summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/soc/intel/fsp_broadwell_de/Makefile.inc3
-rw-r--r--src/soc/intel/fsp_broadwell_de/gpio.c109
-rw-r--r--src/soc/intel/fsp_broadwell_de/include/soc/gpio.h130
-rw-r--r--src/soc/intel/fsp_broadwell_de/include/soc/iomap.h5
-rw-r--r--src/soc/intel/fsp_broadwell_de/include/soc/lpc.h3
-rw-r--r--src/soc/intel/fsp_broadwell_de/romstage/romstage.c13
-rw-r--r--src/soc/intel/fsp_broadwell_de/southcluster.c12
7 files changed, 275 insertions, 0 deletions
diff --git a/src/soc/intel/fsp_broadwell_de/Makefile.inc b/src/soc/intel/fsp_broadwell_de/Makefile.inc
index 38cc4411db..fc6cdd3d42 100644
--- a/src/soc/intel/fsp_broadwell_de/Makefile.inc
+++ b/src/soc/intel/fsp_broadwell_de/Makefile.inc
@@ -11,6 +11,8 @@ subdirs-y += ../../../cpu/x86/cache
subdirs-y += ../../../lib/fsp
subdirs-y += fsp
+romstage-y += gpio.c
+
ramstage-y += spi.c
ramstage-y += cpu.c
ramstage-y += chip.c
@@ -27,6 +29,7 @@ ramstage-y += smbus_common.c
ramstage-y += smbus.c
romstage-y += tsc_freq.c
ramstage-y += smi.c
+ramstage-y += gpio.c
ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smmrelocate.c
ramstage-$(CONFIG_HAVE_SMI_HANDLER) += pmutil.c
smm-$(CONFIG_HAVE_SMI_HANDLER) += pmutil.c
diff --git a/src/soc/intel/fsp_broadwell_de/gpio.c b/src/soc/intel/fsp_broadwell_de/gpio.c
new file mode 100644
index 0000000000..41100e928c
--- /dev/null
+++ b/src/soc/intel/fsp_broadwell_de/gpio.c
@@ -0,0 +1,109 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <gpio.h>
+#include <soc/pci_devs.h>
+#include <soc/lpc.h>
+#include <soc/iomap.h>
+#include <soc/gpio.h>
+
+/* Use a wrapper for register addresses for different banks. */
+const static struct gpio_config_regs regs[GPIO_NUM_BANKS] = {
+ [0] = { .use_sel = GPIO_1_USE_SEL, .io_sel = GPIO_1_IO_SEL,
+ .level = GPIO_1_LVL, .nmi_en = GPIO_1_NMI_EN,
+ .blink_en = GPIO_1_BLINK, .invert_input = GPIO_1_INVERT },
+ [1] = { .use_sel = GPIO_2_USE_SEL, .io_sel = GPIO_2_IO_SEL,
+ .level = GPIO_2_LVL, .nmi_en = GPIO_2_NMI_EN,
+ .blink_en = REG_INVALID, .invert_input = REG_INVALID },
+ [2] = { .use_sel = GPIO_3_USE_SEL, .io_sel = GPIO_3_IO_SEL,
+ .level = GPIO_3_LVL, .nmi_en = GPIO_3_NMI_EN,
+ .blink_en = REG_INVALID, .invert_input = REG_INVALID },
+ };
+
+#define SETUP_GPIO_REG(reg, bit, bank) { uint32_t val; \
+ val = inl(GPIO_BASE_ADDRESS + regs[(bank)].reg); \
+ val &= ~(1 << (bit)); \
+ val |= ((pin->reg) << (bit)); \
+ outl(val, GPIO_BASE_ADDRESS + regs[(bank)].reg); }
+
+/* Initialize the GPIOs as defined on mainboard level. */
+void init_gpios(const struct gpio_config config[])
+{
+ uint8_t bank, bit;
+ const struct gpio_config *pin;
+
+ if (!config)
+ return;
+ /* Set up every GPIO in the table to the requested function. */
+ for (pin = config; pin->use_sel != GPIO_LIST_END; pin++) {
+ /* Skip unsupported GPIO numbers. */
+ if (pin->num > MAX_GPIO_NUM || pin->num == 13)
+ continue;
+ bank = pin->num / 32;
+ bit = pin->num % 32;
+ if (pin->use_sel == GPIO_MODE_GPIO) {
+ /* Setting level register first avoids possible short
+ * pulses on the pin if the output level differs from
+ * the register default value.
+ */
+ if (pin->io_sel == GPIO_OUTPUT)
+ SETUP_GPIO_REG(level, bit, bank);
+ /* Now set the GPIO direction and NMI selection. */
+ SETUP_GPIO_REG(io_sel, bit, bank);
+ SETUP_GPIO_REG(nmi_en, bit, bank);
+ }
+ /* Now set the pin mode as requested */
+ SETUP_GPIO_REG(use_sel, bit, bank);
+ /* The extended functions like inverting and blinking are only
+ * supported by GPIOs on bank 0.
+ */
+ if (bank)
+ continue;
+ /* Blinking is available only for outputs */
+ if (pin->io_sel == GPIO_OUTPUT)
+ SETUP_GPIO_REG(blink_en, bit, bank);
+ /* Inverting is available only for inputs */
+ if (pin->io_sel == GPIO_INPUT)
+ SETUP_GPIO_REG(invert_input, bit, bank);
+ }
+}
+
+/* Get GPIO pin value */
+int gpio_get(gpio_t gpio)
+{
+ uint8_t bank, bit;
+
+ bank = gpio / 32;
+ bit = gpio % 32;
+ return (inl(GPIO_BASE_ADDRESS + regs[bank].level) & (1 << bit)) ? 1 : 0;
+}
+
+/* Set GPIO pin value */
+void gpio_set(gpio_t gpio, int value)
+{
+ uint32_t reg;
+ uint8_t bank, bit;
+
+ bank = gpio / 32;
+ bit = gpio % 32;
+ reg = inl(GPIO_BASE_ADDRESS + regs[bank].level);
+ reg &= ~(1 << bit);
+ reg |= (!!value << bit);
+ outl(reg, GPIO_BASE_ADDRESS + regs[bank].level);
+}
diff --git a/src/soc/intel/fsp_broadwell_de/include/soc/gpio.h b/src/soc/intel/fsp_broadwell_de/include/soc/gpio.h
new file mode 100644
index 0000000000..07deeb08d6
--- /dev/null
+++ b/src/soc/intel/fsp_broadwell_de/include/soc/gpio.h
@@ -0,0 +1,130 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef FSP_BROADWELL_DE_GPIO_H_
+#define FSP_BROADWELL_DE_GPIO_H_
+
+#include <stdint.h>
+#include <compiler.h>
+
+/* Chipset owned GPIO configuration registers */
+#define GPIO_1_USE_SEL 0x00
+#define GPIO_1_IO_SEL 0x04
+#define GPIO_1_LVL 0x0c
+#define GPIO_1_BLINK 0x18
+#define GPIO_1_NMI_EN 0x28
+#define GPIO_1_INVERT 0x2c
+#define GPIO_2_USE_SEL 0x30
+#define GPIO_2_IO_SEL 0x34
+#define GPIO_2_LVL 0x38
+#define GPIO_2_NMI_EN 0x3c
+#define GPIO_3_USE_SEL 0x40
+#define GPIO_3_IO_SEL 0x44
+#define GPIO_3_LVL 0x48
+#define GPIO_3_NMI_EN 0x50
+#define REG_INVALID 0xff
+
+/* The pin can either be a GPIO or connected to the native function. */
+#define GPIO_MODE_NATIVE 0
+#define GPIO_MODE_GPIO 1
+/* Once configured as GPIO the pin can be an input or an output. */
+#define GPIO_OUTPUT 0
+#define GPIO_INPUT 1
+#define GPIO_NMI_EN 1
+/* For output GPIO mode the pin can either drive high or low level. */
+#define GPIO_OUT_LEVEL_LOW 0
+#define GPIO_OUT_LEVEL_HIGH 1
+/* The following functions are only valid for GPIO bank 1. */
+#define GPIO_OUT_BLINK 1
+#define GPIO_IN_INVERT 1
+
+#define GPIO_NUM_BANKS 3
+#define MAX_GPIO_NUM 75 /* 0 based GPIO number */
+#define GPIO_LIST_END 0xff
+
+/* Define possible GPIO configurations. */
+#define PCH_GPIO_END \
+ { .use_sel = GPIO_LIST_END }
+
+#define PCH_GPIO_NATIVE(gpio) { \
+ .num = (gpio), \
+ .use_sel = GPIO_MODE_NATIVE }
+
+#define PCH_GPIO_INPUT(gpio) { \
+ .num = (gpio), \
+ .use_sel = GPIO_MODE_GPIO, \
+ .io_sel = GPIO_INPUT }
+
+#define PCH_GPIO_INPUT_INVERT(gpio) { \
+ .num = (gpio), \
+ .use_sel = GPIO_MODE_GPIO, \
+ .io_sel = GPIO_INPUT, \
+ .invert_input = GPIO_IN_INVERT }
+
+#define PCH_GPIO_INPUT_NMI(gpio) { \
+ .num = (gpio), \
+ .use_sel = GPIO_MODE_GPIO, \
+ .io_sel = GPIO_INPUT, \
+ .nmi_en = GPIO_NMI_EN }
+
+#define PCH_GPIO_OUT_LOW(gpio) { \
+ .num = (gpio), \
+ .use_sel = GPIO_MODE_GPIO, \
+ .io_sel = GPIO_OUTPUT, \
+ .level = GPIO_OUT_LEVEL_LOW }
+
+#define PCH_GPIO_OUT_HIGH(gpio) { \
+ .num = (gpio), \
+ .use_sel = GPIO_MODE_GPIO, \
+ .io_sel = GPIO_OUTPUT, \
+ .level = GPIO_OUT_LEVEL_HIGH }
+
+#define PCH_GPIO_OUT_BLINK(gpio) { \
+ .num = (gpio), \
+ .use_sel = GPIO_MODE_GPIO, \
+ .io_sel = GPIO_OUTPUT, \
+ .blink_en = GPIO_OUT_BLINK }
+
+struct gpio_config {
+ uint8_t num;
+ uint8_t use_sel;
+ uint8_t io_sel;
+ uint8_t level;
+ uint8_t blink_en;
+ uint8_t nmi_en;
+ uint8_t invert_input;
+} __packed;
+
+/* Unfortunately the register layout is not linear between different GPIO banks.
+ * In addition not every bank has all the functions so that some registers might
+ * be missing on a particular bank. To make the code better readable introduce a
+ * wrapper structure for the register addresses for every bank.
+ */
+struct gpio_config_regs {
+ uint8_t use_sel;
+ uint8_t io_sel;
+ uint8_t level;
+ uint8_t nmi_en;
+ uint8_t blink_en;
+ uint8_t invert_input;
+};
+
+/* Define gpio_t here to be able to use src/include/gpio.h for gpio_set() and
+ gpio_get().*/
+typedef uint8_t gpio_t;
+
+/* Configure GPIOs with mainboard provided settings */
+void init_gpios(const struct gpio_config config[]);
+
+#endif /* FSP_BROADWELL_DE_GPIO_H_ */
diff --git a/src/soc/intel/fsp_broadwell_de/include/soc/iomap.h b/src/soc/intel/fsp_broadwell_de/include/soc/iomap.h
index ca842997a9..ac04c63af7 100644
--- a/src/soc/intel/fsp_broadwell_de/include/soc/iomap.h
+++ b/src/soc/intel/fsp_broadwell_de/include/soc/iomap.h
@@ -3,6 +3,7 @@
*
* Copyright (C) 2013 Google Inc.
* Copyright (C) 2015-2016 Intel Corp.
+ * Copyright (C) 2017 Siemens AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -63,4 +64,8 @@
#define ACPI_BASE_ADDRESS 0x400
#define ACPI_BASE_SIZE 0x80
+/* GPIO Base Address */
+#define GPIO_BASE_ADDRESS 0x500
+#define GPIO_BASE_SIZE 0x80
+
#endif /* _SOC_IOMAP_H_ */
diff --git a/src/soc/intel/fsp_broadwell_de/include/soc/lpc.h b/src/soc/intel/fsp_broadwell_de/include/soc/lpc.h
index 6a91f8fd2d..3f9c2024f7 100644
--- a/src/soc/intel/fsp_broadwell_de/include/soc/lpc.h
+++ b/src/soc/intel/fsp_broadwell_de/include/soc/lpc.h
@@ -21,6 +21,9 @@
#include <arch/acpi.h>
/* LPC Interface Bridge PCI Configuration Registers */
+#define GPIO_BASE_ADR_OFFSET 0x48
+#define GPIO_CTRL_OFFSET 0x4c
+#define GPIO_DECODE_ENABLE (1 << 4)
#define REVID 0x08
#define PIRQ_RCR1 0x60
#define SIRQ_CNTL 0x64
diff --git a/src/soc/intel/fsp_broadwell_de/romstage/romstage.c b/src/soc/intel/fsp_broadwell_de/romstage/romstage.c
index 5754ec00a5..d5d0a96b56 100644
--- a/src/soc/intel/fsp_broadwell_de/romstage/romstage.c
+++ b/src/soc/intel/fsp_broadwell_de/romstage/romstage.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2013 Google Inc.
* Copyright (C) 2015-2016 Intel Corp.
+ * Copyright (C) 2017 Siemens AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -32,6 +33,7 @@
#include <soc/lpc.h>
#include <soc/pci_devs.h>
#include <soc/romstage.h>
+#include <soc/gpio.h>
#include <build.h>
static void init_rtc(void)
@@ -45,6 +47,16 @@ static void init_rtc(void)
cmos_init(gen_pmcon3 & RTC_PWR_STS);
}
+/* Set up IO address range and enable it for the GPIO block. */
+static void setup_gpio_io_address(void)
+{
+ pci_write_config32(PCI_DEV(0, LPC_DEV, LPC_FUNC), GPIO_BASE_ADR_OFFSET,
+ GPIO_BASE_ADDRESS);
+ pci_write_config8(PCI_DEV(0, LPC_DEV, LPC_FUNC), GPIO_CTRL_OFFSET,
+ GPIO_DECODE_ENABLE);
+}
+
+
/* Entry from cache-as-ram.inc. */
void *asmlinkage main(FSP_INFO_HEADER *fsp_info_header)
{
@@ -58,6 +70,7 @@ void *asmlinkage main(FSP_INFO_HEADER *fsp_info_header)
}
console_init();
init_rtc();
+ setup_gpio_io_address();
/* Call into mainboard. */
post_code(0x41);
diff --git a/src/soc/intel/fsp_broadwell_de/southcluster.c b/src/soc/intel/fsp_broadwell_de/southcluster.c
index e8c8706a5c..3bf5429e39 100644
--- a/src/soc/intel/fsp_broadwell_de/southcluster.c
+++ b/src/soc/intel/fsp_broadwell_de/southcluster.c
@@ -4,6 +4,7 @@
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2013 Google Inc.
* Copyright (C) 2015-2016 Intel Corp.
+ * Copyright (C) 2017 Siemens AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -196,6 +197,17 @@ static void sc_add_io_resources(device_t dev)
res->size = LPC_DEFAULT_IO_RANGE_UPPER - LPC_DEFAULT_IO_RANGE_LOWER;
res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ /* Add the resource for GPIOs */
+ res = new_resource(dev, GPIO_BASE_ADR_OFFSET);
+ res->base = GPIO_BASE_ADDRESS;
+ res->size = GPIO_BASE_SIZE;
+ res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+ /* There is a separated enable-bit in GPIO_CTRL-register. It was set
+ * already in romstage but FSP was active in the meantime and could have
+ * cleared it. Set it here again to enable allocated IO-space for sure.
+ */
+ pci_write_config8(dev, GPIO_CTRL_OFFSET, GPIO_DECODE_ENABLE);
}
static void sc_read_resources(device_t dev)