diff options
| -rw-r--r-- | src/arch/i386/init/car.S | 357 | ||||
| -rw-r--r-- | src/arch/i386/init/entry.S | 156 | ||||
| -rw-r--r-- | src/arch/i386/init/ldscript.ld | 40 | ||||
| -rw-r--r-- | src/arch/i386/init/ldscript_fallback_cbfs.lb | 1 | ||||
| -rw-r--r-- | src/lib/Config.lb | 2 | ||||
| -rw-r--r-- | src/mainboard/emulation/qemu-x86/Config.lb | 123 | ||||
| -rw-r--r-- | src/mainboard/emulation/qemu-x86/Options.lb | 13 | ||||
| -rw-r--r-- | src/mainboard/emulation/qemu-x86/failover.c | 9 | ||||
| -rw-r--r-- | src/mainboard/emulation/qemu-x86/rom.c | 30 | ||||
| -rw-r--r-- | src/pc80/Config.lb | 4 | ||||
| -rw-r--r-- | src/pc80/serial.c | 2 | ||||
| -rw-r--r-- | targets/emulation/qemu-x86/Config-car.lb | 26 | ||||
| -rw-r--r-- | targets/emulation/qemu-x86/Config.lb | 2 |
13 files changed, 705 insertions, 60 deletions
diff --git a/src/arch/i386/init/car.S b/src/arch/i386/init/car.S new file mode 100644 index 0000000000..94ffc648c5 --- /dev/null +++ b/src/arch/i386/init/car.S @@ -0,0 +1,357 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com> + * Copyright (C) 2005 Eswar Nallusamy, LANL + * Copyright (C) 2005 Tyan + * (Written by Yinghai Lu <yhlu@tyan.com> for Tyan) + * Copyright (C) 2007 coresystems GmbH + * (Written by Stefan Reinauer <stepan@coresystems.de> for coresystems GmbH) + * Copyright (C) 2008 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Init code - Switch CPU to protected mode and enable Cache-as-Ram (CAR). */ + +#include <arch/intel.h> + +#define ROM_CODE_SEG 0x08 +#define ROM_DATA_SEG 0x10 + +#define CACHE_RAM_CODE_SEG 0x18 +#define CACHE_RAM_DATA_SEG 0x20 + + /* When we come here we are in protected mode. We expand the stack + * and copy the data segment from ROM to the memory. + * + * After that, we call the chipset bootstrap routine that + * does what is left of the chipset initialization. + * + * NOTE: Aligned to 4 so that we are sure that the prefetch + * cache will be reloaded. + */ + .section .rom.text + .align 4 + .globl protected_stage0 +protected_stage0: + lgdt %cs:gdtptr + ljmp $ROM_CODE_SEG, $__protected_stage0 + +.globl __protected_stage0 +__protected_stage0: + /* Save the BIST result. */ + movl %eax, %ebp + + intel_chip_post_macro(0x01) + + movw $ROM_DATA_SEG, %ax + movw %ax, %ds + movw %ax, %es + movw %ax, %ss + movw %ax, %fs + movw %ax, %gs + + /* Restore the BIST value to %eax. */ + movl %ebp, %eax + +.align 4 + +/* disable HyperThreading is done by eswar + * the other is very similar to the AMD CAR, except remove amd specific msr + */ + +#define CacheSize DCACHE_RAM_SIZE +#define CacheBase DCACHE_RAM_BASE + +#include <cpu/x86/mtrr.h> + + /* Save the BIST result */ + movl %eax, %ebp + +CacheAsRam: + /* Check whether the processor has HT capability */ + movl $01, %eax + cpuid + btl $28, %edx + jnc NotHtProcessor + bswapl %ebx + cmpb $01, %bh + jbe NotHtProcessor + + /* It is a HT processor; Send SIPI to the other logical processor + * within this processor so that the CAR related common system + * registers are programmed accordingly + */ + + /* Use some register that is common to both logical processors + * as semaphore. Refer Appendix B, Vol.3 + */ + + xorl %eax, %eax + xorl %edx, %edx + movl $0x250, %ecx + wrmsr + + /* Figure out the logical AP's APIC ID; the following logic will work + * only for processors with 2 threads. + * + * Refer to Vol 3. Table 7-1 for details about this logic + */ + movl $0xFEE00020, %esi + movl (%esi), %ebx + andl $0xFF000000, %ebx + bswapl %ebx + btl $0, %ebx + jnc LogicalAP0 + andb $0xFE, %bl + jmp SendSIPI +LogicalAP0: + orb $0x01, %bl +SendSIPI: + bswapl %ebx /* ebx - logical AP's APIC ID */ + + /* Fill up the IPI command registers in the Local APIC mapped to + * default address and issue SIPI to the other logical processor + * within this processor die. + */ + +RetrySIPI: + movl %ebx, %eax + movl $0xFEE00310, %esi + movl %eax, (%esi) + + /* SIPI vector - F900:0000 */ + movl $0x000006F9, %eax + movl $0xFEE00300, %esi + movl %eax, (%esi) + + movl $0x30, %ecx +SIPIDelay: + pause + decl %ecx + jnz SIPIDelay + + movl (%esi), %eax + andl $0x00001000, %eax + jnz RetrySIPI + + /* Wait for the Logical AP to complete initialization */ +LogicalAPSIPINotdone: + movl $0x250, %ecx + rdmsr + orl %eax, %eax + jz LogicalAPSIPINotdone + + + +NotHtProcessor: + /* Set the default memory type and enable fixed and variable MTRRs */ + movl $MTRRdefType_MSR, %ecx + xorl %edx, %edx + /* Enable Variable and Fixed MTRRs */ + movl $0x00000c00, %eax + wrmsr + + /* Clear all MTRRs */ + xorl %edx, %edx + movl $fixed_mtrr_msr, %esi + +clear_fixed_var_mtrr: + lodsl (%esi), %eax + testl %eax, %eax + jz clear_fixed_var_mtrr_out + + movl %eax, %ecx + xorl %eax, %eax + wrmsr + + jmp clear_fixed_var_mtrr +clear_fixed_var_mtrr_out: + +/* 0x06 is the WB IO type for a given 4k segment. + * segs is the number of 4k segments in the area of the particular + * register we want to use for CAR. + * reg is the register where the IO type should be stored. + */ +.macro extractmask segs, reg +.if \segs <= 0 + /* The xorl here is superfluous because at the point of first execution + * of this macro, %eax and %edx are cleared. Later invocations of this + * macro will have a monotonically increasing segs parameter. + */ + xorl \reg, \reg +.elseif \segs == 1 + movl $0x06000000, \reg /* WB IO type */ +.elseif \segs == 2 + movl $0x06060000, \reg /* WB IO type */ +.elseif \segs == 3 + movl $0x06060600, \reg /* WB IO type */ +.elseif \segs >= 4 + movl $0x06060606, \reg /* WB IO type */ +.endif +.endm + +/* size is the cache size in bytes we want to use for CAR. + * windowoffset is the 32k-aligned window into CAR size + */ +.macro simplemask carsize, windowoffset +/* DO NOT CHANGE THE FORMATTING of the two lines below! Whitespace is + * interpreted as an argument delimiter by some versions of GNU as. */ + extractmask (((\carsize-\windowoffset)/0x1000)-4), %eax + extractmask (((\carsize-\windowoffset)/0x1000)), %edx +.endm + +#if CacheSize > 0x10000 +#error Invalid CAR size, must be at most 64k. +#endif +#if CacheSize < 0x1000 +#error Invalid CAR size, must be at least 4k. This is a processor limitation. +#endif +#if (CacheSize & (0x1000 - 1)) +#error Invalid CAR size, is not a multiple of 4k. This is a processor limitation. +#endif + +#if CacheSize > 0x8000 + /* enable caching for 32K-64K using fixed mtrr */ + movl $0x268, %ecx /* fix4k_c0000*/ + simplemask CacheSize, 0x8000 + wrmsr +#endif + + /* enable caching for 0-32K using fixed mtrr */ + movl $0x269, %ecx /* fix4k_c8000*/ + simplemask CacheSize, 0 + wrmsr + +#if defined(CONFIG_XIP_ROM_SIZE) && defined(CONFIG_XIP_ROM_BASE) + /* enable write base caching so we can do execute in place + * on the flash rom. + */ + movl $0x202, %ecx + xorl %edx, %edx + movl $(XIP_ROM_BASE | MTRR_TYPE_WRBACK), %eax + wrmsr + + movl $0x203, %ecx + movl $0x0000000f, %edx + movl $(~(XIP_ROM_SIZE - 1) | 0x800), %eax + wrmsr +#endif /* XIP_ROM_SIZE && XIP_ROM_BASE */ + + /* enable cache */ + movl %cr0, %eax + andl $0x9fffffff,%eax + movl %eax, %cr0 + + /* Read the range with lodsl*/ + movl $CacheBase, %esi + cld + movl $(CacheSize>>2), %ecx + rep lodsl + + /* Clear the range */ + movl $CacheBase, %edi + movl $(CacheSize>>2), %ecx + xorl %eax, %eax + rep stosl + + + /* TODO: make this a config variable */ +#if CONFIG_CARTEST + /* check the cache as ram */ + movl $CacheBase, %esi + movl $(CacheSize>>2), %ecx +.xin1: + movl %esi, %eax + movl %eax, (%esi) + decl %ecx + je .xout1 + add $4, %esi + jmp .xin1 +.xout1: + + movl $CacheBase, %esi +// movl $(CacheSize>>2), %ecx + movl $4, %ecx +.xin1x: + movl %esi, %eax + + movl $0x4000, %edx + movb %ah, %al +.testx1: + outb %al, $0x80 + decl %edx + jnz .testx1 + + movl (%esi), %eax + cmpb 0xff, %al + je .xin2 /* dont show */ + + movl $0x4000, %edx +.testx2: + outb %al, $0x80 + decl %edx + jnz .testx2 + +.xin2: decl %ecx + je .xout1x + add $4, %esi + jmp .xin1x +.xout1x: + +#endif + + movl $(CacheBase+CacheSize-4), %eax + movl %eax, %esp + + /* Load a different set of data segments */ + movw $CACHE_RAM_DATA_SEG, %ax + movw %ax, %ds + movw %ax, %es + movw %ax, %ss + +lout: + /* Store zero for the pointer to the global variables. */ + pushl $0 + + /* Restore the BIST result. */ + movl %ebp, %eax + + /* We need to set ebp? No need. */ + movl %esp, %ebp + + /* Third parameter: cpu #: 0 == BSP all other are APs. + * 0 until SMP support is added. + */ + pushl $0 + /* Second parameter: init_detected */ + /* Store zero for the unused init_detected parameter. */ + pushl $0 + /* First parameter: bist */ + pushl %eax + call main + /* We will not go back. */ + +fixed_mtrr_msr: + .long 0x250, 0x258, 0x259 + .long 0x268, 0x269, 0x26A + .long 0x26B, 0x26C, 0x26D + .long 0x26E, 0x26F +var_mtrr_msr: + .long 0x200, 0x201, 0x202, 0x203 + .long 0x204, 0x205, 0x206, 0x207 + .long 0x208, 0x209, 0x20A, 0x20B + .long 0x20C, 0x20D, 0x20E, 0x20F + .long 0x000 /* NULL, end of table */ diff --git a/src/arch/i386/init/entry.S b/src/arch/i386/init/entry.S new file mode 100644 index 0000000000..f091c84d1f --- /dev/null +++ b/src/arch/i386/init/entry.S @@ -0,0 +1,156 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 1999 Ronald G. Minnich + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <arch/rom_segs.h> + .code16 + .globl _stage0 +_stage0: + cli + + /* Save the BIST result. */ + movl %eax, %ebp; + + /* thanks to kmliu@sis.com.tw for this TLB fix */ + /* IMMEDIATELY invalidate the translation lookaside buffer (TLB) before + * executing any further code. Even though paging is disabled we + * could still get false address translations due to the TLB if we + * didn't invalidate it. + */ + xorl %eax, %eax + movl %eax, %cr3 /* Invalidate TLB. */ + + /* Switch to protected mode. */ + + /* NOTE: With GNU assembler version 2.15.94.0.2.2 (i386-redhat-linux) + * using BFD version 2.15.94.0.2.2 20041220 this works fine without all + * the ld hackery and other things. So leave it as is with this comment. + */ + + data32 lgdt %cs:gdtptr + + movl %cr0, %eax + andl $0x7FFAFFD1, %eax /* PG, AM, WP, NE, TS, EM, MP = 0 */ + orl $0x60000001, %eax /* CD, NW, PE = 1 */ + movl %eax, %cr0 + + /* Restore BIST result. */ + movl %ebp, %eax + + // port80_post(0x23) + /* Now we are in protected mode. Jump to a 32 bit code segment. */ + data32 ljmp $ROM_CODE_SEG, $protected_stage0 + + /* I am leaving this weird jump in here in the event that future gas + * bugs force it to be used. + */ + /* .byte 0x66 */ + .code32 + /* ljmp $ROM_CODE_SEG, $protected_stage0 */ + + /* .code16 */ + .align 4 + .globl gdt16 +gdt16 = . - _stage0 +gdt16x: + .word gdt16xend - gdt16x -1 /* Compute the table limit. */ + .long gdt16x + .word 0 + + /* selgdt 0x08, flat code segment */ + .word 0xffff, 0x0000 + .byte 0x00, 0x9b, 0xcf, 0x00 + + /* selgdt 0x10, flat data segment */ + .word 0xffff, 0x0000 + .byte 0x00, 0x93, 0xcf, 0x00 +gdt16xend: + + /* From now on we are 32 bit. */ + .code32 + + /* We have two gdts where we could have one. That is ok. + * + * Let's not worry about this -- optimizing gdt is pointless since + * we're only in it for a little bit. + * + * Btw. note the trick below: The GDT points to ITSELF, and the first + * good descriptor is at offset 8. So you word-align the table, and + * then because you chose 8, you get a nice 64-bit aligned GDT entry, + * which is good as this is the size of the entry. + * Just in case you ever wonder why people do this. + */ + .align 4 + .globl gdtptr + .globl gdt_limit +gdt_limit = gdt_end - gdt - 1 /* Compute the table limit. */ + +gdt: +gdtptr: + .word gdt_end - gdt -1 /* Compute the table limit. */ + .long gdt /* We know the offset. */ + .word 0 + + /* selgdt 0x08, flat code segment */ + .word 0xffff, 0x0000 + .byte 0x00, 0x9b, 0xcf, 0x00 + + /* selgdt 0x10, flat data segment */ + .word 0xffff, 0x0000 + .byte 0x00, 0x93, 0xcf, 0x00 + + /* selgdt 0x18, flat code segment for CAR */ + .word 0xffff, 0x0000 + .byte 0x00, 0x9b, 0xcf, 0x00 + + /* selgdt 0x20, flat data segment for CAR */ + .word 0xffff, 0x0000 + .byte 0x00, 0x93, 0xcf, 0x00 +gdt_end: + +/* Reset vector. */ + +/* + * RVECTOR: Size of reset vector, default is 0x10. + * RESRVED: Size of vpd code, default is 0xf0. + * BOOTBLK: Size of bootblock code, default is 0x1f00 (8k-256b). + */ + +SEGMENT_SIZE = 0x10000 +RVECTOR = 0x00010 + +/* Due to YET ANOTHER BUG in GNU bintools, you can NOT have a code16 here. + * I think we should leave it this way forever, as the bugs come and + * go -- and come again. + * + * .code16 + * .section ".rom.text" + */ +.section ".reset", "ax" + .globl _resetjump +_resetjump: + /* GNU bintools bugs again. This jumps to stage0 - 2. Sigh. */ + /* jmp _stage0 */ + .byte 0xe9 + .int _stage0 - ( . + 2 ) + + /* Note: The above jump is hand coded to work around bugs in binutils. + * 5 bytes are used for a 3 byte instruction. This works because x86 + * is little endian and allows us to use supported 32 bit relocations + * instead of the weird 16 bit relocations that binutils does not + * handle consistenly between versions because they are used so rarely. + */ diff --git a/src/arch/i386/init/ldscript.ld b/src/arch/i386/init/ldscript.ld new file mode 100644 index 0000000000..e56f644034 --- /dev/null +++ b/src/arch/i386/init/ldscript.ld @@ -0,0 +1,40 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Ronald G. Minnich <rminnich@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +TARGET(binary) +SECTIONS +{ + /DISCARD/ : { + *(.comment) + *(.note.*) + *(.note) + } +} + +SECTIONS { + _ROMTOP = 0xfffffff0; + . = _ROMTOP; + .resetvector . : { + *(.reset) + . = 15 ; + BYTE(0x00); + } +} + diff --git a/src/arch/i386/init/ldscript_fallback_cbfs.lb b/src/arch/i386/init/ldscript_fallback_cbfs.lb index d1b56ce3b2..52274d1356 100644 --- a/src/arch/i386/init/ldscript_fallback_cbfs.lb +++ b/src/arch/i386/init/ldscript_fallback_cbfs.lb @@ -46,6 +46,7 @@ SECTIONS *(.rom.text); *(.rom.data); *(.init.rodata.*); + *(.init.text); *(.rodata.*); *(.rom.data.*); . = ALIGN(16); diff --git a/src/lib/Config.lb b/src/lib/Config.lb index 259132951f..64682da648 100644 --- a/src/lib/Config.lb +++ b/src/lib/Config.lb @@ -20,7 +20,7 @@ object version.o # Force version.o to recompile every time makedefine .PHONY : version.o -initobject uart8250.c +initobject uart8250.o initobject memset.o initobject memcpy.o initobject memcmp.o diff --git a/src/mainboard/emulation/qemu-x86/Config.lb b/src/mainboard/emulation/qemu-x86/Config.lb index 9af9df3c5c..cabcb2deeb 100644 --- a/src/mainboard/emulation/qemu-x86/Config.lb +++ b/src/mainboard/emulation/qemu-x86/Config.lb @@ -1,3 +1,5 @@ +## we don't use USE_DCACHE_RAM by default +default USE_DCACHE_RAM=0 ## ## Compute the location and size of where this firmware image ## (coreboot plus bootloader) will live in the boot rom chip. @@ -42,60 +44,77 @@ driver mainboard.o if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end - -## -## Build our 16 bit and 32 bit coreboot entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where coreboot is entered) -## -mainboardinit cpu/x86/16bit/reset16.inc -ldscript /cpu/x86/16bit/reset16.lds - -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM +## ALL dependencies for USE_DCACHE_RAM go here. +## That way, later, we can simply yank them if we wish. +## We include the old-fashioned entry code in the ! USE_DCACHE_RAM case. +## we do not use failover yet in this case. This is a work in progress. +if USE_DCACHE_RAM + ## + ## + mainboardinit arch/i386/init/entry.S + mainboardinit arch/i386/init/car.S + ldscript /arch/i386/init/ldscript.ld + + ## The main code for the rom section is called rom.c + initobject rom.o +else + ## + ## Romcc output + ## + makerule ./failover.E + depends "$(MAINBOARD)/failover.c ../romcc" + action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ../romcc" + action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ../romcc" + action "../romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ../romcc" + action "../romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + + ## + ## Build our 16 bit and 32 bit coreboot entry code + ## + mainboardinit cpu/x86/16bit/entry16.inc + mainboardinit cpu/x86/32bit/entry32.inc + ldscript /cpu/x86/16bit/entry16.lds + ldscript /cpu/x86/32bit/entry32.lds + + ## + ## Build our reset vector (This is where coreboot is entered) + ## + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + + ### Should this be in the northbridge code? + mainboardinit arch/i386/lib/cpu_reset.inc + + ## + ## Setup RAM + ## + mainboardinit cpu/x86/fpu/enable_fpu.inc + mainboardinit ./auto.inc + + ## the id string will be in cbfs. We will expect flashrom to parse cbfs for the idstring in future. + ## + ## Include an id string (For safe flashing) + ## + mainboardinit arch/i386/lib/id.inc + ldscript /arch/i386/lib/id.lds + +## +## end of USE_DCACHE_RAM bits. ## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit ./auto.inc +end ## ## Include the secondary Configuration files diff --git a/src/mainboard/emulation/qemu-x86/Options.lb b/src/mainboard/emulation/qemu-x86/Options.lb index be18eb0b49..fdb69ffc47 100644 --- a/src/mainboard/emulation/qemu-x86/Options.lb +++ b/src/mainboard/emulation/qemu-x86/Options.lb @@ -41,7 +41,10 @@ uses CONFIG_PCI_OPTION_ROM_RUN_REALMODE uses CONFIG_CONSOLE_SERIAL8250 uses USE_DCACHE_RAM - +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT +uses CONFIG_USE_PRINTK_IN_CAR uses DEFAULT_CONSOLE_LOGLEVEL uses MAXIMUM_CONSOLE_LOGLEVEL @@ -128,4 +131,12 @@ default CONFIG_ROM_PAYLOAD = 1 default CC="$(CROSS_COMPILE)gcc -m32" default HOSTCC="gcc" +## +## known-good settings for qemu +default DCACHE_RAM_BASE=0x8f000 +default DCACHE_RAM_SIZE=0x1000 + + + + end diff --git a/src/mainboard/emulation/qemu-x86/failover.c b/src/mainboard/emulation/qemu-x86/failover.c index 10bb2f48c1..07c6d1bc27 100644 --- a/src/mainboard/emulation/qemu-x86/failover.c +++ b/src/mainboard/emulation/qemu-x86/failover.c @@ -1,16 +1,14 @@ -#define ASSEMBLY 1 #include <stdint.h> #include <device/pci_def.h> #include <device/pci_ids.h> #include <arch/io.h> #include "arch/romcc_io.h" -#include "pc80/mc146818rtc_early.c" -#include "cpu/x86/lapic/boot_cpu.c" +/* no code inclusion allowed */ +//#include "pc80/mc146818rtc_early.c" +//#include "cpu/x86/lapic/boot_cpu.c" static void main(void) { - /* for now, just always assume failure */ - #if 0 /* Is this a cpu reset? */ if (cpu_init_detected()) { @@ -27,3 +25,4 @@ static void main(void) } #endif } + diff --git a/src/mainboard/emulation/qemu-x86/rom.c b/src/mainboard/emulation/qemu-x86/rom.c new file mode 100644 index 0000000000..65c2644599 --- /dev/null +++ b/src/mainboard/emulation/qemu-x86/rom.c @@ -0,0 +1,30 @@ +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include <cbfs.h> + +/* + */ +void udelay(int usecs) +{ + int i; + for(i = 0; i < usecs; i++) + outb(i&0xff, 0x80); +} + +void main(void) +{ + int i; + void uart_init(void); + void (*start_address)(); + outb(5, 0x80); + + uart_init(); + start_address = cbfs_load_stage("fallback/coreboot_ram"); + start_address(); + +} diff --git a/src/pc80/Config.lb b/src/pc80/Config.lb index 80d9cf46f2..650cabdbbd 100644 --- a/src/pc80/Config.lb +++ b/src/pc80/Config.lb @@ -17,3 +17,7 @@ end dir vga object keyboard.o + +if CONFIG_USE_INIT + initobject serial.o +end diff --git a/src/pc80/serial.c b/src/pc80/serial.c index b05681dcd3..d2079d32ab 100644 --- a/src/pc80/serial.c +++ b/src/pc80/serial.c @@ -96,7 +96,7 @@ static void uart_init(void) /* CONFIG_USE_PRINTK_IN_CAR == 1 */ extern void uart8250_init(unsigned base_port, unsigned divisor, unsigned lcs); -static void uart_init(void) +void uart_init(void) { #if USE_OPTION_TABLE == 1 static const unsigned char divisor[] = { 1,2,3,6,12,24,48,96 }; diff --git a/targets/emulation/qemu-x86/Config-car.lb b/targets/emulation/qemu-x86/Config-car.lb new file mode 100644 index 0000000000..bdb27bc9cd --- /dev/null +++ b/targets/emulation/qemu-x86/Config-car.lb @@ -0,0 +1,26 @@ +# This will make a target directory of ./emulation_qemu-x86 + +target qemu-x86-car +mainboard emulation/qemu-x86 + +option USE_DCACHE_RAM=1 +option CONFIG_USE_INIT=1 +option ROM_SIZE=512*1024 +option CONFIG_USE_INIT=1 +option CONFIG_USE_PRINTK_IN_CAR=1 + +option CC="gcc -m32" + +option HAVE_PIRQ_TABLE=1 +option IRQ_SLOT_COUNT=6 + +romimage "fallback" + option USE_FALLBACK_IMAGE=1 + option ROM_IMAGE_SIZE=0x10000 + option COREBOOT_EXTRA_VERSION="-GRUB2" +# payload /home/stepan/core.img + payload ../payload.elf +end + +buildrom ./coreboot.rom ROM_SIZE "fallback" + diff --git a/targets/emulation/qemu-x86/Config.lb b/targets/emulation/qemu-x86/Config.lb index 03527483d0..91d4413725 100644 --- a/targets/emulation/qemu-x86/Config.lb +++ b/targets/emulation/qemu-x86/Config.lb @@ -9,6 +9,8 @@ option CC="gcc -m32" option HAVE_PIRQ_TABLE=1 option IRQ_SLOT_COUNT=6 +option DEFAULT_CONSOLE_LOGLEVEL=9 +option MAXIMUM_CONSOLE_LOGLEVEL=9 romimage "normal" option COREBOOT_EXTRA_VERSION="-GRUB2" |