summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/soc/intel/common/block/gpio/Kconfig10
-rw-r--r--src/soc/intel/common/block/sgx/Kconfig6
-rw-r--r--src/soc/intel/common/block/uart/Kconfig5
3 files changed, 12 insertions, 9 deletions
diff --git a/src/soc/intel/common/block/gpio/Kconfig b/src/soc/intel/common/block/gpio/Kconfig
index bdbc323c12..753d8e0a7e 100644
--- a/src/soc/intel/common/block/gpio/Kconfig
+++ b/src/soc/intel/common/block/gpio/Kconfig
@@ -4,42 +4,40 @@ config SOC_INTEL_COMMON_BLOCK_GPIO
help
Intel Processor common GPIO support
+if SOC_INTEL_COMMON_BLOCK_GPIO
+
# Use to program Interrupt Polarity Control (IPCx) register
# Each bit represents IRQx Active High Polarity Disable configuration:
# when set to 1, the interrupt polarity associated with IRQx is inverted
# to appear as Active Low to IOAPIC and vice versa
config SOC_INTEL_COMMON_BLOCK_GPIO_ITSS_POL_CFG
- depends on SOC_INTEL_COMMON_BLOCK_GPIO
bool
default n
# Used to configure Pad Tolerance as 1.8V or 3.3V
config SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL
- depends on SOC_INTEL_COMMON_BLOCK_GPIO
bool
default n
# Used to configure IOSSTATE and IOSTERM
config SOC_INTEL_COMMON_BLOCK_GPIO_IOSTANDBY
- depends on SOC_INTEL_COMMON_BLOCK_GPIO
bool
default n
# Used to provide support for legacy macros
config SOC_INTEL_COMMON_BLOCK_GPIO_LEGACY_MACROS
- depends on SOC_INTEL_COMMON_BLOCK_GPIO
bool
default n
# Indicate if multiple ACPI devices are used for each gpio community.
config SOC_INTEL_COMMON_BLOCK_GPIO_MULTI_ACPI_DEVICES
- depends on SOC_INTEL_COMMON_BLOCK_GPIO
bool
default n
# Indicate if SoC supports dual-routing of GPIOs (to different paths like SCI,
# NMI, SMI, IOAPIC). This is required to support IRQ and wake on the same pad.
config SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT
- depends on SOC_INTEL_COMMON_BLOCK_GPIO
bool
default n
+
+endif
diff --git a/src/soc/intel/common/block/sgx/Kconfig b/src/soc/intel/common/block/sgx/Kconfig
index 6e8323f333..771c54caa5 100644
--- a/src/soc/intel/common/block/sgx/Kconfig
+++ b/src/soc/intel/common/block/sgx/Kconfig
@@ -6,16 +6,16 @@ config SOC_INTEL_COMMON_BLOCK_SGX
help
Intel Processor common SGX support
+if SOC_INTEL_COMMON_BLOCK_SGX
+
config SOC_INTEL_COMMON_BLOCK_SGX_LOCK_MEMORY
bool
- depends on SOC_INTEL_COMMON_BLOCK_SGX
default n
help
Lock memory before SGX activation. This is only needed if MCHECK does not do it.
config SOC_INTEL_COMMON_BLOCK_SGX_ENABLE
bool "Enable Software Guard Extensions (SGX) if available"
- depends on SOC_INTEL_COMMON_BLOCK_SGX
default n
help
Intel Software Guard Extensions (SGX) is a set of new CPU instructions that can be
@@ -70,3 +70,5 @@ config SOC_INTEL_COMMON_BLOCK_SGX_PRMRR_DISABLED
bool "Disabled"
endchoice
+
+endif
diff --git a/src/soc/intel/common/block/uart/Kconfig b/src/soc/intel/common/block/uart/Kconfig
index 7d30c41402..3437ec7477 100644
--- a/src/soc/intel/common/block/uart/Kconfig
+++ b/src/soc/intel/common/block/uart/Kconfig
@@ -4,9 +4,10 @@ config SOC_INTEL_COMMON_BLOCK_UART
help
Intel Processor common UART support
+if SOC_INTEL_COMMON_BLOCK_UART
+
config INTEL_LPSS_UART_FOR_CONSOLE
bool
- depends on SOC_INTEL_COMMON_BLOCK_UART
select DRIVERS_UART_8250MEM_32
select FIXED_UART_FOR_CONSOLE
help
@@ -14,3 +15,5 @@ config INTEL_LPSS_UART_FOR_CONSOLE
for the coreboot console.
WARNING: UART_FOR_CONSOLE has to be set to a correct value,
otherwise wrong pad configurations might be selected.
+
+endif