summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/drivers/pc80/tpm/tpm.c4
-rw-r--r--src/soc/nvidia/tegra/usb.c54
-rw-r--r--src/soc/nvidia/tegra124/clock.c66
-rw-r--r--src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c10
-rw-r--r--src/soc/nvidia/tegra124/uart.c4
-rw-r--r--src/soc/nvidia/tegra132/clock.c45
-rw-r--r--src/soc/nvidia/tegra132/include/soc/tegra_dsi.h4
-rw-r--r--src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c5
-rw-r--r--src/soc/nvidia/tegra132/spi.c2
-rw-r--r--src/soc/nvidia/tegra132/uart.c4
-rw-r--r--src/soc/qualcomm/ipq806x/clock.c7
-rw-r--r--src/soc/qualcomm/ipq806x/include/soc/iomap.h4
-rw-r--r--src/soc/qualcomm/ipq806x/qup.c8
-rw-r--r--src/soc/qualcomm/ipq806x/usb.c51
-rw-r--r--src/soc/rockchip/rk3288/clock.c66
-rw-r--r--src/soc/rockchip/rk3288/edp.c26
-rw-r--r--src/soc/rockchip/rk3288/gpio.c3
-rw-r--r--src/soc/rockchip/rk3288/pwm.c5
-rw-r--r--src/soc/rockchip/rk3288/sdram.c31
-rw-r--r--src/soc/rockchip/rk3288/uart.c4
-rw-r--r--src/soc/rockchip/rk3288/vop.c28
-rw-r--r--src/soc/samsung/exynos5250/clock_init.c4
-rw-r--r--src/soc/samsung/exynos5250/dmc_init_ddr3.c13
-rw-r--r--src/soc/samsung/exynos5250/usb.c43
-rw-r--r--src/soc/samsung/exynos5420/dmc_init_ddr3.c28
-rw-r--r--src/soc/samsung/exynos5420/usb.c43
26 files changed, 402 insertions, 160 deletions
diff --git a/src/drivers/pc80/tpm/tpm.c b/src/drivers/pc80/tpm/tpm.c
index 012f61dbed..22dbc41144 100644
--- a/src/drivers/pc80/tpm/tpm.c
+++ b/src/drivers/pc80/tpm/tpm.c
@@ -52,10 +52,6 @@
TPM_DEBUG("Write reg 0x%x with 0x%x\n", (reg_), (val_))
#define printf(x...) printk(BIOS_ERR, x)
-#define readb(_a) (*(volatile unsigned char *) (_a))
-#define writeb(_v, _a) (*(volatile unsigned char *) (_a) = (_v))
-#define readl(_a) (*(volatile unsigned long *) (_a))
-#define writel(_v, _a) (*(volatile unsigned long *) (_a) = (_v))
/* coreboot wrapper for TPM driver (end) */
#ifndef CONFIG_TPM_TIS_BASE_ADDRESS
diff --git a/src/soc/nvidia/tegra/usb.c b/src/soc/nvidia/tegra/usb.c
index 4a069fa02e..0df16e2a7b 100644
--- a/src/soc/nvidia/tegra/usb.c
+++ b/src/soc/nvidia/tegra/usb.c
@@ -158,26 +158,60 @@ void usb_setup_utmip(void *usb_base)
/* Take stuff out of pwrdn and add some magic numbers from U-Boot */
write32(&usb->utmip.xcvr0,
- 0x8 << 25 | 0x3 << 22 | 0 << 21 | 0 << 18 | 0 << 16 | 0 << 14 | 1 << 13 | 0x1 << 10 | 0x1 << 8 | 0x4 << 0 | 0);
- write32(&usb->utmip.xcvr1, 0x7 << 18 | 0 << 4 | 0 << 2 | 0 << 0 | 0);
- write32(&usb->utmip.tx, 1 << 19 | 1 << 16 | 1 << 9 | 0);
+ 0x8 << 25 | /* HS slew rate [10:4] */
+ 0x3 << 22 | /* HS driver output 'SETUP' [6:4] */
+ 0 << 21 | /* LS bias selection */
+ 0 << 18 | /* PDZI pwrdn */
+ 0 << 16 | /* PD2 pwrdn */
+ 0 << 14 | /* PD pwrdn */
+ 1 << 13 | /* (rst) HS receiver terminations */
+ 0x1 << 10 | /* (rst) LS falling slew rate */
+ 0x1 << 8 | /* (rst) LS rising slew rate */
+ 0x4 << 0); /* HS driver output 'SETUP' [3:0] */
+ write32(&usb->utmip.xcvr1,
+ 0x7 << 18 | /* Termination range adjustment */
+ 0 << 4 | /* PDDR pwrdn */
+ 0 << 2 | /* PDCHRP pwrdn */
+ 0 << 0); /* PDDISC pwrdn */
+ write32(&usb->utmip.tx,
+ 1 << 19 | /* FS send initial J before sync(?) */
+ 1 << 16 | /* (rst) Allow stuff error on SoP */
+ 1 << 9); /* (rst) Check disc only on EoP */
write32(&usb->utmip.hsrx0,
- 0x2 << 30 | 1 << 28 | 0x1 << 24 | 0x3 << 21 | 0x11 << 15 | 0x10 << 10 | 0);
+ 0x2 << 30 | /* (rst) Keep pattern on active */
+ 1 << 28 | /* (rst) Realign inertia on pkt */
+ 0x1 << 24 | /* (rst) edges-1 to move sampling */
+ 0x3 << 21 | /* (rst) squelch delay on EoP */
+ 0x11 << 15 | /* cycles until IDLE */
+ 0x10 << 10); /* elastic input depth */
/* U-Boot claims the USBD values for these are used across all UTMI+
* PHYs. That sounds so horribly wrong that I'm not going to implement
* it, but keep it in mind if we're ever not using the USBD port. */
write32(&usb->utmip.bias0,
- 0x1 << 24 | 1 << 23 | 1 << 22 | 1 << 11 | 0 << 10 | 0x1 << 2 | 0x2 << 0 | 0);
-
- write32(&usb->utmip.bias1, khz / 2200 << 3 | 1 << 2 | 0 << 0 | 0);
-
- write32(&usb->utmip.debounce, 0xffff << 16 | 25 * khz / 10 << 0 | 0);
+ 0x1 << 24 | /* HS disconnect detect level [2] */
+ 1 << 23 | /* (rst) IDPD value */
+ 1 << 22 | /* (rst) IDPD select */
+ 1 << 11 | /* (rst) OTG pwrdn */
+ 0 << 10 | /* bias pwrdn */
+ 0x1 << 2 | /* HS disconnect detect level [1:0] */
+ 0x2 << 0); /* HS squelch detect level */
+
+ write32(&usb->utmip.bias1,
+ khz / 2200 << 3 | /* bias pwrdn cycles (20us?) */
+ 1 << 2 | /* (rst) VBUS wakeup pwrdn */
+ 0 << 0); /* PDTRK pwrdn */
+
+ write32(&usb->utmip.debounce,
+ 0xffff << 16 | /* (rst) */
+ 25 * khz / 10 << 0); /* TODO: what's this, really? */
udelay(1);
setbits_le32(&usb->utmip.misc1, 1 << 30); /* PHY_XTAL_CLKEN */
- write32(&usb->suspend_ctrl, 1 << 12 | 0 << 11 | 0);
+ write32(&usb->suspend_ctrl,
+ 1 << 12 | /* UTMI+ enable */
+ 0 << 11); /* UTMI+ reset */
usb_ehci_reset_and_prepare(usb, USB_PHY_UTMIP);
printk(BIOS_DEBUG, "USB controller @ %p set up with UTMI+ PHY\n",usb_base);
diff --git a/src/soc/nvidia/tegra124/clock.c b/src/soc/nvidia/tegra124/clock.c
index 1d124b220f..8009b48080 100644
--- a/src/soc/nvidia/tegra124/clock.c
+++ b/src/soc/nvidia/tegra124/clock.c
@@ -243,14 +243,25 @@ static void init_utmip_pll(void)
clrbits_le32(&clk_rst->utmip_pll_cfg2, 1 << 30); /* PHY_XTAL_CLKEN */
udelay(1);
- write32(&clk_rst->utmip_pll_cfg0, 80 << 16 | 1 << 8 | 0); /* 960MHz * 1 / 80 == 12 MHz */
+ write32(&clk_rst->utmip_pll_cfg0, /* 960MHz * 1 / 80 == 12 MHz */
+ 80 << 16 | /* (rst) phy_divn */
+ 1 << 8); /* (rst) phy_divm */
write32(&clk_rst->utmip_pll_cfg1,
- CEIL_DIV(khz, 8000) << 27 | 0 << 16 | 0 << 14 | 0 << 12 | CEIL_DIV(khz, 102) << 0 | 0);
+ CEIL_DIV(khz, 8000) << 27 | /* pllu_enbl_cnt / 8 (1us) */
+ 0 << 16 | /* PLLU pwrdn */
+ 0 << 14 | /* pll_enable pwrdn */
+ 0 << 12 | /* pll_active pwrdn */
+ CEIL_DIV(khz, 102) << 0); /* phy_stbl_cnt / 256 (2.5ms) */
/* TODO: TRM can't decide if actv is 5us or 10us, keep an eye on it */
write32(&clk_rst->utmip_pll_cfg2,
- 0 << 24 | CEIL_DIV(khz, 3200) << 18 | CEIL_DIV(khz, 256) << 6 | 0 << 4 | 0 << 2 | 0 << 0 | 0);
+ 0 << 24 | /* SAMP_D/XDEV pwrdn */
+ CEIL_DIV(khz, 3200) << 18 | /* phy_actv_cnt / 16 (5us) */
+ CEIL_DIV(khz, 256) << 6 | /* pllu_stbl_cnt / 256 (1ms) */
+ 0 << 4 | /* SAMP_C/USB3 pwrdn */
+ 0 << 2 | /* SAMP_B/XHOST pwrdn */
+ 0 << 0); /* SAMP_A/USBD pwrdn */
setbits_le32(&clk_rst->utmip_pll_cfg2, 1 << 30); /* PHY_XTAL_CLKEN */
}
@@ -387,8 +398,8 @@ clock_display(u32 frequency)
* been determined through trial and error (must lead to div 13 at 24MHz). */
void clock_early_uart(void)
{
- write32(&clk_rst->clk_src_uarta,
- CLK_M << CLK_SOURCE_SHIFT | CLK_UART_DIV_OVERRIDE | CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900));
+ write32(&clk_rst->clk_src_uarta, CLK_M << CLK_SOURCE_SHIFT |
+ CLK_UART_DIV_OVERRIDE | CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900));
setbits_le32(&clk_rst->clk_out_enb_l, CLK_L_UARTA);
udelay(2);
clrbits_le32(&clk_rst->rst_dev_l, CLK_L_UARTA);
@@ -484,7 +495,11 @@ void clock_cpu0_config(void *entry)
// Set up cclk_brst and divider.
write32(&clk_rst->cclk_brst_pol,
- (CRC_CCLK_BRST_POL_PLLX_OUT0 << 0) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 4) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 8) | (CRC_CCLK_BRST_POL_PLLX_OUT0 << 12) | (CRC_CCLK_BRST_POL_CPU_STATE_RUN << 28));
+ (CRC_CCLK_BRST_POL_PLLX_OUT0 << 0) |
+ (CRC_CCLK_BRST_POL_PLLX_OUT0 << 4) |
+ (CRC_CCLK_BRST_POL_PLLX_OUT0 << 8) |
+ (CRC_CCLK_BRST_POL_PLLX_OUT0 << 12) |
+ (CRC_CCLK_BRST_POL_CPU_STATE_RUN << 28));
write32(&clk_rst->super_cclk_div,
CRC_SUPER_CCLK_DIVIDER_SUPER_CDIV_ENB);
@@ -506,20 +521,31 @@ void clock_cpu0_remove_reset(void)
write32(&clk_rst->rst_cpug_cmplx_clr, CRC_RST_CPUG_CLR_NONCPU);
// Disable the various resets on the CPUs.
write32(&clk_rst->rst_cpug_cmplx_clr,
- CRC_RST_CPUG_CLR_CPU0 | CRC_RST_CPUG_CLR_CPU1 | CRC_RST_CPUG_CLR_CPU2 | CRC_RST_CPUG_CLR_CPU3 | CRC_RST_CPUG_CLR_DBG0 | CRC_RST_CPUG_CLR_DBG1 | CRC_RST_CPUG_CLR_DBG2 | CRC_RST_CPUG_CLR_DBG3 | CRC_RST_CPUG_CLR_CORE0 | CRC_RST_CPUG_CLR_CORE1 | CRC_RST_CPUG_CLR_CORE2 | CRC_RST_CPUG_CLR_CORE3 | CRC_RST_CPUG_CLR_CX0 | CRC_RST_CPUG_CLR_CX1 | CRC_RST_CPUG_CLR_CX2 | CRC_RST_CPUG_CLR_CX3 | CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG);
+ CRC_RST_CPUG_CLR_CPU0 | CRC_RST_CPUG_CLR_CPU1 |
+ CRC_RST_CPUG_CLR_CPU2 | CRC_RST_CPUG_CLR_CPU3 |
+ CRC_RST_CPUG_CLR_DBG0 | CRC_RST_CPUG_CLR_DBG1 |
+ CRC_RST_CPUG_CLR_DBG2 | CRC_RST_CPUG_CLR_DBG3 |
+ CRC_RST_CPUG_CLR_CORE0 | CRC_RST_CPUG_CLR_CORE1 |
+ CRC_RST_CPUG_CLR_CORE2 | CRC_RST_CPUG_CLR_CORE3 |
+ CRC_RST_CPUG_CLR_CX0 | CRC_RST_CPUG_CLR_CX1 |
+ CRC_RST_CPUG_CLR_CX2 | CRC_RST_CPUG_CLR_CX3 |
+ CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG);
// Disable the reset on the non-CPU parts of the slow cluster.
write32(&clk_rst->rst_cpulp_cmplx_clr, CRC_RST_CPULP_CLR_NONCPU);
// Disable the various resets on the LP CPU.
write32(&clk_rst->rst_cpulp_cmplx_clr,
- CRC_RST_CPULP_CLR_CPU0 | CRC_RST_CPULP_CLR_DBG0 | CRC_RST_CPULP_CLR_CORE0 | CRC_RST_CPULP_CLR_CX0 | CRC_RST_CPULP_CLR_L2 | CRC_RST_CPULP_CLR_PDBG);
+ CRC_RST_CPULP_CLR_CPU0 | CRC_RST_CPULP_CLR_DBG0 |
+ CRC_RST_CPULP_CLR_CORE0 | CRC_RST_CPULP_CLR_CX0 |
+ CRC_RST_CPULP_CLR_L2 | CRC_RST_CPULP_CLR_PDBG);
}
void clock_halt_avp(void)
{
for (;;) {
write32(&flow->halt_cop_events,
- FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ | FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT);
+ FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ |
+ FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT);
}
}
@@ -537,11 +563,13 @@ void clock_init(void)
/* Typical ratios are 1:2:2 or 1:2:3 sclk:hclk:pclk (See: APB DMA
* features section in the TRM). */
write32(&clk_rst->clk_sys_rate,
- TEGRA_HCLK_RATIO << HCLK_DIVISOR_SHIFT | TEGRA_PCLK_RATIO << PCLK_DIVISOR_SHIFT);
- write32(&clk_rst->pllc_out,
- CLK_DIVIDER(TEGRA_PLLC_KHZ, TEGRA_SCLK_KHZ) << PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN | PLL_OUT_RSTN);
- write32(&clk_rst->sclk_brst_pol,
- SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT); /* sclk = 300 MHz */
+ TEGRA_HCLK_RATIO << HCLK_DIVISOR_SHIFT |
+ TEGRA_PCLK_RATIO << PCLK_DIVISOR_SHIFT);
+ write32(&clk_rst->pllc_out, CLK_DIVIDER(TEGRA_PLLC_KHZ, TEGRA_SCLK_KHZ)
+ << PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN | PLL_OUT_RSTN);
+ write32(&clk_rst->sclk_brst_pol, /* sclk = 300 MHz */
+ SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT |
+ SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT);
/* Change the oscillator drive strength (from U-Boot -- why?) */
clrsetbits_le32(&clk_rst->osc_ctrl, OSC_XOFS_MASK,
@@ -560,9 +588,15 @@ void clock_init(void)
/* Set up PLLP_OUT(1|2|3|4) divisor to generate (9.6|48|102|204)MHz */
write32(&clk_rst->pllp_outa,
- (CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT);
+ (CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT |
+ PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT |
+ (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT |
+ PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT);
write32(&clk_rst->pllp_outb,
- (CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT);
+ (CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT |
+ PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT |
+ (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT |
+ PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT);
/* init pllx */
init_pll(&clk_rst->pllx_base, &clk_rst->pllx_misc,
diff --git a/src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c b/src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c
index 2ed2103d15..e8cd5716f4 100644
--- a/src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c
+++ b/src/soc/nvidia/tegra124/lp0/tegra_lp0_resume.c
@@ -275,7 +275,7 @@ inline static uint32_t read32(const void *addr)
return *(volatile uint32_t *)addr;
}
-inline static void write32(uint32_t val, void *addr)
+inline static void write32(void *addr, uint32_t val)
{
*(volatile uint32_t *)addr = val;
}
@@ -483,7 +483,10 @@ static void clear_cpu_resets(void)
// Clear software controlled reset of the fast cluster.
write32(clk_rst_rst_cpug_cmplx_clr_ptr,
- CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 | CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 | CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 | CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3);
+ CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 |
+ CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 |
+ CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 |
+ CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3);
}
@@ -513,8 +516,7 @@ static void power_on_partition(unsigned id)
uint32_t bit = 0x1 << id;
if (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit)) {
// Partition is not on. Turn it on.
- write32(pmc_ctlr_pwrgate_toggle_ptr,
- id | PWRGATE_TOGGLE_START);
+ write32(pmc_ctlr_pwrgate_toggle_ptr, id | PWRGATE_TOGGLE_START);
// Wait until the partition is powerd on.
while (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit))
diff --git a/src/soc/nvidia/tegra124/uart.c b/src/soc/nvidia/tegra124/uart.c
index 70fafee83e..f1c70aa43a 100644
--- a/src/soc/nvidia/tegra124/uart.c
+++ b/src/soc/nvidia/tegra124/uart.c
@@ -67,8 +67,8 @@ static void tegra124_uart_init(struct tegra124_uart *uart_ptr)
// Hide the divisor latches.
write8(&uart_ptr->lcr, line_config);
// Enable FIFOs, and clear receive and transmit.
- write8(&uart_ptr->fcr,
- UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT);
+ write8(&uart_ptr->fcr, UART8250_FCR_FIFO_EN |
+ UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT);
}
static unsigned char tegra124_uart_rx_byte(struct tegra124_uart *uart_ptr)
diff --git a/src/soc/nvidia/tegra132/clock.c b/src/soc/nvidia/tegra132/clock.c
index c13a086501..1495a9a7e8 100644
--- a/src/soc/nvidia/tegra132/clock.c
+++ b/src/soc/nvidia/tegra132/clock.c
@@ -243,14 +243,25 @@ static void init_utmip_pll(void)
clrbits_le32(CLK_RST_REG(utmip_pll_cfg2), 1 << 30); /* PHY_XTAL_CLKEN */
udelay(1);
- write32(CLK_RST_REG(utmip_pll_cfg0), 80 << 16 | 1 << 8 | 0);/* 960MHz * 1 / 80 == 12 MHz */
+ write32(CLK_RST_REG(utmip_pll_cfg0), /* 960MHz * 1 / 80 == 12 MHz */
+ 80 << 16 | /* (rst) phy_divn */
+ 1 << 8); /* (rst) phy_divm */
write32(CLK_RST_REG(utmip_pll_cfg1),
- div_round_up(khz, 8000) << 27 | 0 << 16 | 0 << 14 | 0 << 12 | div_round_up(khz, 102) << 0 | 0);
+ div_round_up(khz, 8000) << 27 | /* pllu_enbl_cnt / 8 (1us) */
+ 0 << 16 | /* PLLU pwrdn */
+ 0 << 14 | /* pll_enable pwrdn */
+ 0 << 12 | /* pll_active pwrdn */
+ div_round_up(khz, 102) << 0); /* phy_stbl_cnt / 256 (2.5ms) */
/* TODO: TRM can't decide if actv is 5us or 10us, keep an eye on it */
write32(CLK_RST_REG(utmip_pll_cfg2),
- 0 << 24 | div_round_up(khz, 3200) << 18 | div_round_up(khz, 256) << 6 | 0 << 4 | 0 << 2 | 0 << 0 | 0);
+ 0 << 24 | /* SAMP_D/XDEV pwrdn */
+ div_round_up(khz, 3200) << 18 | /* phy_actv_cnt / 16 (5us) */
+ div_round_up(khz, 256) << 6 | /* pllu_stbl_cnt / 256 (1ms) */
+ 0 << 4 | /* SAMP_C/USB3 pwrdn */
+ 0 << 2 | /* SAMP_B/XHOST pwrdn */
+ 0 << 0); /* SAMP_A/USBD pwrdn */
setbits_le32(CLK_RST_REG(utmip_pll_cfg2), 1 << 30); /* PHY_XTAL_CLKEN */
}
@@ -388,7 +399,8 @@ u32 clock_configure_plld(u32 frequency)
void clock_early_uart(void)
{
write32(CLK_RST_REG(clk_src_uarta),
- CLK_SRC_DEV_ID(UARTA, CLK_M) << CLK_SOURCE_SHIFT | CLK_UART_DIV_OVERRIDE | CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900));
+ CLK_SRC_DEV_ID(UARTA, CLK_M) << CLK_SOURCE_SHIFT |
+ CLK_UART_DIV_OVERRIDE | CLK_DIVIDER(TEGRA_CLK_M_KHZ, 1900));
clock_enable_clear_reset_l(CLK_L_UARTA);
}
@@ -513,7 +525,8 @@ void clock_halt_avp(void)
{
for (;;)
write32(&flow->halt_cop_events,
- FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ | FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT);
+ FLOW_EVENT_JTAG | FLOW_EVENT_LIC_IRQ |
+ FLOW_EVENT_GIC_IRQ | FLOW_MODE_WAITEVENT);
}
void clock_init(void)
@@ -529,12 +542,14 @@ void clock_init(void)
/* Typical ratios are 1:2:2 or 1:2:3 sclk:hclk:pclk (See: APB DMA
* features section in the TRM). */
- write32(CLK_RST_REG(clk_sys_rate),
- 1 << HCLK_DIVISOR_SHIFT | 0 << PCLK_DIVISOR_SHIFT); /* pclk = hclk = sclk/2 */
+ write32(CLK_RST_REG(clk_sys_rate), /* pclk = hclk = sclk/2 */
+ 1 << HCLK_DIVISOR_SHIFT | 0 << PCLK_DIVISOR_SHIFT);
write32(CLK_RST_REG(pllc_out),
- CLK_DIVIDER(TEGRA_PLLC_KHZ, 300000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_CLKEN | PLL_OUT_RSTN);
- write32(CLK_RST_REG(sclk_brst_pol),
- SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT); /* sclk = 300 MHz */
+ CLK_DIVIDER(TEGRA_PLLC_KHZ, 300000) << PLL_OUT_RATIO_SHIFT |
+ PLL_OUT_CLKEN | PLL_OUT_RSTN);
+ write32(CLK_RST_REG(sclk_brst_pol), /* sclk = 300 MHz */
+ SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT |
+ SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT);
/* Change the oscillator drive strength (from U-Boot -- why?) */
clrsetbits_le32(CLK_RST_REG(osc_ctrl), OSC_XOFS_MASK,
@@ -550,9 +565,15 @@ void clock_init(void)
/* Set up PLLP_OUT(1|2|3|4) divisor to generate (9.6|48|102|204)MHz */
write32(CLK_RST_REG(pllp_outa),
- (CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT);
+ (CLK_DIVIDER(TEGRA_PLLP_KHZ, 9600) << PLL_OUT_RATIO_SHIFT |
+ PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT1_SHIFT |
+ (CLK_DIVIDER(TEGRA_PLLP_KHZ, 48000) << PLL_OUT_RATIO_SHIFT |
+ PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT2_SHIFT);
write32(CLK_RST_REG(pllp_outb),
- (CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT | (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT | PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT);
+ (CLK_DIVIDER(TEGRA_PLLP_KHZ, 102000) << PLL_OUT_RATIO_SHIFT |
+ PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT3_SHIFT |
+ (CLK_DIVIDER(TEGRA_PLLP_KHZ, 204000) << PLL_OUT_RATIO_SHIFT |
+ PLL_OUT_OVR | PLL_OUT_CLKEN | PLL_OUT_RSTN) << PLL_OUT4_SHIFT);
/* init pllu */
init_pll(CLK_RST_REG(pllu_base), CLK_RST_REG(pllu_misc),
diff --git a/src/soc/nvidia/tegra132/include/soc/tegra_dsi.h b/src/soc/nvidia/tegra132/include/soc/tegra_dsi.h
index 830257d7cc..4e03d93cb4 100644
--- a/src/soc/nvidia/tegra132/include/soc/tegra_dsi.h
+++ b/src/soc/nvidia/tegra132/include/soc/tegra_dsi.h
@@ -207,13 +207,13 @@ struct tegra_dsi {
static inline unsigned long tegra_dsi_readl(struct tegra_dsi *dsi,
unsigned long reg)
{
- return readl(dsi->regs + (reg << 2));
+ return read32(dsi->regs + (reg << 2));
}
static inline void tegra_dsi_writel(struct tegra_dsi *dsi, unsigned long value,
unsigned long reg)
{
- writel(value, dsi->regs + (reg << 2));
+ write32(dsi->regs + (reg << 2), value);
}
#endif /* __TEGRA_DSI_H__ */
diff --git a/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c b/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c
index 8392a58228..621c4b72e3 100644
--- a/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c
+++ b/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c
@@ -254,7 +254,7 @@ inline static uint32_t read32(const void *addr)
return *(volatile uint32_t *)addr;
}
-inline static void write32(uint32_t val, void *addr)
+inline static void write32(void *addr, uint32_t val)
{
*(volatile uint32_t *)addr = val;
}
@@ -542,8 +542,7 @@ static void power_on_partition(unsigned id)
uint32_t bit = 0x1 << id;
if (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit)) {
// Partition is not on. Turn it on.
- write32(pmc_ctlr_pwrgate_toggle_ptr,
- id | PWRGATE_TOGGLE_START);
+ write32(pmc_ctlr_pwrgate_toggle_ptr, id | PWRGATE_TOGGLE_START);
// Wait until the partition is powerd on.
while (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit))
diff --git a/src/soc/nvidia/tegra132/spi.c b/src/soc/nvidia/tegra132/spi.c
index 33620fb202..6fd1933b92 100644
--- a/src/soc/nvidia/tegra132/spi.c
+++ b/src/soc/nvidia/tegra132/spi.c
@@ -494,7 +494,7 @@ static int tegra_spi_dma_prepare(struct tegra_spi_channel *spi,
dcache_clean_by_mva(spi->out_buf, bytes);
write32(&spi->dma_out->regs->apb_ptr,
- (uintptr_t) & spi->regs->tx_fifo);
+ (uintptr_t)&spi->regs->tx_fifo);
write32(&spi->dma_out->regs->ahb_ptr, (uintptr_t)spi->out_buf);
setbits_le32(&spi->dma_out->regs->csr, APB_CSR_DIR);
setup_dma_params(spi, spi->dma_out);
diff --git a/src/soc/nvidia/tegra132/uart.c b/src/soc/nvidia/tegra132/uart.c
index e7b7ca9f69..386eaf9005 100644
--- a/src/soc/nvidia/tegra132/uart.c
+++ b/src/soc/nvidia/tegra132/uart.c
@@ -74,8 +74,8 @@ static void tegra132_uart_init(struct tegra132_uart *uart_ptr)
// Hide the divisor latches.
write8(&uart_ptr->lcr, line_config);
// Enable FIFOs, and clear receive and transmit.
- write8(&uart_ptr->fcr,
- UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT);
+ write8(&uart_ptr->fcr, UART8250_FCR_FIFO_EN |
+ UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT);
}
static unsigned char tegra132_uart_rx_byte(struct tegra132_uart *uart_ptr)
diff --git a/src/soc/qualcomm/ipq806x/clock.c b/src/soc/qualcomm/ipq806x/clock.c
index 0ffd83f032..d30771fb2e 100644
--- a/src/soc/qualcomm/ipq806x/clock.c
+++ b/src/soc/qualcomm/ipq806x/clock.c
@@ -136,7 +136,12 @@ void usb_clock_config(void)
write32(USB30_1_MOC_UTMI_CLK_CTL, 0x10);
write32(USB30_RESET,
- 1 << 5 | 1 << 4 | 1 << 3 | 1 << 2 | 1 << 1 | 1 << 0 | 0);
+ 1 << 5 | /* assert port2 HS PHY async reset */
+ 1 << 4 | /* assert master async reset */
+ 1 << 3 | /* assert sleep async reset */
+ 1 << 2 | /* assert MOC UTMI async reset */
+ 1 << 1 | /* assert power-on async reset */
+ 1 << 0); /* assert PHY async reset */
udelay(5);
write32(USB30_RESET, 0); /* deassert all USB resets again */
}
diff --git a/src/soc/qualcomm/ipq806x/include/soc/iomap.h b/src/soc/qualcomm/ipq806x/include/soc/iomap.h
index f2500f1cbf..4a3aa49140 100644
--- a/src/soc/qualcomm/ipq806x/include/soc/iomap.h
+++ b/src/soc/qualcomm/ipq806x/include/soc/iomap.h
@@ -44,8 +44,8 @@
macros for read/write. Hence, special macros for readl_i and writel_i are
included to do this in one place for all occurrences in vendor code
*/
-#define readl_i(a) readl((const void *)(a))
-#define writel_i(v,a) writel(v,(void *)a)
+#define readl_i(a) read32((const void *)(a))
+#define writel_i(v,a) write32((void *)a, v)
#define clrsetbits_le32_i(addr, clear, set) \
clrsetbits_le32(((void *)(addr)), (clear), (set))
diff --git a/src/soc/qualcomm/ipq806x/qup.c b/src/soc/qualcomm/ipq806x/qup.c
index bc78e7c67a..a497514baf 100644
--- a/src/soc/qualcomm/ipq806x/qup.c
+++ b/src/soc/qualcomm/ipq806x/qup.c
@@ -167,10 +167,10 @@ static qup_return_t qup_i2c_write_fifo(gsbi_id_t gsbi_id, qup_data_t *p_tx_obj,
while (data_len) {
if (data_len == 1 && stop_seq) {
write32(QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO),
- (QUP_I2C_STOP_SEQ | QUP_I2C_DATA(data_ptr[idx])));
+ QUP_I2C_STOP_SEQ | QUP_I2C_DATA(data_ptr[idx]));
} else {
write32(QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO),
- (QUP_I2C_DATA_SEQ | QUP_I2C_DATA(data_ptr[idx])));
+ QUP_I2C_DATA_SEQ | QUP_I2C_DATA(data_ptr[idx]));
}
data_len--;
idx++;
@@ -235,10 +235,10 @@ static qup_return_t qup_i2c_read_fifo(gsbi_id_t gsbi_id, qup_data_t *p_tx_obj)
qup_set_state(gsbi_id, QUP_STATE_RUN);
write32(QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO),
- (QUP_I2C_START_SEQ | (QUP_I2C_ADDR(addr) | QUP_I2C_SLAVE_READ)));
+ QUP_I2C_START_SEQ | (QUP_I2C_ADDR(addr) | QUP_I2C_SLAVE_READ));
write32(QUP_ADDR(gsbi_id, QUP_OUTPUT_FIFO),
- (QUP_I2C_RECV_SEQ | data_len));
+ QUP_I2C_RECV_SEQ | data_len);
ret = qup_fifo_wait_while(gsbi_id, OUTPUT_FIFO_NOT_EMPTY);
if (ret)
diff --git a/src/soc/qualcomm/ipq806x/usb.c b/src/soc/qualcomm/ipq806x/usb.c
index d7dac7243c..72ec19ecdf 100644
--- a/src/soc/qualcomm/ipq806x/usb.c
+++ b/src/soc/qualcomm/ipq806x/usb.c
@@ -102,15 +102,32 @@ static struct usb_dwc3 * const usb_host2_dwc3 = (void *)USB_HOST2_DWC3_BASE;
static void setup_dwc3(struct usb_dwc3 *dwc3)
{
write32(&dwc3->usb3pipectl,
- 0x1 << 31 | 0x1 << 25 | 0x1 << 24 | 0x1 << 19 | 0x1 << 18 | 0x1 << 1 | 0x1 << 0 | 0);
+ 0x1 << 31 | /* assert PHY soft reset */
+ 0x1 << 25 | /* (default) U1/U2 exit fail -> recovery? */
+ 0x1 << 24 | /* (default) activate PHY low power states */
+ 0x1 << 19 | /* (default) PHY low power delay value */
+ 0x1 << 18 | /* (default) activate PHY low power delay */
+ 0x1 << 1 | /* (default) Tx deemphasis value */
+ 0x1 << 0); /* (default) elastic buffer mode */
write32(&dwc3->usb2phycfg,
- 0x1 << 31 | 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0);
+ 0x1 << 31 | /* assert PHY soft reset */
+ 0x9 << 10 | /* (default) PHY clock turnaround 8-bit UTMI+ */
+ 0x1 << 8 | /* (default) enable PHY sleep in L1 */
+ 0x1 << 6); /* (default) enable PHY suspend */
write32(&dwc3->ctl,
- 0x2 << 19 | 0x1 << 16 | 0x1 << 12 | 0x1 << 11 | 0x1 << 10 | 0x1 << 2 | 0);
-
- write32(&dwc3->uctl, 0x32 << 22 | 0x1 << 15 | 0x10 << 0 | 0);
+ 0x2 << 19 | /* (default) suspend clock scaling */
+ 0x1 << 16 | /* retry SS three times before HS downgrade */
+ 0x1 << 12 | /* port capability HOST */
+ 0x1 << 11 | /* assert core soft reset */
+ 0x1 << 10 | /* (default) sync ITP to refclk */
+ 0x1 << 2); /* U2 exit after 8us LFPS (instead of 248ns) */
+
+ write32(&dwc3->uctl,
+ 0x32 << 22 | /* (default) reference clock period in ns */
+ 0x1 << 15 | /* (default) XHCI compliant device addressing */
+ 0x10 << 0); /* (default) devices time out after 32us */
udelay(5);
@@ -122,13 +139,31 @@ static void setup_dwc3(struct usb_dwc3 *dwc3)
static void setup_phy(struct usb_qc_phy *phy)
{
write32(&phy->ss_phy_ctrl,
- 0x1 << 24 | 0x1 << 8 | 0x1 << 7 | 0x19 << 0 | 0);
+ 0x1 << 24 | /* Indicate VBUS power present */
+ 0x1 << 8 | /* Enable USB3 ref clock to prescaler */
+ 0x1 << 7 | /* assert SS PHY reset */
+ 0x19 << 0); /* (default) reference clock multiplier */
write32(&phy->hs_phy_ctrl,
- 0x1 << 26 | 0x1 << 25 | 0x1 << 24 | 0x1 << 21 | 0x1 << 20 | 0x1 << 18 | 0x1 << 17 | 0x1 << 11 | 0x1 << 9 | 0x1 << 8 | 0x1 << 7 | 0x7 << 4 | 0x1 << 1 | 0);
+ 0x1 << 26 | /* (default) unclamp DPSE/DMSE VLS */
+ 0x1 << 25 | /* (default) select freeclk for utmi_clk */
+ 0x1 << 24 | /* (default) unclamp DMSE VLS */
+ 0x1 << 21 | /* (default) enable UTMI clock */
+ 0x1 << 20 | /* set OTG VBUS as valid */
+ 0x1 << 18 | /* use ref clock from core */
+ 0x1 << 17 | /* (default) unclamp DPSE VLS */
+ 0x1 << 11 | /* force xo/bias/pll to stay on in suspend */
+ 0x1 << 9 | /* (default) unclamp IDHV */
+ 0x1 << 8 | /* (default) unclamp VLS (again???) */
+ 0x1 << 7 | /* (default) unclamp HV VLS */
+ 0x7 << 4 | /* select frequency (no idea which one) */
+ 0x1 << 1); /* (default) "retention enable" */
write32(&phy->ss_phy_param1,
- 0x6e << 20 | 0x20 << 14 | 0x17 << 8 | 0x9 << 3 | 0);
+ 0x6e << 20 | /* full TX swing amplitude */
+ 0x20 << 14 | /* (default) 6dB TX deemphasis */
+ 0x17 << 8 | /* 3.5dB TX deemphasis */
+ 0x9 << 3); /* (default) LoS detector level */
write32(&phy->general_cfg, 0x1 << 2); /* set XHCI 1.00 compliance */
diff --git a/src/soc/rockchip/rk3288/clock.c b/src/soc/rockchip/rk3288/clock.c
index a9c888d631..89503e51db 100644
--- a/src/soc/rockchip/rk3288/clock.c
+++ b/src/soc/rockchip/rk3288/clock.c
@@ -220,7 +220,8 @@ static int rkclk_set_pll(u32 *pll_con, const struct pll_div *div)
write32(&pll_con[3], RK_SETBITS(PLL_RESET_MSK));
write32(&pll_con[0],
- RK_CLRSETBITS(PLL_NR_MSK, (div->nr - 1) << PLL_NR_SHIFT) | RK_CLRSETBITS(PLL_OD_MSK, (div->no - 1)));
+ RK_CLRSETBITS(PLL_NR_MSK, (div->nr - 1) << PLL_NR_SHIFT) |
+ RK_CLRSETBITS(PLL_OD_MSK, (div->no - 1)));
write32(&pll_con[1], RK_CLRSETBITS(PLL_NF_MSK, (div->nf - 1)));
@@ -259,7 +260,8 @@ void rkclk_init(void)
/* pll enter slow-mode */
write32(&cru_ptr->cru_mode_con,
- RK_CLRSETBITS(GPLL_MODE_MSK, GPLL_MODE_SLOW) | RK_CLRSETBITS(CPLL_MODE_MSK, CPLL_MODE_SLOW));
+ RK_CLRSETBITS(GPLL_MODE_MSK, GPLL_MODE_SLOW) |
+ RK_CLRSETBITS(CPLL_MODE_MSK, CPLL_MODE_SLOW));
/* init pll */
rkclk_set_pll(&cru_ptr->cru_gpll_con[0], &gpll_init_cfg);
@@ -288,8 +290,14 @@ void rkclk_init(void)
assert((pclk_div + 1) * PD_BUS_PCLK_HZ ==
PD_BUS_ACLK_HZ && pclk_div < 0x7);
- write32(&cru_ptr->cru_clksel_con[1],
- RK_SETBITS(PD_BUS_SEL_GPLL) | RK_CLRSETBITS(PD_BUS_PCLK_DIV_MSK, pclk_div << PD_BUS_PCLK_DIV_SHIFT) | RK_CLRSETBITS(PD_BUS_HCLK_DIV_MSK, hclk_div << PD_BUS_HCLK_DIV_SHIFT) | RK_CLRSETBITS(PD_BUS_ACLK_DIV0_MASK, aclk_div << PD_BUS_ACLK_DIV0_SHIFT) | RK_CLRSETBITS(PD_BUS_ACLK_DIV1_MASK, 0 << 0));
+ write32(&cru_ptr->cru_clksel_con[1], RK_SETBITS(PD_BUS_SEL_GPLL) |
+ RK_CLRSETBITS(PD_BUS_PCLK_DIV_MSK,
+ pclk_div << PD_BUS_PCLK_DIV_SHIFT) |
+ RK_CLRSETBITS(PD_BUS_HCLK_DIV_MSK,
+ hclk_div << PD_BUS_HCLK_DIV_SHIFT) |
+ RK_CLRSETBITS(PD_BUS_ACLK_DIV0_MASK,
+ aclk_div << PD_BUS_ACLK_DIV0_SHIFT) |
+ RK_CLRSETBITS(PD_BUS_ACLK_DIV1_MASK, 0 << 0));
/*
* peri clock pll source selection and
@@ -306,12 +314,18 @@ void rkclk_init(void)
assert((1 << pclk_div) * PERI_PCLK_HZ ==
PERI_ACLK_HZ && (pclk_div < 0x4));
- write32(&cru_ptr->cru_clksel_con[10],
- RK_SETBITS(PERI_SEL_GPLL) | RK_CLRSETBITS(PERI_PCLK_DIV_MSK, pclk_div << PERI_PCLK_DIV_SHIFT) | RK_CLRSETBITS(PERI_HCLK_DIV_MSK, hclk_div << PERI_HCLK_DIV_SHIFT) | RK_CLRSETBITS(PERI_ACLK_DIV_MSK, aclk_div << PERI_ACLK_DIV_SHIFT));
+ write32(&cru_ptr->cru_clksel_con[10], RK_SETBITS(PERI_SEL_GPLL) |
+ RK_CLRSETBITS(PERI_PCLK_DIV_MSK,
+ pclk_div << PERI_PCLK_DIV_SHIFT) |
+ RK_CLRSETBITS(PERI_HCLK_DIV_MSK,
+ hclk_div << PERI_HCLK_DIV_SHIFT) |
+ RK_CLRSETBITS(PERI_ACLK_DIV_MSK,
+ aclk_div << PERI_ACLK_DIV_SHIFT));
/* PLL enter normal-mode */
write32(&cru_ptr->cru_mode_con,
- RK_CLRSETBITS(GPLL_MODE_MSK, GPLL_MODE_NORM) | RK_CLRSETBITS(CPLL_MODE_MSK, CPLL_MODE_NORM));
+ RK_CLRSETBITS(GPLL_MODE_MSK, GPLL_MODE_NORM) |
+ RK_CLRSETBITS(CPLL_MODE_MSK, CPLL_MODE_NORM));
}
@@ -336,15 +350,19 @@ void rkclk_configure_cpu(void)
* core clock select apll, apll clk = 1800MHz
* arm clk = 1800MHz, mpclk = 450MHz, m0clk = 900MHz
*/
- write32(&cru_ptr->cru_clksel_con[0],
- RK_CLRBITS(CORE_SEL_PLL_MSK) | RK_CLRSETBITS(A12_DIV_MSK, 0 << A12_DIV_SHIFT) | RK_CLRSETBITS(MP_DIV_MSK, 3 << MP_DIV_SHIFT) | RK_CLRSETBITS(M0_DIV_MSK, 1 << 0));
+ write32(&cru_ptr->cru_clksel_con[0], RK_CLRBITS(CORE_SEL_PLL_MSK) |
+ RK_CLRSETBITS(A12_DIV_MSK, 0 << A12_DIV_SHIFT) |
+ RK_CLRSETBITS(MP_DIV_MSK, 3 << MP_DIV_SHIFT) |
+ RK_CLRSETBITS(M0_DIV_MSK, 1 << 0));
/*
* set up dependent divisors for L2RAM/ATCLK and PCLK clocks.
* l2ramclk = 900MHz, atclk = 450MHz, pclk_dbg = 450MHz
*/
write32(&cru_ptr->cru_clksel_con[37],
- RK_CLRSETBITS(L2_DIV_MSK, 1 << 0) | RK_CLRSETBITS(ATCLK_DIV_MSK, (3 << ATCLK_DIV_SHIFT)) | RK_CLRSETBITS(PCLK_DBG_DIV_MSK, (3 << PCLK_DBG_DIV_SHIFT)));
+ RK_CLRSETBITS(L2_DIV_MSK, 1 << 0) |
+ RK_CLRSETBITS(ATCLK_DIV_MSK, (3 << ATCLK_DIV_SHIFT)) |
+ RK_CLRSETBITS(PCLK_DBG_DIV_MSK, (3 << PCLK_DBG_DIV_SHIFT)));
/* PLL enter normal-mode */
write32(&cru_ptr->cru_mode_con,
@@ -399,7 +417,12 @@ void rkclk_ddr_reset(u32 ch, u32 ctl, u32 phy)
u32 phy_srstn_shift = 5 * ch;
write32(&cru_ptr->cru_softrst_con[10],
- RK_CLRSETBITS(1 << phy_ctl_srstn_shift, phy << phy_ctl_srstn_shift) | RK_CLRSETBITS(1 << ctl_psrstn_shift, ctl << ctl_psrstn_shift) | RK_CLRSETBITS(1 << ctl_srstn_shift, ctl << ctl_srstn_shift) | RK_CLRSETBITS(1 << phy_psrstn_shift, phy << phy_psrstn_shift) | RK_CLRSETBITS(1 << phy_srstn_shift, phy << phy_srstn_shift));
+ RK_CLRSETBITS(1 << phy_ctl_srstn_shift,
+ phy << phy_ctl_srstn_shift) |
+ RK_CLRSETBITS(1 << ctl_psrstn_shift, ctl << ctl_psrstn_shift) |
+ RK_CLRSETBITS(1 << ctl_srstn_shift, ctl << ctl_srstn_shift) |
+ RK_CLRSETBITS(1 << phy_psrstn_shift, phy << phy_psrstn_shift) |
+ RK_CLRSETBITS(1 << phy_srstn_shift, phy << phy_srstn_shift));
}
void rkclk_ddr_phy_ctl_reset(u32 ch, u32 n)
@@ -407,7 +430,8 @@ void rkclk_ddr_phy_ctl_reset(u32 ch, u32 n)
u32 phy_ctl_srstn_shift = 4 + 5 * ch;
write32(&cru_ptr->cru_softrst_con[10],
- RK_CLRSETBITS(1 << phy_ctl_srstn_shift, n << phy_ctl_srstn_shift));
+ RK_CLRSETBITS(1 << phy_ctl_srstn_shift,
+ n << phy_ctl_srstn_shift));
}
void rkclk_configure_spi(unsigned int bus, unsigned int hz)
@@ -419,15 +443,18 @@ void rkclk_configure_spi(unsigned int bus, unsigned int hz)
switch (bus) { /*select gpll as spi src clk, and set div*/
case 0:
write32(&cru_ptr->cru_clksel_con[25],
- RK_CLRSETBITS(1 << 7 | 0x1f << 0, 1 << 7 | (src_clk_div - 1) << 0));
+ RK_CLRSETBITS(1 << 7 | 0x1f << 0,
+ 1 << 7 | (src_clk_div - 1) << 0));
break;
case 1:
write32(&cru_ptr->cru_clksel_con[25],
- RK_CLRSETBITS(1 << 15 | 0x1f << 8, 1 << 15 | (src_clk_div - 1) << 8));
+ RK_CLRSETBITS(1 << 15 | 0x1f << 8,
+ 1 << 15 | (src_clk_div - 1) << 8));
break;
case 2:
write32(&cru_ptr->cru_clksel_con[39],
- RK_CLRSETBITS(1 << 7 | 0x1f << 0, 1 << 7 | (src_clk_div - 1) << 0));
+ RK_CLRSETBITS(1 << 7 | 0x1f << 0,
+ 1 << 7 | (src_clk_div - 1) << 0));
break;
default:
printk(BIOS_ERR, "do not support this spi bus\n");
@@ -454,7 +481,8 @@ void rkclk_configure_i2s(unsigned int hz)
i2s0_clk_sel: divider ouput from fraction
i2s0_pll_div_con: 0*/
write32(&cru_ptr->cru_clksel_con[4],
- RK_CLRSETBITS(1 << 15 | 1 << 12 | 3 << 8 | 0x7f << 0, 1 << 15 | 0 << 12 | 1 << 8 | 0 << 0));
+ RK_CLRSETBITS(1 << 15 | 1 << 12 | 3 << 8 | 0x7f << 0,
+ 1 << 15 | 0 << 12 | 1 << 8 | 0 << 0));
/* set frac divider */
v = clk_gcd(GPLL_HZ, hz);
@@ -569,12 +597,14 @@ void rkclk_configure_vop_aclk(u32 vop_id, u32 aclk_hz)
switch (vop_id) {
case 0:
write32(&cru_ptr->cru_clksel_con[31],
- RK_CLRSETBITS(3 << 6 | 0x1f << 0, 0 << 6 | (div - 1) << 0));
+ RK_CLRSETBITS(3 << 6 | 0x1f << 0,
+ 0 << 6 | (div - 1) << 0));
break;
case 1:
write32(&cru_ptr->cru_clksel_con[31],
- RK_CLRSETBITS(3 << 14 | 0x1f << 8, 0 << 14 | (div - 1) << 8));
+ RK_CLRSETBITS(3 << 14 | 0x1f << 8,
+ 0 << 14 | (div - 1) << 8));
break;
}
}
diff --git a/src/soc/rockchip/rk3288/edp.c b/src/soc/rockchip/rk3288/edp.c
index 38e972d7cd..e0590ab97f 100644
--- a/src/soc/rockchip/rk3288/edp.c
+++ b/src/soc/rockchip/rk3288/edp.c
@@ -57,25 +57,27 @@ static void rk_edp_init_refclk(struct rk_edp *edp)
write32(&edp->regs->pll_reg_1, REF_CLK_24M);
/*initial value*/
- write32(&edp->regs->pll_reg_2,
- LDO_OUTPUT_V_SEL_145 | KVCO_DEFALUT | CHG_PUMP_CUR_SEL_5US | V2L_CUR_SEL_1MA);
+ write32(&edp->regs->pll_reg_2, LDO_OUTPUT_V_SEL_145 | KVCO_DEFALUT |
+ CHG_PUMP_CUR_SEL_5US | V2L_CUR_SEL_1MA);
- write32(&edp->regs->pll_reg_3,
- LOCK_DET_CNT_SEL_256 | LOOP_FILTER_RESET | PALL_SSC_RESET | LOCK_DET_BYPASS | PLL_LOCK_DET_MODE | PLL_LOCK_DET_FORCE);
+ write32(&edp->regs->pll_reg_3, LOCK_DET_CNT_SEL_256 |
+ LOOP_FILTER_RESET | PALL_SSC_RESET | LOCK_DET_BYPASS |
+ PLL_LOCK_DET_MODE | PLL_LOCK_DET_FORCE);
- write32(&edp->regs->pll_reg_5,
- REGULATOR_V_SEL_950MV | STANDBY_CUR_SEL | CHG_PUMP_INOUT_CTRL_1200MV | CHG_PUMP_INPUT_CTRL_OP);
+ write32(&edp->regs->pll_reg_5, REGULATOR_V_SEL_950MV | STANDBY_CUR_SEL |
+ CHG_PUMP_INOUT_CTRL_1200MV | CHG_PUMP_INPUT_CTRL_OP);
write32(&edp->regs->ssc_reg, SSC_OFFSET | SSC_MODE | SSC_DEPTH);
- write32(&edp->regs->tx_common,
- TX_SWING_PRE_EMP_MODE | PRE_DRIVER_PW_CTRL1 | LP_MODE_CLK_REGULATOR | RESISTOR_MSB_CTRL | RESISTOR_CTRL);
+ write32(&edp->regs->tx_common, TX_SWING_PRE_EMP_MODE |
+ PRE_DRIVER_PW_CTRL1 | LP_MODE_CLK_REGULATOR |
+ RESISTOR_MSB_CTRL | RESISTOR_CTRL);
- write32(&edp->regs->dp_aux,
- DP_AUX_COMMON_MODE | DP_AUX_EN | AUX_TERM_50OHM);
+ write32(&edp->regs->dp_aux, DP_AUX_COMMON_MODE |
+ DP_AUX_EN | AUX_TERM_50OHM);
- write32(&edp->regs->dp_bias,
- DP_BG_OUT_SEL | DP_DB_CUR_CTRL | DP_BG_SEL | DP_RESISTOR_TUNE_BG);
+ write32(&edp->regs->dp_bias, DP_BG_OUT_SEL | DP_DB_CUR_CTRL |
+ DP_BG_SEL | DP_RESISTOR_TUNE_BG);
write32(&edp->regs->dp_reserv2,
CH1_CH3_SWING_EMP_CTRL | CH0_CH2_SWING_EMP_CTRL);
diff --git a/src/soc/rockchip/rk3288/gpio.c b/src/soc/rockchip/rk3288/gpio.c
index 5fc9c7b185..96b8354087 100644
--- a/src/soc/rockchip/rk3288/gpio.c
+++ b/src/soc/rockchip/rk3288/gpio.c
@@ -53,7 +53,8 @@ static void __gpio_input(gpio_t gpio, u32 pull)
3 << (gpio.idx * 2), pull << (gpio.idx * 2));
else
write32(&rk3288_grf->gpio1_p[(gpio.port - 1)][gpio.bank],
- RK_CLRSETBITS(3 << (gpio.idx * 2), pull << (gpio.idx * 2)));
+ RK_CLRSETBITS(3 << (gpio.idx * 2),
+ pull << (gpio.idx * 2)));
}
void gpio_input(gpio_t gpio)
diff --git a/src/soc/rockchip/rk3288/pwm.c b/src/soc/rockchip/rk3288/pwm.c
index fb47dc8312..9f993f707f 100644
--- a/src/soc/rockchip/rk3288/pwm.c
+++ b/src/soc/rockchip/rk3288/pwm.c
@@ -75,8 +75,9 @@ void pwm_init(u32 id, u32 period_ns, u32 duty_ns)
/*use rk pwm*/
write32(&rk3288_grf->soc_con2, RK_SETBITS(1 << 0));
- write32(&rk3288_pwm->pwm[id].pwm_ctrl,
- PWM_SEL_SRC_CLK | PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_CONTINUOUS | PWM_DUTY_POSTIVE | PWM_INACTIVE_POSTIVE | RK_PWM_DISABLE);
+ write32(&rk3288_pwm->pwm[id].pwm_ctrl, PWM_SEL_SRC_CLK |
+ PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_CONTINUOUS |
+ PWM_DUTY_POSTIVE | PWM_INACTIVE_POSTIVE | RK_PWM_DISABLE);
period = (PD_BUS_PCLK_HZ / 1000) * period_ns / USECS_PER_SEC;
duty = (PD_BUS_PCLK_HZ / 1000) * duty_ns / USECS_PER_SEC;
diff --git a/src/soc/rockchip/rk3288/sdram.c b/src/soc/rockchip/rk3288/sdram.c
index 86acf6dc3f..e7d33ea3a6 100644
--- a/src/soc/rockchip/rk3288/sdram.c
+++ b/src/soc/rockchip/rk3288/sdram.c
@@ -609,12 +609,15 @@ static void pctl_cfg(u32 channel,
sdram_params->pctl_timing.tcl - 1);
write32(&ddr_pctl_regs->dfitphywrlat,
sdram_params->pctl_timing.tcwl);
- write32(&ddr_pctl_regs->mcfg,
- LPDDR2_S4 | MDDR_LPDDR2_CLK_STOP_IDLE(0) | LPDDR2_EN | BURSTLENGTH_CFG(burstlen) | TFAW_CFG(6) | PD_EXIT_FAST | PD_TYPE(1) | PD_IDLE(0));
+ write32(&ddr_pctl_regs->mcfg, LPDDR2_S4 |
+ MDDR_LPDDR2_CLK_STOP_IDLE(0) | LPDDR2_EN |
+ BURSTLENGTH_CFG(burstlen) | TFAW_CFG(6) |
+ PD_EXIT_FAST | PD_TYPE(1) | PD_IDLE(0));
write32(&rk3288_grf->soc_con0, MSCH_MAINDDR3(channel, 0));
- write32(&rk3288_grf->soc_con2,
- PUBL_LPDDR3_EN(channel, 1) | PCTL_BST_DISABLE(channel, 1) | PCTL_LPDDR3_ODT_EN(channel, sdram_params->odt));
+ write32(&rk3288_grf->soc_con2, PUBL_LPDDR3_EN(channel, 1) |
+ PCTL_BST_DISABLE(channel, 1) |
+ PCTL_LPDDR3_ODT_EN(channel, sdram_params->odt));
break;
case DDR3:
@@ -627,11 +630,14 @@ static void pctl_cfg(u32 channel,
write32(&ddr_pctl_regs->dfitphywrlat,
sdram_params->pctl_timing.tcwl - 1);
write32(&ddr_pctl_regs->mcfg,
- MDDR_LPDDR2_CLK_STOP_IDLE(0) | DDR3_EN | DDR2_DDR3_BL_8 | TFAW_CFG(6) | PD_EXIT_SLOW | PD_TYPE(1) | PD_IDLE(0));
+ MDDR_LPDDR2_CLK_STOP_IDLE(0) | DDR3_EN |
+ DDR2_DDR3_BL_8 | TFAW_CFG(6) |
+ PD_EXIT_SLOW | PD_TYPE(1) | PD_IDLE(0));
write32(&rk3288_grf->soc_con0, MSCH_MAINDDR3(channel, 1));
- write32(&rk3288_grf->soc_con2,
- PUBL_LPDDR3_EN(channel, 0) | PCTL_BST_DISABLE(channel, 0) | PCTL_LPDDR3_ODT_EN(channel, 0));
+ write32(&rk3288_grf->soc_con2, PUBL_LPDDR3_EN(channel, 0) |
+ PCTL_BST_DISABLE(channel, 0) |
+ PCTL_LPDDR3_ODT_EN(channel, 0));
break;
}
@@ -656,11 +662,14 @@ static void phy_cfg(u32 channel, const struct rk3288_sdram_params *sdram_params)
write32(&msch_regs->devtodev,
BUSWRTORD(2) | BUSRDTOWR(2) | BUSRDTORD(1));
write32(&ddr_publ_regs->ptr[0],
- PRT_DLLLOCK(div_round_up(sdram_params->ddr_freq / MHz * 5120, 1000)) | PRT_DLLSRST(div_round_up(sdram_params->ddr_freq / MHz * 50, 1000)) | PRT_ITMSRST(8));
+ PRT_DLLLOCK(div_round_up(sdram_params->ddr_freq / MHz * 5120, 1000))
+ | PRT_DLLSRST(div_round_up(sdram_params->ddr_freq / MHz * 50, 1000))
+ | PRT_ITMSRST(8));
write32(&ddr_publ_regs->ptr[1],
- PRT_DINIT0(div_round_up(sdram_params->ddr_freq / MHz * 500000, 1000)) | PRT_DINIT1(div_round_up(sdram_params->ddr_freq / MHz * 400, 1000)));
- write32(&ddr_publ_regs->ptr[2],
- PRT_DINIT2(MIN(dinit2, 0x1ffff)) | PRT_DINIT3(div_round_up(sdram_params->ddr_freq / MHz * 1000, 1000)));
+ PRT_DINIT0(div_round_up(sdram_params->ddr_freq / MHz * 500000, 1000))
+ | PRT_DINIT1(div_round_up(sdram_params->ddr_freq / MHz * 400, 1000)));
+ write32(&ddr_publ_regs->ptr[2], PRT_DINIT2(MIN(dinit2, 0x1ffff))
+ | PRT_DINIT3(div_round_up(sdram_params->ddr_freq / MHz * 1000, 1000)));
switch (sdram_params->dramtype) {
case LPDDR3:
diff --git a/src/soc/rockchip/rk3288/uart.c b/src/soc/rockchip/rk3288/uart.c
index 8ba1fdee73..7710c99760 100644
--- a/src/soc/rockchip/rk3288/uart.c
+++ b/src/soc/rockchip/rk3288/uart.c
@@ -103,8 +103,8 @@ static void rk3288_uart_init(void)
// Hide the divisor latches.
write32(&uart_ptr->lcr, line_config);
// Enable FIFOs, and clear receive and transmit.
- write32(&uart_ptr->fcr,
- UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT);
+ write32(&uart_ptr->fcr, UART8250_FCR_FIFO_EN |
+ UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT);
}
static void rk3288_uart_tx_byte(unsigned char data)
diff --git a/src/soc/rockchip/rk3288/vop.c b/src/soc/rockchip/rk3288/vop.c
index 915d452d4b..81fc41e991 100644
--- a/src/soc/rockchip/rk3288/vop.c
+++ b/src/soc/rockchip/rk3288/vop.c
@@ -51,11 +51,11 @@ void rkvop_enable(u32 vop_id, u32 fbbase, const struct edid *edid)
write32(&preg->win0_act_info,
V_ACT_WIDTH(hactive - 1) | V_ACT_HEIGHT(vactive - 1));
- write32(&preg->win0_dsp_st,
- V_DSP_XST(xpos + hsync_len + hback_porch) | V_DSP_YST(ypos + vsync_len + vback_porch));
+ write32(&preg->win0_dsp_st, V_DSP_XST(xpos + hsync_len + hback_porch) |
+ V_DSP_YST(ypos + vsync_len + vback_porch));
- write32(&preg->win0_dsp_info,
- V_DSP_WIDTH(hactive - 1) | V_DSP_HEIGHT(vactive - 1));
+ write32(&preg->win0_dsp_info, V_DSP_WIDTH(hactive - 1) |
+ V_DSP_HEIGHT(vactive - 1));
clrsetbits_le32(&preg->win0_color_key, M_WIN0_KEY_EN | M_WIN0_KEY_COLOR,
V_WIN0_KEY_EN(0) |
@@ -111,23 +111,27 @@ void rkvop_mode_set(u32 vop_id, const struct edid *edid)
clrsetbits_le32(&preg->sys_ctrl, M_ALL_OUT_EN, V_EDP_OUT_EN(1));
clrsetbits_le32(&preg->dsp_ctrl0, M_DSP_OUT_MODE,
V_DSP_OUT_MODE(15));
- write32(&preg->dsp_htotal_hs_end,
- V_HSYNC(hsync_len) | V_HORPRD(hsync_len + hback_porch + hactive + hfront_porch));
+ write32(&preg->dsp_htotal_hs_end, V_HSYNC(hsync_len) |
+ V_HORPRD(hsync_len + hback_porch + hactive + hfront_porch));
write32(&preg->dsp_hact_st_end,
- V_HEAP(hsync_len + hback_porch + hactive) | V_HASP(hsync_len + hback_porch));
+ V_HEAP(hsync_len + hback_porch + hactive) |
+ V_HASP(hsync_len + hback_porch));
- write32(&preg->dsp_vtotal_vs_end,
- V_VSYNC(vsync_len) | V_VERPRD(vsync_len + vback_porch + vactive + vfront_porch));
+ write32(&preg->dsp_vtotal_vs_end, V_VSYNC(vsync_len) |
+ V_VERPRD(vsync_len + vback_porch + vactive + vfront_porch));
write32(&preg->dsp_vact_st_end,
- V_VAEP(vsync_len + vback_porch + vactive) | V_VASP(vsync_len + vback_porch));
+ V_VAEP(vsync_len + vback_porch + vactive) |
+ V_VASP(vsync_len + vback_porch));
write32(&preg->post_dsp_hact_info,
- V_HEAP(hsync_len + hback_porch + hactive) | V_HASP(hsync_len + hback_porch));
+ V_HEAP(hsync_len + hback_porch + hactive) |
+ V_HASP(hsync_len + hback_porch));
write32(&preg->post_dsp_vact_info,
- V_VAEP(vsync_len + vback_porch + vactive) | V_VASP(vsync_len + vback_porch));
+ V_VAEP(vsync_len + vback_porch + vactive) |
+ V_VASP(vsync_len + vback_porch));
write32(&preg->reg_cfg_done, 0x01); /* enable reg config */
}
diff --git a/src/soc/samsung/exynos5250/clock_init.c b/src/soc/samsung/exynos5250/clock_init.c
index 9cdd729f57..6f9614a0e6 100644
--- a/src/soc/samsung/exynos5250/clock_init.c
+++ b/src/soc/samsung/exynos5250/clock_init.c
@@ -224,8 +224,8 @@ void system_clock_init(struct mem_timings *mem,
;
if (mem->use_bpll) {
- write32(&exynos_clock->src_cdrex,
- MUX_BPLL_SEL_MASK | MUX_MCLK_CDREX_SEL | MUX_MCLK_DPHY_SEL);
+ write32(&exynos_clock->src_cdrex, MUX_BPLL_SEL_MASK |
+ MUX_MCLK_CDREX_SEL | MUX_MCLK_DPHY_SEL);
} else {
write32(&exynos_clock->src_cdrex, CLK_REG_DISABLE);
}
diff --git a/src/soc/samsung/exynos5250/dmc_init_ddr3.c b/src/soc/samsung/exynos5250/dmc_init_ddr3.c
index 5a3cf3ef06..7bdbd6da14 100644
--- a/src/soc/samsung/exynos5250/dmc_init_ddr3.c
+++ b/src/soc/samsung/exynos5250/dmc_init_ddr3.c
@@ -86,8 +86,9 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
write32(&exynos_phy0_control->phy_con14, mem->phy0_pulld_dqs);
write32(&exynos_phy1_control->phy_con14, mem->phy1_pulld_dqs);
- write32(&exynos_dmc->concontrol,
- mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT));
+ write32(&exynos_dmc->concontrol, mem->concontrol |
+ (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) |
+ (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT));
update_reset_dll(exynos_dmc, DDR_MODE_DDR3);
@@ -137,7 +138,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
/* Power Down mode Configuration */
write32(&exynos_dmc->pwrdnconfig,
- mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT | mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT);
+ mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT |
+ mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT);
/* TimingRow, TimingData, TimingPower and Timingaref
* values as per Memory AC parameters
@@ -243,7 +245,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
write32(&exynos_dmc->memcontrol, mem->memcontrol);
/* Set DMC Concontrol and enable auto-refresh counter */
- write32(&exynos_dmc->concontrol,
- mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT));
+ write32(&exynos_dmc->concontrol, mem->concontrol |
+ (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) |
+ (mem->aref_en << CONCONTROL_AREF_EN_SHIFT));
return 0;
}
diff --git a/src/soc/samsung/exynos5250/usb.c b/src/soc/samsung/exynos5250/usb.c
index 3f6833657b..2dca58e553 100644
--- a/src/soc/samsung/exynos5250/usb.c
+++ b/src/soc/samsung/exynos5250/usb.c
@@ -52,12 +52,22 @@ static void setup_dwc3(struct exynos5_usb_drd_dwc3 *dwc3)
/* Set relevant registers to default values (clearing all reset bits) */
write32(&dwc3->usb3pipectl,
- 0x1 << 24 | 0x4 << 19 | 0x1 << 18 | 0x1 << 17 | 0x1 << 1 | 0);
+ 0x1 << 24 | /* activate PHY low power states */
+ 0x4 << 19 | /* low power delay value */
+ 0x1 << 18 | /* activate PHY low power delay */
+ 0x1 << 17 | /* enable SuperSpeed PHY suspend */
+ 0x1 << 1); /* default Tx deemphasis value */
/* Configure PHY clock turnaround for 8-bit UTMI+, disable suspend */
- write32(&dwc3->usb2phycfg, 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0);
-
- write32(&dwc3->ctl, 0x5dc << 19 | 0x1 << 16 | 0x1 << 12 | 0);
+ write32(&dwc3->usb2phycfg,
+ 0x9 << 10 | /* PHY clock turnaround for 8-bit UTMI+ */
+ 0x1 << 8 | /* enable PHY sleep in L1 */
+ 0x1 << 6); /* enable PHY suspend */
+
+ write32(&dwc3->ctl,
+ 0x5dc << 19 | /* suspend clock scale for 24MHz */
+ 0x1 << 16 | /* retry SS three times (bugfix from U-Boot) */
+ 0x1 << 12); /* port capability HOST */
}
void setup_usb_drd_dwc3()
@@ -77,13 +87,32 @@ static void setup_drd_phy(struct exynos5_usb_drd_phy *phy)
write32(&phy->utmi, 1 << 6);
write32(&phy->clkrst,
- 0x88 << 23 | 0x1 << 20 | 0x1 << 19 | 0x68 << 11 | 0x5 << 5 | 0x1 << 4 | 0x3 << 2 | 0x1 << 1 | 0x1 << 0 | 0);
+ 0x88 << 23 | /* spread spectrum refclk selector */
+ 0x1 << 20 | /* enable spread spectrum */
+ 0x1 << 19 | /* enable prescaler refclk */
+ 0x68 << 11 | /* multiplier for 24MHz refclk */
+ 0x5 << 5 | /* select 24MHz refclk (weird, from U-Boot) */
+ 0x1 << 4 | /* power supply in normal operating mode */
+ 0x3 << 2 | /* use external refclk (undocumented on 5420?)*/
+ 0x1 << 1 | /* force port reset */
+ 0x1 << 0); /* normal operating mode */
write32(&phy->param0,
- 0x9 << 26 | 0x3 << 22 | 0x1 << 20 | 0x1 << 18 | 0x3 << 13 | 0x3 << 9 | 0x3 << 6 | 0x4 << 3 | 0x4 << 0 | 0);
+ 0x9 << 26 | /* LOS level */
+ 0x3 << 22 | /* TX VREF tune */
+ 0x1 << 20 | /* TX rise tune */
+ 0x1 << 18 | /* TX res tune */
+ 0x3 << 13 | /* TX HS X Vtune */
+ 0x3 << 9 | /* TX FS/LS tune */
+ 0x3 << 6 | /* SQRX tune */
+ 0x4 << 3 | /* OTG tune */
+ 0x4 << 0); /* comp disc tune */
write32(&phy->param1,
- 0x7f << 19 | 0x7f << 12 | 0x20 << 6 | 0x1c << 0 | 0);
+ 0x7f << 19 | /* reserved */
+ 0x7f << 12 | /* Tx launch amplitude */
+ 0x20 << 6 | /* Tx deemphasis 6dB */
+ 0x1c << 0); /* Tx deemphasis 3.5dB (value from U-Boot) */
/* disable all test features */
write32(&phy->test, 0);
diff --git a/src/soc/samsung/exynos5420/dmc_init_ddr3.c b/src/soc/samsung/exynos5420/dmc_init_ddr3.c
index 6972618ac3..5eeb07b016 100644
--- a/src/soc/samsung/exynos5420/dmc_init_ddr3.c
+++ b/src/soc/samsung/exynos5420/dmc_init_ddr3.c
@@ -111,10 +111,12 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
write32(&exynos_drex0->phycontrol0, val);
write32(&exynos_drex1->phycontrol0, val);
- write32(&exynos_drex0->concontrol,
- mem->concontrol | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT));
- write32(&exynos_drex1->concontrol,
- mem->concontrol | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT));
+ write32(&exynos_drex0->concontrol, mem->concontrol |
+ (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
+ (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT));
+ write32(&exynos_drex1->concontrol, mem->concontrol |
+ (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
+ (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT));
do {
val = read32(&exynos_drex0->phystatus);
@@ -198,9 +200,11 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
for (i = 0; i < 128; i++) {
for (chip = 0; chip < mem->chips_to_configure; chip++) {
write32(&exynos_drex0->directcmd,
- DIRECT_CMD_REFA | (chip << DIRECT_CMD_CHIP_SHIFT));
+ DIRECT_CMD_REFA |
+ (chip << DIRECT_CMD_CHIP_SHIFT));
write32(&exynos_drex1->directcmd,
- DIRECT_CMD_REFA | (chip << DIRECT_CMD_CHIP_SHIFT));
+ DIRECT_CMD_REFA |
+ (chip << DIRECT_CMD_CHIP_SHIFT));
}
}
}
@@ -324,10 +328,14 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
* read data fetch cycles and enable DREX auto set powerdown
* for input buffer of I/O in none read memory state.
*/
- write32(&exynos_drex0->concontrol,
- mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | DMC_CONCONTROL_IO_PD_CON(0x2));
- write32(&exynos_drex1->concontrol,
- mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | DMC_CONCONTROL_IO_PD_CON(0x2));
+ write32(&exynos_drex0->concontrol, mem->concontrol |
+ (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
+ (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) |
+ DMC_CONCONTROL_IO_PD_CON(0x2));
+ write32(&exynos_drex1->concontrol, mem->concontrol |
+ (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
+ (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) |
+ DMC_CONCONTROL_IO_PD_CON(0x2));
/* Enable Clock Gating Control for DMC
* this saves around 25 mw dmc power as compared to the power
diff --git a/src/soc/samsung/exynos5420/usb.c b/src/soc/samsung/exynos5420/usb.c
index 9313fea147..c7862232c6 100644
--- a/src/soc/samsung/exynos5420/usb.c
+++ b/src/soc/samsung/exynos5420/usb.c
@@ -58,12 +58,22 @@ static void setup_dwc3(struct exynos5_usb_drd_dwc3 *dwc3)
/* Set relevant registers to default values (clearing all reset bits) */
write32(&dwc3->usb3pipectl,
- 0x1 << 24 | 0x4 << 19 | 0x1 << 18 | 0x1 << 17 | 0x1 << 1 | 0);
+ 0x1 << 24 | /* activate PHY low power states */
+ 0x4 << 19 | /* low power delay value */
+ 0x1 << 18 | /* activate PHY low power delay */
+ 0x1 << 17 | /* enable SuperSpeed PHY suspend */
+ 0x1 << 1); /* default Tx deemphasis value */
/* Configure PHY clock turnaround for 8-bit UTMI+, disable suspend */
- write32(&dwc3->usb2phycfg, 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0);
-
- write32(&dwc3->ctl, 0x5dc << 19 | 0x1 << 16 | 0x1 << 12 | 0);
+ write32(&dwc3->usb2phycfg,
+ 0x9 << 10 | /* PHY clock turnaround for 8-bit UTMI+ */
+ 0x1 << 8 | /* enable PHY sleep in L1 */
+ 0x1 << 6); /* enable PHY suspend */
+
+ write32(&dwc3->ctl,
+ 0x5dc << 19 | /* suspend clock scale for 24MHz */
+ 0x1 << 16 | /* retry SS three times (bugfix from U-Boot) */
+ 0x1 << 12); /* port capability HOST */
}
void setup_usb_drd0_dwc3()
@@ -89,13 +99,32 @@ static void setup_drd_phy(struct exynos5_usb_drd_phy *phy)
write32(&phy->utmi, 1 << 6);
write32(&phy->clkrst,
- 0x88 << 23 | 0x1 << 20 | 0x1 << 19 | 0x68 << 11 | 0x5 << 5 | 0x1 << 4 | 0x3 << 2 | 0x1 << 1 | 0x1 << 0 | 0);
+ 0x88 << 23 | /* spread spectrum refclk selector */
+ 0x1 << 20 | /* enable spread spectrum */
+ 0x1 << 19 | /* enable prescaler refclk */
+ 0x68 << 11 | /* multiplier for 24MHz refclk */
+ 0x5 << 5 | /* select 24MHz refclk (weird, from U-Boot) */
+ 0x1 << 4 | /* power supply in normal operating mode */
+ 0x3 << 2 | /* use external refclk (undocumented on 5420?)*/
+ 0x1 << 1 | /* force port reset */
+ 0x1 << 0); /* normal operating mode */
write32(&phy->param0,
- 0x9 << 26 | 0x3 << 22 | 0x1 << 20 | 0x1 << 18 | 0x3 << 13 | 0x3 << 9 | 0x3 << 6 | 0x4 << 3 | 0x4 << 0 | 0);
+ 0x9 << 26 | /* LOS level */
+ 0x3 << 22 | /* TX VREF tune */
+ 0x1 << 20 | /* TX rise tune */
+ 0x1 << 18 | /* TX res tune */
+ 0x3 << 13 | /* TX HS X Vtune */
+ 0x3 << 9 | /* TX FS/LS tune */
+ 0x3 << 6 | /* SQRX tune */
+ 0x4 << 3 | /* OTG tune */
+ 0x4 << 0); /* comp disc tune */
write32(&phy->param1,
- 0x7f << 19 | 0x7f << 12 | 0x20 << 6 | 0x1c << 0 | 0);
+ 0x7f << 19 | /* reserved */
+ 0x7f << 12 | /* Tx launch amplitude */
+ 0x20 << 6 | /* Tx deemphasis 6dB */
+ 0x1c << 0); /* Tx deemphasis 3.5dB (value from U-Boot) */
/* disable all test features */
write32(&phy->test, 0);