summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/biostar/am1ml/BiosCallOuts.c90
-rw-r--r--src/mainboard/biostar/am1ml/Kconfig1
-rw-r--r--src/mainboard/biostar/am1ml/OemCustomize.c40
-rw-r--r--src/mainboard/biostar/am1ml/mainboard.c5
-rw-r--r--src/mainboard/biostar/am1ml/romstage.c112
5 files changed, 80 insertions, 168 deletions
diff --git a/src/mainboard/biostar/am1ml/BiosCallOuts.c b/src/mainboard/biostar/am1ml/BiosCallOuts.c
index ab46b3b1fb..140e04e652 100644
--- a/src/mainboard/biostar/am1ml/BiosCallOuts.c
+++ b/src/mainboard/biostar/am1ml/BiosCallOuts.c
@@ -18,14 +18,13 @@
#include "AGESA.h"
#include "amdlib.h"
#include <northbridge/amd/agesa/BiosCallOuts.h>
+#include <northbridge/amd/agesa/state_machine.h>
#include "Ids.h"
#include "heapManager.h"
#include "FchPlatform.h"
#include "cbfs.h"
#include <stdlib.h>
-static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr);
-
const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
{AGESA_DO_RESET, agesa_Reset },
@@ -35,7 +34,6 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
{AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
- {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config },
{AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage }
};
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
@@ -97,63 +95,37 @@ static const CODEC_TBL_LIST CodecTableList[] =
#define FREQ_14HZ 0xFE
#define FREQ_11HZ 0xFF
-
-
-/**
- * Fch Oem setting callback
- *
- * Configure platform specific Hudson device,
- * such Azalia, SATA, IMC etc.
- */
-static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr)
+void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset)
{
- AMD_CONFIG_PARAMS *StdHeader = ConfigPtr;
-
- if (StdHeader->Func == AMD_INIT_RESET) {
- FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData;
- printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
- FchParams_reset->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
- FchParams_reset->FchReset.Xhci1Enable = FALSE;
- FchParams_reset->LegacyFree = IS_ENABLED(CONFIG_HUDSON_LEGACY_FREE);
- FchParams_reset->FchReset.SataEnable = 1;
- FchParams_reset->FchReset.IdeEnable = 0;
- FchParams_reset->Mode = 6;
- } else if (StdHeader->Func == AMD_INIT_ENV) {
- FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
- printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
-
- /* Azalia Controller OEM Codec Table Pointer */
- FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST*)(&CodecTableList[0]);
- /* Azalia Controller Front Panel OEM Table Pointer */
-
- FchParams_env->Imc.ImcEnable = FALSE;
- FchParams_env->Hwm.HwMonitorEnable = FALSE;
- FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */
-
- /* sata configuration */
- printk(BIOS_DEBUG, "Configuring SATA: selected mode = ");
- FchParams_env->Sata.SataClass = CONFIG_HUDSON_SATA_MODE;
- switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) { // code from olivehillplus (ft3b) - only one place where sata is configured
- case SataLegacyIde:
- case SataRaid:
- case SataAhci:
- case SataAhci7804:
- FchParams_env->Sata.SataIdeMode = FALSE;
- printk(BIOS_DEBUG, "AHCI or RAID or IDE = %x\n", CONFIG_HUDSON_SATA_MODE);
- break;
+ FchParams_reset->LegacyFree = IS_ENABLED(CONFIG_HUDSON_LEGACY_FREE);
+ FchParams_reset->Mode = 6;
+}
- case SataIde2Ahci:
- case SataIde2Ahci7804:
- default: /* SataNativeIde */
- FchParams_env->Sata.SataIdeMode = TRUE;
- printk(BIOS_DEBUG, "IDE2AHCI = %x\n", CONFIG_HUDSON_SATA_MODE);
- break;
- }
- /* XHCI configuration */
- FchParams_env->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
- FchParams_env->Usb.Xhci1Enable = FALSE;
+void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env)
+{
+ /* Azalia Controller OEM Codec Table Pointer */
+ FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]);
+
+ /* Fan Control */
+ FchParams_env->Imc.ImcEnable = FALSE;
+ FchParams_env->Hwm.HwMonitorEnable = FALSE;
+ FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */
+
+ FchParams_env->Sata.SataClass = CONFIG_HUDSON_SATA_MODE;
+ switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) { // code from olivehillplus (ft3b) - only one place where sata is configured
+ case SataLegacyIde:
+ case SataRaid:
+ case SataAhci:
+ case SataAhci7804:
+ FchParams_env->Sata.SataIdeMode = FALSE;
+ printk(BIOS_DEBUG, "AHCI or RAID or IDE = %x\n", CONFIG_HUDSON_SATA_MODE);
+ break;
+
+ case SataIde2Ahci:
+ case SataIde2Ahci7804:
+ default: /* SataNativeIde */
+ FchParams_env->Sata.SataIdeMode = TRUE;
+ printk(BIOS_DEBUG, "IDE2AHCI = %x\n", CONFIG_HUDSON_SATA_MODE);
+ break;
}
- printk(BIOS_DEBUG, "Done\n");
-
- return AGESA_SUCCESS;
}
diff --git a/src/mainboard/biostar/am1ml/Kconfig b/src/mainboard/biostar/am1ml/Kconfig
index abd0f987b2..1b131dd25f 100644
--- a/src/mainboard/biostar/am1ml/Kconfig
+++ b/src/mainboard/biostar/am1ml/Kconfig
@@ -19,7 +19,6 @@ if BOARD_BIOSTAR_AM1ML
config BOARD_SPECIFIC_OPTIONS
def_bool y
select BOARD_ROMSIZE_KB_4096
- select AGESA_LEGACY
select CPU_AMD_AGESA_FAMILY16_KB
select FORCE_AM1_SOCKET_SUPPORT
select GFXUMA
diff --git a/src/mainboard/biostar/am1ml/OemCustomize.c b/src/mainboard/biostar/am1ml/OemCustomize.c
index c44a9944c2..2fa9719368 100644
--- a/src/mainboard/biostar/am1ml/OemCustomize.c
+++ b/src/mainboard/biostar/am1ml/OemCustomize.c
@@ -20,7 +20,7 @@
#include <PlatformMemoryConfiguration.h>
#include "Filecode.h"
-#include <northbridge/amd/agesa/agesawrapper.h>
+#include <northbridge/amd/agesa/state_machine.h>
#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE
@@ -104,6 +104,18 @@ static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = {
.DdiLinkList = DdiList
};
+
+void board_BeforeInitReset(struct sysinfo *cb, AMD_RESET_PARAMS *Reset)
+{
+ FCH_RESET_INTERFACE *FchReset = &Reset->FchInterface;
+
+ FchReset->Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+ FchReset->Xhci1Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+
+ FchReset->SataEnable = 1;
+ FchReset->IdeEnable = 0;
+}
+
/*---------------------------------------------------------------------------------------*/
/**
* OemCustomizeInitEarly
@@ -120,7 +132,7 @@ static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = {
**/
/*---------------------------------------------------------------------------------------*/
-static AGESA_STATUS OemInitEarly(AMD_EARLY_PARAMS * InitEarly)
+void board_BeforeInitEarly(struct sysinfo *cb, AMD_EARLY_PARAMS *InitEarly)
{
AGESA_STATUS Status;
PCIe_COMPLEX_DESCRIPTOR *PcieComplexListPtr;
@@ -142,14 +154,6 @@ static AGESA_STATUS OemInitEarly(AMD_EARLY_PARAMS * InitEarly)
PcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
LibAmdMemCopy (PcieComplexListPtr, &PcieComplex, sizeof(PcieComplex), &InitEarly->StdHeader);
InitEarly->GnbConfig.PcieComplexList = PcieComplexListPtr;
- return AGESA_SUCCESS;
-}
-
-static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid)
-{
- /* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */
- InitMid->GnbMidConfiguration.iGpuVgaMode = 0;
- return AGESA_SUCCESS;
}
/*----------------------------------------------------------------------------------------
@@ -163,7 +167,7 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid)
* is populated, AGESA will base its settings on the data from the table. Otherwise, it will
* use its default conservative settings.
*/
-CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
+static CONST PSO_ENTRY ROMDATA PlatformMemoryTable[] = {
#define SEED_A 0x12
HW_RXEN_SEED(
ANY_SOCKET, CHANNEL_A, ALL_DIMMS,
@@ -182,7 +186,13 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
PSO_END
};
-const struct OEM_HOOK OemCustomize = {
- .InitEarly = OemInitEarly,
- .InitMid = OemInitMid,
-};
+void board_BeforeInitPost(struct sysinfo *cb, AMD_POST_PARAMS *InitPost)
+{
+ InitPost->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)PlatformMemoryTable;
+}
+
+void board_BeforeInitMid(struct sysinfo *cb, AMD_MID_PARAMS *InitMid)
+{
+ /* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */
+ InitMid->GnbMidConfiguration.iGpuVgaMode = 0;
+}
diff --git a/src/mainboard/biostar/am1ml/mainboard.c b/src/mainboard/biostar/am1ml/mainboard.c
index 076b30cf6e..f4ea2f3bab 100644
--- a/src/mainboard/biostar/am1ml/mainboard.c
+++ b/src/mainboard/biostar/am1ml/mainboard.c
@@ -25,7 +25,7 @@
#include <device/pci_def.h>
#include <arch/acpi.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
-#include <northbridge/amd/agesa/agesawrapper.h>
+#include <northbridge/amd/agesa/state_machine.h>
#include <southbridge/amd/agesa/hudson/pci_devs.h>
#include <southbridge/amd/agesa/hudson/amd_pci_int_defs.h>
#include <southbridge/amd/common/amd_pci_util.h>
@@ -111,9 +111,6 @@ static void mainboard_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
- if (acpi_is_wakeup_s3())
- agesawrapper_fchs3earlyrestore();
-
/* Initialize the PIRQ data structures for consumption */
pirq_setup();
}
diff --git a/src/mainboard/biostar/am1ml/romstage.c b/src/mainboard/biostar/am1ml/romstage.c
index f705b241aa..20708ccd47 100644
--- a/src/mainboard/biostar/am1ml/romstage.c
+++ b/src/mainboard/biostar/am1ml/romstage.c
@@ -14,27 +14,13 @@
* GNU General Public License for more details.
*/
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/acpi.h>
#include <arch/io.h>
-#include <arch/stages.h>
#include <device/pnp_def.h>
-#include <arch/cpu.h>
-#include <cpu/x86/lapic.h>
#include <console/console.h>
#include <commonlib/loglevel.h>
-#include <cpu/amd/car.h>
-#include <northbridge/amd/agesa/agesawrapper.h>
-#include <northbridge/amd/agesa/agesa_helper.h>
-#include <cpu/x86/bist.h>
-#include <cpu/x86/lapic.h>
+#include <northbridge/amd/agesa/state_machine.h>
#include <southbridge/amd/common/amd_defs.h>
#include <southbridge/amd/agesa/hudson/hudson.h>
-#include <cpu/amd/agesa/s3_resume.h>
-#include "cbmem.h"
#include <superio/ite/common/ite.h>
#include <superio/ite/it8728f/it8728f.h>
@@ -106,17 +92,13 @@ static void ite_gpio_conf(pnp_devfn_t dev)
ite_exit_conf (dev);
}
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+void board_BeforeAgesa(struct sysinfo *cb)
{
u32 val, t32;
u8 byte;
pci_devfn_t dev;
u32 *addr32;
- /* Must come first to enable PCI MMCONF. */
- amd_initmmio();
-
/* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
* LpcClk[1:0]". To be consistent with Parmer, setting to 4mA
* even though the register is not documented in the Kabini BKDG.
@@ -147,75 +129,17 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
t32 &= 0xffffbffb;
*addr32 = t32;
- if (!cpu_init_detectedx && boot_cpu()) {
- /* enable SIO LPC decode */
- dev = PCI_DEV(0, 0x14, 3);
- byte = pci_read_config8(dev, 0x48);
- byte |= 3; /* 2e, 2f */
- pci_write_config8(dev, 0x48, byte);
-
- /* enable serial decode */
- byte = pci_read_config8(dev, 0x44);
- byte |= (1 << 6); /* 0x3f8 */
- pci_write_config8(dev, 0x44, byte);
- post_code(0x30);
- post_code(0x31);
-
- /* run ite */
- ite_kill_watchdog(GPIO_DEV);
- ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
- console_init();
- }
- printk(BIOS_DEBUG, "Console inited!\n");
- /* Halt if there was a built in self test failure */
- post_code(0x34);
- report_bist_failure(bist);
-
-
- /* Load MPB */
- val = cpuid_eax(1);
- printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
- printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
-
- /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */
- int i;
- for(i = 0; i < 200000; i++)
- val = inb(0xcd6);
-
- post_code(0x37);
- agesawrapper_amdinitreset();
- post_code(0x38);
- printk(BIOS_DEBUG, "Got past yangtze_early_setup\n");
-
- post_code(0x39);
-
- agesawrapper_amdinitearly();
- int s3resume = acpi_is_wakeup_s3();
- if (!s3resume) {
- post_code(0x40);
- agesawrapper_amdinitpost();
- post_code(0x41);
- agesawrapper_amdinitenv();
- /* TODO: Disable cache is not ok. */
- disable_cache_as_ram();
- } else { /* S3 detect */
- printk(BIOS_INFO, "S3 detected\n");
-
- post_code(0x60);
- agesawrapper_amdinitresume();
-
- amd_initcpuio();
- agesawrapper_amds3laterestore();
-
- post_code(0x61);
- prepare_for_resume();
- }
+ /* enable SIO LPC decode */
+ dev = PCI_DEV(0, 0x14, 3);
+ byte = pci_read_config8(dev, 0x48);
+ byte |= 3; /* 2e, 2f */
+ pci_write_config8(dev, 0x48, byte);
- outb(0xEA, 0xCD6);
- outb(0x1, 0xcd7);
+ /* enable serial decode */
+ byte = pci_read_config8(dev, 0x44);
+ byte |= (1 << 6); /* 0x3f8 */
+ pci_write_config8(dev, 0x44, byte);
- post_code(0x50);
/* This functions configure SIO as it been done under vendor bios */
printk(BIOS_DEBUG, "ITE CONFIG ENVC\n");
ite_evc_conf(ENVC_DEV);
@@ -223,7 +147,17 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
ite_gpio_conf(GPIO_DEV);
printk(BIOS_DEBUG, "ITE CONFIG DONE\n");
- copy_and_run();
- post_code(0x54); /* Should never see this post code. */
+ ite_kill_watchdog(GPIO_DEV);
+ ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+
+ /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */
+ int i;
+ for(i = 0; i < 200000; i++)
+ val = inb(0xcd6);
+
+ outb(0xEA, 0xCD6);
+ outb(0x1, 0xcd7);
+
+ post_code(0x50);
}