summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/include/espi.h6
-rw-r--r--src/lib/Kconfig6
-rw-r--r--src/lib/Makefile.inc5
-rw-r--r--src/lib/espi_debug.c94
4 files changed, 111 insertions, 0 deletions
diff --git a/src/include/espi.h b/src/include/espi.h
index f0ae37383a..7503af79ec 100644
--- a/src/include/espi.h
+++ b/src/include/espi.h
@@ -229,6 +229,12 @@
#define ESPI_VW_SIGNAL_HIGH(x) (ESPI_VW_VALID(x) | ESPI_VW_VALUE(1, x))
#define ESPI_VW_SIGNAL_LOW(x) (ESPI_VW_VALID(x) | ESPI_VW_VALUE(0, x))
+#if CONFIG(ESPI_DEBUG)
+void espi_show_slave_general_configuration(uint32_t config);
+#else
+static void espi_show_slave_general_configuration(uint32_t config) {}
+#endif
+
static inline bool espi_slave_supports_quad_io(uint32_t gen_caps)
{
uint32_t mode = gen_caps & ESPI_SLAVE_IO_MODE_SUPP_MASK;
diff --git a/src/lib/Kconfig b/src/lib/Kconfig
index dd9974a817..a6fb1f149e 100644
--- a/src/lib/Kconfig
+++ b/src/lib/Kconfig
@@ -75,3 +75,9 @@ config NO_FMAP_CACHE
If your platform really doesn't want to use an FMAP cache (e.g. due to
space constraints), you can select this to disable warnings and save
a bit more code.
+
+config ESPI_DEBUG
+ bool
+ help
+ This option enables eSPI library helper functions for displaying debug
+ information.
diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc
index f9bbebb35c..1fed543f70 100644
--- a/src/lib/Makefile.inc
+++ b/src/lib/Makefile.inc
@@ -162,6 +162,11 @@ romstage-y += hexdump.c
verstage-y += hexdump.c
smm-y += hexdump.c
+bootblock-$(CONFIG_ESPI_DEBUG) += espi_debug.c
+verstage-$(CONFIG_ESPI_DEBUG) += espi_debug.c
+romstage-$(CONFIG_ESPI_DEBUG) += espi_debug.c
+ramstage-$(CONFIG_ESPI_DEBUG) += espi_debug.c
+
bootblock-$(CONFIG_REG_SCRIPT) += reg_script.c
verstage-$(CONFIG_REG_SCRIPT) += reg_script.c
romstage-$(CONFIG_REG_SCRIPT) += reg_script.c
diff --git a/src/lib/espi_debug.c b/src/lib/espi_debug.c
new file mode 100644
index 0000000000..63e16f444b
--- /dev/null
+++ b/src/lib/espi_debug.c
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* This file is part of the coreboot project. */
+
+#include <console/console.h>
+#include <espi.h>
+#include <stdint.h>
+
+void espi_show_slave_general_configuration(uint32_t config)
+{
+ uint32_t io_mode;
+ uint32_t op_freq;
+
+ printk(BIOS_DEBUG, "eSPI Slave configuration:\n");
+
+ if (config & ESPI_SLAVE_CRC_ENABLE)
+ printk(BIOS_DEBUG, " CRC checking enabled\n");
+
+ if (config & ESPI_SLAVE_RESP_MOD_ENABLE)
+ printk(BIOS_DEBUG, " Response modifier enabled\n");
+
+ if (config & ESPI_SLAVE_ALERT_MODE_PIN)
+ printk(BIOS_DEBUG, " Dedicated Alert# used to signal alert event\n");
+ else
+ printk(BIOS_DEBUG, " IO bit1 pin used to signal alert event\n");
+
+ io_mode = config & ESPI_SLAVE_IO_MODE_SEL_MASK;
+ if (io_mode == ESPI_SLAVE_IO_MODE_SEL_SINGLE)
+ printk(BIOS_DEBUG, " eSPI single IO mode selected\n");
+ else if (io_mode == ESPI_SLAVE_IO_MODE_SEL_DUAL)
+ printk(BIOS_DEBUG, " eSPI dual IO mode selected\n");
+ else if (io_mode == ESPI_SLAVE_IO_MODE_SEL_QUAD)
+ printk(BIOS_DEBUG, " eSPI quad IO mode selected\n");
+ else
+ printk(BIOS_DEBUG, " Error: Invalid eSPI IO mode selected\n");
+
+ io_mode = config & ESPI_SLAVE_IO_MODE_SUPP_MASK;
+ if (io_mode == ESPI_SLAVE_IO_MODE_SUPP_SINGLE_QUAD)
+ printk(BIOS_DEBUG, " eSPI quad and single IO modes supported\n");
+ else if (io_mode == ESPI_SLAVE_IO_MODE_SUPP_SINGLE_DUAL)
+ printk(BIOS_DEBUG, " eSPI dual and single IO mode supported\n");
+ else if (io_mode == ESPI_SLAVE_IO_MODE_SUPP_SINGLE_DUAL_QUAD)
+ printk(BIOS_DEBUG, " eSPI quad, dual, and single IO modes supported\n");
+ else
+ printk(BIOS_DEBUG, " Only eSPI single IO mode supported\n");
+
+ if (config & ESPI_SLAVE_OPEN_DRAIN_ALERT_SEL)
+ printk(BIOS_DEBUG, " Alert# pin is open-drain\n");
+ else
+ printk(BIOS_DEBUG, " Alert# pin is driven\n");
+
+ op_freq = config & ESPI_SLAVE_OP_FREQ_SEL_MASK;
+ if (op_freq == ESPI_SLAVE_OP_FREQ_SEL_20_MHZ)
+ printk(BIOS_DEBUG, " eSPI 20MHz selected\n");
+ else if (op_freq == ESPI_SLAVE_OP_FREQ_SEL_25_MHZ)
+ printk(BIOS_DEBUG, " eSPI 25MHz selected\n");
+ else if (op_freq == ESPI_SLAVE_OP_FREQ_SEL_33_MHZ)
+ printk(BIOS_DEBUG, " eSPI 33MHz selected\n");
+ else if (op_freq == ESPI_SLAVE_OP_FREQ_SEL_50_MHZ)
+ printk(BIOS_DEBUG, " eSPI 50MHz selected\n");
+ else if (op_freq == ESPI_SLAVE_OP_FREQ_SEL_66_MHZ)
+ printk(BIOS_DEBUG, " eSPI 66MHz selected\n");
+ else
+ printk(BIOS_DEBUG, " Error: Invalid eSPI frequency\n");
+
+ if (config & ESPI_SLAVE_OPEN_DRAIN_ALERT_SUPP)
+ printk(BIOS_DEBUG, " Open-drain Alert# pin supported\n");
+
+ op_freq = config & ESPI_SLAVE_OP_FREQ_SUPP_MASK;
+ if (op_freq == ESPI_SLAVE_OP_FREQ_SUPP_20_MHZ)
+ printk(BIOS_DEBUG, " eSPI 20MHz supported\n");
+ else if (op_freq == ESPI_SLAVE_OP_FREQ_SUPP_25_MHZ)
+ printk(BIOS_DEBUG, " eSPI 25MHz supported\n");
+ else if (op_freq == ESPI_SLAVE_OP_FREQ_SUPP_33_MHZ)
+ printk(BIOS_DEBUG, " eSPI 33MHz supported\n");
+ else if (op_freq == ESPI_SLAVE_OP_FREQ_SUPP_50_MHZ)
+ printk(BIOS_DEBUG, " eSPI 50MHz supported\n");
+ else if (op_freq == ESPI_SLAVE_OP_FREQ_SUPP_66_MHZ)
+ printk(BIOS_DEBUG, " eSPI 66MHz supported\n");
+ else
+ printk(BIOS_DEBUG, " Error: Invalid eSPI frequency\n");
+
+ printk(BIOS_DEBUG, " Maximum Wait state: %d\n",
+ (config & ESPI_SLAVE_MAX_WAIT_MASK) >> ESPI_SLAVE_MAX_WAIT_SHIFT);
+
+ if (config & ESPI_SLAVE_PERIPH_CH_SUPP)
+ printk(BIOS_DEBUG, " Peripheral Channel supported\n");
+ if (config & ESPI_SLAVE_VW_CH_SUPP)
+ printk(BIOS_DEBUG, " Virtual Wire Channel supported\n");
+ if (config & ESPI_SLAVE_OOB_CH_SUPP)
+ printk(BIOS_DEBUG, " OOB Channel supported\n");
+ if (config & ESPI_SLAVE_FLASH_CH_SUPP)
+ printk(BIOS_DEBUG, " Flash Access Channel supported\n");
+ printk(BIOS_DEBUG, "\n");
+}