diff options
131 files changed, 325 insertions, 324 deletions
diff --git a/documentation/LinuxBIOS-AMD64.tex b/documentation/LinuxBIOS-AMD64.tex index 6fce3cfe67..43d53d388c 100644 --- a/documentation/LinuxBIOS-AMD64.tex +++ b/documentation/LinuxBIOS-AMD64.tex @@ -446,9 +446,9 @@ Export CMOS option table. Default is \texttt{0}. Set to \texttt{1} if your mainboard has CMOS memory and you want to use it to store LinuxBIOS parameters (Loglevel, serial line speed, ...) -\item \begin{verbatim}CONFIG_ROM_STREAM\end{verbatim} +\item \begin{verbatim}CONFIG_ROM_PAYLOAD\end{verbatim} -Boot image is located in ROM (as opposed to \texttt{CONFIG\_IDE\_STREAM}, which +Boot image is located in ROM (as opposed to \texttt{CONFIG\_IDE\_PAYLOAD}, which will boot from an IDE disk) \item \begin{verbatim}HAVE_FALLBACK_BOOT\end{verbatim} diff --git a/documentation/RFC/config.tex b/documentation/RFC/config.tex index b238f2fa21..acd97ad064 100644 --- a/documentation/RFC/config.tex +++ b/documentation/RFC/config.tex @@ -262,7 +262,7 @@ option SMBUS_MEM_DEVICE_INC=1 ### The linuxBIOS bootloader. ### option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) -option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +option CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) # \end{verbatim} diff --git a/src/arch/i386/lib/failover.lds b/src/arch/i386/lib/failover.lds index ed8460e50c..94c3e097fb 100644 --- a/src/arch/i386/lib/failover.lds +++ b/src/arch/i386/lib/failover.lds @@ -1 +1 @@ - __normal_image = (CONFIG_ROM_STREAM_START & 0xfffffff0) - 8; + __normal_image = (CONFIG_ROM_PAYLOAD_START & 0xfffffff0) - 8; diff --git a/src/arch/i386/lib/failover_failover.lds b/src/arch/i386/lib/failover_failover.lds index e042aa8cef..814f2000fb 100644 --- a/src/arch/i386/lib/failover_failover.lds +++ b/src/arch/i386/lib/failover_failover.lds @@ -1,2 +1,2 @@ - __fallback_image = (CONFIG_ROM_STREAM_START & 0xfffffff0) - 8; - __normal_image = ((CONFIG_ROM_STREAM_START - FALLBACK_SIZE) & 0xfffffff0) - 8; + __fallback_image = (CONFIG_ROM_PAYLOAD_START & 0xfffffff0) - 8; + __normal_image = ((CONFIG_ROM_PAYLOAD_START - FALLBACK_SIZE) & 0xfffffff0) - 8; diff --git a/src/boot/Config.lb b/src/boot/Config.lb index 9e38661824..f6b82a3610 100644 --- a/src/boot/Config.lb +++ b/src/boot/Config.lb @@ -1,5 +1,5 @@ object elfboot.o object hardwaremain.o -if CONFIG_FS_STREAM +if CONFIG_FS_PAYLOAD object filo.o end diff --git a/src/boot/hardwaremain.c b/src/boot/hardwaremain.c index 00bc559771..eb971246c2 100644 --- a/src/boot/hardwaremain.c +++ b/src/boot/hardwaremain.c @@ -88,7 +88,7 @@ void hardwaremain(int boot_complete) */ lb_mem = write_tables(); -#if CONFIG_FS_STREAM == 1 +#if CONFIG_FS_PAYLOAD == 1 filo(lb_mem); #else elfboot(lb_mem); diff --git a/src/config/Options.lb b/src/config/Options.lb index 069125139b..0b3c3acf71 100644 --- a/src/config/Options.lb +++ b/src/config/Options.lb @@ -593,17 +593,17 @@ end # Boot options ############################################### -define CONFIG_IDE_STREAM +define CONFIG_IDE_PAYLOAD default 0 export always comment "Boot from IDE device" end -define CONFIG_ROM_STREAM +define CONFIG_ROM_PAYLOAD default 0 export always comment "Boot image is located in ROM" end -define CONFIG_ROM_STREAM_START +define CONFIG_ROM_PAYLOAD_START default {0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1} format "0x%x" export always @@ -624,12 +624,12 @@ define CONFIG_PRECOMPRESSED_PAYLOAD export always comment "boot image is already compressed" end -define CONFIG_SERIAL_STREAM +define CONFIG_SERIAL_PAYLOAD default 0 export always comment "Download boot image from serial port" end -define CONFIG_FS_STREAM +define CONFIG_FS_PAYLOAD default 0 export always comment "Boot from a filesystem" diff --git a/src/mainboard/agami/aruma/Config.lb b/src/mainboard/agami/aruma/Config.lb index 483fd25d3e..0e6cb00274 100644 --- a/src/mainboard/agami/aruma/Config.lb +++ b/src/mainboard/agami/aruma/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/agami/aruma/Options.lb b/src/mainboard/agami/aruma/Options.lb index 8fdb3ea166..43f8791c82 100644 --- a/src/mainboard/agami/aruma/Options.lb +++ b/src/mainboard/agami/aruma/Options.lb @@ -18,8 +18,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -185,7 +185,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/amd/quartet/Config.lb b/src/mainboard/amd/quartet/Config.lb index 67cdff39d6..9233460965 100644 --- a/src/mainboard/amd/quartet/Config.lb +++ b/src/mainboard/amd/quartet/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/amd/quartet/Options.lb b/src/mainboard/amd/quartet/Options.lb index be344189f7..78b3dfbd00 100644 --- a/src/mainboard/amd/quartet/Options.lb +++ b/src/mainboard/amd/quartet/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -145,7 +145,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/amd/rumba/Config.lb b/src/mainboard/amd/rumba/Config.lb index d99f74793f..2f28d1ae0a 100644 --- a/src/mainboard/amd/rumba/Config.lb +++ b/src/mainboard/amd/rumba/Config.lb @@ -14,13 +14,13 @@ end ## Compute the start location and size size of ## The linuxBIOS bootloader. ## -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/amd/rumba/Options.lb b/src/mainboard/amd/rumba/Options.lb index 10ceae2aa6..79ef88b22d 100644 --- a/src/mainboard/amd/rumba/Options.lb +++ b/src/mainboard/amd/rumba/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -20,7 +20,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -106,7 +106,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/amd/serenade/Config.lb b/src/mainboard/amd/serenade/Config.lb index 57fb981c93..c1f233d7a0 100644 --- a/src/mainboard/amd/serenade/Config.lb +++ b/src/mainboard/amd/serenade/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/amd/serenade/Options.lb b/src/mainboard/amd/serenade/Options.lb index 010b202a60..20e2615d2e 100644 --- a/src/mainboard/amd/serenade/Options.lb +++ b/src/mainboard/amd/serenade/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -144,7 +144,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/amd/serengeti_cheetah/Config.lb b/src/mainboard/amd/serengeti_cheetah/Config.lb index fc42afc09c..16af08c78e 100644 --- a/src/mainboard/amd/serengeti_cheetah/Config.lb +++ b/src/mainboard/amd/serengeti_cheetah/Config.lb @@ -20,12 +20,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/amd/serengeti_cheetah/Options.lb b/src/mainboard/amd/serengeti_cheetah/Options.lb index eda1ec5cdf..1906b41d46 100644 --- a/src/mainboard/amd/serengeti_cheetah/Options.lb +++ b/src/mainboard/amd/serengeti_cheetah/Options.lb @@ -21,8 +21,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -265,7 +265,7 @@ default _RAMBASE=0x00100000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/amd/serengeti_leopard/Config.lb b/src/mainboard/amd/serengeti_leopard/Config.lb index 1ad9b6d900..3820885275 100644 --- a/src/mainboard/amd/serengeti_leopard/Config.lb +++ b/src/mainboard/amd/serengeti_leopard/Config.lb @@ -20,12 +20,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/amd/serengeti_leopard/Options.lb b/src/mainboard/amd/serengeti_leopard/Options.lb index 65da4f5ffe..0bab8aa2c1 100644 --- a/src/mainboard/amd/serengeti_leopard/Options.lb +++ b/src/mainboard/amd/serengeti_leopard/Options.lb @@ -21,8 +21,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -245,7 +245,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/amd/solo/Config.lb b/src/mainboard/amd/solo/Config.lb index ded0624979..f7efc861ad 100644 --- a/src/mainboard/amd/solo/Config.lb +++ b/src/mainboard/amd/solo/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/amd/solo/Options.lb b/src/mainboard/amd/solo/Options.lb index 934a2ea42a..beef9278c2 100644 --- a/src/mainboard/amd/solo/Options.lb +++ b/src/mainboard/amd/solo/Options.lb @@ -16,8 +16,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -146,7 +146,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/arima/hdama/Config.lb b/src/mainboard/arima/hdama/Config.lb index 8294053ae9..7d54512ce9 100644 --- a/src/mainboard/arima/hdama/Config.lb +++ b/src/mainboard/arima/hdama/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/arima/hdama/Options.lb b/src/mainboard/arima/hdama/Options.lb index a993e22624..07920f9c25 100644 --- a/src/mainboard/arima/hdama/Options.lb +++ b/src/mainboard/arima/hdama/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -163,7 +163,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/artecgroup/dbe61/Config.lb b/src/mainboard/artecgroup/dbe61/Config.lb index 94621eadaf..97975e7c36 100644 --- a/src/mainboard/artecgroup/dbe61/Config.lb +++ b/src/mainboard/artecgroup/dbe61/Config.lb @@ -14,13 +14,13 @@ end ## Compute the start location and size size of ## The linuxBIOS bootloader. ## -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/artecgroup/dbe61/Options.lb b/src/mainboard/artecgroup/dbe61/Options.lb index d53a24f4ba..69343b1edf 100644 --- a/src/mainboard/artecgroup/dbe61/Options.lb +++ b/src/mainboard/artecgroup/dbe61/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -20,7 +20,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -113,7 +113,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/asus/p2b/Config.lb b/src/mainboard/asus/p2b/Config.lb index 357a1013ff..69b08279a2 100644 --- a/src/mainboard/asus/p2b/Config.lb +++ b/src/mainboard/asus/p2b/Config.lb @@ -14,13 +14,13 @@ end ## Compute the start location and size size of ## The linuxBIOS bootloader. ## -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/asus/p2b/Options.lb b/src/mainboard/asus/p2b/Options.lb index e279926991..4cbea4bc5e 100644 --- a/src/mainboard/asus/p2b/Options.lb +++ b/src/mainboard/asus/p2b/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -20,7 +20,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -100,7 +100,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/bitworks/ims/Config.lb b/src/mainboard/bitworks/ims/Config.lb index 357a1013ff..69b08279a2 100644 --- a/src/mainboard/bitworks/ims/Config.lb +++ b/src/mainboard/bitworks/ims/Config.lb @@ -14,13 +14,13 @@ end ## Compute the start location and size size of ## The linuxBIOS bootloader. ## -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/bitworks/ims/Options.lb b/src/mainboard/bitworks/ims/Options.lb index bb4daaed8e..0c13bf6683 100644 --- a/src/mainboard/bitworks/ims/Options.lb +++ b/src/mainboard/bitworks/ims/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -20,7 +20,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -100,7 +100,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/broadcom/blast/Config.lb b/src/mainboard/broadcom/blast/Config.lb index 2b8ebd6b51..c9a22ca523 100644 --- a/src/mainboard/broadcom/blast/Config.lb +++ b/src/mainboard/broadcom/blast/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/broadcom/blast/Options.lb b/src/mainboard/broadcom/blast/Options.lb index 0b1dab38aa..812e198c58 100644 --- a/src/mainboard/broadcom/blast/Options.lb +++ b/src/mainboard/broadcom/blast/Options.lb @@ -17,8 +17,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -196,7 +196,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/dell/s1850/Config.lb b/src/mainboard/dell/s1850/Config.lb index 0640f389ab..af2133a739 100644 --- a/src/mainboard/dell/s1850/Config.lb +++ b/src/mainboard/dell/s1850/Config.lb @@ -20,12 +20,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/dell/s1850/Options.lb b/src/mainboard/dell/s1850/Options.lb index be726d7ca0..7c3cf69582 100644 --- a/src/mainboard/dell/s1850/Options.lb +++ b/src/mainboard/dell/s1850/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -155,7 +155,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM=1 +default CONFIG_ROM_PAYLOAD=1 ### diff --git a/src/mainboard/densitron/dpx114/Config.lb b/src/mainboard/densitron/dpx114/Config.lb index 05698b117d..83d7ef5138 100644 --- a/src/mainboard/densitron/dpx114/Config.lb +++ b/src/mainboard/densitron/dpx114/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/densitron/dpx114/Options.lb b/src/mainboard/densitron/dpx114/Options.lb index 6e5ef6c48b..86243a614d 100644 --- a/src/mainboard/densitron/dpx114/Options.lb +++ b/src/mainboard/densitron/dpx114/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -20,7 +20,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -98,7 +98,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/digitallogic/adl855pc/Config.lb b/src/mainboard/digitallogic/adl855pc/Config.lb index 2564eeff2b..0888104513 100644 --- a/src/mainboard/digitallogic/adl855pc/Config.lb +++ b/src/mainboard/digitallogic/adl855pc/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/digitallogic/adl855pc/Options.lb b/src/mainboard/digitallogic/adl855pc/Options.lb index d03efe4cb3..8606a0dcd2 100644 --- a/src/mainboard/digitallogic/adl855pc/Options.lb +++ b/src/mainboard/digitallogic/adl855pc/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses CONFIG_UDELAY_IO uses IRQ_SLOT_COUNT uses MAINBOARD @@ -21,7 +21,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -103,7 +103,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/digitallogic/msm586seg/Config.lb b/src/mainboard/digitallogic/msm586seg/Config.lb index 8f27fe694c..2ea32e6ba0 100644 --- a/src/mainboard/digitallogic/msm586seg/Config.lb +++ b/src/mainboard/digitallogic/msm586seg/Config.lb @@ -17,12 +17,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/digitallogic/msm586seg/Options.lb b/src/mainboard/digitallogic/msm586seg/Options.lb index dfee132b71..959b80e0bc 100644 --- a/src/mainboard/digitallogic/msm586seg/Options.lb +++ b/src/mainboard/digitallogic/msm586seg/Options.lb @@ -6,7 +6,7 @@ uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE uses CONFIG_COMPRESS -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses CONFIG_USE_INIT uses IRQ_SLOT_COUNT uses MAINBOARD @@ -22,7 +22,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -111,7 +111,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/digitallogic/msm800sev/Config.lb b/src/mainboard/digitallogic/msm800sev/Config.lb index b52f3a841d..3817dc5b52 100644 --- a/src/mainboard/digitallogic/msm800sev/Config.lb +++ b/src/mainboard/digitallogic/msm800sev/Config.lb @@ -14,13 +14,13 @@ end ## Compute the start location and size size of ## The linuxBIOS bootloader. ## -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/digitallogic/msm800sev/Options.lb b/src/mainboard/digitallogic/msm800sev/Options.lb index a525c76f17..4e73ccbfeb 100644 --- a/src/mainboard/digitallogic/msm800sev/Options.lb +++ b/src/mainboard/digitallogic/msm800sev/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -20,7 +20,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -114,7 +114,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/eaglelion/5bcm/Config.lb b/src/mainboard/eaglelion/5bcm/Config.lb index 364c7e7804..e0ef7fdbdd 100644 --- a/src/mainboard/eaglelion/5bcm/Config.lb +++ b/src/mainboard/eaglelion/5bcm/Config.lb @@ -14,13 +14,13 @@ end ## Compute the start location and size size of ## The linuxBIOS bootloader. ## -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/eaglelion/5bcm/Options.lb b/src/mainboard/eaglelion/5bcm/Options.lb index 10ceae2aa6..79ef88b22d 100644 --- a/src/mainboard/eaglelion/5bcm/Options.lb +++ b/src/mainboard/eaglelion/5bcm/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -20,7 +20,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -106,7 +106,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/embeddedplanet/ep405pc/Options.lb b/src/mainboard/embeddedplanet/ep405pc/Options.lb index 0da3af65c2..9b436f98c4 100644 --- a/src/mainboard/embeddedplanet/ep405pc/Options.lb +++ b/src/mainboard/embeddedplanet/ep405pc/Options.lb @@ -20,7 +20,7 @@ uses CONFIG_CONSOLE_SERIAL8250 uses TTYS0_BAUD TTYS0_DIV uses NO_POST uses CONFIG_IDE -uses CONFIG_FS_STREAM +uses CONFIG_FS_PAYLOAD uses CONFIG_FS_EXT2 uses CONFIG_FS_ISO9660 uses CONFIG_FS_FAT @@ -94,7 +94,7 @@ default TTYS0_BAUD=9600 ## Boot linux from IDE default CONFIG_IDE=1 -default CONFIG_FS_STREAM=1 +default CONFIG_FS_PAYLOAD=1 default CONFIG_FS_EXT2=1 default CONFIG_FS_ISO9660=1 default CONFIG_FS_FAT=1 diff --git a/src/mainboard/emulation/qemu-i386/Config.lb b/src/mainboard/emulation/qemu-i386/Config.lb index bddc6e3c59..ff8fb705ab 100644 --- a/src/mainboard/emulation/qemu-i386/Config.lb +++ b/src/mainboard/emulation/qemu-i386/Config.lb @@ -11,12 +11,12 @@ default ROM_SECTION_OFFSET = 0 ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/emulation/qemu-i386/Options.lb b/src/mainboard/emulation/qemu-i386/Options.lb index 3047b22e6d..62a8ddd8d2 100644 --- a/src/mainboard/emulation/qemu-i386/Options.lb +++ b/src/mainboard/emulation/qemu-i386/Options.lb @@ -9,7 +9,7 @@ uses CONFIG_COMPRESS uses CONFIG_COMPRESSED_PAYLOAD_NRV2B uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -24,7 +24,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses PAYLOAD_SIZE uses _ROMBASE uses _RAMBASE @@ -105,7 +105,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/ibm/e325/Config.lb b/src/mainboard/ibm/e325/Config.lb index 9d2e4fde56..a3fd588507 100644 --- a/src/mainboard/ibm/e325/Config.lb +++ b/src/mainboard/ibm/e325/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/ibm/e325/Options.lb b/src/mainboard/ibm/e325/Options.lb index 56f5e5c693..27e90af441 100644 --- a/src/mainboard/ibm/e325/Options.lb +++ b/src/mainboard/ibm/e325/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -147,7 +147,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/ibm/e326/Config.lb b/src/mainboard/ibm/e326/Config.lb index 4f6070fe1b..33cb22c789 100644 --- a/src/mainboard/ibm/e326/Config.lb +++ b/src/mainboard/ibm/e326/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/ibm/e326/Options.lb b/src/mainboard/ibm/e326/Options.lb index 875d455198..1bbd68646c 100644 --- a/src/mainboard/ibm/e326/Options.lb +++ b/src/mainboard/ibm/e326/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -153,7 +153,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/iei/nova4899r/Config.lb b/src/mainboard/iei/nova4899r/Config.lb index ee4d31c21c..ea87105a86 100644 --- a/src/mainboard/iei/nova4899r/Config.lb +++ b/src/mainboard/iei/nova4899r/Config.lb @@ -14,13 +14,13 @@ end ## Compute the start location and size size of ## The linuxBIOS bootloader. ## -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/iei/nova4899r/Options.lb b/src/mainboard/iei/nova4899r/Options.lb index be817ff267..e3007bdc65 100644 --- a/src/mainboard/iei/nova4899r/Options.lb +++ b/src/mainboard/iei/nova4899r/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -20,7 +20,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses PAYLOAD_SIZE uses _ROMBASE uses _RAMBASE @@ -114,7 +114,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/intel/jarrell/Config.lb b/src/mainboard/intel/jarrell/Config.lb index 69795b0026..5cea22a5c7 100644 --- a/src/mainboard/intel/jarrell/Config.lb +++ b/src/mainboard/intel/jarrell/Config.lb @@ -20,12 +20,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/intel/jarrell/Options.lb b/src/mainboard/intel/jarrell/Options.lb index 507d51dd59..3d099f41a4 100644 --- a/src/mainboard/intel/jarrell/Options.lb +++ b/src/mainboard/intel/jarrell/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -169,7 +169,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM=1 +default CONFIG_ROM_PAYLOAD=1 ### diff --git a/src/mainboard/intel/xe7501devkit/Config.lb b/src/mainboard/intel/xe7501devkit/Config.lb index 2e1986369e..fda810ff26 100644 --- a/src/mainboard/intel/xe7501devkit/Config.lb +++ b/src/mainboard/intel/xe7501devkit/Config.lb @@ -21,7 +21,7 @@ end ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/intel/xe7501devkit/Options.lb b/src/mainboard/intel/xe7501devkit/Options.lb index 3f100841b3..2fac701b8f 100644 --- a/src/mainboard/intel/xe7501devkit/Options.lb +++ b/src/mainboard/intel/xe7501devkit/Options.lb @@ -9,7 +9,7 @@ uses CONFIG_LOGICAL_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses STACK_SIZE uses HEAP_SIZE @@ -46,7 +46,7 @@ uses DEBUG uses CONFIG_IDE ## The default definitions are used for these -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses PAYLOAD_SIZE ## These are defined in target Config.lb, don't add here @@ -168,7 +168,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/iwill/dk8_htx/Config.lb b/src/mainboard/iwill/dk8_htx/Config.lb index 359e32991b..935c98f491 100644 --- a/src/mainboard/iwill/dk8_htx/Config.lb +++ b/src/mainboard/iwill/dk8_htx/Config.lb @@ -20,12 +20,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/iwill/dk8_htx/Options.lb b/src/mainboard/iwill/dk8_htx/Options.lb index 737e0fdbc2..c6cd9b9e9e 100644 --- a/src/mainboard/iwill/dk8_htx/Options.lb +++ b/src/mainboard/iwill/dk8_htx/Options.lb @@ -21,8 +21,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -264,7 +264,7 @@ default _RAMBASE=0x00100000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/iwill/dk8s2/Config.lb b/src/mainboard/iwill/dk8s2/Config.lb index 661411b4e8..230c2ac8ed 100644 --- a/src/mainboard/iwill/dk8s2/Config.lb +++ b/src/mainboard/iwill/dk8s2/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/iwill/dk8s2/Options.lb b/src/mainboard/iwill/dk8s2/Options.lb index d71e28e75d..74864e5381 100644 --- a/src/mainboard/iwill/dk8s2/Options.lb +++ b/src/mainboard/iwill/dk8s2/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -149,7 +149,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/iwill/dk8x/Config.lb b/src/mainboard/iwill/dk8x/Config.lb index a7ae47449d..e72046353e 100644 --- a/src/mainboard/iwill/dk8x/Config.lb +++ b/src/mainboard/iwill/dk8x/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/iwill/dk8x/Options.lb b/src/mainboard/iwill/dk8x/Options.lb index a5d5176b82..60e2075556 100644 --- a/src/mainboard/iwill/dk8x/Options.lb +++ b/src/mainboard/iwill/dk8x/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -148,7 +148,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/lippert/frontrunner/Config.lb b/src/mainboard/lippert/frontrunner/Config.lb index 556e3ccf14..3e3c521123 100644 --- a/src/mainboard/lippert/frontrunner/Config.lb +++ b/src/mainboard/lippert/frontrunner/Config.lb @@ -14,13 +14,13 @@ end ## Compute the start location and size size of ## The linuxBIOS bootloader. ## -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/lippert/frontrunner/Options.lb b/src/mainboard/lippert/frontrunner/Options.lb index 10ceae2aa6..79ef88b22d 100644 --- a/src/mainboard/lippert/frontrunner/Options.lb +++ b/src/mainboard/lippert/frontrunner/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -20,7 +20,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -106,7 +106,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/motorola/sandpoint/Options.lb b/src/mainboard/motorola/sandpoint/Options.lb index f17fc0ef82..b98ddb7ed3 100644 --- a/src/mainboard/motorola/sandpoint/Options.lb +++ b/src/mainboard/motorola/sandpoint/Options.lb @@ -22,7 +22,7 @@ uses NO_POST uses CONFIG_CONSOLE_SERIAL8250 uses TTYS0_BASE uses CONFIG_IDE -uses CONFIG_FS_STREAM +uses CONFIG_FS_PAYLOAD uses CONFIG_FS_EXT2 uses CONFIG_FS_ISO9660 uses CONFIG_FS_FAT @@ -83,7 +83,7 @@ default TTYS0_BASE=0x3f8 ## Load payload using filo default CONFIG_IDE=1 -default CONFIG_FS_STREAM=1 +default CONFIG_FS_PAYLOAD=1 default CONFIG_FS_EXT2=1 default CONFIG_FS_ISO9660=1 default CONFIG_FS_FAT=1 diff --git a/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb b/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb index f7970e4bdf..5f30b3387e 100644 --- a/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb +++ b/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb @@ -17,7 +17,7 @@ uses NO_POST uses CONFIG_CONSOLE_SERIAL8250 uses TTYS0_BASE uses CONFIG_IDE -uses CONFIG_FS_STREAM +uses CONFIG_FS_PAYLOAD uses CONFIG_FS_EXT2 uses CONFIG_FS_ISO9660 uses CONFIG_FS_FAT @@ -79,7 +79,7 @@ default TTYS0_BASE=0x3f8 ## Load payload using filo default CONFIG_IDE=1 -default CONFIG_FS_STREAM=1 +default CONFIG_FS_PAYLOAD=1 default CONFIG_FS_EXT2=1 default CONFIG_FS_ISO9660=1 default CONFIG_FS_FAT=1 diff --git a/src/mainboard/msi/ms9185/Config.lb b/src/mainboard/msi/ms9185/Config.lb index 34c48d1f5f..2c64b3d770 100644 --- a/src/mainboard/msi/ms9185/Config.lb +++ b/src/mainboard/msi/ms9185/Config.lb @@ -39,12 +39,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/msi/ms9185/Options.lb b/src/mainboard/msi/ms9185/Options.lb index 21856606a6..783d30a427 100644 --- a/src/mainboard/msi/ms9185/Options.lb +++ b/src/mainboard/msi/ms9185/Options.lb @@ -42,8 +42,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -266,7 +266,7 @@ default _RAMBASE=0x00100000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb index e4ed8538fe..3e0d33f4ed 100644 --- a/src/mainboard/newisys/khepri/Config.lb +++ b/src/mainboard/newisys/khepri/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/newisys/khepri/Options.lb b/src/mainboard/newisys/khepri/Options.lb index b4f1275f40..69d05f6f6d 100644 --- a/src/mainboard/newisys/khepri/Options.lb +++ b/src/mainboard/newisys/khepri/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -144,7 +144,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/olpc/btest/Config.lb b/src/mainboard/olpc/btest/Config.lb index 022dc5250a..d49e129af7 100644 --- a/src/mainboard/olpc/btest/Config.lb +++ b/src/mainboard/olpc/btest/Config.lb @@ -14,13 +14,13 @@ end ## Compute the start location and size size of ## The linuxBIOS bootloader. ## -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/olpc/btest/Options.lb b/src/mainboard/olpc/btest/Options.lb index 623d85630e..7d27ddc369 100644 --- a/src/mainboard/olpc/btest/Options.lb +++ b/src/mainboard/olpc/btest/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -20,7 +20,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_NRV2B uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD @@ -108,7 +108,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/olpc/rev_a/Config.lb b/src/mainboard/olpc/rev_a/Config.lb index 022dc5250a..d49e129af7 100644 --- a/src/mainboard/olpc/rev_a/Config.lb +++ b/src/mainboard/olpc/rev_a/Config.lb @@ -14,13 +14,13 @@ end ## Compute the start location and size size of ## The linuxBIOS bootloader. ## -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/olpc/rev_a/Options.lb b/src/mainboard/olpc/rev_a/Options.lb index 623d85630e..7d27ddc369 100644 --- a/src/mainboard/olpc/rev_a/Options.lb +++ b/src/mainboard/olpc/rev_a/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -20,7 +20,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_NRV2B uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD @@ -108,7 +108,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/sunw/ultra40/Config.lb b/src/mainboard/sunw/ultra40/Config.lb index a14e95ec03..82de7c3e1c 100644 --- a/src/mainboard/sunw/ultra40/Config.lb +++ b/src/mainboard/sunw/ultra40/Config.lb @@ -15,13 +15,13 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/sunw/ultra40/Options.lb b/src/mainboard/sunw/ultra40/Options.lb index 957e658cf9..a28aafa774 100644 --- a/src/mainboard/sunw/ultra40/Options.lb +++ b/src/mainboard/sunw/ultra40/Options.lb @@ -16,8 +16,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -213,7 +213,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/supermicro/x6dai_g/Config.lb b/src/mainboard/supermicro/x6dai_g/Config.lb index a246f16e5c..fe04f33b86 100644 --- a/src/mainboard/supermicro/x6dai_g/Config.lb +++ b/src/mainboard/supermicro/x6dai_g/Config.lb @@ -20,12 +20,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can be cached to speed up linuxBIOS, diff --git a/src/mainboard/supermicro/x6dai_g/Options.lb b/src/mainboard/supermicro/x6dai_g/Options.lb index c406eba944..495411f27d 100644 --- a/src/mainboard/supermicro/x6dai_g/Options.lb +++ b/src/mainboard/supermicro/x6dai_g/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -155,7 +155,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM=1 +default CONFIG_ROM_PAYLOAD=1 ### diff --git a/src/mainboard/supermicro/x6dhe_g/Config.lb b/src/mainboard/supermicro/x6dhe_g/Config.lb index 60be506e28..2ba628f574 100644 --- a/src/mainboard/supermicro/x6dhe_g/Config.lb +++ b/src/mainboard/supermicro/x6dhe_g/Config.lb @@ -20,12 +20,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of LinuxBIOS will start in the boot rom ## -default _ROMBASE =( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE =( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can be cached to speed up linuxBIOS. diff --git a/src/mainboard/supermicro/x6dhe_g/Options.lb b/src/mainboard/supermicro/x6dhe_g/Options.lb index 00aaf8f146..8fcd18cdb7 100644 --- a/src/mainboard/supermicro/x6dhe_g/Options.lb +++ b/src/mainboard/supermicro/x6dhe_g/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -155,7 +155,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM=1 +default CONFIG_ROM_PAYLOAD=1 ### diff --git a/src/mainboard/supermicro/x6dhe_g2/Config.lb b/src/mainboard/supermicro/x6dhe_g2/Config.lb index 37986b9605..02999838eb 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Config.lb +++ b/src/mainboard/supermicro/x6dhe_g2/Config.lb @@ -20,12 +20,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of LinuxBIOS will start in the boot rom ## -default _ROMBASE =( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE =( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can be cached to speed up linuxBIOS. diff --git a/src/mainboard/supermicro/x6dhe_g2/Options.lb b/src/mainboard/supermicro/x6dhe_g2/Options.lb index 00aaf8f146..8fcd18cdb7 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Options.lb +++ b/src/mainboard/supermicro/x6dhe_g2/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -155,7 +155,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM=1 +default CONFIG_ROM_PAYLOAD=1 ### diff --git a/src/mainboard/supermicro/x6dhr_ig/Config.lb b/src/mainboard/supermicro/x6dhr_ig/Config.lb index 3b4826bdfc..31425bfaa5 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Config.lb +++ b/src/mainboard/supermicro/x6dhr_ig/Config.lb @@ -20,12 +20,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/supermicro/x6dhr_ig/Options.lb b/src/mainboard/supermicro/x6dhr_ig/Options.lb index be726d7ca0..7c3cf69582 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Options.lb +++ b/src/mainboard/supermicro/x6dhr_ig/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -155,7 +155,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM=1 +default CONFIG_ROM_PAYLOAD=1 ### diff --git a/src/mainboard/supermicro/x6dhr_ig2/Config.lb b/src/mainboard/supermicro/x6dhr_ig2/Config.lb index c3c6b9a8f9..11df62618a 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Config.lb +++ b/src/mainboard/supermicro/x6dhr_ig2/Config.lb @@ -20,12 +20,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/supermicro/x6dhr_ig2/Options.lb b/src/mainboard/supermicro/x6dhr_ig2/Options.lb index be726d7ca0..7c3cf69582 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Options.lb +++ b/src/mainboard/supermicro/x6dhr_ig2/Options.lb @@ -15,8 +15,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -155,7 +155,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM=1 +default CONFIG_ROM_PAYLOAD=1 ### diff --git a/src/mainboard/technologic/ts5300/Config.lb b/src/mainboard/technologic/ts5300/Config.lb index ee9d8a7dcc..82ccec988b 100644 --- a/src/mainboard/technologic/ts5300/Config.lb +++ b/src/mainboard/technologic/ts5300/Config.lb @@ -17,12 +17,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/technologic/ts5300/Options.lb b/src/mainboard/technologic/ts5300/Options.lb index 0e203078fd..bb5894947e 100644 --- a/src/mainboard/technologic/ts5300/Options.lb +++ b/src/mainboard/technologic/ts5300/Options.lb @@ -6,7 +6,7 @@ uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE uses CONFIG_COMPRESS -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses CONFIG_USE_INIT uses IRQ_SLOT_COUNT uses MAINBOARD @@ -22,7 +22,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -134,7 +134,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/totalimpact/briq/Options.lb b/src/mainboard/totalimpact/briq/Options.lb index 660b6ce23e..1c5218bec4 100644 --- a/src/mainboard/totalimpact/briq/Options.lb +++ b/src/mainboard/totalimpact/briq/Options.lb @@ -18,7 +18,7 @@ uses DEFAULT_CONSOLE_LOGLEVEL uses CONFIG_USE_INIT uses NO_POST uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_IDE_STREAM +uses CONFIG_IDE_PAYLOAD uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses IDE_BOOT_DRIVE uses IDE_SWAB IDE_OFFSET @@ -80,7 +80,7 @@ default DEFAULT_CONSOLE_LOGLEVEL=8 default CONFIG_CONSOLE_SERIAL8250=1 ## Boot linux from IDE -default CONFIG_IDE_STREAM=1 +default CONFIG_IDE_PAYLOAD=1 default IDE_BOOT_DRIVE=0 default IDE_SWAB=1 default IDE_OFFSET=0 diff --git a/src/mainboard/tyan/s2735/Config.lb b/src/mainboard/tyan/s2735/Config.lb index 3977db16b9..46f1b3821f 100644 --- a/src/mainboard/tyan/s2735/Config.lb +++ b/src/mainboard/tyan/s2735/Config.lb @@ -15,13 +15,13 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/tyan/s2735/Options.lb b/src/mainboard/tyan/s2735/Options.lb index d5b5903a2d..7630dbf5b7 100644 --- a/src/mainboard/tyan/s2735/Options.lb +++ b/src/mainboard/tyan/s2735/Options.lb @@ -17,8 +17,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -190,7 +190,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/tyan/s2850/Config.lb b/src/mainboard/tyan/s2850/Config.lb index e227bc1542..e6ca2c304b 100644 --- a/src/mainboard/tyan/s2850/Config.lb +++ b/src/mainboard/tyan/s2850/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb index bfd04916fe..c6a971590e 100644 --- a/src/mainboard/tyan/s2850/Options.lb +++ b/src/mainboard/tyan/s2850/Options.lb @@ -16,8 +16,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -181,7 +181,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/tyan/s2875/Config.lb b/src/mainboard/tyan/s2875/Config.lb index 13596a2bec..4f1c6e4658 100644 --- a/src/mainboard/tyan/s2875/Config.lb +++ b/src/mainboard/tyan/s2875/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb index 7048a186e6..d5de39716d 100644 --- a/src/mainboard/tyan/s2875/Options.lb +++ b/src/mainboard/tyan/s2875/Options.lb @@ -16,8 +16,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -182,7 +182,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb index d6f907f387..bd4289ff56 100644 --- a/src/mainboard/tyan/s2880/Config.lb +++ b/src/mainboard/tyan/s2880/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb index ee8d6df0ca..5c2790336f 100644 --- a/src/mainboard/tyan/s2880/Options.lb +++ b/src/mainboard/tyan/s2880/Options.lb @@ -16,8 +16,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -181,7 +181,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb index 598f9b4a36..05ff5c7234 100644 --- a/src/mainboard/tyan/s2881/Config.lb +++ b/src/mainboard/tyan/s2881/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb index da51338cb8..cde41618d4 100644 --- a/src/mainboard/tyan/s2881/Options.lb +++ b/src/mainboard/tyan/s2881/Options.lb @@ -16,8 +16,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -198,7 +198,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb index 42c193be58..496d8177d9 100644 --- a/src/mainboard/tyan/s2882/Config.lb +++ b/src/mainboard/tyan/s2882/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb index 95cdd8a358..76abc5cb60 100644 --- a/src/mainboard/tyan/s2882/Options.lb +++ b/src/mainboard/tyan/s2882/Options.lb @@ -16,8 +16,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -181,7 +181,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index 2a035a35ab..795485df6d 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index bbc4f00ed9..7a540c3618 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -16,8 +16,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -208,7 +208,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb index f23e75b7e2..1c0b79ecf7 100644 --- a/src/mainboard/tyan/s2891/Config.lb +++ b/src/mainboard/tyan/s2891/Config.lb @@ -15,13 +15,13 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index 3eafa9e6fc..c7530dc95d 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -16,8 +16,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -217,7 +217,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb index dcb0c45abf..0c3e2ae8a4 100644 --- a/src/mainboard/tyan/s2892/Config.lb +++ b/src/mainboard/tyan/s2892/Config.lb @@ -15,13 +15,13 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index e798e865a5..b5a3dc260c 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -16,8 +16,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -204,7 +204,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb index 9afaf70d8f..f24b07d5cb 100644 --- a/src/mainboard/tyan/s2895/Config.lb +++ b/src/mainboard/tyan/s2895/Config.lb @@ -20,12 +20,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index 426b239765..96e7d67e57 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -19,8 +19,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -225,7 +225,7 @@ default _RAMBASE=0x00100000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb index 54fc432d72..df44242896 100644 --- a/src/mainboard/tyan/s4880/Config.lb +++ b/src/mainboard/tyan/s4880/Config.lb @@ -15,13 +15,13 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb index a9493ed954..1755f8c134 100644 --- a/src/mainboard/tyan/s4880/Options.lb +++ b/src/mainboard/tyan/s4880/Options.lb @@ -16,8 +16,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -190,7 +190,7 @@ default _RAMBASE=0x00004000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb index 05e898814e..d128842c28 100644 --- a/src/mainboard/tyan/s4882/Config.lb +++ b/src/mainboard/tyan/s4882/Config.lb @@ -15,13 +15,13 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb index b1cd548a10..cdafd41fe5 100644 --- a/src/mainboard/tyan/s4882/Options.lb +++ b/src/mainboard/tyan/s4882/Options.lb @@ -16,8 +16,8 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -189,7 +189,7 @@ default _RAMBASE=0x00002000 ## ## Load the payload from the ROM ## -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ### ### Defaults of options that you may want to override in the target config file diff --git a/src/mainboard/via/epia-m/Config.lb b/src/mainboard/via/epia-m/Config.lb index e5e10df028..a3e4b41486 100644 --- a/src/mainboard/via/epia-m/Config.lb +++ b/src/mainboard/via/epia-m/Config.lb @@ -15,12 +15,12 @@ end ## The linuxBIOS bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/via/epia-m/Options.lb b/src/mainboard/via/epia-m/Options.lb index 60e7b22fab..89cdc470b8 100644 --- a/src/mainboard/via/epia-m/Options.lb +++ b/src/mainboard/via/epia-m/Options.lb @@ -5,7 +5,7 @@ uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -20,8 +20,9 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_NRV2B +uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE uses _RAMBASE @@ -115,7 +116,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/mainboard/via/epia/Config.lb b/src/mainboard/via/epia/Config.lb index 14bb1acd9d..4dc9511990 100644 --- a/src/mainboard/via/epia/Config.lb +++ b/src/mainboard/via/epia/Config.lb @@ -14,13 +14,13 @@ end ## Compute the start location and size size of ## The linuxBIOS bootloader. ## -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## ## Compute where this copy of linuxBIOS will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## ## Compute a range of ROM that can cached to speed up linuxBIOS, diff --git a/src/mainboard/via/epia/Options.lb b/src/mainboard/via/epia/Options.lb index f80ceaa9e1..c3af994a6f 100644 --- a/src/mainboard/via/epia/Options.lb +++ b/src/mainboard/via/epia/Options.lb @@ -13,7 +13,7 @@ uses HAVE_HARD_RESET uses CONFIG_UDELAY_IO uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM +uses CONFIG_ROM_PAYLOAD uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -28,7 +28,7 @@ uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE uses ROM_SECTION_SIZE uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses PAYLOAD_SIZE uses _ROMBASE @@ -126,7 +126,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 -default CONFIG_ROM_STREAM = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler diff --git a/src/stream/Config.lb b/src/stream/Config.lb index 0385d63028..191b593b4c 100644 --- a/src/stream/Config.lb +++ b/src/stream/Config.lb @@ -1,23 +1,23 @@ -uses CONFIG_ROM_STREAM -uses CONFIG_IDE_STREAM -uses CONFIG_FS_STREAM +uses CONFIG_ROM_PAYLOAD +uses CONFIG_IDE_PAYLOAD +uses CONFIG_FS_PAYLOAD uses CONFIG_IDE -uses CONFIG_SERIAL_STREAM +uses CONFIG_SERIAL_PAYLOAD -if CONFIG_ROM_STREAM +if CONFIG_ROM_PAYLOAD object rom_stream.o end -if CONFIG_IDE_STREAM +if CONFIG_IDE_PAYLOAD default CONFIG_IDE=1 object ide_stream.o end -if CONFIG_FS_STREAM +if CONFIG_FS_PAYLOAD object fs_stream.o dir fs end -if CONFIG_SERIAL_STREAM +if CONFIG_SERIAL_PAYLOAD object serial_stream.o end diff --git a/src/stream/rom_stream.c b/src/stream/rom_stream.c index 2000c5f576..9be265e8af 100644 --- a/src/stream/rom_stream.c +++ b/src/stream/rom_stream.c @@ -30,21 +30,21 @@ extern unsigned char _heap, _eheap; #include "../lib/lzma.c" #endif -#ifndef CONFIG_ROM_STREAM_START -#define CONFIG_ROM_STREAM_START 0xffff0000UL +#ifndef CONFIG_ROM_PAYLOAD_START +#define CONFIG_ROM_PAYLOAD_START 0xffff0000UL #endif /* well, this is a mess, and it will get fixed, but not right away. * until we stop using 'ld' for building the rom image, that is. - * problem is, that on the sc520, ROM_STREAM_START has to be at 0x2000000. - * but if you set CONFIG_ROM_STREAM_START to that, then ld will try to + * problem is, that on the sc520, ROM_PAYLOAD_START has to be at 0x2000000. + * but if you set CONFIG_ROM_PAYLOAD_START to that, then ld will try to * build a giant image: 0x0-0x2000000, i.e. almost 4 GB. * so make this non-static, non-const for now. */ /*XXXXXXXXXXXXXX */ -/*static const */unsigned char *rom_start = (unsigned char *)CONFIG_ROM_STREAM_START; -/*static const */unsigned char *rom_end = (unsigned char *)(CONFIG_ROM_STREAM_START + PAYLOAD_SIZE - 1); +/*static const */unsigned char *rom_start = (unsigned char *)CONFIG_ROM_PAYLOAD_START; +/*static const */unsigned char *rom_end = (unsigned char *)(CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE - 1); /*XXXXXXXXXXXXXX */ static const unsigned char *rom; diff --git a/targets/arima/hdama/Config.kernelimage.lb b/targets/arima/hdama/Config.kernelimage.lb index a80eb2b9a5..878489819d 100644 --- a/targets/arima/hdama/Config.kernelimage.lb +++ b/targets/arima/hdama/Config.kernelimage.lb @@ -9,8 +9,8 @@ target hdama uses ARCH uses CONFIG_COMPRESS uses CONFIG_IOAPIC -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START uses CONFIG_UDELAY_TSC uses CPU_FIXUP uses FALLBACK_SIZE @@ -68,7 +68,7 @@ option ROM_SIZE=1024*1024 option HAVE_OPTION_TABLE=1 -option CONFIG_ROM_STREAM=1 +option CONFIG_ROM_PAYLOAD=1 option HAVE_FALLBACK_BOOT=1 ### diff --git a/targets/embeddedplanet/ep405pc/Config.lb b/targets/embeddedplanet/ep405pc/Config.lb index f434bfaf95..659c7c276f 100644 --- a/targets/embeddedplanet/ep405pc/Config.lb +++ b/targets/embeddedplanet/ep405pc/Config.lb @@ -32,7 +32,7 @@ romimage "normal" ## Boot linux from IDE option CONFIG_IDE=1 - option CONFIG_FS_STREAM=1 + option CONFIG_FS_PAYLOAD=1 option CONFIG_FS_EXT2=1 option CONFIG_FS_ISO9660=1 option CONFIG_FS_FAT=1 diff --git a/targets/iwill/dk8s2/Config.lb b/targets/iwill/dk8s2/Config.lb index 6d01b31f08..ced9197fd5 100644 --- a/targets/iwill/dk8s2/Config.lb +++ b/targets/iwill/dk8s2/Config.lb @@ -119,7 +119,7 @@ option HEAP_SIZE=0xe000 ### Compute the start location and size size of ### The linuxBIOS bootloader. ### -option CONFIG_ROM_STREAM = 1 +option CONFIG_ROM_PAYLOAD = 1 # # @@ -134,8 +134,8 @@ romimage "normal" option ROM_SECTION_OFFSET= 0 option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) - option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE) + option CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) + option _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE) # option XIP_ROM_SIZE = FALLBACK_SIZE option XIP_ROM_SIZE = 65536 @@ -153,8 +153,8 @@ romimage "fallback" option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE) option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) - option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE) + option CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) + option _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE) # option XIP_ROM_SIZE = FALLBACK_SIZE option XIP_ROM_SIZE = 65536 diff --git a/targets/motorola/sandpoint/Config.lb.ide_stream b/targets/motorola/sandpoint/Config.lb.ide_stream index c9b77c36db..85b5c7792a 100644 --- a/targets/motorola/sandpoint/Config.lb.ide_stream +++ b/targets/motorola/sandpoint/Config.lb.ide_stream @@ -16,7 +16,7 @@ uses CONFIG_CHIP_CONFIGURE uses NO_POST uses CONFIG_CONSOLE_SERIAL8250 uses TTYS0_BASE -uses CONFIG_IDE_STREAM +uses CONFIG_IDE_PAYLOAD uses IDE_BOOT_DRIVE uses IDE_SWAB IDE_OFFSET uses ROM_SIZE @@ -51,7 +51,7 @@ option CONFIG_CONSOLE_SERIAL8250=1 option TTYS0_BASE=0x3f8 ## Boot linux from IDE -option CONFIG_IDE_STREAM=1 +option CONFIG_IDE_PAYLOAD=1 option IDE_BOOT_DRIVE=0 option IDE_SWAB=1 option IDE_OFFSET=0 diff --git a/targets/newisys/khepri/Config.lb b/targets/newisys/khepri/Config.lb index 7755066eff..a6ffad22b9 100644 --- a/targets/newisys/khepri/Config.lb +++ b/targets/newisys/khepri/Config.lb @@ -20,7 +20,7 @@ option CONFIG_CONSOLE_SERIAL8250=1 option ROM_SIZE=512*1024 option HAVE_OPTION_TABLE=1 -option CONFIG_ROM_STREAM=1 +option CONFIG_ROM_PAYLOAD=1 option HAVE_FALLBACK_BOOT=1 option FALLBACK_SIZE=131072 diff --git a/targets/totalimpact/briq/Config.lb b/targets/totalimpact/briq/Config.lb index 0e16ec3787..08890634a4 100644 --- a/targets/totalimpact/briq/Config.lb +++ b/targets/totalimpact/briq/Config.lb @@ -19,7 +19,7 @@ option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 ## Boot linux from IDE -option CONFIG_IDE_STREAM=1 +option CONFIG_IDE_PAYLOAD=1 option IDE_BOOT_DRIVE=0 option IDE_SWAB=1 option IDE_OFFSET=0 diff --git a/targets/via/epia-m/Config-abuild.lb b/targets/via/epia-m/Config-abuild.lb index 194f25baca..42268f0eca 100644 --- a/targets/via/epia-m/Config-abuild.lb +++ b/targets/via/epia-m/Config-abuild.lb @@ -12,7 +12,7 @@ __COMPRESSION__ option ROM_SIZE=256*1024 option HAVE_OPTION_TABLE=1 -option CONFIG_ROM_STREAM=1 +option CONFIG_ROM_PAYLOAD=1 option HAVE_FALLBACK_BOOT=1 ### diff --git a/targets/via/epia-m/Config.512kflash.lb b/targets/via/epia-m/Config.512kflash.lb index 2c65687185..518df0c2dd 100644 --- a/targets/via/epia-m/Config.512kflash.lb +++ b/targets/via/epia-m/Config.512kflash.lb @@ -13,7 +13,7 @@ option ROM_SIZE=512*1024 option HAVE_OPTION_TABLE=1 -option CONFIG_ROM_STREAM=1 +option CONFIG_ROM_PAYLOAD=1 option HAVE_FALLBACK_BOOT=1 ### diff --git a/targets/via/epia-m/Config.etherboot.lb b/targets/via/epia-m/Config.etherboot.lb index fea735586f..4a61fe6138 100644 --- a/targets/via/epia-m/Config.etherboot.lb +++ b/targets/via/epia-m/Config.etherboot.lb @@ -12,7 +12,7 @@ option CONFIG_CONSOLE_SERIAL8250=1 option ROM_SIZE=256*1024 option HAVE_OPTION_TABLE=1 -option CONFIG_ROM_STREAM=1 +option CONFIG_ROM_PAYLOAD=1 option HAVE_FALLBACK_BOOT=1 ### diff --git a/targets/via/epia-m/Config.filo.lb b/targets/via/epia-m/Config.filo.lb index 3cdfe8c224..a00269c4fb 100644 --- a/targets/via/epia-m/Config.filo.lb +++ b/targets/via/epia-m/Config.filo.lb @@ -12,7 +12,7 @@ option CONFIG_CONSOLE_SERIAL8250=1 option ROM_SIZE=256*1024 option HAVE_OPTION_TABLE=1 -option CONFIG_ROM_STREAM=1 +option CONFIG_ROM_PAYLOAD=1 option HAVE_FALLBACK_BOOT=1 ### diff --git a/targets/via/epia-m/Config.lb b/targets/via/epia-m/Config.lb index 0bc5779288..f086973295 100644 --- a/targets/via/epia-m/Config.lb +++ b/targets/via/epia-m/Config.lb @@ -11,7 +11,7 @@ option ROM_SIZE=256*1024 option HAVE_OPTION_TABLE=1 -option CONFIG_ROM_STREAM=1 +option CONFIG_ROM_PAYLOAD=1 option HAVE_FALLBACK_BOOT=1 #option CONFIG_COMPRESSED_PAYLOAD_NRV2B=1 option CONFIG_COMPRESSED_PAYLOAD_NRV2B=0 diff --git a/targets/via/epia-m/Config.vga.filo b/targets/via/epia-m/Config.vga.filo index 6e58655067..6af2786c71 100644 --- a/targets/via/epia-m/Config.vga.filo +++ b/targets/via/epia-m/Config.vga.filo @@ -11,7 +11,7 @@ option CONFIG_CONSOLE_SERIAL8250=1 option ROM_SIZE=256*1024 option HAVE_OPTION_TABLE=1 -option CONFIG_ROM_STREAM=1 +option CONFIG_ROM_PAYLOAD=1 option HAVE_FALLBACK_BOOT=1 ### |