diff options
| -rw-r--r-- | src/mainboard/google/glados/devicetree.cb | 9 | ||||
| -rw-r--r-- | src/mainboard/google/glados/gpio.h | 4 |
2 files changed, 5 insertions, 8 deletions
diff --git a/src/mainboard/google/glados/devicetree.cb b/src/mainboard/google/glados/devicetree.cb index 7e1e6c7499..f6aaac36f0 100644 --- a/src/mainboard/google/glados/devicetree.cb +++ b/src/mainboard/google/glados/devicetree.cb @@ -43,15 +43,12 @@ chip soc/intel/skylake register "SkipExtGfxScan" = "1" register "Device4Enable" = "1" - # Enable Root port 1 and 5. + # Enable Root port 1. register "PcieRpEnable[0]" = "1" - register "PcieRpEnable[4]" = "1" # Enable CLKREQ# register "PcieRpClkReqSupport[0]" = "1" - register "PcieRpClkReqSupport[4]" = "1" - # RP 1 uses SRCCLKREQ1# while RP 5 uses SRCCLKREQ2# + # RP 1 uses SRCCLKREQ1# register "PcieRpClkReqNumber[0]" = "1" - register "PcieRpClkReqNumber[4]" = "2" register "usb2_ports[0]" = "USB2_PORT_TYPE_C" # Type-C Port (board) register "usb2_ports[1]" = "USB2_PORT_MAX" # Type-C Port (flex) @@ -106,7 +103,7 @@ chip soc/intel/skylake device pci 1c.1 off end # PCI Express Port 2 device pci 1c.2 off end # PCI Express Port 3 device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 on end # PCI Express Port 5 + device pci 1c.4 off end # PCI Express Port 5 device pci 1c.5 off end # PCI Express Port 6 device pci 1c.6 off end # PCI Express Port 7 device pci 1c.7 off end # PCI Express Port 8 diff --git a/src/mainboard/google/glados/gpio.h b/src/mainboard/google/glados/gpio.h index d42b711d47..cd7a93677f 100644 --- a/src/mainboard/google/glados/gpio.h +++ b/src/mainboard/google/glados/gpio.h @@ -115,7 +115,7 @@ static const struct pad_config gpio_table[] = { /* UART0_RXD */ /* GPP_C8 */ /* UART0_TXD */ /* GPP_C9 */ /* UART0_RTS# */ /* GPP_C10 */ -/* UART0_CTS# */ PAD_CFG_GPO(GPP_C11, 1, DEEP), /* EN_PP3300_KEPLER */ +/* UART0_CTS# */ PAD_CFG_GPO(GPP_C11, 0, DEEP), /* EN_PP3300_KEPLER */ /* UART1_RXD */ PAD_CFG_GPI(GPP_C12, NONE, DEEP), /* MEM_CONFIG[0] */ /* UART1_TXD */ PAD_CFG_GPI(GPP_C13, NONE, DEEP), /* MEM_CONFIG[1] */ /* UART1_RTS# */ PAD_CFG_GPI(GPP_C14, NONE, DEEP), /* MEM_CONFIG[2] */ @@ -230,7 +230,7 @@ static const struct pad_config gpio_table[] = { /* Early pad configuration in romstage. */ static const struct pad_config early_gpio_table[] = { /* SRCCLKREQ2# */ PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), /* KEPLER */ -/* UART0_CTS# */ PAD_CFG_GPO(GPP_C11, 1, DEEP), /* EN_PP3300_KEPLER */ +/* UART0_CTS# */ PAD_CFG_GPO(GPP_C11, 0, DEEP), /* EN_PP3300_KEPLER */ }; #endif |