summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/mainboard/index.md4
-rw-r--r--Documentation/mainboard/supermicro/x10slm-f.md203
-rw-r--r--MAINTAINERS5
-rw-r--r--src/mainboard/supermicro/x10slm-f/Kconfig59
-rw-r--r--src/mainboard/supermicro/x10slm-f/Kconfig.name2
-rw-r--r--src/mainboard/supermicro/x10slm-f/Makefile.inc17
-rw-r--r--src/mainboard/supermicro/x10slm-f/acpi/ec.asl0
-rw-r--r--src/mainboard/supermicro/x10slm-f/acpi/platform.asl24
-rw-r--r--src/mainboard/supermicro/x10slm-f/acpi/superio.asl26
-rw-r--r--src/mainboard/supermicro/x10slm-f/acpi_tables.c21
-rw-r--r--src/mainboard/supermicro/x10slm-f/board_info.txt7
-rw-r--r--src/mainboard/supermicro/x10slm-f/cmos.default5
-rw-r--r--src/mainboard/supermicro/x10slm-f/cmos.layout97
-rw-r--r--src/mainboard/supermicro/x10slm-f/devicetree.cb133
-rw-r--r--src/mainboard/supermicro/x10slm-f/dsdt.asl33
-rw-r--r--src/mainboard/supermicro/x10slm-f/gpio.c215
-rw-r--r--src/mainboard/supermicro/x10slm-f/hda_verb.c23
-rw-r--r--src/mainboard/supermicro/x10slm-f/mainboard.c58
-rw-r--r--src/mainboard/supermicro/x10slm-f/romstage.c122
19 files changed, 1054 insertions, 0 deletions
diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md
index f97e178908..4e2b742045 100644
--- a/Documentation/mainboard/index.md
+++ b/Documentation/mainboard/index.md
@@ -66,3 +66,7 @@ The boards in this section are not real mainboards, but emulators.
## SiFive
- [SiFive HiFive Unleashed](sifive/hifive-unleashed.md)
+
+## Supermicro
+
+- [X10SLM+-F](supermicro/x10slm-f.md)
diff --git a/Documentation/mainboard/supermicro/x10slm-f.md b/Documentation/mainboard/supermicro/x10slm-f.md
new file mode 100644
index 0000000000..8d03429ab6
--- /dev/null
+++ b/Documentation/mainboard/supermicro/x10slm-f.md
@@ -0,0 +1,203 @@
+# Supermicro X10SLM+-F
+
+This section details how to run coreboot on the [Supermicro X10SLM+-F].
+
+## Required proprietary blobs
+
+```eval_rst
+Please see :doc:`../../northbridge/intel/haswell/mrc.bin`.
+```
+
+## Building coreboot
+
+```eval_rst
+If you haven't already, build the coreboot toolchain as described in
+:doc:`../../lessons/lesson1`.
+```
+
+A fully working image should be possible so long as you have the
+Haswell `mrc.bin` file. You can set the basic config with the following
+commands. However, it is strongly advised to use `make menuconfig`
+afterwards (or instead), so that you can see all of the settings.
+
+```bash
+make distclean # Note: this will remove your current config, if it exists.
+touch .config
+./util/scripts/config --enable VENDOR_SUPERMICRO
+./util/scripts/config --enable BOARD_SUPERMICRO_X10SLM_PLUS_F
+./util/scripts/config --enable HAVE_MRC
+make olddefconfig
+```
+
+If you don't plan on using coreboot's serial console to collect logs,
+you might want to disable it at this point (`./util/scripts/config
+--disable CONSOLE_SERIAL`). It should reduce the boot time by several
+seconds. However, a more flexible method is to change the console log
+level from within an OS using `util/nvramtool`, or with the `nvramcui`
+payload.
+
+Now, run `make` to build the coreboot image.
+
+## Flashing coreboot
+
+```eval_rst
+In addition to the information here, please see the
+:doc:`../../flash_tutorial/index`.
+```
+
+### Internal programming
+
+Under the vendor firmware, the BIOS region of the flash chip is
+write-protected. Additionally, the vendor flashing tool does not work
+with a coreboot image. So, [external programming](#external-programming)
+needs to be used when first installing coreboot. By default, coreboot is
+not configured to write-protect the BIOS region, so internal programming
+can be used thereafter.
+
+[flashrom] may be used to flash coreboot internally:
+
+```bash
+sudo flashrom -p internal --ifd -i bios --noverify-all -w coreboot.rom
+```
+
+The use of `--noverify-all` is required since the Management Engine
+region is not readable even by the host.
+
+### External programming
+
+The main firmware flash chip is an SOIC-8 package located near the CMOS
+battery and SATA ports. It should come with a sticker attached that
+states the firmware revision (e.g. "X10SLH 4.424"). The chip model is
+an N25Q128A, and the datasheet can be found [here][N25Q128A].
+
+As with [internal programming](#internal-programming), [flashrom] works
+reliably:
+
+```bash
+flashrom -p <your-programmer> --ifd -i bios -w coreboot.rom
+```
+
+For flashing to work, power to the board should be disconnected (ACPI
+G3), and power should be supplied from the external programmer. There is
+a diode attached to Vcc, so such flashing should not damage the board.
+During testing, a single X10SLM+-F has been flashed dozens of times this
+way without issue.
+
+## BMC (IPMI)
+
+This board has an ASPEED [AST2400], which has BMC functionality. The
+BMC firmware resides in a 32 MiB SOIC-16 chip just above the [AST2400].
+This chip is an MX25L25635F, whose datasheet can be found
+[here][MX25L25635F].
+
+### Removing the BMC functionality
+
+The BMC functionality on this board can be removed. If you do not need
+its features, removing the BMC functionality might increase security.
+This topic has not been widely explored, and you should only **undertake
+this process at your own risk.**
+
+There is a jumper labelled `JPB1` on the board that states the ability
+to disable the BMC. Though, pins 1 and 2 are fixed together, keeping
+the BMC enabled. It might be possible to disable the BMC by cutting the
+connection between pins 1 and 2 (and then connecting pins 2 and 3). This
+has not been tested so far.
+
+Another approach is to erase the entire BMC firmware chip. However, if
+this is done, and the board's power cycled, the voltage changes on some
+pins of the flash chip, **so it will be harder to flash it again!**
+
+To remove the firmware, connect an external programmer to the BMC
+firmware chip. Vcc should **not** be connected via the external
+programmer. The system should be turned off, but the power still
+connected (ACPI S5). Then, erase the chip with [flashrom]. Power cycle
+the board, and the BMC should no longer be active.
+
+If you erase the BMC firmware while using the **vendor BIOS**, you
+will need to cut the connection between pins 1 and 2 of `JPB1`. The
+system will stall for two minutes each time when booting, but it will
+eventually start. There is no such delay when running coreboot.
+
+## ECC DRAM
+
+```eval_rst
+ECC DRAM seems to work, but please see
+:doc:`../../northbridge/intel/haswell/mrc.bin`
+for caveats.
+```
+
+## Known issues
+
+- The x8 PCIe slots do not work, as the Haswell code is missing support.
+ The code to support it has been written, but it still needs to be
+ reviewed and merged.
+
+- Broadwell CPUs are not supported. They might work with minimal changes
+ to the code, but this has not been tested.
+
+- The PCH thermal sensor doesn't yet have a driver in coreboot, so it
+ can't be used for temperature readings.
+
+- There is no automatic, OS-independent fan control. This is because
+ the super I/O hardware monitor can only obtain valid CPU temperature
+ readings from the PECI agent, but the required driver doesn't exist
+ in coreboot. The `coretemp` driver can still be used for accurate CPU
+ temperature readings from an OS, and hence the OS can do fan control.
+
+## Untested
+
+- TPM
+- PCIe x4 slot (it will almost certainly work)
+- BMC (IPMI) functionality
+- internal serial port
+- chassis intrusion header
+- SATA DOM header
+- standby power header
+- serial GPIO headers
+- power supply SMBus header
+- jumpers not otherwise mentioned
+- LEDs
+
+## Working
+
+- USB
+- S3 suspend/resume
+- Gigabit Ethernet
+- SATA
+- external serial port
+- VGA graphics
+- disabling VGA graphics using the jumper
+- hiding the AST2400 using the CMOS setting
+- super I/O hardware monitor (see [Known issues](#known-issues))
+- initialisation with Haswell MRC version 1.6.1 build 2
+- flashrom under coreboot
+- Wake-on-LAN
+- front panel header
+- internal buzzer
+
+## Technology
+
+```eval_rst
++------------------+--------------------------------------------------+
+| CPU | :doc:`../../northbridge/intel/haswell/index` |
++------------------+--------------------------------------------------+
+| PCH | Intel Lynx Point (C224) |
++------------------+--------------------------------------------------+
+| Super I/O | Nuvoton NCT6776 |
++------------------+--------------------------------------------------+
+| Coprocessor | Intel SPS (server version of the ME) |
++------------------+--------------------------------------------------+
+| Coprocessor | ASPEED AST2400 |
++------------------+--------------------------------------------------+
+```
+
+## Extra links
+
+- [Board manual]
+
+[AST2400]: https://www.aspeedtech.com/products.php?fPath=20&rId=376
+[Board manual]: https://www.supermicro.com/manuals/motherboard/C224/MNL-1500.pdf
+[flashrom]: https://flashrom.org/Flashrom
+[MX25L25635F]: https://media.digikey.com/pdf/Data%20Sheets/Macronix/MX25L25635F.pdf
+[N25Q128A]: https://www.micron.com/~/media/Documents/Products/Data%20Sheet/NOR%20Flash/Serial%20NOR/N25Q/n25q_128mb_3v_65nm.pdf
+[Supermicro X10SLM+-F]: https://www.supermicro.com/products/motherboard/xeon/c220/x10slm_-f.cfm
diff --git a/MAINTAINERS b/MAINTAINERS
index f90315e34a..fdecc258be 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -378,6 +378,11 @@ F: src/mainboard/siemens/mc_apl1/
F: src/mainboard/siemens/mc_bdx1/
F: src/mainboard/siemens/mc_tcu3/
+SUPERMICRO X10SLM+-F MAINBOARD
+M: Tristan Corrick <tristan@corrick.kiwi>
+S: Maintained
+F: src/mainboard/supermicro/x10slm-f/
+
AMD FAMILY10H & FAMILY15H (NON-AGESA) CPUS & NORTHBRIDGE
M: Timothy Pearson <tpearson@raptorengineeringinc.com>
S: Supported
diff --git a/src/mainboard/supermicro/x10slm-f/Kconfig b/src/mainboard/supermicro/x10slm-f/Kconfig
new file mode 100644
index 0000000000..6bf0b2a199
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/Kconfig
@@ -0,0 +1,59 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
+##
+## This program is free software: you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation, either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+if BOARD_SUPERMICRO_X10SLM_PLUS_F
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+ select BOARD_ROMSIZE_KB_16384
+ select CPU_INTEL_HASWELL
+ select DRIVERS_ASPEED_AST2050 # Supports AST2400 too.
+ select HAVE_ACPI_RESUME
+ select HAVE_ACPI_TABLES
+ select HAVE_OPTION_TABLE
+ select HAVE_CMOS_DEFAULT
+ select NORTHBRIDGE_INTEL_HASWELL
+ select SERIRQ_CONTINUOUS_MODE
+ select SOUTHBRIDGE_INTEL_LYNXPOINT
+ select SUPERIO_NUVOTON_NCT6776
+ select SUPERIO_NUVOTON_NCT6776_COM_A
+ select TSC_MONOTONIC_TIMER
+
+config CBFS_SIZE
+ hex
+ default 0xb00000
+
+config MAINBOARD_DIR
+ string
+ default "supermicro/x10slm-f"
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "X10SLM+-F"
+
+config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+ hex
+ default 0x0803
+
+config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+ hex
+ default 0x15d9
+
+config MAX_CPUS
+ int
+ default 8
+
+endif
diff --git a/src/mainboard/supermicro/x10slm-f/Kconfig.name b/src/mainboard/supermicro/x10slm-f/Kconfig.name
new file mode 100644
index 0000000000..a1965a38fe
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_SUPERMICRO_X10SLM_PLUS_F
+ bool "X10SLM+-F"
diff --git a/src/mainboard/supermicro/x10slm-f/Makefile.inc b/src/mainboard/supermicro/x10slm-f/Makefile.inc
new file mode 100644
index 0000000000..ea9cc8ab88
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/Makefile.inc
@@ -0,0 +1,17 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
+##
+## This program is free software: you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation, either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+romstage-y += gpio.c
diff --git a/src/mainboard/supermicro/x10slm-f/acpi/ec.asl b/src/mainboard/supermicro/x10slm-f/acpi/ec.asl
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/acpi/ec.asl
diff --git a/src/mainboard/supermicro/x10slm-f/acpi/platform.asl b/src/mainboard/supermicro/x10slm-f/acpi/platform.asl
new file mode 100644
index 0000000000..adaf51a5ec
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/acpi/platform.asl
@@ -0,0 +1,24 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Tristan Corrick <tristan@corrick.kiwi>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+Method(_WAK, 1)
+{
+ Return (Package() { 0, 0 })
+}
+
+Method(_PTS, 1)
+{
+}
diff --git a/src/mainboard/supermicro/x10slm-f/acpi/superio.asl b/src/mainboard/supermicro/x10slm-f/acpi/superio.asl
new file mode 100644
index 0000000000..b12aabd04c
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/acpi/superio.asl
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define SUPERIO_DEV SIO0
+#define SUPERIO_PNP_BASE 0x2e
+#define NCT6776_SHOW_SP1
+#define NCT6776_SHOW_HWM
+
+#undef NCT6776_SHOW_KBC
+#undef NCT6776_SHOW_PP
+#undef NCT6776_SHOW_GPIO
+
+#include <superio/nuvoton/nct6776/acpi/superio.asl>
diff --git a/src/mainboard/supermicro/x10slm-f/acpi_tables.c b/src/mainboard/supermicro/x10slm-f/acpi_tables.c
new file mode 100644
index 0000000000..a43b499017
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/acpi_tables.c
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <southbridge/intel/lynxpoint/nvs.h>
+
+void acpi_create_gnvs(global_nvs_t *gnvs)
+{
+}
diff --git a/src/mainboard/supermicro/x10slm-f/board_info.txt b/src/mainboard/supermicro/x10slm-f/board_info.txt
new file mode 100644
index 0000000000..e5584297cf
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/board_info.txt
@@ -0,0 +1,7 @@
+Category: server
+Board URL: https://www.supermicro.com/products/motherboard/xeon/c220/x10slm_-f.cfm
+ROM package: SOIC-8
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
+Release year: 2013
diff --git a/src/mainboard/supermicro/x10slm-f/cmos.default b/src/mainboard/supermicro/x10slm-f/cmos.default
new file mode 100644
index 0000000000..f4047147f7
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/cmos.default
@@ -0,0 +1,5 @@
+boot_option=Fallback
+debug_level=Debug
+nmi=Enable
+power_on_after_fail=Keep
+hide_ast2400=Disable
diff --git a/src/mainboard/supermicro/x10slm-f/cmos.layout b/src/mainboard/supermicro/x10slm-f/cmos.layout
new file mode 100644
index 0000000000..cce1f1844e
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/cmos.layout
@@ -0,0 +1,97 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+## Copyright (C) 2014 Vladimir Serbinenko
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+# -----------------------------------------------------------------
+entries
+
+# -----------------------------------------------------------------
+# Status Register A
+# -----------------------------------------------------------------
+# Status Register B
+# -----------------------------------------------------------------
+# Status Register C
+#96 4 r 0 status_c_rsvd
+#100 1 r 0 uf_flag
+#101 1 r 0 af_flag
+#102 1 r 0 pf_flag
+#103 1 r 0 irqf_flag
+# -----------------------------------------------------------------
+# Status Register D
+#104 7 r 0 status_d_rsvd
+#111 1 r 0 valid_cmos_ram
+# -----------------------------------------------------------------
+# Diagnostic Status Register
+#112 8 r 0 diag_rsvd1
+
+# -----------------------------------------------------------------
+0 120 r 0 reserved_memory
+#120 264 r 0 unused
+
+# -----------------------------------------------------------------
+# RTC_BOOT_BYTE (coreboot hardcoded)
+384 1 e 3 boot_option
+388 4 h 0 reboot_counter
+
+# -----------------------------------------------------------------
+# coreboot config options: console
+#392 3 r 0 unused
+395 4 e 4 debug_level
+#399 1 r 0 unused
+
+#400 8 r 0 reserved for century byte
+
+# coreboot config options: southbridge
+408 1 e 1 nmi
+409 2 e 5 power_on_after_fail
+
+# coreboot config options: mainboard
+416 1 e 1 hide_ast2400
+
+# coreboot config options: check sums
+984 16 h 0 check_sum
+
+# -----------------------------------------------------------------
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+
+2 0 Enable
+2 1 Disable
+
+3 0 Fallback
+3 1 Normal
+
+4 0 Emergency
+4 1 Alert
+4 2 Critical
+4 3 Error
+4 4 Warning
+4 5 Notice
+4 6 Info
+4 7 Debug
+4 8 Spew
+
+5 0 Disable
+5 1 Enable
+5 2 Keep
+
+# -----------------------------------------------------------------
+checksums
+
+checksum 392 423 984
diff --git a/src/mainboard/supermicro/x10slm-f/devicetree.cb b/src/mainboard/supermicro/x10slm-f/devicetree.cb
new file mode 100644
index 0000000000..434fb59f49
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/devicetree.cb
@@ -0,0 +1,133 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
+##
+## This program is free software: you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation, either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+chip northbridge/intel/haswell
+
+ device cpu_cluster 0 on
+ chip cpu/intel/haswell
+ register "c1_acpower" = "1"
+ register "c1_battery" = "1"
+ register "c2_acpower" = "3"
+ register "c2_battery" = "3"
+ register "c3_acpower" = "5"
+ register "c3_battery" = "5"
+
+ device lapic 0 on end
+ device lapic 0xacac off end
+ end
+ end
+
+ device domain 0 on
+ subsystemid 0x15d9 0x0803 inherit
+
+ device pci 00.0 on end # Host bridge
+ device pci 01.0 on end # PEG 10
+ device pci 01.1 on end # PEG 11
+ device pci 02.0 off end # IGD
+ device pci 03.0 off end # Mini-HD audio
+
+ chip southbridge/intel/lynxpoint
+ register "pirqa_routing" = "0x8b"
+ register "pirqb_routing" = "0x8a"
+ register "pirqc_routing" = "0x8b"
+ register "pirqd_routing" = "0x8a"
+ register "pirqe_routing" = "0x80"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x80"
+ register "pirqh_routing" = "0x85"
+
+ register "sata_ahci" = "1"
+ register "sata_port_map" = "0x3f"
+
+ register "gen1_dec" = "0x00000295" # Super I/O HWM
+
+ device pci 14.0 on end # xHCI controller
+ device pci 16.0 on end # Management Engine interface 1
+ device pci 16.1 on end # Management Engine interface 2
+ device pci 16.2 off end # Management Engine IDE-R
+ device pci 16.3 off end # Management Engine KT
+ device pci 19.0 off end # Intel Gigabit Ethernet
+ device pci 1a.0 on end # EHCI controller 2
+ device pci 1b.0 off end # HD audio controller
+ device pci 1c.0 on # PCIe root port 1
+ device pci 00.0 on # ASPEED PCI-to-PCI bridge
+ device pci 00.0 on end # VGA controller
+ end
+ end
+ device pci 1c.1 off end # PCIe root port 2
+ device pci 1c.2 on # PCIe root port 3
+ device pci 00.0 on # Intel I210 Gigabit Ethernet
+ subsystemid 0x15d9 0x1533
+ end
+ end
+ device pci 1c.3 on # PCIe root port 4
+ device pci 00.0 on # Intel I210 Gigabit Ethernet
+ subsystemid 0x15d9 0x1533
+ end
+ end
+ device pci 1c.4 on end # PCIe root port 5
+ device pci 1c.5 off end # PCIe root port 6
+ device pci 1c.6 off end # PCIe root port 7
+ device pci 1c.7 off end # PCIe root port 8
+ device pci 1d.0 on end # EHCI controller 1
+ device pci 1f.0 on # LPC bridge
+ chip superio/nuvoton/nct6776
+ device pnp 2e.0 off end # Floppy
+ device pnp 2e.1 off end # Parallel
+ device pnp 2e.2 on # UART A
+ io 0x60 = 0x03f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on # UART B
+ io 0x60 = 0x02f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 off end # PS/2 KBC
+ device pnp 2e.6 off end # CIR
+ device pnp 2e.7 off end # GPIO8
+ device pnp 2e.107 off end # GPIO9
+ device pnp 2e.8 off end # WDT
+ device pnp 2e.108 off end # GPIO0
+ device pnp 2e.208 off end # GPIOA
+ device pnp 2e.308 off end # GPIO base
+ device pnp 2e.109 off end # GPIO1
+ device pnp 2e.209 off end # GPIO2
+ device pnp 2e.309 off end # GPIO3
+ device pnp 2e.409 off end # GPIO4
+ device pnp 2e.509 off end # GPIO5
+ device pnp 2e.609 off end # GPIO6
+ device pnp 2e.709 off end # GPIO7
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b on # HWM, LED
+ io 0x60 = 0x0290
+ io 0x62 = 0
+ irq 0x70 = 0
+ end
+ device pnp 2e.d off end # VID
+ device pnp 2e.e off end # CIR wake-up
+ device pnp 2e.f off end # GPIO PP/OD
+ device pnp 2e.14 off end # SVID
+ device pnp 2e.16 off end # Deep sleep
+ device pnp 2e.17 off end # GPIOA
+ end
+ end
+ device pci 1f.2 on end # SATA controller 1
+ device pci 1f.3 on end # SMBus
+ device pci 1f.5 off end # SATA controller 2
+ device pci 1f.6 on end # PCH thermal sensor
+ end
+ end
+end
diff --git a/src/mainboard/supermicro/x10slm-f/dsdt.asl b/src/mainboard/supermicro/x10slm-f/dsdt.asl
new file mode 100644
index 0000000000..3a587b65e3
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/dsdt.asl
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/acpi.h>
+
+DefinitionBlock("dsdt.aml", "DSDT", 2, OEM_ID, ACPI_TABLE_CREATOR, 0x20181220)
+{
+ #include "acpi/platform.asl"
+ #include <southbridge/intel/lynxpoint/acpi/platform.asl>
+ #include <southbridge/intel/lynxpoint/acpi/globalnvs.asl>
+ #include <southbridge/intel/lynxpoint/acpi/sleepstates.asl>
+ #include <cpu/intel/common/acpi/cpu.asl>
+
+ Device (\_SB.PCI0)
+ {
+ #include <northbridge/intel/haswell/acpi/haswell.asl>
+ #include <southbridge/intel/lynxpoint/acpi/pch.asl>
+ #include <drivers/intel/gma/acpi/default_brightness_levels.asl>
+ }
+}
diff --git a/src/mainboard/supermicro/x10slm-f/gpio.c b/src/mainboard/supermicro/x10slm-f/gpio.c
new file mode 100644
index 0000000000..a1668f1d1d
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/gpio.c
@@ -0,0 +1,215 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <southbridge/intel/common/gpio.h>
+
+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
+ .gpio0 = GPIO_MODE_GPIO,
+ .gpio1 = GPIO_MODE_GPIO,
+ .gpio2 = GPIO_MODE_GPIO,
+ .gpio3 = GPIO_MODE_GPIO,
+ .gpio4 = GPIO_MODE_GPIO,
+ .gpio5 = GPIO_MODE_GPIO,
+ .gpio6 = GPIO_MODE_GPIO,
+ .gpio7 = GPIO_MODE_GPIO,
+ .gpio8 = GPIO_MODE_GPIO,
+ .gpio9 = GPIO_MODE_GPIO,
+ .gpio10 = GPIO_MODE_GPIO,
+ .gpio13 = GPIO_MODE_GPIO,
+ .gpio14 = GPIO_MODE_GPIO,
+ .gpio15 = GPIO_MODE_GPIO,
+ .gpio16 = GPIO_MODE_GPIO,
+ .gpio17 = GPIO_MODE_GPIO,
+ .gpio19 = GPIO_MODE_GPIO,
+ .gpio20 = GPIO_MODE_GPIO,
+ .gpio21 = GPIO_MODE_GPIO,
+ .gpio24 = GPIO_MODE_GPIO,
+ .gpio25 = GPIO_MODE_GPIO,
+ .gpio26 = GPIO_MODE_GPIO,
+ .gpio27 = GPIO_MODE_GPIO,
+ .gpio28 = GPIO_MODE_GPIO,
+ .gpio29 = GPIO_MODE_GPIO,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
+ .gpio0 = GPIO_DIR_OUTPUT,
+ .gpio1 = GPIO_DIR_OUTPUT,
+ .gpio2 = GPIO_DIR_OUTPUT,
+ .gpio3 = GPIO_DIR_INPUT,
+ .gpio4 = GPIO_DIR_INPUT,
+ .gpio5 = GPIO_DIR_INPUT,
+ .gpio6 = GPIO_DIR_OUTPUT,
+ .gpio7 = GPIO_DIR_OUTPUT,
+ .gpio8 = GPIO_DIR_OUTPUT,
+ .gpio9 = GPIO_DIR_INPUT,
+ .gpio10 = GPIO_DIR_INPUT,
+ .gpio13 = GPIO_DIR_INPUT,
+ .gpio14 = GPIO_DIR_INPUT,
+ .gpio15 = GPIO_DIR_INPUT,
+ .gpio16 = GPIO_DIR_OUTPUT,
+ .gpio17 = GPIO_DIR_INPUT,
+ .gpio19 = GPIO_DIR_OUTPUT,
+ .gpio20 = GPIO_DIR_OUTPUT,
+ .gpio21 = GPIO_DIR_INPUT,
+ .gpio24 = GPIO_DIR_OUTPUT,
+ .gpio25 = GPIO_DIR_INPUT,
+ .gpio26 = GPIO_DIR_INPUT,
+ .gpio27 = GPIO_DIR_OUTPUT,
+ .gpio28 = GPIO_DIR_OUTPUT,
+ .gpio29 = GPIO_DIR_INPUT,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_level = {
+ .gpio0 = GPIO_LEVEL_HIGH,
+ .gpio1 = GPIO_LEVEL_HIGH,
+ .gpio2 = GPIO_LEVEL_HIGH,
+ .gpio6 = GPIO_LEVEL_HIGH,
+ .gpio7 = GPIO_LEVEL_HIGH,
+ .gpio8 = GPIO_LEVEL_HIGH,
+ .gpio16 = GPIO_LEVEL_HIGH,
+ .gpio19 = GPIO_LEVEL_HIGH,
+ .gpio20 = GPIO_LEVEL_HIGH,
+ .gpio24 = GPIO_LEVEL_HIGH,
+ .gpio27 = GPIO_LEVEL_HIGH,
+ .gpio28 = GPIO_LEVEL_HIGH,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
+ .gpio3 = GPIO_INVERT,
+ .gpio14 = GPIO_INVERT,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
+ .gpio32 = GPIO_MODE_GPIO,
+ .gpio33 = GPIO_MODE_GPIO,
+ .gpio34 = GPIO_MODE_GPIO,
+ .gpio36 = GPIO_MODE_GPIO,
+ .gpio37 = GPIO_MODE_GPIO,
+ .gpio40 = GPIO_MODE_GPIO,
+ .gpio41 = GPIO_MODE_GPIO,
+ .gpio42 = GPIO_MODE_GPIO,
+ .gpio43 = GPIO_MODE_GPIO,
+ .gpio44 = GPIO_MODE_GPIO,
+ .gpio45 = GPIO_MODE_GPIO,
+ .gpio46 = GPIO_MODE_GPIO,
+ .gpio47 = GPIO_MODE_GPIO,
+ .gpio49 = GPIO_MODE_GPIO,
+ .gpio50 = GPIO_MODE_GPIO,
+ .gpio51 = GPIO_MODE_GPIO,
+ .gpio52 = GPIO_MODE_GPIO,
+ .gpio53 = GPIO_MODE_GPIO,
+ .gpio54 = GPIO_MODE_GPIO,
+ .gpio55 = GPIO_MODE_GPIO,
+ .gpio59 = GPIO_MODE_GPIO,
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
+ .gpio32 = GPIO_DIR_INPUT,
+ .gpio33 = GPIO_DIR_OUTPUT,
+ .gpio34 = GPIO_DIR_INPUT,
+ .gpio36 = GPIO_DIR_OUTPUT,
+ .gpio37 = GPIO_DIR_OUTPUT,
+ .gpio40 = GPIO_DIR_INPUT,
+ .gpio41 = GPIO_DIR_INPUT,
+ .gpio42 = GPIO_DIR_INPUT,
+ .gpio43 = GPIO_DIR_INPUT,
+ .gpio44 = GPIO_DIR_INPUT,
+ .gpio45 = GPIO_DIR_INPUT,
+ .gpio46 = GPIO_DIR_INPUT,
+ .gpio47 = GPIO_DIR_OUTPUT,
+ .gpio49 = GPIO_DIR_INPUT,
+ .gpio50 = GPIO_DIR_INPUT,
+ .gpio51 = GPIO_DIR_OUTPUT,
+ .gpio52 = GPIO_DIR_INPUT,
+ .gpio53 = GPIO_DIR_OUTPUT,
+ .gpio54 = GPIO_DIR_OUTPUT,
+ .gpio55 = GPIO_DIR_INPUT,
+ .gpio59 = GPIO_DIR_INPUT,
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_level = {
+ .gpio33 = GPIO_LEVEL_HIGH,
+ .gpio36 = GPIO_LEVEL_HIGH,
+ .gpio37 = GPIO_LEVEL_HIGH,
+ .gpio47 = GPIO_LEVEL_LOW,
+ .gpio51 = GPIO_LEVEL_HIGH,
+ .gpio53 = GPIO_LEVEL_HIGH,
+ .gpio54 = GPIO_LEVEL_HIGH,
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
+ .gpio64 = GPIO_MODE_GPIO,
+ .gpio65 = GPIO_MODE_GPIO,
+ .gpio66 = GPIO_MODE_GPIO,
+ .gpio68 = GPIO_MODE_GPIO,
+ .gpio69 = GPIO_MODE_GPIO,
+ .gpio70 = GPIO_MODE_GPIO,
+ .gpio71 = GPIO_MODE_GPIO,
+ .gpio72 = GPIO_MODE_GPIO,
+ .gpio73 = GPIO_MODE_GPIO,
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
+ .gpio64 = GPIO_DIR_INPUT,
+ .gpio65 = GPIO_DIR_INPUT,
+ .gpio66 = GPIO_DIR_INPUT,
+ .gpio68 = GPIO_DIR_INPUT,
+ .gpio69 = GPIO_DIR_INPUT,
+ .gpio70 = GPIO_DIR_INPUT,
+ .gpio71 = GPIO_DIR_INPUT,
+ .gpio72 = GPIO_DIR_OUTPUT,
+ .gpio73 = GPIO_DIR_OUTPUT,
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_level = {
+ .gpio72 = GPIO_LEVEL_HIGH,
+ .gpio73 = GPIO_LEVEL_LOW,
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
+};
+
+const struct pch_gpio_map mainboard_gpio_map = {
+ .set1 = {
+ .mode = &pch_gpio_set1_mode,
+ .direction = &pch_gpio_set1_direction,
+ .level = &pch_gpio_set1_level,
+ .blink = &pch_gpio_set1_blink,
+ .invert = &pch_gpio_set1_invert,
+ .reset = &pch_gpio_set1_reset,
+ },
+ .set2 = {
+ .mode = &pch_gpio_set2_mode,
+ .direction = &pch_gpio_set2_direction,
+ .level = &pch_gpio_set2_level,
+ .reset = &pch_gpio_set2_reset,
+ },
+ .set3 = {
+ .mode = &pch_gpio_set3_mode,
+ .direction = &pch_gpio_set3_direction,
+ .level = &pch_gpio_set3_level,
+ .reset = &pch_gpio_set3_reset,
+ },
+};
diff --git a/src/mainboard/supermicro/x10slm-f/hda_verb.c b/src/mainboard/supermicro/x10slm-f/hda_verb.c
new file mode 100644
index 0000000000..0944532636
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/hda_verb.c
@@ -0,0 +1,23 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {};
+const u32 pc_beep_verbs[] = {};
+
+AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/supermicro/x10slm-f/mainboard.c b/src/mainboard/supermicro/x10slm-f/mainboard.c
new file mode 100644
index 0000000000..8d0e3b0281
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/mainboard.c
@@ -0,0 +1,58 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci_def.h>
+#include <option.h>
+#include <stdint.h>
+#include <types.h>
+
+/*
+ * Hiding the AST2400 might be desirable to reduce attack surface.
+ *
+ * The PCIe root port that the AST2400 is on is disabled, but the
+ * AST2400 itself likely remains in an enabled state.
+ *
+ * The AST2400 is also attached to the LPC. That interface does not get
+ * disabled.
+ */
+static void hide_ast2400(void)
+{
+ struct device *dev = dev_find_slot(0, PCI_DEVFN(0x1c, 0));
+ if (!dev)
+ return;
+
+ /*
+ * Marking this device as disabled means that the southbridge code
+ * will properly disable the root port when it configures it later.
+ */
+ dev->enabled = 0;
+ printk(BIOS_INFO, "The AST2400 is now set to be hidden.\n");
+}
+
+static void mainboard_enable(struct device *dev)
+{
+ u8 hide = 0;
+
+ if (get_option(&hide, "hide_ast2400") == CB_SUCCESS && hide)
+ hide_ast2400();
+}
+
+struct chip_operations mainboard_ops = {
+ CHIP_NAME("X10SLM+-F")
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/supermicro/x10slm-f/romstage.c b/src/mainboard/supermicro/x10slm-f/romstage.c
new file mode 100644
index 0000000000..cf71b40a20
--- /dev/null
+++ b/src/mainboard/supermicro/x10slm-f/romstage.c
@@ -0,0 +1,122 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2012 Google Inc.
+ * Copyright (C) 2018 Tristan Corrick <tristan@corrick.kiwi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <cpu/intel/haswell/haswell.h>
+#include <cpu/intel/romstage.h>
+#include <northbridge/intel/haswell/haswell.h>
+#include <northbridge/intel/haswell/pei_data.h>
+#include <southbridge/intel/common/gpio.h>
+#include <southbridge/intel/lynxpoint/pch.h>
+#include <stdint.h>
+#include <superio/nuvoton/common/nuvoton.h>
+#include <superio/nuvoton/nct6776/nct6776.h>
+
+static const struct rcba_config_instruction rcba_config[] = {
+ RCBA_SET_REG_16(D31IR, DIR_ROUTE(PIRQA, PIRQD, PIRQC, PIRQA)),
+ RCBA_SET_REG_16(D29IR, DIR_ROUTE(PIRQH, PIRQD, PIRQA, PIRQC)),
+ RCBA_SET_REG_16(D28IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),
+ RCBA_SET_REG_16(D27IR, DIR_ROUTE(PIRQG, PIRQB, PIRQC, PIRQD)),
+ RCBA_SET_REG_16(D26IR, DIR_ROUTE(PIRQA, PIRQF, PIRQC, PIRQD)),
+ RCBA_SET_REG_16(D25IR, DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH)),
+ RCBA_SET_REG_16(D22IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),
+ RCBA_SET_REG_16(D20IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),
+
+ RCBA_RMW_REG_32(FD, ~0UL, PCH_DISABLE_ALWAYS),
+
+ RCBA_END_CONFIG,
+};
+
+void mainboard_config_superio(void)
+{
+ const pnp_devfn_t GLOBAL_PSEUDO_DEV = PNP_DEV(0x2e, 0);
+ const pnp_devfn_t SERIAL_DEV = PNP_DEV(0x2e, NCT6776_SP1);
+ const pnp_devfn_t ACPI_DEV = PNP_DEV(0x2e, NCT6776_ACPI);
+
+ nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+
+ nuvoton_pnp_enter_conf_state(GLOBAL_PSEUDO_DEV);
+
+ /* Select HWM/LED functions instead of floppy functions. */
+ pnp_write_config(GLOBAL_PSEUDO_DEV, 0x1c, 0x03);
+ pnp_write_config(GLOBAL_PSEUDO_DEV, 0x24, 0x24);
+
+ /* Power RAM in S3 and let the PCH handle power failure actions. */
+ pnp_set_logical_device(ACPI_DEV);
+ pnp_write_config(ACPI_DEV, 0xe4, 0x70);
+
+ nuvoton_pnp_exit_conf_state(GLOBAL_PSEUDO_DEV);
+}
+
+void mainboard_romstage_entry(unsigned long bist)
+{
+ struct pei_data pei_data = {
+ .pei_version = PEI_VERSION,
+ .mchbar = (uintptr_t)DEFAULT_MCHBAR,
+ .dmibar = (uintptr_t)DEFAULT_DMIBAR,
+ .epbar = DEFAULT_EPBAR,
+ .pciexbar = DEFAULT_PCIEXBAR,
+ .smbusbar = SMBUS_IO_BASE,
+ .wdbbar = 0x4000000,
+ .wdbsize = 0x1000,
+ .hpet_address = HPET_ADDR,
+ .rcba = (uintptr_t)DEFAULT_RCBA,
+ .pmbase = DEFAULT_PMBASE,
+ .gpiobase = DEFAULT_GPIOBASE,
+ .temp_mmio_base = 0xfed08000,
+ .system_type = 1, /* desktop/server */
+ .tseg_size = CONFIG_SMM_TSEG_SIZE,
+ .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 },
+ .ec_present = 0,
+ .ddr_refresh_2x = 1,
+ .max_ddr3_freq = 1600,
+ .usb2_ports = {
+ /* Length, Enable, OCn#, Location */
+ { 0x0040, 1, 0, USB_PORT_INTERNAL },
+ { 0x0040, 1, 0, USB_PORT_BACK_PANEL },
+ { 0x0110, 1, 1, USB_PORT_BACK_PANEL },
+ { 0x0110, 1, 1, USB_PORT_BACK_PANEL },
+ { 0x0110, 1, 2, USB_PORT_BACK_PANEL },
+ { 0x0110, 1, 2, USB_PORT_BACK_PANEL },
+ { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
+ { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
+ { 0x0040, 1, 4, USB_PORT_BACK_PANEL },
+ { 0x0040, 1, 4, USB_PORT_BACK_PANEL },
+ { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
+ { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
+ { 0x0040, 1, 6, USB_PORT_BACK_PANEL },
+ { 0x0040, 1, 6, USB_PORT_BACK_PANEL },
+ },
+ .usb3_ports = {
+ /* Enable, OCn# */
+ { 1, 1 },
+ { 1, 1 },
+ { 0, USB_OC_PIN_SKIP },
+ { 0, USB_OC_PIN_SKIP },
+ { 1, 3 },
+ { 1, 3 },
+ },
+ };
+
+ struct romstage_params romstage_params = {
+ .pei_data = &pei_data,
+ .gpio_map = &mainboard_gpio_map,
+ .rcba_config = rcba_config,
+ .bist = bist,
+ };
+
+ romstage_common(&romstage_params);
+}