summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/sis/sis761/Config.lb341
-rw-r--r--src/mainboard/sis/sis761/Options.lb358
-rw-r--r--src/mainboard/sis/sis761/apc_auto.c132
-rw-r--r--src/mainboard/sis/sis761/cache_as_ram_auto.c372
-rw-r--r--src/mainboard/sis/sis761/chip.h29
-rw-r--r--src/mainboard/sis/sis761/cmos.layout119
-rw-r--r--src/mainboard/sis/sis761/get_bus_conf.c148
-rw-r--r--src/mainboard/sis/sis761/irq_tables.c166
-rw-r--r--src/mainboard/sis/sis761/mainboard.c35
-rw-r--r--src/mainboard/sis/sis761/mptable.c161
-rw-r--r--src/mainboard/sis/sis761/resourcemap.c283
-rw-r--r--src/southbridge/sis/sis966/Config.lb37
-rw-r--r--src/southbridge/sis/sis966/chip.h39
-rw-r--r--src/southbridge/sis/sis966/id.inc36
-rw-r--r--src/southbridge/sis/sis966/id.lds27
-rw-r--r--src/southbridge/sis/sis966/romstrap.inc78
-rw-r--r--src/southbridge/sis/sis966/romstrap.lds27
-rw-r--r--src/southbridge/sis/sis966/sis966.c253
-rw-r--r--src/southbridge/sis/sis966/sis966.h31
-rw-r--r--src/southbridge/sis/sis966/sis966_aza.c501
-rw-r--r--src/southbridge/sis/sis966/sis966_early_ctrl.c60
-rw-r--r--src/southbridge/sis/sis966/sis966_early_setup_car.c429
-rw-r--r--src/southbridge/sis/sis966/sis966_early_setup_ss.h222
-rw-r--r--src/southbridge/sis/sis966/sis966_early_smbus.c904
-rw-r--r--src/southbridge/sis/sis966/sis966_enable_rom.c41
-rw-r--r--src/southbridge/sis/sis966/sis966_enable_usbdebug_direct.c50
-rw-r--r--src/southbridge/sis/sis966/sis966_ht.c56
-rw-r--r--src/southbridge/sis/sis966/sis966_ide.c175
-rw-r--r--src/southbridge/sis/sis966/sis966_lpc.c451
-rw-r--r--src/southbridge/sis/sis966/sis966_nic.c643
-rw-r--r--src/southbridge/sis/sis966/sis966_pci.c109
-rw-r--r--src/southbridge/sis/sis966/sis966_pcie.c86
-rw-r--r--src/southbridge/sis/sis966/sis966_reset.c59
-rw-r--r--src/southbridge/sis/sis966/sis966_sata.c301
-rw-r--r--src/southbridge/sis/sis966/sis966_smbus.c154
-rw-r--r--src/southbridge/sis/sis966/sis966_smbus.h202
-rw-r--r--src/southbridge/sis/sis966/sis966_usb.c114
-rw-r--r--src/southbridge/sis/sis966/sis966_usb2.c168
-rw-r--r--src/southbridge/sis/sis966/sisnb.c192
-rw-r--r--targets/sis/churchill/Config.lb117
-rw-r--r--targets/sis/churchill/README3
-rw-r--r--targets/sis/churchill/VERSION1
42 files changed, 7710 insertions, 0 deletions
diff --git a/src/mainboard/sis/sis761/Config.lb b/src/mainboard/sis/sis761/Config.lb
new file mode 100644
index 0000000000..46a847f769
--- /dev/null
+++ b/src/mainboard/sis/sis761/Config.lb
@@ -0,0 +1,341 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 AMD
+## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+## Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+## Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FAILOVER_IMAGE
+ default ROM_SECTION_SIZE = FAILOVER_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE )
+else
+ if USE_FALLBACK_IMAGE
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
+ else
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
+ default ROM_SECTION_OFFSET = 0
+ end
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+
+if USE_FAILOVER_IMAGE
+ default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
+else
+ if USE_FALLBACK_IMAGE
+ default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE)
+ else
+ default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
+ end
+end
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+#needed by irq_tables and mptable and acpi_tables
+object get_bus_conf.o
+
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+#object reset.o
+if USE_DCACHE_RAM
+
+ if CONFIG_USE_INIT
+ makerule ./cache_as_ram_auto.o
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ end
+ else
+ makerule ./cache_as_ram_auto.inc
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ end
+ end
+
+end
+
+if USE_FAILOVER_IMAGE
+else
+ if CONFIG_AP_CODE_IN_CAR
+ makerule ./apc_auto.o
+ depends "$(MAINBOARD)/apc_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ end
+ ldscript /arch/i386/init/ldscript_apc.lb
+ end
+end
+
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+if HAVE_FAILOVER_BOOT
+ if USE_FAILOVER_IMAGE
+ mainboardinit cpu/x86/16bit/entry16.inc
+ ldscript /cpu/x86/16bit/entry16.lds
+ end
+else
+ if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/entry16.inc
+ ldscript /cpu/x86/16bit/entry16.lds
+ end
+end
+
+mainboardinit cpu/x86/32bit/entry32.inc
+
+if USE_DCACHE_RAM
+ if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ end
+
+ if CONFIG_USE_INIT
+ ldscript /cpu/amd/car/cache_as_ram.lds
+ end
+end
+
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if HAVE_FAILOVER_BOOT
+ if USE_FAILOVER_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+ else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+ end
+else
+ if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+ else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+ end
+end
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit southbridge/sis/sis966/id.inc
+ldscript /southbridge/sis/sis966/id.lds
+
+##
+## ROMSTRAP table for MCP55
+##
+if HAVE_FAILOVER_BOOT
+ if USE_FAILOVER_IMAGE
+ mainboardinit southbridge/sis/sis966/romstrap.inc
+ ldscript /southbridge/sis/sis966/romstrap.lds
+ end
+else
+ if USE_FALLBACK_IMAGE
+ mainboardinit southbridge/sis/sis966/romstrap.inc
+ ldscript /southbridge/sis/sis966/romstrap.lds
+ end
+end
+
+if USE_DCACHE_RAM
+ ##
+ ## Setup Cache-As-Ram
+ ##
+ mainboardinit cpu/amd/car/cache_as_ram.inc
+end
+
+###
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if HAVE_FAILOVER_BOOT
+ if USE_FAILOVER_IMAGE
+ if USE_DCACHE_RAM
+ ldscript /arch/i386/lib/failover_failover.lds
+ end
+ end
+else
+ if USE_FALLBACK_IMAGE
+ if USE_DCACHE_RAM
+ ldscript /arch/i386/lib/failover.lds
+ end
+ end
+end
+
+##
+## Setup RAM
+##
+if USE_DCACHE_RAM
+
+ if CONFIG_USE_INIT
+ initobject cache_as_ram_auto.o
+ else
+ mainboardinit ./cache_as_ram_auto.inc
+ end
+end
+
+##
+## Include the secondary Configuration files
+##
+if CONFIG_CHIP_NAME
+ config chip.h
+end
+
+chip northbridge/amd/amdk8/root_complex
+ device apic_cluster 0 on
+ chip cpu/amd/socket_AM2
+ device apic 0 on end
+ end
+ end
+ device pci_domain 0 on
+ chip northbridge/amd/amdk8 #mc0
+ device pci 18.0 on
+ # devices on link 0, link 0 == LDT 0
+ chip southbridge/sis/sis966
+ device pci 0.0 on end # Northbridge
+ #################################################
+ device pci 1.0 on # AGP bridge
+ chip drivers/pci/onboard # Integrated VGA
+ device pci 0.0 on end
+ register "rom_address" = "0xfff80000"
+ end
+ end
+ #################################################
+ ## device pci 1.0 on end # PCIE
+ device pci 2.0 on # LPC
+ chip superio/ite/it8716f
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.2 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.3 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 on # EC
+ io 0x60 = 0x290
+ io 0x62 = 0x230
+ irq 0x70 = 9
+ end
+ device pnp 2e.5 off # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 2e.6 off # Mouse
+ irq 0x70 = 12
+ end
+ device pnp 2e.8 off # MIDI
+ io 0x60 = 0x300
+ irq 0x70 = 10
+ end
+ device pnp 2e.9 off # GAME
+ io 0x60 = 0x220
+ end
+ device pnp 2e.a off end # CIR
+ end
+ end
+
+ device pci 2.5 on end # IDE (SiS5513)
+ device pci 2.6 off end # Modem (SiS7013)
+ device pci 2.7 off end # Audio (SiS7012)
+ device pci 3.0 on end # USB (SiS7001,USB1.1)
+ device pci 3.1 on end # USB (SiS7001,USB1.1)
+ device pci 3.3 on end # USB (SiS7002,USB2.0)
+ device pci 4.0 on end # NIC (SiS191)
+ device pci 5.0 on end # SATA (SiS1183)
+ device pci 6.0 off end # SB PCIE1 (SiS000A)
+ device pci 7.0 off end # SB PCIE2 (SiS000A)
+ device pci 9.0 off end # PCI E 6
+ device pci a.0 off end # PCI E 5
+ device pci b.0 off end # PCI E 4
+ device pci c.0 off end # PCI E 3
+ device pci d.0 off end # PCI E 2
+ device pci e.0 off end # PCI E 1
+ device pci f.0 on end # Hda
+
+ register "ide0_enable" = "1"
+ register "ide1_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
+ #register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
+ #register "mac_eeprom_addr" = "0x51"
+ end
+ end # device pci 18.0
+ device pci 18.0 on end # Link 1
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ end # mc0
+
+ end # PCI domain
+
+# chip drivers/generic/debug
+# device pnp 0.0 off end # chip name
+# device pnp 0.1 on end # pci_regs_all
+# device pnp 0.2 on end # mem
+# device pnp 0.3 off end # cpuid
+# device pnp 0.4 on end # smbus_regs_all
+# device pnp 0.5 off end # dual core msr
+# device pnp 0.6 off end # cache size
+# device pnp 0.7 off end # tsc
+# device pnp 0.8 off end # io
+# device pnp 0.9 off end # io
+# end
+end #root_complex
diff --git a/src/mainboard/sis/sis761/Options.lb b/src/mainboard/sis/sis761/Options.lb
new file mode 100644
index 0000000000..a7832bc078
--- /dev/null
+++ b/src/mainboard/sis/sis761/Options.lb
@@ -0,0 +1,358 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 AMD
+## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+## Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+## Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses HAVE_ACPI_TABLES
+uses ACPI_SSDTX_NUM
+uses USE_FALLBACK_IMAGE
+uses USE_FAILOVER_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_FAILOVER_BOOT
+uses HAVE_HARD_RESET
+uses IRQ_SLOT_COUNT
+uses HAVE_OPTION_TABLE
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses FALLBACK_SIZE
+uses FAILOVER_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_ROM_PAYLOAD_START
+uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses CONFIG_PRECOMPRESSED_PAYLOAD
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses USE_OPTION_TABLE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses MAINBOARD
+uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses LINUXBIOS_EXTRA_VERSION
+uses _RAMBASE
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
+uses HAVE_INIT_TIMER
+uses CONFIG_GDB_STUB
+uses CONFIG_GDB_STUB
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses CONFIG_CHIP_NAME
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_USBDEBUG_DIRECT
+uses CONFIG_PCI_ROM_RUN
+uses HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZE_AUTO_INC
+uses K8_HT_FREQ_1G_SUPPORT
+
+uses HT_CHAIN_UNITID_BASE
+uses HT_CHAIN_END_UNITID_BASE
+uses SB_HT_CHAIN_ON_BUS0
+uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
+
+uses USE_DCACHE_RAM
+uses DCACHE_RAM_BASE
+uses DCACHE_RAM_SIZE
+uses DCACHE_RAM_GLOBAL_VAR_SIZE
+uses CONFIG_USE_INIT
+
+uses SERIAL_CPU_INIT
+
+uses ENABLE_APIC_EXT_ID
+uses APIC_ID_OFFSET
+uses LIFT_BSP_APIC_ID
+
+uses CONFIG_PCI_64BIT_PREF_MEM
+
+uses CONFIG_LB_MEM_TOPK
+
+uses CONFIG_AP_CODE_IN_CAR
+
+uses MEM_TRAIN_SEQ
+
+uses WAIT_BEFORE_CPUS_INIT
+
+uses CONFIG_USE_PRINTK_IN_CAR
+
+###
+### Build options
+###
+
+##
+## ROM_SIZE is the size of boot ROM that this board will use.
+##
+default ROM_SIZE=524288
+#default ROM_SIZE=0x100000
+
+##
+## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+##
+#default FALLBACK_SIZE=131072
+#default FALLBACK_SIZE=0x40000
+
+#FALLBACK: 256K-4K
+default FALLBACK_SIZE=0x3f000
+#FAILOVER: 4K
+default FAILOVER_SIZE=0x01000
+
+#more 1M for pgtbl
+default CONFIG_LB_MEM_TOPK=2048
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+default HAVE_FAILOVER_BOOT=1
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=11
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default HAVE_MP_TABLE=0
+
+## ACPI tables will be included
+default HAVE_ACPI_TABLES=0
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=1
+
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=0
+default CONFIG_MAX_CPUS=2
+default CONFIG_MAX_PHYSICAL_CPUS=1
+default CONFIG_LOGICAL_CPUS=1
+
+#default SERIAL_CPU_INIT=0
+
+default ENABLE_APIC_EXT_ID=0
+default APIC_ID_OFFSET=0x10
+default LIFT_BSP_APIC_ID=1
+
+#CHIP_NAME ?
+default CONFIG_CHIP_NAME=1
+
+#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
+#2G
+#default HW_MEM_HOLE_SIZEK=0x200000
+#1G
+default HW_MEM_HOLE_SIZEK=0x100000
+#512M
+#default HW_MEM_HOLE_SIZEK=0x80000
+
+#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
+#default HW_MEM_HOLE_SIZE_AUTO_INC=1
+
+#Opteron K8 1G HT Support
+default K8_HT_FREQ_1G_SUPPORT=1
+
+#VGA Console
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+
+#default CONFIG_USBDEBUG_DIRECT=0
+
+#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
+default HT_CHAIN_UNITID_BASE=0
+
+#real SB Unit ID, default is 0x20, mean dont touch it at last
+#default HT_CHAIN_END_UNITID_BASE=0x6
+
+#make the SB HT chain on bus 0, default is not (0)
+default SB_HT_CHAIN_ON_BUS0=2
+
+#only offset for SB chain?, default is yes(1)
+default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+
+#allow capable device use that above 4G
+#default CONFIG_PCI_64BIT_PREF_MEM=1
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default USE_DCACHE_RAM=1
+default DCACHE_RAM_BASE=0xc8000
+default DCACHE_RAM_SIZE=0x08000
+default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
+default CONFIG_USE_INIT=0
+
+default CONFIG_AP_CODE_IN_CAR=0
+default MEM_TRAIN_SEQ=2
+default WAIT_BEFORE_CPUS_INIT=0
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+default MAINBOARD_PART_NUMBER="SiS"
+default MAINBOARD_VENDOR="SIS"
+default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1039
+default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1234
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 32K heap
+##
+default HEAP_SIZE=0x8000
+
+##
+## Only use the option table in a normal image
+##
+default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
+
+##
+## LinuxBIOS C code runs at this location in RAM
+##
+default _RAMBASE=0x00100000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_PAYLOAD = 1
+
+#default CONFIG_COMPRESSED_PAYLOAD_NRV2B = 1
+
+###
+### Defaults of options that you may want to override in the target config file
+###
+
+##
+## The default compiler
+##
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=0
+
+##
+## The Serial Console
+##
+default CONFIG_USE_PRINTK_IN_CAR=1
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+default DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default MAXIMUM_CONSOLE_LOGLEVEL=8
+
+##
+## Select power on after power fail setting
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+### End Options.lb
+end
diff --git a/src/mainboard/sis/sis761/apc_auto.c b/src/mainboard/sis/sis761/apc_auto.c
new file mode 100644
index 0000000000..7e4eddaa5c
--- /dev/null
+++ b/src/mainboard/sis/sis761/apc_auto.c
@@ -0,0 +1,132 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+#define __ROMCC__
+
+#define RAMINIT_SYSINFO 1
+#define CACHE_AS_RAM_ADDRESS_DEBUG 0
+
+#define SET_NB_CFG_54 1
+
+//used by raminit
+#define QRANK_DIMM_SUPPORT 1
+
+#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+
+#if CONFIG_USE_INIT == 0
+ #include "lib/memcpy.c"
+#endif
+
+#include "arch/i386/lib/console.c"
+
+#if 0
+static void post_code(uint8_t value) {
+#if 1
+ int i;
+ for(i=0;i<0x80000;i++) {
+ outb(value, 0x80);
+ }
+#endif
+}
+#endif
+
+#include <cpu/amd/model_fxx_rev.h>
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+
+#include "lib/delay.c"
+
+//#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+
+#include "northbridge/amd/amdk8/debug.c"
+
+#include "southbridge/sis/sis966/sis966_early_ctrl.c"
+
+#include "northbridge/amd/amdk8/amdk8_f.h"
+
+#include "cpu/x86/mtrr.h"
+#include "cpu/amd/mtrr.h"
+#include "cpu/x86/tsc.h"
+
+#include "northbridge/amd/amdk8/amdk8_f_pci.c"
+#include "northbridge/amd/amdk8/raminit_f_dqs.c"
+
+#include "cpu/amd/dualcore/dualcore.c"
+
+void hardwaremain(int ret_addr)
+{
+ struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
+ struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
+
+ struct node_core_id id;
+
+ id = get_node_core_id_x();
+
+ //FIXME: for USBDEBUG_DIRECT you need to make sure dbg_info get assigned in AP
+ print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n");
+
+ train_ram(id.nodeid, sysinfo, sysinfox);
+
+ /*
+ go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp
+ */
+
+ __asm__ volatile (
+ "movl %0, %%edi\n\t"
+ "jmp *%%edi\n\t"
+ :: "a"(ret_addr)
+ );
+
+
+
+}
+struct eregs {
+ uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi;
+ uint32_t vector;
+ uint32_t error_code;
+ uint32_t eip;
+ uint32_t cs;
+ uint32_t eflags;
+};
+
+void x86_exception(struct eregs *info)
+{
+ do {
+ hlt();
+ } while(1);
+}
+
+
diff --git a/src/mainboard/sis/sis761/cache_as_ram_auto.c b/src/mainboard/sis/sis761/cache_as_ram_auto.c
new file mode 100644
index 0000000000..732027adca
--- /dev/null
+++ b/src/mainboard/sis/sis761/cache_as_ram_auto.c
@@ -0,0 +1,372 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+#define __ROMCC__
+
+#define RAMINIT_SYSINFO 1
+
+#define K8_ALLOCATE_IO_RANGE 1
+//#define K8_SCAN_PCI_BUS 1
+
+
+#define QRANK_DIMM_SUPPORT 1
+
+#if CONFIG_LOGICAL_CPUS==1
+#define SET_NB_CFG_54 1
+#endif
+
+//used by init_cpus and fidvid
+#define K8_SET_FIDVID 1
+//if we want to wait for core1 done before DQS training, set it to 0
+#define K8_SET_FIDVID_CORE0_ONLY 1
+
+#if K8_REV_F_SUPPORT == 1
+#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
+#endif
+
+#define DBGP_DEFAULT 7
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+
+#if USE_FAILOVER_IMAGE==0
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#if CONFIG_USBDEBUG_DIRECT
+#include "southbridge/sis/sis966/sis966_enable_usbdebug_direct.c"
+#include "pc80/usbdebug_direct_serial.c"
+#endif
+#include "ram/ramtest.c"
+
+#include <cpu/amd/model_fxx_rev.h>
+
+#include "southbridge/sis/sis966/sis966_early_smbus.c"
+#include "southbridge/sis/sis966/sis966_enable_rom.c"
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
+
+#endif
+
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "superio/ite/it8716f/it8716f_early_serial.c"
+#include "superio/ite/it8716f/it8716f_early_init.c"
+
+#if USE_FAILOVER_IMAGE==0
+
+#include "cpu/x86/bist.h"
+
+#if CONFIG_USE_INIT == 0
+ #include "lib/memcpy.c"
+#endif
+
+#include "northbridge/amd/amdk8/debug.c"
+
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+
+#include "northbridge/amd/amdk8/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1)
+
+#include "southbridge/sis/sis966/sis966_early_ctrl.c"
+
+static void memreset_setup(void)
+{
+}
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+ /* nothing to do */
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#include "northbridge/amd/amdk8/amdk8_f.h"
+#include "northbridge/amd/amdk8/coherent_ht.c"
+
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+
+#include "northbridge/amd/amdk8/raminit_f.c"
+
+#include "sdram/generic_sdram.c"
+
+#include "resourcemap.c"
+
+#include "cpu/amd/dualcore/dualcore.c"
+
+#define SIS966_NUM 1
+#define SIS966_USE_NIC 1
+#define SIS966_USE_AZA 1
+
+#define SIS966_PCI_E_X_0 0
+
+#define SIS966_MB_SETUP \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
+
+#include "southbridge/sis/sis966/sis966_early_setup_ss.h"
+#include "southbridge/sis/sis966/sis966_early_setup_car.c"
+
+#include "cpu/amd/car/copy_and_run.c"
+
+#include "cpu/amd/car/post_cache_as_ram.c"
+
+#include "cpu/amd/model_fxx/init_cpus.c"
+
+#include "cpu/amd/model_fxx/fidvid.c"
+
+#endif
+
+#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1))
+
+#include "southbridge/sis/sis966/sis966_enable_rom.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+
+
+static void sio_setup(void)
+{
+
+ unsigned value;
+ uint32_t dword;
+ uint8_t byte;
+
+ byte = pci_read_config8(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0x7b, byte);
+
+ dword = pci_read_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa0);
+ dword |= (1<<0);
+ pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa0, dword);
+
+ dword = pci_read_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa4);
+ dword |= (1<<16);
+ pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa4, dword);
+}
+
+void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ unsigned last_boot_normal_x = last_boot_normal();
+
+ /* Is this a cpu only reset? or Is this a secondary cpu? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal_x) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the sis966 */
+ sis966_enable_rom();
+
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal_x) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
+ normal_image:
+ __asm__ volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ );
+
+ fallback_image:
+#if HAVE_FAILOVER_BOOT==1
+ __asm__ volatile ("jmp __fallback_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ )
+#endif
+ ;
+}
+#endif
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+#if HAVE_FAILOVER_BOOT==1
+ #if USE_FAILOVER_IMAGE==1
+ failover_process(bist, cpu_init_detectedx);
+ #else
+ real_main(bist, cpu_init_detectedx);
+ #endif
+#else
+ #if USE_FALLBACK_IMAGE == 1
+ failover_process(bist, cpu_init_detectedx);
+ #endif
+ real_main(bist, cpu_init_detectedx);
+#endif
+}
+
+#if USE_FAILOVER_IMAGE==0
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ static const uint16_t spd_addr [] = {
+ (0xa<<3)|0, (0xa<<3)|2, 0, 0,
+ (0xa<<3)|1, (0xa<<3)|3, 0, 0,
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+ (0xa<<3)|4, (0xa<<3)|6, 0, 0,
+ (0xa<<3)|5, (0xa<<3)|7, 0, 0,
+#endif
+ };
+
+ struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+
+ int needs_reset = 0;
+ unsigned bsp_apicid = 0;
+
+ if (bist == 0) {
+ bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+ }
+
+ pnp_enter_ext_func_mode(SERIAL_DEV);
+ pnp_write_config(SERIAL_DEV, 0x23, 0);
+ it8716f_enable_dev(SERIAL_DEV, TTYS0_BASE);
+ pnp_exit_ext_func_mode(SERIAL_DEV);
+
+ setup_mb_resource_map();
+
+ uart_init();
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
+
+#if CONFIG_USBDEBUG_DIRECT
+ sis966_enable_usbdebug_direct(DBGP_DEFAULT);
+ early_usbdebug_direct_init();
+#endif
+ console_init();
+ print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n");
+
+ print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n");
+
+#if MEM_TRAIN_SEQ == 1
+ set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
+#endif
+ setup_coherent_ht_domain(); // routing table and start other core0
+
+ wait_all_core0_started();
+#if CONFIG_LOGICAL_CPUS==1
+ // It is said that we should start core1 after all core0 launched
+ /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
+ * So here need to make sure last core0 is started, esp for two way system,
+ * (there may be apic id conflicts in that case)
+ */
+ start_other_cores();
+ wait_all_other_cores_started(bsp_apicid);
+#endif
+
+ /* it will set up chains and store link pair for optimization later */
+ ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
+
+#if K8_SET_FIDVID == 1
+
+ {
+ msr_t msr;
+ msr=rdmsr(0xc0010042);
+ print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
+
+ }
+
+ enable_fid_change();
+
+ enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+
+ init_fidvid_bsp(bsp_apicid);
+
+ // show final fid and vid
+ {
+ msr_t msr;
+ msr=rdmsr(0xc0010042);
+ print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
+
+ }
+#endif
+
+ needs_reset |= optimize_link_coherent_ht();
+ needs_reset |= optimize_link_incoherent_ht(sysinfo);
+ needs_reset |= sis966_early_setup_x();
+
+ // fidvid change will issue one LDTSTOP and the HT change will be effective too
+ if (needs_reset) {
+ print_info("ht reset -\r\n");
+ soft_reset();
+ }
+ allow_all_aps_stop(bsp_apicid);
+
+ //It's the time to set ctrl in sysinfo now;
+ fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+
+ sis_init_stage1();
+ enable_smbus();
+
+ memreset_setup();
+
+ //do we need apci timer, tsc...., only debug need it for better output
+ /* all ap stopped? */
+// init_timer(); // Need to use TMICT to synconize FID/VID
+
+ sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
+
+ sis_init_stage2();
+ post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
+
+}
+
+
+#endif
diff --git a/src/mainboard/sis/sis761/chip.h b/src/mainboard/sis/sis761/chip.h
new file mode 100644
index 0000000000..8d6d00cac6
--- /dev/null
+++ b/src/mainboard/sis/sis761/chip.h
@@ -0,0 +1,29 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_sis_sis761_ops;
+
+struct mainboard_sis_sis761_config {
+// int fixup_scsi;
+// int fixup_vga;
+};
diff --git a/src/mainboard/sis/sis761/cmos.layout b/src/mainboard/sis/sis761/cmos.layout
new file mode 100644
index 0000000000..84a5c52278
--- /dev/null
+++ b/src/mainboard/sis/sis761/cmos.layout
@@ -0,0 +1,119 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 AMD
+## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 dual_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 reserved_memory
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 200Mhz
+8 1 166Mhz
+8 2 133Mhz
+8 3 100Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/sis/sis761/get_bus_conf.c b/src/mainboard/sis/sis761/get_bus_conf.c
new file mode 100644
index 0000000000..d8b0c0ab5a
--- /dev/null
+++ b/src/mainboard/sis/sis761/get_bus_conf.c
@@ -0,0 +1,148 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/dualcore.h>
+#endif
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+
+// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
+//busnum is default
+ unsigned char bus_isa;
+ unsigned char bus_sis966[8]; //1
+ unsigned apicid_sis966;
+
+
+unsigned pci1234x[] =
+{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
+ //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+ 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0
+};
+unsigned hcdnx[] =
+{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
+ 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
+};
+unsigned bus_type[256];
+
+extern void get_sblk_pci1234(void);
+
+static unsigned get_bus_conf_done = 0;
+
+void get_bus_conf(void)
+{
+
+ unsigned apicid_base;
+ unsigned sbdn;
+
+ device_t dev;
+ int i, j;
+
+ if(get_bus_conf_done==1) return; //do it only once
+
+ get_bus_conf_done = 1;
+
+ sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]);
+ for(i=0;i<sysconf.hc_possible_num; i++) {
+ sysconf.pci1234[i] = pci1234x[i];
+ sysconf.hcdn[i] = hcdnx[i];
+ }
+
+ get_sblk_pci1234();
+
+ sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
+ sbdn = sysconf.sbdn;
+
+ for(i=0; i<8; i++) {
+ bus_sis966[i] = 0;
+ }
+
+ for(i=0;i<256; i++) {
+ bus_type[i] = 0;
+ }
+
+ bus_type[0] = 1; //pci
+
+ bus_sis966[0] = (sysconf.pci1234[0] >> 16) & 0xff;
+
+ bus_type[bus_sis966[0]] = 1;
+
+ /* SIS966 */
+ dev = dev_find_slot(bus_sis966[0], PCI_DEVFN(sbdn + 0x06,0));
+ if (dev) {
+ bus_sis966[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_sis966[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_sis966[2]++;
+ for(j=bus_sis966[1];j<bus_sis966[2]; j++) bus_type[j] = 1;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06);
+
+ bus_sis966[1] = 2;
+ bus_sis966[2] = 3;
+ }
+
+ for(i=2; i<8;i++) {
+ dev = dev_find_slot(bus_sis966[0], PCI_DEVFN(sbdn + 0x0a + i - 2 , 0));
+ if (dev) {
+ bus_sis966[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ for(j=bus_sis966[i];j<bus_isa; j++) bus_type[j] = 1;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_sis966[0], sbdn + 0x0a + i - 2 );
+ bus_isa = bus_sis966[i-1]+1;
+ }
+ }
+
+
+/*I/O APICs: APIC ID Version State Address*/
+#if CONFIG_LOGICAL_CPUS==1
+ apicid_base = get_apicid_base(1);
+#else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#endif
+ apicid_sis966 = apicid_base+0;
+
+}
diff --git a/src/mainboard/sis/sis761/irq_tables.c b/src/mainboard/sis/sis761/irq_tables.c
new file mode 100644
index 0000000000..c87b9d6954
--- /dev/null
+++ b/src/mainboard/sis/sis761/irq_tables.c
@@ -0,0 +1,166 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This file was generated by getpir.c, do not modify!
+ (but if you do, please run checkpir on it to verify)
+ Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+ Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
+ uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
+ uint8_t slot, uint8_t rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+extern unsigned char bus_isa;
+extern unsigned char bus_sis966[8]; //1
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ unsigned slot_num;
+ uint8_t *v;
+ unsigned sbdn;
+
+ uint8_t sum=0;
+ int i;
+
+ get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+ sbdn = sysconf.sbdn;
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk_info("Writing IRQ routing tables to 0x%x...", addr);
+
+ pirq = (void *)(addr);
+ v = (uint8_t *)(addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = bus_sis966[0];
+ pirq->rtr_devfn = ((sbdn+6)<<3)|0;
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x10de;
+ pirq->rtr_device = 0x0370;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *) ( &pirq->checksum + 1);
+ slot_num = 0;
+
+ {
+ device_t dev;
+ dev = dev_find_slot(0, PCI_DEVFN(2,0));
+ if (dev) {
+ /* initialize PCI interupts - these assignments depend
+ on the PCB routing of PINTA-D
+
+ PINTA = IRQ10
+ PINTB = IRQ11
+ PINTC = IRQ5
+ PINTD = IRQ5
+ PINTE = IRQ11
+ PINTF = IRQ5
+ PINTG = IRQ10
+ PINTH = IRQ5
+
+ */
+ int i;
+ uint8_t reg[8]={0x41,0x42,0x43,0x44,0x60,0x61,0x62,0x63};
+ uint8_t irq[8]={0x0A,0X0B,0X05,0X05,0X0B,0X05,0X0A,0X0A};
+
+ for(i=0;i<8;i++)
+ pci_write_config8(dev, reg[i], irq[i]);
+ }
+
+ printk_debug("Setting Onboard SiS Southbridge\n");
+// dev = dev_find_slot(0, PCI_DEVFN(2,5)); // 5513 (IDE)
+// pci_write_config8(dev, 0x3C, 0x0A);
+ dev = dev_find_slot(0, PCI_DEVFN(3,0)); // USB 1.1 -1
+ pci_write_config8(dev, 0x3C, 0x0B);
+ dev = dev_find_slot(0, PCI_DEVFN(3,1)); // USB 1.1 -2
+ pci_write_config8(dev, 0x3C, 0x05);
+ dev = dev_find_slot(0, PCI_DEVFN(3,3)); // USB 2.0
+ pci_write_config8(dev, 0x3C, 0x0A);
+ dev = dev_find_slot(0, PCI_DEVFN(4,0)); // 191 (LAN)
+ pci_write_config8(dev, 0x3C, 0x05);
+ dev = dev_find_slot(0, PCI_DEVFN(5,0)); // 1183 (SATA)
+ pci_write_config8(dev, 0x3C, 0x0B);
+// dev = dev_find_slot(0, PCI_DEVFN(6,0)); // PCI-E
+// pci_write_config8(dev, 0x3C, 0x0A);
+// dev = dev_find_slot(0, PCI_DEVFN(7,0)); // PCI-E
+// pci_write_config8(dev, 0x3C, 0x0A);
+ dev = dev_find_slot(0, PCI_DEVFN(15,0)); // Azalia
+ pci_write_config8(dev, 0x3C, 0x05);
+ }
+
+//pci bridge
+ write_pirq_info(pirq_info, bus_sis966[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk_info("done.\n");
+
+ return (unsigned long) pirq_info;
+
+}
diff --git a/src/mainboard/sis/sis761/mainboard.c b/src/mainboard/sis/sis761/mainboard.c
new file mode 100644
index 0000000000..9e21efdce8
--- /dev/null
+++ b/src/mainboard/sis/sis761/mainboard.c
@@ -0,0 +1,35 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "chip.h"
+
+#if CONFIG_CHIP_NAME == 1
+struct chip_operations mainboard_sis_sis761_ops = {
+ CHIP_NAME("SiS SiS761GX/SiS966 Mainboard")
+};
+#endif
diff --git a/src/mainboard/sis/sis761/mptable.c b/src/mainboard/sis/sis761/mptable.c
new file mode 100644
index 0000000000..047a187aaa
--- /dev/null
+++ b/src/mainboard/sis/sis761/mptable.c
@@ -0,0 +1,161 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+
+#include <cpu/amd/amdk8_sysconf.h>
+extern unsigned char bus_isa;
+extern unsigned char bus_sis966[8]; //1
+
+extern unsigned apicid_sis966;
+
+extern unsigned bus_type[256];
+
+void *smp_write_config_table(void *v)
+{
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "SIS";
+ static const char productid[12] = "SiS761GX";
+ struct mp_config_table *mc;
+ unsigned sbdn;
+
+ int i,j;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
+
+ get_bus_conf();
+ sbdn = sysconf.sbdn;
+
+/*Bus: Bus ID Type*/
+ /* define bus and isa numbers */
+ for(j= 0; j < 256 ; j++) {
+ if(bus_type[j])
+ smp_write_bus(mc, j, "PCI ");
+ }
+ smp_write_bus(mc, bus_isa, "ISA ");
+
+/*I/O APICs: APIC ID Version State Address*/
+ {
+ device_t dev;
+ struct resource *res;
+ uint32_t dword;
+
+ dev = dev_find_slot(bus_sis966[0], PCI_DEVFN(sbdn+ 0x1,0));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_1);
+ if (res) {
+ smp_write_ioapic(mc, apicid_sis966, 0x11, res->base);
+ }
+
+ dword = 0x43c6c643;
+ pci_write_config32(dev, 0x7c, dword);
+
+ dword = 0x81001a00;
+ pci_write_config32(dev, 0x80, dword);
+
+ dword = 0xd0001202;
+ pci_write_config32(dev, 0x84, dword);
+
+ }
+ }
+
+/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
+*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_sis966, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_sis966, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_sis966, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_sis966, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid_sis966, 0x4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, apicid_sis966, 0x6);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, apicid_sis966, 0x7);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, apicid_sis966, 0x8);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid_sis966, 0xc);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_sis966, 0xd);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_sis966, 0xe);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_sis966, 0xf);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sis966[0], ((sbdn+1)<<2)|1, apicid_sis966, 0xa);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sis966[0], ((sbdn+2)<<2)|0, apicid_sis966, 0x16); // 22
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sis966[0], ((sbdn+2)<<2)|1, apicid_sis966, 0x17); // 23
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sis966[0], ((sbdn+6)<<2)|1, apicid_sis966, 0x17); // 23
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sis966[0], ((sbdn+5)<<2)|0, apicid_sis966, 0x14); // 20
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sis966[0], ((sbdn+5)<<2)|1, apicid_sis966, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sis966[0], ((sbdn+5)<<2)|2, apicid_sis966, 0x15); // 21
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sis966[0], ((sbdn+8)<<2)|0, apicid_sis966, 0x16); // 22
+
+ for(j=7; j>=2; j--) {
+ if(!bus_sis966[j]) continue;
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sis966[j], (0x00<<2)|i, apicid_sis966, 0x10 + (2+j+i+4-sbdn%4)%4);
+ }
+ }
+
+ for(j=0; j<2; j++)
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sis966[1], ((0x06+j)<<2)|i, apicid_sis966, 0x10 + (2+i+j)%4);
+ }
+
+/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
+ smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+ printk_debug("Wrote the mp table end at: %p - %p\n",
+ mc, smp_next_mpe_entry(mc));
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/sis/sis761/resourcemap.c b/src/mainboard/sis/sis761/resourcemap.c
new file mode 100644
index 0000000000..7e23ad9cc9
--- /dev/null
+++ b/src/mainboard/sis/sis761/resourcemap.c
@@ -0,0 +1,283 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+static void setup_mb_resource_map(void)
+{
+ static const unsigned int register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration region i
+ */
+// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of cpu 0 --> Nvidia MCP55 */
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+
+ };
+
+ int max;
+ max = sizeof(register_values)/sizeof(register_values[0]);
+ setup_resource_map(register_values, max);
+}
+
diff --git a/src/southbridge/sis/sis966/Config.lb b/src/southbridge/sis/sis966/Config.lb
new file mode 100644
index 0000000000..565de1aa81
--- /dev/null
+++ b/src/southbridge/sis/sis966/Config.lb
@@ -0,0 +1,37 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+## Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+config chip.h
+#driver sis_agp.o
+driver sisnb.o
+driver sis966.o
+driver sis966_usb.o
+driver sis966_lpc.o
+driver sis966_smbus.o
+driver sis966_ide.o
+driver sis966_sata.o
+driver sis966_usb2.o
+driver sis966_aza.o
+driver sis966_nic.o
+driver sis966_pci.o
+driver sis966_pcie.o
+driver sis966_ht.o
+object sis966_reset.o
diff --git a/src/southbridge/sis/sis966/chip.h b/src/southbridge/sis/sis966/chip.h
new file mode 100644
index 0000000000..0bda235533
--- /dev/null
+++ b/src/southbridge/sis/sis966/chip.h
@@ -0,0 +1,39 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SIS966_CHIP_H
+#define SIS966_CHIP_H
+
+struct southbridge_sis_sis966_config
+{
+ unsigned int ide0_enable : 1;
+ unsigned int ide1_enable : 1;
+ unsigned int sata0_enable : 1;
+ unsigned int sata1_enable : 1;
+ unsigned int mac_eeprom_smbus;
+ unsigned int mac_eeprom_addr;
+};
+struct chip_operations;
+extern struct chip_operations southbridge_sis_sis966_ops;
+
+#endif /* SIS966_CHIP_H */
diff --git a/src/southbridge/sis/sis966/id.inc b/src/southbridge/sis/sis966/id.inc
new file mode 100644
index 0000000000..5d3a16063f
--- /dev/null
+++ b/src/southbridge/sis/sis966/id.inc
@@ -0,0 +1,36 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+ .section ".id", "a", @progbits
+
+ .globl __id_start
+__id_start:
+vendor:
+ .asciz MAINBOARD_VENDOR
+part:
+ .asciz MAINBOARD_PART_NUMBER
+.long __id_end + 0x80 - vendor /* Reverse offset to the vendor id */
+.long __id_end + 0x80 - part /* Reverse offset to the part number */
+.long PAYLOAD_SIZE + ROM_IMAGE_SIZE /* Size of this romimage */
+ .globl __id_end
+
+__id_end:
+.previous
diff --git a/src/southbridge/sis/sis966/id.lds b/src/southbridge/sis/sis966/id.lds
new file mode 100644
index 0000000000..5fc740fdc2
--- /dev/null
+++ b/src/southbridge/sis/sis966/id.lds
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+SECTIONS {
+ . = (_ROMBASE + ROM_IMAGE_SIZE - 0x80) - (__id_end - __id_start);
+ .id (.): {
+ *(.id)
+ }
+}
diff --git a/src/southbridge/sis/sis966/romstrap.inc b/src/southbridge/sis/sis966/romstrap.inc
new file mode 100644
index 0000000000..e1773b6200
--- /dev/null
+++ b/src/southbridge/sis/sis966/romstrap.inc
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+ .section ".romstrap", "a", @progbits
+
+
+ .globl __romstrap_start
+__romstrap_start:
+rstables:
+ .long 0x2b16d065
+ .long 0x0
+ .long 0x0
+ .long linkedlist
+
+linkedlist:
+ .long 0x0003001C // 10h
+ .long 0x08000000 // 14h
+ .long 0x00000000 // 18h
+ .long 0xFFFFFFFF // 1Ch
+
+ .long 0xFFFFFFFF // 20h
+ .long 0xFFFFFFFF // 24h
+ .long 0xFFFFFFFF // 28h
+ .long 0xFFFFFFFF // 2Ch
+
+// MAC address -------------------------------- 0x7FFC0h
+ .long 0x56341200 // 30h, MAC address low 4 byte ---> keep it in 0xffffffc0
+ .long 0x00009078 // 34h, MAC address high 4 byte
+
+ .long 0x002309CE // 38h, UUID low 4 byte
+ .long 0x00E08100 // 3Ch, UUID high 4 byte
+
+
+// Firmware Trap -------------------------------- 0x7FFD0h
+/*
+//Firmware trap for SiS761+966
+ .long 0x00402000
+ .long 0x6043A800
+ .long 0x00180000
+ .long 0x1421C402
+*/
+
+//Firmware trap for SiS756+966 ---> keep it in 0xffffffd0
+ .long 0x00402000
+ .long 0xE043A800
+ .long 0x00180000
+ .long 0x1421C402
+
+rspointers:
+ .long rstables // It will be 0xffffffe0
+ .long rstables
+ .long rstables
+ .long rstables
+
+ .globl __romstrap_end
+
+__romstrap_end:
+.previous
diff --git a/src/southbridge/sis/sis966/romstrap.lds b/src/southbridge/sis/sis966/romstrap.lds
new file mode 100644
index 0000000000..e100570cf2
--- /dev/null
+++ b/src/southbridge/sis/sis966/romstrap.lds
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+SECTIONS {
+ . = (_ROMBASE + ROM_IMAGE_SIZE - 0x10) - (__romstrap_end - __romstrap_start);
+ .romstrap (.): {
+ *(.romstrap)
+ }
+}
diff --git a/src/southbridge/sis/sis966/sis966.c b/src/southbridge/sis/sis966/sis966.c
new file mode 100644
index 0000000000..b2ce896699
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966.c
@@ -0,0 +1,253 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+
+#include <arch/io.h>
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sis966.h"
+
+static uint32_t final_reg;
+
+static device_t find_lpc_dev( device_t dev, unsigned devfn)
+{
+
+ device_t lpc_dev;
+
+ lpc_dev = dev_find_slot(dev->bus->secondary, devfn);
+
+ if ( !lpc_dev ) return lpc_dev;
+
+if ((lpc_dev->vendor != PCI_VENDOR_ID_SIS) || (
+ (lpc_dev->device != PCI_DEVICE_ID_SIS_SIS966_LPC)
+ ) ) {
+ uint32_t id;
+ id = pci_read_config32(lpc_dev, PCI_VENDOR_ID);
+ if ( (id < (PCI_VENDOR_ID_SIS | (PCI_DEVICE_ID_SIS_SIS966_LPC << 16)))
+ ) {
+ lpc_dev = 0;
+ }
+ }
+
+ return lpc_dev;
+}
+
+void sis966_enable(device_t dev)
+{
+ device_t lpc_dev = 0;
+ device_t sm_dev = 0;
+ unsigned index = 0;
+ unsigned index2 = 0;
+ uint32_t reg_old, reg;
+ uint8_t byte;
+ unsigned deviceid;
+ unsigned vendorid;
+
+ struct southbridge_sis_sis966_config *conf;
+ conf = dev->chip_info;
+ int i;
+
+ unsigned devfn;
+
+ if(dev->device==0x0000) {
+ vendorid = pci_read_config32(dev, PCI_VENDOR_ID);
+ deviceid = (vendorid>>16) & 0xffff;
+// vendorid &= 0xffff;
+ } else {
+// vendorid = dev->vendor;
+ deviceid = dev->device;
+ }
+
+ devfn = (dev->path.u.pci.devfn) & ~7;
+ switch(deviceid) {
+ case PCI_DEVICE_ID_SIS_SIS966_HT:
+ return;
+
+ case PCI_DEVICE_ID_SIS_SIS966_SM2://?
+ index = 16;
+ break;
+ case PCI_DEVICE_ID_SIS_SIS966_USB:
+ devfn -= (1<<3);
+ index = 8;
+ break;
+ case PCI_DEVICE_ID_SIS_SIS966_EHCI:
+ devfn -= (1<<3);
+ index = 20;
+ break;
+/* case PCI_DEVICE_ID_SIS_SIS966_USB3:
+ devfn -= (1<<3);
+ index = 20;
+ break;
+*/
+ case PCI_DEVICE_ID_SIS_SIS966_NIC1: //two
+ case PCI_DEVICE_ID_SIS_SIS966_NIC_BRIDGE://two
+ devfn -= (7<<3);
+ index = 10;
+ for(i=0;i<2;i++) {
+ lpc_dev = find_lpc_dev(dev, devfn - (i<<3));
+ if(!lpc_dev) continue;
+ index -= i;
+ devfn -= (i<<3);
+ break;
+ }
+ break;
+ case PCI_DEVICE_ID_SIS_SIS966_AZA:
+ devfn -= (5<<3);
+ index = 11;
+ break;
+ case PCI_DEVICE_ID_SIS_SIS966_IDE:
+ devfn -= (3<<3);
+ index = 14;
+ break;
+ case PCI_DEVICE_ID_SIS_SIS966_SATA0: //three
+ case PCI_DEVICE_ID_SIS_SIS966_SATA1: //three
+ devfn -= (4<<3);
+ index = 22;
+ i = (dev->path.u.pci.devfn) & 7;
+ if(i>0) {
+ index -= (i+3);
+ }
+ break;
+ case PCI_DEVICE_ID_SIS_SIS966_PCI:
+ devfn -= (5<<3);
+ index = 15;
+ break;
+// case PCI_DEVICE_ID_SIS_SIS966_PCIE_A:
+// devfn -= (0x9<<3); // to LPC
+// index2 = 9;
+// break;
+ case PCI_DEVICE_ID_SIS_SIS966_PCIE_B_C: //two
+ devfn -= (0xa<<3); // to LPC
+ index2 = 8;
+ for(i=0;i<2;i++) {
+ lpc_dev = find_lpc_dev(dev, devfn - (i<<3));
+ if(!lpc_dev) continue;
+ index2 -= i;
+ devfn -= (i<<3);
+ break;
+ }
+ break;
+ case PCI_DEVICE_ID_SIS_SIS966_PCIE_D:
+ devfn -= (0xc<<3); // to LPC
+ index2 = 6;
+ break;
+ case PCI_DEVICE_ID_SIS_SIS966_PCIE_E:
+ devfn -= (0xd<<3); // to LPC
+ index2 = 5;
+ break;
+ case PCI_DEVICE_ID_SIS_SIS966_PCIE_F:
+ devfn -= (0xe<<3); // to LPC
+ index2 = 4;
+ break;
+ default:
+ index = 0;
+ }
+
+ if(!lpc_dev)
+ lpc_dev = find_lpc_dev(dev, devfn);
+
+ if ( !lpc_dev ) return;
+
+ if(index2!=0) {
+ sm_dev = dev_find_slot(dev->bus->secondary, devfn + 1);
+ if(!sm_dev) return;
+
+ if ( sm_dev ) {
+ reg_old = reg = pci_read_config32(sm_dev, 0xe4);
+
+ if (!dev->enabled) { //disable it
+ reg |= (1<<index2);
+ }
+
+ if (reg != reg_old) {
+ pci_write_config32(sm_dev, 0xe4, reg);
+ }
+ }
+
+ index2 = 0;
+ return;
+ }
+
+
+ if ( index == 0) { // for LPC
+
+ // expose ioapic base
+ byte = pci_read_config8(lpc_dev, 0x74);
+ byte |= ((1<<1)); // expose the BAR
+ pci_write_config8(dev, 0x74, byte);
+
+ // expose trap base
+ byte = pci_read_config8(lpc_dev, 0xdd);
+ byte |= ((1<<0)|(1<<3)); // expose the BAR and enable write
+ pci_write_config8(dev, 0xdd, byte);
+
+ return;
+
+ }
+
+ if( index == 16) {
+ sm_dev = dev_find_slot(dev->bus->secondary, devfn + 1);
+ if(!sm_dev) return;
+
+ final_reg = pci_read_config32(sm_dev, 0xe8);
+ final_reg &= ~((1<<16)|(1<<8)|(1<<20)|(1<<14)|(1<<22)|(1<<18)|(1<<17)|(1<<15)|(1<<11)|(1<<10)|(1<<9));
+ pci_write_config32(sm_dev, 0xe8, final_reg); //enable all at first
+#if 0
+ reg_old = reg = pci_read_config32(sm_dev, 0xe4);
+// reg |= (1<<0);
+ reg &= ~(0x3f<<4);
+ if (reg != reg_old) {
+ printk_debug("sis966.c pcie enabled\n");
+ pci_write_config32(sm_dev, 0xe4, reg);
+ }
+#endif
+ }
+
+ if (!dev->enabled) {
+ final_reg |= (1 << index);// disable it
+ //The reason for using final_reg, if diable func 1, the func 2 will be func 1 so We need disable them one time.
+ }
+
+ if(index == 9 ) { //NIC1 is the final, We need update final reg to 0xe8
+ sm_dev = dev_find_slot(dev->bus->secondary, devfn + 1);
+ if(!sm_dev) return;
+ reg_old = pci_read_config32(sm_dev, 0xe8);
+ if (final_reg != reg_old) {
+ pci_write_config32(sm_dev, 0xe8, final_reg);
+ }
+
+ }
+
+
+}
+
+struct chip_operations southbridge_sis_sis966_ops = {
+ CHIP_NAME("SiS SiS966 Southbridge")
+ .enable_dev = sis966_enable,
+};
diff --git a/src/southbridge/sis/sis966/sis966.h b/src/southbridge/sis/sis966/sis966.h
new file mode 100644
index 0000000000..98a6aaaeb9
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966.h
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SIS966_H
+#define SIS966_H
+
+#include "chip.h"
+
+void sis966_enable(device_t dev);
+
+#endif /* SIS966_H */
diff --git a/src/southbridge/sis/sis966/sis966_aza.c b/src/southbridge/sis/sis966/sis966_aza.c
new file mode 100644
index 0000000000..48fd0e7288
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_aza.c
@@ -0,0 +1,501 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include "sis966.h"
+
+uint8_t SiS_SiS7502_init[6][3]={
+
+{0x04, 0xFF, 0x07},
+{0x2C, 0xFF, 0x39},
+{0x2D, 0xFF, 0x10},
+{0x2E, 0xFF, 0x91},
+{0x2F, 0xFF, 0x01},
+{0x04, 0xFF, 0x06},
+{0x00, 0x00, 0x00} //End of table
+};
+
+static int set_bits(uint8_t *port, uint32_t mask, uint32_t val)
+{
+ uint32_t dword;
+ int count;
+
+ val &= mask;
+ dword = readl(port);
+ dword &= ~mask;
+ dword |= val;
+ writel(dword, port);
+
+ count = 50;
+ do {
+ dword = readl(port);
+ dword &= mask;
+ udelay(100);
+ } while ((dword != val) && --count);
+
+ if(!count) return -1;
+
+ udelay(540);
+ return 0;
+
+}
+
+ uint32_t send_verb(uint8_t *base, uint32_t verb)
+{
+
+
+ uint32_t dword;
+
+ dword = readl(base + 0x68);
+ dword=dword|(unsigned long)0x0002;
+ writel(dword,base + 0x68);
+ do {
+ dword = readl(base + 0x68);
+ } while ((dword & 1)!=0);
+ writel(verb, base + 0x60);
+ udelay(500);
+ dword = readl(base + 0x68);
+ dword =(dword |0x1);
+ writel(dword, base + 0x68);
+ do {
+ udelay(120);
+ dword = readl(base + 0x68);
+ } while ((dword & 3) != 2);
+
+ dword = readl(base + 0x64);
+ return dword;
+
+}
+
+
+#if 1
+static int codec_detect(uint8_t *base)
+{
+ uint32_t dword;
+ int idx=0;
+
+ /* 1 */ // controller reset
+ printk_debug("controller reset\n");
+
+ set_bits(base + 0x08, 1, 1);
+
+ do{
+ dword = readl(base + 0x08)&0x1;
+ if(idx++>1000) { printk_debug("controller reset fail !!! \n"); break;}
+ } while (dword !=1);
+
+ dword=send_verb(base,0x000F0000); // get codec VendorId and DeviceId
+
+ if(dword==0) {
+ printk_debug("No codec!\n");
+ return 0;
+ }
+
+ printk_debug("Codec ID = %lx\n", dword);
+
+#if 0
+ /* 2 */
+ dword = readl(base + 0x0e);
+ dword |= 7;
+ writel(dword, base + 0x0e);
+
+ /* 3 */
+ set_bits(base + 0x08, 1, 0);
+
+ /* 4 */
+ set_bits(base + 0x08, 1, 1);
+
+ /* 5 */
+ dword = readl(base + 0xe);
+ dword &= 7;
+
+ /* 6 */
+ if(!dword) {
+ set_bits(base + 0x08, 1, 0);
+ printk_debug("No codec!\n");
+ return 0;
+ }
+#endif
+ dword=0x1;
+ return dword;
+
+}
+
+#else
+
+static int codec_detect(uint8_t *base)
+{
+ uint32_t dword;
+
+ /* 1 */
+ set_bits(base + 0x08, 1, 1);
+
+ /* 2 */
+ dword = readl(base + 0x0e);
+ dword |= 7;
+ writel(dword, base + 0x0e);
+
+ /* 3 */
+ set_bits(base + 0x08, 1, 0);
+
+ /* 4 */
+ set_bits(base + 0x08, 1, 1);
+
+ /* 5 */
+ dword = readl(base + 0xe);
+ dword &= 7;
+
+ /* 6 */
+ if(!dword) {
+ set_bits(base + 0x08, 1, 0);
+ printk_debug("No codec!\n");
+ return 0;
+ }
+ return dword;
+
+}
+
+#endif
+
+#if 1
+
+// For SiS demo board PinConfig
+static uint32_t verb_data[] = {
+#if 0
+ 00172083h,
+ 00172108h,
+ 001722ECh,
+ 00172310h,
+#endif
+//14
+ 0x01471c10,
+ 0x01471d40,
+ 0x01471e01,
+ 0x01471f01,
+//15
+ 0x01571c12,
+ 0x01571d10,
+ 0x01571e01,
+ 0x01571f01,
+//16
+ 0x01671c11,
+ 0x01671d60,
+ 0x01671e01,
+ 0x01671f01,
+//17
+ 0x01771c14,
+ 0x01771d20,
+ 0x01771e01,
+ 0x01771f01,
+//18
+ 0x01871c40,
+ 0x01871d98,
+ 0x01871ea1,
+ 0x01871f01,
+//19
+ 0x01971c50,
+ 0x01971d98,
+ 0x01971ea1,
+ 0x01971f02,
+//1a
+ 0x01a71c4f,
+ 0x01a71d30,
+ 0x01a71e81,
+ 0x01a71f01,
+//1b
+ 0x01b71c20,
+ 0x01b71d40,
+ 0x01b71e01,
+ 0x01b71f02,
+//1c
+ 0x01c71cf0,
+ 0x01c71d01,
+ 0x01c71e33,
+ 0x01c71f59,
+//1d
+ 0x01d71c01,
+ 0x01d71de6,
+ 0x01d71e05,
+ 0x01d71f40,
+//1e
+ 0x01e71c30,
+ 0x01e71d11,
+ 0x01e71e44,
+ 0x01e71f01,
+//1f
+ 0x01f71c60,
+ 0x01f71d61,
+ 0x01f71ec4,
+ 0x01f71f01,
+};
+
+#else
+// orginal codec pin configuration setting
+
+static uint32_t verb_data[] = {
+#if 0
+ 0x00172001,
+ 0x001721e6,
+ 0x00172200,
+ 0x00172300,
+#endif
+
+ 0x01471c10,
+ 0x01471d44,
+ 0x01471e01,
+ 0x01471f01,
+//1
+ 0x01571c12,
+ 0x01571d14,
+ 0x01571e01,
+ 0x01571f01,
+//2
+ 0x01671c11,
+ 0x01671d60,
+ 0x01671e01,
+ 0x01671f01,
+//3
+ 0x01771c14,
+ 0x01771d20,
+ 0x01771e01,
+ 0x01771f01,
+//4
+ 0x01871c30,
+ 0x01871d9c,
+ 0x01871ea1,
+ 0x01871f01,
+//5
+ 0x01971c40,
+ 0x01971d9c,
+ 0x01971ea1,
+ 0x01971f02,
+//6
+ 0x01a71c31,
+ 0x01a71d34,
+ 0x01a71e81,
+ 0x01a71f01,
+//7
+ 0x01b71c1f,
+ 0x01b71d44,
+ 0x01b71e21,
+ 0x01b71f02,
+//8
+ 0x01c71cf0,
+ 0x01c71d11,
+ 0x01c71e11,
+ 0x01c71f41,
+//9
+ 0x01d71c3e,
+ 0x01d71d01,
+ 0x01d71e83,
+ 0x01d71f99,
+//10
+ 0x01e71c20,
+ 0x01e71d41,
+ 0x01e71e45,
+ 0x01e71f01,
+//11
+ 0x01f71c50,
+ 0x01f71d91,
+ 0x01f71ec5,
+ 0x01f71f01,
+};
+
+#endif
+static unsigned find_verb(uint32_t viddid, uint32_t **verb)
+{
+ if((viddid == 0x10ec0883) || (viddid == 0x10ec0882) || (viddid == 0x10ec0880)) return 0;
+ *verb = (uint32_t *)verb_data;
+ return sizeof(verb_data)/sizeof(uint32_t);
+}
+
+
+static void codec_init(uint8_t *base, int addr)
+{
+ uint32_t dword;
+ uint32_t *verb;
+ unsigned verb_size;
+ int i;
+
+ /* 1 */
+ do {
+ dword = readl(base + 0x68);
+ } while (dword & 1);
+
+ dword = (addr<<28) | 0x000f0000;
+ writel(dword, base + 0x60);
+
+ do {
+ dword = readl(base + 0x68);
+ } while ((dword & 3)!=2);
+
+ dword = readl(base + 0x64);
+
+ /* 2 */
+ printk_debug("codec viddid: %08x\n", dword);
+ verb_size = find_verb(dword, &verb);
+
+ if(!verb_size) {
+ printk_debug("No verb!\n");
+ return;
+ }
+
+ printk_debug("verb_size: %d\n", verb_size);
+ /* 3 */
+ for(i=0; i<verb_size; i++) {
+ send_verb(base,verb[i]);
+#if 0
+ do {
+ dword = readl(base + 0x68);
+ } while (dword & 1);
+
+ writel(verb[i], base + 0x60);
+
+ do {
+ dword = readl(base + 0x68);
+ } while ((dword & 3) != 2);
+#endif
+ }
+ printk_debug("verb loaded!\n");
+}
+
+static void codecs_init(uint8_t *base, uint32_t codec_mask)
+{
+ int i;
+ codec_init(base, 0);
+ return;
+ for(i=2; i>=0; i--) {
+ if( codec_mask & (1<<i) )
+ codec_init(base, i);
+ }
+}
+
+static void aza_init(struct device *dev)
+{
+ uint8_t *base;
+ struct resource *res;
+ uint32_t codec_mask;
+
+
+//-------------- enable AZA (SiS7502) -------------------------
+{
+ uint8_t temp8;
+ int i=0;
+ while(SiS_SiS7502_init[i][0] != 0)
+ { temp8 = pci_read_config8(dev, SiS_SiS7502_init[i][0]);
+ temp8 &= SiS_SiS7502_init[i][1];
+ temp8 |= SiS_SiS7502_init[i][2];
+ pci_write_config8(dev, SiS_SiS7502_init[i][0], temp8);
+ i++;
+ };
+}
+//-----------------------------------------------------------
+
+
+// put audio to D0 state
+pci_write_config8(dev, 0x54,0x00);
+
+#if 0
+{
+ int i;
+ printk_debug("Azalia PCI config \n");
+ for(i=0;i<0xFF;i+=4)
+ {
+ if((i%16)==0)
+ {
+ print_debug("\r\n");print_debug_hex8(i);print_debug(" ");
+ }
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+ }
+ print_debug("\r\n");
+}
+#endif
+
+ res = find_resource(dev, 0x10);
+ if(!res)
+ return;
+
+ base =(uint8_t *) res->base;
+ printk_debug("base = %08x\n", base);
+
+ codec_mask = codec_detect(base);
+
+ if(codec_mask) {
+ printk_debug("codec_mask = %02x\n", codec_mask);
+ codecs_init(base, codec_mask);
+ }
+
+#if 0
+{
+ int i;
+ printk_debug("Azalia PCI config \n");
+ for(i=0;i<0xFF;i+=4)
+ {
+ if((i%16)==0)
+ {
+ print_debug("\r\n");print_debug_hex8(i);print_debug(" ");
+ }
+ outl(0x80000800+i,0xcf8);
+ print_debug_hex32(inl(0xcfc));
+ print_debug(" ");
+ }
+ print_debug("\r\n");
+}
+#endif
+
+}
+
+static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ pci_write_config32(dev, 0x40,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = lpci_set_subsystem,
+};
+
+static struct device_operations aza_audio_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+// .enable = sis966_enable,
+ .init = aza_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver azaaudio_driver __pci_driver = {
+ .ops = &aza_audio_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_AZA,
+};
+
diff --git a/src/southbridge/sis/sis966/sis966_early_ctrl.c b/src/southbridge/sis/sis966/sis966_early_ctrl.c
new file mode 100644
index 0000000000..3d6abc7561
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_early_ctrl.c
@@ -0,0 +1,60 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+static unsigned get_sbdn(unsigned bus)
+{
+ device_t dev;
+
+ /* Find the device.
+ */
+ dev = pci_locate_device_on_bus(
+ PCI_ID(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_SIS_SIS966_HT),
+ bus);
+
+ return (dev>>15) & 0x1f;
+
+}
+
+static void hard_reset(void)
+{
+ set_bios_reset();
+
+ /* full reset */
+ outb(0x0a, 0x0cf9);
+ outb(0x0e, 0x0cf9);
+}
+static void enable_fid_change_on_sb(unsigned sbbusn, unsigned sbdn)
+{
+/* default value for sis966 is good */
+ /* set VFSMAF ( VID/FID System Management Action Field) to 2 */
+
+}
+
+static void soft_reset(void)
+{
+ set_bios_reset();
+#if 1
+ /* link reset */
+ outb(0x02, 0x0cf9);
+ outb(0x06, 0x0cf9);
+#endif
+}
+
diff --git a/src/southbridge/sis/sis966/sis966_early_setup_car.c b/src/southbridge/sis/sis966/sis966_early_setup_car.c
new file mode 100644
index 0000000000..370951a2d5
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_early_setup_car.c
@@ -0,0 +1,429 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2006 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+static int set_ht_link_sis966(uint8_t ht_c_num)
+{
+ unsigned vendorid = 0x10de;
+ unsigned val = 0x01610109;
+ /* Nvidia sis966 hardcode, hw can not set it automatically */
+ return set_ht_link_buffer_counts_chain(ht_c_num, vendorid, val);
+}
+
+static void setup_ss_table(unsigned index, unsigned where, unsigned control, const unsigned int *register_values, int max)
+{
+ int i;
+
+ unsigned val;
+
+ val = inl(control);
+ val &= 0xfffffffe;
+ outl(val, control);
+
+ outl(0, index); //index
+ for(i = 0; i < max; i++) {
+ unsigned long reg;
+ reg = register_values[i];
+ outl(reg, where);
+ }
+
+ val = inl(control);
+ val |= 1;
+ outl(val, control);
+
+}
+
+/* SIZE 0x100 */
+#define ANACTRL_IO_BASE 0x2800
+#define ANACTRL_REG_POS 0x68
+
+/* SIZE 0x100 */
+#define SYSCTRL_IO_BASE 0x2400
+#define SYSCTRL_REG_POS 0x64
+
+/* SIZE 0x100 */
+#define ACPICTRL_IO_BASE 0x2000
+#define ACPICTRL_REG_POS 0x60
+
+/*
+ 16 1 1 1 1 8 :0
+ 16 0 4 0 0 8 :1
+ 16 0 4 2 2 4 :2
+ 4 4 4 4 4 8 :3
+ 8 8 4 0 0 8 :4
+ 8 0 4 4 4 8 :5
+*/
+
+#ifndef SIS966_PCI_E_X_0
+ #define SIS966_PCI_E_X_0 4
+#endif
+#ifndef SIS966_PCI_E_X_1
+ #define SIS966_PCI_E_X_1 4
+#endif
+#ifndef SIS966_PCI_E_X_2
+ #define SIS966_PCI_E_X_2 4
+#endif
+#ifndef SIS966_PCI_E_X_3
+ #define SIS966_PCI_E_X_3 4
+#endif
+
+#ifndef SIS966_USE_NIC
+ #define SIS966_USE_NIC 0
+#endif
+
+#ifndef SIS966_USE_AZA
+ #define SIS966_USE_AZA 0
+#endif
+
+#define SIS966_CHIP_REV 3
+
+static void sis966_early_set_port(unsigned sis966_num, unsigned *busn, unsigned *devn, unsigned *io_base)
+{
+
+ static const unsigned int ctrl_devport_conf[] = {
+ PCI_ADDR(0, 1, 1, ANACTRL_REG_POS), ~(0x0000ff00), ANACTRL_IO_BASE,
+ PCI_ADDR(0, 1, 1, SYSCTRL_REG_POS), ~(0x0000ff00), SYSCTRL_IO_BASE,
+ PCI_ADDR(0, 1, 1, ACPICTRL_REG_POS), ~(0x0000ff00), ACPICTRL_IO_BASE,
+ };
+
+ int j;
+ for(j = 0; j < sis966_num; j++ ) {
+ setup_resource_map_offset(ctrl_devport_conf,
+ sizeof(ctrl_devport_conf)/sizeof(ctrl_devport_conf[0]),
+ PCI_DEV(busn[j], devn[j], 0) , io_base[j]);
+ }
+}
+
+static void sis966_early_clear_port(unsigned sis966_num, unsigned *busn, unsigned *devn, unsigned *io_base)
+{
+
+ static const unsigned int ctrl_devport_conf_clear[] = {
+ PCI_ADDR(0, 1, 1, ANACTRL_REG_POS), ~(0x0000ff00), 0,
+ PCI_ADDR(0, 1, 1, SYSCTRL_REG_POS), ~(0x0000ff00), 0,
+ PCI_ADDR(0, 1, 1, ACPICTRL_REG_POS), ~(0x0000ff00), 0,
+ };
+
+ int j;
+ for(j = 0; j < sis966_num; j++ ) {
+ setup_resource_map_offset(ctrl_devport_conf_clear,
+ sizeof(ctrl_devport_conf_clear)/sizeof(ctrl_devport_conf_clear[0]),
+ PCI_DEV(busn[j], devn[j], 0) , io_base[j]);
+ }
+
+
+}
+static void delayx(uint8_t value) {
+#if 1
+ int i;
+ for(i=0;i<0x8000;i++) {
+ outb(value, 0x80);
+ }
+#endif
+}
+
+static void sis966_early_pcie_setup(unsigned busnx, unsigned devnx, unsigned anactrl_io_base, unsigned pci_e_x)
+{
+ uint32_t tgio_ctrl;
+ uint32_t pll_ctrl;
+ uint32_t dword;
+ int i;
+ device_t dev;
+ dev = PCI_DEV(busnx, devnx+1, 1);
+ dword = pci_read_config32(dev, 0xe4);
+ dword |= 0x3f0; // disable it at first
+ pci_write_config32(dev, 0xe4, dword);
+
+ for(i=0; i<3; i++) {
+ tgio_ctrl = inl(anactrl_io_base + 0xcc);
+ tgio_ctrl &= ~(3<<9);
+ tgio_ctrl |= (i<<9);
+ outl(tgio_ctrl, anactrl_io_base + 0xcc);
+ pll_ctrl = inl(anactrl_io_base + 0x30);
+ pll_ctrl |= (1<<31);
+ outl(pll_ctrl, anactrl_io_base + 0x30);
+ do {
+ pll_ctrl = inl(anactrl_io_base + 0x30);
+ } while (!(pll_ctrl & 1));
+ }
+ tgio_ctrl = inl(anactrl_io_base + 0xcc);
+ tgio_ctrl &= ~((7<<4)|(1<<8));
+ tgio_ctrl |= (pci_e_x<<4)|(1<<8);
+ outl(tgio_ctrl, anactrl_io_base + 0xcc);
+
+// wait 100us
+ delayx(1);
+
+ dword = pci_read_config32(dev, 0xe4);
+ dword &= ~(0x3f0); // enable
+ pci_write_config32(dev, 0xe4, dword);
+
+// need to wait 100ms
+ delayx(1000);
+}
+
+static void sis966_early_setup(unsigned sis966_num, unsigned *busn, unsigned *devn, unsigned *io_base, unsigned *pci_e_x)
+{
+
+ static const unsigned int ctrl_conf_1[] = {
+ RES_PORT_IO_32, ACPICTRL_IO_BASE + 0x10, 0x0007ffff, 0xff78000,
+ RES_PORT_IO_32, ACPICTRL_IO_BASE + 0xa4, 0xffedffff, 0x0012000,
+ RES_PORT_IO_32, ACPICTRL_IO_BASE + 0xac, 0xfffffdff, 0x0000200,
+ RES_PORT_IO_32, ACPICTRL_IO_BASE + 0xb4, 0xfffffffd, 0x0000002,
+
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x24, 0xc0f0f08f, 0x26020230,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x34, 0x00000000, 0x22222222,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x08, 0x7FFFFFFF, 0x00000000,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x2C, 0x7FFFFFFF, 0x80000000,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0xCC, 0xFFFFF9FF, 0x00000000,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x30, 0x8FFFFFFF, 0x40000000,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0xCC, 0xFFFFF9FF, 0x00000200,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x30, 0x8FFFFFFF, 0x40000000,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0xCC, 0xFFFFF9FF, 0x00000400,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x30, 0x8FFFFFFF, 0x40000000,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x74, 0xFFFF0FF5, 0x0000F000,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x78, 0xFF00FF00, 0x00100010,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x7C, 0xFF0FF0FF, 0x00500500,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x80, 0xFFFFFFE7, 0x00000000,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x60, 0xFFCFFFFF, 0x00300000,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x90, 0xFFFF00FF, 0x0000FF00,
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x9C, 0xFF00FFFF, 0x00070000,
+
+ RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x40), 0x00000000, 0xCB8410DE,
+ RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x48), 0xFFFFDCED, 0x00002002,
+ RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x78), 0xFFFFFF8E, 0x00000011,
+ RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x80), 0xFFFF0000, 0x00009923,
+ RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x88), 0xFFFFFFFE, 0x00000000,
+ RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x8C), 0xFFFF0000, 0x0000007F,
+ RES_PCI_IO, PCI_ADDR(0, 0, 0, 0xDC), 0xFFFEFFFF, 0x00010000,
+
+ RES_PCI_IO, PCI_ADDR(0, 1, 0, 0x40), 0x00000000, 0xCB8410DE,
+ RES_PCI_IO, PCI_ADDR(0, 1, 0, 0x74), 0xFFFFFF7B, 0x00000084,
+ RES_PCI_IO, PCI_ADDR(0, 1, 0, 0xF8), 0xFFFFFFCF, 0x00000010,
+
+ RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xC4), 0xFFFFFFFE, 0x00000001,
+ RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xF0), 0x7FFFFFFD, 0x00000002,
+ RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xF8), 0xFFFFFFCF, 0x00000010,
+
+ RES_PCI_IO, PCI_ADDR(0, 8, 0, 0x40), 0x00000000, 0xCB8410DE,
+ RES_PCI_IO, PCI_ADDR(0, 8, 0, 0x68), 0xFFFFFF00, 0x000000FF,
+ RES_PCI_IO, PCI_ADDR(0, 8, 0, 0xF8), 0xFFFFFFBF, 0x00000040,//Enable bridge mode
+
+ RES_PCI_IO, PCI_ADDR(0, 9, 0, 0x40), 0x00000000, 0xCB8410DE,
+ RES_PCI_IO, PCI_ADDR(0, 9, 0, 0x68), 0xFFFFFF00, 0x000000FF,
+ RES_PCI_IO, PCI_ADDR(0, 9, 0, 0xF8), 0xFFFFFFBF, 0x00000040,//Enable bridge mode
+ };
+
+ static const unsigned int ctrl_conf_1_1[] = {
+ RES_PCI_IO, PCI_ADDR(0, 5, 0, 0x40), 0x00000000, 0xCB8410DE,
+ RES_PCI_IO, PCI_ADDR(0, 5, 0, 0x50), 0xFFFFFFFC, 0x00000003,
+ RES_PCI_IO, PCI_ADDR(0, 5, 0, 0x64), 0xFFFFFFFE, 0x00000001,
+ RES_PCI_IO, PCI_ADDR(0, 5, 0, 0x70), 0xFFF0FFFF, 0x00040000,
+ RES_PCI_IO, PCI_ADDR(0, 5, 0, 0xAC), 0xFFFFF0FF, 0x00000100,
+ RES_PCI_IO, PCI_ADDR(0, 5, 0, 0x7C), 0xFFFFFFEF, 0x00000000,
+ RES_PCI_IO, PCI_ADDR(0, 5, 0, 0xC8), 0xFF00FF00, 0x000A000A,
+ RES_PCI_IO, PCI_ADDR(0, 5, 0, 0xD0), 0xF0FFFFFF, 0x03000000,
+ RES_PCI_IO, PCI_ADDR(0, 5, 0, 0xE0), 0xF0FFFFFF, 0x03000000,
+ };
+
+
+ static const unsigned int ctrl_conf_sis966_only[] = {
+ RES_PCI_IO, PCI_ADDR(0, 1, 1, 0x40), 0x00000000, 0xCB8410DE,
+ RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xE0), 0xFFFFFEFF, 0x00000000,
+ RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xE4), 0xFFFFFFFB, 0x00000000,
+ RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xE8), 0xFFA9C8FF, 0x00003000,
+
+// RES_PCI_IO, PCI_ADDR(0, 4, 0, 0x40), 0x00000000, 0xCB8410DE,
+// RES_PCI_IO, PCI_ADDR(0, 4, 0, 0xF8), 0xFFFFFFCF, 0x00000010,
+
+ RES_PCI_IO, PCI_ADDR(0, 2, 0, 0x40), 0x00000000, 0xCB8410DE,
+
+ RES_PCI_IO, PCI_ADDR(0, 2, 1, 0x40), 0x00000000, 0xCB8410DE,
+ RES_PCI_IO, PCI_ADDR(0, 2, 1, 0x64), 0xF87FFFFF, 0x05000000,
+ RES_PCI_IO, PCI_ADDR(0, 2, 1, 0x78), 0xFFC07FFF, 0x00360000,
+ RES_PCI_IO, PCI_ADDR(0, 2, 1, 0x68), 0xFE00D03F, 0x013F2C00,
+ RES_PCI_IO, PCI_ADDR(0, 2, 1, 0x70), 0xFFF7FFFF, 0x00080000,
+ RES_PCI_IO, PCI_ADDR(0, 2, 1, 0x7C), 0xFFFFF00F, 0x00000570,
+ RES_PCI_IO, PCI_ADDR(0, 2, 1, 0xF8), 0xFFFFFFCF, 0x00000010,
+
+ RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x04), 0xFFFFFEFB, 0x00000104,
+ RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x3C), 0xF5FFFFFF, 0x0A000000,
+ RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x40), 0x00C8FFFF, 0x07330000,
+ RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x48), 0xFFFFFFF8, 0x00000005,
+ RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x4C), 0xFE02FFFF, 0x004C0000,
+ RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x74), 0xFFFFFFC0, 0x00000000,
+ RES_PCI_IO, PCI_ADDR(0, 6, 0, 0xC0), 0x00000000, 0xCB8410DE,
+ RES_PCI_IO, PCI_ADDR(0, 6, 0, 0xC4), 0xFFFFFFF8, 0x00000007,
+
+#if SIS966_USE_AZA == 1
+ RES_PCI_IO, PCI_ADDR(0, 6, 1, 0x40), 0x00000000, 0xCB8410DE,
+
+// RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xE4), ~(1<<14), 1<<14,
+#endif
+// play a while with GPIO in SIS966
+#ifdef SIS966_MB_SETUP
+ SIS966_MB_SETUP
+#endif
+
+#if SIS966_USE_AZA == 1
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 21, ~(3<<2), (2<<2),
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 22, ~(3<<2), (2<<2),
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 46, ~(3<<2), (2<<2),
+#endif
+
+
+ };
+
+ static const unsigned int ctrl_conf_master_only[] = {
+
+ RES_PORT_IO_32, ACPICTRL_IO_BASE + 0x80, 0xEFFFFFF, 0x01000000,
+
+ RES_PCI_IO, PCI_ADDR(0, 1, 0, 0x78), 0xC0FFFFFF, 0x19000000,
+
+ //Master SIS966 ????YHLU
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 0, ~(3<<2), (0<<2),
+
+ };
+
+ static const unsigned int ctrl_conf_2[] = {
+ /* I didn't put pcie related stuff here */
+
+ RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x74), 0xFFFFF00F, 0x000009D0,
+ RES_PCI_IO, PCI_ADDR(0, 1, 0, 0x74), 0xFFFF7FFF, 0x00008000,
+
+ RES_PORT_IO_32, SYSCTRL_IO_BASE + 0x48, 0xFFFEFFFF, 0x00010000,
+
+ RES_PORT_IO_32, ANACTRL_IO_BASE + 0x60, 0xFFFFFF00, 0x00000012,
+
+
+#if SIS966_USE_NIC == 1
+ RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xe4), ~((1<<22)|(1<<20)), (1<<22)|(1<<20),
+
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 4, ~(0xff), ((0<<4)|(1<<2)|(0<<0)),
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 4, ~(0xff), ((0<<4)|(1<<2)|(1<<0)),
+#endif
+
+ };
+
+
+ int j, i;
+
+ for(j=0; j<sis966_num; j++) {
+ sis966_early_pcie_setup(busn[j], devn[j], io_base[j] + ANACTRL_IO_BASE, pci_e_x[j]);
+
+ setup_resource_map_x_offset(ctrl_conf_1, sizeof(ctrl_conf_1)/sizeof(ctrl_conf_1[0]),
+ PCI_DEV(busn[j], devn[j], 0), io_base[j]);
+ for(i=0; i<3; i++) { // three SATA
+ setup_resource_map_x_offset(ctrl_conf_1_1, sizeof(ctrl_conf_1_1)/sizeof(ctrl_conf_1_1[0]),
+ PCI_DEV(busn[j], devn[j], i), io_base[j]);
+ }
+ if(busn[j] == 0) {
+ setup_resource_map_x_offset(ctrl_conf_sis966_only, sizeof(ctrl_conf_sis966_only)/sizeof(ctrl_conf_sis966_only[0]),
+ PCI_DEV(busn[j], devn[j], 0), io_base[j]);
+ }
+
+ if( (busn[j] == 0) && (sis966_num>1) ) {
+ setup_resource_map_x_offset(ctrl_conf_master_only, sizeof(ctrl_conf_master_only)/sizeof(ctrl_conf_master_only[0]),
+ PCI_DEV(busn[j], devn[j], 0), io_base[j]);
+ }
+
+ setup_resource_map_x_offset(ctrl_conf_2, sizeof(ctrl_conf_2)/sizeof(ctrl_conf_2[0]),
+ PCI_DEV(busn[j], devn[j], 0), io_base[j]);
+
+ }
+
+#if 0
+ for(j=0; j< sis966_num; j++) {
+ // PCI-E (XSPLL) SS table 0x40, x044, 0x48
+ // SATA (SPPLL) SS table 0xb0, 0xb4, 0xb8
+ // CPU (PPLL) SS table 0xc0, 0xc4, 0xc8
+ setup_ss_table(io_base[j] + ANACTRL_IO_BASE+0x40, io_base[j] + ANACTRL_IO_BASE+0x44,
+ io_base[j] + ANACTRL_IO_BASE+0x48, pcie_ss_tbl, 64);
+ setup_ss_table(io_base[j] + ANACTRL_IO_BASE+0xb0, io_base[j] + ANACTRL_IO_BASE+0xb4,
+ io_base[j] + ANACTRL_IO_BASE+0xb8, sata_ss_tbl, 64);
+ setup_ss_table(io_base[j] + ANACTRL_IO_BASE+0xc0, io_base[j] + ANACTRL_IO_BASE+0xc4,
+ io_base[j] + ANACTRL_IO_BASE+0xc8, cpu_ss_tbl, 64);
+ }
+#endif
+
+}
+
+#ifndef HT_CHAIN_NUM_MAX
+
+#define HT_CHAIN_NUM_MAX 4
+#define HT_CHAIN_BUSN_D 0x40
+#define HT_CHAIN_IOBASE_D 0x4000
+
+#endif
+
+static int sis966_early_setup_x(void)
+{
+ /*find out how many sis966 we have */
+ unsigned busn[HT_CHAIN_NUM_MAX];
+ unsigned devn[HT_CHAIN_NUM_MAX];
+ unsigned io_base[HT_CHAIN_NUM_MAX];
+ /*
+ FIXME: May have problem if there is different SIS966 HTX card with different PCI_E lane allocation
+ Need to use same trick about pci1234 to verify node/link connection
+ */
+ unsigned pci_e_x[HT_CHAIN_NUM_MAX] = {SIS966_PCI_E_X_0, SIS966_PCI_E_X_1, SIS966_PCI_E_X_2, SIS966_PCI_E_X_3 };
+ int sis966_num = 0;
+ unsigned busnx;
+ unsigned devnx;
+ int ht_c_index,j;
+
+ /* FIXME: multi pci segment handling */
+
+ /* Any system that only have IO55 without SIS966? */
+ for(ht_c_index = 0; ht_c_index<HT_CHAIN_NUM_MAX; ht_c_index++) {
+ busnx = ht_c_index * HT_CHAIN_BUSN_D;
+ for(devnx=0;devnx<0x20;devnx++) {
+ uint32_t id;
+ device_t dev;
+ dev = PCI_DEV(busnx, devnx, 0);
+ id = pci_read_config32(dev, PCI_VENDOR_ID);
+ if(id == 0x036910de) {
+ busn[sis966_num] = busnx;
+ devn[sis966_num] = devnx;
+ io_base[sis966_num] = ht_c_index * HT_CHAIN_IOBASE_D; // we may have ht chain other than SIS966
+ sis966_num++;
+ if(sis966_num == SIS966_NUM) goto out;
+ break; // only one SIS966 on one chain
+ }
+ }
+ }
+
+out:
+ print_debug("sis966_num:"); print_debug_hex8(sis966_num); print_debug("\r\n");
+
+ //sis966_early_set_port(sis966_num, busn, devn, io_base);
+ //sis966_early_setup(sis966_num, busn, devn, io_base, pci_e_x);
+
+ //sis966_early_clear_port(sis966_num, busn, devn, io_base);
+
+// set_ht_link_sis966(HT_CHAIN_NUM_MAX);
+
+ return 0;
+
+}
+
+
+
diff --git a/src/southbridge/sis/sis966/sis966_early_setup_ss.h b/src/southbridge/sis/sis966/sis966_early_setup_ss.h
new file mode 100644
index 0000000000..77e8a5fb1c
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_early_setup_ss.h
@@ -0,0 +1,222 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+static const unsigned int pcie_ss_tbl[] = {
+ 0x0C504103f,
+ 0x0C504103f,
+ 0x0C504103f,
+ 0x0C5042040,
+ 0x0C5042040,
+ 0x0C5042040,
+ 0x0C5043041,
+ 0x0C5043041,
+ 0x0C5043041,
+ 0x0C5043041,
+ 0x0C5044042,
+ 0x0C5044042,
+ 0x0C5044042,
+ 0x0C5045043,
+ 0x0C5045043,
+ 0x0C5045043,
+ 0x0C5045043,
+ 0x0C5045043,
+ 0x0C5046044,
+ 0x0C5046044,
+ 0x0C5046044,
+ 0x0C5046044,
+ 0x0C5047045,
+ 0x0C5047045,
+ 0x0C5047045,
+ 0x0C5047045,
+ 0x0C5047045,
+ 0x0C5048046,
+ 0x0C5048046,
+ 0x0C5048046,
+ 0x0C5048046,
+ 0x0C5049047,
+ 0x0C5049047,
+ 0x0C5049047,
+ 0x0C504a048,
+ 0x0C504a048,
+ 0x0C504b049,
+ 0x0C504b049,
+ 0x0C504a048,
+ 0x0C504a048,
+ 0x0C5049047,
+ 0x0C5049047,
+ 0x0C5048046,
+ 0x0C5048046,
+ 0x0C5048046,
+ 0x0C5047045,
+ 0x0C5047045,
+ 0x0C5047045,
+ 0x0C5047045,
+ 0x0C5047045,
+ 0x0C5046044,
+ 0x0C5046044,
+ 0x0C5046044,
+ 0x0C5046044,
+ 0x0C5045043,
+ 0x0C5045043,
+ 0x0C5045043,
+ 0x0C5044042,
+ 0x0C5044042,
+ 0x0C5044042,
+ 0x0C5043041,
+ 0x0C5043041,
+ 0x0C5042040,
+ 0x0C5042040,
+};
+static const unsigned int sata_ss_tbl[] = {
+ 0x0c9044042,
+ 0x0c9044042,
+ 0x0c9044042,
+ 0x0c9045043,
+ 0x0c9045043,
+ 0x0c9045043,
+ 0x0c9045043,
+ 0x0c9045043,
+ 0x0c9046044,
+ 0x0c9046044,
+ 0x0c9046044,
+ 0x0c9046044,
+ 0x0c9047045,
+ 0x0c9047045,
+ 0x0c9047045,
+ 0x0c9047045,
+ 0x0c9047045,
+ 0x0c9048046,
+ 0x0c9048046,
+ 0x0c9048046,
+ 0x0c9048046,
+ 0x0c9049047,
+ 0x0c9049047,
+ 0x0c9049047,
+ 0x0c9049047,
+ 0x0c904a048,
+ 0x0c904a048,
+ 0x0c904a048,
+ 0x0c904a048,
+ 0x0c904b049,
+ 0x0c904b049,
+ 0x0c904b049,
+ 0x0c904b049,
+ 0x0c904b049,
+ 0x0c904b049,
+ 0x0c904a048,
+ 0x0c904a048,
+ 0x0c904a048,
+ 0x0c904a048,
+ 0x0c9049047,
+ 0x0c9049047,
+ 0x0c9049047,
+ 0x0c9049047,
+ 0x0c9048046,
+ 0x0c9048046,
+ 0x0c9048046,
+ 0x0c9048046,
+ 0x0c9047045,
+ 0x0c9047045,
+ 0x0c9047045,
+ 0x0c9047045,
+ 0x0c9047045,
+ 0x0c9046044,
+ 0x0c9046044,
+ 0x0c9046044,
+ 0x0c9046044,
+ 0x0c9045043,
+ 0x0c9045043,
+ 0x0c9045043,
+ 0x0c9045043,
+ 0x0c9045043,
+ 0x0c9044042,
+ 0x0c9044042,
+ 0x0c9044042,
+};
+
+static const unsigned int cpu_ss_tbl[] = {
+ 0x0C5038036,
+ 0x0C5038036,
+ 0x0C5038036,
+ 0x0C5037035,
+ 0x0C5037035,
+ 0x0C5037035,
+ 0x0C5037035,
+ 0x0C5036034,
+ 0x0C5036034,
+ 0x0C5036034,
+ 0x0C5036034,
+ 0x0C5036034,
+ 0x0C5035033,
+ 0x0C5035033,
+ 0x0C5035033,
+ 0x0C5035033,
+ 0x0C5035033,
+ 0x0C5035033,
+ 0x0C5034032,
+ 0x0C5034032,
+ 0x0C5034032,
+ 0x0C5034032,
+ 0x0C5034032,
+ 0x0C5034032,
+ 0x0C5035033,
+ 0x0C5035033,
+ 0x0C5035033,
+ 0x0C5035033,
+ 0x0C5035033,
+ 0x0C5036034,
+ 0x0C5036034,
+ 0x0C5036034,
+ 0x0C5036034,
+ 0x0C5036034,
+ 0x0C5037035,
+ 0x0C5037035,
+ 0x0C5037035,
+ 0x0C5037035,
+ 0x0C5038036,
+ 0x0C5038036,
+ 0x0C5038036,
+ 0x0C5038036,
+ 0x0C5039037,
+ 0x0C5039037,
+ 0x0C5039037,
+ 0x0C5039037,
+ 0x0C503a038,
+ 0x0C503a038,
+ 0x0C503a038,
+ 0x0C503a038,
+ 0x0C503b039,
+ 0x0C503b039,
+ 0x0C503b039,
+ 0x0C503b039,
+ 0x0C503b039,
+ 0x0C503a038,
+ 0x0C503a038,
+ 0x0C503a038,
+ 0x0C503a038,
+ 0x0C503a038,
+ 0x0C5039037,
+ 0x0C5039037,
+ 0x0C5039037,
+ 0x0C5039037,
+};
+
+
diff --git a/src/southbridge/sis/sis966/sis966_early_smbus.c b/src/southbridge/sis/sis966/sis966_early_smbus.c
new file mode 100644
index 0000000000..6244025941
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_early_smbus.c
@@ -0,0 +1,904 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "sis966_smbus.h"
+
+#define SMBUS0_IO_BASE 0x8D0
+
+uint8_t SiS_LPC_init[33][3]={
+{0x04, 0xF8, 0x07}, //Reg 0x04
+{0x45, 0x00, 0x00}, //Reg 0x45 //Enable Rom Flash
+{0x46, 0x00, 0x3D}, //Reg 0x46
+{0x47, 0x00, 0xDD}, //Reg 0x47
+{0x48, 0x00, 0x12}, //Reg 0x48
+{0x64, 0x00, 0xFF}, //Reg 0x64
+{0x65, 0x00, 0xC1}, //Reg 0x65
+{0x68, 0x00, 0x89}, //Reg 0x68 //SB.ASM, START POST
+{0x69, 0x00, 0x80}, //Reg 0x69
+{0x6B, 0x00, 0x00}, //Reg 0x6B //SBBB.ASM
+{0x6C, 0xFF, 0x97}, //Reg 0x6C //SBBB.ASM
+{0x6E, 0x00, 0x00}, //Reg 0x6E //SBBB.ASM But in Early Post sets 0x04.
+{0x6F, 0xFF, 0x14}, //Reg 0x6F //SBBB.ASM
+{0x77, 0x00, 0x0E}, //Reg 0x77 //SBOEM.ASM, EARLY POST
+{0x78, 0x00, 0x20}, //Reg 0x78
+{0x7B, 0x00, 0x88}, //Reg 0x7B
+{0x7F, 0x00, 0x40}, //Reg 0x7F //SBOEM.ASM, EARLY POST
+{0xC1, 0x00, 0xF0}, //Reg 0xC1
+{0xC2, 0x00, 0x01}, //Reg 0xC2
+{0xC3, 0x00, 0x00}, //Reg 0xC3 //NBAGPBB.ASM
+{0xC9, 0x00, 0x80}, //Reg 0xC9
+{0xCF, 0x00, 0x45}, //Reg 0xCF
+{0xD0, 0x00, 0x02}, //Reg 0xD0
+{0xD4, 0x00, 0x44}, //Reg 0xD4
+{0xD5, 0x00, 0x62}, //Reg 0xD5
+{0xD6, 0x00, 0x32}, //Reg 0xD6
+{0xD8, 0x00, 0x45}, //Reg 0xD8
+{0xDA, 0x00, 0xDA}, //Reg 0xDA
+{0xDB, 0x00, 0x61}, //Reg 0xDB
+{0xDC, 0x00, 0xAA}, //Reg 0xDC
+{0xDD, 0x00, 0xAA}, //Reg 0xDD
+{0xDE, 0x00, 0xAA}, //Reg 0xDE
+{0xDF, 0x00, 0xAA}, //Reg 0xDF
+{0x00, 0x00, 0x00} //End of table
+};
+uint8_t SiS_NBPCIE_init[43][3]={
+{0x3D, 0x00, 0x00}, //Reg 0x3D
+{0x1C, 0xFE, 0x01}, //Reg 0x1C
+{0x1D, 0xFE, 0x01}, //Reg 0x1D
+{0x24, 0xFE, 0x01}, //Reg 0x24
+{0x26, 0xFE, 0x01}, //Reg 0x26
+{0x40, 0xFF, 0x10}, //Reg 0x40
+{0x43, 0xFF, 0x78}, //Reg 0x43
+{0x44, 0xFF, 0x02}, //Reg 0x44
+{0x45, 0xFF, 0x10}, //Reg 0x45
+{0x48, 0xFF, 0x52}, //Reg 0x48
+{0x49, 0xFF, 0xE3}, //Reg 0x49
+{0x5A, 0x00, 0x00}, //Reg 0x4A
+{0x4B, 0x00, 0x16}, //Reg 0x4B
+{0x4C, 0x00, 0x80}, //Reg 0x4C
+{0x4D, 0x00, 0x02}, //Reg 0x4D
+{0x4E, 0x00, 0x00}, //Reg 0x4E
+{0x5C, 0x00, 0x52}, //Reg 0x5C
+{0x5E, 0x00, 0x10}, //Reg 0x5E
+{0x34, 0x00, 0xD0}, //Reg 0x34
+{0xD0, 0x00, 0x01}, //Reg 0xD0
+
+{0x4F, 0x00, 0x80}, //Reg 0x4F
+{0xA1, 0x00, 0xF4}, //Reg 0xA1
+{0xA2, 0x7F, 0x00}, //Reg 0xA2
+{0xBD, 0x00, 0xA0}, //Reg 0xBD
+{0xD1, 0xFF, 0x00}, //Reg 0xD1
+{0xD3, 0xFE, 0x01}, //Reg 0xD3
+{0xD4, 0x18, 0x20}, //Reg 0xD4
+{0xD5, 0xF0, 0x00}, //Reg 0xD5
+{0xDD, 0xFF, 0x00}, //Reg 0xDD
+{0xDE, 0xEC, 0x10}, //Reg 0xDE
+{0xDF, 0xFF, 0x00}, //Reg 0xDF
+{0xE0, 0xF7, 0x00}, //Reg 0xE0
+{0xE3, 0xEF, 0x10}, //Reg 0xE3
+{0xE4, 0x7F, 0x80}, //Reg 0xE4
+{0xE5, 0xFF, 0x00}, //Reg 0xE5
+{0xE6, 0x06, 0x00}, //Reg 0xE6
+{0xE7, 0xFF, 0x00}, //Reg 0xE7
+{0xF5, 0x00, 0x00}, //Reg 0xF5
+{0xF6, 0x3F, 0x00}, //Reg 0xF6
+{0xF7, 0xFF, 0x00}, //Reg 0xF7
+{0xFD, 0xFF, 0x00}, //Reg 0xFD
+{0x4F, 0x00, 0x00}, //Reg 0x4F
+{0x00, 0x00, 0x00} //End of table
+};
+uint8_t SiS_ACPI_init[10][3]={
+{0x1B, 0xBF, 0x40}, //Reg 0x1B
+{0x84, 0x00, 0x0E}, //Reg 0x84
+{0x85, 0x00, 0x29}, //Reg 0x85
+{0x86, 0x00, 0xCB}, //Reg 0x86
+{0x87, 0x00, 0x55}, //Reg 0x87
+{0x6B, 0x00, 0x00}, //Reg 0x6B
+{0x6C, 0x68, 0x97}, //Reg 0x6C
+{0x6E, 0x00, 0x00}, //Reg 0x6E
+{0x6F, 0xFF, 0x14}, //Reg 0x6F
+{0x00, 0x00, 0x00} //End of table
+};
+uint8_t SiS_SBPCIE_init[13][3]={
+{0x48, 0x00 ,0x07}, //Reg 0x48
+{0x49, 0x00 ,0x06}, //Reg 0x49
+{0x4A, 0x00 ,0x0C}, //Reg 0x4A
+{0x4B, 0x00 ,0x00}, //Reg 0x4B
+{0x4E, 0x00 ,0x20}, //Reg 0x4E
+{0x1C, 0x00 ,0xF1}, //Reg 0x1C
+{0x1D, 0x00 ,0x01}, //Reg 0x1D
+{0x24, 0x00 ,0x01}, //Reg 0x24
+{0x26, 0x00 ,0x01}, //Reg 0x26
+{0xF6, 0x00 ,0x02}, //Reg 0xF6
+{0xF7, 0x00 ,0xC8}, //Reg 0xF7
+{0x5B, 0x00 ,0x40}, //Reg 0x5B
+{0x00, 0x00, 0x00} //End of table
+};
+
+
+#if 1
+uint8_t SiS_NB_init[56][3]={
+{0x04, 0x00 ,0x07}, //Reg 0x04
+{0x05, 0x00 ,0x00}, //Reg 0x05 // alex
+{0x0D, 0x00 ,0x20}, //Reg 0x0D
+{0x2C, 0x00 ,0x39}, //Reg 0x2C
+{0x2D, 0x00 ,0x10}, //Reg 0x2D
+{0x2E, 0x00 ,0x61}, //Reg 0x2E
+{0x2F, 0x00 ,0x07}, //Reg 0x2F
+{0x34, 0x00 ,0xA0}, //Reg 0x34
+{0x40, 0x00 ,0x36}, //Reg 0x40
+{0x42, 0x00 ,0xB9}, //Reg 0x42
+{0x43, 0x00 ,0x8B}, //Reg 0x43
+{0x44, 0x00 ,0x05}, //Reg 0x44
+{0x45, 0x00 ,0xFF}, //Reg 0x45
+{0x46, 0x00 ,0x90}, //Reg 0x46
+{0x47, 0x00 ,0xA0}, //Reg 0x47
+//{0x4C, 0xFF ,0x09}, //Reg 0x4C // SiS307 enable
+{0x4E, 0x00 ,0x00}, //Reg 0x4E
+{0x4F, 0x00 ,0x02}, //Reg 0x4F
+{0x5B, 0x00 ,0x44}, //Reg 0x5B
+{0x5D, 0x00 ,0x00}, //Reg 0x5D
+{0x5E, 0x00 ,0x25}, //Reg 0x5E
+{0x61, 0x00 ,0xB0}, //Reg 0x61
+{0x65, 0x00 ,0xB0}, //Reg 0x65
+{0x68, 0x00 ,0x4C}, //Reg 0x68
+{0x69, 0x00 ,0xD0}, //Reg 0x69
+{0x6B, 0x00 ,0x07}, //Reg 0x6B
+{0x6C, 0x00 ,0xDD}, //Reg 0x6C
+{0x6D, 0x00 ,0xAD}, //Reg 0x6D
+{0x6E, 0x00 ,0xE8}, //Reg 0x6E
+{0x6F, 0x00 ,0x4D}, //Reg 0x6F
+{0x70, 0x00 ,0x00}, //Reg 0x70
+{0x71, 0x00 ,0x80}, //Reg 0x71
+{0x72, 0x00 ,0x00}, //Reg 0x72
+{0x73, 0x00 ,0x00}, //Reg 0x73
+{0x74, 0x00 ,0x01}, //Reg 0x74
+{0x75, 0x00 ,0x10}, //Reg 0x75
+{0x7E, 0x00 ,0x29}, //Reg 0x7E
+{0x8B, 0x00 ,0x10}, //Reg 0x8B
+{0x8D, 0x00 ,0x03}, //Reg 0x8D
+{0xA1, 0x00 ,0xD0}, //Reg 0xA1
+{0xA2, 0x00 ,0x30}, //Reg 0xA2
+{0xA4, 0x00 ,0x0B}, //Reg 0xA4
+{0xA9, 0x00 ,0x02}, //Reg 0xA9
+{0xB0, 0x00 ,0x30}, //Reg 0xB0
+{0xB4, 0x00 ,0x30}, //Reg 0xB4
+{0x90, 0x00 ,0x00}, //Reg 0x90
+{0x91, 0x00 ,0x00}, //Reg 0x91
+{0x92, 0x00 ,0x00}, //Reg 0x92
+{0x93, 0x00 ,0x00}, //Reg 0x93
+{0x94, 0x00 ,0x00}, //Reg 0x94
+{0x95, 0x00 ,0x00}, //Reg 0x95
+{0x96, 0x00 ,0x00}, //Reg 0x96
+{0x97, 0x00 ,0x00}, //Reg 0x97
+{0x98, 0x00 ,0x00}, //Reg 0x98
+{0x99, 0x00 ,0x00}, //Reg 0x99
+// alex
+//{0xD7, 0x00 ,0x00}, //Reg 0x99
+//{0xDD, 0x00 ,0x02}, //Reg 0x99
+//
+//{0x13, 0x00 ,0xF0}, //Reg 0x99
+
+{0x00, 0x00, 0x00} //End of table
+};
+
+#else
+uint8_t SiS_NB_init[61][3]={
+{0x04, 0x00 ,0x07}, //Reg 0x04
+{0x05, 0x00 ,0x00}, //Reg 0x05 // alex
+{0x0D, 0x00 ,0x20}, //Reg 0x0D
+{0x2C, 0x00 ,0x39}, //Reg 0x2C
+{0x2D, 0x00 ,0x10}, //Reg 0x2D
+{0x2E, 0x00 ,0x61}, //Reg 0x2E
+{0x2F, 0x00 ,0x07}, //Reg 0x2F
+{0x34, 0x00 ,0xA0}, //Reg 0x34
+{0x40, 0x00 ,0x36}, //Reg 0x40
+{0x42, 0x00 ,0xB9}, //Reg 0x42
+{0x43, 0x00 ,0x8B}, //Reg 0x43
+{0x44, 0x00 ,0x05}, //Reg 0x44
+{0x45, 0x00 ,0xFF}, //Reg 0x45
+{0x46, 0x00 ,0x90}, //Reg 0x46
+{0x47, 0x00 ,0xA0}, //Reg 0x47
+{0x4C, 0xFF ,0x50}, //Reg 0x4C // SiS307 enable
+{0x4E, 0x00 ,0x00}, //Reg 0x4E
+{0x4F, 0x00 ,0x02}, //Reg 0x4F
+{0x5B, 0x00 ,0x44}, //Reg 0x5B
+{0x5D, 0x00 ,0x00}, //Reg 0x5D
+{0x5E, 0x00 ,0x25}, //Reg 0x5E
+{0x61, 0x00 ,0xB0}, //Reg 0x61
+{0x65, 0x00 ,0xB0}, //Reg 0x65
+{0x68, 0x00 ,0x4C}, //Reg 0x68
+{0x69, 0x00 ,0xD0}, //Reg 0x69
+{0x6B, 0x00 ,0x07}, //Reg 0x6B
+{0x6C, 0x00 ,0xDD}, //Reg 0x6C
+{0x6D, 0x00 ,0xAD}, //Reg 0x6D
+{0x6E, 0x00 ,0xE8}, //Reg 0x6E
+{0x6F, 0x00 ,0x4D}, //Reg 0x6F
+{0x70, 0x00 ,0x00}, //Reg 0x70
+{0x71, 0x00 ,0x80}, //Reg 0x71
+{0x72, 0x00 ,0x00}, //Reg 0x72
+{0x73, 0x00 ,0x00}, //Reg 0x73
+{0x74, 0x00 ,0x01}, //Reg 0x74
+{0x75, 0x00 ,0x10}, //Reg 0x75
+{0x7E, 0x00 ,0x29}, //Reg 0x7E
+{0x8B, 0x00 ,0x10}, //Reg 0x8B
+{0x8D, 0x00 ,0x03}, //Reg 0x8D
+{0xA1, 0x00 ,0xD0}, //Reg 0xA1
+{0xA2, 0x00 ,0x30}, //Reg 0xA2
+{0xA4, 0x00 ,0x0B}, //Reg 0xA4
+{0xA9, 0x00 ,0x02}, //Reg 0xA9
+{0xB0, 0x00 ,0x30}, //Reg 0xB0
+{0xB4, 0x00 ,0x30}, //Reg 0xB4
+{0x90, 0x00 ,0x00}, //Reg 0x90
+{0x91, 0x00 ,0x00}, //Reg 0x91
+{0x92, 0x00 ,0x00}, //Reg 0x92
+{0x93, 0x00 ,0x00}, //Reg 0x93
+{0x94, 0x00 ,0x00}, //Reg 0x94
+{0x95, 0x00 ,0x00}, //Reg 0x95
+{0x96, 0x00 ,0x00}, //Reg 0x96
+{0x97, 0x00 ,0x00}, //Reg 0x97
+{0x98, 0x00 ,0x00}, //Reg 0x98
+{0x99, 0x00 ,0x00}, //Reg 0x99
+// alex
+{0x86, 0x00 ,0x14}, //Reg 0x99
+{0x87, 0x00 ,0xC8}, //Reg 0x99
+{0xF4, 0x00 ,0x01},
+//
+{0x13, 0x00 ,0xF0}, //Reg 0x99
+
+{0x00, 0x00, 0x00} //End of table
+};
+
+
+#endif
+#if 1
+uint8_t SiS_NBAGP_init[34][3]={
+{0xCF, 0xDF, 0x00}, //HT issue
+{0x06, 0xDF, 0x20},
+{0x1E, 0xDF, 0x20},
+{0x50, 0x00, 0x02},
+{0x51, 0x00, 0x00},
+{0x54, 0x00, 0x09},
+{0x55, 0x00, 0x00},
+{0x56, 0x00, 0x80},
+{0x58, 0x00, 0x08},
+{0x60, 0x00, 0xB1},
+{0x61, 0x00, 0x02},
+{0x62, 0x00, 0x60},
+{0x63, 0x00, 0x60},
+{0x64, 0x00, 0xAA},
+{0x65, 0x00, 0x18},
+{0x68, 0x00, 0x23},
+{0x69, 0x00, 0x23},
+{0x6A, 0x00, 0xC8},
+{0x6B, 0x00, 0x08},
+{0x6C, 0x00, 0x00},
+{0x6D, 0x00, 0x00},
+{0x6E, 0x00, 0x08},
+{0x6F, 0x00, 0x00},
+{0xBB, 0x00, 0x00},
+{0xB5, 0x00, 0x30},
+{0xB0, 0x00, 0xDB},
+{0xB6, 0x00, 0x73},
+{0xB7, 0x00, 0x50},
+{0xBA, 0xBF, 0x41},
+{0xB4, 0x3F, 0xC0},
+{0xBF, 0xF9, 0x06},
+{0xBA, 0x00, 0x61},
+{0xBD, 0x7F, 0x80},
+
+
+{0x00, 0x00, 0x00} //End of table
+};
+
+
+
+#else
+
+//uint8_t SiS_NBAGP_init[53][3]={
+uint8_t SiS_NBAGP_init[40][3]={
+{0x04, 0x00 ,0x07}, //Reg 0x04
+{0x05, 0x00 ,0x01}, //Reg 0x05 // alex
+
+{0xCF, 0xDF, 0x00}, //HT issue
+{0x06, 0xDF, 0x20},
+{0x1E, 0xDF, 0x20},
+{0x50, 0x00, 0x02},
+{0x51, 0x00, 0x00},
+{0x54, 0x00, 0x09},
+{0x55, 0x00, 0x00},
+{0x56, 0x00, 0x80},
+{0x58, 0x00, 0x08},
+{0x60, 0x00, 0xB1},
+{0x61, 0x00, 0x02},
+{0x62, 0x00, 0x60},
+{0x63, 0x00, 0x60},
+{0x64, 0x00, 0xAA},
+{0x65, 0x00, 0x18},
+{0x68, 0x00, 0x23},
+{0x69, 0x00, 0x23},
+{0x6A, 0x00, 0xC8},
+{0x6B, 0x00, 0x08},
+{0x6C, 0x00, 0x00},
+{0x6D, 0x00, 0x00},
+{0x6E, 0x00, 0x08},
+{0x6F, 0x00, 0x00},
+{0xBB, 0x00, 0x00},
+{0xB5, 0x00, 0x30},
+{0xB0, 0x00, 0xDB},
+{0xB6, 0x00, 0x73},
+{0xB7, 0x00, 0x50},
+{0xBA, 0xBF, 0x41},
+{0xB4, 0x3F, 0xC0},
+{0xBF, 0xF9, 0x06},
+{0xBA, 0x00, 0x61},
+{0xBD, 0x7F, 0x80},
+
+
+
+{0x0D, 0x00 ,0x40}, //Reg 0x05 // alex
+/*
+{0x19, 0x00 ,0x01}, //Reg 0x05 // alex
+{0x1A, 0x00 ,0x01}, //Reg 0x05 // alex
+{0x1B, 0x00 ,0x40}, //Reg 0x05 // alex
+{0x1C, 0x00 ,0xE0}, //Reg 0x05 // alex
+{0x1D, 0x00 ,0xE0}, //Reg 0x05 // alex
+{0x20, 0x00 ,0xB0}, //Reg 0x05 // alex
+{0x21, 0x00 ,0xFE}, //Reg 0x05 // alex
+{0x22, 0x00 ,0xB0}, //Reg 0x05 // alex
+{0x23, 0x00 ,0xFE}, //Reg 0x05 // alex
+{0x24, 0x00 ,0x00}, //Reg 0x05 // alex
+{0x25, 0x00 ,0xD8}, //Reg 0x05 // alex
+{0x26, 0x00 ,0xF0}, //Reg 0x05 // alex
+{0x27, 0x00 ,0xDF}, //Reg 0x05 // alex
+*/
+{0x3E, 0x00 ,0x0A}, //Reg 0x05 // alex
+
+{0xCB, 0x00 ,0x10}, //Reg 0x05 // alex
+{0xCF, 0x00 ,0x48}, //Reg 0x05 // alex
+
+
+{0x00, 0x00, 0x00} //End of table
+};
+
+#endif
+
+uint8_t SiS_ACPI_2_init[56][3]={
+{0x00, 0x00, 0xFF}, //Reg 0x00
+{0x01, 0x00, 0xFF}, //Reg 0x01
+{0x02, 0x00, 0x00}, //Reg 0x02
+{0x03, 0x00, 0x00}, //Reg 0x03
+{0x16, 0x00, 0x00}, //Reg 0x16
+{0x20, 0x00, 0xFF}, //Reg 0x20
+{0x21, 0x00, 0xFF}, //Reg 0x21
+{0x22, 0x00, 0x00}, //Reg 0x22
+{0x23, 0x00, 0x00}, //Reg 0x23
+{0x24, 0x00, 0x55}, //Reg 0x24
+{0x25, 0x00, 0x55}, //Reg 0x25
+{0x26, 0x00, 0x55}, //Reg 0x26
+{0x27, 0x00, 0x55}, //Reg 0x27
+{0x2A, 0x00, 0x40}, //Reg 0x2A
+{0x2B, 0x00, 0x10}, //Reg 0x2B
+{0x2E, 0x00, 0xFF}, //Reg 0x2E
+{0x30, 0x00, 0xFF}, //Reg 0x30
+{0x31, 0x00, 0xFF}, //Reg 0x31
+{0x32, 0x00, 0x00}, //Reg 0x32
+{0x33, 0x00, 0x00}, //Reg 0x33
+{0x40, 0x00, 0xFF}, //Reg 0x40
+{0x41, 0x00, 0xFF}, //Reg 0x41
+{0x42, 0x00, 0x00}, //Reg 0x42
+{0x43, 0x00, 0x00}, //Reg 0x43
+{0x4A, 0x00, 0x00}, //Reg 0x4A
+{0x4E, 0x00, 0x0F}, //Reg 0x4E
+{0x5A, 0x00, 0x00}, //Reg 0x5A
+{0x5B, 0x00, 0x00}, //Reg 0x5B
+{0x62, 0x00, 0x00}, //Reg 0x62
+{0x63, 0x00, 0x04}, //Reg 0x63
+{0x68, 0x00, 0xFF}, //Reg 0x68
+{0x76, 0x00, 0xA0}, //Reg 0x76
+{0x77, 0x00, 0x22}, //Reg 0x77
+{0x78, 0xDF, 0x20}, //Reg 0x78
+{0x7A, 0x00, 0x10}, //Reg 0x7A
+{0x7C, 0x00, 0x45}, //Reg 0x7C
+{0x7D, 0x00, 0xB8}, //Reg 0x7D
+{0x7F, 0x00, 0x00}, //Reg 0x7F
+{0x80, 0x00, 0x1C}, //Reg 0x80
+{0x82, 0x00, 0x01}, //Reg 0x82
+{0x84, 0x00, 0x0E}, //Reg 0x84
+{0x85, 0x00, 0x29}, //Reg 0x85
+{0x86, 0x00, 0xCB}, //Reg 0x86
+{0x87, 0x00, 0x55}, //Reg 0x87
+{0x88, 0x00, 0x04}, //Reg 0x88
+{0x96, 0x00, 0x80}, //Reg 0x96
+{0x99, 0x00, 0x80}, //Reg 0x99
+{0x9A, 0x00, 0x15}, //Reg 0x9A
+{0x9D, 0x00, 0x05}, //Reg 0x9D
+{0x9E, 0x00, 0x00}, //Reg 0x9E
+{0x9F, 0x00, 0x04}, //Reg 0x9F
+{0xB0, 0x00, 0x6D}, //Reg 0xB0
+{0xB1, 0x00, 0x8C}, //Reg 0xB1
+{0xB9, 0x00, 0xFF}, //Reg 0xB9
+{0xBA, 0x00, 0x3F}, //Reg 0xBA
+{0x00, 0x00, 0x00} //End of table
+};
+
+#if 0
+uint8_t SiS_SiS1183_init[60][3]={
+{0x04, 0x00, 0x05},
+{0x09, 0x00, 0x05},
+{0x2C, 0x00, 0x39},
+{0x2D, 0x00, 0x10},
+{0x2E, 0x00, 0x83},
+{0x2F, 0x00, 0x11},
+{0x90, 0x00, 0x40},
+{0x91, 0x00, 0x00}, // set mode
+{0x50, 0x00, 0xA2},
+{0x52, 0x00, 0xA2},
+{0x55, 0x00, 0x96},
+{0x52, 0x00, 0xA2},
+{0x55, 0xF7, 0x00},
+{0x56, 0x00, 0xC0},
+{0x57, 0x00, 0x14},
+{0x67, 0x00, 0x28},
+{0x81, 0x00, 0xB3},
+{0x82, 0x00, 0x72},
+{0x83, 0x00, 0x40},
+{0x85, 0x00, 0xB3},
+{0x86, 0x00, 0x72},
+{0x87, 0x00, 0x40},
+{0x88, 0x00, 0xDE}, // after set mode
+{0x89, 0x00, 0xB3},
+{0x8A, 0x00, 0x72},
+{0x8B, 0x00, 0x40},
+{0x8C, 0x00, 0xDE},
+{0x8D, 0x00, 0xB3},
+{0x8E, 0x00, 0x92},
+{0x8F, 0x00, 0x40},
+{0x93, 0x00, 0x00},
+{0x94, 0x00, 0x80},
+{0x95, 0x00, 0x08},
+{0x96, 0x00, 0x80},
+{0x97, 0x00, 0x08},
+{0x9C, 0x00, 0x80},
+{0x9D, 0x00, 0x08},
+{0x9E, 0x00, 0x80},
+{0x9F, 0x00, 0x08},
+{0xA0, 0x00, 0x15},
+{0xA1, 0x00, 0x15},
+{0xA2, 0x00, 0x15},
+{0xA3, 0x00, 0x15},
+
+//{0xD8, 0xFE, 0x01}, // Com reset
+//{0xC8, 0xFE, 0x01},
+//{0xE8, 0xFE, 0x01},
+//{0xF8, 0xFE, 0x01},
+{0xC4, 0xFF, 0xFF}, // Clear status
+{0xC5, 0xFF, 0xFF},
+{0xC6, 0xFF, 0xFF},
+{0xC7, 0xFF, 0xFF},
+{0xD4, 0xFF, 0xFF},
+{0xD5, 0xFF, 0xFF},
+{0xD6, 0xFF, 0xFF},
+{0xD7, 0xFF, 0xFF},
+{0xE4, 0xFF, 0xFF}, // Clear status
+{0xE5, 0xFF, 0xFF},
+{0xE6, 0xFF, 0xFF},
+{0xE7, 0xFF, 0xFF},
+{0xF4, 0xFF, 0xFF},
+{0xF5, 0xFF, 0xFF},
+{0xF6, 0xFF, 0xFF},
+{0xF7, 0xFF, 0xFF},
+{0x00, 0x00, 0x00} //End of table
+};
+
+#else
+
+uint8_t SiS_SiS1183_init[44][3]={
+{0x04, 0x00, 0x05},
+{0x09, 0x00, 0x05},
+{0x2C, 0x00, 0x39},
+{0x2D, 0x00, 0x10},
+{0x2E, 0x00, 0x83},
+{0x2F, 0x00, 0x11},
+{0x90, 0x00, 0x40},
+{0x91, 0x00, 0x00}, // set mode
+{0x50, 0x00, 0xA2},
+{0x52, 0x00, 0xA2},
+{0x55, 0x00, 0x96},
+{0x52, 0x00, 0xA2},
+{0x55, 0xF7, 0x00},
+{0x56, 0x00, 0xC0},
+{0x57, 0x00, 0x14},
+{0x67, 0x00, 0x28},
+{0x81, 0x00, 0xB3},
+{0x82, 0x00, 0x72},
+{0x83, 0x00, 0x40},
+{0x85, 0x00, 0xB3},
+{0x86, 0x00, 0x72},
+{0x87, 0x00, 0x40},
+{0x88, 0x00, 0xDE}, // after set mode
+{0x89, 0x00, 0xB3},
+{0x8A, 0x00, 0x72},
+{0x8B, 0x00, 0x40},
+{0x8C, 0x00, 0xDE},
+{0x8D, 0x00, 0xB3},
+{0x8E, 0x00, 0x92},
+{0x8F, 0x00, 0x40},
+{0x93, 0x00, 0x00},
+{0x94, 0x00, 0x80},
+{0x95, 0x00, 0x08},
+{0x96, 0x00, 0x80},
+{0x97, 0x00, 0x08},
+{0x9C, 0x00, 0x80},
+{0x9D, 0x00, 0x08},
+{0x9E, 0x00, 0x80},
+{0x9F, 0x00, 0x08},
+{0xA0, 0x00, 0x15},
+{0xA1, 0x00, 0x15},
+{0xA2, 0x00, 0x15},
+{0xA3, 0x00, 0x15},
+
+
+{0x00, 0x00, 0x00} //End of table
+};
+
+#endif
+
+/* In => Share Memory size
+ => 00h : 0MBytes
+ => 02h : 32MBytes
+ => 03h : 64MBytes
+ => 04h : 128MBytes
+ => Others: Reserved
+*/
+void Init_Share_Memory(uint8_t ShareSize)
+{
+ device_t dev;
+
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS761), 0);
+ pci_write_config8(dev, 0x4C, (pci_read_config8(dev, 0x4C) & 0x1F) | (ShareSize << 5));
+}
+
+/* In: => Aperture size
+ => 00h : 32MBytes
+ => 01h : 64MBytes
+ => 02h : 128MBytes
+ => 03h : 256MBytes
+ => 04h : 512MBytes
+ => Others: Reserved
+*/
+void Init_Aper_Size(uint8_t AperSize)
+{
+ device_t dev;
+ uint16_t SiSAperSizeTable[]={0x0F38, 0x0F30, 0x0F20, 0x0F00, 0x0E00};
+
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_AMD, 0x1103), 0);
+ pci_write_config8(dev, 0x90, AperSize << 1);
+
+//pci_write_config32(dev, 0x94, 0x78);
+//pci_write_config32(dev, 0x98, 0x0);
+
+#if 0
+{
+int i;
+print_debug("Function3 Config in sis_init_stage2\n");
+for(i=0;i<0xFF;i+=4)
+{ if((i%16)==0)
+ {print_debug("\r\n");print_debug_hex8(i);print_debug(" ");}
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+}
+print_debug("\n");
+}
+#endif
+
+dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS761), 0);
+pci_write_config16(dev, 0xB4, SiSAperSizeTable[AperSize]);
+
+#if 0
+{
+int i;
+dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_AMD, 0x1101), 0);
+print_debug("Function1 Config in sis_init_stage2\n");
+for(i=0;i<0xFF;i+=4)
+{ if((i%16)==0)
+ {print_debug("\r\n");print_debug_hex8(i);print_debug(" ");}
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+}
+print_debug("\n");
+}
+
+ #endif
+
+
+}
+
+
+
+
+
+void sis_init_stage1(void)
+{
+ device_t dev;
+ uint8_t temp8;
+ int i;
+ uint8_t GUI_En;
+
+#if 0
+{
+int i;
+print_debug("Northbridge PCI Config in sis_init_stage1.0\n");
+for(i=0;i<0xFF;i+=4)
+{ if((i%16)==0)
+ {print_debug("\r\n");print_debug_hex8(i);print_debug(" ");}
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+}
+print_debug("\n");
+}
+#endif
+
+// SiS_Chipset_Initialization
+// ========================== NB =============================
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS761), 0);
+ i=0;
+ while(SiS_NB_init[i][0] != 0)
+ { temp8 = pci_read_config8(dev, SiS_NB_init[i][0]);
+ temp8 &= SiS_NB_init[i][1];
+ temp8 |= SiS_NB_init[i][2];
+ pci_write_config8(dev, SiS_NB_init[i][0], temp8);
+ i++;
+ };
+
+
+#if 0
+{
+int i;
+print_debug("Northbridge PCI Config in sis_init_stage1.1\n");
+for(i=0;i<0xFF;i+=4)
+{ if((i%16)==0)
+ {print_debug("\r\n");print_debug_hex8(i);print_debug(" ");}
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+}
+print_debug("\n");
+}
+#endif
+
+
+
+// ========================== LPC =============================
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS966_LPC), 0);
+ i=0;
+ while(SiS_LPC_init[i][0] != 0)
+ { temp8 = pci_read_config8(dev, SiS_LPC_init[i][0]);
+ temp8 &= SiS_LPC_init[i][1];
+ temp8 |= SiS_LPC_init[i][2];
+ pci_write_config8(dev, SiS_LPC_init[i][0], temp8);
+ i++;
+ };
+// ========================== ACPI =============================
+ i=0;
+ while(SiS_ACPI_init[i][0] != 0)
+ { temp8 = inb(0x800 + SiS_ACPI_init[i][0]);
+ temp8 &= SiS_ACPI_init[i][1];
+ temp8 |= SiS_ACPI_init[i][2];
+ outb(temp8, 0x800 + SiS_ACPI_init[i][0]);
+ i++;
+ };
+// ========================== NBPCIE =============================
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS761), 0); //Disable Internal GUI enable bit
+ temp8 = pci_read_config8(dev, 0x4C);
+ GUI_En = temp8 & 0x10;
+ pci_write_config8(dev, 0x4C, temp8 & (!0x10));
+
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, 0x0004), 0);
+ i=0;
+ while(SiS_NBPCIE_init[i][0] != 0)
+ { temp8 = pci_read_config8(dev, SiS_NBPCIE_init[i][0]);
+ temp8 &= SiS_NBPCIE_init[i][1];
+ temp8 |= SiS_NBPCIE_init[i][2];
+ pci_write_config8(dev, SiS_NBPCIE_init[i][0], temp8);
+ i++;
+ };
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS761), 0); //Restore Internal GUI enable bit
+ temp8 = pci_read_config8(dev, 0x4C);
+ pci_write_config8(dev, 0x4C, temp8 | GUI_En);
+
+ return;
+}
+
+
+
+void sis_init_stage2(void)
+{
+ device_t dev;
+ msr_t msr;
+ int i;
+ uint32_t j;
+ uint8_t temp8;
+ uint16_t temp16;
+
+
+// ========================== NB_AGP =============================
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS761), 0); //Enable Internal GUI enable bit
+ pci_write_config8(dev, 0x4C, pci_read_config8(dev, 0x4C) | 0x10);
+
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, 0x0002), 0);
+ i=0;
+ while(SiS_NBAGP_init[i][0] != 0)
+ { temp8 = pci_read_config8(dev, SiS_NBAGP_init[i][0]);
+ temp8 &= SiS_NBAGP_init[i][1];
+ temp8 |= SiS_NBAGP_init[i][2];
+ pci_write_config8(dev, SiS_NBAGP_init[i][0], temp8);
+ i++;
+ };
+
+/* In => Share Memory size
+ => 00h : 0MBytes
+ => 02h : 32MBytes
+ => 03h : 64MBytes
+ => 04h : 128MBytes
+ => Others: Reserved
+*/
+/* In: => Aperture size
+ => 00h : 32MBytes
+ => 01h : 64MBytes
+ => 02h : 128MBytes
+ => 03h : 256MBytes
+ => 04h : 512MBytes
+ => Others: Reserved
+*/
+
+ Init_Share_Memory(0x02); //0x02 : 32M 0x03 : 64M
+ Init_Aper_Size(0x01); // 0x1
+
+#if 0
+{
+int i;
+print_debug("AGP PCI Config in sis_init_stage2\n");
+for(i=0;i<0xFF;i+=4)
+{ if((i%16)==0)
+ {print_debug("\r\n");print_debug_hex8(i);print_debug(" ");}
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+}
+print_debug("\n");
+}
+#endif
+
+
+// ========================== NB =============================
+
+ printk_debug("Init NorthBridge sis761 -------->\n");
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS761), 0);
+ msr = rdmsr(0xC001001A);
+ printk_debug("Memory Top Bound %lx\n",msr.lo );
+// pci_write_config16(dev, 0x8E, msr.lo >> 16); // Topbound
+// pci_write_config16(dev, 0x8E, (msr.lo >> 16) - ((pci_read_config8(dev, 0x4C) & 0xE0) >> 5));
+
+ temp16=(pci_read_config8(dev, 0x4C) & 0xE0) >> 5;
+ //printk_debug("0x4c = %x\n",temp16);
+ temp16=0x0001<<(temp16-1);
+ temp16<<=8;
+
+ printk_debug("Integrated VGA Shared memory size=%dM bytes\n", temp16 >> 4);
+ pci_write_config16(dev, 0x8E, (msr.lo >> 16) -temp16*1);
+ // pci_write_config16(dev, 0x8E, (msr.lo >> 16) -temp16);
+ pci_write_config8(dev, 0x7F, 0x08); // ACPI Base
+ outb(inb(0x856) | 0x40, 0x856); // Auto-Reset Function
+
+#if 0
+{
+int i;
+print_debug("Northbridge PCI Config in sis_init_stage2\n");
+for(i=0;i<0xFF;i+=4)
+{ if((i%16)==0)
+ {print_debug("\r\n");print_debug_hex8(i);print_debug(" ");}
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+}
+print_debug("\n");
+}
+#endif
+
+
+
+
+// ========================== ACPI =============================
+ i=0;
+ printk_debug("Init ACPI -------->\n");
+ do
+ { temp8 = inb(0x800 + SiS_ACPI_2_init[i][0]);
+ temp8 &= SiS_ACPI_2_init[i][1];
+ temp8 |= SiS_ACPI_2_init[i][2];
+ outb(temp8, 0x800 + SiS_ACPI_2_init[i][0]);
+ i++;
+ }while(SiS_ACPI_2_init[i][0] != 0);
+
+// ========================== Misc =============================
+ printk_debug("Init Misc -------->\n");
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS966_ISA), 0);
+ // PCI Device Enable
+ pci_write_config8(dev, 0x7C, 0x03); // bit0=0 : enable audio controller(), bit1=1 : disable modem
+ pci_write_config8(dev, 0x76, pci_read_config8(dev, 0x76)|0x30); // SM bus enable, PCIEXP Controller 1 and 2 disable
+ pci_write_config8(dev, 0x7E, 0x00); // azalia controller enable
+
+ temp8=inb(0x878)|0x4; //bit2=1 enable Azalia =0 enable AC97
+ outb(temp8, 0x878); // ACPI select AC97 or HDA controller
+ printk_debug("Audio select %x\n",inb(0x878));
+
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, 0x1183), 0);
+ if(!dev){
+ print_debug("SiS 1183 does not exist !!");
+ }
+ // SATA Set Mode
+ pci_write_config8(dev, 0x90, (pci_read_config8(dev, 0x90)&0x3F) | 0x40);
+
+
+//-------------- enable IDE (SiS1183) -------------------------
+/*
+{
+ uint8_t temp8;
+ int i=0;
+ while(SiS_SiS1183_init[i][0] != 0)
+ { temp8 = pci_read_config8(dev, SiS_SiS1183_init[i][0]);
+ temp8 &= SiS_SiS1183_init[i][1];
+ temp8 |= SiS_SiS1183_init[i][2];
+ pci_write_config8(dev, SiS_SiS1183_init[i][0], temp8);
+ i++;
+ };
+}
+
+*/
+
+}
+
+
+
+static void enable_smbus(void)
+{
+ device_t dev;
+ uint8_t temp8;
+ printk_debug("enable_smbus -------->\n");
+
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS966_LPC), 0);
+
+ /* set smbus iobase && enable ACPI Space*/
+ pci_write_config16(dev, 0x74, 0x0800); // Set ACPI Base
+ temp8=pci_read_config8(dev, 0x40); // Enable ACPI Space
+ pci_write_config8(dev, 0x40, temp8 | 0x80);
+ temp8=pci_read_config8(dev, 0x76); // Enable SMBUS
+ pci_write_config8(dev, 0x76, temp8 | 0x03);
+
+ printk_debug("enable_smbus <--------\n");
+}
+
+static int smbus_read_byte(unsigned device, unsigned address)
+{
+ return do_smbus_read_byte(SMBUS0_IO_BASE, device, address);
+}
+static int smbus_write_byte(unsigned device, unsigned address, unsigned char val)
+{
+ return do_smbus_write_byte(SMBUS0_IO_BASE, device, address, val);
+}
+
diff --git a/src/southbridge/sis/sis966/sis966_enable_rom.c b/src/southbridge/sis/sis966/sis966_enable_rom.c
new file mode 100644
index 0000000000..f0b1f9f242
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_enable_rom.c
@@ -0,0 +1,41 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+ #define SIS966_DEVN_BASE HT_CHAIN_END_UNITID_BASE
+#else
+ #define SIS966_DEVN_BASE HT_CHAIN_UNITID_BASE
+#endif
+
+static void sis966_enable_rom(void)
+{
+ device_t addr;
+
+ /* Enable 4MB rom access at 0xFFC00000 - 0xFFFFFFFF */
+ addr = pci_locate_device(PCI_ID(0x1039, 0x0966), 0);
+
+ /* Set the 4MB enable bit bit */
+ pci_write_config8(addr, 0x40, pci_read_config8(addr, 0x40) | 0x11);
+}
diff --git a/src/southbridge/sis/sis966/sis966_enable_usbdebug_direct.c b/src/southbridge/sis/sis966/sis966_enable_usbdebug_direct.c
new file mode 100644
index 0000000000..07b10fea4c
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_enable_usbdebug_direct.c
@@ -0,0 +1,50 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+ #define SIS966_DEVN_BASE HT_CHAIN_END_UNITID_BASE
+#else
+ #define SIS966_DEVN_BASE HT_CHAIN_UNITID_BASE
+#endif
+
+#define EHCI_BAR_INDEX 0x10
+#define EHCI_BAR 0xFEF00000
+#define EHCI_DEBUG_OFFSET 0x98
+
+static void set_debug_port(unsigned port)
+{
+ uint32_t dword;
+ dword = pci_read_config32(PCI_DEV(0, SIS966_DEVN_BASE+2, 1), 0x74);
+ dword &= ~(0xf<<12);
+ dword |= (port<<12);
+ pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+2, 1), 0x74, dword);
+
+}
+
+static void sis966_enable_usbdebug_direct(unsigned port)
+{
+ set_debug_port(port);
+ pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+2, 1), EHCI_BAR_INDEX, EHCI_BAR);
+ pci_write_config8(PCI_DEV(0, SIS966_DEVN_BASE+2, 1), 0x04, 0x2); // mem space enabe
+}
+
diff --git a/src/southbridge/sis/sis966/sis966_ht.c b/src/southbridge/sis/sis966/sis966_ht.c
new file mode 100644
index 0000000000..702138d8da
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_ht.c
@@ -0,0 +1,56 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sis966.h"
+
+static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ pci_write_config32(dev, 0x40,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+static struct pci_operations lops_pci = {
+ .set_subsystem = lpci_set_subsystem,
+};
+
+static struct device_operations ht_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = 0,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver ht_driver __pci_driver = {
+ .ops = &ht_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_HT,
+};
+
diff --git a/src/southbridge/sis/sis966/sis966_ide.c b/src/southbridge/sis/sis966/sis966_ide.c
new file mode 100644
index 0000000000..0b2b3439aa
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_ide.c
@@ -0,0 +1,175 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include "sis966.h"
+
+uint8_t SiS_SiS5513_init[49][3]={
+{0x04, 0xFF, 0x05},
+{0x0D, 0xFF, 0x80},
+{0x2C, 0xFF, 0x39},
+{0x2D, 0xFF, 0x10},
+{0x2E, 0xFF, 0x13},
+{0x2F, 0xFF, 0x55},
+{0x50, 0xFF, 0xA2},
+{0x51, 0xFF, 0x21},
+{0x53, 0xFF, 0x21},
+{0x54, 0xFF, 0x2A},
+{0x55, 0xFF, 0x96},
+{0x52, 0xFF, 0xA2},
+{0x56, 0xFF, 0x81},
+{0x57, 0xFF, 0xC0},
+{0x60, 0xFF, 0xFB},
+{0x61, 0xFF, 0xAA},
+{0x62, 0xFF, 0xFB},
+{0x63, 0xFF, 0xAA},
+{0x81, 0xFF, 0xB3},
+{0x82, 0xFF, 0x72},
+{0x83, 0xFF, 0x40},
+{0x85, 0xFF, 0xB3},
+{0x86, 0xFF, 0x72},
+{0x87, 0xFF, 0x40},
+{0x94, 0xFF, 0xC0},
+{0x95, 0xFF, 0x08},
+{0x96, 0xFF, 0xC0},
+{0x97, 0xFF, 0x08},
+{0x98, 0xFF, 0xCC},
+{0x99, 0xFF, 0x04},
+{0x9A, 0xFF, 0x0C},
+{0x9B, 0xFF, 0x14},
+{0xA0, 0xFF, 0x11},
+{0x57, 0xFF, 0xD0},
+
+{0xD8, 0xFE, 0x01}, // Com reset
+{0xC8, 0xFE, 0x01},
+{0xC4, 0xFF, 0xFF}, // Clear status
+{0xC5, 0xFF, 0xFF},
+{0xC6, 0xFF, 0xFF},
+{0xC7, 0xFF, 0xFF},
+{0xD4, 0xFF, 0xFF},
+{0xD5, 0xFF, 0xFF},
+{0xD6, 0xFF, 0xFF},
+{0xD7, 0xFF, 0xFF},
+
+
+{0x2C, 0xFF, 0x39}, // set subsystem ID
+{0x2D, 0xFF, 0x10},
+{0x2E, 0xFF, 0x13},
+{0x2F, 0xFF, 0x55},
+
+
+{0x00, 0x00, 0x00} //End of table
+};
+
+static void ide_init(struct device *dev)
+{
+ struct southbridge_sis_sis966_config *conf;
+ /* Enable ide devices so the linux ide driver will work */
+ uint32_t dword;
+ uint16_t word;
+ uint8_t byte;
+ conf = dev->chip_info;
+
+
+
+printk_debug("ide_init:---------->\n");
+
+
+//-------------- enable IDE (SiS5513) -------------------------
+{
+ uint8_t temp8;
+ int i=0;
+ while(SiS_SiS5513_init[i][0] != 0)
+ { temp8 = pci_read_config8(dev, SiS_SiS5513_init[i][0]);
+ temp8 &= SiS_SiS5513_init[i][1];
+ temp8 |= SiS_SiS5513_init[i][2];
+ pci_write_config8(dev, SiS_SiS5513_init[i][0], temp8);
+ i++;
+ };
+}
+//-----------------------------------------------------------
+
+ word = pci_read_config16(dev, 0x50);
+ /* Ensure prefetch is disabled */
+ word &= ~((1 << 15) | (1 << 13));
+ if (conf->ide1_enable) {
+ /* Enable secondary ide interface */
+ word |= (1<<0);
+ printk_debug("IDE1 \t");
+ }
+ if (conf->ide0_enable) {
+ /* Enable primary ide interface */
+ word |= (1<<1);
+ printk_debug("IDE0\n");
+ }
+
+ word |= (1<<12);
+ word |= (1<<14);
+
+ pci_write_config16(dev, 0x50, word);
+
+
+ byte = 0x20 ; // Latency: 64-->32
+ pci_write_config8(dev, 0xd, byte);
+
+ dword = pci_read_config32(dev, 0xf8);
+ dword |= 12;
+ pci_write_config32(dev, 0xf8, dword);
+#if CONFIG_PCI_ROM_RUN == 1
+ pci_dev_init(dev);
+#endif
+
+}
+
+static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ pci_write_config32(dev, 0x40,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+static struct pci_operations lops_pci = {
+ .set_subsystem = lpci_set_subsystem,
+};
+
+static struct device_operations ide_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = ide_init,
+ .scan_bus = 0,
+// .enable = sis966_enable,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver ide_driver __pci_driver = {
+ .ops = &ide_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_IDE,
+};
+
diff --git a/src/southbridge/sis/sis966/sis966_lpc.c b/src/southbridge/sis/sis966/sis966_lpc.c
new file mode 100644
index 0000000000..efb7b2e151
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_lpc.c
@@ -0,0 +1,451 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2003 Linux Networx
+ * Copyright (C) 2003 SuSE Linux AG
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pnp.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <pc80/mc146818rtc.h>
+#include <pc80/isa-dma.h>
+#include <bitops.h>
+#include <arch/io.h>
+#include <cpu/x86/lapic.h>
+#include "sis966.h"
+#include <pc80/keyboard.h>
+
+#define NMI_OFF 0
+
+struct ioapicreg {
+ unsigned int reg;
+ unsigned int value_low, value_high;
+};
+
+static struct ioapicreg ioapicregvalues[] = {
+#define ALL (0xff << 24)
+#define NONE (0)
+#define DISABLED (1 << 16)
+#define ENABLED (0 << 16)
+#define TRIGGER_EDGE (0 << 15)
+#define TRIGGER_LEVEL (1 << 15)
+#define POLARITY_HIGH (0 << 13)
+#define POLARITY_LOW (1 << 13)
+#define PHYSICAL_DEST (0 << 11)
+#define LOGICAL_DEST (1 << 11)
+#define ExtINT (7 << 8)
+#define NMI (4 << 8)
+#define SMI (2 << 8)
+#define INT (1 << 8)
+ /* IO-APIC virtual wire mode configuration */
+ /* mask, trigger, polarity, destination, delivery, vector */
+ { 0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT, NONE},
+ { 1, DISABLED, NONE},
+ { 2, DISABLED, NONE},
+ { 3, DISABLED, NONE},
+ { 4, DISABLED, NONE},
+ { 5, DISABLED, NONE},
+ { 6, DISABLED, NONE},
+ { 7, DISABLED, NONE},
+ { 8, DISABLED, NONE},
+ { 9, DISABLED, NONE},
+ { 10, DISABLED, NONE},
+ { 11, DISABLED, NONE},
+ { 12, DISABLED, NONE},
+ { 13, DISABLED, NONE},
+ { 14, DISABLED, NONE},
+ { 15, DISABLED, NONE},
+ { 16, DISABLED, NONE},
+ { 17, DISABLED, NONE},
+ { 18, DISABLED, NONE},
+ { 19, DISABLED, NONE},
+ { 20, DISABLED, NONE},
+ { 21, DISABLED, NONE},
+ { 22, DISABLED, NONE},
+ { 23, DISABLED, NONE},
+ /* Be careful and don't write past the end... */
+};
+
+static void setup_ioapic(unsigned long ioapic_base)
+{
+ int i;
+ unsigned long value_low, value_high;
+// unsigned long ioapic_base = 0xfec00000;
+ volatile unsigned long *l;
+ struct ioapicreg *a = ioapicregvalues;
+
+ ioapicregvalues[0].value_high = lapicid()<<(56-32);
+
+ l = (unsigned long *) ioapic_base;
+
+ for (i = 0; i < sizeof(ioapicregvalues) / sizeof(ioapicregvalues[0]);
+ i++, a++) {
+ l[0] = (a->reg * 2) + 0x10;
+ l[4] = a->value_low;
+ value_low = l[4];
+ l[0] = (a->reg *2) + 0x11;
+ l[4] = a->value_high;
+ value_high = l[4];
+ if ((i==0) && (value_low == 0xffffffff)) {
+ printk_warning("IO APIC not responding.\n");
+ return;
+ }
+ printk_spew("for IRQ, reg 0x%08x value 0x%08x 0x%08x\n",
+ a->reg, a->value_low, a->value_high);
+ }
+}
+
+// 0x7a or e3
+#define PREVIOUS_POWER_STATE 0x7A
+
+#define MAINBOARD_POWER_OFF 0
+#define MAINBOARD_POWER_ON 1
+#define SLOW_CPU_OFF 0
+#define SLOW_CPU__ON 1
+
+#ifndef MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+#define MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
+#endif
+
+static void lpc_common_init(device_t dev)
+{
+ uint8_t byte;
+ uint32_t dword;
+
+ /* IO APIC initialization */
+ byte = pci_read_config8(dev, 0x74);
+ byte |= (1<<0); // enable APIC
+ pci_write_config8(dev, 0x74, byte);
+ dword = pci_read_config32(dev, PCI_BASE_ADDRESS_1); // 0x14
+
+ setup_ioapic(dword);
+
+}
+
+static void lpc_slave_init(device_t dev)
+{
+ lpc_common_init(dev);
+}
+
+#if 0
+static void enable_hpet(struct device *dev)
+{
+ unsigned long hpet_address;
+
+ pci_write_config32(dev,0x44, 0xfed00001);
+ hpet_address=pci_read_config32(dev,0x44)& 0xfffffffe;
+ printk_debug("enabling HPET @0x%x\n", hpet_address);
+}
+#endif
+
+static void lpc_usb_legacy_init(device_t dev)
+{
+ uint16_t acpi_base;
+
+ acpi_base = (pci_read_config8(dev,0x75) << 8);
+ //printk_debug("ACPI Base Addr=0x%4.4x\n",acpi_base);
+
+ //printk_debug("acpi_base + 0xbb=%.2x\n", inb(acpi_base + 0xbb));
+ //printk_debug("acpi_base + 0xba=%.2x\n", inb(acpi_base + 0xba));
+
+ outb(inb(acpi_base + 0xbb) |0x80, acpi_base + 0xbb);
+ outb(inb(acpi_base + 0xba) |0x80, acpi_base + 0xba);
+
+ //printk_debug("acpi_base + 0xbb=%.2x\n", inb(acpi_base + 0xbb));
+ //printk_debug("acpi_base + 0xba=%.2x\n", inb(acpi_base + 0xba));
+
+ return;
+}
+
+static void lpc_init(device_t dev)
+{
+ uint8_t byte;
+ uint8_t byte_old;
+ int on;
+ int nmi_option;
+
+ printk_debug("lpc_init -------->\n");
+ init_pc_keyboard(0x60, 0x64, 0);
+
+#if 0
+ {
+ int i;
+ printk_debug("LPC PCI config \n");
+ for(i=0;i<0xFF;i+=4)
+ {
+ if((i%16)==0)
+ {
+ print_debug("\r\n");
+ print_debug_hex8(i);
+ print_debug(" ");}
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+ }
+ print_debug("\r\n");
+ }
+#endif
+ printk_debug("lpc_init <--------\n");
+ lpc_usb_legacy_init(dev);
+ return;
+
+ printk_debug("lpc_init\r\n");
+ lpc_common_init(dev);
+ printk_debug("lpc_init2\r\n");
+
+
+#if 0
+ /* posted memory write enable */
+ byte = pci_read_config8(dev, 0x46);
+ pci_write_config8(dev, 0x46, byte | (1<<0));
+
+#endif
+ /* power after power fail */
+
+#if 1
+ on = MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+ get_option(&on, "power_on_after_fail");
+ byte = pci_read_config8(dev, PREVIOUS_POWER_STATE);
+ byte &= ~0x40;
+ if (!on) {
+ byte |= 0x40;
+ }
+ pci_write_config8(dev, PREVIOUS_POWER_STATE, byte);
+ printk_info("set power %s after power fail\n", on?"on":"off");
+#endif
+ /* Throttle the CPU speed down for testing */
+ on = SLOW_CPU_OFF;
+ get_option(&on, "slow_cpu");
+ if(on) {
+ uint16_t pm10_bar;
+ uint32_t dword;
+ pm10_bar = (pci_read_config16(dev, 0x60)&0xff00);
+ outl(((on<<1)+0x10) ,(pm10_bar + 0x10));
+ dword = inl(pm10_bar + 0x10);
+ on = 8-on;
+ printk_debug("Throttling CPU %2d.%1.1d percent.\n",
+ (on*12)+(on>>1),(on&1)*5);
+ }
+
+#if 0
+// default is enabled
+ /* Enable Port 92 fast reset */
+ byte = pci_read_config8(dev, 0xe8);
+ byte |= ~(1 << 3);
+ pci_write_config8(dev, 0xe8, byte);
+#endif
+
+ /* Enable Error reporting */
+ /* Set up sync flood detected */
+ byte = pci_read_config8(dev, 0x47);
+ byte |= (1 << 1);
+ pci_write_config8(dev, 0x47, byte);
+
+ /* Set up NMI on errors */
+ byte = inb(0x70); // RTC70
+ byte_old = byte;
+ nmi_option = NMI_OFF;
+ get_option(&nmi_option, "nmi");
+ if (nmi_option) {
+ byte &= ~(1 << 7); /* set NMI */
+ } else {
+ byte |= ( 1 << 7); // Can not mask NMI from PCI-E and NMI_NOW
+ }
+ if( byte != byte_old) {
+ outb(0x70, byte);
+ }
+
+ /* Initialize the real time clock */
+ rtc_init(0);
+
+ /* Initialize isa dma */
+ isa_dma_init();
+
+ /* Initialize the High Precision Event Timers */
+// enable_hpet(dev);
+
+}
+
+static void sis966_lpc_read_resources(device_t dev)
+{
+ struct resource *res;
+ unsigned long index;
+
+ /* Get the normal pci resources of this device */
+ pci_dev_read_resources(dev); // We got one for APIC, or one more for TRAP
+
+ /* Add an extra subtractive resource for both memory and I/O */
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
+ res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
+ res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+
+}
+
+/**
+ * @brief Enable resources for children devices
+ *
+ * @param dev the device whos children's resources are to be enabled
+ *
+ * This function is call by the global enable_resources() indirectly via the
+ * device_operation::enable_resources() method of devices.
+ *
+ * Indirect mutual recursion:
+ * enable_childrens_resources() -> enable_resources()
+ * enable_resources() -> device_operation::enable_resources()
+ * device_operation::enable_resources() -> enable_children_resources()
+ */
+static void sis966_lpc_enable_childrens_resources(device_t dev)
+{
+ unsigned link;
+ uint32_t reg, reg_var[4];
+ int i;
+ int var_num = 0;
+
+ reg = pci_read_config32(dev, 0xa0);
+
+ for (link = 0; link < dev->links; link++) {
+ device_t child;
+ for (child = dev->link[link].children; child; child = child->sibling) {
+ enable_resources(child);
+ if(child->have_resources && (child->path.type == DEVICE_PATH_PNP)) {
+ for(i=0;i<child->resources;i++) {
+ struct resource *res;
+ unsigned long base, end; // don't need long long
+ res = &child->resource[i];
+ if(!(res->flags & IORESOURCE_IO)) continue;
+ base = res->base;
+ end = resource_end(res);
+ printk_debug("sis966 lpc decode:%s, base=0x%08x, end=0x%08x\n",dev_path(child),base, end);
+ switch(base) {
+ case 0x3f8: // COM1
+ reg |= (1<<0); break;
+ case 0x2f8: // COM2
+ reg |= (1<<1); break;
+ case 0x378: // Parallal 1
+ reg |= (1<<24); break;
+ case 0x3f0: // FD0
+ reg |= (1<<20); break;
+ case 0x220: // Aduio 0
+ reg |= (1<<8); break;
+ case 0x300: // Midi 0
+ reg |= (1<<12); break;
+ }
+ if( (base == 0x290) || (base >= 0x400)) {
+ if(var_num>=4) continue; // only 4 var ; compact them ?
+ reg |= (1<<(28+var_num));
+ reg_var[var_num++] = (base & 0xffff)|((end & 0xffff)<<16);
+ }
+ }
+ }
+ }
+ }
+ pci_write_config32(dev, 0xa0, reg);
+ for(i=0;i<var_num;i++) {
+ pci_write_config32(dev, 0xa8 + i*4, reg_var[i]);
+ }
+
+
+}
+
+static void sis966_lpc_enable_resources(device_t dev)
+{
+ pci_dev_enable_resources(dev);
+ sis966_lpc_enable_childrens_resources(dev);
+}
+
+static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ pci_write_config32(dev, 0x40,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = lpci_set_subsystem,
+};
+
+static struct device_operations lpc_ops = {
+ .read_resources = sis966_lpc_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = sis966_lpc_enable_resources,
+ .init = lpc_init,
+ .scan_bus = scan_static_bus,
+// .enable = sis966_enable,
+ .ops_pci = &lops_pci,
+};
+static struct pci_driver lpc_driver __pci_driver = {
+ .ops = &lpc_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_LPC,
+};
+
+static struct pci_driver lpc_driver_pro __pci_driver = {
+ .ops = &lpc_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_PRO,
+};
+
+static struct pci_driver lpc_driver_lpc2 __pci_driver = {
+ .ops = &lpc_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_LPC_2,
+};
+static struct pci_driver lpc_driver_lpc3 __pci_driver = {
+ .ops = &lpc_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_LPC_3,
+};
+static struct pci_driver lpc_driver_lpc4 __pci_driver = {
+ .ops = &lpc_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_LPC_4,
+};
+static struct pci_driver lpc_driver_lpc5 __pci_driver = {
+ .ops = &lpc_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_LPC_5,
+};
+static struct pci_driver lpc_driver_lpc6 __pci_driver = {
+ .ops = &lpc_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_LPC_6,
+};
+
+static struct device_operations lpc_slave_ops = {
+ .read_resources = sis966_lpc_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = lpc_slave_init,
+// .enable = sis966_enable,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver lpc_driver_slave __pci_driver = {
+ .ops = &lpc_slave_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_SLAVE,
+};
diff --git a/src/southbridge/sis/sis966/sis966_nic.c b/src/southbridge/sis/sis966/sis966_nic.c
new file mode 100644
index 0000000000..b40adb5e4b
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_nic.c
@@ -0,0 +1,643 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/smbus.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include <delay.h>
+#include "sis966.h"
+
+
+uint8_t SiS_SiS191_init[6][3]={
+{0x04, 0xFF, 0x07},
+{0x2C, 0xFF, 0x39},
+{0x2D, 0xFF, 0x10},
+{0x2E, 0xFF, 0x91},
+{0x2F, 0xFF, 0x01},
+{0x00, 0x00, 0x00} //End of table
+};
+
+#if 1
+#define StatusReg 0x1
+#define SMI_READ 0x0
+#define SMI_REQUEST 0x10
+#define TRUE 1
+#define FALSE 0
+
+uint16_t MacAddr[3];
+
+
+void writeApcByte(int addr, uint8_t value)
+{
+ outb(addr,0x78);
+ outb(value,0x79);
+}
+uint8_t readApcByte(int addr)
+{
+ uint8_t value;
+ outb(addr,0x78);
+ value=inb(0x79);
+ return(value);
+}
+
+static void readApcMacAddr(void)
+{
+ uint8_t i;
+
+// enable APC in south bridge sis966 D2F0
+
+ outl(0x80001048,0xcf8);
+ outl((inl(0xcfc) & 0xfffffffd),0xcfc ); // enable IO78/79h for APC Index/Data
+
+ printk_debug("MAC addr in APC = ");
+ for(i = 0x9 ; i <=0xe ; i++)
+ {
+ printk_debug("%2.2x",readApcByte(i));
+ }
+ printk_debug("\n");
+
+ /* Set APC Reload */
+ writeApcByte(0x7,readApcByte(0x7)&0xf7);
+ writeApcByte(0x7,readApcByte(0x7)|0x0a);
+
+ /* disable APC in south bridge */
+ outl(0x80001048,0xcf8);
+ outl(inl(0xcfc)&0xffffffbf,0xcfc);
+}
+
+static void set_apc(struct device *dev)
+{
+ uint32_t tmp;
+ uint16_t addr;
+ uint32_t idx;
+ uint16_t i;
+ uint8_t bTmp;
+
+ /* enable APC in south bridge sis966 D2F0 */
+ outl(0x80001048,0xcf8);
+ outl((inl(0xcfc) & 0xfffffffd),0xcfc ); // enable IO78/79h for APC Index/Data
+
+ for(i = 0 ; i <3; i++)
+ {
+ addr=0x9+2*i;
+ writeApcByte(addr,(uint8_t)(MacAddr[i]&0xFF));
+ writeApcByte(addr+1L,(uint8_t)((MacAddr[i]>>8)&0xFF));
+ // printf("%x - ",readMacAddrByte(0x59+i));
+ }
+
+ /* Set APC Reload */
+ writeApcByte(0x7,readApcByte(0x7)&0xf7);
+ writeApcByte(0x7,readApcByte(0x7)|0x0a);
+
+ /* disable APC in south bridge */
+ outl(0x80001048,0xcf8);
+ outl(inl(0xcfc)&0xffffffbf,0xcfc);
+
+ // CFG reg0x73 bit=1, tell driver MAC Address load to APC
+ bTmp = pci_read_config8(dev, 0x73);
+ bTmp|=0x1;
+ pci_write_config8(dev, 0x73, bTmp);
+}
+
+//-----------------------------------------------------------------------------
+// Procedure: ReadEEprom
+//
+// Description: This routine serially reads one word out of the EEPROM.
+//
+// Arguments:
+// Reg - EEPROM word to read.
+//
+// Returns:
+// Contents of EEPROM word (Reg).
+//-----------------------------------------------------------------------------
+#define LoopNum 200
+static unsigned long ReadEEprom( struct device *dev, uint32_t base, uint32_t Reg)
+{
+ uint16_t data;
+ uint32_t i;
+ uint32_t ulValue;
+
+
+ ulValue = (0x80 | (0x2 << 8) | (Reg << 10)); //BIT_7
+
+ writel( ulValue,base+0x3c);
+
+ mdelay(10);
+
+ for(i=0 ; i <= LoopNum; i++)
+ {
+ ulValue=readl(base+0x3c);
+
+ if(!(ulValue & 0x0080)) //BIT_7
+ break;
+
+ mdelay(100);
+ }
+
+ mdelay(50);
+
+ if(i==LoopNum) data=0x10000;
+ else{
+ ulValue=readl(base+0x3c);
+ data = (uint16_t)((ulValue & 0xffff0000) >> 16);
+ }
+
+ return data;
+}
+
+static int phy_read(uint32_t base, unsigned phy_addr, unsigned phy_reg)
+{
+ uint32_t ulValue;
+ unsigned loop = 0x100;
+ uint32_t Read_Cmd;
+ uint16_t usData;
+
+ uint16_t tmp;
+
+
+ Read_Cmd = ((phy_reg << 11) |
+ (phy_addr << 6) |
+ SMI_READ |
+ SMI_REQUEST);
+
+ // SmiMgtInterface Reg is the SMI management interface register(offset 44h) of MAC
+ writel( Read_Cmd,base+0x44);
+ //outl( Read_Cmd,tmp+0x44);
+
+ // Polling SMI_REQ bit to be deasserted indicated read command completed
+ do
+ {
+ // Wait 20 usec before checking status
+ //StallAndWait(20);
+ mdelay(20);
+ ulValue = readl(base+0x44);
+ //ulValue = inl(tmp+0x44);
+ } while((ulValue & SMI_REQUEST) != 0);
+ //printk_debug("base %x cmd %lx ret val %lx\n", tmp,Read_Cmd,ulValue);
+ usData=(ulValue>>16);
+
+
+
+ return usData;
+
+}
+
+// Detect a valid PHY
+// If there exist a valid PHY then return TRUE, else return FALSE
+static int phy_detect(uint32_t base,uint16_t *PhyAddr) //BOOL PHY_Detect()
+{
+ int bFoundPhy = FALSE;
+ uint32_t Read_Cmd;
+ uint16_t usData;
+ int PhyAddress = 0;
+
+
+ // Scan all PHY address(0 ~ 31) to find a valid PHY
+ for(PhyAddress = 0; PhyAddress < 32; PhyAddress++)
+ {
+ usData=phy_read(base,PhyAddress,StatusReg); // Status register is a PHY's register(offset 01h)
+
+ // Found a valid PHY
+
+ if((usData != 0x0) && (usData != 0xffff))
+ {
+ bFoundPhy = TRUE;
+ break;
+ }
+ }
+// printk_debug(" PHY_Addr=%x\n",PhyAddress);
+
+ //usData=phy_read(base,PhyAddress,0x0);
+ //printk_debug("PHY=%x\n",usData);
+
+ if(!bFoundPhy)
+ {
+ printk_debug("PHY not found !!!! \n");
+ // DisableMac();
+ }
+
+ *PhyAddr=PhyAddress;
+
+ return bFoundPhy;
+}
+
+
+static void nic_init(struct device *dev)
+{
+ uint32_t dword, old;
+ uint32_t mac_h, mac_l;
+ int eeprom_valid = 0;
+ int val;
+ uint16_t PhyAddr;
+ struct southbridge_sis_sis966_config *conf;
+
+ static uint32_t nic_index = 0;
+
+ uint32_t base;
+ struct resource *res;
+ uint32_t reg;
+
+
+printk_debug("SIS NIC init-------->\r\n");
+
+
+//-------------- enable NIC (SiS19x) -------------------------
+{
+ uint8_t temp8;
+ int i=0;
+ while(SiS_SiS191_init[i][0] != 0)
+ { temp8 = pci_read_config8(dev, SiS_SiS191_init[i][0]);
+ temp8 &= SiS_SiS191_init[i][1];
+ temp8 |= SiS_SiS191_init[i][2];
+ pci_write_config8(dev, SiS_SiS191_init[i][0], temp8);
+ i++;
+ };
+}
+//-----------------------------------------------------------
+
+
+
+
+{
+unsigned long i;
+unsigned long ulValue;
+
+#if 0
+for(i=0;i<0xFF;i+=4)
+{ if((i%16)==0)
+ {print_debug("\r\n");print_debug_hex8(i);print_debug(" ");}
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+}
+print_debug("\r\n");
+#endif
+ res = find_resource(dev, 0x10);
+
+ if(!res) return;
+
+ base = res->base;
+printk_debug("NIC base address %lx\n",base);
+ if(!(val=phy_detect(base,&PhyAddr)))
+ {
+ printk_debug("PHY detect fail !!!!\r\n");
+ return;
+ }
+
+#if 0
+//------------ show op registers ----------------------
+{
+//device_t dev;
+int i;
+//dev = pci_locate_device(PCI_ID(0x1039, 0x5513), 0);
+printk_debug("NIC OP Registers \n");
+for(i=0;i<0xFF;i+=4)
+{ if((i%16)==0)
+ {print_debug("\r\n");print_debug_hex8(i);print_debug(" ");}
+ print_debug_hex32(readl(base+i));
+ print_debug(" ");
+}
+
+}
+
+//----------------------------------------------------
+#endif
+
+ ulValue=readl(base + 0x38L); // check EEPROM existing
+
+ if((ulValue & 0x0002))
+ {
+
+ // read MAC address from EEPROM at first
+
+ // if that is valid we will use that
+
+ printk_debug("EEPROM contents %x \n",ReadEEprom( dev, base, 0LL));
+ for(i=0;i<3;i++) {
+ //status = smbus_read_byte(dev_eeprom, i);
+ ulValue=ReadEEprom( dev, base, i+3L);
+ if (ulValue ==0x10000) break; // error
+
+ MacAddr[i] =ulValue & 0xFFFF;
+
+ }
+
+ }else{
+ // read MAC address from firmware
+ printk_debug("EEPROM invalid!!\nReg 0x38h=%.8lx \n",ulValue);
+ MacAddr[0]=readw(0xffffffc0); // mac address store at here
+ MacAddr[1]=readw(0xffffffc2);
+ MacAddr[2]=readw(0xffffffc4);
+ }
+
+
+#if 0
+// read MAC address from EEPROM at first
+printk_debug("MAC address in firmware trap \n");
+ for( i=0;i<3;i++)
+ printk_debug(" %4x\n",MacAddr[i]);
+ printk_debug("\n");
+#endif
+
+set_apc(dev);
+
+readApcMacAddr();
+
+#if 0
+{
+//device_t dev;
+int i;
+//dev = pci_locate_device(PCI_ID(0x1039, 0x5513), 0);
+printk_debug("NIC PCI config \n");
+for(i=0;i<0xFF;i+=4)
+{ if((i%16)==0)
+ {print_debug("\r\n");print_debug_hex8(i);print_debug(" ");}
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+}
+
+}
+#endif
+
+}
+
+printk_debug("nic_init<--------\r\n");
+return;
+
+#define RegStationMgtInf 0x44
+#define PHY_RGMII 0x10000000
+
+ writel(PHY_RGMII, base + RegStationMgtInf);
+ conf = dev->chip_info;
+
+ if(conf->mac_eeprom_smbus != 0) {
+// read MAC address from EEPROM at first
+
+ struct device *dev_eeprom;
+ dev_eeprom = dev_find_slot_on_smbus(conf->mac_eeprom_smbus, conf->mac_eeprom_addr);
+
+ if(dev_eeprom) {
+ // if that is valid we will use that
+ unsigned char dat[6];
+ int status;
+ int i;
+ for(i=0;i<6;i++) {
+ status = smbus_read_byte(dev_eeprom, i);
+ if(status < 0) break;
+ dat[i] = status & 0xff;
+ }
+ if(status >= 0) {
+ mac_l = 0;
+ for(i=3;i>=0;i--) {
+ mac_l <<= 8;
+ mac_l += dat[i];
+ }
+ if(mac_l != 0xffffffff) {
+ mac_l += nic_index;
+ mac_h = 0;
+ for(i=5;i>=4;i--) {
+ mac_h <<= 8;
+ mac_h += dat[i];
+ }
+ eeprom_valid = 1;
+ }
+ }
+ }
+ }
+// if that is invalid we will read that from romstrap
+ if(!eeprom_valid) {
+ unsigned long mac_pos;
+ mac_pos = 0xffffffd0; // refer to romstrap.inc and romstrap.lds
+ mac_l = readl(mac_pos) + nic_index; // overflow?
+ mac_h = readl(mac_pos + 4);
+
+ }
+#if 1
+// set that into NIC MMIO
+#define NvRegMacAddrA 0xA8
+#define NvRegMacAddrB 0xAC
+ writel(mac_l, base + NvRegMacAddrA);
+ writel(mac_h, base + NvRegMacAddrB);
+#else
+// set that into NIC
+ pci_write_config32(dev, 0xa8, mac_l);
+ pci_write_config32(dev, 0xac, mac_h);
+#endif
+
+ nic_index++;
+
+#if CONFIG_PCI_ROM_RUN == 1
+ pci_dev_init(dev);// it will init option rom
+#endif
+
+}
+
+
+
+#else // orginal code
+
+tatic int phy_read(uint8_t *base, unsigned phy_addr, unsigned phy_reg)
+{
+ uint32_t dword;
+ unsigned loop = 0x100;
+ writel(0x8000, base+0x190); //Clear MDIO lock bit
+ mdelay(1);
+ dword = readl(base+0x190);
+ if(dword & (1<<15)) return -1;
+
+ writel(1, base+0x180);
+ writel((phy_addr<<5) | (phy_reg),base + 0x190);
+ do{
+ dword = readl(base + 0x190);
+ if(--loop==0) return -4;
+ } while ((dword & (1<<15)) );
+
+ dword = readl(base + 0x180);
+ if(dword & 1) return -3;
+
+ dword = readl(base + 0x194);
+
+ return dword;
+
+}
+
+static int phy_detect(uint8_t *base)
+{
+ uint32_t dword;
+ int i;
+ int val;
+ unsigned id;
+ dword = readl(base+0x188);
+ dword &= ~(1<<20);
+ writel(dword, base+0x188);
+
+ phy_read(base, 0, 1);
+
+ for(i=1; i<=32; i++) {
+ int phyaddr = i & 0x1f;
+ val = phy_read(base, phyaddr, 1);
+ if(val<0) continue;
+ if((val & 0xffff) == 0xfffff) continue;
+ if((val & 0xffff) == 0) continue;
+ if(!(val & 1)) {
+ break; // Ethernet PHY
+ }
+ val = phy_read(base, phyaddr, 3);
+ if (val < 0 || val == 0xffff) continue;
+ id = val & 0xfc00;
+ val = phy_read(base, phyaddr, 2);
+ if (val < 0 || val == 0xffff) continue;
+ id |= ((val & 0xffff)<<16);
+ printk_debug("SIS966 MAC PHY ID 0x%08x PHY ADDR %d\n", id, i);
+// if((id == 0xe0180000) || (id==0x0032cc00))
+ break;
+ }
+
+ if(i>32) {
+ printk_debug("SIS966 MAC PHY not found\n");
+ }
+
+}
+static void nic_init(struct device *dev)
+{
+ uint32_t dword, old;
+ uint32_t mac_h, mac_l;
+ int eeprom_valid = 0;
+ struct southbridge_sis_sis966_config *conf;
+
+ static uint32_t nic_index = 0;
+
+ uint8_t *base;
+ struct resource *res;
+
+ res = find_resource(dev, 0x10);
+
+ if(!res) return;
+
+ base = res->base;
+
+ phy_detect(base);
+
+#define NvRegPhyInterface 0xC0
+#define PHY_RGMII 0x10000000
+
+ writel(PHY_RGMII, base + NvRegPhyInterface);
+
+ conf = dev->chip_info;
+
+ if(conf->mac_eeprom_smbus != 0) {
+// read MAC address from EEPROM at first
+ struct device *dev_eeprom;
+ dev_eeprom = dev_find_slot_on_smbus(conf->mac_eeprom_smbus, conf->mac_eeprom_addr);
+
+ if(dev_eeprom) {
+ // if that is valid we will use that
+ unsigned char dat[6];
+ int status;
+ int i;
+ for(i=0;i<6;i++) {
+ status = smbus_read_byte(dev_eeprom, i);
+ if(status < 0) break;
+ dat[i] = status & 0xff;
+ }
+ if(status >= 0) {
+ mac_l = 0;
+ for(i=3;i>=0;i--) {
+ mac_l <<= 8;
+ mac_l += dat[i];
+ }
+ if(mac_l != 0xffffffff) {
+ mac_l += nic_index;
+ mac_h = 0;
+ for(i=5;i>=4;i--) {
+ mac_h <<= 8;
+ mac_h += dat[i];
+ }
+ eeprom_valid = 1;
+ }
+ }
+ }
+ }
+// if that is invalid we will read that from romstrap
+ if(!eeprom_valid) {
+ unsigned long mac_pos;
+ mac_pos = 0xffffffd0; // refer to romstrap.inc and romstrap.lds
+ mac_l = readl(mac_pos) + nic_index; // overflow?
+ mac_h = readl(mac_pos + 4);
+
+ }
+#if 1
+// set that into NIC MMIO
+#define NvRegMacAddrA 0xA8
+#define NvRegMacAddrB 0xAC
+ writel(mac_l, base + NvRegMacAddrA);
+ writel(mac_h, base + NvRegMacAddrB);
+#else
+// set that into NIC
+ pci_write_config32(dev, 0xa8, mac_l);
+ pci_write_config32(dev, 0xac, mac_h);
+#endif
+
+ nic_index++;
+
+#if CONFIG_PCI_ROM_RUN == 1
+ pci_dev_init(dev);// it will init option rom
+#endif
+
+}
+
+#endif
+static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ pci_write_config32(dev, 0x40,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = lpci_set_subsystem,
+};
+
+static struct device_operations nic_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = nic_init,
+ .scan_bus = 0,
+// .enable = sis966_enable,
+ .ops_pci = &lops_pci,
+};
+static struct pci_driver nic_driver __pci_driver = {
+ .ops = &nic_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_NIC1,
+};
+static struct pci_driver nic_bridge_driver __pci_driver = {
+ .ops = &nic_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_NIC_BRIDGE,
+};
diff --git a/src/southbridge/sis/sis966/sis966_pci.c b/src/southbridge/sis/sis966/sis966_pci.c
new file mode 100644
index 0000000000..db1d986a08
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_pci.c
@@ -0,0 +1,109 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sis966.h"
+
+static void pci_init(struct device *dev)
+{
+
+ uint32_t dword;
+ uint16_t word;
+#if CONFIG_PCI_64BIT_PREF_MEM == 1
+ device_t pci_domain_dev;
+ struct resource *mem1, *mem2;
+#endif
+
+ /* System error enable */
+ dword = pci_read_config32(dev, 0x04);
+ dword |= (1<<8); /* System error enable */
+ dword |= (1<<30); /* Clear possible errors */
+ pci_write_config32(dev, 0x04, dword);
+
+#if 1
+ //only need (a01,xx]
+ word = pci_read_config16(dev, 0x48);
+ word |= (1<<0); /* MRL2MRM */
+ word |= (1<<2); /* MR2MRM */
+ pci_write_config16(dev, 0x48, word);
+#endif
+
+#if 1
+ dword = pci_read_config32(dev, 0x4c);
+ dword |= 0x00440000; /*TABORT_SER_ENABLE Park Last Enable.*/
+ pci_write_config32(dev, 0x4c, dword);
+#endif
+
+#if CONFIG_PCI_64BIT_PREF_MEM == 1
+ pci_domain_dev = dev->bus->dev;
+ while(pci_domain_dev) {
+ if(pci_domain_dev->path.type == DEVICE_PATH_PCI_DOMAIN) break;
+ pci_domain_dev = pci_domain_dev->bus->dev;
+ }
+
+ if(!pci_domain_dev) return; // impossiable
+ mem1 = find_resource(pci_domain_dev, 1); // prefmem, it could be 64bit
+ mem2 = find_resource(pci_domain_dev, 2); // mem
+ if(mem1->base > mem2->base) {
+ dword = mem2->base & (0xffff0000UL);
+ printk_debug("PCI DOMAIN mem2 base = 0x%010Lx\n", mem2->base);
+ } else {
+ dword = mem1->base & (0xffff0000UL);
+ printk_debug("PCI DOMAIN mem1 (prefmem) base = 0x%010Lx\n", mem1->base);
+ }
+#else
+ dword = dev_root.resource[1].base & (0xffff0000UL);
+ printk_debug("dev_root mem base = 0x%010Lx\n", dev_root.resource[1].base);
+#endif
+ printk_debug("[0x50] <-- 0x%08x\n", dword);
+ pci_write_config32(dev, 0x50, dword); //TOM
+
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = 0,
+};
+
+static struct device_operations pci_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_bus_enable_resources,
+ .init = pci_init,
+ .scan_bus = pci_scan_bridge,
+// .enable = sis966_enable,
+ .reset_bus = pci_bus_reset,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver pci_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_PCI,
+};
+
diff --git a/src/southbridge/sis/sis966/sis966_pcie.c b/src/southbridge/sis/sis966/sis966_pcie.c
new file mode 100644
index 0000000000..3984554378
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_pcie.c
@@ -0,0 +1,86 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sis966.h"
+
+static void pcie_init(struct device *dev)
+{
+
+ /* Enable pci error detecting */
+ uint32_t dword;
+
+ /* System error enable */
+ dword = pci_read_config32(dev, 0x04);
+ dword |= (1<<8); /* System error enable */
+ dword |= (1<<30); /* Clear possible errors */
+ pci_write_config32(dev, 0x04, dword);
+
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = 0,
+};
+
+static struct device_operations pcie_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_bus_enable_resources,
+ .init = pcie_init,
+ .scan_bus = pci_scan_bridge,
+// .enable = sis966_enable,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver pciebc_driver __pci_driver = {
+ .ops = &pcie_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_PCIE_B_C,
+};
+static struct pci_driver pciee_driver __pci_driver = {
+ .ops = &pcie_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_PCIE_E,
+};
+static struct pci_driver pciea_driver __pci_driver = {
+ .ops = &pcie_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_PCIE_A,
+};
+static struct pci_driver pcief_driver __pci_driver = {
+ .ops = &pcie_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_PCIE_F,
+};
+static struct pci_driver pcied_driver __pci_driver = {
+ .ops = &pcie_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_PCIE_D,
+};
+
diff --git a/src/southbridge/sis/sis966/sis966_reset.c b/src/southbridge/sis/sis966/sis966_reset.c
new file mode 100644
index 0000000000..3c08e79615
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_reset.c
@@ -0,0 +1,59 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+
+#define PCI_DEV(BUS, DEV, FN) ( \
+ (((BUS) & 0xFFF) << 20) | \
+ (((DEV) & 0x1F) << 15) | \
+ (((FN) & 0x7) << 12))
+
+typedef unsigned device_t;
+
+static void pci_write_config32(device_t dev, unsigned where, unsigned value)
+{
+ unsigned addr;
+ addr = (dev>>4) | where;
+ outl(0x80000000 | (addr & ~3), 0xCF8);
+ outl(value, 0xCFC);
+}
+
+static unsigned pci_read_config32(device_t dev, unsigned where)
+{
+ unsigned addr;
+ addr = (dev>>4) | where;
+ outl(0x80000000 | (addr & ~3), 0xCF8);
+ return inl(0xCFC);
+}
+
+#include "../../../northbridge/amd/amdk8/reset_test.c"
+
+void hard_reset(void)
+{
+ set_bios_reset();
+ /* Try rebooting through port 0xcf9 */
+ /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
+ outb((0 <<3)|(0<<2)|(1<<1), 0xcf9);
+ outb((0 <<3)|(1<<2)|(1<<1), 0xcf9);
+}
+
diff --git a/src/southbridge/sis/sis966/sis966_sata.c b/src/southbridge/sis/sis966/sis966_sata.c
new file mode 100644
index 0000000000..c495aa5e45
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_sata.c
@@ -0,0 +1,301 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <delay.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sis966.h"
+#include <arch/io.h>
+
+#if 1
+uint8_t SiS_SiS1183_init[68][3]={
+{0x04, 0x00, 0x05},
+{0x09, 0x00, 0x05},
+{0x2C, 0x00, 0x39},
+{0x2D, 0x00, 0x10},
+{0x2E, 0x00, 0x83},
+{0x2F, 0x00, 0x11},
+{0x90, 0x00, 0x40},
+{0x91, 0x00, 0x00}, // set mode
+{0x50, 0x00, 0xA2},
+{0x52, 0x00, 0xA2},
+{0x55, 0x00, 0x96},
+{0x52, 0x00, 0xA2},
+{0x55, 0xF7, 0x00},
+{0x56, 0x00, 0xC0},
+{0x57, 0x00, 0x14},
+{0x67, 0x00, 0x28},
+{0x81, 0x00, 0xB3},
+{0x82, 0x00, 0x72},
+{0x83, 0x00, 0x40},
+{0x85, 0x00, 0xB3},
+{0x86, 0x00, 0x72},
+{0x87, 0x00, 0x40},
+{0x88, 0x00, 0xDE}, // after set mode
+{0x89, 0x00, 0xB3},
+{0x8A, 0x00, 0x72},
+{0x8B, 0x00, 0x40},
+{0x8C, 0x00, 0xDE},
+{0x8D, 0x00, 0xB3},
+{0x8E, 0x00, 0x92},
+{0x8F, 0x00, 0x40},
+{0x93, 0x00, 0x00},
+{0x94, 0x00, 0x80},
+{0x95, 0x00, 0x08},
+{0x96, 0x00, 0x80},
+{0x97, 0x00, 0x08},
+{0x9C, 0x00, 0x80},
+{0x9D, 0x00, 0x08},
+{0x9E, 0x00, 0x80},
+{0x9F, 0x00, 0x08},
+{0xA0, 0x00, 0x15},
+{0xA1, 0x00, 0x15},
+{0xA2, 0x00, 0x15},
+{0xA3, 0x00, 0x15},
+
+
+{0xD8, 0xFE, 0x01}, // Com reset
+{0xC8, 0xFE, 0x01},
+{0xE8, 0xFE, 0x01},
+{0xF8, 0xFE, 0x01},
+
+{0xD8, 0xFE, 0x00}, // Com reset
+{0xC8, 0xFE, 0x00},
+{0xE8, 0xFE, 0x00},
+{0xF8, 0xFE, 0x00},
+
+
+{0xC4, 0xFF, 0xFF}, // Clear status
+{0xC5, 0xFF, 0xFF},
+{0xC6, 0xFF, 0xFF},
+{0xC7, 0xFF, 0xFF},
+{0xD4, 0xFF, 0xFF},
+{0xD5, 0xFF, 0xFF},
+{0xD6, 0xFF, 0xFF},
+{0xD7, 0xFF, 0xFF},
+{0xE4, 0xFF, 0xFF}, // Clear status
+{0xE5, 0xFF, 0xFF},
+{0xE6, 0xFF, 0xFF},
+{0xE7, 0xFF, 0xFF},
+{0xF4, 0xFF, 0xFF},
+{0xF5, 0xFF, 0xFF},
+{0xF6, 0xFF, 0xFF},
+{0xF7, 0xFF, 0xFF},
+
+{0x00, 0x00, 0x00} //End of table
+};
+
+
+#else
+uint8_t SiS_SiS1183_init[5][3]={
+
+{0xD8, 0xFE, 0x01}, // Com reset
+{0xC8, 0xFE, 0x01},
+{0xE8, 0xFE, 0x01},
+{0xF8, 0xFE, 0x01},
+
+{0x00, 0x00, 0x00}
+}; //End of table
+
+uint8_t SiS_SiS1183_init2[21][3]={
+{0xD8, 0xFE, 0x00},
+{0xC8, 0xFE, 0x00},
+{0xE8, 0xFE, 0x00},
+{0xF8, 0xFE, 0x00},
+
+
+{0xC4, 0xFF, 0xFF}, // Clear status
+{0xC5, 0xFF, 0xFF},
+{0xC6, 0xFF, 0xFF},
+{0xC7, 0xFF, 0xFF},
+{0xD4, 0xFF, 0xFF},
+{0xD5, 0xFF, 0xFF},
+{0xD6, 0xFF, 0xFF},
+{0xD7, 0xFF, 0xFF},
+{0xE4, 0xFF, 0xFF}, // Clear status
+{0xE5, 0xFF, 0xFF},
+{0xE6, 0xFF, 0xFF},
+{0xE7, 0xFF, 0xFF},
+{0xF4, 0xFF, 0xFF},
+{0xF5, 0xFF, 0xFF},
+{0xF6, 0xFF, 0xFF},
+{0xF7, 0xFF, 0xFF},
+
+
+{0x00, 0x00, 0x00} //End of table
+};
+#endif
+
+
+
+static void sata_init(struct device *dev)
+{
+ uint32_t dword;
+ struct southbridge_sis_sis966_config *conf;
+
+
+struct resource *res;
+uint16_t base;
+uint8_t temp8;
+
+ conf = dev->chip_info;
+printk_debug("SATA(SiS1183)_init-------->\r\n");
+
+#if 1
+//-------------- enable IDE (SiS5513) -------------------------
+{
+ uint8_t temp8;
+ int i=0;
+ while(SiS_SiS1183_init[i][0] != 0)
+ { temp8 = pci_read_config8(dev, SiS_SiS1183_init[i][0]);
+ temp8 &= SiS_SiS1183_init[i][1];
+ temp8 |= SiS_SiS1183_init[i][2];
+ pci_write_config8(dev, SiS_SiS1183_init[i][0], temp8);
+ i++;
+ };
+}
+/*
+mdelay(5);
+{
+ uint8_t temp8;
+ int i=0;
+ while(SiS_SiS1183_init2[i][0] != 0)
+ { temp8 = pci_read_config8(dev, SiS_SiS1183_init2[i][0]);
+ temp8 &= SiS_SiS1183_init2[i][1];
+ temp8 |= SiS_SiS1183_init2[i][2];
+ pci_write_config8(dev, SiS_SiS1183_init2[i][0], temp8);
+ i++;
+ };
+}
+*/
+//-----------------------------------------------------------
+#endif
+
+
+#if 0
+
+ dword = pci_read_config32(dev, 0x50);
+ /* Ensure prefetch is disabled */
+ dword &= ~((1 << 15) | (1 << 13));
+ if(conf) {
+ if (conf->sata1_enable) {
+ /* Enable secondary SATA interface */
+ dword |= (1<<0);
+ printk_debug("SATA S \t");
+ }
+ if (conf->sata0_enable) {
+ /* Enable primary SATA interface */
+ dword |= (1<<1);
+ printk_debug("SATA P \n");
+ }
+ } else {
+ dword |= (1<<1) | (1<<0);
+ printk_debug("SATA P and S \n");
+ }
+
+
+#if 1
+ dword &= ~(0x1f<<24);
+ dword |= (0x15<<24);
+#endif
+ pci_write_config32(dev, 0x50, dword);
+
+ dword = pci_read_config32(dev, 0xf8);
+ dword |= 2;
+ pci_write_config32(dev, 0xf8, dword);
+
+#endif
+
+{
+uint32_t i,j;
+uint32_t temp32;
+
+for (i=0;i<10;i++){
+ temp32=0;
+ temp32= pci_read_config32(dev, 0xC0);
+ for ( j=0;j<0xFFFF;j++);
+ printk_debug("status= %x",temp32);
+ if (((temp32&0xF) == 0x3) || ((temp32&0xF) == 0x0)) break;
+}
+printk_debug("\n");
+}
+
+#if 0
+
+res = find_resource(dev, 0x10);
+base =(uint16_t ) res->base;
+printk_debug("BASE ADDR %x\n",base);
+base&=0xFFFE;
+printk_debug("SATA status %x\n",inb(base+7));
+
+{
+int i;
+for(i=0;i<0xFF;i+=4)
+{
+ if((i%16)==0)
+ {
+ print_debug("\r\n");print_debug_hex8(i);print_debug(" ");}
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+ }
+}
+#endif
+printk_debug("sata_init <--------\r\n");
+
+}
+
+static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ pci_write_config32(dev, 0x40,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+static struct pci_operations lops_pci = {
+ .set_subsystem = lpci_set_subsystem,
+};
+
+static struct device_operations sata_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+// .enable = sis966_enable,
+ .init = sata_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver sata0_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_SATA0,
+};
+
+static struct pci_driver sata1_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_SATA1,
+};
diff --git a/src/southbridge/sis/sis966/sis966_smbus.c b/src/southbridge/sis/sis966/sis966_smbus.c
new file mode 100644
index 0000000000..5d1384b440
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_smbus.c
@@ -0,0 +1,154 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <device/smbus.h>
+#include <bitops.h>
+#include <arch/io.h>
+#include "sis966.h"
+#include "sis966_smbus.h"
+
+static int lsmbus_recv_byte(device_t dev)
+{
+ unsigned device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.u.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x20 + (pbus->link * 4));
+
+ return do_smbus_recv_byte(res->base, device);
+}
+
+static int lsmbus_send_byte(device_t dev, uint8_t val)
+{
+ unsigned device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.u.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x20 + (pbus->link * 4));
+
+ return do_smbus_send_byte(res->base, device, val);
+}
+
+static int lsmbus_read_byte(device_t dev, uint8_t address)
+{
+ unsigned device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.u.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x20 + (pbus->link * 4));
+
+ return do_smbus_read_byte(res->base, device, address);
+}
+
+static int lsmbus_write_byte(device_t dev, uint8_t address, uint8_t val)
+{
+ unsigned device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.u.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x20 + (pbus->link * 4));
+
+ return do_smbus_write_byte(res->base, device, address, val);
+}
+static struct smbus_bus_operations lops_smbus_bus = {
+ .recv_byte = lsmbus_recv_byte,
+ .send_byte = lsmbus_send_byte,
+ .read_byte = lsmbus_read_byte,
+ .write_byte = lsmbus_write_byte,
+};
+
+#if HAVE_ACPI_TABLES == 1
+unsigned pm_base;
+#endif
+
+static void sis966_sm_read_resources(device_t dev)
+{
+ struct resource *res;
+ unsigned long index;
+
+ /* Get the normal pci resources of this device */
+ pci_dev_read_resources(dev);
+
+ for (index = 0x60; index <= 0x68; index+=4) { // We got another 3.
+ pci_get_resource(dev, index);
+ }
+ compact_resources(dev);
+
+}
+
+static void sis966_sm_init(device_t dev)
+{
+#if HAVE_ACPI_TABLES == 1
+ struct resource *res;
+
+ res = find_resource(dev, 0x60);
+
+ if (res)
+ pm_base = res->base;
+#endif
+}
+
+static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ pci_write_config32(dev, 0x40,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = lpci_set_subsystem,
+};
+static struct device_operations smbus_ops = {
+ .read_resources = sis966_sm_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sis966_sm_init,
+ .scan_bus = scan_static_bus,
+// .enable = sis966_enable,
+ .ops_pci = &lops_pci,
+ .ops_smbus_bus = &lops_smbus_bus,
+};
+static struct pci_driver smbus_driver __pci_driver = {
+ .ops = &smbus_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_SM2,
+};
+
diff --git a/src/southbridge/sis/sis966/sis966_smbus.h b/src/southbridge/sis/sis966/sis966_smbus.h
new file mode 100644
index 0000000000..cc0e1db686
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_smbus.h
@@ -0,0 +1,202 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/smbus_def.h>
+
+#define SMBHSTSTAT 0x1
+#define SMBHSTPRTCL 0x0
+#define SMBHSTCMD 0x3
+#define SMBXMITADD 0x2
+#define SMBHSTDAT0 0x4
+#define SMBHSTDAT1 0x5
+
+/* Between 1-10 seconds, We should never timeout normally
+ * Longer than this is just painful when a timeout condition occurs.
+ */
+#define SMBUS_TIMEOUT (100*1000*10)
+
+static inline void smbus_delay(void)
+{
+ outb(0x80, 0x80);
+}
+
+static int smbus_wait_until_ready(unsigned smbus_io_base)
+{
+ unsigned long loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ unsigned char val;
+ smbus_delay();
+ val = inb(smbus_io_base + SMBHSTSTAT);
+ val &= 0x1f;
+ if (val == 0) {
+ return 0;
+ }
+ outb(val,smbus_io_base + SMBHSTSTAT);
+ } while(--loops);
+ return -2;
+}
+
+static int smbus_wait_until_done(unsigned smbus_io_base)
+{
+ unsigned long loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ unsigned char val;
+ smbus_delay();
+
+ val = inb(smbus_io_base + 0x00);
+ if ( (val & 0xff) != 0x02) {
+ return 0;
+ }
+ } while(--loops);
+ return -3;
+}
+static int do_smbus_recv_byte(unsigned smbus_io_base, unsigned device)
+{
+ unsigned char global_status_register;
+ unsigned char byte;
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1)|1 , smbus_io_base + SMBXMITADD);
+ smbus_delay();
+
+ /* byte data recv */
+ outb(0x05, smbus_io_base + SMBHSTPRTCL);
+ smbus_delay();
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3;
+ }
+
+ global_status_register = inb(smbus_io_base + SMBHSTSTAT) & 0x80; /* lose check */
+
+ /* read results of transaction */
+ byte = inb(smbus_io_base + SMBHSTCMD);
+
+ if (global_status_register != 0x80) { // lose check, otherwise it should be 0
+ return -1;
+ }
+ return byte;
+}
+static int do_smbus_send_byte(unsigned smbus_io_base, unsigned device, unsigned char val)
+{
+ unsigned global_status_register;
+
+ outb(val, smbus_io_base + SMBHSTDAT0);
+ smbus_delay();
+
+ /* set the command... */
+ outb(val, smbus_io_base + SMBHSTCMD);
+ smbus_delay();
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBXMITADD);
+ smbus_delay();
+
+ /* set up for a byte data write */
+ outb(0x04, smbus_io_base + SMBHSTPRTCL);
+ smbus_delay();
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3;
+ }
+ global_status_register = inb(smbus_io_base + SMBHSTSTAT) & 0x80; /* lose check */;
+
+ if (global_status_register != 0x80) {
+ return -1;
+ }
+ return 0;
+}
+static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address)
+{
+ unsigned char global_status_register;
+ unsigned char byte;
+
+ outb(0xff, smbus_io_base + 0x00);
+ smbus_delay();
+ outb(0x20, smbus_io_base + 0x03);
+ smbus_delay();
+
+ outb(((device & 0x7f) << 1)|1 , smbus_io_base + 0x04);
+ smbus_delay();
+ outb(address & 0xff, smbus_io_base + 0x05);
+ smbus_delay();
+ outb(0x12, smbus_io_base + 0x03);
+ smbus_delay();
+
+int i,j;
+for(i=0;i<0x1000;i++)
+{
+ if (inb(smbus_io_base + 0x00) != 0x08)
+ { smbus_delay();
+ for(j=0;j<0xFFFF;j++);
+ }
+};
+
+ global_status_register = inb(smbus_io_base + 0x00);
+ byte = inb(smbus_io_base + 0x08);
+
+ if (global_status_register != 0x08) { // lose check, otherwise it should be 0
+ print_debug("Fail");print_debug("\r\t");
+ return -1;
+ }
+ print_debug("Success");print_debug("\r\t");
+ return byte;
+}
+
+
+static int do_smbus_write_byte(unsigned smbus_io_base, unsigned device, unsigned address, unsigned char val)
+{
+ unsigned global_status_register;
+
+ outb(val, smbus_io_base + SMBHSTDAT0);
+ smbus_delay();
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBXMITADD);
+ smbus_delay();
+
+ outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+ smbus_delay();
+
+ /* set up for a byte data write */
+ outb(0x06, smbus_io_base + SMBHSTPRTCL);
+ smbus_delay();
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3;
+ }
+ global_status_register = inb(smbus_io_base + SMBHSTSTAT) & 0x80; /* lose check */;
+
+ if (global_status_register != 0x80) {
+ return -1;
+ }
+ return 0;
+}
+
diff --git a/src/southbridge/sis/sis966/sis966_usb.c b/src/southbridge/sis/sis966/sis966_usb.c
new file mode 100644
index 0000000000..0cbb68f664
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_usb.c
@@ -0,0 +1,114 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sis966.h"
+
+// From Y.S.
+// PCI R47h-R44h=0001AD54h
+// PCI R4Bh-R48h=00000271h
+uint8_t SiS_SiS7001_init[15][3]={
+{0x04, 0xFF, 0x07},
+{0x2C, 0xFF, 0x39},
+{0x2D, 0xFF, 0x10},
+{0x2E, 0xFF, 0x01},
+{0x2F, 0xFF, 0x70},
+{0x44, 0x00, 0x54},
+{0x45, 0x00, 0xAD},
+{0x46, 0x00, 0x01},
+{0x47, 0x00, 0x00},
+{0x48, 0x00, 0x71},
+{0x49, 0x00, 0x02},
+{0x4A, 0x00, 0x00},
+{0x4B, 0x00, 0x00},
+{0x04, 0x00, 0x07},
+{0x00, 0x00, 0x00} //End of table
+};
+
+static void usb_init(struct device *dev)
+{
+
+//-------------- enable USB1.1 (SiS7001) -------------------------
+{
+ uint8_t temp8;
+ int i=0;
+
+ printk_debug("USB1.1_Init\n");
+
+ while(SiS_SiS7001_init[i][0] != 0)
+ { temp8 = pci_read_config8(dev, SiS_SiS7001_init[i][0]);
+ temp8 &= SiS_SiS7001_init[i][1];
+ temp8 |= SiS_SiS7001_init[i][2];
+ pci_write_config8(dev, SiS_SiS7001_init[i][0], temp8);
+ i++;
+ };
+}
+//-----------------------------------------------------------
+
+#if 0
+{
+ int i;
+ printk_debug("\nUSB 1.1 PCI config");
+ for(i=0;i<0xFF;i+=4)
+ {
+ if((i%16)==0)
+ {
+ print_debug("\r\n");print_debug_hex8(i);print_debug(": ");}
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+ }
+ print_debug("\r\n");
+ }
+#endif
+
+}
+static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ pci_write_config32(dev, 0x40,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+static struct pci_operations lops_pci = {
+ .set_subsystem = lpci_set_subsystem,
+};
+
+static struct device_operations usb_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = usb_init,
+// .enable = sis966_enable,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver usb_driver __pci_driver = {
+ .ops = &usb_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_USB,
+};
diff --git a/src/southbridge/sis/sis966/sis966_usb2.c b/src/southbridge/sis/sis966/sis966_usb2.c
new file mode 100644
index 0000000000..afd31af198
--- /dev/null
+++ b/src/southbridge/sis/sis966/sis966_usb2.c
@@ -0,0 +1,168 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2004 Tyan Computer
+ * Written by Yinghai Lu <yhlu@tyan.com> for Tyan Computer.
+ * Copyright (C) 2006,2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include "sis966.h"
+#if CONFIG_USBDEBUG_DIRECT
+#include <usbdebug_direct.h>
+#endif
+
+extern struct ehci_debug_info dbg_info;
+
+// From Y.S.
+// PCI R43h-R40h=00000020h
+// PCI R4Bh-R48h=00078010h
+uint8_t SiS_SiS7002_init[19][3]={
+{0x04, 0x00, 0x06},
+
+{0x2C, 0xFF, 0x39},
+{0x2D, 0xFF, 0x10},
+{0x2E, 0xFF, 0x02},
+{0x2F, 0xFF, 0x70},
+
+{0x74, 0x00, 0x00},
+{0x75, 0x00, 0x00},
+{0x76, 0x00, 0x00},
+{0x77, 0x00, 0x00},
+
+{0x40, 0x00, 0x20},
+{0x41, 0x00, 0x00},
+{0x42, 0x00, 0x00},
+{0x43, 0x00, 0x08},
+
+{0x44, 0x00, 0x64},
+
+{0x48, 0x00, 0x10},
+{0x49, 0x00, 0x80},
+{0x4A, 0x00, 0x07},
+{0x4B, 0x00, 0x00},
+
+{0x00, 0x00, 0x00} //End of table
+};
+
+
+
+static void usb2_init(struct device *dev)
+{
+ uint8_t *base;
+ struct resource *res;
+ uint32_t temp32;
+
+
+//-------------- enable USB2.0 (SiS7002) -------------------------
+{
+ uint8_t temp8;
+ int i=0;
+
+ printk_debug("USB2.0_Init\n");
+
+ while(SiS_SiS7002_init[i][0] != 0)
+ { temp8 = pci_read_config8(dev, SiS_SiS7002_init[i][0]);
+ temp8 &= SiS_SiS7002_init[i][1];
+ temp8 |= SiS_SiS7002_init[i][2];
+ pci_write_config8(dev, SiS_SiS7002_init[i][0], temp8);
+ i++;
+ };
+}
+
+ res = find_resource(dev, 0x10);
+ if(!res)
+ return;
+
+ base =(uint8_t *) res->base;
+ printk_debug("base = %08x\n", base);
+ writel(0x2,base+0x20);
+//-----------------------------------------------------------
+
+#if 0
+{
+ int i;
+ printk_debug("\nUSB 2.0 PCI config");
+ for(i=0;i<0xFF;i+=4)
+ {
+ if((i%16)==0)
+ {
+ print_debug("\r\n");print_debug_hex8(i);print_debug(": ");}
+ print_debug_hex32(pci_read_config32(dev,i));
+ print_debug(" ");
+ }
+ print_debug("\r\n");
+ }
+#endif
+
+}
+
+static void usb2_set_resources(struct device *dev)
+{
+#if CONFIG_USBDEBUG_DIRECT
+ struct resource *res;
+ unsigned base;
+ unsigned old_debug;
+
+ old_debug = get_ehci_debug();
+ set_ehci_debug(0);
+#endif
+ pci_dev_set_resources(dev);
+
+#if CONFIG_USBDEBUG_DIRECT
+ res = find_resource(dev, 0x10);
+ set_ehci_debug(old_debug);
+ if (!res) return;
+ base = res->base;
+ set_ehci_base(base);
+ report_resource_stored(dev, res, "");
+#endif
+
+}
+
+static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ pci_write_config32(dev, 0x40,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+static struct pci_operations lops_pci = {
+ .set_subsystem = lpci_set_subsystem,
+};
+
+static struct device_operations usb2_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = usb2_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = usb2_init,
+// .enable = sis966_enable,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver usb2_driver __pci_driver = {
+ .ops = &usb2_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS966_EHCI,
+};
diff --git a/src/southbridge/sis/sis966/sisnb.c b/src/southbridge/sis/sis966/sisnb.c
new file mode 100644
index 0000000000..c1aa7b3011
--- /dev/null
+++ b/src/southbridge/sis/sis966/sisnb.c
@@ -0,0 +1,192 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Turn off machine check triggers when reading
+ * pci space where there are no devices.
+ * This is necessary when scaning the bus for
+ * devices which is done by the kernel
+ *
+ * written in 2003 by Eric Biederman
+ *
+ * - Athlon64 workarounds by Stefan Reinauer
+ * - "reset once" logic by Yinghai Lu
+ * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
+ * Written by Morgan Tsai <my_tsai@sis.com> for SiS.
+ *
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <part/hard_reset.h>
+#include <pc80/mc146818rtc.h>
+#include <bitops.h>
+#include <cpu/amd/model_fxx_rev.h>
+
+//#include "amdk8.h"
+
+#include <arch/io.h>
+
+/**
+ * @brief Read resources for AGP aperture
+ *
+ * @param
+ *
+ * There is only one AGP aperture resource needed. The resoruce is added to
+ * the northbridge of BSP.
+ *
+ * The same trick can be used to augment legacy VGA resources which can
+ * be detect by generic pci reousrce allocator for VGA devices.
+ * BAD: it is more tricky than I think, the resource allocation code is
+ * implemented in a way to NOT DOING legacy VGA resource allcation on
+ * purpose :-(.
+ */
+
+
+typedef struct msr_struct
+{
+ unsigned lo;
+ unsigned hi;
+} msr_t;
+
+static inline msr_t rdmsr(unsigned index)
+{
+ msr_t result;
+ result.lo = 0;
+ result.hi = 0;
+ return result;
+}
+
+
+
+static void sisnb_read_resources(device_t dev)
+{
+ struct resource *resource;
+ unsigned char iommu;
+ /* Read the generic PCI resources */
+ printk_debug("sisnb_read_resources\n");
+ pci_dev_read_resources(dev);
+
+ /* If we are not the first processor don't allocate the gart apeture */
+ if (dev->path.u.pci.devfn != PCI_DEVFN(0x0, 0)) {
+ return;
+ }
+
+
+ return;
+
+ iommu = 1;
+ get_option(&iommu, "iommu");
+
+ if (iommu) {
+ /* Add a Gart apeture resource */
+ resource = new_resource(dev, 0x94);
+ resource->size = iommu?AGP_APERTURE_SIZE:1;
+ resource->align = log2(resource->size);
+ resource->gran = log2(resource->size);
+ resource->limit = 0xffffffff; /* 4G */
+ resource->flags = IORESOURCE_MEM;
+ }
+}
+
+static void set_agp_aperture(device_t dev)
+{
+ struct resource *resource;
+
+ return;
+
+ resource = probe_resource(dev, 0x94);
+ if (resource) {
+ device_t pdev;
+ uint32_t gart_base, gart_acr;
+
+ /* Remember this resource has been stored */
+ resource->flags |= IORESOURCE_STORED;
+
+ /* Find the size of the GART aperture */
+ gart_acr = (0<<6)|(0<<5)|(0<<4)|((resource->gran - 25) << 1)|(0<<0);
+
+ /* Get the base address */
+ gart_base = ((resource->base) >> 25) & 0x00007fff;
+
+ /* Update the other northbriges */
+ pdev = 0;
+ while((pdev = dev_find_device(PCI_VENDOR_ID_AMD, 0x1103, pdev))) {
+ /* Store the GART size but don't enable it */
+ pci_write_config32(pdev, 0x90, gart_acr);
+
+ /* Store the GART base address */
+ pci_write_config32(pdev, 0x94, gart_base);
+
+ /* Don't set the GART Table base address */
+ pci_write_config32(pdev, 0x98, 0);
+
+ /* Report the resource has been stored... */
+ report_resource_stored(pdev, resource, " <gart>");
+ }
+ }
+}
+
+static void sisnb_set_resources(device_t dev)
+{
+printk_debug("sisnb_set_resources ------->\n");
+ /* Set the gart apeture */
+// set_agp_aperture(dev);
+
+ /* Set the generic PCI resources */
+ pci_dev_set_resources(dev);
+ printk_debug("sisnb_set_resources <-------\n");
+}
+
+static void sisnb_init(struct device *dev)
+{
+ uint32_t cmd, cmd_ref;
+ int needs_reset;
+ struct device *f0_dev, *f2_dev;
+ msr_t msr;
+
+
+ needs_reset = 0;
+ printk_debug("sisnb_init: ---------->\n");
+
+ //dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_SIS, PCI_DEVICE_ID_SIS_SIS756), 0);
+ msr = rdmsr(0xC001001A);
+ pci_write_config16(dev, 0x8E, msr.lo >> 16); // Topbound
+ pci_write_config8(dev, 0x7F, 0x08); // ACPI Base
+ outb(inb(0x856) | 0x40, 0x856); // Auto-Reset Function
+
+ printk_debug("sisnb_init: <----------\n");
+ printk_debug("done.\n");
+}
+
+
+static struct device_operations sisnb_ops = {
+ .read_resources = sisnb_read_resources,
+ .set_resources = sisnb_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sisnb_init,
+ .scan_bus = 0,
+ .ops_pci = 0,
+};
+
+static struct pci_driver sisnb_driver __pci_driver = {
+ .ops = &sisnb_ops,
+ .vendor = PCI_VENDOR_ID_SIS,
+ .device = PCI_DEVICE_ID_SIS_SIS761,
+};
diff --git a/targets/sis/churchill/Config.lb b/targets/sis/churchill/Config.lb
new file mode 100644
index 0000000000..863cc89c55
--- /dev/null
+++ b/targets/sis/churchill/Config.lb
@@ -0,0 +1,117 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 AMD
+## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+target churchill
+mainboard sis/sis761
+
+# serengeti_leopard
+
+romimage "normal"
+# 48K for VGA BIOS
+ option ROM_SIZE = 475136
+# 48K for SCSI FW and 48K for ATI ROM
+# option ROM_SIZE = 425984
+# 64K for Etherboot
+# option ROM_SIZE = 458752
+# 44k for atixx.rom
+# option ROM_SIZE = 479232
+# 32k for vbios
+# option ROM_SIZE = 491520
+
+ option USE_FAILOVER_IMAGE=0
+# option ROM_IMAGE_SIZE=0x13800
+# option ROM_IMAGE_SIZE=0x18800
+# option ROM_IMAGE_SIZE=0x19800
+ option ROM_IMAGE_SIZE=0x20000
+# option ROM_IMAGE_SIZE=0x15800
+ option XIP_ROM_SIZE=0x40000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+# payload ../../../payloads/tg3--ide_disk.zelf
+# payload ../../../payloads/filo.elf
+# payload ../../../../payloads/filo.elf
+# payload ../../../../payloads/filo_hdc1.elf
+ payload ../../../../payloads/filo_uda1.elf
+# payload ../../../payloads/filo_mem.elf
+# payload ../../../payloads/filo.zelf
+# payload ../../../payloads/tg3--filo_hda2.zelf
+# payload ../../../payloads/tg3.zelf
+# payload ../../../../payloads/tg3_vga.zelf
+# payload ../../../../payloads/tg3--filo_hda2_vga.zelf
+# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
+# payload ../../../../payloads/forcedeth--filo_hda2_vga.zelf
+# payload ../../../../payloads/forcedeth--filo_hda2_vga_5_4_2_mcp55.zelf
+# payload /etc/hosts
+# payload ../../../payloads/tg3_com2.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
+# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
+# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
+end
+
+romimage "fallback"
+ option USE_FAILOVER_IMAGE=0
+ option USE_FALLBACK_IMAGE=1
+# option ROM_IMAGE_SIZE=0x13800
+# option ROM_IMAGE_SIZE=0x18800
+# option ROM_IMAGE_SIZE=0x19800
+ option ROM_IMAGE_SIZE=0x20000
+# option ROM_IMAGE_SIZE=0x15800
+ option XIP_ROM_SIZE=0x40000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+# payload ../../../payloads/tg3--ide_disk.zelf
+# payload ../../../payloads/filo.elf
+# payload ../../../payloads/filo_mem.elf
+# payload ../../../payloads/filo.zelf
+# payload ../../../../payloads/filo.elf
+# payload ../../../../payloads/filo_hdc1.elf
+ payload ../../../../payloads/filo_uda1.elf
+# payload ../../../payloads/tg3--filo_hda2.zelf
+# payload ../../../payloads/tg3.zelf
+# payload ../../../../payloads/tg3_vga.zelf
+# payload ../../../../payloads/memtest
+# payload ../../../../payloads/e1000_vga.zelf
+# payload ../../../../payloads/tg3--filo_hda2_vga.zelf
+# payload ../../../../payloads/filo_hda.zelf
+# payload ../../../../payloads/adlo.elf
+# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
+# payload ../../../../payloads/forcedeth_mcp55_filo_hda2.zelf
+# payload ../../../../payloads/forcedeth--filo_hda2_vga_5_4_2_mcp55.zelf
+# payload /etc/hosts
+# payload ../../../../payloads/forcedeth--filo_hda2_vga.zelf
+# payload ../../../payloads/tg3_com2.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
+# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
+# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
+end
+
+romimage "failover"
+ option USE_FAILOVER_IMAGE=1
+ option USE_FALLBACK_IMAGE=0
+ option ROM_IMAGE_SIZE=FAILOVER_SIZE
+ option XIP_ROM_SIZE=FAILOVER_SIZE
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover"
+end
+
+# buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
+ buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" "failover"
diff --git a/targets/sis/churchill/README b/targets/sis/churchill/README
new file mode 100644
index 0000000000..351d743041
--- /dev/null
+++ b/targets/sis/churchill/README
@@ -0,0 +1,3 @@
+## How to append VGA bios?
+
+cat 6330VGA.rom churchill/linuxbios.rom > churchill.bin
diff --git a/targets/sis/churchill/VERSION b/targets/sis/churchill/VERSION
new file mode 100644
index 0000000000..8775da4b7a
--- /dev/null
+++ b/targets/sis/churchill/VERSION
@@ -0,0 +1 @@
+_churchill