summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/soc/broadcom/cygnus/Makefile.inc1
-rw-r--r--src/soc/broadcom/cygnus/include/soc/cygnus.h26
-rw-r--r--src/soc/broadcom/cygnus/soc.c2
-rw-r--r--src/soc/broadcom/cygnus/usb.c166
4 files changed, 195 insertions, 0 deletions
diff --git a/src/soc/broadcom/cygnus/Makefile.inc b/src/soc/broadcom/cygnus/Makefile.inc
index dce4e3d0b1..e22d38dc31 100644
--- a/src/soc/broadcom/cygnus/Makefile.inc
+++ b/src/soc/broadcom/cygnus/Makefile.inc
@@ -54,6 +54,7 @@ ramstage-y += soc.c
ramstage-y += timer.c
ramstage-$(CONFIG_SPI_FLASH) += spi.c
ramstage-$(CONFIG_DRIVERS_UART) += ns16550.c
+ramstage-y += usb.c
CPPFLAGS_common += -Isrc/soc/broadcom/cygnus/include/
diff --git a/src/soc/broadcom/cygnus/include/soc/cygnus.h b/src/soc/broadcom/cygnus/include/soc/cygnus.h
new file mode 100644
index 0000000000..8eb7dff910
--- /dev/null
+++ b/src/soc/broadcom/cygnus/include/soc/cygnus.h
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2015 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __SOC_BROADCOM_CYGNUS_H__
+#define __SOC_BROADCOM_CYGNUS_H__
+
+void usb_init(void);
+
+#endif
+
diff --git a/src/soc/broadcom/cygnus/soc.c b/src/soc/broadcom/cygnus/soc.c
index c9597f2b08..399409f797 100644
--- a/src/soc/broadcom/cygnus/soc.c
+++ b/src/soc/broadcom/cygnus/soc.c
@@ -18,6 +18,7 @@
*/
#include <device/device.h>
+#include <soc/cygnus.h>
#include <soc/sdram.h>
#include <stddef.h>
#include <stdlib.h>
@@ -26,6 +27,7 @@
static void soc_init(device_t dev)
{
ram_resource(dev, 0, (uintptr_t)_dram/KiB, sdram_size_mb()*(MiB/KiB));
+ usb_init();
}
static void soc_noop(device_t dev)
diff --git a/src/soc/broadcom/cygnus/usb.c b/src/soc/broadcom/cygnus/usb.c
new file mode 100644
index 0000000000..d95efd1a87
--- /dev/null
+++ b/src/soc/broadcom/cygnus/usb.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/io.h>
+#include <delay.h>
+#include <console/console.h>
+#include <soc/cygnus.h>
+
+#define CDRU_USBPHY_CLK_RST_SEL_OFFSET 0x11b4
+#define CDRU_USBPHY2_HOST_DEV_SEL_OFFSET 0x11b8
+#define CDRU_SPARE_REG_0_OFFSET 0x1238
+#define CRMU_USB_PHY_AON_CTRL_OFFSET 0x00028
+#define CDRU_USB_DEV_SUSPEND_RESUME_CTRL_OFFSET 0x1210
+#define CDRU_USBPHY_P2_STATUS_OFFSET 0x1200
+
+#define CDRU_USB_DEV_SUSPEND_RESUME_CTRL_DISABLE 0
+#define PHY2_DEV_HOST_CTRL_SEL_DEVICE 0
+#define PHY2_DEV_HOST_CTRL_SEL_HOST 1
+#define CDRU_USBPHY_P2_STATUS__USBPHY_ILDO_ON_FLAG 1
+#define CDRU_USBPHY_P2_STATUS__USBPHY_PLL_LOCK 0
+#define CRMU_USBPHY_P0_AFE_CORERDY_VDDC 1
+#define CRMU_USBPHY_P0_RESETB 2
+#define CRMU_USBPHY_P1_AFE_CORERDY_VDDC 9
+#define CRMU_USBPHY_P1_RESETB 10
+#define CRMU_USBPHY_P2_AFE_CORERDY_VDDC 17
+#define CRMU_USBPHY_P2_RESETB 18
+
+#define USB2_IDM_IDM_IO_CONTROL_DIRECT_OFFSET 0x0408
+#define USB2_IDM_IDM_IO_CONTROL_DIRECT__clk_enable 0
+#define USB2_IDM_IDM_RESET_CONTROL_OFFSET 0x0800
+#define USB2_IDM_IDM_RESET_CONTROL__RESET 0
+
+#define PLL_LOCK_RETRY_COUNT 1000
+#define MAX_REGULATOR_NAME_LEN 25
+#define NUM_PHYS 3
+
+struct bcm_phy_instance {
+ struct phy *generic_phy;
+ int port;
+ int host_mode; /* 1 - Host , 0 - device */
+ int power; /* 1 -powered_on 0 -powered off */
+ struct regulator *vbus_supply;
+};
+
+struct bcm_phy_driver {
+ void *usbphy_regs;
+ void *usb2h_idm_regs;
+ void *usb2d_idm_regs;
+ int num_phys, idm_host_enabled;
+ struct bcm_phy_instance instances[NUM_PHYS];
+};
+
+static struct bcm_phy_driver phy_driver;
+
+static int bcm_phy_init(struct bcm_phy_instance *instance_ptr)
+{
+ /* Only PORT 2 is capabale of being device and host
+ * Default setting is device, check if it is set to host */
+ if (instance_ptr->port == 2) {
+ if (instance_ptr->host_mode == PHY2_DEV_HOST_CTRL_SEL_HOST)
+ write32(phy_driver.usbphy_regs + CDRU_USBPHY2_HOST_DEV_SEL_OFFSET,
+ PHY2_DEV_HOST_CTRL_SEL_HOST);
+ else
+ die("usb device mode unsupported\n");
+ }
+
+ return 0;
+}
+
+static int bcm_phy_poweron(struct bcm_phy_instance *instance_ptr)
+{
+ int clock_reset_flag = 1;
+ u32 val;
+
+ /* Bring the AFE block out of reset to start powering up the PHY */
+ val = read32(phy_driver.usbphy_regs + CRMU_USB_PHY_AON_CTRL_OFFSET);
+ if (instance_ptr->port == 0)
+ val |= (1 << CRMU_USBPHY_P0_AFE_CORERDY_VDDC);
+ else if (instance_ptr->port == 1)
+ val |= (1 << CRMU_USBPHY_P1_AFE_CORERDY_VDDC);
+ else if (instance_ptr->port == 2)
+ val |= (1 << CRMU_USBPHY_P2_AFE_CORERDY_VDDC);
+ write32(phy_driver.usbphy_regs + CRMU_USB_PHY_AON_CTRL_OFFSET, val);
+
+ instance_ptr->power = 1;
+
+ /* Check if the port 2 is configured for device */
+ if (instance_ptr->port == 2 &&
+ instance_ptr->host_mode == PHY2_DEV_HOST_CTRL_SEL_DEVICE)
+ die("usb device mode unsupported\n");
+
+ val = read32(phy_driver.usbphy_regs + CDRU_USBPHY_CLK_RST_SEL_OFFSET);
+
+ /* Check if the phy that is configured
+ * to provide clock and reset is powered on*/
+ if (val >= 0 && val < phy_driver.num_phys) {
+ if (phy_driver.instances[val].power == 1)
+ clock_reset_flag = 0;
+ }
+
+ /* if not set the current phy */
+ if (clock_reset_flag) {
+ val = instance_ptr->port;
+ write32(phy_driver.usbphy_regs + CDRU_USBPHY_CLK_RST_SEL_OFFSET,
+ val);
+ }
+
+ if (phy_driver.idm_host_enabled != 1) {
+ /* Enable clock to USB and get the USB out of reset */
+ setbits_le32(phy_driver.usb2h_idm_regs +
+ USB2_IDM_IDM_IO_CONTROL_DIRECT_OFFSET,
+ (1 << USB2_IDM_IDM_IO_CONTROL_DIRECT__clk_enable));
+ clrbits_le32(phy_driver.usb2h_idm_regs +
+ USB2_IDM_IDM_RESET_CONTROL_OFFSET,
+ (1 << USB2_IDM_IDM_RESET_CONTROL__RESET));
+ phy_driver.idm_host_enabled = 1;
+ }
+
+ return 0;
+}
+
+static int bcm_phy_probe(void)
+{
+ int i;
+
+ phy_driver.num_phys = NUM_PHYS;
+ phy_driver.usbphy_regs = (void *)0x0301c000;
+ phy_driver.usb2h_idm_regs = (void *)0x18115000;
+ phy_driver.usb2d_idm_regs = (void *)0x18111000;
+ phy_driver.idm_host_enabled = 0;
+
+ /* Shutdown all ports. They can be powered up as required */
+ clrbits_le32(phy_driver.usbphy_regs + CRMU_USB_PHY_AON_CTRL_OFFSET,
+ (1 << CRMU_USBPHY_P0_AFE_CORERDY_VDDC) |
+ (1 << CRMU_USBPHY_P0_RESETB) |
+ (1 << CRMU_USBPHY_P1_AFE_CORERDY_VDDC) |
+ (1 << CRMU_USBPHY_P1_RESETB) |
+ (1 << CRMU_USBPHY_P2_AFE_CORERDY_VDDC) |
+ (1 << CRMU_USBPHY_P2_RESETB));
+
+ for (i = 0; i < phy_driver.num_phys; i++) {
+ phy_driver.instances[i].port = i;
+ phy_driver.instances[i].host_mode = PHY2_DEV_HOST_CTRL_SEL_HOST;
+ }
+
+ return 0;
+}
+
+void usb_init(void)
+{
+ bcm_phy_probe();
+ /* currently, we only need thus support port 0 */
+ bcm_phy_init(&phy_driver.instances[0]);
+ bcm_phy_poweron(&phy_driver.instances[0]);
+ printk(BIOS_INFO, "usb phy[%d] is powered on\n", 0);
+}