diff options
| -rw-r--r-- | src/southbridge/amd/sb600/sb600_enable_usbdebug.c | 27 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_enable_usbdebug.c | 27 | ||||
| -rw-r--r-- | src/southbridge/intel/i82801gx/i82801gx_usb_debug.c | 23 | ||||
| -rw-r--r-- | src/southbridge/nvidia/mcp55/mcp55_enable_usbdebug.c | 42 | ||||
| -rw-r--r-- | src/southbridge/sis/sis966/sis966_enable_usbdebug.c | 44 |
5 files changed, 98 insertions, 65 deletions
diff --git a/src/southbridge/amd/sb600/sb600_enable_usbdebug.c b/src/southbridge/amd/sb600/sb600_enable_usbdebug.c index 64b016e0d6..6a150aded0 100644 --- a/src/southbridge/amd/sb600/sb600_enable_usbdebug.c +++ b/src/southbridge/amd/sb600/sb600_enable_usbdebug.c @@ -17,25 +17,30 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <stdint.h> #include <usbdebug.h> +#include <device/pci_def.h> -#ifndef SB600_DEVN_BASE -#define SB600_DEVN_BASE 0 -#endif - -#define EHCI_BAR_INDEX 0x10 -#define EHCI_BAR 0xFEF00000 -#define EHCI_DEBUG_OFFSET 0xE0 +#define EHCI_BAR 0xFEF00000 /* EHCI BAR address */ +#define EHCI_BAR_INDEX 0x10 /* TODO: DBUG_PRT[31:29] */ +#define EHCI_DEBUG_OFFSET 0xE0 /* Hardcoded to 0xE0 */ /* Required for successful build, but currently empty. */ void set_debug_port(unsigned int port) { + /* TODO: Allow changing the physical USB port used as Debug Port. */ } -static void sb600_enable_usbdebug(u32 port) +static void sb600_enable_usbdebug(unsigned int port) { + device_t dev = PCI_DEV(0, 0x13, 5); /* USB EHCI, D19:F5 */ + + /* Select the requested physical USB port (1-15) as the Debug Port. */ set_debug_port(port); - pci_write_config32(PCI_DEV(0, SB600_DEVN_BASE + 0x13, 5), - EHCI_BAR_INDEX, EHCI_BAR); - pci_write_config8(PCI_DEV(0, SB600_DEVN_BASE + 0x13, 5), 0x04, 0x2); /* mem space enable */ + + /* Set the EHCI BAR address. */ + pci_write_config32(dev, EHCI_BAR_INDEX, EHCI_BAR); + + /* Enable access to the EHCI memory space registers. */ + pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY); } diff --git a/src/southbridge/amd/sb700/sb700_enable_usbdebug.c b/src/southbridge/amd/sb700/sb700_enable_usbdebug.c index 06bcab77a3..0f40d862a7 100644 --- a/src/southbridge/amd/sb700/sb700_enable_usbdebug.c +++ b/src/southbridge/amd/sb700/sb700_enable_usbdebug.c @@ -17,25 +17,30 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <stdint.h> #include <usbdebug.h> +#include <device/pci_def.h> -#ifndef SB700_DEVN_BASE -#define SB700_DEVN_BASE 0 -#endif - -#define EHCI_BAR_INDEX 0x10 -#define EHCI_BAR 0xFEF00000 -#define EHCI_DEBUG_OFFSET 0xE0 +#define EHCI_BAR 0xFEF00000 /* EHCI BAR address */ +#define EHCI_BAR_INDEX 0x10 /* TODO: DBUG_PRT[31:29] */ +#define EHCI_DEBUG_OFFSET 0xE0 /* Hardcoded to 0xE0 */ /* Required for successful build, but currently empty. */ void set_debug_port(unsigned int port) { + /* TODO: Allow changing the physical USB port used as Debug Port. */ } -static void sb700_enable_usbdebug(u32 port) +static void sb700_enable_usbdebug(unsigned int port) { + device_t dev = PCI_DEV(0, 0x13, 5); /* USB EHCI, D19:F5 */ + + /* Select the requested physical USB port (1-15) as the Debug Port. */ set_debug_port(port); - pci_write_config32(PCI_DEV(0, SB700_DEVN_BASE + 0x13, 5), - EHCI_BAR_INDEX, EHCI_BAR); - pci_write_config8(PCI_DEV(0, SB700_DEVN_BASE + 0x13, 5), 0x04, 0x2); /* mem space enable */ + + /* Set the EHCI BAR address. */ + pci_write_config32(dev, EHCI_BAR_INDEX, EHCI_BAR); + + /* Enable access to the EHCI memory space registers. */ + pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY); } diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c b/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c index 4fa3cb7aed..464dac2b92 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c +++ b/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c @@ -17,16 +17,13 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <stdint.h> #include <usbdebug.h> +#include <device/pci_def.h> -// An arbitrary address for the BAR -#define EHCI_BAR 0xFEF00000 -// These could be read from DEBUG_BASE (0:1d.7 R 0x5A 16bit) -#define EHCI_BAR_INDEX 0x10 - -#define EHCI_CONFIG_FLAG 0x40 -#define EHCI_PORTSC 0x44 -#define EHCI_DEBUG_OFFSET 0xA0 +#define EHCI_BAR 0xFEF00000 /* EHCI BAR address */ +#define EHCI_BAR_INDEX 0x10 /* Hardwired 0x10 (>= ICH4). */ +#define EHCI_DEBUG_OFFSET 0xA0 /* Hardwired 0xa0 (>= ICH5). */ /* Required for successful build, but currently empty. */ void set_debug_port(unsigned int port) @@ -37,13 +34,17 @@ void set_debug_port(unsigned int port) static void i82801gx_enable_usbdebug(unsigned int port) { u32 dbgctl; + device_t dev = PCI_DEV(0, 0x1d, 7); /* USB EHCI, D29:F7 */ + + /* Set the EHCI BAR address. */ + pci_write_config32(dev, EHCI_BAR_INDEX, EHCI_BAR); - pci_write_config32(PCI_DEV(0, 0x1d, 7), EHCI_BAR_INDEX, EHCI_BAR); - pci_write_config8(PCI_DEV(0, 0x1d, 7), 0x04, 0x2); // Memory Space Enable + /* Enable access to the EHCI memory space registers. */ + pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY); + /* Force ownership of the Debug Port to the EHCI controller. */ printk(BIOS_DEBUG, "Enabling OWNER_CNT\n"); dbgctl = read32(EHCI_BAR + EHCI_DEBUG_OFFSET); dbgctl |= (1 << 30); write32(EHCI_BAR + EHCI_DEBUG_OFFSET, dbgctl); } - diff --git a/src/southbridge/nvidia/mcp55/mcp55_enable_usbdebug.c b/src/southbridge/nvidia/mcp55/mcp55_enable_usbdebug.c index 280e827cc9..f1f5c2ab11 100644 --- a/src/southbridge/nvidia/mcp55/mcp55_enable_usbdebug.c +++ b/src/southbridge/nvidia/mcp55/mcp55_enable_usbdebug.c @@ -21,32 +21,42 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <stdint.h> +#include <usbdebug.h> +#include <device/pci_def.h> + #if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20 - #define MCP55_DEVN_BASE CONFIG_HT_CHAIN_END_UNITID_BASE +#define MCP55_DEVN_BASE CONFIG_HT_CHAIN_END_UNITID_BASE #else - #define MCP55_DEVN_BASE CONFIG_HT_CHAIN_UNITID_BASE +#define MCP55_DEVN_BASE CONFIG_HT_CHAIN_UNITID_BASE #endif -#define EHCI_BAR_INDEX 0x10 -#define EHCI_BAR 0xFEF00000 +#define EHCI_BAR 0xFEF00000 /* EHCI BAR address */ +#define EHCI_BAR_INDEX 0x10 #define EHCI_DEBUG_OFFSET 0x98 -#include <usbdebug.h> - -void set_debug_port(unsigned port) +void set_debug_port(unsigned int port) { - uint32_t dword; - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+2, 1), 0x74); - dword &= ~(0xf<<12); - dword |= (port<<12); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+2, 1), 0x74, dword); + u32 dword; + device_t dev = PCI_DEV(0, MCP55_DEVN_BASE + 2, 1); /* USB EHCI */ + /* Write the port number to 0x74[15:12]. */ + dword = pci_read_config32(dev, 0x74); + dword &= ~(0xf << 12); + dword |= (port << 12); + pci_write_config32(dev, 0x74, dword); } -static void mcp55_enable_usbdebug(unsigned port) +static void mcp55_enable_usbdebug(unsigned int port) { + device_t dev = PCI_DEV(0, MCP55_DEVN_BASE + 2, 1); /* USB EHCI */ + + /* Mark the requested physical USB port (1-15) as the Debug Port. */ set_debug_port(port); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+2, 1), EHCI_BAR_INDEX, EHCI_BAR); - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+2, 1), 0x04, 0x2); // mem space enabe -} + /* Set the EHCI BAR address. */ + pci_write_config32(dev, EHCI_BAR_INDEX, EHCI_BAR); + + /* Enable access to the EHCI memory space registers. */ + pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY); +} diff --git a/src/southbridge/sis/sis966/sis966_enable_usbdebug.c b/src/southbridge/sis/sis966/sis966_enable_usbdebug.c index c9d1c112e2..64aa7be277 100644 --- a/src/southbridge/sis/sis966/sis966_enable_usbdebug.c +++ b/src/southbridge/sis/sis966/sis966_enable_usbdebug.c @@ -21,32 +21,44 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +/* TODO: Check whether this actually works (might be copy-paste leftover). */ + +#include <stdint.h> +#include <usbdebug.h> +#include <device/pci_def.h> + #if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE - #define SIS966_DEVN_BASE CONFIG_HT_CHAIN_END_UNITID_BASE +#define SIS966_DEVN_BASE CONFIG_HT_CHAIN_END_UNITID_BASE #else - #define SIS966_DEVN_BASE CONFIG_HT_CHAIN_UNITID_BASE +#define SIS966_DEVN_BASE CONFIG_HT_CHAIN_UNITID_BASE #endif -#define EHCI_BAR_INDEX 0x10 -#define EHCI_BAR 0xFEF00000 +#define EHCI_BAR 0xFEF00000 /* EHCI BAR address */ +#define EHCI_BAR_INDEX 0x10 #define EHCI_DEBUG_OFFSET 0x98 -#include <usbdebug.h> - -void set_debug_port(unsigned port) +void set_debug_port(unsigned int port) { - uint32_t dword; - dword = pci_read_config32(PCI_DEV(0, SIS966_DEVN_BASE+2, 1), 0x74); - dword &= ~(0xf<<12); - dword |= (port<<12); - pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+2, 1), 0x74, dword); + u32 dword; + device_t dev = PCI_DEV(0, SIS966_DEVN_BASE + 2, 1); /* USB EHCI */ + /* Write the port number to 0x74[15:12]. */ + dword = pci_read_config32(dev, 0x74); + dword &= ~(0xf << 12); + dword |= (port << 12); + pci_write_config32(dev, 0x74, dword); } -static void sis966_enable_usbdebug(unsigned port) +static void sis966_enable_usbdebug(unsigned int port) { + device_t dev = PCI_DEV(0, SIS966_DEVN_BASE + 2, 1); /* USB EHCI */ + + /* Mark the requested physical USB port (1-15) as the Debug Port. */ set_debug_port(port); - pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+2, 1), EHCI_BAR_INDEX, EHCI_BAR); - pci_write_config8(PCI_DEV(0, SIS966_DEVN_BASE+2, 1), 0x04, 0x2); // mem space enabe -} + /* Set the EHCI BAR address. */ + pci_write_config32(dev, EHCI_BAR_INDEX, EHCI_BAR); + + /* Enable access to the EHCI memory space registers. */ + pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY); +} |