summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/superio/ite/Makefile.inc3
-rw-r--r--src/superio/ite/common/Kconfig24
-rw-r--r--src/superio/ite/common/env_ctrl.c250
-rw-r--r--src/superio/ite/common/env_ctrl.h135
-rw-r--r--src/superio/ite/common/env_ctrl_chip.h100
5 files changed, 512 insertions, 0 deletions
diff --git a/src/superio/ite/Makefile.inc b/src/superio/ite/Makefile.inc
index eb073d441d..487beb1709 100644
--- a/src/superio/ite/Makefile.inc
+++ b/src/superio/ite/Makefile.inc
@@ -16,6 +16,9 @@
## include generic ite pre-ram stage driver
romstage-$(CONFIG_SUPERIO_ITE_COMMON_ROMSTAGE) += common/early_serial.c
+## include generic ite environment controller driver
+ramstage-$(CONFIG_SUPERIO_ITE_ENV_CTRL) += common/env_ctrl.c
+
subdirs-y += it8671f
subdirs-y += it8712f
subdirs-y += it8716f
diff --git a/src/superio/ite/common/Kconfig b/src/superio/ite/common/Kconfig
index 165944b7e2..162b7f1545 100644
--- a/src/superio/ite/common/Kconfig
+++ b/src/superio/ite/common/Kconfig
@@ -3,6 +3,7 @@
##
## Copyright (C) 2009 Ronald G. Minnich
## Copyright (C) 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com>
+## Copyright (C) 2016 secunet Security Networks AG
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
@@ -18,3 +19,26 @@
# romstage.
config SUPERIO_ITE_COMMON_ROMSTAGE
bool
+
+# Generic ITE environment controller driver
+config SUPERIO_ITE_ENV_CTRL
+ bool
+
+if SUPERIO_ITE_ENV_CTRL
+
+config SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG
+ bool
+ help
+ Enable extended, 16-bit wide tacho counters.
+
+config SUPERIO_ITE_ENV_CTRL_8BIT_PWM
+ bool
+ help
+ PWM duty cycles are set in 8-bit registers (instead of 7 bit).
+
+config SUPERIO_ITE_ENV_CTRL_PWM_FREQ2
+ bool
+ help
+ The second FAN controller has a separate frequency setting.
+
+endif
diff --git a/src/superio/ite/common/env_ctrl.c b/src/superio/ite/common/env_ctrl.c
new file mode 100644
index 0000000000..4ce6ccc50d
--- /dev/null
+++ b/src/superio/ite/common/env_ctrl.c
@@ -0,0 +1,250 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ * Copyright (C) 2016 secunet Security Networks AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdlib.h>
+#include <arch/io.h>
+#include <console/console.h>
+#include <delay.h>
+
+#include "env_ctrl.h"
+#include "env_ctrl_chip.h"
+
+static inline u8 ite_ec_read(const u16 base, const u8 addr)
+{
+ outb(addr, base + 5);
+ return inb(base + 6);
+}
+
+static inline void ite_ec_write(const u16 base, const u8 addr, const u8 value)
+{
+ outb(addr, base + 5);
+ outb(value, base + 6);
+}
+
+static void extemp_force_idle_status(const u16 base)
+{
+ u8 reg;
+ int retries = 10;
+
+ /* Wait up to 10ms for non-busy state. */
+ while (retries > 0) {
+ reg = ite_ec_read(base, ITE_EC_EXTEMP_STATUS);
+
+ if ((reg & ITE_EC_EXTEMP_STATUS_HOST_BUSY) == 0x0)
+ break;
+
+ retries--;
+
+ mdelay(1);
+ }
+
+ if (retries == 0 && (reg & ITE_EC_EXTEMP_STATUS_HOST_BUSY) == 0x1) {
+ /*
+ * SIO is busy due to unfinished peci transaction.
+ * Re-configure Register 0x8E to terminate processes.
+ */
+ ite_ec_write(base, ITE_EC_EXTEMP_CONTROL,
+ ITE_EC_EXTEMP_CTRL_AUTO_4HZ |
+ ITE_EC_EXTEMP_CTRL_AUTO_START);
+ }
+}
+
+/*
+ * Setup External Temperature to read via PECI into TMPINx register
+ */
+static void enable_peci(const u16 base, const u8 tmpin)
+{
+ if (tmpin == 0 || tmpin > ITE_EC_TMPIN_CNT)
+ return;
+
+ /* Enable PECI interface */
+ ite_ec_write(base, ITE_EC_INTERFACE_SELECT,
+ ITE_EC_INTERFACE_SEL_PECI |
+ ITE_EC_INTERFACE_SPEED_TOLERANCE);
+
+ /* Setup External Temperature using PECI GetTemp */
+ ite_ec_write(base, ITE_EC_EXTEMP_ADDRESS,
+ PECI_CLIENT_ADDRESS);
+ ite_ec_write(base, ITE_EC_EXTEMP_COMMAND,
+ PECI_GETTEMP_COMMAND);
+ ite_ec_write(base, ITE_EC_EXTEMP_WRITE_LENGTH,
+ PECI_GETTEMP_WRITE_LENGTH);
+ ite_ec_write(base, ITE_EC_EXTEMP_READ_LENGTH,
+ PECI_GETTEMP_READ_LENGTH);
+ ite_ec_write(base, ITE_EC_EXTEMP_CONTROL,
+ ITE_EC_EXTEMP_CTRL_AUTO_4HZ |
+ ITE_EC_EXTEMP_CTRL_AUTO_START);
+
+ /* External Temperature reported in TMPINx register */
+ ite_ec_write(base, ITE_EC_ADC_TEMP_CHANNEL_ENABLE,
+ (tmpin & 3) << 6);
+}
+
+/*
+ * Set up External Temperature to read via thermal diode/resistor
+ * into TMPINx register
+ */
+static void enable_tmpin(const u16 base, const int tmpin,
+ const enum ite_ec_thermal_mode mode)
+{
+ u8 reg;
+
+ reg = ite_ec_read(base, ITE_EC_ADC_TEMP_CHANNEL_ENABLE);
+
+ switch (mode) {
+ case THERMAL_DIODE:
+ reg |= ITE_EC_ADC_TEMP_DIODE_MODE(tmpin);
+ break;
+ case THERMAL_RESISTOR:
+ reg |= ITE_EC_ADC_TEMP_RESISTOR_MODE(tmpin);
+ break;
+ default:
+ printk(BIOS_WARNING,
+ "Unsupported thermal mode 0x%x on TMPIN%d\n",
+ mode, tmpin);
+ return;
+ }
+
+ ite_ec_write(base, ITE_EC_ADC_TEMP_CHANNEL_ENABLE, reg);
+
+ /* Enable the startup of monitoring operation */
+ reg = ite_ec_read(base, ITE_EC_CONFIGURATION);
+ reg |= ITE_EC_CONFIGURATION_START;
+ ite_ec_write(base, ITE_EC_CONFIGURATION, reg);
+}
+
+static void fan_smartconfig(const u16 base, const u8 fan,
+ const enum ite_ec_fan_mode mode,
+ const struct ite_ec_fan_smartconfig *const conf)
+{
+ u8 pwm_ctrl;
+ u8 pwm_start = 0;
+ u8 pwm_auto = 0;
+
+ if (mode == FAN_SMART_SOFTWARE) {
+ pwm_ctrl = ITE_EC_FAN_CTL_PWM_MODE_SOFTWARE;
+
+ /* 50% duty cycle by default */
+ const u8 duty = conf->pwm_start ? conf->pwm_start : 50;
+ if (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_8BIT_PWM))
+ pwm_start = ITE_EC_FAN_CTL_PWM_DUTY(duty);
+ else
+ pwm_ctrl |= ITE_EC_FAN_CTL_PWM_DUTY(duty);
+ } else {
+ pwm_ctrl = ITE_EC_FAN_CTL_PWM_MODE_AUTOMATIC;
+ pwm_ctrl |= ITE_EC_FAN_CTL_TEMPIN(conf->tmpin);
+
+ pwm_start = ITE_EC_FAN_CTL_PWM_START_DUTY(conf->pwm_start);
+ pwm_start |= ITE_EC_FAN_CTL_PWM_SLOPE_BIT6(conf->slope);
+
+ pwm_auto = ITE_EC_FAN_CTL_PWM_SLOPE_LOWER(conf->slope);
+
+ ite_ec_write(base, ITE_EC_FAN_CTL_TEMP_LIMIT_OFF(fan),
+ conf->tmp_off);
+ ite_ec_write(base, ITE_EC_FAN_CTL_TEMP_LIMIT_START(fan),
+ conf->tmp_start);
+ /* Full speed above 127°C by default */
+ ite_ec_write(base, ITE_EC_FAN_CTL_TEMP_LIMIT_FULL(fan),
+ conf->tmp_full ? conf->tmp_full : 127);
+ ite_ec_write(base, ITE_EC_FAN_CTL_DELTA_TEMP(fan),
+ ITE_EC_FAN_CTL_DELTA_TEMP_INTRVL(conf->tmp_delta));
+ }
+
+ ite_ec_write(base, ITE_EC_FAN_CTL_PWM_CONTROL(fan), pwm_ctrl);
+ ite_ec_write(base, ITE_EC_FAN_CTL_PWM_START(fan), pwm_start);
+ ite_ec_write(base, ITE_EC_FAN_CTL_PWM_AUTO(fan), pwm_auto);
+}
+
+static void enable_fan(const u16 base, const u8 fan,
+ const struct ite_ec_fan_config *const conf)
+{
+ u8 reg;
+
+ if (conf->mode == FAN_IGNORE)
+ return;
+
+ /* FAN_CTL2 might have its own frequency setting */
+ if (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_PWM_FREQ2) && fan == 2) {
+ reg = ite_ec_read(base, ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE);
+ reg &= ~ITE_EC_FAN_PWM_CLOCK_MASK;
+ reg |= ITE_EC_FAN_PWM_DEFAULT_CLOCK;
+ ite_ec_write(base, ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE, reg);
+ }
+
+ if (conf->mode >= FAN_SMART_SOFTWARE) {
+ fan_smartconfig(base, fan, conf->mode, &conf->smart);
+ } else {
+ reg = ite_ec_read(base, ITE_EC_FAN_CTL_MODE);
+ if (conf->mode == FAN_MODE_ON)
+ reg |= ITE_EC_FAN_CTL_ON(fan);
+ else
+ reg &= ~ITE_EC_FAN_CTL_ON(fan);
+ ite_ec_write(base, ITE_EC_FAN_CTL_MODE, reg);
+ }
+
+ if (IS_ENABLED(SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG)
+ && conf->mode >= FAN_MODE_ON) {
+ reg = ite_ec_read(base, ITE_EC_FAN_TAC_COUNTER_ENABLE);
+ reg |= ITE_EC_FAN_TAC_16BIT_ENABLE(fan);
+ ite_ec_write(base, ITE_EC_FAN_TAC_COUNTER_ENABLE, reg);
+ }
+
+ reg = ite_ec_read(base, ITE_EC_FAN_MAIN_CTL);
+ if (conf->mode >= FAN_MODE_ON)
+ reg |= ITE_EC_FAN_MAIN_CTL_TAC_EN(fan);
+ else
+ reg &= ~ITE_EC_FAN_MAIN_CTL_TAC_EN(fan);
+ if (conf->mode >= FAN_SMART_SOFTWARE)
+ reg |= ITE_EC_FAN_MAIN_CTL_SMART(fan);
+ else
+ reg &= ~ITE_EC_FAN_MAIN_CTL_SMART(fan);
+ ite_ec_write(base, ITE_EC_FAN_MAIN_CTL, reg);
+}
+
+void ite_ec_init(const u16 base, const struct ite_ec_config *const conf)
+{
+ size_t i;
+
+ /* Configure 23.43kHz PWM active high output */
+ u8 fan_ctl = ite_ec_read(base, ITE_EC_FAN_CTL_MODE);
+ fan_ctl &= ~ITE_EC_FAN_PWM_CLOCK_MASK;
+ fan_ctl |= ITE_EC_FAN_PWM_DEFAULT_CLOCK;
+ fan_ctl |= ITE_EC_FAN_CTL_POLARITY_HIGH;
+ ite_ec_write(base, ITE_EC_FAN_CTL_MODE, fan_ctl);
+
+ /* Enable PECI if configured */
+ enable_peci(base, conf->peci_tmpin);
+
+ /* Enable HWM if configured */
+ for (i = 0; i < ITE_EC_TMPIN_CNT; ++i)
+ enable_tmpin(base, i + 1, conf->tmpin_mode[i]);
+
+ /* Enable reading of voltage pins */
+ ite_ec_write(base, ITE_EC_ADC_VOLTAGE_CHANNEL_ENABLE, conf->vin_mask);
+
+ /* Enable FANx if configured */
+ for (i = 0; i < ITE_EC_FAN_CNT; ++i)
+ enable_fan(base, i + 1, &conf->fan[i]);
+
+ /*
+ * System may get wrong temperature data when SIO is in
+ * busy state. Therefore, check the status and terminate
+ * processes if needed.
+ */
+ if (conf->peci_tmpin != 0)
+ extemp_force_idle_status(base);
+}
diff --git a/src/superio/ite/common/env_ctrl.h b/src/superio/ite/common/env_ctrl.h
new file mode 100644
index 0000000000..fa131166c0
--- /dev/null
+++ b/src/superio/ite/common/env_ctrl.h
@@ -0,0 +1,135 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ * Copyright (C) 2016 secunet Security Networks AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef SUPERIO_ITE_ENV_CTRL_H
+#define SUPERIO_ITE_ENV_CTRL_H
+
+#include "env_ctrl_chip.h"
+
+#if IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_8BIT_PWM)
+#define ITE_EC_FAN_MAX_PWM 0xff
+#define ITE_EC_FAN_PWM_DEFAULT_CLOCK ITE_EC_FAN_PWM_CLOCK_6MHZ
+#else
+#define ITE_EC_FAN_MAX_PWM 0x7f
+#define ITE_EC_FAN_PWM_DEFAULT_CLOCK ITE_EC_FAN_PWM_CLOCK_3MHZ
+#endif
+
+#define ITE_EC_CONFIGURATION 0x00
+#define ITE_EC_CONFIGURATION_START (1 << 0)
+
+#define ITE_EC_INTERFACE_SELECT 0x0a
+#define ITE_EC_INTERFACE_PSEUDO_EOC (1 << 7)
+#define ITE_EC_INTERFACE_SMB_ENABLE (1 << 6)
+#define ITE_EC_INTERFACE_SEL_DISABLE (0 << 4)
+#define ITE_EC_INTERFACE_SEL_SST_SLAVE (1 << 4)
+#define ITE_EC_INTERFACE_SEL_PECI (2 << 4)
+#define ITE_EC_INTERFACE_SEL_SST_HOST (3 << 4)
+#define ITE_EC_INTERFACE_CLOCK_32MHZ (0 << 3)
+#define ITE_EC_INTERFACE_CLOCK_24MHZ (1 << 3)
+#define ITE_EC_INTERFACE_SPEED_TOLERANCE (1 << 2)
+#define ITE_EC_INTERFACE_PECI_AWFCS (1 << 0)
+
+#define ITE_EC_FAN_PWM_SMOOTHING_FREQ 0x0b
+#define ITE_EC_FAN_PWM_SMOOTHING_MASK (3 << 6)
+#define ITE_EC_FAN_PWM_SMOOTHING_1KHZ (0 << 6)
+#define ITE_EC_FAN_PWM_SMOOTHING_256HZ (1 << 6)
+#define ITE_EC_FAN_PWM_SMOOTHING_64HZ (2 << 6)
+#define ITE_EC_FAN_PWM_SMOOTHING_16HZ (3 << 6)
+
+#define ITE_EC_FAN_TAC_COUNTER_ENABLE 0x0c
+#define ITE_EC_FAN_TAC_16BIT_ENABLE(x) (1 << ((x)-1))
+#define ITE_EC_FAN_TAC_LIMIT(x) (0x10 + ((x)-1))
+#define ITE_EC_FAN_TAC_EXT_LIMIT(x) (0x1b + ((x)-1))
+
+#define ITE_EC_FAN_MAIN_CTL 0x13
+#define ITE_EC_FAN_MAIN_CTL_TAC_EN(x) (1 << ((x)+3))
+#define ITE_EC_FAN_MAIN_CTL_COLL_FULL_SPEED (1 << 3)
+#define ITE_EC_FAN_MAIN_CTL_SMART(x) (1 << ((x)-1))
+#define ITE_EC_FAN_CTL_MODE 0x14
+#define ITE_EC_FAN_CTL_POLARITY_HIGH (1 << 7)
+#define ITE_EC_FAN_PWM_CLOCK_MASK (7 << 4)
+#define ITE_EC_FAN_PWM_CLOCK_48MHZ (0 << 4)
+#define ITE_EC_FAN_PWM_CLOCK_24MHZ (1 << 4)
+#define ITE_EC_FAN_PWM_CLOCK_12MHZ (2 << 4)
+#define ITE_EC_FAN_PWM_CLOCK_8MHZ (3 << 4)
+#define ITE_EC_FAN_PWM_CLOCK_6MHZ (4 << 4)
+#define ITE_EC_FAN_PWM_CLOCK_3MHZ (5 << 4)
+#define ITE_EC_FAN_PWM_CLOCK_1_5MHZ (6 << 4)
+#define ITE_EC_FAN_PWM_CLOCK_51KHZ (7 << 4)
+#define ITE_EC_FAN_PWM_MIN_DUTY_20 (1 << 3)
+#define ITE_EC_FAN_CTL_ON(x) (1 << ((x)-1))
+#define ITE_EC_FAN_CTL_PWM_CONTROL(x) (0x15 + ((x)-1))
+#define ITE_EC_FAN_CTL_PWM_MODE_SOFTWARE (0 << 7)
+#define ITE_EC_FAN_CTL_PWM_MODE_AUTOMATIC (1 << 7)
+#define ITE_EC_FAN_CTL_PWM_DUTY_MASK (ITE_EC_FAN_MAX_PWM << 0)
+#define ITE_EC_FAN_CTL_PWM_DUTY(p) \
+ ({ \
+ const unsigned int _p = p; \
+ (_p >= 100) \
+ ? ITE_EC_FAN_MAX_PWM \
+ : (_p * ITE_EC_FAN_MAX_PWM) / 100; \
+ })
+#define ITE_EC_FAN_CTL_TEMPIN_MASK (3 << 0)
+#define ITE_EC_FAN_CTL_TEMPIN(x) (((x)-1) & 3)
+
+#define ITE_EC_ADC_VOLTAGE_CHANNEL_ENABLE 0x50
+#define ITE_EC_ADC_TEMP_CHANNEL_ENABLE 0x51
+#define ITE_EC_ADC_TEMP_EXT_REPORTS_TO(x) (((x) & 3) << 6)
+#define ITE_EC_ADC_TEMP_RESISTOR_MODE(x) (1 << ((x)+2))
+#define ITE_EC_ADC_TEMP_DIODE_MODE(x) (1 << ((x)-1))
+#define ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE 0x55
+
+#define ITE_EC_FAN_CTL_TEMP_LIMIT_OFF(x) (0x60 + ((x)-1) * 8)
+#define ITE_EC_FAN_CTL_TEMP_LIMIT_START(x) (0x61 + ((x)-1) * 8)
+#define ITE_EC_FAN_CTL_TEMP_LIMIT_FULL(x) (0x62 + ((x)-1) * 8)
+#define ITE_EC_FAN_CTL_PWM_START(x) (0x63 + ((x)-1) * 8)
+#define ITE_EC_FAN_CTL_PWM_SLOPE_BIT6(s) (((s) & 0x40) << 1)
+#define ITE_EC_FAN_CTL_PWM_START_DUTY(p) ITE_EC_FAN_CTL_PWM_DUTY(p)
+#define ITE_EC_FAN_CTL_PWM_AUTO(x) (0x64 + ((x)-1) * 8)
+#define ITE_EC_FAN_CTL_AUTO_SMOOTHING_EN (1 << 7)
+#define ITE_EC_FAN_CTL_PWM_SLOPE_LOWER(s) ((s) & 0x3f)
+#define ITE_EC_FAN_CTL_DELTA_TEMP(x) (0x65 + ((x)-1) * 8)
+#define ITE_EC_FAN_CTL_DELTA_TEMP_INTRVL(c) ((c) & 0x1f)
+
+#define ITE_EC_EXTEMP_STATUS 0x88
+#define ITE_EC_EXTEMP_STATUS_HOST_BUSY (1 << 0)
+#define ITE_EC_EXTEMP_ADDRESS 0x89
+#define ITE_EC_EXTEMP_WRITE_LENGTH 0x8a
+#define ITE_EC_EXTEMP_READ_LENGTH 0x8b
+#define ITE_EC_EXTEMP_COMMAND 0x8c
+#define ITE_EC_EXTEMP_WRITE_DATA_2 0x8d
+#define ITE_EC_EXTEMP_CONTROL 0x8e
+#define ITE_EC_EXTEMP_CTRL_AUTO_32HZ (0 << 6)
+#define ITE_EC_EXTEMP_CTRL_AUTO_16HZ (1 << 6)
+#define ITE_EC_EXTEMP_CTRL_AUTO_8HZ (2 << 6)
+#define ITE_EC_EXTEMP_CTRL_AUTO_4HZ (3 << 6)
+#define ITE_EC_EXTEMP_CTRL_AUTO_START (1 << 5)
+#define ITE_EC_EXTEMP_CTRL_AUTO_ABORT (1 << 4)
+#define ITE_EC_EXTEMP_CTRL_AUTO_TWO_DOMAIN (1 << 3)
+#define ITE_EC_EXTEMP_CTRL_CONTENTION (1 << 2)
+#define ITE_EC_EXTEMP_CTRL_SST_IDLE_HIGH (1 << 1)
+#define ITE_EC_EXTEMP_CTRL_START (1 << 0)
+
+/* Standard PECI GetTemp */
+#define PECI_CLIENT_ADDRESS 0x30
+#define PECI_GETTEMP_COMMAND 0x01
+#define PECI_GETTEMP_WRITE_LENGTH 0x01
+#define PECI_GETTEMP_READ_LENGTH 0x02
+
+void ite_ec_init(u16 base, const struct ite_ec_config *conf);
+
+#endif /* SUPERIO_ITE_ENV_CTRL_H */
diff --git a/src/superio/ite/common/env_ctrl_chip.h b/src/superio/ite/common/env_ctrl_chip.h
new file mode 100644
index 0000000000..f01c574d47
--- /dev/null
+++ b/src/superio/ite/common/env_ctrl_chip.h
@@ -0,0 +1,100 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ * Copyright (C) 2016 secunet Security Networks AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef SUPERIO_ITE_ENV_CTRL_CHIP_H
+#define SUPERIO_ITE_ENV_CTRL_CHIP_H
+
+#define ITE_EC_TMPIN_CNT 3
+#define ITE_EC_FAN_CNT 3
+
+/* Supported thermal mode on TMPINx */
+enum ite_ec_thermal_mode {
+ THERMAL_MODE_DISABLED = 0,
+ THERMAL_DIODE,
+ THERMAL_RESISTOR,
+};
+
+/* Bit mask for voltage pins VINx */
+enum ite_ec_voltage_pin {
+ VIN0 = 0x01,
+ VIN1 = 0x02,
+ VIN2 = 0x04,
+ VIN3 = 0x08,
+ VIN4 = 0x10,
+ VIN5 = 0x20,
+ VIN6 = 0x40,
+ VIN7 = 0x80,
+ VIN_ALL = 0xff
+};
+
+enum ite_ec_fan_mode {
+ FAN_IGNORE = 0,
+ FAN_MODE_ON,
+ FAN_MODE_OFF,
+ FAN_SMART_SOFTWARE,
+ FAN_SMART_AUTOMATIC,
+};
+
+struct ite_ec_fan_smartconfig {
+ u8 tmpin; /* select TMPINx (1, 2 or 3) */
+ u8 tmp_off; /* turn fan off below (°C) */
+ u8 tmp_start; /* turn fan on above (°C) */
+ u8 tmp_full; /* 100% duty cycle above (°C) */
+ u8 tmp_delta; /* adapt fan speed when temperature
+ changed by at least `tmp_delta`°C */
+ u8 smoothing; /* enable smoothing */
+ u8 pwm_start; /* start at this duty cycle (%) */
+ u8 slope; /* increase duty cycle by `slope`%/°C */
+};
+
+struct ite_ec_fan_config {
+ enum ite_ec_fan_mode mode;
+ struct ite_ec_fan_smartconfig smart;
+};
+
+struct ite_ec_config {
+ /*
+ * Enable external temperature sensor to use PECI GetTemp()
+ * command and store in register TMPIN 1, 2, or 3.
+ */
+ u8 peci_tmpin;
+
+ /*
+ * Enable thermal mode on TMPINx.
+ */
+ enum ite_ec_thermal_mode tmpin_mode[ITE_EC_TMPIN_CNT];
+
+ /*
+ * Enable reading of voltage pins VINx.
+ */
+ enum ite_ec_voltage_pin vin_mask;
+
+ /*
+ * Enable a FAN in given mode.
+ */
+ struct ite_ec_fan_config fan[ITE_EC_FAN_CNT];
+};
+
+/* Some shorthands for device trees */
+#define TMPIN1 ec.tmpin_mode[0]
+#define TMPIN2 ec.tmpin_mode[1]
+#define TMPIN3 ec.tmpin_mode[2]
+#define FAN1 ec.fan[0]
+#define FAN2 ec.fan[1]
+#define FAN3 ec.fan[2]
+
+#endif /* SUPERIO_ITE_ENV_CTRL_CHIP_H */