summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/Kconfig10
-rw-r--r--src/southbridge/intel/Kconfig1
-rw-r--r--src/southbridge/intel/Makefile.inc2
-rw-r--r--src/southbridge/intel/bd82x6x/Kconfig68
-rw-r--r--src/southbridge/intel/bd82x6x/Makefile.inc43
-rw-r--r--src/southbridge/intel/bd82x6x/acpi/audio.asl36
-rw-r--r--src/southbridge/intel/bd82x6x/acpi/globalnvs.asl244
-rw-r--r--src/southbridge/intel/bd82x6x/acpi/irqlinks.asl493
-rw-r--r--src/southbridge/intel/bd82x6x/acpi/lpc.asl248
-rw-r--r--src/southbridge/intel/bd82x6x/acpi/pch.asl269
-rw-r--r--src/southbridge/intel/bd82x6x/acpi/pcie.asl234
-rw-r--r--src/southbridge/intel/bd82x6x/acpi/sata.asl83
-rw-r--r--src/southbridge/intel/bd82x6x/acpi/sleepstates.asl27
-rw-r--r--src/southbridge/intel/bd82x6x/acpi/smbus.asl242
-rw-r--r--src/southbridge/intel/bd82x6x/acpi/usb.asl91
-rw-r--r--src/southbridge/intel/bd82x6x/azalia.c367
-rw-r--r--src/southbridge/intel/bd82x6x/bootblock.c73
-rw-r--r--src/southbridge/intel/bd82x6x/chip.h79
-rw-r--r--src/southbridge/intel/bd82x6x/early_me.c201
-rw-r--r--src/southbridge/intel/bd82x6x/early_smbus.c63
-rw-r--r--src/southbridge/intel/bd82x6x/early_usb.c57
-rw-r--r--src/southbridge/intel/bd82x6x/finalize.c56
-rw-r--r--src/southbridge/intel/bd82x6x/gpio.c65
-rw-r--r--src/southbridge/intel/bd82x6x/gpio.h153
-rw-r--r--src/southbridge/intel/bd82x6x/lpc.c678
-rw-r--r--src/southbridge/intel/bd82x6x/me.c750
-rw-r--r--src/southbridge/intel/bd82x6x/me.h376
-rw-r--r--src/southbridge/intel/bd82x6x/me_8.x.c919
-rw-r--r--src/southbridge/intel/bd82x6x/me_status.c213
-rw-r--r--src/southbridge/intel/bd82x6x/nvs.h139
-rw-r--r--src/southbridge/intel/bd82x6x/pch.c234
-rw-r--r--src/southbridge/intel/bd82x6x/pch.h514
-rw-r--r--src/southbridge/intel/bd82x6x/pci.c145
-rw-r--r--src/southbridge/intel/bd82x6x/pcie.c306
-rw-r--r--src/southbridge/intel/bd82x6x/reset.c41
-rw-r--r--src/southbridge/intel/bd82x6x/sata.c246
-rw-r--r--src/southbridge/intel/bd82x6x/smbus.c113
-rw-r--r--src/southbridge/intel/bd82x6x/smbus.h100
-rw-r--r--src/southbridge/intel/bd82x6x/smi.c403
-rw-r--r--src/southbridge/intel/bd82x6x/smihandler.c709
-rw-r--r--src/southbridge/intel/bd82x6x/usb_debug.c51
-rw-r--r--src/southbridge/intel/bd82x6x/usb_ehci.c124
-rw-r--r--src/southbridge/intel/bd82x6x/watchdog.c59
43 files changed, 9325 insertions, 0 deletions
diff --git a/src/Kconfig b/src/Kconfig
index 0696feb246..b0261d9068 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -869,6 +869,16 @@ config DEBUG_TPM
help
This option enables additional TPM related debug messages.
+if SOUTHBRIDGE_INTEL_BD82X6X && DEFAULT_CONSOLE_LOGLEVEL_8
+# Only visible with the right southbridge and loglevel.
+config DEBUG_INTEL_ME
+ bool "Verbose logging for Intel Management Engine"
+ default n
+ help
+ Enable verbose logging for Intel Management Engine driver that
+ is present on Intel 6-series chipsets.
+endif
+
config LLSHELL
bool "Built-in low-level shell"
default n
diff --git a/src/southbridge/intel/Kconfig b/src/southbridge/intel/Kconfig
index e6ffac9694..cb0ac83008 100644
--- a/src/southbridge/intel/Kconfig
+++ b/src/southbridge/intel/Kconfig
@@ -10,3 +10,4 @@ source src/southbridge/intel/i82801gx/Kconfig
source src/southbridge/intel/i82870/Kconfig
source src/southbridge/intel/pxhd/Kconfig
source src/southbridge/intel/sch/Kconfig
+source src/southbridge/intel/bd82x6x/Kconfig
diff --git a/src/southbridge/intel/Makefile.inc b/src/southbridge/intel/Makefile.inc
index b399955744..6869e5b837 100644
--- a/src/southbridge/intel/Makefile.inc
+++ b/src/southbridge/intel/Makefile.inc
@@ -10,3 +10,5 @@ subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx
subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82870) += i82870
subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_PXHD) += pxhd
subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_SCH) += sch
+subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_BD82X6X) += bd82x6x
+subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_C216) += bd82x6x
diff --git a/src/southbridge/intel/bd82x6x/Kconfig b/src/southbridge/intel/bd82x6x/Kconfig
new file mode 100644
index 0000000000..3891be13b0
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/Kconfig
@@ -0,0 +1,68 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2011 Google Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+config SOUTHBRIDGE_INTEL_BD82X6X
+ bool
+
+config SOUTHBRIDGE_INTEL_C216
+ bool
+
+if SOUTHBRIDGE_INTEL_BD82X6X || SOUTHBRIDGE_INTEL_C216
+
+config SOUTH_BRIDGE_OPTIONS # dummy
+ def_bool y
+ select IOAPIC
+ select HAVE_HARD_RESET
+ select HAVE_USBDEBUG
+ select USE_WATCHDOG_ON_BOOT
+ select PCIEXP_ASPM
+ select PCIEXP_COMMON_CLOCK
+
+config EHCI_BAR
+ hex
+ default 0xfef00000
+
+config EHCI_DEBUG_OFFSET
+ hex
+ default 0xa0
+
+config BOOTBLOCK_SOUTHBRIDGE_INIT
+ string
+ default "southbridge/intel/bd82x6x/bootblock.c"
+
+config SERIRQ_CONTINUOUS_MODE
+ bool
+ default n
+ help
+ If you set this option to y, the serial IRQ machine will be
+ operated in continuous mode.
+
+endif
+
+if SOUTHBRIDGE_INTEL_BD82X6X
+config PCH_CHIP_NAME
+ string
+ default "Cougar Point"
+endif
+
+if SOUTHBRIDGE_INTEL_C216
+config PCH_CHIP_NAME
+ string
+ default "Panther Point"
+endif
diff --git a/src/southbridge/intel/bd82x6x/Makefile.inc b/src/southbridge/intel/bd82x6x/Makefile.inc
new file mode 100644
index 0000000000..57322542ac
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/Makefile.inc
@@ -0,0 +1,43 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2010 Google Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+me-src-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += me.c
+me-src-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += me_8.x.c
+
+driver-y += pch.c
+driver-y += azalia.c
+driver-y += lpc.c
+driver-y += pci.c
+driver-y += pcie.c
+driver-y += sata.c
+driver-y += usb_ehci.c
+driver-y += $(me-src-y)
+driver-y += smbus.c
+
+ramstage-y += me_status.c
+ramstage-y += reset.c
+ramstage-y += watchdog.c
+
+ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c
+smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c $(me-src-y) finalize.c
+
+romstage-y += early_usb.c early_smbus.c early_me.c me_status.c gpio.c
+romstage-$(CONFIG_USBDEBUG) += usb_debug.c
+romstage-y += reset.c
+
diff --git a/src/southbridge/intel/bd82x6x/acpi/audio.asl b/src/southbridge/intel/bd82x6x/acpi/audio.asl
new file mode 100644
index 0000000000..a4553289f2
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/acpi/audio.asl
@@ -0,0 +1,36 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* Intel PCH HDA */
+
+// Intel High Definition Audio (Azalia) 0:1b.0
+
+Device (HDEF)
+{
+ Name (_ADR, 0x001b0000)
+
+ // Power Resources for Wake
+ Name (_PRW, Package(){
+ 13, // Bit 13 of GPE
+ 4 // Can wake from S4 state.
+ })
+}
+
diff --git a/src/southbridge/intel/bd82x6x/acpi/globalnvs.asl b/src/southbridge/intel/bd82x6x/acpi/globalnvs.asl
new file mode 100644
index 0000000000..df450e3d01
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/acpi/globalnvs.asl
@@ -0,0 +1,244 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* Global Variables */
+
+Name(\PICM, 0) // IOAPIC/8259
+Name(\DSEN, 1) // Display Output Switching Enable
+
+/* Global ACPI memory region. This region is used for passing information
+ * between coreboot (aka "the system bios"), ACPI, and the SMI handler.
+ * Since we don't know where this will end up in memory at ACPI compile time,
+ * we have to fix it up in coreboot's ACPI creation phase.
+ */
+
+
+OperationRegion (GNVS, SystemMemory, 0xC0DEBABE, 0xf00)
+Field (GNVS, ByteAcc, NoLock, Preserve)
+{
+ /* Miscellaneous */
+ Offset (0x00),
+ OSYS, 16, // 0x00 - Operating System
+ SMIF, 8, // 0x02 - SMI function
+ PRM0, 8, // 0x03 - SMI function parameter
+ PRM1, 8, // 0x04 - SMI function parameter
+ SCIF, 8, // 0x05 - SCI function
+ PRM2, 8, // 0x06 - SCI function parameter
+ PRM3, 8, // 0x07 - SCI function parameter
+ LCKF, 8, // 0x08 - Global Lock function for EC
+ PRM4, 8, // 0x09 - Lock function parameter
+ PRM5, 8, // 0x0a - Lock function parameter
+ P80D, 32, // 0x0b - Debug port (IO 0x80) value
+ LIDS, 8, // 0x0f - LID state (open = 1)
+ PWRS, 8, // 0x10 - Power State (AC = 1)
+ /* Thermal policy */
+ Offset (0x11),
+ TLVL, 8, // 0x11 - Throttle Level Limit
+ FLVL, 8, // 0x12 - Current FAN Level
+ TCRT, 8, // 0x13 - Critical Threshold
+ TPSV, 8, // 0x14 - Passive Threshold
+ TMAX, 8, // 0x15 - CPU Tj_max
+ F0OF, 8, // 0x16 - FAN 0 OFF Threshold
+ F0ON, 8, // 0x17 - FAN 0 ON Threshold
+ F0PW, 8, // 0x18 - FAN 0 PWM value
+ F1OF, 8, // 0x19 - FAN 1 OFF Threshold
+ F1ON, 8, // 0x1a - FAN 1 ON Threshold
+ F1PW, 8, // 0x1b - FAN 1 PWM value
+ F2OF, 8, // 0x1c - FAN 2 OFF Threshold
+ F2ON, 8, // 0x1d - FAN 2 ON Threshold
+ F2PW, 8, // 0x1e - FAN 2 PWM value
+ F3OF, 8, // 0x1f - FAN 3 OFF Threshold
+ F3ON, 8, // 0x20 - FAN 3 ON Threshold
+ F3PW, 8, // 0x21 - FAN 3 PWM value
+ F4OF, 8, // 0x22 - FAN 4 OFF Threshold
+ F4ON, 8, // 0x23 - FAN 4 ON Threshold
+ F4PW, 8, // 0x24 - FAN 4 PWM value
+ /* Processor Identification */
+ Offset (0x28),
+ APIC, 8, // 0x28 - APIC Enabled by coreboot
+ MPEN, 8, // 0x29 - Multi Processor Enable
+ PCP0, 8, // 0x2a - PDC CPU/CORE 0
+ PCP1, 8, // 0x2b - PDC CPU/CORE 1
+ PPCM, 8, // 0x2c - Max. PPC state
+ PCNT, 8, // 0x2d - Processor count
+ /* Super I/O & CMOS config */
+ Offset (0x32),
+ NATP, 8, // 0x32 -
+ S5U0, 8, // 0x32 - Enable USB0 in S5
+ S5U1, 8, // 0x33 - Enable USB1 in S5
+ S3U0, 8, // 0x35 - Enable USB0 in S3
+ S3U1, 8, // 0x36 - Enable USB1 in S3
+ S33G, 8, // 0x37 - Enable 3G in S3
+ CMEM, 32, // 0x38 - CBMEM TOC
+ /* Integrated Graphics Device */
+ Offset (0x3c),
+ IGDS, 8, // 0x3c - IGD state (primary = 1)
+ TLST, 8, // 0x3d - Display Toggle List pointer
+ CADL, 8, // 0x3e - Currently Attached Devices List
+ PADL, 8, // 0x3f - Previously Attached Devices List
+ CSTE, 16, // 0x40 - Current display state
+ NSTE, 16, // 0x42 - Next display state
+ SSTE, 16, // 0x44 - Set display state
+ Offset (0x46),
+ NDID, 8, // 0x46 - Number of Device IDs
+ DID1, 32, // 0x47 - Device ID 1
+ DID2, 32, // 0x4b - Device ID 2
+ DID3, 32, // 0x4f - Device ID 3
+ DID4, 32, // 0x53 - Device ID 4
+ DID5, 32, // 0x57 - Device ID 5
+ /* Backlight Control */
+ Offset (0x64),
+ BLCS, 8, // 0x64 - Backlight control possible?
+ BRTL, 8, // 0x65 - Brightness Level
+ ODDS, 8, // 0x66
+ /* Ambient Light Sensors */
+ Offset (0x6e),
+ ALSE, 8, // 0x6e - ALS enable
+ ALAF, 8, // 0x6f - Ambient light adjustment factor
+ LLOW, 8, // 0x70 - LUX Low
+ LHIH, 8, // 0x71 - LUX High
+ /* EMA */
+ Offset (0x78),
+ EMAE, 8, // 0x78 - EMA enable
+ EMAP, 16, // 0x79 - EMA pointer
+ EMAL, 16, // 0x7b - EMA length
+ /* MEF */
+ Offset (0x82),
+ MEFE, 8, // 0x82 - MEF enable
+ /* TPM support */
+ Offset (0x8c),
+ TPMP, 8, // 0x8c - TPM
+ TPME, 8, // 0x8d - TPM enable
+ /* SATA */
+ Offset (0x96),
+ GTF0, 56, // 0x96 - GTF task file buffer for port 0
+ GTF1, 56, // 0x9d - GTF task file buffer for port 1
+ GTF2, 56, // 0xa4 - GTF task file buffer for port 2
+ IDEM, 8, // 0xab - IDE mode (compatible / enhanced)
+ IDET, 8, // 0xac - IDE
+ /* IGD OpRegion */
+ Offset (0xb4),
+ ASLB, 32, // 0xb4 - IGD OpRegion Base Address
+ IBTT, 8, // 0xb8 - IGD boot panel device
+ IPAT, 8, // 0xb9 - IGD panel type cmos option
+ ITVF, 8, // 0xba - IGD TV format cmos option
+ ITVM, 8, // 0xbb - IGD TV minor format option
+ IPSC, 8, // 0xbc - IGD panel scaling
+ IBLC, 8, // 0xbd - IGD BLC config
+ IBIA, 8, // 0xbe - IGD BIA config
+ ISSC, 8, // 0xbf - IGD SSC config
+ I409, 8, // 0xc0 - IGD 0409 modified settings
+ I509, 8, // 0xc1 - IGD 0509 modified settings
+ I609, 8, // 0xc2 - IGD 0609 modified settings
+ I709, 8, // 0xc3 - IGD 0709 modified settings
+ IDMM, 8, // 0xc4 - IGD DVMT Mode
+ IDMS, 8, // 0xc5 - IGD DVMT memory size
+ IF1E, 8, // 0xc6 - IGD function 1 enable
+ HVCO, 8, // 0xc7 - IGD HPLL VCO
+ NXD1, 32, // 0xc8 - IGD _DGS next DID1
+ NXD2, 32, // 0xcc - IGD _DGS next DID2
+ NXD3, 32, // 0xd0 - IGD _DGS next DID3
+ NXD4, 32, // 0xd4 - IGD _DGS next DID4
+ NXD5, 32, // 0xd8 - IGD _DGS next DID5
+ NXD6, 32, // 0xdc - IGD _DGS next DID6
+ NXD7, 32, // 0xe0 - IGD _DGS next DID7
+ NXD8, 32, // 0xe4 - IGD _DGS next DID8
+
+ /* ChromeOS specific */
+ Offset (0xf0),
+ #include <vendorcode/google/chromeos/acpi/gnvs.asl>
+ // 0xe8a - end
+}
+
+/* Set flag to enable USB charging in S3 */
+Method (S3UE)
+{
+ Store (One, \S3U0)
+ Store (One, \S3U1)
+}
+
+/* Set flag to disable USB charging in S3 */
+Method (S3UD)
+{
+ Store (Zero, \S3U0)
+ Store (Zero, \S3U1)
+}
+
+/* Set flag to enable USB charging in S5 */
+Method (S5UE)
+{
+ Store (One, \S5U0)
+ Store (One, \S5U1)
+}
+
+/* Set flag to disable USB charging in S5 */
+Method (S5UD)
+{
+ Store (Zero, \S5U0)
+ Store (Zero, \S5U1)
+}
+
+/* Set flag to enable 3G module in S3 */
+Method (S3GE)
+{
+ Store (One, \S33G)
+}
+
+/* Set flag to disable 3G module in S3 */
+Method (S3GD)
+{
+ Store (Zero, \S33G)
+}
+
+/* Update Fan 0 thresholds */
+Method (F0UT, 2)
+{
+ Store (Arg0, \F0OF)
+ Store (Arg1, \F0ON)
+}
+
+/* Update Fan 1 thresholds */
+Method (F1UT, 2)
+{
+ Store (Arg0, \F1OF)
+ Store (Arg1, \F1ON)
+}
+
+/* Update Fan 2 thresholds */
+Method (F2UT, 2)
+{
+ Store (Arg0, \F2OF)
+ Store (Arg1, \F2ON)
+}
+
+/* Update Fan 3 thresholds */
+Method (F3UT, 2)
+{
+ Store (Arg0, \F3OF)
+ Store (Arg1, \F3ON)
+}
+
+/* Update Fan 4 thresholds */
+Method (F4UT, 2)
+{
+ Store (Arg0, \F4OF)
+ Store (Arg1, \F4ON)
+}
diff --git a/src/southbridge/intel/bd82x6x/acpi/irqlinks.asl b/src/southbridge/intel/bd82x6x/acpi/irqlinks.asl
new file mode 100644
index 0000000000..5fcee45f29
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/acpi/irqlinks.asl
@@ -0,0 +1,493 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Device (LNKA)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 1)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTA)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLA, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLA, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTA
+ ShiftLeft(1, And(PRTA, 0x0f), IRQ0)
+
+ Return (RTLA)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTA)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTA, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKB)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 2)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTB)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLB, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLB, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTB
+ ShiftLeft(1, And(PRTB, 0x0f), IRQ0)
+
+ Return (RTLB)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTB)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTB, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKC)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 3)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTC)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLC, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLC, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTC
+ ShiftLeft(1, And(PRTC, 0x0f), IRQ0)
+
+ Return (RTLC)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTC)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTC, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKD)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 4)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTD)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLD, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLD, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTD
+ ShiftLeft(1, And(PRTD, 0x0f), IRQ0)
+
+ Return (RTLD)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTD)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTD, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKE)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 5)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTE)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLE, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLE, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTE
+ ShiftLeft(1, And(PRTE, 0x0f), IRQ0)
+
+ Return (RTLE)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTE)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTE, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKF)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 6)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTF)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLF, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLF, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTF
+ ShiftLeft(1, And(PRTF, 0x0f), IRQ0)
+
+ Return (RTLF)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTF)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTF, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKG)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 7)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTG)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLG, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLG, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTG
+ ShiftLeft(1, And(PRTG, 0x0f), IRQ0)
+
+ Return (RTLG)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTG)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTG, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKH)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 8)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTH)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLH, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLH, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTH
+ ShiftLeft(1, And(PRTH, 0x0f), IRQ0)
+
+ Return (RTLH)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTH)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTH, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
diff --git a/src/southbridge/intel/bd82x6x/acpi/lpc.asl b/src/southbridge/intel/bd82x6x/acpi/lpc.asl
new file mode 100644
index 0000000000..cc59850ec4
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/acpi/lpc.asl
@@ -0,0 +1,248 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+// Intel LPC Bus Device - 0:1f.0
+
+Device (LPCB)
+{
+ Name(_ADR, 0x001f0000)
+
+ OperationRegion(LPC0, PCI_Config, 0x00, 0x100)
+ Field (LPC0, AnyAcc, NoLock, Preserve)
+ {
+ Offset (0x40),
+ PMBS, 16, // PMBASE
+ Offset (0x60), // Interrupt Routing Registers
+ PRTA, 8,
+ PRTB, 8,
+ PRTC, 8,
+ PRTD, 8,
+ Offset (0x68),
+ PRTE, 8,
+ PRTF, 8,
+ PRTG, 8,
+ PRTH, 8,
+
+ Offset (0x80), // IO Decode Ranges
+ IOD0, 8,
+ IOD1, 8,
+
+ Offset (0xb8), // GPIO Routing Control
+ GR00, 2,
+ GR01, 2,
+ GR02, 2,
+ GR03, 2,
+ GR04, 2,
+ GR05, 2,
+ GR06, 2,
+ GR07, 2,
+ GR08, 2,
+ GR09, 2,
+ GR10, 2,
+ GR11, 2,
+ GR12, 2,
+ GR13, 2,
+ GR14, 2,
+ GR15, 2,
+
+ Offset (0xf0), // RCBA
+ RCEN, 1,
+ , 13,
+ RCBA, 18,
+ }
+
+ #include "irqlinks.asl"
+
+ #include "acpi/ec.asl"
+
+ Device (DMAC) // DMA Controller
+ {
+ Name(_HID, EISAID("PNP0200"))
+ Name(_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x00, 0x00, 0x01, 0x20)
+ IO (Decode16, 0x81, 0x81, 0x01, 0x11)
+ IO (Decode16, 0x93, 0x93, 0x01, 0x0d)
+ IO (Decode16, 0xc0, 0xc0, 0x01, 0x20)
+ DMA (Compatibility, NotBusMaster, Transfer8_16) { 4 }
+ })
+ }
+
+ Device (FWH) // Firmware Hub
+ {
+ Name (_HID, EISAID("INT0800"))
+ Name (_CRS, ResourceTemplate()
+ {
+ Memory32Fixed(ReadOnly, 0xff000000, 0x01000000)
+ })
+ }
+
+ Device (HPET)
+ {
+ Name (_HID, EISAID("PNP0103"))
+ Name (_CID, 0x010CD041)
+
+ Name(BUF0, ResourceTemplate()
+ {
+ Memory32Fixed(ReadOnly, 0xfed00000, 0x400, FED0)
+ })
+
+ Method (_STA, 0) // Device Status
+ {
+ If (HPTE) {
+ // Note: Ancient versions of Windows don't want
+ // to see the HPET in order to work right
+ If (LGreaterEqual(OSYS, 2001)) {
+ Return (0xf) // Enable and show device
+ } Else {
+ Return (0xb) // Enable and don't show device
+ }
+ }
+
+ Return (0x0) // Not enabled, don't show.
+ }
+
+ Method (_CRS, 0, Serialized) // Current resources
+ {
+ If (HPTE) {
+ CreateDWordField(BUF0, \_SB.PCI0.LPCB.HPET.FED0._BAS, HPT0)
+ If (Lequal(HPAS, 1)) {
+ Store(0xfed01000, HPT0)
+ }
+
+ If (Lequal(HPAS, 2)) {
+ Store(0xfed02000, HPT0)
+ }
+
+ If (Lequal(HPAS, 3)) {
+ Store(0xfed03000, HPT0)
+ }
+ }
+
+ Return (BUF0)
+ }
+ }
+
+ Device(PIC) // 8259 Interrupt Controller
+ {
+ Name(_HID,EISAID("PNP0000"))
+ Name(_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x20, 0x20, 0x01, 0x02)
+ IO (Decode16, 0x24, 0x24, 0x01, 0x02)
+ IO (Decode16, 0x28, 0x28, 0x01, 0x02)
+ IO (Decode16, 0x2c, 0x2c, 0x01, 0x02)
+ IO (Decode16, 0x30, 0x30, 0x01, 0x02)
+ IO (Decode16, 0x34, 0x34, 0x01, 0x02)
+ IO (Decode16, 0x38, 0x38, 0x01, 0x02)
+ IO (Decode16, 0x3c, 0x3c, 0x01, 0x02)
+ IO (Decode16, 0xa0, 0xa0, 0x01, 0x02)
+ IO (Decode16, 0xa4, 0xa4, 0x01, 0x02)
+ IO (Decode16, 0xa8, 0xa8, 0x01, 0x02)
+ IO (Decode16, 0xac, 0xac, 0x01, 0x02)
+ IO (Decode16, 0xb0, 0xb0, 0x01, 0x02)
+ IO (Decode16, 0xb4, 0xb4, 0x01, 0x02)
+ IO (Decode16, 0xb8, 0xb8, 0x01, 0x02)
+ IO (Decode16, 0xbc, 0xbc, 0x01, 0x02)
+ IO (Decode16, 0x4d0, 0x4d0, 0x01, 0x02)
+ IRQNoFlags () { 2 }
+ })
+ }
+
+ Device(MATH) // FPU
+ {
+ Name (_HID, EISAID("PNP0C04"))
+ Name (_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0xf0, 0xf0, 0x01, 0x01)
+ IRQNoFlags() { 13 }
+ })
+ }
+
+ Device(LDRC) // LPC device: Resource consumption
+ {
+ Name (_HID, EISAID("PNP0C02"))
+ Name (_UID, 2)
+ Name (_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x2e, 0x2e, 0x1, 0x02) // First SuperIO
+ IO (Decode16, 0x4e, 0x4e, 0x1, 0x02) // Second SuperIO
+ IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status
+ IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved
+ IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved
+ IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved
+ IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post
+ IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved
+ IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI
+ //IO (Decode16, 0x800, 0x800, 0x1, 0x10) // ACPI I/O trap
+ IO (Decode16, DEFAULT_PMBASE, DEFAULT_PMBASE, 0x1, 0x80) // ICH7-M ACPI
+ IO (Decode16, DEFAULT_GPIOBASE, DEFAULT_GPIOBASE, 0x1, 0x40) // ICH7-M GPIO
+ })
+ }
+
+ Device (RTC) // Real Time Clock
+ {
+ Name (_HID, EISAID("PNP0B00"))
+ Name (_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x70, 0x70, 1, 8)
+// Disable as Windows doesn't like it, and systems don't seem to use it.
+// IRQNoFlags() { 8 }
+ })
+ }
+
+ Device (TIMR) // Intel 8254 timer
+ {
+ Name(_HID, EISAID("PNP0100"))
+ Name(_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x40, 0x40, 0x01, 0x04)
+ IO (Decode16, 0x50, 0x50, 0x10, 0x04)
+ IRQNoFlags() {0}
+ })
+ }
+
+ #include "acpi/superio.asl"
+
+#ifdef ENABLE_TPM
+ Device (TPM) // Trusted Platform Module
+ {
+ Name(_HID, EISAID("IFX0102"))
+ Name(_CID, 0x310cd041)
+ Name(_UID, 1)
+
+ Method(_STA, 0)
+ {
+ If (TPMP) {
+ Return (0xf)
+ }
+ Return (0x0)
+ }
+
+ Name(_CRS, ResourceTemplate() {
+ IO (Decode16, 0x2e, 0x2e, 0x01, 0x02)
+ IO (Decode16, 0x6f0, 0x6f0, 0x01, 0x10)
+ Memory32Fixed (ReadWrite, 0xfed40000, 0x5000)
+ IRQ (Edge, Activehigh, Exclusive) { 6 }
+ })
+ }
+#endif
+}
diff --git a/src/southbridge/intel/bd82x6x/acpi/pch.asl b/src/southbridge/intel/bd82x6x/acpi/pch.asl
new file mode 100644
index 0000000000..3e6651da75
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/acpi/pch.asl
@@ -0,0 +1,269 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* Intel Cougar Point PCH support */
+
+Scope(\)
+{
+ // IO-Trap at 0x800. This is the ACPI->SMI communication interface.
+
+ OperationRegion(IO_T, SystemIO, 0x800, 0x10)
+ Field(IO_T, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0x8),
+ TRP0, 8 // IO-Trap at 0x808
+ }
+
+ // PCH Power Management Registers, located at PMBASE (0x1f.0 0x40.l)
+ OperationRegion(PMIO, SystemIO, DEFAULT_PMBASE, 0x80)
+ Field(PMIO, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0x20), // GPE0_STS
+ , 16,
+ GS00, 1, // GPIO00 SCI/Wake Status
+ GS01, 1, // GPIO01 SCI/Wake Status
+ GS02, 1, // GPIO02 SCI/Wake Status
+ GS03, 1, // GPIO03 SCI/Wake Status
+ GS04, 1, // GPIO04 SCI/Wake Status
+ GS05, 1, // GPIO05 SCI/Wake Status
+ GS06, 1, // GPIO06 SCI/Wake Status
+ GS07, 1, // GPIO07 SCI/Wake Status
+ GS08, 1, // GPIO08 SCI/Wake Status
+ GS09, 1, // GPIO09 SCI/Wake Status
+ GS10, 1, // GPIO10 SCI/Wake Status
+ GS11, 1, // GPIO11 SCI/Wake Status
+ GS12, 1, // GPIO12 SCI/Wake Status
+ GS13, 1, // GPIO13 SCI/Wake Status
+ GS14, 1, // GPIO14 SCI/Wake Status
+ GS15, 1, // GPIO15 SCI/Wake Status
+ Offset(0x28), // GPE0_EN
+ , 16,
+ GE00, 1, // GPIO00 SCI/Wake Enable
+ GE01, 1, // GPIO01 SCI/Wake Enable
+ GE02, 1, // GPIO02 SCI/Wake Enable
+ GE03, 1, // GPIO03 SCI/Wake Enable
+ GE04, 1, // GPIO04 SCI/Wake Enable
+ GE05, 1, // GPIO05 SCI/Wake Enable
+ GE06, 1, // GPIO06 SCI/Wake Enable
+ GE07, 1, // GPIO07 SCI/Wake Enable
+ GE08, 1, // GPIO08 SCI/Wake Enable
+ GE09, 1, // GPIO09 SCI/Wake Enable
+ GE10, 1, // GPIO10 SCI/Wake Enable
+ GE11, 1, // GPIO11 SCI/Wake Enable
+ GE12, 1, // GPIO12 SCI/Wake Enable
+ GE13, 1, // GPIO13 SCI/Wake Enable
+ GE14, 1, // GPIO14 SCI/Wake Enable
+ GE15, 1, // GPIO15 SCI/Wake Enable
+ Offset(0x42), // General Purpose Control
+ , 1, // skip 1 bit
+ GPEC, 1, // SWGPE_CTRL
+ }
+
+ // GPIO IO mapped registers (0x1f.0 reg 0x48.l)
+ OperationRegion(GPIO, SystemIO, DEFAULT_GPIOBASE, 0x6c)
+ Field(GPIO, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0x00), // GPIO Use Select
+ GU00, 8,
+ GU01, 8,
+ GU02, 8,
+ GU03, 8,
+ Offset(0x04), // GPIO IO Select
+ GIO0, 8,
+ GIO1, 8,
+ GIO2, 8,
+ GIO3, 8,
+ Offset(0x0c), // GPIO Level
+ GL00, 1,
+ GP01, 1,
+ GP02, 1,
+ GP0e, 1,
+ GP04, 1,
+ GP05, 1,
+ GP06, 1,
+ GP07, 1,
+ GP08, 1,
+ GP09, 1,
+ GP10, 1,
+ GP11, 1,
+ GP12, 1,
+ GP13, 1,
+ GP14, 1,
+ GP15, 1,
+ GP16, 1,
+ GP17, 1,
+ GP18, 1,
+ GP19, 1,
+ GP20, 1,
+ GP21, 1,
+ GP22, 1,
+ GP23, 1,
+ GP24, 1,
+ GP25, 1,
+ GP26, 1,
+ GP27, 1,
+ GP28, 1,
+ GP29, 1,
+ GP30, 1,
+ GP31, 1,
+ Offset(0x18), // GPIO Blink
+ GB00, 8,
+ GB01, 8,
+ GB02, 8,
+ GB03, 8,
+ Offset(0x2c), // GPIO Invert
+ GIV0, 8,
+ GIV1, 8,
+ GIV2, 8,
+ GIV3, 8,
+ Offset(0x30), // GPIO Use Select 2
+ GU04, 8,
+ GU05, 8,
+ GU06, 8,
+ GU07, 8,
+ Offset(0x34), // GPIO IO Select 2
+ GIO4, 8,
+ GIO5, 8,
+ GIO6, 8,
+ GIO7, 8,
+ Offset(0x38), // GPIO Level 2
+ GP32, 1,
+ GP33, 1,
+ GP34, 1,
+ GP35, 1,
+ GP36, 1,
+ GP37, 1,
+ GP38, 1,
+ GP39, 1,
+ GP40, 1,
+ GP41, 1,
+ GP42, 1,
+ GP43, 1,
+ GP44, 1,
+ GP45, 1,
+ GP46, 1,
+ GP47, 1,
+ GP48, 1,
+ GP49, 1,
+ GP50, 1,
+ GP51, 1,
+ GP52, 1,
+ GP53, 1,
+ GP54, 1,
+ GP55, 1,
+ GP56, 1,
+ GP57, 1,
+ GP58, 1,
+ GP59, 1,
+ GP60, 1,
+ GP61, 1,
+ GP62, 1,
+ GP63, 1,
+ Offset(0x40), // GPIO Use Select 3
+ GU08, 8,
+ GU09, 4,
+ Offset(0x44), // GPIO IO Select 3
+ GIO8, 8,
+ GIO9, 4,
+ Offset(0x48), // GPIO Level 3
+ GP64, 1,
+ GP65, 1,
+ GP66, 1,
+ GP67, 1,
+ GP68, 1,
+ GP69, 1,
+ GP70, 1,
+ GP71, 1,
+ GP72, 1,
+ GP73, 1,
+ GP74, 1,
+ GP75, 1,
+ }
+
+
+ // ICH7 Root Complex Register Block. Memory Mapped through RCBA)
+ OperationRegion(RCRB, SystemMemory, DEFAULT_RCBA, 0x4000)
+ Field(RCRB, DWordAcc, Lock, Preserve)
+ {
+ Offset(0x0000), // Backbone
+ Offset(0x1000), // Chipset
+ Offset(0x3000), // Legacy Configuration Registers
+ Offset(0x3404), // High Performance Timer Configuration
+ HPAS, 2, // Address Select
+ , 5,
+ HPTE, 1, // Address Enable
+ Offset(0x3418), // FD (Function Disable)
+ , 2, // Reserved
+ SATD, 1, // SATA disable
+ SMBD, 1, // SMBUS disable
+ HDAD, 1, // Azalia disable
+ , 2, // Reserved
+ ILND, 1, // Internal LAN disable
+ US1D, 1, // UHCI #1 disable
+ US2D, 1, // UHCI #2 disable
+ US3D, 1, // UHCI #3 disable
+ US4D, 1, // UHCI #4 disable
+ , 2, // Reserved
+ LPBD, 1, // LPC bridge disable
+ EHCD, 1, // EHCI disable
+ Offset(0x341a), // FD Root Ports
+ RP1D, 1, // Root Port 1 disable
+ RP2D, 1, // Root Port 2 disable
+ RP3D, 1, // Root Port 3 disable
+ RP4D, 1 // Root Port 4 disable
+ }
+
+}
+
+// High Definition Audio (Azalia) 0:1b.0
+#include "audio.asl"
+
+// PCI Express Ports 0:1c.x
+#include "pcie.asl"
+
+// USB 0:1d.0 and 0:1a.0
+#include "usb.asl"
+
+// LPC Bridge 0:1f.0
+#include "lpc.asl"
+
+// SATA 0:1f.2, 0:1f.5
+#include "sata.asl"
+
+// SMBus 0:1f.3
+#include "smbus.asl"
+
+Method (_OSC, 4)
+{
+ /* Check for proper GUID */
+ If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766")))
+ {
+ /* Let OS control everything */
+ Return (Arg3)
+ }
+ Else
+ {
+ /* Unrecognized UUID */
+ CreateDWordField (Arg3, 0, CDW1)
+ Or (CDW1, 4, CDW1)
+ Return (Arg3)
+ }
+}
diff --git a/src/southbridge/intel/bd82x6x/acpi/pcie.asl b/src/southbridge/intel/bd82x6x/acpi/pcie.asl
new file mode 100644
index 0000000000..f6b93bf716
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/acpi/pcie.asl
@@ -0,0 +1,234 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* Intel Cougar Point PCH PCIe support */
+
+// PCI Express Ports
+
+Device (RP01)
+{
+ NAME(_ADR, 0x001c0000) // FIXME: Have a macro for PCI Devices -> ACPI notation?
+ //#include "pcie_port.asl"
+ Method(_PRT)
+ {
+ If (PICM) {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, 0, 16 },
+ Package() { 0x0000ffff, 1, 0, 17 },
+ Package() { 0x0000ffff, 2, 0, 18 },
+ Package() { 0x0000ffff, 3, 0, 19 }
+ })
+ } Else {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }
+ })
+
+ }
+
+ }
+}
+
+Device (RP02)
+{
+ NAME(_ADR, 0x001c0001) // FIXME: Have a macro for PCI Devices -> ACPI notation?
+ //#include "pcie_port.asl"
+ Method(_PRT)
+ {
+ If (PICM) {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, 0, 17 },
+ Package() { 0x0000ffff, 1, 0, 18 },
+ Package() { 0x0000ffff, 2, 0, 19 },
+ Package() { 0x0000ffff, 3, 0, 16 }
+ })
+ } Else {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 },
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }
+ })
+
+ }
+
+ }
+}
+
+Device (RP03)
+{
+ NAME(_ADR, 0x001c0002) // FIXME: Have a macro for PCI Devices -> ACPI notation?
+ //#include "pcie_port.asl"
+ Method(_PRT)
+ {
+ If (PICM) {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, 0, 18 },
+ Package() { 0x0000ffff, 1, 0, 19 },
+ Package() { 0x0000ffff, 2, 0, 16 },
+ Package() { 0x0000ffff, 3, 0, 17 }
+ })
+ } Else {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKD, 0 },
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKA, 0 },
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKB, 0 }
+ })
+
+ }
+
+ }
+}
+
+Device (RP04)
+{
+ NAME(_ADR, 0x001c0003) // FIXME: Have a macro for PCI Devices -> ACPI notation?
+ //#include "pcie_port.asl"
+ Method(_PRT)
+ {
+ If (PICM) {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, 0, 17 },
+ Package() { 0x0000ffff, 1, 0, 18 },
+ Package() { 0x0000ffff, 2, 0, 19 },
+ Package() { 0x0000ffff, 3, 0, 16 }
+ })
+ } Else {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 },
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }
+ })
+
+ }
+
+ }
+}
+
+Device (RP05)
+{
+ NAME(_ADR, 0x001c0004) // FIXME: Have a macro for PCI Devices -> ACPI notation?
+ //#include "pcie_port.asl"
+ Method(_PRT)
+ {
+ If (PICM) {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, 0, 16 },
+ Package() { 0x0000ffff, 1, 0, 17 },
+ Package() { 0x0000ffff, 2, 0, 18 },
+ Package() { 0x0000ffff, 3, 0, 19 }
+ })
+ } Else {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }
+ })
+
+ }
+
+ }
+}
+
+Device (RP06)
+{
+ NAME(_ADR, 0x001c0005) // FIXME: Have a macro for PCI Devices -> ACPI notation?
+ //#include "pcie_port.asl"
+ Method(_PRT)
+ {
+ If (PICM) {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, 0, 17 },
+ Package() { 0x0000ffff, 1, 0, 18 },
+ Package() { 0x0000ffff, 2, 0, 19 },
+ Package() { 0x0000ffff, 3, 0, 16 }
+ })
+ } Else {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 },
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }
+ })
+
+ }
+
+ }
+}
+
+Device (RP07)
+{
+ NAME(_ADR, 0x001c0006) // FIXME: Have a macro for PCI Devices -> ACPI notation?
+ //#include "pcie_port.asl"
+ Method(_PRT)
+ {
+ If (PICM) {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, 0, 18 },
+ Package() { 0x0000ffff, 1, 0, 19 },
+ Package() { 0x0000ffff, 2, 0, 16 },
+ Package() { 0x0000ffff, 3, 0, 17 }
+ })
+ } Else {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKD, 0 },
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKA, 0 },
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKB, 0 }
+ })
+
+ }
+
+ }
+}
+
+Device (RP08)
+{
+ NAME(_ADR, 0x001c0007) // FIXME: Have a macro for PCI Devices -> ACPI notation?
+ //#include "pcie_port.asl"
+ Method(_PRT)
+ {
+ If (PICM) {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, 0, 19 },
+ Package() { 0x0000ffff, 1, 0, 16 },
+ Package() { 0x0000ffff, 2, 0, 17 },
+ Package() { 0x0000ffff, 3, 0, 18 }
+ })
+ } Else {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 },
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKA, 0 },
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKC, 0 }
+ })
+
+ }
+
+ }
+}
+
+
diff --git a/src/southbridge/intel/bd82x6x/acpi/sata.asl b/src/southbridge/intel/bd82x6x/acpi/sata.asl
new file mode 100644
index 0000000000..e0c336ac5d
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/acpi/sata.asl
@@ -0,0 +1,83 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+// Intel SATA Controller 0:1f.2
+
+// Note: Some BIOSes put the S-ATA code into an SSDT to make it easily
+// pluggable
+
+Device (SATA)
+{
+ Name (_ADR, 0x001f0002)
+
+ Device (PRID)
+ {
+ Name (_ADR, 0)
+
+ // Get Timing Mode
+ Method (_GTM)
+ {
+ Name(PBUF, Buffer(20) {
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00 })
+
+ CreateDwordField (PBUF, 0, PIO0)
+ CreateDwordField (PBUF, 4, DMA0)
+ CreateDwordField (PBUF, 8, PIO1)
+ CreateDwordField (PBUF, 12, DMA1)
+ CreateDwordField (PBUF, 16, FLAG)
+
+ // TODO fill return structure
+
+ Return (PBUF)
+ }
+
+ // Set Timing Mode
+ Method (_STM, 3)
+ {
+ CreateDwordField (Arg0, 0, PIO0)
+ CreateDwordField (Arg0, 4, DMA0)
+ CreateDwordField (Arg0, 8, PIO1)
+ CreateDwordField (Arg0, 12, DMA1)
+ CreateDwordField (Arg0, 16, FLAG)
+
+ // TODO: Do the deed
+ }
+
+ Device (DSK0)
+ {
+ Name (_ADR, 0)
+ // TODO: _RMV ?
+ // TODO: _GTF ?
+ }
+
+ Device (DSK1)
+ {
+ Name (_ADR, 1)
+
+ // TODO: _RMV ?
+ // TODO: _GTF ?
+ }
+
+ }
+}
+
diff --git a/src/southbridge/intel/bd82x6x/acpi/sleepstates.asl b/src/southbridge/intel/bd82x6x/acpi/sleepstates.asl
new file mode 100644
index 0000000000..06bfcb6a58
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/acpi/sleepstates.asl
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Name(\_S0, Package(){0x0,0x0,0x0,0x0})
+// Name(\_S1, Package(){0x1,0x1,0x0,0x0})
+Name(\_S3, Package(){0x5,0x5,0x0,0x0})
+Name(\_S4, Package(){0x6,0x6,0x0,0x0})
+Name(\_S5, Package(){0x7,0x7,0x0,0x0})
+
diff --git a/src/southbridge/intel/bd82x6x/acpi/smbus.asl b/src/southbridge/intel/bd82x6x/acpi/smbus.asl
new file mode 100644
index 0000000000..4409308325
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/acpi/smbus.asl
@@ -0,0 +1,242 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+// Intel SMBus Controller 0:1f.3
+
+Device (SBUS)
+{
+ Name (_ADR, 0x001f0003)
+
+#ifdef ENABLE_SMBUS_METHODS
+ OperationRegion (SMBP, PCI_Config, 0x00, 0x100)
+ Field(SMBP, DWordAcc, NoLock, Preserve)
+ {
+ Offset(0x40),
+ , 2,
+ I2CE, 1
+ }
+
+ OperationRegion (SMBI, SystemIO, SMBUS_IO_BASE, 0x20)
+ Field (SMBI, ByteAcc, NoLock, Preserve)
+ {
+ HSTS, 8, // Host Status
+ , 8,
+ HCNT, 8, // Host Control
+ HCMD, 8, // Host Command
+ TXSA, 8, // Transmit Slave Address
+ DAT0, 8, // Host Data 0
+ DAT1, 8, // Host Data 1
+ HBDB, 8, // Host Block Data Byte
+ PECK, 8, // Packet Error Check
+ RXSA, 8, // Receive Slave Address
+ RXDA, 16, // Receive Slave Data
+ AUXS, 8, // Auxiliary Status
+ AUXC, 8, // Auxiliary Control
+ SLPC, 8, // SMLink Pin Control
+ SBPC, 8, // SMBus Pin Control
+ SSTS, 8, // Slave Status
+ SCMD, 8, // Slave Command
+ NADR, 8, // Notify Device Address
+ NDLB, 8, // Notify Data Low Byte
+ NDLH, 8, // Notify Data High Byte
+ }
+
+ // Kill all SMBus communication
+ Method (KILL, 0, Serialized)
+ {
+ Or (HCNT, 0x02, HCNT) // Send Kill
+ Or (HSTS, 0xff, HSTS) // Clean Status
+ }
+
+ // Check if last operation completed
+ // return Failure = 0, Success = 1
+ Method (CMPL, 0, Serialized)
+ {
+ Store (4000, Local0) // Timeout 200ms in 50us steps
+ While (Local0) {
+ If (And(HSTS, 0x02)) { // Completion Status?
+ Return (1) // Operation Completed
+ } Else {
+ Stall (50)
+ Decrement (Local0)
+ If (LEqual(Local0, 0)) {
+ KILL()
+ }
+ }
+ }
+
+ Return (0) // Failure
+ }
+
+
+ // Wait for SMBus to become ready
+ Method (SRDY, 0, Serialized)
+ {
+ Store (200, Local0) // Timeout 200ms
+ While (Local0) {
+ If (And(HSTS, 0x40)) { // IN_USE?
+ Sleep(1) // Wait 1ms
+ Decrement(Local0) // timeout--
+ If (LEqual(Local0, 0)) {
+ Return (1)
+ }
+ } Else {
+ Store (0, Local0) // We're ready
+ }
+ }
+
+ Store (4000, Local0) // Timeout 200ms (50us * 4000)
+ While (Local0) {
+ If (And (HSTS, 0x01)) { // Host Busy?
+ Stall(50) // Wait 50us
+ Decrement(Local0) // timeout--
+ If (LEqual(Local0, 0)) {
+ KILL()
+ }
+ } Else {
+ Return (0) // Success
+ }
+ }
+
+ Return (1) // Failure
+ }
+
+ // SMBus Send Byte
+ // Arg0: Address
+ // Arg1: Data
+ // Return: 1 = Success, 0=Failure
+
+ Method (SSXB, 2, Serialized)
+ {
+
+ // Is the SMBus Controller Ready?
+ If (SRDY()) {
+ Return (0)
+ }
+
+ // Send Byte
+ Store (0, I2CE) // SMBus Enable
+ Store (0xbf, HSTS)
+ Store (Arg0, TXSA) // Write Address
+ Store (Arg1, HCMD) // Write Data
+
+ Store (0x48, HCNT) // Start + Byte Data Protocol
+
+ If (CMPL()) {
+ Or (HSTS, 0xff, HSTS) // Clean up
+ Return (1) // Success
+ }
+
+ Return (0)
+ }
+
+
+ // SMBus Receive Byte
+ // Arg0: Address
+ // Return: 0xffff = Failure, Data (8bit) = Success
+
+ Method (SRXB, 2, Serialized)
+ {
+
+ // Is the SMBus Controller Ready?
+ If (SRDY()) {
+ Return (0xffff)
+ }
+
+ // Receive Byte
+ Store (0, I2CE) // SMBus Enable
+ Store (0xbf, HSTS)
+ Store (Or (Arg0, 1), TXSA) // Write Address
+
+ Store (0x44, HCNT) // Start
+
+ If (CMPL()) {
+ Or (HSTS, 0xff, HSTS) // Clean up
+ Return (DAT0) // Success
+ }
+
+ Return (0xffff)
+ }
+
+
+ // SMBus Write Byte
+ // Arg0: Address
+ // Arg1: Command
+ // Arg2: Data
+ // Return: 1 = Success, 0=Failure
+
+ Method (SWRB, 3, Serialized)
+ {
+
+ // Is the SMBus Controller Ready?
+ If (SRDY()) {
+ Return (0)
+ }
+
+ // Send Byte
+ Store (0, I2CE) // SMBus Enable
+ Store (0xbf, HSTS)
+ Store (Arg0, TXSA) // Write Address
+ Store (Arg1, HCMD) // Write Command
+ Store (Arg2, DAT0) // Write Data
+
+ Store (0x48, HCNT) // Start + Byte Protocol
+
+ If (CMPL()) {
+ Or (HSTS, 0xff, HSTS) // Clean up
+ Return (1) // Success
+ }
+
+ Return (0)
+ }
+
+
+ // SMBus Read Byte
+ // Arg0: Address
+ // Arg1: Command
+ // Return: 0xffff = Failure, Data (8bit) = Success
+
+ Method (SRDB, 2, Serialized)
+ {
+
+ // Is the SMBus Controller Ready?
+ If (SRDY()) {
+ Return (0xffff)
+ }
+
+ // Receive Byte
+ Store (0, I2CE) // SMBus Enable
+ Store (0xbf, HSTS)
+ Store (Or (Arg0, 1), TXSA) // Write Address
+ Store (Arg1, HCMD) // Command
+
+ Store (0x48, HCNT) // Start
+
+ If (CMPL()) {
+ Or (HSTS, 0xff, HSTS) // Clean up
+ Return (DAT0) // Success
+ }
+
+ Return (0xffff)
+ }
+#endif
+}
+
diff --git a/src/southbridge/intel/bd82x6x/acpi/usb.asl b/src/southbridge/intel/bd82x6x/acpi/usb.asl
new file mode 100644
index 0000000000..cf3e6a049f
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/acpi/usb.asl
@@ -0,0 +1,91 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* Intel Cougar Point USB support */
+
+// EHCI Controller 0:1d.0
+
+Device (EHC1)
+{
+ Name(_ADR, 0x001d0000)
+
+ Name (_PRW, Package(){ 13, 4 }) // Power Resources for Wake
+
+ // Leave USB ports on for to allow Wake from USB
+
+ Method(_S3D,0) // Highest D State in S3 State
+ {
+ Return (2)
+ }
+
+ Method(_S4D,0) // Highest D State in S4 State
+ {
+ Return (2)
+ }
+
+ Device (HUB7)
+ {
+ Name (_ADR, 0x00000000)
+
+ // How many are there?
+ Device (PRT1) { Name (_ADR, 1) } // USB Port 0
+ Device (PRT2) { Name (_ADR, 2) } // USB Port 1
+ Device (PRT3) { Name (_ADR, 3) } // USB Port 2
+ Device (PRT4) { Name (_ADR, 4) } // USB Port 3
+ Device (PRT5) { Name (_ADR, 5) } // USB Port 4
+ Device (PRT6) { Name (_ADR, 6) } // USB Port 5
+ }
+}
+
+// EHCI #2 Controller 0:1a.0
+
+Device (EHC2)
+{
+ Name(_ADR, 0x001a0000)
+
+ Name (_PRW, Package(){ 13, 4 }) // Power Resources for Wake
+
+ // Leave USB ports on for to allow Wake from USB
+
+ Method(_S3D,0) // Highest D State in S3 State
+ {
+ Return (2)
+ }
+
+ Method(_S4D,0) // Highest D State in S4 State
+ {
+ Return (2)
+ }
+
+ Device (HUB7)
+ {
+ Name (_ADR, 0x00000000)
+
+ // How many are there?
+ Device (PRT1) { Name (_ADR, 1) } // USB Port 0
+ Device (PRT2) { Name (_ADR, 2) } // USB Port 1
+ Device (PRT3) { Name (_ADR, 3) } // USB Port 2
+ Device (PRT4) { Name (_ADR, 4) } // USB Port 3
+ Device (PRT5) { Name (_ADR, 5) } // USB Port 4
+ Device (PRT6) { Name (_ADR, 6) } // USB Port 5
+ }
+}
+
diff --git a/src/southbridge/intel/bd82x6x/azalia.c b/src/southbridge/intel/bd82x6x/azalia.c
new file mode 100644
index 0000000000..5a83e38535
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/azalia.c
@@ -0,0 +1,367 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include <delay.h>
+#include "pch.h"
+
+#define HDA_ICII_REG 0x68
+#define HDA_ICII_BUSY (1 << 0)
+#define HDA_ICII_VALID (1 << 1)
+
+typedef struct southbridge_intel_bd82x6x_config config_t;
+
+static int set_bits(u32 port, u32 mask, u32 val)
+{
+ u32 reg32;
+ int count;
+
+ /* Write (val & mask) to port */
+ val &= mask;
+ reg32 = read32(port);
+ reg32 &= ~mask;
+ reg32 |= val;
+ write32(port, reg32);
+
+ /* Wait for readback of register to
+ * match what was just written to it
+ */
+ count = 50;
+ do {
+ /* Wait 1ms based on BKDG wait time */
+ mdelay(1);
+ reg32 = read32(port);
+ reg32 &= mask;
+ } while ((reg32 != val) && --count);
+
+ /* Timeout occurred */
+ if (!count)
+ return -1;
+ return 0;
+}
+
+static int codec_detect(u32 base)
+{
+ u8 reg8;
+
+ /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
+ if (set_bits(base + 0x08, 1, 1) == -1)
+ goto no_codec;
+
+ /* Write back the value once reset bit is set. */
+ write16(base + 0x0, read16(base + 0x0));
+
+ /* Read in Codec location (BAR + 0xe)[2..0]*/
+ reg8 = read8(base + 0xe);
+ reg8 &= 0x0f;
+ if (!reg8)
+ goto no_codec;
+
+ return reg8;
+
+no_codec:
+ /* Codec Not found */
+ /* Put HDA back in reset (BAR + 0x8) [0] */
+ set_bits(base + 0x08, 1, 0);
+ printk(BIOS_DEBUG, "Azalia: No codec!\n");
+ return 0;
+}
+
+const u32 * cim_verb_data = NULL;
+u32 cim_verb_data_size = 0;
+
+static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb)
+{
+ int idx=0;
+
+ while (idx < (cim_verb_data_size / sizeof(u32))) {
+ u32 verb_size = 4 * cim_verb_data[idx+2]; // in u32
+ if (cim_verb_data[idx] != viddid) {
+ idx += verb_size + 3; // skip verb + header
+ continue;
+ }
+ *verb = &cim_verb_data[idx+3];
+ return verb_size;
+ }
+
+ /* Not all codecs need to load another verb */
+ return 0;
+}
+
+/**
+ * Wait 50usec for the codec to indicate it is ready
+ * no response would imply that the codec is non-operative
+ */
+
+static int wait_for_ready(u32 base)
+{
+ /* Use a 50 usec timeout - the Linux kernel uses the
+ * same duration */
+
+ int timeout = 50;
+
+ while(timeout--) {
+ u32 reg32 = read32(base + HDA_ICII_REG);
+ if (!(reg32 & HDA_ICII_BUSY))
+ return 0;
+ udelay(1);
+ }
+
+ return -1;
+}
+
+/**
+ * Wait 50usec for the codec to indicate that it accepted
+ * the previous command. No response would imply that the code
+ * is non-operative
+ */
+
+static int wait_for_valid(u32 base)
+{
+ u32 reg32;
+
+ /* Send the verb to the codec */
+ reg32 = read32(base + HDA_ICII_REG);
+ reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID;
+ write32(base + HDA_ICII_REG, reg32);
+
+ /* Use a 50 usec timeout - the Linux kernel uses the
+ * same duration */
+
+ int timeout = 50;
+ while(timeout--) {
+ reg32 = read32(base + HDA_ICII_REG);
+ if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
+ HDA_ICII_VALID)
+ return 0;
+ udelay(1);
+ }
+
+ return -1;
+}
+
+static void codec_init(struct device *dev, u32 base, int addr)
+{
+ u32 reg32;
+ const u32 *verb;
+ u32 verb_size;
+ int i;
+
+ printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr);
+
+ /* 1 */
+ if (wait_for_ready(base) == -1) {
+ printk(BIOS_DEBUG, " codec not ready.\n");
+ return;
+ }
+
+ reg32 = (addr << 28) | 0x000f0000;
+ write32(base + 0x60, reg32);
+
+ if (wait_for_valid(base) == -1) {
+ printk(BIOS_DEBUG, " codec not valid.\n");
+ return;
+ }
+
+ reg32 = read32(base + 0x64);
+
+ /* 2 */
+ printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32);
+ verb_size = find_verb(dev, reg32, &verb);
+
+ if (!verb_size) {
+ printk(BIOS_DEBUG, "Azalia: No verb!\n");
+ return;
+ }
+ printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size);
+
+ /* 3 */
+ for (i = 0; i < verb_size; i++) {
+ if (wait_for_ready(base) == -1)
+ return;
+
+ write32(base + 0x60, verb[i]);
+
+ if (wait_for_valid(base) == -1)
+ return;
+ }
+ printk(BIOS_DEBUG, "Azalia: verb loaded.\n");
+}
+
+static void codecs_init(struct device *dev, u32 base, u32 codec_mask)
+{
+ int i;
+ for (i = 3; i >= 0; i--) {
+ if (codec_mask & (1 << i))
+ codec_init(dev, base, i);
+ }
+}
+
+static void azalia_init(struct device *dev)
+{
+ u32 base;
+ struct resource *res;
+ u32 codec_mask;
+ u8 reg8;
+ u16 reg16;
+ u32 reg32;
+
+ /* Find base address */
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (!res)
+ return;
+
+ // NOTE this will break as soon as the Azalia get's a bar above
+ // 4G. Is there anything we can do about it?
+ base = (u32)res->base;
+ printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base);
+
+ if (RCBA32(0x2030) & (1 << 31)) {
+ reg32 = pci_mmio_read_config32(dev, 0x120);
+ reg32 &= 0xf8ffff01;
+ reg32 |= (1 << 24); // 25 for server
+ reg32 |= RCBA32(0x2030) & 0xfe;
+ pci_mmio_write_config32(dev, 0x120, reg32);
+
+ reg16 = pci_mmio_read_config16(dev, 0x78);
+ reg16 &= ~(1 << 11);
+ pci_mmio_write_config16(dev, 0x78, reg16);
+ } else
+ printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n");
+
+ reg32 = pci_mmio_read_config32(dev, 0x114);
+ reg32 &= ~0xfe;
+ pci_mmio_write_config32(dev, 0x114, reg32);
+
+ // Set VCi enable bit
+ if (pci_mmio_read_config32(dev, 0x120) & ((1 << 24) |
+ (1 << 25) | (1 << 26))) {
+ reg32 = pci_mmio_read_config32(dev, 0x120);
+ reg32 |= (1 << 31);
+ pci_mmio_write_config32(dev, 0x120, reg32);
+ }
+
+ // Enable HDMI codec:
+ reg32 = pci_read_config32(dev, 0xc4);
+ reg32 |= (1 << 1);
+ pci_write_config32(dev, 0xc4, reg32);
+
+ reg8 = pci_read_config8(dev, 0x43);
+ reg8 |= (1 << 6);
+ pci_write_config8(dev, 0x43, reg8);
+
+ /* Additional programming steps */
+ reg32 = pci_read_config32(dev, 0xc4);
+ reg32 |= (1 << 13) | (1 << 10);
+ pci_write_config32(dev, 0xc4, reg32);
+
+ reg32 = pci_read_config32(dev, 0xd0);
+ reg32 &= ~(1 << 31);
+ pci_write_config32(dev, 0xd0, reg32);
+
+ /* Additional programming steps */
+ reg32 = pci_read_config32(dev, 0xc4);
+ reg32 |= (1 << 13);
+ pci_write_config32(dev, 0xc4, reg32);
+
+ reg32 = pci_read_config32(dev, 0xc4);
+ reg32 |= (1 << 10);
+ pci_write_config32(dev, 0xc4, reg32);
+
+ reg32 = pci_read_config32(dev, 0xd0);
+ reg32 &= ~(1 << 31);
+ pci_write_config32(dev, 0xd0, reg32);
+
+ /* Set Bus Master */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
+
+ pci_write_config8(dev, 0x3c, 0x0a); // unused?
+
+ /* Codec Initialization Programming Sequence */
+ reg32 = read32(base + 0x08);
+ reg32 |= (1 << 0);
+ write32(base + 0x08, reg32);
+
+ //
+ reg8 = pci_read_config8(dev, 0x40); // Audio Control
+ reg8 |= 1; // Select Azalia mode. This needs to be controlled via devicetree.cb
+ pci_write_config8(dev, 0x40, reg8);
+
+ reg8 = pci_read_config8(dev, 0x4d); // Docking Status
+ reg8 &= ~(1 << 7); // Docking not supported
+ pci_write_config8(dev, 0x4d, reg8);
+
+ codec_mask = codec_detect(base);
+
+ if (codec_mask) {
+ printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask);
+ codecs_init(dev, base, codec_mask);
+ }
+
+ /* Enable dynamic clock gating */
+ reg8 = pci_read_config8(dev, 0x43);
+ reg8 &= ~0x7;
+ reg8 |= (1 << 2) | (1 << 0);
+ pci_write_config8(dev, 0x43, reg8);
+}
+
+static void azalia_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations azalia_pci_ops = {
+ .set_subsystem = azalia_set_subsystem,
+};
+
+static struct device_operations azalia_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = azalia_init,
+ .scan_bus = 0,
+ .ops_pci = &azalia_pci_ops,
+};
+
+static const struct pci_driver azalia_0 __pci_driver = {
+ .ops = &azalia_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c20,
+};
+
+static const struct pci_driver azalia_1 __pci_driver = {
+ .ops = &azalia_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1e20,
+};
+
diff --git a/src/southbridge/intel/bd82x6x/bootblock.c b/src/southbridge/intel/bd82x6x/bootblock.c
new file mode 100644
index 0000000000..686e820e03
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/bootblock.c
@@ -0,0 +1,73 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "pch.h"
+
+static void store_initial_timestamp(void)
+{
+ /* On Cougar Point we have two 32bit scratchpad registers available:
+ * D0:F0 0xdc (SKPAD)
+ * D31:F2 0xd0 (SATA SP)
+ */
+ tsc_t tsc = rdtsc();
+ pci_write_config32(PCI_DEV(0, 0x00, 0), 0xdc, tsc.lo);
+ pci_write_config32(PCI_DEV(0, 0x1f, 2), 0xd0, tsc.hi);
+}
+
+/*
+ * Enable Prefetching and Caching.
+ */
+static void enable_spi_prefetch(void)
+{
+ u8 reg8;
+ device_t dev;
+
+ dev = PCI_DEV(0, 0x1f, 0);
+
+ reg8 = pci_read_config8(dev, 0xdc);
+ reg8 &= ~(3 << 2);
+ reg8 |= (2 << 2); /* Prefetching and Caching Enabled */
+ pci_write_config8(dev, 0xdc, reg8);
+}
+
+static void enable_port80_on_lpc(void)
+{
+ device_t dev = PCI_DEV(0, 0x1f, 0);
+
+ /* Enable port 80 POST on LPC */
+ pci_write_config32(dev, RCBA, DEFAULT_RCBA | 1);
+#if 0
+ RCBA32(GCS) &= (~0x04);
+#else
+ volatile u32 *gcs = (volatile u32 *)(DEFAULT_RCBA + GCS);
+ u32 reg32 = *gcs;
+ reg32 = reg32 & ~0x04;
+ *gcs = reg32;
+ post_code(0x01);
+#endif
+}
+
+static void bootblock_southbridge_init(void)
+{
+#if CONFIG_COLLECT_TIMESTAMPS
+ store_initial_timestamp();
+#endif
+ enable_spi_prefetch();
+ enable_port80_on_lpc();
+}
diff --git a/src/southbridge/intel/bd82x6x/chip.h b/src/southbridge/intel/bd82x6x/chip.h
new file mode 100644
index 0000000000..2786d72359
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/chip.h
@@ -0,0 +1,79 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SOUTHBRIDGE_INTEL_BD82X6X_CHIP_H
+#define SOUTHBRIDGE_INTEL_BD82X6X_CHIP_H
+
+struct southbridge_intel_bd82x6x_config {
+ /**
+ * Interrupt Routing configuration
+ * If bit7 is 1, the interrupt is disabled.
+ */
+ uint8_t pirqa_routing;
+ uint8_t pirqb_routing;
+ uint8_t pirqc_routing;
+ uint8_t pirqd_routing;
+ uint8_t pirqe_routing;
+ uint8_t pirqf_routing;
+ uint8_t pirqg_routing;
+ uint8_t pirqh_routing;
+
+ /**
+ * GPI Routing configuration
+ *
+ * Only the lower two bits have a meaning:
+ * 00: No effect
+ * 01: SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+ * 10: SCI (if corresponding GPIO_EN bit is also set)
+ * 11: reserved
+ */
+ uint8_t gpi0_routing;
+ uint8_t gpi1_routing;
+ uint8_t gpi2_routing;
+ uint8_t gpi3_routing;
+ uint8_t gpi4_routing;
+ uint8_t gpi5_routing;
+ uint8_t gpi6_routing;
+ uint8_t gpi7_routing;
+ uint8_t gpi8_routing;
+ uint8_t gpi9_routing;
+ uint8_t gpi10_routing;
+ uint8_t gpi11_routing;
+ uint8_t gpi12_routing;
+ uint8_t gpi13_routing;
+ uint8_t gpi14_routing;
+ uint8_t gpi15_routing;
+
+ uint32_t gpe0_en;
+ uint16_t alt_gp_smi_en;
+
+ /* IDE configuration */
+ uint32_t ide_legacy_combined;
+ uint32_t sata_ahci;
+ uint8_t sata_port_map;
+
+ uint32_t gen1_dec;
+ uint32_t gen2_dec;
+ uint32_t gen3_dec;
+ uint32_t gen4_dec;
+};
+
+extern struct chip_operations southbridge_intel_bd82x6x_ops;
+
+#endif /* SOUTHBRIDGE_INTEL_BD82X6X_CHIP_H */
diff --git a/src/southbridge/intel/bd82x6x/early_me.c b/src/southbridge/intel/bd82x6x/early_me.c
new file mode 100644
index 0000000000..5b266cc10c
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/early_me.c
@@ -0,0 +1,201 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/hlt.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <delay.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include "me.h"
+#include "pch.h"
+
+static const char *me_ack_values[] = {
+ [ME_HFS_ACK_NO_DID] = "No DID Ack received",
+ [ME_HFS_ACK_RESET] = "Non-power cycle reset",
+ [ME_HFS_ACK_PWR_CYCLE] = "Power cycle reset",
+ [ME_HFS_ACK_S3] = "Go to S3",
+ [ME_HFS_ACK_S4] = "Go to S4",
+ [ME_HFS_ACK_S5] = "Go to S5",
+ [ME_HFS_ACK_GBL_RESET] = "Global Reset",
+ [ME_HFS_ACK_CONTINUE] = "Continue to boot"
+};
+
+static inline void pci_read_dword_ptr(void *ptr, int offset)
+{
+ u32 dword = pci_read_config32(PCH_ME_DEV, offset);
+ memcpy(ptr, &dword, sizeof(dword));
+}
+
+static inline void pci_write_dword_ptr(void *ptr, int offset)
+{
+ u32 dword = 0;
+ memcpy(&dword, ptr, sizeof(dword));
+ pci_write_config32(PCH_ME_DEV, offset, dword);
+}
+
+void intel_early_me_status(void)
+{
+ struct me_hfs hfs;
+ struct me_gmes gmes;
+
+ pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+ pci_read_dword_ptr(&gmes, PCI_ME_GMES);
+
+ intel_me_status(&hfs, &gmes);
+}
+
+int intel_early_me_init(void)
+{
+ int count;
+ struct me_uma uma;
+ struct me_hfs hfs;
+
+ printk(BIOS_INFO, "Intel ME early init\n");
+
+ /* Wait for ME UMA SIZE VALID bit to be set */
+ for (count = ME_RETRY; count > 0; --count) {
+ pci_read_dword_ptr(&uma, PCI_ME_UMA);
+ if (uma.valid)
+ break;
+ udelay(ME_DELAY);
+ }
+ if (!count) {
+ printk(BIOS_ERR, "ERROR: ME is not ready!\n");
+ return -1;
+ }
+
+ /* Check for valid firmware */
+ pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+ if (hfs.fpt_bad) {
+ printk(BIOS_WARNING, "WARNING: ME has bad firmware\n");
+ return -1;
+ }
+
+ printk(BIOS_INFO, "Intel ME firmware is ready\n");
+ return 0;
+}
+
+int intel_early_me_uma_size(void)
+{
+ struct me_uma uma;
+
+ pci_read_dword_ptr(&uma, PCI_ME_UMA);
+ if (uma.valid) {
+ printk(BIOS_DEBUG, "ME: Requested %uMB UMA\n", uma.size);
+ return uma.size;
+ }
+
+ printk(BIOS_DEBUG, "ME: Invalid UMA size\n");
+ return 0;
+}
+
+static inline void set_global_reset(int enable)
+{
+ u32 etr3 = pci_read_config32(PCH_LPC_DEV, ETR3);
+
+ /* Clear CF9 Without Resume Well Reset Enable */
+ etr3 &= ~ETR3_CWORWRE;
+
+ /* CF9GR indicates a Global Reset */
+ if (enable)
+ etr3 |= ETR3_CF9GR;
+ else
+ etr3 &= ~ETR3_CF9GR;
+
+ pci_write_config32(PCH_LPC_DEV, ETR3, etr3);
+}
+
+int intel_early_me_init_done(u8 status)
+{
+ u8 reset;
+ int count;
+ u32 mebase_l, mebase_h;
+ struct me_hfs hfs;
+ struct me_did did = {
+ .init_done = ME_INIT_DONE,
+ .status = status
+ };
+
+ /* MEBASE from MESEG_BASE[35:20] */
+ mebase_l = pci_read_config32(PCI_CPU_DEVICE, PCI_CPU_MEBASE_L);
+ mebase_h = pci_read_config32(PCI_CPU_DEVICE, PCI_CPU_MEBASE_H) & 0xf;
+ did.uma_base = (mebase_l >> 20) | (mebase_h << 12);
+
+ /* Send message to ME */
+ printk(BIOS_DEBUG, "ME: Sending Init Done with status: %d, "
+ "UMA base: 0x%04x\n", status, did.uma_base);
+
+ pci_write_dword_ptr(&did, PCI_ME_H_GS);
+
+ /* Must wait for ME acknowledgement */
+ for (count = ME_RETRY; count > 0; --count) {
+ pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+ if (hfs.bios_msg_ack)
+ break;
+ udelay(ME_DELAY);
+ }
+ if (!count) {
+ printk(BIOS_ERR, "ERROR: ME failed to respond\n");
+ return -1;
+ }
+
+ /* Return the requested BIOS action */
+ printk(BIOS_NOTICE, "ME: Requested BIOS Action: %s\n",
+ me_ack_values[hfs.ack_data]);
+
+ /* Check status after acknowledgement */
+ intel_early_me_status();
+
+ reset = 0;
+ switch (hfs.ack_data) {
+ case ME_HFS_ACK_CONTINUE:
+ /* Continue to boot */
+ return 0;
+ case ME_HFS_ACK_RESET:
+ /* Non-power cycle reset */
+ set_global_reset(0);
+ reset = 0x06;
+ break;
+ case ME_HFS_ACK_PWR_CYCLE:
+ /* Power cycle reset */
+ set_global_reset(0);
+ reset = 0x0e;
+ break;
+ case ME_HFS_ACK_GBL_RESET:
+ /* Global reset */
+ set_global_reset(1);
+ reset = 0x0e;
+ break;
+ case ME_HFS_ACK_S3:
+ case ME_HFS_ACK_S4:
+ case ME_HFS_ACK_S5:
+ break;
+ }
+
+ /* Perform the requested reset */
+ if (reset) {
+ outb(reset, 0xcf9);
+ hlt();
+ }
+ return -1;
+}
diff --git a/src/southbridge/intel/bd82x6x/early_smbus.c b/src/southbridge/intel/bd82x6x/early_smbus.c
new file mode 100644
index 0000000000..b13369af59
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/early_smbus.c
@@ -0,0 +1,63 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <device/pci_ids.h>
+#include <device/pci_def.h>
+#include "pch.h"
+#include "smbus.h"
+
+void enable_smbus(void)
+{
+ device_t dev;
+
+ /* Set the SMBus device statically. */
+ dev = PCI_DEV(0x0, 0x1f, 0x3);
+
+ /* Check to make sure we've got the right device. */
+ if (pci_read_config16(dev, 0x0) != 0x8086) {
+ die("SMBus controller not found!");
+ }
+
+ /* Set SMBus I/O base. */
+ pci_write_config32(dev, SMB_BASE,
+ SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
+
+ /* Set SMBus enable. */
+ pci_write_config8(dev, HOSTC, HST_EN);
+
+ /* Set SMBus I/O space enable. */
+ pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
+
+ /* Disable interrupt generation. */
+ outb(0, SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* Clear any lingering errors, so transactions can run. */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+ print_debug("SMBus controller enabled.\n");
+}
+
+int smbus_read_byte(unsigned device, unsigned address)
+{
+ return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
+}
+
diff --git a/src/southbridge/intel/bd82x6x/early_usb.c b/src/southbridge/intel/bd82x6x/early_usb.c
new file mode 100644
index 0000000000..95906e3bfc
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/early_usb.c
@@ -0,0 +1,57 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <device/pci_ids.h>
+#include <device/pci_def.h>
+#include "pch.h"
+
+#define PCH_EHCI1_TEMP_BAR0 0xe8000000
+#define PCH_EHCI2_TEMP_BAR0 0xe8000400
+
+/*
+ * Setup USB controller MMIO BAR to prevent the
+ * reference code from resetting the controller.
+ *
+ * The BAR will be re-assigned during device
+ * enumeration so these are only temporary.
+ */
+void enable_usb_bar(void)
+{
+ device_t usb0 = PCH_EHCI1_DEV;
+ device_t usb1 = PCH_EHCI2_DEV;
+ u32 cmd;
+
+ /* USB Controller 1 */
+ pci_write_config32(usb0, PCI_BASE_ADDRESS_0,
+ PCH_EHCI1_TEMP_BAR0);
+ cmd = pci_read_config32(usb0, PCI_COMMAND);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(usb0, PCI_COMMAND, cmd);
+
+ /* USB Controller 1 */
+ pci_write_config32(usb1, PCI_BASE_ADDRESS_0,
+ PCH_EHCI1_TEMP_BAR0);
+ cmd = pci_read_config32(usb1, PCI_COMMAND);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(usb1, PCI_COMMAND, cmd);
+}
diff --git a/src/southbridge/intel/bd82x6x/finalize.c b/src/southbridge/intel/bd82x6x/finalize.c
new file mode 100644
index 0000000000..ed1ebf7a9a
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/finalize.c
@@ -0,0 +1,56 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <northbridge/intel/sandybridge/pcie_config.c>
+#include "pch.h"
+
+void intel_pch_finalize_smm(void)
+{
+ /* Set SPI opcode menu */
+ RCBA16(0x3894) = SPI_OPPREFIX;
+ RCBA16(0x3896) = SPI_OPTYPE;
+ RCBA32(0x3898) = SPI_OPMENU_LOWER;
+ RCBA32(0x389c) = SPI_OPMENU_UPPER;
+
+ /* Lock SPIBAR */
+ RCBA32_OR(0x3804, (1 << 15));
+
+ /* TCLOCKDN: TC Lockdown */
+ RCBA32_OR(0x0050, (1 << 31));
+
+ /* BIOS Interface Lockdown */
+ RCBA32_OR(0x3410, (1 << 0));
+
+ /* Function Disable SUS Well Lockdown */
+ RCBA_AND_OR(8, 0x3420, ~0U, (1 << 7));
+
+ /* Global SMI Lock */
+ pcie_or_config16(PCH_LPC_DEV, 0xa0, 1 << 4);
+
+ /* GEN_PMCON Lock */
+ pcie_or_config8(PCH_LPC_DEV, 0xa6, (1 << 1) | (1 << 2));
+
+ /* R/WO registers */
+ RCBA32(0x21a4) = RCBA32(0x21a4);
+ pcie_write_config32(PCI_DEV(0, 27, 0), 0x74,
+ pcie_read_config32(PCI_DEV(0, 27, 0), 0x74));
+}
diff --git a/src/southbridge/intel/bd82x6x/gpio.c b/src/southbridge/intel/bd82x6x/gpio.c
new file mode 100644
index 0000000000..598726a0d5
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/gpio.c
@@ -0,0 +1,65 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+
+#include "pch.h"
+#include "gpio.h"
+
+void setup_pch_gpios(const struct pch_gpio_map *gpio)
+{
+ u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc;
+
+ /* GPIO Set 1 */
+ if (gpio->set1.level)
+ outl(*((u32*)gpio->set1.level), gpiobase + GP_LVL);
+ if (gpio->set1.mode)
+ outl(*((u32*)gpio->set1.mode), gpiobase + GPIO_USE_SEL);
+ if (gpio->set1.direction)
+ outl(*((u32*)gpio->set1.direction), gpiobase + GP_IO_SEL);
+ if (gpio->set1.reset)
+ outl(*((u32*)gpio->set1.reset), gpiobase + GP_RST_SEL1);
+ if (gpio->set1.invert)
+ outl(*((u32*)gpio->set1.invert), gpiobase + GPI_INV);
+ if (gpio->set1.blink)
+ outl(*((u32*)gpio->set1.blink), gpiobase + GPO_BLINK);
+
+ /* GPIO Set 2 */
+ if (gpio->set2.level)
+ outl(*((u32*)gpio->set2.level), gpiobase + GP_LVL2);
+ if (gpio->set2.mode)
+ outl(*((u32*)gpio->set2.mode), gpiobase + GPIO_USE_SEL2);
+ if (gpio->set2.direction)
+ outl(*((u32*)gpio->set2.direction), gpiobase + GP_IO_SEL2);
+ if (gpio->set2.reset)
+ outl(*((u32*)gpio->set2.reset), gpiobase + GP_RST_SEL2);
+
+ /* GPIO Set 3 */
+ if (gpio->set3.level)
+ outl(*((u32*)gpio->set3.level), gpiobase + GP_LVL3);
+ if (gpio->set3.mode)
+ outl(*((u32*)gpio->set3.mode), gpiobase + GPIO_USE_SEL3);
+ if (gpio->set3.direction)
+ outl(*((u32*)gpio->set3.direction), gpiobase + GP_IO_SEL3);
+ if (gpio->set3.reset)
+ outl(*((u32*)gpio->set3.reset), gpiobase + GP_RST_SEL3);
+}
diff --git a/src/southbridge/intel/bd82x6x/gpio.h b/src/southbridge/intel/bd82x6x/gpio.h
new file mode 100644
index 0000000000..214947fc4b
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/gpio.h
@@ -0,0 +1,153 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef INTEL_BD82X6X_GPIO_H
+#define INTEL_BD82X6X_GPIO_H
+
+#define GPIO_MODE_NATIVE 0
+#define GPIO_MODE_GPIO 1
+#define GPIO_MODE_NONE 1
+
+#define GPIO_DIR_OUTPUT 0
+#define GPIO_DIR_INPUT 1
+
+#define GPIO_NO_INVERT 0
+#define GPIO_INVERT 1
+
+#define GPIO_LEVEL_LOW 0
+#define GPIO_LEVEL_HIGH 1
+
+#define GPIO_NO_BLINK 0
+#define GPIO_BLINK 1
+
+#define GPIO_RESET_PWROK 0
+#define GPIO_RESET_RSMRST 1
+
+struct pch_gpio_set1 {
+ u32 gpio0 : 1;
+ u32 gpio1 : 1;
+ u32 gpio2 : 1;
+ u32 gpio3 : 1;
+ u32 gpio4 : 1;
+ u32 gpio5 : 1;
+ u32 gpio6 : 1;
+ u32 gpio7 : 1;
+ u32 gpio8 : 1;
+ u32 gpio9 : 1;
+ u32 gpio10 : 1;
+ u32 gpio11 : 1;
+ u32 gpio12 : 1;
+ u32 gpio13 : 1;
+ u32 gpio14 : 1;
+ u32 gpio15 : 1;
+ u32 gpio16 : 1;
+ u32 gpio17 : 1;
+ u32 gpio18 : 1;
+ u32 gpio19 : 1;
+ u32 gpio20 : 1;
+ u32 gpio21 : 1;
+ u32 gpio22 : 1;
+ u32 gpio23 : 1;
+ u32 gpio24 : 1;
+ u32 gpio25 : 1;
+ u32 gpio26 : 1;
+ u32 gpio27 : 1;
+ u32 gpio28 : 1;
+ u32 gpio29 : 1;
+ u32 gpio30 : 1;
+ u32 gpio31 : 1;
+} __attribute__ ((packed));
+
+struct pch_gpio_set2 {
+ u32 gpio32 : 1;
+ u32 gpio33 : 1;
+ u32 gpio34 : 1;
+ u32 gpio35 : 1;
+ u32 gpio36 : 1;
+ u32 gpio37 : 1;
+ u32 gpio38 : 1;
+ u32 gpio39 : 1;
+ u32 gpio40 : 1;
+ u32 gpio41 : 1;
+ u32 gpio42 : 1;
+ u32 gpio43 : 1;
+ u32 gpio44 : 1;
+ u32 gpio45 : 1;
+ u32 gpio46 : 1;
+ u32 gpio47 : 1;
+ u32 gpio48 : 1;
+ u32 gpio49 : 1;
+ u32 gpio50 : 1;
+ u32 gpio51 : 1;
+ u32 gpio52 : 1;
+ u32 gpio53 : 1;
+ u32 gpio54 : 1;
+ u32 gpio55 : 1;
+ u32 gpio56 : 1;
+ u32 gpio57 : 1;
+ u32 gpio58 : 1;
+ u32 gpio59 : 1;
+ u32 gpio60 : 1;
+ u32 gpio61 : 1;
+ u32 gpio62 : 1;
+ u32 gpio63 : 1;
+} __attribute__ ((packed));
+
+struct pch_gpio_set3 {
+ u32 gpio64 : 1;
+ u32 gpio65 : 1;
+ u32 gpio66 : 1;
+ u32 gpio67 : 1;
+ u32 gpio68 : 1;
+ u32 gpio69 : 1;
+ u32 gpio70 : 1;
+ u32 gpio71 : 1;
+ u32 gpio72 : 1;
+ u32 gpio73 : 1;
+ u32 gpio74 : 1;
+ u32 gpio75 : 1;
+} __attribute__ ((packed));
+
+struct pch_gpio_map {
+ struct {
+ const struct pch_gpio_set1 *mode;
+ const struct pch_gpio_set1 *direction;
+ const struct pch_gpio_set1 *level;
+ const struct pch_gpio_set1 *reset;
+ const struct pch_gpio_set1 *invert;
+ const struct pch_gpio_set1 *blink;
+ } set1;
+ struct {
+ const struct pch_gpio_set2 *mode;
+ const struct pch_gpio_set2 *direction;
+ const struct pch_gpio_set2 *level;
+ const struct pch_gpio_set2 *reset;
+ } set2;
+ struct {
+ const struct pch_gpio_set3 *mode;
+ const struct pch_gpio_set3 *direction;
+ const struct pch_gpio_set3 *level;
+ const struct pch_gpio_set3 *reset;
+ } set3;
+};
+
+/* Configure GPIOs with mainboard provided settings */
+void setup_pch_gpios(const struct pch_gpio_map *gpio);
+
+#endif
diff --git a/src/southbridge/intel/bd82x6x/lpc.c b/src/southbridge/intel/bd82x6x/lpc.c
new file mode 100644
index 0000000000..1ecaf8fca9
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/lpc.c
@@ -0,0 +1,678 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <pc80/mc146818rtc.h>
+#include <pc80/isa-dma.h>
+#include <pc80/i8259.h>
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include <arch/acpi.h>
+#include <cpu/cpu.h>
+#include "pch.h"
+
+#define NMI_OFF 0
+
+#define ENABLE_ACPI_MODE_IN_COREBOOT 0
+#define TEST_SMM_FLASH_LOCKDOWN 0
+
+typedef struct southbridge_intel_bd82x6x_config config_t;
+
+static void pch_enable_apic(struct device *dev)
+{
+ int i;
+ u32 reg32;
+ volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR);
+ volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10);
+
+ /* Enable ACPI I/O and power management.
+ * Set SCI IRQ to IRQ9
+ */
+ pci_write_config8(dev, ACPI_CNTL, 0x80);
+
+ *ioapic_index = 0;
+ *ioapic_data = (1 << 25);
+
+ /* affirm full set of redirection table entries ("write once") */
+ *ioapic_index = 1;
+ reg32 = *ioapic_data;
+ *ioapic_index = 1;
+ *ioapic_data = reg32;
+
+ *ioapic_index = 0;
+ reg32 = *ioapic_data;
+ printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f);
+ if (reg32 != (1 << 25))
+ die("APIC Error\n");
+
+ printk(BIOS_SPEW, "Dumping IOAPIC registers\n");
+ for (i=0; i<3; i++) {
+ *ioapic_index = i;
+ printk(BIOS_SPEW, " reg 0x%04x:", i);
+ reg32 = *ioapic_data;
+ printk(BIOS_SPEW, " 0x%08x\n", reg32);
+ }
+
+ *ioapic_index = 3; /* Select Boot Configuration register. */
+ *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */
+}
+
+static void pch_enable_serial_irqs(struct device *dev)
+{
+ /* Set packet length and toggle silent mode bit for one frame. */
+ pci_write_config8(dev, SERIRQ_CNTL,
+ (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0));
+#if !CONFIG_SERIRQ_CONTINUOUS_MODE
+ pci_write_config8(dev, SERIRQ_CNTL,
+ (1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0));
+#endif
+}
+
+/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
+ * 0x00 - 0000 = Reserved
+ * 0x01 - 0001 = Reserved
+ * 0x02 - 0010 = Reserved
+ * 0x03 - 0011 = IRQ3
+ * 0x04 - 0100 = IRQ4
+ * 0x05 - 0101 = IRQ5
+ * 0x06 - 0110 = IRQ6
+ * 0x07 - 0111 = IRQ7
+ * 0x08 - 1000 = Reserved
+ * 0x09 - 1001 = IRQ9
+ * 0x0A - 1010 = IRQ10
+ * 0x0B - 1011 = IRQ11
+ * 0x0C - 1100 = IRQ12
+ * 0x0D - 1101 = Reserved
+ * 0x0E - 1110 = IRQ14
+ * 0x0F - 1111 = IRQ15
+ * PIRQ[n]_ROUT[7] - PIRQ Routing Control
+ * 0x80 - The PIRQ is not routed.
+ */
+
+static void pch_pirq_init(device_t dev)
+{
+ device_t irq_dev;
+ /* Get the chip configuration */
+ config_t *config = dev->chip_info;
+
+ pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing);
+ pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing);
+ pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing);
+ pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing);
+
+ pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing);
+ pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing);
+ pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing);
+ pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing);
+
+ /* Eric Biederman once said we should let the OS do this.
+ * I am not so sure anymore he was right.
+ */
+
+ for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
+ u8 int_pin=0, int_line=0;
+
+ if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI)
+ continue;
+
+ int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
+
+ switch (int_pin) {
+ case 1: /* INTA# */ int_line = config->pirqa_routing; break;
+ case 2: /* INTB# */ int_line = config->pirqb_routing; break;
+ case 3: /* INTC# */ int_line = config->pirqc_routing; break;
+ case 4: /* INTD# */ int_line = config->pirqd_routing; break;
+ }
+
+ if (!int_line)
+ continue;
+
+ pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
+ }
+}
+
+static void pch_gpi_routing(device_t dev)
+{
+ /* Get the chip configuration */
+ config_t *config = dev->chip_info;
+ u32 reg32 = 0;
+
+ /* An array would be much nicer here, or some
+ * other method of doing this.
+ */
+ reg32 |= (config->gpi0_routing & 0x03) << 0;
+ reg32 |= (config->gpi1_routing & 0x03) << 2;
+ reg32 |= (config->gpi2_routing & 0x03) << 4;
+ reg32 |= (config->gpi3_routing & 0x03) << 6;
+ reg32 |= (config->gpi4_routing & 0x03) << 8;
+ reg32 |= (config->gpi5_routing & 0x03) << 10;
+ reg32 |= (config->gpi6_routing & 0x03) << 12;
+ reg32 |= (config->gpi7_routing & 0x03) << 14;
+ reg32 |= (config->gpi8_routing & 0x03) << 16;
+ reg32 |= (config->gpi9_routing & 0x03) << 18;
+ reg32 |= (config->gpi10_routing & 0x03) << 20;
+ reg32 |= (config->gpi11_routing & 0x03) << 22;
+ reg32 |= (config->gpi12_routing & 0x03) << 24;
+ reg32 |= (config->gpi13_routing & 0x03) << 26;
+ reg32 |= (config->gpi14_routing & 0x03) << 28;
+ reg32 |= (config->gpi15_routing & 0x03) << 30;
+
+ pci_write_config32(dev, 0xb8, reg32);
+}
+
+static void pch_power_options(device_t dev)
+{
+ u8 reg8;
+ u16 reg16, pmbase;
+ u32 reg32;
+ const char *state;
+ /* Get the chip configuration */
+ config_t *config = dev->chip_info;
+
+ int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+ int nmi_option;
+
+ /* Which state do we want to goto after g3 (power restored)?
+ * 0 == S0 Full On
+ * 1 == S5 Soft Off
+ *
+ * If the option is not existent (Laptops), use Kconfig setting.
+ */
+ get_option(&pwr_on, "power_on_after_fail");
+
+ reg16 = pci_read_config16(dev, GEN_PMCON_3);
+ reg16 &= 0xfffe;
+ switch (pwr_on) {
+ case MAINBOARD_POWER_OFF:
+ reg16 |= 1;
+ state = "off";
+ break;
+ case MAINBOARD_POWER_ON:
+ reg16 &= ~1;
+ state = "on";
+ break;
+ case MAINBOARD_POWER_KEEP:
+ reg16 &= ~1;
+ state = "state keep";
+ break;
+ default:
+ state = "undefined";
+ }
+
+ reg16 &= ~(3 << 4); /* SLP_S4# Assertion Stretch 4s */
+ reg16 |= (1 << 3); /* SLP_S4# Assertion Stretch Enable */
+
+ reg16 &= ~(1 << 10);
+ reg16 |= (1 << 11); /* SLP_S3# Min Assertion Width 50ms */
+
+ reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */
+
+ pci_write_config16(dev, GEN_PMCON_3, reg16);
+ printk(BIOS_INFO, "Set power %s after power failure.\n", state);
+
+ /* Set up NMI on errors. */
+ reg8 = inb(0x61);
+ reg8 &= 0x0f; /* Higher Nibble must be 0 */
+ reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */
+ // reg8 &= ~(1 << 2); /* PCI SERR# Enable */
+ reg8 |= (1 << 2); /* PCI SERR# Disable for now */
+ outb(reg8, 0x61);
+
+ reg8 = inb(0x70);
+ nmi_option = NMI_OFF;
+ get_option(&nmi_option, "nmi");
+ if (nmi_option) {
+ printk(BIOS_INFO, "NMI sources enabled.\n");
+ reg8 &= ~(1 << 7); /* Set NMI. */
+ } else {
+ printk(BIOS_INFO, "NMI sources disabled.\n");
+ reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */
+ }
+ outb(reg8, 0x70);
+
+ /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
+ reg16 = pci_read_config16(dev, GEN_PMCON_1);
+ reg16 &= ~(3 << 0); // SMI# rate 1 minute
+ reg16 &= ~(1 << 10); // Disable BIOS_PCI_EXP_EN for native PME
+#if DEBUG_PERIODIC_SMIS
+ /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using
+ * periodic SMIs.
+ */
+ reg16 |= (3 << 0); // Periodic SMI every 8s
+#endif
+ pci_write_config16(dev, GEN_PMCON_1, reg16);
+
+ // Set the board's GPI routing.
+ pch_gpi_routing(dev);
+
+ pmbase = pci_read_config16(dev, 0x40) & 0xfffe;
+
+ outl(config->gpe0_en, pmbase + GPE0_EN);
+ outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN);
+
+ /* Set up power management block and determine sleep mode */
+ reg32 = inl(pmbase + 0x04); // PM1_CNT
+ reg32 &= ~(7 << 10); // SLP_TYP
+ reg32 |= (1 << 0); // SCI_EN
+ outl(reg32, pmbase + 0x04);
+
+ /* Clear magic status bits to prevent unexpected wake */
+ reg32 = RCBA32(0x3310);
+ reg32 |= (1 << 4)|(1 << 5)|(1 << 0);
+ RCBA32(0x3310) = reg32;
+
+ reg32 = RCBA32(0x3f02);
+ reg32 &= ~0xf;
+ RCBA32(0x3f02) = reg32;
+}
+
+static void pch_rtc_init(struct device *dev)
+{
+ u8 reg8;
+ int rtc_failed;
+
+ reg8 = pci_read_config8(dev, GEN_PMCON_3);
+ rtc_failed = reg8 & RTC_BATTERY_DEAD;
+ if (rtc_failed) {
+ reg8 &= ~RTC_BATTERY_DEAD;
+ pci_write_config8(dev, GEN_PMCON_3, reg8);
+ }
+ printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed);
+
+ rtc_init(rtc_failed);
+}
+
+static void pch_pm_init(struct device *dev)
+{
+ pci_write_config8(dev, 0xa9, 0x47);
+ RCBA32_AND_OR(0x2238, ~0UL, (1 << 6)|(1 << 0));
+ RCBA32_AND_OR(0x228c, ~0UL, (1 << 0));
+ RCBA16_AND_OR(0x1100, ~0UL, (1 << 13)|(1 << 14));
+ RCBA16_AND_OR(0x0900, ~0UL, (1 << 14));
+ RCBA32(0x2304) = 0xc0388400;
+ RCBA32_AND_OR(0x2314, ~0UL, (1 << 5)|(1 << 18));
+ RCBA32_AND_OR(0x2320, ~0UL, (1 << 15)|(1 << 1));
+ RCBA32_AND_OR(0x3314, ~0x1f, 0xf);
+ RCBA32(0x3318) = 0x050f0000;
+ RCBA32(0x3324) = 0x04000000;
+ RCBA32_AND_OR(0x3340, ~0UL, 0xfffff);
+ RCBA32_AND_OR(0x3344, ~0UL, (1 << 1));
+ RCBA32(0x3360) = 0x0001c000;
+ RCBA32(0x3368) = 0x00061100;
+ RCBA32(0x3378) = 0x7f8fdfff;
+ RCBA32(0x337c) = 0x000003fc;
+ RCBA32(0x3388) = 0x00001000;
+ RCBA32(0x3390) = 0x0001c000;
+ RCBA32(0x33a0) = 0x00000800;
+ RCBA32(0x33b0) = 0x00001000;
+ RCBA32(0x33c0) = 0x00093900;
+ RCBA32(0x33cc) = 0x24653002;
+ RCBA32(0x33d0) = 0x062108fe;
+ RCBA32_AND_OR(0x33d4, 0xf000f000, 0x00670060);
+ RCBA32(0x3a28) = 0x01010000;
+ RCBA32(0x3a2c) = 0x01010404;
+ RCBA32(0x3a80) = 0x01041041;
+ RCBA32_AND_OR(0x3a84, ~0x0000ffff, 0x00001001);
+ RCBA32_AND_OR(0x3a84, ~0UL, (1 << 24)); /* SATA 2/3 disabled */
+ RCBA32_AND_OR(0x3a88, ~0UL, (1 << 0)); /* SATA 4/5 disabled */
+ RCBA32(0x3a6c) = 0x00000001;
+ RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c);
+ RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20);
+ RCBA32(0x33c8) = 0;
+ RCBA32_AND_OR(0x21b0, ~0UL, 0xf);
+}
+
+static void enable_hpet(void)
+{
+ u32 reg32;
+
+ /* Move HPET to default address 0xfed00000 and enable it */
+ reg32 = RCBA32(HPTC);
+ reg32 |= (1 << 7); // HPET Address Enable
+ reg32 &= ~(3 << 0);
+ RCBA32(HPTC) = reg32;
+}
+
+static void enable_clock_gating(device_t dev)
+{
+ u32 reg32;
+ u16 reg16;
+
+ RCBA32_AND_OR(0x2234, ~0UL, 0xf);
+
+ reg16 = pci_read_config16(dev, GEN_PMCON_1);
+ reg16 |= (1 << 2) | (1 << 11);
+ pci_write_config16(dev, GEN_PMCON_1, reg16);
+
+ pch_iobp_update(0xEB007F07, ~0UL, (1 << 31));
+ pch_iobp_update(0xEB004000, ~0UL, (1 << 7));
+ pch_iobp_update(0xEC007F07, ~0UL, (1 << 31));
+ pch_iobp_update(0xEC004000, ~0UL, (1 << 7));
+
+ reg32 = RCBA32(CG);
+ reg32 |= (1 << 31);
+ reg32 |= (1 << 29) | (1 << 28);
+ reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24);
+ reg32 |= (1 << 16);
+ reg32 |= (1 << 17);
+ reg32 |= (1 << 18);
+ reg32 |= (1 << 22);
+ reg32 |= (1 << 23);
+ reg32 &= ~(1 << 20);
+ reg32 |= (1 << 19);
+ reg32 |= (1 << 0);
+ reg32 |= (0xf << 1);
+ RCBA32(CG) = reg32;
+
+ RCBA32_OR(0x38c0, 0x7);
+ RCBA32_OR(0x36d4, 0x6680c004);
+ RCBA32_OR(0x3564, 0x3);
+}
+
+#if CONFIG_HAVE_SMI_HANDLER
+static void pch_lock_smm(struct device *dev)
+{
+#if TEST_SMM_FLASH_LOCKDOWN
+ u8 reg8;
+#endif
+
+#if ENABLE_ACPI_MODE_IN_COREBOOT
+ printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n");
+ outb(0xe1, 0xb2); // Enable ACPI mode
+ printk(BIOS_DEBUG, "done.\n");
+#else
+ printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n");
+ outb(0x1e, 0xb2); // Disable ACPI mode
+ printk(BIOS_DEBUG, "done.\n");
+#endif
+ /* Don't allow evil boot loaders, kernels, or
+ * userspace applications to deceive us:
+ */
+ smm_lock();
+
+#if TEST_SMM_FLASH_LOCKDOWN
+ /* Now try this: */
+ printk(BIOS_DEBUG, "Locking BIOS to RO... ");
+ reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
+ (reg8&1)?"rw":"ro");
+ reg8 &= ~(1 << 0); /* clear BIOSWE */
+ pci_write_config8(dev, 0xdc, reg8);
+ reg8 |= (1 << 1); /* set BLE */
+ pci_write_config8(dev, 0xdc, reg8);
+ printk(BIOS_DEBUG, "ok.\n");
+ reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
+ (reg8&1)?"rw":"ro");
+
+ printk(BIOS_DEBUG, "Writing:\n");
+ *(volatile u8 *)0xfff00000 = 0x00;
+ printk(BIOS_DEBUG, "Testing:\n");
+ reg8 |= (1 << 0); /* set BIOSWE */
+ pci_write_config8(dev, 0xdc, reg8);
+
+ reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
+ (reg8&1)?"rw":"ro");
+ printk(BIOS_DEBUG, "Done.\n");
+#endif
+}
+#endif
+
+static void pch_disable_smm_only_flashing(struct device *dev)
+{
+ u8 reg8;
+
+ printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... ");
+ reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ reg8 &= ~(1 << 5);
+ pci_write_config8(dev, 0xdc, reg8);
+}
+
+static void pch_fixups(struct device *dev)
+{
+ u8 gen_pmcon_2;
+
+ /* Indicate DRAM init done for MRC S3 to know it can resume */
+ gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2);
+ gen_pmcon_2 |= (1 << 7);
+ pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2);
+
+ /*
+ * Enable DMI ASPM in the PCH
+ */
+ RCBA32_AND_OR(0x2304, ~(1 << 10), 0);
+ RCBA32_OR(0x21a4, (1 << 11)|(1 << 10));
+ RCBA32_OR(0x21a8, 0x3);
+}
+
+static void pch_decode_init(struct device *dev)
+{
+ config_t *config = dev->chip_info;
+
+ printk(BIOS_DEBUG, "pch_decode_init\n");
+
+ pci_write_config32(dev, LPC_GEN1_DEC, config->gen1_dec);
+ pci_write_config32(dev, LPC_GEN2_DEC, config->gen2_dec);
+ pci_write_config32(dev, LPC_GEN3_DEC, config->gen3_dec);
+ pci_write_config32(dev, LPC_GEN4_DEC, config->gen4_dec);
+}
+
+static void lpc_init(struct device *dev)
+{
+ printk(BIOS_DEBUG, "pch: lpc_init\n");
+
+ /* Set the value for PCI command register. */
+ pci_write_config16(dev, PCI_COMMAND, 0x000f);
+
+ /* IO APIC initialization. */
+ pch_enable_apic(dev);
+
+ pch_enable_serial_irqs(dev);
+
+ /* Setup the PIRQ. */
+ pch_pirq_init(dev);
+
+ /* Setup power options. */
+ pch_power_options(dev);
+
+ /* Initialize power management */
+ pch_pm_init(dev);
+
+ /* Set the state of the GPIO lines. */
+ //gpio_init(dev);
+
+ /* Initialize the real time clock. */
+ pch_rtc_init(dev);
+
+ /* Initialize ISA DMA. */
+ isa_dma_init();
+
+ /* Initialize the High Precision Event Timers, if present. */
+ enable_hpet();
+
+ /* Initialize Clock Gating */
+ enable_clock_gating(dev);
+
+ setup_i8259();
+
+ /* The OS should do this? */
+ /* Interrupt 9 should be level triggered (SCI) */
+ i8259_configure_irq_trigger(9, 1);
+
+ pch_disable_smm_only_flashing(dev);
+
+#if CONFIG_HAVE_SMI_HANDLER
+ pch_lock_smm(dev);
+#endif
+
+ pch_fixups(dev);
+}
+
+static void pch_lpc_read_resources(device_t dev)
+{
+ struct resource *res;
+
+ /* Get the normal PCI resources of this device. */
+ pci_dev_read_resources(dev);
+
+ /* Add an extra subtractive resource for both memory and I/O. */
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
+ res->base = 0;
+ res->size = 0x1000;
+ res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
+ res->base = 0xff800000;
+ res->size = 0x00800000; /* 8 MB for flash */
+ res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ res = new_resource(dev, 3); /* IOAPIC */
+ res->base = IO_APIC_ADDR;
+ res->size = 0x00001000;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+}
+
+static void pch_lpc_enable_resources(device_t dev)
+{
+ pch_decode_init(dev);
+ return pci_dev_enable_resources(dev);
+}
+
+static void pch_lpc_enable(device_t dev)
+{
+ /* Enable PCH Display Port */
+ RCBA16(DISPBDF) = 0x0010;
+ RCBA32_OR(FD2, PCH_ENABLE_DBDF);
+
+ pch_enable(dev);
+}
+
+static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations pci_ops = {
+ .set_subsystem = set_subsystem,
+};
+
+static struct device_operations device_ops = {
+ .read_resources = pch_lpc_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pch_lpc_enable_resources,
+ .init = lpc_init,
+ .enable = pch_lpc_enable,
+ .scan_bus = scan_static_bus,
+ .ops_pci = &pci_ops,
+};
+
+
+/* IDs for LPC device of Intel 6 series Chipset and
+ * Intel C200 Series Chipset according to specification
+ * update from August 2011
+ */
+
+static const struct pci_driver q67_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c4e,
+};
+static const struct pci_driver q65_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c4c,
+};
+static const struct pci_driver b65_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c50,
+};
+static const struct pci_driver h67_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c4a,
+};
+static const struct pci_driver z68_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c46,
+};
+static const struct pci_driver h61_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c5c,
+};
+static const struct pci_driver c202_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c52,
+};
+static const struct pci_driver c204_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c54,
+};
+static const struct pci_driver c206_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c56,
+};
+static const struct pci_driver qm67_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c4f,
+};
+static const struct pci_driver um67_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c47,
+};
+static const struct pci_driver hm67_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c4b,
+};
+static const struct pci_driver hm65_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c49,
+};
+static const struct pci_driver qs67_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c4d,
+};
+static const struct pci_driver c216_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1e55,
+};
diff --git a/src/southbridge/intel/bd82x6x/me.c b/src/southbridge/intel/bd82x6x/me.c
new file mode 100644
index 0000000000..a1ae06dfd5
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/me.c
@@ -0,0 +1,750 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/*
+ * This is a ramstage driver for the Intel Management Engine found in the
+ * 6-series chipset. It handles the required boot-time messages over the
+ * MMIO-based Management Engine Interface to tell the ME that the BIOS is
+ * finished with POST. Additional messages are defined for debug but are
+ * not used unless the console loglevel is high enough.
+ */
+
+#include <arch/acpi.h>
+#include <arch/hlt.h>
+#include <arch/io.h>
+#include <console/console.h>
+#include <device/pci_ids.h>
+#include <device/pci_def.h>
+#include <string.h>
+#include <delay.h>
+
+#ifdef __SMM__
+# include <arch/romcc_io.h>
+# include <northbridge/intel/sandybridge/pcie_config.c>
+#else
+# include <device/device.h>
+# include <device/pci.h>
+#endif
+
+#include "me.h"
+#include "pch.h"
+
+#if CONFIG_CHROMEOS
+#include <vendorcode/google/chromeos/gnvs.h>
+#endif
+
+#ifndef __SMM__
+/* Path that the BIOS should take based on ME state */
+static const char *me_bios_path_values[] = {
+ [ME_NORMAL_BIOS_PATH] = "Normal",
+ [ME_S3WAKE_BIOS_PATH] = "S3 Wake",
+ [ME_ERROR_BIOS_PATH] = "Error",
+ [ME_RECOVERY_BIOS_PATH] = "Recovery",
+ [ME_DISABLE_BIOS_PATH] = "Disable",
+ [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update",
+};
+#endif
+
+/* MMIO base address for MEI interface */
+static u32 mei_base_address;
+
+#if CONFIG_DEBUG_INTEL_ME
+static void mei_dump(void *ptr, int dword, int offset, const char *type)
+{
+ struct mei_csr *csr;
+
+ printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset);
+
+ switch (offset) {
+ case MEI_H_CSR:
+ case MEI_ME_CSR_HA:
+ csr = ptr;
+ if (!csr) {
+ printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword);
+ break;
+ }
+ printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u "
+ "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth,
+ csr->buffer_read_ptr, csr->buffer_write_ptr,
+ csr->ready, csr->reset, csr->interrupt_generate,
+ csr->interrupt_status, csr->interrupt_enable);
+ break;
+ case MEI_ME_CB_RW:
+ case MEI_H_CB_WW:
+ printk(BIOS_SPEW, "CB: 0x%08x\n", dword);
+ break;
+ default:
+ printk(BIOS_SPEW, "0x%08x\n", offset);
+ break;
+ }
+}
+#else
+# define mei_dump(ptr,dword,offset,type) do {} while (0)
+#endif
+
+/*
+ * ME/MEI access helpers using memcpy to avoid aliasing.
+ */
+
+static inline void mei_read_dword_ptr(void *ptr, int offset)
+{
+ u32 dword = read32(mei_base_address + offset);
+ memcpy(ptr, &dword, sizeof(dword));
+ mei_dump(ptr, dword, offset, "READ");
+}
+
+static inline void mei_write_dword_ptr(void *ptr, int offset)
+{
+ u32 dword = 0;
+ memcpy(&dword, ptr, sizeof(dword));
+ write32(mei_base_address + offset, dword);
+ mei_dump(ptr, dword, offset, "WRITE");
+}
+
+#ifndef __SMM__
+static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset)
+{
+ u32 dword = pci_read_config32(dev, offset);
+ memcpy(ptr, &dword, sizeof(dword));
+ mei_dump(ptr, dword, offset, "PCI READ");
+}
+#endif
+
+static inline void read_host_csr(struct mei_csr *csr)
+{
+ mei_read_dword_ptr(csr, MEI_H_CSR);
+}
+
+static inline void write_host_csr(struct mei_csr *csr)
+{
+ mei_write_dword_ptr(csr, MEI_H_CSR);
+}
+
+static inline void read_me_csr(struct mei_csr *csr)
+{
+ mei_read_dword_ptr(csr, MEI_ME_CSR_HA);
+}
+
+static inline void write_cb(u32 dword)
+{
+ write32(mei_base_address + MEI_H_CB_WW, dword);
+ mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE");
+}
+
+static inline u32 read_cb(void)
+{
+ u32 dword = read32(mei_base_address + MEI_ME_CB_RW);
+ mei_dump(NULL, dword, MEI_ME_CB_RW, "READ");
+ return dword;
+}
+
+/* Wait for ME ready bit to be asserted */
+static int mei_wait_for_me_ready(void)
+{
+ struct mei_csr me;
+ unsigned try = ME_RETRY;
+
+ while (try--) {
+ read_me_csr(&me);
+ if (me.ready)
+ return 0;
+ udelay(ME_DELAY);
+ }
+
+ printk(BIOS_ERR, "ME: failed to become ready\n");
+ return -1;
+}
+
+static void mei_reset(void)
+{
+ struct mei_csr host;
+
+ if (mei_wait_for_me_ready() < 0)
+ return;
+
+ /* Reset host and ME circular buffers for next message */
+ read_host_csr(&host);
+ host.reset = 1;
+ host.interrupt_generate = 1;
+ write_host_csr(&host);
+
+ if (mei_wait_for_me_ready() < 0)
+ return;
+
+ /* Re-init and indicate host is ready */
+ read_host_csr(&host);
+ host.interrupt_generate = 1;
+ host.ready = 1;
+ host.reset = 0;
+ write_host_csr(&host);
+}
+
+static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi,
+ void *req_data)
+{
+ struct mei_csr host;
+ unsigned ndata, n;
+ u32 *data;
+
+ /* Number of dwords to write, ignoring MKHI */
+ ndata = mei->length >> 2;
+
+ /* Pad non-dword aligned request message length */
+ if (mei->length & 3)
+ ndata++;
+ if (!ndata) {
+ printk(BIOS_DEBUG, "ME: request does not include MKHI\n");
+ return -1;
+ }
+ ndata++; /* Add MEI header */
+
+ /*
+ * Make sure there is still room left in the circular buffer.
+ * Reset the buffer pointers if the requested message will not fit.
+ */
+ read_host_csr(&host);
+ if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
+ printk(BIOS_ERR, "ME: circular buffer full, resetting...\n");
+ mei_reset();
+ read_host_csr(&host);
+ }
+
+ /*
+ * This implementation does not handle splitting large messages
+ * across multiple transactions. Ensure the requested length
+ * will fit in the available circular buffer depth.
+ */
+ if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
+ printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n",
+ ndata + 2, host.buffer_depth);
+ return -1;
+ }
+
+ /* Write MEI header */
+ mei_write_dword_ptr(mei, MEI_H_CB_WW);
+ ndata--;
+
+ /* Write MKHI header */
+ mei_write_dword_ptr(mkhi, MEI_H_CB_WW);
+ ndata--;
+
+ /* Write message data */
+ data = req_data;
+ for (n = 0; n < ndata; ++n)
+ write_cb(*data++);
+
+ /* Generate interrupt to the ME */
+ read_host_csr(&host);
+ host.interrupt_generate = 1;
+ write_host_csr(&host);
+
+ /* Make sure ME is ready after sending request data */
+ return mei_wait_for_me_ready();
+}
+
+static int mei_recv_msg(struct mei_header *mei, struct mkhi_header *mkhi,
+ void *rsp_data, int rsp_bytes)
+{
+ struct mei_header mei_rsp;
+ struct mkhi_header mkhi_rsp;
+ struct mei_csr me, host;
+ unsigned ndata, n;
+ unsigned expected;
+ u32 *data;
+
+ /* Total number of dwords to read from circular buffer */
+ expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2;
+ if (rsp_bytes & 3)
+ expected++;
+
+ /*
+ * The interrupt status bit does not appear to indicate that the
+ * message has actually been received. Instead we wait until the
+ * expected number of dwords are present in the circular buffer.
+ */
+ for (n = ME_RETRY; n; --n) {
+ read_me_csr(&me);
+ if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected)
+ break;
+ udelay(ME_DELAY);
+ }
+ if (!n) {
+ printk(BIOS_ERR, "ME: timeout waiting for data: expected "
+ "%u, available %u\n", expected,
+ me.buffer_write_ptr - me.buffer_read_ptr);
+ return -1;
+ }
+
+ /* Read and verify MEI response header from the ME */
+ mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW);
+ if (!mei_rsp.is_complete) {
+ printk(BIOS_ERR, "ME: response is not complete\n");
+ return -1;
+ }
+
+ /* Handle non-dword responses and expect at least MKHI header */
+ ndata = mei_rsp.length >> 2;
+ if (mei_rsp.length & 3)
+ ndata++;
+ if (ndata != (expected - 1)) {
+ printk(BIOS_ERR, "ME: response is missing data\n");
+ return -1;
+ }
+
+ /* Read and verify MKHI response header from the ME */
+ mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW);
+ if (!mkhi_rsp.is_response ||
+ mkhi->group_id != mkhi_rsp.group_id ||
+ mkhi->command != mkhi_rsp.command) {
+ printk(BIOS_ERR, "ME: invalid response, group %u ?= %u, "
+ "command %u ?= %u, is_response %u\n", mkhi->group_id,
+ mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command,
+ mkhi_rsp.is_response);
+ return -1;
+ }
+ ndata--; /* MKHI header has been read */
+
+ /* Make sure caller passed a buffer with enough space */
+ if (ndata != (rsp_bytes >> 2)) {
+ printk(BIOS_ERR, "ME: not enough room in response buffer: "
+ "%u != %u\n", ndata, rsp_bytes >> 2);
+ return -1;
+ }
+
+ /* Read response data from the circular buffer */
+ data = rsp_data;
+ for (n = 0; n < ndata; ++n)
+ *data++ = read_cb();
+
+ /* Tell the ME that we have consumed the response */
+ read_host_csr(&host);
+ host.interrupt_status = 1;
+ host.interrupt_generate = 1;
+ write_host_csr(&host);
+
+ return mei_wait_for_me_ready();
+}
+
+static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi,
+ void *req_data, void *rsp_data, int rsp_bytes)
+{
+ if (mei_send_msg(mei, mkhi, req_data) < 0)
+ return -1;
+ if (mei_recv_msg(mei, mkhi, rsp_data, rsp_bytes) < 0)
+ return -1;
+ return 0;
+}
+
+/* Send END OF POST message to the ME */
+int mkhi_end_of_post(void)
+{
+ struct mkhi_header mkhi = {
+ .group_id = MKHI_GROUP_ID_GEN,
+ .command = MKHI_END_OF_POST,
+ };
+ struct mei_header mei = {
+ .is_complete = 1,
+ .host_address = MEI_HOST_ADDRESS,
+ .client_address = MEI_ADDRESS_MKHI,
+ .length = sizeof(mkhi),
+ };
+
+ /* Send request and wait for response */
+ if (mei_sendrecv(&mei, &mkhi, NULL, NULL, 0) < 0) {
+ printk(BIOS_ERR, "ME: END OF POST message failed\n");
+ return -1;
+ }
+
+ printk(BIOS_INFO, "ME: END OF POST message successful\n");
+ return 0;
+}
+
+#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) && !defined(__SMM__)
+/* Get ME firmware version */
+static int mkhi_get_fw_version(void)
+{
+ struct me_fw_version version;
+ struct mkhi_header mkhi = {
+ .group_id = MKHI_GROUP_ID_GEN,
+ .command = MKHI_GET_FW_VERSION,
+ };
+ struct mei_header mei = {
+ .is_complete = 1,
+ .host_address = MEI_HOST_ADDRESS,
+ .client_address = MEI_ADDRESS_MKHI,
+ .length = sizeof(mkhi),
+ };
+
+ /* Send request and wait for response */
+ if (mei_sendrecv(&mei, &mkhi, NULL, &version, sizeof(version)) < 0) {
+ printk(BIOS_ERR, "ME: GET FW VERSION message failed\n");
+ return -1;
+ }
+
+ printk(BIOS_INFO, "ME: Firmware Version %u.%u.%u.%u (code) "
+ "%u.%u.%u.%u (recovery)\n",
+ version.code_major, version.code_minor,
+ version.code_build_number, version.code_hot_fix,
+ version.recovery_major, version.recovery_minor,
+ version.recovery_build_number, version.recovery_hot_fix);
+
+ return 0;
+}
+
+static inline void print_cap(const char *name, int state)
+{
+ printk(BIOS_DEBUG, "ME Capability: %-30s : %sabled\n",
+ name, state ? "en" : "dis");
+}
+
+/* Get ME Firmware Capabilities */
+static int mkhi_get_fwcaps(void)
+{
+ u32 rule_id = 0;
+ struct me_fwcaps cap;
+ struct mkhi_header mkhi = {
+ .group_id = MKHI_GROUP_ID_FWCAPS,
+ .command = MKHI_FWCAPS_GET_RULE,
+ };
+ struct mei_header mei = {
+ .is_complete = 1,
+ .host_address = MEI_HOST_ADDRESS,
+ .client_address = MEI_ADDRESS_MKHI,
+ .length = sizeof(mkhi) + sizeof(rule_id),
+ };
+
+ /* Send request and wait for response */
+ if (mei_sendrecv(&mei, &mkhi, &rule_id, &cap, sizeof(cap)) < 0) {
+ printk(BIOS_ERR, "ME: GET FWCAPS message failed\n");
+ return -1;
+ }
+
+ print_cap("Full Network manageability", cap.caps_sku.full_net);
+ print_cap("Regular Network manageability", cap.caps_sku.std_net);
+ print_cap("Manageability", cap.caps_sku.manageability);
+ print_cap("Small business technology", cap.caps_sku.small_business);
+ print_cap("Level III manageability", cap.caps_sku.l3manageability);
+ print_cap("IntelR Anti-Theft (AT)", cap.caps_sku.intel_at);
+ print_cap("IntelR Capability Licensing Service (CLS)",
+ cap.caps_sku.intel_cls);
+ print_cap("IntelR Power Sharing Technology (MPC)",
+ cap.caps_sku.intel_mpc);
+ print_cap("ICC Over Clocking", cap.caps_sku.icc_over_clocking);
+ print_cap("Protected Audio Video Path (PAVP)", cap.caps_sku.pavp);
+ print_cap("IPV6", cap.caps_sku.ipv6);
+ print_cap("KVM Remote Control (KVM)", cap.caps_sku.kvm);
+ print_cap("Outbreak Containment Heuristic (OCH)", cap.caps_sku.och);
+ print_cap("Virtual LAN (VLAN)", cap.caps_sku.vlan);
+ print_cap("TLS", cap.caps_sku.tls);
+ print_cap("Wireless LAN (WLAN)", cap.caps_sku.wlan);
+
+ return 0;
+}
+#endif
+
+/* Tell ME to issue a global reset */
+int mkhi_global_reset(void)
+{
+ struct me_global_reset reset = {
+ .request_origin = GLOBAL_RESET_BIOS_POST,
+ .reset_type = CBM_RR_GLOBAL_RESET,
+ };
+ struct mkhi_header mkhi = {
+ .group_id = MKHI_GROUP_ID_CBM,
+ .command = MKHI_GLOBAL_RESET,
+ };
+ struct mei_header mei = {
+ .is_complete = 1,
+ .length = sizeof(mkhi) + sizeof(reset),
+ .host_address = MEI_HOST_ADDRESS,
+ .client_address = MEI_ADDRESS_MKHI,
+ };
+
+ printk(BIOS_NOTICE, "ME: Requesting global reset\n");
+
+ /* Send request and wait for response */
+ if (mei_sendrecv(&mei, &mkhi, &reset, NULL, 0) < 0) {
+ /* No response means reset will happen shortly... */
+ hlt();
+ }
+
+ /* If the ME responded it rejected the reset request */
+ printk(BIOS_ERR, "ME: Global Reset failed\n");
+ return -1;
+}
+
+#ifdef __SMM__
+
+void intel_me_finalize_smm(void)
+{
+ struct me_hfs hfs;
+ u32 reg32;
+
+ mei_base_address =
+ pcie_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf;
+
+ /* S3 path will have hidden this device already */
+ if (!mei_base_address || mei_base_address == 0xfffffff0)
+ return;
+
+ /* Make sure ME is in a mode that expects EOP */
+ reg32 = pcie_read_config32(PCH_ME_DEV, PCI_ME_HFS);
+ memcpy(&hfs, &reg32, sizeof(u32));
+
+ /* Abort and leave device alone if not normal mode */
+ if (hfs.fpt_bad ||
+ hfs.working_state != ME_HFS_CWS_NORMAL ||
+ hfs.operation_mode != ME_HFS_MODE_NORMAL)
+ return;
+
+ /* Try to send EOP command so ME stops accepting other commands */
+ mkhi_end_of_post();
+
+ /* Make sure IO is disabled */
+ reg32 = pcie_read_config32(PCH_ME_DEV, PCI_COMMAND);
+ reg32 &= ~(PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
+ pcie_write_config32(PCH_ME_DEV, PCI_COMMAND, reg32);
+
+ /* Hide the PCI device */
+ RCBA32_OR(FD2, PCH_DISABLE_MEI1);
+}
+
+#else /* !__SMM__ */
+
+/* Determine the path that we should take based on ME status */
+static me_bios_path intel_me_path(device_t dev)
+{
+ me_bios_path path = ME_DISABLE_BIOS_PATH;
+ struct me_hfs hfs;
+ struct me_gmes gmes;
+
+#if CONFIG_HAVE_ACPI_RESUME
+ /* S3 wake skips all MKHI messages */
+ if (acpi_slp_type == 3) {
+ return ME_S3WAKE_BIOS_PATH;
+ }
+#endif
+
+ pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS);
+ pci_read_dword_ptr(dev, &gmes, PCI_ME_GMES);
+
+ /* Check and dump status */
+ intel_me_status(&hfs, &gmes);
+
+ /* Check for valid firmware */
+ if (hfs.fpt_bad)
+ return ME_ERROR_BIOS_PATH;
+
+ /* Check Current Working State */
+ switch (hfs.working_state) {
+ case ME_HFS_CWS_NORMAL:
+ path = ME_NORMAL_BIOS_PATH;
+ break;
+ case ME_HFS_CWS_REC:
+ path = ME_RECOVERY_BIOS_PATH;
+ break;
+ default:
+ path = ME_DISABLE_BIOS_PATH;
+ break;
+ }
+
+ /* Check Current Operation Mode */
+ switch (hfs.operation_mode) {
+ case ME_HFS_MODE_NORMAL:
+ break;
+ case ME_HFS_MODE_DEBUG:
+ case ME_HFS_MODE_DIS:
+ case ME_HFS_MODE_OVER_JMPR:
+ case ME_HFS_MODE_OVER_MEI:
+ default:
+ path = ME_DISABLE_BIOS_PATH;
+ break;
+ }
+
+ /* Check for any error code */
+ if (hfs.error_code)
+ path = ME_ERROR_BIOS_PATH;
+
+ return path;
+}
+
+/* Prepare ME for MEI messages */
+static int intel_mei_setup(device_t dev)
+{
+ struct resource *res;
+ struct mei_csr host;
+ u32 reg32;
+
+ /* Find the MMIO base for the ME interface */
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (!res || res->base == 0 || res->size == 0) {
+ printk(BIOS_DEBUG, "ME: MEI resource not present!\n");
+ return -1;
+ }
+ mei_base_address = res->base;
+
+ /* Ensure Memory and Bus Master bits are set */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ /* Clean up status for next message */
+ read_host_csr(&host);
+ host.interrupt_generate = 1;
+ host.ready = 1;
+ host.reset = 0;
+ write_host_csr(&host);
+
+ return 0;
+}
+
+/* Read the Extend register hash of ME firmware */
+static int intel_me_extend_valid(device_t dev)
+{
+ struct me_heres status;
+ u32 extend[] = {0};
+ int i, count = 0;
+
+ pci_read_dword_ptr(dev, &status, PCI_ME_HERES);
+ if (!status.extend_feature_present) {
+ printk(BIOS_ERR, "ME: Extend Feature not present\n");
+ return -1;
+ }
+
+ if (!status.extend_reg_valid) {
+ printk(BIOS_ERR, "ME: Extend Register not valid\n");
+ return -1;
+ }
+
+ switch (status.extend_reg_algorithm) {
+ case PCI_ME_EXT_SHA1:
+ count = 5;
+ printk(BIOS_DEBUG, "ME: Extend SHA-1: ");
+ break;
+ case PCI_ME_EXT_SHA256:
+ count = 8;
+ printk(BIOS_DEBUG, "ME: Extend SHA-256: ");
+ break;
+ default:
+ printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n",
+ status.extend_reg_algorithm);
+ return -1;
+ }
+
+ for (i = 0; i < count; ++i) {
+ extend[i] = pci_read_config32(dev, PCI_ME_HER(i));
+ printk(BIOS_DEBUG, "%08x", extend[i]);
+ }
+ printk(BIOS_DEBUG, "\n");
+
+#if CONFIG_CHROMEOS
+ /* Save hash in NVS for the OS to verify */
+ chromeos_set_me_hash(extend, count);
+#endif
+
+ return 0;
+}
+
+/* Hide the ME virtual PCI devices */
+static void intel_me_hide(device_t dev)
+{
+ dev->enabled = 0;
+ pch_enable(dev);
+}
+
+/* Check whether ME is present and do basic init */
+static void intel_me_init(device_t dev)
+{
+ me_bios_path path = intel_me_path(dev);
+
+ /* Do initial setup and determine the BIOS path */
+ printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]);
+
+ switch (path) {
+ case ME_S3WAKE_BIOS_PATH:
+ intel_me_hide(dev);
+ break;
+
+ case ME_NORMAL_BIOS_PATH:
+ /* Validate the extend register */
+ if (intel_me_extend_valid(dev) < 0)
+ break; /* TODO: force recovery mode */
+
+ /* Prepare MEI MMIO interface */
+ if (intel_mei_setup(dev) < 0)
+ break;
+
+#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG)
+ /* Print ME firmware version */
+ mkhi_get_fw_version();
+ /* Print ME firmware capabilities */
+ mkhi_get_fwcaps();
+#endif
+
+ /*
+ * Leave the ME unlocked in this path.
+ * It will be locked via SMI command later.
+ */
+ break;
+
+ case ME_ERROR_BIOS_PATH:
+ case ME_RECOVERY_BIOS_PATH:
+ case ME_DISABLE_BIOS_PATH:
+ case ME_FIRMWARE_UPDATE_BIOS_PATH:
+ /*
+ * TODO(dlaurie) Force recovery mode if ME is unhappy?
+ */
+ break;
+ }
+}
+
+static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations pci_ops = {
+ .set_subsystem = set_subsystem,
+};
+
+static struct device_operations device_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = intel_me_init,
+ .scan_bus = scan_static_bus,
+ .ops_pci = &pci_ops,
+};
+
+static const struct pci_driver intel_me __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c3a,
+};
+
+#endif /* !__SMM__ */
diff --git a/src/southbridge/intel/bd82x6x/me.h b/src/southbridge/intel/bd82x6x/me.h
new file mode 100644
index 0000000000..53964a2faa
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/me.h
@@ -0,0 +1,376 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _INTEL_ME_H
+#define _INTEL_ME_H
+
+#define ME_RETRY 100000 /* 1 second */
+#define ME_DELAY 10 /* 10 us */
+
+/*
+ * Management Engine PCI registers
+ */
+
+#define PCI_CPU_DEVICE PCI_DEV(0,0,0)
+#define PCI_CPU_MEBASE_L 0x70 /* Set by MRC */
+#define PCI_CPU_MEBASE_H 0x74 /* Set by MRC */
+
+#define PCI_ME_HFS 0x40
+#define ME_HFS_CWS_RESET 0
+#define ME_HFS_CWS_INIT 1
+#define ME_HFS_CWS_REC 2
+#define ME_HFS_CWS_NORMAL 5
+#define ME_HFS_CWS_WAIT 6
+#define ME_HFS_CWS_TRANS 7
+#define ME_HFS_CWS_INVALID 8
+#define ME_HFS_STATE_PREBOOT 0
+#define ME_HFS_STATE_M0_UMA 1
+#define ME_HFS_STATE_M3 4
+#define ME_HFS_STATE_M0 5
+#define ME_HFS_STATE_BRINGUP 6
+#define ME_HFS_STATE_ERROR 7
+#define ME_HFS_ERROR_NONE 0
+#define ME_HFS_ERROR_UNCAT 1
+#define ME_HFS_ERROR_IMAGE 3
+#define ME_HFS_ERROR_DEBUG 4
+#define ME_HFS_MODE_NORMAL 0
+#define ME_HFS_MODE_DEBUG 2
+#define ME_HFS_MODE_DIS 3
+#define ME_HFS_MODE_OVER_JMPR 4
+#define ME_HFS_MODE_OVER_MEI 5
+#define ME_HFS_BIOS_DRAM_ACK 1
+#define ME_HFS_ACK_NO_DID 0
+#define ME_HFS_ACK_RESET 1
+#define ME_HFS_ACK_PWR_CYCLE 2
+#define ME_HFS_ACK_S3 3
+#define ME_HFS_ACK_S4 4
+#define ME_HFS_ACK_S5 5
+#define ME_HFS_ACK_GBL_RESET 6
+#define ME_HFS_ACK_CONTINUE 7
+
+struct me_hfs {
+ u32 working_state: 4;
+ u32 mfg_mode: 1;
+ u32 fpt_bad: 1;
+ u32 operation_state: 3;
+ u32 fw_init_complete: 1;
+ u32 ft_bup_ld_flr: 1;
+ u32 update_in_progress: 1;
+ u32 error_code: 4;
+ u32 operation_mode: 4;
+ u32 reserved: 4;
+ u32 boot_options_present: 1;
+ u32 ack_data: 3;
+ u32 bios_msg_ack: 4;
+} __attribute__ ((packed));
+
+#define PCI_ME_UMA 0x44
+
+struct me_uma {
+ u32 size: 6;
+ u32 reserved_1: 10;
+ u32 valid: 1;
+ u32 reserved_0: 14;
+ u32 set_to_one: 1;
+} __attribute__ ((packed));
+
+#define PCI_ME_H_GS 0x4c
+#define ME_INIT_DONE 1
+#define ME_INIT_STATUS_SUCCESS 0
+#define ME_INIT_STATUS_NOMEM 1
+#define ME_INIT_STATUS_ERROR 2
+
+struct me_did {
+ u32 uma_base: 16;
+ u32 reserved: 8;
+ u32 status: 4;
+ u32 init_done: 4;
+} __attribute__ ((packed));
+
+#define PCI_ME_GMES 0x48
+#define ME_GMES_PHASE_ROM 0
+#define ME_GMES_PHASE_BUP 1
+#define ME_GMES_PHASE_UKERNEL 2
+#define ME_GMES_PHASE_POLICY 3
+#define ME_GMES_PHASE_MODULE 4
+#define ME_GMES_PHASE_UNKNOWN 5
+#define ME_GMES_PHASE_HOST 6
+
+struct me_gmes {
+ u32 bist_in_prog : 1;
+ u32 icc_prog_sts : 2;
+ u32 invoke_mebx : 1;
+ u32 cpu_replaced_sts : 1;
+ u32 mbp_rdy : 1;
+ u32 mfs_failure : 1;
+ u32 warm_rst_req_for_df : 1;
+ u32 cpu_replaced_valid : 1;
+ u32 reserved_1 : 2;
+ u32 fw_upd_ipu : 1;
+ u32 reserved_2 : 4;
+ u32 current_state: 8;
+ u32 current_pmevent: 4;
+ u32 progress_code: 4;
+} __attribute__ ((packed));
+
+#define PCI_ME_HERES 0xbc
+#define PCI_ME_EXT_SHA1 0x00
+#define PCI_ME_EXT_SHA256 0x02
+#define PCI_ME_HER(x) (0xc0+(4*(x)))
+
+struct me_heres {
+ u32 extend_reg_algorithm: 4;
+ u32 reserved: 26;
+ u32 extend_feature_present: 1;
+ u32 extend_reg_valid: 1;
+} __attribute__ ((packed));
+
+/*
+ * Management Engine MEI registers
+ */
+
+#define MEI_H_CB_WW 0x00
+#define MEI_H_CSR 0x04
+#define MEI_ME_CB_RW 0x08
+#define MEI_ME_CSR_HA 0x0c
+
+struct mei_csr {
+ u32 interrupt_enable: 1;
+ u32 interrupt_status: 1;
+ u32 interrupt_generate: 1;
+ u32 ready: 1;
+ u32 reset: 1;
+ u32 reserved: 3;
+ u32 buffer_read_ptr: 8;
+ u32 buffer_write_ptr: 8;
+ u32 buffer_depth: 8;
+} __attribute__ ((packed));
+
+#define MEI_ADDRESS_CORE 0x01
+#define MEI_ADDRESS_AMT 0x02
+#define MEI_ADDRESS_RESERVED 0x03
+#define MEI_ADDRESS_WDT 0x04
+#define MEI_ADDRESS_MKHI 0x07
+#define MEI_ADDRESS_ICC 0x08
+#define MEI_ADDRESS_THERMAL 0x09
+
+#define MEI_HOST_ADDRESS 0
+
+struct mei_header {
+ u32 client_address: 8;
+ u32 host_address: 8;
+ u32 length: 9;
+ u32 reserved: 6;
+ u32 is_complete: 1;
+} __attribute__ ((packed));
+
+#define MKHI_GROUP_ID_CBM 0x00
+#define MKHI_GROUP_ID_FWCAPS 0x03
+#define MKHI_GROUP_ID_MDES 0x08
+#define MKHI_GROUP_ID_GEN 0xff
+
+#define MKHI_GLOBAL_RESET 0x0b
+
+#define MKHI_FWCAPS_GET_RULE 0x02
+
+#define MKHI_MDES_ENABLE 0x09
+
+#define MKHI_GET_FW_VERSION 0x02
+#define MKHI_END_OF_POST 0x0c
+#define MKHI_FEATURE_OVERRIDE 0x14
+
+struct mkhi_header {
+ u32 group_id: 8;
+ u32 command: 7;
+ u32 is_response: 1;
+ u32 reserved: 8;
+ u32 result: 8;
+} __attribute__ ((packed));
+
+struct me_fw_version {
+ u16 code_minor;
+ u16 code_major;
+ u16 code_build_number;
+ u16 code_hot_fix;
+ u16 recovery_minor;
+ u16 recovery_major;
+ u16 recovery_build_number;
+ u16 recovery_hot_fix;
+} __attribute__ ((packed));
+
+
+#define HECI_EOP_STATUS_SUCCESS 0x0
+#define HECI_EOP_PERFORM_GLOBAL_RESET 0x1
+
+#define CBM_RR_GLOBAL_RESET 0x01
+
+#define GLOBAL_RESET_BIOS_MRC 0x01
+#define GLOBAL_RESET_BIOS_POST 0x02
+#define GLOBAL_RESET_MEBX 0x03
+
+struct me_global_reset {
+ u8 request_origin;
+ u8 reset_type;
+} __attribute__ ((packed));
+
+typedef enum {
+ ME_NORMAL_BIOS_PATH,
+ ME_S3WAKE_BIOS_PATH,
+ ME_ERROR_BIOS_PATH,
+ ME_RECOVERY_BIOS_PATH,
+ ME_DISABLE_BIOS_PATH,
+ ME_FIRMWARE_UPDATE_BIOS_PATH,
+} me_bios_path;
+
+/* Defined in me_status.c for both romstage and ramstage */
+void intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes);
+
+#ifdef __PRE_RAM__
+void intel_early_me_status(void);
+int intel_early_me_init(void);
+int intel_early_me_uma_size(void);
+int intel_early_me_init_done(u8 status);
+#else
+/* ME Kernel Host Interface Messages */
+int mkhi_end_of_post(void);
+int mkhi_global_reset(void);
+#endif
+
+#ifdef __SMM__
+void intel_me_finalize_smm(void);
+#endif
+typedef struct {
+ u32 major_version : 16;
+ u32 minor_version : 16;
+ u32 hotfix_version : 16;
+ u32 build_version : 16;
+} __attribute__ ((packed)) mbp_fw_version_name;
+
+typedef struct {
+ u8 num_icc_profiles;
+ u8 icc_profile_soft_strap;
+ u8 icc_profile_index;
+ u8 reserved;
+ u32 register_lock_mask[3];
+} __attribute__ ((packed)) mbp_icc_profile;
+
+typedef struct {
+ u32 full_net : 1;
+ u32 std_net : 1;
+ u32 manageability : 1;
+ u32 small_business : 1;
+ u32 l3manageability : 1;
+ u32 intel_at : 1;
+ u32 intel_cls : 1;
+ u32 reserved : 3;
+ u32 intel_mpc : 1;
+ u32 icc_over_clocking : 1;
+ u32 pavp : 1;
+ u32 reserved_1 : 4;
+ u32 ipv6 : 1;
+ u32 kvm : 1;
+ u32 och : 1;
+ u32 vlan : 1;
+ u32 tls : 1;
+ u32 reserved_4 : 1;
+ u32 wlan : 1;
+ u32 reserved_5 : 8;
+} __attribute__ ((packed)) mefwcaps_sku;
+
+typedef struct {
+ u16 lock_state : 1;
+ u16 authenticate_module : 1;
+ u16 s3authentication : 1;
+ u16 flash_wear_out : 1;
+ u16 flash_variable_security : 1;
+ u16 wwan3gpresent : 1;
+ u16 wwan3goob : 1;
+ u16 reserved : 9;
+} __attribute__ ((packed)) tdt_state_flag;
+
+typedef struct {
+ u8 state;
+ u8 last_theft_trigger;
+ tdt_state_flag flags;
+} __attribute__ ((packed)) tdt_state_info;
+
+typedef struct {
+ u32 platform_target_usage_type : 4;
+ u32 platform_target_market_type : 2;
+ u32 super_sku : 1;
+ u32 reserved : 1;
+ u32 intel_me_fw_image_type : 4;
+ u32 platform_brand : 4;
+ u32 reserved_1 : 16;
+} __attribute__ ((packed)) platform_type_rule_data;
+
+typedef struct {
+ mefwcaps_sku fw_capabilities;
+ u8 available;
+} mbp_fw_caps;
+
+typedef struct {
+ u16 device_id;
+ u16 fuse_test_flags;
+ u32 umchid[4];
+} __attribute__ ((packed)) mbp_rom_bist_data;
+
+typedef struct {
+ u32 key[8];
+} mbp_platform_key;
+
+typedef struct {
+ platform_type_rule_data rule_data;
+ u8 available;
+} mbp_plat_type;
+
+typedef struct {
+ mbp_fw_version_name fw_version_name;
+ mbp_fw_caps fw_caps_sku;
+ mbp_rom_bist_data rom_bist_data;
+ mbp_platform_key platform_key;
+ mbp_plat_type fw_plat_type;
+ mbp_icc_profile icc_profile;
+ tdt_state_info at_state;
+ u32 mfsintegrity;
+} me_bios_payload;
+
+typedef struct {
+ u32 mbp_size : 8;
+ u32 num_entries : 8;
+ u32 rsvd : 16;
+} __attribute__ ((packed)) mbp_header;
+
+typedef struct {
+ u32 app_id : 8;
+ u32 item_id : 8;
+ u32 length : 8;
+ u32 rsvd : 8;
+} __attribute__ ((packed)) mbp_item_header;
+
+struct me_fwcaps {
+ u32 id;
+ u8 length;
+ mefwcaps_sku caps_sku;
+ u8 reserved[3];
+} __attribute__ ((packed));
+
+#endif /* _INTEL_ME_H */
diff --git a/src/southbridge/intel/bd82x6x/me_8.x.c b/src/southbridge/intel/bd82x6x/me_8.x.c
new file mode 100644
index 0000000000..1bb2ce38dc
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/me_8.x.c
@@ -0,0 +1,919 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/*
+ * This is a ramstage driver for the Intel Management Engine found in the
+ * 6-series chipset. It handles the required boot-time messages over the
+ * MMIO-based Management Engine Interface to tell the ME that the BIOS is
+ * finished with POST. Additional messages are defined for debug but are
+ * not used unless the console loglevel is high enough.
+ */
+
+#include <arch/acpi.h>
+#include <arch/hlt.h>
+#include <arch/io.h>
+#include <console/console.h>
+#include <device/pci_ids.h>
+#include <device/pci_def.h>
+#include <string.h>
+#include <delay.h>
+
+#ifdef __SMM__
+# include <arch/romcc_io.h>
+# include <northbridge/intel/sandybridge/pcie_config.c>
+#else
+# include <device/device.h>
+# include <device/pci.h>
+#endif
+
+#include "me.h"
+#include "pch.h"
+
+#if CONFIG_CHROMEOS
+#include <vendorcode/google/chromeos/chromeos.h>
+#endif
+
+#ifndef __SMM__
+/* Path that the BIOS should take based on ME state */
+static const char *me_bios_path_values[] = {
+ [ME_NORMAL_BIOS_PATH] = "Normal",
+ [ME_S3WAKE_BIOS_PATH] = "S3 Wake",
+ [ME_ERROR_BIOS_PATH] = "Error",
+ [ME_RECOVERY_BIOS_PATH] = "Recovery",
+ [ME_DISABLE_BIOS_PATH] = "Disable",
+ [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update",
+};
+static int intel_me_read_mbp(me_bios_payload *mbp_data);
+#endif
+
+/* MMIO base address for MEI interface */
+static u32 mei_base_address;
+
+#if CONFIG_DEBUG_INTEL_ME
+static void mei_dump(void *ptr, int dword, int offset, const char *type)
+{
+ struct mei_csr *csr;
+
+ printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset);
+
+ switch (offset) {
+ case MEI_H_CSR:
+ case MEI_ME_CSR_HA:
+ csr = ptr;
+ if (!csr) {
+ printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword);
+ break;
+ }
+ printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u "
+ "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth,
+ csr->buffer_read_ptr, csr->buffer_write_ptr,
+ csr->ready, csr->reset, csr->interrupt_generate,
+ csr->interrupt_status, csr->interrupt_enable);
+ break;
+ case MEI_ME_CB_RW:
+ case MEI_H_CB_WW:
+ printk(BIOS_SPEW, "CB: 0x%08x\n", dword);
+ break;
+ default:
+ printk(BIOS_SPEW, "0x%08x\n", offset);
+ break;
+ }
+}
+#else
+# define mei_dump(ptr,dword,offset,type) do {} while (0)
+#endif
+
+/*
+ * ME/MEI access helpers using memcpy to avoid aliasing.
+ */
+
+static inline void mei_read_dword_ptr(void *ptr, int offset)
+{
+ u32 dword = read32(mei_base_address + offset);
+ memcpy(ptr, &dword, sizeof(dword));
+ mei_dump(ptr, dword, offset, "READ");
+}
+
+static inline void mei_write_dword_ptr(void *ptr, int offset)
+{
+ u32 dword = 0;
+ memcpy(&dword, ptr, sizeof(dword));
+ write32(mei_base_address + offset, dword);
+ mei_dump(ptr, dword, offset, "WRITE");
+}
+
+#ifndef __SMM__
+static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset)
+{
+ u32 dword = pci_read_config32(dev, offset);
+ memcpy(ptr, &dword, sizeof(dword));
+ mei_dump(ptr, dword, offset, "PCI READ");
+}
+#endif
+
+static inline void read_host_csr(struct mei_csr *csr)
+{
+ mei_read_dword_ptr(csr, MEI_H_CSR);
+}
+
+static inline void write_host_csr(struct mei_csr *csr)
+{
+ mei_write_dword_ptr(csr, MEI_H_CSR);
+}
+
+static inline void read_me_csr(struct mei_csr *csr)
+{
+ mei_read_dword_ptr(csr, MEI_ME_CSR_HA);
+}
+
+static inline void write_cb(u32 dword)
+{
+ write32(mei_base_address + MEI_H_CB_WW, dword);
+ mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE");
+}
+
+static inline u32 read_cb(void)
+{
+ u32 dword = read32(mei_base_address + MEI_ME_CB_RW);
+ mei_dump(NULL, dword, MEI_ME_CB_RW, "READ");
+ return dword;
+}
+
+/* Wait for ME ready bit to be asserted */
+static int mei_wait_for_me_ready(void)
+{
+ struct mei_csr me;
+ unsigned try = ME_RETRY;
+
+ while (try--) {
+ read_me_csr(&me);
+ if (me.ready)
+ return 0;
+ udelay(ME_DELAY);
+ }
+
+ printk(BIOS_ERR, "ME: failed to become ready\n");
+ return -1;
+}
+
+static void mei_reset(void)
+{
+ struct mei_csr host;
+
+ if (mei_wait_for_me_ready() < 0)
+ return;
+
+ /* Reset host and ME circular buffers for next message */
+ read_host_csr(&host);
+ host.reset = 1;
+ host.interrupt_generate = 1;
+ write_host_csr(&host);
+
+ if (mei_wait_for_me_ready() < 0)
+ return;
+
+ /* Re-init and indicate host is ready */
+ read_host_csr(&host);
+ host.interrupt_generate = 1;
+ host.ready = 1;
+ host.reset = 0;
+ write_host_csr(&host);
+}
+
+static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi,
+ void *req_data)
+{
+ struct mei_csr host;
+ unsigned ndata, n;
+ u32 *data;
+
+ /* Number of dwords to write, ignoring MKHI */
+ ndata = mei->length >> 2;
+
+ /* Pad non-dword aligned request message length */
+ if (mei->length & 3)
+ ndata++;
+ if (!ndata) {
+ printk(BIOS_DEBUG, "ME: request does not include MKHI\n");
+ return -1;
+ }
+ ndata++; /* Add MEI header */
+
+ /*
+ * Make sure there is still room left in the circular buffer.
+ * Reset the buffer pointers if the requested message will not fit.
+ */
+ read_host_csr(&host);
+ if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
+ printk(BIOS_ERR, "ME: circular buffer full, resetting...\n");
+ mei_reset();
+ read_host_csr(&host);
+ }
+
+ /*
+ * This implementation does not handle splitting large messages
+ * across multiple transactions. Ensure the requested length
+ * will fit in the available circular buffer depth.
+ */
+ if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
+ printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n",
+ ndata + 2, host.buffer_depth);
+ return -1;
+ }
+
+ /* Write MEI header */
+ mei_write_dword_ptr(mei, MEI_H_CB_WW);
+ ndata--;
+
+ /* Write MKHI header */
+ mei_write_dword_ptr(mkhi, MEI_H_CB_WW);
+ ndata--;
+
+ /* Write message data */
+ data = req_data;
+ for (n = 0; n < ndata; ++n)
+ write_cb(*data++);
+
+ /* Generate interrupt to the ME */
+ read_host_csr(&host);
+ host.interrupt_generate = 1;
+ write_host_csr(&host);
+
+ /* Make sure ME is ready after sending request data */
+ return mei_wait_for_me_ready();
+}
+
+static int mei_recv_msg(struct mkhi_header *mkhi,
+ void *rsp_data, int rsp_bytes)
+{
+ struct mei_header mei_rsp;
+ struct mkhi_header mkhi_rsp;
+ struct mei_csr me, host;
+ unsigned ndata, n/*, me_data_len*/;
+ unsigned expected;
+ u32 *data;
+
+ /* Total number of dwords to read from circular buffer */
+ expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2;
+ if (rsp_bytes & 3)
+ expected++;
+
+ /*
+ * The interrupt status bit does not appear to indicate that the
+ * message has actually been received. Instead we wait until the
+ * expected number of dwords are present in the circular buffer.
+ */
+ for (n = ME_RETRY; n; --n) {
+ read_me_csr(&me);
+ if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected)
+ break;
+ udelay(ME_DELAY);
+ }
+ if (!n) {
+ printk(BIOS_ERR, "ME: timeout waiting for data: expected "
+ "%u, available %u\n", expected,
+ me.buffer_write_ptr - me.buffer_read_ptr);
+ return -1;
+ }
+
+ /* Read and verify MEI response header from the ME */
+ mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW);
+ if (!mei_rsp.is_complete) {
+ printk(BIOS_ERR, "ME: response is not complete\n");
+ return -1;
+ }
+
+ /* Handle non-dword responses and expect at least MKHI header */
+ ndata = mei_rsp.length >> 2;
+ if (mei_rsp.length & 3)
+ ndata++;
+ if (ndata != (expected - 1)) {
+ printk(BIOS_ERR, "ME: response is missing data %d != %d\n",
+ ndata, (expected - 1));
+ return -1;
+ }
+
+ /* Read and verify MKHI response header from the ME */
+ mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW);
+ if (!mkhi_rsp.is_response ||
+ mkhi->group_id != mkhi_rsp.group_id ||
+ mkhi->command != mkhi_rsp.command) {
+ printk(BIOS_ERR, "ME: invalid response, group %u ?= %u,"
+ "command %u ?= %u, is_response %u\n", mkhi->group_id,
+ mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command,
+ mkhi_rsp.is_response);
+ return -1;
+ }
+ ndata--; /* MKHI header has been read */
+
+ /* Make sure caller passed a buffer with enough space */
+ if (ndata != (rsp_bytes >> 2)) {
+ printk(BIOS_ERR, "ME: not enough room in response buffer: "
+ "%u != %u\n", ndata, rsp_bytes >> 2);
+ return -1;
+ }
+
+ /* Read response data from the circular buffer */
+ data = rsp_data;
+ for (n = 0; n < ndata; ++n)
+ *data++ = read_cb();
+
+ /* Tell the ME that we have consumed the response */
+ read_host_csr(&host);
+ host.interrupt_status = 1;
+ host.interrupt_generate = 1;
+ write_host_csr(&host);
+
+ return mei_wait_for_me_ready();
+}
+
+static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi,
+ void *req_data, void *rsp_data, int rsp_bytes)
+{
+ if (mei_send_msg(mei, mkhi, req_data) < 0)
+ return -1;
+ if (mei_recv_msg(mkhi, rsp_data, rsp_bytes) < 0)
+ return -1;
+ return 0;
+}
+
+/* Send END OF POST message to the ME */
+int mkhi_end_of_post(void)
+{
+ struct mkhi_header mkhi = {
+ .group_id = MKHI_GROUP_ID_GEN,
+ .command = MKHI_END_OF_POST,
+ };
+ struct mei_header mei = {
+ .is_complete = 1,
+ .host_address = MEI_HOST_ADDRESS,
+ .client_address = MEI_ADDRESS_MKHI,
+ .length = sizeof(mkhi),
+ };
+
+ u32 eop_ack;
+
+ /* Send request and wait for response */
+ printk(BIOS_NOTICE, "ME: %s\n", __FUNCTION__);
+ if (mei_sendrecv(&mei, &mkhi, NULL, &eop_ack, sizeof(eop_ack)) < 0) {
+ printk(BIOS_ERR, "ME: END OF POST message failed\n");
+ return -1;
+ }
+
+ printk(BIOS_INFO, "ME: END OF POST message successful (%d)\n", eop_ack);
+ return 0;
+}
+
+#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) && !defined(__SMM__)
+static inline void print_cap(const char *name, int state)
+{
+ printk(BIOS_DEBUG, "ME Capability: %-41s : %sabled\n",
+ name, state ? " en" : "dis");
+}
+
+static void me_print_fw_version(mbp_fw_version_name *vers_name)
+{
+ if (!vers_name->major_version) {
+ printk(BIOS_ERR, "ME: mbp missing version report\n");
+ return;
+ }
+
+ printk(BIOS_DEBUG, "ME: found version %d.%d.%d.%d\n",
+ vers_name->major_version, vers_name->minor_version,
+ vers_name->hotfix_version, vers_name->build_version);
+}
+
+/* Get ME Firmware Capabilities */
+static int mkhi_get_fwcaps(mefwcaps_sku *cap)
+{
+ u32 rule_id = 0;
+ struct me_fwcaps cap_msg;
+ struct mkhi_header mkhi = {
+ .group_id = MKHI_GROUP_ID_FWCAPS,
+ .command = MKHI_FWCAPS_GET_RULE,
+ };
+ struct mei_header mei = {
+ .is_complete = 1,
+ .host_address = MEI_HOST_ADDRESS,
+ .client_address = MEI_ADDRESS_MKHI,
+ .length = sizeof(mkhi) + sizeof(rule_id),
+ };
+
+ /* Send request and wait for response */
+ if (mei_sendrecv(&mei, &mkhi, &rule_id, &cap_msg, sizeof(cap_msg))
+ < 0) {
+ printk(BIOS_ERR, "ME: GET FWCAPS message failed\n");
+ return -1;
+ }
+ *cap = cap_msg.caps_sku;
+ return 0;
+}
+
+/* Get ME Firmware Capabilities */
+static void me_print_fwcaps(mbp_fw_caps *caps_section)
+{
+ mefwcaps_sku *cap = &caps_section->fw_capabilities;
+ if (!caps_section->available) {
+ printk(BIOS_ERR, "ME: mbp missing fwcaps report\n");
+ if (mkhi_get_fwcaps(cap))
+ return;
+ }
+
+ print_cap("Full Network manageability", cap->full_net);
+ print_cap("Regular Network manageability", cap->std_net);
+ print_cap("Manageability", cap->manageability);
+ print_cap("Small business technology", cap->small_business);
+ print_cap("Level III manageability", cap->l3manageability);
+ print_cap("IntelR Anti-Theft (AT)", cap->intel_at);
+ print_cap("IntelR Capability Licensing Service (CLS)", cap->intel_cls);
+ print_cap("IntelR Power Sharing Technology (MPC)", cap->intel_mpc);
+ print_cap("ICC Over Clocking", cap->icc_over_clocking);
+ print_cap("Protected Audio Video Path (PAVP)", cap->pavp);
+ print_cap("IPV6", cap->ipv6);
+ print_cap("KVM Remote Control (KVM)", cap->kvm);
+ print_cap("Outbreak Containment Heuristic (OCH)", cap->och);
+ print_cap("Virtual LAN (VLAN)", cap->vlan);
+ print_cap("TLS", cap->tls);
+ print_cap("Wireless LAN (WLAN)", cap->wlan);
+}
+#endif
+
+/* Tell ME to issue a global reset */
+int mkhi_global_reset(void)
+{
+ struct me_global_reset reset = {
+ .request_origin = GLOBAL_RESET_BIOS_POST,
+ .reset_type = CBM_RR_GLOBAL_RESET,
+ };
+ struct mkhi_header mkhi = {
+ .group_id = MKHI_GROUP_ID_CBM,
+ .command = MKHI_GLOBAL_RESET,
+ };
+ struct mei_header mei = {
+ .is_complete = 1,
+ .length = sizeof(mkhi) + sizeof(reset),
+ .host_address = MEI_HOST_ADDRESS,
+ .client_address = MEI_ADDRESS_MKHI,
+ };
+
+ /* Send request and wait for response */
+ printk(BIOS_NOTICE, "ME: %s\n", __FUNCTION__);
+ if (mei_sendrecv(&mei, &mkhi, &reset, NULL, 0) < 0) {
+ /* No response means reset will happen shortly... */
+ hlt();
+ }
+
+ /* If the ME responded it rejected the reset request */
+ printk(BIOS_ERR, "ME: Global Reset failed\n");
+ return -1;
+}
+
+#ifdef __SMM__
+
+void intel_me_finalize_smm(void)
+{
+ struct me_hfs hfs;
+ u32 reg32;
+
+ mei_base_address =
+ pcie_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf;
+
+ /* S3 path will have hidden this device already */
+ if (!mei_base_address || mei_base_address == 0xfffffff0)
+ return;
+
+ /* Make sure ME is in a mode that expects EOP */
+ reg32 = pcie_read_config32(PCH_ME_DEV, PCI_ME_HFS);
+ memcpy(&hfs, &reg32, sizeof(u32));
+
+ /* Abort and leave device alone if not normal mode */
+ if (hfs.fpt_bad ||
+ hfs.working_state != ME_HFS_CWS_NORMAL ||
+ hfs.operation_mode != ME_HFS_MODE_NORMAL)
+ return;
+
+ /* Try to send EOP command so ME stops accepting other commands */
+ mkhi_end_of_post();
+
+ /* Make sure IO is disabled */
+ reg32 = pcie_read_config32(PCH_ME_DEV, PCI_COMMAND);
+ reg32 &= ~(PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
+ pcie_write_config32(PCH_ME_DEV, PCI_COMMAND, reg32);
+
+ /* Hide the PCI device */
+ RCBA32_OR(FD2, PCH_DISABLE_MEI1);
+}
+
+#else /* !__SMM__ */
+
+/* Determine the path that we should take based on ME status */
+static me_bios_path intel_me_path(device_t dev)
+{
+ me_bios_path path = ME_DISABLE_BIOS_PATH;
+ struct me_hfs hfs;
+ struct me_gmes gmes;
+
+#if CONFIG_HAVE_ACPI_RESUME
+ /* S3 wake skips all MKHI messages */
+ if (acpi_slp_type == 3) {
+ return ME_S3WAKE_BIOS_PATH;
+ }
+#endif
+
+ pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS);
+ pci_read_dword_ptr(dev, &gmes, PCI_ME_GMES);
+
+ /* Check and dump status */
+ intel_me_status(&hfs, &gmes);
+
+ /* Check for valid firmware */
+ if (hfs.fpt_bad)
+ return ME_ERROR_BIOS_PATH;
+
+ /* Check Current Working State */
+ switch (hfs.working_state) {
+ case ME_HFS_CWS_NORMAL:
+ path = ME_NORMAL_BIOS_PATH;
+ /* check if the MBP is ready */
+ if (!gmes.mbp_rdy) {
+ printk(BIOS_CRIT, "%s: mbp is not ready!\n",
+ __FUNCTION__);
+ return ME_ERROR_BIOS_PATH;
+ }
+ break;
+ case ME_HFS_CWS_REC:
+ path = ME_RECOVERY_BIOS_PATH;
+ break;
+ default:
+ path = ME_DISABLE_BIOS_PATH;
+ break;
+ }
+
+ /* Check Current Operation Mode */
+ switch (hfs.operation_mode) {
+ case ME_HFS_MODE_NORMAL:
+ break;
+ case ME_HFS_MODE_DEBUG:
+ case ME_HFS_MODE_DIS:
+ case ME_HFS_MODE_OVER_JMPR:
+ case ME_HFS_MODE_OVER_MEI:
+ default:
+ path = ME_DISABLE_BIOS_PATH;
+ break;
+ }
+
+ /* Check for any error code */
+ if (hfs.error_code)
+ path = ME_ERROR_BIOS_PATH;
+
+ return path;
+}
+
+/* Prepare ME for MEI messages */
+static int intel_mei_setup(device_t dev)
+{
+ struct resource *res;
+ struct mei_csr host;
+ u32 reg32;
+
+ /* Find the MMIO base for the ME interface */
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (!res || res->base == 0 || res->size == 0) {
+ printk(BIOS_DEBUG, "ME: MEI resource not present!\n");
+ return -1;
+ }
+ mei_base_address = res->base;
+
+ /* Ensure Memory and Bus Master bits are set */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ /* Clean up status for next message */
+ read_host_csr(&host);
+ host.interrupt_generate = 1;
+ host.ready = 1;
+ host.reset = 0;
+ write_host_csr(&host);
+
+ return 0;
+}
+
+/* Read the Extend register hash of ME firmware */
+static int intel_me_extend_valid(device_t dev)
+{
+ struct me_heres status;
+ u32 extend;
+ int i, count = 0;
+
+ pci_read_dword_ptr(dev, &status, PCI_ME_HERES);
+ if (!status.extend_feature_present) {
+ printk(BIOS_ERR, "ME: Extend Feature not present\n");
+ return -1;
+ }
+
+ if (!status.extend_reg_valid) {
+ printk(BIOS_ERR, "ME: Extend Register not valid\n");
+ return -1;
+ }
+
+ switch (status.extend_reg_algorithm) {
+ case PCI_ME_EXT_SHA1:
+ count = 5;
+ printk(BIOS_DEBUG, "ME: Extend SHA-1: ");
+ break;
+ case PCI_ME_EXT_SHA256:
+ count = 8;
+ printk(BIOS_DEBUG, "ME: Extend SHA-256: ");
+ break;
+ default:
+ printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n",
+ status.extend_reg_algorithm);
+ return -1;
+ }
+
+ /*
+ * TODO(dlaurie) Verify the hash against a saved good value.
+ */
+
+ for (i = 0; i < count; ++i) {
+ extend = pci_read_config32(dev, PCI_ME_HER(i));
+ printk(BIOS_DEBUG, "%08x", extend);
+ }
+ printk(BIOS_DEBUG, "\n");
+
+ return 0;
+}
+
+/* Hide the ME virtual PCI devices */
+static void intel_me_hide(device_t dev)
+{
+ dev->enabled = 0;
+ pch_enable(dev);
+}
+
+/* Check whether ME is present and do basic init */
+static void intel_me_init(device_t dev)
+{
+ me_bios_path path = intel_me_path(dev);
+ me_bios_payload mbp_data;
+
+ /* Do initial setup and determine the BIOS path */
+ printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]);
+
+ switch (path) {
+ case ME_S3WAKE_BIOS_PATH:
+ intel_me_hide(dev);
+ break;
+
+ case ME_NORMAL_BIOS_PATH:
+ /* Validate the extend register */
+ if (intel_me_extend_valid(dev) < 0)
+ break; /* TODO: force recovery mode */
+
+ /* Prepare MEI MMIO interface */
+ if (intel_mei_setup(dev) < 0)
+ break;
+
+ if(intel_me_read_mbp(&mbp_data))
+ break;
+
+#if CONFIG_CHROMEOS && 0 /* DISABLED */
+ /*
+ * Unlock ME in recovery mode.
+ */
+ if (recovery_mode_enabled()) {
+ /* Unlock ME flash region */
+ mkhi_hmrfpo_enable();
+
+ /* Issue global reset */
+ mkhi_global_reset();
+ return;
+ }
+#endif
+
+#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG)
+ me_print_fw_version(&mbp_data.fw_version_name);
+ me_print_fwcaps(&mbp_data.fw_caps_sku);
+#endif
+ /* Tell ME that BIOS is done */
+ mkhi_end_of_post();
+ /* Hide the virtual PCI device */
+ intel_me_hide(dev);
+ break;
+
+ case ME_ERROR_BIOS_PATH:
+ case ME_RECOVERY_BIOS_PATH:
+ case ME_DISABLE_BIOS_PATH:
+ case ME_FIRMWARE_UPDATE_BIOS_PATH:
+ /*
+ * TODO(dlaurie) Force recovery mode if ME is unhappy?
+ */
+ break;
+ }
+}
+
+static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations pci_ops = {
+ .set_subsystem = set_subsystem,
+};
+
+static struct device_operations device_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = intel_me_init,
+ .scan_bus = scan_static_bus,
+ .ops_pci = &pci_ops,
+};
+
+static const struct pci_driver intel_me __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1e3a,
+};
+
+/******************************************************************************
+ * */
+static u32 me_to_host_words_pending(void)
+{
+ struct mei_csr me;
+ read_me_csr(&me);
+ if (!me.ready)
+ return 0;
+ return (me.buffer_write_ptr - me.buffer_read_ptr) &
+ (me.buffer_depth - 1);
+}
+
+#if 0
+/* This function is not yet being used, keep it in for the future. */
+static u32 host_to_me_words_room(void)
+{
+ struct mei_csr csr;
+
+ read_me_csr(&csr);
+ if (!csr.ready)
+ return 0;
+
+ read_host_csr(&csr);
+ return (csr.buffer_read_ptr - csr.buffer_write_ptr - 1) &
+ (csr.buffer_depth - 1);
+}
+#endif
+/*
+ * mbp seems to be following its own flow, let's retrieve it in a dedicated
+ * function.
+ */
+static int intel_me_read_mbp(me_bios_payload *mbp_data)
+{
+ mbp_header mbp_hdr;
+ mbp_item_header mbp_item_hdr;
+ u32 me2host_pending;
+ u32 mbp_item_id;
+ struct mei_csr host;
+
+ me2host_pending = me_to_host_words_pending();
+ if (!me2host_pending) {
+ printk(BIOS_ERR, "ME: no mbp data!\n");
+ return -1;
+ }
+
+ /* we know for sure that at least the header is there */
+ mei_read_dword_ptr(&mbp_hdr, MEI_ME_CB_RW);
+
+ if ((mbp_hdr.num_entries > (mbp_hdr.mbp_size / 2)) ||
+ (me2host_pending < mbp_hdr.mbp_size)) {
+ printk(BIOS_ERR, "ME: mbp of %d entries, total size %d words"
+ " buffer contains %d words\n",
+ mbp_hdr.num_entries, mbp_hdr.mbp_size,
+ me2host_pending);
+ return -1;
+ }
+
+ me2host_pending--;
+ memset(mbp_data, 0, sizeof(*mbp_data));
+
+ while (mbp_hdr.num_entries--) {
+ u32* copy_addr;
+ u32 copy_size, buffer_room;
+ void *p;
+
+ if (!me2host_pending) {
+ printk(BIOS_ERR, "ME: no mbp data %d entries to go!\n",
+ mbp_hdr.num_entries + 1);
+ return -1;
+ }
+
+ mei_read_dword_ptr(&mbp_item_hdr, MEI_ME_CB_RW);
+
+ if (mbp_item_hdr.length > me2host_pending) {
+ printk(BIOS_ERR, "ME: insufficient mbp data %d "
+ "entries to go!\n",
+ mbp_hdr.num_entries + 1);
+ return -1;
+ }
+
+ me2host_pending -= mbp_item_hdr.length;
+
+ mbp_item_id = (((u32)mbp_item_hdr.item_id) << 8) +
+ mbp_item_hdr.app_id;
+
+ copy_size = mbp_item_hdr.length - 1;
+
+#define SET_UP_COPY(field) { copy_addr = (u32 *)&mbp_data->field; \
+ buffer_room = sizeof(mbp_data->field) / sizeof(u32); \
+ break; \
+ }
+
+ p = &mbp_item_hdr;
+ printk(BIOS_INFO, "ME: MBP item header %8.8x\n", *((u32*)p));
+
+ switch(mbp_item_id) {
+ case 0x101:
+ SET_UP_COPY(fw_version_name);
+
+ case 0x102:
+ SET_UP_COPY(icc_profile);
+
+ case 0x103:
+ SET_UP_COPY(at_state);
+
+ case 0x201:
+ mbp_data->fw_caps_sku.available = 1;
+ SET_UP_COPY(fw_caps_sku.fw_capabilities);
+
+ case 0x301:
+ SET_UP_COPY(rom_bist_data);
+
+ case 0x401:
+ SET_UP_COPY(platform_key);
+
+ case 0x501:
+ mbp_data->fw_plat_type.available = 1;
+ SET_UP_COPY(fw_plat_type.rule_data);
+
+ case 0x601:
+ SET_UP_COPY(mfsintegrity);
+
+ default:
+ printk(BIOS_ERR, "ME: unknown mbp item id 0x%x!!!\n",
+ mbp_item_id);
+ return -1;
+ }
+
+ if (buffer_room != copy_size) {
+ printk(BIOS_ERR, "ME: buffer room %d != %d copy size"
+ " for item 0x%x!!!\n",
+ buffer_room, copy_size, mbp_item_id);
+ return -1;
+ }
+ while(copy_size--)
+ *copy_addr++ = read_cb();
+ }
+
+ read_host_csr(&host);
+ host.interrupt_generate = 1;
+ write_host_csr(&host);
+
+ {
+ int cntr = 0;
+ while(host.interrupt_generate) {
+ read_host_csr(&host);
+ cntr++;
+ }
+ printk(BIOS_SPEW, "ME: mbp read OK after %d cycles\n", cntr);
+ }
+
+ return 0;
+}
+
+#endif /* !__SMM__ */
diff --git a/src/southbridge/intel/bd82x6x/me_status.c b/src/southbridge/intel/bd82x6x/me_status.c
new file mode 100644
index 0000000000..b2f38d635f
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/me_status.c
@@ -0,0 +1,213 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <stdlib.h>
+#include <console/console.h>
+#include "me.h"
+
+#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG)
+/* HFS1[3:0] Current Working State Values */
+static const char *me_cws_values[] = {
+ [ME_HFS_CWS_RESET] = "Reset",
+ [ME_HFS_CWS_INIT] = "Initializing",
+ [ME_HFS_CWS_REC] = "Recovery",
+ [ME_HFS_CWS_NORMAL] = "Normal",
+ [ME_HFS_CWS_WAIT] = "Platform Disable Wait",
+ [ME_HFS_CWS_TRANS] = "OP State Transition",
+ [ME_HFS_CWS_INVALID] = "Invalid CPU Plugged In"
+};
+
+/* HFS1[8:6] Current Operation State Values */
+static const char *me_opstate_values[] = {
+ [ME_HFS_STATE_PREBOOT] = "Preboot",
+ [ME_HFS_STATE_M0_UMA] = "M0 with UMA",
+ [ME_HFS_STATE_M3] = "M3 without UMA",
+ [ME_HFS_STATE_M0] = "M0 without UMA",
+ [ME_HFS_STATE_BRINGUP] = "Bring up",
+ [ME_HFS_STATE_ERROR] = "M0 without UMA but with error"
+};
+
+/* HFS[19:16] Current Operation Mode Values */
+static const char *me_opmode_values[] = {
+ [ME_HFS_MODE_NORMAL] = "Normal",
+ [ME_HFS_MODE_DEBUG] = "Debug",
+ [ME_HFS_MODE_DIS] = "Soft Temporary Disable",
+ [ME_HFS_MODE_OVER_JMPR] = "Security Override via Jumper",
+ [ME_HFS_MODE_OVER_MEI] = "Security Override via MEI Message"
+};
+
+/* HFS[15:12] Error Code Values */
+static const char *me_error_values[] = {
+ [ME_HFS_ERROR_NONE] = "No Error",
+ [ME_HFS_ERROR_UNCAT] = "Uncategorized Failure",
+ [ME_HFS_ERROR_IMAGE] = "Image Failure",
+ [ME_HFS_ERROR_DEBUG] = "Debug Failure"
+};
+
+/* GMES[31:28] ME Progress Code */
+static const char *me_progress_values[] = {
+ [ME_GMES_PHASE_ROM] = "ROM Phase",
+ [ME_GMES_PHASE_BUP] = "BUP Phase",
+ [ME_GMES_PHASE_UKERNEL] = "uKernel Phase",
+ [ME_GMES_PHASE_POLICY] = "Policy Module",
+ [ME_GMES_PHASE_MODULE] = "Module Loading",
+ [ME_GMES_PHASE_UNKNOWN] = "Unknown",
+ [ME_GMES_PHASE_HOST] = "Host Communication"
+};
+
+/* GMES[27:24] Power Management Event */
+static const char *me_pmevent_values[] = {
+ [0x00] = "Clean Moff->Mx wake",
+ [0x01] = "Moff->Mx wake after an error",
+ [0x02] = "Clean global reset",
+ [0x03] = "Global reset after an error",
+ [0x04] = "Clean Intel ME reset",
+ [0x05] = "Intel ME reset due to exception",
+ [0x06] = "Pseudo-global reset",
+ [0x07] = "S0/M0->Sx/M3",
+ [0x08] = "Sx/M3->S0/M0",
+ [0x09] = "Non-power cycle reset",
+ [0x0a] = "Power cycle reset through M3",
+ [0x0b] = "Power cycle reset through Moff",
+ [0x0c] = "Sx/Mx->Sx/Moff"
+};
+
+/* Progress Code 0 states */
+static const char *me_progress_rom_values[] = {
+ [0x00] = "BEGIN",
+ [0x06] = "DISABLE"
+};
+
+/* Progress Code 1 states */
+static const char *me_progress_bup_values[] = {
+ [0x00] = "Initialization starts",
+ [0x01] = "Disable the host wake event",
+ [0x04] = "Flow determination start process",
+ [0x08] = "Error reading/matching the VSCC table in the descriptor",
+ [0x0a] = "Check to see if straps say ME DISABLED",
+ [0x0b] = "Timeout waiting for PWROK",
+ [0x0d] = "Possibly handle BUP manufacturing override strap",
+ [0x11] = "Bringup in M3",
+ [0x12] = "Bringup in M0",
+ [0x13] = "Flow detection error",
+ [0x15] = "M3 clock switching error",
+ [0x18] = "M3 kernel load",
+ [0x1c] = "T34 missing - cannot program ICC",
+ [0x1f] = "Waiting for DID BIOS message",
+ [0x20] = "Waiting for DID BIOS message failure",
+ [0x21] = "DID reported an error",
+ [0x22] = "Enabling UMA",
+ [0x23] = "Enabling UMA error",
+ [0x24] = "Sending DID Ack to BIOS",
+ [0x25] = "Sending DID Ack to BIOS error",
+ [0x26] = "Switching clocks in M0",
+ [0x27] = "Switching clocks in M0 error",
+ [0x28] = "ME in temp disable",
+ [0x32] = "M0 kernel load",
+};
+
+/* Progress Code 3 states */
+static const char *me_progress_policy_values[] = {
+ [0x00] = "Entery into Policy Module",
+ [0x03] = "Received S3 entry",
+ [0x04] = "Received S4 entry",
+ [0x05] = "Received S5 entry",
+ [0x06] = "Received UPD entry",
+ [0x07] = "Received PCR entry",
+ [0x08] = "Received NPCR entry",
+ [0x09] = "Received host wake",
+ [0x0a] = "Received AC<>DC switch",
+ [0x0b] = "Received DRAM Init Done",
+ [0x0c] = "VSCC Data not found for flash device",
+ [0x0d] = "VSCC Table is not valid",
+ [0x0e] = "Flash Partition Boundary is outside address space",
+ [0x0f] = "ME cannot access the chipset descriptor region",
+ [0x10] = "Required VSCC values for flash parts do not match",
+};
+#endif
+
+void intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes)
+{
+#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG)
+ /* Check Current States */
+ printk(BIOS_DEBUG, "ME: FW Partition Table : %s\n",
+ hfs->fpt_bad ? "BAD" : "OK");
+ printk(BIOS_DEBUG, "ME: Bringup Loader Failure : %s\n",
+ hfs->ft_bup_ld_flr ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: Firmware Init Complete : %s\n",
+ hfs->fw_init_complete ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: Manufacturing Mode : %s\n",
+ hfs->mfg_mode ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: Boot Options Present : %s\n",
+ hfs->boot_options_present ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: Update In Progress : %s\n",
+ hfs->update_in_progress ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: Current Working State : %s\n",
+ me_cws_values[hfs->working_state]);
+ printk(BIOS_DEBUG, "ME: Current Operation State : %s\n",
+ me_opstate_values[hfs->operation_state]);
+ printk(BIOS_DEBUG, "ME: Current Operation Mode : %s\n",
+ me_opmode_values[hfs->operation_mode]);
+ printk(BIOS_DEBUG, "ME: Error Code : %s\n",
+ me_error_values[hfs->error_code]);
+ printk(BIOS_DEBUG, "ME: Progress Phase : %s\n",
+ me_progress_values[gmes->progress_code]);
+ printk(BIOS_DEBUG, "ME: Power Management Event : %s\n",
+ me_pmevent_values[gmes->current_pmevent]);
+
+ printk(BIOS_DEBUG, "ME: Progress Phase State : ");
+ switch (gmes->progress_code) {
+ case ME_GMES_PHASE_ROM: /* ROM Phase */
+ printk(BIOS_DEBUG, "%s",
+ me_progress_rom_values[gmes->current_state]);
+ break;
+
+ case ME_GMES_PHASE_BUP: /* Bringup Phase */
+ if (gmes->current_state < ARRAY_SIZE(me_progress_bup_values)
+ && me_progress_bup_values[gmes->current_state])
+ printk(BIOS_DEBUG, "%s",
+ me_progress_bup_values[gmes->current_state]);
+ else
+ printk(BIOS_DEBUG, "0x%02x", gmes->current_state);
+ break;
+
+ case ME_GMES_PHASE_POLICY: /* Policy Module Phase */
+ if (gmes->current_state < ARRAY_SIZE(me_progress_policy_values)
+ && me_progress_policy_values[gmes->current_state])
+ printk(BIOS_DEBUG, "%s",
+ me_progress_policy_values[gmes->current_state]);
+ else
+ printk(BIOS_DEBUG, "0x%02x", gmes->current_state);
+ break;
+
+ case ME_GMES_PHASE_HOST: /* Host Communication Phase */
+ if (!gmes->current_state)
+ printk(BIOS_DEBUG, "Host communication established");
+ else
+ printk(BIOS_DEBUG, "0x%02x", gmes->current_state);
+ break;
+
+ default:
+ printk(BIOS_DEBUG, "Unknown 0x%02x", gmes->current_state);
+ }
+ printk(BIOS_DEBUG, "\n");
+#endif
+}
diff --git a/src/southbridge/intel/bd82x6x/nvs.h b/src/southbridge/intel/bd82x6x/nvs.h
new file mode 100644
index 0000000000..3928804776
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/nvs.h
@@ -0,0 +1,139 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2011 Google Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "vendorcode/google/chromeos/gnvs.h"
+typedef struct {
+ /* Miscellaneous */
+ u16 osys; /* 0x00 - Operating System */
+ u8 smif; /* 0x02 - SMI function call ("TRAP") */
+ u8 prm0; /* 0x03 - SMI function call parameter */
+ u8 prm1; /* 0x04 - SMI function call parameter */
+ u8 scif; /* 0x05 - SCI function call (via _L00) */
+ u8 prm2; /* 0x06 - SCI function call parameter */
+ u8 prm3; /* 0x07 - SCI function call parameter */
+ u8 lckf; /* 0x08 - Global Lock function for EC */
+ u8 prm4; /* 0x09 - Lock function parameter */
+ u8 prm5; /* 0x0a - Lock function parameter */
+ u32 p80d; /* 0x0b - Debug port (IO 0x80) value */
+ u8 lids; /* 0x0f - LID state (open = 1) */
+ u8 pwrs; /* 0x10 - Power state (AC = 1) */
+ /* Thermal policy */
+ u8 tlvl; /* 0x11 - Throttle Level Limit */
+ u8 flvl; /* 0x12 - Current FAN Level */
+ u8 tcrt; /* 0x13 - Critical Threshold */
+ u8 tpsv; /* 0x14 - Passive Threshold */
+ u8 tmax; /* 0x15 - CPU Tj_max */
+ u8 f0of; /* 0x16 - FAN 0 OFF Threshold */
+ u8 f0on; /* 0x17 - FAN 0 ON Threshold */
+ u8 f0pw; /* 0x18 - FAN 0 PWM value */
+ u8 f1of; /* 0x19 - FAN 1 OFF Threshold */
+ u8 f1on; /* 0x1a - FAN 1 ON Threshold */
+ u8 f1pw; /* 0x1b - FAN 1 PWM value */
+ u8 f2of; /* 0x1c - FAN 2 OFF Threshold */
+ u8 f2on; /* 0x1d - FAN 2 ON Threshold */
+ u8 f2pw; /* 0x1e - FAN 2 PWM value */
+ u8 f3of; /* 0x1f - FAN 3 OFF Threshold */
+ u8 f3on; /* 0x20 - FAN 3 ON Threshold */
+ u8 f3pw; /* 0x21 - FAN 3 PWM value */
+ u8 f4of; /* 0x22 - FAN 4 OFF Threshold */
+ u8 f4on; /* 0x23 - FAN 4 ON Threshold */
+ u8 f4pw; /* 0x24 - FAN 4 PWM value */
+ u8 rsvd3[3];
+ /* Processor Identification */
+ u8 apic; /* 0x28 - APIC enabled */
+ u8 mpen; /* 0x29 - MP capable/enabled */
+ u8 pcp0; /* 0x2a - PDC CPU/CORE 0 */
+ u8 pcp1; /* 0x2b - PDC CPU/CORE 1 */
+ u8 ppcm; /* 0x2c - Max. PPC state */
+ u8 pcnt; /* 0x2d - Processor Count */
+ u8 rsvd4[4];
+ /* Super I/O & CMOS config */
+ u8 natp; /* 0x32 - SIO type */
+ u8 s5u0; /* 0x33 - Enable USB0 in S5 */
+ u8 s5u1; /* 0x34 - Enable USB1 in S5 */
+ u8 s3u0; /* 0x35 - Enable USB0 in S3 */
+ u8 s3u1; /* 0x36 - Enable USB1 in S3 */
+ u8 s33g; /* 0x37 - Enable S3 in 3G */
+ u32 cmem; /* 0x38 - CBMEM TOC */
+ /* Integrated Graphics Device */
+ u8 igds; /* 0x3c - IGD state */
+ u8 tlst; /* 0x3d - Display Toggle List Pointer */
+ u8 cadl; /* 0x3e - currently attached devices */
+ u8 padl; /* 0x3f - previously attached devices */
+ u16 cste; /* 0x40 - current display state */
+ u16 nste; /* 0x42 - next display state */
+ u16 sste; /* 0x44 - set display state */
+ u8 ndid; /* 0x46 - number of device ids */
+ u32 did[5]; /* 0x47 - 5b device id 1..5 */
+ u8 rsvd5[0x9];
+ /* Backlight Control */
+ u8 blcs; /* 0x64 - Backlight Control possible */
+ u8 brtl;
+ u8 odds;
+ u8 rsvd6[0x7];
+ /* Ambient Light Sensors*/
+ u8 alse; /* 0x6e - ALS enable */
+ u8 alaf;
+ u8 llow;
+ u8 lhih;
+ u8 rsvd7[0x6];
+ /* EMA */
+ u8 emae; /* 0x78 - EMA enable */
+ u16 emap;
+ u16 emal;
+ u8 rsvd8[0x5];
+ /* MEF */
+ u8 mefe; /* 0x82 - MEF enable */
+ u8 rsvd9[0x9];
+ /* TPM support */
+ u8 tpmp; /* 0x8c - TPM */
+ u8 tpme;
+ u8 rsvd10[8];
+ /* SATA */
+ u8 gtf0[7]; /* 0x96 - GTF task file buffer for port 0 */
+ u8 gtf1[7];
+ u8 gtf2[7];
+ u8 idem;
+ u8 idet;
+ u8 rsvd11[7];
+ /* IGD OpRegion (not implemented yet) */
+ u32 aslb; /* 0xb4 - IGD OpRegion Base Address */
+ u8 ibtt;
+ u8 ipat;
+ u8 itvf;
+ u8 itvm;
+ u8 ipsc;
+ u8 iblc;
+ u8 ibia;
+ u8 issc;
+ u8 i409;
+ u8 i509;
+ u8 i609;
+ u8 i709;
+ u8 idmm;
+ u8 idms;
+ u8 if1e;
+ u8 hvco;
+ u32 nxd[8];
+ u8 rsvd12[8];
+ /* ChromeOS specific (starts at 0xf0)*/
+ chromeos_acpi_t chromeos;
+} __attribute__((packed)) global_nvs_t;
+
diff --git a/src/southbridge/intel/bd82x6x/pch.c b/src/southbridge/intel/bd82x6x/pch.c
new file mode 100644
index 0000000000..e83c2e6478
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/pch.c
@@ -0,0 +1,234 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <delay.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include "pch.h"
+
+static int pch_revision_id = -1;
+
+int pch_silicon_revision(void)
+{
+ if (pch_revision_id < 0)
+ pch_revision_id = pci_read_config8(
+ dev_find_slot(0, PCI_DEVFN(0x1f, 0)),
+ PCI_REVISION_ID);
+ return pch_revision_id;
+}
+
+/* Set bit in Function Disble register to hide this device */
+static void pch_hide_devfn(unsigned devfn)
+{
+ switch (devfn) {
+ case PCI_DEVFN(22, 0): /* MEI #1 */
+ RCBA32_OR(FD2, PCH_DISABLE_MEI1);
+ break;
+ case PCI_DEVFN(22, 1): /* MEI #2 */
+ RCBA32_OR(FD2, PCH_DISABLE_MEI2);
+ break;
+ case PCI_DEVFN(22, 2): /* IDE-R */
+ RCBA32_OR(FD2, PCH_DISABLE_IDER);
+ break;
+ case PCI_DEVFN(22, 3): /* KT */
+ RCBA32_OR(FD2, PCH_DISABLE_KT);
+ break;
+ case PCI_DEVFN(25, 0): /* Gigabit Ethernet */
+ RCBA32_OR(BUC, PCH_DISABLE_GBE);
+ break;
+ case PCI_DEVFN(26, 0): /* EHCI #2 */
+ RCBA32_OR(FD, PCH_DISABLE_EHCI2);
+ break;
+ case PCI_DEVFN(27, 0): /* HD Audio Controller */
+ RCBA32_OR(FD, PCH_DISABLE_HD_AUDIO);
+ break;
+ case PCI_DEVFN(28, 0): /* PCI Express Root Port 1 */
+ case PCI_DEVFN(28, 1): /* PCI Express Root Port 2 */
+ case PCI_DEVFN(28, 2): /* PCI Express Root Port 3 */
+ case PCI_DEVFN(28, 3): /* PCI Express Root Port 4 */
+ case PCI_DEVFN(28, 4): /* PCI Express Root Port 5 */
+ case PCI_DEVFN(28, 5): /* PCI Express Root Port 6 */
+ case PCI_DEVFN(28, 6): /* PCI Express Root Port 7 */
+ case PCI_DEVFN(28, 7): /* PCI Express Root Port 8 */
+ RCBA32_OR(FD, PCH_DISABLE_PCIE(PCI_FUNC(devfn)));
+ break;
+ case PCI_DEVFN(29, 0): /* EHCI #1 */
+ RCBA32_OR(FD, PCH_DISABLE_EHCI1);
+ break;
+ case PCI_DEVFN(30, 0): /* PCI-to-PCI Bridge */
+ RCBA32_OR(FD, PCH_DISABLE_P2P);
+ break;
+ case PCI_DEVFN(31, 0): /* LPC */
+ RCBA32_OR(FD, PCH_DISABLE_LPC);
+ break;
+ case PCI_DEVFN(31, 2): /* SATA #1 */
+ RCBA32_OR(FD, PCH_DISABLE_SATA1);
+ break;
+ case PCI_DEVFN(31, 3): /* SMBUS */
+ RCBA32_OR(FD, PCH_DISABLE_SMBUS);
+ break;
+ case PCI_DEVFN(31, 5): /* SATA #22 */
+ RCBA32_OR(FD, PCH_DISABLE_SATA2);
+ break;
+ case PCI_DEVFN(31, 6): /* Thermal Subsystem */
+ RCBA32_OR(FD, PCH_DISABLE_THERMAL);
+ break;
+ }
+}
+
+#define IOBP_RETRY 1000
+static inline int iobp_poll(void)
+{
+ unsigned try = IOBP_RETRY;
+ u32 data;
+
+ while (try--) {
+ data = RCBA32(IOBPS);
+ if ((data & 1) == 0)
+ return 1;
+ udelay(10);
+ }
+
+ printk(BIOS_ERR, "IOBP timeout\n");
+ return 0;
+}
+
+void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue)
+{
+ u32 data;
+
+ /* Set the address */
+ RCBA32(IOBPIRI) = address;
+
+ /* READ OPCODE */
+ if (pch_silicon_revision() >= PCH_STEP_B0)
+ RCBA32(IOBPS) = IOBPS_RW_BX;
+ else
+ RCBA32(IOBPS) = IOBPS_READ_AX;
+ if (!iobp_poll())
+ return;
+
+ /* Read IOBP data */
+ data = RCBA32(IOBPD);
+ if (!iobp_poll())
+ return;
+
+ /* Check for successful transaction */
+ if ((RCBA32(IOBPS) & 0x6) != 0) {
+ printk(BIOS_ERR, "IOBP read 0x%08x failed\n", address);
+ return;
+ }
+
+ /* Update the data */
+ data &= andvalue;
+ data |= orvalue;
+
+ /* WRITE OPCODE */
+ if (pch_silicon_revision() >= PCH_STEP_B0)
+ RCBA32(IOBPS) = IOBPS_RW_BX;
+ else
+ RCBA32(IOBPS) = IOBPS_WRITE_AX;
+ if (!iobp_poll())
+ return;
+
+ /* Write IOBP data */
+ RCBA32(IOBPD) = data;
+ if (!iobp_poll())
+ return;
+}
+
+/* Check if any port in set X to X+3 is enabled */
+static int pch_pcie_check_set_enabled(device_t dev)
+{
+ device_t port;
+ int port_func;
+ int dev_func = PCI_FUNC(dev->path.pci.devfn);
+
+ printk(BIOS_DEBUG, "%s: check set enabled\n", dev_path(dev));
+
+ /* Go through static device tree list of devices
+ * because enumeration is still in progress */
+ for (port = all_devices; port; port = port->next) {
+ /* Only care about PCIe root ports */
+ if (PCI_SLOT(port->path.pci.devfn) !=
+ PCI_SLOT(dev->path.pci.devfn))
+ continue;
+
+ /* Check if port is in range and enabled */
+ port_func = PCI_FUNC(port->path.pci.devfn);
+ if (port_func >= dev_func &&
+ port_func < (dev_func + 4) &&
+ port->enabled)
+ return 1;
+ }
+
+ /* None of the ports in this set are enabled */
+ return 0;
+}
+
+void pch_enable(device_t dev)
+{
+ u32 reg32;
+
+ if (!dev->enabled) {
+ printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev));
+
+ /*
+ * PCIE Power Savings for stepping B1+:
+ *
+ * If PCIe 0-3 disabled set Function 0 0xE2[0] = 1
+ * If PCIe 4-7 disabled set Function 4 0xE2[0] = 1
+ *
+ * This check is done here instead of pcie driver
+ * because the pcie driver enable() handler is not
+ * called unless the device is enabled.
+ */
+ if (pch_silicon_revision() >= PCH_STEP_B1 &&
+ PCI_SLOT(dev->path.pci.devfn) == PCH_PCIE_DEV_SLOT &&
+ (PCI_FUNC(dev->path.pci.devfn) == 0 ||
+ PCI_FUNC(dev->path.pci.devfn) == 4)) {
+ if (!pch_pcie_check_set_enabled(dev)) {
+ u8 reg8 = pci_read_config8(dev, 0xe2);
+ reg8 |= 1;
+ pci_write_config8(dev, 0xe2, reg8);
+ }
+ }
+
+ /* Ensure memory, io, and bus master are all disabled */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 &= ~(PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO );
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ /* Hide this device if possible */
+ pch_hide_devfn(dev->path.pci.devfn);
+ } else {
+ /* Enable SERR */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 |= PCI_COMMAND_SERR;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+ }
+}
+
+struct chip_operations southbridge_intel_bd82x6x_ops = {
+ CHIP_NAME("Intel Series 6 (" CONFIG_PCH_CHIP_NAME ") Southbridge")
+ .enable_dev = pch_enable,
+};
diff --git a/src/southbridge/intel/bd82x6x/pch.h b/src/southbridge/intel/bd82x6x/pch.h
new file mode 100644
index 0000000000..80b09e2592
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/pch.h
@@ -0,0 +1,514 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2011 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SOUTHBRIDGE_INTEL_BD82X6X_PCH_H
+#define SOUTHBRIDGE_INTEL_BD82X6X_PCH_H
+
+/* PCH stepping values for LPC device */
+#define PCH_STEP_A0 0
+#define PCH_STEP_A1 1
+#define PCH_STEP_B0 2
+#define PCH_STEP_B1 3
+#define PCH_STEP_B2 4
+#define PCH_STEP_B3 5
+
+/*
+ * It does not matter where we put the SMBus I/O base, as long as we
+ * keep it consistent and don't interfere with other devices. Stage2
+ * will relocate this anyways.
+ * Our solution is to have SMB initialization move the I/O to SMBUS_IO_BASE
+ * again. But handling static BARs is a generic problem that should be
+ * solved in the device allocator.
+ */
+#define SMBUS_IO_BASE 0x0400
+#define SMBUS_SLAVE_ADDR 0x24
+/* TODO Make sure these don't get changed by stage2 */
+#define DEFAULT_GPIOBASE 0x0480
+#define DEFAULT_PMBASE 0x0500
+
+#define HPET_ADDR 0xfed00000
+#define DEFAULT_RCBA 0xfed1c000
+
+#ifndef __ACPI__
+#define DEBUG_PERIODIC_SMIS 0
+
+#if defined (__SMM__) && !defined(__ASSEMBLER__)
+void intel_pch_finalize_smm(void);
+#endif
+
+#if !defined(__ASSEMBLER__) && !defined(__ROMCC__)
+#if !defined(__PRE_RAM__) && !defined(__SMM__)
+#include "chip.h"
+int pch_silicon_revision(void);
+void pch_enable(device_t dev);
+void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue);
+#else
+void enable_smbus(void);
+void enable_usb_bar(void);
+int smbus_read_byte(unsigned device, unsigned address);
+#endif
+#endif
+
+#define MAINBOARD_POWER_OFF 0
+#define MAINBOARD_POWER_ON 1
+#define MAINBOARD_POWER_KEEP 2
+
+#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
+#endif
+
+/* PCI Configuration Space (D30:F0): PCI2PCI */
+#define PSTS 0x06
+#define SMLT 0x1b
+#define SECSTS 0x1e
+#define INTR 0x3c
+#define BCTRL 0x3e
+#define SBR (1 << 6)
+#define SEE (1 << 1)
+#define PERE (1 << 0)
+
+#define PCH_EHCI1_DEV PCI_DEV(0, 0x1d, 0)
+#define PCH_EHCI2_DEV PCI_DEV(0, 0x1a, 0)
+#define PCH_ME_DEV PCI_DEV(0, 0x16, 0)
+#define PCH_PCIE_DEV_SLOT 28
+
+/* PCI Configuration Space (D31:F0): LPC */
+#define PCH_LPC_DEV PCI_DEV(0, 0x1f, 0)
+#define SERIRQ_CNTL 0x64
+
+#define GEN_PMCON_1 0xa0
+#define GEN_PMCON_2 0xa2
+#define GEN_PMCON_3 0xa4
+#define ETR3 0xac
+#define ETR3_CWORWRE (1 << 18)
+#define ETR3_CF9GR (1 << 20)
+
+/* GEN_PMCON_3 bits */
+#define RTC_BATTERY_DEAD (1 << 2)
+#define RTC_POWER_FAILED (1 << 1)
+#define SLEEP_AFTER_POWER_FAIL (1 << 0)
+
+#define PMBASE 0x40
+#define ACPI_CNTL 0x44
+#define BIOS_CNTL 0xDC
+#define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */
+#define GPIO_CNTL 0x4C /* LPC GPIO Control Register */
+#define GPIO_ROUT 0xb8
+
+#define PIRQA_ROUT 0x60
+#define PIRQB_ROUT 0x61
+#define PIRQC_ROUT 0x62
+#define PIRQD_ROUT 0x63
+#define PIRQE_ROUT 0x68
+#define PIRQF_ROUT 0x69
+#define PIRQG_ROUT 0x6A
+#define PIRQH_ROUT 0x6B
+
+#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */
+#define LPC_EN 0x82 /* LPC IF Enables Register */
+#define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */
+#define CNF1_LPC_EN (1 << 12) /* 0x2e/0x2f */
+#define MC_LPC_EN (1 << 11) /* 0x62/0x66 */
+#define KBC_LPC_EN (1 << 10) /* 0x60/0x64 */
+#define GAMEH_LPC_EN (1 << 9) /* 0x208/0x20f */
+#define GAMEL_LPC_EN (1 << 8) /* 0x200/0x207 */
+#define FDD_LPC_EN (1 << 3) /* LPC_IO_DEC[12] */
+#define LPT_LPC_EN (1 << 2) /* LPC_IO_DEC[9:8] */
+#define COMB_LPC_EN (1 << 1) /* LPC_IO_DEC[6:4] */
+#define COMA_LPC_EN (1 << 0) /* LPC_IO_DEC[3:2] */
+#define LPC_GEN1_DEC 0x84 /* LPC IF Generic Decode Range 1 */
+#define LPC_GEN2_DEC 0x88 /* LPC IF Generic Decode Range 2 */
+#define LPC_GEN3_DEC 0x8c /* LPC IF Generic Decode Range 3 */
+#define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */
+
+/* PCI Configuration Space (D31:F1): IDE */
+#define PCH_IDE_DEV PCI_DEV(0, 0x1f, 1)
+#define PCH_SATA_DEV PCI_DEV(0, 0x1f, 2)
+#define PCH_SATA2_DEV PCI_DEV(0, 0x1f, 5)
+#define INTR_LN 0x3c
+#define IDE_TIM_PRI 0x40 /* IDE timings, primary */
+#define IDE_DECODE_ENABLE (1 << 15)
+#define IDE_SITRE (1 << 14)
+#define IDE_ISP_5_CLOCKS (0 << 12)
+#define IDE_ISP_4_CLOCKS (1 << 12)
+#define IDE_ISP_3_CLOCKS (2 << 12)
+#define IDE_RCT_4_CLOCKS (0 << 8)
+#define IDE_RCT_3_CLOCKS (1 << 8)
+#define IDE_RCT_2_CLOCKS (2 << 8)
+#define IDE_RCT_1_CLOCKS (3 << 8)
+#define IDE_DTE1 (1 << 7)
+#define IDE_PPE1 (1 << 6)
+#define IDE_IE1 (1 << 5)
+#define IDE_TIME1 (1 << 4)
+#define IDE_DTE0 (1 << 3)
+#define IDE_PPE0 (1 << 2)
+#define IDE_IE0 (1 << 1)
+#define IDE_TIME0 (1 << 0)
+#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */
+
+#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */
+#define IDE_SSDE1 (1 << 3)
+#define IDE_SSDE0 (1 << 2)
+#define IDE_PSDE1 (1 << 1)
+#define IDE_PSDE0 (1 << 0)
+
+#define IDE_SDMA_TIM 0x4a
+
+#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */
+#define SIG_MODE_SEC_NORMAL (0 << 18)
+#define SIG_MODE_SEC_TRISTATE (1 << 18)
+#define SIG_MODE_SEC_DRIVELOW (2 << 18)
+#define SIG_MODE_PRI_NORMAL (0 << 16)
+#define SIG_MODE_PRI_TRISTATE (1 << 16)
+#define SIG_MODE_PRI_DRIVELOW (2 << 16)
+#define FAST_SCB1 (1 << 15)
+#define FAST_SCB0 (1 << 14)
+#define FAST_PCB1 (1 << 13)
+#define FAST_PCB0 (1 << 12)
+#define SCB1 (1 << 3)
+#define SCB0 (1 << 2)
+#define PCB1 (1 << 1)
+#define PCB0 (1 << 0)
+
+#define SATA_SP 0xd0 /* Scratchpad */
+
+/* PCI Configuration Space (D31:F3): SMBus */
+#define PCH_SMBUS_DEV PCI_DEV(0, 0x1f, 3)
+#define SMB_BASE 0x20
+#define HOSTC 0x40
+#define SMB_RCV_SLVA 0x09
+
+/* HOSTC bits */
+#define I2C_EN (1 << 2)
+#define SMB_SMI_EN (1 << 1)
+#define HST_EN (1 << 0)
+
+/* SMBus I/O bits. */
+#define SMBHSTSTAT 0x0
+#define SMBHSTCTL 0x2
+#define SMBHSTCMD 0x3
+#define SMBXMITADD 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBBLKDAT 0x7
+#define SMBTRNSADD 0x9
+#define SMBSLVDATA 0xa
+#define SMLINK_PIN_CTL 0xe
+#define SMBUS_PIN_CTL 0xf
+
+#define SMBUS_TIMEOUT (10 * 1000 * 100)
+
+
+/* Southbridge IO BARs */
+
+#define GPIOBASE 0x48
+
+#define PMBASE 0x40
+
+/* Root Complex Register Block */
+#define RCBA 0xf0
+
+#define RCBA8(x) *((volatile u8 *)(DEFAULT_RCBA + x))
+#define RCBA16(x) *((volatile u16 *)(DEFAULT_RCBA + x))
+#define RCBA32(x) *((volatile u32 *)(DEFAULT_RCBA + x))
+
+#define RCBA_AND_OR(bits, x, and, or) \
+ RCBA##bits(x) = ((RCBA##bits(x) & (and)) | (or))
+#define RCBA8_AND_OR(x, and, or) RCBA_AND_OR(8, x, and, or)
+#define RCBA16_AND_OR(x, and, or) RCBA_AND_OR(16, x, and, or)
+#define RCBA32_AND_OR(x, and, or) RCBA_AND_OR(32, x, and, or)
+#define RCBA32_OR(x, or) RCBA_AND_OR(32, x, ~0UL, or)
+
+#define VCH 0x0000 /* 32bit */
+#define VCAP1 0x0004 /* 32bit */
+#define VCAP2 0x0008 /* 32bit */
+#define PVC 0x000c /* 16bit */
+#define PVS 0x000e /* 16bit */
+
+#define V0CAP 0x0010 /* 32bit */
+#define V0CTL 0x0014 /* 32bit */
+#define V0STS 0x001a /* 16bit */
+
+#define V1CAP 0x001c /* 32bit */
+#define V1CTL 0x0020 /* 32bit */
+#define V1STS 0x0026 /* 16bit */
+
+#define RCTCL 0x0100 /* 32bit */
+#define ESD 0x0104 /* 32bit */
+#define ULD 0x0110 /* 32bit */
+#define ULBA 0x0118 /* 64bit */
+
+#define RP1D 0x0120 /* 32bit */
+#define RP1BA 0x0128 /* 64bit */
+#define RP2D 0x0130 /* 32bit */
+#define RP2BA 0x0138 /* 64bit */
+#define RP3D 0x0140 /* 32bit */
+#define RP3BA 0x0148 /* 64bit */
+#define RP4D 0x0150 /* 32bit */
+#define RP4BA 0x0158 /* 64bit */
+#define HDD 0x0160 /* 32bit */
+#define HDBA 0x0168 /* 64bit */
+#define RP5D 0x0170 /* 32bit */
+#define RP5BA 0x0178 /* 64bit */
+#define RP6D 0x0180 /* 32bit */
+#define RP6BA 0x0188 /* 64bit */
+
+#define RPC 0x0224 /* 32bit */
+#define RPFN 0x0238 /* 32bit */
+
+#define TRSR 0x1e00 /* 8bit */
+#define TRCR 0x1e10 /* 64bit */
+#define TWDR 0x1e18 /* 64bit */
+
+#define IOTR0 0x1e80 /* 64bit */
+#define IOTR1 0x1e88 /* 64bit */
+#define IOTR2 0x1e90 /* 64bit */
+#define IOTR3 0x1e98 /* 64bit */
+
+#define TCTL 0x3000 /* 8bit */
+
+#define NOINT 0
+#define INTA 1
+#define INTB 2
+#define INTC 3
+#define INTD 4
+
+#define DIR_IDR 12 /* Interrupt D Pin Offset */
+#define DIR_ICR 8 /* Interrupt C Pin Offset */
+#define DIR_IBR 4 /* Interrupt B Pin Offset */
+#define DIR_IAR 0 /* Interrupt A Pin Offset */
+
+#define PIRQA 0
+#define PIRQB 1
+#define PIRQC 2
+#define PIRQD 3
+#define PIRQE 4
+#define PIRQF 5
+#define PIRQG 6
+#define PIRQH 7
+
+/* IO Buffer Programming */
+#define IOBPIRI 0x2330
+#define IOBPD 0x2334
+#define IOBPS 0x2338
+#define IOBPS_RW_BX ((1 << 9)|(1 << 10))
+#define IOBPS_WRITE_AX ((1 << 9)|(1 << 10))
+#define IOBPS_READ_AX ((1 << 8)|(1 << 9)|(1 << 10))
+
+#define D31IP 0x3100 /* 32bit */
+#define D31IP_TTIP 24 /* Thermal Throttle Pin */
+#define D31IP_SIP2 20 /* SATA Pin 2 */
+#define D31IP_SMIP 12 /* SMBUS Pin */
+#define D31IP_SIP 8 /* SATA Pin */
+#define D30IP 0x3104 /* 32bit */
+#define D30IP_PIP 0 /* PCI Bridge Pin */
+#define D29IP 0x3108 /* 32bit */
+#define D29IP_E1P 0 /* EHCI #1 Pin */
+#define D28IP 0x310c /* 32bit */
+#define D28IP_P8IP 28 /* PCI Express Port 8 */
+#define D28IP_P7IP 24 /* PCI Express Port 7 */
+#define D28IP_P6IP 20 /* PCI Express Port 6 */
+#define D28IP_P5IP 16 /* PCI Express Port 5 */
+#define D28IP_P4IP 12 /* PCI Express Port 4 */
+#define D28IP_P3IP 8 /* PCI Express Port 3 */
+#define D28IP_P2IP 4 /* PCI Express Port 2 */
+#define D28IP_P1IP 0 /* PCI Express Port 1 */
+#define D27IP 0x3110 /* 32bit */
+#define D27IP_ZIP 0 /* HD Audio Pin */
+#define D26IP 0x3114 /* 32bit */
+#define D26IP_E2P 0 /* EHCI #2 Pin */
+#define D25IP 0x3118 /* 32bit */
+#define D25IP_LIP 0 /* GbE LAN Pin */
+#define D22IP 0x3124 /* 32bit */
+#define D22IP_KTIP 12 /* KT Pin */
+#define D22IP_IDERIP 8 /* IDE-R Pin */
+#define D22IP_MEI2IP 4 /* MEI #2 Pin */
+#define D22IP_MEI1IP 0 /* MEI #1 Pin */
+#define D31IR 0x3140 /* 16bit */
+#define D30IR 0x3142 /* 16bit */
+#define D29IR 0x3144 /* 16bit */
+#define D28IR 0x3146 /* 16bit */
+#define D27IR 0x3148 /* 16bit */
+#define D26IR 0x314c /* 16bit */
+#define D25IR 0x3150 /* 16bit */
+#define D22IR 0x315c /* 16bit */
+#define OIC 0x31fe /* 16bit */
+
+#define DIR_ROUTE(x,a,b,c,d) \
+ RCBA32(x) = (((d) << DIR_IDR) | ((c) << DIR_ICR) | \
+ ((b) << DIR_IBR) | ((a) << DIR_IAR))
+
+#define RC 0x3400 /* 32bit */
+#define HPTC 0x3404 /* 32bit */
+#define GCS 0x3410 /* 32bit */
+#define BUC 0x3414 /* 32bit */
+#define PCH_DISABLE_GBE (1 << 5)
+#define FD 0x3418 /* 32bit */
+#define DISPBDF 0x3424 /* 16bit */
+#define FD2 0x3428 /* 32bit */
+#define CG 0x341c /* 32bit */
+
+/* Function Disable 1 RCBA 0x3418 */
+#define PCH_DISABLE_ALWAYS ((1 << 0)|(1 << 26)|(1 << 27))
+#define PCH_DISABLE_P2P (1 << 1)
+#define PCH_DISABLE_SATA1 (1 << 2)
+#define PCH_DISABLE_SMBUS (1 << 3)
+#define PCH_DISABLE_HD_AUDIO (1 << 4)
+#define PCH_DISABLE_EHCI2 (1 << 13)
+#define PCH_DISABLE_LPC (1 << 14)
+#define PCH_DISABLE_EHCI1 (1 << 15)
+#define PCH_DISABLE_PCIE(x) (1 << (16 + x))
+#define PCH_DISABLE_THERMAL (1 << 24)
+#define PCH_DISABLE_SATA2 (1 << 25)
+
+/* Function Disable 2 RCBA 0x3428 */
+#define PCH_DISABLE_KT (1 << 4)
+#define PCH_DISABLE_IDER (1 << 3)
+#define PCH_DISABLE_MEI2 (1 << 2)
+#define PCH_DISABLE_MEI1 (1 << 1)
+#define PCH_ENABLE_DBDF (1 << 0)
+
+/* ICH7 GPIOBASE */
+#define GPIO_USE_SEL 0x00
+#define GP_IO_SEL 0x04
+#define GP_LVL 0x0c
+#define GPO_BLINK 0x18
+#define GPI_INV 0x2c
+#define GPIO_USE_SEL2 0x30
+#define GP_IO_SEL2 0x34
+#define GP_LVL2 0x38
+#define GPIO_USE_SEL3 0x40
+#define GP_IO_SEL3 0x44
+#define GP_LVL3 0x48
+#define GP_RST_SEL1 0x60
+#define GP_RST_SEL2 0x64
+#define GP_RST_SEL3 0x68
+
+/* ICH7 PMBASE */
+#define PM1_STS 0x00
+#define WAK_STS (1 << 15)
+#define PCIEXPWAK_STS (1 << 14)
+#define PRBTNOR_STS (1 << 11)
+#define RTC_STS (1 << 10)
+#define PWRBTN_STS (1 << 8)
+#define GBL_STS (1 << 5)
+#define BM_STS (1 << 4)
+#define TMROF_STS (1 << 0)
+#define PM1_EN 0x02
+#define PCIEXPWAK_DIS (1 << 14)
+#define RTC_EN (1 << 10)
+#define PWRBTN_EN (1 << 8)
+#define GBL_EN (1 << 5)
+#define TMROF_EN (1 << 0)
+#define PM1_CNT 0x04
+#define SLP_EN (1 << 13)
+#define SLP_TYP (7 << 10)
+#define SLP_TYP_S0 0
+#define SLP_TYP_S1 1
+#define SLP_TYP_S3 5
+#define SLP_TYP_S4 6
+#define SLP_TYP_S5 7
+#define GBL_RLS (1 << 2)
+#define BM_RLD (1 << 1)
+#define SCI_EN (1 << 0)
+#define PM1_TMR 0x08
+#define PROC_CNT 0x10
+#define LV2 0x14
+#define LV3 0x15
+#define LV4 0x16
+#define PM2_CNT 0x50 // mobile only
+#define GPE0_STS 0x20
+#define PME_B0_STS (1 << 13)
+#define PME_STS (1 << 11)
+#define BATLOW_STS (1 << 10)
+#define PCI_EXP_STS (1 << 9)
+#define RI_STS (1 << 8)
+#define SMB_WAK_STS (1 << 7)
+#define TCOSCI_STS (1 << 6)
+#define SWGPE_STS (1 << 2)
+#define HOT_PLUG_STS (1 << 1)
+#define GPE0_EN 0x28
+#define PME_B0_EN (1 << 13)
+#define PME_EN (1 << 11)
+#define SMI_EN 0x30
+#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic
+#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic
+#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS
+#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al)
+#define MCSMI_EN (1 << 11) // Trap microcontroller range access
+#define BIOS_RLS (1 << 7) // asserts SCI on bit set
+#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set
+#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI#
+#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI#
+#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic
+#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit
+#define EOS (1 << 1) // End of SMI (deassert SMI#)
+#define GBL_SMI_EN (1 << 0) // SMI# generation at all?
+#define SMI_STS 0x34
+#define ALT_GP_SMI_EN 0x38
+#define ALT_GP_SMI_STS 0x3a
+#define GPE_CNTL 0x42
+#define DEVACT_STS 0x44
+#define SS_CNT 0x50
+#define C3_RES 0x54
+
+/*
+ * SPI Opcode Menu setup for SPIBAR lockdown
+ * should support most common flash chips.
+ */
+
+#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */
+#define SPI_OPTYPE_0 0x01 /* Write, no address */
+
+#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */
+#define SPI_OPTYPE_1 0x03 /* Write, address required */
+
+#define SPI_OPMENU_2 0x03 /* READ: Read Data */
+#define SPI_OPTYPE_2 0x02 /* Read, address required */
+
+#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */
+#define SPI_OPTYPE_3 0x00 /* Read, no address */
+
+#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */
+#define SPI_OPTYPE_4 0x03 /* Write, address required */
+
+#define SPI_OPMENU_5 0x9f /* RDID: Read ID */
+#define SPI_OPTYPE_5 0x00 /* Read, no address */
+
+#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */
+#define SPI_OPTYPE_6 0x03 /* Write, address required */
+
+#define SPI_OPMENU_7 0x52 /* BE52: Block Erase 0x52 */
+#define SPI_OPTYPE_7 0x03 /* Write, address required */
+
+#define SPI_OPMENU_UPPER ((SPI_OPMENU_7 << 24) | (SPI_OPMENU_6 << 16) | \
+ (SPI_OPMENU_5 << 8) | SPI_OPMENU_4)
+#define SPI_OPMENU_LOWER ((SPI_OPMENU_3 << 24) | (SPI_OPMENU_2 << 16) | \
+ (SPI_OPMENU_1 << 8) | SPI_OPMENU_0)
+
+#define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \
+ (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \
+ (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \
+ (SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0))
+
+#define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */
+
+#endif /* __ACPI__ */
+#endif /* SOUTHBRIDGE_INTEL_BD82X6X_PCH_H */
diff --git a/src/southbridge/intel/bd82x6x/pci.c b/src/southbridge/intel/bd82x6x/pci.c
new file mode 100644
index 0000000000..845a6fe5ad
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/pci.c
@@ -0,0 +1,145 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "pch.h"
+
+static void pci_init(struct device *dev)
+{
+ u16 reg16;
+ u8 reg8;
+
+ printk(BIOS_DEBUG, "PCI init.\n");
+ /* Enable Bus Master */
+ reg16 = pci_read_config16(dev, PCI_COMMAND);
+ reg16 |= PCI_COMMAND_MASTER;
+ pci_write_config16(dev, PCI_COMMAND, reg16);
+
+ /* This device has no interrupt */
+ pci_write_config8(dev, INTR, 0xff);
+
+ /* disable parity error response and SERR */
+ reg16 = pci_read_config16(dev, BCTRL);
+ reg16 &= ~(1 << 0);
+ reg16 &= ~(1 << 1);
+ pci_write_config16(dev, BCTRL, reg16);
+
+ /* Master Latency Count must be set to 0x04! */
+ reg8 = pci_read_config8(dev, SMLT);
+ reg8 &= 0x07;
+ reg8 |= (0x04 << 3);
+ pci_write_config8(dev, SMLT, reg8);
+
+ /* Will this improve throughput of bus masters? */
+ pci_write_config8(dev, PCI_MIN_GNT, 0x06);
+
+ /* Clear errors in status registers */
+ reg16 = pci_read_config16(dev, PSTS);
+ //reg16 |= 0xf900;
+ pci_write_config16(dev, PSTS, reg16);
+
+ reg16 = pci_read_config16(dev, SECSTS);
+ // reg16 |= 0xf900;
+ pci_write_config16(dev, SECSTS, reg16);
+}
+
+#undef PCI_BRIDGE_UPDATE_COMMAND
+static void ich_pci_dev_enable_resources(struct device *dev)
+{
+ const struct pci_operations *ops;
+ uint16_t command;
+
+ /* Set the subsystem vendor and device id for mainboard devices */
+ ops = ops_pci(dev);
+ if (dev->on_mainboard && ops && ops->set_subsystem) {
+ printk(BIOS_DEBUG, "%s subsystem <- %02x/%02x\n",
+ dev_path(dev),
+ CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID,
+ CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID);
+ ops->set_subsystem(dev,
+ CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID,
+ CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID);
+ }
+
+ command = pci_read_config16(dev, PCI_COMMAND);
+ command |= dev->command;
+#ifdef PCI_BRIDGE_UPDATE_COMMAND
+ /* If we write to PCI_COMMAND, on some systems
+ * this will cause the ROM and APICs not being visible
+ * anymore.
+ */
+ printk(BIOS_DEBUG, "%s cmd <- %02x\n", dev_path(dev), command);
+ pci_write_config16(dev, PCI_COMMAND, command);
+#else
+ printk(BIOS_DEBUG, "%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command);
+#endif
+}
+
+static void ich_pci_bus_enable_resources(struct device *dev)
+{
+ uint16_t ctrl;
+ /* enable IO in command register if there is VGA card
+ * connected with (even it does not claim IO resource)
+ */
+ if (dev->link_list->bridge_ctrl & PCI_BRIDGE_CTL_VGA)
+ dev->command |= PCI_COMMAND_IO;
+ ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL);
+ ctrl |= dev->link_list->bridge_ctrl;
+ ctrl |= (PCI_BRIDGE_CTL_PARITY + PCI_BRIDGE_CTL_SERR); /* error check */
+ printk(BIOS_DEBUG, "%s bridge ctrl <- %04x\n", dev_path(dev), ctrl);
+ pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl);
+
+ /* This is the reason we need our own pci_bus_enable_resources */
+ ich_pci_dev_enable_resources(dev);
+}
+
+static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ /* NOTE: This is not the default position! */
+ if (!vendor || !device) {
+ pci_write_config32(dev, 0x54,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, 0x54,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations pci_ops = {
+ .set_subsystem = set_subsystem,
+};
+
+static struct device_operations device_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = ich_pci_bus_enable_resources,
+ .init = pci_init,
+ .scan_bus = pci_scan_bridge,
+ .ops_pci = &pci_ops,
+};
+
+static const struct pci_driver pch_pci __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x2448,
+};
diff --git a/src/southbridge/intel/bd82x6x/pcie.c b/src/southbridge/intel/bd82x6x/pcie.c
new file mode 100644
index 0000000000..599692d046
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/pcie.c
@@ -0,0 +1,306 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pciexp.h>
+#include <device/pci_ids.h>
+#include "pch.h"
+
+static u16 pcie_port_link_width(int port)
+{
+ u16 link_width;
+
+ link_width = pci_read_config16(
+ dev_find_slot(0, PCI_DEVFN(0x1c, port)), 0x52);
+ link_width >>= 4;
+ link_width &= 0x3f;
+ return link_width;
+}
+
+static void pch_pcie_pm_early(struct device *dev)
+{
+ u16 link_width_p0, link_width_p4;
+ u8 slot_power_limit = 10; /* 10W for x1 */
+ u32 reg32;
+ u8 reg8;
+
+ link_width_p0 = pcie_port_link_width(0);
+ link_width_p4 = pcie_port_link_width(4);
+
+ /* Enable dynamic clock gating where needed */
+ reg8 = pci_read_config8(dev, 0xe1);
+ switch (PCI_FUNC(dev->path.pci.devfn)) {
+ case 0: /* Port 0 */
+ if (link_width_p0 == 4)
+ slot_power_limit = 40; /* 40W for x4 */
+ else if (link_width_p0 == 2)
+ slot_power_limit = 20; /* 20W for x2 */
+ case 4: /* Port 4 */
+ if (link_width_p4 == 4)
+ slot_power_limit = 40; /* 40W for x4 */
+ else if (link_width_p4 == 2)
+ slot_power_limit = 20; /* 20W for x2 */
+ reg8 |= 0x3f;
+ break;
+ case 1: /* Port 1 only if Port 0 is x1 */
+ if (link_width_p0 == 1)
+ reg8 |= 0x3;
+ break;
+ case 2: /* Port 2 only if Port 0 is x1 or x2 */
+ case 3: /* Port 3 only if Port 0 is x1 or x2 */
+ if (link_width_p0 <= 2)
+ reg8 |= 0x3;
+ break;
+ case 5: /* Port 5 only if Port 4 is x1 */
+ if (link_width_p4 == 1)
+ reg8 |= 0x3;
+ break;
+ case 6: /* Port 7 only if Port 4 is x1 or x2 */
+ case 7: /* Port 7 only if Port 4 is x1 or x2 */
+ if (link_width_p4 <= 2)
+ reg8 |= 0x3;
+ break;
+ }
+ pci_write_config8(dev, 0xe1, reg8);
+
+ /* Set 0xE8[0] = 1 */
+ reg32 = pci_read_config32(dev, 0xe8);
+ reg32 |= 1;
+ pci_write_config32(dev, 0xe8, reg32);
+
+ /* Adjust Common Clock exit latency */
+ reg32 = pci_read_config32(dev, 0xd8);
+ reg32 &= ~(1 << 17);
+ reg32 |= (1 << 16) | (1 << 15);
+ reg32 &= ~(1 << 31); /* Disable PME# SCI for native PME handling */
+ pci_write_config32(dev, 0xd8, reg32);
+
+ /* Adjust ASPM L1 exit latency */
+ reg32 = pci_read_config32(dev, 0x4c);
+ reg32 &= ~((1 << 17) | (1 << 16) | (1 << 15));
+ if (RCBA32(0x2320) & (1 << 16)) {
+ /* If RCBA+2320[15]=1 set ASPM L1 to 8-16us */
+ reg32 |= (1 << 17);
+ } else {
+ /* Else set ASPM L1 to 2-4us */
+ reg32 |= (1 << 16);
+ }
+ pci_write_config32(dev, 0x4c, reg32);
+
+ /* Set slot power limit as configured above */
+ reg32 = pci_read_config32(dev, 0x54);
+ reg32 &= ~((1 << 15) | (1 << 16)); /* 16:15 = Slot power scale */
+ reg32 &= ~(0xff << 7); /* 14:7 = Slot power limit */
+ reg32 |= (slot_power_limit << 7);
+ pci_write_config32(dev, 0x54, reg32);
+}
+
+static void pch_pcie_pm_late(struct device *dev)
+{
+ enum aspm_type apmc;
+ u32 reg32;
+
+ /* Set 0x314 = 0x743a361b */
+ pci_mmio_write_config32(dev, 0x314, 0x743a361b);
+
+ /* Set 0x318[31:16] = 0x1414 */
+ reg32 = pci_mmio_read_config32(dev, 0x318);
+ reg32 &= 0x0000ffff;
+ reg32 |= 0x14140000;
+ pci_mmio_write_config32(dev, 0x318, reg32);
+
+ /* Set 0x324[5] = 1 */
+ reg32 = pci_mmio_read_config32(dev, 0x324);
+ reg32 |= (1 << 5);
+ pci_mmio_write_config32(dev, 0x324, reg32);
+
+ /* Set 0x330[7:0] = 0x40 */
+ reg32 = pci_mmio_read_config32(dev, 0x330);
+ reg32 &= ~(0xff);
+ reg32 |= 0x40;
+ pci_mmio_write_config32(dev, 0x330, reg32);
+
+ /* Set 0x33C[24:0] = 0x854c74 */
+ reg32 = pci_mmio_read_config32(dev, 0x33c);
+ reg32 &= 0xff000000;
+ reg32 |= 0x00854c74;
+ pci_mmio_write_config32(dev, 0x33c, reg32);
+
+ /* No IO-APIC, Disable EOI forwarding */
+ reg32 = pci_read_config32(dev, 0xd4);
+ reg32 |= (1 << 1);
+ pci_write_config32(dev, 0xd4, reg32);
+
+ /* Get configured ASPM state */
+ apmc = pci_read_config32(dev, 0x50) & 3;
+
+ /* If both L0s and L1 enabled then set root port 0xE8[1]=1 */
+ if (apmc == PCIE_ASPM_BOTH) {
+ reg32 = pci_read_config32(dev, 0xe8);
+ reg32 |= (1 << 1);
+ pci_write_config32(dev, 0xe8, reg32);
+ }
+}
+
+static void pci_init(struct device *dev)
+{
+ u16 reg16;
+ u32 reg32;
+
+ printk(BIOS_DEBUG, "Initializing PCH PCIe bridge.\n");
+
+ /* Enable Bus Master */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 |= PCI_COMMAND_MASTER;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ /* Set Cache Line Size to 0x10 */
+ // This has no effect but the OS might expect it
+ pci_write_config8(dev, 0x0c, 0x10);
+
+ reg16 = pci_read_config16(dev, 0x3e);
+ reg16 &= ~(1 << 0); /* disable parity error response */
+ // reg16 &= ~(1 << 1); /* disable SERR */
+ reg16 |= (1 << 2); /* ISA enable */
+ pci_write_config16(dev, 0x3e, reg16);
+
+#ifdef EVEN_MORE_DEBUG
+ reg32 = pci_read_config32(dev, 0x20);
+ printk(BIOS_SPEW, " MBL = 0x%08x\n", reg32);
+ reg32 = pci_read_config32(dev, 0x24);
+ printk(BIOS_SPEW, " PMBL = 0x%08x\n", reg32);
+ reg32 = pci_read_config32(dev, 0x28);
+ printk(BIOS_SPEW, " PMBU32 = 0x%08x\n", reg32);
+ reg32 = pci_read_config32(dev, 0x2c);
+ printk(BIOS_SPEW, " PMLU32 = 0x%08x\n", reg32);
+#endif
+
+ /* Clear errors in status registers */
+ reg16 = pci_read_config16(dev, 0x06);
+ //reg16 |= 0xf900;
+ pci_write_config16(dev, 0x06, reg16);
+
+ reg16 = pci_read_config16(dev, 0x1e);
+ //reg16 |= 0xf900;
+ pci_write_config16(dev, 0x1e, reg16);
+
+ /* Power Management init after enumeration */
+ pch_pcie_pm_late(dev);
+}
+
+static void pch_pcie_enable(device_t dev)
+{
+ /* Power Management init before enumeration */
+ pch_pcie_pm_early(dev);
+}
+
+static void pcie_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ /* NOTE: This is not the default position! */
+ if (!vendor || !device) {
+ pci_write_config32(dev, 0x94,
+ pci_read_config32(dev, 0));
+ } else {
+ pci_write_config32(dev, 0x94,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations pci_ops = {
+ .set_subsystem = pcie_set_subsystem,
+};
+
+static struct device_operations device_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_bus_enable_resources,
+ .init = pci_init,
+ .enable = pch_pcie_enable,
+ .scan_bus = pciexp_scan_bridge,
+ .ops_pci = &pci_ops,
+};
+
+static const struct pci_driver pch_pcie_port1 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c10, /* D28:F0 */
+};
+
+static const struct pci_driver pch_pcie_port1_a __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1e10, /* D28:F0 */
+};
+
+static const struct pci_driver pch_pcie_port2 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c12, /* D28:F1 */
+};
+
+static const struct pci_driver pch_pcie_port3 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c14, /* D28:F2 */
+};
+
+static const struct pci_driver pch_pcie_port3_a __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1e14, /* D28:F2 */
+};
+
+static const struct pci_driver pch_pcie_port4 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c16, /* D28:F3 */
+};
+
+static const struct pci_driver pch_pcie_port4_a __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1e16, /* D28:F3 */
+};
+
+static const struct pci_driver pch_pcie_port5 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c18, /* D28:F4 */
+};
+
+static const struct pci_driver pch_pcie_port6 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c1a, /* D28:F5 */
+};
+
+static const struct pci_driver pch_pcie_port7 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c1c, /* D28:F6 */
+};
+
+static const struct pci_driver pch_pcie_port8 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c1e, /* D28:F7 */
+};
diff --git a/src/southbridge/intel/bd82x6x/reset.c b/src/southbridge/intel/bd82x6x/reset.c
new file mode 100644
index 0000000000..29b69ff43a
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/reset.c
@@ -0,0 +1,41 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <reset.h>
+
+void soft_reset(void)
+{
+ outb(0x04, 0xcf9);
+}
+
+#if 0
+void hard_reset(void)
+{
+ /* Try rebooting through port 0xcf9. */
+ outb((1 << 2) | (1 << 1), 0xcf9);
+}
+#endif
+
+void hard_reset(void)
+{
+ outb(0x02, 0xcf9);
+ outb(0x06, 0xcf9);
+}
diff --git a/src/southbridge/intel/bd82x6x/sata.c b/src/southbridge/intel/bd82x6x/sata.c
new file mode 100644
index 0000000000..057b8825b0
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/sata.c
@@ -0,0 +1,246 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "pch.h"
+
+typedef struct southbridge_intel_bd82x6x_config config_t;
+
+static void sata_init(struct device *dev)
+{
+ u32 reg32;
+ u16 reg16;
+ /* Get the chip configuration */
+ config_t *config = dev->chip_info;
+
+ printk(BIOS_DEBUG, "pch_sata: initializing...\n");
+
+ if (config == NULL) {
+ printk(BIOS_ERR, "pch_sata: error: device not in devicetree.cb!\n");
+ return;
+ }
+
+ /* SATA configuration */
+
+ /* Enable BARs */
+ pci_write_config16(dev, PCI_COMMAND, 0x0007);
+
+ if (config->ide_legacy_combined) {
+ printk(BIOS_DEBUG, "SATA controller in combined mode.\n");
+ /* Combine IDE - SATA configuration */
+ pci_write_config16(dev, 0x90, 0x0000);
+
+ /* No AHCI: clear AHCI base */
+ pci_write_config32(dev, 0x24, 0x00000000);
+ /* And without AHCI BAR no memory decoding */
+ reg16 = pci_read_config16(dev, PCI_COMMAND);
+ reg16 &= ~PCI_COMMAND_MEMORY;
+ pci_write_config16(dev, PCI_COMMAND, reg16);
+
+ pci_write_config8(dev, 0x09, 0x80);
+
+ /* Set timings */
+ pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+ IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
+ pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+ IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
+ IDE_PPE0 | IDE_IE0 | IDE_TIME0);
+
+ /* Sync DMA */
+ pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
+ pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
+
+ /* Set IDE I/O Configuration */
+ reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
+ pci_write_config32(dev, IDE_CONFIG, reg32);
+
+ /* Port enable */
+ reg16 = pci_read_config16(dev, 0x92);
+ reg16 &= ~0x3f;
+ reg16 |= config->sata_port_map;
+ pci_write_config16(dev, 0x92, reg16);
+
+ /* SATA Initialization register */
+ pci_write_config32(dev, 0x94,
+ ((config->sata_port_map ^ 0x3f) << 24) | 0x183);
+ } else if(config->sata_ahci) {
+ u32 abar;
+
+ printk(BIOS_DEBUG, "SATA controller in AHCI mode.\n");
+ /* Set Sata Controller Mode. */
+ pci_write_config16(dev, 0x90, 0x0060 |
+ ((config->sata_port_map ^ 0x3f) << 8));
+
+ /* Set Interrupt Line */
+ /* Interrupt Pin is set by D31IP.PIP */
+ pci_write_config8(dev, INTR_LN, 0x0a);
+
+ /* Set timings */
+ pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+ IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
+ IDE_PPE0 | IDE_IE0 | IDE_TIME0);
+ pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+ IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
+
+ /* Sync DMA */
+ pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
+ pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
+
+ /* Set IDE I/O Configuration */
+ reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
+ pci_write_config32(dev, IDE_CONFIG, reg32);
+
+ /* for AHCI, Port Enable is managed in memory mapped space */
+ reg16 = pci_read_config16(dev, 0x92);
+ reg16 &= ~0x3f; /* 6 ports SKU + ORM */
+ reg16 |= 0x8000 | config->sata_port_map;
+ pci_write_config16(dev, 0x92, reg16);
+
+ /* SATA Initialization register */
+ pci_write_config32(dev, 0x94,
+ ((config->sata_port_map ^ 0x3f) << 24) | 0x183);
+
+ /* Initialize AHCI memory-mapped space */
+ abar = pci_read_config32(dev, PCI_BASE_ADDRESS_5);
+ printk(BIOS_DEBUG, "ABAR: %08X\n", abar);
+ /* CAP (HBA Capabilities) : enable power management */
+ reg32 = read32(abar + 0x00);
+ reg32 |= 0x0c006000; // set PSC+SSC+SALP+SSS
+ reg32 &= ~0x00020060; // clear SXS+EMS+PMS
+ write32(abar + 0x00, reg32);
+ /* PI (Ports implemented) */
+ write32(abar + 0x0c, config->sata_port_map);
+ (void) read32(abar + 0x0c); /* Read back 1 */
+ (void) read32(abar + 0x0c); /* Read back 2 */
+ /* CAP2 (HBA Capabilities Extended)*/
+ reg32 = read32(abar + 0x24);
+ reg32 &= ~0x00000002;
+ write32(abar + 0x24, reg32);
+ /* VSP (Vendor Specific Register */
+ reg32 = read32(abar + 0xa0);
+ reg32 &= ~0x00000005;
+ write32(abar + 0xa0, reg32);
+ } else {
+ printk(BIOS_DEBUG, "SATA controller in plain mode.\n");
+ /* Set Sata Controller Mode. No Mapping(?) */
+ pci_write_config16(dev, 0x90, 0x0000);
+
+ /* No AHCI: clear AHCI base */
+ pci_write_config32(dev, 0x24, 0x00000000);
+
+ /* And without AHCI BAR no memory decoding */
+ reg16 = pci_read_config16(dev, PCI_COMMAND);
+ reg16 &= ~PCI_COMMAND_MEMORY;
+ pci_write_config16(dev, PCI_COMMAND, reg16);
+
+ /* Native mode capable on both primary and secondary (0xa)
+ * or'ed with enabled (0x50) = 0xf
+ */
+ pci_write_config8(dev, 0x09, 0x8f);
+
+ /* Set Interrupt Line */
+ /* Interrupt Pin is set by D31IP.PIP */
+ pci_write_config8(dev, INTR_LN, 0xff);
+
+ /* Set timings */
+ pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+ IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
+ IDE_PPE0 | IDE_IE0 | IDE_TIME0);
+ pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+ IDE_SITRE | IDE_ISP_3_CLOCKS |
+ IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
+
+ /* Sync DMA */
+ pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
+ pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
+
+ /* Set IDE I/O Configuration */
+ reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
+ pci_write_config32(dev, IDE_CONFIG, reg32);
+
+ /* Port enable */
+ reg16 = pci_read_config16(dev, 0x92);
+ reg16 &= ~0x3f;
+ reg16 |= config->sata_port_map;
+ pci_write_config16(dev, 0x92, reg16);
+
+ /* SATA Initialization register */
+ pci_write_config32(dev, 0x94,
+ ((config->sata_port_map ^ 0x3f) << 24) | 0x183);
+ }
+}
+
+static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations sata_pci_ops = {
+ .set_subsystem = sata_set_subsystem,
+};
+
+static struct device_operations sata_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sata_init,
+ .scan_bus = 0,
+ .ops_pci = &sata_pci_ops,
+};
+
+/* Non-AHCI and Non-RAID Mode */
+static const struct pci_driver pch_sata_normal_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c00,
+};
+static const struct pci_driver pch_sata_mobile_normal_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c01,
+};
+
+/* AHCI Mode */
+static const struct pci_driver pch_sata_ahci_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c02,
+};
+static const struct pci_driver pch_sata_mobile_ahci_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c03,
+};
+static const struct pci_driver pch_sata_mobile_ahci_driver_a __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1e03,
+};
+
diff --git a/src/southbridge/intel/bd82x6x/smbus.c b/src/southbridge/intel/bd82x6x/smbus.c
new file mode 100644
index 0000000000..baa3cfbc45
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/smbus.c
@@ -0,0 +1,113 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/path.h>
+#include <device/smbus.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include "pch.h"
+#include "smbus.h"
+
+static void pch_smbus_init(device_t dev)
+{
+ struct resource *res;
+ u16 reg16;
+
+ /* Enable clock gating */
+ reg16 = pci_read_config32(dev, 0x80);
+ reg16 &= ~((1 << 8)|(1 << 10)|(1 << 12)|(1 << 14));
+ pci_write_config32(dev, 0x80, reg16);
+
+ /* Set Receive Slave Address */
+ res = find_resource(dev, PCI_BASE_ADDRESS_4);
+ if (res)
+ outb(SMBUS_SLAVE_ADDR, res->base + SMB_RCV_SLVA);
+}
+
+static int lsmbus_read_byte(device_t dev, u8 address)
+{
+ u16 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+ res = find_resource(pbus->dev, 0x20);
+
+ return do_smbus_read_byte(res->base, device, address);
+}
+
+static struct smbus_bus_operations lops_smbus_bus = {
+ .read_byte = lsmbus_read_byte,
+};
+
+static void smbus_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations smbus_pci_ops = {
+ .set_subsystem = smbus_set_subsystem,
+};
+
+static void smbus_read_resources(device_t dev)
+{
+ struct resource *res = new_resource(dev, PCI_BASE_ADDRESS_4);
+ res->base = SMBUS_IO_BASE;
+ res->size = 32;
+ res->limit = res->base + res->size - 1;
+ res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_RESERVE |
+ IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+
+ /* Also add MMIO resource */
+ res = pci_get_resource(dev, PCI_BASE_ADDRESS_0);
+}
+
+static struct device_operations smbus_ops = {
+ .read_resources = smbus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .scan_bus = scan_static_bus,
+ .init = pch_smbus_init,
+ .ops_smbus_bus = &lops_smbus_bus,
+ .ops_pci = &smbus_pci_ops,
+};
+
+static const struct pci_driver pch_smbus __pci_driver = {
+ .ops = &smbus_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c22,
+};
+
+static const struct pci_driver pch_smbus_a __pci_driver = {
+ .ops = &smbus_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1e22,
+};
diff --git a/src/southbridge/intel/bd82x6x/smbus.h b/src/southbridge/intel/bd82x6x/smbus.h
new file mode 100644
index 0000000000..f2f7f60d82
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/smbus.h
@@ -0,0 +1,100 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
+ * Copyright (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/smbus_def.h>
+#include "pch.h"
+
+static void smbus_delay(void)
+{
+ inb(0x80);
+}
+
+static int smbus_wait_until_ready(u16 smbus_base)
+{
+ unsigned loops = SMBUS_TIMEOUT;
+ unsigned char byte;
+ do {
+ smbus_delay();
+ if (--loops == 0)
+ break;
+ byte = inb(smbus_base + SMBHSTSTAT);
+ } while (byte & 1);
+ return loops ? 0 : -1;
+}
+
+static int smbus_wait_until_done(u16 smbus_base)
+{
+ unsigned loops = SMBUS_TIMEOUT;
+ unsigned char byte;
+ do {
+ smbus_delay();
+ if (--loops == 0)
+ break;
+ byte = inb(smbus_base + SMBHSTSTAT);
+ } while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0);
+ return loops ? 0 : -1;
+}
+
+static int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address)
+{
+ unsigned char global_status_register;
+ unsigned char byte;
+
+ if (smbus_wait_until_ready(smbus_base) < 0) {
+ return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+ }
+ /* Setup transaction */
+ /* Disable interrupts */
+ outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
+ /* Set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD);
+ /* Set the command/address... */
+ outb(address & 0xff, smbus_base + SMBHSTCMD);
+ /* Set up for a byte data read */
+ outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
+ (smbus_base + SMBHSTCTL));
+ /* Clear any lingering errors, so the transaction will run */
+ outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
+
+ /* Clear the data byte... */
+ outb(0, smbus_base + SMBHSTDAT0);
+
+ /* Start the command */
+ outb((inb(smbus_base + SMBHSTCTL) | 0x40),
+ smbus_base + SMBHSTCTL);
+
+ /* Poll for transaction completion */
+ if (smbus_wait_until_done(smbus_base) < 0) {
+ return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+ }
+
+ global_status_register = inb(smbus_base + SMBHSTSTAT);
+
+ /* Ignore the "In Use" status... */
+ global_status_register &= ~(3 << 5);
+
+ /* Read results of transaction */
+ byte = inb(smbus_base + SMBHSTDAT0);
+ if (global_status_register != (1 << 1)) {
+ return SMBUS_ERROR;
+ }
+ return byte;
+}
+
diff --git a/src/southbridge/intel/bd82x6x/smi.c b/src/southbridge/intel/bd82x6x/smi.c
new file mode 100644
index 0000000000..da1084005f
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/smi.c
@@ -0,0 +1,403 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <cpu/cpu.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/smm.h>
+#include <string.h>
+#include "pch.h"
+
+#if CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE || CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE
+#include "northbridge/intel/sandybridge/sandybridge.h"
+#endif
+
+extern unsigned char _binary_smm_start;
+extern unsigned char _binary_smm_size;
+
+/* While we read PMBASE dynamically in case it changed, let's
+ * initialize it with a sane value
+ */
+static u16 pmbase = DEFAULT_PMBASE;
+
+/**
+ * @brief read and clear PM1_STS
+ * @return PM1_STS register
+ */
+static u16 reset_pm1_status(void)
+{
+ u16 reg16;
+
+ reg16 = inw(pmbase + PM1_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outw(reg16, pmbase + PM1_STS);
+
+ return reg16;
+}
+
+static void dump_pm1_status(u16 pm1_sts)
+{
+ printk(BIOS_DEBUG, "PM1_STS: ");
+ if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK ");
+ if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK ");
+ if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR ");
+ if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC ");
+ if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN ");
+ if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL ");
+ if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM ");
+ if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF ");
+ printk(BIOS_DEBUG, "\n");
+}
+
+/**
+ * @brief read and clear SMI_STS
+ * @return SMI_STS register
+ */
+static u32 reset_smi_status(void)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + SMI_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32, pmbase + SMI_STS);
+
+ return reg32;
+}
+
+static void dump_smi_status(u32 smi_sts)
+{
+ printk(BIOS_DEBUG, "SMI_STS: ");
+ if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
+ if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI ");
+ if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
+ if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
+ if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
+ if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
+ if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
+ if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
+ if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
+ if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
+ if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
+ if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
+ if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
+ if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 ");
+ if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 ");
+ if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
+ if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM ");
+ if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI ");
+ if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB ");
+ if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS ");
+ printk(BIOS_DEBUG, "\n");
+}
+
+
+/**
+ * @brief read and clear GPE0_STS
+ * @return GPE0_STS register
+ */
+static u32 reset_gpe0_status(void)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + GPE0_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32, pmbase + GPE0_STS);
+
+ return reg32;
+}
+
+static void dump_gpe0_status(u32 gpe0_sts)
+{
+ int i;
+ printk(BIOS_DEBUG, "GPE0_STS: ");
+ for (i=31; i<= 16; i--) {
+ if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
+ }
+ if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
+ if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
+ if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
+ if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
+ if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
+ if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP ");
+ if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
+ if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
+ if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
+ if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 ");
+ if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
+ if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
+ if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG ");
+ if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM ");
+ printk(BIOS_DEBUG, "\n");
+}
+
+
+/**
+ * @brief read and clear ALT_GP_SMI_STS
+ * @return ALT_GP_SMI_STS register
+ */
+static u16 reset_alt_gp_smi_status(void)
+{
+ u16 reg16;
+
+ reg16 = inl(pmbase + ALT_GP_SMI_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg16, pmbase + ALT_GP_SMI_STS);
+
+ return reg16;
+}
+
+static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts)
+{
+ int i;
+ printk(BIOS_DEBUG, "ALT_GP_SMI_STS: ");
+ for (i=15; i<= 0; i--) {
+ if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", (i-16));
+ }
+ printk(BIOS_DEBUG, "\n");
+}
+
+
+
+/**
+ * @brief read and clear TCOx_STS
+ * @return TCOx_STS registers
+ */
+static u32 reset_tco_status(void)
+{
+ u32 tcobase = pmbase + 0x60;
+ u32 reg32;
+
+ reg32 = inl(tcobase + 0x04);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS
+ if (reg32 & (1 << 18))
+ outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
+
+ return reg32;
+}
+
+
+static void dump_tco_status(u32 tco_sts)
+{
+ printk(BIOS_DEBUG, "TCO_STS: ");
+ if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
+ if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
+ if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
+ if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
+ if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
+ if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
+ if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI ");
+ if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR ");
+ if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY ");
+ if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT ");
+ if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT ");
+ if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO ");
+ if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI ");
+ printk(BIOS_DEBUG, "\n");
+}
+
+
+
+/**
+ * @brief Set the EOS bit
+ */
+static void smi_set_eos(void)
+{
+ u8 reg8;
+
+ reg8 = inb(pmbase + SMI_EN);
+ reg8 |= EOS;
+ outb(reg8, pmbase + SMI_EN);
+}
+
+extern uint8_t smm_relocation_start, smm_relocation_end;
+
+static void smm_relocate(void)
+{
+ u32 smi_en;
+ u16 pm1_en;
+ u32 gpe0_en;
+
+ printk(BIOS_DEBUG, "Initializing SMM handler...");
+
+ pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)),
+ PMBASE) & 0xff80;
+
+ printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
+
+ smi_en = inl(pmbase + SMI_EN);
+ if (smi_en & APMC_EN) {
+ printk(BIOS_INFO, "SMI# handler already enabled?\n");
+ return;
+ }
+
+ /* copy the SMM relocation code */
+ memcpy((void *)0x38000, &smm_relocation_start,
+ &smm_relocation_end - &smm_relocation_start);
+
+ printk(BIOS_DEBUG, "\n");
+ dump_smi_status(reset_smi_status());
+ dump_pm1_status(reset_pm1_status());
+ dump_gpe0_status(reset_gpe0_status());
+ dump_alt_gp_smi_status(reset_alt_gp_smi_status());
+ dump_tco_status(reset_tco_status());
+
+ /* Disable GPE0 PME_B0 */
+ gpe0_en = inl(pmbase + GPE0_EN);
+ gpe0_en &= ~PME_B0_EN;
+ outl(gpe0_en, pmbase + GPE0_EN);
+
+ /* Enable SMI generation:
+ * - on TCO events
+ * - on APMC writes (io 0xb2)
+ * - on writes to SLP_EN (sleep states)
+ * - on writes to GBL_RLS (bios commands)
+ * No SMIs:
+ * - on microcontroller writes (io 0x62/0x66)
+ */
+
+ smi_en = 0; /* reset SMI enables */
+
+#if 0
+ smi_en |= LEGACY_USB2_EN | LEGACY_USB_EN;
+#endif
+ smi_en |= TCO_EN;
+ smi_en |= APMC_EN;
+#if DEBUG_PERIODIC_SMIS
+ /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using
+ * periodic SMIs.
+ */
+ smi_en |= PERIODIC_EN;
+#endif
+ smi_en |= SLP_SMI_EN;
+#if 0
+ smi_en |= BIOS_EN;
+#endif
+
+ /* The following need to be on for SMIs to happen */
+ smi_en |= EOS | GBL_SMI_EN;
+
+ outl(smi_en, pmbase + SMI_EN);
+
+ pm1_en = 0;
+ pm1_en |= PWRBTN_EN;
+ pm1_en |= GBL_EN;
+ outw(pm1_en, pmbase + PM1_EN);
+
+ /**
+ * There are several methods of raising a controlled SMI# via
+ * software, among them:
+ * - Writes to io 0xb2 (APMC)
+ * - Writes to the Local Apic ICR with Delivery mode SMI.
+ *
+ * Using the local apic is a bit more tricky. According to
+ * AMD Family 11 Processor BKDG no destination shorthand must be
+ * used.
+ * The whole SMM initialization is quite a bit hardware specific, so
+ * I'm not too worried about the better of the methods at the moment
+ */
+
+ /* raise an SMI interrupt */
+ printk(BIOS_SPEW, " ... raise SMI#\n");
+ outb(0x00, 0xb2);
+}
+
+static int smm_handler_copied = 0;
+
+static void smm_install(void)
+{
+ device_t dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+ u32 smm_base = 0xa0000;
+ struct ied_header ied = {
+ .signature = "INTEL RSVD",
+ .size = IED_SIZE,
+ .reserved = {0},
+ };
+
+ /* The first CPU running this gets to copy the SMM handler. But not all
+ * of them.
+ */
+ if (smm_handler_copied)
+ return;
+ smm_handler_copied = 1;
+
+ /* enable the SMM memory window */
+ pci_write_config8(dev, SMRAM, D_OPEN | G_SMRAME | C_BASE_SEG);
+
+#if CONFIG_SMM_TSEG
+ smm_base = pci_read_config32(dev, TSEG) & ~1;
+#endif
+
+ /* copy the real SMM handler */
+ printk(BIOS_DEBUG, "Installing SMM handler to 0x%08x\n", smm_base);
+ memcpy((void *)smm_base, &_binary_smm_start, (size_t)&_binary_smm_size);
+
+ /* copy the IED header into place */
+ if (CONFIG_SMM_TSEG_SIZE > IED_SIZE) {
+ /* Top of TSEG region */
+ smm_base += CONFIG_SMM_TSEG_SIZE - IED_SIZE;
+ printk(BIOS_DEBUG, "Installing IED header to 0x%08x\n",
+ smm_base);
+ memcpy((void *)smm_base, &ied, sizeof(ied));
+ }
+ wbinvd();
+
+ /* close the SMM memory window and enable normal SMM */
+ pci_write_config8(dev, SMRAM, G_SMRAME | C_BASE_SEG);
+}
+
+void smm_init(void)
+{
+ /* Put SMM code to 0xa0000 */
+ smm_install();
+
+ /* Put relocation code to 0x38000 and relocate SMBASE */
+ smm_relocate();
+
+ /* We're done. Make sure SMIs can happen! */
+ smi_set_eos();
+}
+
+void smm_lock(void)
+{
+ /* LOCK the SMM memory window and enable normal SMM.
+ * After running this function, only a full reset can
+ * make the SMM registers writable again.
+ */
+ printk(BIOS_DEBUG, "Locking SMM.\n");
+ pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
+ D_LCK | G_SMRAME | C_BASE_SEG);
+}
+
+void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
+{
+ /* The GDT or coreboot table is going to live here. But a long time
+ * after we relocated the GNVS, so this is not troublesome.
+ */
+ *(u32 *)0x500 = (u32)gnvs;
+ *(u32 *)0x504 = (u32)tcg;
+ *(u32 *)0x508 = (u32)smi1;
+ outb(0xea, 0xb2);
+}
diff --git a/src/southbridge/intel/bd82x6x/smihandler.c b/src/southbridge/intel/bd82x6x/smihandler.c
new file mode 100644
index 0000000000..e311d95e01
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/smihandler.c
@@ -0,0 +1,709 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <arch/hlt.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/smm.h>
+#include <device/pci_def.h>
+#include <cpu/x86/smm.h>
+#include "pch.h"
+
+#include "nvs.h"
+
+/* While we read PMBASE dynamically in case it changed, let's
+ * initialize it with a sane value
+ */
+u16 pmbase = DEFAULT_PMBASE;
+u8 smm_initialized = 0;
+
+/* GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located
+ * by coreboot.
+ */
+global_nvs_t *gnvs = (global_nvs_t *)0x0;
+void *tcg = (void *)0x0;
+void *smi1 = (void *)0x0;
+
+#if CONFIG_SMM_TSEG
+static u32 tseg_base = 0;
+static inline void tseg_fixup(void **ptr)
+{
+ /* Adjust pointer with TSEG base */
+ if (*ptr)
+ *ptr = (void *)(((u8*)*ptr) + tseg_base);
+}
+#else
+#define tseg_fixup(x) do {} while(0)
+#endif
+
+/**
+ * @brief read and clear PM1_STS
+ * @return PM1_STS register
+ */
+static u16 reset_pm1_status(void)
+{
+ u16 reg16;
+
+ reg16 = inw(pmbase + PM1_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outw(reg16, pmbase + PM1_STS);
+
+ return reg16;
+}
+
+static void dump_pm1_status(u16 pm1_sts)
+{
+ printk(BIOS_SPEW, "PM1_STS: ");
+ if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK ");
+ if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK ");
+ if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR ");
+ if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC ");
+ if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN ");
+ if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL ");
+ if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM ");
+ if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF ");
+ printk(BIOS_SPEW, "\n");
+ int reg16 = inw(pmbase + PM1_EN);
+ printk(BIOS_SPEW, "PM1_EN: %x\n", reg16);
+}
+
+/**
+ * @brief read and clear SMI_STS
+ * @return SMI_STS register
+ */
+static u32 reset_smi_status(void)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + SMI_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32, pmbase + SMI_STS);
+
+ return reg32;
+}
+
+static void dump_smi_status(u32 smi_sts)
+{
+ printk(BIOS_DEBUG, "SMI_STS: ");
+ if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
+ if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
+ if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
+ if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
+ if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
+ if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
+ if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
+ if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
+ if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
+ if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
+ if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
+ if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
+ if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 ");
+ if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 ");
+ if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
+ if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM ");
+ if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI ");
+ if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB ");
+ if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS ");
+ printk(BIOS_DEBUG, "\n");
+}
+
+
+/**
+ * @brief read and clear GPE0_STS
+ * @return GPE0_STS register
+ */
+static u32 reset_gpe0_status(void)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + GPE0_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32, pmbase + GPE0_STS);
+
+ return reg32;
+}
+
+static void dump_gpe0_status(u32 gpe0_sts)
+{
+ int i;
+ printk(BIOS_DEBUG, "GPE0_STS: ");
+ for (i=31; i<= 16; i--) {
+ if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
+ }
+ if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
+ if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
+ if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
+ if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
+ if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "BATLOW ");
+ if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP ");
+ if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
+ if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
+ if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
+ if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 ");
+ if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
+ if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
+ if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "SWGPE ");
+ if (gpe0_sts & (1 << 1)) printk(BIOS_DEBUG, "HOTPLUG ");
+ if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM ");
+ printk(BIOS_DEBUG, "\n");
+}
+
+
+/**
+ * @brief read and clear TCOx_STS
+ * @return TCOx_STS registers
+ */
+static u32 reset_tco_status(void)
+{
+ u32 tcobase = pmbase + 0x60;
+ u32 reg32;
+
+ reg32 = inl(tcobase + 0x04);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS
+ if (reg32 & (1 << 18))
+ outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
+
+ return reg32;
+}
+
+
+static void dump_tco_status(u32 tco_sts)
+{
+ printk(BIOS_DEBUG, "TCO_STS: ");
+ if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
+ if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
+ if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
+ if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
+ if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
+ if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
+ if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI ");
+ if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR ");
+ if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY ");
+ if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT ");
+ if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT ");
+ if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO ");
+ if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI ");
+ printk(BIOS_DEBUG, "\n");
+}
+
+/* We are using PCIe accesses for now
+ * 1. the chipset can do it
+ * 2. we don't need to worry about how we leave 0xcf8/0xcfc behind
+ */
+#include <northbridge/intel/sandybridge/sandybridge.h>
+#include <northbridge/intel/sandybridge/pcie_config.c>
+
+int southbridge_io_trap_handler(int smif)
+{
+ switch (smif) {
+ case 0x32:
+ printk(BIOS_DEBUG, "OS Init\n");
+ /* gnvs->smif:
+ * On success, the IO Trap Handler returns 0
+ * On failure, the IO Trap Handler returns a value != 0
+ */
+ gnvs->smif = 0;
+ return 1; /* IO trap handled */
+ }
+
+ /* Not handled */
+ return 0;
+}
+
+/**
+ * @brief Set the EOS bit
+ */
+void southbridge_smi_set_eos(void)
+{
+ u8 reg8;
+
+ reg8 = inb(pmbase + SMI_EN);
+ reg8 |= EOS;
+ outb(reg8, pmbase + SMI_EN);
+}
+
+static void busmaster_disable_on_bus(int bus)
+{
+ int slot, func;
+ unsigned int val;
+ unsigned char hdr;
+
+ for (slot = 0; slot < 0x20; slot++) {
+ for (func = 0; func < 8; func++) {
+ u32 reg32;
+ device_t dev = PCI_DEV(bus, slot, func);
+
+ val = pci_read_config32(dev, PCI_VENDOR_ID);
+
+ if (val == 0xffffffff || val == 0x00000000 ||
+ val == 0x0000ffff || val == 0xffff0000)
+ continue;
+
+ /* Disable Bus Mastering for this one device */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 &= ~PCI_COMMAND_MASTER;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ /* If this is a bridge, then follow it. */
+ hdr = pci_read_config8(dev, PCI_HEADER_TYPE);
+ hdr &= 0x7f;
+ if (hdr == PCI_HEADER_TYPE_BRIDGE ||
+ hdr == PCI_HEADER_TYPE_CARDBUS) {
+ unsigned int buses;
+ buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
+ busmaster_disable_on_bus((buses >> 8) & 0xff);
+ }
+ }
+ }
+}
+
+/*
+ * Drive GPIO 60 low to gate memory reset in S3.
+ *
+ * Intel reference designs all use GPIO 60 but it is
+ * not a requirement and boards could use a different pin.
+ */
+static void southbridge_gate_memory_reset(void)
+{
+ u32 reg32;
+ u16 gpiobase;
+
+ gpiobase = pcie_read_config16(PCI_DEV(0, 0x1f, 0), GPIOBASE) & 0xfffc;
+ if (!gpiobase)
+ return;
+
+ /* Make sure it is set as GPIO */
+ reg32 = inl(gpiobase + GPIO_USE_SEL2);
+ if (!(reg32 & (1 << 28))) {
+ reg32 |= (1 << 28);
+ outl(reg32, gpiobase + GPIO_USE_SEL2);
+ }
+
+ /* Make sure it is set as output */
+ reg32 = inl(gpiobase + GP_IO_SEL2);
+ if (reg32 & (1 << 28)) {
+ reg32 &= ~(1 << 28);
+ outl(reg32, gpiobase + GP_IO_SEL2);
+ }
+
+ /* Drive the output low */
+ reg32 = inl(gpiobase + GP_LVL2);
+ reg32 &= ~(1 << 28);
+ outl(reg32, gpiobase + GP_LVL2);
+}
+
+static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u8 reg8;
+ u32 reg32;
+ u8 slp_typ;
+ /* FIXME: the power state on boot should be read from
+ * CMOS or even better from GNVS. Right now it's hard
+ * coded at compile time.
+ */
+ u8 s5pwr = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+ void (*mainboard_sleep)(u8 slp_typ) = mainboard_smi_sleep;
+
+ /* First, disable further SMIs */
+ reg8 = inb(pmbase + SMI_EN);
+ reg8 &= ~SLP_SMI_EN;
+ outb(reg8, pmbase + SMI_EN);
+
+ /* Figure out SLP_TYP */
+ reg32 = inl(pmbase + PM1_CNT);
+ printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32);
+ slp_typ = (reg32 >> 10) & 7;
+
+ /* Do any mainboard sleep handling */
+ tseg_fixup((void **)&mainboard_sleep);
+ if (mainboard_sleep)
+ mainboard_sleep(slp_typ);
+
+ /* Next, do the deed.
+ */
+
+ switch (slp_typ) {
+ case 0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break;
+ case 1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break;
+ case 5:
+ printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n");
+
+ /* Gate memory reset */
+ southbridge_gate_memory_reset();
+
+ /* Invalidate the cache before going to S3 */
+ wbinvd();
+ break;
+ case 6: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break;
+ case 7:
+ printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n");
+
+ outl(0, pmbase + GPE0_EN);
+
+ /* Should we keep the power state after a power loss?
+ * In case the setting is "ON" or "OFF" we don't have
+ * to do anything. But if it's "KEEP" we have to switch
+ * to "OFF" before entering S5.
+ */
+ if (s5pwr == MAINBOARD_POWER_KEEP) {
+ reg8 = pcie_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3);
+ reg8 |= 1;
+ pcie_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8);
+ }
+
+ /* also iterates over all bridges on bus 0 */
+ busmaster_disable_on_bus(0);
+ break;
+ default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break;
+ }
+
+ /* Write back to the SLP register to cause the originally intended
+ * event again. We need to set BIT13 (SLP_EN) though to make the
+ * sleep happen.
+ */
+ outl(reg32 | SLP_EN, pmbase + PM1_CNT);
+
+ /* Make sure to stop executing code here for S3/S4/S5 */
+ if (slp_typ > 1)
+ hlt();
+
+ /* In most sleep states, the code flow of this function ends at
+ * the line above. However, if we entered sleep state S1 and wake
+ * up again, we will continue to execute code in this function.
+ */
+ reg32 = inl(pmbase + PM1_CNT);
+ if (reg32 & SCI_EN) {
+ /* The OS is not an ACPI OS, so we set the state to S0 */
+ reg32 &= ~(SLP_EN | SLP_TYP);
+ outl(reg32, pmbase + PM1_CNT);
+ }
+}
+
+static void southbridge_smi_apmc(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u32 pmctrl;
+ u8 reg8;
+ void (*mainboard_apmc)(u8 apmc) = mainboard_smi_apmc;
+
+ /* Emulate B2 register as the FADT / Linux expects it */
+
+ reg8 = inb(APM_CNT);
+ switch (reg8) {
+ case APM_CNT_CST_CONTROL:
+ /* Calling this function seems to cause
+ * some kind of race condition in Linux
+ * and causes a kernel oops
+ */
+ printk(BIOS_DEBUG, "C-state control\n");
+ break;
+ case APM_CNT_PST_CONTROL:
+ /* Calling this function seems to cause
+ * some kind of race condition in Linux
+ * and causes a kernel oops
+ */
+ printk(BIOS_DEBUG, "P-state control\n");
+ break;
+ case APM_CNT_ACPI_DISABLE:
+ pmctrl = inl(pmbase + PM1_CNT);
+ pmctrl &= ~SCI_EN;
+ outl(pmctrl, pmbase + PM1_CNT);
+ printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
+ break;
+ case APM_CNT_ACPI_ENABLE:
+ pmctrl = inl(pmbase + PM1_CNT);
+ pmctrl |= SCI_EN;
+ outl(pmctrl, pmbase + PM1_CNT);
+ printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
+ break;
+ case APM_CNT_GNVS_UPDATE:
+ if (smm_initialized) {
+ printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n");
+ return;
+ }
+ gnvs = *(global_nvs_t **)0x500;
+ tcg = *(void **)0x504;
+ smi1 = *(void **)0x508;
+ smm_initialized = 1;
+ printk(BIOS_DEBUG, "SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1);
+ break;
+ }
+
+ tseg_fixup((void **)&mainboard_apmc);
+ if (mainboard_apmc)
+ mainboard_apmc(reg8);
+}
+
+static void southbridge_smi_pm1(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u16 pm1_sts;
+
+ pm1_sts = reset_pm1_status();
+ dump_pm1_status(pm1_sts);
+
+ /* While OSPM is not active, poweroff immediately
+ * on a power button event.
+ */
+ if (pm1_sts & PWRBTN_STS) {
+ // power button pressed
+ u32 reg32;
+ reg32 = (7 << 10) | (1 << 13);
+ outl(reg32, pmbase + PM1_CNT);
+ }
+}
+
+static void southbridge_smi_gpe0(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u32 gpe0_sts;
+
+ gpe0_sts = reset_gpe0_status();
+ dump_gpe0_status(gpe0_sts);
+}
+
+static void southbridge_smi_gpi(unsigned int node, smm_state_save_area_t *state_save)
+{
+ void (*mainboard_gpi)(u16 gpi_sts) = mainboard_smi_gpi;
+ u16 reg16;
+ reg16 = inw(pmbase + ALT_GP_SMI_STS);
+ outw(reg16, pmbase + ALT_GP_SMI_STS);
+
+ reg16 &= inw(pmbase + ALT_GP_SMI_EN);
+
+ tseg_fixup((void **)&mainboard_gpi);
+ if (mainboard_gpi) {
+ mainboard_gpi(reg16);
+ } else {
+ if (reg16)
+ printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16);
+ }
+
+ outw(reg16, pmbase + ALT_GP_SMI_STS);
+}
+
+static void southbridge_smi_mc(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + SMI_EN);
+
+ /* Are periodic SMIs enabled? */
+ if ((reg32 & MCSMI_EN) == 0)
+ return;
+
+ printk(BIOS_DEBUG, "Microcontroller SMI.\n");
+}
+
+
+
+static void southbridge_smi_tco(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u32 tco_sts;
+
+ tco_sts = reset_tco_status();
+
+ /* Any TCO event? */
+ if (!tco_sts)
+ return;
+
+ if (tco_sts & (1 << 8)) { // BIOSWR
+ u8 bios_cntl;
+
+ bios_cntl = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0xdc);
+
+ if (bios_cntl & 1) {
+ /* BWE is RW, so the SMI was caused by a
+ * write to BWE, not by a write to the BIOS
+ */
+
+ /* This is the place where we notice someone
+ * is trying to tinker with the BIOS. We are
+ * trying to be nice and just ignore it. A more
+ * resolute answer would be to power down the
+ * box.
+ */
+ printk(BIOS_DEBUG, "Switching back to RO\n");
+ pcie_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1));
+ } /* No else for now? */
+ } else if (tco_sts & (1 << 3)) { /* TIMEOUT */
+ /* Handle TCO timeout */
+ printk(BIOS_DEBUG, "TCO Timeout.\n");
+ } else if (!tco_sts) {
+ dump_tco_status(tco_sts);
+ }
+}
+
+static void southbridge_smi_periodic(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + SMI_EN);
+
+ /* Are periodic SMIs enabled? */
+ if ((reg32 & PERIODIC_EN) == 0)
+ return;
+
+ printk(BIOS_DEBUG, "Periodic SMI.\n");
+}
+
+static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *state_save)
+{
+#define IOTRAP(x) (trap_sts & (1 << x))
+ u32 trap_sts, trap_cycle;
+ u32 data, mask = 0;
+ int i;
+
+ trap_sts = RCBA32(0x1e00); // TRSR - Trap Status Register
+ RCBA32(0x1e00) = trap_sts; // Clear trap(s) in TRSR
+
+ trap_cycle = RCBA32(0x1e10);
+ for (i=16; i<20; i++) {
+ if (trap_cycle & (1 << i))
+ mask |= (0xff << ((i - 16) << 2));
+ }
+
+
+ /* IOTRAP(3) SMI function call */
+ if (IOTRAP(3)) {
+ if (gnvs && gnvs->smif)
+ io_trap_handler(gnvs->smif); // call function smif
+ return;
+ }
+
+ /* IOTRAP(2) currently unused
+ * IOTRAP(1) currently unused */
+
+ /* IOTRAP(0) SMIC */
+ if (IOTRAP(0)) {
+ if (!(trap_cycle & (1 << 24))) { // It's a write
+ printk(BIOS_DEBUG, "SMI1 command\n");
+ data = RCBA32(0x1e18);
+ data &= mask;
+ // if (smi1)
+ // southbridge_smi_command(data);
+ // return;
+ }
+ // Fall through to debug
+ }
+
+ printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc);
+ for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAPĀ = %d\n", i);
+ printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf);
+ printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask);
+ printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
+
+ if (!(trap_cycle & (1 << 24))) {
+ /* Write Cycle */
+ data = RCBA32(0x1e18);
+ printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data);
+ }
+#undef IOTRAP
+}
+
+typedef void (*smi_handler_t)(unsigned int node,
+ smm_state_save_area_t *state_save);
+
+static smi_handler_t southbridge_smi[32] = {
+ NULL, // [0] reserved
+ NULL, // [1] reserved
+ NULL, // [2] BIOS_STS
+ NULL, // [3] LEGACY_USB_STS
+ southbridge_smi_sleep, // [4] SLP_SMI_STS
+ southbridge_smi_apmc, // [5] APM_STS
+ NULL, // [6] SWSMI_TMR_STS
+ NULL, // [7] reserved
+ southbridge_smi_pm1, // [8] PM1_STS
+ southbridge_smi_gpe0, // [9] GPE0_STS
+ southbridge_smi_gpi, // [10] GPI_STS
+ southbridge_smi_mc, // [11] MCSMI_STS
+ NULL, // [12] DEVMON_STS
+ southbridge_smi_tco, // [13] TCO_STS
+ southbridge_smi_periodic, // [14] PERIODIC_STS
+ NULL, // [15] SERIRQ_SMI_STS
+ NULL, // [16] SMBUS_SMI_STS
+ NULL, // [17] LEGACY_USB2_STS
+ NULL, // [18] INTEL_USB2_STS
+ NULL, // [19] reserved
+ NULL, // [20] PCI_EXP_SMI_STS
+ southbridge_smi_monitor, // [21] MONITOR_STS
+ NULL, // [22] reserved
+ NULL, // [23] reserved
+ NULL, // [24] reserved
+ NULL, // [25] EL_SMI_STS
+ NULL, // [26] SPI_STS
+ NULL, // [27] reserved
+ NULL, // [28] reserved
+ NULL, // [29] reserved
+ NULL, // [30] reserved
+ NULL // [31] reserved
+};
+
+/**
+ * @brief Interrupt handler for SMI#
+ *
+ * @param smm_revision revision of the smm state save map
+ */
+
+void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save)
+{
+ int i, dump = 0;
+ u32 smi_sts;
+
+ /* Update global variable pmbase */
+ pmbase = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc;
+
+#if CONFIG_SMM_TSEG
+ /* Update global variable TSEG base */
+ tseg_base = pcie_read_config32(PCI_DEV(0, 0, 0), TSEG) & ~1;
+#endif
+
+ /* We need to clear the SMI status registers, or we won't see what's
+ * happening in the following calls.
+ */
+ smi_sts = reset_smi_status();
+
+ /* Call SMI sub handler for each of the status bits */
+ for (i = 0; i < 31; i++) {
+ if (smi_sts & (1 << i)) {
+ if (southbridge_smi[i]) {
+#if CONFIG_SMM_TSEG
+ smi_handler_t handler = (smi_handler_t)
+ ((u8*)southbridge_smi[i] + tseg_base);
+ if (handler)
+ handler(node, state_save);
+#else
+ southbridge_smi[i](node, state_save);
+#endif
+ } else {
+ printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no "
+ "handler available.\n", i);
+ dump = 1;
+ }
+ }
+ }
+
+ if(dump) {
+ dump_smi_status(smi_sts);
+ }
+
+}
diff --git a/src/southbridge/intel/bd82x6x/usb_debug.c b/src/southbridge/intel/bd82x6x/usb_debug.c
new file mode 100644
index 0000000000..4258a03608
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/usb_debug.c
@@ -0,0 +1,51 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <usbdebug.h>
+#include <device/pci_def.h>
+#include "pch.h"
+
+/* Required for successful build, but currently empty. */
+void set_debug_port(unsigned int port)
+{
+ /* Not needed, the ICH* southbridges hardcode physical USB port 1. */
+}
+
+void enable_usbdebug(unsigned int port)
+{
+ u32 dbgctl;
+ device_t dev = PCI_DEV(0, 0x1d, 7); /* USB EHCI, D29:F7 */
+
+ /* Set the EHCI BAR address. */
+ pci_write_config32(dev, EHCI_BAR_INDEX, CONFIG_EHCI_BAR);
+
+ /* Enable access to the EHCI memory space registers. */
+ pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY);
+
+ /* Force ownership of the Debug Port to the EHCI controller. */
+ printk(BIOS_DEBUG, "Enabling OWNER_CNT\n");
+ dbgctl = read32(CONFIG_EHCI_BAR + CONFIG_EHCI_DEBUG_OFFSET);
+ dbgctl |= (1 << 30);
+ write32(CONFIG_EHCI_BAR + CONFIG_EHCI_DEBUG_OFFSET, dbgctl);
+}
+
diff --git a/src/southbridge/intel/bd82x6x/usb_ehci.c b/src/southbridge/intel/bd82x6x/usb_ehci.c
new file mode 100644
index 0000000000..c299535456
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/usb_ehci.c
@@ -0,0 +1,124 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "pch.h"
+#include <usbdebug.h>
+#include <arch/io.h>
+
+static void usb_ehci_init(struct device *dev)
+{
+ u32 reg32;
+
+ /* Disable Wake on Disconnect in RMH */
+ reg32 = RCBA32(0x35b0);
+ reg32 |= 0x22;
+ RCBA32(0x35b0) = reg32;
+
+ printk(BIOS_DEBUG, "EHCI: Setting up controller.. ");
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 |= PCI_COMMAND_MASTER;
+ //reg32 |= PCI_COMMAND_SERR;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ printk(BIOS_DEBUG, "done.\n");
+}
+
+static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ u8 access_cntl;
+
+ access_cntl = pci_read_config8(dev, 0x80);
+
+ /* Enable writes to protected registers. */
+ pci_write_config8(dev, 0x80, access_cntl | 1);
+
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+
+ /* Restore protection. */
+ pci_write_config8(dev, 0x80, access_cntl);
+}
+
+static void usb_ehci_set_resources(struct device *dev)
+{
+#if CONFIG_USBDEBUG
+ struct resource *res;
+ u32 base;
+ u32 usb_debug;
+
+ usb_debug = get_ehci_debug();
+ set_ehci_debug(0);
+#endif
+ pci_dev_set_resources(dev);
+
+#if CONFIG_USBDEBUG
+ res = find_resource(dev, 0x10);
+ set_ehci_debug(usb_debug);
+ if (!res) return;
+ base = res->base;
+ set_ehci_base(base);
+ report_resource_stored(dev, res, "");
+#endif
+}
+
+
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = &usb_ehci_set_subsystem,
+};
+
+static struct device_operations usb_ehci_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = usb_ehci_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = usb_ehci_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver pch_usb_ehci1 __pci_driver = {
+ .ops = &usb_ehci_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c26,
+};
+static const struct pci_driver pch_usb_ehci2 __pci_driver = {
+ .ops = &usb_ehci_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1c2d,
+};
+static const struct pci_driver pch_usb_ehci3 __pci_driver = {
+ .ops = &usb_ehci_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1e26,
+};
+static const struct pci_driver pch_usb_ehci4 __pci_driver = {
+ .ops = &usb_ehci_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x1e2d,
+};
diff --git a/src/southbridge/intel/bd82x6x/watchdog.c b/src/southbridge/intel/bd82x6x/watchdog.c
new file mode 100644
index 0000000000..362e896df0
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/watchdog.c
@@ -0,0 +1,59 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2011 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <watchdog.h>
+
+ //
+ // Disable PCH Watchdog timer at SB_RCBA+0x3410
+ //
+ // Mmio32((MmPci32(0, 0, 0x1F, 0, 0xF0) & ~BIT0), 0x3410) |= 0x20;
+ //
+void watchdog_off(void)
+{
+ device_t dev;
+ unsigned long value, base;
+
+ /* Turn off the ICH7 watchdog. */
+ dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0));
+
+ /* Enable I/O space. */
+ value = pci_read_config16(dev, 0x04);
+ value |= (1 << 10);
+ pci_write_config16(dev, 0x04, value);
+
+ /* Get TCO base. */
+ base = (pci_read_config32(dev, 0x40) & 0x0fffe) + 0x60;
+
+ /* Disable the watchdog timer. */
+ value = inw(base + 0x08);
+ value |= 1 << 11;
+ outw(value, base + 0x08);
+
+ /* Clear TCO timeout status. */
+ outw(0x0008, base + 0x04);
+ outw(0x0002, base + 0x06);
+
+ printk(BIOS_DEBUG, "PCH watchdog disabled\n");
+}