summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/amd/inagua/BiosCallOuts.c980
-rw-r--r--src/mainboard/amd/inagua/BiosCallOuts.h12
-rw-r--r--src/mainboard/amd/inagua/Kconfig135
-rw-r--r--src/mainboard/amd/inagua/PlatformGnbPcie.c204
-rw-r--r--src/mainboard/amd/inagua/PlatformGnbPcieComplex.h15
-rw-r--r--src/mainboard/amd/inagua/acpi_tables.c2
-rw-r--r--src/mainboard/amd/inagua/agesawrapper.c148
-rw-r--r--src/mainboard/amd/inagua/agesawrapper.h18
-rw-r--r--src/mainboard/amd/inagua/buildOpts.c208
-rw-r--r--src/mainboard/amd/inagua/devicetree.cb120
-rw-r--r--src/mainboard/amd/inagua/dimmSpd.c146
-rw-r--r--src/mainboard/amd/inagua/get_bus_conf.c158
-rw-r--r--src/mainboard/amd/inagua/irq_tables.c6
-rw-r--r--src/mainboard/amd/inagua/mainboard.c30
-rw-r--r--src/mainboard/amd/inagua/mptable.c140
-rw-r--r--src/mainboard/amd/inagua/platform_cfg.h8
16 files changed, 1163 insertions, 1167 deletions
diff --git a/src/mainboard/amd/inagua/BiosCallOuts.c b/src/mainboard/amd/inagua/BiosCallOuts.c
index 434e83f78c..3c38239897 100644
--- a/src/mainboard/amd/inagua/BiosCallOuts.c
+++ b/src/mainboard/amd/inagua/BiosCallOuts.c
@@ -26,494 +26,494 @@
STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
- {AGESA_ALLOCATE_BUFFER,
- BiosAllocateBuffer
- },
+ {AGESA_ALLOCATE_BUFFER,
+ BiosAllocateBuffer
+ },
- {AGESA_DEALLOCATE_BUFFER,
- BiosDeallocateBuffer
- },
+ {AGESA_DEALLOCATE_BUFFER,
+ BiosDeallocateBuffer
+ },
- {AGESA_DO_RESET,
- BiosReset
- },
+ {AGESA_DO_RESET,
+ BiosReset
+ },
- {AGESA_LOCATE_BUFFER,
- BiosLocateBuffer
- },
+ {AGESA_LOCATE_BUFFER,
+ BiosLocateBuffer
+ },
- {AGESA_READ_SPD,
- BiosReadSpd
- },
+ {AGESA_READ_SPD,
+ BiosReadSpd
+ },
- {AGESA_READ_SPD_RECOVERY,
- BiosDefaultRet
- },
+ {AGESA_READ_SPD_RECOVERY,
+ BiosDefaultRet
+ },
- {AGESA_RUNFUNC_ONAP,
- BiosRunFuncOnAp
- },
+ {AGESA_RUNFUNC_ONAP,
+ BiosRunFuncOnAp
+ },
{AGESA_GNB_PCIE_SLOT_RESET,
- BiosGnbPcieSlotReset
+ BiosGnbPcieSlotReset
},
{AGESA_HOOKBEFORE_DRAM_INIT,
- BiosHookBeforeDramInit
+ BiosHookBeforeDramInit
},
{AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY,
- BiosHookBeforeDramInitRecovery
- },
+ BiosHookBeforeDramInitRecovery
+ },
- {AGESA_HOOKBEFORE_DQS_TRAINING,
- BiosHookBeforeDQSTraining
- },
+ {AGESA_HOOKBEFORE_DQS_TRAINING,
+ BiosHookBeforeDQSTraining
+ },
- {AGESA_HOOKBEFORE_EXIT_SELF_REF,
- BiosHookBeforeExitSelfRefresh
- },
+ {AGESA_HOOKBEFORE_EXIT_SELF_REF,
+ BiosHookBeforeExitSelfRefresh
+ },
};
AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- UINTN i;
- AGESA_STATUS CalloutStatus;
+ UINTN i;
+ AGESA_STATUS CalloutStatus;
UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]);
CalloutStatus = AGESA_UNSUPPORTED;
for (i = 0; i < CallOutCount; i++) {
if (BiosCallouts[i].CalloutName == Func) {
- CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
- return CalloutStatus;
- }
- }
+ CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
+ return CalloutStatus;
+ }
+ }
return CalloutStatus;
}
AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- UINT32 AvailableHeapSize;
- UINT8 *BiosHeapBaseAddr;
- UINT32 CurrNodeOffset;
- UINT32 PrevNodeOffset;
- UINT32 FreedNodeOffset;
- UINT32 BestFitNodeOffset;
- UINT32 BestFitPrevNodeOffset;
- UINT32 NextFreeOffset;
- BIOS_BUFFER_NODE *CurrNodePtr;
- BIOS_BUFFER_NODE *FreedNodePtr;
- BIOS_BUFFER_NODE *BestFitNodePtr;
- BIOS_BUFFER_NODE *BestFitPrevNodePtr;
- BIOS_BUFFER_NODE *NextFreePtr;
- BIOS_HEAP_MANAGER *BiosHeapBasePtr;
- AGESA_BUFFER_PARAMS *AllocParams;
-
- AllocParams = ((AGESA_BUFFER_PARAMS *) ConfigPtr);
- AllocParams->BufferPointer = NULL;
-
- AvailableHeapSize = BIOS_HEAP_SIZE - sizeof (BIOS_HEAP_MANAGER);
- BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
- BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
-
- if (BiosHeapBasePtr->StartOfAllocatedNodes == 0) {
- /* First allocation */
- CurrNodeOffset = sizeof (BIOS_HEAP_MANAGER);
- CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
- CurrNodePtr->BufferHandle = AllocParams->BufferHandle;
- CurrNodePtr->BufferSize = AllocParams->BufferLength;
- CurrNodePtr->NextNodeOffset = 0;
- AllocParams->BufferPointer = (UINT8 *) CurrNodePtr + sizeof (BIOS_BUFFER_NODE);
-
- /* Update the remaining free space */
- FreedNodeOffset = CurrNodeOffset + CurrNodePtr->BufferSize + sizeof (BIOS_BUFFER_NODE);
- FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
- FreedNodePtr->BufferSize = AvailableHeapSize - sizeof (BIOS_BUFFER_NODE) - CurrNodePtr->BufferSize;
- FreedNodePtr->NextNodeOffset = 0;
-
- /* Update the offsets for Allocated and Freed nodes */
- BiosHeapBasePtr->StartOfAllocatedNodes = CurrNodeOffset;
- BiosHeapBasePtr->StartOfFreedNodes = FreedNodeOffset;
- } else {
- /* Find out whether BufferHandle has been allocated on the heap. */
- /* If it has, return AGESA_BOUNDS_CHK */
- CurrNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
- CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
-
- while (CurrNodeOffset != 0) {
- CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
- if (CurrNodePtr->BufferHandle == AllocParams->BufferHandle) {
- return AGESA_BOUNDS_CHK;
- }
- CurrNodeOffset = CurrNodePtr->NextNodeOffset;
- /* If BufferHandle has not been allocated on the heap, CurrNodePtr here points
- to the end of the allocated nodes list.
- */
- }
- /* Find the node that best fits the requested buffer size */
- FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
- PrevNodeOffset = FreedNodeOffset;
- BestFitNodeOffset = 0;
- BestFitPrevNodeOffset = 0;
- while (FreedNodeOffset != 0) {
- FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
- if (FreedNodePtr->BufferSize >= (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
- if (BestFitNodeOffset == 0) {
- /* First node that fits the requested buffer size */
- BestFitNodeOffset = FreedNodeOffset;
- BestFitPrevNodeOffset = PrevNodeOffset;
- } else {
- /* Find out whether current node is a better fit than the previous nodes */
- BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
- if (BestFitNodePtr->BufferSize > FreedNodePtr->BufferSize) {
- BestFitNodeOffset = FreedNodeOffset;
- BestFitPrevNodeOffset = PrevNodeOffset;
- }
- }
- }
- PrevNodeOffset = FreedNodeOffset;
- FreedNodeOffset = FreedNodePtr->NextNodeOffset;
- } /* end of while loop */
-
-
- if (BestFitNodeOffset == 0) {
- /* If we could not find a node that fits the requested buffer */
- /* size, return AGESA_BOUNDS_CHK */
- return AGESA_BOUNDS_CHK;
- } else {
- BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
- BestFitPrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitPrevNodeOffset);
-
- /* If BestFitNode is larger than the requested buffer, fragment the node further */
- if (BestFitNodePtr->BufferSize > (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
- NextFreeOffset = BestFitNodeOffset + AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE);
-
- NextFreePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextFreeOffset);
- NextFreePtr->BufferSize = BestFitNodePtr->BufferSize - (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE));
- NextFreePtr->NextNodeOffset = BestFitNodePtr->NextNodeOffset;
- } else {
- /* Otherwise, next free node is NextNodeOffset of BestFitNode */
- NextFreeOffset = BestFitNodePtr->NextNodeOffset;
- }
-
- /* If BestFitNode is the first buffer in the list, then update
- StartOfFreedNodes to reflect the new free node
- */
- if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) {
- BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset;
- } else {
- BestFitPrevNodePtr->NextNodeOffset = NextFreeOffset;
- }
-
- /* Add BestFitNode to the list of Allocated nodes */
- CurrNodePtr->NextNodeOffset = BestFitNodeOffset;
- BestFitNodePtr->BufferSize = AllocParams->BufferLength;
- BestFitNodePtr->BufferHandle = AllocParams->BufferHandle;
- BestFitNodePtr->NextNodeOffset = 0;
-
- /* Remove BestFitNode from list of Freed nodes */
- AllocParams->BufferPointer = (UINT8 *) BestFitNodePtr + sizeof (BIOS_BUFFER_NODE);
- }
- }
-
- return AGESA_SUCCESS;
+ UINT32 AvailableHeapSize;
+ UINT8 *BiosHeapBaseAddr;
+ UINT32 CurrNodeOffset;
+ UINT32 PrevNodeOffset;
+ UINT32 FreedNodeOffset;
+ UINT32 BestFitNodeOffset;
+ UINT32 BestFitPrevNodeOffset;
+ UINT32 NextFreeOffset;
+ BIOS_BUFFER_NODE *CurrNodePtr;
+ BIOS_BUFFER_NODE *FreedNodePtr;
+ BIOS_BUFFER_NODE *BestFitNodePtr;
+ BIOS_BUFFER_NODE *BestFitPrevNodePtr;
+ BIOS_BUFFER_NODE *NextFreePtr;
+ BIOS_HEAP_MANAGER *BiosHeapBasePtr;
+ AGESA_BUFFER_PARAMS *AllocParams;
+
+ AllocParams = ((AGESA_BUFFER_PARAMS *) ConfigPtr);
+ AllocParams->BufferPointer = NULL;
+
+ AvailableHeapSize = BIOS_HEAP_SIZE - sizeof (BIOS_HEAP_MANAGER);
+ BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+ BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+ if (BiosHeapBasePtr->StartOfAllocatedNodes == 0) {
+ /* First allocation */
+ CurrNodeOffset = sizeof (BIOS_HEAP_MANAGER);
+ CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+ CurrNodePtr->BufferHandle = AllocParams->BufferHandle;
+ CurrNodePtr->BufferSize = AllocParams->BufferLength;
+ CurrNodePtr->NextNodeOffset = 0;
+ AllocParams->BufferPointer = (UINT8 *) CurrNodePtr + sizeof (BIOS_BUFFER_NODE);
+
+ /* Update the remaining free space */
+ FreedNodeOffset = CurrNodeOffset + CurrNodePtr->BufferSize + sizeof (BIOS_BUFFER_NODE);
+ FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+ FreedNodePtr->BufferSize = AvailableHeapSize - sizeof (BIOS_BUFFER_NODE) - CurrNodePtr->BufferSize;
+ FreedNodePtr->NextNodeOffset = 0;
+
+ /* Update the offsets for Allocated and Freed nodes */
+ BiosHeapBasePtr->StartOfAllocatedNodes = CurrNodeOffset;
+ BiosHeapBasePtr->StartOfFreedNodes = FreedNodeOffset;
+ } else {
+ /* Find out whether BufferHandle has been allocated on the heap. */
+ /* If it has, return AGESA_BOUNDS_CHK */
+ CurrNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+ CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+
+ while (CurrNodeOffset != 0) {
+ CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+ if (CurrNodePtr->BufferHandle == AllocParams->BufferHandle) {
+ return AGESA_BOUNDS_CHK;
+ }
+ CurrNodeOffset = CurrNodePtr->NextNodeOffset;
+ /* If BufferHandle has not been allocated on the heap, CurrNodePtr here points
+ to the end of the allocated nodes list.
+ */
+ }
+ /* Find the node that best fits the requested buffer size */
+ FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
+ PrevNodeOffset = FreedNodeOffset;
+ BestFitNodeOffset = 0;
+ BestFitPrevNodeOffset = 0;
+ while (FreedNodeOffset != 0) {
+ FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+ if (FreedNodePtr->BufferSize >= (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
+ if (BestFitNodeOffset == 0) {
+ /* First node that fits the requested buffer size */
+ BestFitNodeOffset = FreedNodeOffset;
+ BestFitPrevNodeOffset = PrevNodeOffset;
+ } else {
+ /* Find out whether current node is a better fit than the previous nodes */
+ BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
+ if (BestFitNodePtr->BufferSize > FreedNodePtr->BufferSize) {
+ BestFitNodeOffset = FreedNodeOffset;
+ BestFitPrevNodeOffset = PrevNodeOffset;
+ }
+ }
+ }
+ PrevNodeOffset = FreedNodeOffset;
+ FreedNodeOffset = FreedNodePtr->NextNodeOffset;
+ } /* end of while loop */
+
+
+ if (BestFitNodeOffset == 0) {
+ /* If we could not find a node that fits the requested buffer */
+ /* size, return AGESA_BOUNDS_CHK */
+ return AGESA_BOUNDS_CHK;
+ } else {
+ BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
+ BestFitPrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitPrevNodeOffset);
+
+ /* If BestFitNode is larger than the requested buffer, fragment the node further */
+ if (BestFitNodePtr->BufferSize > (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
+ NextFreeOffset = BestFitNodeOffset + AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE);
+
+ NextFreePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextFreeOffset);
+ NextFreePtr->BufferSize = BestFitNodePtr->BufferSize - (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE));
+ NextFreePtr->NextNodeOffset = BestFitNodePtr->NextNodeOffset;
+ } else {
+ /* Otherwise, next free node is NextNodeOffset of BestFitNode */
+ NextFreeOffset = BestFitNodePtr->NextNodeOffset;
+ }
+
+ /* If BestFitNode is the first buffer in the list, then update
+ StartOfFreedNodes to reflect the new free node
+ */
+ if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) {
+ BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset;
+ } else {
+ BestFitPrevNodePtr->NextNodeOffset = NextFreeOffset;
+ }
+
+ /* Add BestFitNode to the list of Allocated nodes */
+ CurrNodePtr->NextNodeOffset = BestFitNodeOffset;
+ BestFitNodePtr->BufferSize = AllocParams->BufferLength;
+ BestFitNodePtr->BufferHandle = AllocParams->BufferHandle;
+ BestFitNodePtr->NextNodeOffset = 0;
+
+ /* Remove BestFitNode from list of Freed nodes */
+ AllocParams->BufferPointer = (UINT8 *) BestFitNodePtr + sizeof (BIOS_BUFFER_NODE);
+ }
+ }
+
+ return AGESA_SUCCESS;
}
AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- UINT8 *BiosHeapBaseAddr;
- UINT32 AllocNodeOffset;
- UINT32 PrevNodeOffset;
- UINT32 NextNodeOffset;
- UINT32 FreedNodeOffset;
- UINT32 EndNodeOffset;
- BIOS_BUFFER_NODE *AllocNodePtr;
- BIOS_BUFFER_NODE *PrevNodePtr;
- BIOS_BUFFER_NODE *FreedNodePtr;
- BIOS_BUFFER_NODE *NextNodePtr;
- BIOS_HEAP_MANAGER *BiosHeapBasePtr;
- AGESA_BUFFER_PARAMS *AllocParams;
-
- BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
- BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
-
- AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
-
- /* Find target node to deallocate in list of allocated nodes.
- Return AGESA_BOUNDS_CHK if the BufferHandle is not found
- */
- AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
- AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
- PrevNodeOffset = AllocNodeOffset;
-
- while (AllocNodePtr->BufferHandle != AllocParams->BufferHandle) {
- if (AllocNodePtr->NextNodeOffset == 0) {
- return AGESA_BOUNDS_CHK;
- }
- PrevNodeOffset = AllocNodeOffset;
- AllocNodeOffset = AllocNodePtr->NextNodeOffset;
- AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
- }
-
- /* Remove target node from list of allocated nodes */
- PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
- PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
-
- /* Zero out the buffer, and clear the BufferHandle */
- LibAmdMemFill ((UINT8 *)AllocNodePtr + sizeof (BIOS_BUFFER_NODE), 0, AllocNodePtr->BufferSize, &(AllocParams->StdHeader));
- AllocNodePtr->BufferHandle = 0;
- AllocNodePtr->BufferSize += sizeof (BIOS_BUFFER_NODE);
-
- /* Add deallocated node in order to the list of freed nodes */
- FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
- FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
-
- EndNodeOffset = AllocNodeOffset + AllocNodePtr->BufferSize;
-
- if (AllocNodeOffset < FreedNodeOffset) {
- /* Add to the start of the freed list */
- if (EndNodeOffset == FreedNodeOffset) {
- /* If the freed node is adjacent to the first node in the list, concatenate both nodes */
- AllocNodePtr->BufferSize += FreedNodePtr->BufferSize;
- AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset;
-
- /* Clear the BufferSize and NextNodeOffset of the previous first node */
- FreedNodePtr->BufferSize = 0;
- FreedNodePtr->NextNodeOffset = 0;
- } else {
- /* Otherwise, add freed node to the start of the list
- Update NextNodeOffset and BufferSize to include the
- size of BIOS_BUFFER_NODE
- */
- AllocNodePtr->NextNodeOffset = FreedNodeOffset;
- }
- /* Update StartOfFreedNodes to the new first node */
- BiosHeapBasePtr->StartOfFreedNodes = AllocNodeOffset;
- } else {
- /* Traverse list of freed nodes to find where the deallocated node
- should be place
- */
- NextNodeOffset = FreedNodeOffset;
- NextNodePtr = FreedNodePtr;
- while (AllocNodeOffset > NextNodeOffset) {
- PrevNodeOffset = NextNodeOffset;
- if (NextNodePtr->NextNodeOffset == 0) {
- break;
- }
- NextNodeOffset = NextNodePtr->NextNodeOffset;
- NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
- }
-
- /* If deallocated node is adjacent to the next node,
- concatenate both nodes
- */
- if (NextNodeOffset == EndNodeOffset) {
- NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
- AllocNodePtr->BufferSize += NextNodePtr->BufferSize;
- AllocNodePtr->NextNodeOffset = NextNodePtr->NextNodeOffset;
-
- NextNodePtr->BufferSize = 0;
- NextNodePtr->NextNodeOffset = 0;
- } else {
- /*AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset; */
- AllocNodePtr->NextNodeOffset = NextNodeOffset;
- }
- /* If deallocated node is adjacent to the previous node,
- concatenate both nodes
- */
- PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
- EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize;
- if (AllocNodeOffset == EndNodeOffset) {
- PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
- PrevNodePtr->BufferSize += AllocNodePtr->BufferSize;
- AllocNodePtr->BufferSize = 0;
- AllocNodePtr->NextNodeOffset = 0;
- } else {
- PrevNodePtr->NextNodeOffset = AllocNodeOffset;
- }
- }
- return AGESA_SUCCESS;
+ UINT8 *BiosHeapBaseAddr;
+ UINT32 AllocNodeOffset;
+ UINT32 PrevNodeOffset;
+ UINT32 NextNodeOffset;
+ UINT32 FreedNodeOffset;
+ UINT32 EndNodeOffset;
+ BIOS_BUFFER_NODE *AllocNodePtr;
+ BIOS_BUFFER_NODE *PrevNodePtr;
+ BIOS_BUFFER_NODE *FreedNodePtr;
+ BIOS_BUFFER_NODE *NextNodePtr;
+ BIOS_HEAP_MANAGER *BiosHeapBasePtr;
+ AGESA_BUFFER_PARAMS *AllocParams;
+
+ BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+ BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+ AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
+
+ /* Find target node to deallocate in list of allocated nodes.
+ Return AGESA_BOUNDS_CHK if the BufferHandle is not found
+ */
+ AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+ AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+ PrevNodeOffset = AllocNodeOffset;
+
+ while (AllocNodePtr->BufferHandle != AllocParams->BufferHandle) {
+ if (AllocNodePtr->NextNodeOffset == 0) {
+ return AGESA_BOUNDS_CHK;
+ }
+ PrevNodeOffset = AllocNodeOffset;
+ AllocNodeOffset = AllocNodePtr->NextNodeOffset;
+ AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+ }
+
+ /* Remove target node from list of allocated nodes */
+ PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
+ PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
+
+ /* Zero out the buffer, and clear the BufferHandle */
+ LibAmdMemFill ((UINT8 *)AllocNodePtr + sizeof (BIOS_BUFFER_NODE), 0, AllocNodePtr->BufferSize, &(AllocParams->StdHeader));
+ AllocNodePtr->BufferHandle = 0;
+ AllocNodePtr->BufferSize += sizeof (BIOS_BUFFER_NODE);
+
+ /* Add deallocated node in order to the list of freed nodes */
+ FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
+ FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+
+ EndNodeOffset = AllocNodeOffset + AllocNodePtr->BufferSize;
+
+ if (AllocNodeOffset < FreedNodeOffset) {
+ /* Add to the start of the freed list */
+ if (EndNodeOffset == FreedNodeOffset) {
+ /* If the freed node is adjacent to the first node in the list, concatenate both nodes */
+ AllocNodePtr->BufferSize += FreedNodePtr->BufferSize;
+ AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset;
+
+ /* Clear the BufferSize and NextNodeOffset of the previous first node */
+ FreedNodePtr->BufferSize = 0;
+ FreedNodePtr->NextNodeOffset = 0;
+ } else {
+ /* Otherwise, add freed node to the start of the list
+ Update NextNodeOffset and BufferSize to include the
+ size of BIOS_BUFFER_NODE
+ */
+ AllocNodePtr->NextNodeOffset = FreedNodeOffset;
+ }
+ /* Update StartOfFreedNodes to the new first node */
+ BiosHeapBasePtr->StartOfFreedNodes = AllocNodeOffset;
+ } else {
+ /* Traverse list of freed nodes to find where the deallocated node
+ should be place
+ */
+ NextNodeOffset = FreedNodeOffset;
+ NextNodePtr = FreedNodePtr;
+ while (AllocNodeOffset > NextNodeOffset) {
+ PrevNodeOffset = NextNodeOffset;
+ if (NextNodePtr->NextNodeOffset == 0) {
+ break;
+ }
+ NextNodeOffset = NextNodePtr->NextNodeOffset;
+ NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
+ }
+
+ /* If deallocated node is adjacent to the next node,
+ concatenate both nodes
+ */
+ if (NextNodeOffset == EndNodeOffset) {
+ NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
+ AllocNodePtr->BufferSize += NextNodePtr->BufferSize;
+ AllocNodePtr->NextNodeOffset = NextNodePtr->NextNodeOffset;
+
+ NextNodePtr->BufferSize = 0;
+ NextNodePtr->NextNodeOffset = 0;
+ } else {
+ /*AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset; */
+ AllocNodePtr->NextNodeOffset = NextNodeOffset;
+ }
+ /* If deallocated node is adjacent to the previous node,
+ concatenate both nodes
+ */
+ PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
+ EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize;
+ if (AllocNodeOffset == EndNodeOffset) {
+ PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
+ PrevNodePtr->BufferSize += AllocNodePtr->BufferSize;
+ AllocNodePtr->BufferSize = 0;
+ AllocNodePtr->NextNodeOffset = 0;
+ } else {
+ PrevNodePtr->NextNodeOffset = AllocNodeOffset;
+ }
+ }
+ return AGESA_SUCCESS;
}
AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- UINT32 AllocNodeOffset;
- UINT8 *BiosHeapBaseAddr;
- BIOS_BUFFER_NODE *AllocNodePtr;
- BIOS_HEAP_MANAGER *BiosHeapBasePtr;
- AGESA_BUFFER_PARAMS *AllocParams;
-
- AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
-
- BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
- BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
-
- AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
- AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+ UINT32 AllocNodeOffset;
+ UINT8 *BiosHeapBaseAddr;
+ BIOS_BUFFER_NODE *AllocNodePtr;
+ BIOS_HEAP_MANAGER *BiosHeapBasePtr;
+ AGESA_BUFFER_PARAMS *AllocParams;
+
+ AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
+
+ BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+ BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+ AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+ AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+
+ while (AllocParams->BufferHandle != AllocNodePtr->BufferHandle) {
+ if (AllocNodePtr->NextNodeOffset == 0) {
+ AllocParams->BufferPointer = NULL;
+ AllocParams->BufferLength = 0;
+ return AGESA_BOUNDS_CHK;
+ } else {
+ AllocNodeOffset = AllocNodePtr->NextNodeOffset;
+ AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+ }
+ }
+
+ AllocParams->BufferPointer = (UINT8 *) ((UINT8 *) AllocNodePtr + sizeof (BIOS_BUFFER_NODE));
+ AllocParams->BufferLength = AllocNodePtr->BufferSize;
- while (AllocParams->BufferHandle != AllocNodePtr->BufferHandle) {
- if (AllocNodePtr->NextNodeOffset == 0) {
- AllocParams->BufferPointer = NULL;
- AllocParams->BufferLength = 0;
- return AGESA_BOUNDS_CHK;
- } else {
- AllocNodeOffset = AllocNodePtr->NextNodeOffset;
- AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
- }
- }
-
- AllocParams->BufferPointer = (UINT8 *) ((UINT8 *) AllocNodePtr + sizeof (BIOS_BUFFER_NODE));
- AllocParams->BufferLength = AllocNodePtr->BufferSize;
-
- return AGESA_SUCCESS;
+ return AGESA_SUCCESS;
}
AGESA_STATUS BiosRunFuncOnAp (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
+ AGESA_STATUS Status;
Status = agesawrapper_amdlaterunaptask (Func, Data, ConfigPtr);
- return Status;
+ return Status;
}
AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINT8 Value;
- UINTN ResetType;
- AMD_CONFIG_PARAMS *StdHeader;
-
- ResetType = Data;
- StdHeader = ConfigPtr;
-
- //
- // Perform the RESET based upon the ResetType. In case of
- // WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to
- // AmdResetManager. During the critical condition, where reset is required
- // immediately, the reset will be invoked directly by writing 0x04 to port
- // 0xCF9 (Reset Port).
- //
- switch (ResetType) {
- case WARM_RESET_WHENEVER:
- case COLD_RESET_WHENEVER:
- break;
-
- case WARM_RESET_IMMEDIATELY:
- case COLD_RESET_IMMEDIATELY:
- Value = 0x06;
- LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader);
- break;
-
- default:
- break;
- }
-
- Status = 0;
- return Status;
+ AGESA_STATUS Status;
+ UINT8 Value;
+ UINTN ResetType;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ ResetType = Data;
+ StdHeader = ConfigPtr;
+
+ //
+ // Perform the RESET based upon the ResetType. In case of
+ // WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to
+ // AmdResetManager. During the critical condition, where reset is required
+ // immediately, the reset will be invoked directly by writing 0x04 to port
+ // 0xCF9 (Reset Port).
+ //
+ switch (ResetType) {
+ case WARM_RESET_WHENEVER:
+ case COLD_RESET_WHENEVER:
+ break;
+
+ case WARM_RESET_IMMEDIATELY:
+ case COLD_RESET_IMMEDIATELY:
+ Value = 0x06;
+ LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader);
+ break;
+
+ default:
+ break;
+ }
+
+ Status = 0;
+ return Status;
}
AGESA_STATUS BiosReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
+ AGESA_STATUS Status;
Status = AmdMemoryReadSPD (Func, Data, (AGESA_READ_SPD_PARAMS *)ConfigPtr);
- return Status;
+ return Status;
}
AGESA_STATUS BiosDefaultRet (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- return AGESA_UNSUPPORTED;
+ return AGESA_UNSUPPORTED;
}
/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- return AGESA_SUCCESS;
+ return AGESA_SUCCESS;
}
/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINTN FcnData;
- MEM_DATA_STRUCT *MemData;
- UINT32 AcpiMmioAddr;
- UINT32 GpioMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
- UINT8 TempData8;
-
- FcnData = Data;
- MemData = ConfigPtr;
-
- Status = AGESA_SUCCESS;
+ AGESA_STATUS Status;
+ UINTN FcnData;
+ MEM_DATA_STRUCT *MemData;
+ UINT32 AcpiMmioAddr;
+ UINT32 GpioMmioAddr;
+ UINT8 Data8;
+ UINT16 Data16;
+ UINT8 TempData8;
+
+ FcnData = Data;
+ MemData = ConfigPtr;
+
+ Status = AGESA_SUCCESS;
/* Get SB MMIO Base (AcpiMmioAddr) */
- WriteIo8 (0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16 = Data8<<8;
- WriteIo8 (0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16 |= Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
-
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
-
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
-
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
-
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
-
- switch(MemData->ParameterListPtr->DDR3Voltage){
- case VOLT1_35:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_25:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_5:
- default:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- }
- return Status;
+ WriteIo8 (0xCD6, 0x27);
+ Data8 = ReadIo8(0xCD7);
+ Data16 = Data8<<8;
+ WriteIo8 (0xCD6, 0x26);
+ Data8 = ReadIo8(0xCD7);
+ Data16 |= Data8;
+ AcpiMmioAddr = (UINT32)Data16 << 16;
+ GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
+
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~BIT5;
+ TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
+ TempData8 &= 0x03;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
+
+ Data8 |= BIT2+BIT3;
+ Data8 &= ~BIT4;
+ TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
+ TempData8 &= 0x23;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
+
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~BIT5;
+ TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
+ TempData8 &= 0x03;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
+
+ Data8 |= BIT2+BIT3;
+ Data8 &= ~BIT4;
+ TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
+ TempData8 &= 0x23;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
+
+ switch(MemData->ParameterListPtr->DDR3Voltage){
+ case VOLT1_35:
+ Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
+ Data8 |= (UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ break;
+ case VOLT1_25:
+ Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ break;
+ case VOLT1_5:
+ default:
+ Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
+ Data8 |= (UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ }
+ return Status;
}
/* Call the host environment interface to provide a user hook opportunity. */
@@ -525,82 +525,82 @@ AGESA_STATUS BiosHookBeforeDramInitRecovery (UINT32 Func, UINT32 Data, VOID *Con
/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- return AGESA_SUCCESS;
+ return AGESA_SUCCESS;
}
/* PCIE slot reset control */
AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINTN FcnData;
- PCIe_SLOT_RESET_INFO *ResetInfo;
-
- UINT32 GpioMmioAddr;
- UINT32 AcpiMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
-
- FcnData = Data;
- ResetInfo = ConfigPtr;
- // Get SB800 MMIO Base (AcpiMmioAddr)
- WriteIo8(0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16=Data8<<8;
- WriteIo8(0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16|=Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- Status = AGESA_UNSUPPORTED;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
- switch (ResetInfo->ResetId)
- {
- case 4:
- switch (ResetInfo->ResetControl) {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 &= ~(UINT8)BIT6 ;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 |= BIT6 ;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- case 6:
- switch (ResetInfo->ResetControl) {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 &= ~(UINT8)BIT6 ;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 |= BIT6 ;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- case 7:
- switch (ResetInfo->ResetControl) {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
- Data8 &= ~(UINT8)BIT6 ;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 |= BIT6 ;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- }
- return Status;
+ AGESA_STATUS Status;
+ UINTN FcnData;
+ PCIe_SLOT_RESET_INFO *ResetInfo;
+
+ UINT32 GpioMmioAddr;
+ UINT32 AcpiMmioAddr;
+ UINT8 Data8;
+ UINT16 Data16;
+
+ FcnData = Data;
+ ResetInfo = ConfigPtr;
+ // Get SB800 MMIO Base (AcpiMmioAddr)
+ WriteIo8(0xCD6, 0x27);
+ Data8 = ReadIo8(0xCD7);
+ Data16=Data8<<8;
+ WriteIo8(0xCD6, 0x26);
+ Data8 = ReadIo8(0xCD7);
+ Data16|=Data8;
+ AcpiMmioAddr = (UINT32)Data16 << 16;
+ Status = AGESA_UNSUPPORTED;
+ GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
+ switch (ResetInfo->ResetId)
+ {
+ case 4:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
+ Data8 &= ~(UINT8)BIT6 ;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
+ Data8 |= BIT6 ;
+ Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ case 6:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
+ Data8 &= ~(UINT8)BIT6 ;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
+ Data8 |= BIT6 ;
+ Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ case 7:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
+ Data8 &= ~(UINT8)BIT6 ;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
+ Data8 |= BIT6 ;
+ Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ }
+ return Status;
}
diff --git a/src/mainboard/amd/inagua/BiosCallOuts.h b/src/mainboard/amd/inagua/BiosCallOuts.h
index f7124b93a3..e713ac360d 100644
--- a/src/mainboard/amd/inagua/BiosCallOuts.h
+++ b/src/mainboard/amd/inagua/BiosCallOuts.h
@@ -28,15 +28,15 @@
#define BIOS_HEAP_SIZE 0x20000 /* 64MB */
typedef struct _BIOS_HEAP_MANAGER {
- //UINT32 AvailableSize;
- UINT32 StartOfAllocatedNodes;
- UINT32 StartOfFreedNodes;
+ //UINT32 AvailableSize;
+ UINT32 StartOfAllocatedNodes;
+ UINT32 StartOfFreedNodes;
} BIOS_HEAP_MANAGER;
typedef struct _BIOS_BUFFER_NODE {
- UINT32 BufferHandle;
- UINT32 BufferSize;
- UINT32 NextNodeOffset;
+ UINT32 BufferHandle;
+ UINT32 BufferSize;
+ UINT32 NextNodeOffset;
} BIOS_BUFFER_NODE;
/*
* CALLOUTS
diff --git a/src/mainboard/amd/inagua/Kconfig b/src/mainboard/amd/inagua/Kconfig
index b0c5f1a906..a5920af57d 100644
--- a/src/mainboard/amd/inagua/Kconfig
+++ b/src/mainboard/amd/inagua/Kconfig
@@ -20,108 +20,108 @@
if BOARD_AMD_INAGUA
config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select ARCH_X86
- select CPU_AMD_AGESA_FAMILY14
- select NORTHBRIDGE_AMD_AGESA_FAMILY14_ROOT_COMPLEX
- select NORTHBRIDGE_AMD_AGESA_FAMILY14
- select SOUTHBRIDGE_AMD_CIMX_SB800
- select SUPERIO_SMSC_KBC1100
- select BOARD_HAS_FADT
- select HAVE_BUS_CONFIG
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select HAVE_MAINBOARD_RESOURCES
- select HAVE_HARD_RESET
- select SB_HT_CHAIN_UNITID_OFFSET_ONLY
- select LIFT_BSP_APIC_ID
- select SERIAL_CPU_INIT
- select AMDMCT
- select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_2048
- select ENABLE_APIC_EXT_ID
- select GFXUMA
+ def_bool y
+ select ARCH_X86
+ select CPU_AMD_AGESA_FAMILY14
+ select NORTHBRIDGE_AMD_AGESA_FAMILY14_ROOT_COMPLEX
+ select NORTHBRIDGE_AMD_AGESA_FAMILY14
+ select SOUTHBRIDGE_AMD_CIMX_SB800
+ select SUPERIO_SMSC_KBC1100
+ select BOARD_HAS_FADT
+ select HAVE_BUS_CONFIG
+ select HAVE_OPTION_TABLE
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select HAVE_MAINBOARD_RESOURCES
+ select HAVE_HARD_RESET
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
+ select LIFT_BSP_APIC_ID
+ select SERIAL_CPU_INIT
+ select AMDMCT
+ select HAVE_ACPI_TABLES
+ select BOARD_ROMSIZE_KB_2048
+ select ENABLE_APIC_EXT_ID
+ select GFXUMA
config AMD_AGESA
- bool
- default y
+ bool
+ default y
config MAINBOARD_DIR
- string
- default amd/inagua
+ string
+ default amd/inagua
config APIC_ID_OFFSET
- hex
- default 0x0
+ hex
+ default 0x0
config MAINBOARD_PART_NUMBER
- string
- default "Inagua"
+ string
+ default "Inagua"
config HW_MEM_HOLE_SIZEK
- hex
- default 0x200000
+ hex
+ default 0x200000
config MAX_CPUS
- int
- default 2
+ int
+ default 2
config MAX_PHYSICAL_CPUS
- int
- default 1
+ int
+ default 1
config HW_MEM_HOLE_SIZE_AUTO_INC
- bool
- default n
+ bool
+ default n
config MEM_TRAIN_SEQ
- int
- default 2
+ int
+ default 2
config IRQ_SLOT_COUNT
- int
- default 11
+ int
+ default 11
config RAMTOP
- hex
- default 0x1000000
+ hex
+ default 0x1000000
config HEAP_SIZE
- hex
- default 0xc0000
+ hex
+ default 0xc0000
config STACK_SIZE
- hex
- default 0x10000
+ hex
+ default 0x10000
config ACPI_SSDTX_NUM
- int
- default 0
+ int
+ default 0
config RAMBASE
- hex
- default 0x200000
+ hex
+ default 0x200000
config SIO_PORT
- hex
- default 0x2e
+ hex
+ default 0x2e
config DRIVERS_PS2_KEYBOARD
- bool
- default y
+ bool
+ default y
config WARNINGS_ARE_ERRORS
- bool
- default n
+ bool
+ default n
config ONBOARD_VGA_IS_PRIMARY
- bool
- default y
+ bool
+ default y
config VGA_BIOS
- bool
- default n
+ bool
+ default n
#config VGA_BIOS_FILE
# string "VGA BIOS path and filename"
@@ -129,14 +129,13 @@ config VGA_BIOS
# default "rom/video/OntarioGenericVBios.bin"
config VGA_BIOS_ID
- string "VGA device PCI IDs"
- depends on VGA_BIOS
- default "1002,9802"
+ string "VGA device PCI IDs"
+ depends on VGA_BIOS
+ default "1002,9802"
config SB800_AHCI_ROM
- bool
- default n
-
+ bool
+ default n
endif # BOARD_AMD_INAGUA
diff --git a/src/mainboard/amd/inagua/PlatformGnbPcie.c b/src/mainboard/amd/inagua/PlatformGnbPcie.c
index f758006b95..539ca48dc8 100644
--- a/src/mainboard/amd/inagua/PlatformGnbPcie.c
+++ b/src/mainboard/amd/inagua/PlatformGnbPcie.c
@@ -44,8 +44,8 @@
/*---------------------------------------------------------------------------------------*/
VOID
OemCustomizeInitEarly (
- IN OUT AMD_EARLY_PARAMS *InitEarly
- )
+ IN OUT AMD_EARLY_PARAMS *InitEarly
+ )
{
AGESA_STATUS Status;
VOID *BrazosPcieComplexListPtr;
@@ -54,105 +54,105 @@ OemCustomizeInitEarly (
ALLOCATE_HEAP_PARAMS AllocHeapParams;
-PCIe_PORT_DESCRIPTOR PortList [] = {
- // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) MXM
- {
- 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
- PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 5),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 4)
- },
- // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) PCIE LAN
- {
- 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
- PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 6)
- },
- // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) MINIPCIE SLOT1
- {
- 0,
- PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 7)
- },
- // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...)
- {
- DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
- PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0)
- }
-};
-
-PCIe_DDI_DESCRIPTOR DdiList [] = {
- // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) DP0 to LVDS
- {
- 0, //Descriptor flags
- PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
- PCIE_DDI_DATA_INITIALIZER (ConnectorTypeLvds, Aux1, Hdp1)
- },
- // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) DP1 to VGA
- {
- DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
- PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
- PCIE_DDI_DATA_INITIALIZER (ConnectorTypeAutoDetect, Aux2, Hdp2)
- }
-};
-
-PCIe_COMPLEX_DESCRIPTOR Brazos = {
- DESCRIPTOR_TERMINATE_LIST,
- 0,
- &PortList[0],
- &DdiList[0]
-};
-
- // GNB PCIe topology Porting
-
- //
- // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR
- //
- AllocHeapParams.RequestedBufferSize = (sizeof (PCIe_COMPLEX_DESCRIPTOR) +
- sizeof (PCIe_PORT_DESCRIPTOR) * 5 +
- sizeof (PCIe_DDI_DESCRIPTOR)) * 2;
-
- AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START;
- AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
- Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader);
- if ( Status!= AGESA_SUCCESS) {
- // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR
- ASSERT(FALSE);
- return;
- }
-
- BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
-
- AllocHeapParams.BufferPtr += sizeof (PCIe_COMPLEX_DESCRIPTOR);
- BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr;
-
- AllocHeapParams.BufferPtr += sizeof (PCIe_PORT_DESCRIPTOR) * 5;
- BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr;
-
- LibAmdMemFill (BrazosPcieComplexListPtr,
- 0,
- sizeof (PCIe_COMPLEX_DESCRIPTOR),
- &InitEarly->StdHeader);
-
- LibAmdMemFill (BrazosPciePortPtr,
- 0,
- sizeof (PCIe_PORT_DESCRIPTOR) * 5,
- &InitEarly->StdHeader);
-
- LibAmdMemFill (BrazosPcieDdiPtr,
- 0,
- sizeof (PCIe_DDI_DESCRIPTOR) * 2,
- &InitEarly->StdHeader);
-
- LibAmdMemCopy (BrazosPcieComplexListPtr, &Brazos, sizeof (PCIe_COMPLEX_DESCRIPTOR), &InitEarly->StdHeader);
- LibAmdMemCopy (BrazosPciePortPtr, &PortList[0], sizeof (PCIe_PORT_DESCRIPTOR) * 5, &InitEarly->StdHeader);
- LibAmdMemCopy (BrazosPcieDdiPtr, &DdiList[0], sizeof (PCIe_DDI_DESCRIPTOR) *2, &InitEarly->StdHeader);
-
-
- ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr;
- ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr;
-
- InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr;
- InitEarly->GnbConfig.PsppPolicy = 0;
+ PCIe_PORT_DESCRIPTOR PortList [] = {
+ // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) MXM
+ {
+ 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 5),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 4)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) PCIE LAN
+ {
+ 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 6)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) MINIPCIE SLOT1
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 7)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...)
+ {
+ DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0)
+ }
+ };
+
+ PCIe_DDI_DESCRIPTOR DdiList [] = {
+ // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) DP0 to LVDS
+ {
+ 0, //Descriptor flags
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeLvds, Aux1, Hdp1)
+ },
+ // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) DP1 to VGA
+ {
+ DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeAutoDetect, Aux2, Hdp2)
+ }
+ };
+
+ PCIe_COMPLEX_DESCRIPTOR Brazos = {
+ DESCRIPTOR_TERMINATE_LIST,
+ 0,
+ &PortList[0],
+ &DdiList[0]
+ };
+
+ // GNB PCIe topology Porting
+
+ //
+ // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR
+ //
+ AllocHeapParams.RequestedBufferSize = (sizeof (PCIe_COMPLEX_DESCRIPTOR) +
+ sizeof (PCIe_PORT_DESCRIPTOR) * 5 +
+ sizeof (PCIe_DDI_DESCRIPTOR)) * 2;
+
+ AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader);
+ if ( Status!= AGESA_SUCCESS) {
+ // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR
+ ASSERT(FALSE);
+ return;
+ }
+
+ BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+
+ AllocHeapParams.BufferPtr += sizeof (PCIe_COMPLEX_DESCRIPTOR);
+ BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr;
+
+ AllocHeapParams.BufferPtr += sizeof (PCIe_PORT_DESCRIPTOR) * 5;
+ BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+
+ LibAmdMemFill (BrazosPcieComplexListPtr,
+ 0,
+ sizeof (PCIe_COMPLEX_DESCRIPTOR),
+ &InitEarly->StdHeader);
+
+ LibAmdMemFill (BrazosPciePortPtr,
+ 0,
+ sizeof (PCIe_PORT_DESCRIPTOR) * 5,
+ &InitEarly->StdHeader);
+
+ LibAmdMemFill (BrazosPcieDdiPtr,
+ 0,
+ sizeof (PCIe_DDI_DESCRIPTOR) * 2,
+ &InitEarly->StdHeader);
+
+ LibAmdMemCopy (BrazosPcieComplexListPtr, &Brazos, sizeof (PCIe_COMPLEX_DESCRIPTOR), &InitEarly->StdHeader);
+ LibAmdMemCopy (BrazosPciePortPtr, &PortList[0], sizeof (PCIe_PORT_DESCRIPTOR) * 5, &InitEarly->StdHeader);
+ LibAmdMemCopy (BrazosPcieDdiPtr, &DdiList[0], sizeof (PCIe_DDI_DESCRIPTOR) *2, &InitEarly->StdHeader);
+
+
+ ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr;
+ ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr;
+
+ InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr;
+ InitEarly->GnbConfig.PsppPolicy = 0;
}
diff --git a/src/mainboard/amd/inagua/PlatformGnbPcieComplex.h b/src/mainboard/amd/inagua/PlatformGnbPcieComplex.h
index b51089f7f6..6477892e4e 100644
--- a/src/mainboard/amd/inagua/PlatformGnbPcieComplex.h
+++ b/src/mainboard/amd/inagua/PlatformGnbPcieComplex.h
@@ -29,7 +29,7 @@
#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
- //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+//3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port5
@@ -37,7 +37,7 @@
#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
- //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+//3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port6
@@ -45,7 +45,7 @@
#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
- //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+//3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port7
@@ -53,7 +53,7 @@
#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
- //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+//3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port8
@@ -61,12 +61,9 @@
#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
- //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+//3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
-VOID
-OemCustomizeInitEarly (
- IN OUT AMD_EARLY_PARAMS *InitEarly
- );
+VOID OemCustomizeInitEarly(IN OUT AMD_EARLY_PARAMS *InitEarly);
#endif //_PLATFORM_GNB_PCIE_COMPLEX_H
diff --git a/src/mainboard/amd/inagua/acpi_tables.c b/src/mainboard/amd/inagua/acpi_tables.c
index 8ed7d4f976..8f475912a9 100644
--- a/src/mainboard/amd/inagua/acpi_tables.c
+++ b/src/mainboard/amd/inagua/acpi_tables.c
@@ -86,7 +86,7 @@ unsigned long acpi_fill_madt(unsigned long current)
/* Write SB800 IOAPIC, only one */
current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
- CONFIG_MAX_CPUS, IO_APIC_ADDR, 0);
+ CONFIG_MAX_CPUS, IO_APIC_ADDR, 0);
current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
current, 0, 0, 2, 0);
diff --git a/src/mainboard/amd/inagua/agesawrapper.c b/src/mainboard/amd/inagua/agesawrapper.c
index fe2fe6b0a8..113f962abe 100644
--- a/src/mainboard/amd/inagua/agesawrapper.c
+++ b/src/mainboard/amd/inagua/agesawrapper.c
@@ -78,8 +78,8 @@ VOID *AcpiAlib = NULL;
*/
UINT32
agesawrapper_amdinitcpuio (
- VOID
- )
+ VOID
+ )
{
AGESA_STATUS Status;
UINT64 MsrReg;
@@ -127,8 +127,8 @@ agesawrapper_amdinitcpuio (
UINT32
agesawrapper_amdinitmmio (
- VOID
- )
+ VOID
+ )
{
AGESA_STATUS Status;
UINT64 MsrReg;
@@ -141,9 +141,9 @@ agesawrapper_amdinitmmio (
UINT8 Index;
/*
- Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base
- Address MSR register.
- */
+ Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base
+ Address MSR register.
+ */
for (Index = 0; Index < 8; Index++) {
BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index;
@@ -157,8 +157,8 @@ agesawrapper_amdinitmmio (
LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader);
/*
- Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
- */
+ Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
+ */
LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader);
MsrReg = MsrReg | 0x0000400000000000ull;
LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
@@ -177,22 +177,22 @@ agesawrapper_amdinitmmio (
UINT32
agesawrapper_amdinitreset (
- VOID
- )
+ VOID
+ )
{
AGESA_STATUS status;
AMD_INTERFACE_PARAMS AmdParamStruct;
AMD_RESET_PARAMS AmdResetParams;
LibAmdMemFill (&AmdParamStruct,
- 0,
- sizeof (AMD_INTERFACE_PARAMS),
- &(AmdParamStruct.StdHeader));
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
LibAmdMemFill (&AmdResetParams,
- 0,
- sizeof (AMD_RESET_PARAMS),
- &(AmdResetParams.StdHeader));
+ 0,
+ sizeof (AMD_RESET_PARAMS),
+ &(AmdResetParams.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET;
AmdParamStruct.AllocationMethod = ByHost;
@@ -209,21 +209,21 @@ agesawrapper_amdinitreset (
if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog();
AmdReleaseStruct (&AmdParamStruct);
return (UINT32)status;
- }
+}
UINT32
agesawrapper_amdinitearly (
- VOID
- )
+ VOID
+ )
{
AGESA_STATUS status;
AMD_INTERFACE_PARAMS AmdParamStruct;
AMD_EARLY_PARAMS *AmdEarlyParamsPtr;
LibAmdMemFill (&AmdParamStruct,
- 0,
- sizeof (AMD_INTERFACE_PARAMS),
- &(AmdParamStruct.StdHeader));
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY;
AmdParamStruct.AllocationMethod = PreMemHeap;
@@ -245,8 +245,8 @@ agesawrapper_amdinitearly (
UINT32
agesawrapper_amdinitpost (
- VOID
- )
+ VOID
+ )
{
AGESA_STATUS status;
UINT16 i;
@@ -255,9 +255,9 @@ agesawrapper_amdinitpost (
BIOS_HEAP_MANAGER *BiosManagerPtr;
LibAmdMemFill (&AmdParamStruct,
- 0,
- sizeof (AMD_INTERFACE_PARAMS),
- &(AmdParamStruct.StdHeader));
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_POST;
AmdParamStruct.AllocationMethod = PreMemHeap;
@@ -287,8 +287,8 @@ agesawrapper_amdinitpost (
UINT32
agesawrapper_amdinitenv (
- VOID
- )
+ VOID
+ )
{
AGESA_STATUS status;
AMD_INTERFACE_PARAMS AmdParamStruct;
@@ -296,9 +296,9 @@ agesawrapper_amdinitenv (
UINT32 PciValue;
LibAmdMemFill (&AmdParamStruct,
- 0,
- sizeof (AMD_INTERFACE_PARAMS),
- &(AmdParamStruct.StdHeader));
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV;
AmdParamStruct.AllocationMethod = PostMemDram;
@@ -311,7 +311,7 @@ agesawrapper_amdinitenv (
if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog();
/* Initialize Subordinate Bus Number and Secondary Bus Number
* In platform BIOS this address is allocated by PCI enumeration code
- Modify D1F0x18
+ Modify D1F0x18
*/
PciAddress.Address.Bus = 0;
PciAddress.Address.Device = 1;
@@ -323,8 +323,8 @@ agesawrapper_amdinitenv (
LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
/* Initialize GMM Base Address for Legacy Bridge Mode
- * Modify B1D5F0x18
- */
+ * Modify B1D5F0x18
+ */
PciAddress.Address.Bus = 1;
PciAddress.Address.Device = 5;
PciAddress.Address.Function = 0;
@@ -335,16 +335,16 @@ agesawrapper_amdinitenv (
LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
/* Initialize FB Base Address for Legacy Bridge Mode
- * Modify B1D5F0x10
- */
+ * Modify B1D5F0x10
+ */
PciAddress.Address.Register = 0x10;
LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
PciValue |= 0x80000000;
LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
/* Initialize GMM Base Address for Pcie Mode
- * Modify B0D1F0x18
- */
+ * Modify B0D1F0x18
+ */
PciAddress.Address.Bus = 0;
PciAddress.Address.Device = 1;
PciAddress.Address.Function = 0;
@@ -355,16 +355,16 @@ agesawrapper_amdinitenv (
LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
/* Initialize FB Base Address for Pcie Mode
- * Modify B0D1F0x10
- */
+ * Modify B0D1F0x10
+ */
PciAddress.Address.Register = 0x10;
LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
PciValue |= 0x80000000;
LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
/* Initialize MMIO Base and Limit Address
- * Modify B0D1F0x20
- */
+ * Modify B0D1F0x20
+ */
PciAddress.Address.Bus = 0;
PciAddress.Address.Device = 1;
PciAddress.Address.Function = 0;
@@ -375,8 +375,8 @@ agesawrapper_amdinitenv (
LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
/* Initialize MMIO Prefetchable Memory Limit and Base
- * Modify B0D1F0x24
- */
+ * Modify B0D1F0x24
+ */
PciAddress.Address.Register = 0x24;
LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
PciValue |= 0x8FF18001;
@@ -388,8 +388,8 @@ agesawrapper_amdinitenv (
VOID *
agesawrapper_getlateinitptr (
- int pick
- )
+ int pick
+ )
{
switch (pick) {
case PICK_DMI:
@@ -413,8 +413,8 @@ agesawrapper_getlateinitptr (
UINT32
agesawrapper_amdinitmid (
- VOID
- )
+ VOID
+ )
{
AGESA_STATUS status;
AMD_INTERFACE_PARAMS AmdParamStruct;
@@ -423,9 +423,9 @@ agesawrapper_amdinitmid (
agesawrapper_amdinitcpuio ();
LibAmdMemFill (&AmdParamStruct,
- 0,
- sizeof (AMD_INTERFACE_PARAMS),
- &(AmdParamStruct.StdHeader));
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_MID;
AmdParamStruct.AllocationMethod = PostMemDram;
@@ -445,17 +445,17 @@ agesawrapper_amdinitmid (
UINT32
agesawrapper_amdinitlate (
- VOID
- )
+ VOID
+ )
{
AGESA_STATUS Status;
AMD_INTERFACE_PARAMS AmdParamStruct;
AMD_LATE_PARAMS * AmdLateParamsPtr;
LibAmdMemFill (&AmdParamStruct,
- 0,
- sizeof (AMD_INTERFACE_PARAMS),
- &(AmdParamStruct.StdHeader));
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE;
AmdParamStruct.AllocationMethod = PostMemDram;
@@ -484,10 +484,10 @@ agesawrapper_amdinitlate (
AcpiAlib = AmdLateParamsPtr->AcpiAlib;
printk(BIOS_DEBUG, "In %s, AGESA generated ACPI tables:\n"
- " DmiTable:%p\n AcpiPstate: %p\n AcpiSrat:%p\n AcpiSlit:%p\n"
- " Mce:%p\n Cmc:%p\n Alib:%p\n",
- __func__, DmiTable, AcpiPstate, AcpiSrat, AcpiSlit,
- AcpiWheaMce, AcpiWheaCmc, AcpiAlib);
+ " DmiTable:%p\n AcpiPstate: %p\n AcpiSrat:%p\n AcpiSlit:%p\n"
+ " Mce:%p\n Cmc:%p\n Alib:%p\n",
+ __func__, DmiTable, AcpiPstate, AcpiSrat, AcpiSlit,
+ AcpiWheaMce, AcpiWheaCmc, AcpiAlib);
/* Don't release the structure until coreboot has copied the ACPI tables.
* AmdReleaseStruct (&AmdLateParams);
@@ -498,18 +498,18 @@ agesawrapper_amdinitlate (
UINT32
agesawrapper_amdlaterunaptask (
- UINT32 Func,
- UINT32 Data,
- VOID *ConfigPtr
- )
+ UINT32 Func,
+ UINT32 Data,
+ VOID *ConfigPtr
+ )
{
AGESA_STATUS Status;
AP_EXE_PARAMS ApExeParams;
LibAmdMemFill (&ApExeParams,
- 0,
- sizeof (AP_EXE_PARAMS),
- &(ApExeParams.StdHeader));
+ 0,
+ sizeof (AP_EXE_PARAMS),
+ &(ApExeParams.StdHeader));
ApExeParams.StdHeader.AltImageBasePtr = 0;
ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
@@ -529,16 +529,16 @@ agesawrapper_amdlaterunaptask (
UINT32
agesawrapper_amdreadeventlog (
- VOID
- )
+ VOID
+ )
{
AGESA_STATUS Status;
EVENT_PARAMS AmdEventParams;
LibAmdMemFill (&AmdEventParams,
- 0,
- sizeof (EVENT_PARAMS),
- &(AmdEventParams.StdHeader));
+ 0,
+ sizeof (EVENT_PARAMS),
+ &(AmdEventParams.StdHeader));
AmdEventParams.StdHeader.AltImageBasePtr = 0;
AmdEventParams.StdHeader.CalloutPtr = NULL;
diff --git a/src/mainboard/amd/inagua/agesawrapper.h b/src/mainboard/amd/inagua/agesawrapper.h
index f8d924eb60..3e819b7181 100644
--- a/src/mainboard/amd/inagua/agesawrapper.h
+++ b/src/mainboard/amd/inagua/agesawrapper.h
@@ -39,13 +39,13 @@
#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS
enum {
- PICK_DMI, /* DMI Interface */
- PICK_PSTATE, /* Acpi Pstate SSDT Table */
- PICK_SRAT, /* SRAT Table */
- PICK_SLIT, /* SLIT Table */
- PICK_WHEA_MCE, /* WHEA MCE table */
- PICK_WHEA_CMC, /* WHEA CMV table */
- PICK_ALIB, /* SACPI SSDT table with ALIB implementation */
+ PICK_DMI, /* DMI Interface */
+ PICK_PSTATE, /* Acpi Pstate SSDT Table */
+ PICK_SRAT, /* SRAT Table */
+ PICK_SLIT, /* SLIT Table */
+ PICK_WHEA_MCE, /* WHEA MCE table */
+ PICK_WHEA_CMC, /* WHEA CMV table */
+ PICK_ALIB, /* SACPI SSDT table with ALIB implementation */
};
/*----------------------------------------------------------------------------------------
@@ -54,8 +54,8 @@ enum {
*/
typedef struct {
- UINT32 CalloutName;
- AGESA_STATUS (*CalloutPtr) (UINT32 Func, UINT32 Data, VOID* ConfigPtr);
+ UINT32 CalloutName;
+ AGESA_STATUS (*CalloutPtr) (UINT32 Func, UINT32 Data, VOID* ConfigPtr);
} BIOS_CALLOUT_STRUCT;
/*----------------------------------------------------------------------------------------
diff --git a/src/mainboard/amd/inagua/buildOpts.c b/src/mainboard/amd/inagua/buildOpts.c
index 6506c2e78a..49eb7bfb63 100644
--- a/src/mainboard/amd/inagua/buildOpts.c
+++ b/src/mainboard/amd/inagua/buildOpts.c
@@ -89,12 +89,12 @@
#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE
#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE
#define BLDOPT_REMOVE_ACPI_PSTATES FALSE
- #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE
- #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE
- #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE
- #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE
- #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE
- #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE
+#define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE
+#define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE
+#define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE
+#define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE
+#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE
+#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE
#define BLDOPT_REMOVE_SRAT FALSE
#define BLDOPT_REMOVE_SLIT FALSE
#define BLDOPT_REMOVE_WHEA FALSE
@@ -329,65 +329,65 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] =
* use its default conservative settings.
*/
CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
- //
- // The following macros are supported (use comma to separate macros):
- //
- // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
- // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
- // AGESA will base on this value to disable unused MemClk to save power.
- // Example:
- // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
- // Bit AM3/S1g3 pin name
- // 0 M[B,A]_CLK_H/L[0]
- // 1 M[B,A]_CLK_H/L[1]
- // 2 M[B,A]_CLK_H/L[2]
- // 3 M[B,A]_CLK_H/L[3]
- // 4 M[B,A]_CLK_H/L[4]
- // 5 M[B,A]_CLK_H/L[5]
- // 6 M[B,A]_CLK_H/L[6]
- // 7 M[B,A]_CLK_H/L[7]
- // And platform has the following routing:
- // CS0 M[B,A]_CLK_H/L[4]
- // CS1 M[B,A]_CLK_H/L[2]
- // CS2 M[B,A]_CLK_H/L[3]
- // CS3 M[B,A]_CLK_H/L[5]
- // Then platform can specify the following macro:
- // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
- //
- // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
- // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
- // AGESA will base on this value to tristate unused CKE to save power.
- //
- // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
- // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
- // AGESA will base on this value to tristate unused ODT pins to save power.
- //
- // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
- // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
- // AGESA will base on this value to tristate unused Chip select to save power.
- //
- // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
- // Specifies the number of DIMM slots per channel.
- //
- // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
- // Specifies the number of Chip selects per channel.
- //
- // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
- // Specifies the number of channels per socket.
- //
- // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
- // Specifies DDR bus speed of channel ChannelID on socket SocketID.
- //
- // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
- // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
- //
- // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
- // Byte6Seed, Byte7Seed, ByteEccSeed)
- // Specifies the write leveling seed for a channel of a socket.
- //
- NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
- NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1),
- PSO_END
+ //
+ // The following macros are supported (use comma to separate macros):
+ //
+ // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
+ // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
+ // AGESA will base on this value to disable unused MemClk to save power.
+ // Example:
+ // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
+ // Bit AM3/S1g3 pin name
+ // 0 M[B,A]_CLK_H/L[0]
+ // 1 M[B,A]_CLK_H/L[1]
+ // 2 M[B,A]_CLK_H/L[2]
+ // 3 M[B,A]_CLK_H/L[3]
+ // 4 M[B,A]_CLK_H/L[4]
+ // 5 M[B,A]_CLK_H/L[5]
+ // 6 M[B,A]_CLK_H/L[6]
+ // 7 M[B,A]_CLK_H/L[7]
+ // And platform has the following routing:
+ // CS0 M[B,A]_CLK_H/L[4]
+ // CS1 M[B,A]_CLK_H/L[2]
+ // CS2 M[B,A]_CLK_H/L[3]
+ // CS3 M[B,A]_CLK_H/L[5]
+ // Then platform can specify the following macro:
+ // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
+ //
+ // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
+ // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
+ // AGESA will base on this value to tristate unused CKE to save power.
+ //
+ // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
+ // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
+ // AGESA will base on this value to tristate unused ODT pins to save power.
+ //
+ // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
+ // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
+ // AGESA will base on this value to tristate unused Chip select to save power.
+ //
+ // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
+ // Specifies the number of DIMM slots per channel.
+ //
+ // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
+ // Specifies the number of Chip selects per channel.
+ //
+ // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
+ // Specifies the number of channels per socket.
+ //
+ // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
+ // Specifies DDR bus speed of channel ChannelID on socket SocketID.
+ //
+ // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
+ // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
+ //
+ // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+ // Byte6Seed, Byte7Seed, ByteEccSeed)
+ // Specifies the write leveling seed for a channel of a socket.
+ //
+ NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
+ NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1),
+ PSO_END
};
/*
@@ -399,45 +399,45 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
//DA Customer table
CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] =
{
- // Hardcoded Memory Training Values
-
- // The following macro should be used to override training values for your platform
- //
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
- //
- // NOTE:
- // The following training hardcode values are example values that were taken from a tilapia motherboard
- // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in
- // the table and replace the byte lane values with your own.
- //
- // ------------------ BYTE LANES ----------------------
- // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC
- // Write Data Timing
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
-
- // DQS Receiver Enable
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
-
- // Write DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
-
- // Read DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
- //--------------------------------------------------------------------------------------------------------------------------------------------------
- // TABLE END
- NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table
+ // Hardcoded Memory Training Values
+
+ // The following macro should be used to override training values for your platform
+ //
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
+ //
+ // NOTE:
+ // The following training hardcode values are example values that were taken from a tilapia motherboard
+ // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in
+ // the table and replace the byte lane values with your own.
+ //
+ // ------------------ BYTE LANES ----------------------
+ // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC
+ // Write Data Timing
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
+
+ // DQS Receiver Enable
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
+
+ // Write DQS Delays
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
+
+ // Read DQS Delays
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
+ //--------------------------------------------------------------------------------------------------------------------------------------------------
+ // TABLE END
+ NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table
};
CONST UINT8 SizeOfTableON = sizeof (AGESA_MEM_TABLE_ON) / sizeof (AGESA_MEM_TABLE_ON[0]);
diff --git a/src/mainboard/amd/inagua/devicetree.cb b/src/mainboard/amd/inagua/devicetree.cb
index 60bb29bfbc..100a5cccb5 100644
--- a/src/mainboard/amd/inagua/devicetree.cb
+++ b/src/mainboard/amd/inagua/devicetree.cb
@@ -17,56 +17,56 @@
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
chip northbridge/amd/agesa/family14/root_complex
- device lapic_cluster 0 on
- chip cpu/amd/agesa/family14
- device lapic 0 on end
- end
- end
- device pci_domain 0 on
- subsystemid 0x1022 0x1510 inherit
- chip northbridge/amd/agesa/family14 # CPU side of HT root complex
-# device pci 18.0 on # northbridge
- chip northbridge/amd/agesa/family14 # PCI side of HT root complex
- device pci 0.0 on end # Root Complex
- device pci 1.0 on end # Internal Graphics P2P bridge, 9802 to 9806
- device pci 1.1 on end # Internal Multimedia
- device pci 4.0 on end # PCIE P2P bridge MXM lane 0
- device pci 5.0 off end # PCIE P2P bridge MXM lane 1
- device pci 6.0 on end # PCIE P2P bridge LAN
- device pci 7.0 on end # PCIE P2P bridge MINIPCIE SLOT1
- device pci 8.0 off end # NB/SB Link P2P bridge
- end # agesa northbridge
+ device lapic_cluster 0 on
+ chip cpu/amd/agesa/family14
+ device lapic 0 on end
+ end
+ end
+ device pci_domain 0 on
+ subsystemid 0x1022 0x1510 inherit
+ chip northbridge/amd/agesa/family14 # CPU side of HT root complex
+# device pci 18.0 on # northbridge
+ chip northbridge/amd/agesa/family14 # PCI side of HT root complex
+ device pci 0.0 on end # Root Complex
+ device pci 1.0 on end # Internal Graphics P2P bridge, 9802 to 9806
+ device pci 1.1 on end # Internal Multimedia
+ device pci 4.0 on end # PCIE P2P bridge MXM lane 0
+ device pci 5.0 off end # PCIE P2P bridge MXM lane 1
+ device pci 6.0 on end # PCIE P2P bridge LAN
+ device pci 7.0 on end # PCIE P2P bridge MINIPCIE SLOT1
+ device pci 8.0 off end # NB/SB Link P2P bridge
+ end # agesa northbridge
- chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus
- device pci 11.0 on end # SATA
- device pci 12.0 on end # USB
- device pci 12.1 on end # USB
- device pci 12.2 on end # USB
- device pci 13.0 on end # USB
- device pci 13.1 on end # USB
- device pci 13.2 on end # USB
- device pci 14.0 on # SM
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- end # SM
- device pci 14.1 on end # IDE 0x439c
- device pci 14.2 on end # HDA 0x4383
- device pci 14.3 on # LPC 0x439d
- chip superio/smsc/kbc1100
- device pnp 2e.7 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- end # kbc1100
+ chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus
+ device pci 11.0 on end # SATA
+ device pci 12.0 on end # USB
+ device pci 12.1 on end # USB
+ device pci 12.2 on end # USB
+ device pci 13.0 on end # USB
+ device pci 13.1 on end # USB
+ device pci 13.2 on end # USB
+ device pci 14.0 on # SM
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ end # SM
+ device pci 14.1 on end # IDE 0x439c
+ device pci 14.2 on end # HDA 0x4383
+ device pci 14.3 on # LPC 0x439d
+ chip superio/smsc/kbc1100
+ device pnp 2e.7 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ end # kbc1100
end #LPC
device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
- device pci 14.5 on end # USB 2
+ device pci 14.5 on end # USB 2
device pci 15.0 on end # PCIe PortA Express Card
device pci 15.1 on end # PCIe PortB NEC USB3.0
device pci 15.2 on end # PCIe PortC MINIPCIE SLOT2
@@ -74,20 +74,20 @@ chip northbridge/amd/agesa/family14/root_complex
device pci 16.0 on end # OHCI USB3
device pci 16.2 on end # EHCI USB3
register "gpp_configuration" = "4" #1:1:1:1
- register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
+ register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
end #southbridge/amd/cimx/sb800
-# end # device pci 18.0
+# end # device pci 18.0
# These seem unnecessary
- device pci 18.0 on end
- #device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- device pci 18.4 on end
- device pci 18.5 on end
- device pci 18.6 on end
- device pci 18.7 on end
- end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex
- end #pci_domain
+ device pci 18.0 on end
+ #device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ device pci 18.4 on end
+ device pci 18.5 on end
+ device pci 18.6 on end
+ device pci 18.7 on end
+ end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex
+ end #pci_domain
end #northbridge/amd/agesa/family14/root_complex
diff --git a/src/mainboard/amd/inagua/dimmSpd.c b/src/mainboard/amd/inagua/dimmSpd.c
index 3719112d11..7a8e82a409 100644
--- a/src/mainboard/amd/inagua/dimmSpd.c
+++ b/src/mainboard/amd/inagua/dimmSpd.c
@@ -26,19 +26,19 @@ AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PA
#define DIMENSION(array)(sizeof (array)/ sizeof (array [0]))
/*#pragma optimize ("", off) // for source level debug
-*---------------------------------------------------------------------------
-*
-* SPD address table - porting required
-*/
+ *---------------------------------------------------------------------------
+ *
+ * SPD address table - porting required
+ */
static const UINT8 spdAddressLookup [1] [2] [2] = // socket, channel, dimm
- {
- // socket 0
- {
- {0xA0, 0xA2}, // channel 0 dimms
- {0x00, 0x00}, // channel 1 dimms
- },
- };
+{
+ // socket 0
+ {
+ {0xA0, 0xA2}, // channel 0 dimms
+ {0x00, 0x00}, // channel 1 dimms
+ },
+};
/*-----------------------------------------------------------------------------
*
@@ -47,30 +47,30 @@ static const UINT8 spdAddressLookup [1] [2] [2] = // socket, channel, dimm
static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
{
- unsigned int status;
- UINT64 limit;
+ unsigned int status;
+ UINT64 limit;
- address |= 1; // set read bit
+ address |= 1; // set read bit
- __outbyte (iobase + 0, 0xFF); // clear error status
- __outbyte (iobase + 1, 0x1F); // clear error status
- __outbyte (iobase + 3, offset); // offset in eeprom
- __outbyte (iobase + 4, address); // slave address and read bit
- __outbyte (iobase + 2, 0x48); // read byte command
+ __outbyte (iobase + 0, 0xFF); // clear error status
+ __outbyte (iobase + 1, 0x1F); // clear error status
+ __outbyte (iobase + 3, offset); // offset in eeprom
+ __outbyte (iobase + 4, address); // slave address and read bit
+ __outbyte (iobase + 2, 0x48); // read byte command
- // time limit to avoid hanging for unexpected error status (should never happen)
- limit = __rdtsc () + 2000000000 / 10;
+ // time limit to avoid hanging for unexpected error status (should never happen)
+ limit = __rdtsc () + 2000000000 / 10;
for (;;) {
- status = __inbyte (iobase);
- if (__rdtsc () > limit) break;
- if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
- if ((status & 1) == 1) continue; // HostBusy set, keep waiting
- break;
- }
-
- buffer [0] = __inbyte (iobase + 5);
- if (status == 2) status = 0; // check for done with no errors
- return status;
+ status = __inbyte (iobase);
+ if (__rdtsc () > limit) break;
+ if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
+ if ((status & 1) == 1) continue; // HostBusy set, keep waiting
+ break;
+ }
+
+ buffer [0] = __inbyte (iobase + 5);
+ if (status == 2) status = 0; // check for done with no errors
+ return status;
}
/*-----------------------------------------------------------------------------
@@ -81,25 +81,25 @@ static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
static int readSmbusByte (int iobase, int address, char *buffer)
{
- unsigned int status;
- UINT64 limit;
+ unsigned int status;
+ UINT64 limit;
- __outbyte (iobase + 0, 0xFF); // clear error status
- __outbyte (iobase + 2, 0x44); // read command
+ __outbyte (iobase + 0, 0xFF); // clear error status
+ __outbyte (iobase + 2, 0x44); // read command
- // time limit to avoid hanging for unexpected error status
- limit = __rdtsc () + 2000000000 / 10;
+ // time limit to avoid hanging for unexpected error status
+ limit = __rdtsc () + 2000000000 / 10;
for (;;) {
- status = __inbyte (iobase);
- if (__rdtsc () > limit) break;
- if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
- if ((status & 1) == 1) continue; // HostBusy set, keep waiting
- break;
- }
-
- buffer [0] = __inbyte (iobase + 5);
- if (status == 2) status = 0; // check for done with no errors
- return status;
+ status = __inbyte (iobase);
+ if (__rdtsc () > limit) break;
+ if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
+ if ((status & 1) == 1) continue; // HostBusy set, keep waiting
+ break;
+ }
+
+ buffer [0] = __inbyte (iobase + 5);
+ if (status == 2) status = 0; // check for done with no errors
+ return status;
}
/*---------------------------------------------------------------------------
@@ -113,47 +113,47 @@ static int readSmbusByte (int iobase, int address, char *buffer)
static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
{
- int index, error;
+ int index, error;
- /* read the first byte using offset zero */
- error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
- if (error) return error;
+ /* read the first byte using offset zero */
+ error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
+ if (error) return error;
- /* read the remaining bytes using auto-increment for speed */
+ /* read the remaining bytes using auto-increment for speed */
for (index = 1; index < count; index++) {
- error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]);
- if (error) return error;
- }
+ error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]);
+ if (error) return error;
+ }
- return 0;
+ return 0;
}
static void writePmReg (int reg, int data)
- {
- __outbyte (0xCD6, reg);
- __outbyte (0xCD7, data);
- }
+{
+ __outbyte (0xCD6, reg);
+ __outbyte (0xCD7, data);
+}
static void setupFch (int ioBase)
{
- writePmReg (0x2D, ioBase >> 8);
- writePmReg (0x2C, ioBase | 1);
- writePmReg (0x29, 0x80);
- writePmReg (0x28, 0x61);
- __outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
+ writePmReg (0x2D, ioBase >> 8);
+ writePmReg (0x2C, ioBase | 1);
+ writePmReg (0x29, 0x80);
+ writePmReg (0x28, 0x61);
+ __outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
}
AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info)
{
- int spdAddress, ioBase;
+ int spdAddress, ioBase;
- if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR;
- if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR;
- if (info->DimmId >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR;
+ if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR;
+ if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR;
+ if (info->DimmId >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR;
- spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId];
- if (spdAddress == 0) return AGESA_ERROR;
+ spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId];
+ if (spdAddress == 0) return AGESA_ERROR;
ioBase = SMBUS0_BASE_ADDRESS;
- setupFch (ioBase);
- return readspd (ioBase, spdAddress, (void *) info->Buffer, 128);
+ setupFch (ioBase);
+ return readspd (ioBase, spdAddress, (void *) info->Buffer, 128);
}
diff --git a/src/mainboard/amd/inagua/get_bus_conf.c b/src/mainboard/amd/inagua/get_bus_conf.c
index 13d198ab62..229477d745 100644
--- a/src/mainboard/amd/inagua/get_bus_conf.c
+++ b/src/mainboard/amd/inagua/get_bus_conf.c
@@ -31,19 +31,19 @@
/* Global variables for MB layouts and these will be shared by irqtable mptable
-* and acpi_tables busnum is default.
-*/
+ * and acpi_tables busnum is default.
+ */
u8 bus_isa;
u8 bus_sb800[3];
u32 apicid_sb800;
/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
+ * Here you only need to set value in pci1234 for HT-IO that could be installed or not
+ * You may need to preset pci1234 for HTIO board,
+ * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+ */
u32 pci1234x[] = {
- 0x0000ff0,
+ 0x0000ff0,
};
u32 bus_type[256];
@@ -55,81 +55,81 @@ static u32 get_bus_conf_done = 0;
void get_bus_conf(void)
{
u32 apicid_base;
- u32 status;
-
- device_t dev;
- int i, j;
-
- if (get_bus_conf_done == 1)
- return; /* do it only once */
-
- get_bus_conf_done = 1;
-
-/*
- * This is the call to AmdInitLate. It is really in the wrong place, conceptually,
- * but functionally within the coreboot model, this is the best place to make the
- * call. The logically correct place to call AmdInitLate is after PCI scan is done,
- * after the decision about S3 resume is made, and before the system tables are
- * written into RAM. The routine that is responsible for writing the tables is
- * "write_tables", called near the end of "hardwaremain". There is no platform
- * specific entry point between the S3 resume decision point and the call to
- * "write_tables", and the next platform specific entry points are the calls to
- * the ACPI table write functions. The first of ose would seem to be the right
- * place, but other table write functions, e.g. the PIRQ table write function, are
- * called before the ACPI tables are written. This routine is called at the beginning
- * of each of the write functions called prior to the ACPI write functions, so this
- * becomes the best place for this call.
- */
- status = agesawrapper_amdinitlate();
- if(status) {
- printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
- }
-
- sbdn_sb800 = 0;
-
- for (i = 0; i < 3; i++) {
- bus_sb800[i] = 0;
- }
-
- for (i = 0; i < 256; i++) {
- bus_type[i] = 0; /* default ISA bus. */
- }
-
- bus_type[0] = 1; /* pci */
-
-// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff;
- bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
-
- /* sb800 */
- dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4));
-
- if (dev) {
- bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
-
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
- for (j = bus_sb800[1]; j < bus_isa; j++)
- bus_type[j] = 1;
- }
-
- for (i = 0; i < 4; i++) {
- dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i));
- if (dev) {
- bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
- }
- }
-
- for (j = bus_sb800[2]; j < bus_isa; j++)
- bus_type[j] = 1;
-
- /* I/O APICs: APIC ID Version State Address */
- bus_isa = 10;
+ u32 status;
+
+ device_t dev;
+ int i, j;
+
+ if (get_bus_conf_done == 1)
+ return; /* do it only once */
+
+ get_bus_conf_done = 1;
+
+ /*
+ * This is the call to AmdInitLate. It is really in the wrong place, conceptually,
+ * but functionally within the coreboot model, this is the best place to make the
+ * call. The logically correct place to call AmdInitLate is after PCI scan is done,
+ * after the decision about S3 resume is made, and before the system tables are
+ * written into RAM. The routine that is responsible for writing the tables is
+ * "write_tables", called near the end of "hardwaremain". There is no platform
+ * specific entry point between the S3 resume decision point and the call to
+ * "write_tables", and the next platform specific entry points are the calls to
+ * the ACPI table write functions. The first of ose would seem to be the right
+ * place, but other table write functions, e.g. the PIRQ table write function, are
+ * called before the ACPI tables are written. This routine is called at the beginning
+ * of each of the write functions called prior to the ACPI write functions, so this
+ * becomes the best place for this call.
+ */
+ status = agesawrapper_amdinitlate();
+ if(status) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+ }
+
+ sbdn_sb800 = 0;
+
+ for (i = 0; i < 3; i++) {
+ bus_sb800[i] = 0;
+ }
+
+ for (i = 0; i < 256; i++) {
+ bus_type[i] = 0; /* default ISA bus. */
+ }
+
+ bus_type[0] = 1; /* pci */
+
+ // bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff;
+ bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
+
+ /* sb800 */
+ dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4));
+
+ if (dev) {
+ bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ for (j = bus_sb800[1]; j < bus_isa; j++)
+ bus_type[j] = 1;
+ }
+
+ for (i = 0; i < 4; i++) {
+ dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i));
+ if (dev) {
+ bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ }
+ }
+
+ for (j = bus_sb800[2]; j < bus_isa; j++)
+ bus_type[j] = 1;
+
+ /* I/O APICs: APIC ID Version State Address */
+ bus_isa = 10;
apicid_base = CONFIG_MAX_CPUS;
apicid_sb800 = apicid_base;
#if CONFIG_AMD_SB_CIMX
- sb_Late_Post();
+ sb_Late_Post();
#endif
}
diff --git a/src/mainboard/amd/inagua/irq_tables.c b/src/mainboard/amd/inagua/irq_tables.c
index 28432dd248..de25b48980 100644
--- a/src/mainboard/amd/inagua/irq_tables.c
+++ b/src/mainboard/amd/inagua/irq_tables.c
@@ -27,9 +27,9 @@
static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
- u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
- u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
- u8 slot, u8 rfu)
+ u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+ u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
{
pirq_info->bus = bus;
pirq_info->devfn = devfn;
diff --git a/src/mainboard/amd/inagua/mainboard.c b/src/mainboard/amd/inagua/mainboard.c
index 89a3c6b2be..17c985de0d 100644
--- a/src/mainboard/amd/inagua/mainboard.c
+++ b/src/mainboard/amd/inagua/mainboard.c
@@ -74,8 +74,8 @@ void set_pcie_dereset(void)
uint64_t uma_memory_base, uma_memory_size;
/*************************************************
-* enable the dedicated function in INAGUA board.
-*************************************************/
+ * enable the dedicated function in INAGUA board.
+ *************************************************/
static void inagua_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
@@ -87,14 +87,14 @@ static void inagua_enable(device_t dev)
/* TOP_MEM: the top of DRAM below 4G */
msr = rdmsr(TOP_MEM);
printk
- (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
- __func__, msr.lo, msr.hi);
+ (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+ __func__, msr.lo, msr.hi);
/* TOP_MEM2: the top of DRAM above 4G */
msr2 = rdmsr(TOP_MEM2);
printk
- (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
- __func__, msr2.lo, msr2.hi);
+ (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+ __func__, msr2.lo, msr2.hi);
/* refer to UMA Size Consideration in Family14h BKDG. */
sys_mem = msr.lo + 0x1000000; // Ignore 16MB allocated for C6 when finding UMA size, refer MemNGetUmaSizeON()
@@ -102,16 +102,16 @@ static void inagua_enable(device_t dev)
uma_memory_size = 0x18000000; /* >= 2G memory, 384M recommended UMA */
}
else {
- if (sys_mem >= 0x40000000) {
- uma_memory_size = 0x10000000; /* >= 1G memory, 256M recommended UMA */
+ if (sys_mem >= 0x40000000) {
+ uma_memory_size = 0x10000000; /* >= 1G memory, 256M recommended UMA */
} else {
- uma_memory_size = 0x4000000; /* <1G memory, 64M recommended UMA */
- }
+ uma_memory_size = 0x4000000; /* <1G memory, 64M recommended UMA */
+ }
}
uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */
printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
- __func__, uma_memory_size, uma_memory_base);
+ __func__, uma_memory_size, uma_memory_base);
/* TODO: TOP_MEM2 */
#else
@@ -127,16 +127,16 @@ int add_mainboard_resources(struct lb_memory *mem)
{
/* UMA is removed from system memory in the northbridge code, but
* in some circumstances we want the memory mentioned as reserved.
- */
+ */
#if (CONFIG_GFXUMA == 1)
printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n",
- uma_memory_base, uma_memory_size);
+ uma_memory_base, uma_memory_size);
lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base,
- uma_memory_size);
+ uma_memory_size);
#endif
return 0;
}
struct chip_operations mainboard_ops = {
CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
- .enable_dev = inagua_enable,
+ .enable_dev = inagua_enable,
};
diff --git a/src/mainboard/amd/inagua/mptable.c b/src/mainboard/amd/inagua/mptable.c
index 0a2096bc8b..b3393480ab 100644
--- a/src/mainboard/amd/inagua/mptable.c
+++ b/src/mainboard/amd/inagua/mptable.c
@@ -50,115 +50,115 @@ u8 intr_data[] = {
static void *smp_write_config_table(void *v)
{
- struct mp_config_table *mc;
- int bus_isa;
+ struct mp_config_table *mc;
+ int bus_isa;
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- mptable_init(mc, LAPIC_ADDR);
- memcpy(mc->mpc_oem, "AMD ", 8);
+ mptable_init(mc, LAPIC_ADDR);
+ memcpy(mc->mpc_oem, "AMD ", 8);
smp_write_processors(mc);
- get_bus_conf();
+ get_bus_conf();
mptable_write_buses(mc, NULL, &bus_isa);
- /* I/O APICs: APIC ID Version State Address */
+ /* I/O APICs: APIC ID Version State Address */
- u32 dword;
- u8 byte;
+ u32 dword;
+ u8 byte;
- ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword);
- dword &= 0xFFFFFFF0;
- smp_write_ioapic(mc, apicid_sb800, 0x21, dword);
+ ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword);
+ dword &= 0xFFFFFFF0;
+ smp_write_ioapic(mc, apicid_sb800, 0x21, dword);
- for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
- outb(byte | 0x80, 0xC00);
- outb(intr_data[byte], 0xC01);
- }
+ for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+ outb(byte | 0x80, 0xC00);
+ outb(intr_data[byte], 0xC01);
+ }
- /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
#define IO_LOCAL_INT(type, intr, apicid, pin) \
- smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0);
- /* PCI interrupts are level triggered, and are
- * associated with a specific bus/device/function tuple.
- */
+ /* PCI interrupts are level triggered, and are
+ * associated with a specific bus/device/function tuple.
+ */
#if CONFIG_GENERATE_ACPI_TABLES == 0
#define PCI_INT(bus, dev, fn, pin) \
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin))
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin))
#else
#define PCI_INT(bus, dev, fn, pin)
#endif
- /* APU Internal Graphic Device*/
- PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
- PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
+ /* APU Internal Graphic Device*/
+ PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
+ PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
//PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */
- PCI_INT(0x0, 0x14, 0x0, 0x10);
+ PCI_INT(0x0, 0x14, 0x0, 0x10);
/* Southbridge HD Audio: */
PCI_INT(0x0, 0x14, 0x2, 0x12);
PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */
- PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
- PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
- PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
- PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
- PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
-
- /* sata */
- PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
-
- /* on board NIC & Slot PCIE. */
-
- /* PCI slots */
- /* PCI_SLOT 0. */
- PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14);
- PCI_INT(bus_sb800[1], 0x5, 0x1, 0x15);
- PCI_INT(bus_sb800[1], 0x5, 0x2, 0x16);
- PCI_INT(bus_sb800[1], 0x5, 0x3, 0x17);
-
- /* PCI_SLOT 1. */
- PCI_INT(bus_sb800[1], 0x6, 0x0, 0x15);
- PCI_INT(bus_sb800[1], 0x6, 0x1, 0x16);
- PCI_INT(bus_sb800[1], 0x6, 0x2, 0x17);
- PCI_INT(bus_sb800[1], 0x6, 0x3, 0x14);
-
- /* PCI_SLOT 2. */
- PCI_INT(bus_sb800[1], 0x7, 0x0, 0x16);
- PCI_INT(bus_sb800[1], 0x7, 0x1, 0x17);
- PCI_INT(bus_sb800[1], 0x7, 0x2, 0x14);
- PCI_INT(bus_sb800[1], 0x7, 0x3, 0x15);
-
- PCI_INT(bus_sb800[2], 0x0, 0x0, 0x12);
- PCI_INT(bus_sb800[2], 0x0, 0x1, 0x13);
- PCI_INT(bus_sb800[2], 0x0, 0x2, 0x14);
+ PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
+ PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
+ PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
+ PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
+ PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
+
+ /* sata */
+ PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
+
+ /* on board NIC & Slot PCIE. */
+
+ /* PCI slots */
+ /* PCI_SLOT 0. */
+ PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14);
+ PCI_INT(bus_sb800[1], 0x5, 0x1, 0x15);
+ PCI_INT(bus_sb800[1], 0x5, 0x2, 0x16);
+ PCI_INT(bus_sb800[1], 0x5, 0x3, 0x17);
+
+ /* PCI_SLOT 1. */
+ PCI_INT(bus_sb800[1], 0x6, 0x0, 0x15);
+ PCI_INT(bus_sb800[1], 0x6, 0x1, 0x16);
+ PCI_INT(bus_sb800[1], 0x6, 0x2, 0x17);
+ PCI_INT(bus_sb800[1], 0x6, 0x3, 0x14);
+
+ /* PCI_SLOT 2. */
+ PCI_INT(bus_sb800[1], 0x7, 0x0, 0x16);
+ PCI_INT(bus_sb800[1], 0x7, 0x1, 0x17);
+ PCI_INT(bus_sb800[1], 0x7, 0x2, 0x14);
+ PCI_INT(bus_sb800[1], 0x7, 0x3, 0x15);
+
+ PCI_INT(bus_sb800[2], 0x0, 0x0, 0x12);
+ PCI_INT(bus_sb800[2], 0x0, 0x1, 0x13);
+ PCI_INT(bus_sb800[2], 0x0, 0x2, 0x14);
/* PCIe PortA */
- PCI_INT(0x0, 0x15, 0x0, 0x10);
+ PCI_INT(0x0, 0x15, 0x0, 0x10);
/* PCIe PortB */
- PCI_INT(0x0, 0x15, 0x1, 0x11);
+ PCI_INT(0x0, 0x15, 0x1, 0x11);
/* PCIe PortC */
- PCI_INT(0x0, 0x15, 0x2, 0x12);
+ PCI_INT(0x0, 0x15, 0x2, 0x12);
/* PCIe PortD */
- PCI_INT(0x0, 0x15, 0x3, 0x13);
+ PCI_INT(0x0, 0x15, 0x3, 0x13);
- /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
- /* There is no extension information... */
+ /* There is no extension information... */
- /* Compute the checksums */
- return mptable_finalize(mc);
+ /* Compute the checksums */
+ return mptable_finalize(mc);
}
unsigned long write_smp_table(unsigned long addr)
{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
+ void *v;
+ v = smp_write_floating_table(addr, 0);
+ return (unsigned long)smp_write_config_table(v);
}
diff --git a/src/mainboard/amd/inagua/platform_cfg.h b/src/mainboard/amd/inagua/platform_cfg.h
index 87b2893b9e..2a3342c553 100644
--- a/src/mainboard/amd/inagua/platform_cfg.h
+++ b/src/mainboard/amd/inagua/platform_cfg.h
@@ -38,13 +38,13 @@
*/
#ifndef BIOS_SIZE
#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1
- #define BIOS_SIZE BIOS_SIZE_1M
+#define BIOS_SIZE BIOS_SIZE_1M
#elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1
- #define BIOS_SIZE BIOS_SIZE_2M
+#define BIOS_SIZE BIOS_SIZE_2M
#elif CONFIG_COREBOOT_ROMSIZE_KB_4096 == 1
- #define BIOS_SIZE BIOS_SIZE_4M
+#define BIOS_SIZE BIOS_SIZE_4M
#elif CONFIG_COREBOOT_ROMSIZE_KB_8192 == 1
- #define BIOS_SIZE BIOS_SIZE_8M
+#define BIOS_SIZE BIOS_SIZE_8M
#endif
#endif