diff options
71 files changed, 0 insertions, 8307 deletions
diff --git a/src/mainboard/amd/quartet/Config.lb b/src/mainboard/amd/quartet/Config.lb deleted file mode 100644 index 9233460965..0000000000 --- a/src/mainboard/amd/quartet/Config.lb +++ /dev/null @@ -1,239 +0,0 @@ -## -## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end - -## -## Compute the start location and size size of -## The linuxBIOS bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of linuxBIOS will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up linuxBIOS, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=65536 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end -#object reset.o - -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end - -## -## Build our 16 bit and 32 bit linuxBIOS entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where linuxBIOS is entered) -## -if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -### -### This is the early phase of linuxBIOS startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc - -## -## Include the secondary Configuration files -## -dir /pc80 -config chip.h - -chip northbridge/amd/amdk8/root_complex - device pci_domain 0 on - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on - chip southbridge/amd/amd8111 - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 on end - device pci 1.0 on end - end - device pci 1.0 on - chip superio/nsc/pc87360 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.7 off end # GPIO - device pnp 2e.8 off end # ACB - device pnp 2e.9 off end # FSCM - device pnp 2e.a off end # WDT - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on end - device pci 1.5 on end - device pci 1.6 on end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end # 8111 - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - chip northbridge/amd/amdk8 # mc1 - device pci 19.0 on end - device pci 19.0 on - chip southbridge/amd/amd8131 # amd8131_0 - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - chip southbridge/amd/amd8131 # amd8131_1 - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - end - device pci 19.0 on end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - end - - chip northbridge/amd/amdk8 # mc2 - device pci 1a.0 on end - device pci 1a.0 on end - device pci 1a.0 on end - device pci 1a.1 on end - device pci 1a.2 on end - device pci 1a.3 on end - end - - chip northbridge/amd/amdk8 # mc3 - device pci 1b.0 on end - device pci 1b.0 on end - device pci 1b.0 on end - device pci 1b.1 on end - device pci 1b.2 on end - device pci 1b.3 on end - end - end # pci_domain 0 - device apic_cluster 0 on - chip cpu/amd/socket_940 - device apic 0 on end - end - chip cpu/amd/socket_940 - device apic 1 on end - end - chip cpu/amd/socket_940 - device apic 2 on end - end - chip cpu/amd/socket_940 - device apic 3 on end - end - end -end - diff --git a/src/mainboard/amd/quartet/Options.lb b/src/mainboard/amd/quartet/Options.lb deleted file mode 100644 index 78b3dfbd00..0000000000 --- a/src/mainboard/amd/quartet/Options.lb +++ /dev/null @@ -1,207 +0,0 @@ -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_MAX_PHYSICAL_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_ROM_PAYLOAD_START -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses LINUXBIOS_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_SERIAL8250 -uses CROSS_COMPILE -uses CC -uses HOSTCC -uses OBJCOPY - -uses CONFIG_USE_INIT - - -### -### Build options -### - -## -## ROM_SIZE is the size of boot ROM that this board will use. -## -default ROM_SIZE=524288 - -## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use -## -default FALLBACK_SIZE=0x40000 - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=9 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default HAVE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=1 - -## -## Move the default LinuxBIOS cmos range off of AMD RTC registers -## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=4 -default CONFIG_MAX_PHYSICAL_CPUS=4 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default MAINBOARD_PART_NUMBER="QUARTET" -default MAINBOARD_VENDOR="AMD" - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE - -## -## LinuxBIOS C code runs at this location in RAM -## -default _RAMBASE=0x00004000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD = 1 - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 - -# Select the serial console base port -default TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 - -## -### Select the linuxBIOS loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 - -## -## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -### End Options.lb -end diff --git a/src/mainboard/amd/quartet/auto.c b/src/mainboard/amd/quartet/auto.c deleted file mode 100644 index 4e5eb596c0..0000000000 --- a/src/mainboard/amd/quartet/auto.c +++ /dev/null @@ -1,258 +0,0 @@ -#define ASSEMBLY 1 -//#define MAXIMUM_CONSOLE_LOGLEVEL 9 -//#define DEFAULT_CONSOLE_LOGLEVEL 9 - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <arch/cpu.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <cpu/amd/model_fxx_rev.h> -#include "superio/nsc/pc87360/pc87360_early_serial.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" - -#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) - -static void hard_reset(void) -{ - set_bios_reset(); - /* enable cf9 */ - pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); - /* reset */ - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - set_bios_reset(); - pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); -} - -/* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low */ - outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | - (0 << 0), SMBUS_IO_BASE + 0xc0 + 28); - /* Ensure the BIOS has control of the memory lines */ - outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | - (0 << 0), SMBUS_IO_BASE + 0xc0 + 29); - } else { - /* Ensure the CPU has controll of the memory lines */ - outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | - (1 << 0), SMBUS_IO_BASE + 0xc0 + 29); - } -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset_high */ - outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | - (1 << 0), SMBUS_IO_BASE + 0xc0 + 28); - udelay(90); - } -} - -/* - * generate_row is specific to board implementation - * - */ - -static unsigned int generate_row(uint8_t node, uint8_t row, - uint8_t maxnodes) -{ - /* Routing Table Node i - * - * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c - * i: 0, 1, 2, 3, 4, 5, 6, 7 - * - * [ 0: 3] Request Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [11: 8] Response Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [19:16] Broadcast route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - */ - - uint32_t ret = 0x00010101; /* default row entry */ -/* - static const unsigned int rows_2p[2][2] = { - {0x00030101, 0x00010202}, - {0x00010202, 0x00030101} - }; -*/ - - static const unsigned int rows_4p[4][4] = { - {0x00070101, 0x00010202, 0x00030404, 0x00010204}, - {0x00010202, 0x000b0101, 0x00010208, 0x00030808}, - {0x00030808, 0x00010208, 0x000b0101, 0x00010202}, - {0x00010204, 0x00030404, 0x00010202, 0x00070101} - }; - - if (!(node >= maxnodes || row >= maxnodes)) { -/* - if (maxnodes == 2) - ret = rows_2p[node][row]; - if (maxnodes == 4) -*/ - ret = rows_4p[node][row]; - } - - return ret; -} - - -#if ( FAKE_SPDROM != 1 ) -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_HUB 0x18 - unsigned device = (ctrl->channel0[0]) >> 8; - smbus_write_byte(SMBUS_HUB, 0x01, device); - smbus_write_byte(SMBUS_HUB, 0x03, 0); -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device & 0xff, address); -} -#else -#include "fakespd.c" -#endif - -// #include "northbridge/amd/amdk8/setup_resource_map.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "cpu/amd/dualcore/dualcore.c" - -#include "sdram/generic_sdram.c" -/* quartet does not want the default */ -#include "resourcemap.c" - -#define RC0 ((1<<1)<<8) -#define RC1 ((1<<2)<<8) -#define RC2 ((1<<3)<<8) -#define RC3 ((1<<4)<<8) - -#define DIMM0 0x50 -#define DIMM1 0x51 -#define DIMM2 0x52 -#define DIMM3 0x53 - -static void main(unsigned long bist) -{ - static const struct mem_controller cpu[] = { - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = {RC0 | DIMM0, RC0 | DIMM2, 0, 0}, - .channel1 = {RC0 | DIMM1, RC0 | DIMM3, 0, 0}, - }, - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = {RC1 | DIMM0, RC1 | DIMM2, 0, 0}, - .channel1 = {RC1 | DIMM1, RC1 | DIMM3, 0, 0}, - }, - { - .node_id = 2, - .f0 = PCI_DEV(0, 0x1a, 0), - .f1 = PCI_DEV(0, 0x1a, 1), - .f2 = PCI_DEV(0, 0x1a, 2), - .f3 = PCI_DEV(0, 0x1a, 3), - .channel0 = {RC2 | DIMM0, RC2 | DIMM2, 0, 0}, - .channel1 = {RC2 | DIMM1, RC2 | DIMM3, 0, 0}, - }, - { - .node_id = 3, - .f0 = PCI_DEV(0, 0x1b, 0), - .f1 = PCI_DEV(0, 0x1b, 1), - .f2 = PCI_DEV(0, 0x1b, 2), - .f3 = PCI_DEV(0, 0x1b, 3), - .channel0 = {RC3 | DIMM0, RC3 | DIMM2, 0, 0}, - .channel1 = {RC3 | DIMM1, RC3 | DIMM3, 0, 0}, - } - }; - - int needs_reset; - unsigned nodeid; - - if (bist == 0) { - k8_init_and_stop_secondaries(); - } - /* Setup the console */ - pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_quartet_resource_map(); - needs_reset = setup_coherent_ht_domain(); -#if 0 - needs_reset |= ht_setup_chains(2); -#else - needs_reset |= ht_setup_chains_x(); -#endif - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } -#if 0 - print_pci_devices(); -#endif - enable_smbus(); -#if 0 - dump_spd_registers(&cpu[0]); -#endif - memreset_setup(); - sdram_initialize(sizeof(cpu) / sizeof(cpu[0]), cpu); - -#if 0 - dump_pci_devices(); -#endif -#if 0 - dump_pci_device(PCI_DEV(0, 0x18, 2)); -#endif -#if 0 - /* Check the first 1M */ - ram_check(0x00000000, 0x000100000); -#endif -} diff --git a/src/mainboard/amd/quartet/chip.h b/src/mainboard/amd/quartet/chip.h deleted file mode 100644 index 59c2edff48..0000000000 --- a/src/mainboard/amd/quartet/chip.h +++ /dev/null @@ -1,5 +0,0 @@ -extern struct chip_operations mainboard_amd_quartet_ops; - -struct mainboard_amd_quartet_config { - int nothing; -}; diff --git a/src/mainboard/amd/quartet/cmos.layout b/src/mainboard/amd/quartet/cmos.layout deleted file mode 100644 index 5eb88b9a5a..0000000000 --- a/src/mainboard/amd/quartet/cmos.layout +++ /dev/null @@ -1,98 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 dual_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 reserved_memory - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 - - diff --git a/src/mainboard/amd/quartet/failover.c b/src/mainboard/amd/quartet/failover.c deleted file mode 100644 index 1738e908d9..0000000000 --- a/src/mainboard/amd/quartet/failover.c +++ /dev/null @@ -1,68 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "northbridge/amd/amdk8/reset_test.c" - -static unsigned long main(unsigned long bist) -{ - unsigned nodeid; - - /* Make cerain my local apic is useable */ - enable_lapic(); - - nodeid = lapicid() & 0xf; - - /* Is this a cpu only reset? */ - if (early_mtrr_init_detected()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* Setup the 8111 */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -} diff --git a/src/mainboard/amd/quartet/fakespd.c b/src/mainboard/amd/quartet/fakespd.c deleted file mode 100644 index 0bbdc59dfd..0000000000 --- a/src/mainboard/amd/quartet/fakespd.c +++ /dev/null @@ -1,62 +0,0 @@ - -#define RC0 ((1<<0)<<8) -#define RC1 ((1<<1)<<8) -#define RC2 ((1<<2)<<8) -#define RC3 ((1<<3)<<8) - -#define DIMM0 0xa0 -#define DIMM1 0xa2 -#define DIMM2 0xa4 -#define DIMM3 0xa8 - - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* dummy */ -} - - -/* - * This function is dedicated to Daniele Frijia <realcosmo@spd-online.de> - */ - -static int spd_read_byte(unsigned device, unsigned address) -{ - static const unsigned char infinion_512mb_pc2700[0x80] = { - 0x80, 0x08, 0x07, 0x0d, 0x0b, 0x01, 0x48, 0x00, - 0x04, 0x60, 0x70, 0x02, 0x82, 0x04, 0x04, 0x01, - 0x0e, 0x04, 0x0c, 0x01, 0x02, 0x26, 0xc0, 0x75, - 0x70, 0x00, 0x00, 0x48, 0x30, 0x48, 0x2a, 0x80, - 0x75, 0x75, 0x45, 0x45, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x3c, 0x48, 0x30, 0x28, 0x50, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, - 0xc1, 0x49, 0x4e, 0x46, 0x49, 0x4e, 0x45, 0x4f, - 0x53, 0x37, 0x32, 0x44, 0x36, 0x34, 0x33, 0x30, - 0x30, 0x47, 0x42, 0x52, 0x36, 0x42, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x02, 0x0a, 0x03, 0x21, 0x0d, - 0x3d, 0x89, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 - }; - - if (address >= 0x80) - return -1; - - /* This code is AMD quartet specific. - * DIMM0 and DIMM1 are defines of the original smbus device - * numbers on the quartet. We read them here to see which - * spd rom we should fake. - * Below construct assumes that the first two dimm sockets - * of each cpu hold a 512MB Infinion PC2700 CL2.5 ECC registered - * ddr ram module. - */ - - device &= 0xff; - if (device == DIMM0 || device == DIMM1) { - return infinion_512mb_pc2700[address]; - } - - return -1; -} diff --git a/src/mainboard/amd/quartet/irq_tables.c b/src/mainboard/amd/quartet/irq_tables.c deleted file mode 100644 index 5b9c9fabc4..0000000000 --- a/src/mainboard/amd/quartet/irq_tables.c +++ /dev/null @@ -1,38 +0,0 @@ -#include <arch/pirq_routing.h> - -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*9, /* there can be total 9 devices on the bus */ - 1, /* Where the interrupt router lies (bus) */ - (4<<3)|3, /* Where the interrupt router lies (dev) */ - 0x0, /* IRQs devoted exclusively to PCI usage */ - 0x1022, /* Vendor */ - 0x746b, /* Device */ - 0, /* Crap (miniport) */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xb0, /* u8 checksum , mod 256 checksum must give zero */ - { /* bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - /* PCI Slot 1 */ - {0x03, (0x01<<3)|0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}}, 0x01, 0}, - /* PCI Slot 2 */ - {0x03, (0x02<<3)|0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}}, 0x02, 0}, - /* PCI Slot 3 */ - {0x02, (0x01<<3)|0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}}, 0x03, 0}, - /* PCI Slot 4 */ - {0x02, (0x02<<3)|0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}}, 0x04, 0}, - /* PCI Slot 5 */ - {0x04, (0x05<<3)|0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}}, 0x05, 0}, - /* PCI Slot 6 */ - {0x04, (0x04<<3)|0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}}, 0x06, 0}, - /* Onboard NICS */ - {0x02, (0x03<<3)|0, {{0x04, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x00, 0}, - {0x02, (0x04<<3)|0, {{0x04, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x00, 0}, - /* Let Linux know about bus 1 */ - {0x01, (0x04<<3)|3, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x00, 0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr); -} diff --git a/src/mainboard/amd/quartet/mainboard.c b/src/mainboard/amd/quartet/mainboard.c deleted file mode 100644 index d3bfb13308..0000000000 --- a/src/mainboard/amd/quartet/mainboard.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <device/device.h> -#include "chip.h" - -struct chip_operations mainboard_amd_quartet_ops = { - CHIP_NAME("AMD Quartet Mainboard") -}; - diff --git a/src/mainboard/amd/quartet/mptable.c b/src/mainboard/amd/quartet/mptable.c deleted file mode 100644 index 9d3ea13127..0000000000 --- a/src/mainboard/amd/quartet/mptable.c +++ /dev/null @@ -1,232 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -void *smp_write_config_table(void *v) -{ - static const char sig[4] = "PCMP"; - static const char oem[8] = "AMD "; - static const char productid[12] = "QUARTET "; - struct mp_config_table *mc; - unsigned char bus_num; - unsigned char bus_isa; - unsigned char bus_8131_1; - unsigned char bus_8131_2; - unsigned char bus_8111_1; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - memset(mc, 0, sizeof(*mc)); - - memcpy(mc->mpc_signature, sig, sizeof(sig)); - mc->mpc_length = sizeof(*mc); /* initially just the header */ - mc->mpc_spec = 0x04; - mc->mpc_checksum = 0; /* not yet computed */ - memcpy(mc->mpc_oem, oem, sizeof(oem)); - memcpy(mc->mpc_productid, productid, sizeof(productid)); - mc->mpc_oemptr = 0; - mc->mpc_oemsize = 0; - mc->mpc_entry_count = 0; /* No entries yet... */ - mc->mpc_lapic = LAPIC_ADDR; - mc->mpe_length = 0; - mc->mpe_checksum = 0; - mc->reserved = 0; - - smp_write_processors(mc); - - { - device_t dev; - - /* 8111 */ - dev = dev_find_slot(1, PCI_DEVFN(0x03,0)); - if (dev) { - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); - - bus_8111_1 = 4; - bus_isa = 5; - } - /* 8131-1 */ - dev = dev_find_slot(1, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); - - bus_8131_1 = 2; - } - /* 8131-2 */ - dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); - - bus_8131_2 = 3; - } - } - - /* define bus and isa numbers */ - for(bus_num = 0; bus_num < bus_isa; bus_num++) { - smp_write_bus(mc, bus_num, "PCI "); - } - smp_write_bus(mc, bus_isa, "ISA "); - - /* IOAPIC handling */ - smp_write_ioapic(mc, 2, 0x11, 0xfec00000); - { - device_t dev; - struct resource *res; - /* 8131 apic 3 */ - dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x03, 0x11, res->base); - } - } - /* 8131 apic 4 */ - dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x04, 0x11, res->base); - } - } - } - - /* ISA backward compatibility interrupts */ - smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x00, 0x02, 0x00); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x01, 0x02, 0x01); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x00, 0x02, 0x02); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x03, 0x02, 0x03); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x04, 0x02, 0x04); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x05, 0x02, 0x05); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x06, 0x02, 0x06); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x07, 0x02, 0x07); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x08, 0x02, 0x08); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x09, 0x02, 0x09); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x0a, 0x02, 0x0a); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x0b, 0x02, 0x0b); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x0c, 0x02, 0x0c); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x0d, 0x02, 0x0d); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x0e, 0x02, 0x0e); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x0f, 0x02, 0x0f); - - /* Standard local interrupt assignments */ - smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x00, MP_APIC_ALL, 0x00); - smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x00, MP_APIC_ALL, 0x01); - - - /* PCI Slot 1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (1<<2)|0, 0x02, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (1<<2)|1, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (1<<2)|2, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (1<<2)|3, 0x02, 0x10); - - /* PCI Slot 2 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (2<<2)|0, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (2<<2)|1, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (2<<2)|2, 0x02, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_2, (2<<2)|3, 0x02, 0x11); - - /* PCI Slot 3 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (1<<2)|0, 0x02, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (1<<2)|1, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (1<<2)|2, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (1<<2)|3, 0x02, 0x10); - - /* PCI Slot 4 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (2<<2)|0, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (2<<2)|1, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (2<<2)|2, 0x02, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (2<<2)|3, 0x02, 0x11); - - /* PCI Slot 5 */ -#warning "FIXME get the irqs right, it's just hacked to work for now" - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (5<<2)|0, 0x02, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (5<<2)|1, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (5<<2)|2, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (5<<2)|3, 0x02, 0x10); - - /* PCI Slot 6 */ -#warning "FIXME get the irqs right, it's just hacked to work for now" - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (4<<2)|0, 0x02, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (4<<2)|1, 0x02, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (4<<2)|2, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (4<<2)|3, 0x02, 0x13); - - /* On board nics */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (3<<2)|0, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_8131_1, (4<<2)|0, 0x02, 0x13); - - /* There is no extension information... */ - - /* Compute the checksums */ - mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); - mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", - mc, smp_next_mpe_entry(mc)); - return smp_next_mpe_entry(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr); - return (unsigned long)smp_write_config_table(v); -} - diff --git a/src/mainboard/amd/quartet/reset.c b/src/mainboard/amd/quartet/reset.c deleted file mode 100644 index 63958185f6..0000000000 --- a/src/mainboard/amd/quartet/reset.c +++ /dev/null @@ -1,6 +0,0 @@ -#include "../../../southbridge/amd/amd8111/amd8111_reset.c" - -void hard_reset(void) -{ - amd8111_hard_reset(0, 2); -} diff --git a/src/mainboard/amd/quartet/resourcemap.c b/src/mainboard/amd/quartet/resourcemap.c deleted file mode 100644 index f34e6f5327..0000000000 --- a/src/mainboard/amd/quartet/resourcemap.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * QUARTET needs a different default resource map. - * - */ - - -static void setup_quartet_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x000f0000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x001f0001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x002f0002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x003f0003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00100003, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200003, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00300003, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00ee1f20, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00f10f11, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00fbff11, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00fec020, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000b20, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00fed020, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00000000, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00ec0003, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00ee2003, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00f40003, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00fec003, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000a03, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00fed003, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00000000, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00002020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00005011, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00003003, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000203, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0xff080113, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0xffff0040, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0xffff0270, - }; - int max; - max = sizeof(register_values)/sizeof(register_values[0]); - setup_resource_map(register_values, max); -} - diff --git a/src/mainboard/amd/serenade/Config.lb b/src/mainboard/amd/serenade/Config.lb deleted file mode 100644 index c1f233d7a0..0000000000 --- a/src/mainboard/amd/serenade/Config.lb +++ /dev/null @@ -1,215 +0,0 @@ -## -## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end - -## -## Compute the start location and size size of -## The linuxBIOS bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of linuxBIOS will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up linuxBIOS, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=65536 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end -#object reset.o - -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end - -## -## Build our 16 bit and 32 bit linuxBIOS entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where linuxBIOS is entered) -## -if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -### -### This is the early phase of linuxBIOS startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc - -## -## Include the secondary Configuration files -## -dir /pc80 -config chip.h - -chip northbridge/amd/amdk8/root_complex - device pci_domain 0 on - chip northbridge/amd/amdk8 # mc - device pci 18.0 on end # LDT 0 - device pci 18.0 on end # LDT1 - device pci 18.0 on # LDT2 - chip southbridge/amd/amd8131 - # the on/off keyword is mandatory - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 on end - device pci 1.0 off end - end - device pci 1.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAM_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - end - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on end - device pci 1.5 off end - device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - chip northbridge/amd/amdk8 - device pci 19.0 on end - device pci 19.0 on end - device pci 19.0 on end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - end - end - device apic_cluster 0 on - chip cpu/amd/socket_940 - device apic 0 on end - end - chip cpu/amd/socket_940 - device apic 1 on end - end - end -end - diff --git a/src/mainboard/amd/serenade/Options.lb b/src/mainboard/amd/serenade/Options.lb deleted file mode 100644 index 20e2615d2e..0000000000 --- a/src/mainboard/amd/serenade/Options.lb +++ /dev/null @@ -1,206 +0,0 @@ -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_MAX_PHYSICAL_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_ROM_PAYLOAD_START -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses LINUXBIOS_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_SERIAL8250 -uses CROSS_COMPILE -uses CC -uses HOSTCC -uses OBJCOPY - -uses CONFIG_USE_INIT - -### -### Build options -### - -## -## ROM_SIZE is the size of boot ROM that this board will use. -## -default ROM_SIZE=524288 - -## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use -## -default FALLBACK_SIZE=0x40000 - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=9 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default HAVE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=1 - -## -## Move the default LinuxBIOS cmos range off of AMD RTC registers -## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=2 -default CONFIG_MAX_PHYSICAL_CPUS=2 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default MAINBOARD_PART_NUMBER="SERENADE" -default MAINBOARD_VENDOR="AMD" - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE - -## -## LinuxBIOS C code runs at this location in RAM -## -default _RAMBASE=0x00004000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD = 1 - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 - -# Select the serial console base port -default TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 - -## -### Select the linuxBIOS loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 - -## -## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -### End Options.lb -end diff --git a/src/mainboard/amd/serenade/auto.c b/src/mainboard/amd/serenade/auto.c deleted file mode 100644 index 72b064878a..0000000000 --- a/src/mainboard/amd/serenade/auto.c +++ /dev/null @@ -1,218 +0,0 @@ -#define ASSEMBLY 1 -#define DEFAULT_CONSOLE_LOGLEVEL 8 -#define MAXIMUM_CONSOLE_LOGLEVEL 8 -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <arch/cpu.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <cpu/amd/model_fxx_rev.h> -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static void hard_reset(void) -{ - set_bios_reset(); - - /* enable cf9 */ - pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); - /* reset */ - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - set_bios_reset(); - pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); -} - -/* - * GPIO16 of 8111 will control H0_MEMRESET_L - * GPIO17 of 8111 will control H1_MEMRESET_L - */ -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); - /* Ensure the BIOS has control of the memory lines */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); - } else { - /* Ensure the CPU has controll of the memory lines */ - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); - } -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset_high */ - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); - udelay(90); - } -} - -static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) -{ - /* Routing Table Node i - * - * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c - * i: 0, 1, 2, 3, 4, 5, 6, 7 - * - * [ 0: 3] Request Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [11: 8] Response Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [19:16] Broadcast route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - */ - - uint32_t ret = 0x00010101; /* default row entry */ - - /* CPU0 LDT0 <-> LDT0 CPU1 */ - static const unsigned int rows_2p[2][2] = { - { 0x00030101, 0x00010202 }, - { 0x00010202, 0x00030101 } - }; - - if (maxnodes > 2) { - print_debug("this mainboard is only designed for 2 cpus\r\n"); - maxnodes = 2; - } - - if (!(node >= maxnodes || row >= maxnodes)) { - ret = rows_2p[node][row]; - } - - return ret; -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "sdram/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) -static void main(unsigned long bist) -{ - static const struct mem_controller cpu[] = { -#if FIRST_CPU - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, - .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, - }, -#endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, - .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, - }, -#endif - }; - - int needs_reset; - unsigned nodeid; - if (bist == 0) { - k8_init_and_stop_secondaries(); - } - /* Setup the console */ - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - -#if 0 - print_pci_devices(); -#endif - - setup_amd_serenade_resource_map(); - needs_reset = setup_coherent_ht_domain(); - /* non-coherent HT is on LDT2 */ - needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xC0); - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - -#if 1 - print_pci_devices(); -#endif - - enable_smbus(); - -#if 0 - dump_spd_registers(&cpu[0]); -#endif - - memreset_setup(); - sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); - -#if 0 - dump_pci_devices(); -#endif - - print_pci_devices(); - -#if 0 - dump_pci_device(PCI_DEV(0, 0x18, 2)); -#endif - -#if 0 - /* Check the first 1M */ - ram_check(0x00000000, 0x001000000); -#endif - -} diff --git a/src/mainboard/amd/serenade/chip.h b/src/mainboard/amd/serenade/chip.h deleted file mode 100644 index 9f244772d0..0000000000 --- a/src/mainboard/amd/serenade/chip.h +++ /dev/null @@ -1,5 +0,0 @@ -extern struct chip_operations mainboard_amd_serenade_ops; - -struct mainboard_amd_serenade_config { - int nothing; -}; diff --git a/src/mainboard/amd/serenade/cmos.layout b/src/mainboard/amd/serenade/cmos.layout deleted file mode 100644 index 5eb88b9a5a..0000000000 --- a/src/mainboard/amd/serenade/cmos.layout +++ /dev/null @@ -1,98 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 dual_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 reserved_memory - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 - - diff --git a/src/mainboard/amd/serenade/failover.c b/src/mainboard/amd/serenade/failover.c deleted file mode 100644 index 1738e908d9..0000000000 --- a/src/mainboard/amd/serenade/failover.c +++ /dev/null @@ -1,68 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "northbridge/amd/amdk8/reset_test.c" - -static unsigned long main(unsigned long bist) -{ - unsigned nodeid; - - /* Make cerain my local apic is useable */ - enable_lapic(); - - nodeid = lapicid() & 0xf; - - /* Is this a cpu only reset? */ - if (early_mtrr_init_detected()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* Setup the 8111 */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -} diff --git a/src/mainboard/amd/serenade/irq_tables.c b/src/mainboard/amd/serenade/irq_tables.c deleted file mode 100644 index f340a2d31e..0000000000 --- a/src/mainboard/amd/serenade/irq_tables.c +++ /dev/null @@ -1,61 +0,0 @@ -#include <arch/pirq_routing.h> -#include <device/pci.h> - -#define IRQ_SLOT_COUNT 12 -#define IRQ_ROUTER_BUS 0 -#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3) -#define IRQ_ROUTER_VENDOR 0x1022 -#define IRQ_ROUTER_DEVICE 0x746b - -#define AVAILABLE_IRQS 0xdef8 -#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \ - { bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \ - {linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0} - -/* Each IRQ_SLOT entry consists of: - * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu - */ - -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*IRQ_SLOT_COUNT, /* there can be total IRQ_SLOT_COUNT table entries */ - IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */ - IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - IRQ_ROUTER_VENDOR, /* Vendor */ - IRQ_ROUTER_DEVICE, /* Device */ - 0x00, /* Crap (miniport) */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x34, /* u8 checksum , mod 256 checksum must give zero */ - { /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */ - /* Northbridge, Node 0 */ - IRQ_SLOT(0x0, 0x00,0x18,0x0, 0,0,0,0), - /* AMD-8131 PCI-X Bridge */ - IRQ_SLOT(0x0, 0x01,0x01,0x0, 0,0,0,0), - /* Onboard LSI SCSI Controller */ - IRQ_SLOT(0x0, 0x02,0x02,0x0, 3,0,0,0), - /* Onboard Broadcom NICs */ - IRQ_SLOT(0x0, 0x02,0x01,0x0, 1,2,0,0), - /* AMD-8131 PCI-X Bridge */ - IRQ_SLOT(0x0, 0x01,0x02,0x0, 0,0,0,0), - /* PCI Slot 1-2 */ - IRQ_SLOT(0x1, 0x03,0x03,0x0, 1,2,3,4), - IRQ_SLOT(0x2, 0x03,0x04,0x0, 2,3,4,1), - /* AMD-8111 PCI Bridge */ - IRQ_SLOT(0x0, 0x01,0x03,0x0, 0,0,0,0), - /* USB Controller */ - IRQ_SLOT(0x0, 0x04,0x00,0x0, 0,0,0,4), - /* ATI Rage XL VGA */ - IRQ_SLOT(0x0, 0x04,0x05,0x0, 1,0,0,0), - /* AMD-8111 LPC Dridge */ - IRQ_SLOT(0x0, 0x01,0x04,0x0, 0,0,0,0), - /* Northbridge, Node 1 */ - IRQ_SLOT(0x0, 0x00,0x19,0x0, 0,0,0,0), - - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr); -} diff --git a/src/mainboard/amd/serenade/mainboard.c b/src/mainboard/amd/serenade/mainboard.c deleted file mode 100644 index d0c911272d..0000000000 --- a/src/mainboard/amd/serenade/mainboard.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <device/device.h> -#include "chip.h" - -struct chip_operations mainboard_amd_serenade_ops = { - CHIP_NAME("AMD Serenade Mainboard") -}; - diff --git a/src/mainboard/amd/serenade/mptable.c b/src/mainboard/amd/serenade/mptable.c deleted file mode 100644 index b00eb2b082..0000000000 --- a/src/mainboard/amd/serenade/mptable.c +++ /dev/null @@ -1,175 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -void *smp_write_config_table(void *v) -{ - static const char sig[4] = "PCMP"; - static const char oem[8] = "AMD "; - static const char productid[12] = "Serenade "; - struct mp_config_table *mc; - - unsigned char bus_num; - unsigned char bus_isa; - unsigned char bus_8111_0; - unsigned char bus_8111_1; - unsigned char bus_8131_1; - unsigned char bus_8131_2; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - memset(mc, 0, sizeof(*mc)); - - memcpy(mc->mpc_signature, sig, sizeof(sig)); - mc->mpc_length = sizeof(*mc); /* initially just the header */ - mc->mpc_spec = 0x04; - mc->mpc_checksum = 0; /* not yet computed */ - memcpy(mc->mpc_oem, oem, sizeof(oem)); - memcpy(mc->mpc_productid, productid, sizeof(productid)); - mc->mpc_oemptr = 0; - mc->mpc_oemsize = 0; - mc->mpc_entry_count = 0; /* No entries yet... */ - mc->mpc_lapic = LAPIC_ADDR; - mc->mpe_length = 0; - mc->mpe_checksum = 0; - mc->reserved = 0; - - smp_write_processors(mc); - - { - device_t dev; - - /* 8111 */ - dev = dev_find_slot(1, PCI_DEVFN(0x03,0)); - if (dev) { - bus_8111_0 = pci_read_config8(dev, PCI_PRIMARY_BUS); - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); - bus_8111_1 = 4; - bus_isa = 5; - } - - /* 8131-1 */ - dev = dev_find_slot(1, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); - bus_8131_1 = 2; - } - - /* 8131-2 */ - dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); - bus_8131_2 = 3; - } - } - - /* define bus and isa numbers */ - for (bus_num = 0; bus_num < bus_isa; bus_num++) { - smp_write_bus(mc, bus_num, "PCI "); - } - smp_write_bus(mc, bus_isa, "ISA "); - - /* Legacy IOAPIC #2 */ - smp_write_ioapic(mc, 2, 0x11, 0xfec00000); - { - device_t dev; - struct resource *res; - /* 8131-1 apic #3 */ - dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x03, 0x11, res->base); - } - } - /* 8131-2 apic #4 */ - dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x04, 0x11, res->base); - } - } - } - - /* ISA backward compatibility interrupts */ - smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, 0x02, 0x00); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x01, 0x02, 0x01); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, 0x02, 0x02); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x03, 0x02, 0x03); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x04, 0x02, 0x04); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x05, 0x02, 0x05); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x06, 0x02, 0x06); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x07, 0x02, 0x07); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x08, 0x02, 0x08); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x09, 0x02, 0x09); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0a, 0x02, 0x0a); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0b, 0x02, 0x0b); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0c, 0x02, 0x0c); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0d, 0x02, 0x0d); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0e, 0x02, 0x0e); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0f, 0x02, 0x0f); - - /* PCI Ints: Type Polarity Trigger Bus ID PCIDEVNUM|IRQ APIC ID PIN# */ - /* Integrated SMBus 2.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|3, 0x2, 0x13); - /* Integrated AMD AC97 Audio */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|1, 0x2, 0x11); - - /* Integrated AMD USB */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x00<<2)|3, 0x2, 0x13); - - /* On board ATI Rage XL */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x05<<2)|0, 0x2, 0x10); - - /* On board Broadcom nics */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|0, 0x3, 0x00); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|1, 0x3, 0x01); - - /* On board LSI SCSI */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x02<<2)|0, 0x3, 0x02); - - /* PCI Slot 1 PCIX */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|0, 0x2, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|1, 0x2, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|2, 0x2, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|3, 0x2, 0x13); - - /* PCI Slot 2 PCIX */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|0, 0x2, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|1, 0x2, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|2, 0x2, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|3, 0x2, 0x10); - - /* Standard local interrupt assignments: - * Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, MP_APIC_ALL, 0x00); - smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, MP_APIC_ALL, 0x01); - - /* There is no extension information... */ - - /* Compute the checksums */ - mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); - mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", - mc, smp_next_mpe_entry(mc)); - return smp_next_mpe_entry(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr); - return (unsigned long)smp_write_config_table(v); -} - diff --git a/src/mainboard/amd/serenade/reset.c b/src/mainboard/amd/serenade/reset.c deleted file mode 100644 index 63958185f6..0000000000 --- a/src/mainboard/amd/serenade/reset.c +++ /dev/null @@ -1,6 +0,0 @@ -#include "../../../southbridge/amd/amd8111/amd8111_reset.c" - -void hard_reset(void) -{ - amd8111_hard_reset(0, 2); -} diff --git a/src/mainboard/amd/serenade/resourcemap.c b/src/mainboard/amd/serenade/resourcemap.c deleted file mode 100644 index 2e026d07e7..0000000000 --- a/src/mainboard/amd/serenade/resourcemap.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * AMD Serenade needs a different resource map - * - */ - -static void setup_amd_serenade_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Base and Limit i Registers */ - /* Base = 0x8000, Limit = 0xffff, Read/Write, DstNode = 0, DstLink = LDT2 */ - PCI_ADDR(0, 0x18, 1, 0xbc), 0x00000048, 0x00ffff20, - PCI_ADDR(0, 0x18, 1, 0xb8), 0x000000f0, 0x00fc0003, - /* Base = 0x0a00, Limit = 0x0b00, Read/Write, DstNode = 0, DstLink = LDT2 */ - PCI_ADDR(0, 0x18, 1, 0xac), 0x00000048, 0x00000b20, - PCI_ADDR(0, 0x18, 1, 0xa8), 0x000000f0, 0x00000a03, - PCI_ADDR(0, 0x18, 1, 0xb4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xb0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xac), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xa8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xa4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xa0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9c), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8c), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - - /* PCI I/O Base and Limit i Registers */ - /* Base = 0x0000, Limit = 0x1fff, Read/Write, VAG/ISA enabled, - DstNode = 0, DstLink = LDT2 */ - PCI_ADDR(0, 0x18, 1, 0xc4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xc0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xcc), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xc8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xd4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xd0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xdc), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xd8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers for Non-coherent HT - * Bus 0x00 - 0xff, DstNode = 0, DstLink = LDT2, Read/Write */ - PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000FC88, 0xff000203, - PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xec), 0x0000FC88, 0x00000000, - }; - int max; - max = sizeof(register_values)/sizeof(register_values[0]); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/amd/serengeti_leopard/Config.lb b/src/mainboard/amd/serengeti_leopard/Config.lb deleted file mode 100644 index 3820885275..0000000000 --- a/src/mainboard/amd/serengeti_leopard/Config.lb +++ /dev/null @@ -1,426 +0,0 @@ -## -## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. -## -if USE_FAILOVER_IMAGE - default ROM_SECTION_SIZE = FAILOVER_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE ) -else - if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE ) - else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE ) - default ROM_SECTION_OFFSET = 0 - end -end - -## -## Compute the start location and size size of -## The linuxBIOS bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of linuxBIOS will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up linuxBIOS, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=65536 - -if USE_FAILOVER_IMAGE - default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) -else - if USE_FALLBACK_IMAGE - default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE) - else - default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) - end -end - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o - -#dir /drivers/si/3114 - -#needed by irq_tables and mptable and acpi_tables -object get_bus_conf.o - -if HAVE_MP_TABLE - object mptable.o -end - -if HAVE_PIRQ_TABLE - object irq_tables.o -end - -#if HAVE_ACPI_TABLES -# object acpi_tables.o -# object fadt.o -# if SB_HT_CHAIN_ON_BUS0 -# object dsdt_bus0.o -# else -# object dsdt.o -# end -# object ssdt.o -# if ACPI_SSDTX_NUM -# if SB_HT_CHAIN_ON_BUS0 -# object ssdt2_bus0.o -# else -# object ssdt2.o -# end -# end -#end - -if HAVE_ACPI_TABLES - object acpi_tables.o - object fadt.o - makerule dsdt.c - depends "$(MAINBOARD)/dx/dsdt_lb.dsl" - action "iasl -tc $(MAINBOARD)/dx/dsdt_lb.dsl" - action "mv dsdt_lb.hex dsdt.c" - end - object ./dsdt.o - - #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb - - if ACPI_SSDTX_NUM - makerule ssdt2.c - depends "$(MAINBOARD)/dx/pci2.asl" - action "iasl -tc $(MAINBOARD)/dx/pci2.asl" - action "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex" - action "mv pci2.hex ssdt2.c" - end - object ./ssdt2.o - end -end - -if USE_DCACHE_RAM - - if CONFIG_USE_INIT - # compile cache_as_ram.c to auto.o - makerule ./cache_as_ram_auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" - end - - else - #compile cache_as_ram.c to auto.inc - makerule ./cache_as_ram_auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" - action "perl -e 's/.rodata/.rom.data/g' -pi $@" - action "perl -e 's/.text/.section .rom.text/g' -pi $@" - end - - end -else - - ## - ## Romcc output - ## - makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" - end - - makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" - end - - makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" - end - makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" - end - -end -## -## Build our 16 bit and 32 bit linuxBIOS entry code -## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end -else - if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end -end - -mainboardinit cpu/x86/32bit/entry32.inc -if USE_DCACHE_RAM - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end - - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end -end - -## -## Build our reset vector (This is where linuxBIOS is entered) -## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end -else - if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end -end - -if USE_DCACHE_RAM -else - ### Should this be in the northbridge code? - mainboardinit arch/i386/lib/cpu_reset.inc -end - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -if USE_DCACHE_RAM - ## - ## Setup Cache-As-Ram - ## - mainboardinit cpu/amd/car/cache_as_ram.inc -end - -### -### This is the early phase of linuxBIOS startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover_failover.lds - end - end -else - if USE_FALLBACK_IMAGE - if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover.lds - else - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc - end - end -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## -if USE_DCACHE_RAM - - if CONFIG_USE_INIT - initobject cache_as_ram_auto.o - else - mainboardinit ./cache_as_ram_auto.inc - end - -else - - ## - ## Setup RAM - ## - mainboardinit cpu/x86/fpu/enable_fpu.inc - mainboardinit cpu/x86/mmx/enable_mmx.inc - mainboardinit cpu/x86/sse/enable_sse.inc - mainboardinit ./auto.inc - mainboardinit cpu/x86/sse/disable_sse.inc - mainboardinit cpu/x86/mmx/disable_mmx.inc - -end - -## -## Include the secondary Configuration files -## -if CONFIG_CHIP_NAME - config chip.h -end - -# sample config for amd/serengeti_cheetah -chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_940 - device apic 0 on end - end - end - device pci_domain 0 on - chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge - # devices on link 0, link 0 == LDT 0 - chip southbridge/amd/amd8132 - # the on/off keyword is mandatory - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 off end - device pci 1.0 off end - end - device pci 1.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on - chip drivers/i2c/i2cmux # pca9556 smbus mux - device i2c 18 on #0 pca9516 1 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end - device i2c 18 on #1 pca9516 2 - chip drivers/generic/generic #dimm 1-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 53 on end - end - end - end - end # acpi - device pci 1.5 off end - device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - chip northbridge/amd/amdk8 - device pci 19.0 on # northbridge - chip southbridge/amd/amd8151 - # the on/off keyword is mandatory - device pci 0.0 on end - device pci 1.0 on end - end - end # device pci 19.0 - - device pci 19.0 on end - device pci 19.0 on end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - end - - - end #pci_domain -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 off end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 off end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# end - -end - - diff --git a/src/mainboard/amd/serengeti_leopard/Options.lb b/src/mainboard/amd/serengeti_leopard/Options.lb deleted file mode 100644 index d18b1250f3..0000000000 --- a/src/mainboard/amd/serengeti_leopard/Options.lb +++ /dev/null @@ -1,313 +0,0 @@ -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses HAVE_ACPI_TABLES -uses ACPI_SSDTX_NUM -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses USE_FAILOVER_IMAGE -uses HAVE_FAILOVER_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_MAX_PHYSICAL_CPUS -uses CONFIG_LOGICAL_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses FALLBACK_SIZE -uses FAILOVER_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_ROM_PAYLOAD_START -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER -uses CONFIG_GDB_STUB -uses CONFIG_GDB_STUB -uses CROSS_COMPILE -uses CC -uses HOSTCC -uses OBJCOPY -uses CONFIG_CHIP_NAME -uses CONFIG_CONSOLE_VGA -uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK -uses HW_MEM_HOLE_SIZE_AUTO_INC -uses K8_HT_FREQ_1G_SUPPORT - -uses HT_CHAIN_UNITID_BASE -uses HT_CHAIN_END_UNITID_BASE -uses SB_HT_CHAIN_ON_BUS0 -uses SB_HT_CHAIN_UNITID_OFFSET_ONLY - -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE -uses CONFIG_USE_INIT - -uses SERIAL_CPU_INIT - -uses ENABLE_APIC_EXT_ID -uses APIC_ID_OFFSET -uses LIFT_BSP_APIC_ID - -uses CONFIG_PCI_64BIT_PREF_MEM - -uses CONFIG_LB_MEM_TOPK - -uses CONFIG_USE_PRINTK_IN_CAR - -### -### Build options -### - -## -## ROM_SIZE is the size of boot ROM that this board will use. -## -default ROM_SIZE=524288 - -## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use -## -#default FALLBACK_SIZE=131072 -#default FALLBACK_SIZE=0x40000 - -#FALLBACK: 256K-4K -default FALLBACK_SIZE=0x3f000 -#FAILOVER: 4K -default FAILOVER_SIZE=0x01000 - -default CONFIG_LB_MEM_TOPK=2048 - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 -default HAVE_FAILOVER_BOOT=1 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=11 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default HAVE_MP_TABLE=1 - -## ACPI tables will be included -default HAVE_ACPI_TABLES=1 -## extra SSDT num -default ACPI_SSDTX_NUM=1 - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=1 - -## -## Move the default LinuxBIOS cmos range off of AMD RTC registers -## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=4 -default CONFIG_MAX_PHYSICAL_CPUS=2 -default CONFIG_LOGICAL_CPUS=1 - -default SERIAL_CPU_INIT=0 - -default ENABLE_APIC_EXT_ID=0 -default APIC_ID_OFFSET=0x8 -default LIFT_BSP_APIC_ID=0 - -#CHIP_NAME ? -default CONFIG_CHIP_NAME=1 - -#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. -#2G -#default HW_MEM_HOLE_SIZEK=0x200000 -#1G -default HW_MEM_HOLE_SIZEK=0x100000 -#512M -#default HW_MEM_HOLE_SIZEK=0x80000 - -#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy -#default HW_MEM_HOLE_SIZE_AUTO_INC=1 - -#Opteron K8 1G HT Support -default K8_HT_FREQ_1G_SUPPORT=1 - -#VGA Console -default CONFIG_CONSOLE_VGA=1 -default CONFIG_PCI_ROM_RUN=1 - -#HT Unit ID offset -default HT_CHAIN_UNITID_BASE=0xa - -#real SB Unit ID -default HT_CHAIN_END_UNITID_BASE=0x6 - -#make the SB HT chain on bus 0 -default SB_HT_CHAIN_ON_BUS0=2 - -#allow capable device use that above 4G -#default CONFIG_PCI_64BIT_PREF_MEM=1 - -## -## enable CACHE_AS_RAM specifics -## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcc000 -default DCACHE_RAM_SIZE=0x4000 -default CONFIG_USE_INIT=0 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default MAINBOARD_PART_NUMBER="serengeti_leopard" -default MAINBOARD_VENDOR="AMD" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## -default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) - -## -## LinuxBIOS C code runs at this location in RAM -## -default _RAMBASE=0x00004000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD = 1 - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## -default CONFIG_USE_PRINTK_IN_CAR=1 - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 - -# Select the serial console base port -default TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 - -## -### Select the linuxBIOS loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 - -## -## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -### End Options.lb -end diff --git a/src/mainboard/amd/serengeti_leopard/acpi_tables.c b/src/mainboard/amd/serengeti_leopard/acpi_tables.c deleted file mode 100644 index eb15ec51bb..0000000000 --- a/src/mainboard/amd/serengeti_leopard/acpi_tables.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * Island Aruma ACPI support - * written by Stefan Reinauer <stepan@openbios.org> - * (C) 2005 Stefan Reinauer - * - * - * Copyright 2005 AMD - * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdk8_sysconf.h> - -#define DUMP_ACPI_TABLES 0 - -#if DUMP_ACPI_TABLES == 1 -static void dump_mem(unsigned start, unsigned end) -{ - - unsigned i; - print_debug("dump_mem:"); - for(i=start;i<end;i++) { - if((i & 0xf)==0) { - printk_debug("\n%08x:", i); - } - printk_debug(" %02x", (unsigned char)*((unsigned char *)i)); - } - print_debug("\n"); - } -#endif - -extern unsigned char AmlCode[]; -extern unsigned char AmlCode_ssdt[]; - -#if ACPI_SSDTX_NUM >= 1 -extern unsigned char AmlCode_ssdt2[]; -//extern unsigned char AmlCode_ssdt3[]; -//extern unsigned char AmlCode_ssdt4[]; -//extern unsigned char AmlCode_ssdt5[]; -//extern unsigned char AmlCode_ssdt6[]; -//extern unsigned char AmlCode_ssdt7[]; -//extern unsigned char AmlCode_ssdt8[]; -#endif - -#define IO_APIC_ADDR 0xfec00000UL - -extern unsigned char bus_isa; -extern unsigned char bus_8132_0; -extern unsigned char bus_8132_1; -extern unsigned char bus_8132_2; -extern unsigned char bus_8111_0; -extern unsigned char bus_8111_1; -extern unsigned char bus_8151_0; -extern unsigned char bus_8151_1; -extern unsigned apicid_8111; -extern unsigned apicid_8132_1; -extern unsigned apicid_8132_2; - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base=0x18; - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write 8111 IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, apicid_8111, - IO_APIC_ADDR, 0); - - /* Write all 8131 IOAPICs */ - { - device_t dev; - struct resource *res; - dev = dev_find_slot(bus_8132_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, apicid_8132_1, - res->base, gsi_base ); - gsi_base+=7; - - } - } - dev = dev_find_slot(bus_8132_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, apicid_8132_2, - res->base, gsi_base ); - gsi_base+=7; - } - } - } - - current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) - current, 0, 0, 2, 5 ); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edige-triggered, Active high*/ - - - /* create all subtables for processors */ - current = acpi_create_madt_lapic_nmis(current, 5, 1); - /* 1: LINT1 connect to NMI */ - - - return current; -} - -extern void get_bus_conf(void); - -extern void update_ssdt(void *ssdt); - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; - acpi_header_t *ssdtx; - - unsigned char *AmlCode_ssdtx[HC_POSSIBLE_NUM]; - - int i; - - get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn - - /* Align ACPI tables to 16byte */ - start = ( start + 0x0f ) & -0x10; - current = start; - - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - printk_debug("ACPI: * HPET\n"); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdt,hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * MADT\n"); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current+=madt->header.length; - acpi_add_table(rsdt,madt); - - - /* SRAT */ - printk_debug("ACPI: * SRAT\n"); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current+=srat->header.length; - acpi_add_table(rsdt,srat); - - /* SSDT */ - printk_debug("ACPI: * SSDT\n"); - ssdt = (acpi_header_t *)current; - current += ((acpi_header_t *)AmlCode_ssdt)->length; - memcpy((void *)ssdt, (void *)AmlCode_ssdt, ((acpi_header_t *)AmlCode_ssdt)->length); - //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c - update_ssdt((void*)ssdt); - /* recalculate checksum */ - ssdt->checksum = 0; - ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); - acpi_add_table(rsdt,ssdt); - -#if ACPI_SSDTX_NUM >= 1 - // we need to make ssdt2 match to PCI2 in pci2.asl,... pci1234[1] - AmlCode_ssdtx[1] = AmlCode_ssdt2; -// AmlCode_ssdtx[2] = AmlCode_ssdt3; -// AmlCode_ssdtx[3] = AmlCode_ssdt4; -// AmlCode_ssdtx[4] = AmlCode_ssdt5; -// AmlCode_ssdtx[5] = AmlCode_ssdt6; -// AmlCode_ssdtx[6] = AmlCode_ssdt7; -// AmlCode_ssdtx[7] = AmlCode_ssdt8; - - //same htio, but different possition? We may have to copy, change HCIN, and recalculate the checknum and add_table - - for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink - if((sysconf.pci1234[i] & 1) != 1 ) continue; - printk_debug("ACPI: * SSDT for PCI%d\n", i+1); //pci0 and pci1 are in dsdt - ssdtx = (acpi_header_t *)current; - current += ((acpi_header_t *)AmlCode_ssdtx[i])->length; - memcpy((void *)ssdtx, (void *)AmlCode_ssdtx[i], ((acpi_header_t *)AmlCode_ssdtx[i])->length); - acpi_add_table(rsdt,ssdtx); - } -#endif - - - /* FACS */ - printk_debug("ACPI: * FACS\n"); - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* DSDT */ - printk_debug("ACPI: * DSDT\n"); - dsdt = (acpi_header_t *)current; - current += ((acpi_header_t *)AmlCode)->length; - memcpy((void *)dsdt,(void *)AmlCode, \ - ((acpi_header_t *)AmlCode)->length); - printk_debug("ACPI: * DSDT @ %08x Length %x\n",dsdt,dsdt->length); - - /* FDAT */ - printk_debug("ACPI: * FADT\n"); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt,facs,dsdt); - acpi_add_table(rsdt,fadt); - -#if DUMP_ACPI_TABLES == 1 - printk_debug("rsdp\n"); - dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - - printk_debug("rsdt\n"); - dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - - printk_debug("madt\n"); - dump_mem(madt, ((void *)madt) + madt->header.length); - - printk_debug("srat\n"); - dump_mem(srat, ((void *)srat) + srat->header.length); - - printk_debug("ssdt\n"); - dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - - printk_debug("fadt\n"); - dump_mem(fadt, ((void *)fadt) + fadt->header.length); -#endif - - printk_info("ACPI: done.\n"); - return current; -} - diff --git a/src/mainboard/amd/serengeti_leopard/auto.c b/src/mainboard/amd/serengeti_leopard/auto.c deleted file mode 100644 index d2ddf4fdf5..0000000000 --- a/src/mainboard/amd/serengeti_leopard/auto.c +++ /dev/null @@ -1,324 +0,0 @@ -#define ASSEMBLY 1 - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include <cpu/amd/model_fxx_rev.h> -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -/* Look up a which bus a given node/link combination is on. - * return 0 when we can't find the answer. - */ -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - unsigned reg; - - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - unsigned config_map; - config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); - if ((config_map & 3) != 3) { - continue; - } - if ((((config_map >> 4) & 7) == node) && - (((config_map >> 8) & 3) == link)) - { - return (config_map >> 16) & 0xff; - } - } - return 0; -} - -static void hard_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3); - - set_bios_reset(); - - /* enable cf9 */ - pci_write_config8(dev, 0x41, 0xf1); - /* reset */ - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - device_t dev; - - /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0); - - set_bios_reset(); - pci_write_config8(dev, 0x47, 1); -} - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - } - else { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - } - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_HUB 0x18 - int ret,i; - unsigned device=(ctrl->channel0[0])>>8; - /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/ - i=2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - } while ((ret!=0) && (i-->0)); - - smbus_write_byte(SMBUS_HUB, 0x03, 0); -} -#if 0 -static inline void change_i2c_mux(unsigned device) -{ -#define SMBUS_HUB 0x18 - int ret, i; - print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\r\n"); - i=2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\r\n"); - } while ((ret!=0) && (i-->0)); - ret = smbus_write_byte(SMBUS_HUB, 0x03, 0); - print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\r\n"); -} -#endif - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -//#include "northbridge/amd/amdk8/setup_resource_map.c" -#define QRANK_DIMM_SUPPORT 1 -#include "northbridge/amd/amdk8/raminit.c" - -#if 0 - #define ENABLE_APIC_EXT_ID 1 - #define APIC_ID_OFFSET 0x10 - #define LIFT_BSP_APIC_ID 0 -#else - #define ENABLE_APIC_EXT_ID 0 -#endif -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "sdram/generic_sdram.c" - -/* tyan does not want the default */ -#include "resourcemap.c" - -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 -#endif - -#include "cpu/amd/dualcore/dualcore.c" - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) - -#define RC0 ((1<<0)<<8) -#define RC1 ((1<<1)<<8) - -#define DIMM0 0x50 -#define DIMM1 0x51 - -static void main(unsigned long bist) -{ - static const struct mem_controller cpu[] = { -#if FIRST_CPU - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { RC0|DIMM0, 0, 0, 0 }, - .channel1 = { RC0|DIMM1, 0, 0, 0 }, - }, -#endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { RC1|DIMM0, 0 , 0, 0 }, - .channel1 = { RC1|DIMM1, 0 , 0, 0 }, - - }, -#endif - - }; - - int needs_reset; -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - - if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); - - id = get_node_core_id_x(); // that is initid - #if ENABLE_APIC_EXT_ID == 1 - if(id.coreid == 0) { - enable_apic_ext_id(id.nodeid); - } - #endif -#else - nodeid = get_node_id(); - #if ENABLE_APIC_EXT_ID == 1 - enable_apic_ext_id(nodeid); - #endif -#endif - - enable_lapic(); - init_timer(); - -#if CONFIG_LOGICAL_CPUS==1 - #if ENABLE_APIC_EXT_ID == 1 - #if LIFT_BSP_APIC_ID == 0 - if( id.nodeid != 0 ) //all except cores in node0 - #endif - lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); - #endif - - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(id.nodeid); -// start_other_core(id.nodeid); - } - -#else - #if ENABLE_APIC_EXT_ID == 1 - #if LIFT_BSP_APIC_ID == 0 - if(nodeid != 0) - #endif - lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 - - #endif - - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); -#endif - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } - } - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_serengeti_leopard_resource_map(); - needs_reset = setup_coherent_ht_domain(); - -#if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - start_other_cores(); -#endif - -#if 0 - // You need to preset bus num in PCI_DEV(0, 0x18,1) 0xe0, 0xe4, 0xe8, 0xec - needs_reset |= ht_setup_chains(2); -#else - // automatically set that for you, but you might meet tight space - needs_reset |= ht_setup_chains_x(); -#endif - - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - - enable_smbus(); -#if 0 - dump_spd_registers(&cpu[0]); -#endif - memreset_setup(); - sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); - -#if 0 - dump_pci_devices(); -#endif - - /* Check all of memory */ -#if 0 - msr_t msr; - msr = rdmsr(TOP_MEM2); - print_debug("TOP_MEM2: "); - print_debug_hex32(msr.hi); - print_debug_hex32(msr.lo); - print_debug("\r\n"); -#endif - -#if 0 - ram_check(0x00000000, msr.lo+(msr.hi<<32)); -#endif - -#if 0 - // Check 16MB of memory @ 0 - ram_check(0x00000000, 0x00100000); - // Check 16MB of memory @ 2GB - ram_check(0x80000000, 0x80100000); -#endif - - -} diff --git a/src/mainboard/amd/serengeti_leopard/cache_as_ram_auto.c b/src/mainboard/amd/serengeti_leopard/cache_as_ram_auto.c deleted file mode 100644 index 9a0c3aec21..0000000000 --- a/src/mainboard/amd/serengeti_leopard/cache_as_ram_auto.c +++ /dev/null @@ -1,322 +0,0 @@ -#define ASSEMBLY 1 -#define __ROMCC__ - -#define RAMINIT_SYSINFO 0 - -#if CONFIG_LOGICAL_CPUS==1 - #define SET_NB_CFG_54 1 -#endif - -//use by raminit -#define QRANK_DIMM_SUPPORT 1 - -//used by incoherent_ht -//#define K8_SCAN_PCI_BUS 1 -//#define K8_ALLOCATE_IO_RANGE 1 - -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" - -#if USE_FAILOVER_IMAGE==0 -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" - -#if 0 -static void post_code(uint8_t value) { -#if 1 - int i; - for(i=0;i<0x80000;i++) { - outb(value, 0x80); - } -#endif -} -#endif - -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" - -#endif - -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#if USE_FAILOVER_IMAGE==0 - -#if CONFIG_USE_INIT == 0 -#include "lib/memcpy.c" - #if CONFIG_USE_PRINTK_IN_CAR == 1 - #include "lib/uart8250.c" - #include "console/vtxprintf.c" - #include "arch/i386/lib/printk_init.c" - #endif -#endif - -#include "northbridge/amd/amdk8/debug.c" -#include "superio/winbond/w83627hf/w83627hf_early_serial.c" - -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" - -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -#include "southbridge/amd/amd8111/amd8111_early_ctrl.c" - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - } - else { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - } - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_HUB 0x18 - int ret,i; - unsigned device=(ctrl->channel0[0])>>8; - /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/ - i=2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - } while ((ret!=0) && (i-->0)); - - smbus_write_byte(SMBUS_HUB, 0x03, 0); -} -#if 0 -static inline void change_i2c_mux(unsigned device) -{ -#define SMBUS_HUB 0x18 - int ret, i; - print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\r\n"); - i=2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\r\n"); - } while ((ret!=0) && (i-->0)); - ret = smbus_write_byte(SMBUS_HUB, 0x03, 0); - print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\r\n"); -} -#endif - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - - -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "sdram/generic_sdram.c" - - /* tyan does not want the default */ -#include "resourcemap.c" - -#include "cpu/amd/dualcore/dualcore.c" - -#define RC0 ((1<<0)<<8) -#define RC1 ((1<<1)<<8) - -#define DIMM0 0x50 -#define DIMM1 0x51 - -#include "cpu/amd/car/copy_and_run.c" -#include "cpu/amd/car/post_cache_as_ram.c" - -#include "cpu/amd/model_fxx/init_cpus.c" - -#endif - -#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) - -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" - -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - /* Setup the flash access */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ -// post_code(0x22); - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: -// post_code(0x23); - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -// post_code(0x25); -#if HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if HAVE_FAILOVER_BOOT==1 - #if USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - -#if USE_FAILOVER_IMAGE==0 - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - RC0|DIMM0, 0, 0, 0, - RC0|DIMM1, 0, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - RC1|DIMM0, 0 , 0, 0, - RC1|DIMM1, 0 , 0, 0, -#endif - }; - - int needs_reset; - unsigned bsp_apicid = 0; - - struct mem_controller ctrl[8]; - unsigned nodes; - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx); - } - -// post_code(0x32); - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - -// dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); - - setup_serengeti_leopard_resource_map(); -#if 0 - dump_pci_device(PCI_DEV(0, 0x18, 0)); - dump_pci_device(PCI_DEV(0, 0x19, 0)); -#endif - - needs_reset = setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - needs_reset |= ht_setup_chains_x(); - - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); - - enable_smbus(); -#if 0 - dump_spd_registers(&cpu[0]); -#endif -#if 0 - dump_smbus_registers(); -#endif - - memreset_setup(); - -// init_timer(); // Need to use TMICT to synconize FID/VID - - sdram_initialize(nodes, ctrl); - -#if 0 - print_pci_devices(); -#endif - -#if 0 - dump_pci_devices(); -#endif - - post_cache_as_ram(); - -} - -#endif diff --git a/src/mainboard/amd/serengeti_leopard/chip.h b/src/mainboard/amd/serengeti_leopard/chip.h deleted file mode 100644 index e84ffdf729..0000000000 --- a/src/mainboard/amd/serengeti_leopard/chip.h +++ /dev/null @@ -1,6 +0,0 @@ -extern struct chip_operations mainboard_amd_serengeti_leopard_ops; - -struct mainboard_amd_serengeti_leopard_config { -// int fixup_scsi; -// int fixup_vga; -}; diff --git a/src/mainboard/amd/serengeti_leopard/cmos.layout b/src/mainboard/amd/serengeti_leopard/cmos.layout deleted file mode 100644 index c1f3d75316..0000000000 --- a/src/mainboard/amd/serengeti_leopard/cmos.layout +++ /dev/null @@ -1,98 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 dual_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 reserved_memory - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 - - diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8111.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8111.asl deleted file mode 100644 index e64bc4a062..0000000000 --- a/src/mainboard/amd/serengeti_leopard/dx/amd8111.asl +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright 2005 AMD - */ -//AMD8111 - Name (APIC, Package (0x04) - { - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10},// 0x0004ffff : assusme 8131 is present - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11}, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12}, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13} - }) - - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00}, - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00}, - Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00}, - Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00} - }) - - Name (DNCG, Ones) - - Method (_PRT, 0, NotSerialized) - { - If (LEqual (^DNCG, Ones)) { - Store (DADD(\_SB.PCI0.SBDN, 0x0001ffff), Local0) - // Update the Device Number according to SBDN - Store(Local0, Index (DeRefOf (Index (PICM, 0)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 1)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 2)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 3)), 0)) - - Store(Local0, Index (DeRefOf (Index (APIC, 0)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 1)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 2)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 3)), 0)) - - Store (0x00, ^DNCG) - - } - - If (LNot (PICF)) { - Return (PICM) - } - Else { - Return (APIC) - } - } - - Device (SBC3) - { - /* acpi smbus it should be 0x00040003 if 8131 present */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(\_SB.PCI0.SBDN, 0x00010003)) - } - OperationRegion (PIRQ, PCI_Config, 0x56, 0x02) - Field (PIRQ, ByteAcc, Lock, Preserve) - { - PIBA, 8, - PIDC, 8 - } -/* - OperationRegion (TS3_, PCI_Config, 0xC4, 0x02) - Field (TS3_, DWordAcc, NoLock, Preserve) - { - PTS3, 16 - } -*/ - } - - Device (HPET) - { - Name (HPT, 0x00) - Name (_HID, EisaId ("PNP0103")) - Name (_UID, 0x00) - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - Memory32Fixed (ReadWrite, 0xFED00000, 0x00000400) - }) - Return (BUF0) - } - } - - Include ("amd8111_pic.asl") - - Include ("amd8111_isa.asl") - - Device (TP2P) - { - /* 8111 P2P and it should 0x00030000 when 8131 present*/ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(\_SB.PCI0.SBDN, 0x00000000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x08, 0x03 }) } - Else { Return (Package (0x02) { 0x08, 0x01 }) } - } - - Device (USB0) - { - Name (_ADR, 0x00000000) - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) } - Else { Return (Package (0x02) { 0x0F, 0x01 }) } - } - } - - Device (USB1) - { - Name (_ADR, 0x00000001) - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) } - Else { Return (Package (0x02) { 0x0F, 0x01 }) } - } - } - - Name (APIC, Package (0x0C) - { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, //USB - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, - - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, //Slot 4 - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 }, - - Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, //Slot 3 - Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 } - }) - - Name (PICM, Package (0x0C) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //USB - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //Slot 4 - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, //Slot 3 - Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 } - }) - - Method (_PRT, 0, NotSerialized) - { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } - diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8111_isa.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8111_isa.asl deleted file mode 100644 index b68230607e..0000000000 --- a/src/mainboard/amd/serengeti_leopard/dx/amd8111_isa.asl +++ /dev/null @@ -1,176 +0,0 @@ -/* - * Copyright 2005 AMD - */ -//AMD8111 isa - - Device (ISA) - { - /* lpc 0x00040000 */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(\_SB.PCI0.SBDN, 0x00010000)) - } - - OperationRegion (PIRY, PCI_Config, 0x51, 0x02) // LPC Decode Registers - Field (PIRY, ByteAcc, NoLock, Preserve) - { - Z000, 2, // Parallel Port Range - , 1, - ECP, 1, // ECP Enable - FDC1, 1, // Floppy Drive Controller 1 - FDC2, 1, // Floppy Drive Controller 2 - Offset (0x01), - Z001, 3, // Serial Port A Range - SAEN, 1, // Serial Post A Enabled - Z002, 3, // Serial Port B Range - SBEN, 1 // Serial Post B Enabled - } - - Device (PIC) - { - Name (_HID, EisaId ("PNP0000")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0020, 0x0020, 0x01, 0x02) - IO (Decode16, 0x00A0, 0x00A0, 0x01, 0x02) - IRQ (Edge, ActiveHigh, Exclusive) {2} - }) - } - - Device (DMA1) - { - Name (_HID, EisaId ("PNP0200")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0000, 0x0000, 0x01, 0x10) - IO (Decode16, 0x0080, 0x0080, 0x01, 0x10) - IO (Decode16, 0x00C0, 0x00C0, 0x01, 0x20) - DMA (Compatibility, NotBusMaster, Transfer16) {4} - }) - } - - Device (TMR) - { - Name (_HID, EisaId ("PNP0100")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0040, 0x0040, 0x01, 0x04) - IRQ (Edge, ActiveHigh, Exclusive) {0} - }) - } - - Device (RTC) - { - Name (_HID, EisaId ("PNP0B00")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0070, 0x0070, 0x01, 0x06) - IRQ (Edge, ActiveHigh, Exclusive) {8} - }) - } - - Device (SPKR) - { - Name (_HID, EisaId ("PNP0800")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0061, 0x0061, 0x01, 0x01) - }) - } - - Device (COPR) - { - Name (_HID, EisaId ("PNP0C04")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x00F0, 0x00F0, 0x01, 0x10) - IRQ (Edge, ActiveHigh, Exclusive) {13} - }) - } - - Device (SYSR) - { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x00) - Name (SYR1, ResourceTemplate () - { - IO (Decode16, 0x04D0, 0x04D0, 0x01, 0x02) //wrh092302 - added to report Thor NVRAM - IO (Decode16, 0x1100, 0x117F, 0x01, 0x80) //wrh092302 - added to report Thor NVRAM - IO (Decode16, 0x1180, 0x11FF, 0x01, 0x80) - IO (Decode16, 0x0010, 0x0010, 0x01, 0x10) - IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E) - IO (Decode16, 0x0044, 0x0044, 0x01, 0x1C) - IO (Decode16, 0x0062, 0x0062, 0x01, 0x02) - IO (Decode16, 0x0065, 0x0065, 0x01, 0x0B) - IO (Decode16, 0x0076, 0x0076, 0x01, 0x0A) - IO (Decode16, 0x0090, 0x0090, 0x01, 0x10) - IO (Decode16, 0x00A2, 0x00A2, 0x01, 0x1E) - IO (Decode16, 0x00E0, 0x00E0, 0x01, 0x10) - IO (Decode16, 0x0B78, 0x0B78, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error - IO (Decode16, 0x0190, 0x0190, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error - }) - Method (_CRS, 0, NotSerialized) - { - Return (SYR1) - } - } - - Device (MEM) - { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - Memory32Fixed (ReadWrite, 0x000E0000, 0x00020000) // BIOS E4000-FFFFF - Memory32Fixed (ReadWrite, 0x000C0000, 0x00000000) // video BIOS c0000-c8404 - Memory32Fixed (ReadWrite, 0xFEC00000, 0x00001000) // I/O APIC - Memory32Fixed (ReadWrite, 0xFFC00000, 0x00380000) // LPC forwarded, 4 MB w/ROM - Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000) // Local APIC - Memory32Fixed (ReadWrite, 0xFFF80000, 0x00080000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS - }) - // Read the Video Memory length - CreateDWordField (BUF0, 0x14, CLEN) - CreateDWordField (BUF0, 0x10, CBAS) - - ShiftLeft (VGA1, 0x09, Local0) - Store (Local0, CLEN) - - Return (BUF0) - } - } - - Device (PS2M) - { - Name (_HID, EisaId ("PNP0F13")) - Name (_CRS, ResourceTemplate () - { - IRQNoFlags () {12} - }) - Method (_STA, 0, NotSerialized) - { - And (FLG0, 0x04, Local0) - If (LEqual (Local0, 0x04)) { Return (0x0F) } - Else { Return (0x00) } - } - } - - Device (PS2K) - { - Name (_HID, EisaId ("PNP0303")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - } - Include ("superio.asl") - - } - diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8111_pic.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8111_pic.asl deleted file mode 100644 index 228f3f84f1..0000000000 --- a/src/mainboard/amd/serengeti_leopard/dx/amd8111_pic.asl +++ /dev/null @@ -1,360 +0,0 @@ -/* - * Copyright 2005 AMD - */ -//AMD8111 pic LNKA B C D - - Device (LNKA) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x01) - Method (_STA, 0, NotSerialized) - { - And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local0) - If (LEqual (Local0, 0x00)) { Return (0x09) } //Disabled - Else { Return (0x0B) } //Enabled - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFA) - } - - Method (_DIS, 0, NotSerialized) - { - Store (0x01, Local3) - And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local1) - Store (Local1, Local2) - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local1) - } - - ShiftLeft (Local3, Local1, Local3) - Not (Local3, Local3) - And (\_SB.PCI0.SBC3.PIBA, 0xF0, \_SB.PCI0.SBC3.PIBA) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFA, 0x01, IRA1) - CreateByteField (BUFA, 0x02, IRA2) - Store (0x00, Local3) - Store (0x00, Local4) - And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local1) - If (LNot (LEqual (Local1, 0x00))) - { // Routing enable - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRA1) - Store (Local4, IRA2) - } - - Return (BUFA) - } - - Method (_SRS, 1, NotSerialized) - { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) - { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - - And (\_SB.PCI0.SBC3.PIBA, 0xF0, \_SB.PCI0.SBC3.PIBA) - Or (\_SB.PCI0.SBC3.PIBA, Local1, \_SB.PCI0.SBC3.PIBA) - } - } - - Device (LNKB) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x02) - Method (_STA, 0, NotSerialized) - { - And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local0) - If (LEqual (Local0, 0x00)) { Return (0x09) } - Else { Return (0x0B) } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFB) - } - - Method (_DIS, 0, NotSerialized) - { - Store (0x01, Local3) - And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - Store (Local1, Local2) - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local1) - } - - ShiftLeft (Local3, Local1, Local3) - Not (Local3, Local3) - And (\_SB.PCI0.SBC3.PIBA, 0x0F, \_SB.PCI0.SBC3.PIBA) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFB, 0x01, IRB1) - CreateByteField (BUFB, 0x02, IRB2) - Store (0x00, Local3) - Store (0x00, Local4) - And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LNot (LEqual (Local1, 0x00))) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRB1) - Store (Local4, IRB2) - } - - Return (BUFB) - } - - Method (_SRS, 1, NotSerialized) - { - CreateByteField (Arg0, 0x01, IRB1) - CreateByteField (Arg0, 0x02, IRB2) - ShiftLeft (IRB2, 0x08, Local0) - Or (Local0, IRB1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) - { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - - And (\_SB.PCI0.SBC3.PIBA, 0x0F, \_SB.PCI0.SBC3.PIBA) - ShiftLeft (Local1, 0x04, Local1) - Or (\_SB.PCI0.SBC3.PIBA, Local1, \_SB.PCI0.SBC3.PIBA) - } - } - - Device (LNKC) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x03) - Method (_STA, 0, NotSerialized) - { - And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local0) - If (LEqual (Local0, 0x00)) { Return (0x09) } - Else { Return (0x0B) } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFA) - } - - Method (_DIS, 0, NotSerialized) - { - Store (0x01, Local3) - And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local1) - Store (Local1, Local2) - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local1) - } - - ShiftLeft (Local3, Local1, Local3) - Not (Local3, Local3) - And (\_SB.PCI0.SBC3.PIDC, 0xF0, \_SB.PCI0.SBC3.PIDC) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFA, 0x01, IRA1) - CreateByteField (BUFA, 0x02, IRA2) - Store (0x00, Local3) - Store (0x00, Local4) - And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local1) - If (LNot (LEqual (Local1, 0x00))) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRA1) - Store (Local4, IRA2) - } - - Return (BUFA) - } - - Method (_SRS, 1, NotSerialized) - { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) - { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - - And (\_SB.PCI0.SBC3.PIDC, 0xF0, \_SB.PCI0.SBC3.PIDC) - Or (\_SB.PCI0.SBC3.PIDC, Local1, \_SB.PCI0.SBC3.PIDC) - } - } - - Device (LNKD) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x04) - Method (_STA, 0, NotSerialized) - { - And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local0) - If (LEqual (Local0, 0x00)) { Return (0x09) } - Else { Return (0x0B) } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFB) - } - - Method (_DIS, 0, NotSerialized) - { - Store (0x01, Local3) - And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - Store (Local1, Local2) - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local1) - } - - ShiftLeft (Local3, Local1, Local3) - Not (Local3, Local3) - And (\_SB.PCI0.SBC3.PIDC, 0x0F, \_SB.PCI0.SBC3.PIDC) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFB, 0x01, IRB1) - CreateByteField (BUFB, 0x02, IRB2) - Store (0x00, Local3) - Store (0x00, Local4) - And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LNot (LEqual (Local1, 0x00))) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRB1) - Store (Local4, IRB2) - } - - Return (BUFB) - } - - Method (_SRS, 1, NotSerialized) - { - CreateByteField (Arg0, 0x01, IRB1) - CreateByteField (Arg0, 0x02, IRB2) - ShiftLeft (IRB2, 0x08, Local0) - Or (Local0, IRB1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) - { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - - And (\_SB.PCI0.SBC3.PIDC, 0x0F, \_SB.PCI0.SBC3.PIDC) - ShiftLeft (Local1, 0x04, Local1) - Or (\_SB.PCI0.SBC3.PIDC, Local1, \_SB.PCI0.SBC3.PIDC) - } - } - - diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8131.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8131.asl deleted file mode 100644 index e209665e48..0000000000 --- a/src/mainboard/amd/serengeti_leopard/dx/amd8131.asl +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright 2005 AMD - */ - - Device (PG0A) - { - /* 8132 pcix bridge*/ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00000000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) } - Else { Return (Package (0x02) { 0x29, 0x01 }) } - } - - Name (APIC, Package (0x14) - { - // Slot A - PIRQ BCDA - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 2 - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A }, - Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 }, - - //Cypress Slot A - PIRQ BCDA - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x19 }, //? - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1A }, - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x18 }, - - //Cypress Slot B - PIRQ CDAB - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x1A }, //? - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x1B }, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x18 }, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x19 }, - - //Cypress Slot C - PIRQ DABC - Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x1B }, //? - Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x18 }, - Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x19 }, - Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x1A }, - - //Cypress Slot D - PIRQ ABCD - Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x18 }, //? - Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x19 }, - Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x1A }, - Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x1B } - }) - Name (PICM, Package (0x14) - { - Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },//Slot 2 - Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }, - - Package (0x04) { 0x0003FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }, - - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 }, - - Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 }, - - Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } - }) - Method (_PRT, 0, NotSerialized) - { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } - - Device (PG0B) - { - /* 8132 pcix bridge 2 */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00010000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x22, 0x03 }) } - Else { Return (Package (0x02) { 0x22, 0x01 }) } - } - - Name (APIC, Package (0x04) - { - // Slot A - PIRQ ABCD - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x1F },// Slot 1 - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x20 }, - Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x21 }, - Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x22 } - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 1 - Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } - }) - Method (_PRT, 0, NotSerialized) - { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8151.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8151.asl deleted file mode 100644 index 001d45b0fe..0000000000 --- a/src/mainboard/amd/serengeti_leopard/dx/amd8151.asl +++ /dev/null @@ -1,29 +0,0 @@ -// AMD8151 - Device (AGPB) - { - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00010000)) - } - - Name (APIC, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 } - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } - }) - Method (_PRT, 0, NotSerialized) - { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } - diff --git a/src/mainboard/amd/serengeti_leopard/dx/amdk8_util.asl b/src/mainboard/amd/serengeti_leopard/dx/amdk8_util.asl deleted file mode 100644 index e9155476c5..0000000000 --- a/src/mainboard/amd/serengeti_leopard/dx/amdk8_util.asl +++ /dev/null @@ -1,315 +0,0 @@ -/* - * Copyright 2005 AMD - */ - -//AMD k8 util for BUSB and res range - - Scope (\_SB) - { - - Name (OSTB, Ones) - Method (OSTP, 0, NotSerialized) - { - If (LEqual (^OSTB, Ones)) - { - Store (0x00, ^OSTB) - } - - Return (^OSTB) - } - - Method (SEQL, 2, Serialized) - { - Store (SizeOf (Arg0), Local0) - Store (SizeOf (Arg1), Local1) - If (LNot (LEqual (Local0, Local1))) { Return (Zero) } - - Name (BUF0, Buffer (Local0) {}) - Store (Arg0, BUF0) - Name (BUF1, Buffer (Local0) {}) - Store (Arg1, BUF1) - Store (Zero, Local2) - While (LLess (Local2, Local0)) - { - Store (DerefOf (Index (BUF0, Local2)), Local3) - Store (DerefOf (Index (BUF1, Local2)), Local4) - If (LNot (LEqual (Local3, Local4))) { Return (Zero) } - - Increment (Local2) - } - - Return (One) - } - - - Method (DADD, 2, NotSerialized) - { - Store( Arg1, Local0) - Store( Arg0, Local1) - Add( ShiftLeft(Local1,16), Local0, Local0) - Return (Local0) - } - - - Method (GHCE, 1, NotSerialized) // check if the HC enabled - { - Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1) - if(LEqual ( And(Local1, 0x01), 0x01)) { Return (0x0F) } - Else { Return (0x00) } - } - - Method (GHCN, 1, NotSerialized) // get the node num for the HC - { - Store (0x00, Local0) - Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1) - Store (ShiftRight( And (Local1, 0xf0), 0x04), Local0) - Return (Local0) - } - - Method (GHCL, 1, NotSerialized) // get the link num on node for the HC - { - Store (0x00, Local0) - Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1) - Store (ShiftRight( And (Local1, 0xf00), 0x08), Local0) - Return (Local0) - } - - Method (GHCD, 2, NotSerialized) // get the unit id base for the HT device in HC - { - Store (0x00, Local0) - Store (DerefOf (Index (\_SB.PCI0.HCDN, Arg0)), Local1) - Store (Arg1, Local2) // Arg1 could be 3, 2, 1, 0 - Multiply (Local2, 0x08, Local2) // change to 24, 16, 8, 0 - Store (And (ShiftRight( Local1, Local2), 0xff), Local0) - Return (Local0) - } - - Method (GBUS, 2, NotSerialized) - { - Store (0x00, Local0) - While (LLess (Local0, 0x04)) - { - Store (DerefOf (Index (\_SB.PCI0.BUSN, Local0)), Local1) - If (LEqual (And (Local1, 0x03), 0x03)) - { - If (LEqual (Arg0, ShiftRight (And (Local1, 0x70), 0x04))) - { - If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0300), 0x08)))) - { - Return (ShiftRight (And (Local1, 0x00FF0000), 0x10)) - } - } - } - - Increment (Local0) - } - - Return (0x00) - } - - Method (GWBN, 2, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0000, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0000,,,) - }) - CreateWordField (BUF0, 0x08, BMIN) - CreateWordField (BUF0, 0x0A, BMAX) - CreateWordField (BUF0, 0x0E, BLEN) - Store (0x00, Local0) - While (LLess (Local0, 0x04)) - { - Store (DerefOf (Index (\_SB.PCI0.BUSN, Local0)), Local1) - If (LEqual (And (Local1, 0x03), 0x03)) - { - If (LEqual (Arg0, ShiftRight (And (Local1, 0x70), 0x04))) - { - If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0300), 0x08)))) - { - Store (ShiftRight (And (Local1, 0x00FF0000), 0x10), BMIN) - Store (ShiftRight (Local1, 0x18), BMAX) - Subtract (BMAX, BMIN, BLEN) - Increment (BLEN) - Return (RTAG (BUF0)) - } - } - } - - Increment (Local0) - } - - Return (RTAG (BUF0)) - } - - Method (GMEM, 2, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x00000000, // Address Range Minimum - 0x00000000, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x00000000,,, - , AddressRangeMemory, TypeStatic) - }) - CreateDWordField (BUF0, 0x0A, MMIN) - CreateDWordField (BUF0, 0x0E, MMAX) - CreateDWordField (BUF0, 0x16, MLEN) - Store (0x00, Local0) - Store (0x00, Local4) - Store (0x00, Local3) - While (LLess (Local0, 0x10)) - { - Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local1) - Increment (Local0) - Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local2) - If (LEqual (And (Local1, 0x03), 0x03)) - { - If (LEqual (Arg0, And (Local2, 0x07))) - { - If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04)))) - { - Store (ShiftLeft (And (Local1, 0xFFFFFF00), 0x08), MMIN) - Store (ShiftLeft (And (Local2, 0xFFFFFF00), 0x08), MMAX) - Or (MMAX, 0xFFFF, MMAX) - Subtract (MMAX, MMIN, MLEN) - - If (Local4) - { - Concatenate (RTAG (BUF0), Local3, Local5) - Store (Local5, Local3) - } - Else - { - If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, \_SB.PCI0.SBLK))) - { - Store (\_SB.PCI0.TOM1, MMIN) - Subtract (MMAX, MMIN, MLEN) - Increment (MLEN) - } - - Store (RTAG (BUF0), Local3) - } - - Increment (Local4) - } - } - } - - Increment (Local0) - } - - If (LNot (Local4)) - { - Store (BUF0, Local3) - } - - Return (Local3) - } - - Method (GIOR, 2, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x00000000, // Address Space Granularity - 0x00000000, // Address Range Minimum - 0x00000000, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x00000000,,, - , TypeStatic) - }) - CreateDWordField (BUF0, 0x0A, PMIN) - CreateDWordField (BUF0, 0x0E, PMAX) - CreateDWordField (BUF0, 0x16, PLEN) - Store (0x00, Local0) - Store (0x00, Local4) - Store (0x00, Local3) - While (LLess (Local0, 0x08)) - { - Store (DerefOf (Index (\_SB.PCI0.PCIO, Local0)), Local1) - Increment (Local0) - Store (DerefOf (Index (\_SB.PCI0.PCIO, Local0)), Local2) - If (LEqual (And (Local1, 0x03), 0x03)) - { - If (LEqual (Arg0, And (Local2, 0x07))) - { - If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04)))) - { - Store (And (Local1, 0x01FFF000), PMIN) - Store (And (Local2, 0x01FFF000), PMAX) - Or (PMAX, 0x0FFF, PMAX) - Subtract (PMAX, PMIN, PLEN) - Increment (PLEN) - - If (Local4) - { - Concatenate (RTAG (BUF0), Local3, Local5) - Store (Local5, Local3) - } - Else - { - If (LGreater (PMAX, PMIN)) - { - If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, \_SB.PCI0.SBLK))) - { - Store (0x0D00, PMIN) - Subtract (PMAX, PMIN, PLEN) - Increment (PLEN) - } - - Store (RTAG (BUF0), Local3) - Increment (Local4) - } - - If (And (Local1, 0x10)) - { - Store (0x03B0, PMIN) - Store (0x03DF, PMAX) - Store (0x30, PLEN) - If (Local4) - { - Concatenate (RTAG (BUF0), Local3, Local5) - Store (Local5, Local3) - } - Else - { - Store (RTAG (BUF0), Local3) - } - } - } - - Increment (Local4) - } - } - } - - Increment (Local0) - } - - If (LNot (Local4)) - { - Store (RTAG (BUF0), Local3) - } - - Return (Local3) - } - - Method (RTAG, 1, NotSerialized) - { - Store (Arg0, Local0) - Store (SizeOf (Local0), Local1) - Subtract (Local1, 0x02, Local1) - Multiply (Local1, 0x08, Local1) - CreateField (Local0, 0x00, Local1, RETB) - Store (RETB, Local2) - Return (Local2) - } - } - diff --git a/src/mainboard/amd/serengeti_leopard/dx/dsdt_lb.dsl b/src/mainboard/amd/serengeti_leopard/dx/dsdt_lb.dsl deleted file mode 100644 index 04ec830f08..0000000000 --- a/src/mainboard/amd/serengeti_leopard/dx/dsdt_lb.dsl +++ /dev/null @@ -1,212 +0,0 @@ -/* - * Copyright 2005 AMD - */ -DefinitionBlock ("DSDT.aml", "DSDT", 1, "AMD-K8", "AMDACPI", 100925440) -{ - Scope (_PR) - { - Processor (CPU0, 0x00, 0x0000C010, 0x06) {} - Processor (CPU1, 0x01, 0x00000000, 0x00) {} - Processor (CPU2, 0x02, 0x00000000, 0x00) {} - Processor (CPU3, 0x03, 0x00000000, 0x00) {} - - } - - Method (FWSO, 0, NotSerialized) { } - - Name (_S0, Package (0x04) { 0x00, 0x00, 0x00, 0x00 }) - Name (_S1, Package (0x04) { 0x01, 0x01, 0x01, 0x01 }) - Name (_S3, Package (0x04) { 0x05, 0x05, 0x05, 0x05 }) - Name (_S5, Package (0x04) { 0x07, 0x07, 0x07, 0x07 }) - - Scope (_SB) - { - Device (PCI0) - { - /* BUS0 root bus */ - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - External (CBST) - - - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00180000) - Name (_UID, 0x01) - - Name (HCIN, 0x00) // HC1 - - Method (_BBN, 0, NotSerialized) - { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, 0x0CF8, 0x0CF8, 0x01, 0x08) //CF8-CFFh - IO (Decode16, 0xC000, 0xC000, 0x01, 0x80) //8000h - IO (Decode16, 0xC080, 0xC080, 0x01, 0x80) //8080h - - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x8100, // Address Range Minimum - 0xFFFF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x7F00,,, - , TypeStatic) //8100h-FFFFh - - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x000C0000, // Address Range Minimum - 0x00000000, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x00000000,,, - , AddressRangeMemory, TypeStatic) //Video BIOS A0000h-C7FFFh - - Memory32Fixed (ReadWrite, 0x000D8000, 0x00004000)//USB HC D8000-DBFFF - - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x03AF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x03B0,,, - , TypeStatic) //0-CF7h - - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x03E0, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0918,,, - , TypeStatic) //0-CF7h - }) - \_SB.OSTP () - CreateDWordField (BUF0, 0x3E, VLEN) - CreateDWordField (BUF0, 0x36, VMAX) - CreateDWordField (BUF0, 0x32, VMIN) - ShiftLeft (VGA1, 0x09, Local0) - Add (VMIN, Local0, VMAX) - Decrement (VMAX) - Store (Local0, VLEN) - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - Include ("pci0_hc.asl") - - } - Device (PCI1) - { - Name (_HID, "PNP0A03") - Name (_ADR, 0x00000000) - Name (_UID, 0x02) - Method (_STA, 0, NotSerialized) - { - Return (\_SB.PCI0.CBST) - } - Name (_BBN, 0x00) - } - - - } - - Scope (_GPE) - { - Method (_L08, 0, NotSerialized) - { - Notify (\_SB.PCI0, 0x02) //PME# Wakeup - } - - Method (_L0F, 0, NotSerialized) - { - Notify (\_SB.PCI0.TP2P.USB0, 0x02) //USB Wakeup - } - - Method (_L22, 0, NotSerialized) // GPIO18 (LID) - Pogo 0 Bridge B - { - Notify (\_SB.PCI0.PG0B, 0x02) - } - - Method (_L29, 0, NotSerialized) // GPIO25 (Suspend) - Pogo 0 Bridge A - { - Notify (\_SB.PCI0.PG0A, 0x02) - } - } - - Method (_PTS, 1, NotSerialized) - { - Or (Arg0, 0xF0, Local0) - Store (Local0, DBG1) - } -/* - Method (_WAK, 1, NotSerialized) - { - Or (Arg0, 0xE0, Local0) - Store (Local0, DBG1) - } -*/ - Name (PICF, 0x00) //Flag Variable for PIC vs. I/O APIC Mode - Method (_PIC, 1, NotSerialized) //PIC Flag and Interface Method - { - Store (Arg0, PICF) - } - - OperationRegion (DEBG, SystemIO, 0x80, 0x01) - Field (DEBG, ByteAcc, Lock, Preserve) - { - DBG1, 8 - } - - OperationRegion (EXTM, SystemMemory, 0x000FF83C, 0x04) - Field (EXTM, WordAcc, Lock, Preserve) - { - AMEM, 32 - } - - OperationRegion (VGAM, SystemMemory, 0x000C0002, 0x01) - Field (VGAM, ByteAcc, Lock, Preserve) - { - VGA1, 8 - } - - OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100) - Field (GRAM, ByteAcc, Lock, Preserve) - { - Offset (0x10), - FLG0, 8 - } - - OperationRegion (GSTS, SystemIO, 0xC028, 0x02) - Field (GSTS, ByteAcc, NoLock, Preserve) - { - , 4, - IRQR, 1 - } - - OperationRegion (Z007, SystemIO, 0x21, 0x01) - Field (Z007, ByteAcc, NoLock, Preserve) - { - Z008, 8 - } - - OperationRegion (Z009, SystemIO, 0xA1, 0x01) - Field (Z009, ByteAcc, NoLock, Preserve) - { - Z00A, 8 - } - - Include ("amdk8_util.asl") - -} - diff --git a/src/mainboard/amd/serengeti_leopard/dx/pci0_hc.asl b/src/mainboard/amd/serengeti_leopard/dx/pci0_hc.asl deleted file mode 100644 index b1e9562f6b..0000000000 --- a/src/mainboard/amd/serengeti_leopard/dx/pci0_hc.asl +++ /dev/null @@ -1,2 +0,0 @@ - Include ("amd8111.asl") //real SB at first - Include ("amd8131.asl") diff --git a/src/mainboard/amd/serengeti_leopard/dx/pci1_hc.asl b/src/mainboard/amd/serengeti_leopard/dx/pci1_hc.asl deleted file mode 100644 index b1e9562f6b..0000000000 --- a/src/mainboard/amd/serengeti_leopard/dx/pci1_hc.asl +++ /dev/null @@ -1,2 +0,0 @@ - Include ("amd8111.asl") //real SB at first - Include ("amd8131.asl") diff --git a/src/mainboard/amd/serengeti_leopard/dx/pci2.asl b/src/mainboard/amd/serengeti_leopard/dx/pci2.asl deleted file mode 100644 index a62ba98333..0000000000 --- a/src/mainboard/amd/serengeti_leopard/dx/pci2.asl +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Copyright 2005 AMD - */ -DefinitionBlock ("SSDT2.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440) -{ - Scope (_SB) - { - External (DADD, MethodObj) - External (GHCE, MethodObj) - External (GHCN, MethodObj) - External (GHCL, MethodObj) - External (GHCD, MethodObj) - External (GNUS, MethodObj) - External (GIOR, MethodObj) - External (GMEM, MethodObj) - External (GWBN, MethodObj) - External (GBUS, MethodObj) - - External (PICF) - - External (\_SB.PCI0.LNKA, DeviceObj) - External (\_SB.PCI0.LNKB, DeviceObj) - External (\_SB.PCI0.LNKC, DeviceObj) - External (\_SB.PCI0.LNKD, DeviceObj) - - Device (PCI2) - { - - // BUS ? Second HT Chain - Name (HCIN, 0x01) // HC2 - - Name (_HID, "PNP0A03") - - Method (_ADR, 0, NotSerialized) //Fake bus should be 0 - { - Return (DADD(GHCN(HCIN), 0x00180000)) - } - - Name (_UID, 0x03) - - Method (_BBN, 0, NotSerialized) - { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - - Method (_STA, 0, NotSerialized) - { - Return (\_SB.GHCE(HCIN)) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { }) - Store( GHCN(HCIN), Local4) - Store( GHCL(HCIN), Local5) - - Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1) - Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2) - Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3) - Return (Local3) - } - - Include ("pci2_hc.asl") - } - } - -} - diff --git a/src/mainboard/amd/serengeti_leopard/dx/pci2_hc.asl b/src/mainboard/amd/serengeti_leopard/dx/pci2_hc.asl deleted file mode 100644 index 045d090392..0000000000 --- a/src/mainboard/amd/serengeti_leopard/dx/pci2_hc.asl +++ /dev/null @@ -1 +0,0 @@ - Include ("amd8151.asl") diff --git a/src/mainboard/amd/serengeti_leopard/dx/superio.asl b/src/mainboard/amd/serengeti_leopard/dx/superio.asl deleted file mode 100644 index 86a10a94ae..0000000000 --- a/src/mainboard/amd/serengeti_leopard/dx/superio.asl +++ /dev/null @@ -1 +0,0 @@ -// Include ("w83627hf.asl") diff --git a/src/mainboard/amd/serengeti_leopard/fadt.c b/src/mainboard/amd/serengeti_leopard/fadt.c deleted file mode 100644 index 3442082467..0000000000 --- a/src/mainboard/amd/serengeti_leopard/fadt.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - * (C) Copyright 2005 Stefan Reinauer <stepan@openbios.org> - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> - -extern unsigned pm_base; /* pm_base should be set in sb acpi */ - -void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ - - acpi_header_t *header=&(fadt->header); - - printk_debug("pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt,0,sizeof(acpi_fadt_t)); - memcpy(header->signature,"FACP",4); - header->length = 244; - header->revision = 1; - memcpy(header->oem_id,OEM_ID,6); - memcpy(header->oem_table_id,"LXBACPI ",8); - memcpy(header->asl_compiler_id,ASLC,4); - header->asl_compiler_revision=0; - - fadt->firmware_ctrl=(u32)facs; - fadt->dsdt= (u32)dsdt; - fadt->res1=0x0; - // 3=Workstation,4=Enterprise Server, 7=Performance Server - fadt->preferred_pm_profile=0x03; - fadt->sci_int=9; - // disable system management mode by setting to 0: - fadt->smi_cmd = 0;//pm_base+0x2f; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - fadt->pm1a_evt_blk = pm_base; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = pm_base+0x04; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = 0x0000; - fadt->pm_tmr_blk = pm_base+0x08; - fadt->gpe0_blk = pm_base+0x20; - fadt->gpe1_blk = pm_base+0xb0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 0; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 4; - fadt->gpe1_blk_len = 8; - fadt->gpe1_base = 16; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; // 0x7d these have to be - fadt->mon_alrm = 0; // 0x7e added to cmos.layout - fadt->century = 0; // 0x7f to make rtc alrm work - fadt->iapc_boot_arch = 0x3; // See table 5-11 - fadt->flags = 0x25; - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pm_base; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pm_base+4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = 0x0; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pm_base+0x08; - fadt->x_pm_tmr_blk.addrh = 0x0; - - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pm_base+0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 64; - fadt->x_gpe1_blk.bit_offset = 16; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = pm_base+0xb0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); - -} diff --git a/src/mainboard/amd/serengeti_leopard/failover.c b/src/mainboard/amd/serengeti_leopard/failover.c deleted file mode 100644 index 345d3f4d1a..0000000000 --- a/src/mainboard/amd/serengeti_leopard/failover.c +++ /dev/null @@ -1,90 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#if CONFIG_LOGICAL_CPUS==1 -#include "cpu/amd/dualcore/dualcore_id.c" -#else -#include "cpu/amd/model_fxx/node_id.c" -#endif - -static unsigned long main(unsigned long bist) -{ -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - /* Make cerain my local apic is useable */ -// enable_lapic(); - -#if CONFIG_LOGICAL_CPUS==1 - id = get_node_core_id_x(); - /* Is this a cpu only reset? */ - if (cpu_init_detected(id.nodeid)) { -#else -// nodeid = lapicid() & 0xf; - nodeid = get_node_id(); - /* Is this a cpu only reset? */ - if (cpu_init_detected(nodeid)) { -#endif - /* Is this a cpu only reset? */ - if (last_boot_normal()) { - goto normal_image; - } else { - goto cpu_reset; - } - } - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* Setup the 8111 */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - cpu_reset: -#if 0 - asm volatile ("jmp __cpu_reset" - : /* outputs */ - : "a"(bist) /* inputs */ - : /* clobbers */ - ); -#endif - fallback_image: - return bist; -} diff --git a/src/mainboard/amd/serengeti_leopard/get_bus_conf.c b/src/mainboard/amd/serengeti_leopard/get_bus_conf.c deleted file mode 100644 index 25a5a8ed46..0000000000 --- a/src/mainboard/amd/serengeti_leopard/get_bus_conf.c +++ /dev/null @@ -1,147 +0,0 @@ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 -#include <cpu/amd/dualcore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> - - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -unsigned char bus_isa = 7 ; -unsigned char bus_8132_0 = 1; -unsigned char bus_8132_1 = 2; -unsigned char bus_8132_2 = 3; -unsigned char bus_8111_0 = 1; -unsigned char bus_8111_1 = 4; -unsigned char bus_8151_0 = 5; -unsigned char bus_8151_1 = 6; -unsigned apicid_8111 ; -unsigned apicid_8132_1; -unsigned apicid_8132_2; - -static unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; -static unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -unsigned sbdn3; -unsigned sbdn5; - -extern void get_sblk_pci1234(void); - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - device_t dev; - int i; - - if(get_bus_conf_done==1) return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]); - for(i=0;i<sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - sbdn3 = sysconf.hcdn[0] & 0xff; - sbdn5 = sysconf.hcdn[1] & 0xff; - - bus_8132_0 = (sysconf.pci1234[0] >> 16) & 0xff; - bus_8111_0 = bus_8132_0; - - /* 8111 */ - dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); - if (dev) { - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); -#endif - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_8111_0, sysconf.sbdn); - } - - /* 8132-1 */ - dev = dev_find_slot(bus_8132_0, PCI_DEVFN(sbdn3,0)); - if (dev) { - bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_8132_0, sbdn3); - } - - /* 8132-2 */ - dev = dev_find_slot(bus_8132_0, PCI_DEVFN(sbdn3+1,0)); - if (dev) { - bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); -#endif - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_8132_0, sbdn3+1); - } - - /* HT chain 1 */ - if((sysconf.pci1234[1] & 0x1) == 1) { - bus_8151_0 = (sysconf.pci1234[1] >> 16) & 0xff; - /* 8151 */ - dev = dev_find_slot(bus_8151_0, PCI_DEVFN(sbdn5+1, 0)); - - if (dev) { - bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -// printk_debug("bus_8151_1=%d\n",bus_8151_1); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_8151_0, sbdn5+1); - } - } - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 - apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_8111 = apicid_base+0; - apicid_8132_1 = apicid_base+1; - apicid_8132_2 = apicid_base+2; -} diff --git a/src/mainboard/amd/serengeti_leopard/irq_tables.c b/src/mainboard/amd/serengeti_leopard/irq_tables.c deleted file mode 100644 index 0f5887becb..0000000000 --- a/src/mainboard/amd/serengeti_leopard/irq_tables.c +++ /dev/null @@ -1,114 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_8132_0; -extern unsigned char bus_8132_1; -extern unsigned char bus_8132_2; -extern unsigned char bus_8111_0; -extern unsigned char bus_8111_1; -extern unsigned char bus_8151_0; -extern unsigned char bus_8151_1; - -extern unsigned sbdn3; -extern unsigned sbdn5; - -extern void get_bus_conf(void); - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum=0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_8111_0; - pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1022; - pirq->rtr_device = 0x746b; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; -//pcix bridge -// write_pirq_info(pirq_info, bus_8132_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); -// pirq_info++; slot_num++; - - if(sysconf.pci1234[1] & 0xf) { - //agp bridge - write_pirq_info(pirq_info, bus_8151_0, (sbdn5<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - } - - pirq_info++; slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk_info("done.\n"); - - return (unsigned long) pirq_info; - -} diff --git a/src/mainboard/amd/serengeti_leopard/license.txt b/src/mainboard/amd/serengeti_leopard/license.txt deleted file mode 100644 index 8993902d3e..0000000000 --- a/src/mainboard/amd/serengeti_leopard/license.txt +++ /dev/null @@ -1,32 +0,0 @@ -*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -code in this dir diff --git a/src/mainboard/amd/serengeti_leopard/mainboard.c b/src/mainboard/amd/serengeti_leopard/mainboard.c deleted file mode 100644 index 2002bd14de..0000000000 --- a/src/mainboard/amd/serengeti_leopard/mainboard.c +++ /dev/null @@ -1,9 +0,0 @@ -#include <device/device.h> -#include "chip.h" - -#if CONFIG_CHIP_NAME == 1 -struct chip_operations mainboard_amd_serengeti_leopard_ops = { - CHIP_NAME("AMD Serengeti Leopard Mainboard") -}; -#endif - diff --git a/src/mainboard/amd/serengeti_leopard/mptable.c b/src/mainboard/amd/serengeti_leopard/mptable.c deleted file mode 100644 index 5d2ed74f7f..0000000000 --- a/src/mainboard/amd/serengeti_leopard/mptable.c +++ /dev/null @@ -1,156 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 -#include <cpu/amd/dualcore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_isa; -extern unsigned char bus_8132_0; -extern unsigned char bus_8132_1; -extern unsigned char bus_8132_2; -extern unsigned char bus_8111_0; -extern unsigned char bus_8111_1; -extern unsigned char bus_8151_0; -extern unsigned char bus_8151_1; -extern unsigned apicid_8111; -extern unsigned apicid_8132_1; -extern unsigned apicid_8132_2; - -extern unsigned sbdn3; -extern unsigned sbdn5; - -extern void get_bus_conf(void); - -void *smp_write_config_table(void *v) -{ - static const char sig[4] = "PCMP"; - static const char oem[8] = "AMD "; - static const char productid[12] = "SERENGETI "; - struct mp_config_table *mc; - - unsigned char bus_num; - int i; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - memset(mc, 0, sizeof(*mc)); - - memcpy(mc->mpc_signature, sig, sizeof(sig)); - mc->mpc_length = sizeof(*mc); /* initially just the header */ - mc->mpc_spec = 0x04; - mc->mpc_checksum = 0; /* not yet computed */ - memcpy(mc->mpc_oem, oem, sizeof(oem)); - memcpy(mc->mpc_productid, productid, sizeof(productid)); - mc->mpc_oemptr = 0; - mc->mpc_oemsize = 0; - mc->mpc_entry_count = 0; /* No entries yet... */ - mc->mpc_lapic = LAPIC_ADDR; - mc->mpe_length = 0; - mc->mpe_checksum = 0; - mc->reserved = 0; - - smp_write_processors(mc); - - get_bus_conf(); - -/*Bus: Bus ID Type*/ - /* define bus and isa numbers */ - for(bus_num = 0; bus_num < bus_isa; bus_num++) { - smp_write_bus(mc, bus_num, "PCI "); - } - smp_write_bus(mc, bus_isa, "ISA "); - -/*I/O APICs: APIC ID Version State Address*/ - smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); //8111 - { - device_t dev; - struct resource *res; - dev = dev_find_slot(bus_8132_0, PCI_DEVFN(sbdn3, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, apicid_8132_1, 0x11, res->base); - } - } - dev = dev_find_slot(bus_8132_0, PCI_DEVFN(sbdn3+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, apicid_8132_2, 0x11, res->base); - } - } - } - -/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# -*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_8111, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid_8111, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x5, apicid_8111, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, apicid_8111, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, apicid_8111, 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, apicid_8111, 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x9, apicid_8111, 0x9); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid_8111, 0xc); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); -//??? What - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|3, apicid_8111, 0x13); - -// Onboard AMD USB - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); - - if(sysconf.pci1234[1] & 0xf) { - // Slot AGP - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, apicid_8111, 0x11); - } - -//Slot 3 PCI 32 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|i, apicid_8111, 0x10 + (1+i)%4); //16 - } - - -//Slot 4 PCI 32 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|i, apicid_8111, 0x10 + (0+i)%4); //16 - } - - -//Slot 1 PCI-X 133/100/66 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8132_2, (1<<2)|i, apicid_8132_2, (0+i)%4); // - } - - -//Slot 2 PCI-X 133/100/66 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8132_1, (1<<2)|i, apicid_8132_1, (1+i)%4); //25 - } - - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); - smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); - mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", - mc, smp_next_mpe_entry(mc)); - return smp_next_mpe_entry(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/amd/serengeti_leopard/readme_acpi.txt b/src/mainboard/amd/serengeti_leopard/readme_acpi.txt deleted file mode 100644 index 2fb327daec..0000000000 --- a/src/mainboard/amd/serengeti_leopard/readme_acpi.txt +++ /dev/null @@ -1,30 +0,0 @@ -At this time, For acpi support We got -1. support AMK K8 SRAT --- dynamically (LinuxBIOS run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c) -2. support MADT ---- dynamically (LinuxBIOS run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c , src/mainboard/amd/serengeti_cheetah/acpi_tables.c) -3. support DSDT ---- dynamically (Compile time, LinuxBIOS run-time, ACPI run-time) (src/mainboard/amd/serengeti_cheetah/{dx/*, get_bus_conf.c}, src/northbridge/amd/amdk8/get_sblk_pci1234.c) -4. Chipset support: amd8111, amd8132 - -The developers need to change for different MB - -Change dx/dsdt_lb.dsl, according to MB layout - pci1, pci2, pci3, pci4, ...., pci8 - if there is HT-IO board, may use pci2.asl.... to create ssdt2.c, and ssdt3,c and ssdt4.c, ....ssdt8.c - -Change acpi_tables.c - sbdn: Real SB device Num. for 8111 =3 or 1 depend if 8131 presents. ---- Actually you don't need to change it, it is LinuxBIOS run-time configurable now. - if there is HT-IO board, need to adjust SSDTX_NUM...., and preset pci1234 array. acpi_tables.c will decide to put the SSDT on the RSDT or not according if the HT-IO board is installed - -Regarding pci bridge apic and pic - need to modify entries amd8111.asl and amd8131.asl and amd8151.asl.... acording to your MB laybout, it is like that in mptable.c - -About other chipsets, need to develop their special asl such as - ck804.asl --- NB ck804 - bcm5785.asl or bcm5780.asl ---- Serverworks HT1000/HT2000 - -use a to create hex file -use c to delele hex file - -yhlu - -09/18/2005 - diff --git a/src/mainboard/amd/serengeti_leopard/reset.c b/src/mainboard/amd/serengeti_leopard/reset.c deleted file mode 100644 index 3db3956ec6..0000000000 --- a/src/mainboard/amd/serengeti_leopard/reset.c +++ /dev/null @@ -1,6 +0,0 @@ -#include "../../../southbridge/amd/amd8111/amd8111_reset.c" - -void hard_reset(void) -{ - amd8111_hard_reset(0, 0); -} diff --git a/src/mainboard/amd/serengeti_leopard/resourcemap.c b/src/mainboard/amd/serengeti_leopard/resourcemap.c deleted file mode 100644 index 7d2a7ece28..0000000000 --- a/src/mainboard/amd/serengeti_leopard/resourcemap.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * AMD serengeti_leopard needs a different resource map - * - */ - -static void setup_serengeti_leopard_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x08070013, // AMD 8151 on link0 of CPU 1 - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = sizeof(register_values)/sizeof(register_values[0]); - setup_resource_map(register_values, max); -} - diff --git a/src/mainboard/amd/serengeti_leopard/ssdt_lb_x.dsl b/src/mainboard/amd/serengeti_leopard/ssdt_lb_x.dsl deleted file mode 100644 index 7e835b6632..0000000000 --- a/src/mainboard/amd/serengeti_leopard/ssdt_lb_x.dsl +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright 2005 AMD - */ -DefinitionBlock ("SSDT.aml", "SSDT", 1, "AMD-K8", "AMD-ACPI", 100925440) -{ - /* - * These objects were referenced but not defined in this table - */ - External (\_SB_.PCI0, DeviceObj) - - Scope (\_SB.PCI0) - { - Name (BUSN, Package (0x04) - { - 0x11111111, - 0x22222222, - 0x33333333, - 0x44444444 - }) - Name (MMIO, Package (0x10) - { - 0x11111111, - 0x22222222, - 0x33333333, - 0x44444444, - 0x55555555, - 0x66666666, - 0x77777777, - 0x88888888, - 0x99999999, - 0xaaaaaaaa, - 0xbbbbbbbb, - 0xcccccccc, - 0xdddddddd, - 0xeeeeeeee, - 0x11111111, - 0x22222222 - }) - Name (PCIO, Package (0x08) - { - 0x77777777, - 0x88888888, - 0x99999999, - 0xaaaaaaaa, - 0xbbbbbbbb, - 0xcccccccc, - 0xdddddddd, - 0xeeeeeeee - }) - Name (SBLK, 0x11) - Name (TOM1, 0xaaaaaaaa) - Name (SBDN, 0xbbbbbbbb) - Name (HCLK, Package (0x08) - { - 0x11111111, - 0x22222222, - 0x33333333, - 0x44444444, - 0x55555555, - 0x66666666, - 0x77777777, - 0x88888888 - }) - Name (HCDN, Package (0x08) - { - 0x11111111, - 0x22222222, - 0x33333333, - 0x44444444, - 0x55555555, - 0x66666666, - 0x77777777, - 0x88888888 - }) - } -} - diff --git a/src/mainboard/amd/solo/Config.lb b/src/mainboard/amd/solo/Config.lb deleted file mode 100644 index f7efc861ad..0000000000 --- a/src/mainboard/amd/solo/Config.lb +++ /dev/null @@ -1,221 +0,0 @@ -## -## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end - -## -## Compute the start location and size size of -## The linuxBIOS bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of linuxBIOS will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up linuxBIOS, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=65536 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end -if HAVE_ACPI_TABLES object acpi_tables.o end -#object reset.o - -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end - -## -## Build our 16 bit and 32 bit linuxBIOS entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where linuxBIOS is entered) -## -if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -### -### This is the early phase of linuxBIOS startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc - -## -## Include the secondary Configuration files -## -dir /pc80 -config chip.h - -# sample config for arima/hdama -chip northbridge/amd/amdk8/root_complex - device pci_domain 0 on - chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge - # devices on link 0, link 0 == LDT 0 - chip southbridge/amd/amd8151 - # the on/off keyword is mandatory - device pci 0.0 on end - device pci 1.0 on end - end - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 on end - device pci 1.0 off end - end - device pci 1.0 on - chip superio/nsc/pc87360 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.7 off end # GPIO - device pnp 2e.8 off end # ACB - device pnp 2e.9 off end # FSCM - device pnp 2e.a off end # WDT - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on - chip drivers/generic/generic - #phillips pca9545 smbus mux - device i2c 70 on - # analog_devices adm1026 - chip drivers/generic/generic - device i2c 2c on end - end - end - device i2c 70 on end - device i2c 70 on end - device i2c 70 on end - end - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end - device pci 1.5 off end - device pci 1.6 on end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - - device pci 18.0 on end # LDT1 - device pci 18.0 on end # LDT2 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end - device apic_cluster 0 on - chip cpu/amd/socket_754 - device apic 0 on end - end - end -end - diff --git a/src/mainboard/amd/solo/Options.lb b/src/mainboard/amd/solo/Options.lb deleted file mode 100644 index beef9278c2..0000000000 --- a/src/mainboard/amd/solo/Options.lb +++ /dev/null @@ -1,209 +0,0 @@ -uses HAVE_MP_TABLE -uses HAVE_ACPI_TABLES -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_MAX_PHYSICAL_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_ROM_PAYLOAD_START -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses LINUXBIOS_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_SERIAL8250 -uses CROSS_COMPILE -uses CC -uses HOSTCC -uses OBJCOPY - -uses CONFIG_USE_INIT - - -### -### Build options -### - -## -## ROM_SIZE is the size of boot ROM that this board will use. -## -default ROM_SIZE=524288 - -## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use -## -default FALLBACK_SIZE=0x40000 - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=9 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default HAVE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=1 - -## -## Move the default LinuxBIOS cmos range off of AMD RTC registers -## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=1 -default CONFIG_MAX_PHYSICAL_CPUS=1 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default MAINBOARD_PART_NUMBER="SOLO" -default MAINBOARD_VENDOR="AMD" - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE - -## -## LinuxBIOS C code runs at this location in RAM -## -default _RAMBASE=0x00004000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD = 1 - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CROSS_COMPILE="" -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 - -# Select the serial console base port -default TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 - -## -### Select the linuxBIOS loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 - -## -## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -### End Options.lb -end diff --git a/src/mainboard/amd/solo/acpi_tables.c b/src/mainboard/amd/solo/acpi_tables.c deleted file mode 100644 index 9c2aeadd2d..0000000000 --- a/src/mainboard/amd/solo/acpi_tables.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * LinuxBIOS ACPI support for AMD Solo - * written by Stefan Reinauer <stepan@openbios.org> - * (C) 2005 Stefan Reinauer - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <device/pci.h> - - -unsigned long acpi_dump_apics(unsigned long current) -{ -#define IO_APIC_ADDR 0xfec00000UL - /* create all subtables for 1p */ - current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 0); - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, 2, - IO_APIC_ADDR); - current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) - current, 0, 0, 2, 1 /* active high */); - current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xf /* active low, level triggered */); - current += acpi_create_madt_lapic_nmi( (acpi_madt_lapic_nmi_t *) - current, 0, 5, 1); - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - - /* Align ACPI tables to 16byte */ - start = ( start + 0x0f ) & -0x10; - current = start; - - printk_info("ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - printk_debug("ACPI: * HPET\n"); - - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdt,hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - printk_debug("ACPI: * MADT\n"); - - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current+=madt->header.length; - acpi_add_table(rsdt,madt); - -#ifdef HAVE_ACPI_FADT - printk_debug("ACPI: * FACS\n"); - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - - dsdt = (acpi_header_t *)current; - current += ((acpi_header_t *)AmlCode)->length; - memcpy((void *)dsdt,(void *)AmlCode, ((acpi_header_t *)AmlCode)->length); - dsdt->checksum = 0; // don't trust intel iasl compiler to get this right - dsdt->checksum = acpi_checksum(dsdt,dsdt->length); - printk_debug("ACPI: * DSDT @ %08x Length %x\n",dsdt,dsdt->length); - printk_debug("ACPI: * FADT\n"); - - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt,facs,dsdt); - acpi_add_table(rsdt,fadt); -#endif - - printk_info("ACPI: done.\n"); - return current; -} - diff --git a/src/mainboard/amd/solo/auto.c b/src/mainboard/amd/solo/auto.c deleted file mode 100644 index 34a79cb514..0000000000 --- a/src/mainboard/amd/solo/auto.c +++ /dev/null @@ -1,152 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <arch/cpu.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" -#include "southbridge/amd/amd8111/amd8111_early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <cpu/amd/model_fxx_rev.h> -#include "superio/nsc/pc87360/pc87360_early_serial.c" -#include "cpu/amd/mtrr/amd_earlymtrr.c" -#include "cpu/x86/bist.h" - -#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) - -static void hard_reset(void) -{ - set_bios_reset(); - - /* enable cf9 */ - pci_write_config8(PCI_DEV(0, 0x05, 3), 0x41, 0xf1); - /* reset */ - outb(0x0e, 0x0cf9); -} - -static void soft_reset(void) -{ - set_bios_reset(); - pci_write_config8(PCI_DEV(0, 0x05, 0), 0x47, 1); -} - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low */ - outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | - (0 << 0), SMBUS_IO_BASE + 0xc0 + 28); - /* Ensure the BIOS has control of the memory lines */ - outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | - (0 << 0), SMBUS_IO_BASE + 0xc0 + 29); - } else { - /* Ensure the CPU has controll of the memory lines */ - outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | - (1 << 0), SMBUS_IO_BASE + 0xc0 + 29); - } -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset_high */ - outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | - (1 << 0), SMBUS_IO_BASE + 0xc0 + 28); - udelay(90); - } -} - -static unsigned int generate_row(uint8_t node, uint8_t row, - uint8_t maxnodes) -{ - /* since the AMD Solo is a UP only machine, we can - * always return the default row entry value - */ - return 0x00010101; /* default row entry */ -} - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - /* nothing to do */ -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "sdram/generic_sdram.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -static void main(unsigned long bist) -{ - static const struct mem_controller cpu[] = { - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = {(0xa << 3) | 0, (0xa << 3) | 1, 0, 0}, - .channel1 = {0, 0, 0, 0}, - } - }; - - int needs_reset; - unsigned nodeid; - - if (bist == 0) { - k8_init_and_stop_secondaries(); - } - - /* Setup the console */ - pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_default_resource_map(); - needs_reset = setup_coherent_ht_domain(); - needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } - -#if 0 - print_pci_devices(); -#endif - enable_smbus(); -#if 0 - dump_spd_registers(&cpu[0]); -#endif - - memreset_setup(); - sdram_initialize(sizeof(cpu) / sizeof(cpu[0]), cpu); - -#if 0 - dump_pci_devices(); - dump_pci_device(PCI_DEV(0, 0x18, 2)); - - /* Check the first 1M */ - ram_check(0x00000000, 0x000100000); -#endif -} diff --git a/src/mainboard/amd/solo/chip.h b/src/mainboard/amd/solo/chip.h deleted file mode 100644 index 941c656e2e..0000000000 --- a/src/mainboard/amd/solo/chip.h +++ /dev/null @@ -1,5 +0,0 @@ -extern struct chip_operations mainboard_amd_solo_ops; - -struct mainboard_amd_solo_config { - int nothing; -}; diff --git a/src/mainboard/amd/solo/cmos.layout b/src/mainboard/amd/solo/cmos.layout deleted file mode 100644 index 5eb88b9a5a..0000000000 --- a/src/mainboard/amd/solo/cmos.layout +++ /dev/null @@ -1,98 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 dual_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 reserved_memory - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 - - diff --git a/src/mainboard/amd/solo/failover.c b/src/mainboard/amd/solo/failover.c deleted file mode 100644 index 1738e908d9..0000000000 --- a/src/mainboard/amd/solo/failover.c +++ /dev/null @@ -1,68 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "pc80/mc146818rtc_early.c" -#include "southbridge/amd/amd8111/amd8111_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "northbridge/amd/amdk8/reset_test.c" - -static unsigned long main(unsigned long bist) -{ - unsigned nodeid; - - /* Make cerain my local apic is useable */ - enable_lapic(); - - nodeid = lapicid() & 0xf; - - /* Is this a cpu only reset? */ - if (early_mtrr_init_detected()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { - goto normal_image; - } else { - goto fallback_image; - } - } - - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* Setup the 8111 */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -} diff --git a/src/mainboard/amd/solo/irq_tables.c b/src/mainboard/amd/solo/irq_tables.c deleted file mode 100644 index 783d8bd7b8..0000000000 --- a/src/mainboard/amd/solo/irq_tables.c +++ /dev/null @@ -1,59 +0,0 @@ -#include <arch/pirq_routing.h> -#include <device/pci.h> - -#define IRQ_ROUTER_BUS 1 -#define IRQ_ROUTER_DEVFN PCI_DEVFN(5,0) -#define IRQ_ROUTER_VENDOR 0x1022 -#define IRQ_ROUTER_DEVICE 0x7468 -#define IRQS_EXCLUSIVE 0x0c20 -#define IRQS_AVAILABLE 0xdeb8 - - -#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \ - { bus, (dev<<3)|fn, {{ linka, IRQS_AVAILABLE}, { linkb, IRQS_AVAILABLE}, \ - {linkc, IRQS_AVAILABLE}, {linkd, IRQS_AVAILABLE}}, slot, 0} - -/* Each IRQ_SLOT entry consists of: - * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu - */ - -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * IRQ_SLOT_COUNT, /* there can be total IRQ_SLOT_COUNT - * devices on the bus */ - IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */ - IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */ - IRQS_EXCLUSIVE, /* IRQs devoted exclusively to PCI usage */ - IRQ_ROUTER_VENDOR, /* Vendor */ - IRQ_ROUTER_DEVICE, /* Device */ - 0x00, /* Crap (miniport) */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x00, /* u8 checksum , mod 256 checksum must give - * zero, will be corrected later - */ - { - - /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */ - - /* PCI SLOT 1-4 */ - IRQ_SLOT(1, 3, 4, 0, 1, 2, 3, 4), - IRQ_SLOT(2, 3, 5, 0, 2, 3, 4, 1), - IRQ_SLOT(3, 3, 6, 0, 3, 4, 1, 2), - IRQ_SLOT(4, 3, 7, 0, 4, 1, 2, 3), - - /* Builtin Devices */ - IRQ_SLOT(0, 3, 0, 0, 4, 4, 4, 4), /* USB */ - IRQ_SLOT(0, 1, 5, 1, 1, 2, 3, 4), /* IDE */ - IRQ_SLOT(0, 1, 2, 0, 1, 2, 3, 4), /* AGP Bridge */ - - /* Let Linux know about bus 1 */ - IRQ_SLOT(0, 1, 5, 0, 0, 0, 0, 0), - - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr); -} diff --git a/src/mainboard/amd/solo/mainboard.c b/src/mainboard/amd/solo/mainboard.c deleted file mode 100644 index 4c482402c1..0000000000 --- a/src/mainboard/amd/solo/mainboard.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <device/device.h> -#include "chip.h" - -struct chip_operations mainboard_amd_solo_ops = { - CHIP_NAME("AMD Solo7 Mainboard") -}; - diff --git a/src/mainboard/amd/solo/mptable.c b/src/mainboard/amd/solo/mptable.c deleted file mode 100644 index a21a49489b..0000000000 --- a/src/mainboard/amd/solo/mptable.c +++ /dev/null @@ -1,241 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -void *smp_write_config_table(void *v) -{ - static const char sig[4] = "PCMP"; - static const char oem[8] = "AMD "; - static const char productid[12] = "SOLO7 "; - struct mp_config_table *mc; - unsigned char bus_num; - unsigned char bus_isa; - unsigned char bus_8151_1; - unsigned char bus_8111_1; - - mc = (void *) (((char *) v) + SMP_FLOATING_TABLE_LEN); - memset(mc, 0, sizeof(*mc)); - - memcpy(mc->mpc_signature, sig, sizeof(sig)); - mc->mpc_length = sizeof(*mc); /* initially just the header */ - mc->mpc_spec = 0x04; - mc->mpc_checksum = 0; /* not yet computed */ - memcpy(mc->mpc_oem, oem, sizeof(oem)); - memcpy(mc->mpc_productid, productid, sizeof(productid)); - mc->mpc_oemptr = 0; - mc->mpc_oemsize = 0; - mc->mpc_entry_count = 0; /* No entries yet... */ - mc->mpc_lapic = LAPIC_ADDR; - mc->mpe_length = 0; - mc->mpe_checksum = 0; - mc->reserved = 0; - - smp_write_processors(mc); - - { - device_t dev; - - printk_info("creating mp table...\n"); - - /* 8111 */ - dev = dev_find_slot(1, PCI_DEVFN(0x04, 0)); - if (dev) { - bus_8111_1 = - pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = - pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - printk_debug(" mptable: 8111 PCI bus %d\n", - bus_8111_1); - printk_debug(" mptable: 8111 ISA bus %d\n", - bus_isa); - } else { - printk_debug - ("ERROR - could not find 8111 at PCI 1:04.0, using defaults\n"); - - bus_8111_1 = 3; - bus_isa = 4; - } - /* 8151-1 */ - dev = dev_find_slot(1, PCI_DEVFN(0x01, 0)); - if (dev) { - bus_8151_1 = - pci_read_config8(dev, PCI_SECONDARY_BUS); - printk_debug(" mptable: 8151 PCI bus %d\n", - bus_8151_1); - } else { - printk_debug - ("ERROR - could not find 8151 at PCI 1:01.0, using defaults\n"); - - bus_8151_1 = 2; - } - } - - /* define bus and isa numbers */ - for (bus_num = 0; bus_num < bus_isa; bus_num++) { - smp_write_bus(mc, bus_num, "PCI "); - } - smp_write_bus(mc, bus_isa, "ISA "); - - /* IOAPIC handling */ - - smp_write_ioapic(mc, 2, 0x11, 0xfec00000); - - /* ISA backward compatibility interrupts */ - smp_write_intsrc(mc, mp_ExtINT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x00, 0x02, 0x00); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x01, 0x02, 0x01); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x00, 0x02, 0x02); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x03, 0x02, 0x03); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x04, 0x02, 0x04); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x05, 0x02, 0x05); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x06, 0x02, 0x06); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x07, 0x02, 0x07); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x08, 0x02, 0x08); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x09, 0x02, 0x09); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x0a, 0x02, 0x0a); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x0b, 0x02, 0x0b); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x0c, 0x02, 0x0c); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x0d, 0x02, 0x0d); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x0e, 0x02, 0x0e); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x0f, 0x02, 0x0f); - - /* Standard local interrupt assignments */ - smp_write_lintsrc(mc, mp_ExtINT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x00, MP_APIC_ALL, 0x00); - smp_write_lintsrc(mc, mp_NMI, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_isa, 0x00, MP_APIC_ALL, 0x01); - - - /* AGP Slot */ - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8151_1, (0 << 2) | 0, 0x02, 0x10); - - /* PCI Slot 1 */ -#warning "FIXME get the irqs right, it's just hacked to work for now" - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (4 << 2) | 0, 0x02, 0x10); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (4 << 2) | 1, 0x02, 0x11); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (4 << 2) | 2, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (4 << 2) | 3, 0x02, 0x13); - - - /* PCI Slot 2 */ -#warning "FIXME get the irqs right, it's just hacked to work for now" - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (5 << 2) | 0, 0x02, 0x11); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (5 << 2) | 1, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (5 << 2) | 2, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (5 << 2) | 3, 0x02, 0x10); - - - /* PCI Slot 3 */ -#warning "FIXME get the irqs right, it's just hacked to work for now" - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (6 << 2) | 0, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (6 << 2) | 1, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (6 << 2) | 2, 0x02, 0x10); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (6 << 2) | 3, 0x02, 0x11); - - /* PCI Slot 4 */ -#warning "FIXME get the irqs right, it's just hacked to work for now" - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (7 << 2) | 0, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (7 << 2) | 1, 0x02, 0x10); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (7 << 2) | 2, 0x02, 0x11); - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - bus_8111_1, (7 << 2) | 3, 0x02, 0x12); - - /* Local devices */ - - /* USB */ - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_8111_1, (0 << 2) | 3, 0x02, 0x13); - /* Sound */ - smp_write_intsrc(mc, mp_INT, - MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, - 1, (5 << 2) | 1, 0x02, 0x11); - - - /* There is no extension information... */ - - /* Compute the checksums */ - mc->mpe_checksum = - smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); - - mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", - mc, smp_next_mpe_entry(mc)); - return smp_next_mpe_entry(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr); - return (unsigned long) smp_write_config_table(v); -} diff --git a/src/mainboard/amd/solo/reset.c b/src/mainboard/amd/solo/reset.c deleted file mode 100644 index 3db3956ec6..0000000000 --- a/src/mainboard/amd/solo/reset.c +++ /dev/null @@ -1,6 +0,0 @@ -#include "../../../southbridge/amd/amd8111/amd8111_reset.c" - -void hard_reset(void) -{ - amd8111_hard_reset(0, 0); -} diff --git a/targets/amd/quartet/Config-abuild.lb b/targets/amd/quartet/Config-abuild.lb deleted file mode 100644 index 0034d9bb6b..0000000000 --- a/targets/amd/quartet/Config-abuild.lb +++ /dev/null @@ -1,28 +0,0 @@ -# This will make a target directory of ./VENDOR_MAINBOARD - -target VENDOR_MAINBOARD -mainboard VENDOR/MAINBOARD - -option CC="CROSSCC" -option CROSS_COMPILE="CROSS_PREFIX" -option HOSTCC="CROSS_HOSTCC" - -__COMPRESSION__ - -option ROM_SIZE=512*1024 - - -romimage "normal" - option USE_FALLBACK_IMAGE=0 - option ROM_IMAGE_SIZE=0x20000 - option LINUXBIOS_EXTRA_VERSION=".0-normal" - payload PAYLOAD -end - -romimage "fallback" - option USE_FALLBACK_IMAGE=1 - option ROM_IMAGE_SIZE=0x20000 - option LINUXBIOS_EXTRA_VERSION=".0-fallback" - payload PAYLOAD -end -buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" diff --git a/targets/amd/quartet/Config.lb b/targets/amd/quartet/Config.lb deleted file mode 100644 index 0930d6b1d4..0000000000 --- a/targets/amd/quartet/Config.lb +++ /dev/null @@ -1,20 +0,0 @@ -# AMD Quartet - -target quartet -mainboard amd/quartet - -romimage "normal" - option USE_FALLBACK_IMAGE=0 - option ROM_IMAGE_SIZE=0x20000 - option LINUXBIOS_EXTRA_VERSION=".0-Normal" - payload ../../../payloads/tg3--ide_disk.zelf -end - -romimage "fallback" - option USE_FALLBACK_IMAGE=1 - option ROM_IMAGE_SIZE=0x20000 - option LINUXBIOS_EXTRA_VERSION=".0-Fallback" - payload ../../../payloads/tg3--ide_disk.zelf -end - -buildrom ./quartet.rom ROM_SIZE "normal" "fallback" diff --git a/targets/amd/serenade/Config.lb b/targets/amd/serenade/Config.lb deleted file mode 100644 index b1d400c311..0000000000 --- a/targets/amd/serenade/Config.lb +++ /dev/null @@ -1,20 +0,0 @@ -# AMD Serenade - -target serenade -mainboard amd/serenade - -romimage "normal" - option USE_FALLBACK_IMAGE=0 - option ROM_IMAGE_SIZE=0x20000 - option LINUXBIOS_EXTRA_VERSION=".0-Normal" - payload /home/ollie/work/filo-0.4.1/filo.elf -end - -romimage "fallback" - option USE_FALLBACK_IMAGE=1 - option ROM_IMAGE_SIZE=0x20000 - option LINUXBIOS_EXTRA_VERSION=".0-Fallback" - payload /home/ollie/work/filo-0.4.1/filo.elf -end - -buildrom ./serenade.rom ROM_SIZE "normal" "fallback" diff --git a/targets/amd/serengeti_leopard/Config.lb b/targets/amd/serengeti_leopard/Config.lb deleted file mode 100644 index 073a5d9857..0000000000 --- a/targets/amd/serengeti_leopard/Config.lb +++ /dev/null @@ -1,77 +0,0 @@ -# Sample config file for -# the amd serengeti_leopard -# This will make a target directory of ./serengeti_leopard - -target serengeti_leopard -mainboard amd/serengeti_leopard - -# serengeti_leopard -romimage "normal" -# 48K for SCSI FW -# option ROM_SIZE = 475136 -# 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 -# 64K for Etherboot -# option ROM_SIZE = 458752 - option USE_FAILOVER_IMAGE=0 - option USE_FALLBACK_IMAGE=0 -# option ROM_IMAGE_SIZE=0x13800 -# option ROM_IMAGE_SIZE=0x17800 -# option ROM_IMAGE_SIZE=0x15800 - option ROM_IMAGE_SIZE=0x20000 - option XIP_ROM_SIZE=0x20000 - option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" -# payload ../../../payloads/tg3--ide_disk.zelf -# payload ../../../payloads/filo.elf -# payload ../../../payloads/filo_mem.elf -# payload ../../../payloads/filo.zelf -# payload ../../../payloads/tg3--filo_hda2.zelf -# payload ../../../payloads/tg3.zelf -# payload ../../../payloads/tg3_vga.zelf -# payload ../../../../payloads/tg3--filo_hda2_vga.zelf - payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf -# payload ../../../payloads/tg3_com2.zelf -# payload ../../../payloads/e1000--filo.zelf -# payload ../../../payloads/tg3--e1000--filo.zelf -# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf -# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf -# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf -end - -romimage "fallback" - option USE_FAILOVER_IMAGE=0 - option USE_FALLBACK_IMAGE=1 -# option ROM_IMAGE_SIZE=0x13800 -# option ROM_IMAGE_SIZE=0x17800 -# option ROM_IMAGE_SIZE=0x15800 - option ROM_IMAGE_SIZE=0x20000 - option XIP_ROM_SIZE=0x20000 - option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" -# payload ../../../payloads/tg3--ide_disk.zelf -# payload ../../../payloads/filo.elf -# payload ../../../payloads/filo_mem.elf -# payload ../../../payloads/filo.zelf -# payload ../../../payloads/tg3--filo_hda2.zelf -# payload ../../../payloads/tg3.zelf -# payload ../../../payloads/tg3_vga.zelf - payload ../../../../payloads/memtest -# payload ../../../../payloads/tg3--filo_hda2_vga.zelf -# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf -# payload ../../../payloads/tg3_com2.zelf -# payload ../../../payloads/e1000--filo.zelf -# payload ../../../payloads/tg3--e1000--filo.zelf -# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf -# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf -# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf -end - -romimage "failover" - option USE_FAILOVER_IMAGE=1 - option USE_FALLBACK_IMAGE=0 - option ROM_IMAGE_SIZE=FAILOVER_SIZE - option XIP_ROM_SIZE=FAILOVER_SIZE - option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover" -end - -buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" "failover" -#buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" diff --git a/targets/amd/serengeti_leopard/VERSION b/targets/amd/serengeti_leopard/VERSION deleted file mode 100644 index 980a8810bc..0000000000 --- a/targets/amd/serengeti_leopard/VERSION +++ /dev/null @@ -1 +0,0 @@ -_serengenti_leopard diff --git a/targets/amd/solo/Config-8MBit.lb b/targets/amd/solo/Config-8MBit.lb deleted file mode 100644 index b75cb9ba23..0000000000 --- a/targets/amd/solo/Config-8MBit.lb +++ /dev/null @@ -1,17 +0,0 @@ -# AMD Solo -# This will make a target directory of ./solo - - -target solo-8mbit -mainboard amd/solo - -option ROM_SIZE=1024*1024 - -romimage "only" - option USE_FALLBACK_IMAGE=1 - option ROM_IMAGE_SIZE=0x10000 - option LINUXBIOS_EXTRA_VERSION=".0" - payload /usr/share/LinuxBIOS/kernelpayload.elf -end - -buildrom ./solo-8mbit.rom ROM_SIZE "only" diff --git a/targets/amd/solo/Config.lb b/targets/amd/solo/Config.lb deleted file mode 100644 index 8188b605fa..0000000000 --- a/targets/amd/solo/Config.lb +++ /dev/null @@ -1,22 +0,0 @@ -# AMD Solo -# This will make a target directory of ./solo - - -target solo -mainboard amd/solo - -romimage "normal" - option USE_FALLBACK_IMAGE=0 - option ROM_IMAGE_SIZE=0x20000 - option LINUXBIOS_EXTRA_VERSION=".0-Normal" - payload ../../../payloads/tg3--ide_disk.zelf -end - -romimage "fallback" - option USE_FALLBACK_IMAGE=1 - option ROM_IMAGE_SIZE=0x20000 - option LINUXBIOS_EXTRA_VERSION=".0-Fallback" - payload ../../../payloads/tg3--ide_disk.zelf -end - -buildrom ./solo.rom ROM_SIZE "normal" "fallback" |