summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/lippert/roadrunner-lx/devicetree.cb8
-rw-r--r--src/mainboard/lippert/roadrunner-lx/romstage.c11
-rw-r--r--src/mainboard/lippert/spacerunner-lx/devicetree.cb8
-rw-r--r--src/mainboard/lippert/spacerunner-lx/romstage.c11
4 files changed, 18 insertions, 20 deletions
diff --git a/src/mainboard/lippert/roadrunner-lx/devicetree.cb b/src/mainboard/lippert/roadrunner-lx/devicetree.cb
index ea170014dd..eae847999a 100644
--- a/src/mainboard/lippert/roadrunner-lx/devicetree.cb
+++ b/src/mainboard/lippert/roadrunner-lx/devicetree.cb
@@ -48,8 +48,8 @@ chip northbridge/amd/lx
irq 0x70 = 7
end
device pnp 2e.4 on # EC
- io 0x60 = 0x290
- io 0x62 = 0x230
+ io 0x60 = 0x290 # EC
+ io 0x62 = 0x298 # PME
irq 0x70 = 9
end
device pnp 2e.5 on # PS/2 keyboard
@@ -61,8 +61,8 @@ chip northbridge/amd/lx
irq 0x70 = 12
end
device pnp 2e.7 on # GPIO
- io 0x62 = 0x1220
- # io 0x64 = 0x1200
+ io 0x62 = 0x1220 # Simple I/O
+ # io 0x64 = 0x1228 # SPI
end
device pnp 2e.8 off # MIDI
io 0x60 = 0x300
diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c
index 717f51a5ac..7429e4682c 100644
--- a/src/mainboard/lippert/roadrunner-lx/romstage.c
+++ b/src/mainboard/lippert/roadrunner-lx/romstage.c
@@ -63,16 +63,15 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
static const u16 sio_init_table[] = { // hi=data, lo=index
0x0707, // select LDN 7 (GPIO, SPI, watchdog, ...)
- 0x1E2C, // disable ATXPowerGood - will cause a reboot!
- 0x0423, // don't delay POWerOK1/2
- 0x9072, // watchdog triggers POWOK, counts seconds
+ 0x1E2C, // disable ATXPG; VIN6,FAN4/5,VIN3 enabled, VIN7 internal
+ 0x1423, // don't delay PoWeROK1/2 - triggers 2nd reset
+ 0x9072, // watchdog triggers PWROK, counts seconds
#if !CONFIG_USE_WATCHDOG_ON_BOOT
- 0x0073, 0x0074, // disable watchdog by setting timeout to 0
+ 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0
#endif
0xBF25, 0x372A, 0xF326, // select GPIO function for most pins
0xBF27, 0xFF28, 0x2529, // (GP36=FAN_CTL3, GP13=PWROK1)
- 0x1E2C, // VIN6=enabled?, FAN4/5 enabled, VIN7=internal, VIN3=enabled
- 0x46B8, 0x0CB9, // enable pullups
+ 0x46B8, 0x0CB9, // enable pullups on RS485_EN
0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1
0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector)
0x26C8, // config GP15,12,11 as output; GP14 as input
diff --git a/src/mainboard/lippert/spacerunner-lx/devicetree.cb b/src/mainboard/lippert/spacerunner-lx/devicetree.cb
index 5eeb7fc8c1..1fd2c54941 100644
--- a/src/mainboard/lippert/spacerunner-lx/devicetree.cb
+++ b/src/mainboard/lippert/spacerunner-lx/devicetree.cb
@@ -49,8 +49,8 @@ chip northbridge/amd/lx
irq 0x70 = 7
end
device pnp 2e.4 on # EC
- io 0x60 = 0x290
- io 0x62 = 0x230
+ io 0x60 = 0x290 # EC
+ io 0x62 = 0x298 # PME
irq 0x70 = 9
end
device pnp 2e.5 on # PS/2 keyboard
@@ -62,8 +62,8 @@ chip northbridge/amd/lx
irq 0x70 = 12
end
device pnp 2e.7 on # GPIO
- io 0x62 = 0x1220
- io 0x64 = 0x1200
+ io 0x62 = 0x1220 # Simple I/O
+ io 0x64 = 0x1228 # SPI
end
device pnp 2e.8 off # MIDI
io 0x60 = 0x300
diff --git a/src/mainboard/lippert/spacerunner-lx/romstage.c b/src/mainboard/lippert/spacerunner-lx/romstage.c
index 5c640cb021..66d92b34eb 100644
--- a/src/mainboard/lippert/spacerunner-lx/romstage.c
+++ b/src/mainboard/lippert/spacerunner-lx/romstage.c
@@ -129,16 +129,15 @@ static int smc_send_config(unsigned char config_data)
static const u16 sio_init_table[] = { // hi=data, lo=index
0x0707, // select LDN 7 (GPIO, SPI, watchdog, ...)
- 0x1E2C, // disable ATXPowerGood
- 0x0423, // don't delay POWerOK1/2
- 0x9072, // watchdog triggers POWOK, counts seconds
+ 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal
+ 0x1423, // don't delay PoWeROK1/2
+ 0x9072, // watchdog triggers PWROK, counts seconds
#if !CONFIG_USE_WATCHDOG_ON_BOOT
- 0x0073, 0x0074, // disable watchdog by setting timeout to 0
+ 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0
#endif
0xBF25, 0x172A, 0xF326, // select GPIO function for most pins
0xFF27, 0xDF28, 0x2729, // (GP45=SUSB, GP23,22,16,15=SPI, GP13=PWROK1)
- 0x072C, // VIN6=enabled?, FAN4/5 disabled, VIN7=internal, VIN3=internal
- 0x66B8, 0x0CB9, // enable pullups
+ 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN
0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED
0x07C8, // config GP12-10 as output
0x2DF5, // map Hw Monitor Thermal Output to GP55