summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/cpu/intel/model_6ex/Config.lb1
-rw-r--r--src/cpu/intel/model_6ex/model_6ex_init.c51
-rw-r--r--src/cpu/intel/model_6fx/model_6fx_init.c22
-rw-r--r--src/cpu/intel/speedstep/Config.lb1
-rw-r--r--src/cpu/intel/speedstep/acpi.c137
-rw-r--r--src/cpu/x86/smm/smmrelocate.S8
6 files changed, 202 insertions, 18 deletions
diff --git a/src/cpu/intel/model_6ex/Config.lb b/src/cpu/intel/model_6ex/Config.lb
index 79ff9b1eec..5aef8ff955 100644
--- a/src/cpu/intel/model_6ex/Config.lb
+++ b/src/cpu/intel/model_6ex/Config.lb
@@ -11,4 +11,5 @@ dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
dir /cpu/intel/hyperthreading
+dir /cpu/intel/speedstep
driver model_6ex_init.o
diff --git a/src/cpu/intel/model_6ex/model_6ex_init.c b/src/cpu/intel/model_6ex/model_6ex_init.c
index 3a5b59a541..d056bda733 100644
--- a/src/cpu/intel/model_6ex/model_6ex_init.c
+++ b/src/cpu/intel/model_6ex/model_6ex_init.c
@@ -111,30 +111,41 @@ static void enable_vmx(void)
#define PMG_CST_CONFIG_CONTROL 0xe2
#define PMG_IO_BASE_ADDR 0xe3
#define PMG_IO_CAPTURE_ADDR 0xe4
-#define PMB0 0x510 /* analogous to P_BLK in cpu.asl */
-#define PMB1 0x0 /* IO port that triggers SMI once cores are in the same state.
- See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4] */
+
+/* MWAIT coordination I/O base address. This must match
+ * the \_PR_.CPU0 PM base address.
+ */
+#define PMB0_BASE 0x510
+
+/* PMB1: I/O port that triggers SMI once cores are in the same state.
+ * See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4]
+ */
+#define PMB1_BASE 0x800
#define HIGHEST_CLEVEL 3
static void configure_c_states(void)
{
msr_t msr;
msr = rdmsr(PMG_CST_CONFIG_CONTROL);
- msr.lo |= (1 << 15); // Lock configuration
- msr.lo |= (1 << 10); // redirect IO-based CState transition requests to MWAIT
+ msr.lo |= (1 << 15); // config lock until next reset.
+ msr.lo |= (1 << 10); // Enable I/O MWAIT redirection for C-States
msr.lo &= ~(1 << 9); // Issue a single stop grant cycle upon stpclk
- msr.lo &= ~7; msr.lo |= HIGHEST_CLEVEL; // support at most C3
// TODO Do we want Deep C4 and Dynamic L2 shrinking?
+
+ /* Number of supported C-States */
+ msr.lo &= ~7;
+ msr.lo |= HIGHEST_CLEVEL; // support at most C3
+
wrmsr(PMG_CST_CONFIG_CONTROL, msr);
- // set P_BLK address
- msr = rdmsr(PMG_IO_BASE_ADDR);
- msr.lo = PMB0+4 | (PMB1<<16);
+ /* Set Processor MWAIT IO BASE (P_BLK) */
+ msr.hi = 0;
+ msr.lo = ((PMB0_BASE + 4) & 0xffff) | (((PMB1_BASE + 9) & 0xffff) << 16);
wrmsr(PMG_IO_BASE_ADDR, msr);
- // set C_LVL controls
- msr = rdmsr(PMG_IO_CAPTURE_ADDR);
- msr.lo = PMB0+4 | (HIGHEST_CLEVEL-2)<<16; // -2 because LVL0+1 aren't counted
+ /* set C_LVL controls */
+ msr.hi = 0;
+ msr.lo = (PMB0_BASE + 4) | ((HIGHEST_CLEVEL - 2) << 16); // -2 because LVL0+1 aren't counted
wrmsr(PMG_IO_CAPTURE_ADDR, msr);
}
@@ -160,6 +171,19 @@ static void configure_misc(void)
wrmsr(IA32_MISC_ENABLE, msr);
}
+#define PIC_SENS_CFG 0x1aa
+static void configure_pic_thermal_sensors(void)
+{
+ msr_t msr;
+
+ msr = rdmsr(PIC_SENS_CFG);
+
+ msr.lo |= (1 << 21); // inter-core lock TM1
+ msr.lo |= (1 << 4); // Enable bypass filter
+
+ wrmsr(PIC_SENS_CFG, msr);
+}
+
#if CONFIG_USBDEBUG_DIRECT
static unsigned ehci_debug_addr;
#endif
@@ -205,7 +229,8 @@ static void model_6ex_init(device_t cpu)
/* Configure Enhanced SpeedStep and Thermal Sensors */
configure_misc();
- /* TODO: PIC thermal sensor control */
+ /* PIC thermal sensor control */
+ configure_pic_thermal_sensors();
/* Start up my cpu siblings */
intel_sibling_init(cpu);
diff --git a/src/cpu/intel/model_6fx/model_6fx_init.c b/src/cpu/intel/model_6fx/model_6fx_init.c
index d716efbd48..37eb81fabf 100644
--- a/src/cpu/intel/model_6fx/model_6fx_init.c
+++ b/src/cpu/intel/model_6fx/model_6fx_init.c
@@ -126,9 +126,16 @@ static void enable_vmx(void)
#define PMG_IO_BASE_ADDR 0xe3
#define PMG_IO_CAPTURE_ADDR 0xe4
-#define PMB0_BASE 0x580
+/* MWAIT coordination I/O base address. This must match
+ * the \_PR_.CPU0 PM base address.
+ */
+#define PMB0_BASE 0x510
+
+/* PMB1: I/O port that triggers SMI once cores are in the same state.
+ * See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4]
+ */
#define PMB1_BASE 0x800
-#define CST_RANGE 2
+#define HIGHEST_CLEVEL 3
static void configure_c_states(void)
{
msr_t msr;
@@ -141,6 +148,10 @@ static void configure_c_states(void)
msr.lo &= ~(1 << 9); // Issue a single stop grant cycle upon stpclk
msr.lo |= (1 << 3); // Dynamic L2
+ /* Number of supported C-States */
+ msr.lo &= ~7;
+ msr.lo |= HIGHEST_CLEVEL; // support at most C3
+
wrmsr(PMG_CST_CONFIG_CONTROL, msr);
/* Set Processor MWAIT IO BASE */
@@ -148,9 +159,9 @@ static void configure_c_states(void)
msr.lo = ((PMB0_BASE + 4) & 0xffff) | (((PMB1_BASE + 9) & 0xffff) << 16);
wrmsr(PMG_IO_BASE_ADDR, msr);
- /* Set IO Capture Address */
+ /* Set C_LVL controls and IO Capture Address */
msr.hi = 0;
- msr.lo = ((PMB0_BASE + 4) & 0xffff) | (( CST_RANGE & 0xffff) << 16);
+ msr.lo = (PMB0_BASE + 4) | ((HIGHEST_CLEVEL - 2) << 16); // -2 because LVL0+1 aren't counted
wrmsr(PMG_IO_CAPTURE_ADDR, msr);
}
@@ -229,6 +240,9 @@ static void model_6fx_init(device_t cpu)
x86_setup_mtrrs(36);
x86_mtrr_check();
+ /* Setup Page Attribute Tables (PAT) */
+ // TODO set up PAT
+
#if CONFIG_USBDEBUG_DIRECT
set_ehci_debug(ehci_debug_addr);
#endif
diff --git a/src/cpu/intel/speedstep/Config.lb b/src/cpu/intel/speedstep/Config.lb
new file mode 100644
index 0000000000..6a75160fbb
--- /dev/null
+++ b/src/cpu/intel/speedstep/Config.lb
@@ -0,0 +1 @@
+object acpi.o
diff --git a/src/cpu/intel/speedstep/acpi.c b/src/cpu/intel/speedstep/acpi.c
new file mode 100644
index 0000000000..5bbb52fc02
--- /dev/null
+++ b/src/cpu/intel/speedstep/acpi.c
@@ -0,0 +1,137 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/cpu.h>
+#include <cpu/x86/msr.h>
+#include <device/device.h>
+
+// XXX: PSS table values for power consumption are for Merom only
+
+int determine_total_number_of_cores(void)
+{
+ device_t cpu;
+ int count = 0;
+ for(cpu = all_devices; cpu; cpu = cpu->next) {
+ if ((cpu->path.type != DEVICE_PATH_APIC) ||
+ (cpu->bus->dev->path.type != DEVICE_PATH_APIC_CLUSTER)) {
+ continue;
+ }
+ if (!cpu->enabled) {
+ continue;
+ }
+ count++;
+ }
+ return count;
+}
+
+int get_fsb(void)
+{
+ u32 fsbcode=(rdmsr(0xcd).lo >> 4) & 7;
+ switch (fsbcode) {
+ case 0: return 266;
+ case 1: return 133;
+ case 2: return 200;
+ case 3: return 166;
+ case 5: return 100;
+ }
+ printk_debug("Warning: No supported FSB frequency. Assuming 200MHz\n");
+ return 200;
+}
+
+void generate_cpu_entries(void)
+{
+ int len_sc, len_pr, len_ps;
+ int coreID, cpuID, pcontrol_blk=0x510, plen=6;
+ msr_t msr;
+ len_sc = acpigen_write_scope("\\_PR_");
+ int totalcores = determine_total_number_of_cores();
+ int cores_per_package = (cpuid_ebx(1)>>16) & 0xff;
+ int numcpus = totalcores/cores_per_package; // this assumes that all CPUs share the same layout
+ printk_debug("Found %d CPU(s) with %d core(s) each.\n", numcpus, cores_per_package);
+
+ for (cpuID=1; cpuID <=numcpus; cpuID++) {
+ for (coreID=1; coreID<=cores_per_package; coreID++) {
+ if (coreID>1) {
+ pcontrol_blk = 0;
+ plen = 0;
+ }
+ len_pr = acpigen_write_processor((cpuID-1)*cores_per_package+coreID-1, pcontrol_blk, plen);
+ len_pr += acpigen_write_empty_PCT();
+ len_pr += acpigen_write_PSD_package(cpuID-1,cores_per_package,SW_ANY);
+ len_pr += acpigen_write_name("_PSS");
+
+ int max_states=8;
+ int busratio_step=2;
+#define IA32_PLATFORM_ID 0x017
+#define IA32_PERF_STS 0x198
+ msr = rdmsr(IA32_PERF_STS);
+ int busratio_min=(msr.lo >> 24) & 0x1f;
+ int busratio_max=(msr.hi >> (40-32)) & 0x1f;
+ int vid_min=msr.lo & 0x3f;
+ msr = rdmsr(IA32_PLATFORM_ID);
+ int vid_max=msr.lo & 0x3f;
+ int clock_max=get_fsb()*busratio_max;
+ int clock_min=get_fsb()*busratio_min;
+ printk_debug("clocks between %d and %d MHz.\n", clock_min, clock_max);
+#define MEROM_MIN_POWER 16000
+#define MEROM_MAX_POWER 35000
+ int power_max=MEROM_MAX_POWER;
+ int power_min=MEROM_MIN_POWER;
+
+ int num_states=(busratio_max-busratio_min)/busratio_step;
+ while (num_states > max_states-1) {
+ busratio_step <<= 1;
+ num_states >>= 1;
+ }
+ printk_debug("adding %x P-States between busratio %x and %x, incl. P0\n", num_states+1, busratio_min, busratio_max);
+ int vid_step=(vid_max-vid_min)/num_states;
+ int power_step=(power_max-power_min)/num_states;
+ int clock_step=(clock_max-clock_min)/num_states;
+ len_ps = acpigen_write_package(num_states+1); // for Super LFM, this must be increases by another one
+ len_ps += acpigen_write_PSS_package(clock_max /*mhz*/, power_max /*mW*/, 0 /*lat1*/, 0 /*lat2*/, (busratio_max<<8)|(vid_max) /*control*/, (busratio_max<<8)|(vid_max) /*status*/);
+ int current_busratio=busratio_min+((num_states-1)*busratio_step);
+ int current_vid=vid_min+((num_states-1)*vid_step);
+ int current_power=power_min+((num_states-1)*power_step);
+ int current_clock=clock_min+((num_states-1)*clock_step);
+ int i;
+ for (i=0;i<num_states; i++) {
+ len_ps += acpigen_write_PSS_package(current_clock /*mhz*/, current_power /*mW*/, 0 /*lat1*/, 0 /*lat2*/, (current_busratio<<8)|(current_vid) /*control*/, (current_busratio<<8)|(current_vid) /*status*/);
+ current_busratio -= busratio_step;
+ current_vid -= vid_step;
+ current_power -= power_step;
+ current_clock -= clock_step;
+ }
+ len_ps--;
+ acpigen_patch_len(len_ps);
+ len_pr += acpigen_write_PPC(0);
+ len_pr += len_ps;
+ len_pr--;
+ acpigen_patch_len(len_pr);
+ len_sc += len_pr;
+ }
+ }
+ acpigen_patch_len(len_sc-1);
+}
+
diff --git a/src/cpu/x86/smm/smmrelocate.S b/src/cpu/x86/smm/smmrelocate.S
index 136f5630a1..3d1d9d2664 100644
--- a/src/cpu/x86/smm/smmrelocate.S
+++ b/src/cpu/x86/smm/smmrelocate.S
@@ -20,7 +20,13 @@
*/
#include <arch/asm.h>
-#include "../../../../src/northbridge/intel/i945/ich7.h"
+
+// Make sure no stage 2 code is included:
+#define __ROMCC__
+
+// FIXME: Is this piece of code southbridge specific, or
+// can it be cleaned up so this include is not required?
+#include "../../../southbridge/intel/i82801gx/i82801gx.h"
#undef DEBUG_SMM_RELOCATION
//#define DEBUG_SMM_RELOCATION