summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/southbridge/amd/sb600/early_setup.c10
-rw-r--r--src/southbridge/amd/sb600/lpc.c2
-rw-r--r--src/southbridge/amd/sb600/smbus.c2
-rw-r--r--src/southbridge/amd/sb700/early_setup.c8
-rw-r--r--src/southbridge/amd/sb700/fadt.c4
-rw-r--r--src/southbridge/amd/sb700/hda.c2
-rw-r--r--src/southbridge/amd/sb700/lpc.c2
-rw-r--r--src/southbridge/amd/sb700/sata.c2
-rw-r--r--src/southbridge/amd/sb700/sm.c2
-rw-r--r--src/southbridge/amd/sb700/smbus.c2
-rw-r--r--src/southbridge/amd/sb800/early_setup.c6
-rw-r--r--src/southbridge/amd/sb800/fadt.c4
-rw-r--r--src/southbridge/amd/sb800/hda.c2
-rw-r--r--src/southbridge/amd/sb800/lpc.c4
-rw-r--r--src/southbridge/amd/sb800/sata.c4
-rw-r--r--src/southbridge/amd/sb800/sm.c2
-rw-r--r--src/southbridge/amd/sb800/smbus.c4
-rw-r--r--src/southbridge/amd/sb800/usb.c2
18 files changed, 32 insertions, 32 deletions
diff --git a/src/southbridge/amd/sb600/early_setup.c b/src/southbridge/amd/sb600/early_setup.c
index b6611f6d65..c49420b2b2 100644
--- a/src/southbridge/amd/sb600/early_setup.c
+++ b/src/southbridge/amd/sb600/early_setup.c
@@ -277,7 +277,7 @@ static void sb600_devices_por_init(void)
/* sbPorAtStartOfTblCfg */
/* Set A-Link bridge access address. This address is set at device 14h, function 0, register 0xf0.
- * This is an I/O address. The I/O address must be on 16-byte boundry. */
+ * This is an I/O address. The I/O address must be on 16-byte boundary. */
pci_write_config32(dev, 0xf0, AB_INDX);
/* To enable AB/BIF DMA access, a specific register inside the BIF register space needs to be configured first. */
@@ -301,7 +301,7 @@ static void sb600_devices_por_init(void)
/* set smbus 1, ASF 2.0 (Alert Standard Format), iobase */
pci_write_config16(dev, 0x58, SMBUS_IO_BASE | 0x11);
- /* TODO: I don't know the useage of followed two lines. I copied them from CIM. */
+ /* TODO: I don't know the usage of followed two lines. I copied them from CIM. */
pci_write_config8(dev, 0x0a, 0x1);
pci_write_config8(dev, 0x0b, 0x6);
@@ -379,7 +379,7 @@ static void sb600_devices_por_init(void)
/* Arbiter enable. */
pci_write_config8(dev, 0x43, 0xff);
- /* Set PCDMA request into hight priority list. */
+ /* Set PCDMA request into height priority list. */
/* pci_write_config8(dev, 0x49, 0x1) */ ;
pci_write_config8(dev, 0x40, 0x26);
@@ -483,7 +483,7 @@ static void sb600_pmio_por_init(void)
byte |= 1 << 1;
pmio_write(0x55, byte);
- /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */
+ /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridge */
byte = pmio_read(0x52);
byte |= 1 << 6;
pmio_write(0x52, byte);
@@ -525,7 +525,7 @@ static void sb600_pci_cfg(void)
/* SMBus Device, BDF:0-20-0 */
dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0);
- /* Eable the hidden revision ID, available after A13. */
+ /* Enable the hidden revision ID, available after A13. */
byte = pci_read_config8(dev, 0x70);
byte |= (1 << 8);
pci_write_config8(dev, 0x70, byte);
diff --git a/src/southbridge/amd/sb600/lpc.c b/src/southbridge/amd/sb600/lpc.c
index d8e63b557c..acee69dbae 100644
--- a/src/southbridge/amd/sb600/lpc.c
+++ b/src/southbridge/amd/sb600/lpc.c
@@ -99,7 +99,7 @@ static void sb600_lpc_read_resources(device_t dev)
/**
* @brief Enable resources for children devices
*
- * @param dev the device whos children's resources are to be enabled
+ * @param dev the device whose children's resources are to be enabled
*
*/
static void sb600_lpc_enable_childrens_resources(device_t dev)
diff --git a/src/southbridge/amd/sb600/smbus.c b/src/southbridge/amd/sb600/smbus.c
index 50a2164ae5..86cebccb88 100644
--- a/src/southbridge/amd/sb600/smbus.c
+++ b/src/southbridge/amd/sb600/smbus.c
@@ -185,7 +185,7 @@ static void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val)
tmp |= val;
/* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */
- outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we dont have to do it again. */
+ outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we don't have to do it again. */
outl(tmp, AB_DATA);
}
diff --git a/src/southbridge/amd/sb700/early_setup.c b/src/southbridge/amd/sb700/early_setup.c
index ae329129de..82d51e6053 100644
--- a/src/southbridge/amd/sb700/early_setup.c
+++ b/src/southbridge/amd/sb700/early_setup.c
@@ -252,7 +252,7 @@ void enable_fid_change_on_sb(u32 sbbusn, u32 sbdn)
byte |= 0x20;
pmio_write(0x8f, byte);
- pmio_write(0x8b, 0x01); /* TODO: if the HT Link is 200 MHz, it is 0x0A. It doesnt often happen. */
+ pmio_write(0x8b, 0x01); /* TODO: if the HT Link is 200 MHz, it is 0x0A. It doesn't often happen. */
pmio_write(0x8a, 0x90);
pmio_write(0x88, 0x10);
@@ -374,7 +374,7 @@ static void sb700_devices_por_init(void)
/* sbPorAtStartOfTblCfg */
/* Set A-Link bridge access address. This address is set at device 14h, function 0, register 0xf0.
- * This is an I/O address. The I/O address must be on 16-byte boundry. */
+ * This is an I/O address. The I/O address must be on 16-byte boundary. */
pci_write_config32(dev, 0xf0, AB_INDX);
/* To enable AB/BIF DMA access, a specific register inside the BIF register space needs to be configured first. */
@@ -476,7 +476,7 @@ static void sb700_devices_por_init(void)
pci_write_config8(dev, 0x49, 0xFF);
/* Enable 0x480-0x4bf, 0x4700-0x470B */
byte = pci_read_config8(dev, 0x4A);
- byte |= ((1 << 1) + (1 << 6)); /*0x42, save the configuraion for port 0x80. */
+ byte |= ((1 << 1) + (1 << 6)); /*0x42, save the configuration for port 0x80. */
pci_write_config8(dev, 0x4A, byte);
/* Enable Tpm12_en and Tpm_legacy. I don't know what is its usage and copied from CIM. */
@@ -490,7 +490,7 @@ static void sb700_devices_por_init(void)
/* Arbiter enable. */
pci_write_config8(dev, 0x43, 0xff);
- /* Set PCDMA request into hight priority list. */
+ /* Set PCDMA request into height priority list. */
/* pci_write_config8(dev, 0x49, 0x1) */ ;
pci_write_config8(dev, 0x40, 0x26);
diff --git a/src/southbridge/amd/sb700/fadt.c b/src/southbridge/amd/sb700/fadt.c
index 2a61fae1ab..13e9d3baf5 100644
--- a/src/southbridge/amd/sb700/fadt.c
+++ b/src/southbridge/amd/sb700/fadt.c
@@ -62,7 +62,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK;
fadt->pm_tmr_blk = ACPI_PM_TMR_BLK;
fadt->gpe0_blk = ACPI_GPE0_BLK;
- fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */
+ fadt->gpe1_blk = 0x0000; /* we don't have gpe1 block, do we? */
fadt->pm1_evt_len = 4;
fadt->pm1_cnt_len = 2;
@@ -81,7 +81,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->duty_width = 3;
fadt->day_alrm = 0; /* 0x7d these have to be */
fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */
- fadt->century = 0; /* 0x7f to make rtc alrm work */
+ fadt->century = 0; /* 0x7f to make rtc alarm work */
fadt->iapc_boot_arch = 0x3; /* See table 5-11 */
fadt->flags = 0x0001c1a5;/* 0x25; */
diff --git a/src/southbridge/amd/sb700/hda.c b/src/southbridge/amd/sb700/hda.c
index 61cc5859d8..308b08cc32 100644
--- a/src/southbridge/amd/sb700/hda.c
+++ b/src/southbridge/amd/sb700/hda.c
@@ -53,7 +53,7 @@ static int set_bits(u32 port, u32 mask, u32 val)
dword &= mask;
} while ((dword != val) && --count);
- /* Timeout occured */
+ /* Timeout occurred */
if (!count)
return -1;
return 0;
diff --git a/src/southbridge/amd/sb700/lpc.c b/src/southbridge/amd/sb700/lpc.c
index 173de8369f..26478b7e0a 100644
--- a/src/southbridge/amd/sb700/lpc.c
+++ b/src/southbridge/amd/sb700/lpc.c
@@ -140,7 +140,7 @@ static void sb700_lpc_set_resources(struct device *dev)
pci_dev_set_resources(dev);
- /* Specical case. SPI Base Address. The SpiRomEnable should be set. */
+ /* Special case. SPI Base Address. The SpiRomEnable should be set. */
res = find_resource(dev, 0xA0);
pci_write_config32(dev, 0xA0, res->base | 1 << 1);
}
diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c
index c0e3c0f6aa..7fa924b8a3 100644
--- a/src/southbridge/amd/sb700/sata.c
+++ b/src/southbridge/amd/sb700/sata.c
@@ -38,7 +38,7 @@ static int sata_drive_detect(int portnum, u16 iobar)
if (byte != (0xA0 + 0x10 * (portnum % 2))) {
/* This will happen at the first iteration of this loop
* if the first SATA port is unpopulated and the
- * second SATA port is poulated.
+ * second SATA port is populated.
*/
printk(BIOS_DEBUG, "drive no longer selected after %i ms, "
"retrying init\n", i * 10);
diff --git a/src/southbridge/amd/sb700/sm.c b/src/southbridge/amd/sb700/sm.c
index 8bb5378ff7..5aa4eb102d 100644
--- a/src/southbridge/amd/sb700/sm.c
+++ b/src/southbridge/amd/sb700/sm.c
@@ -181,7 +181,7 @@ static void sm_init(device_t dev)
if ((REV_SB700_A11 == rev) || REV_SB700_A12 == rev) {
byte |= 1 << 0;
}
- /*Set bit2 to 1, enable Io port 60h read/wrire SMi trapping and
+ /*Set bit2 to 1, enable Io port 60h read/write SMi trapping and
*Io port 64h write Smi trapping. conflict with ps2 keyboard
*/
//byte |= 1 << 2 | 1 << 3 | 1 << 4;
diff --git a/src/southbridge/amd/sb700/smbus.c b/src/southbridge/amd/sb700/smbus.c
index 46dad41c0a..9e3844df0d 100644
--- a/src/southbridge/amd/sb700/smbus.c
+++ b/src/southbridge/amd/sb700/smbus.c
@@ -38,7 +38,7 @@ void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val)
tmp |= val;
/* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */
- outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we dont have to do it again. */
+ outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we don't have to do it again. */
outl(tmp, AB_DATA);
reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL;
}
diff --git a/src/southbridge/amd/sb800/early_setup.c b/src/southbridge/amd/sb800/early_setup.c
index 5244490fc3..2b488d937d 100644
--- a/src/southbridge/amd/sb800/early_setup.c
+++ b/src/southbridge/amd/sb800/early_setup.c
@@ -382,7 +382,7 @@ static void sb800_devices_por_init(void)
/* sbPorAtStartOfTblCfg */
/* rpr 4.1.Set A-Link bridge access address.
- * This is an I/O address. The I/O address must be on 16-byte boundry. */
+ * This is an I/O address. The I/O address must be on 16-byte boundary. */
//pci_write_config32(dev, 0xf0, AB_INDX);
pmio_write(0xE0, AB_INDX & 0xFF);
pmio_write(0xE1, (AB_INDX >> 8) & 0xFF);
@@ -471,7 +471,7 @@ static void sb800_devices_por_init(void)
/* Arbiter enable. */
pci_write_config8(dev, 0x43, 0xff);
- /* Set PCDMA request into hight priority list. */
+ /* Set PCDMA request into height priority list. */
/* pci_write_config8(dev, 0x49, 0x1) */ ;
pci_write_config8(dev, 0x40, 0x26);
@@ -572,7 +572,7 @@ static void sb800_pci_cfg(void)
/* LPC Device, BDF:0-20-3 */
/* The code below is ported from old chipset. It is not
- * metioned in RPR. But I keep them. The registers and the
+ * Mentioned in RPR. But I keep them. The registers and the
* comments are compatible. */
dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
/* Enabling LPC DMA function. */
diff --git a/src/southbridge/amd/sb800/fadt.c b/src/southbridge/amd/sb800/fadt.c
index b37d01d1ad..9e120d5a01 100644
--- a/src/southbridge/amd/sb800/fadt.c
+++ b/src/southbridge/amd/sb800/fadt.c
@@ -62,7 +62,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK;
fadt->pm_tmr_blk = ACPI_PM_TMR_BLK;
fadt->gpe0_blk = ACPI_GPE0_BLK;
- fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */
+ fadt->gpe1_blk = 0x0000; /* we don't have gpe1 block, do we? */
fadt->pm1_evt_len = 4;
fadt->pm1_cnt_len = 2;
@@ -81,7 +81,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->duty_width = 3;
fadt->day_alrm = 0; /* 0x7d these have to be */
fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */
- fadt->century = 0; /* 0x7f to make rtc alrm work */
+ fadt->century = 0; /* 0x7f to make rtc alarm work */
fadt->iapc_boot_arch = 0x3; /* See table 5-11 */
fadt->flags = 0x0001c1a5;/* 0x25; */
diff --git a/src/southbridge/amd/sb800/hda.c b/src/southbridge/amd/sb800/hda.c
index ad8f80f0d8..5265684f29 100644
--- a/src/southbridge/amd/sb800/hda.c
+++ b/src/southbridge/amd/sb800/hda.c
@@ -53,7 +53,7 @@ static int set_bits(u32 port, u32 mask, u32 val)
dword &= mask;
} while ((dword != val) && --count);
- /* Timeout occured */
+ /* Timeout occurred */
if (!count)
return -1;
return 0;
diff --git a/src/southbridge/amd/sb800/lpc.c b/src/southbridge/amd/sb800/lpc.c
index 314a963e2a..f862a97ea4 100644
--- a/src/southbridge/amd/sb800/lpc.c
+++ b/src/southbridge/amd/sb800/lpc.c
@@ -113,7 +113,7 @@ static void sb800_lpc_set_resources(struct device *dev)
pci_dev_set_resources(dev);
- /* Specical case. SPI Base Address. The SpiRomEnable should be set. */
+ /* Special case. SPI Base Address. The SpiRomEnable should be set. */
res = find_resource(dev, 0xA0);
pci_write_config32(dev, 0xA0, res->base | 1 << 1);
@@ -122,7 +122,7 @@ static void sb800_lpc_set_resources(struct device *dev)
/**
* @brief Enable resources for children devices
*
- * @param dev the device whos children's resources are to be enabled
+ * @param dev the device whose children's resources are to be enabled
*
*/
static void sb800_lpc_enable_childrens_resources(device_t dev)
diff --git a/src/southbridge/amd/sb800/sata.c b/src/southbridge/amd/sb800/sata.c
index bd35e50fe7..a1aa6e051e 100644
--- a/src/southbridge/amd/sb800/sata.c
+++ b/src/southbridge/amd/sb800/sata.c
@@ -38,7 +38,7 @@ static int sata_drive_detect(int portnum, u16 iobar)
if (byte != (0xA0 + 0x10 * (portnum % 2))) {
/* This will happen at the first iteration of this loop
* if the first SATA port is unpopulated and the
- * second SATA port is poulated.
+ * second SATA port is populated.
*/
printk(BIOS_DEBUG, "drive no longer selected after %i ms, "
"retrying init\n", i * 10);
@@ -97,7 +97,7 @@ static void sata_init(struct device *dev)
/* get rev_id */
rev_id = pci_read_config8(sm_dev, 0x08) - 0x2F;
- /* get base addresss */
+ /* get base address */
sata_bar5 = pci_read_config32(dev, 0x24) & ~0x3FF;
sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7;
sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3;
diff --git a/src/southbridge/amd/sb800/sm.c b/src/southbridge/amd/sb800/sm.c
index acdfb090a6..662a82e4ef 100644
--- a/src/southbridge/amd/sb800/sm.c
+++ b/src/southbridge/amd/sb800/sm.c
@@ -313,7 +313,7 @@ static void sb800_sm_set_resources(struct device *dev)
pci_dev_set_resources(dev);
- /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */
+ /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridge */
byte = pm_ioread(0x52);
byte |= 1 << 6;
pm_iowrite(0x52, byte);
diff --git a/src/southbridge/amd/sb800/smbus.c b/src/southbridge/amd/sb800/smbus.c
index 5c4152a438..852e73b7aa 100644
--- a/src/southbridge/amd/sb800/smbus.c
+++ b/src/southbridge/amd/sb800/smbus.c
@@ -196,7 +196,7 @@ void alink_ab_indx(u32 reg_space, u32 reg_addr,
tmp |= val;
/* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | reg_addr); */
- outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); /* probably we dont have to do it again. */
+ outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); /* probably we don't have to do it again. */
outl(tmp, AB_DATA);
outl(0, AB_INDX);
}
@@ -218,7 +218,7 @@ void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port,
tmp |= val;
//printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | (port&3) << 24 | reg_addr);
- outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); /* probably we dont have to do it again. */
+ outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); /* probably we don't have to do it again. */
outl(tmp, AB_DATA);
outl(0, AB_INDX);
}
diff --git a/src/southbridge/amd/sb800/usb.c b/src/southbridge/amd/sb800/usb.c
index 9304344c6e..55be7b88f9 100644
--- a/src/southbridge/amd/sb800/usb.c
+++ b/src/southbridge/amd/sb800/usb.c
@@ -71,7 +71,7 @@ static void usb_init2(struct device *dev)
usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF;
printk(BIOS_INFO, "usb2_bar0=0x%x\n", usb2_bar0);
- /* RPR7.3 Enables the USB PHY auto calibration resister to match 45ohm resistence */
+ /* RPR7.3 Enables the USB PHY auto calibration resister to match 45ohm resistance */
dword = 0x00020F00;
write32(usb2_bar0 + 0xC0, dword);
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 19:33:19 +0000