summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/advansus/a785e-i/Kconfig1
-rw-r--r--src/mainboard/advansus/a785e-i/Makefile.inc2
-rw-r--r--src/mainboard/advansus/a785e-i/reset.c65
-rw-r--r--src/mainboard/amd/dinar/Kconfig1
-rw-r--r--src/mainboard/amd/dinar/Makefile.inc1
-rw-r--r--src/mainboard/amd/dinar/reset.c67
-rw-r--r--src/mainboard/amd/inagua/Kconfig1
-rw-r--r--src/mainboard/amd/inagua/Makefile.inc1
-rw-r--r--src/mainboard/amd/inagua/reset.c67
-rw-r--r--src/mainboard/amd/parmer/Kconfig1
-rw-r--r--src/mainboard/amd/persimmon/Kconfig1
-rw-r--r--src/mainboard/amd/persimmon/Makefile.inc1
-rw-r--r--src/mainboard/amd/persimmon/reset.c67
-rw-r--r--src/mainboard/amd/south_station/Kconfig1
-rw-r--r--src/mainboard/amd/south_station/Makefile.inc1
-rw-r--r--src/mainboard/amd/south_station/reset.c67
-rw-r--r--src/mainboard/amd/thatcher/Kconfig1
-rw-r--r--src/mainboard/amd/torpedo/Kconfig1
-rw-r--r--src/mainboard/amd/torpedo/Makefile.inc1
-rw-r--r--src/mainboard/amd/torpedo/reset.c67
-rw-r--r--src/mainboard/amd/union_station/Kconfig1
-rw-r--r--src/mainboard/amd/union_station/Makefile.inc1
-rw-r--r--src/mainboard/amd/union_station/reset.c67
-rw-r--r--src/mainboard/asrock/e350m1/Kconfig1
-rw-r--r--src/mainboard/asrock/e350m1/Makefile.inc1
-rw-r--r--src/mainboard/asrock/e350m1/reset.c67
-rw-r--r--src/mainboard/asus/f2a85-m/Kconfig1
-rw-r--r--src/mainboard/asus/m5a88-v/Kconfig1
-rw-r--r--src/mainboard/asus/m5a88-v/Makefile.inc2
-rw-r--r--src/mainboard/asus/m5a88-v/reset.c65
-rw-r--r--src/mainboard/avalue/eax-785e/Kconfig1
-rw-r--r--src/mainboard/avalue/eax-785e/Makefile.inc2
-rw-r--r--src/mainboard/avalue/eax-785e/reset.c65
-rw-r--r--src/mainboard/lippert/frontrunner-af/Kconfig1
-rw-r--r--src/mainboard/lippert/frontrunner-af/Makefile.inc1
-rw-r--r--src/mainboard/lippert/frontrunner-af/reset.c67
-rw-r--r--src/mainboard/lippert/toucan-af/Kconfig1
-rw-r--r--src/mainboard/lippert/toucan-af/Makefile.inc1
-rw-r--r--src/mainboard/lippert/toucan-af/reset.c67
-rw-r--r--src/mainboard/supermicro/h8qgi/Kconfig1
-rw-r--r--src/mainboard/supermicro/h8qgi/Makefile.inc2
-rw-r--r--src/mainboard/supermicro/h8scm/Kconfig1
-rw-r--r--src/mainboard/supermicro/h8scm/Makefile.inc2
-rw-r--r--src/mainboard/tyan/s8226/Kconfig1
-rw-r--r--src/mainboard/tyan/s8226/Makefile.inc2
-rw-r--r--src/southbridge/amd/agesa/hudson/Kconfig1
-rw-r--r--src/southbridge/amd/cimx/sb700/Kconfig1
-rw-r--r--src/southbridge/amd/cimx/sb700/Makefile.inc2
-rw-r--r--src/southbridge/amd/cimx/sb700/reset.c (renamed from src/mainboard/supermicro/h8qgi/reset.c)0
-rw-r--r--src/southbridge/amd/cimx/sb800/Kconfig1
-rw-r--r--src/southbridge/amd/cimx/sb800/Makefile.inc2
-rw-r--r--src/southbridge/amd/cimx/sb800/reset.c (renamed from src/mainboard/supermicro/h8scm/reset.c)0
-rwxr-xr-xsrc/southbridge/amd/cimx/sb900/Kconfig1
-rwxr-xr-xsrc/southbridge/amd/cimx/sb900/Makefile.inc2
-rw-r--r--src/southbridge/amd/cimx/sb900/reset.c (renamed from src/mainboard/tyan/s8226/reset.c)0
55 files changed, 10 insertions, 837 deletions
diff --git a/src/mainboard/advansus/a785e-i/Kconfig b/src/mainboard/advansus/a785e-i/Kconfig
index 3753df8eff..fdf08aae3f 100644
--- a/src/mainboard/advansus/a785e-i/Kconfig
+++ b/src/mainboard/advansus/a785e-i/Kconfig
@@ -15,7 +15,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select SB_SUPERIO_HWM
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/advansus/a785e-i/Makefile.inc b/src/mainboard/advansus/a785e-i/Makefile.inc
index d7290afedd..924f9d6a53 100644
--- a/src/mainboard/advansus/a785e-i/Makefile.inc
+++ b/src/mainboard/advansus/a785e-i/Makefile.inc
@@ -1,5 +1,3 @@
-romstage-y += reset.c
-ramstage-y += reset.c
#SB800 CIMx share AGESA V5 lib code
ifneq ($(CONFIG_CPU_AMD_AGESA),y)
diff --git a/src/mainboard/advansus/a785e-i/reset.c b/src/mainboard/advansus/a785e-i/reset.c
deleted file mode 100644
index 678bc3d267..0000000000
--- a/src/mainboard/advansus/a785e-i/reset.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PRE_RAM__
-#define __PRE_RAM__ // Use simple device model for this file even in ramstage
-#endif
-#include <arch/io.h>
-#include <reset.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes, htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for (i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
diff --git a/src/mainboard/amd/dinar/Kconfig b/src/mainboard/amd/dinar/Kconfig
index 48c1e742c4..3bb225772e 100644
--- a/src/mainboard/amd/dinar/Kconfig
+++ b/src/mainboard/amd/dinar/Kconfig
@@ -36,7 +36,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
- select HAVE_HARD_RESET
select HAVE_ACPI_TABLES
#TODO select HAVE_ACPI_RESUME
select ENABLE_APIC_EXT_ID
diff --git a/src/mainboard/amd/dinar/Makefile.inc b/src/mainboard/amd/dinar/Makefile.inc
index 42f458b215..8dfe21d499 100644
--- a/src/mainboard/amd/dinar/Makefile.inc
+++ b/src/mainboard/amd/dinar/Makefile.inc
@@ -29,7 +29,6 @@ ramstage-y += BiosCallOuts.c
ramstage-y += sb700_cfg.c
ramstage-y += rd890_cfg.c
-ramstage-y += reset.c
AGESA_PREFIX ?= $(src)/vendorcode/amd/agesa
AGESA_ROOT ?= $(AGESA_PREFIX)/$(if $(CONFIG_CPU_AMD_AGESA_FAMILY15),f15,\
diff --git a/src/mainboard/amd/dinar/reset.c b/src/mainboard/amd/dinar/reset.c
deleted file mode 100644
index f2a2bcdadc..0000000000
--- a/src/mainboard/amd/dinar/reset.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PRE_RAM__
-#define __PRE_RAM__ // Use simple device model for this file even in ramstage
-#endif
-#include <arch/io.h>
-#include <reset.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes;
- u32 htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for(i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
-
diff --git a/src/mainboard/amd/inagua/Kconfig b/src/mainboard/amd/inagua/Kconfig
index 3c1431efc0..1d8128ec6a 100644
--- a/src/mainboard/amd/inagua/Kconfig
+++ b/src/mainboard/amd/inagua/Kconfig
@@ -30,7 +30,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/amd/inagua/Makefile.inc b/src/mainboard/amd/inagua/Makefile.inc
index b84a03a38b..f5c52f0d2b 100644
--- a/src/mainboard/amd/inagua/Makefile.inc
+++ b/src/mainboard/amd/inagua/Makefile.inc
@@ -34,5 +34,4 @@ ramstage-y += agesawrapper.c
ramstage-y += BiosCallOuts.c
ramstage-y += PlatformGnbPcie.c
-ramstage-y += reset.c
ramstage-y += broadcom.c
diff --git a/src/mainboard/amd/inagua/reset.c b/src/mainboard/amd/inagua/reset.c
deleted file mode 100644
index bb2482b57b..0000000000
--- a/src/mainboard/amd/inagua/reset.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PRE_RAM__
-#define __PRE_RAM__ // Use simple device model for this file even in ramstage
-#endif
-#include <arch/io.h>
-#include <reset.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes;
- u32 htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for(i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
-
diff --git a/src/mainboard/amd/parmer/Kconfig b/src/mainboard/amd/parmer/Kconfig
index 678432b439..8dd457b9f7 100644
--- a/src/mainboard/amd/parmer/Kconfig
+++ b/src/mainboard/amd/parmer/Kconfig
@@ -30,7 +30,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select HAVE_ACPI_RESUME
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/amd/persimmon/Kconfig b/src/mainboard/amd/persimmon/Kconfig
index 2e7442c652..5758ecf076 100644
--- a/src/mainboard/amd/persimmon/Kconfig
+++ b/src/mainboard/amd/persimmon/Kconfig
@@ -31,7 +31,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select HAVE_ACPI_RESUME
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/amd/persimmon/Makefile.inc b/src/mainboard/amd/persimmon/Makefile.inc
index 17443bc23d..e1f18a9836 100644
--- a/src/mainboard/amd/persimmon/Makefile.inc
+++ b/src/mainboard/amd/persimmon/Makefile.inc
@@ -34,5 +34,4 @@ ramstage-y += agesawrapper.c
ramstage-y += BiosCallOuts.c
ramstage-y += PlatformGnbPcie.c
-ramstage-y += reset.c
diff --git a/src/mainboard/amd/persimmon/reset.c b/src/mainboard/amd/persimmon/reset.c
deleted file mode 100644
index bb2482b57b..0000000000
--- a/src/mainboard/amd/persimmon/reset.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PRE_RAM__
-#define __PRE_RAM__ // Use simple device model for this file even in ramstage
-#endif
-#include <arch/io.h>
-#include <reset.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes;
- u32 htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for(i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
-
diff --git a/src/mainboard/amd/south_station/Kconfig b/src/mainboard/amd/south_station/Kconfig
index 1c5e401ffa..ec16e6c4b6 100644
--- a/src/mainboard/amd/south_station/Kconfig
+++ b/src/mainboard/amd/south_station/Kconfig
@@ -30,7 +30,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/amd/south_station/Makefile.inc b/src/mainboard/amd/south_station/Makefile.inc
index 59c6cd0ff8..2105082455 100644
--- a/src/mainboard/amd/south_station/Makefile.inc
+++ b/src/mainboard/amd/south_station/Makefile.inc
@@ -27,5 +27,4 @@ ramstage-y += agesawrapper.c
ramstage-y += BiosCallOuts.c
ramstage-y += PlatformGnbPcie.c
-ramstage-y += reset.c
diff --git a/src/mainboard/amd/south_station/reset.c b/src/mainboard/amd/south_station/reset.c
deleted file mode 100644
index bb2482b57b..0000000000
--- a/src/mainboard/amd/south_station/reset.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PRE_RAM__
-#define __PRE_RAM__ // Use simple device model for this file even in ramstage
-#endif
-#include <arch/io.h>
-#include <reset.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes;
- u32 htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for(i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
-
diff --git a/src/mainboard/amd/thatcher/Kconfig b/src/mainboard/amd/thatcher/Kconfig
index f619478915..a9227e570f 100644
--- a/src/mainboard/amd/thatcher/Kconfig
+++ b/src/mainboard/amd/thatcher/Kconfig
@@ -30,7 +30,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select HAVE_ACPI_RESUME
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/amd/torpedo/Kconfig b/src/mainboard/amd/torpedo/Kconfig
index 2c70143ecc..37255f21ff 100644
--- a/src/mainboard/amd/torpedo/Kconfig
+++ b/src/mainboard/amd/torpedo/Kconfig
@@ -32,7 +32,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/amd/torpedo/Makefile.inc b/src/mainboard/amd/torpedo/Makefile.inc
index 26beb37e24..1102ea2619 100644
--- a/src/mainboard/amd/torpedo/Makefile.inc
+++ b/src/mainboard/amd/torpedo/Makefile.inc
@@ -44,4 +44,3 @@ ramstage-y += dimmSpd.c
ramstage-y += BiosCallOuts.c
ramstage-y += PlatformGnbPcie.c
-ramstage-y += reset.c
diff --git a/src/mainboard/amd/torpedo/reset.c b/src/mainboard/amd/torpedo/reset.c
deleted file mode 100644
index bb2482b57b..0000000000
--- a/src/mainboard/amd/torpedo/reset.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PRE_RAM__
-#define __PRE_RAM__ // Use simple device model for this file even in ramstage
-#endif
-#include <arch/io.h>
-#include <reset.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes;
- u32 htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for(i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
-
diff --git a/src/mainboard/amd/union_station/Kconfig b/src/mainboard/amd/union_station/Kconfig
index e3e4bfec31..a096d66982 100644
--- a/src/mainboard/amd/union_station/Kconfig
+++ b/src/mainboard/amd/union_station/Kconfig
@@ -29,7 +29,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/amd/union_station/Makefile.inc b/src/mainboard/amd/union_station/Makefile.inc
index 59c6cd0ff8..2105082455 100644
--- a/src/mainboard/amd/union_station/Makefile.inc
+++ b/src/mainboard/amd/union_station/Makefile.inc
@@ -27,5 +27,4 @@ ramstage-y += agesawrapper.c
ramstage-y += BiosCallOuts.c
ramstage-y += PlatformGnbPcie.c
-ramstage-y += reset.c
diff --git a/src/mainboard/amd/union_station/reset.c b/src/mainboard/amd/union_station/reset.c
deleted file mode 100644
index bb2482b57b..0000000000
--- a/src/mainboard/amd/union_station/reset.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PRE_RAM__
-#define __PRE_RAM__ // Use simple device model for this file even in ramstage
-#endif
-#include <arch/io.h>
-#include <reset.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes;
- u32 htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for(i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
-
diff --git a/src/mainboard/asrock/e350m1/Kconfig b/src/mainboard/asrock/e350m1/Kconfig
index 4c05037488..bf44af3516 100644
--- a/src/mainboard/asrock/e350m1/Kconfig
+++ b/src/mainboard/asrock/e350m1/Kconfig
@@ -31,7 +31,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/asrock/e350m1/Makefile.inc b/src/mainboard/asrock/e350m1/Makefile.inc
index 59c6cd0ff8..2105082455 100644
--- a/src/mainboard/asrock/e350m1/Makefile.inc
+++ b/src/mainboard/asrock/e350m1/Makefile.inc
@@ -27,5 +27,4 @@ ramstage-y += agesawrapper.c
ramstage-y += BiosCallOuts.c
ramstage-y += PlatformGnbPcie.c
-ramstage-y += reset.c
diff --git a/src/mainboard/asrock/e350m1/reset.c b/src/mainboard/asrock/e350m1/reset.c
deleted file mode 100644
index bb2482b57b..0000000000
--- a/src/mainboard/asrock/e350m1/reset.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PRE_RAM__
-#define __PRE_RAM__ // Use simple device model for this file even in ramstage
-#endif
-#include <arch/io.h>
-#include <reset.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes;
- u32 htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for(i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
-
diff --git a/src/mainboard/asus/f2a85-m/Kconfig b/src/mainboard/asus/f2a85-m/Kconfig
index ad2c8b7f3a..f26b8d50b0 100644
--- a/src/mainboard/asus/f2a85-m/Kconfig
+++ b/src/mainboard/asus/f2a85-m/Kconfig
@@ -31,7 +31,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select HAVE_ACPI_RESUME
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/asus/m5a88-v/Kconfig b/src/mainboard/asus/m5a88-v/Kconfig
index 5318977cb6..942a81d1d1 100644
--- a/src/mainboard/asus/m5a88-v/Kconfig
+++ b/src/mainboard/asus/m5a88-v/Kconfig
@@ -13,7 +13,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select SUPERIO_ITE_IT8721F
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/asus/m5a88-v/Makefile.inc b/src/mainboard/asus/m5a88-v/Makefile.inc
index d7290afedd..924f9d6a53 100644
--- a/src/mainboard/asus/m5a88-v/Makefile.inc
+++ b/src/mainboard/asus/m5a88-v/Makefile.inc
@@ -1,5 +1,3 @@
-romstage-y += reset.c
-ramstage-y += reset.c
#SB800 CIMx share AGESA V5 lib code
ifneq ($(CONFIG_CPU_AMD_AGESA),y)
diff --git a/src/mainboard/asus/m5a88-v/reset.c b/src/mainboard/asus/m5a88-v/reset.c
deleted file mode 100644
index 678bc3d267..0000000000
--- a/src/mainboard/asus/m5a88-v/reset.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PRE_RAM__
-#define __PRE_RAM__ // Use simple device model for this file even in ramstage
-#endif
-#include <arch/io.h>
-#include <reset.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes, htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for (i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
diff --git a/src/mainboard/avalue/eax-785e/Kconfig b/src/mainboard/avalue/eax-785e/Kconfig
index 11fc657f1d..99b9c67f56 100644
--- a/src/mainboard/avalue/eax-785e/Kconfig
+++ b/src/mainboard/avalue/eax-785e/Kconfig
@@ -15,7 +15,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select SB_SUPERIO_HWM
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/avalue/eax-785e/Makefile.inc b/src/mainboard/avalue/eax-785e/Makefile.inc
index d7290afedd..924f9d6a53 100644
--- a/src/mainboard/avalue/eax-785e/Makefile.inc
+++ b/src/mainboard/avalue/eax-785e/Makefile.inc
@@ -1,5 +1,3 @@
-romstage-y += reset.c
-ramstage-y += reset.c
#SB800 CIMx share AGESA V5 lib code
ifneq ($(CONFIG_CPU_AMD_AGESA),y)
diff --git a/src/mainboard/avalue/eax-785e/reset.c b/src/mainboard/avalue/eax-785e/reset.c
deleted file mode 100644
index 678bc3d267..0000000000
--- a/src/mainboard/avalue/eax-785e/reset.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PRE_RAM__
-#define __PRE_RAM__ // Use simple device model for this file even in ramstage
-#endif
-#include <arch/io.h>
-#include <reset.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes, htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for (i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
diff --git a/src/mainboard/lippert/frontrunner-af/Kconfig b/src/mainboard/lippert/frontrunner-af/Kconfig
index d326746be3..9ddf97032b 100644
--- a/src/mainboard/lippert/frontrunner-af/Kconfig
+++ b/src/mainboard/lippert/frontrunner-af/Kconfig
@@ -35,7 +35,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
# erases 28 KB and writes 10 KB register dumps to SPI flash on every
# boot, wasting 3 s and causing wear! Therefore disable S3 for now.
#select HAVE_ACPI_RESUME
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/lippert/frontrunner-af/Makefile.inc b/src/mainboard/lippert/frontrunner-af/Makefile.inc
index 17443bc23d..e1f18a9836 100644
--- a/src/mainboard/lippert/frontrunner-af/Makefile.inc
+++ b/src/mainboard/lippert/frontrunner-af/Makefile.inc
@@ -34,5 +34,4 @@ ramstage-y += agesawrapper.c
ramstage-y += BiosCallOuts.c
ramstage-y += PlatformGnbPcie.c
-ramstage-y += reset.c
diff --git a/src/mainboard/lippert/frontrunner-af/reset.c b/src/mainboard/lippert/frontrunner-af/reset.c
deleted file mode 100644
index bb2482b57b..0000000000
--- a/src/mainboard/lippert/frontrunner-af/reset.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PRE_RAM__
-#define __PRE_RAM__ // Use simple device model for this file even in ramstage
-#endif
-#include <arch/io.h>
-#include <reset.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes;
- u32 htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for(i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
-
diff --git a/src/mainboard/lippert/toucan-af/Kconfig b/src/mainboard/lippert/toucan-af/Kconfig
index e8f5896fbd..07fbbeaeaa 100644
--- a/src/mainboard/lippert/toucan-af/Kconfig
+++ b/src/mainboard/lippert/toucan-af/Kconfig
@@ -37,7 +37,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
# erases 28 KB and writes 10 KB register dumps to SPI flash on every
# boot, wasting 3 s and causing wear! Therefore disable S3 for now.
#select HAVE_ACPI_RESUME
- select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select LIFT_BSP_APIC_ID
select SERIAL_CPU_INIT
diff --git a/src/mainboard/lippert/toucan-af/Makefile.inc b/src/mainboard/lippert/toucan-af/Makefile.inc
index 17443bc23d..e1f18a9836 100644
--- a/src/mainboard/lippert/toucan-af/Makefile.inc
+++ b/src/mainboard/lippert/toucan-af/Makefile.inc
@@ -34,5 +34,4 @@ ramstage-y += agesawrapper.c
ramstage-y += BiosCallOuts.c
ramstage-y += PlatformGnbPcie.c
-ramstage-y += reset.c
diff --git a/src/mainboard/lippert/toucan-af/reset.c b/src/mainboard/lippert/toucan-af/reset.c
deleted file mode 100644
index bb2482b57b..0000000000
--- a/src/mainboard/lippert/toucan-af/reset.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PRE_RAM__
-#define __PRE_RAM__ // Use simple device model for this file even in ramstage
-#endif
-#include <arch/io.h>
-#include <reset.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes;
- u32 htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for(i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
-
diff --git a/src/mainboard/supermicro/h8qgi/Kconfig b/src/mainboard/supermicro/h8qgi/Kconfig
index 1184a93f86..f13593e6e7 100644
--- a/src/mainboard/supermicro/h8qgi/Kconfig
+++ b/src/mainboard/supermicro/h8qgi/Kconfig
@@ -34,7 +34,6 @@ config BOARD_SPECIFIC_OPTIONS
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
- select HAVE_HARD_RESET
select SERIAL_CPU_INIT
select HAVE_ACPI_TABLES
select BOARD_ROMSIZE_KB_2048
diff --git a/src/mainboard/supermicro/h8qgi/Makefile.inc b/src/mainboard/supermicro/h8qgi/Makefile.inc
index 451e013ac1..77e87195d8 100644
--- a/src/mainboard/supermicro/h8qgi/Makefile.inc
+++ b/src/mainboard/supermicro/h8qgi/Makefile.inc
@@ -19,7 +19,6 @@
romstage-y += rd890_cfg.c
romstage-y += sb700_cfg.c
-romstage-y += reset.c
romstage-y += buildOpts.c
romstage-y += agesawrapper.c
romstage-y += BiosCallOuts.c
@@ -27,7 +26,6 @@ romstage-y += platform_oem.c
ramstage-y += rd890_cfg.c
ramstage-y += sb700_cfg.c
-ramstage-y += reset.c
ramstage-y += buildOpts.c
ramstage-y += agesawrapper.c
ramstage-y += BiosCallOuts.c
diff --git a/src/mainboard/supermicro/h8scm/Kconfig b/src/mainboard/supermicro/h8scm/Kconfig
index 95e6f8183a..1eadc368a9 100644
--- a/src/mainboard/supermicro/h8scm/Kconfig
+++ b/src/mainboard/supermicro/h8scm/Kconfig
@@ -34,7 +34,6 @@ config BOARD_SPECIFIC_OPTIONS
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
- select HAVE_HARD_RESET
select SERIAL_CPU_INIT
select HAVE_ACPI_TABLES
select BOARD_ROMSIZE_KB_4096
diff --git a/src/mainboard/supermicro/h8scm/Makefile.inc b/src/mainboard/supermicro/h8scm/Makefile.inc
index 451e013ac1..77e87195d8 100644
--- a/src/mainboard/supermicro/h8scm/Makefile.inc
+++ b/src/mainboard/supermicro/h8scm/Makefile.inc
@@ -19,7 +19,6 @@
romstage-y += rd890_cfg.c
romstage-y += sb700_cfg.c
-romstage-y += reset.c
romstage-y += buildOpts.c
romstage-y += agesawrapper.c
romstage-y += BiosCallOuts.c
@@ -27,7 +26,6 @@ romstage-y += platform_oem.c
ramstage-y += rd890_cfg.c
ramstage-y += sb700_cfg.c
-ramstage-y += reset.c
ramstage-y += buildOpts.c
ramstage-y += agesawrapper.c
ramstage-y += BiosCallOuts.c
diff --git a/src/mainboard/tyan/s8226/Kconfig b/src/mainboard/tyan/s8226/Kconfig
index 1db75b3f62..0d832fe9e0 100644
--- a/src/mainboard/tyan/s8226/Kconfig
+++ b/src/mainboard/tyan/s8226/Kconfig
@@ -34,7 +34,6 @@ config BOARD_SPECIFIC_OPTIONS
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
- select HAVE_HARD_RESET
select SERIAL_CPU_INIT
select HAVE_ACPI_TABLES
select BOARD_ROMSIZE_KB_4096
diff --git a/src/mainboard/tyan/s8226/Makefile.inc b/src/mainboard/tyan/s8226/Makefile.inc
index 451e013ac1..77e87195d8 100644
--- a/src/mainboard/tyan/s8226/Makefile.inc
+++ b/src/mainboard/tyan/s8226/Makefile.inc
@@ -19,7 +19,6 @@
romstage-y += rd890_cfg.c
romstage-y += sb700_cfg.c
-romstage-y += reset.c
romstage-y += buildOpts.c
romstage-y += agesawrapper.c
romstage-y += BiosCallOuts.c
@@ -27,7 +26,6 @@ romstage-y += platform_oem.c
ramstage-y += rd890_cfg.c
ramstage-y += sb700_cfg.c
-ramstage-y += reset.c
ramstage-y += buildOpts.c
ramstage-y += agesawrapper.c
ramstage-y += BiosCallOuts.c
diff --git a/src/southbridge/amd/agesa/hudson/Kconfig b/src/southbridge/amd/agesa/hudson/Kconfig
index b346863d07..af305eed72 100644
--- a/src/southbridge/amd/agesa/hudson/Kconfig
+++ b/src/southbridge/amd/agesa/hudson/Kconfig
@@ -21,6 +21,7 @@ config SOUTHBRIDGE_AMD_AGESA_HUDSON
bool
select IOAPIC
select HAVE_USBDEBUG
+ select HAVE_HARD_RESET
if SOUTHBRIDGE_AMD_AGESA_HUDSON
diff --git a/src/southbridge/amd/cimx/sb700/Kconfig b/src/southbridge/amd/cimx/sb700/Kconfig
index e98d3ed22d..97cdf1c229 100644
--- a/src/southbridge/amd/cimx/sb700/Kconfig
+++ b/src/southbridge/amd/cimx/sb700/Kconfig
@@ -21,6 +21,7 @@ config SOUTHBRIDGE_AMD_CIMX_SB700
bool
select IOAPIC
select AMD_SB_CIMX
+ select HAVE_HARD_RESET
if SOUTHBRIDGE_AMD_CIMX_SB700
config SATA_CONTROLLER_MODE
diff --git a/src/southbridge/amd/cimx/sb700/Makefile.inc b/src/southbridge/amd/cimx/sb700/Makefile.inc
index 94a0deadd6..268629f45c 100644
--- a/src/southbridge/amd/cimx/sb700/Makefile.inc
+++ b/src/southbridge/amd/cimx/sb700/Makefile.inc
@@ -22,8 +22,10 @@
romstage-y += early.c
romstage-y += smbus.c
+romstage-y += reset.c
ramstage-y += late.c
+ramstage-y += reset.c
ramstage-y += smbus.c
ramstage-y += lpc.c
diff --git a/src/mainboard/supermicro/h8qgi/reset.c b/src/southbridge/amd/cimx/sb700/reset.c
index 7a96aa4595..7a96aa4595 100644
--- a/src/mainboard/supermicro/h8qgi/reset.c
+++ b/src/southbridge/amd/cimx/sb700/reset.c
diff --git a/src/southbridge/amd/cimx/sb800/Kconfig b/src/southbridge/amd/cimx/sb800/Kconfig
index 554d8c7009..b82409d883 100644
--- a/src/southbridge/amd/cimx/sb800/Kconfig
+++ b/src/southbridge/amd/cimx/sb800/Kconfig
@@ -22,6 +22,7 @@ config SOUTHBRIDGE_AMD_CIMX_SB800
default n
select IOAPIC
select AMD_SB_CIMX
+ select HAVE_HARD_RESET
if SOUTHBRIDGE_AMD_CIMX_SB800
config BOOTBLOCK_SOUTHBRIDGE_INIT
diff --git a/src/southbridge/amd/cimx/sb800/Makefile.inc b/src/southbridge/amd/cimx/sb800/Makefile.inc
index 524c2d3274..831cc2ecbd 100644
--- a/src/southbridge/amd/cimx/sb800/Makefile.inc
+++ b/src/southbridge/amd/cimx/sb800/Makefile.inc
@@ -23,9 +23,11 @@
romstage-y += cfg.c
romstage-y += early.c
romstage-y += smbus.c
+romstage-y += reset.c
ramstage-y += cfg.c
ramstage-y += late.c
+ramstage-y += reset.c
ramstage-$(CONFIG_SB800_MANUAL_FAN_CONTROL) += fan.c
ramstage-$(CONFIG_SB800_IMC_FAN_CONTROL) += fan.c
diff --git a/src/mainboard/supermicro/h8scm/reset.c b/src/southbridge/amd/cimx/sb800/reset.c
index 7a96aa4595..7a96aa4595 100644
--- a/src/mainboard/supermicro/h8scm/reset.c
+++ b/src/southbridge/amd/cimx/sb800/reset.c
diff --git a/src/southbridge/amd/cimx/sb900/Kconfig b/src/southbridge/amd/cimx/sb900/Kconfig
index aa30e561c6..5d3b0a1328 100755
--- a/src/southbridge/amd/cimx/sb900/Kconfig
+++ b/src/southbridge/amd/cimx/sb900/Kconfig
@@ -22,6 +22,7 @@ config SOUTHBRIDGE_AMD_CIMX_SB900
default n
select IOAPIC
select AMD_SB_CIMX
+ select HAVE_HARD_RESET
if SOUTHBRIDGE_AMD_CIMX_SB900
config SATA_CONTROLLER_MODE
diff --git a/src/southbridge/amd/cimx/sb900/Makefile.inc b/src/southbridge/amd/cimx/sb900/Makefile.inc
index ebb3e3f62d..cc4c553590 100755
--- a/src/southbridge/amd/cimx/sb900/Makefile.inc
+++ b/src/southbridge/amd/cimx/sb900/Makefile.inc
@@ -23,10 +23,12 @@
romstage-y += cfg.c
romstage-y += early.c
romstage-y += smbus.c
+romstage-y += reset.c
ramstage-y += cfg.c
ramstage-y += early.c
ramstage-y += late.c
+ramstage-y += reset.c
ramstage-y += smbus.c
ramstage-y += lpc.c
diff --git a/src/mainboard/tyan/s8226/reset.c b/src/southbridge/amd/cimx/sb900/reset.c
index 7a96aa4595..7a96aa4595 100644
--- a/src/mainboard/tyan/s8226/reset.c
+++ b/src/southbridge/amd/cimx/sb900/reset.c