diff options
| -rw-r--r-- | src/soc/amd/stoneyridge/smihandler.c | 26 |
1 files changed, 25 insertions, 1 deletions
diff --git a/src/soc/amd/stoneyridge/smihandler.c b/src/soc/amd/stoneyridge/smihandler.c index ef24baaac4..eeedba70d2 100644 --- a/src/soc/amd/stoneyridge/smihandler.c +++ b/src/soc/amd/stoneyridge/smihandler.c @@ -122,7 +122,8 @@ static void disable_all_smi_status(void) static void sb_slp_typ_handler(void) { - uint32_t pm1cnt, pci_ctrl; + uint32_t pm1cnt, pci_ctrl, reg32; + uint16_t reg16; uint8_t slp_typ, rst_ctrl; /* Figure out SLP_TYP */ @@ -171,6 +172,29 @@ static void sb_slp_typ_handler(void) rst_ctrl |= SLPTYPE_CONTROL_EN; pm_write8(PM_RST_CTRL1, rst_ctrl); + /* + * Before the final command, check if there's pending wake + * event. Read enable first, so that reading the actual status + * is as close as possible to entering S3. The idea is to + * minimize the opportunity for a wake event to happen before + * actually entering S3. If there's a pending wake event, log + * it and continue normal path. S3 will fail and the wake event + * becomes a SCI. + */ + if (IS_ENABLED(CONFIG_ELOG_GSMI)) { + reg16 = inw(ACPI_PM1_EN) & inw(ACPI_PM1_STS); + if (reg16) + elog_add_extended_event( + ELOG_SLEEP_PENDING_PM1_WAKE, + (u32)reg16); + + reg32 = inl(ACPI_GPE0_EN) & inl(ACPI_GPE0_STS); + if (reg32) + elog_add_extended_event( + ELOG_SLEEP_PENDING_GPE0_WAKE, + reg32); + } /* if (IS_ENABLED(CONFIG_ELOG_GSMI)) */ + /* Reissue Pm1 write */ outl(pm1cnt | SLP_EN, pm_acpi_pm_cnt_blk()); hlt(); |