summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/soc/intel/apollolake/gpio.c11
-rw-r--r--src/soc/intel/apollolake/include/soc/gpio.h25
-rw-r--r--src/soc/intel/apollolake/include/soc/gpio_defs.h26
3 files changed, 54 insertions, 8 deletions
diff --git a/src/soc/intel/apollolake/gpio.c b/src/soc/intel/apollolake/gpio.c
index a3ffb3de0f..2d325255e7 100644
--- a/src/soc/intel/apollolake/gpio.c
+++ b/src/soc/intel/apollolake/gpio.c
@@ -85,10 +85,19 @@ static void gpio_configure_itss(const struct pad_config *cfg,
void gpio_configure_pad(const struct pad_config *cfg)
{
+ uint32_t dw1;
const struct pad_community *comm = gpio_get_community(cfg->pad);
uint16_t config_offset = PAD_CFG_OFFSET(cfg->pad - comm->first_pad);
+
+ /* Iostandby bits are tentatively stored in [3:0] bits (RO) of config1.
+ * dw1 is used to extract the bits of Iostandby.
+ * This is done to preserve config1 size as unit16 in gpio.h.
+ */
+ dw1 = cfg->config1 & ~PAD_CFG1_IOSSTATE_MASK;
+ dw1 |= (cfg->config1 & PAD_CFG1_IOSSTATE_MASK) << PAD_CFG1_IOSSTATE_SHIFT;
+
iosf_write(comm->port, config_offset, cfg->config0);
- iosf_write(comm->port, config_offset + sizeof(uint32_t), cfg->config1);
+ iosf_write(comm->port, config_offset + sizeof(uint32_t), dw1);
gpio_configure_itss(cfg, comm->port, config_offset);
}
diff --git a/src/soc/intel/apollolake/include/soc/gpio.h b/src/soc/intel/apollolake/include/soc/gpio.h
index 1ebac2dabc..fc2401d165 100644
--- a/src/soc/intel/apollolake/include/soc/gpio.h
+++ b/src/soc/intel/apollolake/include/soc/gpio.h
@@ -28,6 +28,7 @@ typedef uint32_t gpio_t;
#define PAD_FUNC(value) PAD_CFG0_MODE_##value
#define PAD_RESET(value) PAD_CFG0_RESET_##value
#define PAD_PULL(value) PAD_CFG1_PULL_##value
+#define PAD_IOSSTATE(value) PAD_CFG1_IOSSTATE_##value
#define PAD_IRQ_CFG(route, trig, inv) \
(PAD_CFG0_ROUTE_##route | \
PAD_CFG0_TRIG_##trig | \
@@ -42,19 +43,25 @@ typedef uint32_t gpio_t;
/* Native function configuration */
#define PAD_CFG_NF(pad, pull, rst, func) \
- _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull))
+ _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+ PAD_IOSSTATE(TxLASTRxE))
+
+/* Native function configuration for standby state */
+#define PAD_CFG_NF_IOSSTATE(pad, pull, rst, func, iosstate) \
+ _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+ PAD_IOSSTATE(iosstate))
/* General purpose output, no pullup/down. */
#define PAD_CFG_GPO(pad, val, rst) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
- PAD_PULL(NONE))
+ PAD_PULL(NONE) | PAD_IOSSTATE(TxLASTRxE))
/* General purpose input */
#define PAD_CFG_GPI(pad, pull, rst) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
- PAD_PULL(pull))
+ PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE))
/* No Connect configuration for unused pad.
* NC should be GPI with Term as PU20K, PD20K, NONE depending upon default Term
@@ -65,7 +72,8 @@ typedef uint32_t gpio_t;
#define PAD_CFG_GPI_APIC(pad, pull, rst, trig, inv) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
- PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull))
+ PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
+ PAD_IOSSTATE(TxLASTRxE))
/*
* The following APIC macros assume the APIC will handle the filtering
@@ -82,7 +90,8 @@ typedef uint32_t gpio_t;
#define PAD_CFG_GPI_SMI(pad, pull, rst, trig, inv) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
- PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull))
+ PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
+ PAD_IOSSTATE(TxLASTRxE))
#define PAD_CFG_GPI_SMI_LOW(pad, pull, rst, trig) \
PAD_CFG_GPI_SMI(pad, pull, rst, trig, INVERT)
@@ -94,7 +103,8 @@ typedef uint32_t gpio_t;
#define PAD_CFG_GPI_SCI(pad, pull, rst, trig, inv) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
- PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull))
+ PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+ PAD_IOSSTATE(TxLASTRxE))
#define PAD_CFG_GPI_SCI_LOW(pad, pull, rst, trig) \
PAD_CFG_GPI_SCI(pad, pull, rst, trig, INVERT)
@@ -106,7 +116,8 @@ typedef uint32_t gpio_t;
#define PAD_CFG_GPI_NMI(pad, pull, rst, trig, inv) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
- PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull))
+ PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \
+ PAD_IOSSTATE(TxLASTRxE))
struct pad_config {
uint32_t config0;
diff --git a/src/soc/intel/apollolake/include/soc/gpio_defs.h b/src/soc/intel/apollolake/include/soc/gpio_defs.h
index aa1ce8cf65..0a9fb151ea 100644
--- a/src/soc/intel/apollolake/include/soc/gpio_defs.h
+++ b/src/soc/intel/apollolake/include/soc/gpio_defs.h
@@ -86,6 +86,32 @@
#define PAD_CFG1_PULL_UP_20K (0xc << 10)
#define PAD_CFG1_PULL_UP_667 (0xd << 10)
#define PAD_CFG1_PULL_NATIVE (0xf << 10)
+/* Tx enabled driving last value driven, Rx enabled */
+#define PAD_CFG1_IOSSTATE_TxLASTRxE (0x0 << 0)
+/* Tx enabled driving 0, Rx disabled and Rx driving 0 back to its controller
+ * internally */
+#define PAD_CFG1_IOSSTATE_Tx0RxDCRx0 (0x1 << 0)
+/* Tx enabled driving 0, Rx disabled and Rx driving 1 back to its controller
+ * internally */
+#define PAD_CFG1_IOSSTATE_Tx0RXDCRx1 (0x2 << 0)
+/* Tx enabled driving 1, Rx disabled and Rx driving 0 back to its controller
+ * internally */
+#define PAD_CFG1_IOSSTATE_Tx1RXDCRx0 (0x3 << 0)
+/* Tx enabled driving 1, Rx disabled and Rx driving 1 back to its controller
+ * internally */
+#define PAD_CFG1_IOSSTATE_Tx1RxDCRx1 (0x4 << 0)
+/* Tx enabled driving 0, Rx enabled */
+#define PAD_CFG1_IOSSTATE_Tx0RxE (0x5 << 0)
+/* Tx enabled driving 1, Rx enabled */
+#define PAD_CFG1_IOSSTATE_Tx1RxE (0x6 << 0)
+/* Hi-Z, Rx driving 0 back to its controller internally */
+#define PAD_CFG1_IOSSTATE_HIZCRx0 (0x7 << 0)
+/* Hi-Z, Rx driving 1 back to its controller internally */
+#define PAD_CFG1_IOSSTATE_HIZCRx1 (0x8 << 0)
+#define PAD_CFG1_IOSSTATE_TxDRxE (0x9 << 0) /* Tx disabled, Rx enabled */
+#define PAD_CFG1_IOSSTATE_IGNORE (0xf << 0) /* Ignore Iostandby */
+#define PAD_CFG1_IOSSTATE_MASK 0xf /* mask to extract Iostandby bits */
+#define PAD_CFG1_IOSSTATE_SHIFT 14 /* set Iostandby bits [17:14] */
#define PAD_CFG_BASE 0x500
#define PAD_CFG_OFFSET(pad) (PAD_CFG_BASE + ((pad) * 8))