summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/devices/pci_device.c118
-rw-r--r--src/devices/pci_ops.c10
-rw-r--r--src/include/device/pci.h2
-rw-r--r--src/include/pc80/i8259.h4
-rw-r--r--src/pc80/i8259.c167
5 files changed, 192 insertions, 109 deletions
diff --git a/src/devices/pci_device.c b/src/devices/pci_device.c
index 4a7a2cd9c5..7c8a758116 100644
--- a/src/devices/pci_device.c
+++ b/src/devices/pci_device.c
@@ -50,6 +50,10 @@
#if CONFIG_CARDBUS_PLUGIN_SUPPORT == 1
#include <device/cardbus.h>
#endif
+#define CONFIG_PC80_SYSTEM 1
+#if CONFIG_PC80_SYSTEM == 1
+#include <pc80/i8259.h>
+#endif
u8 pci_moving_config8(struct device *dev, unsigned int reg)
{
@@ -110,10 +114,10 @@ u32 pci_moving_config32(struct device * dev, unsigned int reg)
unsigned pci_find_next_capability(struct device *dev, unsigned cap,
unsigned last)
{
- unsigned pos;
+ unsigned pos = 0;
unsigned status;
unsigned reps = 48;
- pos = 0;
+
status = pci_read_config16(dev, PCI_STATUS);
if (!(status & PCI_STATUS_CAP_LIST)) {
return 0;
@@ -1193,86 +1197,62 @@ unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
return max;
}
+#if CONFIG_PC80_SYSTEM == 1
/**
- * Tell the EISA int controller this int must be level triggered.
+ *
+ * @brief Assign IRQ numbers
*
- * THIS IS A KLUDGE -- sorry, this needs to get cleaned up.
- */
-void pci_level_irq(unsigned char intNum)
-{
- unsigned short intBits = inb(0x4d0) | (((unsigned)inb(0x4d1)) << 8);
-
- printk_spew("%s: current ints are 0x%x\n", __func__, intBits);
- intBits |= (1 << intNum);
-
- printk_spew("%s: try to set ints 0x%x\n", __func__, intBits);
-
- /* Write new values. */
- outb((unsigned char)intBits, 0x4d0);
- outb((unsigned char)(intBits >> 8), 0x4d1);
-
- /* This seems like an error but is not. */
- if (inb(0x4d0) != (intBits & 0xff)) {
- printk_err(
- "%s: lower order bits are wrong: want 0x%x, got 0x%x\n",
- __func__, intBits & 0xff, inb(0x4d0));
- }
- if (inb(0x4d1) != ((intBits >> 8) & 0xff)) {
- printk_err(
- "%s: lower order bits are wrong: want 0x%x, got 0x%x\n",
- __func__, (intBits >> 8) & 0xff, inb(0x4d1));
- }
-}
-
-/**
- * This function assigns IRQs for all functions contained within the
- * indicated device address. If the device does not exist or does not
- * require interrupts then this function has no effect.
+ * This function assigns IRQs for all functions contained within the indicated
+ * device address. If the device does not exist or does not require interrupts
+ * then this function has no effect.
*
* This function should be called for each PCI slot in your system.
*
- * pIntAtoD is an array of IRQ #s that are assigned to PINTA through PINTD of
- * this slot.
- *
- * The particular irq #s that are passed in depend on the routing inside
- * your southbridge and on your motherboard.
- *
- * -kevinh@ispiri.com
- *
-*/
+ * @param bus
+ * @param slot
+ * @param pIntAtoD is an array of IRQ #s that are assigned to PINTA through
+ * PINTD of this slot. The particular irq #s that are passed in
+ * depend on the routing inside your southbridge and on your
+ * motherboard.
+ */
void pci_assign_irqs(unsigned bus, unsigned slot,
- const unsigned char pIntAtoD[4])
+ const unsigned char pIntAtoD[4])
{
- unsigned functNum;
- struct device *pdev;
- unsigned char line;
- unsigned char irq;
- unsigned char readback;
+ unsigned int funct;
+ device_t pdev;
+ u8 line;
+ u8 irq;
+ u8 readback;
+
+ /* Each slot may contain up to eight functions */
+ for (funct = 0; funct < 8; funct++) {
+ pdev = dev_find_slot(bus, (slot << 3) + funct);
+
+ if (!pdev)
+ continue;
- /* Each slot may contain up to eight functions. */
- for (functNum = 0; functNum < 8; functNum++) {
- pdev = dev_find_slot(bus, (slot << 3) + functNum);
+ line = pci_read_config8(pdev, PCI_INTERRUPT_PIN);
- if (pdev) {
- line = pci_read_config8(pdev, PCI_INTERRUPT_PIN);
+ // PCI spec says all values except 1..4 are reserved.
+ if ((line < 1) || (line > 4))
+ continue;
- /* PCI spec says all other values are reserved. */
- if ((line >= 1) && (line <= 4)) {
- irq = pIntAtoD[line - 1];
+ irq = pIntAtoD[line - 1];
- printk_debug("Assigning IRQ %d to %d:%x.%d\n",
- irq, bus, slot, functNum);
+ printk_debug("Assigning IRQ %d to %d:%x.%d\n",
+ irq, bus, slot, funct);
- pci_write_config8(pdev, PCI_INTERRUPT_LINE,
- pIntAtoD[line - 1]);
+ pci_write_config8(pdev, PCI_INTERRUPT_LINE,
+ pIntAtoD[line - 1]);
- readback =
- pci_read_config8(pdev, PCI_INTERRUPT_LINE);
- printk_debug(" Readback = %d\n", readback);
+#ifdef PARANOID_IRQ_ASSIGNMENTS
+ readback = pci_read_config8(pdev, PCI_INTERRUPT_LINE);
+ printk_debug(" Readback = %d\n", readback);
+#endif
- // Change to level triggered.
- pci_level_irq(pIntAtoD[line - 1]);
- }
- }
+ // Change to level triggered
+ i8259_configure_irq_trigger(pIntAtoD[line - 1], IRQ_LEVEL_TRIGGERED);
}
}
+#endif
+
diff --git a/src/devices/pci_ops.c b/src/devices/pci_ops.c
index ed07564f61..6029d757ef 100644
--- a/src/devices/pci_ops.c
+++ b/src/devices/pci_ops.c
@@ -27,24 +27,24 @@
static struct bus *get_pbus(device_t dev)
{
- struct bus *pbus;
+ struct bus *pbus = NULL;
if (!dev)
die("get_pbus: dev is NULL!\n");
-
- pbus = dev->bus;
+ else
+ pbus = dev->bus;
while(pbus && pbus->dev && !ops_pci_bus(pbus)) {
if (pbus == pbus->dev->bus) {
printk_alert("%s in endless loop looking for a parent "
- "bus with ops_pci_bus for %s, breaking out\n",
+ "bus with ops_pci_bus for %s, breaking out.\n",
__func__, dev_path(dev));
break;
}
pbus = pbus->dev->bus;
}
if (!pbus || !pbus->dev || !pbus->dev->ops || !pbus->dev->ops->ops_pci_bus) {
- printk_emerg("%s Cannot find pci bus operations\n", dev_path(dev));
+ printk_emerg("%s: Cannot find pci bus operations.\n", dev_path(dev));
die("");
}
return pbus;
diff --git a/src/include/device/pci.h b/src/include/device/pci.h
index ad005cfe89..df9e80dbbb 100644
--- a/src/include/device/pci.h
+++ b/src/include/device/pci.h
@@ -73,7 +73,7 @@ unsigned pci_find_capability(device_t dev, unsigned cap);
struct resource *pci_get_resource(struct device *dev, unsigned long index);
void pci_dev_set_subsystem(device_t dev, unsigned vendor, unsigned device);
void pci_dev_init(struct device *dev);
-void pci_level_irq(unsigned char intNum);
+
void pci_assign_irqs(unsigned bus, unsigned slot,
const unsigned char pIntAtoD[4]);
diff --git a/src/include/pc80/i8259.h b/src/include/pc80/i8259.h
index 48e8df58d9..c55ae21557 100644
--- a/src/include/pc80/i8259.h
+++ b/src/include/pc80/i8259.h
@@ -22,4 +22,8 @@
void setup_i8259(void);
+#define IRQ_LEVEL_TRIGGERED 1
+#define IRQ_EDGE_TRIGGERED 0
+void i8259_configure_irq_trigger(int int_num, int is_level_triggered);
+
#endif /* PC80_I8259_H */
diff --git a/src/pc80/i8259.c b/src/pc80/i8259.c
index a397e0e0d8..1361f379c0 100644
--- a/src/pc80/i8259.c
+++ b/src/pc80/i8259.c
@@ -1,42 +1,141 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
#include <arch/io.h>
#include <pc80/i8259.h>
-/* code taken from:
-!
-! setup.S Copyright (C) 1991, 1992 Linus Torvalds
-!
-! setup.s is responsible for getting the system data from the BIOS,
-! and putting them into the appropriate places in system memory.
-! both setup.s and system has been loaded by the bootblock.
- */
-/* we're getting screwed again and again by this problem of the 8259.
- * so we're going to leave this lying around for inclusion into
- * crt0.S on an as-needed basis.
-! well, that went ok, I hope. Now we have to reprogram the interrupts :-(
-! we put them right after the intel-reserved hardware interrupts, at
-! int 0x20-0x2F. There they won't mess up anything. Sadly IBM really
-! messed this up with the original PC, and they haven't been able to
-! rectify it afterwards. Thus the bios puts interrupts at 0x08-0x0f,
-! which is used for the internal hardware interrupts as well. We just
-! have to reprogram the 8259's, and it isn't fun.
- */
+#include <console/console.h>
+
+#define MASTER_PIC_ICW1 0x20
+#define SLAVE_PIC_ICW1 0xa0
+#define ICW_SELECT (1 << 4)
+#define OCW_SELECT (0 << 4)
+#define ADI (1 << 2)
+#define SNGL (1 << 1)
+#define IC4 (1 << 0)
+
+#define MASTER_PIC_ICW2 0x21
+#define SLAVE_PIC_ICW2 0xa1
+#define INT_VECTOR_MASTER 0x20
+#define IRQ0 0x00
+#define IRQ1 0x01
+#define INT_VECTOR_SLAVE 0x28
+#define IRQ8 0x00
+#define IRQ9 0x01
+
+#define MASTER_PIC_ICW3 0x21
+#define CASCADED_PIC (1 << 2)
+
+#define MASTER_PIC_ICW4 0x21
+#define SLAVE_PIC_ICW4 0xa1
+#define MICROPROCESSOR_MODE (1 << 0)
+
+#define SLAVE_PIC_ICW3 0xa1
+#define SLAVE_ID 0x02
+
+#define MASTER_PIC_OCW1 0x21
+#define SLAVE_PIC_OCW1 0xa1
+#define IRQ2 (1 << 2)
+#define ALL_IRQS 0xff
+
+#define ELCR1 0x4d0
+#define ELCR2 0x4d1
void setup_i8259(void)
{
- outb(0x11, 0x20); /*! initialization sequence to 8259A-1*/
- outb(0x11, 0xA0); /*! and to 8259A-2*/
- outb(0x20, 0x21); /*! start of hardware int's (0x20)*/
- outb(0x28, 0xA1); /*! start of hardware int's 2 (0x28)*/
- outb(0x04, 0x21); /*! 8259-1 is master*/
- outb(0x02, 0xA1); /*! 8259-2 is slave*/
- outb(0x01, 0x21); /*! 8086 mode for both*/
- outb(0x01, 0xA1);
- outb(0xFF, 0xA1); /*! mask off all interrupts for now*/
- outb(0xFB, 0x21); /*! mask all irq's but irq2 which is cascaded*/
+ /* A write to ICW1 starts the Interrupt Controller Initialization
+ * Sequence. This implicitly causes the following to happen:
+ * - Interrupt Mask register is cleared
+ * - Priority 7 is assigned to IRQ7 input
+ * - Slave mode address is set to 7
+ * - Special mask mode is cleared
+ *
+ * We send the initialization sequence to both the master and
+ * slave i8259 controller.
+ */
+ outb(ICW_SELECT|IC4, MASTER_PIC_ICW1);
+ outb(ICW_SELECT|IC4, SLAVE_PIC_ICW1);
+
+ /* Now the interrupt controller expects us to write to ICW2. */
+ outb(INT_VECTOR_MASTER | IRQ0, MASTER_PIC_ICW2);
+ outb(INT_VECTOR_SLAVE | IRQ8, SLAVE_PIC_ICW2);
+
+ /* Now the interrupt controller expects us to write to ICW3.
+ *
+ * The normal scenario is to set up cascading on IRQ2 on the master
+ * i8259 and assign the slave ID 2 to the slave i8259.
+ */
+ outb(CASCADED_PIC, MASTER_PIC_ICW3);
+ outb(SLAVE_ID, SLAVE_PIC_ICW3);
+
+ /* Now the interrupt controller expects us to write to ICW4.
+ *
+ * We switch both i8259 to microprocessor mode because they're
+ * operating as part of an x86 architecture based chipset
+ */
+ outb(MICROPROCESSOR_MODE, MASTER_PIC_ICW2);
+ outb(MICROPROCESSOR_MODE, SLAVE_PIC_ICW2);
+
+ /* Now clear the interrupts through OCW1.
+ * First we mask off all interrupts on the slave interrupt controller
+ * then we mask off all interrupts but interrupt 2 on the master
+ * controller. This way the cascading stays alife.
+ */
+ outb(ALL_IRQS, SLAVE_PIC_OCW1);
+ outb(ALL_IRQS & ~IRQ2, MASTER_PIC_OCW1);
+}
+
+/**
+ * @brief Configure IRQ triggering in the i8259 compatible Interrupt Controller.
+ *
+ * Switch a certain interrupt to be level / edge triggered.
+ *
+ * @param int_num legacy interrupt number (3-7, 9-15)
+ * @param is_level_triggered 1 for level triggered interrupt, 0 for edge
+ * triggered interrupt
+ */
+void i8259_configure_irq_trigger(int int_num, int is_level_triggered)
+{
+ u16 int_bits = inb(ELCR1) | (((u16)inb(ELCR2)) << 8);
+
+ printk_spew("%s: current interrupts are 0x%x\n", __func__, int_bits);
+ if (is_level_triggered)
+ int_bits |= (1 << int_num);
+ else
+ int_bits &= ~(1 << int_num);
+
+ /* Write new values */
+ printk_spew("%s: try to set interrupts 0x%x\n", __func__, int_bits);
+ outb((u8)(int_bits & 0xff), ELCR1);
+ outb((u8)(int_bits >> 8), ELCR2);
+
+#ifdef PARANOID_IRQ_TRIGGERS
+ /* Try reading back the new values. This seems like an error but is not ... */
+ if (inb(ELCR1) != (int_bits & 0xff)) {
+ printk_err("%s: lower order bits are wrong: want 0x%x, got 0x%x\n",
+ __func__, (int_bits & 0xff), inb(ELCR1));
+ }
+
+ if (inb(ELCR2) != (int_bits >> 8)) {
+ printk_err("%s: higher order bits are wrong: want 0x%x, got 0x%x\n",
+ __func__, (int_bits>>8), inb(ELCR2));
+ }
+#endif
}
-/*
- * I like the way Linus says it:
-! Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
-! need no steenking BIOS anyway (except for the initial loading :-).
-*/