diff options
| -rw-r--r-- | src/ec/google/wilco/commands.c | 99 | ||||
| -rw-r--r-- | src/ec/google/wilco/commands.h | 142 |
2 files changed, 241 insertions, 0 deletions
diff --git a/src/ec/google/wilco/commands.c b/src/ec/google/wilco/commands.c index 9ea8936e10..1767a01aee 100644 --- a/src/ec/google/wilco/commands.c +++ b/src/ec/google/wilco/commands.c @@ -50,3 +50,102 @@ void wilco_ec_print_all_info(void) if (!wilco_ec_get_info(GET_EC_BUILD_DATE, info)) printk(BIOS_INFO, "EC Build Date : %s\n", info); } + +static int wilco_ec_get_power_smi(struct ec_pm_event_state *pm) +{ + struct ec_response_power_smi { + uint8_t pm_event_1; + uint8_t pm_state_1; + uint8_t hotkey; + uint8_t pm_state_2; + uint8_t pm_state_3; + uint8_t pm_state_4; + uint8_t pm_state_5; + uint8_t pm_event_2; + uint8_t pm_state_6; + } __packed rsp; + + if (!pm) + return -1; + if (wilco_ec_sendrecv_noargs(KB_POWER_SMI, &rsp, sizeof(rsp)) < 0) + return -1; + + pm->event[0] = rsp.pm_event_1; + pm->event[1] = rsp.pm_event_2; + pm->state[0] = rsp.pm_state_1; + pm->state[1] = rsp.pm_state_2; + pm->state[2] = rsp.pm_state_3; + pm->state[3] = rsp.pm_state_4; + pm->state[4] = rsp.pm_state_5; + pm->state[5] = rsp.pm_state_6; + pm->hotkey = rsp.hotkey; + + return 0; +} + +static int wilco_ec_get_power_status(struct ec_pm_event_state *pm) +{ + struct ec_response_power_status { + uint8_t pm_state_1; + uint8_t pm_state_2; + uint8_t pm_state_3; + uint8_t pm_state_4; + uint8_t pm_state_5; + uint8_t ac_type_lsb; + uint8_t pm_state_6; + uint8_t pm_event_2; + uint8_t ac_type_msb; + } __packed rsp; + + if (!pm) + return -1; + if (wilco_ec_sendrecv_noargs(KB_POWER_STATUS, &rsp, sizeof(rsp)) < 0) + return -1; + + pm->hotkey = 0; + pm->event[0] = 0; + pm->event[1] = rsp.pm_event_2; + pm->state[0] = rsp.pm_state_1; + pm->state[1] = rsp.pm_state_2; + pm->state[2] = rsp.pm_state_3; + pm->state[3] = rsp.pm_state_4; + pm->state[4] = rsp.pm_state_5; + pm->state[5] = rsp.pm_state_6; + pm->ac_type = rsp.ac_type_msb << 8 | rsp.ac_type_lsb; + + return 0; +} + +int wilco_ec_get_pm(struct ec_pm_event_state *pm, bool clear) +{ + if (clear) + return wilco_ec_get_power_smi(pm); + else + return wilco_ec_get_power_status(pm); +} + +int wilco_ec_get_lid_state(void) +{ + struct ec_pm_event_state pm; + + if (wilco_ec_get_power_status(&pm) < 0) + return -1; + + return !!(pm.state[0] & EC_PM1_LID_OPEN); +} + +void wilco_ec_slp_en(void) +{ + /* EC does not respond to this command */ + if (wilco_ec_mailbox(WILCO_EC_MSG_NO_RESPONSE, + KB_SLP_EN, NULL, 0, NULL, 0) < 0) + printk(BIOS_ERR, "%s: command failed\n", __func__); +} + +void wilco_ec_power_off(enum ec_power_off_reason reason) +{ + /* EC does not respond to this command */ + if (wilco_ec_mailbox(WILCO_EC_MSG_NO_RESPONSE, + KB_POWER_OFF, &reason, 1, NULL, 0) < 0) + printk(BIOS_ERR, "%s: command failed\n", __func__); +} diff --git a/src/ec/google/wilco/commands.h b/src/ec/google/wilco/commands.h index dff86aa1d0..492900d557 100644 --- a/src/ec/google/wilco/commands.h +++ b/src/ec/google/wilco/commands.h @@ -17,14 +17,23 @@ #define EC_GOOGLE_WILCO_COMMANDS_H #include <stdint.h> +#include <types.h> enum { + /* Read and clear power state information */ + KB_POWER_SMI = 0x04, + /* Read but do not clear power state information */ + KB_POWER_STATUS = 0x05, + /* Inform the EC aboout the reason host is turning off */ + KB_POWER_OFF = 0x08, /* Retrieve information about the EC */ KB_EC_INFO = 0x38, /* Set ACPI mode on or off */ KB_ACPI = 0x3a, /* Manage the EC power button passthru to the host */ KB_POWER_BUTTON_TO_HOST = 0x3e, + /* Inform the EC that the host is about to enter S3 */ + KB_SLP_EN = 0x64, }; enum set_acpi_mode_cmd { @@ -74,4 +83,137 @@ int wilco_ec_get_info(enum get_ec_info_cmd cmd, char *info); */ void wilco_ec_print_all_info(void); +/* + * EC Power State + */ + +enum ec_power_off_reason { + EC_PWROFF_FLASH = 0x11, + EC_PWROFF_AC_REMOVED = 0x12, + EC_PWROFF_BAT_REMOVED = 0x13, + EC_PWROFF_LOBAT = 0x15, + EC_PWROFF_PWRB_IN_POST = 0x16, + EC_PWROFF_FORCE_IMMEDIATE = 0x18, + EC_PWROFF_WDT = 0x1b, + EC_PWROFF_FORCE_THERMAL = 0x22, + EC_PWROFF_ERR_CODE = 0x23, + EC_PWROFF_PAID_PWRGD = 0x27, + EC_PWROFF_PAID_CPU = 0x28, + EC_PWROFF_PAID_GFX = 0x29, + EC_PWROFF_PAID_CLK = 0x2a, + EC_PWROFF_PAID_NOMEMORY = 0x2b, + EC_PWROFF_PAID_MEMORY_ERR = 0x2c, + EC_PWROFF_PAID_MEMORY_SPD = 0x2d, + EC_SWOFF_ACPI = 0x31, + EC_SWOFF_BOOT_PASSWORD = 0x33, + EC_SWOFF_DISK_PASSWORD = 0x34, + EC_SWOFF_POWER_CYCLE = 0x37, + EC_SWOFF_HARD_RESET = 0x3b, + EC_SWOFF_FSMI = 0x3f, + EC_PWRLOG_THERMTRIP = 0x41, + EC_PWRLOG_NO_S5 = 0x42, + EC_PWROFF_4S_PWRB = 0x44, + EC_PWROFF_ASF2_FORCEOFF = 0x45, + EC_PWROFF_PWRB_THERMAL = 0x48, + EC_PWROFF_AOAC_TIMER = 0x4b, +}; + +/** + * wilco_ec_power_off + * + * Tell the EC why the host is about to power off. +*/ +void wilco_ec_power_off(enum ec_power_off_reason reason); + +/** + * wilco_ec_slp_en + * + * Tell the EC that the host is entering a sleep state. + */ +void wilco_ec_slp_en(void); + +enum ec_pm1_state { + EC_PM1_AC_AVAIL = BIT(0), /* AC available */ + EC_PM1_BAT_AVAIL = BIT(1), /* Battery available */ + EC_PM1_LO_BAT1 = BIT(2), /* Battery 1 low */ + EC_PM1_LO_BAT2 = BIT(3), /* Battery 2 low */ + EC_PM1_LID_OPEN = BIT(4), /* Lid is open */ + EC_PM1_LCD_POWER = BIT(5), /* LCD is powered */ + EC_PM1_OVER_TEMP = BIT(6), /* CPU is over temperature */ + EC_PM1_DOCKED = BIT(7), /* System is docked */ +}; + +enum ec_pm2_state { + EC_PM2_SYS_MB_PCIE = BIT(0), /* MB has PCIe */ + EC_PM2_SYS_MB_SATA = BIT(1), /* MB has SATA */ + EC_PM2_PWRB_PRESSED = BIT(2), /* Power button is pressed */ + EC_PM2_TURBO_MODE = BIT(3), /* Turbo mode */ +}; + +enum ec_pm3_state { + EC_PM3_BAT1_PRES = BIT(2), /* Battery 1 is present */ + EC_PM3_BAT2_PRES = BIT(3), /* Battery 2 is present */ + EC_PM3_LOWER_PSTATE = BIT(6), /* EC requests lower P-state */ + EC_PM3_CPU_THROTTLE = BIT(7), /* EC requests CPU throttle */ +}; + +enum ec_pm4_state { + EC_PM4_BAT1_CHG = BIT(0), /* Battery 1 is being charged */ + EC_PM4_BAT2_CHG = BIT(1), /* Battery 2 is being charged */ + EC_PM4_BAT1_PWR = BIT(2), /* Battery 1 is powering the system */ + EC_PM4_BAT2_PWR = BIT(3), /* Battery 2 is powering the system */ + EC_PM4_PANEL_STATE = BIT(5), /* Panel power state */ +}; + +enum ec_pm5_state { + EC_PM5_INT_HD_SATA = BIT(7), /* Internal SATA HDD */ +}; + +enum ec_pm6_state { + EC_PM6_WLAN_SWITCH = BIT(0), /* Wireless switch */ + EC_PM6_SYS_MB_MODEM = BIT(1), /* MB has modem */ + EC_PM6_ETH_STATE = BIT(2), /* Ethernet cable state */ + EC_PM6_AC_UPDATE = BIT(3), /* Update AC information */ +}; + +enum ec_pm1_event { + EC_EV1_PWRB_PRESSED = BIT(0), /* Power button was pressed */ + EC_EV1_HOTKEY_PRESSED = BIT(1), /* Hotkey was pressed */ + EC_EV1_STATE_CHANGED = BIT(2), /* PMx state changed */ +}; + +enum ec_pm2_event { + EC_EV2_ACPI_MONSWITCH = BIT(0), /* Monitor switch status */ +}; + +struct ec_pm_event_state { + uint8_t event[2]; /* ec_pm{1,2}_event */ + uint8_t state[6]; /* ec_pm{1,2,3,4,5,6}_state */ + uint8_t hotkey; /* Hotkey, if pressed */ + uint16_t ac_type; /* AC adapter information */ +}; + +/** + * wilco_ec_get_pm + * + * Retrieve power and event information from the EC. + * + * @pm: Power event state structure to fill out + * @clear: Clear EC event state after reading + * + * Returns 0 if EC command was successful + * Returns -1 if EC command failed + */ +int wilco_ec_get_pm(struct ec_pm_event_state *pm, bool clear); + +/** + * wilco_ec_get_lid_state + * + * Retrieve the lid state without clearing it in the EC. + * + * Returns 1 if the lid is open, 0 if it is closed + * Returns -1 if the EC command failed + */ +int wilco_ec_get_lid_state(void); + #endif /* EC_GOOGLE_WILCO_COMMANDS_H */ |