diff options
-rw-r--r-- | src/mainboard/intel/d945gclf/Makefile.inc | 2 | ||||
-rw-r--r-- | src/mainboard/kontron/986lcd-m/Makefile.inc | 2 | ||||
-rw-r--r-- | src/mainboard/kontron/986lcd-m/cmos.layout | 3 | ||||
-rw-r--r-- | src/mainboard/kontron/986lcd-m/fadt.c | 11 | ||||
-rw-r--r-- | src/mainboard/kontron/986lcd-m/romstage.c | 12 | ||||
-rw-r--r-- | src/mainboard/roda/rk886ex/Makefile.inc | 2 | ||||
-rw-r--r-- | src/mainboard/roda/rk886ex/cmos.layout | 3 | ||||
-rw-r--r-- | src/mainboard/roda/rk886ex/romstage.c | 9 | ||||
-rw-r--r-- | src/northbridge/intel/i945/early_init.c | 32 | ||||
-rw-r--r-- | src/northbridge/intel/i945/i945.h | 2 | ||||
-rw-r--r-- | src/northbridge/intel/i945/raminit.c | 50 | ||||
-rw-r--r-- | src/northbridge/intel/i945/udelay.c | 3 |
12 files changed, 92 insertions, 39 deletions
diff --git a/src/mainboard/intel/d945gclf/Makefile.inc b/src/mainboard/intel/d945gclf/Makefile.inc index a155c7284f..4c6642f003 100644 --- a/src/mainboard/intel/d945gclf/Makefile.inc +++ b/src/mainboard/intel/d945gclf/Makefile.inc @@ -17,6 +17,6 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -obj-y += rtl8168.o +driver-y += rtl8168.o smmobj-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.o diff --git a/src/mainboard/kontron/986lcd-m/Makefile.inc b/src/mainboard/kontron/986lcd-m/Makefile.inc index b6a23660c8..591d064848 100644 --- a/src/mainboard/kontron/986lcd-m/Makefile.inc +++ b/src/mainboard/kontron/986lcd-m/Makefile.inc @@ -17,6 +17,6 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -obj-y += rtl8168.o +driver-y += rtl8168.o smmobj-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.o diff --git a/src/mainboard/kontron/986lcd-m/cmos.layout b/src/mainboard/kontron/986lcd-m/cmos.layout index 2217cb365a..a61a9deabf 100644 --- a/src/mainboard/kontron/986lcd-m/cmos.layout +++ b/src/mainboard/kontron/986lcd-m/cmos.layout @@ -89,7 +89,8 @@ entries # coreboot config options: bootloader 416 512 s 0 boot_devices -#928 40 r 0 unused +928 8 h 0 boot_default +#936 12 r 0 unused # coreboot config options: mainboard specific options 948 2 e 8 cpufan_cruise_control diff --git a/src/mainboard/kontron/986lcd-m/fadt.c b/src/mainboard/kontron/986lcd-m/fadt.c index a0e381fb13..12aeac062e 100644 --- a/src/mainboard/kontron/986lcd-m/fadt.c +++ b/src/mainboard/kontron/986lcd-m/fadt.c @@ -89,16 +89,17 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; - fadt->reset_reg.space_id = 0; - fadt->reset_reg.bit_width = 0; + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; fadt->reset_reg.bit_offset = 0; fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0x0; - fadt->reset_reg.addrh = 0x0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; - fadt->reset_value = 0; + fadt->reset_value = 6; fadt->x_firmware_ctl_l = (unsigned long)facs; fadt->x_firmware_ctl_h = 0; fadt->x_dsdt_l = (unsigned long)dsdt; diff --git a/src/mainboard/kontron/986lcd-m/romstage.c b/src/mainboard/kontron/986lcd-m/romstage.c index bcec4465fa..9ddbb05ee3 100644 --- a/src/mainboard/kontron/986lcd-m/romstage.c +++ b/src/mainboard/kontron/986lcd-m/romstage.c @@ -367,6 +367,13 @@ void main(unsigned long bist) } ich7_enable_lpc(); + + /* Force PCIRST# */ + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR); + udelay(200); + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0); + udelay(200); + early_superio_config_w83627thg(); /* Set up the console */ @@ -383,8 +390,9 @@ void main(unsigned long bist) report_bist_failure(bist); if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected.\n"); - boot_mode = 1; + printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n"); + outb(0x6, 0xcf9); + while (1) asm("hlt"); } /* Perform some early chipset initialization required diff --git a/src/mainboard/roda/rk886ex/Makefile.inc b/src/mainboard/roda/rk886ex/Makefile.inc index cf0241dd5d..f92043d7ab 100644 --- a/src/mainboard/roda/rk886ex/Makefile.inc +++ b/src/mainboard/roda/rk886ex/Makefile.inc @@ -19,6 +19,6 @@ obj-y += m3885.o obj-y += ec.o -obj-y += rtl8168.o +driver-y += rtl8168.o smmobj-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.o diff --git a/src/mainboard/roda/rk886ex/cmos.layout b/src/mainboard/roda/rk886ex/cmos.layout index b5ae473ac6..4dc9112061 100644 --- a/src/mainboard/roda/rk886ex/cmos.layout +++ b/src/mainboard/roda/rk886ex/cmos.layout @@ -91,7 +91,8 @@ entries # coreboot config options: bootloader 416 512 s 0 boot_devices -#928 80 r 0 unused +928 8 h 0 boot_default +#936 48 r 0 unused # coreboot config options: check sums 984 16 h 0 check_sum diff --git a/src/mainboard/roda/rk886ex/romstage.c b/src/mainboard/roda/rk886ex/romstage.c index df985d4210..803aaee89b 100644 --- a/src/mainboard/roda/rk886ex/romstage.c +++ b/src/mainboard/roda/rk886ex/romstage.c @@ -281,6 +281,10 @@ void main(unsigned long bist) } ich7_enable_lpc(); + + /* Force PCIRST# */ + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR); + early_superio_config(); /* Set up the console */ @@ -297,8 +301,9 @@ void main(unsigned long bist) report_bist_failure(bist); if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected.\n"); - boot_mode = 1; + printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n"); + outb(0x6, 0xcf9); + while (1) asm("hlt"); } /* Perform some early chipset initialization required diff --git a/src/northbridge/intel/i945/early_init.c b/src/northbridge/intel/i945/early_init.c index f6cdcca961..c892216dea 100644 --- a/src/northbridge/intel/i945/early_init.c +++ b/src/northbridge/intel/i945/early_init.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2007-2010 coresystems GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -154,7 +154,7 @@ static void i945_setup_bars(void) printk(BIOS_DEBUG, " done.\n"); printk(BIOS_DEBUG, "Disabling Watchdog reboot..."); - RCBA32(GCS) = (RCBA32(0x3410)) | (1 << 5); /* No reset */ + RCBA32(GCS) = RCBA32(GCS) | (1 << 5); /* No reset */ outw((1 << 11), DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */ printk(BIOS_DEBUG, " done.\n"); @@ -344,8 +344,7 @@ static void i945_setup_dmi_rcrb(void) { u32 reg32; u32 timeout; - - int activate_aspm = 1; + int activate_aspm = 1; /* hardcode ASPM for now */ printk(BIOS_DEBUG, "Setting up DMI RCRB\n"); @@ -481,10 +480,12 @@ static void i945_setup_dmi_rcrb(void) else printk(BIOS_DEBUG, "ok\n"); + /* Clear Error Status Bits! */ DMIBAR32(0x1c4) = 0xffffffff; DMIBAR32(0x1d0) = 0xffffffff; DMIBAR32(0x228) = 0xffffffff; + /* Program Read-Only Write-Once Registers */ DMIBAR32(0x308) = DMIBAR32(0x308); DMIBAR32(0x314) = DMIBAR32(0x314); DMIBAR32(0x324) = DMIBAR32(0x324); @@ -500,7 +501,7 @@ static void i945_setup_dmi_rcrb(void) reg32 |= (3 << 0); DMIBAR32(0x224) = reg32; outb(0x06, 0xcf9); - for (;;) ; /* wait for reset */ + for (;;) asm("hlt"); /* wait for reset */ } } } @@ -530,11 +531,11 @@ static void i945_setup_pci_express_x16(void) /* First we reset the secondary bus */ reg16 = pci_read_config16(PCI_DEV(0, 0x01, 0), 0x3e); - reg16 |= (1 << 6); + reg16 |= (1 << 6); /* SRESET */ pci_write_config16(PCI_DEV(0, 0x01, 0), 0x3e, reg16); /* Read back and clear reset bit. */ reg16 = pci_read_config16(PCI_DEV(0, 0x01, 0), 0x3e); - reg16 &= ~(1 << 6); + reg16 &= ~(1 << 6); /* SRESET */ pci_write_config16(PCI_DEV(0, 0x01, 0), 0x3e, reg16); reg16 = pci_read_config16(PCI_DEV(0, 0x01, 0), 0xba); @@ -625,9 +626,11 @@ static void i945_setup_pci_express_x16(void) if (reg16 == 1) { reg32 |= 0x32b; // TODO + /* pcie_write_config32(PCI_DEV(0, 0x01, 0), 0x204, reg32); */ } else if (reg16 == 16) { reg32 |= 0x0f4; // TODO + /* pcie_write_config32(PCI_DEV(0, 0x01, 0), 0x204, reg32); */ } reg32 = (pci_read_config32(PCI_DEV(0xa, 0, 0), 0x8) >> 8); @@ -745,8 +748,8 @@ static void i945_setup_pci_express_x16(void) if (i945_silicon_revision() <= 2 ) { /* Set voltage specific parameters */ reg32 = pcie_read_config32(PCI_DEV(0, 0x01, 0), 0xe80); - reg32 &= (0xf << 4); - if ((MCHBAR32(0xe08) & (1 << 20)) == 0) { + reg32 &= (0xf << 4); /* Default case 1.05V */ + if ((MCHBAR32(0xe08) & (1 << 20)) == 0) { /* 1.50V */ reg32 |= (7 << 4); } pcie_write_config32(PCI_DEV(0, 0x01, 0), 0xe80, reg32); @@ -843,7 +846,12 @@ static void ich7_setup_pci_express(void) { RCBA32(CG) |= (1 << 0); + /* Initialize slot power limit for root ports */ pci_write_config32(PCI_DEV(0, 0x1c, 0), 0x54, 0x00000060); +#if 0 + pci_write_config32(PCI_DEV(0, 0x1c, 4), 0x54, 0x00480ce0); + pci_write_config32(PCI_DEV(0, 0x1c, 5), 0x54, 0x00500ce0); +#endif pci_write_config32(PCI_DEV(0, 0x1c, 0), 0xd8, 0x00110000); } @@ -852,11 +860,11 @@ static void i945_early_initialization(void) { /* Print some chipset specific information */ switch (pci_read_config32(PCI_DEV(0, 0x00, 0), 0)) { - case 0x27708086: + case 0x27708086: /* 82945G/GZ/GC/P/PL */ i945_detect_chipset(); break; - case 0x27a08086: - case 0x27ac8086: + case 0x27a08086: /* 945GME/GSE */ + case 0x27ac8086: /* 945GM/PM/GMS/GU/GT, 943/940GML */ i945m_detect_chipset(); break; } diff --git a/src/northbridge/intel/i945/i945.h b/src/northbridge/intel/i945/i945.h index a23e3a8f82..0d6f024673 100644 --- a/src/northbridge/intel/i945/i945.h +++ b/src/northbridge/intel/i945/i945.h @@ -331,5 +331,7 @@ #define DMIDRCCFG 0xeb4 /* 32bit */ +static inline void barrier(void) { asm("" ::: "memory"); } + #endif #endif diff --git a/src/northbridge/intel/i945/raminit.c b/src/northbridge/intel/i945/raminit.c index 3c54b98855..1922fab4b6 100644 --- a/src/northbridge/intel/i945/raminit.c +++ b/src/northbridge/intel/i945/raminit.c @@ -132,7 +132,7 @@ static int sdram_capabilities_max_supported_memory_frequency(void) return MAXIMUM_SUPPORTED_FREQUENCY; #endif - reg32 = pci_read_config32(PCI_DEV(0, 0x00, 0), 0xe4); + reg32 = pci_read_config32(PCI_DEV(0, 0x00, 0), 0xe4); /* CAPID0 + 4 */ reg32 &= (7 << 0); switch (reg32) { @@ -156,7 +156,7 @@ static int sdram_capabilities_interleave(void) { u32 reg32; - reg32 = pci_read_config8(PCI_DEV(0, 0x00,0), 0xe4); + reg32 = pci_read_config32(PCI_DEV(0, 0x00,0), 0xe4); /* CAPID0 + 4 */ reg32 >>= 25; reg32 &= 1; @@ -172,7 +172,7 @@ static int sdram_capabilities_dual_channel(void) { u32 reg32; - reg32 = pci_read_config8(PCI_DEV(0, 0x00,0), 0xe4); + reg32 = pci_read_config32(PCI_DEV(0, 0x00,0), 0xe4); /* CAPID0 + 4 */ reg32 >>= 24; reg32 &= 1; @@ -205,7 +205,7 @@ static int sdram_capabilities_MEM4G_disable(void) { u8 reg8; - reg8 = pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe5); + reg8 = pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe5); /* CAPID0 + 5 */ reg8 &= (1 << 0); return (reg8 != 0); @@ -228,7 +228,7 @@ static int sdram_capabilities_core_frequencies(void) return (reg8); } -static void sdram_detect_errors(void) +static void sdram_detect_errors(struct sys_info *sysinfo) { u8 reg8; u8 do_reset = 0; @@ -269,6 +269,29 @@ static void sdram_detect_errors(void) reg8 |= (1<<7); pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8); + /* clear self refresh if not wake-up from suspend */ + if (sysinfo->boot_path != 2) { + MCHBAR8(0xf14) |= 3; + } else { + /* Validate self refresh config */ + if (((sysinfo->dimm[0] != SYSINFO_DIMM_NOT_POPULATED) || + (sysinfo->dimm[1] != SYSINFO_DIMM_NOT_POPULATED)) && + !(MCHBAR8(0xf14) & (1<<0))) { + do_reset = 1; + } + if (((sysinfo->dimm[2] != SYSINFO_DIMM_NOT_POPULATED) || + (sysinfo->dimm[3] != SYSINFO_DIMM_NOT_POPULATED)) && + !(MCHBAR8(0xf14) & (1<<1))) { + do_reset = 1; + } + } + + if (do_reset) { + printk(BIOS_DEBUG, "Reset required.\n"); + outb(0x00, 0xcf9); + outb(0x0e, 0xcf9); + for (;;) asm("hlt"); /* Wait for reset! */ + } } /** @@ -1311,7 +1334,7 @@ static void sdram_enable_system_memory_io(struct sys_info *sysinfo) reg32 |= (1 << 6) | (1 << 4); MCHBAR32(DRTST) = reg32; - asm volatile ("nop; nop;"); + asm volatile ("nop; nop;" ::: "memory"); reg32 = MCHBAR32(DRTST); @@ -1890,6 +1913,7 @@ static void sdram_set_channel_mode(struct sys_info *sysinfo) printk(BIOS_DEBUG, "Single Channel 0 only.\n"); } + /* Now disable channel XORing */ reg32 |= (1 << 10); MCHBAR32(DCC) = reg32; @@ -1960,7 +1984,7 @@ static void sdram_program_graphics_frequency(struct sys_info *sysinfo) if (voltage == VOLTAGE_1_05) freq = CRCLK_250MHz; else - freq = CRCLK_400MHz; + freq = CRCLK_400MHz; /* 1.5V requires 400MHz */ break; case GFX_FREQUENCY_CAP_250MHZ: freq = CRCLK_250MHz; break; case GFX_FREQUENCY_CAP_200MHZ: freq = CRCLK_200MHz; break; @@ -2096,7 +2120,7 @@ vco_update: clkcfg |= (1 << 10); MCHBAR32(CLKCFG) = clkcfg; - __asm__ __volatile__ ( + asm volatile ( " movl $0x100, %%ecx\n" "delay_update:\n" " nop\n" @@ -2106,7 +2130,7 @@ vco_update: " loop delay_update\n" : /* No outputs */ : /* No inputs */ - : "%ecx" + : "%ecx", "memory" ); clkcfg &= ~(1 << 10); @@ -2136,7 +2160,7 @@ static void sdram_program_clock_crossing(void) 0x08040120, 0x00000000, /* DDR400 FSB533 */ 0x00100401, 0x00000000, /* DDR533 FSB533 */ - 0xffffffff, 0xffffffff, /* nonexistant */ + 0x00010402, 0x00000000, /* DDR667 FSB533 - fake values */ 0x04020120, 0x00000010, /* DDR400 FSB667 */ 0x10040280, 0x00000040, /* DDR533 FSB667 */ @@ -2615,6 +2639,7 @@ static void sdram_thermal_management(void) * 0x30/0x32. */ + /* TODO This is not implemented yet. Volunteers? */ } static void sdram_save_receive_enable(void) @@ -3007,8 +3032,6 @@ void sdram_initialize(int boot_path) struct sys_info sysinfo; u8 reg8, cas_mask; - sdram_detect_errors(); - printk(BIOS_DEBUG, "Setting up RAM controller.\n"); memset(&sysinfo, 0, sizeof(sysinfo)); @@ -3018,6 +3041,9 @@ void sdram_initialize(int boot_path) /* Look at the type of DIMMs and verify all DIMMs are x8 or x16 width */ sdram_get_dram_configuration(&sysinfo); + /* If error, do cold boot */ + sdram_detect_errors(&sysinfo); + /* Check whether we have stacked DIMMs */ sdram_verify_package_type(&sysinfo); diff --git a/src/northbridge/intel/i945/udelay.c b/src/northbridge/intel/i945/udelay.c index 965c890d1b..d5349c937e 100644 --- a/src/northbridge/intel/i945/udelay.c +++ b/src/northbridge/intel/i945/udelay.c @@ -17,6 +17,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <delay.h> #include <cpu/x86/tsc.h> #include <cpu/x86/msr.h> @@ -24,7 +25,7 @@ * Intel Core(tm) cpus always run the TSC at the maximum possible CPU clock */ -static void udelay(u32 us) +void udelay(u32 us) { u32 dword; tsc_t tsc, tsc1, tscd; |