summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/southbridge/intel/i82801gx/azalia.c19
-rw-r--r--src/southbridge/intel/i82801gx/early_smbus.c6
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx.c3
-rw-r--r--src/southbridge/intel/i82801gx/lpc.c23
-rw-r--r--src/southbridge/intel/i82801gx/pcie.c15
-rw-r--r--src/southbridge/intel/i82801gx/sata.c20
-rw-r--r--src/southbridge/intel/i82801gx/smbus.c9
-rw-r--r--src/southbridge/intel/i82801gx/smihandler.c8
-rw-r--r--src/southbridge/intel/i82801gx/usb.c2
-rw-r--r--src/southbridge/intel/i82801gx/usb_ehci.c3
10 files changed, 38 insertions, 70 deletions
diff --git a/src/southbridge/intel/i82801gx/azalia.c b/src/southbridge/intel/i82801gx/azalia.c
index a701c47a81..4a2b50e4d4 100644
--- a/src/southbridge/intel/i82801gx/azalia.c
+++ b/src/southbridge/intel/i82801gx/azalia.c
@@ -30,9 +30,7 @@ static int set_bits(void *port, u32 mask, u32 val)
reg32 |= val;
write32(port, reg32);
- /* Wait for readback of register to
- * match what was just written to it
- */
+ /* Wait for readback of register to match what was just written to it */
count = 50;
do {
/* Wait 1ms based on BKDG wait time */
@@ -100,9 +98,7 @@ static u32 find_verb(struct device *dev, u32 viddid, const u32 **verb)
static int wait_for_ready(u8 *base)
{
- /* Use a 50 usec timeout - the Linux kernel uses the
- * same duration */
-
+ /* Use a 50 usec timeout - the Linux kernel uses the same duration */
int timeout = 50;
while (timeout--) {
@@ -116,9 +112,8 @@ static int wait_for_ready(u8 *base)
}
/**
- * Wait 50usec for the codec to indicate that it accepted
- * the previous command. No response would imply that the code
- * is non-operative
+ * Wait 50usec for the codec to indicate that it accepted the previous command.
+ * No response would imply that the code is non-operative.
*/
static int wait_for_valid(u8 *base)
@@ -130,14 +125,12 @@ static int wait_for_valid(u8 *base)
reg32 |= (1 << 0) | (1 << 1);
write32(base + 0x68, reg32);
- /* Use a 50 usec timeout - the Linux kernel uses the
- * same duration */
+ /* Use a 50 usec timeout - the Linux kernel uses the same duration */
int timeout = 50;
while (timeout--) {
reg32 = read32(base + HDA_ICII_REG);
- if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
- HDA_ICII_VALID)
+ if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == HDA_ICII_VALID)
return 0;
udelay(1);
}
diff --git a/src/southbridge/intel/i82801gx/early_smbus.c b/src/southbridge/intel/i82801gx/early_smbus.c
index ea639f9fc4..3a1369a34b 100644
--- a/src/southbridge/intel/i82801gx/early_smbus.c
+++ b/src/southbridge/intel/i82801gx/early_smbus.c
@@ -21,8 +21,7 @@ int smbus_enable_iobar(uintptr_t base)
return -1;
/* Set SMBus I/O base. */
- pci_write_config32(dev, SMB_BASE,
- base | PCI_BASE_ADDRESS_SPACE_IO);
+ pci_write_config32(dev, SMB_BASE, base | PCI_BASE_ADDRESS_SPACE_IO);
/* Set SMBus enable. */
pci_write_config8(dev, HOSTC, HST_EN);
@@ -48,8 +47,7 @@ int smbus_block_read(unsigned int device, unsigned int cmd, u8 bytes, u8 *buf)
return do_smbus_block_read(SMBUS_IO_BASE, device, cmd, bytes, buf);
}
-int smbus_block_write(unsigned int device, unsigned int cmd, u8 bytes,
- const u8 *buf)
+int smbus_block_write(unsigned int device, unsigned int cmd, u8 bytes, const u8 *buf)
{
return do_smbus_block_write(SMBUS_IO_BASE, device, cmd, bytes, buf);
}
diff --git a/src/southbridge/intel/i82801gx/i82801gx.c b/src/southbridge/intel/i82801gx/i82801gx.c
index 5df36ddc81..1a5366fe87 100644
--- a/src/southbridge/intel/i82801gx/i82801gx.c
+++ b/src/southbridge/intel/i82801gx/i82801gx.c
@@ -61,8 +61,7 @@ void i82801gx_enable(struct device *dev)
/* Ensure memory, io, and bus master are all disabled */
reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 &= ~(PCI_COMMAND_MASTER |
- PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
+ reg32 &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
pci_write_config32(dev, PCI_COMMAND, reg32);
/* Hide this device if possible */
diff --git a/src/southbridge/intel/i82801gx/lpc.c b/src/southbridge/intel/i82801gx/lpc.c
index 8949e8d7e7..c24460cd81 100644
--- a/src/southbridge/intel/i82801gx/lpc.c
+++ b/src/southbridge/intel/i82801gx/lpc.c
@@ -52,8 +52,7 @@ static void i82801gx_enable_ioapic(struct device *dev)
static void i82801gx_enable_serial_irqs(struct device *dev)
{
/* Set packet length and toggle silent mode bit for one frame. */
- pci_write_config8(dev, SERIRQ_CNTL,
- (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0));
+ pci_write_config8(dev, SERIRQ_CNTL, (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0));
}
/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
@@ -129,9 +128,7 @@ static void i82801gx_gpi_routing(struct device *dev)
config_t *config = dev->chip_info;
u32 reg32 = 0;
- /* An array would be much nicer here, or some
- * other method of doing this.
- */
+ /* An array would be much nicer here, or some other method of doing this. */
reg32 |= (config->gpi0_routing & 0x03) << 0;
reg32 |= (config->gpi1_routing & 0x03) << 2;
reg32 |= (config->gpi2_routing & 0x03) << 4;
@@ -411,8 +408,7 @@ unsigned long acpi_fill_madt(unsigned long current)
current = acpi_create_madt_lapics(current);
/* IOAPIC */
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
- 2, IO_APIC_ADDR, 0);
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, IO_APIC_ADDR, 0);
/* LAPIC_NMI */
current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)
@@ -675,14 +671,13 @@ static struct device_operations device_ops = {
.final = lpc_final,
};
-/* 27b0: 82801GH (ICH7 DH) */
-/* 27b8: 82801GB/GR (ICH7/ICH7R) */
-/* 27b9: 82801GBM/GU (ICH7-M/ICH7-U) */
-/* 27bc: 82NM10 (NM10) */
-/* 27bd: 82801GHM (ICH7-M DH) */
-
static const unsigned short pci_device_ids[] = {
- 0x27b0, 0x27b8, 0x27b9, 0x27bc, 0x27bd, 0
+ 0x27b0, /* 82801GH (ICH7 DH) */
+ 0x27b8, /* 82801GB/GR (ICH7/ICH7R) */
+ 0x27b9, /* 82801GBM/GU (ICH7-M/ICH7-U) */
+ 0x27bc, /* 82NM10 (NM10) */
+ 0x27bd, /* 82801GHM (ICH7-M DH) */
+ 0
};
static const struct pci_driver ich7_lpc __pci_driver = {
diff --git a/src/southbridge/intel/i82801gx/pcie.c b/src/southbridge/intel/i82801gx/pcie.c
index 7efaca9130..4398ad56b0 100644
--- a/src/southbridge/intel/i82801gx/pcie.c
+++ b/src/southbridge/intel/i82801gx/pcie.c
@@ -129,8 +129,7 @@ static void root_port_init_config(struct device *dev)
rp = root_port_number(dev);
if (rp > rpc.num_ports) {
- printk(BIOS_ERR, "Found Root Port %d, expecting %d\n",
- rp, rpc.num_ports);
+ printk(BIOS_ERR, "Found Root Port %d, expecting %d\n", rp, rpc.num_ports);
return;
}
@@ -170,8 +169,7 @@ static void root_port_commit_config(struct device *dev)
int coalesce = 0;
if (dev->chip_info != NULL) {
- struct southbridge_intel_i82801gx_config *config
- = dev->chip_info;
+ struct southbridge_intel_i82801gx_config *config = dev->chip_info;
coalesce = config->pcie_port_coalesce;
}
@@ -184,16 +182,14 @@ static void root_port_commit_config(struct device *dev)
pcie_dev = rpc.ports[i];
if (pcie_dev == NULL) {
- printk(BIOS_ERR, "Root Port %d device is NULL?\n",
- i + 1);
+ printk(BIOS_ERR, "Root Port %d device is NULL?\n", i + 1);
continue;
}
if (pcie_dev->enabled)
continue;
- printk(BIOS_DEBUG, "%s: Disabling device\n",
- dev_path(pcie_dev));
+ printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(pcie_dev));
/* Disable this device if possible */
i82801gx_enable(pcie_dev);
@@ -222,8 +218,7 @@ static void root_port_commit_config(struct device *dev)
}
}
- printk(BIOS_SPEW, "ICH: RPFN 0x%08x -> 0x%08x\n",
- rpc.orig_rpfn, rpc.new_rpfn);
+ printk(BIOS_SPEW, "ICH: RPFN 0x%08x -> 0x%08x\n", rpc.orig_rpfn, rpc.new_rpfn);
RCBA32(RPFN) = rpc.new_rpfn;
}
diff --git a/src/southbridge/intel/i82801gx/sata.c b/src/southbridge/intel/i82801gx/sata.c
index 533cfef9a4..4b4511c4d8 100644
--- a/src/southbridge/intel/i82801gx/sata.c
+++ b/src/southbridge/intel/i82801gx/sata.c
@@ -28,8 +28,7 @@ static u8 get_ich7_sata_ports(void)
case 0x27bc:
return 0x3;
default:
- printk(BIOS_ERR,
- "i82801gx_sata: error: cannot determine port config\n");
+ printk(BIOS_ERR, "i82801gx_sata: error: cannot determine port config\n");
return 0;
}
}
@@ -54,11 +53,9 @@ void sata_enable(struct device *dev)
& AHCI_UNSUPPORTED);
if (!ahci_supported) {
- /* Fallback to IDE PLAIN for sata for the rest of the
- initialization */
+ /* Fallback to IDE PLAIN for sata for the rest of the initialization */
config->sata_mode = SATA_MODE_IDE_PLAIN;
- printk(BIOS_DEBUG,
- "AHCI not supported, falling back to plain mode.\n");
+ printk(BIOS_DEBUG, "AHCI not supported, falling back to plain mode.\n");
}
}
@@ -66,12 +63,10 @@ void sata_enable(struct device *dev)
if (config->sata_mode == SATA_MODE_AHCI) {
/* Set map to ahci */
pci_write_config8(dev, SATA_MAP,
- (pci_read_config8(dev, SATA_MAP)
- & ~0xc3) | 0x40);
+ (pci_read_config8(dev, SATA_MAP) & ~0xc3) | 0x40);
} else {
/* Set map to ide */
- pci_write_config8(dev, SATA_MAP,
- pci_read_config8(dev, SATA_MAP) & ~0xc3);
+ pci_write_config8(dev, SATA_MAP, pci_read_config8(dev, SATA_MAP) & ~0xc3);
}
/* At this point, the new pci id will appear on the bus */
}
@@ -143,8 +138,7 @@ static void sata_init(struct device *dev)
struct resource *ahci_res = find_resource(dev, PCI_BASE_ADDRESS_5);
if (ahci_res != NULL)
/* write AHCI GHC_PI register */
- write32(res2mmio(ahci_res, 0xc, 0),
- config->sata_ports_implemented);
+ write32(res2mmio(ahci_res, 0xc, 0), config->sata_ports_implemented);
break;
default:
case SATA_MODE_IDE_PLAIN:
@@ -219,7 +213,7 @@ static void sata_init(struct device *dev)
}
static struct pci_operations sata_pci_ops = {
- .set_subsystem = pci_dev_set_subsystem,
+ .set_subsystem = pci_dev_set_subsystem,
};
static struct device_operations sata_ops = {
diff --git a/src/southbridge/intel/i82801gx/smbus.c b/src/southbridge/intel/i82801gx/smbus.c
index d533b8776a..b6c669af55 100644
--- a/src/southbridge/intel/i82801gx/smbus.c
+++ b/src/southbridge/intel/i82801gx/smbus.c
@@ -34,8 +34,7 @@ static int lsmbus_write_byte(struct device *dev, u8 address, u8 data)
return do_smbus_write_byte(res->base, device, address, data);
}
-static int lsmbus_block_write(struct device *dev, u8 cmd, u8 bytes,
- const u8 *buf)
+static int lsmbus_block_write(struct device *dev, u8 cmd, u8 bytes, const u8 *buf)
{
u16 device;
struct resource *res;
@@ -62,9 +61,9 @@ static int lsmbus_block_read(struct device *dev, u8 cmd, u8 bytes, u8 *buf)
static struct smbus_bus_operations lops_smbus_bus = {
.read_byte = lsmbus_read_byte,
- .write_byte = lsmbus_write_byte,
- .block_read = lsmbus_block_read,
- .block_write = lsmbus_block_write,
+ .write_byte = lsmbus_write_byte,
+ .block_read = lsmbus_block_read,
+ .block_write = lsmbus_block_write,
};
static struct pci_operations smbus_pci_ops = {
diff --git a/src/southbridge/intel/i82801gx/smihandler.c b/src/southbridge/intel/i82801gx/smihandler.c
index d19ee1191b..b5642e7b53 100644
--- a/src/southbridge/intel/i82801gx/smihandler.c
+++ b/src/southbridge/intel/i82801gx/smihandler.c
@@ -18,15 +18,11 @@
#include "nvs.h"
-/* While we read PMBASE dynamically in case it changed, let's
- * initialize it with a sane value
- */
+/* While we read PMBASE dynamically in case it changed, let's initialize it with a sane value */
u16 pmbase = DEFAULT_PMBASE;
u8 smm_initialized = 0;
-/* GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located
- * by coreboot.
- */
+/* GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located by coreboot. */
global_nvs_t *gnvs = (global_nvs_t *)0x0;
void southbridge_update_gnvs(u8 apm_cnt, int *smm_done)
diff --git a/src/southbridge/intel/i82801gx/usb.c b/src/southbridge/intel/i82801gx/usb.c
index 8a8b58cb88..d4b559a37b 100644
--- a/src/southbridge/intel/i82801gx/usb.c
+++ b/src/southbridge/intel/i82801gx/usb.c
@@ -31,7 +31,7 @@ static void usb_init(struct device *dev)
}
static struct pci_operations usb_pci_ops = {
- .set_subsystem = pci_dev_set_subsystem,
+ .set_subsystem = pci_dev_set_subsystem,
};
static struct device_operations usb_ops = {
diff --git a/src/southbridge/intel/i82801gx/usb_ehci.c b/src/southbridge/intel/i82801gx/usb_ehci.c
index 0efae6daca..d127496cd6 100644
--- a/src/southbridge/intel/i82801gx/usb_ehci.c
+++ b/src/southbridge/intel/i82801gx/usb_ehci.c
@@ -46,8 +46,7 @@ static void usb_ehci_init(struct device *dev)
printk(BIOS_DEBUG, "done.\n");
}
-static void usb_ehci_set_subsystem(struct device *dev, unsigned int vendor,
- unsigned int device)
+static void usb_ehci_set_subsystem(struct device *dev, unsigned int vendor, unsigned int device)
{
u8 access_cntl;