summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/amd/olivehill/BiosCallOuts.c16
-rw-r--r--src/mainboard/amd/parmer/BiosCallOuts.c16
-rw-r--r--src/mainboard/amd/thatcher/BiosCallOuts.c18
-rw-r--r--src/mainboard/bap/ode_e20XX/BiosCallOuts.c18
-rw-r--r--src/mainboard/biostar/a68n_5200/BiosCallOuts.c18
-rw-r--r--src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c18
-rw-r--r--src/mainboard/lenovo/g505s/BiosCallOuts.c18
7 files changed, 61 insertions, 61 deletions
diff --git a/src/mainboard/amd/olivehill/BiosCallOuts.c b/src/mainboard/amd/olivehill/BiosCallOuts.c
index 4f780b35c1..6e29d84179 100644
--- a/src/mainboard/amd/olivehill/BiosCallOuts.c
+++ b/src/mainboard/amd/olivehill/BiosCallOuts.c
@@ -95,13 +95,13 @@ static const CODEC_TBL_LIST OlivehillCodecTableList[] =
/* Olivehill Hardware Monitor Fan Control
* Hardware limitation:
- * HWM failed to read the input temperture vi I2C,
- * if other software switch the I2C switch by mistake or intention.
- * We recommend to using IMC to control Fans, instead of HWM.
+ * HWM failed to read the input temperature via I2C,
+ * if other software switches the I2C switch by mistake or intention.
+ * We recommend using IMC to control Fans, instead of HWM.
*/
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
- /* Enable IMC fan control. the recommand way */
+ /* Enable IMC fan control, the recommended way */
if (CONFIG(HUDSON_IMC_FWM)) {
imc_reg_init();
@@ -156,12 +156,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
/* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+ * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+ * So we remove it from AGESA code. Please See FchInitLateHwm.
*/
} else {
- /* HWM fan control, the way not recommand */
+ /* HWM fan control, the way not recommended */
FchParams->Imc.ImcEnable = FALSE;
FchParams->Hwm.HwMonitorEnable = TRUE;
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
diff --git a/src/mainboard/amd/parmer/BiosCallOuts.c b/src/mainboard/amd/parmer/BiosCallOuts.c
index 59d6bf6f0b..322b22019a 100644
--- a/src/mainboard/amd/parmer/BiosCallOuts.c
+++ b/src/mainboard/amd/parmer/BiosCallOuts.c
@@ -95,13 +95,13 @@ static const CODEC_TBL_LIST CodecTableList[] =
/* Parmer Hardware Monitor Fan Control
* Hardware limitation:
- * HWM failed to read the input temperture vi I2C,
- * if other software switch the I2C switch by mistake or intention.
- * We recommend to using IMC to control Fans, instead of HWM.
+ * HWM failed to read the input temperature via I2C,
+ * if other software switches the I2C switch by mistake or intention.
+ * We recommend using IMC to control Fans, instead of HWM.
*/
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
- /* Enable IMC fan control. the recommand way */
+ /* Enable IMC fan control, the recommended way */
if (CONFIG(HUDSON_IMC_FWM)) {
imc_reg_init();
@@ -156,12 +156,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
/* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+ * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+ * So we remove it from AGESA code. Please See FchInitLateHwm.
*/
} else {
- /* HWM fan control, the way not recommand */
+ /* HWM fan control, the way not recommended */
FchParams->Imc.ImcEnable = FALSE;
FchParams->Hwm.HwMonitorEnable = TRUE;
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
diff --git a/src/mainboard/amd/thatcher/BiosCallOuts.c b/src/mainboard/amd/thatcher/BiosCallOuts.c
index f8b7539ed8..01dc5ab777 100644
--- a/src/mainboard/amd/thatcher/BiosCallOuts.c
+++ b/src/mainboard/amd/thatcher/BiosCallOuts.c
@@ -93,15 +93,15 @@ static const CODEC_TBL_LIST CodecTableList[] =
#define FREQ_14HZ 0xFE
#define FREQ_11HZ 0xFF
-/* Parmer Hardware Monitor Fan Control
+/* Hardware Monitor Fan Control
* Hardware limitation:
- * HWM failed to read the input temperture vi I2C,
- * if other software switch the I2C switch by mistake or intention.
- * We recommend to using IMC to control Fans, instead of HWM.
+ * HWM failed to read the input temperature via I2C,
+ * if other software switches the I2C switch by mistake or intention.
+ * We recommend using IMC to control Fans, instead of HWM.
*/
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
- /* Enable IMC fan control. the recommand way */
+ /* Enable IMC fan control, the recommended way */
if (CONFIG(HUDSON_IMC_FWM)) {
imc_reg_init();
@@ -156,12 +156,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
/* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+ * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+ * So we remove it from AGESA code. Please See FchInitLateHwm.
*/
} else {
- /* HWM fan control, the way not recommand */
+ /* HWM fan control, the way not recommended */
FchParams->Imc.ImcEnable = FALSE;
FchParams->Hwm.HwMonitorEnable = TRUE;
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
diff --git a/src/mainboard/bap/ode_e20XX/BiosCallOuts.c b/src/mainboard/bap/ode_e20XX/BiosCallOuts.c
index 9ebef559a5..27d1dcaa9a 100644
--- a/src/mainboard/bap/ode_e20XX/BiosCallOuts.c
+++ b/src/mainboard/bap/ode_e20XX/BiosCallOuts.c
@@ -97,15 +97,15 @@ static const CODEC_TBL_LIST CodecTableList[] =
#define FREQ_14HZ 0xFE
#define FREQ_11HZ 0xFF
-/* Hardware Monitor Fan Control
+/* Hardware Monitor Fan Control
* Hardware limitation:
- * HWM failed to read the input temperture vi I2C,
- * if other software switch the I2C switch by mistake or intention.
- * We recommend to using IMC to control Fans, instead of HWM.
+ * HWM failed to read the input temperature via I2C,
+ * if other software switches the I2C switch by mistake or intention.
+ * We recommend using IMC to control Fans, instead of HWM.
*/
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
- /* Enable IMC fan control. the recommand way */
+ /* Enable IMC fan control, the recommended way */
if (CONFIG(HUDSON_IMC_FWM)) {
imc_reg_init();
@@ -160,12 +160,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
/* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+ * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+ * So we remove it from AGESA code. Please See FchInitLateHwm.
*/
} else {
- /* HWM fan control, the way not recommand */
+ /* HWM fan control, the way not recommended */
FchParams->Imc.ImcEnable = FALSE;
FchParams->Hwm.HwMonitorEnable = TRUE;
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
diff --git a/src/mainboard/biostar/a68n_5200/BiosCallOuts.c b/src/mainboard/biostar/a68n_5200/BiosCallOuts.c
index 0caa71899d..fe4fab5a12 100644
--- a/src/mainboard/biostar/a68n_5200/BiosCallOuts.c
+++ b/src/mainboard/biostar/a68n_5200/BiosCallOuts.c
@@ -93,15 +93,15 @@ static const CODEC_TBL_LIST OlivehillCodecTableList[] =
#define FREQ_14HZ 0xFE
#define FREQ_11HZ 0xFF
-/* Olivehill Hardware Monitor Fan Control
+/* Hardware Monitor Fan Control
* Hardware limitation:
- * HWM failed to read the input temperture vi I2C,
- * if other software switch the I2C switch by mistake or intention.
- * We recommend to using IMC to control Fans, instead of HWM.
+ * HWM failed to read the input temperature via I2C,
+ * if other software switches the I2C switch by mistake or intention.
+ * We recommend using IMC to control Fans, instead of HWM.
*/
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
- /* Enable IMC fan control. the recommand way */
+ /* Enable IMC fan control, the recommended way */
if (CONFIG(HUDSON_IMC_FWM)) {
imc_reg_init();
@@ -156,12 +156,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
/* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+ * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+ * So we remove it from AGESA code. Please See FchInitLateHwm.
*/
} else {
- /* HWM fan control, the way not recommand */
+ /* HWM fan control, the way not recommended */
FchParams->Imc.ImcEnable = FALSE;
FchParams->Hwm.HwMonitorEnable = TRUE;
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
diff --git a/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c b/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
index a3fbb25c79..8fa8ab5bf3 100644
--- a/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
+++ b/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
@@ -93,15 +93,15 @@ static const CODEC_TBL_LIST CodecTableList[] =
#define FREQ_14HZ 0xFE
#define FREQ_11HZ 0xFF
-/* Hardware Monitor Fan Control
+/* Hardware Monitor Fan Control
* Hardware limitation:
- * HWM failed to read the input temperture vi I2C,
- * if other software switch the I2C switch by mistake or intention.
- * We recommend to using IMC to control Fans, instead of HWM.
+ * HWM failed to read the input temperature via I2C,
+ * if other software switches the I2C switch by mistake or intention.
+ * We recommend using IMC to control Fans, instead of HWM.
*/
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
- /* Enable IMC fan control. the recommand way */
+ /* Enable IMC fan control, the recommended way */
if (CONFIG(HUDSON_IMC_FWM)) {
imc_reg_init();
@@ -156,12 +156,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
/* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+ * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+ * So we remove it from AGESA code. Please See FchInitLateHwm.
*/
} else {
- /* HWM fan control, the way not recommand */
+ /* HWM fan control, the way not recommended */
FchParams->Imc.ImcEnable = FALSE;
FchParams->Hwm.HwMonitorEnable = TRUE;
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
diff --git a/src/mainboard/lenovo/g505s/BiosCallOuts.c b/src/mainboard/lenovo/g505s/BiosCallOuts.c
index 876b524a78..dfe53eaad9 100644
--- a/src/mainboard/lenovo/g505s/BiosCallOuts.c
+++ b/src/mainboard/lenovo/g505s/BiosCallOuts.c
@@ -92,15 +92,15 @@ static const CODEC_TBL_LIST CodecTableList[] =
#define FREQ_14HZ 0xFE
#define FREQ_11HZ 0xFF
-/* Parmer Hardware Monitor Fan Control
+/* Hardware Monitor Fan Control
* Hardware limitation:
- * HWM failed to read the input temperture vi I2C,
- * if other software switch the I2C switch by mistake or intention.
- * We recommend to using IMC to control Fans, instead of HWM.
+ * HWM failed to read the input temperature via I2C,
+ * if other software switches the I2C switch by mistake or intention.
+ * We recommend using IMC to control Fans, instead of HWM.
*/
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
- /* Enable IMC fan control. the recommend way */
+ /* Enable IMC fan control, the recommended way */
if (CONFIG(HUDSON_IMC_FWM)) {
imc_reg_init();
@@ -155,12 +155,12 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
/* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwrite it.
- * so we remove it from AGESA code. Please See FchInitLateHwm.
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+ * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
+ * So we remove it from AGESA code. Please See FchInitLateHwm.
*/
} else {
- /* HWM fan control, the way not recommend */
+ /* HWM fan control, the way not recommended */
FchParams->Imc.ImcEnable = FALSE;
FchParams->Hwm.HwMonitorEnable = TRUE;
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */