summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/siemens/mc_apl1/mainboard.c56
1 files changed, 2 insertions, 54 deletions
diff --git a/src/mainboard/siemens/mc_apl1/mainboard.c b/src/mainboard/siemens/mc_apl1/mainboard.c
index 7c68090657..bff97ea8fe 100644
--- a/src/mainboard/siemens/mc_apl1/mainboard.c
+++ b/src/mainboard/siemens/mc_apl1/mainboard.c
@@ -8,6 +8,7 @@
#include <hwilib.h>
#include <i210.h>
#include <intelblocks/cpulib.h>
+#include <intelblocks/fast_spi.h>
#include <intelblocks/systemagent.h>
#include <soc/pci_devs.h>
#include <string.h>
@@ -23,51 +24,6 @@
#define BIOS_MAILBOX_INTERFACE 0x7084
#define RUN_BUSY_STS (1 << 31)
-/*
- * SPI Opcode Menu setup for SPIBAR lock down
- * should support most common flash chips.
- */
-#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */
-#define SPI_OPTYPE_0 0x01 /* Write, no address */
-
-#define SPI_OPMENU_1 0x02 /* PP: Page Program */
-#define SPI_OPTYPE_1 0x03 /* Write, address required */
-
-#define SPI_OPMENU_2 0x03 /* READ: Read Data */
-#define SPI_OPTYPE_2 0x02 /* Read, address required */
-
-#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */
-#define SPI_OPTYPE_3 0x00 /* Read, no address */
-
-#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */
-#define SPI_OPTYPE_4 0x03 /* Write, address required */
-
-#define SPI_OPMENU_5 0x9f /* RDID: Read ID */
-#define SPI_OPTYPE_5 0x00 /* Read, no address */
-
-#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */
-#define SPI_OPTYPE_6 0x03 /* Write, address required */
-
-#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */
-#define SPI_OPTYPE_7 0x02 /* Read, address required */
-
-#define SPI_OPMENU_UPPER ((SPI_OPMENU_7 << 24) | (SPI_OPMENU_6 << 16) | \
- (SPI_OPMENU_5 << 8) | SPI_OPMENU_4)
-#define SPI_OPMENU_LOWER ((SPI_OPMENU_3 << 24) | (SPI_OPMENU_2 << 16) | \
- (SPI_OPMENU_1 << 8) | SPI_OPMENU_0)
-
-#define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \
- (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \
- (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \
- (SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0))
-
-#define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */
-
-#define SPIBAR_OFFSET 0x3800
-#define SPI_REG_PREOP_OPTYPE 0xa4
-#define SPI_REG_OPMENU_L 0xa8
-#define SPI_REG_OPMENU_H 0xac
-
#define SD_CAP_BYP 0x810
#define SD_CAP_BYP_EN 0x5A
#define SD_CAP_BYP_REG1 0x814
@@ -233,7 +189,6 @@ static void mainboard_final(void *chip_info)
{
uint16_t cmd = 0;
struct device *dev = NULL;
- void *spi_base = NULL;
/* Do board specific things */
variant_mainboard_final();
@@ -246,14 +201,7 @@ static void mainboard_final(void *chip_info)
pci_write_config16(dev, PCI_COMMAND, cmd);
}
/* Set up SPI OPCODE menu before the controller is locked. */
- dev = PCH_DEV_SPI;
- spi_base = (void *)pci_read_config32(dev, PCI_BASE_ADDRESS_0);
- if (!spi_base)
- return;
- write32((spi_base + SPI_REG_PREOP_OPTYPE),
- ((SPI_OPTYPE << 16) | SPI_OPPREFIX));
- write32((spi_base + SPI_REG_OPMENU_L), SPI_OPMENU_LOWER);
- write32((spi_base + SPI_REG_OPMENU_H), SPI_OPMENU_UPPER);
+ fast_spi_set_opcode_menu();
/* Set SD-Card speed to HS mode only. */
dev = pcidev_path_on_root(PCH_DEVFN_SDCARD);