summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/cubietech/Kconfig17
-rw-r--r--src/mainboard/cubietech/Kconfig.name2
-rw-r--r--src/mainboard/cubietech/cubieboard/Kconfig30
-rw-r--r--src/mainboard/cubietech/cubieboard/Kconfig.name2
-rw-r--r--src/mainboard/cubietech/cubieboard/Makefile.inc6
-rw-r--r--src/mainboard/cubietech/cubieboard/board_info.txt1
-rw-r--r--src/mainboard/cubietech/cubieboard/bootblock.c157
-rw-r--r--src/mainboard/cubietech/cubieboard/devicetree.cb12
-rw-r--r--src/mainboard/cubietech/cubieboard/memlayout.ld34
-rw-r--r--src/mainboard/cubietech/cubieboard/romstage.c101
10 files changed, 0 insertions, 362 deletions
diff --git a/src/mainboard/cubietech/Kconfig b/src/mainboard/cubietech/Kconfig
deleted file mode 100644
index c0e9cc1357..0000000000
--- a/src/mainboard/cubietech/Kconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-if VENDOR_CUBIETECH
-
-# Auto select common options
-choice
- prompt "Mainboard model"
-
-source "src/mainboard/cubietech/*/Kconfig.name"
-
-endchoice
-
-source "src/mainboard/cubietech/*/Kconfig"
-
-config MAINBOARD_VENDOR
- string
- default "Cubietech"
-
-endif # VENDOR_CUBIETECH
diff --git a/src/mainboard/cubietech/Kconfig.name b/src/mainboard/cubietech/Kconfig.name
deleted file mode 100644
index 0ebc0885be..0000000000
--- a/src/mainboard/cubietech/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config VENDOR_CUBIETECH
- bool "Cubietech"
diff --git a/src/mainboard/cubietech/cubieboard/Kconfig b/src/mainboard/cubietech/cubieboard/Kconfig
deleted file mode 100644
index 9ef5797044..0000000000
--- a/src/mainboard/cubietech/cubieboard/Kconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-if BOARD_CUBIETECH_CUBIEBOARD
-
-config BOARD_SPECIFIC_OPTIONS
- def_bool y
- select CPU_ALLWINNER_A10
- select BOARD_ROMSIZE_KB_4096
- select DRIVER_XPOWERS_AXP209
- select MISSING_BOARD_RESET
-
-config MAINBOARD_DIR
- string
- default cubietech/cubieboard
-
-config MAINBOARD_PART_NUMBER
- string
- default "Cubieboard A10"
-
-config MAX_CPUS
- int
- default 1
-
-config DRAM_SIZE_MB
- int
- default 1024
-
-config UART_FOR_CONSOLE
- int
- default 0
-
-endif # BOARD_CUBIETECH_CUBIEBOARD
diff --git a/src/mainboard/cubietech/cubieboard/Kconfig.name b/src/mainboard/cubietech/cubieboard/Kconfig.name
deleted file mode 100644
index 3a011819b4..0000000000
--- a/src/mainboard/cubietech/cubieboard/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_CUBIETECH_CUBIEBOARD
- bool "Cubieboard"
diff --git a/src/mainboard/cubietech/cubieboard/Makefile.inc b/src/mainboard/cubietech/cubieboard/Makefile.inc
deleted file mode 100644
index f3a6de237d..0000000000
--- a/src/mainboard/cubietech/cubieboard/Makefile.inc
+++ /dev/null
@@ -1,6 +0,0 @@
-bootblock-y += bootblock.c
-romstage-y += romstage.c
-
-bootblock-y += memlayout.ld
-romstage-y += memlayout.ld
-ramstage-y += memlayout.ld
diff --git a/src/mainboard/cubietech/cubieboard/board_info.txt b/src/mainboard/cubietech/cubieboard/board_info.txt
deleted file mode 100644
index c67b641a94..0000000000
--- a/src/mainboard/cubietech/cubieboard/board_info.txt
+++ /dev/null
@@ -1 +0,0 @@
-Category: sbc
diff --git a/src/mainboard/cubietech/cubieboard/bootblock.c b/src/mainboard/cubietech/cubieboard/bootblock.c
deleted file mode 100644
index 05e3847d39..0000000000
--- a/src/mainboard/cubietech/cubieboard/bootblock.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
- * Minimal bootblock for Cubieboard
- * It sets up CPU clock, and enables the bootblock console.
- */
-
-#include <device/mmio.h>
-#include <bootblock_common.h>
-#include <console/uart.h>
-#include <delay.h>
-#include <cpu/allwinner/a10/gpio.h>
-#include <cpu/allwinner/a10/clock.h>
-#include <cpu/allwinner/a10/dramc.h>
-
-#define CPU_AHB_APB0_DEFAULT \
- CPU_CLK_SRC_OSC24M \
- | APB0_DIV_1 \
- | AHB_DIV_2 \
- | AXI_DIV_1
-
-#define GPH_STATUS_LEDS (1 << 20) | (1 << 21)
-#define GPH_LED1_PIN_NO 21
-#define GPH_LED2_PIN_NO 20
-
-#define GPB_UART0_FUNC 2
-#define GPB_UART0_PINS ((1 << 22) | (1 << 23))
-
-#define GPF_SD0_FUNC 2
-#define GPF_SD0_PINS 0x3f /* PF0 thru PF5 */
-#define GPH1_SD0_DET_FUNC 5
-
-static void cubieboard_set_sys_clock(void)
-{
- u32 reg32;
- struct a10_ccm *ccm = (void *)A1X_CCM_BASE;
-
- /* Switch CPU clock to main oscillator */
- write32(&ccm->cpu_ahb_apb0_cfg, CPU_AHB_APB0_DEFAULT);
-
- /* Configure the PLL1. The value is the same one used by u-boot
- * P = 1, N = 16, K = 1, M = 1 --> Output = 384 MHz
- */
- write32(&ccm->pll1_cfg, 0xa1005000);
-
- /* FIXME: Delay to wait for PLL to lock */
- u32 wait = 1000;
- while (--wait);
-
- /* Switch CPU to PLL clock */
- reg32 = read32(&ccm->cpu_ahb_apb0_cfg);
- reg32 &= ~CPU_CLK_SRC_MASK;
- reg32 |= CPU_CLK_SRC_PLL1;
- write32(&ccm->cpu_ahb_apb0_cfg, reg32);
-}
-
-static void cubieboard_setup_clocks(void)
-{
- struct a10_ccm *ccm = (void *)A1X_CCM_BASE;
-
- cubieboard_set_sys_clock();
- /* Configure the clock source for APB1. This drives our UART */
- write32(&ccm->apb1_clk_div_cfg,
- APB1_CLK_SRC_OSC24M | APB1_RAT_N(0) | APB1_RAT_M(0));
-
- /* Configure the clock for SD0 */
- write32(&ccm->sd0_clk_cfg,
- SDx_CLK_GATE | SDx_CLK_SRC_OSC24M | SDx_RAT_EXP_N(0) | SDx_RAT_M(1));
-
- /* Enable clock to SD0 */
- a1x_periph_clock_enable(A1X_CLKEN_MMC0);
-
-}
-
-static void cubieboard_setup_gpios(void)
-{
- /* Mux Status LED pins */
- gpio_set_multipin_func(GPH, GPH_STATUS_LEDS, GPIO_PIN_FUNC_OUTPUT);
- /* Turn on green LED to let user know we're executing coreboot code */
- gpio_set(GPH, GPH_LED2_PIN_NO);
-
- /* Mux UART pins */
- gpio_set_multipin_func(GPB, GPB_UART0_PINS, GPB_UART0_FUNC);
-
- /* Mux SD pins */
- gpio_set_multipin_func(GPF, GPF_SD0_PINS, GPF_SD0_FUNC);
- gpio_set_pin_func(GPH, 1, GPH1_SD0_DET_FUNC);
-}
-
-static void cubieboard_enable_uart(void)
-{
- a1x_periph_clock_enable(A1X_CLKEN_UART0);
-}
-
-static void cubieboard_raminit(void)
-{
- struct dram_para dram_para = {
- .clock = 480,
- .type = 3,
- .rank_num = 1,
- .density = 4096,
- .io_width = 16,
- .bus_width = 32,
- .cas = 6,
- .zq = 123,
- .odt_en = 0,
- .size = 1024,
- .tpr0 = 0x30926692,
- .tpr1 = 0x1090,
- .tpr2 = 0x1a0c8,
- .tpr3 = 0,
- .tpr4 = 0,
- .tpr5 = 0,
- .emr1 = 0,
- .emr2 = 0,
- .emr3 = 0,
- };
-
- dramc_init(&dram_para);
-
- /* FIXME: ram_check does not compile for ARM,
- * and we didn't init console yet
- */
- ////void *const test_base = (void *)A1X_DRAM_BASE;
- ////ram_check((u32)test_base, (u32)test_base + 0x1000);
-}
-
-void bootblock_mainboard_early_init(void)
-{
- /* A10 Timer init uses the 24MHz clock, not PLLs, so we can init it very
- * early on to get udelay, which is used almost everywhere else.
- */
- init_timer();
-
- cubieboard_setup_clocks();
- cubieboard_setup_gpios();
- cubieboard_enable_uart();
-}
-
-void bootblock_mainboard_init(void)
-{
- cubieboard_raminit();
-}
diff --git a/src/mainboard/cubietech/cubieboard/devicetree.cb b/src/mainboard/cubietech/cubieboard/devicetree.cb
deleted file mode 100644
index 033a89e628..0000000000
--- a/src/mainboard/cubietech/cubieboard/devicetree.cb
+++ /dev/null
@@ -1,12 +0,0 @@
-chip cpu/allwinner/a10
- device cpu_cluster 0 on end
-
- chip drivers/xpowers/axp209 # AXP209 is on I2C 0
- device i2c 0x34 on end
- register "dcdc2_voltage_mv" = "1400" # Vcore
- register "dcdc3_voltage_mv" = "1250" # DLL Vdd
- register "ldo2_voltage_mv" = "3000" # AVCC
- register "ldo3_voltage_mv" = "2800" # NC?
- register "ldo4_voltage_mv" = "2800" # CSI1-IO-2V8
- end
-end
diff --git a/src/mainboard/cubietech/cubieboard/memlayout.ld b/src/mainboard/cubietech/cubieboard/memlayout.ld
deleted file mode 100644
index b9bf10b8f6..0000000000
--- a/src/mainboard/cubietech/cubieboard/memlayout.ld
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <memlayout.h>
-
-#include <arch/header.ld>
-
-SECTIONS
-{
- SRAM_START(0x0)
- /* eGON.BT0: 32 bytes */
- BOOTBLOCK(0x20, 0x5fa0)
- STACK(0x6000, 8K)
- SRAM_END(0x8000)
-
- DRAM_START(0x40000000)
- RAMSTAGE(0x40000000, 16M)
- ROMSTAGE(0x41000000, 108K)
-
- /* TODO: Implement MMU support and move TTB to a better location. */
- TTB(0x42000000, 16K)
-}
diff --git a/src/mainboard/cubietech/cubieboard/romstage.c b/src/mainboard/cubietech/cubieboard/romstage.c
deleted file mode 100644
index bfb5e029d6..0000000000
--- a/src/mainboard/cubietech/cubieboard/romstage.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
- * Basic romstage for Cubieboard
- *
- * Set up system voltages, then increase the CPU clock, before turning control
- * to ramstage. The CPU VDD needs to be properly set before it can run at full
- * speed. Setting the CPU at full speed helps lzma-decompress ramstage a lot
- * faster.
- */
-
-#include <console/console.h>
-#include <cpu/allwinner/a10/clock.h>
-#include <cpu/allwinner/a10/gpio.h>
-#include <cpu/allwinner/a10/twi.h>
-#include <program_loading.h>
-#include <device/device.h>
-#include <drivers/xpowers/axp209/axp209.h>
-#include <drivers/xpowers/axp209/chip.h>
-#include <types.h>
-
-#define GPB_TWI0_FUNC 2
-#define GPB_TWI0_PINS ((1 << 0) | (1 << 1))
-
-#define AXP209_BUS 0
-
-static enum cb_err cubieboard_setup_power(void)
-{
- enum cb_err err;
- const struct device * pmu;
- const struct drivers_xpowers_axp209_config *cfg;
-
- /* Find the AXP209 in devicetree */
- pmu = dev_find_slot_on_smbus(AXP209_BUS, AXP209_I2C_ADDR);
- if (!pmu) {
- printk(BIOS_ERR, "AXP209 not found in devicetree.cb\n");
- return CB_ERR;
- }
-
- cfg = pmu->chip_info;
-
- /* Mux TWI0 pins */
- gpio_set_multipin_func(GPB, GPB_TWI0_PINS, GPB_TWI0_FUNC);
- /* Enable TWI0 */
- a1x_periph_clock_enable(A1X_CLKEN_TWI0);
- a1x_twi_init(AXP209_BUS, 400000);
-
- if ((err = axp209_init(AXP209_BUS)) != CB_SUCCESS) {
- printk(BIOS_ERR, "PMU initialization failed\n");
- return err;
- }
-
- if ((err = axp209_set_voltages(AXP209_BUS, cfg)) != CB_SUCCESS) {
- printk(BIOS_WARNING, "Power setup incomplete: "
- "CPU may hang when increasing clock\n");
- return err;
- }
-
- printk(BIOS_SPEW, "VDD CPU (DCDC2): %imv\n", cfg->dcdc2_voltage_mv);
- printk(BIOS_SPEW, "VDD DLL (DCDC3): %imv\n", cfg->dcdc3_voltage_mv);
- printk(BIOS_SPEW, "AVCC (LDO2) : %imv\n", cfg->ldo2_voltage_mv);
- printk(BIOS_SPEW, "CSI1-IO (LDO4) : %imv\n", cfg->ldo4_voltage_mv);
- printk(BIOS_SPEW, "(LDO3) : %imv\n", cfg->ldo3_voltage_mv);
-
- return CB_SUCCESS;
-}
-
-void main(void)
-{
- enum cb_err err;
-
- console_init();
-
- /* Configure power rails */
- err = cubieboard_setup_power();
-
- if (err == CB_SUCCESS) {
- /* TODO: Get this clock from devicetree.cb */
- a1x_set_cpu_clock(1008);
- } else {
- /* cubieboard_setup_power() prints more details */
- printk(BIOS_WARNING, "Will run CPU at reduced speed\n");
- a1x_set_cpu_clock(384);
- }
-
- run_ramstage();
-}