summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/arch/i386/include/arch/romcc_io.h16
-rw-r--r--src/arch/i386/lib/console.c9
-rw-r--r--src/mainboard/amd/solo/auto.c1670
-rw-r--r--src/mainboard/amd/solo/failover.c26
-rw-r--r--src/northbridge/amd/amdk8/coherent_ht.c591
-rw-r--r--src/northbridge/amd/amdk8/early_ht.c49
-rw-r--r--src/northbridge/amd/amdk8/raminit.c792
-rw-r--r--src/pc80/mc146818rtc_early.c84
-rw-r--r--src/southbridge/amd/amd8111/amd8111_early_smbus.c108
-rw-r--r--src/southbridge/amd/amd8111/amd8111_enable_rom.c18
-rw-r--r--util/romcc/Makefile5
-rw-r--r--util/romcc/romcc.c63
-rw-r--r--util/romcc/tests/simple_test31.c16
13 files changed, 1820 insertions, 1627 deletions
diff --git a/src/arch/i386/include/arch/romcc_io.h b/src/arch/i386/include/arch/romcc_io.h
index 66e6dc07cd..8366a4d529 100644
--- a/src/arch/i386/include/arch/romcc_io.h
+++ b/src/arch/i386/include/arch/romcc_io.h
@@ -53,6 +53,9 @@ static void wrmsr(unsigned long index, msr_t msr)
(((FN) & 0x07) << 8) | \
((WHERE) & 0xFF))
+#define PCI_ID(VENDOR_ID, DEVICE_ID) \
+ ((((DEVICE_ID) & 0xFFFF) << 16) | ((VENDOR_ID) & 0xFFFF))
+
static unsigned char pci_read_config8(unsigned addr)
{
outl(0x80000000 | (addr & ~3), 0xCF8);
@@ -88,3 +91,16 @@ static void pci_write_config32(unsigned addr, unsigned int value)
outl(0x80000000 | (addr & ~3), 0xCF8);
outl(value, 0xCFC);
}
+
+static unsigned pci_locate_device(unsigned pci_id, unsigned addr)
+{
+ addr &= ~0xff;
+ for(; addr <= PCI_ADDR(255, 31, 7, 0); addr += PCI_ADDR(0,0,1,0)) {
+ unsigned int id;
+ id = pci_read_config32(addr);
+ if (id == pci_id) {
+ return addr;
+ }
+ }
+ return ~0U;
+}
diff --git a/src/arch/i386/lib/console.c b/src/arch/i386/lib/console.c
index 83502eafd9..f3594e9786 100644
--- a/src/arch/i386/lib/console.c
+++ b/src/arch/i386/lib/console.c
@@ -136,3 +136,12 @@ static void console_init(void)
" starting...\r\n";
print_info(console_test);
}
+
+
+static void die(const char *str)
+{
+ print_emerg(str);
+ do {
+ hlt();
+ } while(1);
+}
diff --git a/src/mainboard/amd/solo/auto.c b/src/mainboard/amd/solo/auto.c
index c2d5b88190..906c3f9137 100644
--- a/src/mainboard/amd/solo/auto.c
+++ b/src/mainboard/amd/solo/auto.c
@@ -5,807 +5,10 @@
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
-
-static void die(const char *str)
-{
- print_emerg(str);
- do {
- hlt();
- } while(1);
-}
-
-#define MEMORY_512MB 0 /* SuSE Solo configuration */
-#define MEMORY_1024MB 1 /* LNXI Solo configuration */
-
-static void sdram_set_registers(void)
-{
- static const unsigned int register_values[] = {
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
-#endif
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
-#endif
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
- PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
-#endif
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration regin i
- */
- PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-
- /* DRAM CS Base Address i Registers
- * F2:0x40 i = 0
- * F2:0x44 i = 1
- * F2:0x48 i = 2
- * F2:0x4C i = 3
- * F2:0x50 i = 4
- * F2:0x54 i = 5
- * F2:0x58 i = 6
- * F2:0x5C i = 7
- * [ 0: 0] Chip-Select Bank Enable
- * 0 = Bank Disabled
- * 1 = Bank Enabled
- * [ 8: 1] Reserved
- * [15: 9] Base Address (19-13)
- * An optimization used when all DIMM are the same size...
- * [20:16] Reserved
- * [31:21] Base Address (35-25)
- * This field defines the top 11 addresses bit of a 40-bit
- * address that define the memory address space. These
- * bits decode 32-MByte blocks of memory.
- */
- PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000001,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x01000001,
- PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x02000001,
- PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x03000001,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00800001,
- PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x01000001,
- PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x01800001,
-#endif
- PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000,
- PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000,
- PCI_ADDR(0, 0x18, 2, 0x58), 0x001f01fe, 0x00000000,
- PCI_ADDR(0, 0x18, 2, 0x5C), 0x001f01fe, 0x00000000,
- /* DRAM CS Mask Address i Registers
- * F2:0x60 i = 0
- * F2:0x64 i = 1
- * F2:0x68 i = 2
- * F2:0x6C i = 3
- * F2:0x70 i = 4
- * F2:0x74 i = 5
- * F2:0x78 i = 6
- * F2:0x7C i = 7
- * Select bits to exclude from comparison with the DRAM Base address register.
- * [ 8: 0] Reserved
- * [15: 9] Address Mask (19-13)
- * Address to be excluded from the optimized case
- * [20:16] Reserved
- * [29:21] Address Mask (33-25)
- * The bits with an address mask of 1 are excluded from address comparison
- * [31:30] Reserved
- *
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00e0fe00,
- PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00e0fe00,
- PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00e0fe00,
- PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00e0fe00,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x0060fe00,
- PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x0060fe00,
- PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x0060fe00,
- PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x0060fe00,
-#endif
- PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000,
- PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000,
- PCI_ADDR(0, 0x18, 2, 0x78), 0xC01f01ff, 0x00000000,
- PCI_ADDR(0, 0x18, 2, 0x7C), 0xC01f01ff, 0x00000000,
- /* DRAM Bank Address Mapping Register
- * F2:0x80
- * Specify the memory module size
- * [ 2: 0] CS1/0
- * [ 6: 4] CS3/2
- * [10: 8] CS5/4
- * [14:12] CS7/6
- * 000 = 32Mbyte (Rows = 12 & Col = 8)
- * 001 = 64Mbyte (Rows = 12 & Col = 9)
- * 010 = 128Mbyte (Rows = 13 & Col = 9)|(Rows = 12 & Col = 10)
- * 011 = 256Mbyte (Rows = 13 & Col = 10)|(Rows = 12 & Col = 11)
- * 100 = 512Mbyte (Rows = 13 & Col = 11)|(Rows = 14 & Col = 10)
- * 101 = 1Gbyte (Rows = 14 & Col = 11)|(Rows = 13 & Col = 12)
- * 110 = 2Gbyte (Rows = 14 & Col = 12)
- * 111 = reserved
- * [ 3: 3] Reserved
- * [ 7: 7] Reserved
- * [11:11] Reserved
- * [31:15]
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000033,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000022,
-#endif
- /* DRAM Timing Low Register
- * F2:0x88
- * [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid)
- * 000 = reserved
- * 001 = CL 2
- * 010 = CL 3
- * 011 = reserved
- * 100 = reserved
- * 101 = CL 2.5
- * 110 = reserved
- * 111 = reserved
- * [ 3: 3] Reserved
- * [ 7: 4] Trc (Row Cycle Time, Ras#-active to Ras#-active/bank auto refresh)
- * 0000 = 7 bus clocks
- * 0001 = 8 bus clocks
- * ...
- * 1110 = 21 bus clocks
- * 1111 = 22 bus clocks
- * [11: 8] Trfc (Row refresh Cycle time, Auto-refresh-active to RAS#-active or RAS#auto-refresh)
- * 0000 = 9 bus clocks
- * 0010 = 10 bus clocks
- * ....
- * 1110 = 23 bus clocks
- * 1111 = 24 bus clocks
- * [14:12] Trcd (Ras#-active to Case#-read/write Delay)
- * 000 = reserved
- * 001 = reserved
- * 010 = 2 bus clocks
- * 011 = 3 bus clocks
- * 100 = 4 bus clocks
- * 101 = 5 bus clocks
- * 110 = 6 bus clocks
- * 111 = reserved
- * [15:15] Reserved
- * [18:16] Trrd (Ras# to Ras# Delay)
- * 000 = reserved
- * 001 = reserved
- * 010 = 2 bus clocks
- * 011 = 3 bus clocks
- * 100 = 4 bus clocks
- * 101 = reserved
- * 110 = reserved
- * 111 = reserved
- * [19:19] Reserved
- * [23:20] Tras (Minmum Ras# Active Time)
- * 0000 to 0100 = reserved
- * 0101 = 5 bus clocks
- * ...
- * 1111 = 15 bus clocks
- * [26:24] Trp (Row Precharge Time)
- * 000 = reserved
- * 001 = reserved
- * 010 = 2 bus clocks
- * 011 = 3 bus clocks
- * 100 = 4 bus clocks
- * 101 = 5 bus clocks
- * 110 = 6 bus clocks
- * 111 = reserved
- * [27:27] Reserved
- * [28:28] Twr (Write Recovery Time)
- * 0 = 2 bus clocks
- * 1 = 3 bus clocks
- * [31:29] Reserved
- */
- PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x03623125,
- /* DRAM Timing High Register
- * F2:0x8C
- * [ 0: 0] Twtr (Write to Read Delay)
- * 0 = 1 bus Clocks
- * 1 = 2 bus Clocks
- * [ 3: 1] Reserved
- * [ 6: 4] Trwf (Read to Write Delay)
- * 000 = 1 bus clocks
- * 001 = 2 bus clocks
- * 010 = 3 bus clocks
- * 011 = 4 bus clocks
- * 100 = 5 bus clocks
- * 101 = 6 bus clocks
- * 110 = reserved
- * 111 = reserved
- * [ 7: 7] Reserved
- * [12: 8] Tref (Refresh Rate)
- * 00000 = 100Mhz 4K rows
- * 00001 = 133Mhz 4K rows
- * 00010 = 166Mhz 4K rows
- * 01000 = 100Mhz 8K/16K rows
- * 01001 = 133Mhz 8K/16K rows
- * 01010 = 166Mhz 8K/16K rows
- * [19:13] Reserved
- * [22:20] Twcl (Write CAS Latency)
- * 000 = 1 Mem clock after CAS# (Unbuffered Dimms)
- * 001 = 2 Mem clocks after CAS# (Registered Dimms)
- * [31:23] Reserved
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000930,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000130,
-#endif
-
- /* DRAM Config Low Register
- * F2:0x90
- * [ 0: 0] DLL Disable
- * 0 = Enabled
- * 1 = Disabled
- * [ 1: 1] D_DRV
- * 0 = Normal Drive
- * 1 = Weak Drive
- * [ 2: 2] QFC_EN
- * 0 = Disabled
- * 1 = Enabled
- * [ 3: 3] Disable DQS Hystersis (FIXME handle this one carefully)
- * 0 = Enable DQS input filter
- * 1 = Disable DQS input filtering
- * [ 7: 4] Reserved
- * [ 8: 8] DRAM_Init
- * 0 = Initialization done or not yet started.
- * 1 = Initiate DRAM intialization sequence
- * [ 9: 9] SO-Dimm Enable
- * 0 = Do nothing
- * 1 = SO-Dimms present
- * [10:10] DramEnable
- * 0 = DRAM not enabled
- * 1 = DRAM initialized and enabled
- * [11:11] Memory Clear Status
- * 0 = Memory Clear function has not completed
- * 1 = Memory Clear function has completed
- * [12:12] Exit Self-Refresh
- * 0 = Exit from self-refresh done or not yet started
- * 1 = DRAM exiting from self refresh
- * [13:13] Self-Refresh Status
- * 0 = Normal Operation
- * 1 = Self-refresh mode active
- * [15:14] Read/Write Queue Bypass Count
- * 00 = 2
- * 01 = 4
- * 10 = 8
- * 11 = 16
- * [16:16] 128-bit/64-Bit
- * 0 = 64bit Interface to DRAM
- * 1 = 128bit Interface to DRAM
- * [17:17] DIMM ECC Enable
- * 0 = Some DIMMs do not have ECC
- * 1 = ALL DIMMS have ECC bits
- * [18:18] UnBuffered DIMMs
- * 0 = Buffered DIMMS
- * 1 = Unbuffered DIMMS
- * [19:19] Enable 32-Byte Granularity
- * 0 = Optimize for 64byte bursts
- * 1 = Optimize for 32byte bursts
- * [20:20] DIMM 0 is x4
- * [21:21] DIMM 1 is x4
- * [22:22] DIMM 2 is x4
- * [23:23] DIMM 3 is x4
- * 0 = DIMM is not x4
- * 1 = x4 DIMM present
- * [24:24] Disable DRAM Receivers
- * 0 = Receivers enabled
- * 1 = Receivers disabled
- * [27:25] Bypass Max
- * 000 = Arbiters chois is always respected
- * 001 = Oldest entry in DCQ can be bypassed 1 time
- * 010 = Oldest entry in DCQ can be bypassed 2 times
- * 011 = Oldest entry in DCQ can be bypassed 3 times
- * 100 = Oldest entry in DCQ can be bypassed 4 times
- * 101 = Oldest entry in DCQ can be bypassed 5 times
- * 110 = Oldest entry in DCQ can be bypassed 6 times
- * 111 = Oldest entry in DCQ can be bypassed 7 times
- * [31:28] Reserved
- */
- PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000,
- (4 << 25)|(0 << 24)|
- (0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)|
- (1 << 19)|(1 << 18)|(0 << 17)|(0 << 16)|
- (2 << 14)|(0 << 13)|(0 << 12)|
- (0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)|
- (0 << 3) |(0 << 1) |(0 << 0),
- /* DRAM Config High Register
- * F2:0x94
- * [ 0: 3] Maximum Asynchronous Latency
- * 0000 = 0 ns
- * ...
- * 1111 = 15 ns
- * [ 7: 4] Reserved
- * [11: 8] Read Preamble
- * 0000 = 2.0 ns
- * 0001 = 2.5 ns
- * 0010 = 3.0 ns
- * 0011 = 3.5 ns
- * 0100 = 4.0 ns
- * 0101 = 4.5 ns
- * 0110 = 5.0 ns
- * 0111 = 5.5 ns
- * 1000 = 6.0 ns
- * 1001 = 6.5 ns
- * 1010 = 7.0 ns
- * 1011 = 7.5 ns
- * 1100 = 8.0 ns
- * 1101 = 8.5 ns
- * 1110 = 9.0 ns
- * 1111 = 9.5 ns
- * [15:12] Reserved
- * [18:16] Idle Cycle Limit
- * 000 = 0 cycles
- * 001 = 4 cycles
- * 010 = 8 cycles
- * 011 = 16 cycles
- * 100 = 32 cycles
- * 101 = 64 cycles
- * 110 = 128 cycles
- * 111 = 256 cycles
- * [19:19] Dynamic Idle Cycle Center Enable
- * 0 = Use Idle Cycle Limit
- * 1 = Generate a dynamic Idle cycle limit
- * [22:20] DRAM MEMCLK Frequency
- * 000 = 100Mhz
- * 001 = reserved
- * 010 = 133Mhz
- * 011 = reserved
- * 100 = reserved
- * 101 = 166Mhz
- * 110 = reserved
- * 111 = reserved
- * [24:23] Reserved
- * [25:25] Memory Clock Ratio Valid (FIXME carefully enable memclk)
- * 0 = Disable MemClks
- * 1 = Enable MemClks
- * [26:26] Memory Clock 0 Enable
- * 0 = Disabled
- * 1 = Enabled
- * [27:27] Memory Clock 1 Enable
- * 0 = Disabled
- * 1 = Enabled
- * [28:28] Memory Clock 2 Enable
- * 0 = Disabled
- * 1 = Enabled
- * [29:29] Memory Clock 3 Enable
- * 0 = Disabled
- * 1 = Enabled
- * [31:30] Reserved
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a05,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a06,
-#endif
- /* DRAM Delay Line Register
- * F2:0x98
- * Adjust the skew of the input DQS strobe relative to DATA
- * [15: 0] Reserved
- * [23:16] Delay Line Adjust
- * Adjusts the DLL derived PDL delay by one or more delay stages
- * in either the faster or slower direction.
- * [24:24} Adjust Slower
- * 0 = Do Nothing
- * 1 = Adj is used to increase the PDL delay
- * [25:25] Adjust Faster
- * 0 = Do Nothing
- * 1 = Adj is used to decrease the PDL delay
- * [31:26] Reserved
- */
- PCI_ADDR(0, 0x18, 2, 0x98), 0xfc00ffff, 0x00000000,
- /* DRAM Scrub Control Register
- * F3:0x58
- * [ 4: 0] DRAM Scrube Rate
- * [ 7: 5] reserved
- * [12: 8] L2 Scrub Rate
- * [15:13] reserved
- * [20:16] Dcache Scrub
- * [31:21] reserved
- * Scrub Rates
- * 00000 = Do not scrub
- * 00001 = 40.00 ns
- * 00010 = 80.00 ns
- * 00011 = 160.00 ns
- * 00100 = 320.00 ns
- * 00101 = 640.00 ns
- * 00110 = 1.28 us
- * 00111 = 2.56 us
- * 01000 = 5.12 us
- * 01001 = 10.20 us
- * 01011 = 41.00 us
- * 01100 = 81.90 us
- * 01101 = 163.80 us
- * 01110 = 327.70 us
- * 01111 = 655.40 us
- * 10000 = 1.31 ms
- * 10001 = 2.62 ms
- * 10010 = 5.24 ms
- * 10011 = 10.49 ms
- * 10100 = 20.97 ms
- * 10101 = 42.00 ms
- * 10110 = 84.00 ms
- * All Others = Reserved
- */
- PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000,
- /* DRAM Scrub Address Low Register
- * F3:0x5C
- * [ 0: 0] DRAM Scrubber Redirect Enable
- * 0 = Do nothing
- * 1 = Scrubber Corrects errors found in normal operation
- * [ 5: 1] Reserved
- * [31: 6] DRAM Scrub Address 31-6
- */
- PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000,
- /* DRAM Scrub Address High Register
- * F3:0x60
- * [ 7: 0] DRAM Scrubb Address 39-32
- * [31: 8] Reserved
- */
- PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000,
- };
- int i;
- int max;
- print_debug("setting up CPU0 northbridge registers\r\n");
- max = sizeof(register_values)/sizeof(register_values[0]);
- for(i = 0; i < max; i += 3) {
- unsigned long reg;
-#if 0
- print_debug_hex32(register_values[i]);
- print_debug(" <-");
- print_debug_hex32(register_values[i+2]);
- print_debug("\r\n");
-#endif
- reg = pci_read_config32(register_values[i]);
- reg &= register_values[i+1];
- reg |= register_values[i+2];
- pci_write_config32(register_values[i], reg);
- }
- print_debug("done.\r\n");
-}
-
-#define DRAM_CONFIG_LOW 0x90
-#define DCL_DLL_Disable (1<<0)
-#define DCL_D_DRV (1<<1)
-#define DCL_QFC_EN (1<<2)
-#define DCL_DisDqsHys (1<<3)
-#define DCL_DramInit (1<<8)
-#define DCL_DramEnable (1<<10)
-#define DCL_MemClrStatus (1<<11)
-#define DCL_DimmEcEn (1<<17)
-
-#define NODE_ID 0x60
-#define HT_INIT_CONTROL 0x6c
-
-#define HTIC_ColdR_Detect (1<<4)
-#define HTIC_BIOSR_Detect (1<<5)
-#define HTIC_INIT_Detect (1<<6)
-
-static void sdram_set_spd_registers(void)
-{
- unsigned long dcl;
- dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
- /* Until I know what is going on disable ECC support */
- dcl &= ~DCL_DimmEcEn;
- pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl);
-}
-
-#define TIMEOUT_LOOPS 300000
-static void sdram_enable(void)
-{
- unsigned long dcl;
-
- /* Toggle DisDqsHys to get it working */
- dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
- print_debug("dcl: ");
- print_debug_hex32(dcl);
- print_debug("\r\n");
- dcl |= DCL_DisDqsHys;
- pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl);
- dcl &= ~DCL_DisDqsHys;
- dcl &= ~DCL_DLL_Disable;
- dcl &= ~DCL_D_DRV;
- dcl &= ~DCL_QFC_EN;
- dcl |= DCL_DramInit;
- pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl);
-
- print_debug("Initializing memory: ");
- int loops = 0;
- do {
- dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
- loops += 1;
- if ((loops & 1023) == 0) {
- print_debug(".");
- }
- } while(((dcl & DCL_DramInit) != 0) && (loops < TIMEOUT_LOOPS));
- if (loops >= TIMEOUT_LOOPS) {
- print_debug(" failed\r\n");
- } else {
- print_debug(" done\r\n");
- }
-
-#if 0
- print_debug("Clearing memory: ");
- loops = 0;
- do {
- dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
- loops += 1;
- if ((loops & 1023) == 0) {
- print_debug(" ");
- print_debug_hex32(loops);
- }
- } while(((dcl & DCL_MemClrStatus) == 0) && (loops < TIMEOUT_LOOPS));
- if (loops >= TIMEOUT_LOOPS) {
- print_debug("failed\r\n");
- } else {
- print_debug("done\r\n");
- }
-#endif
-}
-
-static void sdram_first_normal_reference(void) {}
-static void sdram_enable_refresh(void) {}
-static void sdram_special_finishup(void) {}
-
+#include "northbridge/amd/amdk8/early_ht.c"
+#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
+#include "northbridge/amd/amdk8/raminit.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
static int boot_cpu(void)
@@ -853,641 +56,6 @@ static int cpu_init_detected(void)
return cpu_init;
}
-static void setup_coherent_ht_domain(void)
-{
- static const unsigned int register_values[] = {
- /* Routing Table Node i
- * F0:0x40 i = 0,
- * F0:0x44 i = 1,
- * F0:0x48 i = 2,
- * F0:0x4c i = 3,
- * F0:0x50 i = 4,
- * F0:0x54 i = 5,
- * F0:0x58 i = 6,
- * F0:0x5c i = 7
- * [ 0: 3] Request Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [11: 8] Response Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [19:16] Broadcast route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- */
- PCI_ADDR(0, 0x18, 0, 0x40), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x44), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x48), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x4c), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x50), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x54), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x58), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x5c), 0xfff0f0f0, 0x00010101,
-
- /* Hypetransport Transaction Control Register
- * F0:0x68
- * [ 0: 0] Disable read byte probe
- * 0 = Probes issues
- * 1 = Probes not issued
- * [ 1: 1] Disable Read Doubleword probe
- * 0 = Probes issued
- * 1 = Probes not issued
- * [ 2: 2] Disable write byte probes
- * 0 = Probes issued
- * 1 = Probes not issued
- * [ 3: 3] Disable Write Doubleword Probes
- * 0 = Probes issued
- * 1 = Probes not issued.
- * [ 4: 4] Disable Memroy Controller Target Start
- * 0 = TgtStart packets are generated
- * 1 = TgtStart packets are not generated.
- * [ 5: 5] CPU1 Enable
- * 0 = Second CPU disabled or not present
- * 1 = Second CPU enabled.
- * [ 6: 6] CPU Request PassPW
- * 0 = CPU requests do not pass posted writes
- * 1 = CPU requests pass posted writes.
- * [ 7: 7] CPU read Respons PassPW
- * 0 = CPU Responses do not pass posted writes
- * 1 = CPU responses pass posted writes.
- * [ 8: 8] Disable Probe Memory Cancel
- * 0 = Probes may generate MemCancels
- * 1 = Probes may not generate MemCancels
- * [ 9: 9] Disable Remote Probe Memory Cancel.
- * 0 = Probes hitting dirty blocks generate memory cancel packets
- * 1 = Only probed caches on the same node as the memory controller
- * generate cancel packets.
- * [10:10] Disable Fill Probe
- * 0 = Probes issued for cache fills
- * 1 = Probes not issued for cache fills.
- * [11:11] Response PassPw
- * 0 = Downstream response PassPW based on original request
- * 1 = Downstream response PassPW set to 1
- * [12:12] Change ISOC to Ordered
- * 0 = Bit 1 of coherent HT RdSz/WrSz command used for iosynchronous prioritization
- * 1 = Bit 1 of coherent HT RdSz/WrSz command used for ordering.
- * [14:13] Buffer Release Priority select
- * 00 = 64
- * 01 = 16
- * 10 = 8
- * 11 = 2
- * [15:15] Limit Coherent HT Configuration Space Range
- * 0 = No coherent HT configuration space restrictions
- * 1 = Limit coherent HT configuration space based on node count
- * [16:16] Local Interrupt Conversion Enable.
- * 0 = ExtInt/NMI interrups unaffected.
- * 1 = ExtInt/NMI broadcat interrupts converted to LINT0/1
- * [17:17] APIC Extended Broadcast Enable.
- * 0 = APIC broadcast is 0F
- * 1 = APIC broadcast is FF
- * [18:18] APIC Extended ID Enable
- * 0 = APIC ID is 4 bits.
- * 1 = APIC ID is 8 bits.
- * [19:19] APIC Extended Spurious Vector Enable
- * 0 = Lower 4 bits of spurious vector are read-only 1111
- * 1 = Lower 4 bits of spurious vecotr are writeable.
- * [20:20] Sequence ID Source Node Enable
- * 0 = Normal operation
- * 1 = Keep SeqID on routed packets for debugging.
- * [22:21] Downstream non-posted request limit
- * 00 = No limit
- * 01 = Limited to 1
- * 10 = Limited to 4
- * 11 = Limited to 8
- * [23:23] RESERVED
- * [25:24] Medium-Priority Bypass Count
- * - Maximum # of times a medium priority access can pass a low
- * priority access before Medium-Priority mode is disabled for one access.
- * [27:26] High-Priority Bypass Count
- * - Maximum # of times a high prioirty access can pass a medium or low
- * priority access before High-prioirty mode is disabled for one access.
- * [28:28] Enable High Priority CPU Reads
- * 0 = Cpu reads are medium prioirty
- * 1 = Cpu reads are high prioirty
- * [29:29] Disable Low Priority Writes
- * 0 = Non-isochronous writes are low priority
- * 1 = Non-isochronous writes are medium prioirty
- * [30:30] Disable High Priority Isochronous writes
- * 0 = Isochronous writes are high priority
- * 1 = Isochronous writes are medium priority
- * [31:31] Disable Medium Priority Isochronous writes
- * 0 = Isochronous writes are medium are high
- * 1 = With bit 30 set makes Isochrouns writes low priority.
- */
- PCI_ADDR(0, 0x18, 0, 0x68), 0x00800000, 0x0f00840f,
- /* HT Initialization Control Register
- * F0:0x6C
- * [ 0: 0] Routing Table Disable
- * 0 = Packets are routed according to routing tables
- * 1 = Packets are routed according to the default link field
- * [ 1: 1] Request Disable (BSP should clear this)
- * 0 = Request packets may be generated
- * 1 = Request packets may not be generated.
- * [ 3: 2] Default Link (Read-only)
- * 00 = LDT0
- * 01 = LDT1
- * 10 = LDT2
- * 11 = CPU on same node
- * [ 4: 4] Cold Reset
- * - Scratch bit cleared by a cold reset
- * [ 5: 5] BIOS Reset Detect
- * - Scratch bit cleared by a cold reset
- * [ 6: 6] INIT Detect
- * - Scratch bit cleared by a warm or cold reset not by an INIT
- *
- */
- PCI_ADDR(0, 0x18, 0, 0x6C), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4),
- /* LDTi Capabilities Registers
- * F0:0x80 i = 0,
- * F0:0xA0 i = 1,
- * F0:0xC0 i = 2,
- */
- /* LDTi Link Control Registrs
- * F0:0x84 i = 0,
- * F0:0xA4 i = 1,
- * F0:0xC4 i = 2,
- * [ 1: 1] CRC Flood Enable
- * 0 = Do not generate sync packets on CRC error
- * 1 = Generate sync packets on CRC error
- * [ 2: 2] CRC Start Test (Read-Only)
- * [ 3: 3] CRC Force Frame Error
- * 0 = Do not generate bad CRC
- * 1 = Generate bad CRC
- * [ 4: 4] Link Failure
- * 0 = No link failure detected
- * 1 = Link failure detected
- * [ 5: 5] Initialization Complete
- * 0 = Initialization not complete
- * 1 = Initialization complete
- * [ 6: 6] Receiver off
- * 0 = Recevier on
- * 1 = Receiver off
- * [ 7: 7] Transmitter Off
- * 0 = Transmitter on
- * 1 = Transmitter off
- * [ 9: 8] CRC_Error
- * 00 = No error
- * [0] = 1 Error on byte lane 0
- * [1] = 1 Error on byte lane 1
- * [12:12] Isochrnous Enable (Read-Only)
- * [13:13] HT Stop Tristate Enable
- * 0 = Driven during an LDTSTOP_L
- * 1 = Tristated during and LDTSTOP_L
- * [14:14] Extended CTL Time
- * 0 = CTL is asserted for 16 bit times during link initialization
- * 1 = CTL is asserted for 50us during link initialization
- * [18:16] Max Link Width In (Read-Only?)
- * 000 = 8 bit link
- * 001 = 16bit link
- * [19:19] Doubleword Flow Control in (Read-Only)
- * 0 = This link does not support doubleword flow control
- * 1 = This link supports doubleword flow control
- * [22:20] Max Link Width Out (Read-Only?)
- * 000 = 8 bit link
- * 001 = 16bit link
- * [23:23] Doubleworld Flow Control out (Read-Only)
- * 0 = This link does not support doubleword flow control
- * 1 = This link supports doubleworkd flow control
- * [26:24] Link Width In
- * 000 = Use 8 bits
- * 001 = Use 16 bits
- * 010 = reserved
- * 011 = Use 32 bits
- * 100 = Use 2 bits
- * 101 = Use 4 bits
- * 110 = reserved
- * 111 = Link physically not connected
- * [27:27] Doubleword Flow Control In Enable
- * 0 = Doubleword flow control disabled
- * 1 = Doubleword flow control enabled (Not currently supported)
- * [30:28] Link Width Out
- * 000 = Use 8 bits
- * 001 = Use 16 bits
- * 010 = reserved
- * 011 = Use 32 bits
- * 100 = Use 2 bits
- * 101 = Use 4 bits
- * 110 = reserved
- * 111 = Link physically not connected
- * [31:31] Doubleworld Flow Control Out Enable
- * 0 = Doubleworld flow control disabled
- * 1 = Doubleword flow control enabled (Not currently supported)
- */
- PCI_ADDR(0, 0x18, 0, 0x84), 0x00009c05, 0x11110020,
- /* LDTi Frequency/Revision Registers
- * F0:0x88 i = 0,
- * F0:0xA8 i = 1,
- * F0:0xC8 i = 2,
- * [ 4: 0] Minor Revision
- * Contains the HT Minor revision
- * [ 7: 5] Major Revision
- * Contains the HT Major revision
- * [11: 8] Link Frequency (Takes effect the next time the link is reconnected)
- * 0000 = 200Mhz
- * 0001 = reserved
- * 0010 = 400Mhz
- * 0011 = reserved
- * 0100 = 600Mhz
- * 0101 = 800Mhz
- * 0110 = 1000Mhz
- * 0111 = reserved
- * 1000 = reserved
- * 1001 = reserved
- * 1010 = reserved
- * 1011 = reserved
- * 1100 = reserved
- * 1101 = reserved
- * 1110 = reserved
- * 1111 = 100 Mhz
- * [15:12] Error (Not currently Implemented)
- * [31:16] Indicates the frequency capabilities of the link
- * [16] = 1 encoding 0000 of freq supported
- * [17] = 1 encoding 0001 of freq supported
- * [18] = 1 encoding 0010 of freq supported
- * [19] = 1 encoding 0011 of freq supported
- * [20] = 1 encoding 0100 of freq supported
- * [21] = 1 encoding 0101 of freq supported
- * [22] = 1 encoding 0110 of freq supported
- * [23] = 1 encoding 0111 of freq supported
- * [24] = 1 encoding 1000 of freq supported
- * [25] = 1 encoding 1001 of freq supported
- * [26] = 1 encoding 1010 of freq supported
- * [27] = 1 encoding 1011 of freq supported
- * [28] = 1 encoding 1100 of freq supported
- * [29] = 1 encoding 1101 of freq supported
- * [30] = 1 encoding 1110 of freq supported
- * [31] = 1 encoding 1111 of freq supported
- */
- PCI_ADDR(0, 0x18, 0, 0x88), 0xfffff0ff, 0x00000200,
- /* LDTi Feature Capability
- * F0:0x8C i = 0,
- * F0:0xAC i = 1,
- * F0:0xCC i = 2,
- */
- /* LDTi Buffer Count Registers
- * F0:0x90 i = 0,
- * F0:0xB0 i = 1,
- * F0:0xD0 i = 2,
- */
- /* LDTi Bus Number Registers
- * F0:0x94 i = 0,
- * F0:0xB4 i = 1,
- * F0:0xD4 i = 2,
- * For NonCoherent HT specifies the bus number downstream (behind the host bridge)
- * [ 0: 7] Primary Bus Number
- * [15: 8] Secondary Bus Number
- * [23:15] Subordiante Bus Number
- * [31:24] reserved
- */
- PCI_ADDR(0, 0x18, 0, 0x94), 0xff000000, 0x00ff0000,
- /* LDTi Type Registers
- * F0:0x98 i = 0,
- * F0:0xB8 i = 1,
- * F0:0xD8 i = 2,
- */
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
-#endif
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
-#endif
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
- PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
-#endif
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration regin i
- */
- PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-
- };
- int i;
- int max;
- print_debug("setting up coherent ht domain....\r\n");
- max = sizeof(register_values)/sizeof(register_values[0]);
- for(i = 0; i < max; i += 3) {
- unsigned long reg;
-#if 0
- print_debug_hex32(register_values[i]);
- print_debug(" <-");
- print_debug_hex32(register_values[i+2]);
- print_debug("\r\n");
-#endif
- reg = pci_read_config32(register_values[i]);
- reg &= register_values[i+1];
- reg |= register_values[i+2] & ~register_values[i+1];
- pci_write_config32(register_values[i], reg);
- }
- print_debug("done.\r\n");
-}
-
-static void enumerate_ht_chain(void)
-{
- unsigned next_unitid, last_unitid;;
- next_unitid = 1;
- do {
- uint32_t id;
- uint8_t hdr_type, pos;
- last_unitid = next_unitid;
-
- id = pci_read_config32(PCI_ADDR(0,0,0,PCI_VENDOR_ID));
- /* If the chain is enumerated quit */
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- break;
- }
- hdr_type = pci_read_config8(PCI_ADDR(0,0,0,PCI_HEADER_TYPE));
- pos = 0;
- hdr_type &= 0x7f;
-
- if ((hdr_type == PCI_HEADER_TYPE_NORMAL) ||
- (hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
- pos = pci_read_config8(PCI_ADDR(0,0,0, PCI_CAPABILITY_LIST));
- }
- while(pos != 0) {
- uint8_t cap;
- cap = pci_read_config8(PCI_ADDR(0,0,0, pos + PCI_CAP_LIST_ID));
- if (cap == PCI_CAP_ID_HT) {
- uint16_t flags;
- flags = pci_read_config16(PCI_ADDR(0,0,0, pos + PCI_CAP_FLAGS));
- if ((flags >> 13) == 0) {
- unsigned count;
- flags &= ~0x1f;
- flags |= next_unitid & 0x1f;
- count = (flags >> 5) & 0x1f;
- pci_write_config16(PCI_ADDR(0, 0, 0, pos + PCI_CAP_FLAGS), flags);
- next_unitid += count;
- break;
- }
- }
- pos = pci_read_config8(PCI_ADDR(0, 0, 0, pos + PCI_CAP_LIST_NEXT));
- }
- } while((last_unitid != next_unitid) && (next_unitid <= 0x1f));
-}
static void print_pci_devices(void)
{
@@ -1510,123 +78,6 @@ static void print_pci_devices(void)
}
}
-#define PCI_ID(VENDOR_ID, DEVICE_ID) ((DEVICE_ID << 16) | (VENDOR_ID))
-#define SMBUS_IO_BASE 0x1000
-
-#define SMBGSTATUS 0xe0
-#define SMBGCTL 0xe2
-#define SMBHSTADDR 0xe4
-#define SMBHSTDAT 0xe6
-#define SMBHSTCMD 0xe8
-#define SMBHSTFIFO 0xe9
-
-#define SMBUS_TIMEOUT (100*1000*10)
-
-static void enable_smbus(void)
-{
- uint32_t addr;
- for(addr = PCI_ADDR(0, 0, 0, 0);
- addr <= PCI_ADDR(0, 0x1f, 0x7, 0);
- addr += PCI_ADDR(0,0,1,0)) {
- uint32_t id;
- id = pci_read_config32(addr);
- if (id == PCI_ID(0x1022, 0x746b)) {
- break;
- }
- }
- if (addr > PCI_ADDR(0, 0x1f, 0x7, 0)) {
- die("SMBUS controller not found\r\n");
- }
- uint8_t enable;
- print_debug("SMBus controller enabled\r\n");
- pci_write_config32(addr + 0x58, SMBUS_IO_BASE | 1);
- enable = pci_read_config8(addr + 0x41);
- pci_write_config8(addr + 0x41, enable | (1 << 7));
-}
-
-
-static inline void smbus_delay(void)
-{
- outb(0x80, 0x80);
-}
-
-static int smbus_wait_until_ready(void)
-{
- unsigned long loops;
- loops = SMBUS_TIMEOUT;
- do {
- unsigned short val;
- smbus_delay();
- val = inw(SMBUS_IO_BASE + SMBGSTATUS);
- if ((val & 0x800) == 0) {
- break;
- }
- } while(--loops);
- return loops?0:-1;
-}
-
-static int smbus_wait_until_done(void)
-{
- unsigned long loops;
- loops = SMBUS_TIMEOUT;
- do {
- unsigned short val;
- smbus_delay();
-
- val = inw(SMBUS_IO_BASE + SMBGSTATUS);
- if (((val & 0x8) == 0) || ((val & 0x437) != 0)) {
- break;
- }
- } while(--loops);
- return loops?0:-1;
-}
-
-static int smbus_read_byte(unsigned device, unsigned address)
-{
- unsigned char global_control_register;
- unsigned char global_status_register;
- unsigned char byte;
-
- if (smbus_wait_until_ready() < 0) {
- return -1;
- }
-
- /* setup transaction */
- /* disable interrupts */
- outw(inw(SMBUS_IO_BASE + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), SMBUS_IO_BASE + SMBGCTL);
- /* set the device I'm talking too */
- outw(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADDR);
- /* set the command/address... */
- outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
- /* set up for a byte data read */
- outw((inw(SMBUS_IO_BASE + SMBGCTL) & ~7) | (0x2), SMBUS_IO_BASE + SMBGCTL);
-
- /* clear any lingering errors, so the transaction will run */
- /* Do I need to write the bits to a 1 to clear an error? */
- outw(inw(SMBUS_IO_BASE + SMBGSTATUS), SMBUS_IO_BASE + SMBGSTATUS);
-
- /* clear the data word...*/
- outw(0, SMBUS_IO_BASE + SMBHSTDAT);
-
- /* start the command */
- outw((inw(SMBUS_IO_BASE + SMBGCTL) | (1 << 3)), SMBUS_IO_BASE + SMBGCTL);
-
-
- /* poll for transaction completion */
- if (smbus_wait_until_done() < 0) {
- return -1;
- }
-
- global_status_register = inw(SMBUS_IO_BASE + SMBGSTATUS);
-
- /* read results of transaction */
- byte = inw(SMBUS_IO_BASE + SMBHSTDAT) & 0xff;
-
- if (global_status_register != (1 << 4)) {
- return -1;
- }
- return byte;
-}
static void dump_spd_registers(void)
{
@@ -1648,7 +99,7 @@ static void dump_spd_registers(void)
status = smbus_read_byte(device, i);
if (status < 0) {
print_debug("bad device\r\n");
- continue;
+ break;
}
byte = status & 0xff;
print_debug_hex8(byte);
@@ -1659,55 +110,83 @@ static void dump_spd_registers(void)
}
}
-static void dump_spd_registers1(void)
+
+static void pnp_write_config(unsigned char port, unsigned char value, unsigned char reg)
{
- int i;
- print_debug("dimm: ");
- print_debug_hex8(SMBUS_MEM_DEVICE_START);
- for(i = 0; i < 256; i++) {
- int status;
- unsigned char byte;
- if ((i & 0xf) == 0) {
- print_debug("\r\n");
- print_debug_hex8(i);
- print_debug(": ");
- }
- status = smbus_read_byte(SMBUS_MEM_DEVICE_START, i);
- if (status < 0) {
- print_debug("bad device\r\n");
- break;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
- }
- print_debug("\r\n");
+ outb(reg, port);
+ outb(value, port +1);
}
+static unsigned char pnp_read_config(unsigned char port, unsigned char reg)
+{
+ outb(reg, port);
+ return inb(port +1);
+}
+static void pnp_set_logical_device(unsigned char port, int device)
+{
+ pnp_write_config(port, device, 0x07);
+}
-static void dump_spd_registers2(void)
+static void pnp_set_enable(unsigned char port, int enable)
{
- unsigned dev;
- print_debug("\r\n");
- for(dev = SMBUS_MEM_DEVICE_START; dev <= SMBUS_MEM_DEVICE_END; dev += SMBUS_MEM_DEVICE_INC) {
- print_debug("dimm: ");
- print_debug_hex8(dev);
- int status;
- unsigned char byte;
- status = smbus_read_byte(dev, 0);
- if (status < 0) {
- print_debug("bad device\r\n");
- continue;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug("\r\n");
- }
+ pnp_write_config(port, enable?0x1:0x0, 0x30);
+}
+
+static int pnp_read_enable(unsigned char port)
+{
+ return !!pnp_read_config(port, 0x30);
+}
+
+static void pnp_set_iobase0(unsigned char port, unsigned iobase)
+{
+ pnp_write_config(port, (iobase >> 8) & 0xff, 0x60);
+ pnp_write_config(port, iobase & 0xff, 0x61);
+}
+
+static void pnp_set_iobase1(unsigned char port, unsigned iobase)
+{
+ pnp_write_config(port, (iobase >> 8) & 0xff, 0x62);
+ pnp_write_config(port, iobase & 0xff, 0x63);
+}
+
+static void pnp_set_irq0(unsigned char port, unsigned irq)
+{
+ pnp_write_config(port, irq, 0x70);
+}
+
+static void pnp_set_irq1(unsigned char port, unsigned irq)
+{
+ pnp_write_config(port, irq, 0x72);
+}
+
+static void pnp_set_drq(unsigned char port, unsigned drq)
+{
+ pnp_write_config(port, drq & 0xff, 0x74);
+}
+
+#define PC87360_FDC 0x00
+#define PC87360_PP 0x01
+#define PC87360_SP2 0x02
+#define PC87360_SP1 0x03
+#define PC87360_SWC 0x04
+#define PC87360_KBCM 0x05
+#define PC87360_KBCK 0x06
+#define PC87360_GPIO 0x07
+#define PC87360_ACB 0x08
+#define PC87360_FSCM 0x09
+#define PC87360_WDT 0x0A
+
+static void pc87360_enable_serial(void)
+{
+ pnp_set_logical_device(SIO_BASE, PC87360_SP1);
+ pnp_set_enable(SIO_BASE, 1);
+ pnp_set_iobase0(SIO_BASE, 0x3f8);
}
static void main(void)
{
+ pc87360_enable_serial();
uart_init();
console_init();
if (boot_cpu() && !cpu_init_detected()) {
@@ -1716,11 +195,8 @@ static void main(void)
print_pci_devices();
enable_smbus();
sdram_initialize();
-#if 0
+
dump_spd_registers();
-#endif
- dump_spd_registers1();
- dump_spd_registers2();
#if 0
ram_fill( 0x00100000, 0x00180000);
ram_verify(0x00100000, 0x00180000);
diff --git a/src/mainboard/amd/solo/failover.c b/src/mainboard/amd/solo/failover.c
new file mode 100644
index 0000000000..cda8ea8076
--- /dev/null
+++ b/src/mainboard/amd/solo/failover.c
@@ -0,0 +1,26 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include "arch/romcc_io.h"
+#include "pc80/mc146818rtc_early.c"
+#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+
+
+
+static void main(void)
+{
+ if (do_normal_boot()) {
+ /* Nothing special needs to be done to find bus 0 */
+
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ /* Setup the 8111 */
+ amd8111_enable_rom();
+
+ /* Jump to the normal image */
+ asm("jmp __normal_image");
+ }
+}
diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c
new file mode 100644
index 0000000000..9b799b3d31
--- /dev/null
+++ b/src/northbridge/amd/amdk8/coherent_ht.c
@@ -0,0 +1,591 @@
+static void setup_coherent_ht_domain(void)
+{
+ static const unsigned int register_values[] = {
+ /* Routing Table Node i
+ * F0:0x40 i = 0,
+ * F0:0x44 i = 1,
+ * F0:0x48 i = 2,
+ * F0:0x4c i = 3,
+ * F0:0x50 i = 4,
+ * F0:0x54 i = 5,
+ * F0:0x58 i = 6,
+ * F0:0x5c i = 7
+ * [ 0: 3] Request Route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ * [11: 8] Response Route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ * [19:16] Broadcast route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ */
+ PCI_ADDR(0, 0x18, 0, 0x40), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x44), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x48), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x4c), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x50), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x54), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x58), 0xfff0f0f0, 0x00010101,
+ PCI_ADDR(0, 0x18, 0, 0x5c), 0xfff0f0f0, 0x00010101,
+
+ /* Hypetransport Transaction Control Register
+ * F0:0x68
+ * [ 0: 0] Disable read byte probe
+ * 0 = Probes issues
+ * 1 = Probes not issued
+ * [ 1: 1] Disable Read Doubleword probe
+ * 0 = Probes issued
+ * 1 = Probes not issued
+ * [ 2: 2] Disable write byte probes
+ * 0 = Probes issued
+ * 1 = Probes not issued
+ * [ 3: 3] Disable Write Doubleword Probes
+ * 0 = Probes issued
+ * 1 = Probes not issued.
+ * [ 4: 4] Disable Memroy Controller Target Start
+ * 0 = TgtStart packets are generated
+ * 1 = TgtStart packets are not generated.
+ * [ 5: 5] CPU1 Enable
+ * 0 = Second CPU disabled or not present
+ * 1 = Second CPU enabled.
+ * [ 6: 6] CPU Request PassPW
+ * 0 = CPU requests do not pass posted writes
+ * 1 = CPU requests pass posted writes.
+ * [ 7: 7] CPU read Respons PassPW
+ * 0 = CPU Responses do not pass posted writes
+ * 1 = CPU responses pass posted writes.
+ * [ 8: 8] Disable Probe Memory Cancel
+ * 0 = Probes may generate MemCancels
+ * 1 = Probes may not generate MemCancels
+ * [ 9: 9] Disable Remote Probe Memory Cancel.
+ * 0 = Probes hitting dirty blocks generate memory cancel packets
+ * 1 = Only probed caches on the same node as the memory controller
+ * generate cancel packets.
+ * [10:10] Disable Fill Probe
+ * 0 = Probes issued for cache fills
+ * 1 = Probes not issued for cache fills.
+ * [11:11] Response PassPw
+ * 0 = Downstream response PassPW based on original request
+ * 1 = Downstream response PassPW set to 1
+ * [12:12] Change ISOC to Ordered
+ * 0 = Bit 1 of coherent HT RdSz/WrSz command used for iosynchronous prioritization
+ * 1 = Bit 1 of coherent HT RdSz/WrSz command used for ordering.
+ * [14:13] Buffer Release Priority select
+ * 00 = 64
+ * 01 = 16
+ * 10 = 8
+ * 11 = 2
+ * [15:15] Limit Coherent HT Configuration Space Range
+ * 0 = No coherent HT configuration space restrictions
+ * 1 = Limit coherent HT configuration space based on node count
+ * [16:16] Local Interrupt Conversion Enable.
+ * 0 = ExtInt/NMI interrups unaffected.
+ * 1 = ExtInt/NMI broadcat interrupts converted to LINT0/1
+ * [17:17] APIC Extended Broadcast Enable.
+ * 0 = APIC broadcast is 0F
+ * 1 = APIC broadcast is FF
+ * [18:18] APIC Extended ID Enable
+ * 0 = APIC ID is 4 bits.
+ * 1 = APIC ID is 8 bits.
+ * [19:19] APIC Extended Spurious Vector Enable
+ * 0 = Lower 4 bits of spurious vector are read-only 1111
+ * 1 = Lower 4 bits of spurious vecotr are writeable.
+ * [20:20] Sequence ID Source Node Enable
+ * 0 = Normal operation
+ * 1 = Keep SeqID on routed packets for debugging.
+ * [22:21] Downstream non-posted request limit
+ * 00 = No limit
+ * 01 = Limited to 1
+ * 10 = Limited to 4
+ * 11 = Limited to 8
+ * [23:23] RESERVED
+ * [25:24] Medium-Priority Bypass Count
+ * - Maximum # of times a medium priority access can pass a low
+ * priority access before Medium-Priority mode is disabled for one access.
+ * [27:26] High-Priority Bypass Count
+ * - Maximum # of times a high prioirty access can pass a medium or low
+ * priority access before High-prioirty mode is disabled for one access.
+ * [28:28] Enable High Priority CPU Reads
+ * 0 = Cpu reads are medium prioirty
+ * 1 = Cpu reads are high prioirty
+ * [29:29] Disable Low Priority Writes
+ * 0 = Non-isochronous writes are low priority
+ * 1 = Non-isochronous writes are medium prioirty
+ * [30:30] Disable High Priority Isochronous writes
+ * 0 = Isochronous writes are high priority
+ * 1 = Isochronous writes are medium priority
+ * [31:31] Disable Medium Priority Isochronous writes
+ * 0 = Isochronous writes are medium are high
+ * 1 = With bit 30 set makes Isochrouns writes low priority.
+ */
+ PCI_ADDR(0, 0x18, 0, 0x68), 0x00800000, 0x0f00840f,
+ /* HT Initialization Control Register
+ * F0:0x6C
+ * [ 0: 0] Routing Table Disable
+ * 0 = Packets are routed according to routing tables
+ * 1 = Packets are routed according to the default link field
+ * [ 1: 1] Request Disable (BSP should clear this)
+ * 0 = Request packets may be generated
+ * 1 = Request packets may not be generated.
+ * [ 3: 2] Default Link (Read-only)
+ * 00 = LDT0
+ * 01 = LDT1
+ * 10 = LDT2
+ * 11 = CPU on same node
+ * [ 4: 4] Cold Reset
+ * - Scratch bit cleared by a cold reset
+ * [ 5: 5] BIOS Reset Detect
+ * - Scratch bit cleared by a cold reset
+ * [ 6: 6] INIT Detect
+ * - Scratch bit cleared by a warm or cold reset not by an INIT
+ *
+ */
+ PCI_ADDR(0, 0x18, 0, 0x6C), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4),
+ /* LDTi Capabilities Registers
+ * F0:0x80 i = 0,
+ * F0:0xA0 i = 1,
+ * F0:0xC0 i = 2,
+ */
+ /* LDTi Link Control Registrs
+ * F0:0x84 i = 0,
+ * F0:0xA4 i = 1,
+ * F0:0xC4 i = 2,
+ * [ 1: 1] CRC Flood Enable
+ * 0 = Do not generate sync packets on CRC error
+ * 1 = Generate sync packets on CRC error
+ * [ 2: 2] CRC Start Test (Read-Only)
+ * [ 3: 3] CRC Force Frame Error
+ * 0 = Do not generate bad CRC
+ * 1 = Generate bad CRC
+ * [ 4: 4] Link Failure
+ * 0 = No link failure detected
+ * 1 = Link failure detected
+ * [ 5: 5] Initialization Complete
+ * 0 = Initialization not complete
+ * 1 = Initialization complete
+ * [ 6: 6] Receiver off
+ * 0 = Recevier on
+ * 1 = Receiver off
+ * [ 7: 7] Transmitter Off
+ * 0 = Transmitter on
+ * 1 = Transmitter off
+ * [ 9: 8] CRC_Error
+ * 00 = No error
+ * [0] = 1 Error on byte lane 0
+ * [1] = 1 Error on byte lane 1
+ * [12:12] Isochrnous Enable (Read-Only)
+ * [13:13] HT Stop Tristate Enable
+ * 0 = Driven during an LDTSTOP_L
+ * 1 = Tristated during and LDTSTOP_L
+ * [14:14] Extended CTL Time
+ * 0 = CTL is asserted for 16 bit times during link initialization
+ * 1 = CTL is asserted for 50us during link initialization
+ * [18:16] Max Link Width In (Read-Only?)
+ * 000 = 8 bit link
+ * 001 = 16bit link
+ * [19:19] Doubleword Flow Control in (Read-Only)
+ * 0 = This link does not support doubleword flow control
+ * 1 = This link supports doubleword flow control
+ * [22:20] Max Link Width Out (Read-Only?)
+ * 000 = 8 bit link
+ * 001 = 16bit link
+ * [23:23] Doubleworld Flow Control out (Read-Only)
+ * 0 = This link does not support doubleword flow control
+ * 1 = This link supports doubleworkd flow control
+ * [26:24] Link Width In
+ * 000 = Use 8 bits
+ * 001 = Use 16 bits
+ * 010 = reserved
+ * 011 = Use 32 bits
+ * 100 = Use 2 bits
+ * 101 = Use 4 bits
+ * 110 = reserved
+ * 111 = Link physically not connected
+ * [27:27] Doubleword Flow Control In Enable
+ * 0 = Doubleword flow control disabled
+ * 1 = Doubleword flow control enabled (Not currently supported)
+ * [30:28] Link Width Out
+ * 000 = Use 8 bits
+ * 001 = Use 16 bits
+ * 010 = reserved
+ * 011 = Use 32 bits
+ * 100 = Use 2 bits
+ * 101 = Use 4 bits
+ * 110 = reserved
+ * 111 = Link physically not connected
+ * [31:31] Doubleworld Flow Control Out Enable
+ * 0 = Doubleworld flow control disabled
+ * 1 = Doubleword flow control enabled (Not currently supported)
+ */
+ PCI_ADDR(0, 0x18, 0, 0x84), 0x00009c05, 0x11110020,
+ /* LDTi Frequency/Revision Registers
+ * F0:0x88 i = 0,
+ * F0:0xA8 i = 1,
+ * F0:0xC8 i = 2,
+ * [ 4: 0] Minor Revision
+ * Contains the HT Minor revision
+ * [ 7: 5] Major Revision
+ * Contains the HT Major revision
+ * [11: 8] Link Frequency (Takes effect the next time the link is reconnected)
+ * 0000 = 200Mhz
+ * 0001 = reserved
+ * 0010 = 400Mhz
+ * 0011 = reserved
+ * 0100 = 600Mhz
+ * 0101 = 800Mhz
+ * 0110 = 1000Mhz
+ * 0111 = reserved
+ * 1000 = reserved
+ * 1001 = reserved
+ * 1010 = reserved
+ * 1011 = reserved
+ * 1100 = reserved
+ * 1101 = reserved
+ * 1110 = reserved
+ * 1111 = 100 Mhz
+ * [15:12] Error (Not currently Implemented)
+ * [31:16] Indicates the frequency capabilities of the link
+ * [16] = 1 encoding 0000 of freq supported
+ * [17] = 1 encoding 0001 of freq supported
+ * [18] = 1 encoding 0010 of freq supported
+ * [19] = 1 encoding 0011 of freq supported
+ * [20] = 1 encoding 0100 of freq supported
+ * [21] = 1 encoding 0101 of freq supported
+ * [22] = 1 encoding 0110 of freq supported
+ * [23] = 1 encoding 0111 of freq supported
+ * [24] = 1 encoding 1000 of freq supported
+ * [25] = 1 encoding 1001 of freq supported
+ * [26] = 1 encoding 1010 of freq supported
+ * [27] = 1 encoding 1011 of freq supported
+ * [28] = 1 encoding 1100 of freq supported
+ * [29] = 1 encoding 1101 of freq supported
+ * [30] = 1 encoding 1110 of freq supported
+ * [31] = 1 encoding 1111 of freq supported
+ */
+ PCI_ADDR(0, 0x18, 0, 0x88), 0xfffff0ff, 0x00000200,
+ /* LDTi Feature Capability
+ * F0:0x8C i = 0,
+ * F0:0xAC i = 1,
+ * F0:0xCC i = 2,
+ */
+ /* LDTi Buffer Count Registers
+ * F0:0x90 i = 0,
+ * F0:0xB0 i = 1,
+ * F0:0xD0 i = 2,
+ */
+ /* LDTi Bus Number Registers
+ * F0:0x94 i = 0,
+ * F0:0xB4 i = 1,
+ * F0:0xD4 i = 2,
+ * For NonCoherent HT specifies the bus number downstream (behind the host bridge)
+ * [ 0: 7] Primary Bus Number
+ * [15: 8] Secondary Bus Number
+ * [23:15] Subordiante Bus Number
+ * [31:24] reserved
+ */
+ PCI_ADDR(0, 0x18, 0, 0x94), 0xff000000, 0x00ff0000,
+ /* LDTi Type Registers
+ * F0:0x98 i = 0,
+ * F0:0xB8 i = 1,
+ * F0:0xD8 i = 2,
+ */
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
+#endif
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
+#endif
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
+ PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
+#endif
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration regin i
+ */
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+
+ };
+ int i;
+ int max;
+ print_debug("setting up coherent ht domain....\r\n");
+ max = sizeof(register_values)/sizeof(register_values[0]);
+ for(i = 0; i < max; i += 3) {
+ unsigned long reg;
+#if 0
+ print_debug_hex32(register_values[i]);
+ print_debug(" <-");
+ print_debug_hex32(register_values[i+2]);
+ print_debug("\r\n");
+#endif
+ reg = pci_read_config32(register_values[i]);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2] & ~register_values[i+1];
+ pci_write_config32(register_values[i], reg);
+ }
+ print_debug("done.\r\n");
+}
+
diff --git a/src/northbridge/amd/amdk8/early_ht.c b/src/northbridge/amd/amdk8/early_ht.c
new file mode 100644
index 0000000000..36e5b9a39f
--- /dev/null
+++ b/src/northbridge/amd/amdk8/early_ht.c
@@ -0,0 +1,49 @@
+static void enumerate_ht_chain(void)
+{
+ /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
+ * On most boards this just happens. If a cpu has multiple
+ * non Coherent links the appropriate bus registers for the
+ * links needs to be programed to point at bus 0.
+ */
+ unsigned next_unitid, last_unitid;;
+ next_unitid = 1;
+ do {
+ uint32_t id;
+ uint8_t hdr_type, pos;
+ last_unitid = next_unitid;
+
+ id = pci_read_config32(PCI_ADDR(0,0,0,PCI_VENDOR_ID));
+ /* If the chain is enumerated quit */
+ if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0x0000)) {
+ break;
+ }
+ hdr_type = pci_read_config8(PCI_ADDR(0,0,0,PCI_HEADER_TYPE));
+ pos = 0;
+ hdr_type &= 0x7f;
+
+ if ((hdr_type == PCI_HEADER_TYPE_NORMAL) ||
+ (hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
+ pos = pci_read_config8(PCI_ADDR(0,0,0, PCI_CAPABILITY_LIST));
+ }
+ while(pos != 0) {
+ uint8_t cap;
+ cap = pci_read_config8(PCI_ADDR(0,0,0, pos + PCI_CAP_LIST_ID));
+ if (cap == PCI_CAP_ID_HT) {
+ uint16_t flags;
+ flags = pci_read_config16(PCI_ADDR(0,0,0, pos + PCI_CAP_FLAGS));
+ if ((flags >> 13) == 0) {
+ unsigned count;
+ flags &= ~0x1f;
+ flags |= next_unitid & 0x1f;
+ count = (flags >> 5) & 0x1f;
+ pci_write_config16(PCI_ADDR(0, 0, 0, pos + PCI_CAP_FLAGS), flags);
+ next_unitid += count;
+ break;
+ }
+ }
+ pos = pci_read_config8(PCI_ADDR(0, 0, 0, pos + PCI_CAP_LIST_NEXT));
+ }
+ } while((last_unitid != next_unitid) && (next_unitid <= 0x1f));
+}
diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c
new file mode 100644
index 0000000000..156b80a6a6
--- /dev/null
+++ b/src/northbridge/amd/amdk8/raminit.c
@@ -0,0 +1,792 @@
+#define MEMORY_512MB 0 /* SuSE Solo configuration */
+#define MEMORY_1024MB 1 /* LNXI Solo configuration */
+
+static void sdram_set_registers(void)
+{
+ static const unsigned int register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
+#endif
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
+#endif
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
+ PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
+#endif
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration regin i
+ */
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+
+ /* DRAM CS Base Address i Registers
+ * F2:0x40 i = 0
+ * F2:0x44 i = 1
+ * F2:0x48 i = 2
+ * F2:0x4C i = 3
+ * F2:0x50 i = 4
+ * F2:0x54 i = 5
+ * F2:0x58 i = 6
+ * F2:0x5C i = 7
+ * [ 0: 0] Chip-Select Bank Enable
+ * 0 = Bank Disabled
+ * 1 = Bank Enabled
+ * [ 8: 1] Reserved
+ * [15: 9] Base Address (19-13)
+ * An optimization used when all DIMM are the same size...
+ * [20:16] Reserved
+ * [31:21] Base Address (35-25)
+ * This field defines the top 11 addresses bit of a 40-bit
+ * address that define the memory address space. These
+ * bits decode 32-MByte blocks of memory.
+ */
+ PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000001,
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x01000001,
+ PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x02000001,
+ PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x03000001,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00800001,
+ PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x01000001,
+ PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x01800001,
+#endif
+ PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x58), 0x001f01fe, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x5C), 0x001f01fe, 0x00000000,
+ /* DRAM CS Mask Address i Registers
+ * F2:0x60 i = 0
+ * F2:0x64 i = 1
+ * F2:0x68 i = 2
+ * F2:0x6C i = 3
+ * F2:0x70 i = 4
+ * F2:0x74 i = 5
+ * F2:0x78 i = 6
+ * F2:0x7C i = 7
+ * Select bits to exclude from comparison with the DRAM Base address register.
+ * [ 8: 0] Reserved
+ * [15: 9] Address Mask (19-13)
+ * Address to be excluded from the optimized case
+ * [20:16] Reserved
+ * [29:21] Address Mask (33-25)
+ * The bits with an address mask of 1 are excluded from address comparison
+ * [31:30] Reserved
+ *
+ */
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00e0fe00,
+ PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00e0fe00,
+ PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00e0fe00,
+ PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00e0fe00,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x0060fe00,
+ PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x0060fe00,
+ PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x0060fe00,
+ PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x0060fe00,
+#endif
+ PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x78), 0xC01f01ff, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x7C), 0xC01f01ff, 0x00000000,
+ /* DRAM Bank Address Mapping Register
+ * F2:0x80
+ * Specify the memory module size
+ * [ 2: 0] CS1/0
+ * [ 6: 4] CS3/2
+ * [10: 8] CS5/4
+ * [14:12] CS7/6
+ * 000 = 32Mbyte (Rows = 12 & Col = 8)
+ * 001 = 64Mbyte (Rows = 12 & Col = 9)
+ * 010 = 128Mbyte (Rows = 13 & Col = 9)|(Rows = 12 & Col = 10)
+ * 011 = 256Mbyte (Rows = 13 & Col = 10)|(Rows = 12 & Col = 11)
+ * 100 = 512Mbyte (Rows = 13 & Col = 11)|(Rows = 14 & Col = 10)
+ * 101 = 1Gbyte (Rows = 14 & Col = 11)|(Rows = 13 & Col = 12)
+ * 110 = 2Gbyte (Rows = 14 & Col = 12)
+ * 111 = reserved
+ * [ 3: 3] Reserved
+ * [ 7: 7] Reserved
+ * [11:11] Reserved
+ * [31:15]
+ */
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000033,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000022,
+#endif
+ /* DRAM Timing Low Register
+ * F2:0x88
+ * [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid)
+ * 000 = reserved
+ * 001 = CL 2
+ * 010 = CL 3
+ * 011 = reserved
+ * 100 = reserved
+ * 101 = CL 2.5
+ * 110 = reserved
+ * 111 = reserved
+ * [ 3: 3] Reserved
+ * [ 7: 4] Trc (Row Cycle Time, Ras#-active to Ras#-active/bank auto refresh)
+ * 0000 = 7 bus clocks
+ * 0001 = 8 bus clocks
+ * ...
+ * 1110 = 21 bus clocks
+ * 1111 = 22 bus clocks
+ * [11: 8] Trfc (Row refresh Cycle time, Auto-refresh-active to RAS#-active or RAS#auto-refresh)
+ * 0000 = 9 bus clocks
+ * 0010 = 10 bus clocks
+ * ....
+ * 1110 = 23 bus clocks
+ * 1111 = 24 bus clocks
+ * [14:12] Trcd (Ras#-active to Case#-read/write Delay)
+ * 000 = reserved
+ * 001 = reserved
+ * 010 = 2 bus clocks
+ * 011 = 3 bus clocks
+ * 100 = 4 bus clocks
+ * 101 = 5 bus clocks
+ * 110 = 6 bus clocks
+ * 111 = reserved
+ * [15:15] Reserved
+ * [18:16] Trrd (Ras# to Ras# Delay)
+ * 000 = reserved
+ * 001 = reserved
+ * 010 = 2 bus clocks
+ * 011 = 3 bus clocks
+ * 100 = 4 bus clocks
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = reserved
+ * [19:19] Reserved
+ * [23:20] Tras (Minmum Ras# Active Time)
+ * 0000 to 0100 = reserved
+ * 0101 = 5 bus clocks
+ * ...
+ * 1111 = 15 bus clocks
+ * [26:24] Trp (Row Precharge Time)
+ * 000 = reserved
+ * 001 = reserved
+ * 010 = 2 bus clocks
+ * 011 = 3 bus clocks
+ * 100 = 4 bus clocks
+ * 101 = 5 bus clocks
+ * 110 = 6 bus clocks
+ * 111 = reserved
+ * [27:27] Reserved
+ * [28:28] Twr (Write Recovery Time)
+ * 0 = 2 bus clocks
+ * 1 = 3 bus clocks
+ * [31:29] Reserved
+ */
+ PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x03623125,
+ /* DRAM Timing High Register
+ * F2:0x8C
+ * [ 0: 0] Twtr (Write to Read Delay)
+ * 0 = 1 bus Clocks
+ * 1 = 2 bus Clocks
+ * [ 3: 1] Reserved
+ * [ 6: 4] Trwf (Read to Write Delay)
+ * 000 = 1 bus clocks
+ * 001 = 2 bus clocks
+ * 010 = 3 bus clocks
+ * 011 = 4 bus clocks
+ * 100 = 5 bus clocks
+ * 101 = 6 bus clocks
+ * 110 = reserved
+ * 111 = reserved
+ * [ 7: 7] Reserved
+ * [12: 8] Tref (Refresh Rate)
+ * 00000 = 100Mhz 4K rows
+ * 00001 = 133Mhz 4K rows
+ * 00010 = 166Mhz 4K rows
+ * 01000 = 100Mhz 8K/16K rows
+ * 01001 = 133Mhz 8K/16K rows
+ * 01010 = 166Mhz 8K/16K rows
+ * [19:13] Reserved
+ * [22:20] Twcl (Write CAS Latency)
+ * 000 = 1 Mem clock after CAS# (Unbuffered Dimms)
+ * 001 = 2 Mem clocks after CAS# (Registered Dimms)
+ * [31:23] Reserved
+ */
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000930,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000130,
+#endif
+
+ /* DRAM Config Low Register
+ * F2:0x90
+ * [ 0: 0] DLL Disable
+ * 0 = Enabled
+ * 1 = Disabled
+ * [ 1: 1] D_DRV
+ * 0 = Normal Drive
+ * 1 = Weak Drive
+ * [ 2: 2] QFC_EN
+ * 0 = Disabled
+ * 1 = Enabled
+ * [ 3: 3] Disable DQS Hystersis (FIXME handle this one carefully)
+ * 0 = Enable DQS input filter
+ * 1 = Disable DQS input filtering
+ * [ 7: 4] Reserved
+ * [ 8: 8] DRAM_Init
+ * 0 = Initialization done or not yet started.
+ * 1 = Initiate DRAM intialization sequence
+ * [ 9: 9] SO-Dimm Enable
+ * 0 = Do nothing
+ * 1 = SO-Dimms present
+ * [10:10] DramEnable
+ * 0 = DRAM not enabled
+ * 1 = DRAM initialized and enabled
+ * [11:11] Memory Clear Status
+ * 0 = Memory Clear function has not completed
+ * 1 = Memory Clear function has completed
+ * [12:12] Exit Self-Refresh
+ * 0 = Exit from self-refresh done or not yet started
+ * 1 = DRAM exiting from self refresh
+ * [13:13] Self-Refresh Status
+ * 0 = Normal Operation
+ * 1 = Self-refresh mode active
+ * [15:14] Read/Write Queue Bypass Count
+ * 00 = 2
+ * 01 = 4
+ * 10 = 8
+ * 11 = 16
+ * [16:16] 128-bit/64-Bit
+ * 0 = 64bit Interface to DRAM
+ * 1 = 128bit Interface to DRAM
+ * [17:17] DIMM ECC Enable
+ * 0 = Some DIMMs do not have ECC
+ * 1 = ALL DIMMS have ECC bits
+ * [18:18] UnBuffered DIMMs
+ * 0 = Buffered DIMMS
+ * 1 = Unbuffered DIMMS
+ * [19:19] Enable 32-Byte Granularity
+ * 0 = Optimize for 64byte bursts
+ * 1 = Optimize for 32byte bursts
+ * [20:20] DIMM 0 is x4
+ * [21:21] DIMM 1 is x4
+ * [22:22] DIMM 2 is x4
+ * [23:23] DIMM 3 is x4
+ * 0 = DIMM is not x4
+ * 1 = x4 DIMM present
+ * [24:24] Disable DRAM Receivers
+ * 0 = Receivers enabled
+ * 1 = Receivers disabled
+ * [27:25] Bypass Max
+ * 000 = Arbiters chois is always respected
+ * 001 = Oldest entry in DCQ can be bypassed 1 time
+ * 010 = Oldest entry in DCQ can be bypassed 2 times
+ * 011 = Oldest entry in DCQ can be bypassed 3 times
+ * 100 = Oldest entry in DCQ can be bypassed 4 times
+ * 101 = Oldest entry in DCQ can be bypassed 5 times
+ * 110 = Oldest entry in DCQ can be bypassed 6 times
+ * 111 = Oldest entry in DCQ can be bypassed 7 times
+ * [31:28] Reserved
+ */
+ PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000,
+ (4 << 25)|(0 << 24)|
+ (0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)|
+ (1 << 19)|(1 << 18)|(0 << 17)|(0 << 16)|
+ (2 << 14)|(0 << 13)|(0 << 12)|
+ (0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)|
+ (0 << 3) |(0 << 1) |(0 << 0),
+ /* DRAM Config High Register
+ * F2:0x94
+ * [ 0: 3] Maximum Asynchronous Latency
+ * 0000 = 0 ns
+ * ...
+ * 1111 = 15 ns
+ * [ 7: 4] Reserved
+ * [11: 8] Read Preamble
+ * 0000 = 2.0 ns
+ * 0001 = 2.5 ns
+ * 0010 = 3.0 ns
+ * 0011 = 3.5 ns
+ * 0100 = 4.0 ns
+ * 0101 = 4.5 ns
+ * 0110 = 5.0 ns
+ * 0111 = 5.5 ns
+ * 1000 = 6.0 ns
+ * 1001 = 6.5 ns
+ * 1010 = 7.0 ns
+ * 1011 = 7.5 ns
+ * 1100 = 8.0 ns
+ * 1101 = 8.5 ns
+ * 1110 = 9.0 ns
+ * 1111 = 9.5 ns
+ * [15:12] Reserved
+ * [18:16] Idle Cycle Limit
+ * 000 = 0 cycles
+ * 001 = 4 cycles
+ * 010 = 8 cycles
+ * 011 = 16 cycles
+ * 100 = 32 cycles
+ * 101 = 64 cycles
+ * 110 = 128 cycles
+ * 111 = 256 cycles
+ * [19:19] Dynamic Idle Cycle Center Enable
+ * 0 = Use Idle Cycle Limit
+ * 1 = Generate a dynamic Idle cycle limit
+ * [22:20] DRAM MEMCLK Frequency
+ * 000 = 100Mhz
+ * 001 = reserved
+ * 010 = 133Mhz
+ * 011 = reserved
+ * 100 = reserved
+ * 101 = 166Mhz
+ * 110 = reserved
+ * 111 = reserved
+ * [24:23] Reserved
+ * [25:25] Memory Clock Ratio Valid (FIXME carefully enable memclk)
+ * 0 = Disable MemClks
+ * 1 = Enable MemClks
+ * [26:26] Memory Clock 0 Enable
+ * 0 = Disabled
+ * 1 = Enabled
+ * [27:27] Memory Clock 1 Enable
+ * 0 = Disabled
+ * 1 = Enabled
+ * [28:28] Memory Clock 2 Enable
+ * 0 = Disabled
+ * 1 = Enabled
+ * [29:29] Memory Clock 3 Enable
+ * 0 = Disabled
+ * 1 = Enabled
+ * [31:30] Reserved
+ */
+#if MEMORY_1024MB
+ PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a05,
+#endif
+#if MEMORY_512MB
+ PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a06,
+#endif
+ /* DRAM Delay Line Register
+ * F2:0x98
+ * Adjust the skew of the input DQS strobe relative to DATA
+ * [15: 0] Reserved
+ * [23:16] Delay Line Adjust
+ * Adjusts the DLL derived PDL delay by one or more delay stages
+ * in either the faster or slower direction.
+ * [24:24} Adjust Slower
+ * 0 = Do Nothing
+ * 1 = Adj is used to increase the PDL delay
+ * [25:25] Adjust Faster
+ * 0 = Do Nothing
+ * 1 = Adj is used to decrease the PDL delay
+ * [31:26] Reserved
+ */
+ PCI_ADDR(0, 0x18, 2, 0x98), 0xfc00ffff, 0x00000000,
+ /* DRAM Scrub Control Register
+ * F3:0x58
+ * [ 4: 0] DRAM Scrube Rate
+ * [ 7: 5] reserved
+ * [12: 8] L2 Scrub Rate
+ * [15:13] reserved
+ * [20:16] Dcache Scrub
+ * [31:21] reserved
+ * Scrub Rates
+ * 00000 = Do not scrub
+ * 00001 = 40.00 ns
+ * 00010 = 80.00 ns
+ * 00011 = 160.00 ns
+ * 00100 = 320.00 ns
+ * 00101 = 640.00 ns
+ * 00110 = 1.28 us
+ * 00111 = 2.56 us
+ * 01000 = 5.12 us
+ * 01001 = 10.20 us
+ * 01011 = 41.00 us
+ * 01100 = 81.90 us
+ * 01101 = 163.80 us
+ * 01110 = 327.70 us
+ * 01111 = 655.40 us
+ * 10000 = 1.31 ms
+ * 10001 = 2.62 ms
+ * 10010 = 5.24 ms
+ * 10011 = 10.49 ms
+ * 10100 = 20.97 ms
+ * 10101 = 42.00 ms
+ * 10110 = 84.00 ms
+ * All Others = Reserved
+ */
+ PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000,
+ /* DRAM Scrub Address Low Register
+ * F3:0x5C
+ * [ 0: 0] DRAM Scrubber Redirect Enable
+ * 0 = Do nothing
+ * 1 = Scrubber Corrects errors found in normal operation
+ * [ 5: 1] Reserved
+ * [31: 6] DRAM Scrub Address 31-6
+ */
+ PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000,
+ /* DRAM Scrub Address High Register
+ * F3:0x60
+ * [ 7: 0] DRAM Scrubb Address 39-32
+ * [31: 8] Reserved
+ */
+ PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000,
+ };
+ int i;
+ int max;
+ print_debug("setting up CPU0 northbridge registers\r\n");
+ max = sizeof(register_values)/sizeof(register_values[0]);
+ for(i = 0; i < max; i += 3) {
+ unsigned long reg;
+#if 0
+ print_debug_hex32(register_values[i]);
+ print_debug(" <-");
+ print_debug_hex32(register_values[i+2]);
+ print_debug("\r\n");
+#endif
+ reg = pci_read_config32(register_values[i]);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2];
+ pci_write_config32(register_values[i], reg);
+ }
+ print_debug("done.\r\n");
+}
+
+#define DRAM_CONFIG_LOW 0x90
+#define DCL_DLL_Disable (1<<0)
+#define DCL_D_DRV (1<<1)
+#define DCL_QFC_EN (1<<2)
+#define DCL_DisDqsHys (1<<3)
+#define DCL_DramInit (1<<8)
+#define DCL_DramEnable (1<<10)
+#define DCL_MemClrStatus (1<<11)
+#define DCL_DimmEcEn (1<<17)
+
+#define NODE_ID 0x60
+#define HT_INIT_CONTROL 0x6c
+
+#define HTIC_ColdR_Detect (1<<4)
+#define HTIC_BIOSR_Detect (1<<5)
+#define HTIC_INIT_Detect (1<<6)
+
+static void sdram_set_spd_registers(void)
+{
+ unsigned long dcl;
+ dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
+ /* Until I know what is going on disable ECC support */
+ dcl &= ~DCL_DimmEcEn;
+ pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl);
+}
+
+#define TIMEOUT_LOOPS 300000
+static void sdram_enable(void)
+{
+ unsigned long dcl;
+
+ /* Toggle DisDqsHys to get it working */
+ dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
+ print_debug("dcl: ");
+ print_debug_hex32(dcl);
+ print_debug("\r\n");
+ dcl |= DCL_DisDqsHys;
+ pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl);
+ dcl &= ~DCL_DisDqsHys;
+ dcl &= ~DCL_DLL_Disable;
+ dcl &= ~DCL_D_DRV;
+ dcl &= ~DCL_QFC_EN;
+ dcl |= DCL_DramInit;
+ pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl);
+
+ print_debug("Initializing memory: ");
+ int loops = 0;
+ do {
+ dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
+ loops += 1;
+ if ((loops & 1023) == 0) {
+ print_debug(".");
+ }
+ } while(((dcl & DCL_DramInit) != 0) && (loops < TIMEOUT_LOOPS));
+ if (loops >= TIMEOUT_LOOPS) {
+ print_debug(" failed\r\n");
+ } else {
+ print_debug(" done\r\n");
+ }
+
+#if 0
+ print_debug("Clearing memory: ");
+ loops = 0;
+ do {
+ dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
+ loops += 1;
+ if ((loops & 1023) == 0) {
+ print_debug(" ");
+ print_debug_hex32(loops);
+ }
+ } while(((dcl & DCL_MemClrStatus) == 0) && (loops < TIMEOUT_LOOPS));
+ if (loops >= TIMEOUT_LOOPS) {
+ print_debug("failed\r\n");
+ } else {
+ print_debug("done\r\n");
+ }
+#endif
+}
+
+static void sdram_first_normal_reference(void) {}
+static void sdram_enable_refresh(void) {}
+static void sdram_special_finishup(void) {}
+
diff --git a/src/pc80/mc146818rtc_early.c b/src/pc80/mc146818rtc_early.c
new file mode 100644
index 0000000000..1d268f0482
--- /dev/null
+++ b/src/pc80/mc146818rtc_early.c
@@ -0,0 +1,84 @@
+#include <pc80/mc146818rtc.h>
+#include <part/fallback_boot.h>
+
+static unsigned char cmos_read(unsigned char addr)
+{
+ outb(addr, RTC_BASE_PORT + 0);
+ return inb(RTC_BASE_PORT + 1);
+}
+
+static void cmos_write(unsigned char val, unsigned char addr)
+{
+ outb(addr, RTC_BASE_PORT + 0);
+ outb(val, RTC_BASE_PORT + 1);
+}
+
+static int cmos_error(void)
+{
+ unsigned char reg_d;
+ /* See if the cmos error condition has been flagged */
+ reg_d = cmos_read(RTC_REG_D);
+ return (reg_d & RTC_VRT) == 0;
+}
+
+static int cmos_chksum_valid(void)
+{
+ unsigned char addr;
+ unsigned long sum, old_sum;
+ sum = 0;
+ /* Comput the cmos checksum */
+ for(addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) {
+ sum += cmos_read(addr);
+ }
+ sum = (sum & 0xffff) ^ 0xffff;
+
+ /* Read the stored checksum */
+ old_sum = cmos_read(LB_CKS_LOC) << 8;
+ old_sum |= cmos_read(LB_CKS_LOC+1);
+
+ return sum == old_sum;
+}
+
+
+static int do_normal_boot(void)
+{
+ unsigned char byte;
+
+ if (cmos_error() || !cmos_chksum_valid()) {
+ unsigned char byte;
+ /* There are no impossible values, no cheksums so just
+ * trust whatever value we have in the the cmos,
+ * but clear the fallback bit.
+ */
+ byte = cmos_read(RTC_BOOT_BYTE);
+ byte &= 0x0c;
+ byte |= MAX_REBOOT_CNT << 4;
+ cmos_write(byte, RTC_BOOT_BYTE);
+ }
+
+ /* The RTC_BOOT_BYTE is now o.k. see where to go. */
+ byte = cmos_read(RTC_BOOT_BYTE);
+
+ /* Are we in normal mode? */
+ if (byte & 1) {
+ byte &= 0x0f; /* yes, clear the boot count */
+ }
+
+ /* Are we already at the max count? */
+ if ((byte >> 4) < MAX_REBOOT_CNT) {
+ byte += 1 << 4; /* No, add 1 to the count */
+ }
+ else {
+ byte &= 0xfc; /* Yes, put in fallback mode */
+ }
+
+ /* Is this the first boot? */
+ if ((byte >> 4) <= 1) {
+ byte = (byte & 0xfc) | ((byte & 1) << 1); /* yes, shift the boot bits */
+ }
+
+ /* Save the boot byte */
+ cmos_write(byte, RTC_BOOT_BYTE);
+
+ return ((byte >> 4) < MAX_REBOOT_CNT);
+}
diff --git a/src/southbridge/amd/amd8111/amd8111_early_smbus.c b/src/southbridge/amd/amd8111/amd8111_early_smbus.c
new file mode 100644
index 0000000000..b0b8e4955f
--- /dev/null
+++ b/src/southbridge/amd/amd8111/amd8111_early_smbus.c
@@ -0,0 +1,108 @@
+#define SMBUS_IO_BASE 0x1000
+
+#define SMBGSTATUS 0xe0
+#define SMBGCTL 0xe2
+#define SMBHSTADDR 0xe4
+#define SMBHSTDAT 0xe6
+#define SMBHSTCMD 0xe8
+#define SMBHSTFIFO 0xe9
+
+#define SMBUS_TIMEOUT (100*1000*10)
+
+static void enable_smbus(void)
+{
+ uint32_t addr;
+ addr = pci_locate_device(PCI_ID(0x1022, 0x746b), 0);
+ if (addr == ~0U) {
+ die("SMBUS controller not found\r\n");
+ }
+ uint8_t enable;
+ print_debug("SMBus controller enabled\r\n");
+ pci_write_config32(addr + 0x58, SMBUS_IO_BASE | 1);
+ enable = pci_read_config8(addr + 0x41);
+ pci_write_config8(addr + 0x41, enable | (1 << 7));
+}
+
+
+static inline void smbus_delay(void)
+{
+ outb(0x80, 0x80);
+}
+
+static int smbus_wait_until_ready(void)
+{
+ unsigned long loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ unsigned short val;
+ smbus_delay();
+ val = inw(SMBUS_IO_BASE + SMBGSTATUS);
+ if ((val & 0x800) == 0) {
+ break;
+ }
+ } while(--loops);
+ return loops?0:-1;
+}
+
+static int smbus_wait_until_done(void)
+{
+ unsigned long loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ unsigned short val;
+ smbus_delay();
+
+ val = inw(SMBUS_IO_BASE + SMBGSTATUS);
+ if (((val & 0x8) == 0) || ((val & 0x437) != 0)) {
+ break;
+ }
+ } while(--loops);
+ return loops?0:-1;
+}
+
+static int smbus_read_byte(unsigned device, unsigned address)
+{
+ unsigned char global_control_register;
+ unsigned char global_status_register;
+ unsigned char byte;
+
+ if (smbus_wait_until_ready() < 0) {
+ return -1;
+ }
+
+ /* setup transaction */
+ /* disable interrupts */
+ outw(inw(SMBUS_IO_BASE + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), SMBUS_IO_BASE + SMBGCTL);
+ /* set the device I'm talking too */
+ outw(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADDR);
+ /* set the command/address... */
+ outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+ /* set up for a byte data read */
+ outw((inw(SMBUS_IO_BASE + SMBGCTL) & ~7) | (0x2), SMBUS_IO_BASE + SMBGCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ /* Do I need to write the bits to a 1 to clear an error? */
+ outw(inw(SMBUS_IO_BASE + SMBGSTATUS), SMBUS_IO_BASE + SMBGSTATUS);
+
+ /* clear the data word...*/
+ outw(0, SMBUS_IO_BASE + SMBHSTDAT);
+
+ /* start the command */
+ outw((inw(SMBUS_IO_BASE + SMBGCTL) | (1 << 3)), SMBUS_IO_BASE + SMBGCTL);
+
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done() < 0) {
+ return -1;
+ }
+
+ global_status_register = inw(SMBUS_IO_BASE + SMBGSTATUS);
+
+ /* read results of transaction */
+ byte = inw(SMBUS_IO_BASE + SMBHSTDAT) & 0xff;
+
+ if (global_status_register != (1 << 4)) {
+ return -1;
+ }
+ return byte;
+}
diff --git a/src/southbridge/amd/amd8111/amd8111_enable_rom.c b/src/southbridge/amd/amd8111/amd8111_enable_rom.c
new file mode 100644
index 0000000000..d6045c3620
--- /dev/null
+++ b/src/southbridge/amd/amd8111/amd8111_enable_rom.c
@@ -0,0 +1,18 @@
+
+static void amd8111_enable_rom(void)
+{
+ unsigned char byte;
+ uint32_t addr;
+
+ /* Enable 4MB rom access at 0xFFC00000 - 0xFFFFFFFF */
+ /* Locate the amd8111 */
+ addr = pci_locate_device(PCI_ID(0x1022, 0x7468), 0);
+
+ /* Refine the address to point at the rom enable byte */
+ addr += 0x43;
+
+ /* Set the 4MB enable bit bit */
+ byte = pci_read_config8(addr);
+ byte |= 0x80;
+ pci_write_config8(addr, byte);
+}
diff --git a/util/romcc/Makefile b/util/romcc/Makefile
index ad209a5247..d2d4e7dcb9 100644
--- a/util/romcc/Makefile
+++ b/util/romcc/Makefile
@@ -7,12 +7,16 @@ PACKAGE:=romcc
CC=gcc
CPPFLAGS=-DVERSION='"$(VERSION)"' -DRELEASE_DATE='"$(RELEASE_DATE)"'
CFLAGS=-O -g -Wall $(CPPFLAGS)
+CPROF_FLAGS=-pg -fprofile-arcs
all: romcc test
romcc: romcc.c Makefile
$(CC) $(CFLAGS) -o $@ $<
+romcc_pg: romcc.c Makefile
+ $(CC) $(CFLAGS) $(CPROF_FLAGS) -o $@ $<
+
TESTS=\
hello_world.c \
simple_test.c \
@@ -45,6 +49,7 @@ TESTS=\
simple_test28.c \
simple_test29.c \
simple_test30.c \
+ simple_test31.c \
raminit_test.c \
raminit_test2.c \
raminit_test3.c
diff --git a/util/romcc/romcc.c b/util/romcc/romcc.c
index 255b6d4995..561ba24110 100644
--- a/util/romcc/romcc.c
+++ b/util/romcc/romcc.c
@@ -17,6 +17,8 @@
#define DEBUG_SCC 0
#define DEBUG_CONSISTENCY 1
+#warning "FIXME boundary cases with small types in larger registers"
+
/* Control flow graph of a loop without goto.
*
* AAA
@@ -737,6 +739,7 @@ struct hash_entry {
#define HASH_TABLE_SIZE 2048
struct compile_state {
+ const char *label_prefix;
const char *ofilename;
FILE *output;
struct triple *vars;
@@ -9806,28 +9809,6 @@ static int tdominates(struct compile_state *state,
return result;
}
-static int tdistance(struct compile_state *state,
- struct triple *dom, struct triple *sub)
-{
- int count;
- struct block *bdom, *bsub;
- if (!tdominates(state, dom, sub)) {
- internal_error(state, 0, "dom does not dom sub");
- }
- bdom = block_of_triple(state, dom);
- bsub = block_of_triple(state, sub);
- count = 0;
- for(; bsub != bdom; (bsub = bsub->idom), sub = bsub->last) {
- for(; sub != bsub->first; sub = sub->prev) {
- count++;
- }
- }
- for(; sub != dom; sub = sub->prev) {
- count++;
- }
- return count;
-}
-
static void insert_phi_operations(struct compile_state *state)
{
size_t size;
@@ -9864,6 +9845,9 @@ static void insert_phi_operations(struct compile_state *state)
if (!block) {
warning(state, user->member, "dead code");
}
+ if (work[block->vertex] >= iter) {
+ continue;
+ }
work[block->vertex] = iter;
*work_list_tail = block;
block->work_next = 0;
@@ -9897,7 +9881,7 @@ static void insert_phi_operations(struct compile_state *state)
front->last = front->first->next;
}
has_already[front->vertex] = iter;
-
+
/* If necessary plan to visit the basic block */
if (work[front->vertex] >= iter) {
continue;
@@ -11972,6 +11956,7 @@ static int coalesce_live_ranges(
}
}
next:
+ ;
}
return coalesced;
}
@@ -12220,6 +12205,7 @@ static struct triple *least_conflict(struct compile_state *state,
}
do_triple_set(&conflict->live, set->member, set->new);
next:
+ ;
}
}
return ins;
@@ -12325,6 +12311,7 @@ static struct triple *split_constrained_range(struct compile_state *state,
constrained_size = size;
}
next:
+ ;
}
if (constrained) {
new = post_copy(state, constrained);
@@ -14021,6 +14008,10 @@ static void optimize(struct compile_state *state)
/* Transform the code to ssa form */
transform_to_ssa_form(state);
verify_consistency(state);
+ if (state->debug & DEBUG_CODE_ELIMINATION) {
+ fprintf(stdout, "After transform_to_ssa_form\n");
+ print_blocks(state, stdout);
+ }
/* Do strength reduction and simple constant optimizations */
if (state->optimize >= 1) {
simplify_all(state);
@@ -15554,7 +15545,8 @@ static void print_const_val(
(long_t)(ins->u.cval));
break;
case OP_ADDRCONST:
- fprintf(fp, " $L%lu+%lu ",
+ fprintf(fp, " $L%s%lu+%lu ",
+ state->label_prefix,
MISC(ins, 0)->u.cval,
ins->u.cval);
break;
@@ -16017,8 +16009,10 @@ static void print_op_branch(struct compile_state *state,
}
}
- fprintf(fp, "\t%s L%lu\n",
- bop, TARG(branch, 0)->u.cval);
+ fprintf(fp, "\t%s L%s%lu\n",
+ bop,
+ state->label_prefix,
+ TARG(branch, 0)->u.cval);
}
static void print_op_set(struct compile_state *state,
@@ -16128,7 +16122,7 @@ static void print_sdecl(struct compile_state *state,
{
fprintf(fp, ".section \"" DATA_SECTION "\"\n");
fprintf(fp, ".balign %d\n", align_of(state, ins->type));
- fprintf(fp, "L%lu:\n", ins->u.cval);
+ fprintf(fp, "L%s%lu:\n", state->label_prefix, ins->u.cval);
print_const(state, MISC(ins, 0), fp);
fprintf(fp, ".section \"" TEXT_SECTION "\"\n");
@@ -16219,7 +16213,7 @@ static void print_instruction(struct compile_state *state,
if (!ins->use) {
return;
}
- fprintf(fp, "L%lu:\n", ins->u.cval);
+ fprintf(fp, "L%s%lu:\n", state->label_prefix, ins->u.cval);
break;
/* Ignore OP_PIECE */
case OP_PIECE:
@@ -16299,7 +16293,7 @@ static void print_tokens(struct compile_state *state)
}
static void compile(const char *filename, const char *ofilename,
- int cpu, int debug, int opt)
+ int cpu, int debug, int opt, const char *label_prefix)
{
int i;
struct compile_state state;
@@ -16320,6 +16314,8 @@ static void compile(const char *filename, const char *ofilename,
error(&state, 0, "Cannot open output file %s\n",
ofilename);
}
+ /* Remember the label prefix */
+ state.label_prefix = label_prefix;
/* Prep the preprocessor */
state.if_depth = 0;
state.if_value = 0;
@@ -16380,11 +16376,13 @@ int main(int argc, char **argv)
{
const char *filename;
const char *ofilename;
+ const char *label_prefix;
int cpu;
int last_argc;
int debug;
int optimize;
cpu = CPU_DEFAULT;
+ label_prefix = "";
ofilename = "auto.inc";
optimize = 0;
debug = 0;
@@ -16396,6 +16394,11 @@ int main(int argc, char **argv)
argv++;
argc--;
}
+ else if (strncmp(argv[1], "--label-prefix=", 15) == 0) {
+ label_prefix= argv[1] + 15;
+ argv++;
+ argc--;
+ }
else if ((strcmp(argv[1],"-O") == 0) ||
(strcmp(argv[1], "-O1") == 0)) {
optimize = 1;
@@ -16426,7 +16429,7 @@ int main(int argc, char **argv)
arg_error("Wrong argument count %d\n", argc);
}
filename = argv[1];
- compile(filename, ofilename, cpu, debug, optimize);
+ compile(filename, ofilename, cpu, debug, optimize, label_prefix);
return 0;
}
diff --git a/util/romcc/tests/simple_test31.c b/util/romcc/tests/simple_test31.c
new file mode 100644
index 0000000000..4ce77d3f6d
--- /dev/null
+++ b/util/romcc/tests/simple_test31.c
@@ -0,0 +1,16 @@
+
+static unsigned pci_locate_device(unsigned addr)
+{
+ addr &= ~0xff;
+ for(; addr <= 0x00ffff00; addr += 0x00000100) {
+ __builtin_outl(addr, 0x12);
+ }
+ return addr;
+}
+
+static void main(void)
+{
+ unsigned long addr;
+ addr = pci_locate_device(0);
+ __builtin_outl(addr, 0x12);
+}