summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/kontron/986lcd-m/irq_tables.c20
-rw-r--r--src/mainboard/kontron/986lcd-m/mainboard.c57
-rw-r--r--src/mainboard/kontron/986lcd-m/mptable.c10
-rw-r--r--src/mainboard/kontron/986lcd-m/romstage.c52
-rw-r--r--src/mainboard/kontron/ktqm77/hda_verb.c12
-rw-r--r--src/mainboard/kontron/ktqm77/mainboard.c4
-rw-r--r--src/mainboard/kontron/ktqm77/romstage.c16
7 files changed, 80 insertions, 91 deletions
diff --git a/src/mainboard/kontron/986lcd-m/irq_tables.c b/src/mainboard/kontron/986lcd-m/irq_tables.c
index 0c5f403f46..fc67c22ea7 100644
--- a/src/mainboard/kontron/986lcd-m/irq_tables.c
+++ b/src/mainboard/kontron/986lcd-m/irq_tables.c
@@ -29,22 +29,22 @@ static const struct irq_routing_table intel_irq_routing_table = {
0xf, /* u8 checksum. */
{
/* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x00,(0x01 << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // PCIe?
- {0x00,(0x02 << 3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // VGA
- {0x00,(0x1e << 3)|0x0, {{0x61, 0xdcf8}, {0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // PCI bridge
- {0x00,(0x1f << 3)|0x0, {{0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // LPC
- {0x00,(0x1d << 3)|0x0, {{0x6b, 0xdcf8}, {0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x60, 0x0dcf8}}, 0x0, 0x0}, // USB#1
- {0x00,(0x1b << 3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Audio device
- {0x00,(0x1c << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x2, 0x0}, // PCIe bridge
- {0x04,(0x00 << 3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Firewire
- {0x04,(0x01 << 3)|0x0, {{0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x1, 0x0}, // PCI Bridge
+ {0x00,(0x01 << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, /* PCIe? */
+ {0x00,(0x02 << 3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, /* VGA */
+ {0x00,(0x1e << 3)|0x0, {{0x61, 0xdcf8}, {0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, /* PCI bridge */
+ {0x00,(0x1f << 3)|0x0, {{0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, /* LPC */
+ {0x00,(0x1d << 3)|0x0, {{0x6b, 0xdcf8}, {0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x60, 0x0dcf8}}, 0x0, 0x0}, /* USB#1 */
+ {0x00,(0x1b << 3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, /* Audio device */
+ {0x00,(0x1c << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x2, 0x0}, /* PCIe bridge */
+ {0x04,(0x00 << 3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, /* Firewire */
+ {0x04,(0x01 << 3)|0x0, {{0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x1, 0x0}, /* PCI Bridge */
{0x04,(0x02 << 3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x2, 0x0},
{0x04,(0x03 << 3)|0x0, {{0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0x0dcf8}}, 0x3, 0x0},
{0x04,(0x04 << 3)|0x0, {{0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0x0dcf8}}, 0x4, 0x0},
{0x04,(0x05 << 3)|0x0, {{0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0x0dcf8}}, 0x5, 0x0},
{0x04,(0x06 << 3)|0x0, {{0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0x0dcd8}}, 0x6, 0x0},
{0x04,(0x09 << 3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x9, 0x0},
- {0x01,(0x00 << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // Ethernet 8168
+ {0x01,(0x00 << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, /* Ethernet 8168 */
{0x02,(0x00 << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x9, 0x0},
{0x03,(0x00 << 3)|0x0, {{0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x60, 0x0dcf8}}, 0xa, 0x0},
}
diff --git a/src/mainboard/kontron/986lcd-m/mainboard.c b/src/mainboard/kontron/986lcd-m/mainboard.c
index 2a0c1470e2..d729533792 100644
--- a/src/mainboard/kontron/986lcd-m/mainboard.c
+++ b/src/mainboard/kontron/986lcd-m/mainboard.c
@@ -41,15 +41,15 @@ static void hwm_bank(u8 bank)
#define FAN_CRUISE_CONTROL_THERMAL 2
#define FAN_SPEED_5625 0
-//#define FAN_TEMPERATURE_30DEGC 0
+
struct fan_speed {
u8 fan_in;
u16 fan_speed;
};
-// FANIN Target Speed Register
-// FANIN = 337500 / RPM
+/* FANIN Target Speed Register */
+/* FANIN = 337500 / RPM */
struct fan_speed fan_speeds[] = {
{ 0x3c, 5625 }, { 0x41, 5192 }, { 0x47, 4753 }, { 0x4e, 4326 },
{ 0x56, 3924 }, { 0x5f, 3552 }, { 0x69, 3214 }, { 0x74, 2909 },
@@ -79,34 +79,27 @@ static void hwm_setup(void)
get_option(&cpufan_control, "cpufan_cruise_control");
cpufan_speed = FAN_SPEED_5625;
get_option(&cpufan_speed, "cpufan_speed");
- //cpufan_temperature = FAN_TEMPERATURE_30DEGC;
- //get_option(&cpufan_temperature, "cpufan_temperature");
sysfan_control = FAN_CRUISE_CONTROL_DISABLED;
get_option(&sysfan_control, "sysfan_cruise_control");
sysfan_speed = FAN_SPEED_5625;
get_option(&sysfan_speed, "sysfan_speed");
- //sysfan_temperature = FAN_TEMPERATURE_30DEGC;
- //get_option(&sysfan_temperature, "sysfan_temperature");
-
- // hwm_write(0x31, 0x20); // AVCC high limit
- // hwm_write(0x34, 0x06); // VIN2 low limit
hwm_bank(0);
- hwm_write(0x59, 0x20); // Diode Selection
- hwm_write(0x5d, 0x0f); // All Sensors Diode, not Thermistor
+ hwm_write(0x59, 0x20); /* Diode Selection */
+ hwm_write(0x5d, 0x0f); /* All Sensors Diode, not Thermistor */
hwm_bank(4);
- hwm_write(0x54, 0xf1); // SYSTIN temperature offset
- hwm_write(0x55, 0x19); // CPUTIN temperature offset
- hwm_write(0x56, 0xfc); // AUXTIN temperature offset
+ hwm_write(0x54, 0xf1); /* SYSTIN temperature offset */
+ hwm_write(0x55, 0x19); /* CPUTIN temperature offset */
+ hwm_write(0x56, 0xfc); /* AUXTIN temperature offset */
- hwm_bank(0x80); // Default
+ hwm_bank(0x80); /* Default */
u8 fan_config = 0;
- // 00 FANOUT is Manual Mode
- // 01 FANOUT is Thermal Cruise Mode
- // 10 FANOUT is Fan Speed Cruise Mode
+ /* 00 FANOUT is Manual Mode */
+ /* 01 FANOUT is Thermal Cruise Mode */
+ /* 10 FANOUT is Fan Speed Cruise Mode */
switch (cpufan_control) {
case FAN_CRUISE_CONTROL_SPEED: fan_config |= (2 << 4); break;
case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 4); break;
@@ -115,20 +108,20 @@ static void hwm_setup(void)
case FAN_CRUISE_CONTROL_SPEED: fan_config |= (2 << 2); break;
case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 2); break;
}
- // This register must be written first
+ /* This register must be written first */
hwm_write(0x04, fan_config);
switch (cpufan_control) {
case FAN_CRUISE_CONTROL_SPEED:
printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to %d RPM\n",
fan_speeds[cpufan_speed].fan_speed);
- hwm_write(0x06, fan_speeds[cpufan_speed].fan_in); // CPUFANIN target speed
+ hwm_write(0x06, fan_speeds[cpufan_speed].fan_in); /* CPUFANIN target speed */
break;
case FAN_CRUISE_CONTROL_THERMAL:
printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to activation at %d deg C/%d deg F\n",
temperatures[cpufan_temperature].deg_celsius,
temperatures[cpufan_temperature].deg_fahrenheit);
- hwm_write(0x06, temperatures[cpufan_temperature].deg_celsius); // CPUFANIN target temperature
+ hwm_write(0x06, temperatures[cpufan_temperature].deg_celsius); /* CPUFANIN target temperature */
break;
}
@@ -136,29 +129,27 @@ static void hwm_setup(void)
case FAN_CRUISE_CONTROL_SPEED:
printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to %d RPM\n",
fan_speeds[sysfan_speed].fan_speed);
- hwm_write(0x05, fan_speeds[sysfan_speed].fan_in); // SYSFANIN target speed
+ hwm_write(0x05, fan_speeds[sysfan_speed].fan_in); /* SYSFANIN target speed */
break;
case FAN_CRUISE_CONTROL_THERMAL:
printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to activation at %d deg C/%d deg F\n",
temperatures[sysfan_temperature].deg_celsius,
temperatures[sysfan_temperature].deg_fahrenheit);
- hwm_write(0x05, temperatures[sysfan_temperature].deg_celsius); // SYSFANIN target temperature
+ hwm_write(0x05, temperatures[sysfan_temperature].deg_celsius); /* SYSFANIN target temperature */
break;
}
- hwm_write(0x0e, 0x02); // Fan Output Step Down Time
- hwm_write(0x0f, 0x02); // Fan Output Step Up Time
+ hwm_write(0x0e, 0x02); /* Fan Output Step Down Time */
+ hwm_write(0x0f, 0x02); /* Fan Output Step Up Time */
- hwm_write(0x47, 0xaf); // FAN divisor register
- hwm_write(0x4b, 0x84); // AUXFANIN speed divisor
+ hwm_write(0x47, 0xaf); /* FAN divisor register */
+ hwm_write(0x4b, 0x84); /* AUXFANIN speed divisor */
- hwm_write(0x40, 0x01); // Init, but no SMI#
+ hwm_write(0x40, 0x01); /* Init, but no SMI# */
}
-
-
-// mainboard_enable is executed as first thing after
-// enumerate_buses().
+/* mainboard_enable is executed as first thing after */
+/* enumerate_buses(). */
static void mainboard_enable(device_t dev)
{
diff --git a/src/mainboard/kontron/986lcd-m/mptable.c b/src/mainboard/kontron/986lcd-m/mptable.c
index 2ee28906d3..7db977d136 100644
--- a/src/mainboard/kontron/986lcd-m/mptable.c
+++ b/src/mainboard/kontron/986lcd-m/mptable.c
@@ -39,8 +39,8 @@ static void *smp_write_config_table(void *v)
firewire_bus = firewire->bus->secondary;
}
- // If a riser card is used, this riser is detected on bus 4, so its secondary bus is the
- // highest bus number on the pci bus.
+ /* If a riser card is used, this riser is detected on bus 4, so its secondary bus is the */
+ /* highest bus number on the pci bus. */
riser = dev_find_device(0x3388, 0x0021, 0);
if (!riser)
riser = dev_find_device(0x3388, 0x0022, 0);
@@ -77,11 +77,11 @@ static void *smp_write_config_table(void *v)
if (riser) {
/* Old riser card */
- // riser slot top 5:8.0
+ /* riser slot top 5:8.0 */
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x20, ioapic_id, 0x14);
- // riser slot middle 5:9.0
+ /* riser slot middle 5:9.0 */
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x24, ioapic_id, 0x15);
- // riser slot bottom 5:a.0
+ /* riser slot bottom 5:a.0 */
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x28, ioapic_id, 0x16);
/* New Riser Card */
diff --git a/src/mainboard/kontron/986lcd-m/romstage.c b/src/mainboard/kontron/986lcd-m/romstage.c
index e9143a84e3..e3063b2ce0 100644
--- a/src/mainboard/kontron/986lcd-m/romstage.c
+++ b/src/mainboard/kontron/986lcd-m/romstage.c
@@ -13,7 +13,7 @@
* GNU General Public License for more details.
*/
-// __PRE_RAM__ means: use "unsigned" for device, not a struct.
+/* __PRE_RAM__ means: use "unsigned" for device, not a struct. */
#include <stdint.h>
#include <string.h>
@@ -57,21 +57,21 @@ static void ich7_enable_lpc(void)
{
int lpt_en = 0;
if (read_option(lpt, 0) != 0) {
- lpt_en = 1 << 2; // enable LPT
+ lpt_en = 1 << 2; /* enable LPT */
}
- // Enable Serial IRQ
+ /* Enable Serial IRQ */
pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0);
- // Set COM1/COM2 decode range
+ /* Set COM1/COM2 decode range */
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010);
- // Enable COM1/COM2/KBD/SuperIO1+2
+ /* Enable COM1/COM2/KBD/SuperIO1+2 */
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x340b | lpt_en);
- // Enable HWM at 0xa00
+ /* Enable HWM at 0xa00 */
pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x00fc0a01);
- // COM3 decode
+ /* COM3 decode */
pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x000403e9);
- // COM4 decode
+ /* COM4 decode */
pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x000402e9);
- // io 0x300 decode
+ /* io 0x300 decode */
pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x90, 0x00000301);
}
@@ -101,10 +101,10 @@ static void early_superio_config_w83627thg(void)
dev = PNP_DEV(0x2e, W83627THG_SP1);
pnp_enter_func_mode(dev);
- pnp_write_config(dev, 0x24, 0xc6); // PNPCSV
+ pnp_write_config(dev, 0x24, 0xc6); /* PNPCSV */
- pnp_write_config(dev, 0x29, 0x43); // GPIO settings
- pnp_write_config(dev, 0x2a, 0x40); // GPIO settings
+ pnp_write_config(dev, 0x29, 0x43); /* GPIO settings */
+ pnp_write_config(dev, 0x2a, 0x40); /* GPIO settings */
dev = PNP_DEV(0x2e, W83627THG_SP1);
pnp_set_logical_device(dev);
@@ -118,7 +118,6 @@ static void early_superio_config_w83627thg(void)
pnp_set_enable(dev, 0);
pnp_set_iobase(dev, PNP_IDX_IO0, 0x2f8);
pnp_set_irq(dev, PNP_IDX_IRQ0, 3);
- // pnp_write_config(dev, 0xf1, 4); // IRMODE0
pnp_set_enable(dev, 1);
dev = PNP_DEV(0x2e, W83627THG_KBC);
@@ -126,25 +125,24 @@ static void early_superio_config_w83627thg(void)
pnp_set_enable(dev, 0);
pnp_set_iobase(dev, PNP_IDX_IO0, 0x60);
pnp_set_iobase(dev, PNP_IDX_IO1, 0x64);
- // pnp_write_config(dev, 0xf0, 0x82);
pnp_set_enable(dev, 1);
dev = PNP_DEV(0x2e, W83627THG_GAME_MIDI_GPIO1);
pnp_set_logical_device(dev);
pnp_set_enable(dev, 0);
- pnp_write_config(dev, 0xf5, 0xff); // invert all GPIOs
+ pnp_write_config(dev, 0xf5, 0xff); /* invert all GPIOs */
pnp_set_enable(dev, 1);
dev = PNP_DEV(0x2e, W83627THG_GPIO2);
pnp_set_logical_device(dev);
- pnp_set_enable(dev, 1); // Just enable it
+ pnp_set_enable(dev, 1); /* Just enable it */
dev = PNP_DEV(0x2e, W83627THG_GPIO3);
pnp_set_logical_device(dev);
pnp_set_enable(dev, 0);
- pnp_write_config(dev, 0xf0, 0xfb); // GPIO bit 2 is output
- pnp_write_config(dev, 0xf1, 0x00); // GPIO bit 2 is 0
- pnp_write_config(dev, 0x30, 0x03); // Enable GPIO3+4. pnp_set_enable is not sufficient
+ pnp_write_config(dev, 0xf0, 0xfb); /* GPIO bit 2 is output */
+ pnp_write_config(dev, 0xf1, 0x00); /* GPIO bit 2 is 0 */
+ pnp_write_config(dev, 0x30, 0x03); /* Enable GPIO3+4. pnp_set_enable is not sufficient */
dev = PNP_DEV(0x2e, W83627THG_FDC);
pnp_set_logical_device(dev);
@@ -166,14 +164,14 @@ static void early_superio_config_w83627thg(void)
dev = PNP_DEV(0x4e, W83627THG_SP1);
pnp_enter_func_mode(dev);
- pnp_set_logical_device(dev); // Set COM3 to sane non-conflicting values
+ pnp_set_logical_device(dev); /* Set COM3 to sane non-conflicting values */
pnp_set_enable(dev, 0);
pnp_set_iobase(dev, PNP_IDX_IO0, 0x3e8);
pnp_set_irq(dev, PNP_IDX_IRQ0, 11);
pnp_set_enable(dev, 1);
dev = PNP_DEV(0x4e, W83627THG_SP2);
- pnp_set_logical_device(dev); // Set COM4 to sane non-conflicting values
+ pnp_set_logical_device(dev); /* Set COM4 to sane non-conflicting values */
pnp_set_enable(dev, 0);
pnp_set_iobase(dev, PNP_IDX_IO0, 0x2e8);
pnp_set_irq(dev, PNP_IDX_IRQ0, 10);
@@ -201,8 +199,6 @@ static void rcba_config(void)
u32 reg32;
/* Set up virtual channel 0 */
- //RCBA32(0x0014) = 0x80000001;
- //RCBA32(0x001c) = 0x03128010;
/* Device 1f interrupt pin register */
RCBA32(0x3100) = 0x00042210;
@@ -267,7 +263,7 @@ static void rcba_config(void)
RCBA32(0x3418) = reg32;
/* Enable PCIe Root Port Clock Gate */
- // RCBA32(0x341c) = 0x00000001;
+
}
static void early_ich7_init(void)
@@ -275,15 +271,15 @@ static void early_ich7_init(void)
uint8_t reg8;
uint32_t reg32;
- // program secondary mlt XXX byte?
+ /* program secondary mlt XXX byte? */
pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20);
- // reset rtc power status
+ /* reset rtc power status */
reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4);
reg8 &= ~(1 << 2);
pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8);
- // usb transient disconnect
+ /* usb transient disconnect */
reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad);
reg8 |= (3 << 0);
pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8);
@@ -317,7 +313,7 @@ static void early_ich7_init(void)
RCBA32(0x3e0e) |= (1 << 7);
RCBA32(0x3e4e) |= (1 << 7);
- // next step only on ich7m b0 and later:
+ /* next step only on ich7m b0 and later: */
reg32 = RCBA32(0x2034);
reg32 &= ~(0x0f << 16);
reg32 |= (5 << 16);
diff --git a/src/mainboard/kontron/ktqm77/hda_verb.c b/src/mainboard/kontron/ktqm77/hda_verb.c
index 720b5a96c4..fdbc977e68 100644
--- a/src/mainboard/kontron/ktqm77/hda_verb.c
+++ b/src/mainboard/kontron/ktqm77/hda_verb.c
@@ -18,9 +18,9 @@
const u32 cim_verb_data[] = {
/* coreboot specific header */
- 0x11060397, // Codec Vendor / Device ID: Via VT1708S
- 0x11060000, // Subsystem ID
- 0x0000000c, // Number of jacks
+ 0x11060397, /* Codec Vendor / Device ID: Via VT1708S */
+ 0x11060000, /* Subsystem ID */
+ 0x0000000c, /* Number of jacks */
/* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x11060000 */
AZALIA_SUBVENDOR(0x0, 0x11060000),
@@ -95,9 +95,9 @@ const u32 cim_verb_data[] = {
/* coreboot specific header */
- 0x80862806, // Codec Vendor / Device ID: Intel PantherPoint HDMI
- 0x80860101, // Subsystem ID
- 0x00000004, // Number of jacks
+ 0x80862806, /* Codec Vendor / Device ID: Intel PantherPoint HDMI */
+ 0x80860101, /* Subsystem ID */
+ 0x00000004, /* Number of jacks */
/* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */
AZALIA_SUBVENDOR(0x0, 0x80860101),
diff --git a/src/mainboard/kontron/ktqm77/mainboard.c b/src/mainboard/kontron/ktqm77/mainboard.c
index d2d7acf1f8..b82102aae8 100644
--- a/src/mainboard/kontron/ktqm77/mainboard.c
+++ b/src/mainboard/kontron/ktqm77/mainboard.c
@@ -159,8 +159,8 @@ static int int15_handler(void)
-// mainboard_enable is executed as first thing after
-// enumerate_buses().
+/* mainboard_enable is executed as first thing after */
+/* enumerate_buses(). */
static void mainboard_enable(device_t dev)
{
diff --git a/src/mainboard/kontron/ktqm77/romstage.c b/src/mainboard/kontron/ktqm77/romstage.c
index 57a7fa2e59..a078b7de86 100644
--- a/src/mainboard/kontron/ktqm77/romstage.c
+++ b/src/mainboard/kontron/ktqm77/romstage.c
@@ -78,8 +78,8 @@ static void pnp_exit_ext_func_mode(device_t dev)
void mainboard_config_superio(void)
{
- int lvds_3v = 0; // 0 (5V) or 1 (3V3)
- int dis_bl_inv = 1; // backlight inversion: 1 = disabled, 0 = enabled
+ int lvds_3v = 0; /* 0 (5V) or 1 (3V3) */
+ int dis_bl_inv = 1; /* backlight inversion: 1 = disabled, 0 = enabled */
device_t dev = PNP_DEV(0x2e, 0x9);
pnp_enter_ext_func_mode(dev);
pnp_write_config(dev, 0x29, 0x02); /* Pins 119, 120 are GPIO21, 20 */
@@ -114,17 +114,19 @@ void mainboard_fill_pei_data(struct pei_data *pei_data)
.pmbase = DEFAULT_PMBASE,
.gpiobase = DEFAULT_GPIOBASE,
.thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
+ .system_type = 0, /* 0 Mobile, 1 Desktop/Server */
.tseg_size = CONFIG_SMM_TSEG_SIZE,
.spd_addresses = { 0xA0, 0x00,0xA4,0x00 },
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
.ec_present = 1,
.gbe_enable = 1,
.ddr3lv_support = 0,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
+ /*
+ * 0 = leave channel enabled
+ * 1 = disable dimm 0 on channel
+ * 2 = disable dimm 1 on channel
+ * 3 = disable dimm 0+1 on channel
+ */
.dimm_channel0_disabled = 2,
.dimm_channel1_disabled = 2,
.max_ddr3_freq = 1600,