summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/soc/intel/cannonlake/graphics.c38
1 files changed, 38 insertions, 0 deletions
diff --git a/src/soc/intel/cannonlake/graphics.c b/src/soc/intel/cannonlake/graphics.c
index 5cf0ec83ac..1487a31c9b 100644
--- a/src/soc/intel/cannonlake/graphics.c
+++ b/src/soc/intel/cannonlake/graphics.c
@@ -19,6 +19,7 @@
#include <fsp/util.h>
#include <device/device.h>
#include <device/pci.h>
+#include <drivers/intel/gma/i915_reg.h>
#include <drivers/intel/gma/opregion.h>
#include <intelblocks/graphics.h>
@@ -27,6 +28,43 @@ uintptr_t fsp_soc_get_igd_bar(void)
return graphics_get_memory_base();
}
+void graphics_soc_init(struct device *dev)
+{
+ uint32_t ddi_buf_ctl;
+
+ /*
+ * Enable DDI-A (eDP) 4-lane operation if the link is not up yet.
+ * This will allow the kernel to use 4-lane eDP links properly
+ * if the VBIOS or GOP driver do not execute.
+ */
+ ddi_buf_ctl = graphics_gtt_read(DDI_BUF_CTL_A);
+ if (!acpi_is_wakeup_s3() && !(ddi_buf_ctl & DDI_BUF_CTL_ENABLE)) {
+ ddi_buf_ctl |= (DDI_A_4_LANES | DDI_INIT_DISPLAY_DETECTED |
+ DDI_BUF_IS_IDLE);
+ graphics_gtt_write(DDI_BUF_CTL_A, ddi_buf_ctl);
+ }
+
+ /*
+ * GFX PEIM module inside FSP binary is taking care of graphics
+ * initialization based on INTEL_GMA_ADD_VBT_DATA_FILE Kconfig
+ * option and input VBT file. Hence no need to load/execute legacy VGA
+ * OpROM in order to initialize GFX.
+ *
+ * In case of non-FSP solution, SoC need to select VGA_ROM_RUN
+ * Kconfig to perform GFX initialization through VGA OpRom.
+ */
+ if (IS_ENABLED(CONFIG_INTEL_GMA_ADD_VBT_DATA_FILE))
+ return;
+
+ /* IGD needs to Bus Master */
+ uint32_t reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ /* Initialize PCI device, load/execute BIOS Option ROM */
+ pci_dev_init(dev);
+}
+
uintptr_t graphics_soc_write_acpi_opregion(struct device *device,
uintptr_t current, struct acpi_rsdp *rsdp)
{