summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/amd/bettong/boardid.c9
-rw-r--r--src/mainboard/amd/db-ft3b-lc/romstage.c8
-rw-r--r--src/mainboard/amd/inagua/BiosCallOuts.c180
-rw-r--r--src/mainboard/amd/inagua/mainboard.c12
-rw-r--r--src/mainboard/amd/lamar/romstage.c22
-rw-r--r--src/mainboard/amd/olivehill/romstage.c7
-rw-r--r--src/mainboard/amd/olivehillplus/romstage.c7
-rw-r--r--src/mainboard/amd/persimmon/BiosCallOuts.c7
-rw-r--r--src/mainboard/amd/persimmon/mainboard.c11
-rw-r--r--src/mainboard/amd/south_station/BiosCallOuts.c280
-rw-r--r--src/mainboard/amd/south_station/mainboard.c20
-rw-r--r--src/mainboard/amd/thatcher/romstage.c7
-rw-r--r--src/mainboard/amd/union_station/BiosCallOuts.c280
-rw-r--r--src/mainboard/asrock/e350m1/BiosCallOuts.c148
-rw-r--r--src/mainboard/asrock/e350m1/mainboard.c14
-rw-r--r--src/mainboard/asrock/imb-a180/bootblock.c10
-rw-r--r--src/mainboard/asus/am1i-a/bootblock.c2
-rw-r--r--src/mainboard/asus/f2a85-m/bootblock.c4
-rw-r--r--src/mainboard/asus/f2a85-m/romstage.c6
-rw-r--r--src/mainboard/bap/ode_e20XX/romstage.c4
-rw-r--r--src/mainboard/bap/ode_e21XX/romstage.c7
-rw-r--r--src/mainboard/biostar/a68n_5200/romstage.c6
-rw-r--r--src/mainboard/biostar/am1ml/bootblock.c10
-rw-r--r--src/mainboard/elmex/pcm205400/BiosCallOuts.c7
-rw-r--r--src/mainboard/elmex/pcm205400/mainboard.c11
-rw-r--r--src/mainboard/gizmosphere/gizmo/mainboard.c15
-rw-r--r--src/mainboard/gizmosphere/gizmo2/romstage.c19
-rw-r--r--src/mainboard/hp/abm/romstage.c28
-rw-r--r--src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c7
-rw-r--r--src/mainboard/jetway/nf81-t56n-lf/mainboard.c11
-rw-r--r--src/mainboard/lippert/frontrunner-af/mainboard.c68
-rw-r--r--src/mainboard/lippert/toucan-af/mainboard.c85
-rw-r--r--src/mainboard/pcengines/apu1/gpio_ftns.c16
-rw-r--r--src/mainboard/pcengines/apu1/gpio_ftns.h4
-rw-r--r--src/mainboard/pcengines/apu1/mainboard.c19
-rw-r--r--src/mainboard/pcengines/apu2/gpio_ftns.c56
-rw-r--r--src/mainboard/pcengines/apu2/gpio_ftns.h2
37 files changed, 663 insertions, 746 deletions
diff --git a/src/mainboard/amd/bettong/boardid.c b/src/mainboard/amd/bettong/boardid.c
index a3c568f820..21d0476204 100644
--- a/src/mainboard/amd/bettong/boardid.c
+++ b/src/mainboard/amd/bettong/boardid.c
@@ -14,6 +14,7 @@
*/
#include <stdint.h>
+#include <amdblocks/acpimmio.h>
#include <device/mmio.h>
#include <southbridge/amd/common/amd_defs.h>
#include <boardid.h>
@@ -30,17 +31,15 @@
*/
uint32_t board_id(void)
{
- void *gpiommioaddr;
u8 value = 0;
u8 boardrev = 0;
char boardid;
- gpiommioaddr = (void *)AMD_SB_ACPI_MMIO_ADDR + 0x1500;
- value = read8(gpiommioaddr + (7 << 2) + 2); /* agpio7: board_id2 */
+ value = gpio0_read8((7 << 2) + 2); /* agpio7: board_id2 */
boardrev = value & 1;
- value = read8(gpiommioaddr + (6 << 2) + 2); /* agpio6: board_id1 */
+ value = gpio0_read8((6 << 2) + 2); /* agpio6: board_id1 */
boardrev |= (value & 1) << 1;
- value = read8(gpiommioaddr + (5 << 2) + 2); /* agpio5: board_id0 */
+ value = gpio0_read8((5 << 2) + 2); /* agpio5: board_id0 */
boardrev |= (value & 1) << 2;
boardid = 'A' + boardrev;
diff --git a/src/mainboard/amd/db-ft3b-lc/romstage.c b/src/mainboard/amd/db-ft3b-lc/romstage.c
index a3ad3a16e9..77250c2259 100644
--- a/src/mainboard/amd/db-ft3b-lc/romstage.c
+++ b/src/mainboard/amd/db-ft3b-lc/romstage.c
@@ -14,6 +14,7 @@
*/
#include <stdint.h>
+#include <amdblocks/acpimmio.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <arch/cpu.h>
@@ -34,8 +35,7 @@ static void romstage_main_template(void)
* the SoC BKDGs. Without this setting, there is no serial
* output.
*/
- outb(0xD2, 0xcd6);
- outb(0x00, 0xcd7);
+ pm_io_write8(0xd2, 0);
if (!cpu_init_detectedx && boot_cpu()) {
post_code(0x30);
@@ -47,7 +47,5 @@ static void romstage_main_template(void)
void agesa_postcar(struct sysinfo *cb)
{
- /* After AMD_INIT_ENV -> move to ramstage ? */
- outb(0xEA, 0xCD6);
- outb(0x1, 0xcd7);
+ pm_io_write8(0xea, 1);
}
diff --git a/src/mainboard/amd/inagua/BiosCallOuts.c b/src/mainboard/amd/inagua/BiosCallOuts.c
index b6267a69bb..0ae9f28f98 100644
--- a/src/mainboard/amd/inagua/BiosCallOuts.c
+++ b/src/mainboard/amd/inagua/BiosCallOuts.c
@@ -15,6 +15,7 @@
#include <AGESA.h>
#include <amdlib.h>
+#include <amdblocks/acpimmio.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include <SB800.h>
#include <southbridge/amd/cimx/sb800/gpio_oem.h>
@@ -46,76 +47,68 @@ static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigP
UINT32 AcpiMmioAddr;
UINT32 GpioMmioAddr;
UINT8 Data8;
- UINT16 Data16;
UINT8 TempData8;
FcnData = Data;
MemData = ConfigPtr;
Status = AGESA_SUCCESS;
- /* Get SB MMIO Base (AcpiMmioAddr) */
- WriteIo8 (0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16 = Data8 << 8;
- WriteIo8 (0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16 |= Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
+ AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR;
GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
TempData8 &= 0x03;
TempData8 |= Data8;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
Data8 |= BIT2+BIT3;
Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
TempData8 &= 0x23;
TempData8 |= Data8;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
TempData8 &= 0x03;
TempData8 |= Data8;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
Data8 |= BIT2+BIT3;
Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
TempData8 &= 0x23;
TempData8 |= Data8;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
switch (MemData->ParameterListPtr->DDR3Voltage) {
- case VOLT1_35:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_25:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_5:
- default:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ case VOLT1_35:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 |= (UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ break;
+ case VOLT1_25:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ break;
+ case VOLT1_5:
+ default:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 |= (UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
}
return Status;
}
@@ -130,70 +123,67 @@ static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *Confi
UINT32 GpioMmioAddr;
UINT32 AcpiMmioAddr;
UINT8 Data8;
- UINT16 Data16;
FcnData = Data;
ResetInfo = ConfigPtr;
- // Get SB800 MMIO Base (AcpiMmioAddr)
- WriteIo8(0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16 = Data8 << 8;
- WriteIo8(0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16 |= Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- Status = AGESA_UNSUPPORTED;
+ AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR;
GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
- switch (ResetInfo->ResetId)
- {
- case 4:
- switch (ResetInfo->ResetControl) {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 |= BIT6;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- }
+ Status = AGESA_UNSUPPORTED;
+ switch (ResetInfo->ResetId) {
+ case 4:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
+ Data8 &= ~(UINT8)BIT6;
+ /* MXM_GPIO0. GPIO21 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
+ Data8 |= BIT6;
+ /* MXM_GPIO0. GPIO21 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8);
+ Status = AGESA_SUCCESS;
break;
- case 6:
- switch (ResetInfo->ResetControl) {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 |= BIT6;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- }
+ }
+ break;
+ case 6:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
+ Data8 &= ~(UINT8)BIT6;
+ /* PCIE_RST#_LAN, GPIO25 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8);
+ Status = AGESA_SUCCESS;
break;
- case 7:
- switch (ResetInfo->ResetControl) {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
- Data8 |= BIT6;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- }
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
+ Data8 |= BIT6;
+ /* PCIE_RST#_LAN, GPIO25 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8);
+ Status = AGESA_SUCCESS;
break;
+ }
+ break;
+ case 7:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
+ Data8 &= ~(UINT8)BIT6;
+ /* MPCIE_RST0, GPIO02 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
+ Data8 |= BIT6;
+ /* MPCIE_RST0, GPIO02 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
}
- return Status;
+ return Status;
}
diff --git a/src/mainboard/amd/inagua/mainboard.c b/src/mainboard/amd/inagua/mainboard.c
index 83fe394be7..47a267b323 100644
--- a/src/mainboard/amd/inagua/mainboard.c
+++ b/src/mainboard/amd/inagua/mainboard.c
@@ -16,7 +16,6 @@
#include <amdblocks/acpimmio.h>
#include <console/console.h>
#include <device/device.h>
-#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> /* Platform Specific Definitions */
static void init_gpios(void)
{
@@ -34,16 +33,15 @@ static void init_gpios(void)
/* Multi-function pins switch to GPIO0-35, these pins are shared with
* PCI pins, make sure Hudson PCI device is disabled.
*/
- RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 1);
+ pm_write8(0xea, (pm_read8(0xea) & 0xfe) | 1);
/* select IOMux to function1/2, corresponds to GPIO */
- RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG32, AccWidthUint8, ~(BIT0 | BIT1), 1);
- RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG50, AccWidthUint8, ~(BIT0 | BIT1), 2);
-
+ iomux_write8(0x32, (iomux_read8(0x32) & 0xfc) | 1);
+ iomux_write8(0x50, (iomux_read8(0x50) & 0xfc) | 2);
/* output low */
- RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG32, AccWidthUint8, ~(0xFF), 0x48);
- RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG50, AccWidthUint8, ~(0xFF), 0x48);
+ gpio_100_write8(0x20, 0x48);
+ gpio_100_write8(0x32, 0x48);
}
diff --git a/src/mainboard/amd/lamar/romstage.c b/src/mainboard/amd/lamar/romstage.c
index a22b247f27..66188bdc1c 100644
--- a/src/mainboard/amd/lamar/romstage.c
+++ b/src/mainboard/amd/lamar/romstage.c
@@ -14,6 +14,7 @@
*/
#include <stdint.h>
+#include <amdblocks/acpimmio.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <arch/cpu.h>
@@ -28,25 +29,8 @@
static void romstage_main_template(void)
{
- u32 val;
-
- /*
- * In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
- * LpcClk[1:0]". This following register setting has been
- * replicated in every reference design since Parmer, so it is
- * believed to be required even though it is not documented in
- * the SoC BKDGs. Without this setting, there is no serial
- * output.
- */
- outb(0xD2, 0xcd6);
- outb(0x00, 0xcd7);
-
- hudson_lpc_decode();
-
- outb(0x24, 0xCD6);
- outb(0x01, 0xCD7);
- *(volatile u32 *) (AMD_SB_ACPI_MMIO_ADDR + 0xE00 + 0x28) |= 1 << 18; /* 24Mhz */
- *(volatile u32 *) (AMD_SB_ACPI_MMIO_ADDR + 0xE00 + 0x40) &= ~(1 << 2); /* 24Mhz */
+ misc_write32(0x28, misc_read32(0x28) | (1 << 18)); /* 24Mhz */
+ misc_write32(0x40, misc_read32(0x40) & (~(1 << 2))); /* 24Mhz */
if (!cpu_init_detectedx) {
post_code(0x30);
diff --git a/src/mainboard/amd/olivehill/romstage.c b/src/mainboard/amd/olivehill/romstage.c
index 122bb19e3d..dfe7c49f9f 100644
--- a/src/mainboard/amd/olivehill/romstage.c
+++ b/src/mainboard/amd/olivehill/romstage.c
@@ -14,6 +14,7 @@
*/
#include <stdint.h>
+#include <amdblocks/acpimmio.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pci_ops.h>
@@ -30,12 +31,10 @@ void board_BeforeAgesa(struct sysinfo *cb)
* even though the register is not documented in the Kabini BKDG.
* Otherwise the serial output is bad code.
*/
- outb(0xD2, 0xcd6);
- outb(0x00, 0xcd7);
+ pm_io_write8(0xd2, 0);
/* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */
- outb(0xea, 0xcd6);
- outb(0x1, 0xcd7);
+ pm_io_write8(0xea, 1);
/* Set LPC decode enables. */
pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
diff --git a/src/mainboard/amd/olivehillplus/romstage.c b/src/mainboard/amd/olivehillplus/romstage.c
index 3dd7d531eb..4d7db013ee 100644
--- a/src/mainboard/amd/olivehillplus/romstage.c
+++ b/src/mainboard/amd/olivehillplus/romstage.c
@@ -14,6 +14,7 @@
*/
#include <stdint.h>
+#include <amdblocks/acpimmio.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <arch/cpu.h>
@@ -34,8 +35,7 @@ static void romstage_main_template(void)
* the SoC BKDGs. Without this setting, there is no serial
* output.
*/
- outb(0xD2, 0xcd6);
- outb(0x00, 0xcd7);
+ pm_io_write8(0xd2, 0);
if (!cpu_init_detectedx && boot_cpu()) {
post_code(0x30);
@@ -64,6 +64,5 @@ static void romstage_main_template(void)
void agesa_postcar(struct sysinfo *cb)
{
/* After AMD_INIT_ENV -> move to ramstage ? */
- outb(0xEA, 0xCD6);
- outb(0x1, 0xcd7);
+ pm_io_write8(0xea, 1);
}
diff --git a/src/mainboard/amd/persimmon/BiosCallOuts.c b/src/mainboard/amd/persimmon/BiosCallOuts.c
index 60ce3ee3a5..23a0e9f1e6 100644
--- a/src/mainboard/amd/persimmon/BiosCallOuts.c
+++ b/src/mainboard/amd/persimmon/BiosCallOuts.c
@@ -15,6 +15,7 @@
#include <AGESA.h>
#include <amdlib.h>
+#include <amdblocks/acpimmio.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include <SB800.h>
#include <stdlib.h>
@@ -60,11 +61,9 @@ static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *Confi
FcnData = Data;
ResetInfo = ConfigPtr;
// Get SB800 MMIO Base (AcpiMmioAddr)
- WriteIo8(0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
+ Data8 = pm_io_read8(0x27);
Data16 = Data8 << 8;
- WriteIo8(0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
+ Data8 = pm_io_read8(0x26);
Data16 |= Data8;
AcpiMmioAddr = (UINT32)Data16 << 16;
Status = AGESA_UNSUPPORTED;
diff --git a/src/mainboard/amd/persimmon/mainboard.c b/src/mainboard/amd/persimmon/mainboard.c
index 0e89ffde05..6ca8a80771 100644
--- a/src/mainboard/amd/persimmon/mainboard.c
+++ b/src/mainboard/amd/persimmon/mainboard.c
@@ -126,12 +126,11 @@ static void mainboard_enable(struct device *dev)
/* enable GPP CLK0 thru CLK1 */
/* disable GPP CLK2 thru SLT_GFX_CLK */
- u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
- write8(misc_mem_clk_cntrl + 0, 0xFF);
- write8(misc_mem_clk_cntrl + 1, 0x00);
- write8(misc_mem_clk_cntrl + 2, 0x00);
- write8(misc_mem_clk_cntrl + 3, 0x00);
- write8(misc_mem_clk_cntrl + 4, 0x00);
+ misc_write8(0, 0xff);
+ misc_write8(1, 0);
+ misc_write8(2, 0);
+ misc_write8(3, 0);
+ misc_write8(4, 0);
/*
* Initialize ASF registers to an arbitrary address because someone
diff --git a/src/mainboard/amd/south_station/BiosCallOuts.c b/src/mainboard/amd/south_station/BiosCallOuts.c
index ecb7e1cfd6..45a40b497b 100644
--- a/src/mainboard/amd/south_station/BiosCallOuts.c
+++ b/src/mainboard/amd/south_station/BiosCallOuts.c
@@ -15,6 +15,7 @@
#include <AGESA.h>
#include <amdlib.h>
+#include <amdblocks/acpimmio.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include <SB800.h>
#include <southbridge/amd/cimx/sb800/gpio_oem.h>
@@ -37,166 +38,151 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] =
};
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
-/* Call the host environment interface to provide a user hook opportunity. */
+/* Call the host environment interface to provide a user hook opportunity. */
static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINTN FcnData;
- MEM_DATA_STRUCT *MemData;
- UINT32 AcpiMmioAddr;
- UINT32 GpioMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
- UINT8 TempData8;
+ AGESA_STATUS Status;
+ UINTN FcnData;
+ MEM_DATA_STRUCT *MemData;
+ UINT32 AcpiMmioAddr;
+ UINT32 GpioMmioAddr;
+ UINT8 Data8;
+ UINT8 TempData8;
- FcnData = Data;
- MemData = ConfigPtr;
+ FcnData = Data;
+ MemData = ConfigPtr;
- Status = AGESA_SUCCESS;
- /* Get SB MMIO Base (AcpiMmioAddr) */
- WriteIo8 (0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16 = Data8 << 8;
- WriteIo8 (0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16 |= Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
+ Status = AGESA_SUCCESS;
+ AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR;
+ GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~BIT5;
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ TempData8 &= 0x03;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
+ Data8 |= BIT2+BIT3;
+ Data8 &= ~BIT4;
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ TempData8 &= 0x23;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~BIT5;
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ TempData8 &= 0x03;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
+ Data8 |= BIT2+BIT3;
+ Data8 &= ~BIT4;
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ TempData8 &= 0x23;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
- switch(MemData->ParameterListPtr->DDR3Voltage){
- case VOLT1_35:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_25:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_5:
- default:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- }
- return Status;
+ switch (MemData->ParameterListPtr->DDR3Voltage) {
+ case VOLT1_35:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 |= (UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ break;
+ case VOLT1_25:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ break;
+ case VOLT1_5:
+ default:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 |= (UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ }
+ return Status;
}
/* PCIE slot reset control */
static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINTN FcnData;
- PCIe_SLOT_RESET_INFO *ResetInfo;
+ AGESA_STATUS Status;
+ UINTN FcnData;
+ PCIe_SLOT_RESET_INFO *ResetInfo;
+ UINT32 GpioMmioAddr;
+ UINT32 AcpiMmioAddr;
+ UINT8 Data8;
- UINT32 GpioMmioAddr;
- UINT32 AcpiMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
-
- FcnData = Data;
- ResetInfo = ConfigPtr;
- // Get SB800 MMIO Base (AcpiMmioAddr)
- WriteIo8(0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16 = Data8 << 8;
- WriteIo8(0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16 |= Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- Status = AGESA_UNSUPPORTED;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
- switch (ResetInfo->ResetId)
- {
- case 4:
- switch (ResetInfo->ResetControl)
- {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 |= BIT6;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- case 6:
- switch (ResetInfo->ResetControl)
- {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 |= BIT6;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- case 7:
- switch (ResetInfo->ResetControl)
- {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
- Data8 |= BIT6;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- }
- return Status;
+ FcnData = Data;
+ ResetInfo = ConfigPtr;
+ AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR;
+ GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
+ Status = AGESA_UNSUPPORTED;
+ switch (ResetInfo->ResetId) {
+ case 4:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
+ Data8 &= ~(UINT8)BIT6;
+ /* MXM_GPIO0. GPIO21 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
+ Data8 |= BIT6;
+ /* MXM_GPIO0. GPIO21 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ case 6:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
+ Data8 &= ~(UINT8)BIT6;
+ /* PCIE_RST#_LAN, GPIO25 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
+ Data8 |= BIT6;
+ /* PCIE_RST#_LAN, GPIO25 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ case 7:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
+ Data8 &= ~(UINT8)BIT6;
+ /* MPCIE_RST0, GPIO02 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
+ Data8 |= BIT6;
+ /* MPCIE_RST0, GPIO02 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ }
+ return Status;
}
diff --git a/src/mainboard/amd/south_station/mainboard.c b/src/mainboard/amd/south_station/mainboard.c
index 9b041e0111..d9e4c5ff1a 100644
--- a/src/mainboard/amd/south_station/mainboard.c
+++ b/src/mainboard/amd/south_station/mainboard.c
@@ -17,7 +17,6 @@
#include <console/console.h>
#include <delay.h>
#include <device/device.h>
-#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> /* Platform Specific Definitions */
/**
* Southstation using SB GPIO 17/18 to control the Red/Green LED
@@ -25,26 +24,21 @@
*/
static void southstation_led_init(void)
{
-#define GPIO_FUNCTION 2 //GPIO function
-#define SB_GPIO_REG17 17 //Red Light
-#define SB_GPIO_REG18 18 //Green Light
-
/* multi-function pins switch to GPIO0-35 */
- RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 1);
+ pm_write8(0xea, (pm_read8(0xea) & 0xfe) | 1);
/* select IOMux to function2, corresponds to GPIO */
- RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG17, AccWidthUint8, ~(BIT0 | BIT1), GPIO_FUNCTION);
- RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG18, AccWidthUint8, ~(BIT0 | BIT1), GPIO_FUNCTION);
+ iomux_write8(0x11, (iomux_read8(0x11) & 0xfc) | 2);
+ iomux_write8(0x12, (iomux_read8(0x12) & 0xfc) | 2);
/* Lighting test */
- RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG17, AccWidthUint8, ~(0xFF), 0x08); //output high
- RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG18, AccWidthUint8, ~(0xFF), 0x08);
+ gpio_100_write8(0x11, 0x08); //output high
+ gpio_100_write8(0x12, 0x08);
mdelay(100);
- RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG17, AccWidthUint8, ~(0xFF), 0x48); //output low
- RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG18, AccWidthUint8, ~(0xFF), 0x48);
+ gpio_100_write8(0x11, 0x48); //output low
+ gpio_100_write8(0x12, 0x48);
}
-
/**********************************************
* Enable the dedicated functions of the board.
**********************************************/
diff --git a/src/mainboard/amd/thatcher/romstage.c b/src/mainboard/amd/thatcher/romstage.c
index 0a2821ba60..dff516ca3a 100644
--- a/src/mainboard/amd/thatcher/romstage.c
+++ b/src/mainboard/amd/thatcher/romstage.c
@@ -14,6 +14,7 @@
*/
#include <stdint.h>
+#include <amdblocks/acpimmio.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <console/console.h>
@@ -47,9 +48,7 @@ void board_BeforeAgesa(struct sysinfo *cb)
post_code(0x31);
lpc47n217_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- outb(0x24, 0xcd6);
- outb(0x1, 0xcd7);
- outb(0xea, 0xcd6);
- outb(0x1, 0xcd7);
+ pm_io_write8(0x24, 1);
+ pm_io_write8(0xea, 1);
gpio_100_write8(0x1, 0x98);
}
diff --git a/src/mainboard/amd/union_station/BiosCallOuts.c b/src/mainboard/amd/union_station/BiosCallOuts.c
index ecb7e1cfd6..c701a7e4e2 100644
--- a/src/mainboard/amd/union_station/BiosCallOuts.c
+++ b/src/mainboard/amd/union_station/BiosCallOuts.c
@@ -15,6 +15,7 @@
#include <AGESA.h>
#include <amdlib.h>
+#include <amdblocks/acpimmio.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include <SB800.h>
#include <southbridge/amd/cimx/sb800/gpio_oem.h>
@@ -37,166 +38,151 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] =
};
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
-/* Call the host environment interface to provide a user hook opportunity. */
+/* Call the host environment interface to provide a user hook opportunity. */
static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINTN FcnData;
- MEM_DATA_STRUCT *MemData;
- UINT32 AcpiMmioAddr;
- UINT32 GpioMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
- UINT8 TempData8;
+ AGESA_STATUS Status;
+ UINTN FcnData;
+ MEM_DATA_STRUCT *MemData;
+ UINT32 AcpiMmioAddr;
+ UINT32 GpioMmioAddr;
+ UINT8 Data8;
+ UINT8 TempData8;
- FcnData = Data;
- MemData = ConfigPtr;
+ FcnData = Data;
+ MemData = ConfigPtr;
- Status = AGESA_SUCCESS;
- /* Get SB MMIO Base (AcpiMmioAddr) */
- WriteIo8 (0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16 = Data8 << 8;
- WriteIo8 (0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16 |= Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
+ Status = AGESA_SUCCESS;
+ AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR;
+ GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~BIT5;
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ TempData8 &= 0x03;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
+ Data8 |= BIT2+BIT3;
+ Data8 &= ~BIT4;
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ TempData8 &= 0x23;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~BIT5;
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ TempData8 &= 0x03;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
+ Data8 |= BIT2+BIT3;
+ Data8 &= ~BIT4;
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ TempData8 &= 0x23;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
- switch(MemData->ParameterListPtr->DDR3Voltage){
- case VOLT1_35:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_25:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_5:
- default:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- }
- return Status;
+ switch (MemData->ParameterListPtr->DDR3Voltage) {
+ case VOLT1_35:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 |= (UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ break;
+ case VOLT1_25:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ break;
+ case VOLT1_5:
+ default:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 |= (UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ }
+ return Status;
}
/* PCIE slot reset control */
static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINTN FcnData;
- PCIe_SLOT_RESET_INFO *ResetInfo;
+ AGESA_STATUS Status;
+ UINTN FcnData;
+ PCIe_SLOT_RESET_INFO *ResetInfo;
+ UINT32 GpioMmioAddr;
+ UINT32 AcpiMmioAddr;
+ UINT8 Data8;
- UINT32 GpioMmioAddr;
- UINT32 AcpiMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
-
- FcnData = Data;
- ResetInfo = ConfigPtr;
- // Get SB800 MMIO Base (AcpiMmioAddr)
- WriteIo8(0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16 = Data8 << 8;
- WriteIo8(0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16 |= Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- Status = AGESA_UNSUPPORTED;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
- switch (ResetInfo->ResetId)
- {
- case 4:
- switch (ResetInfo->ResetControl)
- {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 |= BIT6;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- case 6:
- switch (ResetInfo->ResetControl)
- {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 |= BIT6;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- case 7:
- switch (ResetInfo->ResetControl)
- {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
- Data8 |= BIT6;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- }
- return Status;
+ FcnData = Data;
+ ResetInfo = ConfigPtr;
+ AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR;
+ GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
+ Status = AGESA_UNSUPPORTED;
+ switch (ResetInfo->ResetId) {
+ case 4:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
+ Data8 &= ~(UINT8)BIT6;
+ /* MXM_GPIO0. GPIO21 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
+ Data8 |= BIT6;
+ /* MXM_GPIO0. GPIO21 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ case 6:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
+ Data8 &= ~(UINT8)BIT6;
+ /* PCIE_RST#_LAN, GPIO25 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
+ Data8 |= BIT6;
+ /* PCIE_RST#_LAN, GPIO25 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ case 7:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
+ Data8 &= ~(UINT8)BIT6;
+ /* MPCIE_RST0, GPIO02 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
+ Data8 |= BIT6;
+ /* MPCIE_RST0, GPIO02 */
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ }
+ return Status;
}
diff --git a/src/mainboard/asrock/e350m1/BiosCallOuts.c b/src/mainboard/asrock/e350m1/BiosCallOuts.c
index 5d7211c3e6..c9ecad746a 100644
--- a/src/mainboard/asrock/e350m1/BiosCallOuts.c
+++ b/src/mainboard/asrock/e350m1/BiosCallOuts.c
@@ -15,6 +15,7 @@
#include <AGESA.h>
#include <amdlib.h>
+#include <amdblocks/acpimmio.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include <SB800.h>
@@ -34,88 +35,81 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] =
};
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
-/* Call the host environment interface to provide a user hook opportunity. */
+/* Call the host environment interface to provide a user hook opportunity. */
static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINTN FcnData;
- MEM_DATA_STRUCT *MemData;
- UINT32 AcpiMmioAddr;
- UINT32 GpioMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
- UINT8 TempData8;
+ AGESA_STATUS Status;
+ UINTN FcnData;
+ MEM_DATA_STRUCT *MemData;
+ UINT32 AcpiMmioAddr;
+ UINT32 GpioMmioAddr;
+ UINT8 Data8;
+ UINT8 TempData8;
- FcnData = Data;
- MemData = ConfigPtr;
+ FcnData = Data;
+ MemData = ConfigPtr;
- Status = AGESA_SUCCESS;
- /* Get SB800 MMIO Base (AcpiMmioAddr) */
- WriteIo8 (0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16 = Data8 << 8;
- WriteIo8 (0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16 |= Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
+ Status = AGESA_SUCCESS;
+ AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR;
+ GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~BIT5;
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ TempData8 &= 0x03;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
+ Data8 |= BIT2+BIT3;
+ Data8 &= ~BIT4;
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ TempData8 &= 0x23;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~BIT5;
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ TempData8 &= 0x03;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
+ Data8 |= BIT2+BIT3;
+ Data8 &= ~BIT4;
+ TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ TempData8 &= 0x23;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
- /* this seems to be just copy-pasted from the AMD reference boards and needs
- * some investigation
- */
- switch(MemData->ParameterListPtr->DDR3Voltage){
- case VOLT1_35:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_25:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_5:
- default:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- }
- // disable memory clear for boot time reduction
- MemData->ParameterListPtr->EnableMemClr = FALSE;
- return Status;
+ /*
+ * this seems to be just copy-pasted from the AMD reference boards and
+ * needs some investigation
+ */
+ switch (MemData->ParameterListPtr->DDR3Voltage) {
+ case VOLT1_35:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 |= (UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ break;
+ case VOLT1_25:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ break;
+ case VOLT1_5:
+ default:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 |= (UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ }
+ /* disable memory clear for boot time reduction */
+ MemData->ParameterListPtr->EnableMemClr = FALSE;
+ return Status;
}
diff --git a/src/mainboard/asrock/e350m1/mainboard.c b/src/mainboard/asrock/e350m1/mainboard.c
index e2f4f2b259..96744a39bd 100644
--- a/src/mainboard/asrock/e350m1/mainboard.c
+++ b/src/mainboard/asrock/e350m1/mainboard.c
@@ -26,19 +26,17 @@ static void mainboard_enable(struct device *dev)
{
printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
- /* Power off unused clock pins of GPP PCIe devices */
- u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
- /*
+ /* Power off unused clock pins of GPP PCIe devices
* GPP CLK0 connected to unpopulated mini PCIe slot
* GPP CLK1 connected to ethernet chip
*/
- write8(misc_mem_clk_cntrl + 0, 0xFF);
+ misc_write8(0, 0xff);
/* GPP CLK2 connected to the external USB3 controller */
- write8(misc_mem_clk_cntrl + 1, 0x0F);
- write8(misc_mem_clk_cntrl + 2, 0x00);
- write8(misc_mem_clk_cntrl + 3, 0x00);
+ misc_write8(1, 0x0f);
+ misc_write8(2, 0);
+ misc_write8(3, 0);
/* SLT_GFX_CLK connected to PCIe slot */
- write8(misc_mem_clk_cntrl + 4, 0xF0);
+ misc_write8(4, 0xf0);
/*
* Initialize ASF registers to an arbitrary address because someone
diff --git a/src/mainboard/asrock/imb-a180/bootblock.c b/src/mainboard/asrock/imb-a180/bootblock.c
index eb5641ff5e..e87dc21f87 100644
--- a/src/mainboard/asrock/imb-a180/bootblock.c
+++ b/src/mainboard/asrock/imb-a180/bootblock.c
@@ -21,20 +21,14 @@
void bootblock_mainboard_early_init(void)
{
- u32 reg32;
-
/* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */
pm_write8(0xea, 0x1);
/* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */
- reg32 = misc_read32(0x28);
- reg32 &= 0xfff8ffff;
- misc_write32(0x28, reg32);
+ misc_write32(0x28, misc_read32(0x28) & 0xfff8ffff);
/* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */
- reg32 = misc_read32(0x40);
- reg32 &= 0xffffbffb;
- misc_write32(0x40, reg32);
+ misc_write32(0x40, misc_read32(0x40) & 0xffffbffb);
/* w83627uhg has a default clk of 48MHz, p.9 of data-sheet */
winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
diff --git a/src/mainboard/asus/am1i-a/bootblock.c b/src/mainboard/asus/am1i-a/bootblock.c
index ddbf2aa548..2a3aabd7e9 100644
--- a/src/mainboard/asus/am1i-a/bootblock.c
+++ b/src/mainboard/asus/am1i-a/bootblock.c
@@ -113,7 +113,7 @@ static void ite_gpio_conf(pnp_devfn_t dev)
void bootblock_mainboard_early_init(void)
{
- volatile u32 i, val;
+ u32 val, i;
/* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */
pm_write8(0xea, 0x1);
diff --git a/src/mainboard/asus/f2a85-m/bootblock.c b/src/mainboard/asus/f2a85-m/bootblock.c
index 0472877dc0..3d980a663d 100644
--- a/src/mainboard/asus/f2a85-m/bootblock.c
+++ b/src/mainboard/asus/f2a85-m/bootblock.c
@@ -32,9 +32,7 @@ static void sbxxx_enable_48mhzout(void)
reg32 |= 0x00100000;
misc_write32(0x28, reg32);
- reg32 = misc_read32(0x40);
- reg32 &= ~0x80u;
- misc_write32(0x40, reg32);
+ misc_write32(0x40, misc_read32(0x40) & (~0x80u));
}
static void superio_init_m(void)
diff --git a/src/mainboard/asus/f2a85-m/romstage.c b/src/mainboard/asus/f2a85-m/romstage.c
index 3aa29c8ce3..5b7494d9ee 100644
--- a/src/mainboard/asus/f2a85-m/romstage.c
+++ b/src/mainboard/asus/f2a85-m/romstage.c
@@ -14,6 +14,7 @@
* GNU General Public License for more details.
*/
+#include <amdblocks/acpimmio.h>
#include <arch/io.h>
#include <northbridge/amd/agesa/state_machine.h>
#include <southbridge/amd/agesa/hudson/smbus.h>
@@ -26,10 +27,7 @@ void board_BeforeAgesa(struct sysinfo *cb)
post_code(0x30);
/* turn on secondary smbus at b20 */
- outb(0x28, 0xcd6);
- byte = inb(0xcd7);
- byte |= 1;
- outb(byte, 0xcd7);
+ pm_write8(0x28, pm_read8(0x28) | 1);
/* set DDR3 voltage */
byte = CONFIG_BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL;
diff --git a/src/mainboard/bap/ode_e20XX/romstage.c b/src/mainboard/bap/ode_e20XX/romstage.c
index 505de38d9e..c1b96f1273 100644
--- a/src/mainboard/bap/ode_e20XX/romstage.c
+++ b/src/mainboard/bap/ode_e20XX/romstage.c
@@ -16,6 +16,7 @@
*/
#include <arch/io.h>
+#include <amdblocks/acpimmio.h>
#include <device/pci_ops.h>
#include <southbridge/amd/agesa/hudson/hudson.h>
@@ -29,8 +30,7 @@
void board_BeforeAgesa(struct sysinfo *cb)
{
/* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */
- outb(0xea, 0xcd6);
- outb(0x1, 0xcd7);
+ pm_io_write(0xea, 1);
/* Set LPC decode enables. */
pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
diff --git a/src/mainboard/bap/ode_e21XX/romstage.c b/src/mainboard/bap/ode_e21XX/romstage.c
index 9729ffb400..a60e571367 100644
--- a/src/mainboard/bap/ode_e21XX/romstage.c
+++ b/src/mainboard/bap/ode_e21XX/romstage.c
@@ -14,6 +14,7 @@
*/
#include <stdint.h>
+#include <amdblocks/acpimmio.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <arch/cpu.h>
@@ -38,8 +39,7 @@ static void romstage_main_template(void)
* the SoC BKDGs. Without this setting, there is no serial
* output.
*/
- outb(0xD2, 0xcd6);
- outb(0x00, 0xcd7);
+ pm_io_write8(0xd2, 0);
if (!cpu_init_detectedx && boot_cpu()) {
post_code(0x30);
@@ -52,6 +52,5 @@ static void romstage_main_template(void)
void agesa_postcar(struct sysinfo *cb)
{
/* After AMD_INIT_ENV -> move to ramstage ? */
- outb(0xEA, 0xCD6);
- outb(0x1, 0xcd7);
+ pm_io_write8(0xea, 1);
}
diff --git a/src/mainboard/biostar/a68n_5200/romstage.c b/src/mainboard/biostar/a68n_5200/romstage.c
index 09098f7d8b..5e0cd7c83d 100644
--- a/src/mainboard/biostar/a68n_5200/romstage.c
+++ b/src/mainboard/biostar/a68n_5200/romstage.c
@@ -16,6 +16,7 @@
*/
#include <stdint.h>
+#include <amdblocks/acpimmio.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pci_ops.h>
@@ -32,13 +33,11 @@
static void sbxxx_enable_48mhzout(void)
{
/* most likely programming to 48MHz out signal */
- /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */
u32 reg32;
reg32 = misc_read32(0x28);
reg32 &= 0xfff8ffff;
misc_write32(0x28, reg32);
- /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */
reg32 = misc_read32(0x40);
reg32 &= 0xffffbffb;
misc_write32(0x40, reg32);
@@ -49,8 +48,7 @@ void board_BeforeAgesa(struct sysinfo *cb)
u8 byte;
/* Enable the AcpiMmio space */
- outb(0x24, 0xcd6);
- outb(0x1, 0xcd7);
+ pm_io_write8(0x24, 1);
/* Set LPC decode enables. */
pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
diff --git a/src/mainboard/biostar/am1ml/bootblock.c b/src/mainboard/biostar/am1ml/bootblock.c
index 771745e9bd..3eceaa782d 100644
--- a/src/mainboard/biostar/am1ml/bootblock.c
+++ b/src/mainboard/biostar/am1ml/bootblock.c
@@ -61,20 +61,14 @@ static void ite_gpio_conf(pnp_devfn_t dev)
void bootblock_mainboard_early_init(void)
{
- u32 reg32;
-
/* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */
pm_write8(0xea, 0x1);
/* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */
- reg32 = misc_read32(0x28);
- reg32 &= 0xfff8ffff;
- misc_write32(0x28, reg32);
+ misc_write32(0x28, misc_read32(0x28) & 0xfff8ffff);
/* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */
- reg32 = misc_read32(0x40);
- reg32 &= 0xffffbffb;
- misc_write32(0x49, reg32);
+ misc_write32(0x40, misc_read32(0x40) & 0xffffbffb);
/* Configure SIO as made under vendor BIOS */
ite_evc_conf(ENVC_DEV);
diff --git a/src/mainboard/elmex/pcm205400/BiosCallOuts.c b/src/mainboard/elmex/pcm205400/BiosCallOuts.c
index 6e2eaed80d..01f06bd765 100644
--- a/src/mainboard/elmex/pcm205400/BiosCallOuts.c
+++ b/src/mainboard/elmex/pcm205400/BiosCallOuts.c
@@ -15,6 +15,7 @@
#include <AGESA.h>
#include <amdlib.h>
+#include <amdblocks/acpimmio.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include <SB800.h>
#include <stdlib.h>
@@ -60,11 +61,9 @@ static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *Confi
FcnData = Data;
ResetInfo = ConfigPtr;
// Get SB800 MMIO Base (AcpiMmioAddr)
- WriteIo8(0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
+ Data8 = pm_io_read8(0x27);
Data16=Data8<<8;
- WriteIo8(0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
+ Data8 = pm_io_read8(0x26);
Data16|=Data8;
AcpiMmioAddr = (UINT32)Data16 << 16;
Status = AGESA_UNSUPPORTED;
diff --git a/src/mainboard/elmex/pcm205400/mainboard.c b/src/mainboard/elmex/pcm205400/mainboard.c
index 0e89ffde05..6ca8a80771 100644
--- a/src/mainboard/elmex/pcm205400/mainboard.c
+++ b/src/mainboard/elmex/pcm205400/mainboard.c
@@ -126,12 +126,11 @@ static void mainboard_enable(struct device *dev)
/* enable GPP CLK0 thru CLK1 */
/* disable GPP CLK2 thru SLT_GFX_CLK */
- u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
- write8(misc_mem_clk_cntrl + 0, 0xFF);
- write8(misc_mem_clk_cntrl + 1, 0x00);
- write8(misc_mem_clk_cntrl + 2, 0x00);
- write8(misc_mem_clk_cntrl + 3, 0x00);
- write8(misc_mem_clk_cntrl + 4, 0x00);
+ misc_write8(0, 0xff);
+ misc_write8(1, 0);
+ misc_write8(2, 0);
+ misc_write8(3, 0);
+ misc_write8(4, 0);
/*
* Initialize ASF registers to an arbitrary address because someone
diff --git a/src/mainboard/gizmosphere/gizmo/mainboard.c b/src/mainboard/gizmosphere/gizmo/mainboard.c
index b65f56b074..63d94530e9 100644
--- a/src/mainboard/gizmosphere/gizmo/mainboard.c
+++ b/src/mainboard/gizmosphere/gizmo/mainboard.c
@@ -14,12 +14,12 @@
* GNU General Public License for more details.
*/
+#include <amdblocks/acpimmio.h>
#include <device/mmio.h>
#include <console/console.h>
#include <delay.h>
#include <device/device.h>
#include <device/pci_ops.h>
-#include <southbridge/amd/cimx/sb800/SBPLATFORM.h>
/**********************************************
* Enable the dedicated functions of the board.
@@ -30,18 +30,17 @@ static void mainboard_enable(struct device *dev)
/* enable GPP CLK0 thru CLK1 */
/* disable GPP CLK2 thru SLT_GFX_CLK */
- u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
- write8(misc_mem_clk_cntrl + 0, 0xFF);
- write8(misc_mem_clk_cntrl + 1, 0x00);
- write8(misc_mem_clk_cntrl + 2, 0x00);
- write8(misc_mem_clk_cntrl + 3, 0x00);
- write8(misc_mem_clk_cntrl + 4, 0x00);
+ misc_write8(0, 0xFF);
+ misc_write8(1, 0);
+ misc_write8(2, 0);
+ misc_write8(3, 0);
+ misc_write8(4, 0);
/*
* Force the onboard SATA port to GEN2 speed.
* The offboard SATA port can remain at GEN3.
*/
- RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, 0xFB, 0x04);
+ pm_write8(0xda, (pm_read8(0xda) & 0xfb) | 0x04);
}
static void mainboard_final(void *chip_info)
diff --git a/src/mainboard/gizmosphere/gizmo2/romstage.c b/src/mainboard/gizmosphere/gizmo2/romstage.c
index 4676199b47..6312270712 100644
--- a/src/mainboard/gizmosphere/gizmo2/romstage.c
+++ b/src/mainboard/gizmosphere/gizmo2/romstage.c
@@ -13,6 +13,7 @@
* GNU General Public License for more details.
*/
+#include <amdblocks/acpimmio.h>
#include <arch/io.h>
#include <device/pci_ops.h>
#include <northbridge/amd/agesa/state_machine.h>
@@ -29,21 +30,5 @@ void board_BeforeAgesa(struct sysinfo *cb)
* even though the register is not documented in the Kabini BKDG.
* Otherwise the serial output is bad code.
*/
- outb(0xD2, 0xcd6);
- outb(0x00, 0xcd7);
+ pm_io_write8(0xd2, 0);
}
-
-#if 0
- /* LPC clock? Should happen before enable_serial. */
-
- /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */
- int i;
- for(i = 0; i < 200000; i++)
- val = inb(0xcd6);
-#endif
-
-#if 0
- /* Was before copy_and_run. */
- outb(0xEA, 0xCD6);
- outb(0x1, 0xcd7);
-#endif
diff --git a/src/mainboard/hp/abm/romstage.c b/src/mainboard/hp/abm/romstage.c
index 079bd7b786..5092e1772f 100644
--- a/src/mainboard/hp/abm/romstage.c
+++ b/src/mainboard/hp/abm/romstage.c
@@ -14,6 +14,7 @@
* GNU General Public License for more details.
*/
+#include <amdblocks/acpimmio.h>
#include <arch/io.h>
#include <device/pci_ops.h>
#include <northbridge/amd/agesa/state_machine.h>
@@ -26,7 +27,7 @@
void board_BeforeAgesa(struct sysinfo *cb)
{
- u32 reg32;
+ u32 t32;
/* For serial port option, plug-in card on LPC. */
pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
@@ -37,32 +38,21 @@ void board_BeforeAgesa(struct sysinfo *cb)
* even though the register is not documented in the Kabini BKDG.
* Otherwise the serial output is bad code.
*/
- outb(0xD2, 0xcd6);
- outb(0x00, 0xcd7);
-
+ pm_io_write8(0xd2, 0);
/* Enable the AcpiMmio space */
- outb(0x24, 0xcd6);
- outb(0x01, 0xcd7);
+ pm_io_write8(0x24, 1);
/* Set auxiliary output clock frequency on OSCOUT1 pin to be 25MHz */
/* Set auxiliary output clock frequency on OSCOUT2 pin to be 48MHz */
- reg32 = misc_read32(0x28);
- reg32 &= 0xffc0ffff; // Clr bits [21:19] & [18:16]
- reg32 |= 0x00010000; // Set bit 16 for 25MHz
- misc_write32(0x28, reg32);
+ t32 = misc_read32(0x28);
+ t32 &= 0xffc0ffff; // Clr bits [21:19] & [18:16]
+ t32 |= 0x00010000; // Set bit 16 for 25MHz
+ misc_write(0x28, t32);
/* Enable Auxiliary OSCOUT1/OSCOUT2 */
- reg32 = misc_read32(0x40;
- reg32 &= 0xffffff7b; // clear 2, 7
- misc_write32(0x40, reg32);
+ t32 = misc_write32(0x40, misc_read32(0x40) & 0xffffff7b);
nct5104d_enable_uartd(SERIAL_DEV);
nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}
-
-#if 0
- /* Was before copy_and_run. */
- outb(0xEA, 0xCD6);
- outb(0x1, 0xcd7);
-#endif
diff --git a/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c b/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c
index 86999fbab4..c2227ae935 100644
--- a/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c
+++ b/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c
@@ -17,6 +17,7 @@
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include <amdlib.h>
+#include <amdblocks/acpimmio.h>
#include <vendorcode/amd/cimx/sb800/SB800.h>
#include <stdint.h>
#include <stdlib.h>
@@ -63,11 +64,9 @@ static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *Confi
FcnData = Data;
ResetInfo = ConfigPtr;
/* Get SB800 MMIO Base (AcpiMmioAddr) */
- WriteIo8(0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
+ Data8 = pm_io_read8(0x27);
Data16 = Data8 << 8;
- WriteIo8(0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
+ Data8 = pm_io_read8(0x26);
Data16 |= Data8;
AcpiMmioAddr = (uint32_t)Data16 << 16;
Status = AGESA_UNSUPPORTED;
diff --git a/src/mainboard/jetway/nf81-t56n-lf/mainboard.c b/src/mainboard/jetway/nf81-t56n-lf/mainboard.c
index 0a12c3f66a..cbf75a49ce 100644
--- a/src/mainboard/jetway/nf81-t56n-lf/mainboard.c
+++ b/src/mainboard/jetway/nf81-t56n-lf/mainboard.c
@@ -128,12 +128,11 @@ static void mainboard_enable(struct device *dev)
/* enable GPP CLK0 thru CLK3 (interleaved) */
/* disable GPP CLK4 thru SLT_GFX_CLK */
- u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
- write8(misc_mem_clk_cntrl + 0, 0xFF);
- write8(misc_mem_clk_cntrl + 1, 0xFF);
- write8(misc_mem_clk_cntrl + 2, 0x00);
- write8(misc_mem_clk_cntrl + 3, 0x00);
- write8(misc_mem_clk_cntrl + 4, 0x00);
+ misc_write8(0, 0xff);
+ misc_write8(1, 0xff);
+ misc_write8(2, 0);
+ misc_write8(3, 0);
+ misc_write8(4, 0);
/*
* Initialize ASF registers to an arbitrary address because someone
diff --git a/src/mainboard/lippert/frontrunner-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/mainboard.c
index 6ad5234d81..9e3eab7a6c 100644
--- a/src/mainboard/lippert/frontrunner-af/mainboard.c
+++ b/src/mainboard/lippert/frontrunner-af/mainboard.c
@@ -59,32 +59,41 @@ static const u16 sio_init_table[] = { // hi = offset, lo = value
static void init(struct device *dev)
{
- volatile u8 *spi_base; // base addr of Hudson's SPI host controller
+ volatile u8 *spi_base; /* base addr of Hudson's SPI host controller */
int i;
printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__);
/* Init Hudson GPIOs. */
printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE);
- FCH_IOMUX(50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices
- FCH_GPIO (50) = 0xC0; // = output set to 1 as it's never needed
- FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS# = input (int. PU)
- FCH_IOMUX(56) = 1; // GPIO58-56: REV_ID2-0
- FCH_GPIO (56) = 0x28; // = inputs, disable int. pull-ups
- FCH_IOMUX(57) = 1;
- FCH_GPIO (57) = 0x28;
- FCH_IOMUX(58) = 1;
- FCH_GPIO (58) = 0x28;
- FCH_IOMUX(96) = 1; // "Gpio96": GEVENT0# signal on X2 connector (int. PU)
- FCH_IOMUX(52) = 1; // GPIO52,61,62,187-192 free to use on X2 connector
- FCH_IOMUX(61) = 2; // default to inputs with int. PU
- FCH_IOMUX(62) = 2;
- FCH_IOMUX(187) = 2;
- FCH_IOMUX(188) = 2;
- FCH_IOMUX(189) = 1;
- FCH_IOMUX(190) = 1;
- FCH_IOMUX(191) = 1;
- FCH_IOMUX(192) = 1;
- if (!fch_gpio_state(197)) // just in case anyone cares
+ /* GPIO50: FCH_ARST#_GATE resets stuck PCIe devices */
+ iomux_write8(50, 2);
+ /* output set to 1 as it's never needed */
+ iomux_write8(50, 0xc0);
+ /* GPIO197: BIOS_DEFAULTS# = input (int. PU) */
+ iomux_write8(197, 2);
+ /* GPIO58-56: REV_ID2-0 */
+ iomux_write8(56, 1);
+ /* inputs, disable int. pull-ups */
+ gpio_100_write8(56, 0x28);
+ iomux_write8(57, 1);
+ gpio_100_write8(57, 0x28);
+ iomux_write8(58, 1);
+ gpio_100_write8(58, 0x28);
+ /* "Gpio96": GEVENT0# signal on X2 connector (int. PU) */
+ iomux_write8(96, 1);
+ /* GPIO52,61,62,187-192 free to use on X2 connector */
+ iomux_write8(52, 1);
+ /* default to inputs with int. PU */
+ iomux_write8(61, 2);
+ iomux_write8(62, 2);
+ iomux_write8(187, 2);
+ iomux_write8(188, 2);
+ iomux_write8(189, 1);
+ iomux_write8(190, 1);
+ iomux_write8(191, 1);
+ iomux_write8(192, 1);
+ /* just in case anyone cares */
+ if (!fch_gpio_state(197))
printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n");
printk(BIOS_INFO, "Board revision ID: %u\n",
fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56));
@@ -99,9 +108,11 @@ static void init(struct device *dev)
/* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */
spi_base = (u8 *)((uintptr_t)pci_read_config32(pcidev_on_root(0x14, 3),
0xA0) & 0xFFFFFFE0);
- spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register
+ /* NormSpeed in SPI_Cntrl1 register */
+ spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20;
- /* Notify the SMC we're alive and kicking, or after a while it will
+ /*
+ * Notify the SMC we're alive and kicking, or after a while it will
* effect a power cycle and switch to the alternate BIOS chip.
* Should be done as late as possible.
* Failure here does not matter if watchdog was already disabled,
@@ -122,12 +133,11 @@ static void mainboard_enable(struct device *dev)
/* enable GPP CLK0 */
/* disable GPP CLK1 thru SLT_GFX_CLK */
- u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
- write8(misc_mem_clk_cntrl + 0, 0x0F);
- write8(misc_mem_clk_cntrl + 1, 0x00);
- write8(misc_mem_clk_cntrl + 2, 0x00);
- write8(misc_mem_clk_cntrl + 3, 0x00);
- write8(misc_mem_clk_cntrl + 4, 0x00);
+ misc_write8(0, 0x0f);
+ misc_write8(1, 0);
+ misc_write8(2, 0);
+ misc_write8(3, 0);
+ misc_write8(4, 0);
/*
* Initialize ASF registers to an arbitrary address because someone
diff --git a/src/mainboard/lippert/toucan-af/mainboard.c b/src/mainboard/lippert/toucan-af/mainboard.c
index 1c9c5a6b91..158613fcac 100644
--- a/src/mainboard/lippert/toucan-af/mainboard.c
+++ b/src/mainboard/lippert/toucan-af/mainboard.c
@@ -27,36 +27,52 @@
static void init(struct device *dev)
{
- volatile u8 *spi_base; // base addr of Hudson's SPI host controller
+ volatile u8 *spi_base; /* base addr of Hudson's SPI host controller */
printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__);
/* Init Hudson GPIOs. */
printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE);
- FCH_IOMUX(50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices
- FCH_GPIO (50) = 0xC0; // = output set to 1 as it's never needed
- FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS#
- FCH_GPIO (197) = 0x28; // = input, disable int. pull-up
- FCH_IOMUX(56) = 1; // GPIO58-56: REV_ID2-0
- FCH_GPIO (56) = 0x28; // = inputs, disable int. pull-ups
- FCH_IOMUX(57) = 1;
- FCH_GPIO (57) = 0x28;
- FCH_IOMUX(58) = 1;
- FCH_GPIO (58) = 0x28;
- FCH_IOMUX(187) = 2; // GPIO187,188,166,GPO160: GPO0-3 on COM Express connector
- FCH_GPIO (187) = 0x08; // = outputs, disable PUs, default to 0
- FCH_IOMUX(188) = 2;
- FCH_GPIO (188) = 0x08;
- FCH_IOMUX(166) = 2;
- FCH_GPIO (166) = 0x08;
- // needed to make GPO160 work (Hudson Register Reference section 2.3.6.1)
- FCH_PMIO(0xDC) &= ~0x80; FCH_PMIO(0xE6) = (FCH_PMIO(0xE6) & ~0x02) | 0x01;
- FCH_IOMUX(160) = 1;
- FCH_GPIO (160) = 0x08;
- FCH_IOMUX(189) = 1; // GPIO189-192: GPI0-3 on COM Express connector
- FCH_IOMUX(190) = 1; // default to inputs with int. PU
- FCH_IOMUX(191) = 1;
- FCH_IOMUX(192) = 1;
- if (!fch_gpio_state(197)) // just in case anyone cares
+ /* GPIO50: FCH_ARST#_GATE resets stuck PCIe devices */
+ iomux_write8(50, 2);
+ /* output set to 1 as it's never needed */
+ iomux_write8(50, 0xc0);
+ /* GPIO197: BIOS_DEFAULTS# = input (int. PU) */
+ iomux_write8(197, 2);
+ /* input, disable int. pull-up */
+ gpio_100_write8(197, 0x28);
+ /* GPIO58-56: REV_ID2-0 */
+ iomux_write8(56, 1);
+ /* inputs, disable int. pull-ups */
+ gpio_100_write8(56, 0x28);
+ iomux_write8(57, 1);
+ gpio_100_write8(57, 0x28);
+ iomux_write8(58, 1);
+ gpio_100_write8(58, 0x28);
+ /* GPIO187,188,166,GPO160: GPO0-3 on COM Express connector */
+ iomux_write8(187, 2);
+ /* outputs, disable PUs, default to 0 */
+ gpio_100_write8(187, 0x08);
+ iomux_write8(188, 2);
+ gpio_100_write8(188, 0x08);
+ iomux_write8(166, 2);
+ gpio_100_write8(166, 0x08);
+ /*
+ * needed to make GPO160 work (Hudson Register Reference
+ * section 2.3.6.1)
+ */
+ pm_write8(0xdc, pm_read8(0xdc) & (~0x80));
+ pm_write8(0xe6, (pm_read8(0xe6) & (~0x02)) | 1);
+ iomux_write8(160, 1);
+ gpio_100_write8(160, 0x08);
+ /* GPIO189-192: GPI0-3 on COM Express connector */
+ iomux_write8(189, 1);
+ /* default to inputs with int. PU */
+ iomux_write8(190, 1);
+ iomux_write8(191, 1);
+ iomux_write8(192, 1);
+
+ /* just in case anyone cares */
+ if (!fch_gpio_state(197))
printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n");
printk(BIOS_INFO, "Board revision ID: %u\n",
fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56));
@@ -64,9 +80,11 @@ static void init(struct device *dev)
/* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */
spi_base = (u8 *)((uintptr_t)pci_read_config32(pcidev_on_root(0x14, 3),
0xA0) & 0xFFFFFFE0);
- spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register
+ /* NormSpeed in SPI_Cntrl1 register */
+ spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20;
- /* Notify the SMC we're alive and kicking, or after a while it will
+ /*
+ * Notify the SMC we're alive and kicking, or after a while it will
* effect a power cycle and switch to the alternate BIOS chip.
* Should be done as late as possible.
* Failure here does not matter if watchdog was already disabled,
@@ -87,12 +105,11 @@ static void mainboard_enable(struct device *dev)
/* enable GPP CLK0 thru CLK1 */
/* disable GPP CLK2 thru SLT_GFX_CLK */
- u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
- write8(misc_mem_clk_cntrl + 0, 0xFF);
- write8(misc_mem_clk_cntrl + 1, 0x00);
- write8(misc_mem_clk_cntrl + 2, 0x00);
- write8(misc_mem_clk_cntrl + 3, 0x00);
- write8(misc_mem_clk_cntrl + 4, 0x00);
+ misc_write8(0, 0xff);
+ misc_write8(1, 0);
+ misc_write8(2, 0);
+ misc_write8(3, 0);
+ misc_write8(4, 0);
/*
* Initialize ASF registers to an arbitrary address because someone
diff --git a/src/mainboard/pcengines/apu1/gpio_ftns.c b/src/mainboard/pcengines/apu1/gpio_ftns.c
index 4e58d5593b..206dc63c9d 100644
--- a/src/mainboard/pcengines/apu1/gpio_ftns.c
+++ b/src/mainboard/pcengines/apu1/gpio_ftns.c
@@ -27,25 +27,21 @@ uintptr_t find_gpio_base(void)
return base_addr;
}
-void configure_gpio(uintptr_t base_addr, u32 gpio, u8 iomux_ftn, u8 setting)
+void configure_gpio(uintptr_t base_addr, u8 gpio, u8 iomux_ftn, u8 setting)
{
u8 bdata;
- u8 *memptr;
- memptr = (u8 *)(base_addr + IOMUX_OFFSET + gpio);
- *memptr = iomux_ftn;
+ iomux_write8(gpio, iomux_ftn);
- memptr = (u8 *)(base_addr + GPIO_OFFSET + gpio);
- bdata = *memptr;
+ bdata = gpio_100_read8(gpio);
bdata &= 0x07;
bdata |= setting; /* set direction and data value */
- *memptr = bdata;
+ gpio_100_write8(gpio, bdata);
}
-u8 read_gpio(uintptr_t base_addr, u32 gpio)
+u8 read_gpio(uintptr_t base_addr, u8 gpio)
{
- u8 *memptr = (u8 *)(base_addr + GPIO_OFFSET + gpio);
- return (*memptr & GPIO_DATA_IN) ? 1 : 0;
+ return (gpio_100_read8(gpio) & GPIO_DATA_IN) ? 1 : 0;
}
int get_spd_offset(void)
diff --git a/src/mainboard/pcengines/apu1/gpio_ftns.h b/src/mainboard/pcengines/apu1/gpio_ftns.h
index fce8afe6f0..fb582721d2 100644
--- a/src/mainboard/pcengines/apu1/gpio_ftns.h
+++ b/src/mainboard/pcengines/apu1/gpio_ftns.h
@@ -19,8 +19,8 @@
#include <stdint.h>
uintptr_t find_gpio_base(void);
-void configure_gpio(uintptr_t base_addr, u32 gpio, u8 iomux_ftn, u8 setting);
-u8 read_gpio(uintptr_t base_addr, u32 gpio);
+void configure_gpio(uintptr_t base_addr, u8 gpio, u8 iomux_ftn, u8 setting);
+u8 read_gpio(uintptr_t base_addr, u8 gpio);
int get_spd_offset(void);
#define IOMUX_OFFSET 0xD00
diff --git a/src/mainboard/pcengines/apu1/mainboard.c b/src/mainboard/pcengines/apu1/mainboard.c
index 854fb8ad4d..0528468e5d 100644
--- a/src/mainboard/pcengines/apu1/mainboard.c
+++ b/src/mainboard/pcengines/apu1/mainboard.c
@@ -14,6 +14,7 @@
* GNU General Public License for more details.
*/
+#include <amdblocks/acpimmio.h>
#include <console/console.h>
#include <device/device.h>
#include <device/mmio.h>
@@ -181,17 +182,17 @@ static void mainboard_enable(struct device *dev)
config_gpio_mux();
config_addon_uart();
- /* Power off unused clock pins of GPP PCIe devices */
- u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
- /* GPP CLK0-2 are connected to the 3 ethernet chips
- * GPP CLK3-4 are connected to the miniPCIe slots */
- write8(misc_mem_clk_cntrl + 0, 0x21);
- write8(misc_mem_clk_cntrl + 1, 0x43);
+ /* Power off unused clock pins of GPP PCIe devices
+ * GPP CLK0-2 are connected to the 3 ethernet chips
+ * GPP CLK3-4 are connected to the miniPCIe slots
+ */
+ misc_write8(0, 0x21);
+ misc_write8(1, 0x43);
/* GPP CLK5 is only connected to test pads -> disable */
- write8(misc_mem_clk_cntrl + 2, 0x05);
+ misc_write8(2, 0x05);
/* disable unconnected GPP CLK6-8 and SLT_GFX_CLK */
- write8(misc_mem_clk_cntrl + 3, 0x00);
- write8(misc_mem_clk_cntrl + 4, 0x00);
+ misc_write8(3, 0);
+ misc_write8(4, 0);
/* Initialize the PIRQ data structures for consumption */
pirq_setup();
diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.c b/src/mainboard/pcengines/apu2/gpio_ftns.c
index 249ecc3494..170acca8d3 100644
--- a/src/mainboard/pcengines/apu2/gpio_ftns.c
+++ b/src/mainboard/pcengines/apu2/gpio_ftns.c
@@ -14,55 +14,75 @@
*/
#include <stdint.h>
+#include <amdblocks/acpimmio.h>
+#include <console/console.h>
#include <device/mmio.h>
#include <FchPlatform.h>
#include "gpio_ftns.h"
-void configure_gpio(u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting)
+static u32 gpio_read_wrapper(u32 gpio)
+{
+ if (gpio < 0x100)
+ return gpio0_read32(gpio & 0xff);
+ else if (gpio >= 0x100 && gpio < 0x200)
+ return gpio1_read32(gpio & 0xff);
+ else if (gpio >= 0x200 && gpio < 0x300)
+ return gpio2_read32(gpio & 0xff);
+
+ die("Invalid GPIO");
+}
+
+static void gpio_write_wrapper(u32 gpio, u32 setting)
+{
+ if (gpio < 0x100)
+ gpio0_write32(gpio & 0xff, setting);
+ else if (gpio >= 0x100 && gpio < 0x200)
+ gpio1_write32(gpio & 0xff, setting);
+ else if (gpio >= 0x200 && gpio < 0x300)
+ gpio2_write32(gpio & 0xff, setting);
+}
+
+void configure_gpio(u8 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting)
{
u32 bdata;
- bdata = read32((const volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET
- + gpio));
+ bdata = gpio_read_wrapper(gpio);
/* out the data value to prevent glitches */
bdata |= (setting & GPIO_OUTPUT_ENABLE);
- write32((volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET + gpio), bdata);
+ gpio_write_wrapper(gpio, bdata);
/* set direction and data value */
bdata |= (setting & (GPIO_OUTPUT_ENABLE | GPIO_OUTPUT_VALUE
| GPIO_PULL_UP_ENABLE | GPIO_PULL_DOWN_ENABLE));
- write32((volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET + gpio), bdata);
+ gpio_write_wrapper(gpio, bdata);
- write8((volatile void *)(ACPI_MMIO_BASE + IOMUX_OFFSET + iomux_gpio),
- iomux_ftn & 0x3);
+ iomux_write8(iomux_gpio, iomux_ftn & 0x3);
}
u8 read_gpio(u32 gpio)
{
- u32 status = read32((const volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET
- + gpio));
-
- return (status & GPIO_PIN_STS) ? 1 : 0;
+ return (gpio_read_wrapper(gpio) & GPIO_PIN_STS) ? 1 : 0;
}
void write_gpio(u32 gpio, u8 value)
{
- u32 status = read32((const volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET
- + gpio));
+ u32 status = gpio_read_wrapper(gpio);
status &= ~GPIO_OUTPUT_VALUE;
status |= (value > 0) ? GPIO_OUTPUT_VALUE : 0;
- write32((volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET + gpio), status);
+ gpio_write_wrapper(gpio, status);
}
int get_spd_offset(void)
{
u8 index = 0;
- /* One SPD file contains all 4 options, determine which index to
+ /*
+ * One SPD file contains all 4 options, determine which index to
* read here, then call into the standard routines.
*/
- u8 *gpio_bank0_ptr = (u8 *)(ACPI_MMIO_BASE + GPIO_BANK0_BASE);
- if (*(gpio_bank0_ptr + (0x40 << 2) + 2) & BIT0) index |= BIT0;
- if (*(gpio_bank0_ptr + (0x41 << 2) + 2) & BIT0) index |= BIT1;
+ if (gpio1_read8(0x02) & BIT0)
+ index |= BIT0;
+ if (gpio1_read8(0x06) & BIT0)
+ index |= BIT1;
return index;
}
diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.h b/src/mainboard/pcengines/apu2/gpio_ftns.h
index 24d6a7f772..49169be121 100644
--- a/src/mainboard/pcengines/apu2/gpio_ftns.h
+++ b/src/mainboard/pcengines/apu2/gpio_ftns.h
@@ -16,7 +16,7 @@
#ifndef GPIO_FTNS_H
#define GPIO_FTNS_H
-void configure_gpio(u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting);
+void configure_gpio(u8 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting);
u8 read_gpio(u32 gpio);
void write_gpio(u32 gpio, u8 value);
int get_spd_offset(void);