summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/superio/ite/it8772f/superio.c61
1 files changed, 26 insertions, 35 deletions
diff --git a/src/superio/ite/it8772f/superio.c b/src/superio/ite/it8772f/superio.c
index ed46e73559..4d9ea7134f 100644
--- a/src/superio/ite/it8772f/superio.c
+++ b/src/superio/ite/it8772f/superio.c
@@ -22,21 +22,12 @@
#include <delay.h>
#include <stdlib.h>
#include <superio/conf_mode.h>
+#include <superio/hwm5_conf.h>
#include "chip.h" /* FIXME */
#include "it8772f.h"
-static inline u8 it8772f_envc_read(struct resource *res, u8 addr)
-{
- outb(addr, res->base + 5);
- return inb(res->base + 6);
-}
-
-static inline void it8772f_envc_write(struct resource *res, u8 addr, u8 value)
-{
- outb(addr, res->base + 5);
- outb(value, res->base + 6);
-}
+/* FIXME: see if the common ITE environment controller code can be used here */
static void it8772f_extemp_force_idle_status(struct resource *res)
{
@@ -45,7 +36,7 @@ static void it8772f_extemp_force_idle_status(struct resource *res)
/* Wait up to 10ms for non-busy state. */
while (retries > 0) {
- reg = it8772f_envc_read(res, IT8772F_EXTEMP_STATUS);
+ reg = pnp_read_hwm5_index(res->base, IT8772F_EXTEMP_STATUS);
if ((reg & IT8772F_EXTEMP_STATUS_HOST_BUSY) == 0x0)
break;
@@ -60,7 +51,7 @@ static void it8772f_extemp_force_idle_status(struct resource *res)
* SIO is busy due to unfinished peci transaction.
* Re-configure Register 0x8E to terminate processes.
*/
- it8772f_envc_write(res, IT8772F_EXTEMP_CONTROL,
+ pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_CONTROL,
IT8772F_EXTEMP_CONTROL_AUTO_4HZ |
IT8772F_EXTEMP_CONTROL_AUTO_START);
}
@@ -75,25 +66,25 @@ static void it8772f_enable_peci(struct resource *res, int tmpin)
return;
/* Enable PECI interface */
- it8772f_envc_write(res, IT8772F_INTERFACE_SELECT,
+ pnp_write_hwm5_index(res->base, IT8772F_INTERFACE_SELECT,
IT8772F_INTERFACE_SEL_PECI |
IT8772F_INTERFACE_SPEED_TOLERANCE);
/* Setup External Temperature using PECI GetTemp */
- it8772f_envc_write(res, IT8772F_EXTEMP_ADDRESS,
+ pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_ADDRESS,
PECI_CLIENT_ADDRESS);
- it8772f_envc_write(res, IT8772F_EXTEMP_COMMAND,
+ pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_COMMAND,
PECI_GETTEMP_COMMAND);
- it8772f_envc_write(res, IT8772F_EXTEMP_WRITE_LENGTH,
+ pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_WRITE_LENGTH,
PECI_GETTEMP_WRITE_LENGTH);
- it8772f_envc_write(res, IT8772F_EXTEMP_READ_LENGTH,
+ pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_READ_LENGTH,
PECI_GETTEMP_READ_LENGTH);
- it8772f_envc_write(res, IT8772F_EXTEMP_CONTROL,
+ pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_CONTROL,
IT8772F_EXTEMP_CONTROL_AUTO_4HZ |
IT8772F_EXTEMP_CONTROL_AUTO_START);
/* External Temperature reported in TMPINx register */
- it8772f_envc_write(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
+ pnp_write_hwm5_index(res->base, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
(tmpin & 3) << 6);
}
@@ -109,17 +100,17 @@ static void it8772f_enable_tmpin(struct resource *res, int tmpin,
if (tmpin != 1 && tmpin != 2)
return;
- reg = it8772f_envc_read(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE);
+ reg = pnp_read_hwm5_index(res->base, IT8772F_ADC_TEMP_CHANNEL_ENABLE);
switch (mode) {
case THERMAL_DIODE:
/* Thermal Diode Mode */
- it8772f_envc_write(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
+ pnp_write_hwm5_index(res->base, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
reg | tmpin);
break;
case THERMAL_RESISTOR:
/* Thermal Resistor Mode */
- it8772f_envc_write(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
+ pnp_write_hwm5_index(res->base, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
reg | (tmpin << 3));
break;
default:
@@ -128,10 +119,10 @@ static void it8772f_enable_tmpin(struct resource *res, int tmpin,
return;
}
- reg = it8772f_envc_read(res, IT8772F_CONFIGURATION);
+ reg = pnp_read_hwm5_index(res->base, IT8772F_CONFIGURATION);
/* Enable the startup of monitoring operation */
- it8772f_envc_write(res, IT8772F_CONFIGURATION, reg | 0x01);
+ pnp_write_hwm5_index(res->base, IT8772F_CONFIGURATION, reg | 0x01);
}
/*
@@ -145,41 +136,41 @@ static void it8772f_enable_fan(struct resource *res, int fan, u8 fan_speed)
return;
/* Enable 6MHz (23.43kHz PWM) active high output */
- reg = it8772f_envc_read(res, IT8772F_FAN_CTL_MODE);
+ reg = pnp_read_hwm5_index(res->base, IT8772F_FAN_CTL_MODE);
reg |= IT8772F_FAN_CTL_ON(fan) |
IT8772F_FAN_PWM_CLOCK_6MHZ |
IT8772F_FAN_CTL_POLARITY_HIGH;
- it8772f_envc_write(res, IT8772F_FAN_CTL_MODE, reg);
+ pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL_MODE, reg);
/* Enable output in smart mode */
- reg = it8772f_envc_read(res, IT8772F_FAN_MAIN_CTL);
+ reg = pnp_read_hwm5_index(res->base, IT8772F_FAN_MAIN_CTL);
reg |= IT8772F_FAN_MAIN_CTL_TAC_SMART(fan);
reg |= IT8772F_FAN_MAIN_CTL_TAC_EN(fan);
- it8772f_envc_write(res, IT8772F_FAN_MAIN_CTL, reg);
+ pnp_write_hwm5_index(res->base, IT8772F_FAN_MAIN_CTL, reg);
switch (fan) {
case 2:
/* Enable software operation */
- it8772f_envc_write(res, IT8772F_FAN_CTL2_PWM_MODE,
+ pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL2_PWM_MODE,
IT8772F_FAN_CTL_PWM_MODE_SOFTWARE);
/* Disable Smoothing */
- it8772f_envc_write(res, IT8772F_FAN_CTL2_AUTO_MODE,
+ pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL2_AUTO_MODE,
IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS);
/* Set a default fan speed */
if (fan_speed)
- it8772f_envc_write(res, IT8772F_FAN_CTL2_PWM_START,
+ pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL2_PWM_START,
fan_speed);
break;
case 3:
/* Enable software operation */
- it8772f_envc_write(res, IT8772F_FAN_CTL3_PWM_MODE,
+ pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL3_PWM_MODE,
IT8772F_FAN_CTL_PWM_MODE_SOFTWARE);
/* Disable Smoothing */
- it8772f_envc_write(res, IT8772F_FAN_CTL3_AUTO_MODE,
+ pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL3_AUTO_MODE,
IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS);
/* Set a default fan speed */
if (fan_speed)
- it8772f_envc_write(res, IT8772F_FAN_CTL3_PWM_START,
+ pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL3_PWM_START,
fan_speed);
break;
}