summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/mainboard/hp/folio_9480m.md156
-rw-r--r--Documentation/mainboard/hp/folio_9480m_flash.webpbin0 -> 40170 bytes
-rw-r--r--Documentation/mainboard/index.md1
-rw-r--r--src/mainboard/hp/folio_9480m/Kconfig50
-rw-r--r--src/mainboard/hp/folio_9480m/Kconfig.name2
-rw-r--r--src/mainboard/hp/folio_9480m/Makefile.inc2
-rw-r--r--src/mainboard/hp/folio_9480m/acpi/ec.asl3
-rw-r--r--src/mainboard/hp/folio_9480m/acpi/platform.asl14
-rw-r--r--src/mainboard/hp/folio_9480m/acpi/superio.asl3
-rw-r--r--src/mainboard/hp/folio_9480m/acpi_tables.c14
-rw-r--r--src/mainboard/hp/folio_9480m/board_info.txt7
-rw-r--r--src/mainboard/hp/folio_9480m/data.vbtbin0 -> 4608 bytes
-rw-r--r--src/mainboard/hp/folio_9480m/devicetree.cb88
-rw-r--r--src/mainboard/hp/folio_9480m/dsdt.asl27
-rw-r--r--src/mainboard/hp/folio_9480m/gma-mainboard.ads18
-rw-r--r--src/mainboard/hp/folio_9480m/gpio.c108
-rw-r--r--src/mainboard/hp/folio_9480m/hda_verb.c72
-rw-r--r--src/mainboard/hp/folio_9480m/romstage.c47
18 files changed, 612 insertions, 0 deletions
diff --git a/Documentation/mainboard/hp/folio_9480m.md b/Documentation/mainboard/hp/folio_9480m.md
new file mode 100644
index 0000000000..20eed08a66
--- /dev/null
+++ b/Documentation/mainboard/hp/folio_9480m.md
@@ -0,0 +1,156 @@
+# HP EliteBook Folio 9480m
+
+This page is about the notebook [HP EliteBook Folio 9480m].
+
+## Release status
+
+HP EliteBook Folio 9480m was released in 2014 and is now end of life.
+It can be bought from a secondhand market like Taobao or eBay.
+
+## Required proprietary blobs
+
+The following blobs are required to operate the hardware:
+
+1. EC firmware
+2. Intel ME firmware
+3. mrc.bin
+
+HP EliteBook Folio 9480m uses SMSC MEC1322 as its embedded controller.
+The EC firmware is stored in the flash chip, but we don't need to touch it
+or use it in the coreboot build process.
+
+Intel ME firmware is in the flash chip. It is not needed when building coreboot.
+
+The Haswell memory reference code binary is needed when building coreboot.
+Please see [mrc.bin](../../northbridge/intel/haswell/mrc.bin).
+
+## Programming
+
+Before flashing, remove the battery and the hard drive cover according to the
+[Maintenance and Service Guide] of this laptop.
+
+![Two flash chips of HP EliteBook Folio 9480m](folio_9480m_flash.webp)
+
+HP EliteBook Folio 9480m has two flash chips, a 16MiB system flash, and a 2MiB
+private flash. To install coreboot, we need to program both flash chips.
+Read [HP Sure Start] for detailed information.
+
+To access the system flash, we need to connect the AC adapter to the machine,
+then clip on the flash chip with an SOIC-8 clip. An [STM32-based flash programmer]
+made with an STM32 development board is tested to work.
+
+To access the private flash chip, we can use a ch341a based flash programmer and
+flash the chip with the AC adapter disconnected.
+
+Before flashing coreboot, we need to do the following:
+
+1. Erase the private flash to disable the IFD protection
+2. Modify the IFD to shrink the BIOS region, so that we'll not use or override
+ the protected bootblock and PEI region, as well as the EC firmware
+
+To erase the private flash chip, attach it with the flash programmer via the SOIC-8 clip,
+then run:
+
+ flashrom -p <programmer> --erase
+
+To modify the IFD, we need a new flash layout. The flash layout of the OEM firmware is:
+
+ 00000000:00000fff fd
+ 00001000:00002fff gbe
+ 00003000:005fffff me
+ 00600000:00ffffff bios
+
+The default coreboot configuration sets the flash chip size to 12MiB, so set the end of the
+BIOS region to 0xbfffff in the new layout. The modified IFD is as follows (Platform Data
+region pd is the region protected by HP Sure Start):
+
+ 00000000:00000fff fd
+ 00001000:00002fff gbe
+ 00003000:005fffff me
+ 00600000:00bfffff bios
+ 00eb5000:00ffffff pd
+
+Write the above layout in a file, and use ifdtool to modify the IFD of a flash image.
+Suppose the above layout file is ``layout.txt`` and the origin content of the system flash
+is in ``factory-sys.rom``, run:
+
+ ifdtool -n layout.txt factory-sys.rom
+
+Then a flash image with a new IFD will be in ``factory-sys.rom.new``.
+
+Flash the IFD of the system flash:
+
+ flashrom -p <programmer> --ifd -i fd -w factory-sys.rom.new
+
+Then flash the coreboot image:
+
+ # first extend the 12M coreboot.rom to 16M
+ fallocate -l 16M build/coreboot.rom
+ flashrom -p <programmer> --ifd -i bios -w build/coreboot.rom
+
+After coreboot is installed, the coreboot firmware can be updated with internal flashing:
+
+ flashrom -p internal --ifd -i bios --noverify-all -w build/coreboot.rom
+
+## Debugging
+
+The board can be debugged with EHCI debug. The EHCI debug port is the USB port on the left.
+
+## Test status
+
+### Known issues
+
+- GRUB payload freezes just like previous EliteBook laptops
+- Sometimes the PCIe WLAN module can not be found in the OS after booting to the system
+- Sometimes all the USB devices can not be found in the OS after S3 resume
+
+### Untested
+
+- Fingerprint reader
+- Smart Card reader
+
+### Working
+
+- i5-4310U CPU with 4G+4G memory
+- SATA and M.2 SATA disk
+- Ethernet
+- WLAN
+- WWAN
+- SD card reader
+- USB
+- Keyboard and touchpad
+- DisplayPort
+- VGA
+- Dock
+- Audio output from speaker and headphone jack
+- Webcam
+- TPM
+- EC ACPI
+- S3 resume
+- Arch Linux with Linux 5.8.9
+- Memory initialization with mrc.bin version 1.6.1 Build 2
+- Graphics initialization with libgfxinit
+- Payload: SeaBIOS, Tianocore
+- EC firmware
+ - KBC Revision 92.15 from OEM firmware version 01.33
+ - KBC Revision 92.17 from OEM firmware version 01.50
+- Internal flashing under coreboot
+
+## Technology
+
+```eval_rst
++------------------+-----------------------------+
+| CPU | Intel Haswell-ULT |
++------------------+-----------------------------+
+| PCH | Intel Lynx Point Low Power |
++------------------+-----------------------------+
+| EC | SMSC MEC1322 |
++------------------+-----------------------------+
+| Coprocessor | Intel Management Engine |
++------------------+-----------------------------+
+```
+
+[HP EliteBook Folio 9480m]: https://support.hp.com/us-en/product/hp-elitebook-folio-9480m-notebook-pc/7089926
+[Maintenance and Service Guide]: http://h10032.www1.hp.com/ctg/Manual/c05228980
+[STM32-based flash programmer]: https://github.com/dword1511/stm32-vserprog
+[HP Sure Start]: hp_sure_start.md
diff --git a/Documentation/mainboard/hp/folio_9480m_flash.webp b/Documentation/mainboard/hp/folio_9480m_flash.webp
new file mode 100644
index 0000000000..1abc306517
--- /dev/null
+++ b/Documentation/mainboard/hp/folio_9480m_flash.webp
Binary files differ
diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md
index 60fb89949a..4a1f74bc42 100644
--- a/Documentation/mainboard/index.md
+++ b/Documentation/mainboard/index.md
@@ -64,6 +64,7 @@ The boards in this section are not real mainboards, but emulators.
- [HP Sure Start](hp/hp_sure_start.md)
- [EliteBook 2560p](hp/2560p.md)
- [EliteBook 8760w](hp/8760w.md)
+- [EliteBook Folio 9480m](hp/folio_9480m.md)
## Intel
diff --git a/src/mainboard/hp/folio_9480m/Kconfig b/src/mainboard/hp/folio_9480m/Kconfig
new file mode 100644
index 0000000000..545a67bae9
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/Kconfig
@@ -0,0 +1,50 @@
+if BOARD_HP_FOLIO_9480M
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+ # The board has a 16MB flash, but the end of the flash needs
+ # to be reserved, so we use 12MB as default
+ select BOARD_ROMSIZE_KB_12288
+ select EC_HP_KBC1126
+ select HAVE_ACPI_RESUME
+ select HAVE_ACPI_TABLES
+ select INTEL_GMA_HAVE_VBT
+ select INTEL_LYNXPOINT_LP
+ select MAINBOARD_HAS_LIBGFXINIT
+ select MAINBOARD_HAS_LPC_TPM
+ select MAINBOARD_HAS_TPM1
+ select MAINBOARD_USES_IFD_GBE_REGION
+ select NORTHBRIDGE_INTEL_HASWELL
+ select SERIRQ_CONTINUOUS_MODE
+ select SOUTHBRIDGE_INTEL_LYNXPOINT
+ select SYSTEM_TYPE_LAPTOP
+
+config MAINBOARD_DIR
+ string
+ default "hp/folio_9480m"
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "HP EliteBook Folio 9480m"
+
+config VGA_BIOS_FILE
+ string
+ default "pci8086,0a16.rom"
+
+config VGA_BIOS_ID
+ string
+ default "8086,0a16"
+
+config USBDEBUG_HCD_INDEX
+ int
+ default 1
+
+config EC_HP_KBC1126_ECFW_IN_CBFS
+ bool
+ default n
+
+config EC_HP_KBC1126_GPE
+ hex
+ default 0x6
+
+endif
diff --git a/src/mainboard/hp/folio_9480m/Kconfig.name b/src/mainboard/hp/folio_9480m/Kconfig.name
new file mode 100644
index 0000000000..67c671d4c2
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_HP_FOLIO_9480M
+ bool "EliteBook Folio 9480m"
diff --git a/src/mainboard/hp/folio_9480m/Makefile.inc b/src/mainboard/hp/folio_9480m/Makefile.inc
new file mode 100644
index 0000000000..ebe01aea99
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/Makefile.inc
@@ -0,0 +1,2 @@
+romstage-y += gpio.c
+ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
diff --git a/src/mainboard/hp/folio_9480m/acpi/ec.asl b/src/mainboard/hp/folio_9480m/acpi/ec.asl
new file mode 100644
index 0000000000..baa17a4181
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/acpi/ec.asl
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <ec/hp/kbc1126/acpi/ec.asl>
diff --git a/src/mainboard/hp/folio_9480m/acpi/platform.asl b/src/mainboard/hp/folio_9480m/acpi/platform.asl
new file mode 100644
index 0000000000..8023ae826c
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/acpi/platform.asl
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+Method(_WAK,1)
+{
+ \_SB.PCI0.LPCB.EC0.ACPI = 1
+ \_SB.PCI0.LPCB.EC0.SLPT = 0
+
+ Return(Package(){0,0})
+}
+
+Method(_PTS,1)
+{
+ \_SB.PCI0.LPCB.EC0.SLPT = Arg0
+}
diff --git a/src/mainboard/hp/folio_9480m/acpi/superio.asl b/src/mainboard/hp/folio_9480m/acpi/superio.asl
new file mode 100644
index 0000000000..55b1db5b11
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/acpi/superio.asl
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <drivers/pc80/pc/ps2_controller.asl>
diff --git a/src/mainboard/hp/folio_9480m/acpi_tables.c b/src/mainboard/hp/folio_9480m/acpi_tables.c
new file mode 100644
index 0000000000..00963e10b0
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/acpi_tables.c
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <acpi/acpi_gnvs.h>
+#include <southbridge/intel/lynxpoint/nvs.h>
+
+void acpi_create_gnvs(struct global_nvs *gnvs)
+{
+ gnvs->lids = 1;
+
+ /* Temperature at which OS will shutdown */
+ gnvs->tcrt = 100;
+ /* Temperature at which OS will throttle CPU */
+ gnvs->tpsv = 90;
+}
diff --git a/src/mainboard/hp/folio_9480m/board_info.txt b/src/mainboard/hp/folio_9480m/board_info.txt
new file mode 100644
index 0000000000..fdd0d60142
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/board_info.txt
@@ -0,0 +1,7 @@
+Category: laptop
+Board URL: https://support.hp.com/us-en/product/hp-elitebook-folio-9480m-notebook-pc/7089926
+ROM protocol: SPI
+ROM package: SOIC-8
+ROM socketed: n
+Flashrom support: y
+Release year: 2014
diff --git a/src/mainboard/hp/folio_9480m/data.vbt b/src/mainboard/hp/folio_9480m/data.vbt
new file mode 100644
index 0000000000..1a62a07a93
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/data.vbt
Binary files differ
diff --git a/src/mainboard/hp/folio_9480m/devicetree.cb b/src/mainboard/hp/folio_9480m/devicetree.cb
new file mode 100644
index 0000000000..bd81d38197
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/devicetree.cb
@@ -0,0 +1,88 @@
+chip northbridge/intel/haswell
+ register "dq_pins_interleaved" = "true"
+ register "ec_present" = "true"
+ register "gfx" = "GMA_STATIC_DISPLAYS(0)"
+ register "gpu_dp_b_hotplug" = "4"
+ register "gpu_dp_c_hotplug" = "4"
+ register "gpu_panel_power_backlight_off_delay" = "1"
+ register "gpu_panel_power_backlight_on_delay" = "1"
+ register "gpu_panel_power_cycle_delay" = "6"
+ register "gpu_panel_power_down_delay" = "500"
+ register "gpu_panel_power_up_delay" = "2000"
+ register "gpu_pch_backlight_pwm_hz" = "200"
+ register "usb_xhci_on_resume" = "true"
+ device cpu_cluster 0 on
+ chip cpu/intel/haswell
+ register "c1_battery" = "2"
+ register "c2_battery" = "3"
+ register "c3_battery" = "9"
+
+ register "c1_acpower" = "2"
+ register "c2_acpower" = "3"
+ register "c3_acpower" = "9"
+
+ device lapic 0 on end
+ device lapic 0xacac off end
+ end
+ end
+ device domain 0x0 on
+ subsystemid 0x103c 0x22da inherit
+ device pci 00.0 on end # Host bridge
+ device pci 02.0 on end # Internal graphics VGA controller
+ device pci 03.0 on end # Mini-HD audio
+
+ chip southbridge/intel/lynxpoint # Intel Series 8 Lynx Point PCH
+ register "gen1_dec" = "0x007c0201"
+ register "gen2_dec" = "0x000c0101"
+ register "gen4_dec" = "0x000402e9"
+ register "xhci_default" = "1"
+ register "sata_ahci" = "1"
+ register "sata_port1_gen3_dtle" = "0x6"
+ # SATA(1), M.2(3)
+ register "sata_port_map" = "0xa"
+ device pci 13.0 off end # Intel Smart Sound DSP
+ device pci 14.0 on end # xHCI Controller
+ device pci 15.0 off end # Serial I/O DMA
+ device pci 15.1 off end # I2C0
+ device pci 15.2 off end # I2C1
+ device pci 15.3 off end # GSPI0
+ device pci 15.4 off end # GSPI1
+ device pci 15.5 off end # UART0
+ device pci 15.6 off end # UART1
+ device pci 16.0 on end # Management Engine Interface 1
+ device pci 16.1 off end # Management Engine Interface 2
+ device pci 16.2 off end # Management Engine IDE-R
+ device pci 16.3 off end # Management Engine KT
+ device pci 17.0 off end # SDIO
+ device pci 19.0 on end # Intel Gigabit Ethernet
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 on end # PCIe Port #1
+ device pci 1c.1 on end # PCIe Port #2, Realtek Card Reader
+ device pci 1c.2 off end # PCIe Port #3
+ device pci 1c.3 on # PCIe Port #4, WLAN
+ smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther"
+ "M.2 2230" "SlotDataBusWidth1X"
+ end
+ device pci 1c.4 off end # PCIe Port #5
+ device pci 1c.5 off end # PCIe Port #6
+ device pci 1d.0 on end # USB2 EHCI #1
+ device pci 1f.0 on # LPC bridge
+ chip drivers/pc80/tpm
+ device pnp 0c31.0 on end
+ end
+ # This laptop uses MEC1322, but it has the same interface
+ # as the KBC1126 laptops
+ chip ec/hp/kbc1126
+ register "ec_data_port" = "0x62"
+ register "ec_cmd_port" = "0x66"
+ register "ec_ctrl_reg" = "0x81"
+ register "ec_fan_ctrl_value" = "0x6b"
+ device pnp ff.1 off end
+ end
+ end
+ device pci 1f.2 on end # SATA Controller (AHCI)
+ device pci 1f.3 on end # SMBus
+ device pci 1f.6 off end # Thermal
+ end
+ end
+end
diff --git a/src/mainboard/hp/folio_9480m/dsdt.asl b/src/mainboard/hp/folio_9480m/dsdt.asl
new file mode 100644
index 0000000000..f030e72471
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/dsdt.asl
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <acpi/acpi.h>
+
+DefinitionBlock(
+ "dsdt.aml",
+ "DSDT",
+ ACPI_DSDT_REV_2,
+ OEM_ID,
+ ACPI_TABLE_CREATOR,
+ 0x20141018 /* OEM revision */
+)
+{
+ #include "acpi/platform.asl"
+ #include <cpu/intel/common/acpi/cpu.asl>
+ #include <southbridge/intel/common/acpi/platform.asl>
+ /* global NVS and variables. */
+ #include <southbridge/intel/lynxpoint/acpi/globalnvs.asl>
+ #include <southbridge/intel/common/acpi/sleepstates.asl>
+
+ Device (\_SB.PCI0)
+ {
+ #include <northbridge/intel/haswell/acpi/haswell.asl>
+ #include <drivers/intel/gma/acpi/default_brightness_levels.asl>
+ #include <southbridge/intel/lynxpoint/acpi/pch.asl>
+ }
+}
diff --git a/src/mainboard/hp/folio_9480m/gma-mainboard.ads b/src/mainboard/hp/folio_9480m/gma-mainboard.ads
new file mode 100644
index 0000000000..85e9ded77b
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/gma-mainboard.ads
@@ -0,0 +1,18 @@
+-- SPDX-License-Identifier: GPL-2.0-or-later
+
+with HW.GFX.GMA;
+with HW.GFX.GMA.Display_Probing;
+
+use HW.GFX.GMA;
+use HW.GFX.GMA.Display_Probing;
+
+private package GMA.Mainboard is
+
+ ports : constant Port_List :=
+ (DP1, -- DP1/HDMI1: DisplayPorts on board and dock
+ HDMI1,
+ DP2, -- DP2: VGA ports on board and dock
+ eDP,
+ others => Disabled);
+
+end GMA.Mainboard;
diff --git a/src/mainboard/hp/folio_9480m/gpio.c b/src/mainboard/hp/folio_9480m/gpio.c
new file mode 100644
index 0000000000..cb32f4f733
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/gpio.c
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <southbridge/intel/lynxpoint/lp_gpio.h>
+
+const struct pch_lp_gpio_map mainboard_gpio_map[] = {
+ [0] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL },
+ [1] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL },
+ [2] = LP_GPIO_OUT_LOW,
+ [3] = LP_GPIO_OUT_HIGH,
+ [4] = LP_GPIO_OUT_HIGH,
+ [5] = LP_GPIO_OUT_HIGH,
+ [6] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL },
+ [7] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL },
+ [8] = LP_GPIO_OUT_HIGH,
+ [9] = LP_GPIO_OUT_HIGH,
+ [10] = LP_GPIO_OUT_HIGH,
+ [11] = LP_GPIO_OUT_HIGH,
+ [12] = LP_GPIO_NATIVE,
+ [13] = LP_GPIO_OUT_HIGH,
+ [14] = LP_GPIO_OUT_HIGH,
+ [15] = LP_GPIO_OUT_HIGH,
+ [16] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL,
+ .route = GPIO_ROUTE_SMI },
+ [17] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL },
+ [18] = LP_GPIO_OUT_HIGH,
+ [19] = LP_GPIO_NATIVE,
+ [20] = LP_GPIO_NATIVE,
+ [21] = LP_GPIO_NATIVE,
+ [22] = LP_GPIO_OUT_HIGH,
+ [23] = LP_GPIO_OUT_HIGH,
+ [24] = LP_GPIO_OUT_HIGH,
+ [25] = LP_GPIO_OUT_HIGH,
+ [26] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL },
+ [27] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL },
+ [28] = LP_GPIO_OUT_HIGH,
+ [29] = LP_GPIO_OUT_HIGH,
+ [30] = LP_GPIO_NATIVE,
+ [31] = LP_GPIO_NATIVE,
+ [32] = LP_GPIO_NATIVE,
+ [33] = LP_GPIO_NATIVE,
+ [34] = LP_GPIO_OUT_HIGH,
+ [35] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL },
+ [36] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL,
+ .route = GPIO_ROUTE_SMI },
+ [37] = LP_GPIO_NATIVE,
+ [38] = LP_GPIO_NATIVE,
+ [39] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL,
+ .route = GPIO_ROUTE_SMI },
+ [40] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL,
+ .route = GPIO_ROUTE_SMI },
+ [41] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL },
+ [42] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL },
+ [43] = LP_GPIO_OUT_HIGH,
+ [44] = LP_GPIO_OUT_LOW,
+ [45] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL },
+ [46] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL },
+ [47] = LP_GPIO_OUT_HIGH,
+ [48] = LP_GPIO_OUT_LOW,
+ [49] = LP_GPIO_OUT_HIGH,
+ [50] = LP_GPIO_OUT_HIGH,
+ [51] = LP_GPIO_OUT_HIGH,
+ [52] = LP_GPIO_OUT_HIGH,
+ [53] = LP_GPIO_OUT_HIGH,
+ [54] = LP_GPIO_OUT_LOW,
+ [55] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL,
+ .pirq = GPIO_PIRQ_APIC_ROUTE },
+ [56] = LP_GPIO_OUT_HIGH,
+ [57] = LP_GPIO_OUT_LOW,
+ [58] = LP_GPIO_OUT_HIGH,
+ [59] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL },
+ [60] = LP_GPIO_OUT_HIGH,
+ [61] = LP_GPIO_OUT_LOW,
+ [62] = LP_GPIO_NATIVE,
+ [63] = LP_GPIO_NATIVE,
+ [64] = LP_GPIO_OUT_HIGH,
+ [65] = LP_GPIO_OUT_LOW,
+ [66] = LP_GPIO_OUT_HIGH,
+ [67] = LP_GPIO_OUT_HIGH,
+ [68] = LP_GPIO_OUT_HIGH,
+ [69] = LP_GPIO_OUT_HIGH,
+ [70] = LP_GPIO_OUT_LOW,
+ [71] = LP_GPIO_NATIVE,
+ [72] = LP_GPIO_NATIVE,
+ [73] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL },
+ [74] = LP_GPIO_NATIVE,
+ [75] = LP_GPIO_NATIVE,
+ [76] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL },
+ [77] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL },
+ [78] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL,
+ .route = GPIO_ROUTE_SMI },
+ [79] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL },
+ [80] = LP_GPIO_OUT_LOW,
+ [81] = LP_GPIO_NATIVE,
+ [82] = LP_GPIO_OUT_HIGH,
+ [83] = LP_GPIO_OUT_HIGH,
+ [84] = LP_GPIO_OUT_HIGH,
+ [85] = LP_GPIO_OUT_HIGH,
+ [86] = LP_GPIO_OUT_HIGH,
+ [87] = LP_GPIO_OUT_HIGH,
+ [88] = LP_GPIO_OUT_HIGH,
+ [89] = LP_GPIO_OUT_HIGH,
+ [90] = LP_GPIO_OUT_HIGH,
+ [91] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL },
+ [92] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL },
+ [93] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL },
+ [94] = LP_GPIO_OUT_HIGH,
+ LP_GPIO_END
+};
diff --git a/src/mainboard/hp/folio_9480m/hda_verb.c b/src/mainboard/hp/folio_9480m/hda_verb.c
new file mode 100644
index 0000000000..9ee6de01a8
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/hda_verb.c
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+ 0x10ec0280, /* Codec Vendor / Device ID: Realtek */
+ 0x103c22db, /* Subsystem ID */
+ 57, /* Number of 4 dword sets */
+ AZALIA_SUBVENDOR(0, 0x103c22db),
+ AZALIA_RESET(1),
+ AZALIA_PIN_CFG(0, 0x12, 0x90a60130),
+ AZALIA_PIN_CFG(0, 0x13, 0x40000000),
+ AZALIA_PIN_CFG(0, 0x14, 0x90170110),
+ AZALIA_PIN_CFG(0, 0x15, 0x0321101f),
+ AZALIA_PIN_CFG(0, 0x16, 0x411111f0),
+ AZALIA_PIN_CFG(0, 0x17, 0x411111f0),
+ AZALIA_PIN_CFG(0, 0x18, 0x411111f0),
+ AZALIA_PIN_CFG(0, 0x19, 0x411111f0),
+ AZALIA_PIN_CFG(0, 0x1a, 0x03a11020),
+ AZALIA_PIN_CFG(0, 0x1b, 0x411111f0),
+ AZALIA_PIN_CFG(0, 0x1d, 0x40738105),
+ AZALIA_PIN_CFG(0, 0x1e, 0x411111f0),
+
+ /* The following is from the OEM firmware */
+ 0x02050007, 0x0204c200, 0x02050063, 0x02044800,
+ 0x02050066, 0x02040809, 0x02050015, 0x02048842,
+ 0x0205000f, 0x0204cccc, 0x02050010, 0x0204ccdd,
+ 0x02050065, 0x02042000, 0x0205001c, 0x0204c900,
+ 0x02050018, 0x02043788, 0x02050008, 0x02048210,
+ 0x02050068, 0x02043022, 0x02050006, 0x02040800,
+ 0x02050061, 0x02040403, 0x02050061, 0x02040403,
+ 0x0205005f, 0x02040800, 0x02050060, 0x02040800,
+ 0x0205002c, 0x02044002, 0x0205002e, 0x02041ec4,
+ 0x0205002f, 0x02040000, 0x02050033, 0x0204c5e8,
+ 0x02050034, 0x02041a98, 0x02050035, 0x0204f5ad,
+ 0x02050036, 0x0204cbd2, 0x02050037, 0x02041605,
+ 0x02050038, 0x0204f5ad, 0x02050039, 0x0204ea5f,
+ 0x0205003a, 0x02040b42, 0x0205003b, 0x0204fb54,
+ 0x0205003c, 0x0204fcd9, 0x0205003d, 0x02040000,
+ 0x02050030, 0x02041f5c, 0x02050031, 0x02040111,
+ 0x02050032, 0x02041f5f, 0x0205003e, 0x02041ea9,
+ 0x0205002f, 0x02040000, 0x02050042, 0x0204c66e,
+ 0x02050043, 0x02041a29, 0x02050035, 0x0204f5ad,
+ 0x02050044, 0x0204ccdd, 0x02050045, 0x02041549,
+ 0x02050038, 0x0204f5ad, 0x02050046, 0x0204ee79,
+ 0x02050047, 0x020409f4, 0x0205003b, 0x0204fb54,
+ 0x02050048, 0x0204fa4c, 0x0205003d, 0x02040000,
+ 0x0205003f, 0x02041f4d, 0x02050040, 0x02040129,
+ 0x02050041, 0x02041f51, 0x02050049, 0x02041f61,
+ 0x0205002f, 0x02040000, 0x0205004d, 0x0204c2f4,
+ 0x0205004e, 0x02041d2e, 0x02050035, 0x0204f5ad,
+ 0x0205004f, 0x0204c5e8, 0x02050050, 0x02041a98,
+ 0x02050038, 0x0204f5ad, 0x02050051, 0x0204d30e,
+ 0x02050052, 0x020413e6, 0x0205003b, 0x0204fb54,
+ 0x02050053, 0x02040b73, 0x0205003d, 0x02040000,
+ 0x0205004a, 0x02041faf, 0x0205004b, 0x0204008a,
+ 0x0205004c, 0x02041fb0, 0x02050054, 0x02041fb0,
+ 0x0205002f, 0x02040000, 0x02050058, 0x0204c17a,
+ 0x02050059, 0x02041e8f, 0x02050035, 0x0204f5ad,
+ 0x0205005a, 0x0204c2f4, 0x0205005b, 0x02041d2e,
+ 0x02050038, 0x0204f5ad, 0x0205005c, 0x0204c899,
+ 0x0205005d, 0x0204195b, 0x0205003b, 0x0204fb54,
+ 0x0205005e, 0x02041444, 0x0205003d, 0x02040000,
+ 0x02050055, 0x02041fd8, 0x02050056, 0x02040045,
+ 0x02050057, 0x02041fd8, 0x0205002c, 0x0204ffc2,
+ 0x02050026, 0x02042828, 0x02050029, 0x02040250,
+ 0x02050004, 0x0204c09e, 0x0205000e, 0x02045001,
+};
+
+const u32 pc_beep_verbs[0] = {};
+
+AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/hp/folio_9480m/romstage.c b/src/mainboard/hp/folio_9480m/romstage.c
new file mode 100644
index 0000000000..7eeb7bd747
--- /dev/null
+++ b/src/mainboard/hp/folio_9480m/romstage.c
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <stdint.h>
+#include <northbridge/intel/haswell/haswell.h>
+#include <northbridge/intel/haswell/raminit.h>
+#include <southbridge/intel/lynxpoint/pch.h>
+
+void mainboard_config_rcba(void)
+{
+ RCBA16(D31IR) = DIR_ROUTE(PIRQF, PIRQD, PIRQC, PIRQA);
+ RCBA16(D29IR) = DIR_ROUTE(PIRQB, PIRQD, PIRQA, PIRQC);
+ RCBA16(D28IR) = DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA);
+ RCBA16(D27IR) = DIR_ROUTE(PIRQG, PIRQB, PIRQC, PIRQD);
+ RCBA16(D26IR) = DIR_ROUTE(PIRQA, PIRQF, PIRQC, PIRQD);
+ RCBA16(D25IR) = DIR_ROUTE(PIRQE, PIRQB, PIRQC, PIRQD);
+ RCBA16(D22IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
+ RCBA16(D20IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
+}
+
+void mb_get_spd_map(uint8_t spd_map[4])
+{
+ spd_map[0] = 0xa0;
+ spd_map[2] = 0xa4;
+}
+
+void mainboard_fill_pei_data(struct pei_data *pei_data)
+{
+ struct usb2_port_setting usb2_ports[MAX_USB2_PORTS] = {
+ /* Length, Enable, OCn#, Location */
+ { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* dock */
+ { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* left, EHCI debug */
+ { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* right */
+ { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_MINI_PCIE }, /* WLAN */
+ { 0x0110, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* SmartCard */
+ { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_MINI_PCIE }, /* WWAN */
+ { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* Webcam */
+ { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL },
+ };
+ struct usb3_port_setting usb3_ports[MAX_USB3_PORTS] = {
+ { 1, USB_OC_PIN_SKIP }, /* dock */
+ { 1, USB_OC_PIN_SKIP }, /* left */
+ { 1, USB_OC_PIN_SKIP }, /* right */
+ { 0, USB_OC_PIN_SKIP },
+ };
+ memcpy(pei_data->usb2_ports, usb2_ports, sizeof(usb2_ports));
+ memcpy(pei_data->usb3_ports, usb3_ports, sizeof(usb3_ports));
+}