summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/arch/i386/Config.lb22
-rw-r--r--src/arch/i386/include/arch/hlt.h2
-rw-r--r--src/arch/i386/include/arch/romcc_io.h32
-rw-r--r--src/arch/i386/include/arch/smp/atomic.h4
-rw-r--r--src/arch/i386/include/arch/smp/spinlock.h6
-rw-r--r--src/arch/i386/lib/c_start.S6
-rw-r--r--src/arch/i386/lib/console.c57
-rw-r--r--src/config/Options.lb24
-rw-r--r--src/console/console.c5
-rw-r--r--src/console/printk.c2
-rw-r--r--src/console/vga_console.c6
-rw-r--r--src/cpu/amd/car/clear_1m_ram.c3
-rw-r--r--src/cpu/amd/car/copy_and_run.c33
-rw-r--r--src/cpu/amd/car/disable_cache_as_ram.c5
-rw-r--r--src/cpu/amd/dualcore/Config.lb6
-rw-r--r--src/cpu/amd/dualcore/dualcore.c78
-rw-r--r--src/cpu/amd/dualcore/dualcore_id.c20
-rw-r--r--src/cpu/amd/model_fxx/apic_timer.c3
-rw-r--r--src/cpu/amd/model_fxx/fidvid.c396
-rw-r--r--src/cpu/amd/model_fxx/init_cpus.c35
-rw-r--r--src/cpu/x86/16bit/reset16.lds3
-rw-r--r--src/cpu/x86/32bit/entry32.lds14
-rw-r--r--src/cpu/x86/lapic/lapic_cpu_init.c20
-rw-r--r--src/devices/device.c46
-rw-r--r--src/devices/hypertransport.c94
-rw-r--r--src/devices/pci_device.c2
-rw-r--r--src/devices/pci_rom.c37
-rw-r--r--src/include/cpu/amd/dualcore.h16
-rw-r--r--src/include/cpu/x86/lapic.h11
-rw-r--r--src/include/device/hypertransport.h2
-rw-r--r--src/include/device/pci_ids.h55
-rw-r--r--src/northbridge/amd/amdk8/amdk8.h6
-rw-r--r--src/northbridge/amd/amdk8/coherent_ht.c2
-rw-r--r--src/northbridge/amd/amdk8/debug.c13
-rw-r--r--src/northbridge/amd/amdk8/early_ht.c35
-rw-r--r--src/northbridge/amd/amdk8/incoherent_ht.c360
-rw-r--r--src/northbridge/amd/amdk8/misc_control.c3
-rw-r--r--src/northbridge/amd/amdk8/northbridge.c81
-rw-r--r--src/sdram/generic_sdram.c52
-rw-r--r--src/southbridge/amd/amd8111/amd8111_early_ctrl.c41
-rw-r--r--util/newconfig/config.g17
41 files changed, 1314 insertions, 341 deletions
diff --git a/src/arch/i386/Config.lb b/src/arch/i386/Config.lb
index e9b426cc2d..ebb014f525 100644
--- a/src/arch/i386/Config.lb
+++ b/src/arch/i386/Config.lb
@@ -31,17 +31,17 @@ end
addaction clean "rm -f romimage payload.*"
if CONFIG_USE_INIT
-makerule init.o
- depends "$(INIT-OBJECTS)"
- action "$(LD) -melf_i386 -r -o init.pre.o $(INIT-OBJECTS)"
- action "$(OBJCOPY) --rename-section .text=.init.text --rename-section .data=.init.data --rename-section .rodata=.init.rodata --rename-section .rodata.str1.1=.init.rodata.str1.1 init.pre.o init.o"
-end
-
-makerule linuxbios
- depends "crt0.o init.o linuxbios_ram.rom ldscript.ld"
- action "$(CC) -nostdlib -nostartfiles -static -o $@ -T ldscript.ld crt0.o init.o"
- action "$(CROSS_COMPILE)nm -n linuxbios | sort > linuxbios.map"
-end
+ makerule init.o
+ depends "$(INIT-OBJECTS)"
+ action "$(LD) -melf_i386 -r -o init.pre.o $(INIT-OBJECTS)"
+ action "$(OBJCOPY) --rename-section .text=.init.text --rename-section .data=.init.data --rename-section .rodata=.init.rodata --rename-section .rodata.str1.1=.init.rodata.str1.1 init.pre.o init.o"
+ end
+
+ makerule linuxbios
+ depends "crt0.o init.o linuxbios_ram.rom ldscript.ld"
+ action "$(CC) -nostdlib -nostartfiles -static -o $@ -T ldscript.ld crt0.o init.o"
+ action "$(CROSS_COMPILE)nm -n linuxbios | sort > linuxbios.map"
+ end
end
diff --git a/src/arch/i386/include/arch/hlt.h b/src/arch/i386/include/arch/hlt.h
index 23ff1aa918..3b2acf1eef 100644
--- a/src/arch/i386/include/arch/hlt.h
+++ b/src/arch/i386/include/arch/hlt.h
@@ -7,7 +7,7 @@ static void hlt(void)
__builtin_hlt();
}
#else
-static inline void hlt(void)
+static inline __attribute__((always_inline)) void hlt(void)
{
asm("hlt");
}
diff --git a/src/arch/i386/include/arch/romcc_io.h b/src/arch/i386/include/arch/romcc_io.h
index 1d3e603ed0..c0c2250f98 100644
--- a/src/arch/i386/include/arch/romcc_io.h
+++ b/src/arch/i386/include/arch/romcc_io.h
@@ -117,7 +117,7 @@ static inline int log2f(int value)
typedef unsigned device_t;
-static inline uint8_t pci_read_config8(device_t dev, unsigned where)
+static inline __attribute__((always_inline)) uint8_t pci_read_config8(device_t dev, unsigned where)
{
unsigned addr;
addr = dev | where;
@@ -125,7 +125,7 @@ static inline uint8_t pci_read_config8(device_t dev, unsigned where)
return inb(0xCFC + (addr & 3));
}
-static inline uint16_t pci_read_config16(device_t dev, unsigned where)
+static inline __attribute__((always_inline)) uint16_t pci_read_config16(device_t dev, unsigned where)
{
unsigned addr;
addr = dev | where;
@@ -133,7 +133,7 @@ static inline uint16_t pci_read_config16(device_t dev, unsigned where)
return inw(0xCFC + (addr & 2));
}
-static inline uint32_t pci_read_config32(device_t dev, unsigned where)
+static inline __attribute__((always_inline)) uint32_t pci_read_config32(device_t dev, unsigned where)
{
unsigned addr;
addr = dev | where;
@@ -141,7 +141,7 @@ static inline uint32_t pci_read_config32(device_t dev, unsigned where)
return inl(0xCFC);
}
-static inline void pci_write_config8(device_t dev, unsigned where, uint8_t value)
+static inline __attribute__((always_inline)) void pci_write_config8(device_t dev, unsigned where, uint8_t value)
{
unsigned addr;
addr = dev | where;
@@ -149,7 +149,7 @@ static inline void pci_write_config8(device_t dev, unsigned where, uint8_t value
outb(value, 0xCFC + (addr & 3));
}
-static inline void pci_write_config16(device_t dev, unsigned where, uint16_t value)
+static inline __attribute__((always_inline)) void pci_write_config16(device_t dev, unsigned where, uint16_t value)
{
unsigned addr;
addr = dev | where;
@@ -157,7 +157,7 @@ static inline void pci_write_config16(device_t dev, unsigned where, uint16_t val
outw(value, 0xCFC + (addr & 2));
}
-static inline void pci_write_config32(device_t dev, unsigned where, uint32_t value)
+static inline __attribute__((always_inline)) void pci_write_config32(device_t dev, unsigned where, uint32_t value)
{
unsigned addr;
addr = dev | where;
@@ -180,53 +180,53 @@ static device_t pci_locate_device(unsigned pci_id, device_t dev)
/* Generic functions for pnp devices */
-static inline void pnp_write_config(device_t dev, uint8_t reg, uint8_t value)
+static inline __attribute__((always_inline)) void pnp_write_config(device_t dev, uint8_t reg, uint8_t value)
{
unsigned port = dev >> 8;
outb(reg, port );
outb(value, port +1);
}
-static inline uint8_t pnp_read_config(device_t dev, uint8_t reg)
+static inline __attribute__((always_inline)) uint8_t pnp_read_config(device_t dev, uint8_t reg)
{
unsigned port = dev >> 8;
outb(reg, port);
return inb(port +1);
}
-static inline void pnp_set_logical_device(device_t dev)
+static inline __attribute__((always_inline)) void pnp_set_logical_device(device_t dev)
{
unsigned device = dev & 0xff;
pnp_write_config(dev, 0x07, device);
}
-static inline void pnp_set_enable(device_t dev, int enable)
+static inline __attribute__((always_inline)) void pnp_set_enable(device_t dev, int enable)
{
pnp_write_config(dev, 0x30, enable?0x1:0x0);
}
-static inline int pnp_read_enable(device_t dev)
+static inline __attribute__((always_inline)) int pnp_read_enable(device_t dev)
{
return !!pnp_read_config(dev, 0x30);
}
-static inline void pnp_set_iobase(device_t dev, unsigned index, unsigned iobase)
+static inline __attribute__((always_inline)) void pnp_set_iobase(device_t dev, unsigned index, unsigned iobase)
{
pnp_write_config(dev, index + 0, (iobase >> 8) & 0xff);
pnp_write_config(dev, index + 1, iobase & 0xff);
}
-static inline uint16_t pnp_read_iobase(device_t dev, unsigned index)
+static inline __attribute__((always_inline)) uint16_t pnp_read_iobase(device_t dev, unsigned index)
{
- return (uint16_t)((pnp_read_config(dev, index) << 8) | pnp_read_config(dev, index + 1));
+ return ((uint16_t)(pnp_read_config(dev, index)) << 8) | pnp_read_config(dev, index + 1);
}
-static inline void pnp_set_irq(device_t dev, unsigned index, unsigned irq)
+static inline __attribute__((always_inline)) void pnp_set_irq(device_t dev, unsigned index, unsigned irq)
{
pnp_write_config(dev, index, irq);
}
-static inline void pnp_set_drq(device_t dev, unsigned index, unsigned drq)
+static inline __attribute__((always_inline)) void pnp_set_drq(device_t dev, unsigned index, unsigned drq)
{
pnp_write_config(dev, index, drq & 0xff);
}
diff --git a/src/arch/i386/include/arch/smp/atomic.h b/src/arch/i386/include/arch/smp/atomic.h
index 7b68377c22..7061461d33 100644
--- a/src/arch/i386/include/arch/smp/atomic.h
+++ b/src/arch/i386/include/arch/smp/atomic.h
@@ -41,7 +41,7 @@ typedef struct { volatile int counter; } atomic_t;
* Atomically increments @v by 1. Note that the guaranteed
* useful range of an atomic_t is only 24 bits.
*/
-static __inline__ void atomic_inc(atomic_t *v)
+static __inline__ __attribute__((always_inline)) void atomic_inc(atomic_t *v)
{
__asm__ __volatile__(
"lock ; incl %0"
@@ -56,7 +56,7 @@ static __inline__ void atomic_inc(atomic_t *v)
* Atomically decrements @v by 1. Note that the guaranteed
* useful range of an atomic_t is only 24 bits.
*/
-static __inline__ void atomic_dec(atomic_t *v)
+static __inline__ __attribute__((always_inline)) void atomic_dec(atomic_t *v)
{
__asm__ __volatile__(
"lock ; decl %0"
diff --git a/src/arch/i386/include/arch/smp/spinlock.h b/src/arch/i386/include/arch/smp/spinlock.h
index 65ad8d0673..71015452e8 100644
--- a/src/arch/i386/include/arch/smp/spinlock.h
+++ b/src/arch/i386/include/arch/smp/spinlock.h
@@ -40,14 +40,14 @@ typedef struct {
#define spin_unlock_string \
"movb $1,%0"
-static inline void spin_lock(spinlock_t *lock)
+static inline __attribute__((always_inline)) void spin_lock(spinlock_t *lock)
{
__asm__ __volatile__(
spin_lock_string
:"=m" (lock->lock) : : "memory");
}
-static inline void spin_unlock(spinlock_t *lock)
+static inline __attribute__((always_inline)) void spin_unlock(spinlock_t *lock)
{
__asm__ __volatile__(
spin_unlock_string
@@ -55,7 +55,7 @@ static inline void spin_unlock(spinlock_t *lock)
}
/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
-static inline void cpu_relax(void)
+static inline __attribute__((always_inline)) void cpu_relax(void)
{
__asm__ __volatile__("rep;nop": : :"memory");
}
diff --git a/src/arch/i386/lib/c_start.S b/src/arch/i386/lib/c_start.S
index ce13d150d7..04b5a68676 100644
--- a/src/arch/i386/lib/c_start.S
+++ b/src/arch/i386/lib/c_start.S
@@ -22,18 +22,20 @@ _start:
leal _stack, %edi
movl $_estack, %ecx
subl %edi, %ecx
+ shrl $2, %ecx /* it is 32 bit align, right? */
xorl %eax, %eax
rep
- stosb
+ stosl
/** clear bss */
leal _bss, %edi
movl $_ebss, %ecx
subl %edi, %ecx
jz .Lnobss
+ shrl $2, %ecx /* it is 32 bit align, right? */
xorl %eax, %eax
rep
- stosb
+ stosl
.Lnobss:
/* set new stack */
diff --git a/src/arch/i386/lib/console.c b/src/arch/i386/lib/console.c
index fd1b5d759e..a1f5d6f2a4 100644
--- a/src/arch/i386/lib/console.c
+++ b/src/arch/i386/lib/console.c
@@ -120,58 +120,8 @@ static void print_spew_hex16(unsigned short value){ __console_tx_hex16(BIOS_SPEW
static void print_spew_hex32(unsigned int value) { __console_tx_hex32(BIOS_SPEW, value); }
static void print_spew(const char *str) { __console_tx_string(BIOS_SPEW, str); }
-/* Non inline versions.... */
-#if 0
-static void print_alert_char_(unsigned char value) NOINLINE { print_alert_char(value); }
-static void print_alert_hex8_(unsigned char value) NOINLINE { print_alert_hex8(value); }
-static void print_alert_hex16_(unsigned short value) NOINLINE { print_alert_hex16(value); }
-static void print_alert_hex32_(unsigned int value) NOINLINE { print_alert_hex32(value); }
-static void print_alert_(const char *str) NOINLINE { print_alert(str); }
-
-static void print_crit_char_(unsigned char value) NOINLINE { print_crit_char(value); }
-static void print_crit_hex8_(unsigned char value) NOINLINE { print_crit_hex8(value); }
-static void print_crit_hex16_(unsigned short value) NOINLINE { print_crit_hex16(value); }
-static void print_crit_hex32_(unsigned int value) NOINLINE { print_crit_hex32(value); }
-static void print_crit_(const char *str) NOINLINE { print_crit(str); }
-
-static void print_err_char_(unsigned char value) NOINLINE { print_err_char(value); }
-static void print_err_hex8_(unsigned char value) NOINLINE { print_err_hex8(value); }
-static void print_err_hex16_(unsigned short value) NOINLINE { print_err_hex16(value); }
-static void print_err_hex32_(unsigned int value) NOINLINE { print_err_hex32(value); }
-static void print_err_(const char *str) NOINLINE { print_err(str); }
-
-static void print_warning_char_(unsigned char value) NOINLINE { print_warning_char(value); }
-static void print_warning_hex8_(unsigned char value) NOINLINE { print_warning_hex8(value); }
-static void print_warning_hex16_(unsigned short value) NOINLINE { print_warning_hex16(value); }
-static void print_warning_hex32_(unsigned int value) NOINLINE { print_warning_hex32(value); }
-static void print_warning_(const char *str) NOINLINE { print_warning(str); }
-
-static void print_notice_char_(unsigned char value) NOINLINE { print_notice_char(value); }
-static void print_notice_hex8_(unsigned char value) NOINLINE { print_notice_hex8(value); }
-static void print_notice_hex16_(unsigned short value) NOINLINE { print_notice_hex16(value); }
-static void print_notice_hex32_(unsigned int value) NOINLINE { print_notice_hex32(value); }
-static void print_notice_(const char *str) NOINLINE { print_notice(str); }
-
-static void print_info_char_(unsigned char value) NOINLINE { print_info_char(value); }
-static void print_info_hex8_(unsigned char value) NOINLINE { print_info_hex8(value); }
-static void print_info_hex16_(unsigned short value) NOINLINE { print_info_hex16(value); }
-static void print_info_hex32_(unsigned int value) NOINLINE { print_info_hex32(value); }
-static void print_info_(const char *str) NOINLINE { print_info(str); }
-
-static void print_debug_char_(unsigned char value) NOINLINE { print_debug_char(value); }
-static void print_debug_hex8_(unsigned char value) NOINLINE { print_debug_hex8(value); }
-static void print_debug_hex16_(unsigned short value) NOINLINE { print_debug_hex16(value); }
-static void print_debug_hex32_(unsigned int value) NOINLINE { print_debug_hex32(value); }
-static void print_debug_(const char *str) NOINLINE { print_debug(str); }
-
-static void print_spew_char_(unsigned char value) NOINLINE { print_spew_char(value); }
-static void print_spew_hex8_(unsigned char value) NOINLINE { print_spew_hex8(value); }
-static void print_spew_hex16_(unsigned short value) NOINLINE { print_spew_hex16(value); }
-static void print_spew_hex32_(unsigned int value) NOINLINE { print_spew_hex32(value); }
-static void print_spew_(const char *str) NOINLINE { print_spew(str); }
-#endif
-
-#else
+#else
+/* CONFIG_USE_INIT == 1 */
extern int do_printk(int msg_level, const char *fmt, ...);
@@ -273,12 +223,13 @@ extern int do_printk(int msg_level, const char *fmt, ...);
#define print_spew_hex32(HEX) printk_spew ("%08x", (HEX))
-#endif /* CONFIG_USE_INIT == 0 */
+#endif /* CONFIG_USE_INIT */
#ifndef LINUXBIOS_EXTRA_VERSION
#define LINUXBIOS_EXTRA_VERSION ""
#endif
+
static void console_init(void)
{
static const char console_test[] =
diff --git a/src/config/Options.lb b/src/config/Options.lb
index 0717d38863..857dce8c69 100644
--- a/src/config/Options.lb
+++ b/src/config/Options.lb
@@ -815,6 +815,30 @@ define CK804_DEVN_BASE
comment "CK804 device count from 0 or 1"
end
+define HT_CHAIN_UNITID_BASE
+ default 1
+ export always
+ comment "this will be first hypertransport device's unitid base, if sb ht chain only has one ht device, it could be 0"
+end
+
+define HT_CHAIN_END_UNITID_BASE
+ default 0x20
+ export always
+ comment "this will be unit id of the end of hypertransport chain (usually the real SB) if it is small than HT_CHAIN_UNITID_BASE, it could be 0"
+end
+
+define SB_HT_CHAIN_UNITID_OFFSET_ONLY
+ default 1
+ export always
+ comment "this will decided if only offset SB hypertransport chain"
+end
+
+define K8_SB_HT_CHAIN_ON_BUS0
+ default 0
+ export always
+ comment "this will make SB hypertransport chain sit on bus 0"
+end
+
define K8_HW_MEM_HOLE_SIZEK
default 0
export always
diff --git a/src/console/console.c b/src/console/console.c
index 7f97b5c95f..86ec26d312 100644
--- a/src/console/console.c
+++ b/src/console/console.c
@@ -16,7 +16,7 @@ void console_init(void)
struct console_driver *driver;
if(get_option(&console_loglevel, "debug_level"))
console_loglevel=DEFAULT_CONSOLE_LOGLEVEL;
-
+
for(driver = console_drivers; driver < econsole_drivers; driver++) {
if (!driver->init)
continue;
@@ -57,9 +57,10 @@ unsigned char console_rx_byte(void)
struct console_driver *driver;
if (!initialized)
return 0;
- for(driver = console_drivers; driver < econsole_drivers; driver++)
+ for(driver = console_drivers; driver < econsole_drivers; driver++) {
if (driver->tst_byte)
break;
+ }
if (driver == econsole_drivers)
return 0;
while (!driver->tst_byte());
diff --git a/src/console/printk.c b/src/console/printk.c
index da330c932b..01a52afc4c 100644
--- a/src/console/printk.c
+++ b/src/console/printk.c
@@ -25,7 +25,7 @@ int default_console_loglevel = DEFAULT_CONSOLE_LOGLEVEL;
void display(char*);
extern int vtxprintf(void (*)(unsigned char), const char *, va_list);
-spinlock_t console_lock = SPIN_LOCK_UNLOCKED;
+static spinlock_t console_lock = SPIN_LOCK_UNLOCKED;
int do_printk(int msg_level, const char *fmt, ...)
{
diff --git a/src/console/vga_console.c b/src/console/vga_console.c
index bdd56f3923..e9756c8996 100644
--- a/src/console/vga_console.c
+++ b/src/console/vga_console.c
@@ -15,11 +15,7 @@ static char *vidmem;
int vga_line, vga_col;
-#if CONFIG_CONSOLE_VGA == 1
-extern int vga_inited; // it will be changed in pci_rom.c
-#else
-int vga_inited = 0;
-#endif
+int vga_inited = 0; // it will be changed in pci_rom.c
static int vga_console_inited = 0;
diff --git a/src/cpu/amd/car/clear_1m_ram.c b/src/cpu/amd/car/clear_1m_ram.c
index 85ba59cf73..80b215e502 100644
--- a/src/cpu/amd/car/clear_1m_ram.c
+++ b/src/cpu/amd/car/clear_1m_ram.c
@@ -1,5 +1,7 @@
/* by yhlu 6.2005 */
/* be warned, this file will be used core 0/node 0 only */
+static inline __attribute__((always_inline)) void clear_1m_ram(void)
+{
__asm__ volatile (
/* disable cache */
@@ -51,3 +53,4 @@
"invd\n\t"
);
+}
diff --git a/src/cpu/amd/car/copy_and_run.c b/src/cpu/amd/car/copy_and_run.c
index 89a864d4fc..9c6508b8d7 100644
--- a/src/cpu/amd/car/copy_and_run.c
+++ b/src/cpu/amd/car/copy_and_run.c
@@ -28,10 +28,18 @@
#define GETBIT(bb, src, ilen) GETBIT_LE32(bb, src, ilen)
#endif
+static inline void print_debug_cp_run(const char *strval, uint32_t val)
+{
+#if CONFIG_USE_INIT
+ printk_debug("%s%08x\r\n", strval, val);
+#else
+ print_debug(strval); print_debug_hex32(val); print_debug("\r\n");
+#endif
+}
+
static void copy_and_run(unsigned cpu_reset)
{
uint8_t *src, *dst;
- unsigned long dst_len;
unsigned long ilen = 0, olen = 0, last_m_off = 1;
uint32_t bb = 0;
unsigned bc = 0;
@@ -44,9 +52,9 @@ static void copy_and_run(unsigned cpu_reset)
"leal _iseg, %1\n\t"
"leal _eiseg, %2\n\t"
"subl %1, %2\n\t"
- : "=a" (src), "=b" (dst), "=c" (dst_len)
+ : "=a" (src), "=b" (dst), "=c" (olen)
);
- memcpy(src, dst, dst_len);
+ memcpy(src, dst, olen);
#else
__asm__ volatile (
@@ -55,13 +63,10 @@ static void copy_and_run(unsigned cpu_reset)
: "=a" (src) , "=b" (dst)
);
-#if CONFIG_USE_INIT
- printk_debug("src=%08x\r\n",src);
- printk_debug("dst=%08x\r\n",dst);
-#else
- print_debug("src="); print_debug_hex32(src); print_debug("\r\n");
- print_debug("dst="); print_debug_hex32(dst); print_debug("\r\n");
-#endif
+ print_debug_cp_run("src=",(uint32_t)src);
+ print_debug_cp_run("dst=",(uint32_t)dst);
+
+// dump_mem(src, src+0x100);
for(;;) {
unsigned int m_off, m_len;
@@ -105,11 +110,9 @@ static void copy_and_run(unsigned cpu_reset)
}
#endif
// dump_mem(dst, dst+0x100);
-#if CONFIG_USE_INIT
- printk_debug("linxbios_ram.bin length = %08x\r\n", olen);
-#else
- print_debug("linxbios_ram.bin length = "); print_debug_hex32(olen); print_debug("\r\n");
-#endif
+
+ print_debug_cp_run("linxbios_ram.bin length = ", olen);
+
print_debug("Jumping to LinuxBIOS.\r\n");
if(cpu_reset == 1 ) {
diff --git a/src/cpu/amd/car/disable_cache_as_ram.c b/src/cpu/amd/car/disable_cache_as_ram.c
index a699cae99b..06a558f413 100644
--- a/src/cpu/amd/car/disable_cache_as_ram.c
+++ b/src/cpu/amd/car/disable_cache_as_ram.c
@@ -1,11 +1,12 @@
/* by yhlu 6.2005 */
/* be warned, this file will be used other cores and core 0 / node 0 */
+static inline __attribute__((always_inline)) void disable_cache_as_ram(void)
+{
__asm__ volatile (
/*
FIXME : backup stack in CACHE_AS_RAM into mmx and sse and after we get STACK up, we restore that.
It is only needed if we want to go back
*/
-
/* We don't need cache as ram for now on */
/* disable cache */
"movl %cr0, %eax\n\t"
@@ -42,5 +43,5 @@
"movl %cr0, %eax\n\t"
"andl $0x9fffffff,%eax\n\t"
"movl %eax, %cr0\n\t"
-
);
+}
diff --git a/src/cpu/amd/dualcore/Config.lb b/src/cpu/amd/dualcore/Config.lb
index dd8dd09963..acc5d2e2f8 100644
--- a/src/cpu/amd/dualcore/Config.lb
+++ b/src/cpu/amd/dualcore/Config.lb
@@ -1,5 +1 @@
-uses CONFIG_LOGICAL_CPUS
-
-if CONFIG_LOGICAL_CPUS
- object amd_sibling.o
-end
+object amd_sibling.o
diff --git a/src/cpu/amd/dualcore/dualcore.c b/src/cpu/amd/dualcore/dualcore.c
index 3923891678..e2158424e6 100644
--- a/src/cpu/amd/dualcore/dualcore.c
+++ b/src/cpu/amd/dualcore/dualcore.c
@@ -1,31 +1,72 @@
/* 2004.12 yhlu add dual core support */
+
+#ifndef SET_NB_CFG_54
+ #define SET_NB_CFG_54 1
+#endif
+
#include "cpu/amd/dualcore/dualcore_id.c"
static inline unsigned get_core_num_in_bsp(unsigned nodeid)
{
- return ((pci_read_config32(PCI_DEV(0, 0x18+nodeid, 3), 0xe8)>>12) & 3);
+ uint32_t dword;
+ dword = pci_read_config32(PCI_DEV(0, 0x18+nodeid, 3), 0xe8);
+ dword >>= 12;
+ dword &= 3;
+ return dword;
}
-static inline uint8_t set_apicid_cpuid_lo(void)
+#if SET_NB_CFG_54 == 1
+static inline uint8_t set_apicid_cpuid_lo(void)
{
if(is_cpu_pre_e0()) return 0; // pre_e0 can not be set
-
- if(read_option(CMOS_VSTART_dual_core, CMOS_VLEN_dual_core, 0) != 0) { // disable dual_core
- return 0;
- }
-
- // set the NB_CFG[54]=1; why the OS will be happy with that ???
+ // set the NB_CFG[54]=1; why the OS will be happy with that ???
msr_t msr;
msr = rdmsr(NB_CFG_MSR);
msr.hi |= (1<<(54-32)); // InitApicIdCpuIdLo
wrmsr(NB_CFG_MSR, msr);
return 1;
+}
+#else
+
+static inline void set_apicid_cpuid_lo(void) { }
+
+#endif
+static inline void real_start_other_core(unsigned nodeid)
+{
+ uint32_t dword;
+ // set PCI_DEV(0, 0x18+nodeid, 3), 0x44 bit 27 to redirect all MC4 accesses and error logging to core0
+ dword = pci_read_config32(PCI_DEV(0, 0x18+nodeid, 3), 0x44);
+ dword |= 1<<27; // NbMcaToMstCpuEn bit
+ pci_write_config32(PCI_DEV(0, 0x18+nodeid, 3), 0x44, dword);
+ // set PCI_DEV(0, 0x18+nodeid, 0), 0x68 bit 5 to start core1
+ dword = pci_read_config32(PCI_DEV(0, 0x18+nodeid, 0), 0x68);
+ dword |= 1<<5;
+ pci_write_config32(PCI_DEV(0, 0x18+nodeid, 0), 0x68, dword);
}
+//it is running on core0 of node0
+static inline void start_other_cores(void)
+{
+ unsigned nodes;
+ unsigned nodeid;
+
+ if(read_option(CMOS_VSTART_dual_core, CMOS_VLEN_dual_core, 0) != 0) { // disable dual_core
+ return;
+ }
+
+ nodes = get_nodes();
+
+ for(nodeid=0; nodeid<nodes; nodeid++) {
+ if( get_core_num_in_bsp(nodeid) > 0) {
+ real_start_other_core(nodeid);
+ }
+ }
+
+}
#if USE_DCACHE_RAM == 0
static void do_k8_init_and_stop_secondaries(void)
{
@@ -62,7 +103,26 @@ static void do_k8_init_and_stop_secondaries(void)
pci_write_config32(dev_f0, 0x68, val);
/* Set the lapicid */
- lapic_write(LAPIC_ID,(0x10 + id.coreid*0x10 + id.nodeid) << 24);
+ #if (ENABLE_APIC_EXT_ID == 1)
+ unsigned initial_apicid = get_initial_apicid();
+ #if LIFT_BSP_APIC_ID == 0
+ if( initial_apicid != 0 ) // other than bsp
+ #endif
+ {
+ /* use initial apic id to lift it */
+ uint32_t dword = lapic_read(LAPIC_ID);
+ dword &= ~(0xff<<24);
+ dword |= (((initial_apicid + APIC_ID_OFFSET) & 0xff)<<24);
+
+ lapic_write(LAPIC_ID, dword);
+ }
+
+ #if LIFT_BSP_APIC_ID == 1
+ bsp_apicid += APIC_ID_OFFSET;
+ #endif
+
+ #endif
+
/* Remember the cpuid */
if (id.coreid == 0) {
diff --git a/src/cpu/amd/dualcore/dualcore_id.c b/src/cpu/amd/dualcore/dualcore_id.c
index a1a898a4fa..389969795b 100644
--- a/src/cpu/amd/dualcore/dualcore_id.c
+++ b/src/cpu/amd/dualcore/dualcore_id.c
@@ -1,26 +1,27 @@
/* 2004.12 yhlu add dual core support */
#include <arch/cpu.h>
+#include <cpu/amd/dualcore.h>
+#ifdef __ROMCC__
#include <cpu/amd/model_fxx_msr.h>
+#endif
-static inline unsigned int read_nb_cfg_54(void)
+//called by bus_cpu_scan too
+unsigned int read_nb_cfg_54(void)
{
msr_t msr;
msr = rdmsr(NB_CFG_MSR);
return ( ( msr.hi >> (54-32)) & 1);
}
-struct node_core_id {
- unsigned nodeid:8;
- unsigned coreid:8;
-};
-
-static inline unsigned get_initial_apicid(void)
+static inline unsigned get_initial_apicid(void)
{
return ((cpuid_ebx(1) >> 24) & 0xf);
}
-static inline struct node_core_id get_node_core_id(unsigned nb_cfg_54) {
+//called by amd_siblings too
+struct node_core_id get_node_core_id(unsigned nb_cfg_54)
+{
struct node_core_id id;
// get the apicid via cpuid(1) ebx[27:24]
if( nb_cfg_54) {
@@ -45,6 +46,7 @@ static inline unsigned get_core_num(void)
}
static inline struct node_core_id get_node_core_id_x(void) {
- return get_node_core_id( read_nb_cfg_54() );
+
+ return get_node_core_id( read_nb_cfg_54() ); // for pre_e0() nb_cfg_54 always be 0
}
diff --git a/src/cpu/amd/model_fxx/apic_timer.c b/src/cpu/amd/model_fxx/apic_timer.c
index 5a81f912c5..8eeb32fee9 100644
--- a/src/cpu/amd/model_fxx/apic_timer.c
+++ b/src/cpu/amd/model_fxx/apic_timer.c
@@ -7,10 +7,13 @@ void init_timer(void)
{
/* Set the apic timer to no interrupts and periodic mode */
lapic_write(LAPIC_LVTT, (1 << 17)|(1<< 16)|(0 << 12)|(0 << 0));
+
/* Set the divider to 1, no divider */
lapic_write(LAPIC_TDCR, LAPIC_TDR_DIV_1);
+
/* Set the initial counter to 0xffffffff */
lapic_write(LAPIC_TMICT, 0xffffffff);
+
}
void udelay(unsigned usecs)
diff --git a/src/cpu/amd/model_fxx/fidvid.c b/src/cpu/amd/model_fxx/fidvid.c
new file mode 100644
index 0000000000..8d1b84c24f
--- /dev/null
+++ b/src/cpu/amd/model_fxx/fidvid.c
@@ -0,0 +1,396 @@
+#if K8_SET_FIDVID == 1
+
+#define K8_SET_FIDVID_DEBUG 0
+
+#define K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST 1
+
+static inline void print_debug_fv(const char *str, unsigned val)
+{
+#if K8_SET_FIDVID_DEBUG == 1
+ #if CONFIG_USE_INIT==1
+ printk_debug("%s%x\r\n", str, val);
+ #else
+ print_debug(str); print_debug_hex32(val); print_debug("\r\n");
+ #endif
+#endif
+}
+
+static inline void print_debug_fv_8(const char *str, unsigned val)
+{
+#if K8_SET_FIDVID_DEBUG == 1
+ #if CONFIG_USE_INIT==1
+ printk_debug("%s%02x\r\n", str, val);
+ #else
+ print_debug(str); print_debug_hex8(val); print_debug("\r\n");
+ #endif
+#endif
+}
+
+static inline void print_debug_fv_64(const char *str, unsigned val, unsigned val2)
+{
+#if K8_SET_FIDVID_DEBUG == 1
+ #if CONFIG_USE_INIT==1
+ printk_debug("%s%x%x\r\n", str, val, val2);
+ #else
+ print_debug(str); print_debug_hex32(val); print_debug_hex32(val2); print_debug("\r\n");
+ #endif
+#endif
+}
+
+
+static void enable_fid_change(void)
+{
+ uint32_t dword;
+ unsigned nodes;
+ int i;
+
+ nodes = ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1;
+
+ for(i=0; i<nodes; i++) {
+ dword = pci_read_config32(PCI_DEV(0, 0x18+i, 3), 0xd8);
+ dword &= 0x8ff00000;
+ dword |= (2<<28) | (0x02710);
+ pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0xd8, dword);
+
+ dword = 0x04e2a707;
+ pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0xd4, dword);
+
+ dword = pci_read_config32(PCI_DEV(0, 0x18+i, 2), 0x94);
+ dword |= (1<<14);// disable the DRAM interface at first, it will be enabled by raminit again
+ pci_write_config32(PCI_DEV(0, 0x18+i, 2), 0x94, dword);
+
+ dword = 0x23070000; //enable FID/VID change
+// dword = 0x00070000; //enable FID/VID change
+ pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0x80, dword);
+
+ dword = 0x00132113;
+ pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0x84, dword);
+
+ }
+}
+
+static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage)
+{
+ //for (cur, new) there is one <1600MHz x8 to find out next_fid
+ const static uint8_t next_fid_a[] = {
+ /* x4 x5 x6 x7 x8 x9 x10 x11 x12 x13 x14 x15 */ // 0:x4, 2:x5....BASE=4, MIN=4, MAX=25, INC=2 result = (xX-BASE)*INC
+/* x4 */ 0, 9, 9, 8, 9, 9, 9, 9, 9, 9, 9, 9,
+/* x5 */ 9, 0, 11, 11, 9, 9, 10, 11, 11, 11, 11, 11,
+/* x6 */ 11, 11, 0, 13, 11, 11, 11, 11, 12, 13, 13, 13,
+/* x7 */ 13, 13, 13, 0, 13, 13, 13, 13, 13, 13, 14, 15,
+/* x8 */ 4, 9, 9, 9, 0, 9, 9, 9, 9, 9, 9, 9,
+/* x9 */ 4, 5, 10, 10, 8, 0, 0, 0, 0, 0, 0, 0,
+/*x10 */ 9, 5, 11, 11, 9, 0, 0, 0, 0, 0, 0, 0,
+/*x11 */ 10, 5, 6, 12, 10, 0, 0, 0, 0, 0, 0, 0,
+/*x12 */ 11, 11, 6, 13, 11, 0, 0, 0, 0, 0, 0, 0,
+/*x13 */ 12, 12, 6, 7, 12, 0, 0, 0, 0, 0, 0, 0,
+/*x14 */ 13, 13, 13, 7, 13, 0, 0, 0, 0, 0, 0, 0,
+/*x15 */ 14, 14, 14, 7, 14, 0, 0, 0, 0, 0, 0, 0,
+ };
+
+ msr_t msr;
+ uint32_t vid;
+ uint32_t fid;
+ uint32_t vid_max;
+ uint32_t fid_max;
+ uint32_t vid_cur;
+ uint32_t fid_cur;
+ unsigned apicidx;
+
+ int steps;
+ int loop;
+
+ apicidx = lapicid();
+
+ if(apicid!=apicidx) {
+#if CONFIG_USE_INIT == 1
+ printk_err("wrong apicid, we want change %x, but it is %x\r\n", apicid, apicidx);
+#else
+ print_err("wrong apicid, we want change "); print_err_hex8(apicid); print_err(" but it is "); print_err_hex8(apicidx); print_err("\r\n");
+#endif
+ return fidvid;
+ }
+
+ fid = (fidvid >> 8) & 0x3f;
+ vid = (fidvid >> 16) & 0x3f;
+
+ msr = rdmsr(0xc0010042);
+
+ vid_cur = msr.hi & 0x3f;
+ fid_cur = msr.lo & 0x3f;
+
+ if((vid_cur==vid) && (fid_cur==fid)) return fidvid;
+
+ vid_max = (msr.hi>>(48-32)) & 0x3f;
+ fid_max = (msr.lo>>16) & 0x3f;
+
+ //set vid to max
+ msr.hi = 1;
+ msr.lo = (vid_max<<8) | (fid_cur);
+ msr.lo |= (1<<16); // init changes
+ wrmsr(0xc0010041, msr);
+
+ for(loop=0;loop<100000;loop++){
+ msr = rdmsr(0xc0010042);
+ if(!(msr.lo & (1<<31))) break;
+ }
+ vid_cur = msr.hi & 0x3f;
+
+ steps = 8; //??
+ while((fid_cur!=fid) && (steps-->0)) {
+ uint32_t fid_temp;
+ if((fid_cur > (8-4)*2) && (fid> (8-4)*2)) {
+ if(fid_cur<fid) {
+ fid_temp = fid_cur + 2;
+ } else {
+ fid_temp = fid_cur - 2;
+ }
+ }
+ else { //there is one < 8, So we need to lookup the table to find the fid_cur
+ int temp;
+ temp = next_fid_a[(fid_cur/2)*12+(fid/2)];
+ if(temp <= 0) break;
+ fid_temp = (temp-4) * 2;
+ }
+ if(fid_temp>fid_max) break;
+
+ fid_cur = fid_temp;
+
+ //set target fid
+ msr.hi = (100000/5);
+ msr.lo = (vid_cur<<8) | fid_cur;
+ msr.lo |= (1<<16); // init changes
+ wrmsr(0xc0010041, msr);
+
+
+#if K8_SET_FIDVID_DEBUG == 1
+ if(showmessage) {
+ print_debug_fv_8("\tapicid in set_fidvid = ", apicid);
+ print_debug_fv_64("ctrl msr fid, vid ", msr.hi, msr.lo);
+ }
+#endif
+
+ for(loop=0;loop<100000;loop++){
+ msr = rdmsr(0xc0010042);
+ if(!(msr.lo & (1<<31))) break;
+ }
+ fid_cur = msr.lo & 0x3f;
+
+#if K8_SET_FIDVID_DEBUG == 1
+ if(showmessage) {
+ print_debug_fv_64("status msr fid, vid ", msr.hi, msr.lo);
+ }
+#endif
+ }
+
+ //set vid to final
+ msr.hi = 1;
+ msr.lo = (vid<<8) | (fid_cur);
+ msr.lo |= (1<<16); // init changes
+ wrmsr(0xc0010041, msr);
+
+ for(loop=0;loop<100000;loop++){
+ msr = rdmsr(0xc0010042);
+ if(!(msr.lo & (1<<31))) break;
+ }
+ vid_cur = msr.hi & 0x3f;
+
+ fidvid = (vid_cur<< 16) | (fid_cur<<8);
+
+ if(showmessage) {
+ if((fid!=fid_cur) || (vid!=vid_cur)) {
+ print_err("set fidvid failed\r\n");
+ }
+ }
+
+ return fidvid;
+
+}
+
+static void init_fidvid_ap(unsigned bsp_apicid, unsigned apicid)
+{
+
+ uint32_t send;
+ uint32_t readback;
+ msr_t msr;
+ uint32_t vid_cur;
+ uint32_t fid_cur;
+ int loop;
+
+ msr = rdmsr(0xc0010042);
+ send = ((msr.lo>>16) & 0x3f) << 8; //max fid
+ send |= ((msr.hi>>(48-32)) & 0x3f) << 16; //max vid
+ send |= (apicid<<24); // ap apicid
+
+ vid_cur = msr.hi & 0x3f;
+ fid_cur = msr.lo & 0x3f;
+
+ // set to current
+ msr.hi = 1;
+ msr.lo = (vid_cur<<8) | (fid_cur);
+ wrmsr(0xc0010041, msr);
+
+ wait_cpu_state(bsp_apicid, 1);
+ //send signal to BSP about this AP max fid and vid
+ lapic_write(LAPIC_MSG_REG, send | 1); //AP at state 1 that sent our fid and vid
+
+// wait_cpu_state(bsp_apicid, 2);// don't need we can use apicid directly
+ loop = 100000;
+ while(--loop>0) {
+ //remote read BSP signal that include vid and fid that need to set
+ if(lapic_remote_read(bsp_apicid, LAPIC_MSG_REG, &readback)!=0) continue;
+ if(((readback>>24) & 0xff) == apicid) break; // it is this cpu turn
+ }
+
+ if(loop>0) {
+ readback = set_fidvid(apicid, readback & 0xffff00, 1); // this AP
+ //send signal to BSP that this AP fid/vid is set // allow to change state2 is together with apicid
+ send = (apicid<<24) | (readback & 0x00ffff00); // AP at state that We set the requested fid/vid
+ }
+
+ lapic_write(LAPIC_MSG_REG, send | 2);
+
+ wait_cpu_state(bsp_apicid, 3);
+}
+
+static unsigned calc_common_fidvid(unsigned fidvid, unsigned fidvidx)
+{
+ /* FIXME: need to check the change path to verify if it is reachable when common fid is small than 1.6G */
+ if((fidvid & 0xff00)<=(fidvidx & 0xff00)) {
+ return fidvid;
+ }
+ else {
+ return fidvidx;
+ }
+}
+
+struct fidvid_st {
+ unsigned common_fidvid;
+};
+
+static void init_fidvid_bsp_stage1(unsigned ap_apicid, void *gp )
+{
+ unsigned readback;
+
+ struct fidvid_st *fvp = gp;
+ int loop;
+
+ print_debug_fv("state 1: ap_apicid=", ap_apicid);
+
+ loop = 100000;
+ while(--loop > 0) {
+ if(lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback)!=0) continue;
+ if((readback & 0xff) == 1) break; //target ap is in stage 1
+ }
+
+ print_debug_fv("\treadback=", readback);
+
+ fvp->common_fidvid = calc_common_fidvid(fvp->common_fidvid, readback & 0xffff00);
+
+ print_debug_fv("\tcommon_fidvid=", fvp->common_fidvid);
+
+}
+static void init_fidvid_bsp_stage2(unsigned ap_apicid, void *gp)
+{
+ unsigned readback;
+
+ struct fidvid_st *fvp = gp;
+ int loop;
+
+ print_debug_fv("state 2: ap_apicid=", ap_apicid);
+
+ lapic_write(LAPIC_MSG_REG, fvp->common_fidvid | (ap_apicid<<24) | 2); // all set to state2
+
+ loop = 100000;
+ while(--loop > 0) {
+ if(lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback)!=0) continue;
+ if((readback & 0xff) == 2) break; // target ap is stage 2, and it'd FID has beed set
+ }
+
+ print_debug_fv("\treadback=", readback);
+}
+
+#if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1
+struct ap_apicid_st {
+ unsigned num;
+ unsigned apicid[16]; // 8 way dual core need 16
+ /* FIXME: 32 node quad core, may need 128 */
+};
+
+static void store_ap_apicid(unsigned ap_apicid, void *gp)
+{
+ struct ap_apicid_st *p = gp;
+
+ p->apicid[p->num++] = ap_apicid;
+
+}
+#endif
+
+static void init_fidvid_bsp(unsigned bsp_apicid)
+{
+ uint32_t vid_max;
+ uint32_t fid_max;
+
+ struct fidvid_st fv;
+
+#if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1
+ struct ap_apicid_st ap_apicidx;
+ unsigned i;
+#endif
+
+
+ msr_t msr;
+ msr = rdmsr(0xc0010042);
+ fid_max = ((msr.lo>>16) & 0x3f); //max fid
+ vid_max = ((msr.hi>>(48-32)) & 0x3f); //max vid
+ fv.common_fidvid = (fid_max<<8)|(vid_max<<16);
+
+
+ // for all APs (We know the APIC ID of all APs even the APIC ID is lifted)
+ // remote read from AP about max fid/vid
+
+ //let all ap trains to state 1
+ lapic_write(LAPIC_MSG_REG, (bsp_apicid<<24) | 1);
+
+ // calculate the common max fid/vid that could be used for all APs and BSP
+#if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1
+ ap_apicidx.num = 0;
+
+ for_each_ap(bsp_apicid, K8_SET_FIDVID_CORE0_ONLY, store_ap_apicid, &ap_apicidx);
+
+ for(i=0;i<ap_apicidx.num;i++) {
+ init_fidvid_bsp_stage1(ap_apicidx.apicid[i], &fv);
+ }
+#else
+ for_each_ap(bsp_apicid, K8_SET_FIDVID_CORE0_ONLY, init_fidvid_bsp_stage1, &fv);
+#endif
+
+
+ // set BSP fid and vid
+ print_debug_fv("bsp apicid=", bsp_apicid);
+ fv.common_fidvid = set_fidvid(bsp_apicid, fv.common_fidvid, 1);
+ print_debug_fv("common_fidvid=", fv.common_fidvid);
+
+
+ //for all APs ( We know the APIC ID of all AP even the APIC ID is lifted)
+ // send signal to the AP it could change it's fid/vid
+ // remote read singnal from AP that AP is done
+
+ fv.common_fidvid &= 0xffff00;
+
+ //set state 2 allow is in init_fidvid_bsp_stage2
+#if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1
+ for(i=0;i<ap_apicidx.num;i++) {
+ init_fidvid_bsp_stage2(ap_apicidx.apicid[i], &fv);
+ }
+#else
+ for_each_ap(bsp_apicid, K8_SET_FIDVID_CORE0_ONLY, init_fidvid_bsp_stage2, &fv);
+#endif
+
+ lapic_write(LAPIC_MSG_REG, fv.common_fidvid | (bsp_apicid<<24) | 3); // clear the state
+
+ //here wait a while, so last ap could read pack, and stop it, don't call init_timer too early or just don't use init_timer
+
+}
+
+#endif
diff --git a/src/cpu/amd/model_fxx/init_cpus.c b/src/cpu/amd/model_fxx/init_cpus.c
index 9e1772e8f8..718a0f6295 100644
--- a/src/cpu/amd/model_fxx/init_cpus.c
+++ b/src/cpu/amd/model_fxx/init_cpus.c
@@ -1,4 +1,13 @@
//it takes the ENABLE_APIC_EXT_ID and APIC_ID_OFFSET and LIFT_BSP_APIC_ID
+#ifndef K8_SET_FIDVID
+ #define K8_SET_FIDVID 0
+
+#endif
+
+#ifndef K8_SET_FIDVID_CORE0_ONLY
+ /* MSR FIDVID_CTL and FIDVID_STATUS are shared by cores, so may don't need to do twice*/
+ #define K8_SET_FIDVID_CORE0_ONLY 1
+#endif
typedef void (*process_ap_t)(unsigned apicid, void *gp);
@@ -100,6 +109,10 @@ static inline int lapic_remote_read(int apicid, int reg, unsigned *pvalue)
#define LAPIC_MSG_REG 0x380
+#if K8_SET_FIDVID == 1
+static void init_fidvid_ap(unsigned bsp_apicid, unsigned apicid);
+#endif
+
static inline __attribute__((always_inline)) void print_apicid_nodeid_coreid(unsigned apicid, struct node_core_id id, const char *str)
{
#if CONFIG_USE_INIT == 0
@@ -139,7 +152,11 @@ static void allow_all_aps_stop(unsigned bsp_apicid)
}
+#if RAMINIT_SYSINFO == 1
+static unsigned init_cpus(unsigned cpu_init_detectedx ,struct sys_info *sysinfo)
+#else
static unsigned init_cpus(unsigned cpu_init_detectedx)
+#endif
{
unsigned bsp_apicid = 0;
unsigned apicid;
@@ -193,7 +210,7 @@ static unsigned init_cpus(unsigned cpu_init_detectedx)
if (id.nodeid!=0) //all core0 except bsp
print_apicid_nodeid_coreid(apicid, id, " core0: ");
}
- #if 1
+ #if 0
else { //all core1
print_apicid_nodeid_coreid(apicid, id, " core1: ");
}
@@ -202,11 +219,20 @@ static unsigned init_cpus(unsigned cpu_init_detectedx)
#endif
if (cpu_init_detectedx) {
+ #if RAMINIT_SYSINFO == 1
+ //We need to init sblnk and sbbusn, because it is called before ht_setup_chains_x
+ sysinfo->sblnk = get_sblnk();
+ sysinfo->sbbusn = node_link_to_bus(0, sysinfo->sblnk);
+ #endif
print_apicid_nodeid_coreid(apicid, id, "\r\n\r\n\r\nINIT detect from ");
print_debug("\r\nIssuing SOFT_RESET...\r\n");
+ #if RAMINIT_SYSINFO == 1
+ soft_reset(sysinfo);
+ #else
soft_reset();
+ #endif
}
@@ -219,6 +245,13 @@ static unsigned init_cpus(unsigned cpu_init_detectedx)
lapic_write(LAPIC_MSG_REG, (apicid<<24) | 0x33); // mark the cpu is started
if(apicid != bsp_apicid) {
+ #if K8_SET_FIDVID == 1
+ #if (CONFIG_LOGICAL_CPUS == 1) && (K8_SET_FIDVID_CORE0_ONLY == 1)
+ if(id.coreid == 0 ) // only need set fid for core0
+ #endif
+ init_fidvid_ap(bsp_apicid, apicid);
+ #endif
+
// We need to stop the CACHE as RAM for this CPU, really?
wait_cpu_state(bsp_apicid, 0x44);
lapic_write(LAPIC_MSG_REG, (apicid<<24) | 0x44); // bsp can not check it before stop_this_cpu
diff --git a/src/cpu/x86/16bit/reset16.lds b/src/cpu/x86/16bit/reset16.lds
index f32597c00c..0ba54c9487 100644
--- a/src/cpu/x86/16bit/reset16.lds
+++ b/src/cpu/x86/16bit/reset16.lds
@@ -5,7 +5,8 @@
SECTIONS {
/* Trigger an error if I have an unuseable start address */
- _ROMTOP = (_start >= 0xffff0000) ? 0xfffffff0 : 0xfffffff8;
+ _bogus = ASSERT(_start >= 0xffff0000, "_start to low please decrease ROM_IMAGE_SIZE");
+ _ROMTOP = 0xfffffff0;
. = _ROMTOP;
.reset . : {
*(.reset)
diff --git a/src/cpu/x86/32bit/entry32.lds b/src/cpu/x86/32bit/entry32.lds
index 37a75ba6ae..e69de29bb2 100644
--- a/src/cpu/x86/32bit/entry32.lds
+++ b/src/cpu/x86/32bit/entry32.lds
@@ -1,14 +0,0 @@
-/*
- _cache_ram_seg_base = DEFINED(CACHE_RAM_BASE)? CACHE_RAM_BASE - _rodata : 0;
- _cache_ram_seg_base_low = (_cache_ram_seg_base) & 0xffff;
- _cache_ram_seg_base_middle = (_cache_ram_seg_base >> 16) & 0xff;
- _cache_ram_seg_base_high = (_cache_ram_seg_base >> 24) & 0xff;
-
- _rom_code_seg_base = _ltext - _text;
- _rom_code_seg_base_low = (_rom_code_seg_base) & 0xffff;
- _rom_code_seg_base_middle = (_rom_code_seg_base >> 16) & 0xff;
- _rom_code_seg_base_high = (_rom_code_seg_base >> 24) & 0xff;
-*/
-
-
-
diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c
index 7f348790e5..4e7e696c47 100644
--- a/src/cpu/x86/lapic/lapic_cpu_init.c
+++ b/src/cpu/x86/lapic/lapic_cpu_init.c
@@ -227,24 +227,19 @@ int start_cpu(device_t cpu)
}
/* C entry point of secondary cpus */
-
-// secondary_cpu_lock is used to serialize initialization of secondary CPUs
-// This can be used to avoid interleaved debugging messages.
-
-static spinlock_t secondary_cpu_lock = SPIN_LOCK_UNLOCKED;
-
void secondary_cpu_init(void)
{
atomic_inc(&active_cpus);
-
#if SERIAL_CPU_INIT == 1
- spin_lock(&secondary_cpu_lock);
+ #if CONFIG_MAX_CPUS>2
+ spin_lock(&start_cpu_lock);
+ #endif
#endif
-
cpu_initialize();
-
#if SERIAL_CPU_INIT == 1
- spin_unlock(&secondary_cpu_lock);
+ #if CONFIG_MAX_CPUS>2
+ spin_unlock(&start_cpu_lock);
+ #endif
#endif
atomic_dec(&active_cpus);
@@ -260,12 +255,15 @@ static void initialize_other_cpus(struct bus *cpu_bus)
if (cpu->path.type != DEVICE_PATH_APIC) {
continue;
}
+
if (!cpu->enabled) {
continue;
}
+
if (cpu->initialized) {
continue;
}
+
if (!start_cpu(cpu)) {
/* Record the error in cpu? */
printk_err("CPU %u would not start!\n",
diff --git a/src/devices/device.c b/src/devices/device.c
index 303a669d9f..4ca469b191 100644
--- a/src/devices/device.c
+++ b/src/devices/device.c
@@ -369,7 +369,6 @@ void compute_allocate_resource(
}
#if CONFIG_CONSOLE_VGA == 1
-
device_t vga_pri = 0;
static void allocate_vga_resource(void)
{
@@ -377,31 +376,52 @@ static void allocate_vga_resource(void)
#warning "This function knows to much about PCI stuff, it should be just a ietrator/visitor."
/* FIXME handle the VGA pallette snooping */
- struct device *dev, *vga, *vga_onboard;
+ struct device *dev, *vga, *vga_onboard, *vga_first, *vga_last;
struct bus *bus;
bus = 0;
vga = 0;
vga_onboard = 0;
+ vga_first = 0;
+ vga_last = 0;
for(dev = all_devices; dev; dev = dev->next) {
if (!dev->enabled) continue;
if (((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) &&
((dev->class >> 8) != PCI_CLASS_DISPLAY_OTHER))
{
- if (!vga) {
- if (dev->on_mainboard) {
- vga_onboard = dev;
- } else {
- vga = dev;
- }
- }
+ if (!vga_first) {
+ if (dev->on_mainboard) {
+ vga_onboard = dev;
+ } else {
+ vga_first = dev;
+ }
+ } else {
+ if (dev->on_mainboard) {
+ vga_onboard = dev;
+ } else {
+ vga_last = dev;
+ }
+ }
+
/* It isn't safe to enable other VGA cards */
dev->command &= ~(PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
}
}
- if (!vga) {
- vga = vga_onboard;
- }
+ vga = vga_last;
+
+ if(!vga) {
+ vga = vga_first;
+ }
+
+#if 1
+ if (vga_onboard) // will use on board vga as pri
+#else
+ if (!vga) // will use last add on adapter as pri
+#endif
+ {
+ vga = vga_onboard;
+ }
+
if (vga) {
/* vga is first add on card or the only onboard vga */
@@ -419,6 +439,7 @@ static void allocate_vga_resource(void)
bus = (bus == bus->dev->bus)? 0 : bus->dev->bus;
}
}
+
#endif
@@ -499,7 +520,6 @@ void enable_resources(struct device *dev)
*/
int reset_bus(struct bus *bus)
{
- device_t dev;
if (bus && bus->dev && bus->dev->ops && bus->dev->ops->reset_bus)
{
bus->dev->ops->reset_bus(bus);
diff --git a/src/devices/hypertransport.c b/src/devices/hypertransport.c
index a30c8f6a8d..fd347083df 100644
--- a/src/devices/hypertransport.c
+++ b/src/devices/hypertransport.c
@@ -1,3 +1,9 @@
+/*
+ 2005.11 yhlu add let the real sb to use small uintid
+
+*/
+
+
#include <bitops.h>
#include <console/console.h>
#include <device/device.h>
@@ -11,7 +17,7 @@
#define OPT_HT_LINK 0
#if OPT_HT_LINK == 1
-#include "../northbridge/amd/amdk8/cpu_rev.c"
+#include <cpu/amd/model_fxx_rev.h>
#endif
static device_t ht_scan_get_devs(device_t *old_devices)
@@ -71,12 +77,13 @@ static unsigned ht_read_freq_cap(device_t dev, unsigned pos)
}
/* AMD K8 Unsupported 1Ghz? */
if ((dev->vendor == PCI_VENDOR_ID_AMD) && (dev->device == 0x1100)) {
-#if K8_HT_FREQ_1G_SUPPORT == 1
- if (is_cpu_pre_e0())
-#endif
- {
+#if K8_HT_FREQ_1G_SUPPORT == 1
+ if (is_cpu_pre_e0()) { // only e0 later suupport 1GHz HT
freq_cap &= ~(1 << HT_FREQ_1000Mhz);
- }
+ }
+#else
+ freq_cap &= ~(1 << HT_FREQ_1000Mhz);
+#endif
}
return freq_cap;
@@ -248,7 +255,7 @@ static unsigned ht_lookup_slave_capability(struct device *dev)
return pos;
}
-static void ht_collapse_early_enumeration(struct bus *bus)
+static void ht_collapse_early_enumeration(struct bus *bus, unsigned offset_unitid)
{
unsigned int devfn;
struct ht_link prev;
@@ -275,6 +282,26 @@ static void ht_collapse_early_enumeration(struct bus *bus)
}
} while((ctrl & (1 << 5)) == 0);
+ //actually, only for one HT device HT chain, and unitid is 0
+#if HT_CHAIN_UNITID_BASE == 0
+ if(offset_unitid) {
+ return;
+ }
+#endif
+
+ /* Check if is already collapsed */
+ if((!offset_unitid)|| (offset_unitid && (!((HT_CHAIN_END_UNITID_BASE == 0) && (HT_CHAIN_END_UNITID_BASE <HT_CHAIN_UNITID_BASE))))) {
+ struct device dummy;
+ uint32_t id;
+ dummy.bus = bus;
+ dummy.path.type = DEVICE_PATH_PCI;
+ dummy.path.u.pci.devfn = PCI_DEVFN(0, 0);
+ id = pci_read_config32(&dummy, PCI_VENDOR_ID);
+ if ( ! ( (id == 0xffffffff) || (id == 0x00000000) ||
+ (id == 0x0000ffff) || (id == 0xffff0000) ) ) {
+ return;
+ }
+ }
/* Spin through the devices and collapse any early
* hypertransport enumeration.
@@ -309,15 +336,25 @@ static void ht_collapse_early_enumeration(struct bus *bus)
}
unsigned int hypertransport_scan_chain(struct bus *bus,
- unsigned min_devfn, unsigned max_devfn, unsigned int max)
+ unsigned min_devfn, unsigned max_devfn, unsigned int max, unsigned offset_unitid)
{
+ //even HT_CHAIN_UNITID_BASE == 0, we still can go through this function, because of end_of_chain check, also We need it to optimize link
unsigned next_unitid, last_unitid;
device_t old_devices, dev, func;
- unsigned min_unitid = 1;
+ unsigned min_unitid = (offset_unitid) ? HT_CHAIN_UNITID_BASE:1;
struct ht_link prev;
+ device_t last_func = 0;
+
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+ //let't record the device of last ht device, So we can set the Unitid to HT_CHAIN_END_UNITID_BASE
+ unsigned real_last_unitid;
+ uint8_t real_last_pos;
+ device_t real_last_dev;
+ int ht_dev_num = 0;
+#endif
/* Restore the hypertransport chain to it's unitialized state */
- ht_collapse_early_enumeration(bus);
+ ht_collapse_early_enumeration(bus, offset_unitid);
/* See which static device nodes I have */
old_devices = bus->children;
@@ -405,6 +442,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus,
func->path.u.pci.devfn += (next_unitid << 3);
static_count = (func->path.u.pci.devfn >> 3)
- (dev->path.u.pci.devfn >> 3) + 1;
+ last_func = func;
}
/* Compute the number of unitids consumed */
@@ -416,6 +454,14 @@ unsigned int hypertransport_scan_chain(struct bus *bus,
}
/* Update the Unitid of the next device */
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+ if(offset_unitid) {
+ real_last_unitid = next_unitid;
+ real_last_pos = pos;
+ real_last_dev = dev;
+ ht_dev_num++;
+ }
+#endif
next_unitid += count;
/* Setup the hypetransport link */
@@ -442,6 +488,26 @@ unsigned int hypertransport_scan_chain(struct bus *bus,
printk_debug("HyperT reset not needed\n");
}
#endif
+
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+ if(offset_unitid && (ht_dev_num>0)) {
+ uint16_t flags;
+ int i;
+ device_t last_func = 0;
+ flags = pci_read_config16(real_last_dev, real_last_pos + PCI_CAP_FLAGS);
+ flags &= ~0x1f;
+ flags |= HT_CHAIN_END_UNITID_BASE & 0x1f;
+ pci_write_config16(real_last_dev, real_last_pos + PCI_CAP_FLAGS, flags);
+
+ for(func = real_last_dev; func; func = func->sibling) {
+ func->path.u.pci.devfn -= ((real_last_unitid - HT_CHAIN_END_UNITID_BASE) << 3);
+ last_func = func;
+ }
+
+ next_unitid = real_last_unitid;
+ }
+#endif
+
if (next_unitid > 0x1f) {
next_unitid = 0x1f;
}
@@ -454,13 +520,15 @@ unsigned int hypertransport_scan_chain(struct bus *bus,
for(left = old_devices; left; left = left->sibling) {
printk_debug("%s\n", dev_path(left));
}
- die("Left over static devices. Check your Config.lb\n");
+ printk_err("HT: Left over static devices. Check your Config.lb\n");
+ if(last_func && !last_func->sibling) // put back the left over static device, and let pci_scan_bus disable it
+ last_func->sibling = old_devices;
}
-
+
/* Now that nothing is overlapping it is safe to scan the
* children.
*/
- max = pci_scan_bus(bus, 0x00, (next_unitid << 3)|7, max);
+ max = pci_scan_bus(bus, 0x00, (next_unitid << 3)|7, max);
return max;
}
diff --git a/src/devices/pci_device.c b/src/devices/pci_device.c
index f3f53f0688..a002d1cc35 100644
--- a/src/devices/pci_device.c
+++ b/src/devices/pci_device.c
@@ -1043,7 +1043,7 @@ unsigned int pci_scan_bus(struct bus *bus,
for(left = old_devices; left; left = left->sibling) {
printk_debug("%s\n", dev_path(left));
}
- die("Left over static devices. Check your Config.lb\n");
+ die("PCI: Left over static devices. Check your Config.lb\n");
}
/* For all children that implement scan_bus (i.e. bridges)
diff --git a/src/devices/pci_rom.c b/src/devices/pci_rom.c
index 64a85bb700..fbc6130bc3 100644
--- a/src/devices/pci_rom.c
+++ b/src/devices/pci_rom.c
@@ -22,14 +22,15 @@ struct rom_header * pci_rom_probe(struct device *dev)
}
printk_debug("rom address for %s = %x\n", dev_path(dev), rom_address);
+
+ if(!dev->on_mainboard) {
+ /* enable expansion ROM address decoding */
+ pci_write_config32(dev, PCI_ROM_ADDRESS,
+ rom_address|PCI_ROM_ADDRESS_ENABLE);
+ }
- /* enable expansion ROM address decoding */
- pci_write_config32(dev, PCI_ROM_ADDRESS,
- rom_address|PCI_ROM_ADDRESS_ENABLE);
-
- rom_header = (struct rom_header *) rom_address;
- printk_spew("PCI Expansion ROM, signature 0x%04x, \n\t"
- "INIT size 0x%04x, data ptr 0x%04x\n",
+ rom_header = (struct rom_header *)rom_address;
+ printk_spew("PCI Expansion ROM, signature 0x%04x, INIT size 0x%04x, data ptr 0x%04x\n",
le32_to_cpu(rom_header->signature),
rom_header->size * 512, le32_to_cpu(rom_header->data));
if (le32_to_cpu(rom_header->signature) != PCI_ROM_HDR) {
@@ -38,7 +39,7 @@ struct rom_header * pci_rom_probe(struct device *dev)
return NULL;
}
- rom_data = (struct pci_data *) ((unsigned char *) rom_header + le32_to_cpu(rom_header->data));
+ rom_data = (unsigned char *) rom_header + le32_to_cpu(rom_header->data);
printk_spew("PCI ROM Image, Vendor %04x, Device %04x,\n",
rom_data->vendor, rom_data->device);
if (dev->vendor != rom_data->vendor || dev->device != rom_data->device) {
@@ -51,7 +52,7 @@ struct rom_header * pci_rom_probe(struct device *dev)
rom_data->class_hi, rom_data->class_lo,
rom_data->type);
if (dev->class != ((rom_data->class_hi << 8) | rom_data->class_lo)) {
- printk_err("Class Code mismatch ROM %08x, dev %08x\n",
+ printk_debug("Class Code mismatch ROM %08x, dev %08x\n",
(rom_data->class_hi << 8) | rom_data->class_lo, dev->class);
//return NULL;
}
@@ -59,12 +60,14 @@ struct rom_header * pci_rom_probe(struct device *dev)
return rom_header;
}
-static void *pci_ram_image_start = PCI_RAM_IMAGE_START;
+static void *pci_ram_image_start = (void *)PCI_RAM_IMAGE_START;
#if CONFIG_CONSOLE_VGA == 1
-int vga_inited = 0; // used by vga_console.c
+extern int vga_inited; // defined in vga_console.c
+#if CONFIG_CONSOLE_VGA_MULTI == 0
extern device_t vga_pri; // the primary vga device, defined in device.c
#endif
+#endif
struct rom_header *pci_rom_load(struct device *dev, struct rom_header *rom_header)
{
@@ -76,8 +79,8 @@ struct rom_header *pci_rom_load(struct device *dev, struct rom_header *rom_heade
rom_address = pci_read_config32(dev, PCI_ROM_ADDRESS);
do {
- rom_header = (struct rom_header *) ((unsigned char *) rom_header + image_size); // get next image
- rom_data = (struct pci_data *) ((unsigned char *) rom_header + le32_to_cpu(rom_header->data));
+ rom_header = (unsigned char *) rom_header + image_size; // get next image
+ rom_data = (unsigned char *) rom_header + le32_to_cpu(rom_header->data);
image_size = le32_to_cpu(rom_data->ilen) * 512;
} while ((rom_data->type!=0) && (rom_data->indicator!=0)); // make sure we got x86 version
@@ -87,7 +90,9 @@ struct rom_header *pci_rom_load(struct device *dev, struct rom_header *rom_heade
if (PCI_CLASS_DISPLAY_VGA == rom_data->class_hi) {
#if CONFIG_CONSOLE_VGA == 1
+ #if CONFIG_CONSOLE_VGA_MULTI == 0
if (dev != vga_pri) return NULL; // only one VGA supported
+ #endif
printk_debug("copying VGA ROM Image from %x to %x, %x bytes\n",
rom_header, PCI_VGA_RAM_IMAGE_START, rom_size);
memcpy(PCI_VGA_RAM_IMAGE_START, rom_header, rom_size);
@@ -95,11 +100,11 @@ struct rom_header *pci_rom_load(struct device *dev, struct rom_header *rom_heade
return (struct rom_header *) (PCI_VGA_RAM_IMAGE_START);
#endif
} else {
- printk_spew("%s, copying non-VGA ROM Image from %x to %x, %x bytes\n",
- __func__, rom_header, pci_ram_image_start, rom_size);
+ printk_debug("copying non-VGA ROM Image from %x to %x, %x bytes\n",
+ rom_header, pci_ram_image_start, rom_size);
memcpy(pci_ram_image_start, rom_header, rom_size);
pci_ram_image_start += rom_size;
- return (struct rom_header *) pci_ram_image_start;
+ return (struct rom_header *) (pci_ram_image_start-rom_size);
}
/* disable expansion ROM address decoding */
pci_write_config32(dev, PCI_ROM_ADDRESS, rom_address & ~PCI_ROM_ADDRESS_ENABLE);
diff --git a/src/include/cpu/amd/dualcore.h b/src/include/cpu/amd/dualcore.h
index a38565b01f..fb53c92909 100644
--- a/src/include/cpu/amd/dualcore.h
+++ b/src/include/cpu/amd/dualcore.h
@@ -1,14 +1,24 @@
#ifndef CPU_AMD_DUALCORE_H
#define CPU_AMD_DUALCORE_H
-struct device;
+#if defined(__GNUC__)
+unsigned int read_nb_cfg_54(void);
+#endif
struct node_core_id {
unsigned nodeid;
unsigned coreid;
};
-void amd_sibling_init(struct device *cpu, struct node_core_id id);
-struct node_core_id get_node_core_id(void);
+#if defined(__GNUC__)
+// it can be used to get unitid and coreid it running only
+struct node_core_id get_node_core_id(unsigned int nb_cfg_54);
+#endif
+
+#ifndef __ROMCC__
+struct device;
+unsigned get_apicid_base(unsigned ioapic_num);
+void amd_sibling_init(struct device *cpu);
+#endif
#endif /* CPU_AMD_DUALCORE_H */
diff --git a/src/include/cpu/x86/lapic.h b/src/include/cpu/x86/lapic.h
index 12ca518f66..5d696dce18 100644
--- a/src/include/cpu/x86/lapic.h
+++ b/src/include/cpu/x86/lapic.h
@@ -10,17 +10,17 @@
# define NEED_LAPIC 1
#endif
-static inline unsigned long lapic_read(unsigned long reg)
+static inline __attribute__((always_inline)) unsigned long lapic_read(unsigned long reg)
{
return *((volatile unsigned long *)(LAPIC_DEFAULT_BASE+reg));
}
-static inline void lapic_write(unsigned long reg, unsigned long v)
+static inline __attribute__((always_inline)) void lapic_write(unsigned long reg, unsigned long v)
{
*((volatile unsigned long *)(LAPIC_DEFAULT_BASE+reg)) = v;
}
-static inline void lapic_wait_icr_idle(void)
+static inline __attribute__((always_inline)) void lapic_wait_icr_idle(void)
{
do { } while ( lapic_read( LAPIC_ICR ) & LAPIC_ICR_BUSY );
}
@@ -46,13 +46,14 @@ static inline void disable_lapic(void)
wrmsr(LAPIC_BASE_MSR, msr);
}
-static inline unsigned long lapicid(void)
+static inline __attribute__((always_inline)) unsigned long lapicid(void)
{
return lapic_read(LAPIC_ID) >> 24;
}
-static inline void stop_this_cpu(void)
+static inline __attribute__((always_inline)) void stop_this_cpu(void)
{
+
unsigned apicid;
apicid = lapicid();
diff --git a/src/include/device/hypertransport.h b/src/include/device/hypertransport.h
index f04d0eca30..8eba981745 100644
--- a/src/include/device/hypertransport.h
+++ b/src/include/device/hypertransport.h
@@ -4,7 +4,7 @@
#include <device/hypertransport_def.h>
unsigned int hypertransport_scan_chain(struct bus *bus,
- unsigned min_devfn, unsigned max_devfn, unsigned int max);
+ unsigned min_devfn, unsigned max_devfn, unsigned int max, unsigned offset_unitid);
unsigned int ht_scan_bridge(struct device *dev, unsigned int max);
extern struct device_operations default_ht_ops_bus;
diff --git a/src/include/device/pci_ids.h b/src/include/device/pci_ids.h
index 373b73c2ee..d219b96fe1 100644
--- a/src/include/device/pci_ids.h
+++ b/src/include/device/pci_ids.h
@@ -438,6 +438,9 @@
#define PCI_DEVICE_ID_AMD_8131_PCIX 0x7450
#define PCI_DEVICE_ID_AMD_8131_IOAPIC 0x7451
+#define PCI_DEVICE_ID_AMD_8132_PCIX 0x7458
+#define PCI_DEVICE_ID_AMD_8132_IOAPIC 0x7459
+
#define PCI_VENDOR_ID_TRIDENT 0x1023
#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000
#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 0x2001
@@ -910,6 +913,20 @@
#define PCI_DEVICE_ID_CERN_HIPPI_DST 0x0021
#define PCI_DEVICE_ID_CERN_HIPPI_SRC 0x0022
+#define PCI_DEVICE_ID_NVIDIA_CK8S_HT 0x00e1
+#define PCI_DEVICE_ID_NVIDIA_CK8S_LPC 0x00e0
+#define PCI_DEVICE_ID_NVIDIA_CK8S_SM 0x00e4
+#define PCI_DEVICE_ID_NVIDIA_CK8S_USB 0x00e7
+#define PCI_DEVICE_ID_NVIDIA_CK8S_USB2 0x00e8
+#define PCI_DEVICE_ID_NVIDIA_CK8S_NIC 0x00e6
+#define PCI_DEVICE_ID_NVIDIA_CK8S_ACI 0x00ea
+#define PCI_DEVICE_ID_NVIDIA_CK8S_MCI 0x00e9
+#define PCI_DEVICE_ID_NVIDIA_CK8S_IDE 0x00e5
+#define PCI_DEVICE_ID_NVIDIA_CK8S_SATA0 0x00ee
+#define PCI_DEVICE_ID_NVIDIA_CK8S_SATA1 0x00e3
+#define PCI_DEVICE_ID_NVIDIA_CK8S_PCI 0x00ed
+#define PCI_DEVICE_ID_NVIDIA_CK8S_PCI_AGP 0x00e2
+
#define PCI_VENDOR_ID_NVIDIA 0x10de
#define PCI_DEVICE_ID_NVIDIA_TNT 0x0020
#define PCI_DEVICE_ID_NVIDIA_TNT2 0x0028
@@ -1060,8 +1077,8 @@
#define PCI_DEVICE_ID_VIA_8233C_0 0x3109
#define PCI_DEVICE_ID_VIA_8361 0x3112
#define PCI_DEVICE_ID_VIA_8233A 0x3147
-#define PCI_DEVICE_ID_VIA_CLE266_VGA 0x3122
-#define PCI_DEVICE_ID_VIA_8623 0x3123
+#define PCI_DEVICE_ID_VIA_CLE266_VGA 0x3122
+#define PCI_DEVICE_ID_VIA_8623 0x3123
#define PCI_DEVICE_ID_VIA_86C100A 0x6100
#define PCI_DEVICE_ID_VIA_8231 0x8231
#define PCI_DEVICE_ID_VIA_8231_4 0x8235
@@ -1207,6 +1224,21 @@
#define PCI_DEVICE_ID_SERVERWORKS_GCLE2 0x0227
#define PCI_DEVICE_ID_SERVERWORKS_CSB5ISA 0x0230
+#define PCI_DEVICE_ID_SERVERWORKS_BCM5780_PXB 0x0130
+#define PCI_DEVICE_ID_SERVERWORKS_BCM5780_PCIE 0x0132
+#define PCI_DEVICE_ID_BROADCOM_BCM5780_NIC 0x1668
+#define PCI_DEVICE_ID_BROADCOM_BCM5780_NIC1 0x1669
+
+#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_HT_PXB 0x0036
+#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_PXBX 0x0104
+#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_SATA 0x024a
+#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_SB_PCI_MAIN 0x0205
+#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_IDE 0x0214
+#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_LPC 0x0234
+#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_WDT 0x0238
+#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_XIOAPIC 0x0235
+#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_USB 0x0223
+
#define PCI_VENDOR_ID_SBE 0x1176
#define PCI_DEVICE_ID_SBE_WANXL100 0x0301
#define PCI_DEVICE_ID_SBE_WANXL200 0x0302
@@ -1763,7 +1795,6 @@
#define PCI_DEVICE_ID_INTEL_82801CA_1F3 0x2483
#define PCI_DEVICE_ID_INTEL_82801CA_1D1 0x2484
#define PCI_DEVICE_ID_INTEL_82801CA_1F5 0x2485
-#define PCI_DEVICE_ID_INTEL_82801CA_1F6 0x2486
#define PCI_DEVICE_ID_INTEL_82801CA_1D2 0x2487
#define PCI_DEVICE_ID_INTEL_82870_1E0 0x1461
#define PCI_DEVICE_ID_INTEL_82870_1F0 0x1460
@@ -1793,17 +1824,15 @@
#define PCI_DEVICE_ID_INTEL_82801E_11 0x245b
#define PCI_DEVICE_ID_INTEL_82801E_13 0x245d
#define PCI_DEVICE_ID_INTEL_82801E_14 0x245e
-#define PCI_DEVICE_ID_INTEL_82801CA_LAN 0x2449
-#define PCI_DEVICE_ID_INTEL_82801CA_PCI 0x244e // Same as 82801ER
-#define PCI_DEVICE_ID_INTEL_82801CA_LPC 0x2480
-#define PCI_DEVICE_ID_INTEL_82801CA_USB 0x2482
-#define PCI_DEVICE_ID_INTEL_82801CA_SMB 0x2483
-#define PCI_DEVICE_ID_INTEL_82801CA_USB2 0x2484
-#define PCI_DEVICE_ID_INTEL_82801CA_AC97_AUDIO 0x2485
-#define PCI_DEVICE_ID_INTEL_82801CA_AC97_MODEM 0x2486
-#define PCI_DEVICE_ID_INTEL_82801CA_USB3 0x2487
+#define PCI_DEVICE_ID_INTEL_82801CA_0 0x2480
+#define PCI_DEVICE_ID_INTEL_82801CA_2 0x2482
+#define PCI_DEVICE_ID_INTEL_82801CA_3 0x2483
+#define PCI_DEVICE_ID_INTEL_82801CA_4 0x2484
+#define PCI_DEVICE_ID_INTEL_82801CA_5 0x2485
+#define PCI_DEVICE_ID_INTEL_82801CA_6 0x2486
+#define PCI_DEVICE_ID_INTEL_82801CA_7 0x2487
#define PCI_DEVICE_ID_INTEL_82801CA_10 0x248a
-#define PCI_DEVICE_ID_INTEL_82801CA_IDE 0x248b
+#define PCI_DEVICE_ID_INTEL_82801CA_11 0x248b
#define PCI_DEVICE_ID_INTEL_82801CA_12 0x248c
#define PCI_DEVICE_ID_INTEL_82801DB_0 0x24c0
#define PCI_DEVICE_ID_INTEL_82801DB_2 0x24c2
diff --git a/src/northbridge/amd/amdk8/amdk8.h b/src/northbridge/amd/amdk8/amdk8.h
index 89c03fc16b..7e064af974 100644
--- a/src/northbridge/amd/amdk8/amdk8.h
+++ b/src/northbridge/amd/amdk8/amdk8.h
@@ -1,3 +1,7 @@
+#ifndef AMDK8_H
+
+#define AMDK8_H
+
/* Definitions of various K8 registers */
/* Function 0 */
#define HT_TRANSACTION_CONTROL 0x68
@@ -226,3 +230,5 @@
#define InitComplete (1 << 1)
#define NonCoherent (1 << 2)
#define ConnectionPending (1 << 4)
+
+#endif
diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c
index 36d2dcded5..7d43f3c97d 100644
--- a/src/northbridge/amd/amdk8/coherent_ht.c
+++ b/src/northbridge/amd/amdk8/coherent_ht.c
@@ -1812,9 +1812,9 @@ static int setup_coherent_ht_domain(void)
#if CONFIG_MAX_PHYSICAL_CPUS > 1
result = setup_smp();
-#endif
result.nodes = verify_mp_capabilities(result.nodes);
clear_dead_routes(result.nodes);
+#endif
if (result.nodes == 1) {
setup_uniprocessor();
}
diff --git a/src/northbridge/amd/amdk8/debug.c b/src/northbridge/amd/amdk8/debug.c
index d0841e878e..ca45cbe519 100644
--- a/src/northbridge/amd/amdk8/debug.c
+++ b/src/northbridge/amd/amdk8/debug.c
@@ -2,6 +2,18 @@
* generic K8 debug code, used by mainboard specific auto.c
*
*/
+
+static inline void print_debug_addr(const char *str, void *val)
+{
+#if CACHE_AS_RAM_ADDRESS_DEBUG == 1
+ #if CONFIG_USE_INIT==1
+ printk_debug("------Address debug: %s%x------\r\n", str, val);
+ #else
+ print_debug ("------Address debug: "); print_debug(str); print_debug_hex32(val); print_debug("------\r\n");
+ #endif
+#endif
+}
+
#if 1
static void print_debug_pci_dev(unsigned dev)
{
@@ -34,6 +46,7 @@ static void print_pci_devices(void)
#if CONFIG_USE_INIT
printk_debug(" %04x:%04x\r\n", (id & 0xffff), (id>>16));
#else
+ print_debug(" ");
print_debug_hex32(id);
print_debug("\r\n");
#endif
diff --git a/src/northbridge/amd/amdk8/early_ht.c b/src/northbridge/amd/amdk8/early_ht.c
index 2711657455..5134494943 100644
--- a/src/northbridge/amd/amdk8/early_ht.c
+++ b/src/northbridge/amd/amdk8/early_ht.c
@@ -1,14 +1,26 @@
-static int enumerate_ht_chain(void)
+/*
+ 2005.11 yhlu add let the real sb to use small unitid
+*/
+// only for sb ht chain
+static void enumerate_ht_chain(void)
{
+#if HT_CHAIN_UNITID_BASE != 0
+/* HT_CHAIN_UNITID_BASE could be 0 (only one ht device in the ht chain), if so, don't need to go through the chain */
+
/* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
* On most boards this just happens. If a cpu has multiple
* non Coherent links the appropriate bus registers for the
* links needs to be programed to point at bus 0.
*/
unsigned next_unitid, last_unitid;
- int reset_needed = 0;
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+ //let't record the device of last ht device, So we can set the Unitid to HT_CHAIN_END_UNITID_BASE
+ unsigned real_last_unitid;
+ uint8_t real_last_pos;
+ int ht_dev_num = 0; // except host_bridge
+#endif
- next_unitid = 1;
+ next_unitid = HT_CHAIN_UNITID_BASE;
do {
uint32_t id;
uint8_t hdr_type, pos;
@@ -58,6 +70,11 @@ static int enumerate_ht_chain(void)
flags &= ~0x1f;
flags |= next_unitid & 0x1f;
count = (flags >> 5) & 0x1f;
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+ real_last_unitid = next_unitid;
+ real_last_pos = pos;
+ ht_dev_num++ ;
+#endif
next_unitid += count;
/* Test for end of chain */
@@ -78,7 +95,17 @@ static int enumerate_ht_chain(void)
pos = pci_read_config8(PCI_DEV(0, 0, 0), pos + PCI_CAP_LIST_NEXT);
}
} while((last_unitid != next_unitid) && (next_unitid <= 0x1f));
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+ if(ht_dev_num>0) {
+ uint16_t flags;
+ flags = pci_read_config16(PCI_DEV(0,real_last_unitid,0), real_last_pos + PCI_CAP_FLAGS);
+ flags &= ~0x1f;
+ flags |= HT_CHAIN_END_UNITID_BASE & 0x1f;
+ pci_write_config16(PCI_DEV(0, real_last_unitid, 0), real_last_pos + PCI_CAP_FLAGS, flags);
+ }
+#endif
+
+#endif
- return reset_needed;
}
diff --git a/src/northbridge/amd/amdk8/incoherent_ht.c b/src/northbridge/amd/amdk8/incoherent_ht.c
index bdb2676e39..02a0c2dccd 100644
--- a/src/northbridge/amd/amdk8/incoherent_ht.c
+++ b/src/northbridge/amd/amdk8/incoherent_ht.c
@@ -1,17 +1,12 @@
/*
This should be done by Eric
2004.12 yhlu add multi ht chain dynamically support
-
+ 2005.11 yhlu add let real sb to use small unitid
*/
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include <device/hypertransport_def.h>
-
-/* We can reduce the size of code generated by romcc by
- * changing all of the fixed size types that live in registers
- * into simple unsigned variables. (ie s/uint8_t/unsigned/g)
- */
#ifndef K8_HT_FREQ_1G_SUPPORT
#define K8_HT_FREQ_1G_SUPPORT 0
#endif
@@ -20,15 +15,22 @@
#define K8_SCAN_PCI_BUS 0
#endif
+#ifndef K8_ALLOCATE_IO_RANGE
+ #define K8_ALLOCATE_IO_RANGE 0
+#endif
+
+// Do we need allocate MMIO? Current We direct last 64M to sblink only, We can not lose access to last 4M range to ROM
+#ifndef K8_ALLOCATE_MMIO_RANGE
+ #define K8_ALLOCATE_MMIO_RANGE 0
+#endif
+
static inline void print_linkn_in (const char *strval, uint8_t byteval)
{
-#if 1
#if CONFIG_USE_INIT
printk_debug("%s%02x\r\n", strval, byteval);
#else
print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n");
#endif
-#endif
}
static uint8_t ht_lookup_capability(device_t dev, uint16_t val)
@@ -74,18 +76,27 @@ static uint8_t ht_lookup_host_capability(device_t dev)
return ht_lookup_capability(dev, 1); // Host/Secondary Interface Block Format
}
-static void ht_collapse_previous_enumeration(uint8_t bus)
+static void ht_collapse_previous_enumeration(uint8_t bus, unsigned offset_unitid)
{
device_t dev;
uint32_t id;
+ //actually, only for one HT device HT chain, and unitid is 0
+#if HT_CHAIN_UNITID_BASE == 0
+ if(offset_unitid) {
+ return;
+ }
+#endif
+
/* Check if is already collapsed */
- dev = PCI_DEV(bus, 0, 0);
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if ( ! ( (id == 0xffffffff) || (id == 0x00000000) ||
- (id == 0x0000ffff) || (id == 0xffff0000) ) ) {
- return;
- }
+ if((!offset_unitid) || (offset_unitid && (!((HT_CHAIN_END_UNITID_BASE == 0) && (HT_CHAIN_END_UNITID_BASE <HT_CHAIN_UNITID_BASE))))) {
+ dev = PCI_DEV(bus, 0, 0);
+ id = pci_read_config32(dev, PCI_VENDOR_ID);
+ if ( ! ( (id == 0xffffffff) || (id == 0x00000000) ||
+ (id == 0x0000ffff) || (id == 0xffff0000) ) ) {
+ return;
+ }
+ }
/* Spin through the devices and collapse any previous
* hypertransport enumeration.
@@ -136,21 +147,24 @@ static uint16_t ht_read_freq_cap(device_t dev, uint8_t pos)
/* AMD 8131 Errata 48 */
if (id == (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_AMD_8131_PCIX << 16))) {
freq_cap &= ~(1 << HT_FREQ_800Mhz);
- }
+ return freq_cap;
+ }
/* AMD 8151 Errata 23 */
if (id == (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_AMD_8151_SYSCTRL << 16))) {
freq_cap &= ~(1 << HT_FREQ_800Mhz);
+ return freq_cap;
}
/* AMD K8 Unsupported 1Ghz? */
if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) {
-#if K8_HT_FREQ_1G_SUPPORT == 1
- /* Supported starting with E0 */
- device_t dev_2 = PCI_DEV(0,0x18,2);
- if(pci_read_config32(dev_2,0x9c) < 0x20f00)
-#endif
+ #if K8_HT_FREQ_1G_SUPPORT == 1
+ if (is_cpu_pre_e0()) { // only E0 later support 1GHz
freq_cap &= ~(1 << HT_FREQ_1000Mhz);
+ }
+ #else
+ freq_cap &= ~(1 << HT_FREQ_1000Mhz);
+ #endif
}
return freq_cap;
@@ -236,6 +250,7 @@ static int ht_optimize_link(
/* See if I am changing dev1's width */
old_width = pci_read_config8(dev1, pos1 + LINK_WIDTH(offs1) + 1);
+ old_width &= 0x77;
needs_reset |= old_width != width;
/* Set dev1's widths */
@@ -246,6 +261,7 @@ static int ht_optimize_link(
/* See if I am changing dev2's width */
old_width = pci_read_config8(dev2, pos2 + LINK_WIDTH(offs2) + 1);
+ old_width &= 0x77;
needs_reset |= old_width != width;
/* Set dev2's widths */
@@ -254,8 +270,14 @@ static int ht_optimize_link(
return needs_reset;
}
#if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
-static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus);
-static int scan_pci_bus( unsigned bus)
+
+#if RAMINIT_SYSINFO == 1
+static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid, struct sys_info *sysinfo);
+static int scan_pci_bus( unsigned bus , struct sys_info *sysinfo)
+#else
+static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid);
+static int scan_pci_bus( unsigned bus)
+#endif
{
/*
here we already can access PCI_DEV(bus, 0, 0) to PCI_DEV(bus, 0x1f, 0x7)
@@ -324,24 +346,30 @@ static int scan_pci_bus( unsigned bus)
((unsigned int) max_bus << 16));
pci_write_config32(dev, PCI_PRIMARY_BUS, buses);
- {
/* here we need to figure out if dev is a ht bridge
if it is ht bridge, we need to call ht_setup_chainx at first
Not verified --- yhlu
*/
- uint8_t upos;
- upos = ht_lookup_host_capability(dev); // one func one ht sub
- if (upos) { // sub ht chain
- uint8_t busn;
- busn = (new_bus & 0xff);
- /* Make certain the HT bus is not enumerated */
- ht_collapse_previous_enumeration(busn);
- /* scan the ht chain */
- new_bus |= (ht_setup_chainx(dev,upos,busn)<<16); // store reset_needed to upword
- }
- }
+ uint8_t upos;
+ upos = ht_lookup_host_capability(dev); // one func one ht sub
+ if (upos) { // sub ht chain
+ uint8_t busn;
+ busn = (new_bus & 0xff);
+ /* Make certain the HT bus is not enumerated */
+ ht_collapse_previous_enumeration(busn, 0);
+ /* scan the ht chain */
+ #if RAMINIT_SYSINFO == 1
+ ht_setup_chainx(dev,upos,busn, 0, sysinfo); // don't need offset unitid
+ #else
+ new_bus |= (ht_setup_chainx(dev, upos, busn, 0)<<16); // store reset_needed to upword
+ #endif
+ }
+ #if RAMINIT_SYSINFO == 1
+ new_bus = scan_pci_bus(new_bus, sysinfo);
+ #else
new_bus = scan_pci_bus(new_bus);
+ #endif
/* set real max bus num in that */
buses = (buses & 0xff00ffff) |
@@ -370,14 +398,31 @@ static int scan_pci_bus( unsigned bus)
return new_bus;
}
#endif
-static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus)
+
+#if RAMINIT_SYSINFO == 1
+static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid, struct sys_info *sysinfo)
+#else
+static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid)
+#endif
{
+ //even HT_CHAIN_UNITID_BASE == 0, we still can go through this function, because of end_of_chain check, also We need it to optimize link
+
uint8_t next_unitid, last_unitid;
unsigned uoffs;
- int reset_needed=0;
+
+#if RAMINIT_SYSINFO == 0
+ int reset_needed = 0;
+#endif
+
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+ //let't record the device of last ht device, So we can set the Unitid to HT_CHAIN_END_UNITID_BASE
+ unsigned real_last_unitid;
+ uint8_t real_last_pos;
+ int ht_dev_num = 0;
+#endif
uoffs = PCI_HT_HOST_OFFS;
- next_unitid = 1;
+ next_unitid = (offset_unitid) ? HT_CHAIN_UNITID_BASE:1;
do {
uint32_t id;
@@ -391,11 +436,24 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus)
ctrl = pci_read_config16(udev, upos + LINK_CTRL(uoffs));
/* Is this the end of the hypertransport chain? */
if (ctrl & (1 << 6)) {
- break;
+ goto end_of_chain;
}
- /* Has the link failed */
- if (ctrl & (1 << 4)) {
- break;
+
+ if (ctrl & ((1 << 4) | (1 << 8))) {
+ /*
+ * Either the link has failed, or we have
+ * a CRC error.
+ * Sometimes this can happen due to link
+ * retrain, so lets knock it down and see
+ * if its transient
+ */
+ ctrl |= ((1 << 6) | (1 <<8)); // Link fail + Crc
+ pci_write_config16(udev, upos + LINK_CTRL(uoffs), ctrl);
+ ctrl = pci_read_config16(udev, upos + LINK_CTRL(uoffs));
+ if (ctrl & ((1 << 4) | (1 << 8))) {
+ print_err("Detected error on Hypertransport Link\n");
+ break;
+ }
}
} while((ctrl & (1 << 5)) == 0);
@@ -413,7 +471,10 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus)
pos = ht_lookup_slave_capability(dev);
if (!pos) {
- print_err("HT link capability not found\r\n");
+ print_err("udev="); print_err_hex32(udev);
+ print_err("\tupos="); print_err_hex32(upos);
+ print_err("\tuoffs="); print_err_hex32(uoffs);
+ print_err("\tHT link capability not found\r\n");
break;
}
@@ -441,6 +502,14 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus)
/* Compute the number of unitids consumed */
count = (flags >> 5) & 0x1f;
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+ if(offset_unitid) {
+ real_last_unitid = next_unitid;
+ real_last_pos = pos;
+ ht_dev_num++;
+ }
+#endif
+
next_unitid += count;
/* Find which side of the ht link we are on,
@@ -449,9 +518,22 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus)
*/
flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS);
offs = ((flags>>10) & 1) ? PCI_HT_SLAVE1_OFFS : PCI_HT_SLAVE0_OFFS;
-
- /* Setup the Hypertransport link */
- reset_needed |= ht_optimize_link(udev, upos, uoffs, dev, pos, offs);
+
+ #if RAMINIT_SYSINFO == 1
+ /* store the link pair here and we will Setup the Hypertransport link later, after we get final FID/VID */
+ {
+ struct link_pair_st *link_pair = &sysinfo->link_pair[sysinfo->link_pair_num];
+ link_pair->udev = udev;
+ link_pair->upos = upos;
+ link_pair->uoffs = uoffs;
+ link_pair->dev = dev;
+ link_pair->pos = pos;
+ link_pair->offs = offs;
+ sysinfo->link_pair_num++;
+ }
+ #else
+ reset_needed |= ht_optimize_link(udev, upos, uoffs, dev, pos, offs);
+ #endif
#if CK804_DEVN_BASE==0
if(id == 0x005e10de) {
@@ -466,11 +548,52 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus)
} while((last_unitid != next_unitid) && (next_unitid <= 0x1f));
+end_of_chain: ;
+
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+ if(offset_unitid && (ht_dev_num>0) ) {
+ uint16_t flags;
+ int i;
+ flags = pci_read_config16(PCI_DEV(bus,real_last_unitid,0), real_last_pos + PCI_CAP_FLAGS);
+ flags &= ~0x1f;
+ flags |= HT_CHAIN_END_UNITID_BASE & 0x1f;
+ pci_write_config16(PCI_DEV(bus, real_last_unitid, 0), real_last_pos + PCI_CAP_FLAGS, flags);
+
+ #if RAMINIT_SYSINFO == 1
+ // Here need to change the dev in the array
+ for(i=0;i<sysinfo->link_pair_num;i++)
+ {
+ struct link_pair_st *link_pair = &sysinfo->link_pair[i];
+ if(link_pair->udev == PCI_DEV(bus, real_last_unitid, 0)) {
+ link_pair->udev = PCI_DEV(bus, HT_CHAIN_END_UNITID_BASE, 0);
+ continue;
+ }
+ if(link_pair->dev == PCI_DEV(bus, real_last_unitid, 0)) {
+ link_pair->dev = PCI_DEV(bus, HT_CHAIN_END_UNITID_BASE, 0);
+ }
+ }
+ #endif
+
+ }
+#endif
+
+#if RAMINIT_SYSINFO == 0
return reset_needed;
+#endif
+
}
+#if RAMINIT_SYSINFO == 1
+static void ht_setup_chain(device_t udev, unsigned upos, struct sys_info *sysinfo)
+#else
static int ht_setup_chain(device_t udev, unsigned upos)
+#endif
{
+ unsigned offset_unitid = 0;
+#if HT_CHAIN_UNITID_BASE != 1
+ offset_unitid = 1;
+#endif
+
/* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
* On most boards this just happens. If a cpu has multiple
* non Coherent links the appropriate bus registers for the
@@ -478,9 +601,17 @@ static int ht_setup_chain(device_t udev, unsigned upos)
*/
/* Make certain the HT bus is not enumerated */
- ht_collapse_previous_enumeration(0);
+ ht_collapse_previous_enumeration(0, 0);
- return ht_setup_chainx(udev, upos, 0);
+#if HT_CHAIN_UNITID_BASE != 1
+ offset_unitid = 1;
+#endif
+
+#if RAMINIT_SYSINFO == 1
+ ht_setup_chainx(udev, upos, 0, offset_unitid, sysinfo);
+#else
+ return ht_setup_chainx(udev, upos, 0, offset_unitid);
+#endif
}
static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, uint8_t linkt, uint8_t val)
{
@@ -506,7 +637,7 @@ static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, uint8_t linkt
return 0;
}
-static int optimize_link_in_coherent(uint8_t ht_c_num)
+static int optimize_link_read_pointers_chain(uint8_t ht_c_num)
{
int reset_needed;
uint8_t i;
@@ -541,20 +672,28 @@ static int optimize_link_in_coherent(uint8_t ht_c_num)
return reset_needed;
}
+#if RAMINIT_SYSINFO == 1
+static void ht_setup_chains(uint8_t ht_c_num, struct sys_info *sysinfo)
+#else
static int ht_setup_chains(uint8_t ht_c_num)
+#endif
{
/* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
* On most boards this just happens. If a cpu has multiple
* non Coherent links the appropriate bus registers for the
* links needs to be programed to point at bus 0.
*/
- int reset_needed;
uint8_t upos;
device_t udev;
uint8_t i;
- reset_needed = 0;
+#if RAMINIT_SYSINFO == 0
+ int reset_needed = 0;
+#else
+ sysinfo->link_pair_num = 0;
+#endif
+ // first one is SB Chain
for (i = 0; i < ht_c_num; i++) {
uint32_t reg;
uint8_t devpos;
@@ -564,6 +703,7 @@ static int ht_setup_chains(uint8_t ht_c_num)
#if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
unsigned bus;
#endif
+ unsigned offset_unitid = 0;
reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4);
@@ -576,32 +716,57 @@ static int ht_setup_chains(uint8_t ht_c_num)
dword &= ~(0xffff<<8);
dword |= (reg & 0xffff0000)>>8;
pci_write_config32( PCI_DEV(0, devpos,0), regpos , dword);
-
+
+
+ #if HT_CHAIN_UNITID_BASE != 1
+ #if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
+ if(i==0) // to check if it is sb ht chain
+ #endif
+ offset_unitid = 1;
+ #endif
+
/* Make certain the HT bus is not enumerated */
- ht_collapse_previous_enumeration(busn);
+ ht_collapse_previous_enumeration(busn, offset_unitid);
upos = ((reg & 0xf00)>>8) * 0x20 + 0x80;
udev = PCI_DEV(0, devpos, 0);
-
- reset_needed |= ht_setup_chainx(udev,upos,busn);
+
+#if RAMINIT_SYSINFO == 1
+ ht_setup_chainx(udev,upos,busn, offset_unitid, sysinfo); // all not
+#else
+ reset_needed |= ht_setup_chainx(udev,upos,busn, offset_unitid); //all not
+#endif
#if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
/* You can use use this in romcc, because there is function call in romcc, recursive will kill you */
bus = busn; // we need 32 bit
- reset_needed |= (scan_pci_bus(bus)>>16); // take out reset_needed that stored in upword
+#if RAMINIT_SYSINFO == 1
+ scan_pci_bus(bus, sysinfo);
+#else
+ reset_needed |= (scan_pci_bus(bus)>>16); // take out reset_needed that stored in upword
+#endif
#endif
}
- reset_needed |= optimize_link_in_coherent(ht_c_num);
-
+#if RAMINIT_SYSINFO == 0
+ reset_needed |= optimize_link_read_pointers_chain(ht_c_num);
+
return reset_needed;
+#endif
+
}
-#ifndef K8_ALLOCATE_IO_RANGE
- #define K8_ALLOCATE_IO_RANGE 0
-#endif
+static inline unsigned get_nodes(void)
+{
+ return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1;
+}
+
+#if RAMINIT_SYSINFO == 1
+static void ht_setup_chains_x(struct sys_info *sysinfo)
+#else
static int ht_setup_chains_x(void)
+#endif
{
uint8_t nodeid;
uint32_t reg;
@@ -612,11 +777,18 @@ static int ht_setup_chains_x(void)
#if K8_ALLOCATE_IO_RANGE == 1
unsigned next_io_base;
#endif
-
+
+ nodes = get_nodes();
+
/* read PCI_DEV(0,0x18,0) 0x64 bit [8:9] to find out SbLink m */
reg = pci_read_config32(PCI_DEV(0, 0x18, 0), 0x64);
/* update PCI_DEV(0, 0x18, 1) 0xe0 to 0x05000m03, and next_busn=0x3f+1 */
print_linkn_in("SBLink=", ((reg>>8) & 3) );
+#if RAMINIT_SYSINFO == 1
+ sysinfo->sblnk = (reg>>8) & 3;
+ sysinfo->sbbusn = 0;
+ sysinfo->nodes = nodes;
+#endif
tempreg = 3 | ( 0<<4) | (((reg>>8) & 3)<<8) | (0<<16)| (0x3f<<24);
pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0, tempreg);
@@ -639,8 +811,6 @@ static int ht_setup_chains_x(void)
pci_write_config32(PCI_DEV(0, 0x18, 1), 0xc0 + ht_c_num * 8, 0);
}
- nodes = ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1;
-
for(nodeid=0; nodeid<nodes; nodeid++) {
device_t dev;
uint8_t linkn;
@@ -671,7 +841,7 @@ static int ht_setup_chains_x(void)
/* io range allocation */
tempreg = nodeid | (linkn<<4) | ((next_io_base+0x3)<<12); //limit
pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC4 + ht_c_num * 8, tempreg);
- tempreg = 3 | ( 3<<4) | (next_io_base<<12); //base
+ tempreg = 3 /*| ( 3<<4)*/ | (next_io_base<<12); //base :ISA and VGA ?
pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC0 + ht_c_num * 8, tempreg);
next_io_base += 0x3+0x1;
#endif
@@ -717,6 +887,64 @@ static int ht_setup_chains_x(void)
}
}
- return ht_setup_chains(i);
+#if RAMINIT_SYSINFO == 1
+ sysinfo->ht_c_num = i;
+ ht_setup_chains(i, sysinfo);
+#else
+ return ht_setup_chains(i);
+#endif
}
+
+#if RAMINIT_SYSINFO == 1
+static int optimize_link_incoherent_ht(struct sys_info *sysinfo)
+{
+ // We need to use recorded link pair info to optimize the link
+ int i;
+ int reset_needed = 0;
+
+ unsigned link_pair_num = sysinfo->link_pair_num;
+
+ for(i=0; i< link_pair_num; i++) {
+ struct link_pair_st *link_pair= &sysinfo->link_pair[i];
+ reset_needed |= ht_optimize_link(link_pair->udev, link_pair->upos, link_pair->uoffs, link_pair->dev, link_pair->pos, link_pair->offs);
+ }
+
+ reset_needed |= optimize_link_read_pointers(sysinfo->ht_c_num);
+
+ return reset_needed;
+
+}
+#endif
+
+
+static unsigned get_sblnk(void)
+{
+ uint32_t reg;
+ /* read PCI_DEV(0,0x18,0) 0x64 bit [8:9] to find out SbLink m */
+ reg = pci_read_config32(PCI_DEV(0, 0x18, 0), 0x64);
+ return ((reg>>8) & 3) ;
+}
+
+/* Look up a which bus a given node/link combination is on.
+ * return 0 when we can't find the answer.
+ */
+static unsigned node_link_to_bus(unsigned node, unsigned link)
+{
+ unsigned reg;
+
+ for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
+ unsigned config_map;
+ config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
+ if ((config_map & 3) != 3) {
+ continue;
+ }
+ if ((((config_map >> 4) & 7) == node) &&
+ (((config_map >> 8) & 3) == link))
+ {
+ return (config_map >> 16) & 0xff;
+ }
+ }
+ return 0;
+}
+
diff --git a/src/northbridge/amd/amdk8/misc_control.c b/src/northbridge/amd/amdk8/misc_control.c
index 4cd3d0d42d..c7176c3b0d 100644
--- a/src/northbridge/amd/amdk8/misc_control.c
+++ b/src/northbridge/amd/amdk8/misc_control.c
@@ -17,7 +17,8 @@
#include <part/hard_reset.h>
#include <pc80/mc146818rtc.h>
#include <bitops.h>
-#include "./cpu_rev.c"
+#include <cpu/amd/model_fxx_rev.h>
+
#include "amdk8.h"
/**
diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c
index 9febac2f06..d2db902beb 100644
--- a/src/northbridge/amd/amdk8/northbridge.c
+++ b/src/northbridge/amd/amdk8/northbridge.c
@@ -2,6 +2,7 @@
2004.12 yhlu add dual core support
2005.01 yhlu add support move apic before pci_domain in MB Config.lb
2005.02 yhlu add e0 memory hole support
+ 2005.11 yhlu add put sb ht chain on bus 0
*/
#include <console/console.h>
@@ -96,16 +97,15 @@ static unsigned int amdk8_nodeid(device_t dev)
return (dev->path.u.pci.devfn >> 3) - 0x18;
}
-static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
+static unsigned int amdk8_scan_chain(device_t dev, unsigned nodeid, unsigned link, unsigned sblink, unsigned int max, unsigned offset_unitid)
{
- unsigned nodeid;
- unsigned link;
- nodeid = amdk8_nodeid(dev);
#if 0
printk_debug("%s amdk8_scan_chains max: %d starting...\n",
dev_path(dev), max);
#endif
- for(link = 0; link < dev->links; link++) {
+// I want to put sb chain in bus 0 can I?
+
+
uint32_t link_type;
uint32_t busses, config_busses;
unsigned free_reg, config_reg;
@@ -114,13 +114,13 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
link_type = pci_read_config32(dev, dev->link[link].cap + 0x18);
} while(link_type & ConnectionPending);
if (!(link_type & LinkConnected)) {
- continue;
+ return max;
}
do {
link_type = pci_read_config32(dev, dev->link[link].cap + 0x18);
} while(!(link_type & InitComplete));
if (!(link_type & NonCoherent)) {
- continue;
+ return max;
}
/* See if there is an available configuration space mapping
* register in function 1.
@@ -146,14 +146,21 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
* register skip this bus
*/
if (config_reg > 0xec) {
- continue;
+ return max;
}
/* Set up the primary, secondary and subordinate bus numbers.
* We have no idea how many busses are behind this bridge yet,
* so we set the subordinate bus number to 0xff for the moment.
*/
- dev->link[link].secondary = ++max;
+#if K8_SB_HT_CHAIN_ON_BUS0 == 1
+ if((nodeid == 0) && (sblink==link)) { // actually max is 0 here
+ dev->link[link].secondary = max;
+ }
+ else
+#endif
+ dev->link[link].secondary = ++max;
+
dev->link[link].subordinate = 0xff;
/* Read the existing primary/secondary/subordinate bus
@@ -188,7 +195,7 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
/* Now we can scan all of the subordinate busses i.e. the
* chain on the hypertranport link
*/
- max = hypertransport_scan_chain(&dev->link[link], 0, 0xbf, max);
+ max = hypertransport_scan_chain(&dev->link[link], 0, 0xbf, max, offset_unitid);
#if 0
printk_debug("%s Hyper transport scan link: %d new max: %d\n",
@@ -211,14 +218,57 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
printk_debug("%s Hypertransport scan link: %d done\n",
dev_path(dev), link);
#endif
- }
+
+ return max;
+}
+
+static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
+{
+ unsigned nodeid;
+ unsigned link;
+ unsigned sblink = 0;
+ unsigned offset_unitid = 0;
+ nodeid = amdk8_nodeid(dev);
+
+
#if 0
- printk_debug("%s amdk8_scan_chains max: %d done\n",
- dev_path(dev), max);
+ printk_debug("%s amdk8_scan_chains max: %d starting...\n",
+ dev_path(dev), max);
#endif
- return max;
+// I want to put sb chain in bus 0
+
+ if(nodeid==0) {
+ sblink = (pci_read_config32(dev, 0x64)>>8) & 3;
+#if K8_SB_HT_CHAIN_ON_BUS0 == 1
+ #if HT_CHAIN_UNITID_BASE != 1
+ offset_unitid = 1;
+ #endif
+ max = amdk8_scan_chain(dev, nodeid, sblink, sblink, max, offset_unitid ); // do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0
+#endif
+ }
+
+ for(link = 0; link < dev->links; link++) {
+#if K8_SB_HT_CHAIN_ON_BUS0 == 1
+ if( (nodeid == 0) && (sblink == link) ) continue; //already done
+#endif
+ offset_unitid = 0;
+ #if HT_CHAIN_UNITID_BASE != 1
+ #if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
+ if((nodeid == 0) && (sblink == link))
+ #endif
+ offset_unitid = 1;
+ #endif
+
+ max = amdk8_scan_chain(dev, nodeid, link, sblink, max, offset_unitid);
+ }
+#if 0
+ printk_debug("%s amdk8_scan_chains max: %d done\n",
+ dev_path(dev), max);
+#endif
+ return max;
}
+
static int reg_useable(unsigned reg,
device_t goal_dev, unsigned goal_nodeid, unsigned goal_link)
{
@@ -508,7 +558,6 @@ static void amdk8_create_vga_resource(device_t dev, unsigned nodeid)
/* release the temp resource */
resource->flags = 0;
-
}
static void amdk8_set_resources(device_t dev)
@@ -1041,7 +1090,7 @@ static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
for(reg = 0xe0; reg <= 0xec; reg += 4) {
f1_write_config32(reg, 0);
}
- max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0x18, 0), 0xff, max);
+ max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0x18, 0), 0xff, max);
/* Tune the hypertransport transaction for best performance.
* Including enabling relaxed ordering if it is safe.
diff --git a/src/sdram/generic_sdram.c b/src/sdram/generic_sdram.c
index da14166958..7591fae972 100644
--- a/src/sdram/generic_sdram.c
+++ b/src/sdram/generic_sdram.c
@@ -1,3 +1,17 @@
+
+#ifndef RAMINIT_SYSINFO
+ #define RAMINIT_SYSINFO 0
+#endif
+
+static inline void print_debug_sdram_8(const char *strval, uint32_t val)
+{
+#if CONFIG_USE_INIT
+ printk_debug("%s%02x\r\n", strval, val);
+#else
+ print_debug(strval); print_debug_hex8(val); print_debug("\r\n");
+#endif
+}
+
void sdram_no_memory(void)
{
print_err("No memory!!\r\n");
@@ -7,31 +21,34 @@ void sdram_no_memory(void)
}
/* Setup SDRAM */
+#if RAMINIT_SYSINFO == 1
+void sdram_initialize(int controllers, const struct mem_controller *ctrl, void *sysinfo)
+#else
void sdram_initialize(int controllers, const struct mem_controller *ctrl)
+#endif
{
int i;
/* Set the registers we can set once to reasonable values */
for(i = 0; i < controllers; i++) {
-#if CONFIG_USE_INIT
- printk_debug("Ram1.%02x\r\n",i);
-#else
- print_debug("Ram1.");
- print_debug_hex8(i);
- print_debug("\r\n");
-#endif
+ print_debug_sdram_8("Ram1.",i);
+
+ #if RAMINIT_SYSINFO == 1
+ sdram_set_registers(ctrl + i , sysinfo);
+ #else
sdram_set_registers(ctrl + i);
+ #endif
}
/* Now setup those things we can auto detect */
for(i = 0; i < controllers; i++) {
-#if CONFIG_USE_INIT
- printk_debug("Ram2.%02x\r\n",i);
-#else
- print_debug("Ram2.");
- print_debug_hex8(i);
- print_debug("\r\n");
-#endif
- sdram_set_spd_registers(ctrl + i);
+ print_debug_sdram_8("Ram2.",i);
+
+ #if RAMINIT_SYSINFO == 1
+ sdram_set_spd_registers(ctrl + i , sysinfo);
+ #else
+ sdram_set_spd_registers(ctrl + i);
+ #endif
+
}
/* Now that everything is setup enable the SDRAM.
@@ -39,7 +56,12 @@ void sdram_initialize(int controllers, const struct mem_controller *ctrl)
* we need to it by hand.
*/
print_debug("Ram3\r\n");
+
+ #if RAMINIT_SYSINFO == 1
+ sdram_enable(controllers, ctrl, sysinfo);
+ #else
sdram_enable(controllers, ctrl);
+ #endif
print_debug("Ram4\r\n");
}
diff --git a/src/southbridge/amd/amd8111/amd8111_early_ctrl.c b/src/southbridge/amd/amd8111/amd8111_early_ctrl.c
new file mode 100644
index 0000000000..8a648e8d37
--- /dev/null
+++ b/src/southbridge/amd/amd8111/amd8111_early_ctrl.c
@@ -0,0 +1,41 @@
+/* by yhlu 2005.10 */
+static void hard_reset(struct sys_info *sysinfo)
+{
+ device_t dev;
+
+ /* Find the device */
+ dev = PCI_DEV(sysinfo->sbbusn, sysinfo->sbdn+1, 3);
+
+ set_bios_reset();
+
+ /* enable cf9 */
+ pci_write_config8(dev, 0x41, 0xf1);
+ /* reset */
+ outb(0x0e, 0x0cf9);
+}
+
+static void enable_fid_change_on_sb(struct sys_info *sysinfo)
+{
+ device_t dev;
+ /* Find the device */
+ dev = PCI_DEV(sysinfo->sbbusn, sysinfo->sbdn+1, 3);
+
+ pci_write_config8(dev, 0x74, 4);
+
+ /* set VFSMAF ( VID/FID System Management Action Field) to 2 */
+ pci_write_config32(dev, 0x70, 2<<12);
+
+}
+
+static void soft_reset(struct sys_info *sysinfo)
+{
+ device_t dev;
+
+ /* Find the device */
+ dev = PCI_DEV(sysinfo->sbbusn, sysinfo->sbdn+1, 0);
+
+ set_bios_reset();
+ pci_write_config8(dev, 0x47, 1);
+}
+
+
diff --git a/util/newconfig/config.g b/util/newconfig/config.g
index 37dc47ec20..bc3ff6b3dd 100644
--- a/util/newconfig/config.g
+++ b/util/newconfig/config.g
@@ -916,7 +916,7 @@ class partobj:
if ((slot < 0) or (slot > 0x1f)):
fatal("Invalid device id")
if ((function < 0) or (function > 7)):
- fatal("Invalid function")
+ fatal("Invalid pci function %s" % function )
self.set_path(".type=DEVICE_PATH_PCI,.u={.pci={ .devfn = PCI_DEVFN(0x%x,%d)}}" % (slot, function))
def addpnppath(self, port, device):
@@ -939,12 +939,6 @@ class partobj:
fatal("Invalid device")
self.set_path(".type=DEVICE_PATH_APIC,.u={.apic={ .apic_id = 0x%x }}" % (apic_id))
- def addcpupath(self, cpu_id):
- """ Add a relative path to a cpu device hanging off our parent """
- if ((cpu_id < 0) or (cpu_id > 255)):
- fatal("Invalid device")
- self.set_path(".type=DEVICE_PATH_CPU,.u={.cpu={ .id = 0x%x }}" % (cpu_id))
-
def addpci_domainpath(self, pci_domain):
""" Add a pci_domain number to a chip """
if ((pci_domain < 0) or (pci_domain > 0xffff)):
@@ -957,11 +951,11 @@ class partobj:
fatal("Invalid apic cluster: %d is out of the range 0 to ff" % cluster)
self.set_path(".type=DEVICE_PATH_APIC_CLUSTER,.u={.apic_cluster={ .cluster = 0x%x }}" % (cluster))
- def addcpupath(self, id):
+ def addcpupath(self, cpu_id):
""" Add a relative path to a cpu device hanging off our parent """
- if ((id < 0) or (id > 255)):
+ if ((cpu_id < 0) or (cpu_id > 255)):
fatal("Invalid device")
- self.set_path(".type=DEVICE_PATH_CPU,.u={.cpu={ .id = 0x%x }}" % (id))
+ self.set_path(".type=DEVICE_PATH_CPU,.u={.cpu={ .id = 0x%x }}" % (cpu_id))
def addcpu_buspath(self, id):
@@ -2001,6 +1995,7 @@ def writeimagemakefile(image):
# main rule
file.write("\nall: linuxbios.rom\n\n")
+ file.write(".PHONY: all\n\n")
#file.write("include cpuflags\n")
# Putting "include cpuflags" in the Makefile has the problem that the
# cpuflags file would be generated _after_ we want to include it.
@@ -2186,6 +2181,8 @@ def writemakefile(path):
file.write(".PHONY: all clean")
for i in romimages.keys():
file.write(" %s-clean" % i)
+ for i, o in romimages.items():
+ file.write(" %s/linuxbios.rom" % o.getname())
file.write("\n\n")
writemakefilefooter(file, makefilepath)