diff options
| -rw-r--r-- | src/mainboard/technologic/ts5300/Options.lb | 3 | ||||
| -rw-r--r-- | targets/Iwill/dk8s2/Config.lb | 80 | ||||
| -rw-r--r-- | targets/newisys/khepri/Config.lb | 67 | ||||
| -rw-r--r-- | targets/totalimpact/briq/Config.lb | 31 |
4 files changed, 14 insertions, 167 deletions
diff --git a/src/mainboard/technologic/ts5300/Options.lb b/src/mainboard/technologic/ts5300/Options.lb index 9756d21fe3..d7e36701c3 100644 --- a/src/mainboard/technologic/ts5300/Options.lb +++ b/src/mainboard/technologic/ts5300/Options.lb @@ -32,6 +32,9 @@ uses CROSS_COMPILE uses CC uses HOSTCC uses OBJCOPY +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_COMPRESS ## ROM_SIZE is the size of boot ROM that this board will use. default ROM_SIZE = 256*1024 diff --git a/targets/Iwill/dk8s2/Config.lb b/targets/Iwill/dk8s2/Config.lb index 1fcdcdbfb7..1cdd0d9839 100644 --- a/targets/Iwill/dk8s2/Config.lb +++ b/targets/Iwill/dk8s2/Config.lb @@ -2,86 +2,18 @@ # the Iwill DK8S2 # This will make a target directory of ./dk8s2 -loadoptions - target dk8s2 -uses ARCH -uses CONFIG_COMPRESS -uses CONFIG_IOAPIC -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses CONFIG_SMP -uses CONFIG_UDELAY_TSC -uses CPU_FIXUP -uses FALLBACK_SIZE -uses HAVE_FALLBACK_BOOT -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses i586 -uses i686 -uses INTEL_PPRO_MTRR -uses HEAP_SIZE -uses IRQ_SLOT_COUNT -uses k7 -uses k8 -uses MAINBOARD -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -#uses MEMORY_HOLE -uses PAYLOAD_SIZE -uses _RAMBASE -uses _ROMBASE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_OFFSET -uses ROM_SECTION_SIZE -uses ROM_SIZE -uses STACK_SIZE -uses USE_FALLBACK_IMAGE -uses USE_OPTION_TABLE -uses HAVE_OPTION_TABLE -uses CONFIG_CHIP_CONFIGURE - -uses CONFIG_CONSOLE_BTEXT -uses CONFIG_CONSOLE_SERIAL8250 -uses TTYS0_BAUD -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses DEBUG -uses CONFIG_MAX_CPUS -uses CONFIG_LOGICAL_CPUS -uses CONFIG_MAX_PHYSICAL_CPUS -uses LINUXBIOS_EXTRA_VERSION -uses XIP_ROM_SIZE -uses XIP_ROM_BASE - -uses HAVE_HARD_RESET - - -# -#uses CONFIG_LSI_SCSI_FW_FIXUP - +mainboard Iwill/DK8S2 option HAVE_HARD_RESET=1 option HAVE_OPTION_TABLE=1 option HAVE_MP_TABLE=1 -option CPU_FIXUP=1 -option CONFIG_UDELAY_TSC=0 -option i686=1 -option i586=1 -option INTEL_PPRO_MTRR=1 -option k7=1 -option k8=1 option ROM_SIZE=1048576 -option CONFIG_CONSOLE_BTEXT=1 - option HAVE_FALLBACK_BOOT=1 -# use the new chip configure code. - -option CONFIG_CHIP_CONFIGURE=1 #option CONFIG_LSI_SCSI_FW_FIXUP=1 @@ -98,7 +30,7 @@ option IRQ_SLOT_COUNT=12 ### option CONFIG_SMP=1 option CONFIG_MAX_CPUS=2 -option CONFIG_LOGICAL_CPUS=2 +#option CONFIG_LOGICAL_CPUS=2 option CONFIG_MAX_PHYSICAL_CPUS=2 # ### @@ -142,7 +74,7 @@ option ROM_IMAGE_SIZE=65536 ### ## We do use compressed image -option CONFIG_COMPRESS=1 +#option CONFIG_COMPRESS=1 option CONFIG_CONSOLE_SERIAL8250=1 option TTYS0_BAUD=115200 @@ -165,7 +97,7 @@ option DEFAULT_CONSOLE_LOGLEVEL=7 ## At a maximum only compile in this level of debugging option MAXIMUM_CONSOLE_LOGLEVEL=7 -option DEBUG=1 +#option DEBUG=1 # @@ -210,7 +142,6 @@ romimage "normal" option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE) - mainboard Iwill/DK8S2 payload /usr/src/filo-0.4.1_btext/filo.elf # payload /usr/src/filo-0.4.2/filo.elf end @@ -229,8 +160,7 @@ romimage "fallback" option XIP_ROM_SIZE = 65536 option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE) - mainboard Iwill/DK8S2 - payload /usr/src/filo-0.4.1_btext/filo.elf + payload ../../../payloads/filo.elf # payload /usr/src/filo-0.4.2/filo.elf end diff --git a/targets/newisys/khepri/Config.lb b/targets/newisys/khepri/Config.lb index bbc45c4741..c8d2949406 100644 --- a/targets/newisys/khepri/Config.lb +++ b/targets/newisys/khepri/Config.lb @@ -2,77 +2,20 @@ # Sample config file for Newisys Khepri systems # -loadoptions - # Target directory for khepri build target khepri - -# list of all used variables: -uses ARCH -uses CONFIG_COMPRESS -uses CONFIG_IOAPIC -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses CONFIG_UDELAY_TSC -uses CPU_FIXUP -uses FALLBACK_SIZE -uses HAVE_FALLBACK_BOOT -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses HAVE_HARD_RESET -uses i586 -uses i686 -uses INTEL_PPRO_MTRR -uses HEAP_SIZE -uses IRQ_SLOT_COUNT -uses k7 -uses k8 -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses CONFIG_SMP -uses CONFIG_MAX_CPUS -uses MEMORY_HOLE -uses PAYLOAD_SIZE -uses _RAMBASE -uses _ROMBASE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_OFFSET -uses ROM_SECTION_SIZE -uses ROM_SIZE -uses STACK_SIZE -uses USE_FALLBACK_IMAGE -uses USE_OPTION_TABLE -uses HAVE_OPTION_TABLE -uses MAXIMUM_CONSOLE_LOGLEVEL -uses DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_SERIAL8250 -uses MAINBOARD -uses CONFIG_CHIP_CONFIGURE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses LINUXBIOS_EXTRA_VERSION -uses CC + +mainboard newisys/khepri # set target C compiler to 32bit gcc. option CC="gcc -m32" # Configuration options. -option CONFIG_CHIP_CONFIGURE=1 - option MAXIMUM_CONSOLE_LOGLEVEL=8 option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 -option CPU_FIXUP=1 -option CONFIG_UDELAY_TSC=0 -option i686=1 -option i586=1 -option INTEL_PPRO_MTRR=1 -option k7=1 -option k8=1 - - # Size of the image. Khepri comes with 512k per default. option ROM_SIZE=524288 @@ -89,16 +32,14 @@ romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION="-Khepri-Normal" - mainboard newisys/khepri - payload /usr/share/LinuxBIOS/tg3--ide_disk.zelf + payload ../../../payloads/tg3--ide_disk.zelf end romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION="-Khepri-Fallback" - mainboard newisys/khepri - payload /usr/share/LinuxBIOS/tg3--ide_disk.zelf + payload ../../../payloads/tg3--ide_disk.zelf end buildrom ./khepri.rom ROM_SIZE "normal" "fallback" diff --git a/targets/totalimpact/briq/Config.lb b/targets/totalimpact/briq/Config.lb index 292fbc6427..5933e1a890 100644 --- a/targets/totalimpact/briq/Config.lb +++ b/targets/totalimpact/briq/Config.lb @@ -1,35 +1,9 @@ # Config file for the Total Impact briQ # This will make a target directory of ./briq -loadoptions - target briq - -uses CROSS_COMPILE -uses HAVE_OPTION_TABLE -uses CONFIG_COMPRESS -uses DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_USE_INIT -uses NO_POST -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_IDE_STREAM -uses IDE_BOOT_DRIVE -uses IDE_SWAB IDE_OFFSET -uses ROM_SIZE -uses _RESET -uses _EXCEPTION_VECTORS -uses _ROMBASE -uses _ROMSTART -uses _RAMBASE -uses _RAMSTART -uses STACK_SIZE -uses HEAP_SIZE -uses CONFIG_BRIQ_750FX -uses CONFIG_BRIQ_7400 - -## use a cross compiler -#option CROSS_COMPILE="powerpc-eabi-" -#option CROSS_COMPILE="ppc_74xx-" + +mainboard totalimpact/briq ## Use stage 1 initialization code option CONFIG_USE_INIT=1 @@ -79,7 +53,6 @@ romimage "normal" option CONFIG_BRIQ_750FX=1 #option CONFIG_BRIQ_7400=1 - mainboard totalimpact/briq end buildrom ./linuxbios.rom ROM_SIZE "normal" |