diff options
-rw-r--r-- | src/mainboard/dell/s1850/Config.lb | 4 | ||||
-rw-r--r-- | src/mainboard/dell/s1850/Options.lb | 2 | ||||
-rw-r--r-- | src/mainboard/dell/s1850/auto.c | 10 | ||||
-rw-r--r-- | src/mainboard/dell/s1850/irq_tables.c | 73 | ||||
-rw-r--r-- | targets/dell/s1850/Config.lb | 17 |
5 files changed, 56 insertions, 50 deletions
diff --git a/src/mainboard/dell/s1850/Config.lb b/src/mainboard/dell/s1850/Config.lb index 645e8b916d..4eb4a026be 100644 --- a/src/mainboard/dell/s1850/Config.lb +++ b/src/mainboard/dell/s1850/Config.lb @@ -138,8 +138,8 @@ chip northbridge/intel/e7520 # mch device pci 1f.2 on end device pci 1f.3 on end - register "pirq_a_d" = "0x8a07030b" - register "pirq_e_h" = "0x85808080" + register "pirq_a_d" = "0x8e8b8f80" + register "pirq_e_h" = "0x80808080" end device pci 00.0 on end device pci 00.1 on end diff --git a/src/mainboard/dell/s1850/Options.lb b/src/mainboard/dell/s1850/Options.lb index 72ad796059..fe5e72eb37 100644 --- a/src/mainboard/dell/s1850/Options.lb +++ b/src/mainboard/dell/s1850/Options.lb @@ -84,7 +84,7 @@ default CONFIG_HAVE_HARD_RESET=1 ## Build code to export a programmable irq routing table ## default CONFIG_HAVE_PIRQ_TABLE=1 -default CONFIG_IRQ_SLOT_COUNT=16 +default CONFIG_IRQ_SLOT_COUNT=9 ## ## Build code to export an x86 MP table diff --git a/src/mainboard/dell/s1850/auto.c b/src/mainboard/dell/s1850/auto.c index a80ba60b5b..a32df1ec4d 100644 --- a/src/mainboard/dell/s1850/auto.c +++ b/src/mainboard/dell/s1850/auto.c @@ -123,13 +123,13 @@ static void main(unsigned long bist) #if 0 display_cpuid_update_microcode(); #endif -#if 0 +#if 1 print_pci_devices(); #endif #if 1 enable_smbus(); #endif -#if 0 +#if 1 // dump_spd_registers(&cpu[0]); int i; for(i = 0; i < 1; i++) { @@ -141,15 +141,15 @@ static void main(unsigned long bist) mainboard_set_e7520_leds(); // memreset_setup(); sdram_initialize(ARRAY_SIZE(mch), mch); -#if 0 +#if 1 dump_pci_devices(); #endif -#if 0 +#if 1 dump_pci_device(PCI_DEV(0, 0x00, 0)); dump_bar14(PCI_DEV(0, 0x00, 0)); #endif -#if 0 // temporarily disabled +#if 1 // temporarily disabled /* Check the first 1M */ // ram_check(0x00000000, 0x000100000); // ram_check(0x00000000, 0x000a0000); diff --git a/src/mainboard/dell/s1850/irq_tables.c b/src/mainboard/dell/s1850/irq_tables.c index dc5514bbac..dab67e8a29 100644 --- a/src/mainboard/dell/s1850/irq_tables.c +++ b/src/mainboard/dell/s1850/irq_tables.c @@ -1,48 +1,53 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up +/* + * This file is part of the coreboot project. * - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ + * Copyright (C) 2008 VIA Technologies, Inc. + * (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ #include <arch/pirq_routing.h> const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*17, /* there can be total 17 devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x1f<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x24d0, /* Device */ - 0, /* Crap (miniport) */ + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * 9,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x11 << 3) | 0x0, /* Interrupt router device */ + 0xc20, /* IRQs devoted exclusively to PCI usage */ + 0x1106, /* Vendor */ + 0x596, /* Device */ + 0, /* Crap (miniport) */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xc4, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + 0x66, /* Checksum */ { /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x02<<3)|0x0, {{0x60, 0xccf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x00,(0x04<<3)|0x0, {{0x60, 0xccf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x00,(0x05<<3)|0x0, {{0x60, 0xccf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x00,(0x06<<3)|0x0, {{0x60, 0xccf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x05,(0x00<<3)|0x0, {{0x60, 0xccf8}, {0x61, 0xccf8}, {0x62, 0xccf8}, {0x63, 0x0ccf8}}, 0x0, 0x0}, - {0x01,(0x00<<3)|0x0, {{0x60, 0xccf8}, {0x61, 0xccf8}, {0x62, 0xccf8}, {0x63, 0x0ccf8}}, 0x0, 0x0}, - {0x00,(0x1d<<3)|0x0, {{0x60, 0xccf8}, {0x63, 0xccf8}, {0x62, 0xccf8}, {0x6b, 0x0ccf8}}, 0x0, 0x0}, - {0x09,(0x05<<3)|0x0, {{0x68, 0xccf8}, {0x69, 0xccf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x09,(0x06<<3)|0x0, {{0x6b, 0xccf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x09,(0x0d<<3)|0x0, {{0x62, 0xccf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x09,(0x03<<3)|0x0, {{0x63, 0xccf8}, {0x63, 0xccf8}, {0x63, 0xccf8}, {0x63, 0x0ccf8}}, 0x0, 0x0}, - {0x06,(0x07<<3)|0x0, {{0x60, 0xccf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x07,(0x08<<3)|0x0, {{0x61, 0xccf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x02,(0x05<<3)|0x0, {{0x62, 0xccf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, - {0x04,(0x00<<3)|0x0, {{0x60, 0xccf8}, {0x61, 0xccf8}, {0x62, 0xccf8}, {0x63, 0x0ccf8}}, 0x1, 0x0}, - {0x08,(0x00<<3)|0x0, {{0x60, 0xccf8}, {0x61, 0xccf8}, {0x62, 0xccf8}, {0x63, 0x0ccf8}}, 0x2, 0x0}, - {0x02,(0x0e<<3)|0x0, {{0x62, 0xccf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, + {0x00,(0x14<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x0d<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x2, 0x0}, + {0x00,(0x0e<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x3, 0x0}, + {0x00,(0x13<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0x0deb8}}, 0x4, 0x0}, + {0x00,(0x11<<3)|0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x0f<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x10<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x12<<3)|0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, } }; unsigned long write_pirq_routing_table(unsigned long addr) { - return copy_pirq_routing_table(addr); + return copy_pirq_routing_table(addr); } - diff --git a/targets/dell/s1850/Config.lb b/targets/dell/s1850/Config.lb index 75eb19d655..bf22a185dc 100644 --- a/targets/dell/s1850/Config.lb +++ b/targets/dell/s1850/Config.lb @@ -5,13 +5,13 @@ option CONFIG_ROM_SIZE=1024*1024 option CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9 option CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9 -romimage "normal" - option CONFIG_USE_FALLBACK_IMAGE=0 - option CONFIG_ROM_IMAGE_SIZE=0x16000 - option COREBOOT_EXTRA_VERSION=".0Normal" -# payload ../../../payloads/filo.elf - payload /tmp/filo.elf -end +#romimage "normal" +# option CONFIG_USE_FALLBACK_IMAGE=0 +# option CONFIG_ROM_IMAGE_SIZE=0x16000 +# option COREBOOT_EXTRA_VERSION=".0Normal" +## payload ../../../payloads/filo.elf +# payload /tmp/filo.elf +#end romimage "fallback" option CONFIG_USE_FALLBACK_IMAGE=1 @@ -21,4 +21,5 @@ romimage "fallback" payload /tmp/filo.elf end -buildrom ./coreboot.rom CONFIG_ROM_SIZE "normal" "fallback" +#buildrom ./coreboot.rom CONFIG_ROM_SIZE "normal" "fallback" +buildrom ./coreboot.rom CONFIG_ROM_SIZE "fallback" |