summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/cpu/samsung/exynos5420/Makefile.inc1
-rw-r--r--src/cpu/samsung/exynos5420/chip.h5
-rw-r--r--src/cpu/samsung/exynos5420/cpu.c14
-rw-r--r--src/cpu/samsung/exynos5420/usb.c105
-rw-r--r--src/cpu/samsung/exynos5420/usb.h62
-rw-r--r--src/mainboard/google/pit/devicetree.cb2
6 files changed, 186 insertions, 3 deletions
diff --git a/src/cpu/samsung/exynos5420/Makefile.inc b/src/cpu/samsung/exynos5420/Makefile.inc
index 6f9b91bb62..854040948e 100644
--- a/src/cpu/samsung/exynos5420/Makefile.inc
+++ b/src/cpu/samsung/exynos5420/Makefile.inc
@@ -52,6 +52,7 @@ ramstage-y += gpio.c
ramstage-y += i2c.c
ramstage-y += dp-reg.c
ramstage-y += fb.c
+ramstage-y += usb.c
exynos5420_add_bl1: $(obj)/coreboot.pre
printf " DD Adding Samsung Exynos5420 BL1\n"
diff --git a/src/cpu/samsung/exynos5420/chip.h b/src/cpu/samsung/exynos5420/chip.h
index 7f1aadce32..f2c710df50 100644
--- a/src/cpu/samsung/exynos5420/chip.h
+++ b/src/cpu/samsung/exynos5420/chip.h
@@ -20,6 +20,8 @@
#ifndef CPU_SAMSUNG_EXYNOS5420_H
#define CPU_SAMSUNG_EXYNOS5420_H
+#include "gpio.h"
+
struct cpu_samsung_exynos5420_config {
/* special magic numbers! */
int clkval_f;
@@ -34,6 +36,9 @@ struct cpu_samsung_exynos5420_config {
int yres;
int bpp;
+ int usb_vbus_gpio;
+ int usb_hsic_gpio;
+
u32 lcdbase;
};
diff --git a/src/cpu/samsung/exynos5420/cpu.c b/src/cpu/samsung/exynos5420/cpu.c
index 6e360bf350..d204556239 100644
--- a/src/cpu/samsung/exynos5420/cpu.c
+++ b/src/cpu/samsung/exynos5420/cpu.c
@@ -29,6 +29,7 @@
#include "dp-core.h"
#include "cpu.h"
#include "clk.h"
+#include "usb.h"
#include "chip.h"
#define RAM_BASE_KB (CONFIG_SYS_SDRAM_BASE >> 10)
@@ -119,15 +120,22 @@ static void exynos_displayport_init(device_t dev)
ret = lcd_ctrl_init(fb_size, &panel, (void *)lcdbase);
}
-static void cpu_init(device_t dev)
+static void cpu_enable(device_t dev)
{
exynos_displayport_init(dev);
+
ram_resource(dev, 0, RAM_BASE_KB, RAM_SIZE_KB);
set_cpu_id();
+}
+
+static void cpu_init(device_t dev)
+{
printk(BIOS_INFO, "CPU: S5P%X @ %ldMHz\n",
cpu_id, get_arm_clk() / (1024*1024));
+
+ usb_init(dev);
}
static void cpu_noop(device_t dev)
@@ -137,8 +145,8 @@ static void cpu_noop(device_t dev)
static struct device_operations cpu_ops = {
.read_resources = cpu_noop,
.set_resources = cpu_noop,
- .enable_resources = cpu_init,
- .init = cpu_noop,
+ .enable_resources = cpu_enable,
+ .init = cpu_init,
.scan_bus = 0,
};
diff --git a/src/cpu/samsung/exynos5420/usb.c b/src/cpu/samsung/exynos5420/usb.c
new file mode 100644
index 0000000000..4d0769970a
--- /dev/null
+++ b/src/cpu/samsung/exynos5420/usb.c
@@ -0,0 +1,105 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <arch/io.h>
+#include <delay.h>
+#include "gpio.h"
+#include "power.h"
+#include "cpu.h"
+#include "usb.h"
+#include "chip.h"
+
+/* Enable VBUS */
+static int usb_vbus_init(int vbus_gpio)
+{
+ /* Enable VBUS power switch */
+ gpio_direction_output(GPIO_X11, 1);
+ /* VBUS turn ON time */
+ mdelay(3);
+
+ return 0;
+}
+
+/* Setup the EHCI host controller. */
+
+static void setup_usb_phy(struct usb_phy *usb, int hsic_gpio)
+{
+ unsigned int hostphy_ctrl0;
+
+ power_enable_usb_phy();
+
+ /* Setting up host and device simultaneously */
+ hostphy_ctrl0 = readl(&usb->usbphyctrl0);
+ hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK | HOST_CTRL0_COMMONON_N |
+ /* HOST Phy setting */
+ HOST_CTRL0_PHYSWRST |
+ HOST_CTRL0_PHYSWRSTALL |
+ HOST_CTRL0_SIDDQ |
+ HOST_CTRL0_FORCESUSPEND |
+ HOST_CTRL0_FORCESLEEP);
+ hostphy_ctrl0 |= ( /* Setting up the ref freq */
+ CLK_24MHZ << 16 |
+ /* HOST Phy setting */
+ HOST_CTRL0_LINKSWRST |
+ HOST_CTRL0_UTMISWRST);
+ writel(hostphy_ctrl0, &usb->usbphyctrl0);
+ udelay(10);
+ clrbits_le32(&usb->usbphyctrl0,
+ HOST_CTRL0_LINKSWRST | HOST_CTRL0_UTMISWRST);
+ udelay(20);
+
+ /* EHCI Ctrl setting */
+ setbits_le32(&usb->ehcictrl,
+ EHCICTRL_ENAINCRXALIGN |
+ EHCICTRL_ENAINCR4 |
+ EHCICTRL_ENAINCR8 | EHCICTRL_ENAINCR16);
+
+ /* HSIC USB Hub initialization. */
+ // FIXME board specific?
+ gpio_direction_output(hsic_gpio, 0);
+ udelay(100);
+ gpio_direction_output(hsic_gpio, 1);
+ udelay(5000);
+
+ clrbits_le32(&usb->hsicphyctrl1,
+ HOST_CTRL0_SIDDQ |
+ HOST_CTRL0_FORCESLEEP |
+ HOST_CTRL0_FORCESUSPEND);
+ setbits_le32(&usb->hsicphyctrl1, HOST_CTRL0_PHYSWRST);
+ udelay(10);
+ clrbits_le32(&usb->hsicphyctrl1, HOST_CTRL0_PHYSWRST);
+
+ /* PHY clock and power setup time */
+ // FIXME If this happens more than 50ms before executing the payload,
+ // we might not need this delay.
+ mdelay(50);
+}
+
+void usb_init(device_t dev)
+{
+ struct usb_phy *usb;
+ struct cpu_samsung_exynos5420_config *conf = dev->chip_info;
+
+ usb_vbus_init(conf->usb_vbus_gpio);
+ usb = (struct usb_phy *) samsung_get_base_usb_phy();
+ setup_usb_phy(usb, conf->usb_hsic_gpio);
+}
diff --git a/src/cpu/samsung/exynos5420/usb.h b/src/cpu/samsung/exynos5420/usb.h
new file mode 100644
index 0000000000..1b7d6357e7
--- /dev/null
+++ b/src/cpu/samsung/exynos5420/usb.h
@@ -0,0 +1,62 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef CPU_SAMSUNG_EXYNOS5420_USB_H
+#define CPU_SAMSUNG_EXYNOS5420_USB_H
+
+#define CLK_24MHZ 5
+
+#define HOST_CTRL0_PHYSWRSTALL (1 << 31)
+#define HOST_CTRL0_COMMONON_N (1 << 9)
+#define HOST_CTRL0_SIDDQ (1 << 6)
+#define HOST_CTRL0_FORCESLEEP (1 << 5)
+#define HOST_CTRL0_FORCESUSPEND (1 << 4)
+#define HOST_CTRL0_WORDINTERFACE (1 << 3)
+#define HOST_CTRL0_UTMISWRST (1 << 2)
+#define HOST_CTRL0_LINKSWRST (1 << 1)
+#define HOST_CTRL0_PHYSWRST (1 << 0)
+
+#define HOST_CTRL0_FSEL_MASK (7 << 16)
+
+#define EHCICTRL_ENAINCRXALIGN (1 << 29)
+#define EHCICTRL_ENAINCR4 (1 << 28)
+#define EHCICTRL_ENAINCR8 (1 << 27)
+#define EHCICTRL_ENAINCR16 (1 << 26)
+
+/* Register map for PHY control */
+struct usb_phy {
+ uint32_t usbphyctrl0;
+ uint32_t usbphytune0;
+ uint32_t reserved1[2];
+ uint32_t hsicphyctrl1;
+ uint32_t hsicphytune1;
+ uint32_t reserved2[2];
+ uint32_t hsicphyctrl2;
+ uint32_t hsicphytune2;
+ uint32_t reserved3[2];
+ uint32_t ehcictrl;
+ uint32_t ohcictrl;
+ uint32_t usbotgsys;
+ uint32_t reserved4;
+ uint32_t usbotgtune;
+};
+
+void usb_init(device_t dev);
+
+#endif
diff --git a/src/mainboard/google/pit/devicetree.cb b/src/mainboard/google/pit/devicetree.cb
index 3b6cdb9014..0c687c41c3 100644
--- a/src/mainboard/google/pit/devicetree.cb
+++ b/src/mainboard/google/pit/devicetree.cb
@@ -30,4 +30,6 @@ chip cpu/samsung/exynos5420
register "left_margin" = "80"
register "right_margin" = "48"
register "hsync" = "32"
+ register "usb_vbus_gpio" = "GPIO_X11"
+ register "usb_hsic_gpio" = "GPIO_E10"
end