, &exynos_clock->apll_lock);
+ write32(&exynos_clock->apll_lock, APLL_LOCK_VAL);
- writel(MPLL_LOCK_VAL, &exynos_clock->mpll_lock);
+ write32(&exynos_clock->mpll_lock, MPLL_LOCK_VAL);
- writel(BPLL_LOCK_VAL, &exynos_clock->bpll_lock);
+ write32(&exynos_clock->bpll_lock, BPLL_LOCK_VAL);
- writel(CPLL_LOCK_VAL, &exynos_clock->cpll_lock);
+ write32(&exynos_clock->cpll_lock, CPLL_LOCK_VAL);
- writel(GPLL_LOCK_VAL, &exynos_clock->gpll_lock);
+ write32(&exynos_clock->gpll_lock, GPLL_LOCK_VAL);
- writel(EPLL_LOCK_VAL, &exynos_clock->epll_lock);
+ write32(&exynos_clock->epll_lock, EPLL_LOCK_VAL);
- writel(VPLL_LOCK_VAL, &exynos_clock->vpll_lock);
+ write32(&exynos_clock->vpll_lock, VPLL_LOCK_VAL);
- writel(CLK_REG_DISABLE, &exynos_clock->pll_div2_sel);
+ write32(&exynos_clock->pll_div2_sel, CLK_REG_DISABLE);
- writel(MUX_HPM_SEL_MASK, &exynos_clock->src_cpu);
+ write32(&exynos_clock->src_cpu, MUX_HPM_SEL_MASK);
do {
- val = readl(&exynos_clock->mux_stat_cpu);
+ val = read32(&exynos_clock->mux_stat_cpu);
} while ((val | HPM_SEL_SCLK_MPLL) != val);
val = arm_clk_ratio->arm2_ratio << 28
@@ -88,35 +88,35 @@ void system_clock_init(struct mem_timings *mem,
| arm_clk_ratio->acp_ratio << 8
| arm_clk_ratio->cpud_ratio << 4
| arm_clk_ratio->arm_ratio;
- writel(val, &exynos_clock->div_cpu0);
+ write32(&exynos_clock->div_cpu0, val);
do {
- val = readl(&exynos_clock->div_stat_cpu0);
+ val = read32(&exynos_clock->div_stat_cpu0);
} while (0 != val);
- writel(CLK_DIV_CPU1_VAL, &exynos_clock->div_cpu1);
+ write32(&exynos_clock->div_cpu1, CLK_DIV_CPU1_VAL);
do {
- val = readl(&exynos_clock->div_stat_cpu1);
+ val = read32(&exynos_clock->div_stat_cpu1);
} while (0 != val);
/* switch A15 clock source to OSC clock before changing APLL */
clrbits_le32(&exynos_clock->src_cpu, APLL_FOUT);
/* Set APLL */
- writel(APLL_CON1_VAL, &exynos_clock->apll_con1);
+ write32(&exynos_clock->apll_con1, APLL_CON1_VAL);
val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv,
arm_clk_ratio->apll_sdiv);
- writel(val, &exynos_clock->apll_con0);
- while ((readl(&exynos_clock->apll_con0) & APLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->apll_con0, val);
+ while ((read32(&exynos_clock->apll_con0) & APLL_CON0_LOCKED) == 0)
;
/* now it is safe to switch to APLL */
setbits_le32(&exynos_clock->src_cpu, APLL_FOUT);
/* Set MPLL */
- writel(MPLL_CON1_VAL, &exynos_clock->mpll_con1);
+ write32(&exynos_clock->mpll_con1, MPLL_CON1_VAL);
val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
- writel(val, &exynos_clock->mpll_con0);
- while ((readl(&exynos_clock->mpll_con0) & MPLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->mpll_con0, val);
+ while ((read32(&exynos_clock->mpll_con0) & MPLL_CON0_LOCKED) == 0)
;
/*
@@ -127,159 +127,159 @@ void system_clock_init(struct mem_timings *mem,
/* Set BPLL */
if (mem->use_bpll) {
- writel(BPLL_CON1_VAL, &exynos_clock->bpll_con1);
+ write32(&exynos_clock->bpll_con1, BPLL_CON1_VAL);
val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
- writel(val, &exynos_clock->bpll_con0);
- while ((readl(&exynos_clock->bpll_con0) & BPLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->bpll_con0, val);
+ while ((read32(&exynos_clock->bpll_con0) & BPLL_CON0_LOCKED) == 0)
;
setbits_le32(&exynos_clock->pll_div2_sel, MUX_BPLL_FOUT_SEL);
}
/* Set CPLL */
- writel(CPLL_CON1_VAL, &exynos_clock->cpll_con1);
+ write32(&exynos_clock->cpll_con1, CPLL_CON1_VAL);
val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
- writel(val, &exynos_clock->cpll_con0);
- while ((readl(&exynos_clock->cpll_con0) & CPLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->cpll_con0, val);
+ while ((read32(&exynos_clock->cpll_con0) & CPLL_CON0_LOCKED) == 0)
;
/* Set GPLL */
- writel(GPLL_CON1_VAL, &exynos_clock->gpll_con1);
+ write32(&exynos_clock->gpll_con1, GPLL_CON1_VAL);
val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv);
- writel(val, &exynos_clock->gpll_con0);
- while ((readl(&exynos_clock->gpll_con0) & GPLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->gpll_con0, val);
+ while ((read32(&exynos_clock->gpll_con0) & GPLL_CON0_LOCKED) == 0)
;
/* Set EPLL */
- writel(EPLL_CON2_VAL, &exynos_clock->epll_con2);
- writel(EPLL_CON1_VAL, &exynos_clock->epll_con1);
+ write32(&exynos_clock->epll_con2, EPLL_CON2_VAL);
+ write32(&exynos_clock->epll_con1, EPLL_CON1_VAL);
val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
- writel(val, &exynos_clock->epll_con0);
- while ((readl(&exynos_clock->epll_con0) & EPLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->epll_con0, val);
+ while ((read32(&exynos_clock->epll_con0) & EPLL_CON0_LOCKED) == 0)
;
/* Set VPLL */
- writel(VPLL_CON2_VAL, &exynos_clock->vpll_con2);
- writel(VPLL_CON1_VAL, &exynos_clock->vpll_con1);
+ write32(&exynos_clock->vpll_con2, VPLL_CON2_VAL);
+ write32(&exynos_clock->vpll_con1, VPLL_CON1_VAL);
val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
- writel(val, &exynos_clock->vpll_con0);
- while ((readl(&exynos_clock->vpll_con0) & VPLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->vpll_con0, val);
+ while ((read32(&exynos_clock->vpll_con0) & VPLL_CON0_LOCKED) == 0)
;
- writel(CLK_SRC_CORE0_VAL, &exynos_clock->src_core0);
- writel(CLK_DIV_CORE0_VAL, &exynos_clock->div_core0);
- while (readl(&exynos_clock->div_stat_core0) != 0)
+ write32(&exynos_clock->src_core0, CLK_SRC_CORE0_VAL);
+ write32(&exynos_clock->div_core0, CLK_DIV_CORE0_VAL);
+ while (read32(&exynos_clock->div_stat_core0) != 0)
;
- writel(CLK_DIV_CORE1_VAL, &exynos_clock->div_core1);
- while (readl(&exynos_clock->div_stat_core1) != 0)
+ write32(&exynos_clock->div_core1, CLK_DIV_CORE1_VAL);
+ while (read32(&exynos_clock->div_stat_core1) != 0)
;
- writel(CLK_DIV_SYSRGT_VAL, &exynos_clock->div_sysrgt);
- while (readl(&exynos_clock->div_stat_sysrgt) != 0)
+ write32(&exynos_clock->div_sysrgt, CLK_DIV_SYSRGT_VAL);
+ while (read32(&exynos_clock->div_stat_sysrgt) != 0)
;
- writel(CLK_DIV_ACP_VAL, &exynos_clock->div_acp);
- while (readl(&exynos_clock->div_stat_acp) != 0)
+ write32(&exynos_clock->div_acp, CLK_DIV_ACP_VAL);
+ while (read32(&exynos_clock->div_stat_acp) != 0)
;
- writel(CLK_DIV_SYSLFT_VAL, &exynos_clock->div_syslft);
- while (readl(&exynos_clock->div_stat_syslft) != 0)
+ write32(&exynos_clock->div_syslft, CLK_DIV_SYSLFT_VAL);
+ while (read32(&exynos_clock->div_stat_syslft) != 0)
;
- writel(CLK_SRC_TOP0_VAL, &exynos_clock->src_top0);
- writel(CLK_SRC_TOP1_VAL, &exynos_clock->src_top1);
- writel(TOP2_VAL, &exynos_clock->src_top2);
- writel(CLK_SRC_TOP3_VAL, &exynos_clock->src_top3);
+ write32(&exynos_clock->src_top0, CLK_SRC_TOP0_VAL);
+ write32(&exynos_clock->src_top1, CLK_SRC_TOP1_VAL);
+ write32(&exynos_clock->src_top2, TOP2_VAL);
+ write32(&exynos_clock->src_top3, CLK_SRC_TOP3_VAL);
- writel(CLK_DIV_TOP0_VAL, &exynos_clock->div_top0);
- while (readl(&exynos_clock->div_stat_top0))
+ write32(&exynos_clock->div_top0, CLK_DIV_TOP0_VAL);
+ while (read32(&exynos_clock->div_stat_top0))
;
- writel(CLK_DIV_TOP1_VAL, &exynos_clock->div_top1);
- while (readl(&exynos_clock->div_stat_top1))
+ write32(&exynos_clock->div_top1, CLK_DIV_TOP1_VAL);
+ while (read32(&exynos_clock->div_stat_top1))
;
- writel(CLK_SRC_LEX_VAL, &exynos_clock->src_lex);
+ write32(&exynos_clock->src_lex, CLK_SRC_LEX_VAL);
while (1) {
- val = readl(&exynos_clock->mux_stat_lex);
+ val = read32(&exynos_clock->mux_stat_lex);
if (val == (val | 1))
break;
}
- writel(CLK_DIV_LEX_VAL, &exynos_clock->div_lex);
- while (readl(&exynos_clock->div_stat_lex))
+ write32(&exynos_clock->div_lex, CLK_DIV_LEX_VAL);
+ while (read32(&exynos_clock->div_stat_lex))
;
- writel(CLK_DIV_R0X_VAL, &exynos_clock->div_r0x);
- while (readl(&exynos_clock->div_stat_r0x))
+ write32(&exynos_clock->div_r0x, CLK_DIV_R0X_VAL);
+ while (read32(&exynos_clock->div_stat_r0x))
;
- writel(CLK_DIV_R0X_VAL, &exynos_clock->div_r0x);
- while (readl(&exynos_clock->div_stat_r0x))
+ write32(&exynos_clock->div_r0x, CLK_DIV_R0X_VAL);
+ while (read32(&exynos_clock->div_stat_r0x))
;
- writel(CLK_DIV_R1X_VAL, &exynos_clock->div_r1x);
- while (readl(&exynos_clock->div_stat_r1x))
+ write32(&exynos_clock->div_r1x, CLK_DIV_R1X_VAL);
+ while (read32(&exynos_clock->div_stat_r1x))
;
if (mem->use_bpll) {
- writel(MUX_BPLL_SEL_MASK | MUX_MCLK_CDREX_SEL |
- MUX_MCLK_DPHY_SEL, &exynos_clock->src_cdrex);
+ write32(&exynos_clock->src_cdrex,
+ MUX_BPLL_SEL_MASK | MUX_MCLK_CDREX_SEL | MUX_MCLK_DPHY_SEL);
} else {
- writel(CLK_REG_DISABLE, &exynos_clock->src_cdrex);
+ write32(&exynos_clock->src_cdrex, CLK_REG_DISABLE);
}
- writel(CLK_DIV_CDREX_VAL, &exynos_clock->div_cdrex);
- while (readl(&exynos_clock->div_stat_cdrex))
+ write32(&exynos_clock->div_cdrex, CLK_DIV_CDREX_VAL);
+ while (read32(&exynos_clock->div_stat_cdrex))
;
- val = readl(&exynos_clock->src_cpu);
+ val = read32(&exynos_clock->src_cpu);
val |= CLK_SRC_CPU_VAL;
- writel(val, &exynos_clock->src_cpu);
+ write32(&exynos_clock->src_cpu, val);
- val = readl(&exynos_clock->src_top2);
+ val = read32(&exynos_clock->src_top2);
val |= CLK_SRC_TOP2_VAL;
- writel(val, &exynos_clock->src_top2);
+ write32(&exynos_clock->src_top2, val);
- val = readl(&exynos_clock->src_core1);
+ val = read32(&exynos_clock->src_core1);
val |= CLK_SRC_CORE1_VAL;
- writel(val, &exynos_clock->src_core1);
+ write32(&exynos_clock->src_core1, val);
- writel(CLK_SRC_FSYS0_VAL, &exynos_clock->src_fsys);
- writel(CLK_DIV_FSYS0_VAL, &exynos_clock->div_fsys0);
- while (readl(&exynos_clock->div_stat_fsys0))
+ write32(&exynos_clock->src_fsys, CLK_SRC_FSYS0_VAL);
+ write32(&exynos_clock->div_fsys0, CLK_DIV_FSYS0_VAL);
+ while (read32(&exynos_clock->div_stat_fsys0))
;
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_cpu);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_core);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_acp);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_top);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_lex);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_r0x);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_r1x);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_cdrex);
-
- writel(CLK_SRC_PERIC0_VAL, &exynos_clock->src_peric0);
- writel(CLK_DIV_PERIC0_VAL, &exynos_clock->div_peric0);
-
- writel(CLK_SRC_PERIC1_VAL, &exynos_clock->src_peric1);
- writel(CLK_DIV_PERIC1_VAL, &exynos_clock->div_peric1);
- writel(CLK_DIV_PERIC2_VAL, &exynos_clock->div_peric2);
- writel(SCLK_SRC_ISP_VAL, &exynos_clock->sclk_src_isp);
- writel(SCLK_DIV_ISP_VAL, &exynos_clock->sclk_div_isp);
- writel(CLK_DIV_ISP0_VAL, &exynos_clock->div_isp0);
- writel(CLK_DIV_ISP1_VAL, &exynos_clock->div_isp1);
- writel(CLK_DIV_ISP2_VAL, &exynos_clock->div_isp2);
+ write32(&exynos_clock->clkout_cmu_cpu, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_core, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_acp, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_top, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_lex, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_r0x, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_r1x, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_cdrex, CLK_REG_DISABLE);
+
+ write32(&exynos_clock->src_peric0, CLK_SRC_PERIC0_VAL);
+ write32(&exynos_clock->div_peric0, CLK_DIV_PERIC0_VAL);
+
+ write32(&exynos_clock->src_peric1, CLK_SRC_PERIC1_VAL);
+ write32(&exynos_clock->div_peric1, CLK_DIV_PERIC1_VAL);
+ write32(&exynos_clock->div_peric2, CLK_DIV_PERIC2_VAL);
+ write32(&exynos_clock->sclk_src_isp, SCLK_SRC_ISP_VAL);
+ write32(&exynos_clock->sclk_div_isp, SCLK_DIV_ISP_VAL);
+ write32(&exynos_clock->div_isp0, CLK_DIV_ISP0_VAL);
+ write32(&exynos_clock->div_isp1, CLK_DIV_ISP1_VAL);
+ write32(&exynos_clock->div_isp2, CLK_DIV_ISP2_VAL);
/* FIMD1 SRC CLK SELECTION */
- writel(CLK_SRC_DISP1_0_VAL, &exynos_clock->src_disp1_0);
+ write32(&exynos_clock->src_disp1_0, CLK_SRC_DISP1_0_VAL);
val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET
| MMC2_RATIO_VAL << MMC2_RATIO_OFFSET
| MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET
| MMC3_RATIO_VAL << MMC3_RATIO_OFFSET;
- writel(val, &exynos_clock->div_fsys2);
+ write32(&exynos_clock->div_fsys2, val);
}
void clock_gate(void)
diff --git a/src/soc/samsung/exynos5250/cpu.c b/src/soc/samsung/exynos5250/cpu.c
index cff1466a64..d9f001a57f 100644
--- a/src/soc/samsung/exynos5250/cpu.c
+++ b/src/soc/samsung/exynos5250/cpu.c
@@ -38,7 +38,7 @@ static unsigned int cpu_rev;
static void set_cpu_id(void)
{
- cpu_id = readl((void *)EXYNOS5_PRO_ID);
+ cpu_id = read32((void *)EXYNOS5_PRO_ID);
cpu_id = (0xC000 | ((cpu_id & 0x00FFF000) >> 12));
/*
diff --git a/src/soc/samsung/exynos5250/dmc_common.c b/src/soc/samsung/exynos5250/dmc_common.c
index 17dff1ec92..2e64905d9d 100644
--- a/src/soc/samsung/exynos5250/dmc_common.c
+++ b/src/soc/samsung/exynos5250/dmc_common.c
@@ -45,19 +45,19 @@ int dmc_config_zq(struct mem_timings *mem,
val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT;
val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT;
val |= ZQ_CLK_DIV_EN;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* Disable termination */
if (mem->zq_mode_noterm)
val |= PHY_CON16_ZQ_MODE_NOTERM_MASK;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* ZQ_MANUAL_START: Enable */
val |= ZQ_MANUAL_STR;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* ZQ_MANUAL_START: Disable */
val &= ~ZQ_MANUAL_STR;
@@ -67,22 +67,22 @@ int dmc_config_zq(struct mem_timings *mem,
* we are looping for the ZQ_init to complete.
*/
i = ZQ_INIT_TIMEOUT;
- while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+ while ((read32(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
udelay(1);
i--;
}
if (!i)
return -1;
- writel(val, &phy0_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
i = ZQ_INIT_TIMEOUT;
- while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+ while ((read32(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
udelay(1);
i--;
}
if (!i)
return -1;
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy1_ctrl->phy_con16, val);
return 0;
}
@@ -93,18 +93,18 @@ void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode)
if (mode == DDR_MODE_DDR3) {
val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
}
/* Update DLL Information: Force DLL Resynchronization */
- val = readl(&dmc->phycontrol0);
+ val = read32(&dmc->phycontrol0);
val |= FP_RSYNC;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
/* Reset Force DLL Resynchronization */
- val = readl(&dmc->phycontrol0);
+ val = read32(&dmc->phycontrol0);
val &= ~FP_RSYNC;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
}
void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
@@ -121,7 +121,7 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
mask |= chip << DIRECT_CMD_CHIP_SHIFT;
/* Sending NOP command */
- writel(DIRECT_CMD_NOP | mask, &dmc->directcmd);
+ write32(&dmc->directcmd, DIRECT_CMD_NOP | mask);
/*
* TODO(alim.akhtar@samsung.com): Do we need these
@@ -132,15 +132,15 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
/* Sending EMRS/MRS commands */
for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
- writel(mem->direct_cmd_msr[i] | mask,
- &dmc->directcmd);
+ write32(&dmc->directcmd,
+ mem->direct_cmd_msr[i] | mask);
udelay(100);
}
if (mem->send_zq_init) {
/* Sending ZQINIT command */
- writel(DIRECT_CMD_ZQINIT | mask,
- &dmc->directcmd);
+ write32(&dmc->directcmd,
+ DIRECT_CMD_ZQINIT | mask);
/*
* FIXME: This was originally sdelay(10000)
* in the imported u-boot code. That may have
@@ -166,7 +166,7 @@ void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc)
mask |= chip << DIRECT_CMD_CHIP_SHIFT;
/* PALL (all banks precharge) CMD */
- writel(DIRECT_CMD_PALL | mask, &dmc->directcmd);
+ write32(&dmc->directcmd, DIRECT_CMD_PALL | mask);
udelay(100);
}
}
@@ -174,8 +174,8 @@ void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc)
void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc)
{
- writel(mem->memconfig, &dmc->memconfig0);
- writel(mem->memconfig, &dmc->memconfig1);
- writel(DMC_MEMBASECONFIG0_VAL, &dmc->membaseconfig0);
- writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1);
+ write32(&dmc->memconfig0, mem->memconfig);
+ write32(&dmc->memconfig1, mem->memconfig);
+ write32(&dmc->membaseconfig0, DMC_MEMBASECONFIG0_VAL);
+ write32(&dmc->membaseconfig1, DMC_MEMBASECONFIG1_VAL);
}
diff --git a/src/soc/samsung/exynos5250/dmc_init_ddr3.c b/src/soc/samsung/exynos5250/dmc_init_ddr3.c
index 3b26c206c1..5a3cf3ef06 100644
--- a/src/soc/samsung/exynos5250/dmc_init_ddr3.c
+++ b/src/soc/samsung/exynos5250/dmc_init_ddr3.c
@@ -31,8 +31,10 @@
static void reset_phy_ctrl(void)
{
- writel(LPDDR3PHY_CTRL_PHY_RESET_ENABLE, &exynos_clock->lpddr3phy_ctrl);
- writel(LPDDR3PHY_CTRL_PHY_RESET_DISABLE, &exynos_clock->lpddr3phy_ctrl);
+ write32(&exynos_clock->lpddr3phy_ctrl,
+ LPDDR3PHY_CTRL_PHY_RESET_ENABLE);
+ write32(&exynos_clock->lpddr3phy_ctrl,
+ LPDDR3PHY_CTRL_PHY_RESET_DISABLE);
#if 0
/*
@@ -65,14 +67,14 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
(mem->impedance << CA_CKE_DRVR_DS_OFFSET) |
(mem->impedance << CA_CS_DRVR_DS_OFFSET) |
(mem->impedance << CA_ADR_DRVR_DS_OFFSET);
- writel(val, &exynos_phy0_control->phy_con39);
- writel(val, &exynos_phy1_control->phy_con39);
+ write32(&exynos_phy0_control->phy_con39, val);
+ write32(&exynos_phy1_control->phy_con39, val);
/* Set Read Latency and Burst Length for PHY0 and PHY1 */
val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
- writel(val, &exynos_phy0_control->phy_con42);
- writel(val, &exynos_phy1_control->phy_con42);
+ write32(&exynos_phy0_control->phy_con42, val);
+ write32(&exynos_phy1_control->phy_con42, val);
/* ZQ Calibration */
if (dmc_config_zq(mem, exynos_phy0_control, exynos_phy1_control)){
@@ -81,71 +83,69 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
}
/* DQ Signal */
- writel(mem->phy0_pulld_dqs, &exynos_phy0_control->phy_con14);
- writel(mem->phy1_pulld_dqs, &exynos_phy1_control->phy_con14);
+ write32(&exynos_phy0_control->phy_con14, mem->phy0_pulld_dqs);
+ write32(&exynos_phy1_control->phy_con14, mem->phy1_pulld_dqs);
- writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)
- | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT),
- &exynos_dmc->concontrol);
+ write32(&exynos_dmc->concontrol,
+ mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT));
update_reset_dll(exynos_dmc, DDR_MODE_DDR3);
/* DQS Signal */
- writel(mem->phy0_dqs, &exynos_phy0_control->phy_con4);
- writel(mem->phy1_dqs, &exynos_phy1_control->phy_con4);
+ write32(&exynos_phy0_control->phy_con4, mem->phy0_dqs);
+ write32(&exynos_phy1_control->phy_con4, mem->phy1_dqs);
- writel(mem->phy0_dq, &exynos_phy0_control->phy_con6);
- writel(mem->phy1_dq, &exynos_phy1_control->phy_con6);
+ write32(&exynos_phy0_control->phy_con6, mem->phy0_dq);
+ write32(&exynos_phy1_control->phy_con6, mem->phy1_dq);
- writel(mem->phy0_tFS, &exynos_phy0_control->phy_con10);
- writel(mem->phy1_tFS, &exynos_phy1_control->phy_con10);
+ write32(&exynos_phy0_control->phy_con10, mem->phy0_tFS);
+ write32(&exynos_phy1_control->phy_con10, mem->phy1_tFS);
val = (mem->ctrl_start_point << PHY_CON12_CTRL_START_POINT_SHIFT) |
(mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
(mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) |
(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
- writel(val, &exynos_phy0_control->phy_con12);
- writel(val, &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12, val);
+ write32(&exynos_phy1_control->phy_con12, val);
/* Start DLL locking */
- writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
- &exynos_phy0_control->phy_con12);
- writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
- &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12,
+ val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT));
+ write32(&exynos_phy1_control->phy_con12,
+ val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT));
update_reset_dll(exynos_dmc, DDR_MODE_DDR3);
- writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
- &exynos_dmc->concontrol);
+ write32(&exynos_dmc->concontrol,
+ mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT));
/* Memory Channel Inteleaving Size */
- writel(mem->iv_size, &exynos_dmc->ivcontrol);
+ write32(&exynos_dmc->ivcontrol, mem->iv_size);
/* Set DMC MEMCONTROL register */
val = mem->memcontrol & ~DMC_MEMCONTROL_DSREF_ENABLE;
- writel(val, &exynos_dmc->memcontrol);
+ write32(&exynos_dmc->memcontrol, val);
- writel(mem->memconfig, &exynos_dmc->memconfig0);
- writel(mem->memconfig, &exynos_dmc->memconfig1);
- writel(mem->membaseconfig0, &exynos_dmc->membaseconfig0);
- writel(mem->membaseconfig1, &exynos_dmc->membaseconfig1);
+ write32(&exynos_dmc->memconfig0, mem->memconfig);
+ write32(&exynos_dmc->memconfig1, mem->memconfig);
+ write32(&exynos_dmc->membaseconfig0, mem->membaseconfig0);
+ write32(&exynos_dmc->membaseconfig1, mem->membaseconfig1);
/* Precharge Configuration */
- writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
- &exynos_dmc->prechconfig);
+ write32(&exynos_dmc->prechconfig,
+ mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT);
/* Power Down mode Configuration */
- writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT |
- mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT,
- &exynos_dmc->pwrdnconfig);
+ write32(&exynos_dmc->pwrdnconfig,
+ mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT | mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT);
/* TimingRow, TimingData, TimingPower and Timingaref
* values as per Memory AC parameters
*/
- writel(mem->timing_ref, &exynos_dmc->timingref);
- writel(mem->timing_row, &exynos_dmc->timingrow);
- writel(mem->timing_data, &exynos_dmc->timingdata);
- writel(mem->timing_power, &exynos_dmc->timingpower);
+ write32(&exynos_dmc->timingref, mem->timing_ref);
+ write32(&exynos_dmc->timingrow, mem->timing_row);
+ write32(&exynos_dmc->timingdata, mem->timing_data);
+ write32(&exynos_dmc->timingpower, mem->timing_power);
/* Send PALL command */
dmc_config_prech(mem, exynos_dmc);
@@ -162,19 +162,19 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
if (mem->gate_leveling_enable) {
val = PHY_CON0_RESET_VAL;
val |= P0_CMD_EN;
- writel(val, &exynos_phy0_control->phy_con0);
- writel(val, &exynos_phy1_control->phy_con0);
+ write32(&exynos_phy0_control->phy_con0, val);
+ write32(&exynos_phy1_control->phy_con0, val);
val = PHY_CON2_RESET_VAL;
val |= INIT_DESKEW_EN;
- writel(val, &exynos_phy0_control->phy_con2);
- writel(val, &exynos_phy1_control->phy_con2);
+ write32(&exynos_phy0_control->phy_con2, val);
+ write32(&exynos_phy1_control->phy_con2, val);
val = PHY_CON0_RESET_VAL;
val |= P0_CMD_EN;
val |= BYTE_RDLVL_EN;
- writel(val, &exynos_phy0_control->phy_con0);
- writel(val, &exynos_phy1_control->phy_con0);
+ write32(&exynos_phy0_control->phy_con0, val);
+ write32(&exynos_phy1_control->phy_con0, val);
val = (mem->ctrl_start_point <<
PHY_CON12_CTRL_START_POINT_SHIFT) |
@@ -182,30 +182,30 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
(mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) |
(mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) |
(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
- writel(val, &exynos_phy0_control->phy_con12);
- writel(val, &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12, val);
+ write32(&exynos_phy1_control->phy_con12, val);
val = PHY_CON2_RESET_VAL;
val |= INIT_DESKEW_EN;
val |= RDLVL_GATE_EN;
- writel(val, &exynos_phy0_control->phy_con2);
- writel(val, &exynos_phy1_control->phy_con2);
+ write32(&exynos_phy0_control->phy_con2, val);
+ write32(&exynos_phy1_control->phy_con2, val);
val = PHY_CON0_RESET_VAL;
val |= P0_CMD_EN;
val |= BYTE_RDLVL_EN;
val |= CTRL_SHGATE;
- writel(val, &exynos_phy0_control->phy_con0);
- writel(val, &exynos_phy1_control->phy_con0);
+ write32(&exynos_phy0_control->phy_con0, val);
+ write32(&exynos_phy1_control->phy_con0, val);
val = PHY_CON1_RESET_VAL;
val &= ~(CTRL_GATEDURADJ_MASK);
- writel(val, &exynos_phy0_control->phy_con1);
- writel(val, &exynos_phy1_control->phy_con1);
+ write32(&exynos_phy0_control->phy_con1, val);
+ write32(&exynos_phy1_control->phy_con1, val);
- writel(CTRL_RDLVL_GATE_ENABLE, &exynos_dmc->rdlvl_config);
+ write32(&exynos_dmc->rdlvl_config, CTRL_RDLVL_GATE_ENABLE);
i = RDLVL_COMPLETE_TIMEOUT;
- while ((readl(&exynos_dmc->phystatus) &
+ while ((read32(&exynos_dmc->phystatus) &
(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) !=
(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) {
/*
@@ -219,10 +219,10 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
printk(BIOS_EMERG, "Timeout on RDLVL. No DRAM.\n");
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
}
- writel(CTRL_RDLVL_GATE_DISABLE, &exynos_dmc->rdlvl_config);
+ write32(&exynos_dmc->rdlvl_config, CTRL_RDLVL_GATE_DISABLE);
- writel(0, &exynos_phy0_control->phy_con14);
- writel(0, &exynos_phy1_control->phy_con14);
+ write32(&exynos_phy0_control->phy_con14, 0);
+ write32(&exynos_phy1_control->phy_con14, 0);
val = (mem->ctrl_start_point <<
PHY_CON12_CTRL_START_POINT_SHIFT) |
@@ -231,8 +231,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
(mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) |
(mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) |
(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
- writel(val, &exynos_phy0_control->phy_con12);
- writel(val, &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12, val);
+ write32(&exynos_phy1_control->phy_con12, val);
update_reset_dll(exynos_dmc, DDR_MODE_DDR3);
}
@@ -240,11 +240,10 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
/* Send PALL command */
dmc_config_prech(mem, exynos_dmc);
- writel(mem->memcontrol, &exynos_dmc->memcontrol);
+ write32(&exynos_dmc->memcontrol, mem->memcontrol);
/* Set DMC Concontrol and enable auto-refresh counter */
- writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)
- | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT),
- &exynos_dmc->concontrol);
+ write32(&exynos_dmc->concontrol,
+ mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT));
return 0;
}
diff --git a/src/soc/samsung/exynos5250/dp-reg.c b/src/soc/samsung/exynos5250/dp-reg.c
index a2c0aa482d..75dadba022 100644
--- a/src/soc/samsung/exynos5250/dp-reg.c
+++ b/src/soc/samsung/exynos5250/dp-reg.c
@@ -35,7 +35,7 @@ void s5p_dp_reset(struct s5p_dp_device *dp)
u32 reg;
struct exynos5_dp *base = dp->base;
- writel(RESET_DP_TX, &base->dp_tx_sw_reset);
+ write32(&base->dp_tx_sw_reset, RESET_DP_TX);
/* Stop Video */
clrbits_le32(&base->video_ctl_1, VIDEO_EN);
@@ -44,73 +44,73 @@ void s5p_dp_reset(struct s5p_dp_device *dp)
reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
HDCP_FUNC_EN_N | SW_FUNC_EN_N;
- writel(reg, &base->func_en_1);
+ write32(&base->func_en_1, reg);
reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N |
SERDES_FIFO_FUNC_EN_N |
LS_CLK_DOMAIN_FUNC_EN_N;
- writel(reg, &base->func_en_2);
+ write32(&base->func_en_2, reg);
udelay(20);
reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
- writel(reg, &base->lane_map);
+ write32(&base->lane_map, reg);
- writel(0x0, &base->sys_ctl_1);
- writel(0x40, &base->sys_ctl_2);
- writel(0x0, &base->sys_ctl_3);
- writel(0x0, &base->sys_ctl_4);
+ write32(&base->sys_ctl_1, 0x0);
+ write32(&base->sys_ctl_2, 0x40);
+ write32(&base->sys_ctl_3, 0x0);
+ write32(&base->sys_ctl_4, 0x0);
- writel(0x0, &base->pkt_send_ctl);
- writel(0x0, &base->dp_hdcp_ctl);
+ write32(&base->pkt_send_ctl, 0x0);
+ write32(&base->dp_hdcp_ctl, 0x0);
- writel(0x5e, &base->dp_hpd_deglitch_l);
- writel(0x1a, &base->dp_hpd_deglitch_h);
+ write32(&base->dp_hpd_deglitch_l, 0x5e);
+ write32(&base->dp_hpd_deglitch_h, 0x1a);
- writel(0x10, &base->dp_debug_ctl);
+ write32(&base->dp_debug_ctl, 0x10);
- writel(0x0, &base->dp_phy_test);
+ write32(&base->dp_phy_test, 0x0);
- writel(0x0, &base->dp_video_fifo_thrd);
- writel(0x20, &base->dp_audio_margin);
+ write32(&base->dp_video_fifo_thrd, 0x0);
+ write32(&base->dp_audio_margin, 0x20);
- writel(0x4, &base->m_vid_gen_filter_th);
- writel(0x2, &base->m_aud_gen_filter_th);
+ write32(&base->m_vid_gen_filter_th, 0x4);
+ write32(&base->m_aud_gen_filter_th, 0x2);
- writel(0x00000101, &base->soc_general_ctl);
+ write32(&base->soc_general_ctl, 0x00000101);
/* Set Analog Parameters */
- writel(0x10, &base->analog_ctl_1);
- writel(0x0C, &base->analog_ctl_2);
- writel(0x85, &base->analog_ctl_3);
- writel(0x66, &base->pll_filter_ctl_1);
- writel(0x0, &base->tx_amp_tuning_ctl);
+ write32(&base->analog_ctl_1, 0x10);
+ write32(&base->analog_ctl_2, 0x0C);
+ write32(&base->analog_ctl_3, 0x85);
+ write32(&base->pll_filter_ctl_1, 0x66);
+ write32(&base->tx_amp_tuning_ctl, 0x0);
/* Set interrupt pin assertion polarity as high */
- writel(INT_POL0 | INT_POL1, &base->int_ctl);
+ write32(&base->int_ctl, INT_POL0 | INT_POL1);
/* Clear pending registers */
- writel(0xff, &base->common_int_sta_1);
- writel(0x4f, &base->common_int_sta_2);
- writel(0xe0, &base->common_int_sta_3);
- writel(0xe7, &base->common_int_sta_4);
- writel(0x63, &base->dp_int_sta);
+ write32(&base->common_int_sta_1, 0xff);
+ write32(&base->common_int_sta_2, 0x4f);
+ write32(&base->common_int_sta_3, 0xe0);
+ write32(&base->common_int_sta_4, 0xe7);
+ write32(&base->dp_int_sta, 0x63);
/* 0:mask,1: unmask */
- writel(0x00, &base->common_int_mask_1);
- writel(0x00, &base->common_int_mask_2);
- writel(0x00, &base->common_int_mask_3);
- writel(0x00, &base->common_int_mask_4);
- writel(0x00, &base->int_sta_mask);
+ write32(&base->common_int_mask_1, 0x00);
+ write32(&base->common_int_mask_2, 0x00);
+ write32(&base->common_int_mask_3, 0x00);
+ write32(&base->common_int_mask_4, 0x00);
+ write32(&base->int_sta_mask, 0x00);
}
unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp)
{
u32 reg;
- reg = readl(&dp->base->dp_debug_ctl);
+ reg = read32(&dp->base->dp_debug_ctl);
if (reg & PLL_LOCK)
return PLL_LOCKED;
else
@@ -123,10 +123,10 @@ int s5p_dp_init_analog_func(struct s5p_dp_device *dp)
struct stopwatch sw;
struct exynos5_dp *base = dp->base;
- writel(0x00, &base->dp_phy_pd);
+ write32(&base->dp_phy_pd, 0x00);
reg = PLL_LOCK_CHG;
- writel(reg, &base->common_int_sta_1);
+ write32(&base->common_int_sta_1, reg);
clrbits_le32(&base->dp_debug_ctl, (F_PLL_LOCK | PLL_LOCK_CTRL));
@@ -159,7 +159,7 @@ void s5p_dp_init_aux(struct s5p_dp_device *dp)
/* Clear interrupts related to AUX channel */
reg = RPLY_RECEIV | AUX_ERR;
- writel(reg, &base->dp_int_sta);
+ write32(&base->dp_int_sta, reg);
/* Disable AUX channel module */
setbits_le32(&base->func_en_2, AUX_FUNC_EN_N);
@@ -168,12 +168,12 @@ void s5p_dp_init_aux(struct s5p_dp_device *dp)
reg = (3 & AUX_BIT_PERIOD_MASK) << AUX_BIT_PERIOD_SHIFT;
reg |= (0 & AUX_HW_RETRY_COUNT_MASK) << AUX_HW_RETRY_COUNT_SHIFT;
reg |= (AUX_HW_RETRY_INTERVAL_600_US << AUX_HW_RETRY_INTERVAL_SHIFT);
- writel(reg, &base->aux_hw_retry_ctl) ;
+ write32(&base->aux_hw_retry_ctl, reg);
/* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
reg = DEFER_CTRL_EN;
reg |= (1 & DEFER_COUNT_MASK) << DEFER_COUNT_SHIFT;
- writel(reg, &base->aux_ch_defer_dtl);
+ write32(&base->aux_ch_defer_dtl, reg);
/* Enable AUX channel module */
clrbits_le32(&base->func_en_2, AUX_FUNC_EN_N);
@@ -188,24 +188,24 @@ int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp)
setbits_le32(&base->aux_ch_ctl_2, AUX_EN);
/* Is AUX CH command reply received? */
- reg = readl(&base->dp_int_sta);
+ reg = read32(&base->dp_int_sta);
while (!(reg & RPLY_RECEIV))
- reg = readl(&base->dp_int_sta);
+ reg = read32(&base->dp_int_sta);
/* Clear interrupt source for AUX CH command reply */
- writel(RPLY_RECEIV, &base->dp_int_sta);
+ write32(&base->dp_int_sta, RPLY_RECEIV);
/* Clear interrupt source for AUX CH access error */
- reg = readl(&base->dp_int_sta);
+ reg = read32(&base->dp_int_sta);
if (reg & AUX_ERR) {
printk(BIOS_ERR, "%s: AUX_ERR encountered, dp_int_sta: "
"0x%02x\n", __func__, reg);
- writel(AUX_ERR, &base->dp_int_sta);
+ write32(&base->dp_int_sta, AUX_ERR);
return -1;
}
/* Check AUX CH error access status */
- reg = readl(&base->dp_int_sta);
+ reg = read32(&base->dp_int_sta);
if ((reg & AUX_STATUS_MASK) != 0) {
printk(BIOS_ERR, "AUX CH error happens: %d\n\n",
reg & AUX_STATUS_MASK);
@@ -226,22 +226,22 @@ int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp,
for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) {
/* Clear AUX CH data buffer */
- writel(BUF_CLR, &base->buf_data_ctl);
+ write32(&base->buf_data_ctl, BUF_CLR);
/* Select DPCD device address */
reg = reg_addr >> AUX_ADDR_7_0_SHIFT;
reg &= AUX_ADDR_7_0_MASK;
- writel(reg, &base->aux_addr_7_0);
+ write32(&base->aux_addr_7_0, reg);
reg = reg_addr >> AUX_ADDR_15_8_SHIFT;
reg &= AUX_ADDR_15_8_MASK;
- writel(reg, &base->aux_addr_15_8);
+ write32(&base->aux_addr_15_8, reg);
reg = reg_addr >> AUX_ADDR_19_16_SHIFT;
reg &= AUX_ADDR_19_16_MASK;
- writel(reg, &base->aux_addr_19_16);
+ write32(&base->aux_addr_19_16, reg);
/* Write data buffer */
reg = (unsigned int)data;
- writel(reg, &base->buf_data_0);
+ write32(&base->buf_data_0, reg);
/*
* Set DisplayPort transaction and write 1 byte
@@ -249,7 +249,7 @@ int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp,
* If Bit 3 is 0, I2C transaction.
*/
reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
- writel(reg, &base->aux_ch_ctl_1);
+ write32(&base->aux_ch_ctl_1, reg);
/* Start AUX transaction */
retval = s5p_dp_start_aux_transaction(dp);
@@ -273,18 +273,18 @@ int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp,
for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) {
/* Clear AUX CH data buffer */
- writel(BUF_CLR, &base->buf_data_ctl);
+ write32(&base->buf_data_ctl, BUF_CLR);
/* Select DPCD device address */
reg = reg_addr >> AUX_ADDR_7_0_SHIFT;
reg &= AUX_ADDR_7_0_MASK;
- writel(reg, &base->aux_addr_7_0);
+ write32(&base->aux_addr_7_0, reg);
reg = reg_addr >> AUX_ADDR_15_8_SHIFT;
reg &= AUX_ADDR_15_8_MASK;
- writel(reg, &base->aux_addr_15_8);
+ write32(&base->aux_addr_15_8, reg);
reg = reg_addr >> AUX_ADDR_19_16_SHIFT;
reg &= AUX_ADDR_19_16_MASK;
- writel(reg, &base->aux_addr_19_16);
+ write32(&base->aux_addr_19_16, reg);
/*
* Set DisplayPort transaction and read 1 byte
@@ -292,7 +292,7 @@ int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp,
* If Bit 3 is 0, I2C transaction.
*/
reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
- writel(reg, &base->aux_ch_ctl_1);
+ write32(&base->aux_ch_ctl_1, reg);
/* Start AUX transaction */
retval = s5p_dp_start_aux_transaction(dp);
@@ -304,7 +304,7 @@ int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp,
/* Read data buffer */
if (!retval) {
- reg = readl(&base->buf_data_0);
+ reg = read32(&base->buf_data_0);
*data = (unsigned char)(reg & 0xff);
}
@@ -317,17 +317,17 @@ void s5p_dp_init_video(struct s5p_dp_device *dp)
struct exynos5_dp *base = dp->base;
reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
- writel(reg, &base->common_int_sta_1);
+ write32(&base->common_int_sta_1, reg);
reg = 0x0;
- writel(reg, &base->sys_ctl_1);
+ write32(&base->sys_ctl_1, reg);
reg = (4 & CHA_CRI_MASK) << CHA_CRI_SHIFT;
reg |= CHA_CTRL;
- writel(reg, &base->sys_ctl_2);
+ write32(&base->sys_ctl_2, reg);
reg = 0x0;
- writel(reg, &base->sys_ctl_3);
+ write32(&base->sys_ctl_3, reg);
}
void s5p_dp_set_video_color_format(struct s5p_dp_device *dp,
@@ -343,16 +343,16 @@ void s5p_dp_set_video_color_format(struct s5p_dp_device *dp,
reg = (dynamic_range << IN_D_RANGE_SHIFT) |
(color_depth << IN_BPC_SHIFT) |
(color_space << IN_COLOR_F_SHIFT);
- writel(reg, &base->video_ctl_2);
+ write32(&base->video_ctl_2, reg);
/* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
- reg = readl(&base->video_ctl_3);
+ reg = read32(&base->video_ctl_3);
reg &= ~IN_YC_COEFFI_MASK;
if (coeff)
reg |= IN_YC_COEFFI_ITU709;
else
reg |= IN_YC_COEFFI_ITU601;
- writel(reg, &base->video_ctl_3);
+ write32(&base->video_ctl_3, reg);
}
int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp)
@@ -360,18 +360,18 @@ int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp)
u32 reg;
struct exynos5_dp *base = dp->base;
- reg = readl(&base->sys_ctl_1);
- writel(reg, &base->sys_ctl_1);
+ reg = read32(&base->sys_ctl_1);
+ write32(&base->sys_ctl_1, reg);
- reg = readl(&base->sys_ctl_1);
+ reg = read32(&base->sys_ctl_1);
if (!(reg & DET_STA))
return -1;
- reg = readl(&base->sys_ctl_2);
- writel(reg, &base->sys_ctl_2);
+ reg = read32(&base->sys_ctl_2);
+ write32(&base->sys_ctl_2, reg);
- reg = readl(&base->sys_ctl_2);
+ reg = read32(&base->sys_ctl_2);
if (reg & CHA_STA) {
printk(BIOS_DEBUG, "Input stream clk is changing\n");
@@ -393,28 +393,28 @@ void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp,
setbits_le32(&base->sys_ctl_4, FIX_M_VID);
reg = m_value >> M_VID_0_VALUE_SHIFT;
- writel(reg, &base->m_vid_0);
+ write32(&base->m_vid_0, reg);
reg = (m_value >> M_VID_1_VALUE_SHIFT);
- writel(reg, &base->m_vid_1);
+ write32(&base->m_vid_1, reg);
reg = (m_value >> M_VID_2_VALUE_SHIFT);
- writel(reg, &base->m_vid_2);
+ write32(&base->m_vid_2, reg);
reg = n_value >> N_VID_0_VALUE_SHIFT;
- writel(reg, &base->n_vid_0);
+ write32(&base->n_vid_0, reg);
reg = (n_value >> N_VID_1_VALUE_SHIFT);
- writel(reg, &base->n_vid_1);
+ write32(&base->n_vid_1, reg);
reg = (n_value >> N_VID_2_VALUE_SHIFT);
- writel(reg, &base->n_vid_2);
+ write32(&base->n_vid_2, reg);
} else {
clrbits_le32(&base->sys_ctl_4, FIX_M_VID);
- writel(0x00, &base->n_vid_0);
- writel(0x80, &base->n_vid_1);
- writel(0x00, &base->n_vid_2);
+ write32(&base->n_vid_0, 0x00);
+ write32(&base->n_vid_1, 0x80);
+ write32(&base->n_vid_2, 0x00);
}
}
@@ -423,10 +423,10 @@ void s5p_dp_enable_video_master(struct s5p_dp_device *dp)
u32 reg;
struct exynos5_dp *base = dp->base;
- reg = readl(&base->soc_general_ctl);
+ reg = read32(&base->soc_general_ctl);
reg &= ~VIDEO_MODE_MASK;
reg |= VIDEO_MODE_SLAVE_MODE;
- writel(reg, &base->soc_general_ctl);
+ write32(&base->soc_general_ctl, reg);
}
int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp)
@@ -439,10 +439,10 @@ int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp)
stopwatch_init_msecs_expire(&sw, STREAM_ON_TIMEOUT);
do {
- reg = readl(&base->common_int_sta_1);
+ reg = read32(&base->common_int_sta_1);
if (reg & VSYNC_DET) {
i++;
- writel(reg | VSYNC_DET, &base->common_int_sta_1);
+ write32(&base->common_int_sta_1, reg | VSYNC_DET);
}
if (i == 4)
break;
@@ -462,28 +462,28 @@ void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp,
u32 reg;
struct exynos5_dp *base = dp->base;
- reg = readl(&base->func_en_1);
+ reg = read32(&base->func_en_1);
reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N);
reg |= MASTER_VID_FUNC_EN_N;
- writel(reg, &base->func_en_1);
+ write32(&base->func_en_1, reg);
- reg = readl(&base->video_ctl_10);
+ reg = read32(&base->video_ctl_10);
reg &= ~INTERACE_SCAN_CFG;
reg |= (video_info->interlaced << 2);
- writel(reg, &base->video_ctl_10);
+ write32(&base->video_ctl_10, reg);
- reg = readl(&base->video_ctl_10);
+ reg = read32(&base->video_ctl_10);
reg &= ~VSYNC_POLARITY_CFG;
reg |= (video_info->v_sync_polarity << 1);
- writel(reg, &base->video_ctl_10);
+ write32(&base->video_ctl_10, reg);
- reg = readl(&base->video_ctl_10);
+ reg = read32(&base->video_ctl_10);
reg &= ~HSYNC_POLARITY_CFG;
reg |= (video_info->h_sync_polarity << 0);
- writel(reg, &base->video_ctl_10);
+ write32(&base->video_ctl_10, reg);
reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
- writel(reg, &base->soc_general_ctl);
+ write32(&base->soc_general_ctl, reg);
}
void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp)
@@ -491,7 +491,7 @@ void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp)
u32 reg;
struct exynos5_dp *base = dp->base;
- reg = readl(&base->dp_hw_link_training);
+ reg = read32(&base->dp_hw_link_training);
while (reg & HW_TRAINING_EN)
- reg = readl(&base->dp_hw_link_training);
+ reg = read32(&base->dp_hw_link_training);
}
diff --git a/src/soc/samsung/exynos5250/fb.c b/src/soc/samsung/exynos5250/fb.c
index 3c7c5ef27b..befb0debf0 100644
--- a/src/soc/samsung/exynos5250/fb.c
+++ b/src/soc/samsung/exynos5250/fb.c
@@ -122,48 +122,48 @@ void fb_init(unsigned long int fb_size, void *lcdbase,
fb_size = ALIGN(fb_size, 4096);
- writel(pd->ivclk | pd->fixvclk, &exynos_disp_ctrl->vidcon1);
+ write32(&exynos_disp_ctrl->vidcon1, pd->ivclk | pd->fixvclk);
val = ENVID_ON | ENVID_F_ON | (pd->clkval_f << CLKVAL_F_OFFSET);
- writel(val, &exynos_fimd->vidcon0);
+ write32(&exynos_fimd->vidcon0, val);
val = (pd->vsync << VSYNC_PULSE_WIDTH_OFFSET) |
(pd->lower_margin << V_FRONT_PORCH_OFFSET) |
(pd->upper_margin << V_BACK_PORCH_OFFSET);
- writel(val, &exynos_disp_ctrl->vidtcon0);
+ write32(&exynos_disp_ctrl->vidtcon0, val);
val = (pd->hsync << HSYNC_PULSE_WIDTH_OFFSET) |
(pd->right_margin << H_FRONT_PORCH_OFFSET) |
(pd->left_margin << H_BACK_PORCH_OFFSET);
- writel(val, &exynos_disp_ctrl->vidtcon1);
+ write32(&exynos_disp_ctrl->vidtcon1, val);
val = ((pd->xres - 1) << HOZVAL_OFFSET) |
((pd->yres - 1) << LINEVAL_OFFSET);
- writel(val, &exynos_disp_ctrl->vidtcon2);
+ write32(&exynos_disp_ctrl->vidtcon2, val);
- writel((unsigned int)lcdbase, &exynos_fimd->vidw00add0b0);
- writel((unsigned int)lcdbase + fb_size, &exynos_fimd->vidw00add1b0);
+ write32(&exynos_fimd->vidw00add0b0, (unsigned int)lcdbase);
+ write32(&exynos_fimd->vidw00add1b0, (unsigned int)lcdbase + fb_size);
- writel(pd->xres * 2, &exynos_fimd->vidw00add2);
+ write32(&exynos_fimd->vidw00add2, pd->xres * 2);
val = ((pd->xres - 1) << OSD_RIGHTBOTX_F_OFFSET);
val |= ((pd->yres - 1) << OSD_RIGHTBOTY_F_OFFSET);
- writel(val, &exynos_fimd->vidosd0b);
- writel(pd->xres * pd->yres, &exynos_fimd->vidosd0c);
+ write32(&exynos_fimd->vidosd0b, val);
+ write32(&exynos_fimd->vidosd0c, pd->xres * pd->yres);
setbits_le32(&exynos_fimd->shadowcon, CHANNEL0_EN);
val = BPPMODE_F_RGB_16BIT_565 << BPPMODE_F_OFFSET;
val |= ENWIN_F_ENABLE | HALF_WORD_SWAP_EN;
- writel(val, &exynos_fimd->wincon0);
+ write32(&exynos_fimd->wincon0, val);
/* DPCLKCON_ENABLE */
- writel(1 << 1, &exynos_fimd->dpclkcon);
+ write32(&exynos_fimd->dpclkcon, 1 << 1);
}
#ifdef UNUSED_CODE
void exynos_fimd_disable(void)
{
- writel(0, &exynos_fimd->wincon0);
+ write32(&exynos_fimd->wincon0, 0);
clrbits_le32(&exynos_fimd->shadowcon, CHANNEL0_EN);
}
#endif
@@ -328,18 +328,18 @@ static int s5p_dp_set_lane_lane_pre_emphasis(struct s5p_dp_device *dp,
reg = pre_emphasis << PRE_EMPHASIS_SET_SHIFT;
switch (lane) {
case 0:
- writel(reg, &base->ln0_link_trn_ctl);
+ write32(&base->ln0_link_trn_ctl, reg);
break;
case 1:
- writel(reg, &base->ln1_link_trn_ctl);
+ write32(&base->ln1_link_trn_ctl, reg);
break;
case 2:
- writel(reg, &base->ln2_link_trn_ctl);
+ write32(&base->ln2_link_trn_ctl, reg);
break;
case 3:
- writel(reg, &base->ln3_link_trn_ctl);
+ write32(&base->ln3_link_trn_ctl, reg);
break;
default:
printk(BIOS_DEBUG, "%s: Invalid lane %d\n", __func__, lane);
@@ -432,7 +432,7 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp,
}
/* All DP analog module power up */
- writel(0x00, &base->dp_phy_pd);
+ write32(&base->dp_phy_pd, 0x00);
/* Initialize by reading RX's DPCD */
s5p_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
@@ -463,21 +463,21 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp,
dp->link_train.link_rate = max_rate;
/* Set link rate and count as you want to establish*/
- writel(dp->link_train.lane_count, &base->lane_count_set);
- writel(dp->link_train.link_rate, &base->link_bw_set);
+ write32(&base->lane_count_set, dp->link_train.lane_count);
+ write32(&base->link_bw_set, dp->link_train.link_rate);
/* Set sink to D0 (Sink Not Ready) mode. */
s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_SINK_POWER_STATE,
DPCD_SET_POWER_STATE_D0);
/* Start HW link training */
- writel(HW_TRAINING_EN, &base->dp_hw_link_training);
+ write32(&base->dp_hw_link_training, HW_TRAINING_EN);
/* Wait until HW link training done */
s5p_dp_wait_hw_link_training_done(dp);
/* Get hardware link training status */
- data = readl(&base->dp_hw_link_training);
+ data = read32(&base->dp_hw_link_training);
printk(BIOS_SPEW, "hardware link training status: 0x%08x\n", data);
if (data != 0) {
printk(BIOS_ERR, " H/W link training failure: 0x%x\n", data);
@@ -485,11 +485,11 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp,
}
/* Get Link Bandwidth */
- data = readl(&base->link_bw_set);
+ data = read32(&base->link_bw_set);
dp->link_train.link_rate = data;
- data = readl(&base->lane_count_set);
+ data = read32(&base->lane_count_set);
dp->link_train.lane_count = data;
printk(BIOS_SPEW, "Done training: Link bandwidth: 0x%x, lane_count: %d\n",
dp->link_train.link_rate, data);
@@ -541,8 +541,8 @@ int dp_controller_init(struct s5p_dp_device *dp_device)
/* Enable enhanced mode */
setbits_le32(&base->sys_ctl_4, ENHANCED);
- writel(dp->link_train.lane_count, &base->lane_count_set);
- writel(dp->link_train.link_rate, &base->link_bw_set);
+ write32(&base->lane_count_set, dp->link_train.lane_count);
+ write32(&base->link_bw_set, dp->link_train.link_rate);
s5p_dp_init_video(dp);
ret = s5p_dp_config_video(dp, dp->video_info);
diff --git a/src/soc/samsung/exynos5250/gpio.c b/src/soc/samsung/exynos5250/gpio.c
index 203aa03a42..c7a84197d0 100644
--- a/src/soc/samsung/exynos5250/gpio.c
+++ b/src/soc/samsung/exynos5250/gpio.c
@@ -82,10 +82,10 @@ void gpio_cfg_pin(int gpio, int cfg)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->con);
+ value = read32(&bank->con);
value &= ~CON_MASK(GPIO_BIT(gpio));
value |= CON_SFR(GPIO_BIT(gpio), cfg);
- writel(value, &bank->con);
+ write32(&bank->con, value);
}
static int gpio_get_cfg(int gpio)
@@ -93,7 +93,7 @@ static int gpio_get_cfg(int gpio)
struct gpio_bank *bank = gpio_get_bank(gpio);
int shift = GPIO_BIT(gpio) << 2;
- return (readl(&bank->con) & CON_MASK(GPIO_BIT(gpio))) >> shift;
+ return (read32(&bank->con) & CON_MASK(GPIO_BIT(gpio))) >> shift;
}
void gpio_set_pull(int gpio, int mode)
@@ -101,7 +101,7 @@ void gpio_set_pull(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->pull);
+ value = read32(&bank->pull);
value &= ~PULL_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -113,7 +113,7 @@ void gpio_set_pull(int gpio, int mode)
break;
}
- writel(value, &bank->pull);
+ write32(&bank->pull, value);
}
void gpio_set_drv(int gpio, int mode)
@@ -121,7 +121,7 @@ void gpio_set_drv(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->drv);
+ value = read32(&bank->drv);
value &= ~DRV_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -135,7 +135,7 @@ void gpio_set_drv(int gpio, int mode)
return;
}
- writel(value, &bank->drv);
+ write32(&bank->drv, value);
}
void gpio_set_rate(int gpio, int mode)
@@ -143,7 +143,7 @@ void gpio_set_rate(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->drv);
+ value = read32(&bank->drv);
value &= ~RATE_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -155,7 +155,7 @@ void gpio_set_rate(int gpio, int mode)
return;
}
- writel(value, &bank->drv);
+ write32(&bank->drv, value);
}
int gpio_direction_input(unsigned gpio)
@@ -170,11 +170,11 @@ int gpio_direction_output(unsigned gpio, int value)
unsigned int val;
struct gpio_bank *bank = gpio_get_bank(gpio);
- val = readl(&bank->dat);
+ val = read32(&bank->dat);
val &= ~DAT_MASK(GPIO_BIT(gpio));
if (value)
val |= DAT_SET(GPIO_BIT(gpio));
- writel(val, &bank->dat);
+ write32(&bank->dat, val);
gpio_cfg_pin(gpio, GPIO_OUTPUT);
@@ -186,7 +186,7 @@ int gpio_get_value(unsigned gpio)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->dat);
+ value = read32(&bank->dat);
return !!(value & DAT_MASK(GPIO_BIT(gpio)));
}
@@ -195,11 +195,11 @@ int gpio_set_value(unsigned gpio, int value)
unsigned int val;
struct gpio_bank *bank = gpio_get_bank(gpio);
- val = readl(&bank->dat);
+ val = read32(&bank->dat);
val &= ~DAT_MASK(GPIO_BIT(gpio));
if (value)
val |= DAT_SET(GPIO_BIT(gpio));
- writel(val, &bank->dat);
+ write32(&bank->dat, val);
return 0;
}
diff --git a/src/soc/samsung/exynos5250/i2c.c b/src/soc/samsung/exynos5250/i2c.c
index f92182a77a..e9eed406e5 100644
--- a/src/soc/samsung/exynos5250/i2c.c
+++ b/src/soc/samsung/exynos5250/i2c.c
@@ -117,34 +117,34 @@ static struct s3c24x0_i2c_bus i2c_busses[] = {
static int i2c_int_pending(struct i2c_regs *regs)
{
- return readb(&regs->con) & I2cConIntPending;
+ return read8(&regs->con) & I2cConIntPending;
}
static void i2c_clear_int(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) & ~I2cConIntPending, &regs->con);
+ write8(&regs->con, read8(&regs->con) & ~I2cConIntPending);
}
static void i2c_ack_enable(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) | I2cConAckGen, &regs->con);
+ write8(&regs->con, read8(&regs->con) | I2cConAckGen);
}
static void i2c_ack_disable(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) & ~I2cConAckGen, &regs->con);
+ write8(&regs->con, read8(&regs->con) & ~I2cConAckGen);
}
static int i2c_got_ack(struct i2c_regs *regs)
{
- return !(readb(&regs->stat) & I2cStatAck);
+ return !(read8(&regs->stat) & I2cStatAck);
}
static int i2c_wait_for_idle(struct i2c_regs *regs)
{
int timeout = 1000 * 100; // 1s.
while (timeout--) {
- if (!(readb(&regs->stat) & I2cStatBusy))
+ if (!(read8(&regs->stat) & I2cStatBusy))
return 0;
udelay(10);
}
@@ -169,17 +169,17 @@ static int i2c_wait_for_int(struct i2c_regs *regs)
static int i2c_send_stop(struct i2c_regs *regs)
{
- uint8_t mode = readb(&regs->stat) & (I2cStatModeMask);
- writeb(mode | I2cStatEnable, &regs->stat);
+ uint8_t mode = read8(&regs->stat) & (I2cStatModeMask);
+ write8(&regs->stat, mode | I2cStatEnable);
i2c_clear_int(regs);
return i2c_wait_for_idle(regs);
}
static int i2c_send_start(struct i2c_regs *regs, int read, int chip)
{
- writeb(chip << 1, &regs->ds);
+ write8(&regs->ds, chip << 1);
uint8_t mode = read ? I2cStatMasterRecv : I2cStatMasterXmit;
- writeb(mode | I2cStatStartStop | I2cStatEnable, &regs->stat);
+ write8(&regs->stat, mode | I2cStatStartStop | I2cStatEnable);
i2c_clear_int(regs);
if (i2c_wait_for_int(regs))
@@ -201,7 +201,7 @@ static int i2c_xmit_buf(struct i2c_regs *regs, uint8_t *data, int len)
int i;
for (i = 0; i < len; i++) {
- writeb(data[i], &regs->ds);
+ write8(&regs->ds, data[i]);
i2c_clear_int(regs);
if (i2c_wait_for_int(regs))
@@ -231,7 +231,7 @@ static int i2c_recv_buf(struct i2c_regs *regs, uint8_t *data, int len)
if (i2c_wait_for_int(regs))
return 1;
- data[i] = readb(&regs->ds);
+ data[i] = read8(&regs->ds);
}
return 0;
@@ -246,7 +246,7 @@ int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int seg_count)
if (!regs || i2c_wait_for_idle(regs))
return 1;
- writeb(I2cStatMasterXmit | I2cStatEnable, &regs->stat);
+ write8(&regs->stat, I2cStatMasterXmit | I2cStatEnable);
int i;
for (i = 0; i < seg_count; i++) {
@@ -286,11 +286,11 @@ void i2c_init(unsigned bus, int speed, int slaveadd)
// Set prescaler, divisor according to freq, also set ACKGEN, IRQ.
val = (div & 0x0f) | 0xa0 | ((pres == 512) ? 0x40 : 0);
- writel(val, &i2c->regs->con);
+ write32(&i2c->regs->con, val);
// Init to SLAVE RECEIVE mode and clear I2CADDn.
- writel(0, &i2c->regs->stat);
- writel(slaveadd, &i2c->regs->add);
+ write32(&i2c->regs->stat, 0);
+ write32(&i2c->regs->add, slaveadd);
// program Master Transmit (and implicit STOP).
- writel(I2cStatMasterXmit | I2cStatEnable, &i2c->regs->stat);
+ write32(&i2c->regs->stat, I2cStatMasterXmit | I2cStatEnable);
}
diff --git a/src/soc/samsung/exynos5250/power.c b/src/soc/samsung/exynos5250/power.c
index c7d491dd23..1b8aaa67d1 100644
--- a/src/soc/samsung/exynos5250/power.c
+++ b/src/soc/samsung/exynos5250/power.c
@@ -89,5 +89,5 @@ void power_enable_xclkout(void)
void power_release_uart_retention(void)
{
- writel(1 << 28, &exynos_power->padret_uart_opt);
+ write32(&exynos_power->padret_uart_opt, 1 << 28);
}
diff --git a/src/soc/samsung/exynos5250/spi.c b/src/soc/samsung/exynos5250/spi.c
index 33a8c740f7..fed3aa7518 100644
--- a/src/soc/samsung/exynos5250/spi.c
+++ b/src/soc/samsung/exynos5250/spi.c
@@ -46,25 +46,25 @@ static void exynos_spi_rx_tx(struct exynos_spi *regs, int todo,
out_bytes = in_bytes = todo;
setbits_le32(&regs->ch_cfg, SPI_CH_RST);
clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
- writel(((todo * 8) / 32) | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+ write32(&regs->pkt_cnt, ((todo * 8) / 32) | SPI_PACKET_CNT_EN);
while (in_bytes) {
uint32_t spi_sts;
int temp;
- spi_sts = readl(&regs->spi_sts);
+ spi_sts = read32(&regs->spi_sts);
rx_lvl = ((spi_sts >> 15) & 0x7f);
tx_lvl = ((spi_sts >> 6) & 0x7f);
while (tx_lvl < 32 && out_bytes) {
// TODO The "writing" (tx) is not supported now; that's
// why we write garbage to keep driving FIFO clock.
temp = 0xffffffff;
- writel(temp, &regs->tx_data);
+ write32(&regs->tx_data, temp);
out_bytes -= 4;
tx_lvl += 4;
}
while (rx_lvl >= 4 && in_bytes) {
- temp = readl(&regs->rx_data);
+ temp = read32(&regs->rx_data);
if (rxp)
*rxp++ = temp;
in_bytes -= 4;
@@ -79,9 +79,9 @@ int exynos_spi_open(struct exynos_spi *regs)
/* set the spi1 GPIO */
/* set pktcnt and enable it */
- writel(4 | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+ write32(&regs->pkt_cnt, 4 | SPI_PACKET_CNT_EN);
/* set FB_CLK_SEL */
- writel(SPI_FB_DELAY_180, &regs->fb_clk);
+ write32(&regs->fb_clk, SPI_FB_DELAY_180);
/* set CH_WIDTH and BUS_WIDTH as word */
setbits_le32(&regs->mode_cfg,
SPI_MODE_CH_WIDTH_WORD | SPI_MODE_BUS_WIDTH_WORD);
@@ -109,10 +109,10 @@ int exynos_spi_read(struct exynos_spi *regs, void *dest, u32 len, u32 off)
clrbits_le32(&regs->cs_reg, SPI_SLAVE_SIG_INACT); /* CS low */
/* Send read instruction (0x3h) followed by a 24 bit addr */
- writel((SF_READ_DATA_CMD << 24) | off, &regs->tx_data);
+ write32(&regs->tx_data, (SF_READ_DATA_CMD << 24) | off);
/* waiting for TX done */
- while (!(readl(&regs->spi_sts) & SPI_ST_TX_DONE));
+ while (!(read32(&regs->spi_sts) & SPI_ST_TX_DONE));
for (upto = 0, i = 0; upto < len; upto += todo, i++) {
todo = MIN(len - upto, (1 << 15));
@@ -132,7 +132,7 @@ int exynos_spi_close(struct exynos_spi *regs)
*/
clrbits_le32(&regs->mode_cfg,
SPI_MODE_CH_WIDTH_WORD | SPI_MODE_BUS_WIDTH_WORD);
- writel(0, &regs->swap_cfg);
+ write32(&regs->swap_cfg, 0);
/*
* Flush spi tx, rx fifos and reset the SPI controller
diff --git a/src/soc/samsung/exynos5250/timer.c b/src/soc/samsung/exynos5250/timer.c
index 1e25771dbd..2abaf3bc5d 100644
--- a/src/soc/samsung/exynos5250/timer.c
+++ b/src/soc/samsung/exynos5250/timer.c
@@ -27,16 +27,15 @@ static const uint32_t clocks_per_usec = MCT_HZ/1000000;
static uint64_t mct_raw_value(void)
{
- uint64_t upper = readl(&exynos_mct->g_cnt_u);
- uint64_t lower = readl(&exynos_mct->g_cnt_l);
+ uint64_t upper = read32(&exynos_mct->g_cnt_u);
+ uint64_t lower = read32(&exynos_mct->g_cnt_l);
return (upper << 32) | lower;
}
void init_timer(void)
{
- writel(readl(&exynos_mct->g_tcon) | (0x1 << 8),
- &exynos_mct->g_tcon);
+ write32(&exynos_mct->g_tcon, read32(&exynos_mct->g_tcon) | (0x1 << 8));
}
void timer_monotonic_get(struct mono_time *mt)
diff --git a/src/soc/samsung/exynos5250/tmu.c b/src/soc/samsung/exynos5250/tmu.c
index bde11a2550..51e7ad8894 100644
--- a/src/soc/samsung/exynos5250/tmu.c
+++ b/src/soc/samsung/exynos5250/tmu.c
@@ -80,7 +80,7 @@ static int get_cur_temp(struct tmu_info *info)
struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
/* Temperature code range between min 25 and max 125 */
- cur_temp = readl(&reg->current_temp) & 0xff;
+ cur_temp = read32(&reg->current_temp) & 0xff;
/* Calibrate current temperature */
if (cur_temp)
@@ -142,10 +142,10 @@ static void tmu_setup_parameters(struct tmu_info *info)
struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
/* Must reload for using efuse value at EXYNOS */
- writel(TRIMINFO_RELOAD, &reg->triminfo_control);
+ write32(&reg->triminfo_control, TRIMINFO_RELOAD);
/* Get the compensation parameter */
- te_temp = readl(&reg->triminfo);
+ te_temp = read32(&reg->triminfo);
info->te1 = te_temp & TRIM_INFO_MASK;
info->te2 = ((te_temp >> 8) & TRIM_INFO_MASK);
@@ -169,8 +169,8 @@ static void tmu_setup_parameters(struct tmu_info *info)
(hwtrip_code << 24));
/* Set interrupt level */
- writel(rising_value, &reg->threshold_temp_rise);
- writel(cooling_temp, &reg->threshold_temp_fall);
+ write32(&reg->threshold_temp_rise, rising_value);
+ write32(&reg->threshold_temp_fall, cooling_temp);
/*
* Need to init all register settings after getting parameter info
@@ -183,20 +183,20 @@ static void tmu_setup_parameters(struct tmu_info *info)
* TODO(bhthompson): rewrite this code such that we are not performing
* a hard wipe of tmu_control and re verify functionality.
*/
- writel(data->slope, &reg->tmu_control);
+ write32(&reg->tmu_control, data->slope);
- writel(INTCLEARALL, &reg->intclear);
+ write32(&reg->intclear, INTCLEARALL);
/* TMU core enable */
- con = readl(&reg->tmu_control);
+ con = read32(&reg->tmu_control);
con |= (info->tmu_mux << 20) | THERM_TRIP_EN | CORE_EN;
- writel(con, &reg->tmu_control);
+ write32(&reg->tmu_control, con);
/* Enable HW thermal trip */
power_enable_hw_thermal_trip();
/* LEV1 LEV2 interrupt enable */
- writel(INTEN_RISE1 | INTEN_RISE2, &reg->inten);
+ write32(&reg->inten, INTEN_RISE1 | INTEN_RISE2);
}
/*
diff --git a/src/soc/samsung/exynos5250/trustzone.c b/src/soc/samsung/exynos5250/trustzone.c
index c4d3bc64b6..4a8141eeaf 100644
--- a/src/soc/samsung/exynos5250/trustzone.c
+++ b/src/soc/samsung/exynos5250/trustzone.c
@@ -31,14 +31,14 @@ void trustzone_init(void)
tzpc = (struct exynos_tzpc *)addr;
if (addr == TZPC0_BASE)
- writel(R0SIZE, &tzpc->r0size);
+ write32(&tzpc->r0size, R0SIZE);
- writel(DECPROTXSET, &tzpc->decprot0set);
- writel(DECPROTXSET, &tzpc->decprot1set);
+ write32(&tzpc->decprot0set, DECPROTXSET);
+ write32(&tzpc->decprot1set, DECPROTXSET);
if (addr != TZPC9_BASE) {
- writel(DECPROTXSET, &tzpc->decprot2set);
- writel(DECPROTXSET, &tzpc->decprot3set);
+ write32(&tzpc->decprot2set, DECPROTXSET);
+ write32(&tzpc->decprot3set, DECPROTXSET);
}
}
}
diff --git a/src/soc/samsung/exynos5250/uart.c b/src/soc/samsung/exynos5250/uart.c
index c23cfed347..81386b7ec4 100644
--- a/src/soc/samsung/exynos5250/uart.c
+++ b/src/soc/samsung/exynos5250/uart.c
@@ -66,7 +66,7 @@ static void serial_setbrg_dev(struct s5p_uart *uart)
uclk = clock_get_periph_rate(PERIPH_ID_UART3);
val = uclk / default_baudrate();
- writel(val / 16 - 1, &uart->ubrdiv);
+ write32(&uart->ubrdiv, val / 16 - 1);
/*
* FIXME(dhendrix): the original uart.h had a "br_rest" value which
@@ -91,12 +91,12 @@ static void exynos5_init_dev(struct s5p_uart *uart)
exynos_pinmux_uart3();
/* enable FIFOs */
- writel(0x1, &uart->ufcon);
- writel(0, &uart->umcon);
+ write32(&uart->ufcon, 0x1);
+ write32(&uart->umcon, 0);
/* 8N1 */
- writel(0x3, &uart->ulcon);
+ write32(&uart->ulcon, 0x3);
/* No interrupts, no DMA, pure polling */
- writel(0x245, &uart->ucon);
+ write32(&uart->ucon, 0x245);
serial_setbrg_dev(uart);
}
@@ -117,7 +117,7 @@ static int exynos5_uart_err_check(struct s5p_uart *uart, int op)
else
mask = 0xf;
- return readl(&uart->uerstat) & mask;
+ return read32(&uart->uerstat) & mask;
}
/*
@@ -128,13 +128,13 @@ static int exynos5_uart_err_check(struct s5p_uart *uart, int op)
static unsigned char exynos5_uart_rx_byte(struct s5p_uart *uart)
{
/* wait for character to arrive */
- while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
+ while (!(read32(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
RX_FIFO_FULL_MASK))) {
if (exynos5_uart_err_check(uart, 0))
return 0;
}
- return readb(&uart->urxh) & 0xff;
+ return read8(&uart->urxh) & 0xff;
}
/*
@@ -143,17 +143,17 @@ static unsigned char exynos5_uart_rx_byte(struct s5p_uart *uart)
static void exynos5_uart_tx_byte(struct s5p_uart *uart, unsigned char data)
{
/* wait for room in the tx FIFO */
- while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
+ while ((read32(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
if (exynos5_uart_err_check(uart, 1))
return;
}
- writeb(data, &uart->utxh);
+ write8(&uart->utxh, data);
}
static void exynos5_uart_tx_flush(struct s5p_uart *uart)
{
- while (readl(&uart->ufstat) & 0x1ff0000);
+ while (read32(&uart->ufstat) & 0x1ff0000);
}
uintptr_t uart_platform_base(int idx)
diff --git a/src/soc/samsung/exynos5250/usb.c b/src/soc/samsung/exynos5250/usb.c
index 8a91497e1f..3f6833657b 100644
--- a/src/soc/samsung/exynos5250/usb.c
+++ b/src/soc/samsung/exynos5250/usb.c
@@ -51,23 +51,13 @@ static void setup_dwc3(struct exynos5_usb_drd_dwc3 *dwc3)
/* Set relevant registers to default values (clearing all reset bits) */
- writel(0x1 << 24 | /* activate PHY low power states */
- 0x4 << 19 | /* low power delay value */
- 0x1 << 18 | /* activate PHY low power delay */
- 0x1 << 17 | /* enable SuperSpeed PHY suspend */
- 0x1 << 1 | /* default Tx deemphasis value */
- 0, &dwc3->usb3pipectl);
+ write32(&dwc3->usb3pipectl,
+ 0x1 << 24 | 0x4 << 19 | 0x1 << 18 | 0x1 << 17 | 0x1 << 1 | 0);
/* Configure PHY clock turnaround for 8-bit UTMI+, disable suspend */
- writel(0x9 << 10 | /* PHY clock turnaround for 8-bit UTMI+ */
- 0x1 << 8 | /* enable PHY sleep in L1 */
- 0x1 << 6 | /* enable PHY suspend */
- 0, &dwc3->usb2phycfg);
-
- writel(0x5dc << 19 | /* suspend clock scale for 24MHz */
- 0x1 << 16 | /* retry SS three times (bugfix from U-Boot) */
- 0x1 << 12 | /* port capability HOST */
- 0, &dwc3->ctl);
+ write32(&dwc3->usb2phycfg, 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0);
+
+ write32(&dwc3->ctl, 0x5dc << 19 | 0x1 << 16 | 0x1 << 12 | 0);
}
void setup_usb_drd_dwc3()
@@ -84,44 +74,25 @@ static void setup_drd_phy(struct exynos5_usb_drd_phy *phy)
setbits_le32(&phy->linksystem, 0x1 << 27 | 0x20 << 1);
/* Disable OTG, ID0 and DRVVBUS, do not force sleep/suspend */
- writel(1 << 6, &phy->utmi);
-
- writel(0x88 << 23 | /* spread spectrum refclk selector */
- 0x1 << 20 | /* enable spread spectrum */
- 0x1 << 19 | /* enable prescaler refclk */
- 0x68 << 11 | /* multiplier for 24MHz refclk */
- 0x5 << 5 | /* select 24MHz refclk (weird, from U-Boot) */
- 0x1 << 4 | /* power supply in normal operating mode */
- 0x3 << 2 | /* use external refclk (undocumented on 5420?)*/
- 0x1 << 1 | /* force port reset */
- 0x1 << 0 | /* normal operating mode */
- 0, &phy->clkrst);
-
- writel(0x9 << 26 | /* LOS level */
- 0x3 << 22 | /* TX VREF tune */
- 0x1 << 20 | /* TX rise tune */
- 0x1 << 18 | /* TX res tune */
- 0x3 << 13 | /* TX HS X Vtune */
- 0x3 << 9 | /* TX FS/LS tune */
- 0x3 << 6 | /* SQRX tune */
- 0x4 << 3 | /* OTG tune */
- 0x4 << 0 | /* comp disc tune */
- 0, &phy->param0);
-
- writel(0x7f << 19 | /* reserved */
- 0x7f << 12 | /* Tx launch amplitude */
- 0x20 << 6 | /* Tx deemphasis 6dB */
- 0x1c << 0 | /* Tx deemphasis 3.5dB (value from U-Boot) */
- 0, &phy->param1);
+ write32(&phy->utmi, 1 << 6);
+
+ write32(&phy->clkrst,
+ 0x88 << 23 | 0x1 << 20 | 0x1 << 19 | 0x68 << 11 | 0x5 << 5 | 0x1 << 4 | 0x3 << 2 | 0x1 << 1 | 0x1 << 0 | 0);
+
+ write32(&phy->param0,
+ 0x9 << 26 | 0x3 << 22 | 0x1 << 20 | 0x1 << 18 | 0x3 << 13 | 0x3 << 9 | 0x3 << 6 | 0x4 << 3 | 0x4 << 0 | 0);
+
+ write32(&phy->param1,
+ 0x7f << 19 | 0x7f << 12 | 0x20 << 6 | 0x1c << 0 | 0);
/* disable all test features */
- writel(0, &phy->test);
+ write32(&phy->test, 0);
/* UTMI clock select? ("must be 0x1") */
- writel(0x1 << 2, &phy->utmiclksel);
+ write32(&phy->utmiclksel, 0x1 << 2);
/* Samsung magic, undocumented (from U-Boot) */
- writel(0x0, &phy->resume);
+ write32(&phy->resume, 0x0);
udelay(10);
clrbits_le32(&phy->clkrst, 0x1 << 1); /* deassert port reset */
@@ -144,7 +115,7 @@ void setup_usb_host_phy(int hsic_gpio)
printk(BIOS_DEBUG, "Powering up USB HOST PHY (%s HSIC)\n",
hsic_gpio ? "with" : "without");
- hostphy_ctrl0 = readl(&exynos_usb_host_phy->usbphyctrl0);
+ hostphy_ctrl0 = read32(&exynos_usb_host_phy->usbphyctrl0);
hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK |
HOST_CTRL0_COMMONON_N |
/* HOST Phy setting */
@@ -158,7 +129,7 @@ void setup_usb_host_phy(int hsic_gpio)
/* HOST Phy setting */
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
- writel(hostphy_ctrl0, &exynos_usb_host_phy->usbphyctrl0);
+ write32(&exynos_usb_host_phy->usbphyctrl0, hostphy_ctrl0);
udelay(10);
clrbits_le32(&exynos_usb_host_phy->usbphyctrl0,
HOST_CTRL0_LINKSWRST |
diff --git a/src/soc/samsung/exynos5420/clock.c b/src/soc/samsung/exynos5420/clock.c
index f6c7845c54..971364ddfe 100644
--- a/src/soc/samsung/exynos5420/clock.c
+++ b/src/soc/samsung/exynos5420/clock.c
@@ -47,34 +47,34 @@ unsigned long get_pll_clk(int pllreg)
switch (pllreg) {
case APLL:
- r = readl(&exynos_clock->apll_con0);
+ r = read32(&exynos_clock->apll_con0);
break;
case MPLL:
- r = readl(&exynos_clock->mpll_con0);
+ r = read32(&exynos_clock->mpll_con0);
break;
case EPLL:
- r = readl(&exynos_clock->epll_con0);
- k = readl(&exynos_clock->epll_con1);
+ r = read32(&exynos_clock->epll_con0);
+ k = read32(&exynos_clock->epll_con1);
break;
case VPLL:
- r = readl(&exynos_clock->vpll_con0);
- k = readl(&exynos_clock->vpll_con1);
+ r = read32(&exynos_clock->vpll_con0);
+ k = read32(&exynos_clock->vpll_con1);
break;
case BPLL:
- r = readl(&exynos_clock->bpll_con0);
+ r = read32(&exynos_clock->bpll_con0);
break;
case RPLL:
- r = readl(&exynos_clock->rpll_con0);
- k = readl(&exynos_clock->rpll_con1);
+ r = read32(&exynos_clock->rpll_con0);
+ k = read32(&exynos_clock->rpll_con1);
break;
case SPLL:
- r = readl(&exynos_clock->spll_con0);
+ r = read32(&exynos_clock->spll_con0);
break;
case CPLL:
- r = readl(&exynos_clock->cpll_con0);
+ r = read32(&exynos_clock->cpll_con0);
break;
case DPLL:
- r = readl(&exynos_clock->dpll_con0);
+ r = read32(&exynos_clock->dpll_con0);
break;
default:
printk(BIOS_DEBUG, "Unsupported PLL (%d)\n", pllreg);
@@ -169,48 +169,48 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
switch (peripheral) {
case PERIPH_ID_UART0:
- src = (readl(&exynos_clock->clk_src_peric0) >> 4) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 8) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 4) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 8) & 0xf;
break;
case PERIPH_ID_UART1:
- src = (readl(&exynos_clock->clk_src_peric0) >> 8) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 12) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 8) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 12) & 0xf;
break;
case PERIPH_ID_UART2:
- src = (readl(&exynos_clock->clk_src_peric0) >> 12) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 16) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 12) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 16) & 0xf;
break;
case PERIPH_ID_UART3:
- src = (readl(&exynos_clock->clk_src_peric0) >> 16) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 20) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 16) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 20) & 0xf;
break;
case PERIPH_ID_PWM0:
case PERIPH_ID_PWM1:
case PERIPH_ID_PWM2:
case PERIPH_ID_PWM3:
case PERIPH_ID_PWM4:
- src = (readl(&exynos_clock->clk_src_peric0) >> 24) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 28) & 0x7;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 24) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 28) & 0x7;
break;
case PERIPH_ID_SPI0:
- src = (readl(&exynos_clock->clk_src_peric1) >> 20) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric1) >> 20) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric1) >> 20) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric1) >> 20) & 0xf;
break;
case PERIPH_ID_SPI1:
- src = (readl(&exynos_clock->clk_src_peric1) >> 24) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric1) >> 24) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric1) >> 24) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric1) >> 24) & 0xf;
break;
case PERIPH_ID_SPI2:
- src = (readl(&exynos_clock->clk_src_peric1) >> 28) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric1) >> 28) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric1) >> 28) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric1) >> 28) & 0xf;
break;
case PERIPH_ID_SPI3: /* aka SPI0_ISP */
- src = (readl(&exynos_clock->clk_src_isp) >> 16) & 0x7;
- div = (readl(&exynos_clock->clk_div_isp0) >> 0) & 0x7;
+ src = (read32(&exynos_clock->clk_src_isp) >> 16) & 0x7;
+ div = (read32(&exynos_clock->clk_div_isp0) >> 0) & 0x7;
break;
case PERIPH_ID_SPI4: /* aka SPI1_ISP */
- src = (readl(&exynos_clock->clk_src_isp) >> 12) & 0x7;
- div = (readl(&exynos_clock->clk_div_isp1) >> 4) & 0x7;
+ src = (read32(&exynos_clock->clk_src_isp) >> 12) & 0x7;
+ div = (read32(&exynos_clock->clk_div_isp1) >> 4) & 0x7;
break;
case PERIPH_ID_I2C0:
case PERIPH_ID_I2C1:
@@ -229,7 +229,7 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
* TODO: Add a helper function like with the peripheral clock
* select fields?
*/
- src = (readl(&exynos_clock->clk_src_top1) >> 8) & 0x3;
+ src = (read32(&exynos_clock->clk_src_top1) >> 8) & 0x3;
if (src == 0x0)
src = CPLL;
else if (src == 0x1)
@@ -240,7 +240,7 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
return -1;
sclk = get_pll_clk(src);
- div = ((readl(&exynos_clock->clk_div_top1) >> 8) & 0x3f) + 1;
+ div = ((read32(&exynos_clock->clk_div_top1) >> 8) & 0x3f) + 1;
return sclk / div;
default:
printk(BIOS_DEBUG, "%s: invalid peripheral %d",
@@ -267,7 +267,7 @@ unsigned long get_arm_clk(void)
unsigned int arm_ratio;
unsigned int arm2_ratio;
- div = readl(&exynos_clock->clk_div_cpu0);
+ div = read32(&exynos_clock->clk_div_cpu0);
/* ARM_RATIO: [2:0], ARM2_RATIO: [30:28] */
arm_ratio = (div >> 0) & 0x7;
@@ -286,7 +286,7 @@ static unsigned long get_mmc_clk(int dev_index)
unsigned int sel, ratio;
int shift = 0;
- sel = readl(&exynos_clock->clk_src_fsys);
+ sel = read32(&exynos_clock->clk_src_fsys);
sel = (sel >> ((dev_index * 4) + 8)) & 0x7;
if (sel == 0x3)
@@ -296,7 +296,7 @@ static unsigned long get_mmc_clk(int dev_index)
else
return 0;
- ratio = readl(&exynos_clock->clk_div_fsys1);
+ ratio = read32(&exynos_clock->clk_div_fsys1);
shift = dev_index * 10;
@@ -316,10 +316,10 @@ void set_mmc_clk(int dev_index, unsigned int div)
addr = &exynos_clock->clk_div_fsys1;
shift = dev_index * 10;
- val = readl(addr);
+ val = read32(addr);
val &= ~(0x3ff << shift);
val |= (div & 0x3ff) << shift;
- writel(val, addr);
+ write32(addr, val);
}
/* Set DW MMC Controller clock */
@@ -546,10 +546,10 @@ int clock_set_mshci(enum periph_id peripheral)
printk(BIOS_DEBUG, "invalid peripheral\n");
return -1;
}
- tmp = readl(addr) & ~0xff0f;
+ tmp = read32(addr) & ~0xff0f;
for (i = 0; i <= 0xf; i++) {
if ((clock / (i + 1)) <= 400) {
- writel(tmp | i << 0, addr);
+ write32(addr, tmp | i << 0);
break;
}
}
@@ -563,7 +563,7 @@ int clock_epll_set_rate(unsigned long rate)
unsigned int lockcnt;
struct stopwatch sw;
- epll_con = readl(&exynos_clock->epll_con0);
+ epll_con = read32(&exynos_clock->epll_con0);
epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK <<
EPLL_CON0_LOCK_DET_EN_SHIFT) |
EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT |
@@ -591,13 +591,13 @@ int clock_epll_set_rate(unsigned long rate)
*/
lockcnt = 3000 * epll_div[i].p_div;
- writel(lockcnt, &exynos_clock->epll_lock);
- writel(epll_con, &exynos_clock->epll_con0);
- writel(epll_con_k, &exynos_clock->epll_con1);
+ write32(&exynos_clock->epll_lock, lockcnt);
+ write32(&exynos_clock->epll_con0, epll_con);
+ write32(&exynos_clock->epll_con1, epll_con_k);
stopwatch_init_msecs_expire(&sw, TIMEOUT_EPLL_LOCK);
- while (!(readl(&exynos_clock->epll_con0) &
+ while (!(read32(&exynos_clock->epll_con0) &
(0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) {
if (stopwatch_expired(&sw)) {
printk(BIOS_DEBUG, "%s: Timeout waiting for EPLL lock\n", __func__);
diff --git a/src/soc/samsung/exynos5420/clock_init.c b/src/soc/samsung/exynos5420/clock_init.c
index 25b8beecd1..c5b4aaaa3f 100644
--- a/src/soc/samsung/exynos5420/clock_init.c
+++ b/src/soc/samsung/exynos5420/clock_init.c
@@ -35,186 +35,186 @@ void system_clock_init(void)
exynos_mct->g_tcon |= (1 << 8);
/* PLL locktime */
- writel(APLL_LOCK_VAL, &exynos_clock->apll_lock);
- writel(MPLL_LOCK_VAL, &exynos_clock->mpll_lock);
- writel(BPLL_LOCK_VAL, &exynos_clock->bpll_lock);
- writel(CPLL_LOCK_VAL, &exynos_clock->cpll_lock);
- writel(DPLL_LOCK_VAL, &exynos_clock->dpll_lock);
- writel(EPLL_LOCK_VAL, &exynos_clock->epll_lock);
- writel(VPLL_LOCK_VAL, &exynos_clock->vpll_lock);
- writel(IPLL_LOCK_VAL, &exynos_clock->ipll_lock);
- writel(SPLL_LOCK_VAL, &exynos_clock->spll_lock);
- writel(KPLL_LOCK_VAL, &exynos_clock->kpll_lock);
- writel(RPLL_LOCK_VAL, &exynos_clock->rpll_lock);
+ write32(&exynos_clock->apll_lock, APLL_LOCK_VAL);
+ write32(&exynos_clock->mpll_lock, MPLL_LOCK_VAL);
+ write32(&exynos_clock->bpll_lock, BPLL_LOCK_VAL);
+ write32(&exynos_clock->cpll_lock, CPLL_LOCK_VAL);
+ write32(&exynos_clock->dpll_lock, DPLL_LOCK_VAL);
+ write32(&exynos_clock->epll_lock, EPLL_LOCK_VAL);
+ write32(&exynos_clock->vpll_lock, VPLL_LOCK_VAL);
+ write32(&exynos_clock->ipll_lock, IPLL_LOCK_VAL);
+ write32(&exynos_clock->spll_lock, SPLL_LOCK_VAL);
+ write32(&exynos_clock->kpll_lock, KPLL_LOCK_VAL);
+ write32(&exynos_clock->rpll_lock, RPLL_LOCK_VAL);
setbits_le32(&exynos_clock->clk_src_cpu, MUX_HPM_SEL_MASK);
- writel(0, &exynos_clock->clk_src_top6);
+ write32(&exynos_clock->clk_src_top6, 0);
- writel(0, &exynos_clock->clk_src_cdrex);
- writel(SRC_KFC_HPM_SEL, &exynos_clock->clk_src_kfc);
- writel(HPM_RATIO, &exynos_clock->clk_div_cpu1);
- writel(CLK_DIV_CPU0_VAL, &exynos_clock->clk_div_cpu0);
+ write32(&exynos_clock->clk_src_cdrex, 0);
+ write32(&exynos_clock->clk_src_kfc, SRC_KFC_HPM_SEL);
+ write32(&exynos_clock->clk_div_cpu1, HPM_RATIO);
+ write32(&exynos_clock->clk_div_cpu0, CLK_DIV_CPU0_VAL);
/* switch A15 clock source to OSC clock before changing APLL */
clrbits_le32(&exynos_clock->clk_src_cpu, APLL_FOUT);
/* Set APLL */
- writel(APLL_CON1_VAL, &exynos_clock->apll_con1);
+ write32(&exynos_clock->apll_con1, APLL_CON1_VAL);
val = set_pll(225, 3, 0); /* FOUT=1800MHz */
- writel(val, &exynos_clock->apll_con0);
- while ((readl(&exynos_clock->apll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->apll_con0, val);
+ while ((read32(&exynos_clock->apll_con0) & PLL_LOCKED) == 0)
;
/* now it is safe to switch to APLL */
setbits_le32(&exynos_clock->clk_src_cpu, APLL_FOUT);
- writel(SRC_KFC_HPM_SEL, &exynos_clock->clk_src_kfc);
- writel(CLK_DIV_KFC_VAL, &exynos_clock->clk_div_kfc0);
+ write32(&exynos_clock->clk_src_kfc, SRC_KFC_HPM_SEL);
+ write32(&exynos_clock->clk_div_kfc0, CLK_DIV_KFC_VAL);
/* switch A7 clock source to OSC clock before changing KPLL */
clrbits_le32(&exynos_clock->clk_src_kfc, KPLL_FOUT);
/* Set KPLL*/
- writel(KPLL_CON1_VAL, &exynos_clock->kpll_con1);
+ write32(&exynos_clock->kpll_con1, KPLL_CON1_VAL);
val = set_pll(0x190, 0x4, 0x2);
- writel(val, &exynos_clock->kpll_con0);
- while ((readl(&exynos_clock->kpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->kpll_con0, val);
+ while ((read32(&exynos_clock->kpll_con0) & PLL_LOCKED) == 0)
;
/* now it is safe to switch to KPLL */
setbits_le32(&exynos_clock->clk_src_kfc, KPLL_FOUT);
/* Set MPLL */
- writel(MPLL_CON1_VAL, &exynos_clock->mpll_con1);
+ write32(&exynos_clock->mpll_con1, MPLL_CON1_VAL);
val = set_pll(0xc8, 0x3, 0x1);
- writel(val, &exynos_clock->mpll_con0);
- while ((readl(&exynos_clock->mpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->mpll_con0, val);
+ while ((read32(&exynos_clock->mpll_con0) & PLL_LOCKED) == 0)
;
/* Set DPLL */
- writel(DPLL_CON1_VAL, &exynos_clock->dpll_con1);
+ write32(&exynos_clock->dpll_con1, DPLL_CON1_VAL);
val = set_pll(0x190, 0x4, 0x2);
- writel(val, &exynos_clock->dpll_con0);
- while ((readl(&exynos_clock->dpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->dpll_con0, val);
+ while ((read32(&exynos_clock->dpll_con0) & PLL_LOCKED) == 0)
;
/* Set EPLL */
- writel(EPLL_CON2_VAL, &exynos_clock->epll_con2);
- writel(EPLL_CON1_VAL, &exynos_clock->epll_con1);
+ write32(&exynos_clock->epll_con2, EPLL_CON2_VAL);
+ write32(&exynos_clock->epll_con1, EPLL_CON1_VAL);
val = set_pll(0x64, 0x2, 0x1);
- writel(val, &exynos_clock->epll_con0);
- while ((readl(&exynos_clock->epll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->epll_con0, val);
+ while ((read32(&exynos_clock->epll_con0) & PLL_LOCKED) == 0)
;
/* Set CPLL */
- writel(CPLL_CON1_VAL, &exynos_clock->cpll_con1);
+ write32(&exynos_clock->cpll_con1, CPLL_CON1_VAL);
val = set_pll(0xde, 0x4, 0x1);
- writel(val, &exynos_clock->cpll_con0);
- while ((readl(&exynos_clock->cpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->cpll_con0, val);
+ while ((read32(&exynos_clock->cpll_con0) & PLL_LOCKED) == 0)
;
/* Set IPLL */
- writel(IPLL_CON1_VAL, &exynos_clock->ipll_con1);
+ write32(&exynos_clock->ipll_con1, IPLL_CON1_VAL);
val = set_pll(0xB9, 0x3, 0x2);
- writel(val, &exynos_clock->ipll_con0);
- while ((readl(&exynos_clock->ipll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->ipll_con0, val);
+ while ((read32(&exynos_clock->ipll_con0) & PLL_LOCKED) == 0)
;
/* Set VPLL */
- writel(VPLL_CON1_VAL, &exynos_clock->vpll_con1);
+ write32(&exynos_clock->vpll_con1, VPLL_CON1_VAL);
val = set_pll(0xd7, 0x3, 0x2);
- writel(val, &exynos_clock->vpll_con0);
- while ((readl(&exynos_clock->vpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->vpll_con0, val);
+ while ((read32(&exynos_clock->vpll_con0) & PLL_LOCKED) == 0)
;
/* Set BPLL */
- writel(BPLL_CON1_VAL, &exynos_clock->bpll_con1);
+ write32(&exynos_clock->bpll_con1, BPLL_CON1_VAL);
val = set_pll(0xc8, 0x3, 0x1);
- writel(val, &exynos_clock->bpll_con0);
- while ((readl(&exynos_clock->bpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->bpll_con0, val);
+ while ((read32(&exynos_clock->bpll_con0) & PLL_LOCKED) == 0)
;
/* Set SPLL */
- writel(SPLL_CON1_VAL, &exynos_clock->spll_con1);
+ write32(&exynos_clock->spll_con1, SPLL_CON1_VAL);
val = set_pll(200, 0x3, 0x2); /* 400MHz */
- writel(val, &exynos_clock->spll_con0);
- while ((readl(&exynos_clock->spll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->spll_con0, val);
+ while ((read32(&exynos_clock->spll_con0) & PLL_LOCKED) == 0)
;
/* We use RPLL as the source for FIMD video stream clock */
- writel(RPLL_CON1_VAL, &exynos_clock->rpll_con1);
- writel(RPLL_CON2_VAL, &exynos_clock->rpll_con2);
+ write32(&exynos_clock->rpll_con1, RPLL_CON1_VAL);
+ write32(&exynos_clock->rpll_con2, RPLL_CON2_VAL);
/* computed by gabe from first principles; u-boot is probably
* wrong again
*/
val = set_pll(0xa0, 0x3, 0x2);
- writel(val, &exynos_clock->rpll_con0);
+ write32(&exynos_clock->rpll_con0, val);
/* note: this is a meaningless exercise. The hardware lock
* detection does not work. So this just spins for some
* time and is done. NO indication of success should attach
* to this or any other spin on a con0 value.
*/
- while ((readl(&exynos_clock->rpll_con0) & PLL_LOCKED) == 0)
+ while ((read32(&exynos_clock->rpll_con0) & PLL_LOCKED) == 0)
;
- writel(CLK_DIV_CDREX0_VAL, &exynos_clock->clk_div_cdrex0);
- writel(CLK_DIV_CDREX1_VAL, &exynos_clock->clk_div_cdrex1);
+ write32(&exynos_clock->clk_div_cdrex0, CLK_DIV_CDREX0_VAL);
+ write32(&exynos_clock->clk_div_cdrex1, CLK_DIV_CDREX1_VAL);
- writel(CLK_SRC_TOP0_VAL, &exynos_clock->clk_src_top0);
- writel(CLK_SRC_TOP1_VAL, &exynos_clock->clk_src_top1);
- writel(CLK_SRC_TOP2_VAL, &exynos_clock->clk_src_top2);
- writel(CLK_SRC_TOP7_VAL, &exynos_clock->clk_src_top7);
+ write32(&exynos_clock->clk_src_top0, CLK_SRC_TOP0_VAL);
+ write32(&exynos_clock->clk_src_top1, CLK_SRC_TOP1_VAL);
+ write32(&exynos_clock->clk_src_top2, CLK_SRC_TOP2_VAL);
+ write32(&exynos_clock->clk_src_top7, CLK_SRC_TOP7_VAL);
- writel(CLK_DIV_TOP0_VAL, &exynos_clock->clk_div_top0);
- writel(CLK_DIV_TOP1_VAL, &exynos_clock->clk_div_top1);
- writel(CLK_DIV_TOP2_VAL, &exynos_clock->clk_div_top2);
+ write32(&exynos_clock->clk_div_top0, CLK_DIV_TOP0_VAL);
+ write32(&exynos_clock->clk_div_top1, CLK_DIV_TOP1_VAL);
+ write32(&exynos_clock->clk_div_top2, CLK_DIV_TOP2_VAL);
- writel(0, &exynos_clock->clk_src_top10);
- writel(0, &exynos_clock->clk_src_top11);
- writel(0, &exynos_clock->clk_src_top12);
+ write32(&exynos_clock->clk_src_top10, 0);
+ write32(&exynos_clock->clk_src_top11, 0);
+ write32(&exynos_clock->clk_src_top12, 0);
- writel(CLK_SRC_TOP3_VAL, &exynos_clock->clk_src_top3);
- writel(CLK_SRC_TOP4_VAL, &exynos_clock->clk_src_top4);
- writel(CLK_SRC_TOP5_VAL, &exynos_clock->clk_src_top5);
+ write32(&exynos_clock->clk_src_top3, CLK_SRC_TOP3_VAL);
+ write32(&exynos_clock->clk_src_top4, CLK_SRC_TOP4_VAL);
+ write32(&exynos_clock->clk_src_top5, CLK_SRC_TOP5_VAL);
/* DISP1 BLK CLK SELECTION */
- writel(CLK_SRC_DISP1_0_VAL, &exynos_clock->clk_src_disp10);
- writel(CLK_DIV_DISP1_0_VAL, &exynos_clock->clk_div_disp10);
+ write32(&exynos_clock->clk_src_disp10, CLK_SRC_DISP1_0_VAL);
+ write32(&exynos_clock->clk_div_disp10, CLK_DIV_DISP1_0_VAL);
/* AUDIO BLK */
- writel(AUDIO0_SEL_EPLL, &exynos_clock->clk_src_mau);
- writel(DIV_MAU_VAL, &exynos_clock->clk_div_mau);
+ write32(&exynos_clock->clk_src_mau, AUDIO0_SEL_EPLL);
+ write32(&exynos_clock->clk_div_mau, DIV_MAU_VAL);
/* FSYS */
- writel(CLK_SRC_FSYS0_VAL, &exynos_clock->clk_src_fsys);
- writel(CLK_DIV_FSYS0_VAL, &exynos_clock->clk_div_fsys0);
- writel(CLK_DIV_FSYS1_VAL, &exynos_clock->clk_div_fsys1);
- writel(CLK_DIV_FSYS2_VAL, &exynos_clock->clk_div_fsys2);
-
- writel(CLK_SRC_ISP_VAL, &exynos_clock->clk_src_isp);
- writel(CLK_DIV_ISP0_VAL, &exynos_clock->clk_div_isp0);
- writel(CLK_DIV_ISP1_VAL, &exynos_clock->clk_div_isp1);
-
- writel(CLK_SRC_PERIC0_VAL, &exynos_clock->clk_src_peric0);
- writel(CLK_SRC_PERIC1_VAL, &exynos_clock->clk_src_peric1);
-
- writel(CLK_DIV_PERIC0_VAL, &exynos_clock->clk_div_peric0);
- writel(CLK_DIV_PERIC1_VAL, &exynos_clock->clk_div_peric1);
- writel(CLK_DIV_PERIC2_VAL, &exynos_clock->clk_div_peric2);
- writel(CLK_DIV_PERIC3_VAL, &exynos_clock->clk_div_peric3);
- writel(CLK_DIV_PERIC4_VAL, &exynos_clock->clk_div_peric4);
-
- writel(CLK_DIV_CPERI1_VAL, &exynos_clock->clk_div_cperi1);
-
- writel(CLK_DIV2_RATIO, &exynos_clock->clkdiv2_ratio);
- writel(CLK_DIV4_RATIO, &exynos_clock->clkdiv4_ratio);
- writel(CLK_DIV_G2D, &exynos_clock->clk_div_g2d);
-
- writel(CLK_SRC_CPU_VAL, &exynos_clock->clk_src_cpu);
- writel(CLK_SRC_TOP6_VAL, &exynos_clock->clk_src_top6);
- writel(CLK_SRC_CDREX_VAL, &exynos_clock->clk_src_cdrex);
- writel(CLK_SRC_KFC_VAL, &exynos_clock->clk_src_kfc);
+ write32(&exynos_clock->clk_src_fsys, CLK_SRC_FSYS0_VAL);
+ write32(&exynos_clock->clk_div_fsys0, CLK_DIV_FSYS0_VAL);
+ write32(&exynos_clock->clk_div_fsys1, CLK_DIV_FSYS1_VAL);
+ write32(&exynos_clock->clk_div_fsys2, CLK_DIV_FSYS2_VAL);
+
+ write32(&exynos_clock->clk_src_isp, CLK_SRC_ISP_VAL);
+ write32(&exynos_clock->clk_div_isp0, CLK_DIV_ISP0_VAL);
+ write32(&exynos_clock->clk_div_isp1, CLK_DIV_ISP1_VAL);
+
+ write32(&exynos_clock->clk_src_peric0, CLK_SRC_PERIC0_VAL);
+ write32(&exynos_clock->clk_src_peric1, CLK_SRC_PERIC1_VAL);
+
+ write32(&exynos_clock->clk_div_peric0, CLK_DIV_PERIC0_VAL);
+ write32(&exynos_clock->clk_div_peric1, CLK_DIV_PERIC1_VAL);
+ write32(&exynos_clock->clk_div_peric2, CLK_DIV_PERIC2_VAL);
+ write32(&exynos_clock->clk_div_peric3, CLK_DIV_PERIC3_VAL);
+ write32(&exynos_clock->clk_div_peric4, CLK_DIV_PERIC4_VAL);
+
+ write32(&exynos_clock->clk_div_cperi1, CLK_DIV_CPERI1_VAL);
+
+ write32(&exynos_clock->clkdiv2_ratio, CLK_DIV2_RATIO);
+ write32(&exynos_clock->clkdiv4_ratio, CLK_DIV4_RATIO);
+ write32(&exynos_clock->clk_div_g2d, CLK_DIV_G2D);
+
+ write32(&exynos_clock->clk_src_cpu, CLK_SRC_CPU_VAL);
+ write32(&exynos_clock->clk_src_top6, CLK_SRC_TOP6_VAL);
+ write32(&exynos_clock->clk_src_cdrex, CLK_SRC_CDREX_VAL);
+ write32(&exynos_clock->clk_src_kfc, CLK_SRC_KFC_VAL);
}
void clock_gate(void)
diff --git a/src/soc/samsung/exynos5420/dmc_common.c b/src/soc/samsung/exynos5420/dmc_common.c
index cb1546e61a..c6fe09d705 100644
--- a/src/soc/samsung/exynos5420/dmc_common.c
+++ b/src/soc/samsung/exynos5420/dmc_common.c
@@ -45,19 +45,19 @@ int dmc_config_zq(struct mem_timings *mem,
val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT;
val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT;
val |= ZQ_CLK_DIV_EN;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* Disable termination */
if (mem->zq_mode_noterm)
val |= PHY_CON16_ZQ_MODE_NOTERM_MASK;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* ZQ_MANUAL_START: Enable */
val |= ZQ_MANUAL_STR;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* ZQ_MANUAL_START: Disable */
val &= ~ZQ_MANUAL_STR;
@@ -67,22 +67,22 @@ int dmc_config_zq(struct mem_timings *mem,
* we are looping for the ZQ_init to complete.
*/
i = ZQ_INIT_TIMEOUT;
- while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+ while ((read32(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
udelay(1);
i--;
}
if (!i)
return -1;
- writel(val, &phy0_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
i = ZQ_INIT_TIMEOUT;
- while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+ while ((read32(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
udelay(1);
i--;
}
if (!i)
return -1;
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy1_ctrl->phy_con16, val);
return 0;
}
@@ -93,18 +93,18 @@ void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode)
if (mode == DDR_MODE_DDR3) {
val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
}
/* Update DLL Information: Force DLL Resynchronization */
- val = readl(&dmc->phycontrol0);
+ val = read32(&dmc->phycontrol0);
val |= FP_RSYNC;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
/* Reset Force DLL Resynchronization */
- val = readl(&dmc->phycontrol0);
+ val = read32(&dmc->phycontrol0);
val &= ~FP_RSYNC;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
}
void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
@@ -121,7 +121,7 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
mask |= chip << DIRECT_CMD_CHIP_SHIFT;
/* Sending NOP command */
- writel(DIRECT_CMD_NOP | mask, &dmc->directcmd);
+ write32(&dmc->directcmd, DIRECT_CMD_NOP | mask);
/*
* TODO(alim.akhtar@samsung.com): Do we need these
@@ -132,15 +132,15 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
/* Sending EMRS/MRS commands */
for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
- writel(mem->direct_cmd_msr[i] | mask,
- &dmc->directcmd);
+ write32(&dmc->directcmd,
+ mem->direct_cmd_msr[i] | mask);
udelay(100);
}
if (mem->send_zq_init) {
/* Sending ZQINIT command */
- writel(DIRECT_CMD_ZQINIT | mask,
- &dmc->directcmd);
+ write32(&dmc->directcmd,
+ DIRECT_CMD_ZQINIT | mask);
/*
* FIXME: This was originally sdelay(10000)
* in the imported u-boot code. That may have
@@ -166,7 +166,7 @@ void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc)
mask |= chip << DIRECT_CMD_CHIP_SHIFT;
/* PALL (all banks precharge) CMD */
- writel(DIRECT_CMD_PALL | mask, &dmc->directcmd);
+ write32(&dmc->directcmd, DIRECT_CMD_PALL | mask);
udelay(100);
}
}
diff --git a/src/soc/samsung/exynos5420/dmc_init_ddr3.c b/src/soc/samsung/exynos5420/dmc_init_ddr3.c
index 8186b6dbdf..6972618ac3 100644
--- a/src/soc/samsung/exynos5420/dmc_init_ddr3.c
+++ b/src/soc/samsung/exynos5420/dmc_init_ddr3.c
@@ -47,40 +47,40 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
/* Enable BYPASS mode */
setbits_le32(&exynos_clock->bpll_con1, BYPASS_EN);
- writel(MUX_BPLL_SEL_FOUTBPLL, &exynos_clock->clk_src_cdrex);
+ write32(&exynos_clock->clk_src_cdrex, MUX_BPLL_SEL_FOUTBPLL);
do {
- val = readl(&exynos_clock->clk_mux_stat_cdrex);
+ val = read32(&exynos_clock->clk_mux_stat_cdrex);
val &= BPLL_SEL_MASK;
} while (val != FOUTBPLL);
clrbits_le32(&exynos_clock->bpll_con1, BYPASS_EN);
/* Specify the DDR memory type as DDR3 */
- val = readl(&exynos_phy0_control->phy_con0);
+ val = read32(&exynos_phy0_control->phy_con0);
val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
val |= (mem->mem_type << PHY_CON0_CTRL_DDR_MODE_SHIFT);
- writel(val, &exynos_phy0_control->phy_con0);
+ write32(&exynos_phy0_control->phy_con0, val);
- val = readl(&exynos_phy1_control->phy_con0);
+ val = read32(&exynos_phy1_control->phy_con0);
val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
val |= (mem->mem_type << PHY_CON0_CTRL_DDR_MODE_SHIFT);
- writel(val, &exynos_phy1_control->phy_con0);
+ write32(&exynos_phy1_control->phy_con0, val);
/* Set Read Latency and Burst Length for PHY0 and PHY1 */
val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
- writel(val, &exynos_phy0_control->phy_con42);
- writel(val, &exynos_phy1_control->phy_con42);
+ write32(&exynos_phy0_control->phy_con42, val);
+ write32(&exynos_phy1_control->phy_con42, val);
- val = readl(&exynos_phy0_control->phy_con26);
+ val = read32(&exynos_phy0_control->phy_con26);
val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
- writel(val, &exynos_phy0_control->phy_con26);
+ write32(&exynos_phy0_control->phy_con26, val);
- val = readl(&exynos_phy1_control->phy_con26);
+ val = read32(&exynos_phy1_control->phy_con26);
val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
- writel(val, &exynos_phy1_control->phy_con26);
+ write32(&exynos_phy1_control->phy_con26, val);
/* Set Driver strength for CK, CKE, CS & CA to 0x7
* Set Driver strength for Data Slice 0~3 to 0x6
@@ -89,8 +89,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
(0x7 << CA_CS_DRVR_DS_OFFSET) | (0x7 << CA_ADR_DRVR_DS_OFFSET);
val |= (0x7 << DA_3_DS_OFFSET) | (0x7 << DA_2_DS_OFFSET) |
(0x7 << DA_1_DS_OFFSET) | (0x7 << DA_0_DS_OFFSET);
- writel(val, &exynos_phy0_control->phy_con39);
- writel(val, &exynos_phy1_control->phy_con39);
+ write32(&exynos_phy0_control->phy_con39, val);
+ write32(&exynos_phy1_control->phy_con39, val);
/* ZQ Calibration */
if (dmc_config_zq(mem, exynos_phy0_control, exynos_phy1_control))
@@ -100,31 +100,27 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
clrbits_le32(&exynos_phy1_control->phy_con16, ZQ_CLK_DIV_EN);
/* DQ Signal */
- val = readl(&exynos_phy0_control->phy_con14);
+ val = read32(&exynos_phy0_control->phy_con14);
val |= mem->phy0_pulld_dqs;
- writel(val, &exynos_phy0_control->phy_con14);
- val = readl(&exynos_phy1_control->phy_con14);
+ write32(&exynos_phy0_control->phy_con14, val);
+ val = read32(&exynos_phy1_control->phy_con14);
val |= mem->phy1_pulld_dqs;
- writel(val, &exynos_phy1_control->phy_con14);
+ write32(&exynos_phy1_control->phy_con14, val);
val = MEM_TERM_EN | PHY_TERM_EN;
- writel(val, &exynos_drex0->phycontrol0);
- writel(val, &exynos_drex1->phycontrol0);
-
- writel(mem->concontrol |
- (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
- (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
- &exynos_drex0->concontrol);
- writel(mem->concontrol |
- (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
- (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
- &exynos_drex1->concontrol);
+ write32(&exynos_drex0->phycontrol0, val);
+ write32(&exynos_drex1->phycontrol0, val);
+
+ write32(&exynos_drex0->concontrol,
+ mem->concontrol | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT));
+ write32(&exynos_drex1->concontrol,
+ mem->concontrol | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT));
do {
- val = readl(&exynos_drex0->phystatus);
+ val = read32(&exynos_drex0->phystatus);
} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
do {
- val = readl(&exynos_drex1->phystatus);
+ val = read32(&exynos_drex1->phystatus);
} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
clrbits_le32(&exynos_drex0->concontrol, DFI_INIT_START);
@@ -134,41 +130,41 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
update_reset_dll(exynos_drex1, mem->mem_type);
/* MEMBASECONFIG0 (CS0) */
- writel(mem->membaseconfig0, &exynos_tzasc0->membaseconfig0);
- writel(mem->membaseconfig0, &exynos_tzasc1->membaseconfig0);
+ write32(&exynos_tzasc0->membaseconfig0, mem->membaseconfig0);
+ write32(&exynos_tzasc1->membaseconfig0, mem->membaseconfig0);
/* MEMBASECONFIG1 (CS1) */
if (mem->chips_per_channel == 2) {
- writel(mem->membaseconfig1, &exynos_tzasc0->membaseconfig1);
- writel(mem->membaseconfig1, &exynos_tzasc1->membaseconfig1);
+ write32(&exynos_tzasc0->membaseconfig1, mem->membaseconfig1);
+ write32(&exynos_tzasc1->membaseconfig1, mem->membaseconfig1);
}
/* Memory Channel Interleaving Size
* Exynos5420 Channel interleaving = 128 bytes
*/
/* MEMCONFIG0/1 */
- writel(mem->memconfig, &exynos_tzasc0->memconfig0);
- writel(mem->memconfig, &exynos_tzasc1->memconfig0);
- writel(mem->memconfig, &exynos_tzasc0->memconfig1);
- writel(mem->memconfig, &exynos_tzasc1->memconfig1);
+ write32(&exynos_tzasc0->memconfig0, mem->memconfig);
+ write32(&exynos_tzasc1->memconfig0, mem->memconfig);
+ write32(&exynos_tzasc0->memconfig1, mem->memconfig);
+ write32(&exynos_tzasc1->memconfig1, mem->memconfig);
/* Precharge Configuration */
- writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
- &exynos_drex0->prechconfig0);
- writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
- &exynos_drex1->prechconfig0);
+ write32(&exynos_drex0->prechconfig0,
+ mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT);
+ write32(&exynos_drex1->prechconfig0,
+ mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT);
/* TimingRow, TimingData, TimingPower and Timingref
* values as per Memory AC parameters
*/
- writel(mem->timing_ref, &exynos_drex0->timingref);
- writel(mem->timing_ref, &exynos_drex1->timingref);
- writel(mem->timing_row, &exynos_drex0->timingrow);
- writel(mem->timing_row, &exynos_drex1->timingrow);
- writel(mem->timing_data, &exynos_drex0->timingdata);
- writel(mem->timing_data, &exynos_drex1->timingdata);
- writel(mem->timing_power, &exynos_drex0->timingpower);
- writel(mem->timing_power, &exynos_drex1->timingpower);
+ write32(&exynos_drex0->timingref, mem->timing_ref);
+ write32(&exynos_drex1->timingref, mem->timing_ref);
+ write32(&exynos_drex0->timingrow, mem->timing_row);
+ write32(&exynos_drex1->timingrow, mem->timing_row);
+ write32(&exynos_drex0->timingdata, mem->timing_data);
+ write32(&exynos_drex1->timingdata, mem->timing_data);
+ write32(&exynos_drex0->timingpower, mem->timing_power);
+ write32(&exynos_drex1->timingpower, mem->timing_power);
if (reset) {
/* Send NOP, MRS and ZQINIT commands.
@@ -189,8 +185,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
* release pad retention and retain the memory content until the
* initialization is complete.
*/
- writel(PAD_RETENTION_DRAM_COREBLK_VAL,
- &exynos_power->padret_dram_cblk_opt);
+ write32(&exynos_power->padret_dram_cblk_opt,
+ PAD_RETENTION_DRAM_COREBLK_VAL);
do {
ret = read32(&exynos_power->padret_dram_status);
} while (ret != 0x1);
@@ -201,57 +197,55 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
*/
for (i = 0; i < 128; i++) {
for (chip = 0; chip < mem->chips_to_configure; chip++) {
- writel(DIRECT_CMD_REFA |
- (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex0->directcmd);
- writel(DIRECT_CMD_REFA |
- (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex1->directcmd);
+ write32(&exynos_drex0->directcmd,
+ DIRECT_CMD_REFA | (chip << DIRECT_CMD_CHIP_SHIFT));
+ write32(&exynos_drex1->directcmd,
+ DIRECT_CMD_REFA | (chip << DIRECT_CMD_CHIP_SHIFT));
}
}
}
if (mem->gate_leveling_enable) {
- writel(PHY_CON0_RESET_VAL, &exynos_phy0_control->phy_con0);
- writel(PHY_CON0_RESET_VAL, &exynos_phy1_control->phy_con0);
+ write32(&exynos_phy0_control->phy_con0, PHY_CON0_RESET_VAL);
+ write32(&exynos_phy1_control->phy_con0, PHY_CON0_RESET_VAL);
setbits_le32(&exynos_phy0_control->phy_con0, P0_CMD_EN);
setbits_le32(&exynos_phy1_control->phy_con0, P0_CMD_EN);
val = PHY_CON2_RESET_VAL;
val |= INIT_DESKEW_EN;
- writel(val, &exynos_phy0_control->phy_con2);
- writel(val, &exynos_phy1_control->phy_con2);
+ write32(&exynos_phy0_control->phy_con2, val);
+ write32(&exynos_phy1_control->phy_con2, val);
- val = readl(&exynos_phy0_control->phy_con1);
+ val = read32(&exynos_phy0_control->phy_con1);
val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
- writel(val, &exynos_phy0_control->phy_con1);
+ write32(&exynos_phy0_control->phy_con1, val);
- val = readl(&exynos_phy1_control->phy_con1);
+ val = read32(&exynos_phy1_control->phy_con1);
val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
- writel(val, &exynos_phy1_control->phy_con1);
+ write32(&exynos_phy1_control->phy_con1, val);
- nLockR = readl(&exynos_phy0_control->phy_con13);
+ nLockR = read32(&exynos_phy0_control->phy_con13);
nLockW_phy0 = (nLockR & CTRL_LOCK_COARSE_MASK) >> 2;
- nLockR = readl(&exynos_phy0_control->phy_con12);
+ nLockR = read32(&exynos_phy0_control->phy_con12);
nLockR &= ~CTRL_DLL_ON;
nLockR |= nLockW_phy0;
- writel(nLockR, &exynos_phy0_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12, nLockR);
- nLockR = readl(&exynos_phy1_control->phy_con13);
+ nLockR = read32(&exynos_phy1_control->phy_con13);
nLockW_phy1 = (nLockR & CTRL_LOCK_COARSE_MASK) >> 2;
- nLockR = readl(&exynos_phy1_control->phy_con12);
+ nLockR = read32(&exynos_phy1_control->phy_con12);
nLockR &= ~CTRL_DLL_ON;
nLockR |= nLockW_phy1;
- writel(nLockR, &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy1_control->phy_con12, nLockR);
val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4;
for (chip = 0; chip < mem->chips_to_configure; chip++) {
- writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex0->directcmd);
- writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex1->directcmd);
+ write32(&exynos_drex0->directcmd,
+ val | (chip << DIRECT_CMD_CHIP_SHIFT));
+ write32(&exynos_drex1->directcmd,
+ val | (chip << DIRECT_CMD_CHIP_SHIFT));
}
setbits_le32(&exynos_phy0_control->phy_con2, RDLVL_GATE_EN);
@@ -260,17 +254,17 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
setbits_le32(&exynos_phy0_control->phy_con0, CTRL_SHGATE);
setbits_le32(&exynos_phy1_control->phy_con0, CTRL_SHGATE);
- val = readl(&exynos_phy0_control->phy_con1);
+ val = read32(&exynos_phy0_control->phy_con1);
val &= ~(CTRL_GATEDURADJ_MASK);
- writel(val, &exynos_phy0_control->phy_con1);
+ write32(&exynos_phy0_control->phy_con1, val);
- val = readl(&exynos_phy1_control->phy_con1);
+ val = read32(&exynos_phy1_control->phy_con1);
val &= ~(CTRL_GATEDURADJ_MASK);
- writel(val, &exynos_phy1_control->phy_con1);
+ write32(&exynos_phy1_control->phy_con1, val);
- writel(CTRL_RDLVL_GATE_ENABLE, &exynos_drex0->rdlvl_config);
+ write32(&exynos_drex0->rdlvl_config, CTRL_RDLVL_GATE_ENABLE);
i = TIMEOUT;
- while (((readl(&exynos_drex0->phystatus) & RDLVL_COMPLETE_CHO)
+ while (((read32(&exynos_drex0->phystatus) & RDLVL_COMPLETE_CHO)
!= RDLVL_COMPLETE_CHO) && (i > 0)) {
/*
* TODO(waihong): Comment on how long this take to
@@ -281,11 +275,11 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
}
if (!i)
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
- writel(CTRL_RDLVL_GATE_DISABLE, &exynos_drex0->rdlvl_config);
+ write32(&exynos_drex0->rdlvl_config, CTRL_RDLVL_GATE_DISABLE);
- writel(CTRL_RDLVL_GATE_ENABLE, &exynos_drex1->rdlvl_config);
+ write32(&exynos_drex1->rdlvl_config, CTRL_RDLVL_GATE_ENABLE);
i = TIMEOUT;
- while (((readl(&exynos_drex1->phystatus) & RDLVL_COMPLETE_CHO)
+ while (((read32(&exynos_drex1->phystatus) & RDLVL_COMPLETE_CHO)
!= RDLVL_COMPLETE_CHO) && (i > 0)) {
/*
* TODO(waihong): Comment on how long this take to
@@ -296,23 +290,23 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
}
if (!i)
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
- writel(CTRL_RDLVL_GATE_DISABLE, &exynos_drex1->rdlvl_config);
+ write32(&exynos_drex1->rdlvl_config, CTRL_RDLVL_GATE_DISABLE);
- writel(0, &exynos_phy0_control->phy_con14);
- writel(0, &exynos_phy1_control->phy_con14);
+ write32(&exynos_phy0_control->phy_con14, 0);
+ write32(&exynos_phy1_control->phy_con14, 0);
val = (0x3 << DIRECT_CMD_BANK_SHIFT);
for (chip = 0; chip < mem->chips_to_configure; chip++) {
- writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex0->directcmd);
- writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex1->directcmd);
+ write32(&exynos_drex0->directcmd,
+ val | (chip << DIRECT_CMD_CHIP_SHIFT));
+ write32(&exynos_drex1->directcmd,
+ val | (chip << DIRECT_CMD_CHIP_SHIFT));
}
/* Common Settings for Leveling */
val = PHY_CON12_RESET_VAL;
- writel((val + nLockW_phy0), &exynos_phy0_control->phy_con12);
- writel((val + nLockW_phy1), &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12, (val + nLockW_phy0));
+ write32(&exynos_phy1_control->phy_con12, (val + nLockW_phy1));
setbits_le32(&exynos_phy0_control->phy_con2, DLL_DESKEW_EN);
setbits_le32(&exynos_phy1_control->phy_con2, DLL_DESKEW_EN);
@@ -322,22 +316,18 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
dmc_config_prech(mem, exynos_drex0);
dmc_config_prech(mem, exynos_drex1);
- writel(mem->memcontrol, &exynos_drex0->memcontrol);
- writel(mem->memcontrol, &exynos_drex1->memcontrol);
+ write32(&exynos_drex0->memcontrol, mem->memcontrol);
+ write32(&exynos_drex1->memcontrol, mem->memcontrol);
/*
* Set DMC Concontrol: Enable auto-refresh counter, provide
* read data fetch cycles and enable DREX auto set powerdown
* for input buffer of I/O in none read memory state.
*/
- writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
- (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
- DMC_CONCONTROL_IO_PD_CON(0x2),
- &exynos_drex0->concontrol);
- writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
- (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
- DMC_CONCONTROL_IO_PD_CON(0x2),
- &exynos_drex1->concontrol);
+ write32(&exynos_drex0->concontrol,
+ mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | DMC_CONCONTROL_IO_PD_CON(0x2));
+ write32(&exynos_drex1->concontrol,
+ mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | DMC_CONCONTROL_IO_PD_CON(0x2));
/* Enable Clock Gating Control for DMC
* this saves around 25 mw dmc power as compared to the power
diff --git a/src/soc/samsung/exynos5420/dp_lowlevel.c b/src/soc/samsung/exynos5420/dp_lowlevel.c
index 5a3adf907e..f56148fec3 100644
--- a/src/soc/samsung/exynos5420/dp_lowlevel.c
+++ b/src/soc/samsung/exynos5420/dp_lowlevel.c
@@ -55,7 +55,7 @@ static inline unsigned long fradl(void *v) {
#define lread32(a) fradl((void *)(a))
#else
-#define lwrite32(a,b) writel((unsigned long)(a), (void *)(b))
+#define lwrite32(a,b) write32((void *)(b), (unsigned long)(a))
#define lread32(a) read32((void *)(a))
#endif
diff --git a/src/soc/samsung/exynos5420/fimd.c b/src/soc/samsung/exynos5420/fimd.c
index dfd123254c..8059f49f1a 100644
--- a/src/soc/samsung/exynos5420/fimd.c
+++ b/src/soc/samsung/exynos5420/fimd.c
@@ -47,8 +47,8 @@ static inline unsigned long fradl(void *v) {
#define lreadl(a) fradl((void *)(a))
#else
-#define lwritel(a,b) writel((unsigned long)(a), (void *)(b))
-#define lreadl(a) readl((void *)(a))
+#define lwritel(a,b) write32((void *)(b), (unsigned long)(a))
+#define lreadl(a) read32((void *)(a))
#endif
/* not sure where we want this so ... */
diff --git a/src/soc/samsung/exynos5420/gpio.c b/src/soc/samsung/exynos5420/gpio.c
index 92cdc28fc0..0a53018b3f 100644
--- a/src/soc/samsung/exynos5420/gpio.c
+++ b/src/soc/samsung/exynos5420/gpio.c
@@ -82,10 +82,10 @@ void gpio_cfg_pin(int gpio, int cfg)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->con);
+ value = read32(&bank->con);
value &= ~CON_MASK(GPIO_BIT(gpio));
value |= CON_SFR(GPIO_BIT(gpio), cfg);
- writel(value, &bank->con);
+ write32(&bank->con, value);
}
static int gpio_get_cfg(int gpio)
@@ -93,7 +93,7 @@ static int gpio_get_cfg(int gpio)
struct gpio_bank *bank = gpio_get_bank(gpio);
int shift = GPIO_BIT(gpio) << 2;
- return (readl(&bank->con) & CON_MASK(GPIO_BIT(gpio))) >> shift;
+ return (read32(&bank->con) & CON_MASK(GPIO_BIT(gpio))) >> shift;
}
void gpio_set_pull(int gpio, int mode)
@@ -101,7 +101,7 @@ void gpio_set_pull(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->pull);
+ value = read32(&bank->pull);
value &= ~PULL_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -113,7 +113,7 @@ void gpio_set_pull(int gpio, int mode)
break;
}
- writel(value, &bank->pull);
+ write32(&bank->pull, value);
}
void gpio_set_drv(int gpio, int mode)
@@ -121,7 +121,7 @@ void gpio_set_drv(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->drv);
+ value = read32(&bank->drv);
value &= ~DRV_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -135,7 +135,7 @@ void gpio_set_drv(int gpio, int mode)
return;
}
- writel(value, &bank->drv);
+ write32(&bank->drv, value);
}
void gpio_set_rate(int gpio, int mode)
@@ -143,7 +143,7 @@ void gpio_set_rate(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->drv);
+ value = read32(&bank->drv);
value &= ~RATE_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -155,7 +155,7 @@ void gpio_set_rate(int gpio, int mode)
return;
}
- writel(value, &bank->drv);
+ write32(&bank->drv, value);
}
int gpio_direction_input(unsigned gpio)
@@ -170,11 +170,11 @@ int gpio_direction_output(unsigned gpio, int value)
unsigned int val;
struct gpio_bank *bank = gpio_get_bank(gpio);
- val = readl(&bank->dat);
+ val = read32(&bank->dat);
val &= ~DAT_MASK(GPIO_BIT(gpio));
if (value)
val |= DAT_SET(GPIO_BIT(gpio));
- writel(val, &bank->dat);
+ write32(&bank->dat, val);
gpio_cfg_pin(gpio, GPIO_OUTPUT);
@@ -186,7 +186,7 @@ int gpio_get_value(unsigned gpio)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->dat);
+ value = read32(&bank->dat);
return !!(value & DAT_MASK(GPIO_BIT(gpio)));
}
@@ -195,11 +195,11 @@ int gpio_set_value(unsigned gpio, int value)
unsigned int val;
struct gpio_bank *bank = gpio_get_bank(gpio);
- val = readl(&bank->dat);
+ val = read32(&bank->dat);
val &= ~DAT_MASK(GPIO_BIT(gpio));
if (value)
val |= DAT_SET(GPIO_BIT(gpio));
- writel(val, &bank->dat);
+ write32(&bank->dat, val);
return 0;
}
diff --git a/src/soc/samsung/exynos5420/i2c.c b/src/soc/samsung/exynos5420/i2c.c
index 28e3f0c331..1b541b7326 100644
--- a/src/soc/samsung/exynos5420/i2c.c
+++ b/src/soc/samsung/exynos5420/i2c.c
@@ -270,7 +270,7 @@ static int hsi2c_get_clk_details(struct i2c_bus *i2c, int *div, int *cycle,
* temp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2)
* temp1 = (TSCLK_L + TSCLK_H + 2)
*/
- uint32_t flt_cycle = (readl(&regs->i2c_conf) >> 16) & 0x7;
+ uint32_t flt_cycle = (read32(&regs->i2c_conf) >> 16) & 0x7;
int temp = (clkin / op_clk) - 8 - 2 * flt_cycle;
// CLK_DIV max is 256.
@@ -310,18 +310,18 @@ static void hsi2c_ch_init(struct i2c_bus *i2c, unsigned int frequency)
uint32_t timing_sla = data_hd << 0;
// Currently operating in fast speed mode.
- writel(timing_fs1, &regs->i2c_timing_fs1);
- writel(timing_fs2, &regs->i2c_timing_fs2);
- writel(timing_fs3, &regs->i2c_timing_fs3);
- writel(timing_sla, &regs->i2c_timing_sla);
+ write32(&regs->i2c_timing_fs1, timing_fs1);
+ write32(&regs->i2c_timing_fs2, timing_fs2);
+ write32(&regs->i2c_timing_fs3, timing_fs3);
+ write32(&regs->i2c_timing_sla, timing_sla);
// Clear to enable timeout.
- writel(readl(&regs->i2c_timeout) & ~Hsi2cTimeoutEn,
- &regs->i2c_timeout);
+ write32(&regs->i2c_timeout,
+ read32(&regs->i2c_timeout) & ~Hsi2cTimeoutEn);
- writel(Hsi2cTrailingCount, &regs->usi_trailing_ctl);
- writel(Hsi2cRxfifoEn | Hsi2cTxfifoEn, &regs->usi_fifo_ctl);
- writel(readl(&regs->i2c_conf) | Hsi2cAutoMode, &regs->i2c_conf);
+ write32(&regs->usi_trailing_ctl, Hsi2cTrailingCount);
+ write32(&regs->usi_fifo_ctl, Hsi2cRxfifoEn | Hsi2cTxfifoEn);
+ write32(&regs->i2c_conf, read32(&regs->i2c_conf) | Hsi2cAutoMode);
}
static void hsi2c_reset(struct i2c_bus *i2c)
@@ -329,8 +329,8 @@ static void hsi2c_reset(struct i2c_bus *i2c)
struct hsi2c_regs *regs = i2c->hsregs;
// Set and clear the bit for reset.
- writel(readl(&regs->usi_ctl) | Hsi2cSwRst, &regs->usi_ctl);
- writel(readl(&regs->usi_ctl) & ~Hsi2cSwRst, &regs->usi_ctl);
+ write32(&regs->usi_ctl, read32(&regs->usi_ctl) | Hsi2cSwRst);
+ write32(&regs->usi_ctl, read32(&regs->usi_ctl) & ~Hsi2cSwRst);
/* FIXME: This just assumes 100KHz as a default bus freq */
hsi2c_ch_init(i2c, 100000);
@@ -356,13 +356,13 @@ static void i2c_ch_init(struct i2c_bus *i2c, int speed)
// Set prescaler, divisor according to freq, also set ACKGEN, IRQ.
val = (div & 0x0f) | 0xa0 | ((pres == 512) ? 0x40 : 0);
- writel(val, &regs->con);
+ write32(&regs->con, val);
// Init to SLAVE RECEIVE mode and clear I2CADDn.
- writel(0, &regs->stat);
- writel(0, &regs->add);
+ write32(&regs->stat, 0);
+ write32(&regs->add, 0);
// program Master Transmit (and implicit STOP).
- writel(I2cStatMasterXmit | I2cStatEnable, &regs->stat);
+ write32(&regs->stat, I2cStatMasterXmit | I2cStatEnable);
}
void i2c_init(unsigned bus, int speed, int slaveadd)
@@ -430,7 +430,7 @@ static int hsi2c_senddata(struct hsi2c_regs *regs, const uint8_t *data, int len)
{
while (!hsi2c_check_transfer(regs) && len) {
if (!(read32(&regs->usi_fifo_stat) & Hsi2cTxFifoFull)) {
- writel(*data++, &regs->usi_txdata);
+ write32(&regs->usi_txdata, *data++);
len--;
}
}
@@ -452,7 +452,7 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop)
{
const uint32_t usi_ctl = Hsi2cFuncModeI2c | Hsi2cMaster;
- writel(HSI2C_SLV_ADDR_MAS(seg->chip), &regs->i2c_addr);
+ write32(&regs->i2c_addr, HSI2C_SLV_ADDR_MAS(seg->chip));
/*
* We really only want to stop after this transaction (I think) if the
@@ -465,14 +465,14 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop)
seg->len | Hsi2cMasterRun | Hsi2cStopAfterTrans;
if (seg->read) {
- writel(usi_ctl | Hsi2cRxchon, &regs->usi_ctl);
- writel(autoconf | Hsi2cReadWrite, &regs->i2c_auto_conf);
+ write32(&regs->usi_ctl, usi_ctl | Hsi2cRxchon);
+ write32(&regs->i2c_auto_conf, autoconf | Hsi2cReadWrite);
if (hsi2c_recvdata(regs, seg->buf, seg->len))
return -1;
} else {
- writel(usi_ctl | Hsi2cTxchon, &regs->usi_ctl);
- writel(autoconf, &regs->i2c_auto_conf);
+ write32(&regs->usi_ctl, usi_ctl | Hsi2cTxchon);
+ write32(&regs->i2c_auto_conf, autoconf);
if (hsi2c_senddata(regs, seg->buf, seg->len))
return -1;
@@ -481,7 +481,7 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop)
if (hsi2c_wait_for_transfer(regs) != 1)
return -1;
- writel(Hsi2cFuncModeI2c, &regs->usi_ctl);
+ write32(&regs->usi_ctl, Hsi2cFuncModeI2c);
return 0;
}
@@ -510,34 +510,34 @@ static int hsi2c_transfer(struct i2c_bus *i2c, struct i2c_seg *segments,
static int i2c_int_pending(struct i2c_regs *regs)
{
- return readb(&regs->con) & I2cConIntPending;
+ return read8(&regs->con) & I2cConIntPending;
}
static void i2c_clear_int(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) & ~I2cConIntPending, &regs->con);
+ write8(&regs->con, read8(&regs->con) & ~I2cConIntPending);
}
static void i2c_ack_enable(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) | I2cConAckGen, &regs->con);
+ write8(&regs->con, read8(&regs->con) | I2cConAckGen);
}
static void i2c_ack_disable(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) & ~I2cConAckGen, &regs->con);
+ write8(&regs->con, read8(&regs->con) & ~I2cConAckGen);
}
static int i2c_got_ack(struct i2c_regs *regs)
{
- return !(readb(&regs->stat) & I2cStatAck);
+ return !(read8(&regs->stat) & I2cStatAck);
}
static int i2c_wait_for_idle(struct i2c_regs *regs)
{
int timeout = 1000 * 100; // 1s.
while (timeout--) {
- if (!(readb(&regs->stat) & I2cStatBusy))
+ if (!(read8(&regs->stat) & I2cStatBusy))
return 0;
udelay(10);
}
@@ -562,17 +562,17 @@ static int i2c_wait_for_int(struct i2c_regs *regs)
static int i2c_send_stop(struct i2c_regs *regs)
{
- uint8_t mode = readb(&regs->stat) & (I2cStatModeMask);
- writeb(mode | I2cStatEnable, &regs->stat);
+ uint8_t mode = read8(&regs->stat) & (I2cStatModeMask);
+ write8(&regs->stat, mode | I2cStatEnable);
i2c_clear_int(regs);
return i2c_wait_for_idle(regs);
}
static int i2c_send_start(struct i2c_regs *regs, int read, int chip)
{
- writeb(chip << 1, &regs->ds);
+ write8(&regs->ds, chip << 1);
uint8_t mode = read ? I2cStatMasterRecv : I2cStatMasterXmit;
- writeb(mode | I2cStatStartStop | I2cStatEnable, &regs->stat);
+ write8(&regs->stat, mode | I2cStatStartStop | I2cStatEnable);
i2c_clear_int(regs);
if (i2c_wait_for_int(regs))
@@ -594,7 +594,7 @@ static int i2c_xmit_buf(struct i2c_regs *regs, uint8_t *data, int len)
int i;
for (i = 0; i < len; i++) {
- writeb(data[i], &regs->ds);
+ write8(&regs->ds, data[i]);
i2c_clear_int(regs);
if (i2c_wait_for_int(regs))
@@ -624,7 +624,7 @@ static int i2c_recv_buf(struct i2c_regs *regs, uint8_t *data, int len)
if (i2c_wait_for_int(regs))
return 1;
- data[i] = readb(&regs->ds);
+ data[i] = read8(&regs->ds);
}
return 0;
@@ -642,7 +642,7 @@ int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int count)
if (!regs || i2c_wait_for_idle(regs))
return 1;
- writeb(I2cStatMasterXmit | I2cStatEnable, &regs->stat);
+ write8(&regs->stat, I2cStatMasterXmit | I2cStatEnable);
int i;
for (i = 0; i < count; i++) {
diff --git a/src/soc/samsung/exynos5420/power.c b/src/soc/samsung/exynos5420/power.c
index c7d491dd23..1b8aaa67d1 100644
--- a/src/soc/samsung/exynos5420/power.c
+++ b/src/soc/samsung/exynos5420/power.c
@@ -89,5 +89,5 @@ void power_enable_xclkout(void)
void power_release_uart_retention(void)
{
- writel(1 << 28, &exynos_power->padret_uart_opt);
+ write32(&exynos_power->padret_uart_opt, 1 << 28);
}
diff --git a/src/soc/samsung/exynos5420/smp.c b/src/soc/samsung/exynos5420/smp.c
index 8775bc9baf..6c8fd06f20 100644
--- a/src/soc/samsung/exynos5420/smp.c
+++ b/src/soc/samsung/exynos5420/smp.c
@@ -152,7 +152,7 @@ static void enable_smp(void)
actlr |= ACTLR_SMP;
/* Dummy read to assure L2 access */
- val = readl(&exynos_power->inform0);
+ val = read32(&exynos_power->inform0);
val &= 0;
actlr |= val;
@@ -200,9 +200,9 @@ static void low_power_start(void)
/* On warm reset, because iRAM is not cleared, all cores will enter
* low_power_start, not the initial address. So we need to check reset
* status again, and jump to 0x0 in that case. */
- reg_val = readl(&exynos_power->spare0);
+ reg_val = read32(&exynos_power->spare0);
if (reg_val != RST_FLAG_VAL) {
- writel(0x0, VECTOR_LOW_POWER_FLAG);
+ write32(VECTOR_LOW_POWER_FLAG, 0x0);
jump_bx(CORE_RESET_INIT_ADDRESS);
/* restart cpu execution and never returns. */
}
@@ -211,9 +211,9 @@ static void low_power_start(void)
* path, bypassing first jump address and makes final jump address 0x0,
* so we try to make any core set again low_power_start address, if that
* becomes zero. */
- reg_val = readl(VECTOR_CORE_SEV_HANDLER);
+ reg_val = read32(VECTOR_CORE_SEV_HANDLER);
if (reg_val != (intptr_t)low_power_start) {
- writel((intptr_t)low_power_start, VECTOR_CORE_SEV_HANDLER);
+ write32(VECTOR_CORE_SEV_HANDLER, (intptr_t)low_power_start);
dsb();
/* ask all cores to power on again. */
sev();
@@ -258,7 +258,7 @@ static void power_down_core(void)
* S5E5420A User Manual, 8.8.1.202, ARM_CORE0_CONFIGURATION, two bits to
* control power state in each power down level.
*/
- writel(0x0, &exynos_power->arm_core[core_id].config);
+ write32(&exynos_power->arm_core[core_id].config, 0x0);
/* S5E5420A User Manual, 8.4.2.5, after ARM_CORE*_CONFIGURATION has been
* set to zero, PMU will detect and wait for WFI then run power-down
@@ -281,15 +281,15 @@ static void configure_secondary_cores(void)
* when we want to use SMP inside firmware. */
/* Clear boot reg (hotplug address) in cpu states */
- writel(0, (void*)&exynos_cpu_states->hotplug_address);
+ write32((void *)&exynos_cpu_states->hotplug_address, 0);
/* set low_power flag and address */
- writel((intptr_t)low_power_start, VECTOR_LOW_POWER_ADDRESS);
- writel(RST_FLAG_VAL, VECTOR_LOW_POWER_FLAG);
- writel(RST_FLAG_VAL, &exynos_power->spare0);
+ write32(VECTOR_LOW_POWER_ADDRESS, (intptr_t)low_power_start);
+ write32(VECTOR_LOW_POWER_FLAG, RST_FLAG_VAL);
+ write32(&exynos_power->spare0, RST_FLAG_VAL);
/* On next SEV, shutdown all cores. */
- writel((intptr_t)power_down_core, VECTOR_CORE_SEV_HANDLER);
+ write32(VECTOR_CORE_SEV_HANDLER, (intptr_t)power_down_core);
/* Ask all cores in WFE mode to shutdown. */
dsb();
diff --git a/src/soc/samsung/exynos5420/spi.c b/src/soc/samsung/exynos5420/spi.c
index 6ceb92edd2..3d71f79529 100644
--- a/src/soc/samsung/exynos5420/spi.c
+++ b/src/soc/samsung/exynos5420/spi.c
@@ -69,9 +69,9 @@ static inline struct exynos_spi_slave *to_exynos_spi(struct spi_slave *slave)
static void spi_sw_reset(struct exynos_spi *regs, int word)
{
- const uint32_t orig_mode_cfg = readl(&regs->mode_cfg);
+ const uint32_t orig_mode_cfg = read32(&regs->mode_cfg);
uint32_t mode_cfg = orig_mode_cfg;
- const uint32_t orig_swap_cfg = readl(&regs->swap_cfg);
+ const uint32_t orig_swap_cfg = read32(&regs->swap_cfg);
uint32_t swap_cfg = orig_swap_cfg;
mode_cfg &= ~(SPI_MODE_CH_WIDTH_MASK | SPI_MODE_BUS_WIDTH_MASK);
@@ -89,9 +89,9 @@ static void spi_sw_reset(struct exynos_spi *regs, int word)
}
if (mode_cfg != orig_mode_cfg)
- writel(mode_cfg, &regs->mode_cfg);
+ write32(&regs->mode_cfg, mode_cfg);
if (swap_cfg != orig_swap_cfg)
- writel(swap_cfg, &regs->swap_cfg);
+ write32(&regs->swap_cfg, swap_cfg);
clrbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON);
setbits_le32(&regs->ch_cfg, SPI_CH_RST);
@@ -106,7 +106,7 @@ void spi_init(void)
static void exynos_spi_init(struct exynos_spi *regs)
{
// Set FB_CLK_SEL.
- writel(SPI_FB_DELAY_180, &regs->fb_clk);
+ write32(&regs->fb_clk, SPI_FB_DELAY_180);
// CPOL: Active high.
clrbits_le32(&regs->ch_cfg, SPI_CH_CPOL_L);
@@ -157,10 +157,10 @@ static void spi_transfer(struct exynos_spi *regs, void *in, const void *out,
out_bytes = in_bytes = packets * width;
spi_sw_reset(regs, width == 4);
- writel(packets | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+ write32(&regs->pkt_cnt, packets | SPI_PACKET_CNT_EN);
while (out_bytes || in_bytes) {
- uint32_t spi_sts = readl(&regs->spi_sts);
+ uint32_t spi_sts = read32(&regs->spi_sts);
int rx_lvl = ((spi_sts >> 15) & 0x1ff);
int tx_lvl = ((spi_sts >> 6) & 0x1ff);
@@ -171,13 +171,13 @@ static void spi_transfer(struct exynos_spi *regs, void *in, const void *out,
memcpy(&data, outb, width);
outb += width;
}
- writel(data, &regs->tx_data);
+ write32(&regs->tx_data, data);
out_bytes -= width;
}
if (rx_lvl >= width) {
- uint32_t data = readl(&regs->rx_data);
+ uint32_t data = read32(&regs->rx_data);
if (inb) {
memcpy(inb, &data, width);
diff --git a/src/soc/samsung/exynos5420/timer.c b/src/soc/samsung/exynos5420/timer.c
index 1e25771dbd..2abaf3bc5d 100644
--- a/src/soc/samsung/exynos5420/timer.c
+++ b/src/soc/samsung/exynos5420/timer.c
@@ -27,16 +27,15 @@ static const uint32_t clocks_per_usec = MCT_HZ/1000000;
static uint64_t mct_raw_value(void)
{
- uint64_t upper = readl(&exynos_mct->g_cnt_u);
- uint64_t lower = readl(&exynos_mct->g_cnt_l);
+ uint64_t upper = read32(&exynos_mct->g_cnt_u);
+ uint64_t lower = read32(&exynos_mct->g_cnt_l);
return (upper << 32) | lower;
}
void init_timer(void)
{
- writel(readl(&exynos_mct->g_tcon) | (0x1 << 8),
- &exynos_mct->g_tcon);
+ write32(&exynos_mct->g_tcon, read32(&exynos_mct->g_tcon) | (0x1 << 8));
}
void timer_monotonic_get(struct mono_time *mt)
diff --git a/src/soc/samsung/exynos5420/tmu.c b/src/soc/samsung/exynos5420/tmu.c
index 8ed78bba4a..19c72fdac3 100644
--- a/src/soc/samsung/exynos5420/tmu.c
+++ b/src/soc/samsung/exynos5420/tmu.c
@@ -80,7 +80,7 @@ static int get_cur_temp(struct tmu_info *info)
struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
/* Temperature code range between min 25 and max 125 */
- cur_temp = readl(&reg->current_temp) & 0xff;
+ cur_temp = read32(&reg->current_temp) & 0xff;
/* Calibrate current temperature */
if (cur_temp)
@@ -142,10 +142,10 @@ static void tmu_setup_parameters(struct tmu_info *info)
struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
/* Must reload for using efuse value at EXYNOS */
- writel(TRIMINFO_RELOAD, &reg->triminfo_control);
+ write32(&reg->triminfo_control, TRIMINFO_RELOAD);
/* Get the compensation parameter */
- te_temp = readl(&reg->triminfo);
+ te_temp = read32(&reg->triminfo);
info->te1 = te_temp & TRIM_INFO_MASK;
info->te2 = ((te_temp >> 8) & TRIM_INFO_MASK);
@@ -169,8 +169,8 @@ static void tmu_setup_parameters(struct tmu_info *info)
(hwtrip_code << 24));
/* Set interrupt level */
- writel(rising_value, &reg->threshold_temp_rise);
- writel(cooling_temp, &reg->threshold_temp_fall);
+ write32(&reg->threshold_temp_rise, rising_value);
+ write32(&reg->threshold_temp_fall, cooling_temp);
/*
* Need to init all register settings after getting parameter info
@@ -183,20 +183,20 @@ static void tmu_setup_parameters(struct tmu_info *info)
* TODO(bhthompson): rewrite this code such that we are not performing
* a hard wipe of tmu_control and re verify functionality.
*/
- writel(data->slope, &reg->tmu_control);
+ write32(&reg->tmu_control, data->slope);
- writel(INTCLEARALL, &reg->intclear);
+ write32(&reg->intclear, INTCLEARALL);
/* TMU core enable */
- con = readl(&reg->tmu_control);
+ con = read32(&reg->tmu_control);
con |= (info->tmu_mux << 20) | THERM_TRIP_EN | CORE_EN;
- writel(con, &reg->tmu_control);
+ write32(&reg->tmu_control, con);
/* Enable HW thermal trip */
power_enable_hw_thermal_trip();
/* LEV1 LEV2 interrupt enable */
- writel(INTEN_RISE1 | INTEN_RISE2, &reg->inten);
+ write32(&reg->inten, INTEN_RISE1 | INTEN_RISE2);
}
/*
diff --git a/src/soc/samsung/exynos5420/trustzone.c b/src/soc/samsung/exynos5420/trustzone.c
index 983690dbef..5712768355 100644
--- a/src/soc/samsung/exynos5420/trustzone.c
+++ b/src/soc/samsung/exynos5420/trustzone.c
@@ -33,10 +33,10 @@ void trustzone_init(void)
for (addr = TZPC10_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) {
tzpc = (struct exynos_tzpc *)addr;
if (addr == TZPC0_BASE)
- writel(R0SIZE, &tzpc->r0size);
- writel(DECPROTXSET, &tzpc->decprot0set);
- writel(DECPROTXSET, &tzpc->decprot1set);
- writel(DECPROTXSET, &tzpc->decprot2set);
- writel(DECPROTXSET, &tzpc->decprot3set);
+ write32(&tzpc->r0size, R0SIZE);
+ write32(&tzpc->decprot0set, DECPROTXSET);
+ write32(&tzpc->decprot1set, DECPROTXSET);
+ write32(&tzpc->decprot2set, DECPROTXSET);
+ write32(&tzpc->decprot3set, DECPROTXSET);
}
}
diff --git a/src/soc/samsung/exynos5420/uart.c b/src/soc/samsung/exynos5420/uart.c
index 74e5067b0d..bfdd54a891 100644
--- a/src/soc/samsung/exynos5420/uart.c
+++ b/src/soc/samsung/exynos5420/uart.c
@@ -66,7 +66,7 @@ static void serial_setbrg_dev(struct s5p_uart *uart)
uclk = clock_get_periph_rate(PERIPH_ID_UART3);
val = uclk / default_baudrate();
- writel(val / 16 - 1, &uart->ubrdiv);
+ write32(&uart->ubrdiv, val / 16 - 1);
/*
* FIXME(dhendrix): the original uart.h had a "br_rest" value which
@@ -88,12 +88,12 @@ static void serial_setbrg_dev(struct s5p_uart *uart)
static void exynos5_init_dev(struct s5p_uart *uart)
{
/* enable FIFOs */
- writel(0x1, &uart->ufcon);
- writel(0, &uart->umcon);
+ write32(&uart->ufcon, 0x1);
+ write32(&uart->umcon, 0);
/* 8N1 */
- writel(0x3, &uart->ulcon);
+ write32(&uart->ulcon, 0x3);
/* No interrupts, no DMA, pure polling */
- writel(0x245, &uart->ucon);
+ write32(&uart->ucon, 0x245);
serial_setbrg_dev(uart);
}
@@ -114,7 +114,7 @@ static int exynos5_uart_err_check(struct s5p_uart *uart, int op)
else
mask = 0xf;
- return readl(&uart->uerstat) & mask;
+ return read32(&uart->uerstat) & mask;
}
/*
@@ -125,13 +125,13 @@ static int exynos5_uart_err_check(struct s5p_uart *uart, int op)
static unsigned char exynos5_uart_rx_byte(struct s5p_uart *uart)
{
/* wait for character to arrive */
- while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
+ while (!(read32(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
RX_FIFO_FULL_MASK))) {
if (exynos5_uart_err_check(uart, 0))
return 0;
}
- return readb(&uart->urxh) & 0xff;
+ return read8(&uart->urxh) & 0xff;
}
/*
@@ -140,12 +140,12 @@ static unsigned char exynos5_uart_rx_byte(struct s5p_uart *uart)
static void exynos5_uart_tx_byte(struct s5p_uart *uart, unsigned char data)
{
/* wait for room in the tx FIFO */
- while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
+ while ((read32(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
if (exynos5_uart_err_check(uart, 1))
return;
}
- writeb(data, &uart->utxh);
+ write8(&uart->utxh, data);
}
uintptr_t uart_platform_base(int idx)
diff --git a/src/soc/samsung/exynos5420/usb.c b/src/soc/samsung/exynos5420/usb.c
index 0df63e2666..9313fea147 100644
--- a/src/soc/samsung/exynos5420/usb.c
+++ b/src/soc/samsung/exynos5420/usb.c
@@ -57,23 +57,13 @@ static void setup_dwc3(struct exynos5_usb_drd_dwc3 *dwc3)
/* Set relevant registers to default values (clearing all reset bits) */
- writel(0x1 << 24 | /* activate PHY low power states */
- 0x4 << 19 | /* low power delay value */
- 0x1 << 18 | /* activate PHY low power delay */
- 0x1 << 17 | /* enable SuperSpeed PHY suspend */
- 0x1 << 1 | /* default Tx deemphasis value */
- 0, &dwc3->usb3pipectl);
+ write32(&dwc3->usb3pipectl,
+ 0x1 << 24 | 0x4 << 19 | 0x1 << 18 | 0x1 << 17 | 0x1 << 1 | 0);
/* Configure PHY clock turnaround for 8-bit UTMI+, disable suspend */
- writel(0x9 << 10 | /* PHY clock turnaround for 8-bit UTMI+ */
- 0x1 << 8 | /* enable PHY sleep in L1 */
- 0x1 << 6 | /* enable PHY suspend */
- 0, &dwc3->usb2phycfg);
-
- writel(0x5dc << 19 | /* suspend clock scale for 24MHz */
- 0x1 << 16 | /* retry SS three times (bugfix from U-Boot) */
- 0x1 << 12 | /* port capability HOST */
- 0, &dwc3->ctl);
+ write32(&dwc3->usb2phycfg, 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0);
+
+ write32(&dwc3->ctl, 0x5dc << 19 | 0x1 << 16 | 0x1 << 12 | 0);
}
void setup_usb_drd0_dwc3()
@@ -96,44 +86,25 @@ static void setup_drd_phy(struct exynos5_usb_drd_phy *phy)
setbits_le32(&phy->linksystem, 0x1 << 27 | 0x20 << 1);
/* Disable OTG, ID0 and DRVVBUS, do not force sleep/suspend */
- writel(1 << 6, &phy->utmi);
-
- writel(0x88 << 23 | /* spread spectrum refclk selector */
- 0x1 << 20 | /* enable spread spectrum */
- 0x1 << 19 | /* enable prescaler refclk */
- 0x68 << 11 | /* multiplier for 24MHz refclk */
- 0x5 << 5 | /* select 24MHz refclk (weird, from U-Boot) */
- 0x1 << 4 | /* power supply in normal operating mode */
- 0x3 << 2 | /* use external refclk (undocumented on 5420?)*/
- 0x1 << 1 | /* force port reset */
- 0x1 << 0 | /* normal operating mode */
- 0, &phy->clkrst);
-
- writel(0x9 << 26 | /* LOS level */
- 0x3 << 22 | /* TX VREF tune */
- 0x1 << 20 | /* TX rise tune */
- 0x1 << 18 | /* TX res tune */
- 0x3 << 13 | /* TX HS X Vtune */
- 0x3 << 9 | /* TX FS/LS tune */
- 0x3 << 6 | /* SQRX tune */
- 0x4 << 3 | /* OTG tune */
- 0x4 << 0 | /* comp disc tune */
- 0, &phy->param0);
-
- writel(0x7f << 19 | /* reserved */
- 0x7f << 12 | /* Tx launch amplitude */
- 0x20 << 6 | /* Tx deemphasis 6dB */
- 0x1c << 0 | /* Tx deemphasis 3.5dB (value from U-Boot) */
- 0, &phy->param1);
+ write32(&phy->utmi, 1 << 6);
+
+ write32(&phy->clkrst,
+ 0x88 << 23 | 0x1 << 20 | 0x1 << 19 | 0x68 << 11 | 0x5 << 5 | 0x1 << 4 | 0x3 << 2 | 0x1 << 1 | 0x1 << 0 | 0);
+
+ write32(&phy->param0,
+ 0x9 << 26 | 0x3 << 22 | 0x1 << 20 | 0x1 << 18 | 0x3 << 13 | 0x3 << 9 | 0x3 << 6 | 0x4 << 3 | 0x4 << 0 | 0);
+
+ write32(&phy->param1,
+ 0x7f << 19 | 0x7f << 12 | 0x20 << 6 | 0x1c << 0 | 0);
/* disable all test features */
- writel(0, &phy->test);
+ write32(&phy->test, 0);
/* UTMI clock select? ("must be 0x1") */
- writel(0x1 << 2, &phy->utmiclksel);
+ write32(&phy->utmiclksel, 0x1 << 2);
/* Samsung magic, undocumented (from U-Boot) */
- writel(0x0, &phy->resume);
+ write32(&phy->resume, 0x0);
udelay(10);
clrbits_le32(&phy->clkrst, 0x1 << 1); /* deassert port reset */
@@ -163,7 +134,7 @@ void setup_usb_host_phy(int hsic_gpio)
printk(BIOS_DEBUG, "Powering up USB HOST PHY (%s HSIC)\n",
hsic_gpio ? "with" : "without");
- hostphy_ctrl0 = readl(&exynos_usb_host_phy->usbphyctrl0);
+ hostphy_ctrl0 = read32(&exynos_usb_host_phy->usbphyctrl0);
hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK |
HOST_CTRL0_COMMONON_N |
/* HOST Phy setting */
@@ -177,7 +148,7 @@ void setup_usb_host_phy(int hsic_gpio)
/* HOST Phy setting */
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
- writel(hostphy_ctrl0, &exynos_usb_host_phy->usbphyctrl0);
+ write32(&exynos_usb_host_phy->usbphyctrl0, hostphy_ctrl0);
udelay(10);
clrbits_le32(&exynos_usb_host_phy->usbphyctrl0,
HOST_CTRL0_LINKSWRST |
diff --git a/src/vendorcode/google/chromeos/watchdog.c b/src/vendorcode/google/chromeos/watchdog.c
index e4adf8a041..3f17116c30 100644
--- a/src/vendorcode/google/chromeos/watchdog.c
+++ b/src/vendorcode/google/chromeos/watchdog.c
@@ -29,14 +29,14 @@
void elog_add_watchdog_reset(void)
{
- if (readl(_watchdog_tombstone) == WATCHDOG_TOMBSTONE_MAGIC)
+ if (read32(_watchdog_tombstone) == WATCHDOG_TOMBSTONE_MAGIC)
elog_add_event(ELOG_TYPE_ASYNC_HW_TIMER_EXPIRED);
- writel(0, _watchdog_tombstone);
+ write32(_watchdog_tombstone, 0);
}
void reboot_from_watchdog(void)
{
printk(BIOS_INFO, "Last reset was watchdog, reboot again to reset TPM!\n");
- writel(WATCHDOG_TOMBSTONE_MAGIC, _watchdog_tombstone);
+ write32(_watchdog_tombstone, WATCHDOG_TOMBSTONE_MAGIC);
hard_reset();
}