summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/winent/Kconfig4
-rw-r--r--src/mainboard/winent/mb6047/Kconfig30
-rw-r--r--src/mainboard/winent/mb6047/acpi_tables.c16
-rw-r--r--src/mainboard/winent/mb6047/devicetree.cb45
-rw-r--r--src/mainboard/winent/mb6047/dsdt.asl190
-rw-r--r--src/mainboard/winent/mb6047/get_bus_conf.c67
-rw-r--r--src/mainboard/winent/mb6047/irq_tables.c32
-rw-r--r--src/mainboard/winent/mb6047/mptable.c46
-rw-r--r--src/mainboard/winent/mb6047/resourcemap.c266
-rw-r--r--src/mainboard/winent/mb6047/romstage.c45
10 files changed, 126 insertions, 615 deletions
diff --git a/src/mainboard/winent/Kconfig b/src/mainboard/winent/Kconfig
index 4c13a82bb0..28c3360d57 100644
--- a/src/mainboard/winent/Kconfig
+++ b/src/mainboard/winent/Kconfig
@@ -21,11 +21,15 @@ if VENDOR_WINENT
choice
prompt "Mainboard model"
+config BOARD_WINENT_MB6047
+ bool "MB6047"
+
config BOARD_WINENT_PL6064
bool "PL6064"
endchoice
+source "src/mainboard/winent/mb6047/Kconfig"
source "src/mainboard/winent/pl6064/Kconfig"
config MAINBOARD_VENDOR
diff --git a/src/mainboard/winent/mb6047/Kconfig b/src/mainboard/winent/mb6047/Kconfig
index ddd7ed0c80..507340c7ea 100644
--- a/src/mainboard/winent/mb6047/Kconfig
+++ b/src/mainboard/winent/mb6047/Kconfig
@@ -1,4 +1,4 @@
-if BOARD_TYAN_S2891
+if BOARD_WINENT_MB6047
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
@@ -6,8 +6,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select CPU_AMD_SOCKET_940
select NORTHBRIDGE_AMD_AMDK8
select SOUTHBRIDGE_NVIDIA_CK804
- select SOUTHBRIDGE_AMD_AMD8131
- select SUPERIO_WINBOND_W83627HF
+ select SUPERIO_WINBOND_W83627THG
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
@@ -16,10 +15,13 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select BOARD_ROMSIZE_KB_512
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select QRANK_DIMM_SUPPORT
+ select CK804_USE_NIC
+ select CK804_USE_ACI
+ select SET_FIDVID
config MAINBOARD_DIR
string
- default tyan/s2891
+ default winent/mb6047
config APIC_ID_OFFSET
hex
@@ -31,15 +33,15 @@ config SB_HT_CHAIN_ON_BUS0
config MAINBOARD_PART_NUMBER
string
- default "S2891"
+ default "MB6047"
config MAX_CPUS
int
- default 4
+ default 2
config MAX_PHYSICAL_CPUS
int
- default 2
+ default 1
config HT_CHAIN_UNITID_BASE
hex
@@ -53,4 +55,16 @@ config IRQ_SLOT_COUNT
int
default 11
-endif # BOARD_TYAN_S2891
+config CK804_PCI_E_X
+ int
+ default 0
+
+config VGA_BIOS_ID
+ string
+ default "126f,0720"
+
+config VGA_BIOS_FILE
+ string
+ default "DM22383.ROM"
+
+endif # BOARD_WINENT_MB6047
diff --git a/src/mainboard/winent/mb6047/acpi_tables.c b/src/mainboard/winent/mb6047/acpi_tables.c
index 42d9152ceb..1b59fbb8c6 100644
--- a/src/mainboard/winent/mb6047/acpi_tables.c
+++ b/src/mainboard/winent/mb6047/acpi_tables.c
@@ -30,7 +30,6 @@ unsigned long acpi_fill_mcfg(unsigned long current)
/* APIC */
unsigned long acpi_fill_madt(unsigned long current)
{
- unsigned long apic_addr;
device_t dev;
struct resource *res;
@@ -53,21 +52,6 @@ unsigned long acpi_fill_madt(unsigned long current)
pci_write_config32(dev, 0x84, 0x0000007d);
#endif
- /* Write AMD 8131 two IOAPICs. */
- dev = dev_find_slot(0x40, PCI_DEVFN(0x0,1));
- if (dev) {
- apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xf;
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 5,
- apic_addr, 0x18);
- }
-
- dev = dev_find_slot(0x40, PCI_DEVFN(0x1, 1));
- if (dev) {
- apic_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xf;
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 6,
- apic_addr, 0x1C);
- }
-
/* IRQ9 */
current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
current, 0, 9, 9, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_LOW);
diff --git a/src/mainboard/winent/mb6047/devicetree.cb b/src/mainboard/winent/mb6047/devicetree.cb
index 3d8c65e73a..09a062ec91 100644
--- a/src/mainboard/winent/mb6047/devicetree.cb
+++ b/src/mainboard/winent/mb6047/devicetree.cb
@@ -5,13 +5,13 @@ chip northbridge/amd/amdk8/root_complex # Root complex
end
end
device domain 0 on # PCI domain
- subsystemid 0x10f1 0x2891 inherit
+ subsystemid 0x10de 0xcb84 inherit
chip northbridge/amd/amdk8 # Northbridge / RAM controller
device pci 18.0 on # Link 0 == LDT 0
chip southbridge/nvidia/ck804 # Southbridge
device pci 0.0 on end # HT
device pci 1.0 on # LPC
- chip superio/winbond/w83627hf # Super I/O
+ chip superio/winbond/w83627thg # Super I/O
device pnp 2e.0 off # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
@@ -25,7 +25,7 @@ chip northbridge/amd/amdk8/root_complex # Root complex
io 0x60 = 0x3f8
irq 0x70 = 4
end
- device pnp 2e.3 off # Com2
+ device pnp 2e.3 on # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
@@ -35,20 +35,14 @@ chip northbridge/amd/amdk8/root_complex # Root complex
irq 0x70 = 1
irq 0x72 = 12
end
- device pnp 2e.6 off # Consumer IR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # Game port, MIDI, GPIO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
+ device pnp 2e.6 off end # Consumer IR
+ device pnp 2e.7 off end # Game port, MIDI, GPIO1
device pnp 2e.8 off end # GPIO2
device pnp 2e.9 off end # GPIO3
device pnp 2e.a off end # ACPI
- device pnp 2e.b off # Hardware monitor
+ device pnp 2e.b on # Hardware monitor
io 0x60 = 0x290
- irq 0x70 = 5
+ irq 0x70 = 0
end
end
end
@@ -97,38 +91,27 @@ chip northbridge/amd/amdk8/root_complex # Root complex
# end
device pci 2.0 on end # USB 1.1
device pci 2.1 on end # USB 2
- device pci 4.0 off end # ACI
+ device pci 4.0 on end # ACI
device pci 4.1 off end # MCI
device pci 6.0 on end # IDE
device pci 7.0 on end # SATA 1
device pci 8.0 on end # SATA 0
device pci 9.0 on # PCI
- # chip drivers/ati/ragexl
- device pci 7.0 on end
+ # device pci 6.0 on end
end
- device pci a.0 off end # NIC
- device pci b.0 off end # PCI E 3
- device pci c.0 off end # PCI E 2
+ device pci a.0 on end # NIC
+ device pci b.0 on end # PCI E 3
+ device pci c.0 on end # PCI E 2
device pci d.0 on end # PCI E 1
device pci e.0 on end # PCI E 0
register "ide0_enable" = "1"
- register "ide1_enable" = "1"
+ register "ide1_enable" = "0"
register "sata0_enable" = "1"
register "sata1_enable" = "1"
end
end
device pci 18.0 on end # Link 1
- device pci 18.0 on # Link 2 == LDT 2
- chip southbridge/amd/amd8131 # Southbridge
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on
- device pci 9.0 on end
- device pci 9.1 on end
- end
- device pci 1.1 on end
- end
- end
+ device pci 18.0 on end # Link 2 == LDT 2
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
diff --git a/src/mainboard/winent/mb6047/dsdt.asl b/src/mainboard/winent/mb6047/dsdt.asl
index 1c8680bfd1..aa04d81303 100644
--- a/src/mainboard/winent/mb6047/dsdt.asl
+++ b/src/mainboard/winent/mb6047/dsdt.asl
@@ -24,7 +24,7 @@
DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1)
{
- #include "northbridge/amd/amdk8/util.asl"
+ #include "northbridge/amd/amdk8/util.asl"
/* For now only define 2 power states:
* - S0 which is fully on
@@ -32,7 +32,12 @@ DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1)
* Any others would involve declaring the wake up methods.
*/
Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 })
- Name (\_S5, Package () { 0x02, 0x02, 0x00, 0x00 })
+ Name (\_S5, Package () { 0x07, 0x00, 0x00, 0x00 })
+
+ Name (PICM, 0x00)
+ Method (_PIC, 1, Serialized) {
+ Store (Arg0, PICM)
+ }
/* Root of the bus hierarchy */
Scope (\_SB)
@@ -83,53 +88,80 @@ DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1)
Return (Local3)
}
+ #include "southbridge/nvidia/ck804/acpi/ck804.asl"
+
/* PCI Routing Table */
Name (_PRT, Package () {
- /* Since source is 0, index is IRQ. */
- /* in ABCD, A=0, B=1, C=2, D=3 */
- /* SlotFFFF, ABCD, source, index */
- Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x0A }, /* 0x1 SMBUS IRQ 10 */
- Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x15 }, /* 0x2 USB IRQ 21 */
- Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x14 }, /* 0x2 USB IRQ 20 */
- Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x17 }, /* 0x7 SATA 0 IRQ 23 */
- Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x16 }, /* 0x8 SATA 1 IRQ 22 */
+ Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LLAS, 0x00 },
+ Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LLAS, 0x00 },
+ Package (0x04) { 0x0002FFFF, 0x00, \_SB.PCI0.LUOH, 0x00 },
+ Package (0x04) { 0x0002FFFF, 0x01, \_SB.PCI0.LUEH, 0x00 },
+ Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LAUD, 0x00 },
+ Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LMOD, 0x00 },
+ Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LPA0, 0x00 },
+ Package (0x04) { 0x0007FFFF, 0x00, \_SB.PCI0.LSA0, 0x00 },
+ Package (0x04) { 0x0008FFFF, 0x00, \_SB.PCI0.LSA1, 0x00 },
+ Package (0x04) { 0x000AFFFF, 0x00, \_SB.PCI0.LEMA, 0x00 },
})
Device (PCIL)
{
Name (_ADR, 0x00090000)
Name (_UID, 0x00)
- Name (_BBN, 0x01)
Name (_PRT, Package () {
- Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x12 }, /* 1:06 Onboard ATI Rage IRQ 18 */
+ /* onboard SM720 VGA */
+ Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0006FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 },
+ Package (0x04) { 0x0006FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 },
+ Package (0x04) { 0x0006FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 },
})
}
- /* 2:00 PCIe x16 SB IRQ 18 */
- Device (PE16)
+ Device (PEX0)
{
Name (_ADR, 0x000e0000)
Name (_UID, 0x00)
- Name (_BBN, 0x02)
Name (_PRT, Package () {
- Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, /* PCIE IRQ16-IRQ19 */
- Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 },
- Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 },
- Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 },
+ Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 },
})
}
- /* 2:00 PCIe x4 SB IRQ 17 */
- Device (PE4)
+ Device (PEX1)
{
- Name (_ADR, 0x000e0000)
+ Name (_ADR, 0x000d0000)
+ Name (_UID, 0x00)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 },
+ })
+ }
+
+ Device (PEX2)
+ {
+ Name (_ADR, 0x000c0000)
Name (_UID, 0x00)
- Name (_BBN, 0x02)
Name (_PRT, Package () {
- Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, /* PCIE IRQ16-IRQ19 */
- Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 },
- Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 },
- Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 },
+ Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 },
+ })
+ }
+
+ Device (PEX3)
+ {
+ Name (_ADR, 0x000b0000)
+ Name (_UID, 0x00)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 },
+ Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 },
})
}
@@ -172,110 +204,6 @@ DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1)
Return (TMP)
}
}
-
- /* Parallel port */
- Device (LP0)
- {
- Name (_HID, EisaId ("PNP0400")) // "PNP0401" for ECP
- Method (_STA, 0, NotSerialized)
- {
- Return (0x0f)
- }
- Method (_CRS, 0, NotSerialized)
- {
- Name (TMP, ResourceTemplate () {
- FixedIO (0x0378, 0x10)
- IRQNoFlags () {7}
- })
- Return (TMP)
- }
- }
-
- /* Floppy controller */
- Device (FDC0)
- {
- Name (_HID, EisaId ("PNP0700"))
- Method (_STA, 0, NotSerialized)
- {
- Return (0x0f)
- }
- Method (_CRS, 0, NotSerialized)
- {
- Name (BUF0, ResourceTemplate () {
- FixedIO (0x03F0, 0x08)
- IRQNoFlags () {6}
- DMA (Compatibility, NotBusMaster, Transfer8) {2}
- })
- Return (BUF0)
- }
- }
- }
- }
-
- /* AMD 8131 PCI-X tunnel */
- Device (PCI2)
- {
- Name (_HID, EisaId ("PNP0A03"))
- Name (_ADR, 0x00)
- Name (_UID, 0x00)
- Name (_BBN, 0x40)
-
- /* There is no _PRT Here because I don't know what to
- * put in it. Since the 8131 has its own APIC, it
- * isn't wired to other IRQs. */
-
- Method (_CRS, 0, NotSerialized)
- {
- Name (BUF0, ResourceTemplate ()
- {
- IO (Decode16,
- 0x0CF8, // Address Range Minimum
- 0x0CF8, // Address Range Maximum
- 0x01, // Address Alignment
- 0x08, // Address Length
- )
- })
- /* Methods bellow use SSDT to get actual MMIO regs
- The IO ports are from 0xd00, optionally an VGA,
- otherwise the info from MMIO is used.
- \_SB.GXXX(node, link)
- */
- Concatenate (\_SB.GMEM (0x00, 0x02), BUF0, Local1)
- Concatenate (\_SB.GIOR (0x00, 0x02), Local1, Local2)
- Concatenate (\_SB.GWBN (0x00, 0x02), Local2, Local3)
- Return (Local3)
- }
-
- /* Channel A PCIX 133 */
- Device (PCXF)
- {
- Name (_ADR, 0x00000000)
- Name (_UID, 0x00)
- Name (_BBN, 0x41)
- Name (_PRT, Package () {
- Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 shifted 3*/
- Package (0x04) { 0x0008FFFF, 0x01, 0x00, 0x10 },
- Package (0x04) { 0x0008FFFF, 0x02, 0x00, 0x1a },
- Package (0x04) { 0x0008FFFF, 0x03, 0x00, 0x1b },
- Package (0x04) { 0x000aFFFF, 0x00, 0x00, 0x1a }, /* PCIE IRQ24-IRQ27 shifted 2*/
- Package (0x04) { 0x000aFFFF, 0x01, 0x00, 0x1b },
- Package (0x04) { 0x000aFFFF, 0x02, 0x00, 0x18 },
- Package (0x04) { 0x000aFFFF, 0x03, 0x00, 0x19 },
- })
- }
-
- /* Channel B PCIX 100 */
- Device (PCXS) /* Onboard NIC */
- {
- Name (_ADR, 0x00010000)
- Name (_UID, 0x00)
- Name (_BBN, 0x42)
- Name (_PRT, Package () {
- Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x1c }, /* PCIE IRQ28-IRQ31 */
- Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x1d },
- Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x1e },
- Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x1f },
- })
}
}
}
diff --git a/src/mainboard/winent/mb6047/get_bus_conf.c b/src/mainboard/winent/mb6047/get_bus_conf.c
index e94c608cc7..5b96b05f25 100644
--- a/src/mainboard/winent/mb6047/get_bus_conf.c
+++ b/src/mainboard/winent/mb6047/get_bus_conf.c
@@ -3,9 +3,7 @@
#include <device/pci_ids.h>
#include <string.h>
#include <stdint.h>
-#if CONFIG_LOGICAL_CPUS
#include <cpu/amd/multicore.h>
-#endif
#include <cpu/amd/amdk8_sysconf.h>
#include <stdlib.h>
@@ -18,40 +16,17 @@ unsigned char bus_ck804_2; //3
unsigned char bus_ck804_3; //4
unsigned char bus_ck804_4; //5
unsigned char bus_ck804_5; //6
-unsigned char bus_8131_0; //7
-unsigned char bus_8131_1; //8
-unsigned char bus_8131_2; //9
-unsigned char bus_coproc_0;
unsigned apicid_ck804;
-unsigned apicid_8131_1;
-unsigned apicid_8131_2;
unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not
//You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
0x0000000,
- 0x0000200,
- 0x0000100,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0
};
unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
0x20202020,
- 0x20202020,
- 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
};
-unsigned sbdn3;
-unsigned coprocdn;
-
static unsigned get_bus_conf_done = 0;
void get_bus_conf(void)
@@ -79,8 +54,6 @@ void get_bus_conf(void)
sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
sbdn = sysconf.sbdn;
- sbdn3 = (sysconf.hcdn[1] & 0xff); // first byte of second chain
-
bus_ck804_0 = (sysconf.pci1234[0] >> 16) & 0xff;
/* CK804 */
@@ -120,45 +93,7 @@ void get_bus_conf(void)
sbdn + 0x0e);
}
- bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff;
- /* 8131-1 */
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0));
- if (dev) {
- bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_8131_2++;
- } else {
- printk(BIOS_DEBUG,
- "ERROR - could not find PCI %02x:01.0, using defaults\n",
- bus_8131_0);
-
- bus_8131_1 = bus_8131_0 + 1;
- bus_8131_2 = bus_8131_0 + 2;
- }
- /* 8131-2 */
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3 + 1, 0));
- if (dev) {
- bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- } else {
- printk(BIOS_DEBUG,
- "ERROR - could not find PCI %02x:02.0, using defaults\n",
- bus_8131_0);
-
- bus_8131_2 = bus_8131_1 + 1;
- }
-
- if (sysconf.pci1234[2] & 1) {
- bus_coproc_0 = (sysconf.pci1234[2] >> 16) & 0xff;
- coprocdn = (sysconf.hcdn[2] & 0xff);
- }
-
/*I/O APICs: APIC ID Version State Address*/
-#if CONFIG_LOGICAL_CPUS
- apicid_base = get_apicid_base(3);
-#else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
-#endif
+ apicid_base = get_apicid_base(1);
apicid_ck804 = apicid_base + 0;
- apicid_8131_1 = apicid_base + 1;
- apicid_8131_2 = apicid_base + 2;
}
diff --git a/src/mainboard/winent/mb6047/irq_tables.c b/src/mainboard/winent/mb6047/irq_tables.c
index d584dbb7a7..25da282a77 100644
--- a/src/mainboard/winent/mb6047/irq_tables.c
+++ b/src/mainboard/winent/mb6047/irq_tables.c
@@ -36,15 +36,6 @@ extern unsigned char bus_ck804_2; //3
extern unsigned char bus_ck804_3; //4
extern unsigned char bus_ck804_4; //5
extern unsigned char bus_ck804_5; //6
-extern unsigned char bus_8131_0; //7
-extern unsigned char bus_8131_1; //8
-extern unsigned char bus_8131_2; //9
-extern unsigned char bus_coproc_0;
-
-extern unsigned sbdn3;
-extern unsigned coprocdn;
-
-
unsigned long write_pirq_routing_table(unsigned long addr)
{
@@ -91,14 +82,6 @@ unsigned long write_pirq_routing_table(unsigned long addr)
//pci bridge
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
pirq_info++; slot_num++;
-//pcix bridge
- write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
-//co processor
- if(sysconf.pci1234[2] & 1) {
- write_pirq_info(pirq_info, bus_coproc_0, (coprocdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
- }
#if 0
//smbus
@@ -133,21 +116,6 @@ unsigned long write_pirq_routing_table(unsigned long addr)
//Slot2 pci
write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0);
pirq_info++; slot_num++;
-//Slot3 PCIE x16
- write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0);
- pirq_info++; slot_num++;
-
-//Slot4 PCIX
- write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0);
- pirq_info++; slot_num++;
-
-//Slot5 PCIX
- write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0);
- pirq_info++; slot_num++;
-
-//Slot6 PCIX
- write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0);
- pirq_info++; slot_num++;
#endif
pirq->size = 32 + 16 * slot_num;
diff --git a/src/mainboard/winent/mb6047/mptable.c b/src/mainboard/winent/mb6047/mptable.c
index cb49434bf0..26e79ca39a 100644
--- a/src/mainboard/winent/mb6047/mptable.c
+++ b/src/mainboard/winent/mb6047/mptable.c
@@ -11,14 +11,8 @@ extern unsigned char bus_ck804_2; //3
extern unsigned char bus_ck804_3; //4
extern unsigned char bus_ck804_4; //5
extern unsigned char bus_ck804_5; //6
-extern unsigned char bus_8131_0; //7
-extern unsigned char bus_8131_1; //8
-extern unsigned char bus_8131_2; //9
extern unsigned apicid_ck804;
-extern unsigned apicid_8131_1;
-extern unsigned apicid_8131_2;
-extern unsigned sbdn3;
static void *smp_write_config_table(void *v)
{
@@ -60,22 +54,6 @@ static void *smp_write_config_table(void *v)
dword = 0x0000007d;
pci_write_config32(dev, 0x84, dword);
-
- }
-
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base);
- }
- }
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base);
- }
}
}
@@ -107,28 +85,8 @@ static void *smp_write_config_table(void *v)
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|i, apicid_ck804, 0x10 + (1+i+4-sbdn%4)%4);
}
-//Onboard ati
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (7<<2)|0, apicid_ck804, 0x13); // 19
-
-//Channel B of 8131
-
-
-//Onboard Broadcom NIC
- for(i=0;i<2;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (0+i)%4); //28
- }
-
-//Channel A of 8131
-
-//Slot 4 PCIX 133/100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|i, apicid_8131_1, (0+i)%4); //24
- }
-
-//Slot 3 PCIX 133/100/66 SoDIMM PCI
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|i, apicid_8131_1, (2+i)%4); //26
- }
+//Onboard SM720 VGA
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (6<<2)|0, apicid_ck804, 0x13); // 19
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
mptable_lintsrc(mc, bus_isa);
diff --git a/src/mainboard/winent/mb6047/resourcemap.c b/src/mainboard/winent/mb6047/resourcemap.c
deleted file mode 100644
index d76f1d6f47..0000000000
--- a/src/mainboard/winent/mb6047/resourcemap.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Tyan S2891 needs a different resource map
- *
- */
-
-static void setup_s2891_resource_map(void)
-{
- static const unsigned int register_values[] = {
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
-// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
-// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
-// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
-// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration region i
- */
-// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */
-// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 */
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-
- };
-
- int max;
- max = ARRAY_SIZE(register_values);
- setup_resource_map(register_values, max);
-}
-
diff --git a/src/mainboard/winent/mb6047/romstage.c b/src/mainboard/winent/mb6047/romstage.c
index 9cd3a4aa4a..79bede8970 100644
--- a/src/mainboard/winent/mb6047/romstage.c
+++ b/src/mainboard/winent/mb6047/romstage.c
@@ -16,12 +16,12 @@
#include "cpu/x86/lapic.h"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
-#include "superio/winbond/w83627hf/early_serial.c"
+#include "superio/winbond/w83627thg/early_serial.c"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
#include "northbridge/amd/amdk8/setup_resource_map.c"
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+#define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1)
static void memreset_setup(void) { }
static void memreset(int controllers, const struct mem_controller *ctrl) { }
@@ -35,12 +35,14 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include "southbridge/nvidia/ck804/early_setup_ss.h"
#include "southbridge/nvidia/ck804/early_setup.c"
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
+#if CONFIG_SET_FIDVID
+#include "cpu/amd/model_fxx/fidvid.c"
+#endif
#include "northbridge/amd/amdk8/early_ht.c"
static void sio_setup(void)
@@ -59,25 +61,13 @@ static void sio_setup(void)
dword |= (1<<0) | (1<<1);
pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
-#if 1
- /* s2891 has onboard LPC port 80 */
- /*Hope I can enable port 80 here
- It will decode port 80 to LPC, If you are using PCI post code you can not do this */
- dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4);
- dword |= (1<<16);
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword);
-#endif
}
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
-#endif
+ DIMM0, 0, 0, 0,
+ DIMM1, 0, 0, 0,
};
int needs_reset;
@@ -96,25 +86,38 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
// post_code(0x32);
- w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ w83627thg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- setup_s2891_resource_map();
#if 0
dump_pci_device(PCI_DEV(0, 0x18, 0));
- dump_pci_device(PCI_DEV(0, 0x19, 0));
#endif
needs_reset = setup_coherent_ht_domain();
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
// It is said that we should start core1 after all core0 launched
start_other_cores();
wait_all_other_cores_started(bsp_apicid);
+
+#if CONFIG_SET_FIDVID
+ /* Check to see if processor is capable of changing FIDVID */
+ /* otherwise it will throw a GP# when reading FIDVID_STATUS */
+ if ((cpuid_edx(0x80000007) & 0x6) == 0x6) {
+ msr_t msr;
+ /* Read FIDVID_STATUS */
+ msr = rdmsr(0xc0010042);
+ printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+
+ enable_fid_change();
+ init_fidvid_bsp(bsp_apicid);
+
+ msr = rdmsr(0xc0010042);
+ printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+ }
#endif
needs_reset |= ht_setup_chains_x();